This patch drops the requirement that we can only switch workers if work
has not been queued by using RCU for the vq based queueing paths and a
mutex for the device wide flush.
We can also use this to support SIGKILL properly in the future where we
should exit almost immediately after getting that signal. With this
patch, when get_signal returns true, we can set the vq->worker to NULL
and do a synchronize_rcu to prevent new work from being queued to the
vhost_task that has been killed.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-18-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For vhost-scsi with 3 vqs or more and a workload that tries to use
them in parallel like:
fio --filename=/dev/sdb --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=128 --numjobs=3
the single vhost worker thread will become a bottlneck and we are stuck
at around 500K IOPs no matter how many jobs, virtqueues, and CPUs are
used.
To better utilize virtqueues and available CPUs, this patch allows
userspace to create workers and bind them to vqs. You can have N workers
per dev and also share N workers with M vqs on that dev.
This patch adds the interface related code and the next patch will hook
vhost-scsi into it. The patches do not try to hook net and vsock into
the interface because:
1. multiple workers don't seem to help vsock. The problem is that with
only 2 virtqueues we never fully use the existing worker when doing
bidirectional tests. This seems to match vhost-scsi where we don't see
the worker as a bottleneck until 3 virtqueues are used.
2. net already has a way to use multiple workers.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-16-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This new ioctl adds support for resuming the device from userspace.
This is required when trying to restore the device in a functioning
state after it's been suspended. It is already possible to reset a
suspended device, but that means the device must be reconfigured and
all the IOMMU/IOTLB mappings must be recreated. This new operation
allows the device to be resumed without going through a full reset.
This is particularly useful when trying to perform offline migration of
a virtual machine (also known as snapshot/restore) as it allows the VMM
to resume the virtual machine back to a running state after the snapshot
is performed.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Message-Id: <73b75fb87d25cff59768b4955a81fe7ffe5b4770.1672742878.git.sebastien.boeuf@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
The ioctl adds support for suspending the device from userspace.
This is a must before getting virtqueue indexes (base) for live migration,
since the device could modify them after userland gets them. There are
individual ways to perform that action for some devices
(VHOST_NET_SET_BACKEND, VHOST_VSOCK_SET_RUNNING, ...) but there was no
way to perform it for any vhost device (and, in particular, vhost-vdpa).
After a successful return of the ioctl call the device must not process
more virtqueue descriptors. The device can answer to read or writes of
config fields as if it were not suspended. In particular, writing to
"queue_enable" with a value of 1 will not make the device start
processing buffers of the virtqueue.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220810171512.2343333-4-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Follows the vDPA support for associating ASID to a specific virtqueue
group. This patch adds a uAPI to support setting them from userspace.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-15-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Follows the support for virtqueue group in vDPA. This patches
introduces uAPI to get the virtqueue group ID for a specific virtqueue
in vhost-vdpa.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-14-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces the uAPI for getting the number of address
spaces supported by this vDPA device.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-13-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Follows the vDPA support for multiple address spaces, this patch
introduce uAPI for the userspace to know the number of virtqueue
groups supported by the vDPA device.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-12-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We should store feature bits in vhost_types.h as what has been done
for e.g VHOST_F_LOG_ALL.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-2-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- GET_VQS_COUNT: the count of virtqueues that exposed
Signed-off-by: Longpeng <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20220315032553.455-4-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Longpeng <<a href="mailto:longpeng2@huawei.com" target="_blank">longpeng2@huawei.com</a>><br>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
- GET_CONFIG_SIZE: return the size of the virtio config space.
The size contains the fields which are conditional on feature
bits.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Longpeng <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20220315032553.455-2-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
This patch introduces a new ioctl for vhost-vdpa device that can
report the iova range by the device.
For device that implements get_iova_range() method, we fetch it from
the vDPA device. If device doesn't implement get_iova_range() but
depends on platform IOMMU, we will query via DOMAIN_ATTR_GEOMETRY,
otherwise [0, ULLONG_MAX] is assumed.
For safety, this patch also rules out the map request which is not in
the valid range.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20201023090043.14430-3-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patches extend the vhost IOTLB API to accept batch updating hints
form userspace. When userspace wants update the device IOTLB in a
batch, it may do:
1) Write vhost_iotlb_msg with VHOST_IOTLB_BATCH_BEGIN flag
2) Perform a batch of IOTLB updating via VHOST_IOTLB_UPDATE/INVALIDATE
3) Write vhost_iotlb_msg with VHOST_IOTLB_BATCH_END flag
Vhost-vdpa may decide to batch the IOMMU/IOTLB updating in step 3 when
vDPA device support set_map() ops. This is useful for the vDPA device
that want to know all the mappings to tweak their own DMA translation
logic.
For vDPA device that doesn't require set_map(), no behavior changes.
This capability is advertised via VHOST_BACKEND_F_IOTLB_BATCH capability.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200804162048.22587-5-eli@mellanox.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces a vDPA-based vhost backend. This backend is
built on top of the same interface defined in virtio-vDPA and provides
a generic vhost interface for userspace to accelerate the virtio
devices in guest.
This backend is implemented as a vDPA device driver on top of the same
ops used in virtio-vDPA. It will create char device entry named
vhost-vdpa-$index for userspace to use. Userspace can use vhost ioctls
on top of this char device to setup the backend.
Vhost ioctls are extended to make it type agnostic and behave like a
virtio device, this help to eliminate type specific API like what
vhost_net/scsi/vsock did:
- VHOST_VDPA_GET_DEVICE_ID: get the virtio device ID which is defined
by virtio specification to differ from different type of devices
- VHOST_VDPA_GET_VRING_NUM: get the maximum size of virtqueue
supported by the vDPA device
- VHSOT_VDPA_SET/GET_STATUS: set and get virtio status of vDPA device
- VHOST_VDPA_SET/GET_CONFIG: access virtio config space
- VHOST_VDPA_SET_VRING_ENABLE: enable a specific virtqueue
For memory mapping, IOTLB API is mandated for vhost-vDPA which means
userspace drivers are required to use
VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE to add or remove mapping for
a specific userspace memory region.
The vhost-vDPA API is designed to be type agnostic, but it allows net
device only in current stage. Due to the lacking of control virtqueue
support, some features were filter out by vhost-vdpa.
We will enable more features and devices in the near future.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200326140125.19794-8-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost structs are shared by vhost-kernel and vhost-user. Split them
into a separate file to ease copying them into programs that implement
either the server or the client side of vhost-user.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The _IOC_READ flag fits this ioctl request more because this request
actually only writes to, but doesn't read from userspace.
See NOTEs in include/uapi/asm-generic/ioctl.h for more information.
Fixes: 429711aec2 ("vhost: switch to use new message format")
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We use to have message like:
struct vhost_msg {
int type;
union {
struct vhost_iotlb_msg iotlb;
__u8 padding[64];
};
};
Unfortunately, there will be a hole of 32bit in 64bit machine because
of the alignment. This leads a different formats between 32bit API and
64bit API. What's more it will break 32bit program running on 64bit
machine.
So fixing this by introducing a new message type with an explicit
32bit reserved field after type like:
struct vhost_msg_v2 {
__u32 type;
__u32 reserved;
union {
struct vhost_iotlb_msg iotlb;
__u8 padding[64];
};
};
We will have a consistent ABI after switching to use this. To enable
this capability, introduce a new ioctl (VHOST_SET_BAKCEND_FEATURE) for
userspace to enable this feature (VHOST_BACKEND_F_IOTLB_V2).
Fixes: 6b1e6cc785 ("vhost: new device IOTLB API")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Many user space API headers are missing licensing information, which
makes it hard for compliance tools to determine the correct license.
By default are files without license information under the default
license of the kernel, which is GPLV2. Marking them GPLV2 would exclude
them from being included in non GPLV2 code, which is obviously not
intended. The user space API headers fall under the syscall exception
which is in the kernels COPYING file:
NOTE! This copyright does *not* cover user programs that use kernel
services by normal system calls - this is merely considered normal use
of the kernel, and does *not* fall under the heading of "derived work".
otherwise syscall usage would not be possible.
Update the files which contain no license information with an SPDX
license identifier. The chosen identifier is 'GPL-2.0 WITH
Linux-syscall-note' which is the officially assigned identifier for the
Linux syscall exception. SPDX license identifiers are a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne. See the previous patch in this series for the
methodology of how this patch was researched.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch tries to implement an device IOTLB for vhost. This could be
used with userspace(qemu) implementation of DMA remapping
to emulate an IOMMU for the guest.
The idea is simple, cache the translation in a software device IOTLB
(which is implemented as an interval tree) in vhost and use vhost_net
file descriptor for reporting IOTLB miss and IOTLB
update/invalidation. When vhost meets an IOTLB miss, the fault
address, size and access can be read from the file. After userspace
finishes the translation, it writes the translated address to the
vhost_net file to update the device IOTLB.
When device IOTLB is enabled by setting VIRTIO_F_IOMMU_PLATFORM all vq
addresses set by ioctl are treated as iova instead of virtual address and
the accessing can only be done through IOTLB instead of direct userspace
memory access. Before each round or vq processing, all vq metadata is
prefetched in device IOTLB to make sure no translation fault happens
during vq processing.
In most cases, virtqueues are contiguous even in virtual address space.
The IOTLB translation for virtqueue itself may make it a little
slower. We might add fast path cache on top of this patch.
Signed-off-by: Jason Wang <jasowang@redhat.com>
[mst: use virtio feature bit: VHOST_F_DEVICE_IOTLB -> VIRTIO_F_IOMMU_PLATFORM ]
[mst: fix build warnings ]
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
[ weiyj.lk: missing unlock on error ]
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
VM sockets vhost transport implementation. This driver runs on the
host.
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch tries to poll for new added tx buffer or socket receive
queue for a while at the end of tx/rx processing. The maximum time
spent on polling were specified through a new kind of vring ioctl.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch brings cross-endian support to vhost when used to implement
legacy virtio devices. Since it is a relatively rare situation, the
feature availability is controlled by a kernel config option (not set
by default).
The vq->is_le boolean field is added to cache the endianness to be
used for ring accesses. It defaults to native endian, as expected
by legacy virtio devices. When the ring gets active, we force little
endian if the device is modern. When the ring is deactivated, we
revert to the native endian default.
If cross-endian was compiled in, a vq->user_be boolean field is added
so that userspace may request a specific endianness. This field is
used to override the default when activating the ring of a legacy
device. It has no effect on modern devices.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
move uapi parts to vhost.h
move .c private parts to .c itself
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Asias He <asias@redhat.com>
Acked-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
Mike Christie