Quoting Paul [1]:
"Given that a quick (and perhaps error-prone) search of the uses
of rcu_assign_pointer() in v5.1 didn't find a single use of the
return value, let's please instead change the documentation and
implementation to eliminate the return value."
[1] https://lkml.kernel.org/r/20190523135013.GL28207@linux.ibm.com
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: rcu@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
A positive value of rcupdate.rcu_task_stall_timeout is an interval
in seconds rather than jiffies.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Document similar real world examples in the kernel corresponding to the
second and third code snippets. Also correct an issue in
release_referenced() in the code snippet example.
Cc: oleg@redhat.com
Cc: jannh@google.com
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
[ paulmck: Do a bit of wordsmithing. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
A diagram in whatisRCU.txt has space character before tabs. This commit
therefore makes this diagram consistent with elsewhere in the document:
Use one leading tab, followed by spaces for any additional whitespace
required.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Now that synchronize_rcu_bh, synchronize_rcu_bh_expedited, call_rcu_bh,
rcu_barrier_bh, synchronize_sched, synchronize_sched_expedited,
call_rcu_sched, rcu_barrier_sched, get_state_synchronize_sched,
and cond_synchronize_sched are obsolete, let's remove them from the
documentation aside from a small historical section.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
and more translations. There's also some LICENSES adjustments from
Thomas.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAlyBl54PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YxoYH/3OcInUSk17Cb+wNpnJX66dXyVvzZcuAh5aU
HW5YWIIlp60jwsM0z+sVqNR51tfC+eMjw2HOWj0hOEUju7UGm7aDtB+WkEeJ7GUk
e/FX+GXD/OygQtpwXRQraWU/RO3RPSB9JKodF5tQ6aihOzsQGB9c11I0/f3Qp7+U
vaLBOdAlpQYemlzLKbskRZ2YpokELfpgwSb6O7mpI9i3mJeZA/lpyYSmHQxqwvG7
sqrmm7vHB7b0tZGqQISQaZNdUmSSD1lRfOX3brFw2DOIj2V2M1+O/8smBtRuAGf5
B03C7LjkNFn55tn1OHYlWEv8RpG5kH3VNc896jiWPDOXNpMSgl8=
=bOsl
-----END PGP SIGNATURE-----
Merge tag 'docs-5.1' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A fairly routine cycle for docs - lots of typo fixes, some new
documents, and more translations. There's also some LICENSES
adjustments from Thomas"
* tag 'docs-5.1' of git://git.lwn.net/linux: (74 commits)
docs: Bring some order to filesystem documentation
Documentation/locking/lockdep: Drop last two chars of sample states
doc: rcu: Suspicious RCU usage is a warning
docs: driver-api: iio: fix errors in documentation
Documentation/process/howto: Update for 4.x -> 5.x versioning
docs: Explicitly state that the 'Fixes:' tag shouldn't split lines
doc: security: Add kern-doc for lsm_hooks.h
doc: sctp: Merge and clean up rst files
Docs: Correct /proc/stat path
scripts/spdxcheck.py: fix C++ comment style detection
doc: fix typos in license-rules.rst
Documentation: fix admin-guide/README.rst minimum gcc version requirement
doc: process: complete removal of info about -git patches
doc: translations: sync translations 'remove info about -git patches'
perf-security: wrap paragraphs on 72 columns
perf-security: elaborate on perf_events/Perf privileged users
perf-security: document collected perf_events/Perf data categories
perf-security: document perf_events/Perf resource control
sysfs.txt: add note on available attribute macros
docs: kernel-doc: typo "if ... if" -> "if ... is"
...
Since the removal of FS_RECLAIM annotations, lockdep states contain four
characters, not six.
Fixes: e5684bbfc3 ("Documentation/locking/lockdep: Update info about states")
Fixes: d92a8cfcb3 ("locking/lockdep: Rework FS_RECLAIM annotation")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Suspicious RCU usage messages are reported as warnings.
Fixes: a5dd63efda ("lockdep: Use "WARNING" tag on lockdep splats")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The supported module parameters are detailed in both RCU/torture.txt and
admin-guide/kernel-parameters.txt, and the latter is actively maintained.
So this patch removes section MODULE PARAMETERS in torture.txt and
adds a reference to the information in kernel-parameters.txt.
Signed-off-by: Junchang Wang <junchangwang@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
[ paulmck: Add search string. ]
Although the name rcu_process_callbacks() still makes sense for Tiny
RCU, where most of what it does is invoke callbacks, it no longer makes
much sense for Tree RCU, especially given that the actually callback
invocation is relegated to rcu_do_batch(), or, for no-CBs CPUs, to the
rcuo kthreads. Especially in the latter case, rcu_process_callbacks()
has very little to do with actual callbacks. A better description of
this function is that it performs RCU's core processing.
This commit therefore changes the name of Tree RCU's rcu_process_callbacks()
function to rcu_core(), which also has the virtue of being consistent with
the existing invoke_rcu_core() function.
While in the area, the header comment is reworked.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The name rcu_check_callbacks() arguably made sense back in the early
2000s when RCU was quite a bit simpler than it is today, but it has
become quite misleading, especially with the advent of dyntick-idle
and NO_HZ_FULL. The rcu_check_callbacks() function is RCU's hook into
the scheduling-clock interrupt, and is now but one of many ways that
callbacks get promoted to invocable state.
This commit therefore changes the name to rcu_sched_clock_irq(),
which is the same number of characters and clearly indicates this
function's relation to the rest of the Linux kernel. In addition, for
the sake of consistency, rcu_flavor_check_callbacks() is also renamed
to rcu_flavor_sched_clock_irq().
While in the area, the header comments for both functions are reworked.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
SRCU's synchronize_srcu() may not be invoked from CPU-hotplug notifiers,
due to the fact that SRCU grace periods make use of timers and the
possibility of timers being temporarily stranded on the outgoing CPU.
This stranding of timers means that timers posted to the outgoing CPU
will not fire until late in the CPU-hotplug process. The problem is
that if a notifier is waiting on an SRCU grace period, that grace period
is waiting on a timer, and that timer is stranded on the outgoing CPU,
then the notifier will never be awakened, in other words, deadlock has
occurred. This same situation of course also prohibits srcu_barrier()
from being invoked from CPU-hotplug notifiers.
This commit therefore updates the requirements to include this restriction.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Back when there were multiple flavors of RCU, it was necessary to
separately count lazy and non-lazy callbacks for each CPU. These counts
were used in CONFIG_RCU_FAST_NO_HZ kernels to determine how long a newly
idle CPU should be allowed to sleep before handling its RCU callbacks.
But now that there is only one flavor, the callback counts for a given
CPU's sole rcu_data structure are the counts for that CPU.
This commit therefore removes the rcu_data structure's ->nonlazy_posted
and ->nonlazy_posted_snap fields, the rcu_idle_count_callbacks_posted()
and rcu_cpu_has_callbacks() functions, repurposes the rcu_data structure's
->all_lazy field to record the laziness state at the beginning of the
latest idle sojourn, and modifies CONFIG_RCU_FAST_NO_HZ RCU CPU stall
warnings accordingly.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Back when there could be multiple RCU flavors running in the same kernel
at the same time, it was necessary to specify the expedited grace-period
IPI handler at runtime. Now that there is only one RCU flavor, the
IPI handler can be determined at build time. There is therefore no
longer any reason for the RCU-preempt and RCU-sched IPI handlers to
have different names, nor is there any reason to pass these handlers in
function arguments and in the data structures enclosing workqueues.
This commit therefore makes all these changes, pushing the specification
of the expedited grace-period IPI handler down to the point of use.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit replaces "struction" with the correct "structure".
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The stallwarn document incorrectly mentions 'fps=' instead of 'fqs='.
This commit orrects that.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Given RCU flavor consolidation, when rcu_read_unlock() is invoked with
interrupts disabled, the reporting of the corresponding quiescent state is
deferred until interrupts are re-enabled. There was therefore some hope
that this would allow dropping the restriction against holding scheduler
spinlocks across an rcu_read_unlock() without disabling interrupts across
the entire corresponding RCU read-side critical section. Unfortunately,
the need to quickly provide a quiescent state to expedited grace periods
sometimes requires a call to raise_softirq() during rcu_read_unlock()
execution. Because raise_softirq() can sometimes acquire the scheduler
spinlocks, the restriction must remain in effect. This commit therefore
updates the RCU requirements documentation accordingly.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The code listing under this section has a quick quiz that says line
19 uses rcu_access_pointer, but the code listing itself instead uses
rcu_dereference(). This commit therefore makes the code listing match
the quick quiz.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The Requirements.html document says "Disabling Preemption Does
Not Block Grace Periods". However this is no longer true with
the RCU consolidation. This commit therefore removes the obsolete
(non-)requirement entirely.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The whatisRCU.txt document says rcu_dereference() cannot be used
outside of rcu_read_lock() protected sections. The commit adds a
mention of rcu_dereference_protected(), so that the new reader knows
that this API can be used to avoid update-side use of rcu_read_lock()
and rcu_read_unlock().
Cc: tytso@mit.edu
Suggested-by: tytso@mit.edu
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
[ paulmck: Update wording, including further feedback from Joel. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The checklist suggests rcu_barrier_bh() for RCU-bh and similarly for
sched, however these APIs are now implemented as rcu_barrier() itself due
to the RCU consolidation. This commit therefore corrects checklist.txt
to encourage use of the underlying rcu_barrier() API.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Since the RCU mechanisms have been consolidated, the checklist item
warning that synchronize_rcu() waits only for RCU readers is obsolete.
This commit therefore removes this checklist item.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
call_rcu_bh is now implemented in terms of call_rcu, so the suggestion
to use a different API for speed benefits is not accurate anymore.
This commit updates the document accordingly.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit explains why rcu_read_lock_sched is better than using
preempt_disable.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
RCU consolidation effort causes the update side of the RCU API to
be consistent across all the 3 RCU flavors (normal, sched, bh). This
commit therefore updates the full API in the whatisRCU document, thus
encouraging people to use the consolidated RCU update API instead of
the old RCU-bh and RCU-sched update APIs.
Also rcu_dereference is documented to be the same for all 3 mechanisms
(even before the consolidation), however its actually different - as
using the right rcu_dereference primitive (such as rcu_dereference_bh
for bh) is needed to make lock debugging work correctly. This update
also corrects that.
Also, add local_bh_disable() and local_bh_enable() as softirq
protection primitives and correct a grammar error in a quiz answer.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The rcu_state structure doesn't have a gp_seq_needed field. Update the
description under rcu_data accordingly, to reflect this.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: <kernel-team@android.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
An important note under the rcu_segcblist description could use a more
detailed description. Especially explanation of the scenario where the
->head field may be temporarily NULL making it not wise to rely on it
to determine if callbacks are associated with the rcu_segcblist.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: <kernel-team@android.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This patch updates all Data-Structures document figures and text and
removes some unwanted figures, to reflect the recent work Paul has been
doing with consolidating all flavors of RCU.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: <kernel-team@android.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
rcu_dynticks was folded into rcu_data structure. Update the data
structures RCU document accordingly.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: <kernel-team@android.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Since commit fced9c8cfe ("rcu: Avoid resched_cpu() when rescheduling
the current CPU"), resched_cpu is not directly called from
sync_sched_exp_handler. Update the documentation about the same.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: <kernel-team@android.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Consolidation of RCU-bh, RCU-preempt, and RCU-sched into one RCU flavor
to rule them all resulted in the removal of rcu_preempt_state. However,
stallwarn.txt still mentions rcu_preempt_state. This commit therefore
Updates stallwarn documentation accordingly.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: <kernel-team@android.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
RCU Data-Structures document describes a trick to test RCU with small
number of CPUs but with a taller tree. It wasn't immediately clear how
the document arrived at 16 CPUs which also requires setting the
FANOUT_LEAF to 2 instead of the default of 16. This commit therefore
provides the needed clarification.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: <kernel-team@android.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit adds a section to the requirements documentation setting down
requirements for grace-period and callback-invocation forward progress.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
readability improvements for the formatted output, some LICENSES updates
including the addition of the ISC license, the removal of the unloved and
unmaintained 00-INDEX files, the deprecated APIs document from Kees, more
MM docs from Mike Rapoport, and the usual pile of typo fixes and
corrections.
-----BEGIN PGP SIGNATURE-----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=C0wt
-----END PGP SIGNATURE-----
Merge tag 'docs-4.20' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"This is a fairly typical cycle for documentation. There's some welcome
readability improvements for the formatted output, some LICENSES
updates including the addition of the ISC license, the removal of the
unloved and unmaintained 00-INDEX files, the deprecated APIs document
from Kees, more MM docs from Mike Rapoport, and the usual pile of typo
fixes and corrections"
* tag 'docs-4.20' of git://git.lwn.net/linux: (41 commits)
docs: Fix typos in histogram.rst
docs: Introduce deprecated APIs list
kernel-doc: fix declaration type determination
doc: fix a typo in adding-syscalls.rst
docs/admin-guide: memory-hotplug: remove table of contents
doc: printk-formats: Remove bogus kobject references for device nodes
Documentation: preempt-locking: Use better example
dm flakey: Document "error_writes" feature
docs/completion.txt: Fix a couple of punctuation nits
LICENSES: Add ISC license text
LICENSES: Add note to CDDL-1.0 license that it should not be used
docs/core-api: memory-hotplug: add some details about locking internals
docs/core-api: rename memory-hotplug-notifier to memory-hotplug
docs: improve readability for people with poorer eyesight
yama: clarify ptrace_scope=2 in Yama documentation
docs/vm: split memory hotplug notifier description to Documentation/core-api
docs: move memory hotplug description into admin-guide/mm
doc: Fix acronym "FEKEK" in ecryptfs
docs: fix some broken documentation references
iommu: Fix passthrough option documentation
...
This is a respin with a wider audience (all that get_maintainer returned)
and I know this spams a *lot* of people. Not sure what would be the correct
way, so my apologies for ruining your inbox.
The 00-INDEX files are supposed to give a summary of all files present
in a directory, but these files are horribly out of date and their
usefulness is brought into question. Often a simple "ls" would reveal
the same information as the filenames are generally quite descriptive as
a short introduction to what the file covers (it should not surprise
anyone what Documentation/sched/sched-design-CFS.txt covers)
A few years back it was mentioned that these files were no longer really
needed, and they have since then grown further out of date, so perhaps
it is time to just throw them out.
A short status yields the following _outdated_ 00-INDEX files, first
counter is files listed in 00-INDEX but missing in the directory, last
is files present but not listed in 00-INDEX.
List of outdated 00-INDEX:
Documentation: (4/10)
Documentation/sysctl: (0/1)
Documentation/timers: (1/0)
Documentation/blockdev: (3/1)
Documentation/w1/slaves: (0/1)
Documentation/locking: (0/1)
Documentation/devicetree: (0/5)
Documentation/power: (1/1)
Documentation/powerpc: (0/5)
Documentation/arm: (1/0)
Documentation/x86: (0/9)
Documentation/x86/x86_64: (1/1)
Documentation/scsi: (4/4)
Documentation/filesystems: (2/9)
Documentation/filesystems/nfs: (0/2)
Documentation/cgroup-v1: (0/2)
Documentation/kbuild: (0/4)
Documentation/spi: (1/0)
Documentation/virtual/kvm: (1/0)
Documentation/scheduler: (0/2)
Documentation/fb: (0/1)
Documentation/block: (0/1)
Documentation/networking: (6/37)
Documentation/vm: (1/3)
Then there are 364 subdirectories in Documentation/ with several files that
are missing 00-INDEX alltogether (and another 120 with a single file and no
00-INDEX).
I don't really have an opinion to whether or not we /should/ have 00-INDEX,
but the above 00-INDEX should either be removed or be kept up to date. If
we should keep the files, I can try to keep them updated, but I rather not
if we just want to delete them anyway.
As a starting point, remove all index-files and references to 00-INDEX and
see where the discussion is going.
Signed-off-by: Henrik Austad <henrik@austad.us>
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Just-do-it-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: [Almost everybody else]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This commit defers reporting of RCU-preempt quiescent states at
rcu_read_unlock_special() time when any of interrupts, softirq, or
preemption are disabled. These deferred quiescent states are reported
at a later RCU_SOFTIRQ, context switch, idle entry, or CPU-hotplug
offline operation. Of course, if another RCU read-side critical
section has started in the meantime, the reporting of the quiescent
state will be further deferred.
This also means that disabling preemption, interrupts, and/or
softirqs will act as an RCU-preempt read-side critical section.
This is enforced by checking preempt_count() as needed.
Some special cases must be handled on an ad-hoc basis, for example,
context switch is a quiescent state even though both the scheduler and
do_exit() disable preemption. In these cases, additional calls to
rcu_preempt_deferred_qs() override the preemption disabling. Similar
logic overrides disabled interrupts in rcu_preempt_check_callbacks()
because in this case the quiescent state happened just before the
corresponding scheduling-clock interrupt.
In theory, this change lifts a long-standing restriction that required
that if interrupts were disabled across a call to rcu_read_unlock()
that the matching rcu_read_lock() also be contained within that
interrupts-disabled region of code. Because the reporting of the
corresponding RCU-preempt quiescent state is now deferred until
after interrupts have been enabled, it is no longer possible for this
situation to result in deadlocks involving the scheduler's runqueue and
priority-inheritance locks. This may allow some code simplification that
might reduce interrupt latency a bit. Unfortunately, in practice this
would also defer deboosting a low-priority task that had been subjected
to RCU priority boosting, so real-time-response considerations might
well force this restriction to remain in place.
Because RCU-preempt grace periods are now blocked not only by RCU
read-side critical sections, but also by disabling of interrupts,
preemption, and softirqs, it will be possible to eliminate RCU-bh and
RCU-sched in favor of RCU-preempt in CONFIG_PREEMPT=y kernels. This may
require some additional plumbing to provide the network denial-of-service
guarantees that have been traditionally provided by RCU-bh. Once these
are in place, CONFIG_PREEMPT=n kernels will be able to fold RCU-bh
into RCU-sched. This would mean that all kernels would have but
one flavor of RCU, which would open the door to significant code
cleanup.
Moving to a single flavor of RCU would also have the beneficial effect
of reducing the NOCB kthreads by at least a factor of two.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Apply rcu_read_unlock_special() preempt_count() feedback
from Joel Fernandes. ]
[ paulmck: Adjust rcu_eqs_enter() call to rcu_preempt_deferred_qs() in
response to bug reports from kbuild test robot. ]
[ paulmck: Fix bug located by kbuild test robot involving recursion
via rcu_preempt_deferred_qs(). ]
The RCU-bh update API is now defined in terms of that of RCU-bh and
RCU-sched, so this commit updates the documentation accordingly.
In addition, although RCU-sched persists in !PREEMPT kernels, in
the PREEMPT case its update API is now defined in terms of that of
RCU-preempt, so this commit also updates the documentation accordingly.
While in the area, this commit removes the documentation for the
now-obsolete synchronize_rcu_mult() and clarifies the Tasks RCU
documentation.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The very useful RCU Data-Structures describes that the dynticks counter
of the rcu_dynticks data structure is incremented when we transitions to
or from dynticks-idle mode. However it doesn't mention that it is also
incremented due to transitions to and from user mode which for dynticks
purposes is an extended quiescent state.
I found this with tracing calls to rcu_dynticks_eqs_enter which can also
happen from rcu_user_enter. Lets add this information to the
Data-Structures document.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Two of the Requirements.html LKML links are broken. This patch changes
them to use the archive from lore.kernel.org, which works fine.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Make Requirements.html talk about how NMI handlers can take what appear
to RCU to be normal interrupts.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Unfortunately the patch for adding list_for_each_entry_from_rcu()
wasn't the final patch after all review. It is functionally
correct but the documentation was incomplete.
This patch adds this missing documentation which includes an update to
the documentation for list_for_each_entry_continue_rcu() to match the
documentation for the new list_for_each_entry_from_rcu(), and adds
list_for_each_entry_from_rcu() and the already existing
hlist_for_each_entry_from_rcu() to section 7 of whatisRCU.txt.
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The synchronize_rcu() definition based on RW-locks in whatisRCU.txt
does not meet the "Memory-Barrier Guarantees" in Requirements.html;
for example, the following SB-like test:
P0: P1:
WRITE_ONCE(x, 1); WRITE_ONCE(y, 1);
synchronize_rcu(); smp_mb();
r0 = READ_ONCE(y); r1 = READ_ONCE(x);
should not be allowed to reach the state "r0 = 0 AND r1 = 0", but
the current write_lock()+write_unlock() definition can not ensure
this. This commit therefore inserts an smp_mb__after_spinlock()
in order to cause this synchronize_rcu() implementation to provide
this memory-barrier guarantee.
Suggested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
It came to my attention that the file "whatisRCU.txt" does not
manage to actually ever spell out what is RCU.
This might not be an issue for a lot of people, but we have to
assume the consumers of these documents are starting from ground
zero; otherwise they'd not be reading the docs.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
This commit keeps only the historical and low-level discussion of
smp_read_barrier_depends().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Adjusted to allow for David Howells feedback on prior commit. ]
Now that cond_resched() also provides RCU quiescent states when
needed, it can be used in place of cond_resched_rcu_qs(). This
commit therefore documents this change.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Pull RCU updates from Ingo Molnar:
"The main changes in this cycle are:
- Documentation updates
- RCU CPU stall-warning updates
- Torture-test updates
- Miscellaneous fixes
Size wise the biggest updates are to documentation. Excluding
documentation most of the code increase comes from a single commit
which expands debugging"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
srcu: Add parameters to SRCU docbook comments
doc: Rewrite confusing statement about memory barriers
memory-barriers.txt: Fix typo in pairing example
rcu/segcblist: Include rcupdate.h
rcu: Add extended-quiescent-state testing advice
rcu: Suppress lockdep false-positive ->boost_mtx complaints
rcu: Do not include rtmutex_common.h unconditionally
torture: Provide TMPDIR environment variable to specify tmpdir
rcutorture: Dump writer stack if stalled
rcutorture: Add interrupt-disable capability to stall-warning tests
rcu: Suppress RCU CPU stall warnings while dumping trace
rcu: Turn off tracing before dumping trace
rcu: Make RCU CPU stall warnings check for irq-disabled CPUs
sched,rcu: Make cond_resched() provide RCU quiescent state
sched: Make resched_cpu() unconditional
irq_work: Map irq_work_on_queue() to irq_work_on() in !SMP
rcu: Create call_rcu_tasks() kthread at boot time
rcu: Fix up pending cbs check in rcu_prepare_for_idle
memory-barriers: Rework multicopy-atomicity section
memory-barriers: Replace uses of "transitive"
...
The RCU CPU stall warnings have morphed significantly since the last
update, so this commit brings the documentation up to date.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If a fast system has a worst-case grace-period duration of (say) ten
seconds, then running the same workload on a system ten times as slow
will get you an RCU CPU stall warning given default stall-warning
timeout settings. This commit therefore adds this possibility to
stallwarn.txt.
Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If a periodic interrupt's handler takes longer to execute than the period
between successive interrupts, RCU's kthreads and softirq handlers can
be prevented from executing, resulting in otherwise inexplicable RCU
CPU stall warnings. This commit therefore calls out this possibility
in Documentation/RCU/stallwarn.txt.
Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit provides text and diagrams showing how Tree RCU implements
its grace-period memory ordering guarantees.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
This commit documents the situations in which RCU needs the
scheduling-clock interrupt to be enabled, along with the consequences
of failing to meet RCU's needs in this area.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There are too many ways for the compiler to optimize (that is, break)
dependencies carried via integer values, so it is now permissible to
carry dependencies only via pointers. This commit catches up some of
the documentation on this point.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
RCU's debugfs tracing used to be the only reasonable low-level debug
information available, but ftrace and event tracing has since surpassed
the RCU debugfs level of usefulness. This commit therefore removes
RCU's debugfs tracing.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The sparse-based checking for non-RCU accesses to RCU-protected pointers
has been around for a very long time, and it is now the only type of
sparse-based checking that is optional. This commit therefore makes
it unconditional.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
The NO_HZ_FULL_SYSIDLE full-system-idle capability was added in 2013
by commit 0edd1b1784 ("nohz_full: Add full-system-idle state machine"),
but has not been used. This commit therefore removes it.
If it turns out to be needed later, this commit can always be reverted.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit classifies tail recursion as an alternative way to write
a loop, with similar limitations.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit documents the auto-expediting requirement satisfied by
commits 2da4b2a7fd ("srcu: Expedite first synchronize_srcu() when idle")
and 22607d66bb ("srcu: Specify auto-expedite holdoff time").
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
A group of Linux kernel hackers reported chasing a bug that resulted
from their assumption that SLAB_DESTROY_BY_RCU provided an existence
guarantee, that is, that no block from such a slab would be reallocated
during an RCU read-side critical section. Of course, that is not the
case. Instead, SLAB_DESTROY_BY_RCU only prevents freeing of an entire
slab of blocks.
However, there is a phrase for this, namely "type safety". This commit
therefore renames SLAB_DESTROY_BY_RCU to SLAB_TYPESAFE_BY_RCU in order
to avoid future instances of this sort of confusion.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <linux-mm@kvack.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
[ paulmck: Add comments mentioning the old name, as requested by Eric
Dumazet, in order to help people familiar with the old name find
the new one. ]
Acked-by: David Rientjes <rientjes@google.com>
The rcu_all_qs() and rcu_note_context_switch() do a series of checks,
taking various actions to supply RCU with quiescent states, depending
on the outcomes of the various checks. This is a bit much for scheduling
fastpaths, so this commit creates a separate ->rcu_urgent_qs field in
the rcu_dynticks structure that acts as a global guard for these checks.
Thus, in the common case, rcu_all_qs() and rcu_note_context_switch()
check the ->rcu_urgent_qs field, find it false, and simply return.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
The rcu_momentary_dyntick_idle() function scans the RCU flavors, checking
that one of them still needs a quiescent state before doing an expensive
atomic operation on the ->dynticks counter. However, this check reduces
overhead only after a rare race condition, and increases complexity. This
commit therefore removes the scan and the mechanism enabling the scan.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_qs_ctr variable is yet another isolated per-CPU variable,
so this commit pulls it into the pre-existing rcu_dynticks per-CPU
structure.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_sched_qs_mask variable is yet another isolated per-CPU variable,
so this commit pulls it into the pre-existing rcu_dynticks per-CPU
structure.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
When an RCU-protected pointer is fetched but never dereferenced
rcu_access_pointer() should be used in place of rcu_dereference().
This commit explicitly records this very fact in Documentation/
RCU/rcu_dereference.txt, in order to prevent the usage of
rcu_dereference() in comparisons.
Signed-off-by: Michalis Kokologiannakis <mixaskok@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_assign_pointer() macro has changed over time, and the version
in Documentation/RCU/whatisRCU.txt has not kept up. This commit brings
it into 2017, albeit in a simplified fashion.
Reported-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
These changes include lighter-weight expedited grace periods, the fact
that expedited grace periods and rcu_barrier() no longer block CPU
hotplug, some HTML font fixups, noting that rcu_barrier() need not wait
for a grace period (even if callbacks are posted), the fact that SRCU
read-side critical sections can be used from offline CPUs, and the fact
that SRCU now maintains per-CPU callback lists.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_segcblist data structure, which contains segmented lists
of RCU callbacks, was recently added. This commit updates the
documentation accordingly.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit rearranges the Documentation/RCU/stallwarn.txt file to
put the list of issues that can cause RCU CPU stall warnings near
the beginning of the document.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a description of how expedited grace periods operate
during the mid-boot "dead zone", which starts when the scheduler spawns
the first kthread and ends when all of RCU's kthreads have been spawned.
In short, before mid-boot, synchronous grace periods can be a no-op.
After the end of mid-boot, workqueues may be used. During mid-boot,
the requesting task drivees the expedited grace period.
For more detail, see https://lwn.net/Articles/716148/.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit updates the "Early Boot" section of the RCU requirements
to describe how synchronous RCU grace periods are now legal throughout
the boot process.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Expedited grace periods no longer fall back to normal grace periods
in response to lock contention, given that expedited grace periods
now use the rcu_node tree so as to avoid contention. This commit
therfore removes the expedited_normal counter.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Now that quick-quiz answers are inline, there is no separate section
containing those answers. This commit therefore removes the dangling
reference from the RCU data-structures design documentation.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit adds design documentation for expedited grace periods.
This documentation is in HTML rather than the new documentation
format because (1) I have prototype documentation already in HTML,
and (2) Attempting to learn the new documentation format while
creating the design documentation seems likely to result in neither
happening in a timely fashion.
Once the design documentation is complete, we can start a conversion effort.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
deference should actually be dereference.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Recent memory-model work deduces the relationships of RCU read-side
critical sections and grace periods based on the relationships of
accesses within a critical section and accesses preceding and following
the grace period. This commit therefore adds this viewpoint.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
A good practice is to prefix the names of functions by the name
of the subsystem.
The kthread worker API is a mix of classic kthreads and workqueues. Each
worker has a dedicated kthread. It runs a generic function that process
queued works. It is implemented as part of the kthread subsystem.
This patch renames the existing kthread worker API to use
the corresponding name from the workqueues API prefixed by
kthread_:
__init_kthread_worker() -> __kthread_init_worker()
init_kthread_worker() -> kthread_init_worker()
init_kthread_work() -> kthread_init_work()
insert_kthread_work() -> kthread_insert_work()
queue_kthread_work() -> kthread_queue_work()
flush_kthread_work() -> kthread_flush_work()
flush_kthread_worker() -> kthread_flush_worker()
Note that the names of DEFINE_KTHREAD_WORK*() macros stay
as they are. It is common that the "DEFINE_" prefix has
precedence over the subsystem names.
Note that INIT() macros and init() functions use different
naming scheme. There is no good solution. There are several
reasons for this solution:
+ "init" in the function names stands for the verb "initialize"
aka "initialize worker". While "INIT" in the macro names
stands for the noun "INITIALIZER" aka "worker initializer".
+ INIT() macros are used only in DEFINE() macros
+ init() functions are used close to the other kthread()
functions. It looks much better if all the functions
use the same scheme.
+ There will be also kthread_destroy_worker() that will
be used close to kthread_cancel_work(). It is related
to the init() function. Again it looks better if all
functions use the same naming scheme.
+ there are several precedents for such init() function
names, e.g. amd_iommu_init_device(), free_area_init_node(),
jump_label_init_type(), regmap_init_mmio_clk(),
+ It is not an argument but it was inconsistent even before.
[arnd@arndb.de: fix linux-next merge conflict]
Link: http://lkml.kernel.org/r/20160908135724.1311726-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/1470754545-17632-3-git-send-email-pmladek@suse.com
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is an assertion in __call_rcu() that checks only the bottom
bit of the rcu_head pointer, rather than the bottom two (as might be
expected for 32-bit systems) or the bottom three (as might be expected
for 64-bit systems). This choice might be a bit surprising in these days
of ubiquitous 32-bit and 64-bit systems. This commit therefore records
the reason for this odd alignment check, namely that m68k guarantees
only two-byte alignment despite being a 32-bit architectures.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
CONFIG_RCU_TORTURE_TEST_RUNNABLE was removed by commit 4e9a073f60
("torture: Remove CONFIG_RCU_TORTURE_TEST_RUNNABLE, simplify code"),
but the documentation was not updated accordingly. This commit therefore
updates the documentation to reflect CONFIG_RCU_TORTURE_TEST_RUNNABLE's
removal and to add a description for the alternative module parameter.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Jiunn Chang