Merge Intel Hardware Feedback Interface (HFI) thermal driver for
5.18-rc1 and update the intel-speed-select utility to support that
driver.
* thermal-hfi:
tools/power/x86/intel-speed-select: v1.12 release
tools/power/x86/intel-speed-select: HFI support
tools/power/x86/intel-speed-select: OOB daemon mode
thermal: intel: hfi: INTEL_HFI_THERMAL depends on NET
thermal: netlink: Fix parameter type of thermal_genl_cpu_capability_event() stub
thermal: intel: hfi: Notify user space for HFI events
thermal: netlink: Add a new event to notify CPU capabilities change
thermal: intel: hfi: Enable notification interrupt
thermal: intel: hfi: Handle CPU hotplug events
thermal: intel: hfi: Minimally initialize the Hardware Feedback Interface
x86/cpu: Add definitions for the Intel Hardware Feedback Interface
x86/Documentation: Describe the Intel Hardware Feedback Interface
Merge powerclamp thermal driver changes, int340x thermal driver changes
and thermal documentation changes for 5.18-rc1:
- Don't use bitmap_weight() in end_power_clamp() in the powerclamp
driver (Yury Norov).
- Update the OS policy capabilities handshake in the int340x thermal
driver (Srinivas Pandruvada).
- Increase the policies bitmap size in int340x (Srinivas Pandruvada).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
int340x thermal driver (Rafael Wysocki).
- Check for NULL after calling kmemdup() in int340x (Jiasheng Jiang).
- Add Intel Dynamic Power and Thermal Framework (DPTF) kernel interface
documentation (Srinivas Pandruvada).
- Fix bullet list warning in the thermal documentation (Randy Dunlap).
* thermal-powerclamp:
thermal: intel_powerclamp: don't use bitmap_weight() in end_power_clamp()
* thermal-int340x:
thermal: int340x: Update OS policy capability handshake
thermal: int340x: Increase bitmap size
thermal: Replace acpi_bus_get_device()
thermal: int340x: Check for NULL after calling kmemdup()
* thermal-docs:
Documentation: thermal: DPTF Documentation
thermal: fix Documentation bullet list warning
Update the firmware with OS supported policies mask, so that firmware can
relinquish its internal controls. Without this update several Tiger Lake
laptops gets performance limited with in few seconds of executing in
turbo region.
The existing way of enumerating firmware policies via IDSP method and
selecting policy by directly writing those policy UUIDS via _OSC method
is not supported in newer generation of hardware.
There is a new UUID "B23BA85D-C8B7-3542-88DE-8DE2FFCFD698" is defined for
updating policy capabilities. As part of ACPI _OSC method:
Arg0 - UUID: B23BA85D-C8B7-3542-88DE-8DE2FFCFD698
Arg1 - Rev ID: 1
Arg2 - Count: 2
Arg3 - Capability buffers: Array of Arg2 DWORDS
DWORD1: As defined in the ACPI 5.0 Specification
- Bit 0: Query Flag
- Bits 1-3: Always 0
- Bits 4-31: Reserved
DWORD2 and beyond:
- Bit0: set to 1 to indicate Intel(R) Dynamic Tuning is active, 0 to
indicate it is disabled and legacy thermal mechanism should
be enabled.
- Bit1: set to 1 to indicate Intel(R) Dynamic Tuning is controlling
active cooling, 0 to indicate bios shall enable legacy thermal
zone with active trip point.
- Bit2: set to 1 to indicate Intel(R) Dynamic Tuning is controlling
passive cooling, 0 to indicate bios shall enable legacy thermal
zone with passive trip point.
- Bit3: set to 1 to indicate Intel(R) Dynamic Tuning is handling
critical trip point, 0 to indicate bios shall enable legacy
thermal zone with critical trip point.
- Bits 4:31: Reserved
From sysfs interface, there is an existing interface to update policy
UUID using attribute "current_uuid". User space can write the same UUID
for ACTIVE, PASSIVE and CRITICAL policy. Driver converts these UUIDs to
DWORD2 Bit 1 to Bit 3. When any of the policy is activated by user
space it is assumed that dynamic tuning is active.
For example
$cd /sys/bus/platform/devices/INTC1040:00/uuids
To support active policy
$echo "3A95C389-E4B8-4629-A526-C52C88626BAE" > current_uuid
To support passive policy
$echo "42A441D6-AE6A-462b-A84B-4A8CE79027D3" > current_uuid
To support critical policy
$echo "97C68AE7-15FA-499c-B8C9-5DA81D606E0A" > current_uuid
To check all the supported policies
$cat current_uuid
3A95C389-E4B8-4629-A526-C52C88626BAE
42A441D6-AE6A-462b-A84B-4A8CE79027D3
97C68AE7-15FA-499c-B8C9-5DA81D606E0A
To match the bit format for DWORD2, rearranged enum int3400_thermal_uuid
and int3400_thermal_uuids[] by swapping current INT3400_THERMAL_ACTIVE
and INT3400_THERMAL_PASSIVE_1.
If the policies are enumerated via IDSP method then legacy method is
used, if not the new method is used to update policy support.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The number of policies are 10, so can't be supported by the bitmap size
of u8.
Even though there are no platfoms with these many policies, but
for correctness increase to u32.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 16fc8eca19 ("thermal/int340x_thermal: Add additional UUIDs")
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Utilize platform_get_irq_optional() to silence these messages:
brcmstb_thermal a581500.thermal: IRQ index 0 not found
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220301181412.2008044-1-f.fainelli@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The return value from tegra_bpmp_transfer indicates the success or
failure of the IPC transaction with BPMP. If the transaction
succeeded, we also need to check the actual command's result code.
Add code to do this.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210915085517.1669675-1-mperttunen@nvidia.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Expose ti-soc-thermal thermal sensors as HWMON devices.
# sensors
cpu_thermal-virtual-0
Adapter: Virtual device
temp1: +54.2 C (crit = +105.0 C)
dspeve_thermal-virtual-0
Adapter: Virtual device
temp1: +51.4 C (crit = +105.0 C)
gpu_thermal-virtual-0
Adapter: Virtual device
temp1: +54.2 C (crit = +105.0 C)
iva_thermal-virtual-0
Adapter: Virtual device
temp1: +54.6 C (crit = +105.0 C)
core_thermal-virtual-0
Adapter: Virtual device
temp1: +52.6 C (crit = +105.0 C)
Similar to imx_sc_thermal d2bc4dd91d.
No need to take care of thermal_remove_hwmon_sysfs() since
devm_thermal_add_hwmon_sysfs() (a wrapper around devres) is
used. See c7fc403e40.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Link: https://lore.kernel.org/r/20220218104725.2718904-1-romain.naour@smile.fr
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add compatible to support LMh for sm8150 SoC.
sm8150 does not require explicit enabling for various LMh subsystems.
Add a variable indicating the same as match data which is set for sdm845.
Execute the piece of code enabling various LMh subsystems only if
enable algorithm match data is present.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220106173138.411097-2-thara.gopinath@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Register thermal zones as hwmon sensors to let userspace read
CPU temperatures using standard hwmon interface.
Acked-by: Amit Kucheria <amitk@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220129180750.1882310-1-dmitry.baryshkov@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Do not call get_trip_hyst() from thermal_genl_cmd_tz_get_trip() if
the thermal zone does not define one.
Fixes: 1ce50e7d40 ("thermal: core: genetlink support for events/cmd/sampling")
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
THERMAL_NETLINK depends on NET and since 'select' does not follow
any dependency chain, INTEL_HFI_THERMAL also should depend on NET.
Fix one Kconfig warning and 48 subsequent build errors:
WARNING: unmet direct dependencies detected for THERMAL_NETLINK
Depends on [n]: THERMAL [=y] && NET [=n]
Selected by [y]:
- INTEL_HFI_THERMAL [=y] && THERMAL [=y] && (X86 [=y] || X86_INTEL_QUARK [=n] || COMPILE_TEST [=y]) && CPU_SUP_INTEL [=y] && X86_THERMAL_VECTOR [=y]
Fixes: bd30cdfd9b ("thermal: intel: hfi: Notify user space for HFI events")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When building with CONFIG_THERMAL_NETLINK=n, there is a spew of warnings
along the lines of:
In file included from drivers/thermal/thermal_core.c:27:
In file included from drivers/thermal/thermal_core.h:15:
drivers/thermal/thermal_netlink.h:113:71: warning: declaration of 'struct cpu_capability' will not be visible outside of this function [-Wvisibility]
static inline int thermal_genl_cpu_capability_event(int count, struct cpu_capability *caps)
^
1 warning generated.
'struct cpu_capability' is not forward declared anywhere in the header.
As it turns out, this should really be 'struct thermal_genl_cpu_caps',
which silences the warning and makes the parameter types of the stub
match the full function.
Fixes: e4b1eb24ce ("thermal: netlink: Add a new event to notify CPU capabilities change")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace acpi_bus_get_device() that is going to be dropped with
acpi_fetch_acpi_dev().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Don't call bitmap_weight() if the following code can get by
without it.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As the potential failure of the allocation, kmemdup() may return NULL.
Then, 'bin_attr_data_vault.private' will be NULL, but
'bin_attr_data_vault.size' is not 0, which is not consistent.
Therefore, it is better to check the return value of kmemdup() to
avoid the confusion.
Fixes: 0ba13c763a ("thermal/int340x_thermal: Export GDDV")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When the hardware issues an HFI event, relay a notification to user space.
This allows user space to respond by reading performance and efficiency of
each CPU and take appropriate action.
For example, when the performance and efficiency of a CPU is 0, user space
can either offline the CPU or inject idle. Also, if user space notices a
downward trend in performance, it may proactively adjust power limits to
avoid future situations in which performance drops to 0.
To avoid excessive notifications, the rate is limited by one HZ per event.
To limit the netlink message size, send parameters for up to 16 CPUs in a
single message. If there are more than 16 CPUs, issue as many messages as
needed to notify the status of all CPUs.
In the HFI specification, both performance and efficiency capabilities are
defined in the [0, 255] range. The existing implementations of HFI hardware
do not scale the maximum values to 255. Since userspace cares about
capability values that are either 0 or show a downward/upward trend, this
fact does not matter much. Relative changes in capabilities are enough. To
comply with the thermal netlink ABI, scale both performance and efficiency
capabilities to the [0, 1023] interval.
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a new netlink event to notify change in CPU capabilities in terms of
performance and efficiency.
Firmware may change CPU capabilities as a result of thermal events in the
system or to account for changes in the TDP (thermal design power) level.
This notification type will allow user space to avoid running workloads
on certain CPUs or proactively adjust power limits to avoid future events.
The netlink message consists of a nested attribute
(THERMAL_GENL_ATTR_CPU_CAPABILITY) with three attributes:
* THERMAL_GENL_ATTR_CPU_CAPABILITY_ID (type u32):
-- logical CPU number
* THERMAL_GENL_ATTR_CPU_CAPABILITY_PERFORMANCE (type u32):
-- Scaled performance from 0-1023
* THERMAL_GENL_ATTR_CPU_CAPABILITY_EFFICIENCY (type u32):
-- Scaled efficiency from 0-1023
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When hardware wants to inform the operating system about updates in the HFI
table, it issues a package-level thermal event interrupt. For this,
hardware has new interrupt and status bits in the IA32_PACKAGE_THERM_
INTERRUPT and IA32_PACKAGE_THERM_STATUS registers. The existing thermal
throttle driver already handles thermal event interrupts: it initializes
the thermal vector of the local APIC as well as per-CPU and package-level
interrupt reporting. It also provides routines to service such interrupts.
Extend its functionality to also handle HFI interrupts.
The frequency of the thermal HFI interrupt is specific to each processor
model. On some processors, a single interrupt happens as soon as the HFI is
enabled and hardware will never update HFI capabilities afterwards. On
other processors, thermal and power constraints may cause thermal HFI
interrupts every tens of milliseconds.
To not overwhelm consumers of the HFI data, use delayed work to throttle
the rate at which HFI updates are processed. Use a dedicated workqueue to
not overload system_wq if hardware issues many HFI updates.
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
All CPUs in a package are represented in an HFI table. There exists an
HFI table per package. Thus, CPUs in a package need to coordinate to
initialize and access the table. Do such coordination during CPU hotplug.
Use the first CPU to come online in a package to initialize the HFI
instance and the data structure representing it. Other CPUs in the same
package need only to register or unregister themselves in that data
structure.
The HFI depends on both the package-level thermal management and the local
APIC thermal local vector. Thus, to ensure that a CPU coming online has an
associated HFI instance when the hardware issues an HFI event, enable the
HFI only after having enabled the local APIC thermal vector. The thermal
throttle driver takes care of the needed package-level initialization.
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Intel Hardware Feedback Interface provides guidance to the operating
system about the performance and energy efficiency capabilities of each
CPU in the system. Capabilities are numbers between 0 and 255 where a
higher number represents a higher capability. For each CPU, energy
efficiency and performance are reported as separate capabilities.
Hardware computes these capabilities based on the operating conditions of
the system such as power and thermal limits. These capabilities are shared
with the operating system in a table resident in memory. Each package in
the system has its own HFI instance. Every logical CPU in the package is
represented in the table. More than one logical CPUs may be represented in
a single table entry. When the hardware updates the table, it generates a
package-level thermal interrupt.
The size and format of the HFI table depend on the supported features and
can only be determined at runtime. To minimally initialize the HFI, parse
its features and allocate one instance per package of a data structure with
the necessary parameters to read and navigate a local copy (i.e., owned by
the driver) of individual HFI tables.
A subsequent changeset will provide per-CPU initialization and interrupt
handling.
Reviewed-by: Len Brown <len.brown@intel.com>
Co-developed by: Aubrey Li <aubrey.li@linux.intel.com>
Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add Raptor Lake PCI ID for processor thermal device.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add Raptor Lake ACPI IDs for DPTF devices.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Add new TSU driver and DT bindings for the Renesas RZ/G2L platform
(Biju Das).
- Fix missing check when calling reset_control_deassert() in the
rz2gl thermal driver (Biju Das).
- In preparation for FORTIFY_SOURCE performing compile-time and
run-time field bounds checking for memcpy(), avoid intentionally
writing across neighboring fields in the int340x thermal control
driver (Kees Cook).
- Fix RFIM mailbox write commands handling in the int340x thermal
control driver (Sumeet Pawnikar).
- Fix PM issue occurring in the iMX thermal control driver during
suspend/resume by implementing PM runtime support in it (Oleksij
Rempel).
- Add 'const' annotation to thermal_cooling_ops in the Intel
powerclamp driver (Rikard Falkeborn).
- Fix missing ADC bit set in the iMX8MP thermal driver to enable the
sensor (Paul Gerber).
- Drop unused local variable definition from tmon (ran jianping).
-----BEGIN PGP SIGNATURE-----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=Crok
-----END PGP SIGNATURE-----
Merge tag 'thermal-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add a new driver for Renesas RZ/G2L TSU, update a few existing
thermal control drivers and clean up the tmon utility.
Specifics:
- Add new TSU driver and DT bindings for the Renesas RZ/G2L platform
(Biju Das).
- Fix missing check when calling reset_control_deassert() in the
rz2gl thermal driver (Biju Das).
- In preparation for FORTIFY_SOURCE performing compile-time and
run-time field bounds checking for memcpy(), avoid intentionally
writing across neighboring fields in the int340x thermal control
driver (Kees Cook).
- Fix RFIM mailbox write commands handling in the int340x thermal
control driver (Sumeet Pawnikar).
- Fix PM issue occurring in the iMX thermal control driver during
suspend/resume by implementing PM runtime support in it (Oleksij
Rempel).
- Add 'const' annotation to thermal_cooling_ops in the Intel
powerclamp driver (Rikard Falkeborn).
- Fix missing ADC bit set in the iMX8MP thermal driver to enable the
sensor (Paul Gerber).
- Drop unused local variable definition from tmon (ran jianping)"
* tag 'thermal-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/int340x: Fix RFIM mailbox write commands
thermal/drivers/rz2gl: Add error check for reset_control_deassert()
thermal/drivers/imx8mm: Enable ADC when enabling monitor
thermal/drivers: Add TSU driver for RZ/G2L
dt-bindings: thermal: Document Renesas RZ/G2L TSU
thermal/drivers/intel_powerclamp: Constify static thermal_cooling_device_ops
thermal/drivers/imx: Implement runtime PM support
thermal: tools: tmon: remove unneeded local variable
thermal: int340x: Use struct_group() for memcpy() region
The existing mail mechanism only supports writing of workload types.
However, mailbox command for RFIM (cmd = 0x08) also requires write
operation which is ignored. This results in failing to store RFI
restriction.
Fixint this requires enhancing mailbox writes for non workload
commands too, so remove the check for MBOX_CMD_WORKLOAD_TYPE_WRITE
in mailbox write to allow this other write commands to be supoorted.
At the same time, however, we have to make sure that there is no
impact on read commands, by avoiding to write anything into the
mailbox data register.
To properly implement that, add two separate functions for mbox read
and write commands for the processor thermal workload command type.
This helps to distinguish the read and write workload command types
from each other while sending mbox commands.
Fixes: 5d6fbc96bd ("thermal/drivers/int340x: processor_thermal: Export additional attributes")
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Cc: 5.14+ <stable@vger.kernel.org> # 5.14+
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull ARM cpufreq updates for 5.17-rc1 from Viresh Kumar:
"- Qcom cpufreq driver updates improve irq support (Ard Biesheuvel, Stephen Boyd,
and Vladimir Zapolskiy).
- Fixes double devm_remap for mediatek driver (Hector Yuan).
- Introduces thermal pressure helpers (Lukasz Luba)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: mediatek-hw: Fix double devm_remap in hotplug case
cpufreq: qcom-hw: Use optional irq API
cpufreq: qcom-hw: Set CPU affinity of dcvsh interrupts
cpufreq: qcom-hw: Fix probable nested interrupt handling
cpufreq: qcom-cpufreq-hw: Avoid stack buffer for IRQ name
arch_topology: Remove unused topology_set_thermal_pressure() and related
cpufreq: qcom-cpufreq-hw: Use new thermal pressure update function
cpufreq: qcom-cpufreq-hw: Update offline CPUs per-cpu thermal pressure
thermal: cpufreq_cooling: Use new thermal pressure update function
arch_topology: Introduce thermal pressure update function
implementing PM runtime support (Oleksij Rempel)
- Add 'const' annotation to the thermal_cooling_ops in the Intel
powerclamp driver (Rikard Falkeborn)
- Add TSU driver and bindings for the RZ/G2L platform (Biju Das)
- Fix the missing ADC bit set on iMX8MP to enable the sensor (Paul
Gerber)
- Fix missing check when calling reset_control_deassert() (Biju Das)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmHEmTsACgkQqDIjiipP
6E/KMgf+MdzK/OTuxP+pf0yVqpC3WpH6lrNhBRC+mO4S0yAe8ZlYCFVVtvMftSrn
M2H8uxw74XlVkD8yi1kSYa1iVeD9jF+5ZViOybc83SKwryYEFI7tjxsjpaPFotxe
ZnL8y55hDC63YpwNeafGgW9M/JFehBP09zafakdVsvzzNGP8XKoYQcgyeofwNIrX
CRwU95K85k0eS2h9gPFPRWaNwZS4ubVEYr857oiGArX4/hEycvJ2UO+cH+zEmGjQ
QKJIEh5gQEBs2lKgcqUwzNbitm5lUG+rYRWD9omQ4QLtHK/fxZw2CMMVnNso/G5z
lslc8pLLwLh5QdR3v9tX4+OAxsV38A==
=uIVF
-----END PGP SIGNATURE-----
Merge tag 'thermal-v5.17-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal control material for 5.17-rc1 from Daniel Lezcano:
- Fix PM issue on the iMX driver when suspend/resume is happening by
implementing PM runtime support (Oleksij Rempel)
- Add 'const' annotation to the thermal_cooling_ops in the Intel
powerclamp driver (Rikard Falkeborn)
- Add TSU driver and bindings for the RZ/G2L platform (Biju Das)
- Fix missing ADC bit set on iMX8MP to enable the sensor (Paul Gerber)
- Fix missing check when calling reset_control_deassert() (Biju Das)
* tag 'thermal-v5.17-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/rz2gl: Add error check for reset_control_deassert()
thermal/drivers/imx8mm: Enable ADC when enabling monitor
thermal/drivers: Add TSU driver for RZ/G2L
dt-bindings: thermal: Document Renesas RZ/G2L TSU
thermal/drivers/intel_powerclamp: Constify static thermal_cooling_device_ops
thermal/drivers/imx: Implement runtime PM support
If reset_control_deassert() fails, then we won't be able to access
the device registers. Therefore check the return code of
reset_control_deassert() and bail out in case of error.
While at it replace the parameter "&pdev->dev" -> "dev" in
devm_reset_control_get_exclusive().
Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20211208164010.4130-1-biju.das.jz@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The VCoRefLow CPU FIVR register definition for Tiger Lake is incorrect.
Current implementation reads it from MMIO offset 0x5A18 and bit
offset [12:14], but the actual correct register definition is from
bit offset [11:13].
Update to fix the bit offset.
Fixes: 473be51142 ("thermal: int340x: processor_thermal: Add RFIM driver")
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Cc: 5.14+ <stable@vger.kernel.org> # 5.14+
[ rjw: New subject, changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The i.MX 8MP has a ADC_PD bit in the TMU_TER register that controls the
operating mode of the ADC:
* 0 means normal operating mode
* 1 means power down mode
When enabling/disabling the TMU, the ADC operating mode must be set
accordingly.
i.MX 8M Mini & Nano are lacking this bit.
Signed-off-by: Paul Gerber <Paul.Gerber@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Fixes: 2b8f1f0337 ("thermal: imx8mm: Add i.MX8MP support")
Link: https://lore.kernel.org/r/20211122114225.196280-1-alexander.stein@ew.tq-group.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The RZ/G2L SoC incorporates a thermal sensor unit (TSU) that measures the
temperature inside the LSI.
The thermal sensor in this unit measures temperatures in the range from
−40 degree Celsius to 125 degree Celsius with an accuracy of ±3°C. The
TSU repeats measurement at 20 microseconds intervals and automatically
updates the results of measurement.
The TSU has no interrupts as well as no external pins.
This patch adds Thermal Sensor Unit(TSU) driver for RZ/G2L SoC.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211130155757.17837-3-biju.das.jz@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The only usage of powerclamp_cooling_ops is to pass its address to
thermal_cooling_device_register(), which takes a pointer to const struct
thermal_cooling_device_ops. Make it const to allow the compiler to put
it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20211128214641.30953-1-rikard.falkeborn@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Starting with commit d92ed2c9d3 ("thermal: imx: Use driver's local
data to decide whether to run a measurement") this driver stared using
irq_enabled flag to make decision to power on/off the thermal
core. This triggered a regression, where after reaching critical
temperature, alarm IRQ handler set irq_enabled to false, disabled
thermal core and was not able read temperature and disable cooling
sequence.
In case the cooling device is "CPU/GPU freq", the system will run with
reduce performance until next reboot.
To solve this issue, we need to move all parts implementing hand made
runtime power management and let it handle actual runtime PM framework.
Fixes: d92ed2c9d3 ("thermal: imx: Use driver's local data to decide whether to run a measurement")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Tested-by: Petr Beneš <petr.benes@ysoft.com>
Link: https://lore.kernel.org/r/20211117103426.81813-1-o.rempel@pengutronix.de
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
In preparation for FORTIFY_SOURCE performing compile-time and
run-time field bounds checking for memcpy(), avoid intentionally
writing across neighboring fields.
Use struct_group() in struct art around members weight, and
ac[0-9]_max, so they can be referenced together. This will allow
memcpy() and sizeof() to more easily reason about sizes, improve
readability, and avoid future warnings about writing beyond the
end of weight.
"pahole" shows no size nor member offset changes to struct art.
"objdump -d" shows no meaningful object code changes (i.e. only
source line number induced differences).
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Thermal pressure provides a new API, which allows to use CPU frequency
as an argument. That removes the need of local conversion to capacity.
Use this new function and remove old conversion code.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
During the suspend is in process, thermal_zone_device_update bails out
thermal zone re-evaluation for any sensor trip violation without
setting next valid trip to that sensor. It assumes during resume
it will re-evaluate same thermal zone and update trip. But when it is
in suspend temperature goes down and on resume path while updating
thermal zone if temperature is less than previously violated trip,
thermal zone set trip function evaluates the same previous high and
previous low trip as new high and low trip. Since there is no change
in high/low trip, it bails out from thermal zone set trip API without
setting any trip. It leads to a case where sensor high trip or low
trip is disabled forever even though thermal zone has a valid high
or low trip.
During thermal zone device init, reset thermal zone previous high
and low trip. It resolves above mentioned scenario.
Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
32-bit processors cannot generally access 64-bit MMIO registers
atomically, and it is unknown in which order the two halves of
this registers would need to be read:
drivers/thermal/intel/int340x_thermal/processor_thermal_mbox.c: In function 'send_mbox_cmd':
drivers/thermal/intel/int340x_thermal/processor_thermal_mbox.c:79:37: error: implicit declaration of function 'readq'; did you mean 'readl'? [-Werror=implicit-function-declaration]
79 | *cmd_resp = readq((void __iomem *) (proc_priv->mmio_base + MBOX_OFFSET_DATA));
| ^~~~~
| readl
The driver already does not build for anything other than x86,
so limit it further to x86-64.
Fixes: aeb58c860d ("thermal/drivers/int340x: processor_thermal: Suppot 64 bit RFIM responses")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit aeb58c860d ("thermal/drivers/int340x: processor_thermal: Suppot
64 bit RFIM responses") started using 'readq()' to read 64-bit status
responses from the int340x hardware.
That's all fine and good, but on 32-bit targets a 64-bit 'readq()' is
ambiguous, since it's no longer an atomic access. Some hardware might
require 64-bit accesses, and other hardware might want low word first or
high word first.
It's quite likely that the driver isn't relevant in a 32-bit environment
any more, and there's a patch floating around to just make it depend on
X86_64, but let's make it buildable on x86-32 anyway.
The driver previously just read the low 32 bits, so the hardware
certainly is ok with 32-bit reads, and in a little-endian environment
the low word first model is the natural one.
So just add the include for the 'io-64-nonatomic-lo-hi.h' version.
Fixes: aeb58c860d ("thermal/drivers/int340x: processor_thermal: Suppot 64 bit RFIM responses")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use pr_warn_once() instead of pr_warn() to print the user space
governor deprecation message in user_space_bind() to reduce the
kernel log noise.
Fixes: 0275c9fb0e ("thermal/core: Make the userspace governor deprecated")
Reported-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
of_parse_thermal_zones() parses the thermal-zones node and registers a
thermal_zone device for each subnode. However, if a thermal zone is
consuming a thermal sensor and that thermal sensor device hasn't probed
yet, an attempt to set trip_point_*_temp for that thermal zone device
can cause a NULL pointer dereference. Fix it.
console:/sys/class/thermal/thermal_zone87 # echo 120000 > trip_point_0_temp
...
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
...
Call trace:
of_thermal_set_trip_temp+0x40/0xc4
trip_point_temp_store+0xc0/0x1dc
dev_attr_store+0x38/0x88
sysfs_kf_write+0x64/0xc0
kernfs_fop_write_iter+0x108/0x1d0
vfs_write+0x2f4/0x368
ksys_write+0x7c/0xec
__arm64_sys_write+0x20/0x30
el0_svc_common.llvm.7279915941325364641+0xbc/0x1bc
do_el0_svc+0x28/0xa0
el0_svc+0x14/0x24
el0_sync_handler+0x88/0xec
el0_sync+0x1c0/0x200
While at it, fix the possible NULL pointer dereference in other
functions as well: of_thermal_get_temp(), of_thermal_set_emul_temp(),
of_thermal_get_trend().
Suggested-by: David Collins <quic_collinsd@quicinc.com>
Signed-off-by: Subbaraman Narayanamurthy <quic_subbaram@quicinc.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some of the RFIM mail box command returns 64 bit values. So enhance
mailbox interface to return 64 bit values and use them for RFIM
commands.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 5d6fbc96bd ("thermal/drivers/int340x: processor_thermal: Export additional attributes")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The cooling devices have their cooling device set_cur_state
read-writable all the time in the sysfs directory, thus allowing the
userspace to act on it.
The thermal framework is wrongly used by userspace as a power capping
framework by acting on the cooling device opaque state. This one then
competes with the in-kernel governor decision.
We have seen in out-of-tree kernels, a big number of devices which are
abusely declaring themselves as cooling device just to act on their
power.
The role of the thermal framework is to protect the junction
temperature of the silicon. Letting the userspace to play with a
cooling device is invalid and potentially dangerous.
The powercap framework is the right framework to do power capping and
moreover it deals with the aggregation via the dev pm qos.
As the userspace governor is marked deprecated and about to be
removed, there is no point to keep this file writable also in the
future.
Emit a warning and deprecate the interface.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20211019163506.2831454-2-daniel.lezcano@linaro.org
The userspace governor is sending temperature when polling is active
and trip point crossed events. Nothing else.
AFAICT, this governor is used with custom kernels making the userspace
governor co-existing with another governor on the same thermal zone
because there was no notification mechanism, implying a hack in the
framework to support this configuration.
The new netlink thermal notification is able to provide more
information than the userspace governor and give the opportunity to
the users of this governor to replace it by a dedicated notification
framework.
The userspace governor will be removed as its usage is no longer
needed.
Add a warning message to tell the userspace governor is deprecated.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20211019163506.2831454-1-daniel.lezcano@linaro.org
Rafael J. Wysocki