Commit Graph

545 Commits

Author SHA1 Message Date
Theodore Ts'o 01436ef2e4 ext4: Remove unused mount options: nomballoc, mballoc, nocheck
These mount options don't actually do anything any more, so remove
them.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-17 07:22:35 -04:00
Manish Katiyar 0b09923eab ext4: Remove compile warnings when building w/o CONFIG_PROC_FS
Signed-off-by: Manish Katiyar <mkatiyar@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-17 14:58:45 -04:00
Eric Sesterhenn 5128273a32 ext4: Add missing newlines to printk messages
There are some newlines missing in ext4_check_descriptors, which
cause the printk level to be printed out when the next printk call
is made:

[  778.847265] EXT4-fs: ext4_check_descriptors: Block bitmap for group 0
not in group (block 1509949442)!<3>EXT4-fs: group descriptors corrupted!
[  802.646630] EXT4-fs: ext4_check_descriptors: Inode bitmap for group 0
not in group (block 9043971)!<3>EXT4-fs: group descriptors corrupted!

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-17 09:16:19 -04:00
Aneesh Kumar K.V 22208dedbd ext4: Fix file fragmentation during large file write.
The range_cyclic writeback mode uses the address_space writeback_index
as the start index for writeback.  With delayed allocation we were
updating writeback_index wrongly resulting in highly fragmented file.
This patch reduces the number of extents reduced from 4000 to 27 for a
3GB file.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-10-16 10:10:36 -04:00
Aneesh Kumar K.V af6f029d38 ext4: Use tag dirty lookup during mpage_da_submit_io
This enables us to drop the range_cont writeback mode
use from ext4_da_writepages.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-10-14 09:20:19 -04:00
Theodore Ts'o 8a0aba733d ext4: let the block device know when unused blocks can be discarded
Let the block device know when unused blocks can be discarded, using
the new sb_issue_discard() interface.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-16 10:06:27 -04:00
Aneesh Kumar K.V a1aebc1e2d ext4: Don't reuse released data blocks until transaction commits
We need to make sure we don't reuse the data blocks released
during the transaction untill the transaction commits. We force
this mode only for ordered and journalled mode. Writeback mode
already don't provided data consistency.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-10-10 20:13:31 -04:00
Aneesh Kumar K.V c894058d66 ext4: Use an rbtree for tracking blocks freed during transaction.
With this patch we track the block freed during a transaction using
red-black tree.  We also make sure contiguous blocks freed are collected
in one node in the tree.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-10-16 10:14:27 -04:00
Aneesh Kumar K.V c2774d84fd ext4: Do mballoc init before doing filesystem recovery
During filesystem recovery we may be doing a truncate
which expects some of the mballoc data structures to
be initialized. So do ext4_mb_init before recovery.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-10-10 20:07:20 -04:00
Aneesh Kumar K.V 688f05a019 ext4: Free ext4_prealloc_space using kmem_cache_free
We should use kmem_cache_free to free memory allocated
via kmem_cache_alloc

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-10-13 12:14:14 -04:00
Steven Whitehouse a447c09324 vfs: Use const for kernel parser table
This is a much better version of a previous patch to make the parser
tables constant. Rather than changing the typedef, we put the "const" in
all the various places where its required, allowing the __initconst
exception for nfsroot which was the cause of the previous trouble.

This was posted for review some time ago and I believe its been in -mm
since then.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Alexander Viro <aviro@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13 10:10:37 -07:00
Alexander Beregalov 3244fcb1ae ext4: fix build failure without procfs
fs/ext4/super.c: In function 'ext4_fill_super':
fs/ext4/super.c:2226: error: 'ext4_ui_proc_fops' undeclared (first use
in this function)
fs/ext4/super.c:2226: error: (Each undeclared identifier is reported
only once
fs/ext4/super.c:2226: error: for each function it appears in.)

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-10-12 17:27:49 -04:00
Hidehiro Kawai 5bf5683a33 ext4: add an option to control error handling on file data
If the journal doesn't abort when it gets an IO error in file data
blocks, the file data corruption will spread silently.  Because
most of applications and commands do buffered writes without fsync(),
they don't notice the IO error.  It's scary for mission critical
systems.  On the other hand, if the journal aborts whenever it gets
an IO error in file data blocks, the system will easily become
inoperable.  So this patch introduces a filesystem option to
determine whether it aborts the journal or just call printk() when
it gets an IO error in file data.

If you mount an ext4 fs with data_err=abort option, it aborts on file
data write error.  If you mount it with data_err=ignore, it doesn't
abort, just call printk().  data_err=ignore is the default.

Here is the corresponding patch of the ext3 version:
http://kerneltrap.org/mailarchive/linux-kernel/2008/9/9/3239374

Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-10-10 22:12:43 -04:00
Hidehiro Kawai 7ffe1ea894 ext4: add checks for errors from jbd2
If the journal has aborted due to a checkpointing failure, we
have to keep the contents of the journal space.  Otherwise, the
filesystem will lose uncheckpointed metadata completely and
become inconsistent.  To avoid this, we need to keep needs_recovery
flag if checkpoint has failed.

With this patch, ext4_put_super() detects a checkpointing failure
from the return value of journal_destroy(), then it invokes
ext4_abort() to make the filesystem read only and keep
needs_recovery flag.  Errors from jbd2_journal_flush() are also
handled by this patch in some places.

Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-10-10 20:29:21 -04:00
Theodore Ts'o 03010a3350 ext4: Rename ext4dev to ext4
The ext4 filesystem is getting stable enough that it's time to drop
the "dev" prefix.  Also remove the requirement for the TEST_FILESYS
flag.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-10 20:02:48 -04:00
Andi Kleen 39d80c33a0 ext4: Avoid double dirtying of super block in ext4_put_super()
While reading code I noticed that ext4_put_super() dirties the 
superblock bh twice. It is always done in ext4_commit_super()
too. Remove the redundant dirty operation.
Should be a nop semantically.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-10-06 21:37:44 -04:00
Eric Sandeen 6873fa0de1 Hook ext4 to the vfs fiemap interface.
ext4_ext_walk_space() was reinstated to be used for iterating over file
extents with a callback; it is used by the ext4 fiemap implementation.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: linux-ext4@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
2008-10-07 00:46:36 -04:00
Kalpak Shah 4d20c685fa ext4: fix xattr deadlock
ext4_xattr_set_handle() eventually ends up calling
ext4_mark_inode_dirty() which tries to expand the inode by shifting
the EAs.  This leads to the xattr_sem being downed again and leading
to a deadlock.

This patch makes sure that if ext4_xattr_set_handle() is in the
call-chain, ext4_mark_inode_dirty() will not expand the inode.

Signed-off-by: Kalpak Shah <kalpak.shah@sun.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-08 23:21:54 -04:00
Theodore Ts'o ede86cc473 ext4: Add debugging markers that can be used by systemtap
This debugging markers are designed to debug problems such as the
random filesystem latency problems reported by Arjan.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-05 20:50:06 -04:00
Frederic Bohe c806e68f56 ext4: fix initialization of UNINIT bitmap blocks
This fixes a bug which caused on-line resizing of filesystems with a
1k blocksize to fail.  The root cause of this bug was the fact that if
an uninitalized bitmap block gets read in by userspace (which
e2fsprogs does try to avoid, but can happen when the blocksize is less
than the pagesize and an adjacent blocks is read into memory)
ext4_read_block_bitmap() was erroneously depending on the buffer
uptodate flag to decide whether it needed to initialize the bitmap
block in memory --- i.e., to set the standard set of blocks in use by
a block group (superblock, bitmaps, inode table, etc.).  Essentially,
ext4_read_block_bitmap() assumed it was the only routine that might
try to read a block containing a block bitmap, which is simply not
true.  

To fix this, ext4_read_block_bitmap() and ext4_read_inode_bitmap()
must always initialize uninitialized bitmap blocks.  Once a block or
inode is allocated out of that bitmap, it will be marked as
initialized in the block group descriptor, so in general this won't
result any extra unnecessary work.

Signed-off-by: Frederic Bohe <frederic.bohe@bull.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-10 08:09:18 -04:00
Theodore Ts'o c2ea3fde61 ext4: Remove old legacy block allocator
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-10 09:40:52 -04:00
Theodore Ts'o 240799cdf2 ext4: Use readahead when reading an inode from the inode table
With modern hard drives, reading 64k takes roughly the same time as
reading a 4k block.  So request readahead for adjacent inode table
blocks to reduce the time it takes when iterating over directories
(especially when doing this in htree sort order) in a cold cache case.
With this patch, the time it takes to run "git status" on a kernel
tree after flushing the caches via "echo 3 > /proc/sys/vm/drop_caches"
is reduced by 21%.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-09 23:53:47 -04:00
Theodore Ts'o 5e8814f2f7 ext4: Combine proc file handling into a single set of functions
Previously mballoc created a separate set of functions for each proc
file.  This combines the tunables into a single set of functions which
gets used for all of the per-superblock proc files, saving
approximately 2k of compiled object code.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-23 18:07:35 -04:00
Theodore Ts'o 9f6200bbfc ext4: move /proc setup and teardown out of mballoc.c
...and into the core setup/teardown code in fs/ext4/super.c so that
other parts of ext4 can define tuning parameters.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-23 09:18:24 -04:00
Theodore Ts'o f702ba0fd7 ext4: Don't use 'struct dentry' for internal lookups
This is a port of a patch from Linus which fixes a 200+ byte stack
usage problem in ext4_get_parent().

It's more efficient to pass down only the actual parts of the dentry
that matter: the parent inode and the name, instead of allocating a
struct dentry on the stack.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-22 15:21:01 -04:00
Theodore Ts'o 914258bf2c ext4/jbd2: Avoid WARN() messages when failing to write to the superblock
This fixes some very common warnings reported by kerneloops.org

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-06 21:35:40 -04:00
Eric Sandeen 730c213c79 ext4: use percpu data structures for lg_prealloc_list
lg_prealloc_list seems to cry out for a per-cpu data structure; on a large
smp system I think this should be better.  I've lightly tested this change
on a 4-cpu system.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-13 15:23:29 -04:00
Theodore Ts'o 8eea80d52b ext4: Renumber EXT4_IOC_MIGRATE
Pick an ioctl number for EXT4_IOC_MIGRATE that won't conflict with
other ext4 ioctl's.  Since there haven't been any major userspace
users of this ioctl, we can afford to change this now, to avoid
potential problems later.

Also, reorder the ioctl numbers in ext4.h to avoid this sort of
mistake in the future.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-13 19:54:35 -04:00
Aneesh Kumar K.V 4db46fc266 ext4: hook the ext3 migration interface to the EXT4_IOC_SETFLAGS ioctl
This patch hooks the ext3 to ext4 migrate interface to
EXT4_IOC_SETFLAGS ioctl. The userspace interface is via chattr +e.  We
only allow setting extent flags.  Clearing extent flag (migrating from
ext4 to ext3) is not supported.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-08 23:34:06 -04:00
Aneesh Kumar K.V 2a43a87800 ext4: elevate write count for migrate ioctl
The migrate ioctl writes to the filsystem, so we need to elevate the
write count.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-13 12:52:26 -04:00
Li Zefan 7ee1ec4ca3 ext4: add missing unlock in ext4_check_descriptors() on error path
If there group descriptors are corrupted we need unlock the block
group lock before returning from the function; else we will oops when
freeing a spinlock which is still being held.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-08 10:47:19 -04:00
Theodore Ts'o 05496769e5 jbd2: clean up how the journal device name is printed
Calculate the journal device name once and stash it away in the
journal_s structure.  This avoids needing to call bdevname()
everywhere and reduces stack usage by not needing to allocate an
on-stack buffer.  In addition, we eliminate the '/' that can appear in
device names (e.g. "cciss/c0d0p9" --- see kernel bugzilla #11321) that
can cause problems when creating proc directory names, and include the
inode number to support ocfs2 which creates multiple journals with
different inode numbers.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-16 14:36:17 -04:00
Alexey Dobriyan 899fc1a4cf ext4: fix #11321: create /proc/ext4/*/stats more carefully
ext4 creates per-suberblock directory in /proc/ext4/ . Name used as
basis is taken from bdevname, which, surprise, can contain slash.

However, proc while allowing to use proc_create("a/b", parent) form of
PDE creation, assumes that parent/a was already created.

bdevname in question is 'cciss/c0d0p9', directory is not created and all
this stuff goes directly into /proc (which is real bug).

Warning comes when _second_ partition is mounted.

http://bugzilla.kernel.org/show_bug.cgi?id=11321

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-14 10:21:33 -04:00
Frederic Bohe c62a11fd95 Update flex_bg free blocks and free inodes counters when resizing.
This fixes a bug which prevented the newly created inodes after a
resize from being used on filesystems with flex_bg.

Signed-off-by: Frederic Bohe <frederic.bohe@bull.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-08 10:20:24 -04:00
Eric Sandeen 9d9f177572 ext4: Avoid printk floods in the face of directory corruption
Note: some people thinks this represents a security bug, since it
might make the system go away while it is printing a large number of
console messages, especially if a serial console is involved.  Hence,
it has been assigned CVE-2008-3528, but it requires that the attacker
either has physical access to your machine to insert a USB disk with a
corrupted filesystem image (at which point why not just hit the power
button), or is otherwise able to convince the system administrator to
mount an arbitrary filesystem image (at which point why not just
include a setuid shell or world-writable hard disk device file or some
such).  Me, I think they're just being silly. --tytso

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: linux-ext4@vger.kernel.org
Cc: Eugene Teo <eugeneteo@kernel.sg>
2008-10-09 11:15:52 -04:00
Aneesh Kumar K.V cf17fea657 ext4: Properly update i_disksize.
With delayed allocation we use i_data_sem to update i_disksize.  We need
to update i_disksize only if the new size specified is greater than the
current value and we need to make sure we don't race with other
i_disksize update.  With delayed allocation we will switch to the
write_begin function for non-delayed allocation if we are low on free
blocks.  This means the write_begin function for non-delayed allocation
also needs to use the same locking.

We also need to check and update i_disksize even if the new size is less
that inode.i_size because of delayed allocation.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-13 13:06:18 -04:00
Aneesh Kumar K.V ae4d537211 ext4: truncate block allocated on a failed ext4_write_begin
For blocksize < pagesize we need to remove blocks that got allocated in
block_write_begin() if we fail with ENOSPC for later blocks.
block_write_begin() internally does this if it allocated pages locally.
This makes sure we don't have blocks outside inode.i_size during ENOSPC.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-13 13:10:25 -04:00
Aneesh Kumar K.V df22291ff0 ext4: Retry block allocation if we have free blocks left
When we truncate files, the meta-data blocks released are not reused
untill we commit the truncate transaction.  That means delayed get_block
request will return ENOSPC even if we have free blocks left.  Force a
journal commit and retry block allocation if we get ENOSPC with free
blocks left.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-08 23:05:34 -04:00
Aneesh Kumar K.V 166348dd37 ext4: Don't add the inode to journal handle until after the block is allocated
Make sure we don't add the inode to the journal handle until after the
block allocation, so that a journal commit will not include the inode in
case of block allocation failure.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-08 23:08:40 -04:00
Aneesh Kumar K.V 68629f29c6 ext4: Fix ext4 nomballoc allocator for ENOSPC
We run into ENOSPC error on nonmballoc ext4, even when there is free blocks
on the filesystem.

The patch includes two changes:

a) Set reservation to NULL if we trying to allocate near group_target_block
from the goal group if the free block in the group is less than windows.
This should give us a better chance to allocate near group_target_block.
This also ensures that if we are not allocating near group_target_block
then we don't trun off reservation. This should enable us to allocate
with reservation from other groups that have large free blocks count.

b) we don't need to check the window size if the block reservation is off.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-08 23:09:17 -04:00
Aneesh Kumar K.V 5c79161689 ext4: Signed arithmetic fix
This patch converts some usage of ext4_fsblk_t to s64.  This is needed
so that some of the sign conversion works as expected in if loops.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-08 23:12:24 -04:00
Aneesh Kumar K.V 79f0be8d2e ext4: Switch to non delalloc mode when we are low on free blocks count.
The delayed allocation code allocates blocks during writepages(), which
can not handle block allocation failures.  To deal with this, we switch
away from delayed allocation mode when we are running low on free
blocks.  This also allows us to avoid needing to reserve a large number
of meta-data blocks in case all of the requested blocks are
discontiguous.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-08 23:13:30 -04:00
Aneesh Kumar K.V 6bc6e63fcd ext4: Add percpu dirty block accounting.
This patch adds dirty block accounting using percpu_counters.  Delayed
allocation block reservation is now done by updating dirty block
counter.  In a later patch we switch to non delalloc mode if the
filesystem free blocks is greater than 150% of total filesystem dirty
blocks

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao<cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-10 09:39:00 -04:00
Aneesh Kumar K.V 030ba6bc67 ext4: Retry block reservation
During block reservation if we don't have enough blocks left, retry
block reservation with smaller block counts.  This makes sure we try
fallocate and DIO with smaller request size and don't fail early.  The
delayed allocation reservation cannot try with smaller block count. So
retry block reservation to handle temporary disk full conditions.  Also
print free blocks details if we fail block allocation during writepages.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-08 23:14:50 -04:00
Aneesh Kumar K.V a30d542a00 ext4: Make sure all the block allocation paths reserve blocks
With delayed allocation we need to make sure block are reserved before
we attempt to allocate them. Otherwise we get block allocation failure
(ENOSPC) during writepages which cannot be handled. This would mean
silent data loss (We do a printk stating data will be lost). This patch
updates the DIO and fallocate code path to do block reservation before
block allocation. This is needed to make sure parallel DIO and fallocate
request doesn't take block out of delayed reserve space.

When free blocks count go below a threshold we switch to a slow patch
which looks at other CPU's accumulated percpu counter values.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-09 10:56:23 -04:00
Aneesh Kumar K.V c4a0c46ec9 ext4: invalidate pages if delalloc block allocation fails.
We are a bit agressive in invalidating all the pages. But
it is ok because we really don't know why the block allocation
failed and it is better to come of the writeback path
so that user can look for more info.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-08-19 21:08:18 -04:00
Theodore Ts'o af5bc92dde ext4: Fix whitespace checkpatch warnings/errors
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-08 22:25:24 -04:00
Theodore Ts'o e5f8eab885 ext4: Fix long long checkpatch warnings
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-08 22:25:04 -04:00
Theodore Ts'o 4776004f54 ext4: Add printk priority levels to clean up checkpatch warnings
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-08 23:00:52 -04:00
Mingming Cao 1f7c14c62c percpu counter: clean up percpu_counter_sum_and_set()
percpu_counter_sum_and_set() and percpu_counter_sum() is the same except
the former updates the global counter after accounting.  Since we are
taking the fbc->lock to calculate the precise value of the counter in
percpu_counter_sum() anyway, it should simply set fbc->count too, as the
percpu_counter_sum_and_set() does.

This patch merges these two interfaces into one.
 
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-09 12:50:59 -04:00
Aneesh Kumar K.V 5e745b041f ext4: Fix small file fragmentation
For small file block allocations, mballoc uses per cpu prealloc
space.  Use goal block when searching for the right prealloc
space.  Also make sure ext4_da_writepages tries to write
all the pages for small files in single attempt

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-08-18 18:00:57 -04:00
Aneesh Kumar K.V 91246c0090 ext4: Initialize writeback_index to 0 when allocating a new inode
The write_cache_pages() function uses the mapping->writeback_index as
the starting index to write out when range_cyclic is set.  Properly
initialize writeback_index so that we start the writeout at index 0.

This was found when debugging the small file fragmentation on ext4.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-08-19 21:14:52 -04:00
Aneesh Kumar K.V 16eb729564 ext4: make sure ext4_has_free_blocks returns 0 for ENOSPC
Fix ext4_has_free_blocks() to return 0 when we don't have enough space.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-08-19 21:16:54 -04:00
Mingming Cao 525f4ed8dc ext4: journal credit fix for the delayed allocation's writepages() function
Previous delalloc writepages implementation started a new transaction
outside of a loop which called get_block() to do the block allocation.
Since we didn't know exactly how many blocks would need to be allocated,
the estimated journal credits required was very conservative and caused
many issues.

With the reworked delayed allocation, a new transaction is created for
each get_block(), thus we don't need to guess how many credits for the
multiple chunk of allocation.  We start every transaction with enough
credits for inserting a single exent.  When estimate the credits for
indirect blocks to allocate a chunk of blocks, we need to know the
number of data blocks to allocate.  We use the total number of reserved
delalloc datablocks; if that is too big, for non-extent files, we need
to limit the number of blocks to EXT4_MAX_TRANS_BLOCKS.

Code cleanup from Aneesh.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Reviewed-off-by:  Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-08-19 22:15:58 -04:00
Aneesh Kumar K.V a1d6cc563b ext4: Rework the ext4_da_writepages() function
With the below changes we reserve credit needed to insert only one
extent resulting from a call to single get_block.  This makes sure we
don't take too much journal credits during writeout.  We also don't
limit the pages to write.  That means we loop through the dirty pages
building largest possible contiguous block request.  Then we issue a
single get_block request.  We may get less block that we requested.  If
so we would end up not mapping some of the buffer_heads.  That means
those buffer_heads are still marked delay.  Later in the writepage
callback via __mpage_writepage we redirty those pages.

We should also not limit/throttle wbc->nr_to_write in the filesystem
writepages callback. That cause wrong behaviour in
generic_sync_sb_inodes caused by wbc->nr_to_write being <= 0

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-08-19 21:55:02 -04:00
Mingming Cao f3bd1f3fa8 ext4: journal credits reservation fixes for DIO, fallocate
DIO and fallocate credit calculation is different than writepage, as
they do start a new journal right for each call to ext4_get_blocks_wrap().
This patch uses the helper function in DIO and fallocate case, passing
a flag indicating that the modified data are contigous thus could account
less indirect/index blocks.

This patch also fixed the journal credit reservation for direct I/O
(DIO).  Previously the estimated credits for DIO only was calculated for
non-extent files, which was not enough if the file is extent-based.

Also fixed was fallocate double-counting credits for modifying the the
superblock.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-08-19 22:16:03 -04:00
Mingming Cao ee12b63068 ext4: journal credits reservation fixes for extent file writepage
This patch modified the writepage/write_begin credit calculation for
extent files, to use the credits caculation helper function.

The current calculation of how many index/leaf blocks should be
accounted is too conservetive, it always considered the worse case,
where the tree level is 5, and in the case of multiple chunk
allocations, it always assumed no blocks were dirtied in common across
the allocations. This path uses the accurate depth of the inode with
some extras to calculate the index blocks, and also less conservative in
the case of multiple allocation accounting.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-08-19 22:16:05 -04:00
Mingming Cao a02908f19c ext4: journal credits calulation cleanup and fix for non-extent writepage
When considering how many journal credits are needed for modifying a
chunk of data, we need to account for the super block, inode block,
quota blocks and xattr block, indirect/index blocks, also, group bitmap
and group descriptor blocks for new allocation (including data and
indirect/index blocks). There are many places in ext4 do the calculation
on their own and often missed one or two meta blocks, and often they
assume single block allocation, and did not considering the multile
chunk of allocation case.

This patch is trying to cleanup current journal credit code, provides
some common helper funtion to calculate the journal credits, to be used
for writepage, writepages, DIO, fallocate, migration, defrag, and for
both nonextent and extent files.

This patch modified the writepage/write_begin credit caculation for
nonextent files, to use the new helper function. It also fixed the
problem that writepage on nonextent files did not consider the case
blocksize <pagesize, thus could possibelly need multiple block
allocation in a single transaction.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-08-19 22:16:07 -04:00
Eric Sandeen c001077f40 ext4: Fix bug where we return ENOSPC even though we have plenty of inodes
The find_group_flex() function starts with best_flex as the
parent_fbg_group, which happens to have 0 inodes free.  Some of the
flex groups searched have free blocks and free inodes, but the
flex_freeb_ratio is < 10, so they're skipped.  Then when a group is
compared to the current "best" flex group, it does not have more free
blocks than "best", so it is skipped as well.

This continues until no flex group with free inodes is found which has
a proper ratio or which has more free blocks than the "best" group,
and we're left with a "best" group that has 0 inodes free, and we
return -ENOSPC.

We fix this by changing the logic so that if the current "best" flex
group has no inodes free, and the current one does have room, it is
promoted to the next "best."

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-08-19 22:19:50 -04:00
Josef Bacik 37609fd5ae ext4: don't try to resize if there are no reserved gdt blocks left
When trying to resize an ext4 fs and you run out of reserved gdt blocks,
you get an error that doesn't actually tell you what went wrong, it just
says that the gdb it picked is not correct, which is the case since you
don't have any reserved gdt blocks left.  This patch adds a check to make
sure you have reserved gdt blocks to use, and if not prints out a more
relevant error.

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Andreas Dilger <adilger@sun.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-08-19 22:13:41 -04:00
Theodore Ts'o 88aa3cff4e ext4: Use ext4_discard_reservations instead of mballoc-specific call
In ext4_ext_truncate(), we should use the more generic
ext4_discard_reservations() call so we do the right thing when the
filesystem is mounted with the nomballoc option.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Mingming Cao <cmm@us.ibm.com>
2008-08-16 07:57:35 -04:00
Theodore Ts'o d015641734 ext4: Fix ext4_dx_readdir hash collision handling
This fixes a bug where readdir() would return a directory entry twice
if there was a hash collision in an hash tree indexed directory.

Signed-off-by: Eugene Dashevsky <eugene@ibrix.com>
Signed-off-by: Mike Snitzer <msnitzer@ibrix.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-08-19 21:57:43 -04:00
Mingming Cao cd21322616 ext4: Fix delalloc release block reservation for truncate
Ext4 will release the reserved blocks for delayed allocations when
inode is truncated/unlinked.  If there is no reserved block at all, we
shouldn't need to do so.  But current code still tries to release the
reserved blocks regardless whether the counters's value is 0.
Continue to do that causes the later calculation to go wrong and a
kernel BUG_ON() caught that. This doesn't happen for extent-based
files, as the calculation for 0 reserved blocks was right for extent
based file.

This patch fixed the kernel BUG() due to above reason.  It adds checks
for 0 to avoid unnecessary release and fix calculation for non-extent
files.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-08-19 22:16:59 -04:00
Theodore Ts'o b4df203085 ext4: Fix potential truncate BUG due to i_prealloc_list being non-empty
We need to call ext4_discard_reservation() earlier in ext4_truncate(),
to avoid a BUG() in ext4_mb_return_to_preallocation(), which is called
(ultimately) by ext4_free_blocks().  So we must ditch the blocks on
i_prealloc_list before we start freeing the data blocks.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-08-13 21:44:34 -04:00
Aneesh Kumar K.V bf068ee266 ext4: Handle unwritten extent properly with delayed allocation
When using fallocate the buffer_heads are marked unwritten and unmapped.
We need to map them in the writepages after a get_block.  Otherwise we
split the uninit extents, but never write the content to disk.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-08-19 22:16:43 -04:00
Linus Torvalds 8f616cd524 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: remove write-only variables from ext4_ordered_write_end
  ext4: unexport jbd2_journal_update_superblock
  ext4: Cleanup whitespace and other miscellaneous style issues
  ext4: improve ext4_fill_flex_info() a bit
  ext4: Cleanup the block reservation code path
  ext4: don't assume extents can't cross block groups when truncating
  ext4: Fix lack of credits BUG() when deleting a badly fragmented inode
  ext4: Fix ext4_ext_journal_restart()
  ext4: fix ext4_da_write_begin error path
  jbd2: don't abort if flushing file data failed
  ext4: don't read inode block if the buffer has a write error
  ext4: Don't allow lg prealloc list to be grow large.
  ext4: Convert the usage of NR_CPUS to nr_cpu_ids.
  ext4: Improve error handling in mballoc
  ext4: lock block groups when initializing
  ext4: sync up block and inode bitmap reading functions
  ext4: Allow read/only mounts with corrupted block group checksums
  ext4: Fix data corruption when writing to prealloc area
2008-08-03 10:50:44 -07:00
Eric Sandeen 7d55992d60 ext4: remove write-only variables from ext4_ordered_write_end
The variables 'from' and 'to' are not used anywhere.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-08-02 21:22:18 -04:00
Al Viro 77e69dac3c [PATCH] fix races and leaks in vfs_quota_on() users
* new helper: vfs_quota_on_path(); equivalent of vfs_quota_on() sans the
  pathname resolution.
* callers of vfs_quota_on() that do their own pathname resolution and
  checks based on it are switched to vfs_quota_on_path(); that way we
  avoid the races.
* reiserfs leaked dentry/vfsmount references on several failure exits.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-08-01 11:25:25 -04:00
Hisashi Hifumi 8ab22b9abb vfs: pagecache usage optimization for pagesize!=blocksize
When we read some part of a file through pagecache, if there is a
pagecache of corresponding index but this page is not uptodate, read IO
is issued and this page will be uptodate.

I think this is good for pagesize == blocksize environment but there is
room for improvement on pagesize != blocksize environment.  Because in
this case a page can have multiple buffers and even if a page is not
uptodate, some buffers can be uptodate.

So I suggest that when all buffers which correspond to a part of a file
that we want to read are uptodate, use this pagecache and copy data from
this pagecache to user buffer even if a page is not uptodate.  This can
reduce read IO and improve system throughput.

I wrote a benchmark program and got result number with this program.

This benchmark do:

  1: mount and open a test file.

  2: create a 512MB file.

  3: close a file and umount.

  4: mount and again open a test file.

  5: pwrite randomly 300000 times on a test file.  offset is aligned
     by IO size(1024bytes).

  6: measure time of preading randomly 100000 times on a test file.

The result was:
	2.6.26
        330 sec

	2.6.26-patched
        226 sec

Arch:i386
Filesystem:ext3
Blocksize:1024 bytes
Memory: 1GB

On ext3/4, a file is written through buffer/block.  So random read/write
mixed workloads or random read after random write workloads are optimized
with this patch under pagesize != blocksize environment.  This test result
showed this.

The benchmark program is as follows:

#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#include <time.h>
#include <stdlib.h>
#include <string.h>
#include <sys/mount.h>

#define LEN 1024
#define LOOP 1024*512 /* 512MB */

main(void)
{
	unsigned long i, offset, filesize;
	int fd;
	char buf[LEN];
	time_t t1, t2;

	if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) {
		perror("cannot mount\n");
		exit(1);
	}
	memset(buf, 0, LEN);
	fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC);
	if (fd < 0) {
		perror("cannot open file\n");
		exit(1);
	}
	for (i = 0; i < LOOP; i++)
		write(fd, buf, LEN);
	close(fd);
	if (umount("/root/test1/") < 0) {
		perror("cannot umount\n");
		exit(1);
	}
	if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) {
		perror("cannot mount\n");
		exit(1);
	}
	fd = open("/root/test1/testfile", O_RDWR);
	if (fd < 0) {
		perror("cannot open file\n");
		exit(1);
	}

	filesize = LEN * LOOP;
	for (i = 0; i < 300000; i++){
		offset = (random() % filesize) & (~(LEN - 1));
		pwrite(fd, buf, LEN, offset);
	}
	printf("start test\n");
	time(&t1);
	for (i = 0; i < 100000; i++){
		offset = (random() % filesize) & (~(LEN - 1));
		pread(fd, buf, LEN, offset);
	}
	time(&t2);
	printf("%ld sec\n", t2-t1);
	close(fd);
	if (umount("/root/test1/") < 0) {
		perror("cannot umount\n");
		exit(1);
	}
}

Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jan Kara <jack@ucw.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 16:30:21 -07:00
Al Viro e6305c43ed [PATCH] sanitize ->permission() prototype
* kill nameidata * argument; map the 3 bits in ->flags anybody cares
  about to new MAY_... ones and pass with the mask.
* kill redundant gfs2_iop_permission()
* sanitize ecryptfs_permission()
* fix remaining places where ->permission() instances might barf on new
  MAY_... found in mask.

The obvious next target in that direction is permission(9)

folded fix for nfs_permission() breakage from Miklos Szeredi <mszeredi@suse.cz>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26 20:53:14 -04:00
Theodore Ts'o 2b2d6d0197 ext4: Cleanup whitespace and other miscellaneous style issues
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-26 16:15:44 -04:00
Alexey Dobriyan 51cc50685a SL*B: drop kmem cache argument from constructor
Kmem cache passed to constructor is only needed for constructors that are
themselves multiplexeres.  Nobody uses this "feature", nor does anybody uses
passed kmem cache in non-trivial way, so pass only pointer to object.

Non-trivial places are:
	arch/powerpc/mm/init_64.c
	arch/powerpc/mm/hugetlbpage.c

This is flag day, yes.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Matt Mackall <mpm@selenic.com>
[akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c]
[akpm@linux-foundation.org: fix mm/slab.c]
[akpm@linux-foundation.org: fix ubifs]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:07 -07:00
Li Zefan ec05e868ac ext4: improve ext4_fill_flex_info() a bit
- use kzalloc() instead of kmalloc() + memset()
- improve a printk info

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-07-24 12:49:59 -04:00
Aneesh Kumar K.V 12219aea6b ext4: Cleanup the block reservation code path
The truncate patch should not use the i_allocated_meta_blocks
value. So add seperate functions to be used in the truncate
and alloc path. We also need to release the meta-data block
that we reserved for the blocks that we are truncating.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-07-17 16:12:08 -04:00
Theodore Ts'o 34071da71a ext4: don't assume extents can't cross block groups when truncating
With the FLEX_BG layout, there is no reason why extents can't cross
block groups, so make the truncate code reserve enough credits so we
don't BUG if we come across such an extent.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-08-01 21:59:19 -04:00
Theodore Ts'o bc965ab3f2 ext4: Fix lack of credits BUG() when deleting a badly fragmented inode
The extents codepath for ext4_truncate() requests journal transaction
credits in very small chunks, requesting only what is needed.  This
means there may not be enough credits left on the transaction handle
after ext4_truncate() returns and then when ext4_delete_inode() tries
finish up its work, it may not have enough transaction credits,
causing a BUG() oops in the jbd2 core.

Also, reserve an extra 2 blocks when starting an ext4_delete_inode()
since we need to update the inode bitmap, as well as update the
orphaned inode linked list.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-08-02 21:10:38 -04:00
Theodore Ts'o 0123c93998 ext4: Fix ext4_ext_journal_restart()
The ext4_ext_journal_restart() is a convenience function which checks
to see if the requested number of credits is present, and if so it
closes the current transaction and attaches the current handle to the
new transaction.  Unfortunately, it wasn't proprely checking the
return value from ext4_journal_extend(), so it was starting a new
transaction when one was not necessary, and returning an error when
all that was necessary was to restart the handle with a new
transaction.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-08-01 20:57:54 -04:00
Eric Sandeen d5a0d4f732 ext4: fix ext4_da_write_begin error path
ext4_da_write_begin needs to call journal_stop before returning,
if the page allocation fails.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-08-02 18:51:06 -04:00
Hidehiro Kawai 9c83a923c6 ext4: don't read inode block if the buffer has a write error
A transient I/O error can corrupt inode data.  Here is the scenario:

(1) update inode_A at the block_B
(2) pdflush writes out new inode_A to the filesystem, but it results
    in write I/O error, at this point, BH_Uptodate flag of the buffer
    for block_B is cleared and BH_Write_EIO is set
(3) create new inode_C which located at block_B, and
    __ext4_get_inode_loc() tries to read on-disk block_B because the
    buffer is not uptodate
(4) if it can read on-disk block_B successfully, inode_A is
    overwritten by old data

This patch makes __ext4_get_inode_loc() not read the inode block if the
buffer has BH_Write_EIO flag.  In this case, the buffer should have the
latest information, so setting the uptodate flag to the buffer (this
avoids WARN_ON_ONCE() in mark_buffer_dirty().)

According to this change, we would need to test BH_Write_EIO flag for the
error checking.  Currently nobody checks write I/O errors on metadata
buffers, but it will be done in other patches I'm working on.

Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: sugita <yumiko.sugita.yf@hitachi.com>
Cc: Satoshi OSHIMA <satoshi.oshima.fk@hitachi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Jan Kara <jack@ucw.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-07-26 16:39:26 -04:00
Aneesh Kumar K.V 6be2ded1d7 ext4: Don't allow lg prealloc list to be grow large.
Currently, the locality group prealloc list is freed only when there
is a block allocation failure. This can result in large number of
entries in the preallocation list making ext4_mb_use_preallocated()
expensive.

To fix this, we convert the locality group prealloc list to a hash
list. The hash index is the order of number of blocks in the prealloc
space with a max order of 9. When adding prealloc space to the list we
make sure total entries for each order does not exceed 8. If it is
more than 8 we discard few entries and make sure the we have only <= 5
entries.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-07-23 14:14:05 -04:00
Aneesh Kumar K.V 1320cbcf77 ext4: Convert the usage of NR_CPUS to nr_cpu_ids.
NR_CPUS can be really large. We should be using nr_cpu_ids instead.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-07-23 14:09:26 -04:00
Aneesh Kumar K.V ce89f46cb8 ext4: Improve error handling in mballoc
Don't call BUG_ON on file system failures. Instead use ext4_error and
also handle the continue case properly.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-07-23 14:09:29 -04:00
Eric Sandeen b5f10eed81 ext4: lock block groups when initializing
I noticed when filling a 1T filesystem with 4 threads using the
fs_mark benchmark:

fs_mark -d /mnt/test -D 256 -n 100000 -t 4 -s 20480 -F -S 0

that I occasionally got checksum mismatch errors:

EXT4-fs error (device sdb): ext4_init_inode_bitmap: Checksum bad for group 6935

etc.  I'd reliably get 4-5 of them during the run.

It appears that the problem is likely a race to init the bg's
when the uninit_bg feature is enabled.

With the patch below, which adds sb_bgl_locking around initialization,
I was able to complete several runs with no errors or warnings.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-08-02 21:21:08 -04:00
Eric Sandeen e29d1cde63 ext4: sync up block and inode bitmap reading functions
ext4_read_block_bitmap and read_inode_bitmap do essentially
the same thing, and yet they are structured quite differently.
I came across this difference while looking at doing bg locking
during bg initialization.

This patch:

* removes unnecessary casts in the error messages
* renames read_inode_bitmap to ext4_read_inode_bitmap
* and more substantially, restructures the inode bitmap
  reading function to be more like the block bitmap counterpart.

The change to the inode bitmap reader simplifies the locking
to be applied in the next patch.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-08-02 21:21:02 -04:00
Theodore Ts'o 8a266467b8 ext4: Allow read/only mounts with corrupted block group checksums
If the block group checksums are corrupted, still allow the mount to
succeed, so e2fsck can have a chance to try to fix things up.  Add
code in the remount r/w path to make sure the block group checksums
are valid before allowing the filesystem to be remounted read/write.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-26 14:34:21 -04:00
Aneesh Kumar K.V d03856bd5e ext4: Fix data corruption when writing to prealloc area
Inserting an extent can cause a new entry in the already existing index
block. That doesn't increase the depth of the instead. Instead it adds a
new leaf block. Now with the new leaf block the path information
corresponding to the logical block should be fetched from the new block.
The old path will be pointing to the old leaf block.

We need to recalucate the path information on extent insert
even if depth doesn't change. Without this change, the extent merge
after converting an unwritten extent to initialized extent takes the wrong
extent and cause data corruption.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-08-02 18:51:32 -04:00
Eric Sandeen e4079a11f5 ext4: do not set extents feature from the kernel
We've talked for a while about getting rid of any feature-
setting from the kernel; this gets rid of the code which would
set the INCOMPAT_EXTENTS flag on the first file write when mounted
as ext4[dev].

With this patch, if the extents feature is not already set on disk,
then mounting as ext4 will fall back to noextents with a warning,
and if -o extents is explicitly requested, the mount will fail,
also with warning.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Aneesh Kumar K.V c07651b556 ext4: Don't allow nonextenst mount option for large filesystem
The block mapped inode format can address only blocks within 2**32. This
causes a number of issues, the biggest of which is that the block
allocator needs to be taught that certain inodes can not utilize block
numbers > 2**32.  So until this is fixed, it is simplest to fail
mounting of file systems with more than 2**32 blocks if the -o noextents
option is given.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Aneesh Kumar K.V dd919b9822 ext4: Enable delalloc by default.
Enable delalloc by default to ensure it gets sufficient testing and
because it makes the filesystem much more efficient.  Add a nodealalloc
option to disable delayed allocation, and update ext4_show_options to
show delayed allocation off if it is disabled.

If the data=journal mount option is used, disable delayed allocation
since the delalloc code doesn't support data=journal yet.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2008-07-11 19:27:31 -04:00
Mingming Cao 3e3398a08d ext4: delayed allocation i_blocks fix for stat
Right now i_blocks is not getting updated until the blocks are actually
allocaed on disk.  This means with delayed allocation, right after files
are copied, "ls -sF" shoes the file as taking 0 blocks on disk.  "du"
also shows the files taking zero space, which is highly confusing to the
user.

Since delayed allocation already keeps track of per-inode total
number of blocks that are subject to delayed allocation, this patch fix
this by using that to adjust the value returned by stat(2). When real
block allocation is done, the i_blocks will get updated. Since the
reserved blocks for delayed allocation will be decreased, this will be
keep value returned by stat(2) consistent.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Mingming Cao 632eaeab1f ext4: fix delalloc i_disksize early update issue
Ext4_da_write_end() used walk_page_buffers() with a callback function of
ext4_bh_unmapped_or_delay() to check if it extended the file size
without allocating any blocks (since in this case i_disksize needs to be
updated).  However, this is didn't work proprely because the buffer head
has not been marked dirty yet --- this is done later in
block_commit_write() --- which caused ext4_bh_unmapped_or_delay() to
always return false.

In addition, walk_page_buffers() checks all of the buffer heads covering
the page, and the only buffer_head that should be checked is the one
covering the end of the write.  Otherwise, given a 1k blocksize
filesystem and a 4k page size, the buffer head covering the first 1k
stripe of the file could be unmapped (because it was a sparse file), and
the second or third buffer_head covering that page could be mapped, and
using walk_page_buffers() would fail in this case since it would stop at
the first unmapped buffer_head and return true.

The core problem is that walk_page_buffers() was intended to do work in
a callback function, and a non-zero return value indicated a failure,
which termined the walk of the buffer heads covering the page.  It was
not intended to be used with a boolean function, such as
ext4_bh_unmapped_or_delay().

Add addtional fix from Aneesh to protect i_disksize update rave with truncate.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Aneesh Kumar K.V f0e6c98593 ext4: Handle page without buffers in ext4_*_writepage()
It can happen that buffers are removed from the page before it gets
marked dirty and then is passed to writepage().  In writepage() we just
initialize the buffers and check whether they are mapped and non
delay. If they are mapped and non delay we write the page. Otherwise we
mark them dirty.  With this change we don't do block allocation at all
in ext4_*_write_page.

writepage() can get called under many condition and with a locking order
of journal_start -> lock_page, we should not try to allocate blocks in
writepage() which get called after taking page lock.  writepage() can
get called via shrink_page_list even with a journal handle which was
created for doing inode update.  For example when doing
ext4_da_write_begin we create a journal handle with credit 1 expecting a
i_disksize update for the inode. But ext4_da_write_begin can cause
shrink_page_list via _grab_page_cache. So having a valid handle via
ext4_journal_current_handle is not a guarantee that we can use the
handle for block allocation in writepage, since we shouldn't be using
credits that had been reserved for other updates.  That it could result
in we running out of credits when we update inodes.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Aneesh Kumar K.V cd1aac3292 ext4: Add ordered mode support for delalloc
This provides a new ordered mode implementation which gets rid of using
buffer heads to enforce the ordering between metadata change with the
related data chage.  Instead, in the new ordering mode, it keeps track
of all of the inodes touched by each transaction on a list, and when
that transaction is committed, it flushes all of the dirty pages for
those inodes.  In addition, the new ordered mode reverses the lock
ordering of the page lock and transaction lock, which provides easier
support for delayed allocation.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Mingming Cao 61628a3f3a ext4: Invert lock ordering of page_lock and transaction start in delalloc
With the reverse locking, we need to start a transation before taking
the page lock, so in ext4_da_writepages() we need to break the write-out
into chunks, and restart the journal for each chunck to ensure the
write-out fits in a single transaction.

Updated patch from Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
which fixes delalloc sync hang with journal lock inversion, and address
the performance regression issue.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Mingming Cao d2a1763791 ext4: delayed allocation ENOSPC handling
This patch does block reservation for delayed
allocation, to avoid ENOSPC later at page flush time.

Blocks(data and metadata) are reserved at da_write_begin()
time, the freeblocks counter is updated by then, and the number of
reserved blocks is store in per inode counter.
        
At the writepage time, the unused reserved meta blocks are returned
back. At unlink/truncate time, reserved blocks are properly released.

Updated fix from  Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
to fix the oldallocator block reservation accounting with delalloc, added
lock to guard the counters and also fix the reservation for meta blocks.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-07-14 17:52:37 -04:00
Mingming Cao e8ced39d5e percpu_counter: new function percpu_counter_sum_and_set
Delayed allocation need to check free blocks at every write time.
percpu_counter_read_positive() is not quit accurate. delayed
allocation need a more accurate accounting, but using
percpu_counter_sum_positive() is frequently is quite expensive.

This patch added a new function to update center counter when sum
per-cpu counter, to increase the accurate rate for next
percpu_counter_read() and require less calling expensive
percpu_counter_sum().

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Alex Tomas 64769240bd ext4: Add delayed allocation support in data=writeback mode
Updated with fixes from Mingming Cao <cmm@us.ibm.com> to unlock and
release the page from page cache if the delalloc write_begin failed, and
properly handle preallocated blocks.  Also added a fix to clear
buffer_delay in block_write_full_page() after allocating a delayed
buffer.

Updated with fixes from Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
to update i_disksize properly and to add bmap support for delayed
allocation.

Updated with a fix from Valerie Clement <valerie.clement@bull.net> to
avoid filesystem corruption when the filesystem is mounted with the
delalloc option and blocksize < pagesize.

Signed-off-by: Alex Tomas <alex@clusterfs.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by:  Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-07-11 19:27:31 -04:00
Jan Kara 678aaf4814 ext4: Use new framework for data=ordered mode in JBD2
This patch makes ext4 use inode-based implementation of data=ordered mode
in JBD2. It allows us to unify some data=ordered and data=writeback paths
(especially writepage since we don't have to start a transaction anymore)
and remove some buffer walking.

Updated fix from Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
to fix file system hang due to corrupt jinode values.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Jan Kara 9ddfc3dc75 ext4: Fix lock inversion in ext4_ext_truncate()
We cannot call ext4_orphan_add() from under i_data_sem because that
causes a lock ordering violation between i_data_sem and and the
superblock lock.

Updated with Aneesh's locking order fix

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mingming Cao <cmm@us.ibm.com> 
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> 
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Jan Kara cf108bca46 ext4: Invert the locking order of page_lock and transaction start
This changes are needed to support data=ordered mode handling via
inodes.  This enables us to get rid of the journal heads and buffer
heads for data buffers in the ordered mode.  With the changes, during
tranasaction commit we writeout the inode pages using the
writepages()/writepage(). That implies we take page lock during
transaction commit. This can cause a deadlock with the locking order
page_lock -> jbd2_journal_start, since the jbd2_journal_start can wait
for the journal_commit to happen and the journal_commit now needs to
take the page lock. To avoid this dead lock reverse the locking order.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Aneesh Kumar K.V 2e9ee85035 ext4: Use page_mkwrite vma_operations to get mmap write notification.
We would like to get notified when we are doing a write on mmap section.
This is needed with respect to preallocated area. We split the preallocated
area into initialzed extent and uninitialzed extent in the call back. This
let us handle ENOSPC better. Otherwise we get ENOSPC in the writepage and
that would result in data loss. The changes are also needed to handle ENOSPC
when writing to an mmap section of files with holes.

Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Frederic Bohe 5f21b0e642 ext4: fix online resize with mballoc
Update group infos when updating a group's descriptor.
Add group infos when adding a group's descriptor.
Refresh cache pages used by mb_alloc when changes occur.
This will probably need modifications when META_BG resizing will be allowed.

Signed-off-by: Frederic Bohe <frederic.bohe@bull.net>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2008-07-11 19:27:31 -04:00
Eric Sandeen 953e622b60 ext4: use atomic functions to set bh_state
Use the BUFFER_FNS functions (set_buffer_foo) to set buffer
head state atomically instead of nonatomic __set_bit().

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Jan Kara 47b4a50beb ext4: Set journal pointer to NULL when journal is released
Set sbi->s_journal to NULL after we call journal_destroy(). This
will be later needed because after journal_destroy() is called,
ext4_clear_inode() can still be called for some inodes (e.g. root
inode) and we'll need to detect there that journal doesn't exists
anymore.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Mingming Cao 0703143107 ext4: mballoc avoid use root reserved blocks for non root allocation
mballoc allocation missed check for blocks reserved for root users. Add
ext4_has_free_blocks() check before allocation. Also modified
ext4_has_free_blocks() to support multiple block allocation request.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Eric Sandeen d755fb3842 ext4: call blkdev_issue_flush on fsync
To ensure that bits are truly on-disk after an fsync,
we should call blkdev_issue_flush if barriers are supported.

Inspired by an old thread on barriers, by reiserfs & xfs
which do the same, and by a patch SuSE ships with their kernel

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Aneesh Kumar K.V 654b4908bc ext4: cleanup block allocator
Move the code related to block allocation to a single function and add helper
funtions to differient allocation for data and meta data blocks

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Aneesh Kumar K.V 7061eba75c ext4: Use inode preallocation with -o noextents
When mballoc is enabled, block allocation for old block-based
files are allocated using mballoc allocator instead of old
block-based allocator. The old ext3 block reservation is turned
off when mballoc is turned on.

However, the in-core preallocation is not enabled for block-based/
non-extent based file block allocation. This result in performance
regression, as now we don't have "reservation" ore in-core preallocation
to prevent interleaved fragmentation in multiple writes workload.

This patch fix this by enable per inode in-core preallocation
for non extent files when mballoc is used.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Akinobu Mita 6afd670713 ext4: fix ext4_init_block_bitmap() for metablock block group
When meta_bg feature is enabled and s_first_meta_bg != 0, 
ext4_init_block_bitmap() miscalculates the number of block used by
the group descriptor table (0 or 1 for metablock block group)

This patch fixes this by using ext4_bg_num_gdb()

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Stephen Tweedie <sct@redhat.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Andreas Dilger <adilger@sun.com>
2008-07-11 19:27:31 -04:00
Aneesh Kumar K.V 7477827f66 ext4: Fix sparse warning
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Li Zefan d9c769b769 ext4: cleanup never-used magic numbers from htree code
dx_root_limit() will had some dead code which forced it to always return
20, and dx_node_limit to always return 22 for debugging purposes.
Remove it.

Acked-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Shen Feng 9102e4fa80 ext4: Fix ext4_ext_journal_restart() to reflect errors up to the caller
Fix ext4_ext_journal_restart() so it returns any errors reported by 
ext4_journal_extend() and ext4_journal_restart().

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Shen Feng 1973adcba5 ext4: Make ext4_ext_find_extent fills ext_path completely
When pos=0 or depth, the fields of ext4_ext_path is are not
completely filled.  This patch also removes some unnecessary code.

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Shen Feng 787e0981fa ext4: return error when calling ext4_ext_split failed
ext4_ext_create_new_leaf must return error when its
calling to ext4_ext_split failed.

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Aneesh Kumar K.V a379cd1d6b ext4: Update i_disksize properly when allocating from fallocate area.
When allocating unitialized space at the end of file which had been
preallocated with the FALLOC_FL_KEEP_SIZE option, the file size is not
updated at that time.  But the later we are not updating the file size
when writing to that preallocated space.

These changes are for code correctness.  This patch allows us to update
the i_disksize at the write_end() callback of filesystem properly.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Shen Feng 363d4251d4 ext4: remove quota allocation when ext4_mb_new_blocks fails
Quota allocation is not removed when ext4_mb_new_blocks calls
kmem_cache_alloc failed.  Also make sure the allocation context is freed
on the error path.

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Li Zefan f9a8ac99fd ext4: remove redundant code in ext4_fill_super()
The previous sb_min_blocksize() has already set the block size.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Jose R. Santos 772cb7c83b ext4: New inode allocation for FLEX_BG meta-data groups.
This patch mostly controls the way inode are allocated in order to
make ialloc aware of flex_bg block group grouping.  It achieves this
by bypassing the Orlov allocator when block group meta-data are packed
toghether through mke2fs.  Since the impact on the block allocator is
minimal, this patch should have little or no effect on other block
allocation algorithms. By controlling the inode allocation, it can
basically control where the initial search for new block begins and
thus indirectly manipulate the block allocator.

This allocator favors data and meta-data locality so the disk will
gradually be filled from block group zero upward.  This helps improve
performance by reducing seek time.  Since the group of inode tables
within one flex_bg are treated as one giant inode table, uninitialized
block groups would not need to partially initialize as many inode
table as with Orlov which would help fsck time as the filesystem usage
goes up.

Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Valerie Clement <valerie.clement@bull.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Stoyan Gaydarov 4db9c54a53 ext4: replace __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__ instead

Signed-off-by: Stoyan Gaydarov <stoyboyker@gmail.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-07-13 21:03:29 -04:00
Shen Feng 7e5a8cdd84 ext4: fix error processing in mb_free_blocks
The error processing of the return value of mb_free_blocks is meanless
because it only returns 0.  This fix includes

- make mb_free_blocks return void

- remove the error processing part in callers

- unlock group before calling ext4_error in mb_free_blocks

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-07-13 21:03:31 -04:00
Shen Feng cfbe7e4f5e ext4: error proc entry creation when the fs/ext4 is not correctly created
When the directory fs/ext4 is not correctly created under proc, the entry
under this directory should not be created.

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-07-13 21:03:31 -04:00
Li Zefan f795e14073 ext4: fix build failure if DX_DEBUG is enabled
ext4_next_entry() is used by the debugging function dx_show_leaf(), so
it must be defined before that function.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Theodore Ts'o 7ad72ca60b ext4: Remove unused variable from ext4_show_options
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Theodore Ts'o 574ca174c9 ext4: Rename read_block_bitmap() to ext4_read_block_bitmap()
Since this a non-static function, make it be ext4 specific to avoid
conflicts with potentially other filesystems.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Shen Feng 3537576a70 ext4: remove double definitions of xattr macros
remove the definitions of macros XATTR_TRUSTED_PREFIX and XATTR_USER_PREFIX
since they are defined in linux/xattr.h

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Shen Feng 74767c5a2d ext4: miscellaneous error checks and coding cleanups for mballoc
ext4_mb_seq_history_open(): check if sbi->s_mb_history is NULL

ext4_mb_history_init(): replace kmalloc and memset with kzalloc

ext4_mb_init_backend(): remove memset since kzalloc is used

ext4_mb_init(): the return value of ext4_mb_init_backend is int,
	but i is unsigned, replace it with a new int variable.

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Shen Feng fdf6c7a768 ext4: add error processing when calling ext4_mb_init_cache in mballoc
Add error processing for ext4_mb_load_buddy when it calls
ext4_mb_init_cache.

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Reviewed-by:   Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Mingming Cao 31b481dc7c ext4: Fix ext4_mb_init_cache return error
ext4_mb_init_cache() incorrectly always return EIO on success. This
causes the caller of ext4_mb_init_cache() fail when it checks the return
value.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Shen Feng 69baee062a ext4: improve some code in rb tree part of dir.c
* remove unnecessary code in free_rb_tree_fname

* rename free_rb_tree_fname to ext4_htree_create_dir_info
  since it and ext4_htree_free_dir_info are a pair

* replace kmalloc with kzalloc in ext4_htree_free_dir_info

All these make the code more readable and simple.
PS: this patch is also suitable for ext3.

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Alexey Dobriyan 91d9982779 ext4: switch to seq_files
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-11 19:27:31 -04:00
Julia Lawall 07d45f1267 ext4: Use BUG_ON() instead of BUG()
if (...) BUG(); should be replaced with BUG_ON(...) when the test has no
side-effects to allow a definition of BUG_ON that drops the code completely.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@ disable unlikely @ expression E,f; @@

(
  if (<... f(...) ...>) { BUG(); }
|
- if (unlikely(E)) { BUG(); }
+ BUG_ON(E);
)

@@ expression E,f; @@

(
  if (<... f(...) ...>) { BUG(); }
|
- if (E) { BUG(); }
+ BUG_ON(E);
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Aneesh Kumar K.V ed8f9c751f ext4: start searching for the right extent from the goal group.
With mballoc we search for the best extent using different
criteria. We should always use the goal group when we are
starting with a new criteria.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Shen Feng 8a35694e11 ext4: fix comments to say "ext4"
Change second/third to fourth.

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Aneesh Kumar K.V e7dfb2463e ext4: Fix mb_find_next_bit not to return larger than max
Some architectures implement ext4_find_next_bit and
ext4_find_next_zero_bit in such a way that they return
greater than max for some input values. Make sure
mb_find_next_bit and mb_find_next_zero_bit return the
right values.

On 2.6.25 we have include/asm-x86/bitops_32.h
static inline unsigned find_first_bit(const unsigned long *addr, unsigned size)
{
	unsigned x = 0;

	while (x < size) {
		unsigned long val = *addr++;
		if (val)
			return __ffs(val) + x;
		x += (sizeof(*addr)<<3);
	}
	return x;
}

This can return value greater than size.

Reported and fixed here for lustre

https://bugzilla.lustre.org/show_bug.cgi?id=15932
https://bugzilla.lustre.org/attachment.cgi?id=17205

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Duane Griffin f3b35f063e ext4: validate directory entry data before use
ext4_dx_find_entry uses ext4_next_entry without verifying that the entry is
valid. If its rec_len == 0 this causes an infinite loop. Refactor the loop
to check the validity of entries before checking whether they match and
moving onto the next one.

There are other uses of ext4_next_entry in this file which also look
problematic. They should be reviewed and fixed if/when we have a test-case
that triggers them.

This patch fixes the first case (image hdb.25.softlockup.gz) reported in
http://bugzilla.kernel.org/show_bug.cgi?id=10882.

Signed-off-by: Duane Griffin <duaneg@dghda.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Duane Griffin 71dc8fbcf5 ext4: handle deleting corrupted indirect blocks
While freeing indirect blocks we attach a journal head to the parent buffer
head, free the blocks, then journal the parent. If the indirect block list
is corrupted and points to the parent the journal head will be detached
when the block is cleared, causing an OOPS.

Check for that explicitly and handle it gracefully.

This patch fixes the third case (image hdb.20000057.nullderef.gz)
reported in http://bugzilla.kernel.org/show_bug.cgi?id=10882.

Signed-off-by: Duane Griffin <duaneg@dghda.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Duane Griffin 91ef4caf80 ext4: handle corrupted orphan list at mount
If the orphan node list includes valid, untruncatable nodes with nlink > 0
the ext4_orphan_cleanup loop which attempts to delete them will not do so,
causing it to loop forever. Fix by checking for such nodes in the
ext4_orphan_get function.

This patch fixes the second case (image hdb.20000009.softlockup.gz)
reported in http://bugzilla.kernel.org/show_bug.cgi?id=10882.

Signed-off-by: Duane Griffin <duaneg@dghda.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Jan Kara 4d04e4fbf8 ext4: add missing unlock to an error path in ext4_quota_write()
When write in ext4_quota_write() fails, we have to properly release
i_mutex.  One error path has been missing the unlock...

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04 10:40:05 -07:00
Frederic Bohe 2856922c15 Ext4: Fix online resize block group descriptor corruption
This is the patch for the group descriptor table corruption during
online resize pointed out by Theodore Tso.  The problem was caused by
the fact that the ext4 group descriptor can be either 32 or 64 bytes
long.  Only the 64 bytes structure was taken into account.

Signed-off-by: Frederic Bohe <frederic.bohe@bull.net>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-06-20 11:48:48 -04:00
Eric Sandeen 571640cad3 ext4: enable barriers by default
I can't think of any valid reason for ext4 to not use barriers when
they are available;  I believe this is necessary for filesystem
integrity in the face of a volatile write cache on storage.

An administrator who trusts that the cache is sufficiently battery-
backed (and power supplies are sufficiently redundant, etc...)
can always turn it back off again.

SuSE has carried such a patch for ext3 for quite some time now.

Also document the mount option while we're at it.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-05-26 12:29:46 -04:00
Theodore Ts'o cd0b6a39a1 ext4: Display the journal_async_commit mount option in /proc/mounts
Cc: Andreas Dilger <adilger@clusterfs.com>
Cc: Girish Shilamkar <girish@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-05-26 10:28:28 -04:00
Theodore Ts'o 624080eded jbd2: If a journal checksum error is detected, propagate the error to ext4
If a journal checksum error is detected, the ext4 filesystem will call
ext4_error(), and the mount will either continue, become a read-only
mount, or cause a kernel panic based on the superblock flags
indicating the user's preference of what to do in case of filesystem
corruption being detected.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-06-06 17:50:40 -04:00
Josef Bacik 944600930a ext4: fix online resize bug
There is a bug when we are trying to verify that the reserve inode's
double indirect blocks point back to the primary gdt blocks.  The fix is
obvious, we need to mod the gdb count by the addr's per block.  This was
verified using the same testcase as with the ext3 equivalent of this
patch.

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-06-06 18:05:52 -04:00
Jose R. Santos 0bf7e8379c ext4: Fix uninit block group initialization with FLEX_BG
With FLEX_BG block bitmaps, inode bitmaps and inode tables _MAY_ be
allocated outside the group.  So, when initializing an uninitialized
block bitmap, we need to check the location of this blocks before
setting the corresponding bits in the block bitmap of the newly
initialized group.  Also return the right number of free blocks when
counting the available free blocks in uninit group.

Tested-by: Aneesh Kumar K.V <aneesh.kumar@inux.vnet.ibm.com>
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-06-03 14:07:29 -04:00
Aneesh Kumar K.V 03cddb80ed ext4: Fix use of uninitialized data with debug enabled.
Fix use of uninitialized data with debug enabled.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-06-05 20:59:29 -04:00
Aneesh Kumar K.V 519deca049 ext4: Retry block allocation if new blocks are allocated from system zone.
If the block allocator gets blocks out of system zone ext4 calls
ext4_error. But if the file system is mounted with errors=continue
retry block allocation. We need to mark the system zone blocks as
in use to make sure retry don't pick them again

System zone is the block range mapping block bitmap, inode bitmap and inode
table.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-05-15 14:43:20 -04:00
Valerie Clement 1930479c4b ext4: mballoc fix mb_normalize_request algorithm for 1KB block size filesystems
In case of inode preallocation, the number of blocks to allocate depends
on the file size and it is calculated in ext4_mb_normalize_request().
Each group in the filesystem is then checked to find one that can be
used for allocation; this is done in ext4_mb_good_group().

When a file bigger than 4MB is created, the requested number of blocks
to preallocate, calculated by ext4_mb_normalize_request is 4096.
However for a filesystem with 1KB block size, the maximum size of the
block buddies used by the multiblock allocator is 2048, so none of
groups in the filesystem satisfies the search criteria in
ext4_mb_good_group(). Scanning all the filesystem groups impacts
performance.

This was demonstrated by using a freshly created, 70GB, 1k block
filesystem, with caches dropped write before the test via
/proc/sys/vm/drop_caches, and with the filesystem mounted with
nodelalloc and nodealloc,nomballoc.  The time to write an 8 megabyte
file using "dd if=/dev/zero of=/mnt/test/fo bs=8k count=1k conv=fsync"
took 35.5091 seconds (236kB/s) with nodellaloc, and 0.233754 seconds
(35.9 MB/s) with the nodelloc,nomballoc options.  With a 1TB partition,
it took several minutes to write 8MB!

This patch modifies the algorithm in ext4_mb_normalize_group_request to
calculate the number of blocks to allocate by taking into account the
maximum size of free blocks chunks handled by the multiblock allocator.

It has also been tested for filesystems with 2KB and 4KB block sizes to
ensure that those cases don't regress.

Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Valerie Clement <valerie.clement@bull.net>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-05-13 19:31:14 -04:00
Jan Kara 2c8be6b222 ext4: fix typos in messages and comments (journalled -> journaled)
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-05-13 21:27:55 -04:00
Jan Kara 0623543b33 ext4: fix synchronization of quota files in journal=data mode
In journal=data mode, it is not enough to do write_inode_now as done in
vfs_quota_on() to write all data to their final location (which is
needed for quota_read to work correctly).  Calling journal_flush() does
its job.

Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-05-13 19:11:51 -04:00
Jan Kara cd59e7b978 ext4: Fix mount messages when quota disabled
When quota is disabled, we should not print 'journaled quota not
supported' when user tried to mount non-journaled quota. Also fix typo
in the message.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-05-13 19:11:51 -04:00
Jan Kara dfc5d03f12 ext4: correct mount option parsing to detect when quota options can be changed
We should not allow user to change quota mount options when quota is
just suspended.  It would make mount options and internal quota state
inconsistent.  Also we should not allow user to change quota format when
quota is turned on.  On the other hand we can just silently ignore when
some option is set to the value it already has (mount does this on
remount).

Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-05-13 19:11:51 -04:00
Tiger Yang 7e01c8e542 ext3/4: fix uninitialized bs in ext3/4_xattr_set_handle()
This fix the uninitialized bs when we try to replace a xattr entry in
ibody with the new value which require more than free space.

This situation only happens we format ext3/4 with inode size more than 128 and
we have put xattr entries both in ibody and block.  The consequences about
this bug is we will lost the xattr block which pointed by i_file_acl with all
xattr entires in it.  We will alloc a new xattr block and put that large value
entry in it.  The old xattr block will become orphan block.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Andreas Dilger <adilger@sun.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-14 19:11:14 -07:00
Jean Delvare f36f21ecca Fix misuses of bdevname()
bdevname() fills the buffer that it is given as a parameter, so calling
strcpy() or snprintf() on the returned value is redundant (and probably not
guaranteed to work - I don't think strcpy and snprintf support overlapping
buffers.)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-13 08:02:26 -07:00
Roel Kluin f1fa3342e2 ext4: fix hot spins in mballoc after err_freebuddy and err_freemeta
In ext4_mb_init_backend() 'i' is of type ext4_group_t. Since unsigned, i
>= 0 is always true, so fix hot spins after err_freebuddy: and -meta:
and prevent decrements when zero.

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 22:01:15 -04:00
Roel Kluin f8a87d8930 ext4: fix test ext_generic_write_end() copied return value
'copied' is unsigned, whereas 'ret2' is not. The test (copied < 0) fails

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 22:01:18 -04:00
Mingming Cao 8f6e39a7ad ext4: Move mballoc headers/structures to a seperate header file mballoc.h
Move function and structure definiations out of mballoc.c and put it under
a new header file mballoc.h

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 22:01:31 -04:00
Solofo Ramangalahy 60bd63d192 ext4: cleanup for compiling mballoc with verification and debugging #defines
This patch allows compiling mballoc with:
#define AGGRESSIVE_CHECK
#define DOUBLE_CHECK
#define MB_DEBUG

It fixes:
Compilation errors:
fs/ext4/mballoc.c: In function '__mb_check_buddy':
fs/ext4/mballoc.c:605: error: 'struct ext4_prealloc_space' has no member named 'group_list'
fs/ext4/mballoc.c:606: error: 'struct ext4_prealloc_space' has no member named 'pstart'
fs/ext4/mballoc.c:608: error: 'struct ext4_prealloc_space' has no member named 'len'

Compilation warnings:
fs/ext4/mballoc.c: In function 'ext4_mb_normalize_group_request':
fs/ext4/mballoc.c:2863: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'int'
fs/ext4/mballoc.c: In function 'ext4_mb_use_inode_pa':
fs/ext4/mballoc.c:3103: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'int'

Sparse check:
fs/ext4/mballoc.c:3818:2: warning: context imbalance in 'ext4_mb_show_ac' - different lock contexts for basic block

Signed-off-by: Solofo Ramangalahy <Solofo.Ramangalahy@bull.net>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 21:59:59 -04:00
Josef Bacik c19204b0ae ext4: don't use ext4_error in ext4_check_descriptors
Because ext4_check_descriptors is called at mount time you can't use ext4_error
as it calls ext4_commit_sb, which since the sb isn't all the way initialized
causes bad things to happen (ie a panic).  This patch changes the ext4_error's
to printk's to keep this problem from happening.  Thanks much,

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 22:00:28 -04:00
Aneesh Kumar K.V 8753e88f1b ext4: mark inode dirty after initializing the extent tree
We should mark the inode dirty only after initializing the extent
tree.  Also if we fail during extent initialization we need
to call DQUOT_FREE_INODE.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 22:00:36 -04:00
Solofo Ramangalahy ef7377289a ext4: update ctime and mtime for truncate with extents.
The recently announced "Linux POSIX file system test suite"
caught a truncate issue when using extents:
mtime and ctime are not updated when truncate is successful.

This is the single issue caught with "default" ext4 (mkfs and mount
with minimal options).
The testsuite does not report failure with -o noextents.

With the following patch, all tests of the testsuite pass.

Signed-off-by: Solofo Ramangalahy <Solofo.Ramangalahy@bull.net>
Signed-off-by: Mingming Cao <cmm@us.ibm.com> 
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 22:00:41 -04:00
Aneesh Kumar K.V c83617db76 ext4: Don't do GFP_NOFS allocations after taking ext4_lock_group
We can't do GFP_NOFS allocation after taking ext4_lock_group

BUG: sleeping function called from invalid context at mm/slab.c:3054
in_atomic():1, irqs_disabled():0
1 lock held by vi/2426:
#0:  (&ei->i_data_sem){----}, at: [<c01cf665>] ext4_release_file+0x23/0x66
Pid: 2426, comm: vi Not tainted 2.6.25-rc7 #24
[<c011a3dc>] __might_sleep+0xbe/0xc5
[<c01620c9>] kmem_cache_alloc+0x22/0xa6
[<c01e382a>] ext4_mb_release_inode_pa+0x73/0x1b3
[<c01e6adf>] ext4_mb_discard_inode_preallocations+0x22d/0x2d4
[<c013000a>] ? param_set_ushort+0x32/0x39
[<c01ceba1>] ext4_discard_reservation+0x27/0x6a
[<c01cf66c>] ext4_release_file+0x2a/0x66
[<c0165bd6>] __fput+0xae/0x155
[<c0165e46>] fput+0x17/0x19
[<c0163756>] filp_close+0x50/0x5a
[<c01647c0>] sys_close+0x71/0xad
[<c0104aba>] sysenter_past_esp+0x5f/0xa5

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 22:00:47 -04:00
Christoph Hellwig 3dcf54515a ext4: move headers out of include/linux
Move ext4 headers out of include/linux.  This is just the trivial move,
there's some more thing that could be done later. 

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 18:13:32 -04:00
Josef Bacik 216553c4b7 ext4: fix wrong gfp type under transaction
This fixes the allocations with GFP_KERNEL while under a transaction problems
in ext4.  This patch is the same as its ext3 counterpart, just switches these
to GFP_NOFS.

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 22:02:02 -04:00
Jan Kara 2887df139c ext4: Fix hang on umount with quotas when journal is aborted
Call dquot_drop() from ext4_dquot_drop() even if we fail to start a
transaction. Otherwise we never get to dropping references to quota structures
from the inode and umount will hang indefinitely.  Thanks to Payphone LIOU for
spotting the problem.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
CC: Payphone LIOU <lioupayphone@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 22:02:07 -04:00
Jan Kara 53b7e9f680 ext4: Fix update of mtime and ctime on rename
The patch below makes ext4 update mtime and ctime of the directory
into which we move file even if the directory entry already exists.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 22:02:11 -04:00
Harvey Harrison 46e665e9d2 ext4: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17 10:38:59 -04:00
Mingming Cao d3a95d477d ext4: make ext4_xattr_list() static
This patch makes the needlessly global ext4_xattr_list() static.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17 10:38:59 -04:00
Mingming Cao 14499f3592 ext4: remove extra define of ext4_new_blocks_old from mballoc.c
The function prototype of ext4_new_blocks_old() is defined in ext4_fs.h,
so we don't need the extra function prototype in mballoc.c

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17 10:38:59 -04:00
Akinobu Mita a871611b47 ext4: check ext4_journal_get_write_access() errors
Check ext4_journal_get_write_access() errors.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: adilger@clusterfs.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mingming Cao <cmm@us.ibm.com>
2008-04-17 10:38:59 -04:00
Akinobu Mita c0a4ef38ac ext4: use ext4_get_group_desc()
Use ext4_get_group_desc() in ext4_get_inode_block() instead of open
coding the functionality.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: adilger@clusterfs.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mingming Cao <cmm@us.ibm.com>
2008-04-17 10:38:59 -04:00
Akinobu Mita d00a6d7b40 ext4: use ext4_group_first_block_no()
Use ext4_group_first_block_no() and assign the return values to
ext4_fsblk_t variables.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: adilger@clusterfs.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mingming Cao <cmm@us.ibm.com>
2008-04-17 10:38:59 -04:00
Marcin Slusarz 216c34b2b8 ext4: convert byte order of constant instead of variable
Convert byte order of constant instead of variable which can be done at
compile time (vs run time).

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17 10:38:59 -04:00
Marcin Slusarz e8546d0615 ext4: le*_add_cpu conversion
replace all:
little_endian_variable = cpu_to_leX(leX_to_cpu(little_endian_variable) +
					expression_in_cpu_byteorder);
with:
	leX_add_cpu(&little_endian_variable, expression_in_cpu_byteorder);
generated with semantic patch

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: linux-ext4@vger.kernel.org
Cc: sct@redhat.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: adilger@clusterfs.com
Cc: Mingming Cao <cmm@us.ibm.com>
2008-04-17 10:38:59 -04:00
Aneesh Kumar K.V 9a0762c5af ext4: Convert list_for_each_rcu() to list_for_each_entry_rcu()
The list_for_each_entry_rcu() primitive should be used instead of
list_for_each_rcu(), as the former is easier to use and provides
better type safety.

http://groups.google.com/group/linux.kernel/browse_thread/thread/45749c83451cebeb/0633a65759ce7713?lnk=raot

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17 10:38:59 -04:00
Eric Sandeen 4ddfef7b41 ext4: reduce mballoc stack usage with noinline_for_stack
mballoc.c is a whole lot of static functions, which gcc seems to
really like to inline.

With the changes below, on x86, I can at least get from:

432 ext4_mb_new_blocks
240 ext4_mb_free_blocks
208 ext4_mb_discard_group_preallocations
188 ext4_mb_seq_groups_show
164 ext4_mb_init_cache
152 ext4_mb_release_inode_pa
136 ext4_mb_seq_history_show
...

to

220 ext4_mb_free_blocks
188 ext4_mb_seq_groups_show
176 ext4_mb_regular_allocator
164 ext4_mb_init_cache
156 ext4_mb_new_blocks
152 ext4_mb_release_inode_pa
136 ext4_mb_seq_history_show
124 ext4_mb_release_group_pa
...

which still has some big functions in there, but not 432 bytes!

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 08:11:12 -04:00
Andi Kleen 5cdd7b2d77 Convert ext4 to use unlocked_ioctl
I checked ext4_ioctl and it looked largely safe to not be used
without BKL.  So convert it over to unlocked_ioctl.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-04-29 22:03:54 -04:00
Aneesh Kumar K.V 161e7b7c1d ext4: Cache the correct extent length for uninit extents
When we convert an uninitialized extent to an initialized extent
we need to make sure we return the number of blocks in the
extent from the file system block corresponding to logical
file block.  Otherwise we cache wrong extent details and this
results in file system corruption.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 22:03:59 -04:00
Aneesh Kumar K.V 1a89734d40 ext4: Return unwritten buffer head when trying to read from prealloc space.
ext4_ext_get_blocks() returns the number of blocks allocated with buffer
head unmapped for a read from prealloc space.  This is needed so that
delayed allocation doesn't do block reservation for prealloc space
since the blocks are already reserved on disk.  Mark the buffer head
unwritten.  Some code paths try to read the block if the buffer_head is
not new and no uptodate.  Marking the buffer head unwritten avoids this
reading.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 08:11:12 -04:00
Aneesh Kumar K.V e067ba0078 ext4: make ext4_ext_get_blocks always return <= max_blocks
ext4_ext_get_blocks() returns number of blocks allocated with buffer
heads unmapped for a read from prealloc space.  This is needed so that
delayed allocation doesn't do block reservation for prealloc space since
the blocks are already resevred on disk.  Fix ext4_ext_get_blocks to not
return greater than max_blocks, since some of the code paths cannot
handle such a return value.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 08:11:12 -04:00
Aneesh Kumar K.V fd28784adc ext4: Fix fallocate to update the file size in each transaction
ext4_fallocate needs to update file size in each transaction.  Otherwise
if we crash the file size won't be seen.  We were also not marking
the inode dirty after updating file size before.  Also when we try to
retry allocation due to ENOSPC, make sure we reset the variable ret so
that we actually do a retry.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 08:11:12 -04:00
Aneesh Kumar K.V 267e4db9ac ext4: Fix race between migration and mmap write
Fail migrate if we allocated new blocks via mmap write.

If we write to holes in the file via mmap, we end up allocating
new blocks. This block allocation happens without taking inode->i_mutex.
Since migrate is protected by i_mutex and migrate expects that no
new blocks get allocated during migrate, fail migrate if new blocks
get allocated.

We can't take inode->i_mutex in the mmap write path because that
would result in a locking order violation between i_mutex and mmap_sem.
Also adding a separate rw_sempahore for protection is really high overhead
for a rare operation such as migrate.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 08:11:12 -04:00
Aneesh Kumar K.V 3977c965ec ext4: zero out small extents when writing to prealloc area.
If the preallocated area is small zero out the full extent
instead of splitting them. This should avoid the "write
every alternate block" problem that could grow the number
of extents dramatically.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17 10:38:59 -04:00
Aneesh Kumar K.V 093a088b76 ext4: ENOSPC error handling for writing to an uninitialized extent
This patch handles possible ENOSPC errors when writing to an
uninitialized extent in case the filesystem is full.

A write to a prealloc area causes the split of an unititalized extent
into initialized and uninitialized extents.  If we don't have
space to add new extent information, instead of returning error,
convert the existing uninitialized extent to initialized one.  We
need to zero out the blocks corresponding to the entire extent to
prevent uninitialized data reaching userspace.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 08:11:12 -04:00
Aneesh Kumar K.V e65187e6d0 ext4: Enable extent format for symlinks.
This patch enables extent-formatted normal symlinks.  Using extents
format allows a symlink to refer to a block number larger than 2^32
on large filesystems.  We still don't enable extent format for fast
symlinks, which are contained in the inode itself.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 08:11:12 -04:00
Aneesh Kumar K.V 95c3889cb8 ext4: Fix fallocate error path
Put the old extent details back if we fail to split the
uninitialized extent.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17 10:38:59 -04:00
Josef Bacik f3f12faa74 ext4: fix mount option parsing
The "resize" option won't be noticed as it comes after the NULL option,
so if you try to mount (or in this case remount) with that option it
won't be recognized.

Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 22:05:28 -04:00
Hisashi Hifumi 53c550e975 ext4: fdatasync should skip metadata writeout when overwriting
Currently fdatasync is identical to fsync in ext3.

I think fdatasync should skip journal flush in data=ordered and
data=writeback mode when it overwrites to already-instantiated blocks on
HDD.  When I_DIRTY_DATASYNC flag is not set, fdatasync should skip journal
writeout because this indicates only atime or/and mtime updates.

Following patch is the same approach of ext2's fsync code(ext2_sync_file).

I did a performance test using the sysbench.

#sysbench --num-threads=128 --max-requests=50000 --test=fileio --file-total-size=128G
--file-test-mode=rndwr --file-fsync-mode=fdatasync run

The result on ext3 was:

	-2.6.24
	Operations performed:  0 Read, 50080 Write, 59600 Other = 109680 Total
	Read 0b  Written 782.5Mb  Total transferred 782.5Mb  (12.116Mb/sec)
	  775.45 Requests/sec executed

	Test execution summary:
	    total time:                          64.5814s
	    total number of events:              50080
	    total time taken by event execution: 3713.9836
	    per-request statistics:
	         min:                            0.0000s
	         avg:                            0.0742s
	         max:                            0.9375s
	         approx.  95 percentile:         0.2901s

	Threads fairness:
	    events (avg/stddev):           391.2500/23.26
	    execution time (avg/stddev):   29.0155/1.99

	-2.6.24-patched
	Operations performed:  0 Read, 50009 Write, 61596 Other = 111605 Total
	Read 0b  Written 781.39Mb  Total transferred 781.39Mb  (16.419Mb/sec)
	1050.83 Requests/sec executed

	Test execution summary:
	    total time:                          47.5900s
	    total number of events:              50009
	    total time taken by event execution: 2934.5768
	    per-request statistics:
 	         min:                            0.0000s
	         avg:                            0.0587s
 	         max:                            0.8938s
	         approx.  95 percentile:         0.1993s

	Threads fairness:
	    events (avg/stddev):           390.6953/22.64
	    execution time (avg/stddev):   22.9264/1.17

Filesystem I/O throughput was improved.

Signed-off-by :Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Acked-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17 10:38:59 -04:00
Josef Bacik 97bd42b9c8 ext4: check return of ext4_orphan_get properly
This patch fix a panic while running fsfuzzer. 
We are improperly checking the return of ext4_orphan_get.

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 22:04:56 -04:00
Denis V. Lunev 46fe74f2ae ext4: use non-racy method for proc entries creation
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data
be setup before gluing PDE to main tree.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: <linux-ext4@vger.kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:20 -07:00
Alexey Dobriyan 36a5aeb878 proc: remove proc_root_fs
Use creation by full path instead: "fs/foo".

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:18 -07:00
Jan Kara 6f28e08794 quota: ext4: make ext4 handle quotaon on remount
Update ext4 to handle quotaon on remount RW.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:33 -07:00
Linus Torvalds e9b62693ae Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/juhl/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/juhl/trivial: (24 commits)
  DOC:  A couple corrections and clarifications in USB doc.
  Generate a slightly more informative error msg for bad HZ
  fix typo "is" -> "if" in Makefile
  ext*: spelling fix prefered -> preferred
  DOCUMENTATION:  Use newer DEFINE_SPINLOCK macro in docs.
  KEYS:  Fix the comment to match the file name in rxrpc-type.h.
  RAID: remove trailing space from printk line
  DMA engine: typo fixes
  Remove unused MAX_NODES_SHIFT
  MAINTAINERS: Clarify access to OCFS2 development mailing list.
  V4L: Storage class should be before const qualifier (sn9c102)
  V4L: Storage class should be before const qualifier
  sonypi: Storage class should be before const qualifier
  intel_menlow: Storage class should be before const qualifier
  DVB: Storage class should be before const qualifier
  arm: Storage class should be before const qualifier
  ALSA: Storage class should be before const qualifier
  acpi: Storage class should be before const qualifier
  firmware_sample_driver.c: fix coding style
  MAINTAINERS: Add ati_remote2 driver
  ...

Fixed up trivial conflicts in firmware_sample_driver.c
2008-04-21 16:36:46 -07:00
Benoit Boissinot 1cc8dcf569 ext*: spelling fix prefered -> preferred
Spelling fix: prefered -> preferred

Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org>
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
2008-04-21 22:45:55 +00:00
Dave Hansen 42a74f206b [PATCH] r/o bind mounts: elevate write count for ioctls()
Some ioctl()s can cause writes to the filesystem.  Take these, and make them
use mnt_want/drop_write() instead.

[AV: updated]

Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-19 00:29:24 -04:00
Jan Kara 335e92e8a5 vfs: fix possible deadlock in ext2, ext3, ext4 when using xattrs
mb_cache_entry_alloc() was allocating cache entries with GFP_KERNEL.  But
filesystems are calling this function while holding xattr_sem so possible
recursion into the fs violates locking ordering of xattr_sem and transaction
start / i_mutex for ext2-4.  Change mb_cache_entry_alloc() so that filesystems
can specify desired gfp mask and use GFP_NOFS from all of them.

Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Dave Jones <davej@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-15 19:35:41 -07:00
Akinobu Mita 5606bf5d0c ext4: add missing ext4_journal_stop()
Add missing ext4_journal_stop() in error handling.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: adilger@clusterfs.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mingming Cao <cmm@us.ibm.com>
2008-02-25 15:37:42 -05:00
Aneesh Kumar K.V ffad0a44b7 ext4: ext4_find_next_zero_bit needs an aligned address on some arch
ext4_find_next_zero_bit and ext4_find_next_bit needs a long aligned
address on x8_64. Add mb_find_next_zero_bit and mb_find_next_bit
and use them in the mballoc.

Fix: https://bugzilla.redhat.com/show_bug.cgi?id=433286

Eric Sandeen debugged the problem and suggested the fix.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by:      Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-02-23 01:38:34 -05:00
Aneesh Kumar K.V 42bf0383d1 ext4: set EXT4_EXTENTS_FL only for directory and regular files
In addition, don't inherit EXT4_EXTENTS_FL from parent directory.
If we have a directory with extent flag set and later mount the file
system with -o noextents, the files created in that directory will also
have extent flag set but we would not have called ext4_ext_tree_init for
them. This will cause error later when we are verifying the extent header

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-02-25 16:38:03 -05:00
Aneesh Kumar K.V 2c98615d3b ext4: Don't mark filesystem error if fallocate fails
If we fail to allocate blocks don't call ext4_error. Also don't hide
errors from ext4_get_blocks_wrap

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-02-25 15:41:35 -05:00
Mingming Cao f5ab0d1f8f ext4: Fix BUG when writing to an unitialized extent
This patch fixes a bug when writing to preallocated but uninitialized
blocks, which resulted in a BUG in fs/buffer.c saying that the buffer
is not mapped.

When writing to a file, ext4_get_block_wrap() is called with create=1 in
order to request that blocks be allocated if necessary.  It currently
calls ext4_get_blocks() with create=0 in order to do a lookup first.  If
the inode contains an unitialized data block, the buffer head is left
unampped, which ext4_get_blocks_wrap() returns, causing the BUG.

We fix this by checking to see if the buffer head is unmapped, and if
so, we make sure the the buffer head is mapped by calling
ext4_ext_get_blocks with create=1.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-02-25 15:29:55 -05:00