Two fixes for rc5:
* Fix inode initialization to make sure that the inode flags are all
cleared.
* Use zone reset operation instead of close to make sure that the zone
of an empty sequential file in never in an active state after closing
the file.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYmjSewAKCRDdoc3SxdoY
dqd+APkBb/phIqK21E1x1KIXe51WTeL4mhkc0dwkQ6vRGcZOfAEA6cW++S7X1Sqo
JqORCus5FZEfs59NhI6TBD6BtsIZ9wc=
=hCgn
-----END PGP SIGNATURE-----
Merge tag 'zonefs-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fixes from Damien Le Moal:
"Two fixes for rc5:
- Fix inode initialization to make sure that the inode flags are all
cleared.
- Use zone reset operation instead of close to make sure that the
zone of an empty sequential file in never in an active state after
closing the file"
* tag 'zonefs-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Fix management of open zones
zonefs: Clear inode information flags on inode creation
* Fix a possible data corruption of the 'part' field in mtd_info
Rawnand fixes:
* Fix the check on the return value of wait_for_completion_timeout
* Fix wrong ECC parameters for mt7622
* Fix a possible memory corruption that might panic in the Qcom driver
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmJpD0cACgkQJWrqGEe9
VoRjRwgAj31KV9OhfKupvj5QWqsB/06kyKElkJJJFibLPT/tPlS5iY6o/UMUlCAy
hUw8yYMOrSN2JySYHiDvifJBbRZPrJmAnY8CkC5uvCx7E9yzRpSbmdSSZTjKk2S0
4eml5JSV0iVKIX5sZ6CMMKZMB9b2peoWi9ebT+hBYndof8CT8d8cki0Yj/W/DGVA
+PuT6l4zJNII8NsrR+lGTyCTiw2DUuUn0sudBCj+LU7gBl16bD4Oxj9s2c6N6TuC
grze+yeq0AqntS2gaiIsmRHShd/gpTfd4OAYkifpvclUYMGlfy2i038eTsuLLMfA
/mUa/sEPQkhG5TlHZvNtHf73QBVK3g==
=gnxP
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
"Core fix:
- Fix a possible data corruption of the 'part' field in mtd_info
Rawnand fixes:
- Fix the check on the return value of wait_for_completion_timeout
- Fix wrong ECC parameters for mt7622
- Fix a possible memory corruption that might panic in the Qcom
driver"
* tag 'mtd/fixes-for-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: qcom: fix memory corruption that causes panic
mtd: fix 'part' field data corruption in mtd_info
mtd: rawnand: Fix return value check of wait_for_completion_timeout
mtd: rawnand: fix ecc parameters for mt7622
Minh Yuan reported a concurrency use-after-free issue in the floppy code
between raw_cmd_ioctl and seek_interrupt.
[ It turns out this has been around, and that others have reported the
KASAN splats over the years, but Minh Yuan had a reproducer for it and
so gets primary credit for reporting it for this fix - Linus ]
The problem is, this driver tends to break very easily and nowadays,
nobody is expected to use FDRAWCMD anyway since it was used to
manipulate non-standard formats. The risk of breaking the driver is
higher than the risk presented by this race, and accessing the device
requires privileges anyway.
Let's just add a config option to completely disable this ioctl and
leave it disabled by default. Distros shouldn't use it, and only those
running on antique hardware might need to enable it.
Link: https://lore.kernel.org/all/000000000000b71cdd05d703f6bf@google.com/
Link: https://lore.kernel.org/lkml/CAKcFiNC=MfYVW-Jt9A3=FPJpTwCD2PL_ULNCpsCVE5s8ZeBQgQ@mail.gmail.com
Link: https://lore.kernel.org/all/CAEAjamu1FRhz6StCe_55XY5s389ZP_xmCF69k987En+1z53=eg@mail.gmail.com
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Reported-by: syzbot+8e8958586909d62b6840@syzkaller.appspotmail.com
Reported-by: cruise k <cruise4k@gmail.com>
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Tested-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sparse reports this issue
core.c: note: in included file:
core.h:239:12: warning: symbol 'pmc_lpm_modes' was not declared. Should it be static?
Global variables should not be defined in headers. This only works
because core.h is only included by core.c. Single file use
variables should be static, so change its storage-class specifier
to static.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220423123048.591405-1-trix@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix bug that added an offset to the mailbox addr during multi-packet
reads. Did not affect current ABI since it doesn't support multi-packet
transactions.
Fixes: 2546c60004 ("platform/x86: Add Intel Software Defined Silicon driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220420155622.1763633-4-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Due to change in firmware flow, update mailbox writes to poll on ready bit
instead of run_busy bit. This change makes the polling method consistent
for both writes and reads, which also uses the ready bit.
Fixes: 2546c60004 ("platform/x86: Add Intel Software Defined Silicon driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220420155622.1763633-3-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
To prevent an agent from indefinitely holding the mailbox firmware has
implemented a leaky bucket algorithm. Repeated access to the mailbox may
now incur a delay of up to 2.1 seconds. Add a retry loop that tries for
up to 2.5 seconds to acquire the mailbox.
Fixes: 2546c60004 ("platform/x86: Add Intel Software Defined Silicon driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220420155622.1763633-2-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Loading this driver in guests results in unchecked MSR access error for
MSR 0x620.
There is no use of reading and modifying package/die scope uncore MSRs
in guests. So check for CPU feature X86_FEATURE_HYPERVISOR to prevent
loading of this driver in guests.
Fixes: dbce412a77 ("platform/x86/intel-uncore-freq: Split common and enumeration part")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215870
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220427100304.2562990-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This works on my system.
Signed-off-by: Darryn Anton Jordan <darrynjordan@icloud.com>
Acked-by: Thomas Weißschuh <thomas@weissschuh.net>
Link: https://lore.kernel.org/r/Ylguq87YG+9L3foV@hark
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Latitude 7520 supports AC timeouts, but it has no KBD_LED_AC_TOKEN
and so changes to stop_timeout appear to have no effect if the laptop
is plugged in.
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20220426120827.12363-1-gabriele.mzt@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Before this commit fan_curve_check_present() was trying to not cause
the probe to fail on devices without fan curve control by testing for
known error codes returned by asus_wmi_evaluate_method_buf().
Checking for ENODATA or ENODEV, with the latter being returned by this
function when an ACPI integer with a value of ASUS_WMI_UNSUPPORTED_METHOD
is returned. But for other ACPI integer returns this function just returns
them as is, including the ASUS_WMI_DSTS_UNKNOWN_BIT value of 2.
On the Asus U36SD ASUS_WMI_DSTS_UNKNOWN_BIT gets returned, leading to:
asus-nb-wmi: probe of asus-nb-wmi failed with error 2
Instead of playing whack a mole with error codes here, simply treat all
errors as there not being any fan curves, fixing the driver no longer
loading on the Asus U36SD laptop.
Fixes: e3d13da7f7 ("platform/x86: asus-wmi: Fix regression when probing for fan curve control")
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2079125
Cc: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220427114956.332919-1-hdegoede@redhat.com
This code tests for if the obj->buffer.length is larger than the buffer
but then it just does the memcpy() anyway.
Fixes: 0f0ac158d2 ("platform/x86: asus-wmi: Add support for custom fan curves")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220413073744.GB8812@kili
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
`nf_flowtable_udp_timeout` sysctl option is available only
if CONFIG_NFT_FLOW_OFFLOAD enabled. But infra for this flow
offload UDP timeout was added under CONFIG_NF_FLOW_TABLE
config option. So, if you have CONFIG_NFT_FLOW_OFFLOAD
disabled and CONFIG_NF_FLOW_TABLE enabled, the
`nf_flowtable_udp_timeout` is not present in sysfs.
Please note, that TCP flow offload timeout sysctl option
is present even CONFIG_NFT_FLOW_OFFLOAD is disabled.
I suppose it was a typo in commit that adds UDP flow offload
timeout and CONFIG_NF_FLOW_TABLE should be used instead.
Fixes: 975c57504d ("netfilter: conntrack: Introduce udp offload timeout configuration")
Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Jaco Kroon reported tcp problems that Eric Dumazet and Neal Cardwell
pinpointed to nf_conntrack tcp_in_window() bug.
tcp trace shows following sequence:
I > R Flags [S], seq 3451342529, win 62580, options [.. tfo [|tcp]>
R > I Flags [S.], seq 2699962254, ack 3451342530, win 65535, options [..]
R > I Flags [P.], seq 1:89, ack 1, [..]
Note 3rd ACK is from responder to initiator so following branch is taken:
} else if (((state->state == TCP_CONNTRACK_SYN_SENT
&& dir == IP_CT_DIR_ORIGINAL)
|| (state->state == TCP_CONNTRACK_SYN_RECV
&& dir == IP_CT_DIR_REPLY))
&& after(end, sender->td_end)) {
... because state == TCP_CONNTRACK_SYN_RECV and dir is REPLY.
This causes the scaling factor to be reset to 0: window scale option
is only present in syn(ack) packets. This in turn makes nf_conntrack
mark valid packets as out-of-window.
This was always broken, it exists even in original commit where
window tracking was added to ip_conntrack (nf_conntrack predecessor)
in 2.6.9-rc1 kernel.
Restrict to 'tcph->syn', just like the 3rd condtional added in
commit 82b72cb946 ("netfilter: conntrack: re-init state for retransmitted syn-ack").
Upon closer look, those conditionals/branches can be merged:
Because earlier checks prevent syn-ack from showing up in
original direction, the 'dir' checks in the conditional quoted above are
redundant, remove them. Return early for pure syn retransmitted in reply
direction (simultaneous open).
Fixes: 9fb9cbb108 ("[NETFILTER]: Add nf_conntrack subsystem.")
Reported-by: Jaco Kroon <jaco@uls.co.za>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-04-26
This series contains updates to ice driver only.
Ivan Vecera removes races related to VF message processing by changing
mutex_trylock() call to mutex_lock() and moving additional operations
to occur under mutex.
Petr Oros increases wait time after firmware flash as current time is
not sufficient.
Jake resolves a use-after-free issue for mailbox snapshot.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 4b5923249b ("net: dsa: lantiq_gswip: Configure all remaining
GSWIP_MII_CFG bits") added all known bits in the GSWIP_MII_CFGp
register. It helped bring this register into a well-defined state so the
driver has to rely less on the bootloader to do things right.
Unfortunately it also sets the GSWIP_MII_CFG_RMII_CLK bit without any
possibility to configure it. Upon further testing it turns out that all
boards which are supported by the GSWIP driver in OpenWrt which use an
RMII PHY have a dedicated oscillator on the board which provides the
50MHz RMII reference clock.
Don't set the GSWIP_MII_CFG_RMII_CLK bit (but keep the code which always
clears it) to fix support for the Fritz!Box 7362 SL in OpenWrt. This is
a board with two Atheros AR8030 RMII PHYs. With the "RMII clock" bit set
the MAC also generates the RMII reference clock whose signal then
conflicts with the signal from the oscillator on the board. This results
in a constant cycle of the PHY detecting link up/down (and as a result
of that: the two ports using the AR8030 PHYs are not working).
At the time of writing this patch there's no known board where the MAC
(GSWIP) has to generate the RMII reference clock. If needed this can be
implemented in future by providing a device-tree flag so the
GSWIP_MII_CFG_RMII_CLK bit can be toggled per port.
Fixes: 4b5923249b ("net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits")
Tested-by: Jan Hoffmann <jan@3e8.eu>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://lore.kernel.org/r/20220425152027.2220750-1-martin.blumenstingl@googlemail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The macro dev_core_stats_##FIELD##_inc() disables preemption and invokes
netdev_core_stats_alloc() to return a per-CPU pointer.
netdev_core_stats_alloc() will allocate memory on its first invocation
which breaks on PREEMPT_RT because it requires non-atomic context for
memory allocation.
This can be avoided by enabling preemption in netdev_core_stats_alloc()
assuming the caller always disables preemption.
It might be better to replace local_inc() with this_cpu_inc() now that
dev_core_stats_##FIELD##_inc() gained a preempt-disable section and does
not rely on already disabled preemption. This results in less
instructions on x86-64:
local_inc:
| incl %gs:__preempt_count(%rip) # __preempt_count
| movq 488(%rdi), %rax # _1->core_stats, _22
| testq %rax, %rax # _22
| je .L585 #,
| add %gs:this_cpu_off(%rip), %rax # this_cpu_off, tcp_ptr__
| .L586:
| testq %rax, %rax # _27
| je .L587 #,
| incq (%rax) # _6->a.counter
| .L587:
| decl %gs:__preempt_count(%rip) # __preempt_count
this_cpu_inc(), this patch:
| movq 488(%rdi), %rax # _1->core_stats, _5
| testq %rax, %rax # _5
| je .L591 #,
| .L585:
| incq %gs:(%rax) # _18->rx_dropped
Use unsigned long as type for the counter. Use this_cpu_inc() to
increment the counter. Use a plain read of the counter.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/YmbO0pxgtKpCw4SY@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix some register offsets on Intel Alderlake
- Fix the order the UFS and SDC pins on Qualcomm SM6350
- Fix a build error in Mediatek Moore.
- Fix a pin function table in the Sunplus SP7021.
- Fix some Kconfig and static keywords on the Samsung
Tesla FSD SoC.
- Fix up the EOI function for edge triggered IRQs and keep
the block clock enabled for level IRQs in the
STM32 driver.
- Fix some bits and order in the Rockchip RK3308 driver.
- Handle the errorpath in the Pistachio driver probe()
properly.
-----BEGIN PGP SIGNATURE-----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=xFvm
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix some register offsets on Intel Alderlake
- Fix the order the UFS and SDC pins on Qualcomm SM6350
- Fix a build error in Mediatek Moore.
- Fix a pin function table in the Sunplus SP7021.
- Fix some Kconfig and static keywords on the Samsung Tesla FSD SoC.
- Fix up the EOI function for edge triggered IRQs and keep the block
clock enabled for level IRQs in the STM32 driver.
- Fix some bits and order in the Rockchip RK3308 driver.
- Handle the errorpath in the Pistachio driver probe() properly.
* tag 'pinctrl-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: pistachio: fix use of irq_of_parse_and_map()
pinctrl: stm32: Keep pinctrl block clock enabled when LEVEL IRQ requested
pinctrl: rockchip: sort the rk3308_mux_recalced_data entries
pinctrl: rockchip: fix RK3308 pinmux bits
pinctrl: stm32: Do not call stm32_gpio_get() for edge triggered IRQs in EOI
pinctrl: Fix an error in pin-function table of SP7021
pinctrl: samsung: fix missing GPIOLIB on ARM64 Exynos config
pinctrl: mediatek: moore: Fix build error
pinctrl: qcom: sm6350: fix order of UFS & SDC pins
pinctrl: alderlake: Fix register offsets for ADL-N variant
pinctrl: samsung: staticize fsd_pin_ctrl
A bunch of outstanding fbdev patches - all trivial and small:
neofb:
Fix the check of 'var->pixclock'
kyro, vt8623fb, tridentfb, arkfb, s3fb, i740fb:
Error out if 'lineclock' equals zero
sis:
Fix potential NULL dereference in sisfb_post_sis300()
fb.h:
Spelling fix: palette/palette/
pm2fb:
Fix kernel-doc formatting issue
clps711x-fb:
Use syscon_regmap_lookup_by_phandle()
of:
display_timing: Remove a redundant zeroing of memory
aty & matrox:
Cleanup for powerpc's asm/prom.h
sh_mobile_lcdcfb:
Remove sh_mobile_lcdc_check_var() declaration
mmp:
Replace usage of found with dedicated list iterator variable
omap:
Make it CCF clk API compatible
imxfb:
Fix missing of_node_put in imxfb_probe
i740fb:
Use memset_io() to clear screen
udlfb:
Properly check endpoint type
pxafb:
Use if else instead
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYmbo3gAKCRD3ErUQojoP
XzuBAQCTKo9GRy2J0kEeSTDUrw+RQ649z5DSqkv07gXU/4eFVwD/at0HVXD7eHCR
d550YxqFodM7B9bHBJu4YSSKMg4c0AA=
=ANZe
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes and updates from Helge Deller:
"A bunch of outstanding fbdev patches - all trivial and small"
* tag 'for-5.18/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
video: fbdev: clps711x-fb: Use syscon_regmap_lookup_by_phandle
video: fbdev: mmp: replace usage of found with dedicated list iterator variable
video: fbdev: sh_mobile_lcdcfb: Remove sh_mobile_lcdc_check_var() declaration
video: fbdev: i740fb: Error out if 'pixclock' equals zero
video: fbdev: i740fb: use memset_io() to clear screen
video: fbdev: s3fb: Error out if 'pixclock' equals zero
video: fbdev: arkfb: Error out if 'pixclock' equals zero
video: fbdev: tridentfb: Error out if 'pixclock' equals zero
video: fbdev: vt8623fb: Error out if 'pixclock' equals zero
video: fbdev: kyro: Error out if 'lineclock' equals zero
video: fbdev: neofb: Fix the check of 'var->pixclock'
video: fbdev: imxfb: Fix missing of_node_put in imxfb_probe
video: fbdev: omap: Make it CCF clk API compatible
video: fbdev: aty/matrox/...: Prepare cleanup of powerpc's asm/prom.h
video: fbdev: pm2fb: Fix a kernel-doc formatting issue
linux/fb.h: Spelling s/palette/palette/
video: fbdev: sis: fix potential NULL dereference in sisfb_post_sis300()
video: fbdev: pxafb: use if else instead
video: fbdev: udlfb: properly check endpoint type
video: fbdev: of: display_timing: Remove a redundant zeroing of memory
- Only re-check for direct I/O writes past the end of the file after
re-acquiring the inode glock.
-----BEGIN PGP SIGNATURE-----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=mqGR
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v5.18-rc4-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fix from Andreas Gruenbacher:
- Only re-check for direct I/O writes past the end of the file after
re-acquiring the inode glock.
* tag 'gfs2-v5.18-rc4-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Don't re-check for write past EOF unnecessarily
This attempts to cleanup the hci_conn if it cannot be aborted as
otherwise it would likely result in having the controller and host
stack out of sync with respect to connection handle.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-----BEGIN PGP SIGNATURE-----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=xDWz
-----END PGP SIGNATURE-----
Merge tag 'for-5.18-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- direct IO fixes:
- restore passing file offset to correctly calculate checksums
when repairing on read and bio split happens
- use correct bio when sumitting IO on zoned filesystem
- zoned mode fixes:
- fix selection of device to correctly calculate device
capabilities when allocating a new bio
- use a dedicated lock for exclusion during relocation
- fix leaked plug after failure syncing log
- fix assertion during scrub and relocation
* tag 'for-5.18-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: use dedicated lock for data relocation
btrfs: fix assertion failure during scrub due to block group reallocation
btrfs: fix direct I/O writes for split bios on zoned devices
btrfs: fix direct I/O read repair for split bios
btrfs: fix and document the zoned device choice in alloc_new_bio
btrfs: fix leaked plug after failure syncing log on zoned filesystems
It is useless to create a hci_conn object if on error status as the
result would be it being freed in the process and anyway it is likely
the result of controller and host stack being out of sync.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Commit d5ebaa7c5f introduces checks for handle range
(e.g HCI_CONN_HANDLE_MAX) but controllers like Intel AX200 don't seem
to respect the valid range int case of error status:
> HCI Event: Connect Complete (0x03) plen 11
Status: Page Timeout (0x04)
Handle: 65535
Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&
Sound Products Inc)
Link type: ACL (0x01)
Encryption: Disabled (0x00)
[1644965.827560] Bluetooth: hci0: Ignoring HCI_Connection_Complete for invalid handle
Because of it is impossible to cleanup the connections properly since
the stack would attempt to cancel the connection which is no longer in
progress causing the following trace:
< HCI Command: Create Connection Cancel (0x01|0x0008) plen 6
Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&
Sound Products Inc)
= bluetoothd: src/profile.c:record_cb() Unable to get Hands-Free Voice
gateway SDP record: Connection timed out
> HCI Event: Command Complete (0x0e) plen 10
Create Connection Cancel (0x01|0x0008) ncmd 1
Status: Unknown Connection Identifier (0x02)
Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&
Sound Products Inc)
< HCI Command: Create Connection Cancel (0x01|0x0008) plen 6
Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&
Sound Products Inc)
Fixes: d5ebaa7c5f ("Bluetooth: hci_event: Ignore multiple conn complete events")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
We need to wait 5 s for EMP reset after firmware flash. Code was extracted
from OOT driver (ice v1.8.3 downloaded from sourceforge). Without this
wait, fw_activate let card in inconsistent state and recoverable only
by second flash/activate. Flash was tested on these fw's:
From -> To
3.00 -> 3.10/3.20
3.10 -> 3.00/3.20
3.20 -> 3.00/3.10
Reproducer:
[root@host ~]# devlink dev flash pci/0000:ca:00.0 file E810_XXVDA4_FH_O_SEC_FW_1p6p1p9_NVM_3p10_PLDMoMCTP_0.11_8000AD7B.bin
Preparing to flash
[fw.mgmt] Erasing
[fw.mgmt] Erasing done
[fw.mgmt] Flashing 100%
[fw.mgmt] Flashing done 100%
[fw.undi] Erasing
[fw.undi] Erasing done
[fw.undi] Flashing 100%
[fw.undi] Flashing done 100%
[fw.netlist] Erasing
[fw.netlist] Erasing done
[fw.netlist] Flashing 100%
[fw.netlist] Flashing done 100%
Activate new firmware by devlink reload
[root@host ~]# devlink dev reload pci/0000:ca:00.0 action fw_activate
reload_actions_performed:
fw_activate
[root@host ~]# ip link show ens7f0
71: ens7f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether b4:96:91:dc:72:e0 brd ff:ff:ff:ff:ff:ff
altname enp202s0f0
dmesg after flash:
[ 55.120788] ice: Copyright (c) 2018, Intel Corporation.
[ 55.274734] ice 0000:ca:00.0: Get PHY capabilities failed status = -5, continuing anyway
[ 55.569797] ice 0000:ca:00.0: The DDP package was successfully loaded: ICE OS Default Package version 1.3.28.0
[ 55.603629] ice 0000:ca:00.0: Get PHY capability failed.
[ 55.608951] ice 0000:ca:00.0: ice_init_nvm_phy_type failed: -5
[ 55.647348] ice 0000:ca:00.0: PTP init successful
[ 55.675536] ice 0000:ca:00.0: DCB is enabled in the hardware, max number of TCs supported on this port are 8
[ 55.685365] ice 0000:ca:00.0: FW LLDP is disabled, DCBx/LLDP in SW mode.
[ 55.692179] ice 0000:ca:00.0: Commit DCB Configuration to the hardware
[ 55.701382] ice 0000:ca:00.0: 126.024 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x8 link at 0000:c9:02.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
Reboot doesn’t help, only second flash/activate with OOT or patched
driver put card back in consistent state.
After patch:
[root@host ~]# devlink dev flash pci/0000:ca:00.0 file E810_XXVDA4_FH_O_SEC_FW_1p6p1p9_NVM_3p10_PLDMoMCTP_0.11_8000AD7B.bin
Preparing to flash
[fw.mgmt] Erasing
[fw.mgmt] Erasing done
[fw.mgmt] Flashing 100%
[fw.mgmt] Flashing done 100%
[fw.undi] Erasing
[fw.undi] Erasing done
[fw.undi] Flashing 100%
[fw.undi] Flashing done 100%
[fw.netlist] Erasing
[fw.netlist] Erasing done
[fw.netlist] Flashing 100%
[fw.netlist] Flashing done 100%
Activate new firmware by devlink reload
[root@host ~]# devlink dev reload pci/0000:ca:00.0 action fw_activate
reload_actions_performed:
fw_activate
[root@host ~]# ip link show ens7f0
19: ens7f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether b4:96:91:dc:72:e0 brd ff:ff:ff:ff:ff:ff
altname enp202s0f0
Fixes: 399e27dbbd ("ice: support immediate firmware activation via devlink reload")
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Previous patch labelled "ice: Fix incorrect locking in
ice_vc_process_vf_msg()" fixed an issue with ignored messages
sent by VF driver but a small race window still left.
Recently caught trace during 'ip link set ... vf 0 vlan ...' operation:
[ 7332.995625] ice 0000:3b:00.0: Clearing port VLAN on VF 0
[ 7333.001023] iavf 0000:3b:01.0: Reset indication received from the PF
[ 7333.007391] iavf 0000:3b:01.0: Scheduling reset task
[ 7333.059575] iavf 0000:3b:01.0: PF returned error -5 (IAVF_ERR_PARAM) to our request 3
[ 7333.059626] ice 0000:3b:00.0: Invalid message from VF 0, opcode 3, len 4, error -1
Setting of VLAN for VF causes a reset of the affected VF using
ice_reset_vf() function that runs with cfg_lock taken:
1. ice_notify_vf_reset() informs IAVF driver that reset is needed and
IAVF schedules its own reset procedure
2. Bit ICE_VF_STATE_DIS is set in vf->vf_state
3. Misc initialization steps
4. ice_sriov_post_vsi_rebuild() -> ice_vf_set_initialized() and that
clears ICE_VF_STATE_DIS in vf->vf_state
Step 3 is mentioned race window because IAVF reset procedure runs in
parallel and one of its step is sending of VIRTCHNL_OP_GET_VF_RESOURCES
message (opcode==3). This message is handled in ice_vc_process_vf_msg()
and if it is received during the mentioned race window then it's
marked as invalid and error is returned to VF driver.
Protect vf_state check in ice_vc_process_vf_msg() by cfg_lock to avoid
this race condition.
Fixes: e6ba5273d4 ("ice: Fix race conditions between virtchnl handling and VF ndo ops")
Tested-by: Fei Liu <feliu@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Usage of mutex_trylock() in ice_vc_process_vf_msg() is incorrect
because message sent from VF is ignored and never processed.
Use mutex_lock() instead to fix the issue. It is safe because this
mutex is used to prevent races between VF related NDOs and
handlers processing request messages from VF and these handlers
are running in ice_service_task() context. Additionally move this
mutex lock prior ice_vc_is_opcode_allowed() call to avoid potential
races during allowlist access.
Fixes: e6ba5273d4 ("ice: Fix race conditions between virtchnl handling and VF ndo ops")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The recent kernel change in 73f9b911fa ("kprobes: Use rethook for kretprobe
if possible"), introduced a potential NULL pointer dereference bug in the
KRETPROBE mechanism. The official Kprobes documentation defines that "Any or
all handlers can be NULL". Unfortunately, there is a missing return handler
verification to fulfill these requirements and can result in a NULL pointer
dereference bug.
This patch adds such verification in kretprobe_rethook_handler() function.
Fixes: 73f9b911fa ("kprobes: Use rethook for kretprobe if possible")
Signed-off-by: Adam Zabrocki <pi3@pi3.com.pl>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Anil S. Keshavamurthy <anil.s.keshavamurthy@intel.com>
Link: https://lore.kernel.org/bpf/20220422164027.GA7862@pi3.com.pl
Only re-check for direct I/O writes past the end of the file after
re-acquiring the inode glock.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
commit b4bdc4fbf8 ("soc: sunxi: Deal with the MBUS DMA offsets in a
central place") added a platform device notifier that sets the DMA
offset for all of the display engine frontend and backend devices.
The code applying the offset to DMA buffer physical addresses was then
removed from the backend driver in commit 756668ba68 ("drm/sun4i:
backend: Remove the MBUS quirks"), but the code subtracting PHYS_OFFSET
was left in the frontend driver.
As a result, the offset was applied twice in the frontend driver. This
likely went unnoticed because it only affects specific configurations
(scaling or certain pixel formats) where the frontend is used, on boards
with both one of these older SoCs and more than 1 GB of DRAM.
In addition, the references to PHYS_OFFSET prevent compiling the driver
on architectures where PHYS_OFFSET is not defined.
Fixes: b4bdc4fbf8 ("soc: sunxi: Deal with the MBUS DMA offsets in a central place")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-4-samuel@sholland.org
We received a report[1] of kernel crashes when Cilium is used in XDP
mode with virtio_net after updating to newer kernels. After
investigating the reason it turned out that when using mergeable bufs
with an XDP program which adjusts xdp.data or xdp.data_meta page_to_buf()
calculates the build_skb address wrong because the offset can become less
than the headroom so it gets the address of the previous page (-X bytes
depending on how lower offset is):
page_to_skb: page addr ffff9eb2923e2000 buf ffff9eb2923e1ffc offset 252 headroom 256
This is a pr_err() I added in the beginning of page_to_skb which clearly
shows offset that is less than headroom by adding 4 bytes of metadata
via an xdp prog. The calculations done are:
receive_mergeable():
headroom = VIRTIO_XDP_HEADROOM; // VIRTIO_XDP_HEADROOM == 256 bytes
offset = xdp.data - page_address(xdp_page) -
vi->hdr_len - metasize;
page_to_skb():
p = page_address(page) + offset;
...
buf = p - headroom;
Now buf goes -4 bytes from the page's starting address as can be seen
above which is set as skb->head and skb->data by build_skb later. Depending
on what's done with the skb (when it's freed most often) we get all kinds
of corruptions and BUG_ON() triggers in mm[2]. We have to recalculate
the new headroom after the xdp program has run, similar to how offset
and len are recalculated. Headroom is directly related to
data_hard_start, data and data_meta, so we use them to get the new size.
The result is correct (similar pr_err() in page_to_skb, one case of
xdp_page and one case of virtnet buf):
a) Case with 4 bytes of metadata
[ 115.949641] page_to_skb: page addr ffff8b4dcfad2000 offset 252 headroom 252
[ 121.084105] page_to_skb: page addr ffff8b4dcf018000 offset 20732 headroom 252
b) Case of pushing data +32 bytes
[ 153.181401] page_to_skb: page addr ffff8b4dd0c4d000 offset 288 headroom 288
[ 158.480421] page_to_skb: page addr ffff8b4dd00b0000 offset 24864 headroom 288
c) Case of pushing data -33 bytes
[ 835.906830] page_to_skb: page addr ffff8b4dd3270000 offset 223 headroom 223
[ 840.839910] page_to_skb: page addr ffff8b4dcdd68000 offset 12511 headroom 223
Offset and headroom are equal because offset points to the start of
reserved bytes for the virtio_net header which are at buf start +
headroom, while data points at buf start + vnet hdr size + headroom so
when data or data_meta are adjusted by the xdp prog both the headroom size
and the offset change equally. We can use data_hard_start to compute the
new headroom after the xdp prog (linearized / page start case, the
virtnet buf case is similar just with bigger base offset):
xdp.data_hard_start = page_address + vnet_hdr
xdp.data = page_address + vnet_hdr + headroom
new headroom after xdp prog = xdp.data - xdp.data_hard_start - metasize
An example reproducer xdp prog[3] is below.
[1] https://github.com/cilium/cilium/issues/19453
[2] Two of the many traces:
[ 40.437400] BUG: Bad page state in process swapper/0 pfn:14940
[ 40.916726] BUG: Bad page state in process systemd-resolve pfn:053b7
[ 41.300891] kernel BUG at include/linux/mm.h:720!
[ 41.301801] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 41.302784] CPU: 1 PID: 1181 Comm: kubelet Kdump: loaded Tainted: G B W 5.18.0-rc1+ #37
[ 41.304458] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1.fc35 04/01/2014
[ 41.306018] RIP: 0010:page_frag_free+0x79/0xe0
[ 41.306836] Code: 00 00 75 ea 48 8b 07 a9 00 00 01 00 74 e0 48 8b 47 48 48 8d 50 ff a8 01 48 0f 45 fa eb d0 48 c7 c6 18 b8 30 a6 e8 d7 f8 fc ff <0f> 0b 48 8d 78 ff eb bc 48 8b 07 a9 00 00 01 00 74 3a 66 90 0f b6
[ 41.310235] RSP: 0018:ffffac05c2a6bc78 EFLAGS: 00010292
[ 41.311201] RAX: 000000000000003e RBX: 0000000000000000 RCX: 0000000000000000
[ 41.312502] RDX: 0000000000000001 RSI: ffffffffa6423004 RDI: 00000000ffffffff
[ 41.313794] RBP: ffff993c98823600 R08: 0000000000000000 R09: 00000000ffffdfff
[ 41.315089] R10: ffffac05c2a6ba68 R11: ffffffffa698ca28 R12: ffff993c98823600
[ 41.316398] R13: ffff993c86311ebc R14: 0000000000000000 R15: 000000000000005c
[ 41.317700] FS: 00007fe13fc56740(0000) GS:ffff993cdd900000(0000) knlGS:0000000000000000
[ 41.319150] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 41.320152] CR2: 000000c00008a000 CR3: 0000000014908000 CR4: 0000000000350ee0
[ 41.321387] Call Trace:
[ 41.321819] <TASK>
[ 41.322193] skb_release_data+0x13f/0x1c0
[ 41.322902] __kfree_skb+0x20/0x30
[ 41.343870] tcp_recvmsg_locked+0x671/0x880
[ 41.363764] tcp_recvmsg+0x5e/0x1c0
[ 41.384102] inet_recvmsg+0x42/0x100
[ 41.406783] ? sock_recvmsg+0x1d/0x70
[ 41.428201] sock_read_iter+0x84/0xd0
[ 41.445592] ? 0xffffffffa3000000
[ 41.462442] new_sync_read+0x148/0x160
[ 41.479314] ? 0xffffffffa3000000
[ 41.496937] vfs_read+0x138/0x190
[ 41.517198] ksys_read+0x87/0xc0
[ 41.535336] do_syscall_64+0x3b/0x90
[ 41.551637] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 41.568050] RIP: 0033:0x48765b
[ 41.583955] Code: e8 4a 35 fe ff eb 88 cc cc cc cc cc cc cc cc e8 fb 7a fe ff 48 8b 7c 24 10 48 8b 74 24 18 48 8b 54 24 20 48 8b 44 24 08 0f 05 <48> 3d 01 f0 ff ff 76 20 48 c7 44 24 28 ff ff ff ff 48 c7 44 24 30
[ 41.632818] RSP: 002b:000000c000a2f5b8 EFLAGS: 00000212 ORIG_RAX: 0000000000000000
[ 41.664588] RAX: ffffffffffffffda RBX: 000000c000062000 RCX: 000000000048765b
[ 41.681205] RDX: 0000000000005e54 RSI: 000000c000e66000 RDI: 0000000000000016
[ 41.697164] RBP: 000000c000a2f608 R08: 0000000000000001 R09: 00000000000001b4
[ 41.713034] R10: 00000000000000b6 R11: 0000000000000212 R12: 00000000000000e9
[ 41.728755] R13: 0000000000000001 R14: 000000c000a92000 R15: ffffffffffffffff
[ 41.744254] </TASK>
[ 41.758585] Modules linked in: br_netfilter bridge veth netconsole virtio_net
and
[ 33.524802] BUG: Bad page state in process systemd-network pfn:11e60
[ 33.528617] page ffffe05dc0147b00 ffffe05dc04e7a00 ffff8ae9851ec000 (1) len 82 offset 252 metasize 4 hroom 0 hdr_len 12 data ffff8ae9851ec10c data_meta ffff8ae9851ec108 data_end ffff8ae9851ec14e
[ 33.529764] page:000000003792b5ba refcount:0 mapcount:-512 mapping:0000000000000000 index:0x0 pfn:0x11e60
[ 33.532463] flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
[ 33.532468] raw: 000fffffc0000000 0000000000000000 dead000000000122 0000000000000000
[ 33.532470] raw: 0000000000000000 0000000000000000 00000000fffffdff 0000000000000000
[ 33.532471] page dumped because: nonzero mapcount
[ 33.532472] Modules linked in: br_netfilter bridge veth netconsole virtio_net
[ 33.532479] CPU: 0 PID: 791 Comm: systemd-network Kdump: loaded Not tainted 5.18.0-rc1+ #37
[ 33.532482] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1.fc35 04/01/2014
[ 33.532484] Call Trace:
[ 33.532496] <TASK>
[ 33.532500] dump_stack_lvl+0x45/0x5a
[ 33.532506] bad_page.cold+0x63/0x94
[ 33.532510] free_pcp_prepare+0x290/0x420
[ 33.532515] free_unref_page+0x1b/0x100
[ 33.532518] skb_release_data+0x13f/0x1c0
[ 33.532524] kfree_skb_reason+0x3e/0xc0
[ 33.532527] ip6_mc_input+0x23c/0x2b0
[ 33.532531] ip6_sublist_rcv_finish+0x83/0x90
[ 33.532534] ip6_sublist_rcv+0x22b/0x2b0
[3] XDP program to reproduce(xdp_pass.c):
#include <linux/bpf.h>
#include <bpf/bpf_helpers.h>
SEC("xdp_pass")
int xdp_pkt_pass(struct xdp_md *ctx)
{
bpf_xdp_adjust_head(ctx, -(int)32);
return XDP_PASS;
}
char _license[] SEC("license") = "GPL";
compile: clang -O2 -g -Wall -target bpf -c xdp_pass.c -o xdp_pass.o
load on virtio_net: ip link set enp1s0 xdpdrv obj xdp_pass.o sec xdp_pass
CC: stable@vger.kernel.org
CC: Jason Wang <jasowang@redhat.com>
CC: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
CC: Daniel Borkmann <daniel@iogearbox.net>
CC: "Michael S. Tsirkin" <mst@redhat.com>
CC: virtualization@lists.linux-foundation.org
Fixes: 8fb7da9e99 ("virtio_net: get build_skb() buf by data ptr")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20220425103703.3067292-1-razor@blackwall.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The other port_hidden functions rely on the port_read/port_write
functions to access the hidden control port. These functions apply the
offset for port_base_addr where applicable. Update port_hidden_wait to
use the port_wait_bit so that port_base_addr offsets are accounted for
when waiting for the busy bit to change.
Without the offset the port_hidden_wait function would timeout on
devices that have a non-zero port_base_addr (e.g. MV88E6141), however
devices that have a zero port_base_addr would operate correctly (e.g.
MV88E6390).
Fixes: 609070133a ("net: dsa: mv88e6xxx: update code operating on hidden registers")
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220425070454.348584-1-nathan@nathanrossi.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Return back the error value that we get from phy_read_mmd().
Fixes: c84786fa8f ("net: phy: marvell10g: read copper results from CSSR1")
Signed-off-by: Baruch Siach <baruch.siach@siklu.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/f47cb031aeae873bb008ba35001607304a171a20.1650868058.git.baruch@tkos.co.il
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The hardware checksum offloading requires use of a transmit
status block inserted before the outgoing frame data, this was
updated in '9a9ba2a4aaaa ("net: bcmgenet: always enable status blocks")'
However, skb_tx_timestamp() assumes that it is passed a raw frame
and PTP parsing chokes on this status block.
Fix this by calling __skb_pull(), which hides the TSB before calling
skb_tx_timestamp(), so an outgoing PTP packet is parsed correctly.
As the data in the skb has already been set up for DMA, and the
dma_unmap_* calls use a separately stored address, there is no
no effective change in the data transmission.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220424165307.591145-1-jonathan.lemon@gmail.com
Fixes: d03825fba4 ("net: bcmgenet: add skb_tx_timestamp call")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The function mctp_unregister() reclaims the device's relevant resource
when a netcard detaches. However, a running routine may be unaware of
this and cause the use-after-free of the mdev->addrs object.
The race condition can be demonstrated below
cleanup thread another thread
|
unregister_netdev() | mctp_sendmsg()
... | ...
mctp_unregister() | rt = mctp_route_lookup()
... | mctl_local_output()
kfree(mdev->addrs) | ...
| saddr = rt->dev->addrs[0];
|
An attacker can adopt the (recent provided) mtcpserial driver with pty
to fake the device detaching and use the userfaultfd to increase the
race success chance (in mctp_sendmsg). The KASan report for such a POC
is shown below:
[ 86.051955] ==================================================================
[ 86.051955] BUG: KASAN: use-after-free in mctp_local_output+0x4e9/0xb7d
[ 86.051955] Read of size 1 at addr ffff888005f298c0 by task poc/295
[ 86.051955]
[ 86.051955] Call Trace:
[ 86.051955] <TASK>
[ 86.051955] dump_stack_lvl+0x33/0x42
[ 86.051955] print_report.cold.13+0xb2/0x6b3
[ 86.051955] ? preempt_schedule_irq+0x57/0x80
[ 86.051955] ? mctp_local_output+0x4e9/0xb7d
[ 86.051955] kasan_report+0xa5/0x120
[ 86.051955] ? mctp_local_output+0x4e9/0xb7d
[ 86.051955] mctp_local_output+0x4e9/0xb7d
[ 86.051955] ? mctp_dev_set_key+0x79/0x79
[ 86.051955] ? copyin+0x38/0x50
[ 86.051955] ? _copy_from_iter+0x1b6/0xf20
[ 86.051955] ? sysvec_apic_timer_interrupt+0x97/0xb0
[ 86.051955] ? asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 86.051955] ? mctp_local_output+0x1/0xb7d
[ 86.051955] mctp_sendmsg+0x64d/0xdb0
[ 86.051955] ? mctp_sk_close+0x20/0x20
[ 86.051955] ? __fget_light+0x2fd/0x4f0
[ 86.051955] ? mctp_sk_close+0x20/0x20
[ 86.051955] sock_sendmsg+0xdd/0x110
[ 86.051955] __sys_sendto+0x1cc/0x2a0
[ 86.051955] ? __ia32_sys_getpeername+0xa0/0xa0
[ 86.051955] ? new_sync_write+0x335/0x550
[ 86.051955] ? alloc_file+0x22f/0x500
[ 86.051955] ? __ip_do_redirect+0x820/0x1820
[ 86.051955] ? vfs_write+0x44d/0x7b0
[ 86.051955] ? vfs_write+0x44d/0x7b0
[ 86.051955] ? fput_many+0x15/0x120
[ 86.051955] ? ksys_write+0x155/0x1b0
[ 86.051955] ? __ia32_sys_read+0xa0/0xa0
[ 86.051955] __x64_sys_sendto+0xd8/0x1b0
[ 86.051955] ? exit_to_user_mode_prepare+0x2f/0x120
[ 86.051955] ? syscall_exit_to_user_mode+0x12/0x20
[ 86.051955] do_syscall_64+0x3a/0x80
[ 86.051955] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 86.051955] RIP: 0033:0x7f82118a56b3
[ 86.051955] RSP: 002b:00007ffdb154b110 EFLAGS: 00000293 ORIG_RAX: 000000000000002c
[ 86.051955] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f82118a56b3
[ 86.051955] RDX: 0000000000000010 RSI: 00007f8211cd4000 RDI: 0000000000000007
[ 86.051955] RBP: 00007ffdb154c1d0 R08: 00007ffdb154b164 R09: 000000000000000c
[ 86.051955] R10: 0000000000000000 R11: 0000000000000293 R12: 000055d779800db0
[ 86.051955] R13: 00007ffdb154c2b0 R14: 0000000000000000 R15: 0000000000000000
[ 86.051955] </TASK>
[ 86.051955]
[ 86.051955] Allocated by task 295:
[ 86.051955] kasan_save_stack+0x1c/0x40
[ 86.051955] __kasan_kmalloc+0x84/0xa0
[ 86.051955] mctp_rtm_newaddr+0x242/0x610
[ 86.051955] rtnetlink_rcv_msg+0x2fd/0x8b0
[ 86.051955] netlink_rcv_skb+0x11c/0x340
[ 86.051955] netlink_unicast+0x439/0x630
[ 86.051955] netlink_sendmsg+0x752/0xc00
[ 86.051955] sock_sendmsg+0xdd/0x110
[ 86.051955] __sys_sendto+0x1cc/0x2a0
[ 86.051955] __x64_sys_sendto+0xd8/0x1b0
[ 86.051955] do_syscall_64+0x3a/0x80
[ 86.051955] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 86.051955]
[ 86.051955] Freed by task 301:
[ 86.051955] kasan_save_stack+0x1c/0x40
[ 86.051955] kasan_set_track+0x21/0x30
[ 86.051955] kasan_set_free_info+0x20/0x30
[ 86.051955] __kasan_slab_free+0x104/0x170
[ 86.051955] kfree+0x8c/0x290
[ 86.051955] mctp_dev_notify+0x161/0x2c0
[ 86.051955] raw_notifier_call_chain+0x8b/0xc0
[ 86.051955] unregister_netdevice_many+0x299/0x1180
[ 86.051955] unregister_netdevice_queue+0x210/0x2f0
[ 86.051955] unregister_netdev+0x13/0x20
[ 86.051955] mctp_serial_close+0x6d/0xa0
[ 86.051955] tty_ldisc_kill+0x31/0xa0
[ 86.051955] tty_ldisc_hangup+0x24f/0x560
[ 86.051955] __tty_hangup.part.28+0x2ce/0x6b0
[ 86.051955] tty_release+0x327/0xc70
[ 86.051955] __fput+0x1df/0x8b0
[ 86.051955] task_work_run+0xca/0x150
[ 86.051955] exit_to_user_mode_prepare+0x114/0x120
[ 86.051955] syscall_exit_to_user_mode+0x12/0x20
[ 86.051955] do_syscall_64+0x46/0x80
[ 86.051955] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 86.051955]
[ 86.051955] The buggy address belongs to the object at ffff888005f298c0
[ 86.051955] which belongs to the cache kmalloc-8 of size 8
[ 86.051955] The buggy address is located 0 bytes inside of
[ 86.051955] 8-byte region [ffff888005f298c0, ffff888005f298c8)
[ 86.051955]
[ 86.051955] The buggy address belongs to the physical page:
[ 86.051955] flags: 0x100000000000200(slab|node=0|zone=1)
[ 86.051955] raw: 0100000000000200 dead000000000100 dead000000000122 ffff888005c42280
[ 86.051955] raw: 0000000000000000 0000000080660066 00000001ffffffff 0000000000000000
[ 86.051955] page dumped because: kasan: bad access detected
[ 86.051955]
[ 86.051955] Memory state around the buggy address:
[ 86.051955] ffff888005f29780: 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00
[ 86.051955] ffff888005f29800: fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc
[ 86.051955] >ffff888005f29880: fc fc fc fb fc fc fc fc fa fc fc fc fc fa fc fc
[ 86.051955] ^
[ 86.051955] ffff888005f29900: fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc
[ 86.051955] ffff888005f29980: fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc
[ 86.051955] ==================================================================
To this end, just like the commit e04480920d ("Bluetooth: defer
cleanup of resources in hci_unregister_dev()") this patch defers the
destructive kfree(mdev->addrs) in mctp_unregister to the mctp_dev_put,
where the refcount of mdev is zero and the entire device is reclaimed.
This prevents the use-after-free because the sendmsg thread holds the
reference of mdev in the mctp_route object.
Fixes: 583be982d9 (mctp: Add device handling and netlink interface)
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20220422114340.32346-1-linma@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
plane_state->uapi.crtc is not what we want to be looking at.
If bigjoiner is used hw.crtc is what tells us what crtc the plane
is supposedly using.
Not an actual problem on current hardware as the only FBC capable
pipe (A) can't be a bigjoiner slave and thus uapi.crtc==hw.crtc
always here. But when we get more FBC instances this will become
actually important.
Fixes: 2e6c99f886 ("drm/i915/fbc: Nuke lots of crap from intel_fbc_state_cache")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220413152852.7336-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
(cherry picked from commit 3e1faae339)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
It's noted that dcvs interrupts are not self-clearing, thus an interrupt
handler runs constantly, which leads to a severe regression in runtime.
To fix the problem an explicit write to clear interrupt register is
required, note that on OSM platforms the register may not be present.
Fixes: 275157b367 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Since version 5.13, the standard syscon bindings have been added
to all clps711x DT nodes, so we can now use the more general
syscon_regmap_lookup_by_phandle function to get the syscon pointer.
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Wen Gu says:
====================
net/smc: Two fixes for smc fallback
This patch set includes two fixes for smc fallback:
Patch 1/2 introduces some simple helpers to wrap the replacement
and restore of clcsock's callback functions. Make sure that only
the original callbacks will be saved and not overwritten.
Patch 2/2 fixes a syzbot reporting slab-out-of-bound issue where
smc_fback_error_report() accesses the already freed smc sock (see
https://lore.kernel.org/r/00000000000013ca8105d7ae3ada@google.com/).
The patch fixes it by resetting sk_user_data and restoring clcsock
callback functions timely in fallback situation.
But it should be noted that although patch 2/2 can fix the issue
of 'slab-out-of-bounds/use-after-free in smc_fback_error_report',
it can't pass the syzbot reproducer test. Because after applying
these two patches in upstream, syzbot reproducer triggered another
known issue like this:
==================================================================
BUG: KASAN: use-after-free in tcp_retransmit_timer+0x2ef3/0x3360 net/ipv4/tcp_timer.c:511
Read of size 8 at addr ffff888020328380 by task udevd/4158
CPU: 1 PID: 4158 Comm: udevd Not tainted 5.18.0-rc3-syzkaller-00074-gb05a5683eba6-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0xeb/0x467 mm/kasan/report.c:313
print_report mm/kasan/report.c:429 [inline]
kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491
tcp_retransmit_timer+0x2ef3/0x3360 net/ipv4/tcp_timer.c:511
tcp_write_timer_handler+0x5e6/0xbc0 net/ipv4/tcp_timer.c:622
tcp_write_timer+0xa2/0x2b0 net/ipv4/tcp_timer.c:642
call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421
expire_timers kernel/time/timer.c:1466 [inline]
__run_timers.part.0+0x679/0xa80 kernel/time/timer.c:1737
__run_timers kernel/time/timer.c:1715 [inline]
run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1750
__do_softirq+0x29b/0x9c2 kernel/softirq.c:558
invoke_softirq kernel/softirq.c:432 [inline]
__irq_exit_rcu+0x123/0x180 kernel/softirq.c:637
irq_exit_rcu+0x5/0x20 kernel/softirq.c:649
sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1097
</IRQ>
...
(detail report can be found in https://syzkaller.appspot.com/text?tag=CrashReport&x=15406b44f00000)
IMHO, the above issue is the same as this known one: https://syzkaller.appspot.com/bug?extid=694120e1002c117747ed,
and it doesn't seem to be related with SMC. The discussion about this known issue is ongoing and can be found in
https://lore.kernel.org/bpf/000000000000f75af905d3ba0716@google.com/T/.
And I added the temporary solution mentioned in the above discussion on
top of my two patches, the syzbot reproducer of 'slab-out-of-bounds/
use-after-free in smc_fback_error_report' no longer triggers any issue.
====================
Link: https://lore.kernel.org/r/1650614179-11529-1-git-send-email-guwen@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported a slab-out-of-bounds/use-after-free issue,
which was caused by accessing an already freed smc sock in
fallback-specific callback functions of clcsock.
This patch fixes the issue by restoring fallback-specific
callback functions to original ones and resetting clcsock
sk_user_data to NULL before freeing smc sock.
Meanwhile, this patch introduces sk_callback_lock to make
the access and assignment to sk_user_data mutually exclusive.
Reported-by: syzbot+b425899ed22c6943e00b@syzkaller.appspotmail.com
Fixes: 341adeec9a ("net/smc: Forward wakeup to smc socket waitqueue after fallback")
Link: https://lore.kernel.org/r/00000000000013ca8105d7ae3ada@google.com/
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both listen and fallback process will save the current clcsock
callback functions and establish new ones. But if both of them
happen, the saved callback functions will be overwritten.
So this patch introduces some helpers to ensure that only save
the original callback functions of clcsock.
Fixes: 341adeec9a ("net/smc: Forward wakeup to smc socket waitqueue after fallback")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This includes major bug fixes introduced in 5.18-rc1 and 5.17+.
- Remove obsolete whint_mode (5.18-rc1)
- Fix IO split issue caused by op_flags change in f2fs (5.18-rc1)
- Fix a wrong condition check to detect IO failure loop (5.18-rc1)
- Fix wrong data truncation during roll-forward (5.17+)
-----BEGIN PGP SIGNATURE-----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=nBQL
-----END PGP SIGNATURE-----
Merge tag 'f2fs-fix-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs fixes from Jaegeuk Kim:
"This includes major bug fixes introduced in 5.18-rc1 and 5.17+:
- Remove obsolete whint_mode (5.18-rc1)
- Fix IO split issue caused by op_flags change in f2fs (5.18-rc1)
- Fix a wrong condition check to detect IO failure loop (5.18-rc1)
- Fix wrong data truncation during roll-forward (5.17+)"
* tag 'f2fs-fix-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: should not truncate blocks during roll-forward recovery
f2fs: fix wrong condition check when failing metapage read
f2fs: keep io_flags to avoid IO split due to different op_flags in two fio holders
f2fs: remove obsolete whint_mode
I had this bug sitting for too long in my pile, it is time to fix it.
Thanks to Doug Porter for reminding me of it!
We had various attempts in the past, including commit
0cbe6a8f08 ("tcp: remove SOCK_QUEUE_SHRUNK"),
but the issue is that TCP stack currently only generates
EPOLLOUT from input path, when tp->snd_una has advanced
and skb(s) cleaned from rtx queue.
If a flow has a big RTT, and/or receives SACKs, it is possible
that the notsent part (tp->write_seq - tp->snd_nxt) reaches 0
and no more data can be sent until tp->snd_una finally advances.
What is needed is to also check if POLLOUT needs to be generated
whenever tp->snd_nxt is advanced, from output path.
This bug triggers more often after an idle period, as
we do not receive ACK for at least one RTT. tcp_notsent_lowat
could be a fraction of what CWND and pacing rate would allow to
send during this RTT.
In a followup patch, I will remove the bogus call
to tcp_chrono_stop(sk, TCP_CHRONO_SNDBUF_LIMITED)
from tcp_check_space(). Fact that we have decided to generate
an EPOLLOUT does not mean the application has immediately
refilled the transmit queue. This optimistic call
might have been the reason the bug seemed not too serious.
Tested:
200 ms rtt, 1% packet loss, 32 MB tcp_rmem[2] and tcp_wmem[2]
$ echo 500000 >/proc/sys/net/ipv4/tcp_notsent_lowat
$ cat bench_rr.sh
SUM=0
for i in {1..10}
do
V=`netperf -H remote_host -l30 -t TCP_RR -- -r 10000000,10000 -o LOCAL_BYTES_SENT | egrep -v "MIGRATED|Bytes"`
echo $V
SUM=$(($SUM + $V))
done
echo SUM=$SUM
Before patch:
$ bench_rr.sh
130000000
80000000
140000000
140000000
140000000
140000000
130000000
40000000
90000000
110000000
SUM=1140000000
After patch:
$ bench_rr.sh
430000000
590000000
530000000
450000000
450000000
350000000
450000000
490000000
480000000
460000000
SUM=4680000000 # This is 410 % of the value before patch.
Fixes: c9bee3b7fd ("tcp: TCP_NOTSENT_LOWAT socket option")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Doug Porter <dsp@fb.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA, through dsa_port_bridge_leave(), first notifies the port of the
fact that it left a bridge, then, if that bridge was VLAN-aware, it
notifies the port of the change in VLAN awareness state, towards
VLAN-unaware mode.
So ocelot_port_vlan_filtering() can be called when ocelot_port->bridge
is NULL, and this makes ocelot_add_vlan_unaware_pvid() create a struct
ocelot_bridge_vlan with a vid of 0 and an "untagged" setting of true on
that port.
In a way this structure correctly reflects the reality, but by design,
VID 0 (OCELOT_STANDALONE_PVID) was not meant to be kept in the bridge
VLAN list of the driver, but managed separately.
Having OCELOT_STANDALONE_PVID in ocelot->vlans makes us trip up on
several sanity checks that did not expect to have this VID there.
For example, after we leave a VLAN-aware bridge and we re-join it, we
can no longer program egress-tagged VLANs to hardware:
# ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up
# ip link set swp0 master br0
# ip link set swp0 nomaster
# ip link set swp0 master br0
# bridge vlan add dev swp0 vid 100
Error: mscc_ocelot_switch_lib: Port with more than one egress-untagged VLAN cannot have egress-tagged VLANs.
But this configuration is in fact supported by the hardware, since we
could use OCELOT_PORT_TAG_NATIVE. According to its comment:
/* all VLANs except the native VLAN and VID 0 are egress-tagged */
yet when assessing the eligibility for this mode, we do not check for
VID 0 in ocelot_port_uses_native_vlan(), instead we just ensure that
ocelot_port_num_untagged_vlans() == 1. This is simply because VID 0
doesn't have a bridge VLAN structure.
The way I identify the problem is that ocelot_port_vlan_filtering(false)
only means to call ocelot_add_vlan_unaware_pvid() when we dynamically
turn off VLAN awareness for a bridge we are under, and the PVID changes
from the bridge PVID to a reserved PVID based on the bridge number.
Since OCELOT_STANDALONE_PVID is statically added to the VLAN table
during ocelot_vlan_init() and never removed afterwards, calling
ocelot_add_vlan_unaware_pvid() for it is not intended and does not serve
any purpose.
Fix the issue by avoiding the call to ocelot_add_vlan_unaware_pvid(vid=0)
when we're resetting VLAN awareness after leaving the bridge, to become
a standalone port.
Fixes: 54c3198460 ("net: mscc: ocelot: enforce FDB isolation when VLAN-unaware")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds