Fixes audio output on a ThinkPad X260, when using Lenovo CES 2013
docking station series (basic, pro, ultra).
Signed-off-by: Conrad Kostecki <ck+linuxkernel@bl4ckb0x.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
au88x0 hardware seems returning the current pointer at the buffer
boundary instead of going back to zero. This results in spewing
warnings from PCM core.
This patch corrects the return value from the pointer callback within
the proper value range, just returning zero if the position is equal
or above the buffer size.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit [9bef72bdb26e: ALSA: pcxhr: Use nonatomic PCM ops]
converted to non-atomic PCM ops, but shamelessly with an unbalanced
mutex locking, which leads to the hangup easily. Fix it.
Fixes: 9bef72bdb2 ('ALSA: pcxhr: Use nonatomic PCM ops')
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116441
Cc: <stable@vger.kernel.org> # 3.18+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add HD Audio Device PCI ID for the Intel Broxton-T platform.
It is an HDA Intel PCH controller.
Signed-off-by: Lu, Han <han.lu@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although one weird behavior about the input path (inconsistent D0/D3
switch) on Cirrus CS420x codecs was fixed in the previous commit,
there is still an issue on some Mac machines: the capture stream
stalls when switching the ADCs on the fly. More badly, this keeps
stuck until the next reboot.
The dynamic ADC switching is already a bit fragile and assuming
optimistically that the chip accepts the frequent power changes. On
Cirrus codecs, this doesn't seem applicable.
As a quick workaround, we pin down the ADCs to keep up in D0 when
spec->dyn_adc_switch is set. In this way, the ADCs are kept up only
for the system that were confirmed to be broken.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116171
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The "Line In->Rear Out Switch" control on ens1371 driver returns a
bogus value, always true, as its check is totally broken. Fix it to
check the proper GPIO bit mask.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Optiplex 9020m with Haswell-DT processor needs a quirk for the
headset jack at the front of the machine to be able to use microphones.
A quirk for this model was originally added in 3127899, but c77900e
removed it in favour of a more generic version.
Unfortunately, pin configurations can changed based on firmware/BIOS
versions, and the generic version doesn't have any effect on newer
versions of the machine/firmware anymore.
With help from David Henningsson <diwic@ubuntu.com>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Tested-by: Bastien Nocera <hadess@hadess.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make sure per_pin is not NULL before using it.
Fixes: 9b3dc8aa3f ('ALSA: hda - Register chmap obj as priv data instead of codec')
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We've got a regression report that the recording on Mac with a cirrus
codec doesn't work any longer. This turned out to be the missing
power up to D0 by power_save_node enablement.
After analyzing the traces, we found out that the culprit is that the
codec advertises the "actual" power state of a few nodes to be D0
while the "target" power state is D3. This inconsistency is usually
OK, as it implies the power transition. But in the case of cirrus
codec, this seems to be stuck to D3 while it's not actually D0.
This patch addresses the issue by checking the power state difference
more strictly. It sends the power-state change verb unless both the
target and the actual power states show the given value.
We may introduce yet another flag indicating the possible broken
hardware power state, but it's anyway safer to set the proper power
state even in a transition (at least it's harmless as long as the
target state is same). So this simpler change was applied now.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116171
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
lx_pipe_state() checks the return value from lx_message_send_atomic()
and breaks the loop only when it's a negative value. However,
lx_message_send_atomic() may return a positive error code (as the
return code from the hardware), and then lx_pipe_state() tries to
compare the uninitialized current_state variable.
Fix this behavior by checking the positive non-zero error code as
well.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While the previous commit fixed the missing monitor_present flag
update, it may be still in an inconsistent state while the driver
repolls: the flag itself is updated, but the eld_valid flag and the
contents don't follow until the repoll finishes (and may be repeated
for a few times).
The basic problem is that pin_eld->monitor_present is updated in the
caller side. This should have been updated only in update_eld(). So,
the proper fix is to avoid accessing pin_eld but only spec->temp_eld.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit [bd48128539ab: ALSA: hda - Fix forgotten HDMI
monitor_present update] covered the missing update of monitor_present
flag, but this caused a regression for devices without the i915 eld
notifier. Since the old code supposed that pin_eld->monitor_present
was updated by the caller side, the hdmi_present_sense_via_verbs()
doesn't update the temporary eld->monitor_present but only
pin_eld->monitor_present, which is now overridden in update_eld().
The fix is to update pin_eld->monitor_present as well before calling
update_eld().
Note that this may still leave monitor_present flag in an inconsistent
state when the driver repolls, but this is at least the old behavior.
More proper fix will follow in the later patch.
Fixes: bd48128539 ('ALSA: hda - Fix forgotten HDMI monitor_present update')
Signed-off-by: Hyungwon Hwang <hyungwon.hwang7@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The calls for capture_hook were missing in dyn_adc_capture_pcm_prepare
and cleanup callbacks. Luckily there are no users of the capture
hooks with dyn-adc PCM, so far, thus this doesn't change the behavior
of existing devices, but it's a fix for a future usage.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Lenovo Thinkpad T460s requires the alc_fixup_tpt440_dock as well in
order to get working sound output on the docking stations headphone jack.
Patch tested on a Thinkpad T460s (20F9CT01WW) using a ThinkPad Ultradock
on kernel 4.4.6.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ct_timer_ops structures are never modified, so declare them as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
acpi_dev_present() was originally named after pci_dev_present()
to signify the similarity of the two functions.
However Rafael J. Wysocki pointed out that the exported function
acpi_dev_present() is easily confused with the non-exported
acpi_device_is_present(). Additionally in ACPI parlance the term
"present" usually refers to the "device is present" bit returned
by the _STA control method, yet acpi_dev_present() merely checks
presence in the namespace. It does not invoke _STA at all, let
alone check the "device is present" bit.
As suggested by Rafael, rename the function to acpi_dev_found()
and adjust all existing call sites.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
intel8x0 driver has the inside_vm check for skipping a buggy hardware
workaround in the PCM pointer callback in the commit [228cf79376f1:
ALSA: intel8x0: Improve performance in virtual environment]. This was
originally applied to all devices on known VMs, but the code was
switched to use the PCI ID matching for applying to only known
devices (KVM and Parallels), in order to avoid applying wrongly to
VT-d and other such cases, in the commit [7fb4f392bd27: ALSA:
intel8x0: improve virtual environment detection].
Meanwhile, the original VM check was kept even after switching to the
PCI ID matching. It was partly because we weren't 100% sure whether
we had covered all well, and partly because this would help
identifying the issue once when a user of another VM hit the same
problem or a regression. Currently the VM check is used only for
showing the kernel message that the VM-optimization isn't applied, and
the VM check itself doesn't change the actual driver behavior at all.
Despite the relatively safe driver behavior, the code caught attention
of developers badly and brought many confusion / misunderstanding.
Since we've got neither regression nor enhancement report for other
VMs for five years long, it's likely safe to drop this superfluous VM
check now.
The module option is still kept, so if a user still needs to adjust,
it can be applied as was.
Acked-by: Konstantin Ozerkov <kozerkov@parallels.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The existing TLV callback implementation copies all of the
cea_channel_speaker_allocation map table to the TLV container
irrespective of what is reported by sink. This is of little use
to the userspace application.
With this patch, it parses the spk_alloc block as queried from
the ELD, and copies only the corresponding mapping channel
allocation entries from the cea channel speaker allocation table.
Thus the user can parse the TLV container to identify sink's
capability and set the channel map accordingly.
It shouldn't impact the behavior in AMD chipset, as this makes
use of already parsed spk alloc block to calculate the channel
map.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A collection of small fixes:
- A fix in ALSA timer core to avoid possible BUG() trigger
- A fix in ALSA timer core 32bit compat layer
- A few HD-audio quirks for ASUS and HP machines
- AMD HD-audio HDMI controller quirks
- Fixes of USB-audio double-free at some error paths
- A fix for memory leak in DICE driver at hotunplug
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=9ORd
-----END PGP SIGNATURE-----
Merge tag 'sound-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes:
- a fix in ALSA timer core to avoid possible BUG() trigger
- a fix in ALSA timer core 32bit compat layer
- a few HD-audio quirks for ASUS and HP machines
- AMD HD-audio HDMI controller quirks
- fixes of USB-audio double-free at some error paths
- a fix for memory leak in DICE driver at hotunplug"
* tag 'sound-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: timer: Use mod_timer() for rearming the system timer
ALSA: hda - fix front mic problem for a HP desktop
ALSA: usb-audio: Fix double-free in error paths after snd_usb_add_audio_stream() call
ALSA: hda: add AMD Polaris-10/11 AZ PCI IDs with proper driver caps
ALSA: dice: fix memory leak when unplugging
ALSA: hda - Apply fix for white noise on Asus N550JV, too
ALSA: hda - Fix white noise on Asus N750JV headphone
ALSA: hda - Asus N750JV external subwoofer fixup
ALSA: timer: fix gparams ioctl compatibility for different architectures
The front mic jack (pink color) can't detect any plug or unplug. After
applying this fix, both detecting function and recording function
work well.
BugLink: https://bugs.launchpad.net/bugs/1564712
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit fixes garbled audio on Polaris-10/11 variants
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since we have the fixed pin-port mapping for Intel IronLake (IbexPeak)
and Baytrail (ValleyView) platforms in the code side, now it's time to
add the support in the codec driver side. This patch simply enables
the i915 ELD notifier for these in addition with the fix of the
mapping from the port to NID in the callback.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Intel IronLake and ValleyView platforms have different HDMI widget pin
and digital port mapping from other newer ones. The recent ones
(HSW+) have NID 0x05 to 0x07 for port B to port D, while these chips
have NID 0x04 to 0x06.
For adapting this mapping, pass the codec object instead of the bus
object to snd_hdac_sync_audio_rate() and snd_hdac_acomp_get_eld() so
that they can check the codec ID and calculate the mapping properly.
The changes in the HDMI codec driver side will follow in the later
patch.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Intel SandyBridge and IvyBridge (CougarPoint and PantherPoint
platforms) have also the same digital port vs audio widget mapping
(from port B = NID 0x05 to port D = NID 0x07) as Haswell & co.
So, we can reuse the existing functions for HSW+ for these platforms
without changing there, but just by re-adding the on-demand i915
binding in HDMI codec driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For reducing the splat of is_haswell_plus() or such macros, this patch
introduces pin_cvt_fixup() ops to hdmi_spec. For HSW+ and VLV+
codecs, set this ops so that the driver can call the Intel-specific
workarounds appropriately.
A gratis bonus that we can remove the mux_id argument from
hdmi_choose_cvt(), too, since the fixup function always refers the
mux_idx from the given per_pin object.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of checking at each time with is_haswell_plus() macro,
override the setup_stream ops itself for HSW+ chips.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The need for reprogramming the AMP mute bit at each audio info frame
setup isn't always specific to Intel chips. It's safer to set it
generically for all codecs with the amp bit, as this verb execution
itself isn't too much load. This eliminates one usage of
is_haswell_plus() macro, after all.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have too many Intel-specific codes in patch_hdmi_generic() despite
its function name. And this makes it difficult to adjust per chipset,
e.g. for allowing the audio notifier on an old chipset, one would need
to add an explicit if() check.
This patch attempts some code refactoring and cleanups in this regard;
the Intel-specific codes are moved out of patch_generic_hdmi() into
the new functions, patch_i915_hsw_hdmi() and patch_i915_byt_hdmi(),
depending on the chipset. The other old Intel chipsets keep using
patch_generic_hdmi() without Intel hacks. The existing
patch_generic_hdmi() is also split to a few components so that they
can be called from the Intel codec parsers.
There are still many is_haswell*() and is_valleyview*() macro usages
in the code. They will be cleaned up later. For the time being, only
the entry are concerned.
Along with this change, the i915_bound flag and the on-demand i915
component binding have been removed as a cleanup, since there is no
user at this moment. This will be added back later once when Cougar
Point and else start using the i915 eld notifier.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply the new fixup that is used for ASUS N750JV to another similar
model, N500JV, too, for reducing the headphone noise.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115181
Signed-off-by: Bobi Mihalca <bobbymihalca@touchtech.ro>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For reducing the noise from the headphone output on ASUS N750JV,
call the existing fixup, alc_fixup_auto_mute_via_amp(), additionally.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115181
Signed-off-by: Bobi Mihalca <bobbymihalca@touchtech.ro>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASUS N750JV needs the same fixup as N550 for enabling its subwoofer.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115181
Signed-off-by: Bobi Mihalca <bobbymihalca@touchtech.ro>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The previous pull request introduced a few WARN_ON() for Intel
HD-audio HDMI. Indeed it caught bugs, and now users get annoyed.
So this request came up: a collection of small fixes to paper over
the inconsistencies on (mostly) old Intel chipsets.
In addition, a trivial USB-audio quirk is included, too.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=ac9g
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The previous pull request introduced a few WARN_ON() for Intel
HD-audio HDMI. Indeed it caught bugs, and now users get annoyed. So
this request came up: a collection of small fixes to paper over the
inconsistencies on (mostly) old Intel chipsets.
In addition, a trivial USB-audio quirk is included, too"
* tag 'sound-fix-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix missing ELD update at unplugging
ALSA: usb-audio: add Microsoft HD-5001 to quirks
ALSA: hda - Workaround for unbalanced i915 power refcount by concurrent probe
ALSA: hda - Fix spurious kernel WARNING on Baytrail HDMI
ALSA: hda - Fix forgotten HDMI monitor_present update
ALSA: hda - Really restrict i915 notifier to HSW+
i915 get_eld ops may return an error when no encoder is connected, and
currently we regard the error as fatal and skip the whole ELD
handling. This ended up with the missing ELD update at unplugging.
This patch fixes the issue by treating the error as the unplugged
state, instead of skipping the rest.
Reported-by: Libin Yang <libin.yang@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.5
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent addition of on-demand i915 audio component binding in the
codec driver seems leading to the unbalanced i915 power refcount,
according to Intel CI tests. Typically, it gets a kernel WARNING
like:
WARNING: CPU: 3 PID: 173 at sound/hda/hdac_i915.c:91 snd_hdac_display_power+0xf1/0x110 [snd_hda_core]()
Call Trace:
[<ffffffff813fef15>] dump_stack+0x67/0x92
[<ffffffff81078a21>] warn_slowpath_common+0x81/0xc0
[<ffffffff81078b15>] warn_slowpath_null+0x15/0x20
[<ffffffffa00f77e1>] snd_hdac_display_power+0xf1/0x110 [snd_hda_core]
[<ffffffffa015039d>] azx_intel_link_power+0xd/0x10 [snd_hda_intel]
[<ffffffffa011e32a>] azx_link_power+0x1a/0x30 [snd_hda_codec]
[<ffffffffa00f21f9>] snd_hdac_link_power+0x29/0x40 [snd_hda_core]
[<ffffffffa01192a6>] hda_codec_runtime_suspend+0x76/0xa0 [snd_hda_codec]
.....
The scenario is like below:
- HD-audio driver and i915 driver are probed concurrently at the
(almost) same time; HDA bus tries to bind with i915, but it fails
because i915 initialization is still being processed.
- Later on, HD-audio probes the HDMI codec, where it again tries to
bind with i915. At this time, it succeeds.
- At finishing the probe of HDA, it decreases the refcount as if it
were already bound at the bus probe, since the component is bound
now. This triggers a kernel WARNING due to the unbalance.
As a workaround, in this patch, we just disable the on-demand i915
component binding in the codec driver. This essentially reverts back
to the state of 4.4 kernel.
We know that this is no real solution, but it's a minimalistic simple
change that can be applied to 4.5.x kernel as stable.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94566
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.5
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_hdac_sync_audio_rate() call is mandatory only for HSW and later
models, but we call the function unconditionally blindly assuming that
the function doesn't do anything harmful. But since recently, the
function checks the validity of the passed pin NID, and eventually
spews the warning if an unexpected pin is passed. This is seen on old
chips like Baytrail.
The fix is to limit the call of this function again only for the chips
with the proper binding. This can be identified by the same flag as
the eld notifier.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.5
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After a heavy storm by syzkaller in 4.5 cycle, we have relatively few
changes in the core at this time while a lot of changes are found in
the driver side, unsurprisingly. Below are some highlights:
ALSA core:
- A few more hardening in ALSA timer codes
- An extension of sequencer API for advertising the card / pid
- Small fixes in compress-offload and jack layers
HD-audio:
- Dynamic PCM assignment in HDMI/DP codec; preparation for upcoming
DP-MST support
- Lots of code refactoring for sharing with ASoC SKL driver
- Regression fixes for Intel HDMI/DP
- Fixups for CX20724 codec, Lenovo AiO
USB-audio:
- Add quirk_alias option to make quirk debugging easier
- Fixes for possible Oops by malformed firmware
Firewire:
- Add support for FW-1804 in tascam driver
- Improvements / changes in card registration, multi stream handling,
etc for DICE
- Lots of code refactoring
ASoC:
- Enhancements of still ongoing topology API
- Lots of commits for Intel Skylake support including HDMI support
- A few Intel Atom driver updates for recent devices
- Lots of improvements to the Renesas drivers
- Capture support for Qualcomm drivers
- Support for TI DaVinci DRA7xxx devices
- New machine drivers for Freescale systems with Cirrus CODECs,
Mediatek systems with RT5650 CODECs
- New CPU drivers for Allwinner S/PDIF controllers
- New CODEC drivers for Maxim MAX9867 and MAX98926 and Realtek RT5514
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Cc+v
-----END PGP SIGNATURE-----
Merge tag 'sound-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"After a heavy storm by syzkaller in 4.5 cycle, we have relatively few
changes in the core at this time while a lot of changes are found in
the driver side, unsurprisingly. Below are some highlights:
ALSA core:
- A few more hardening in ALSA timer codes
- An extension of sequencer API for advertising the card / pid
- Small fixes in compress-offload and jack layers
HD-audio:
- Dynamic PCM assignment in HDMI/DP codec; preparation for upcoming
DP-MST support
- Lots of code refactoring for sharing with ASoC SKL driver
- Regression fixes for Intel HDMI/DP
- Fixups for CX20724 codec, Lenovo AiO
USB-audio:
- Add quirk_alias option to make quirk debugging easier
- Fixes for possible Oops by malformed firmware
Firewire:
- Add support for FW-1804 in tascam driver
- Improvements / changes in card registration, multi stream handling,
etc for DICE
- Lots of code refactoring
ASoC:
- Enhancements of still ongoing topology API
- Lots of commits for Intel Skylake support including HDMI support
- A few Intel Atom driver updates for recent devices
- Lots of improvements to the Renesas drivers
- Capture support for Qualcomm drivers
- Support for TI DaVinci DRA7xxx devices
- New machine drivers for Freescale systems with Cirrus CODECs,
Mediatek systems with RT5650 CODECs
- New CPU drivers for Allwinner S/PDIF controllers
- New CODEC drivers for Maxim MAX9867 and MAX98926 and Realtek RT5514"
* tag 'sound-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (291 commits)
ALSA: hda - Fix mutex deadlock at HDMI/DP hotplug
ALSA: ctl: change return value in compatibility layer so that it's the same value in core implementation
ALSA: mixart: silence an uninitialized variable warning
ALSA: usb-audio: Add sanity checks for endpoint accesses
ALSA: usb-audio: Minor code cleanup in create_fixed_stream_quirk()
ALSA: usb-audio: Fix NULL dereference in create_fixed_stream_quirk()
ALSA: hda - Limit i915 HDMI binding only for HSW and later
ALSA: hda - Fix unconditional GPIO toggle via automute
ALSA: mixart: silence unitialized variable warnings
ALSA: hda - Fixes double fault in nvhdmi_chmap_cea_alloc_validate_get_type
ALSA: intel8x0: Add clock quirk entry for AD1981B on IBM ThinkPad X41.
ALSA: hda - Add new GPU codec ID 0x10de0082 to snd-hda
ASoC: rsnd: add simplified module explanation
ASoC: hdac_hdmi: Add broxton device ID
ASoC: Intel: Bxtn: Add Broxton PCI ID
ASoC: Intel: Skylake: Move Skylake dsp ops & loader ops
ASoC: Intel: add dmabuffer to common sst_dsp
ASoC: Intel: Skylake: Unstatify skl_dsp_enable_core
ASoC: Intel: Skylake: Fix whitepsace issues
ASoC: Intel: Skylake: Move module id defines
...
We forgot to copy monitor_present value when updating the ELD
information. This won't change the ELD retrieval and the jack
notification behavior, but appears only in the proc output. In that
sense, it's no fatal error, but a bug is a bug is a bug.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit [b62232d429fa: ALSA: hda - Limit i915 HDMI binding only for
HSW and later] tried to limit the usage of i915 audio notifier to the
recent Intel models and switch to the old method on pre-Haswell
models. However, it assumed that the i915 component binding hasn't
been done on such models, and the assumption was wrong: namely,
Baytrail had already the i915 component binding due to powerwell
control. Thus, the workaround wasn't applied to Baytrail.
For fixing this properly, this patch introduces a new flag indicating
the usage of audio notifier and codec_has_acomp() refers to this flag
instead of checking the existence of audio component.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.5
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent change in HD-audio HDMI/DP codec driver for allowing the
dynamic PCM binding introduced a new spec->pcm_mutex. One of the
protected area by this mutex is hdmi_present_sense(). As reported by
Intel CI tests, unfortunately, the new mutex causes a deadlock when
the hotplug/unplug is triggered during the codec is in runtime
suspend. The buggy code path is like the following:
hdmi_unsol_event() -> ...
-> hdmi_present_sense()
==> ** here taking pcm_mutex
-> hdmi_present_sense_via_verbs()
-> snd_hda_power_up_pm() -> ... (runtime resume calls)
-> generic_hdmi_resume()
-> hdmi_present_sense()
==> ** here taking pcm_mutex again!
As we can see here, the problem is that the mutex is taken before
snd_hda_power_up_pm() call that triggers the runtime resume. That is,
the obvious solution is to move the power up/down call outside the
mutex; it is exactly what this patch provides.
The patch also clarifies why this bug wasn't caught beforehand. We
used to have the i915 audio component for hotplug for all Intel chips,
and in that code path, there is no power up required but the
information is taken directly from the graphics side. However, we
recently switched back to the old method for some old Intel chips due
to regressions, and now the deadlock issue is surfaced.
Fixes: a76056f2e5 ('ALSA: hda - hdmi dynamically bind PCM to pin when monitor hotplug')
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We could print the uninitialized value of "stat" in the error message.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It turned out that the pre-HSW Intel chips are incompatible with the
naive assumption we had -- the fixed mapping between the port and the
HD-audio widget. This may result in the bad access, as captured by
the recent patch to add a WARN_ON() for the port mapping check.
As a quick workaround, disable the i915 audio component binding for
all pre-Haswell models.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.5
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cirrus HD-audio driver may adjust GPIO pins for EAPD dynamically
depending on the jack plug state. This works fine for the auto-mute
mode where the speaker gets muted upon the HP jack plug. OTOH, when
the auto-mute mode is off, this turns off the EAPD unexpectedly
depending on the jack state, which results in the silent speaker
output.
This patch fixes the silent speaker output issue by setting GPIO bits
constantly when the auto-mute mode is off.
Reported-and-tested-by: moosotc@gmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We print can print the uninitialized memory on error. Which is an info
leak, I suppose but it's basically harmless.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The clock measurement on the AC'97 audio card found in the IBM ThinkPad X41
will often fail, so add a quirk entry to fix it.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=441087
Cc: <stable@vger.kernel.org>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Vendor ID 0x10de0082 is used by a yet-to-be-named GPU chip.
This chip also has the 2-ch audio swapping bug, so patch_nvhdmi is
appropriate here.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This Lenovo ThinkCentre AIO also uses Line2 as mic mute button and
uses GPIO2 to control the mic mute led, so applying this quirk can
make both the button and led work.
Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1555912
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current Intel HDMI codec driver supports only three fixed ports
from port B to port D. However, i915 driver may assign a DP on other
ports, e.g. port A, when no eDP is used. This incompatibility is
caught later at pin_nid_to_pin_index() and results in a warning
message like "HDMI: pin nid 4 not registered" at each time.
This patch filters out such invalid events beforehand, so that the
kernel won't be too grumbling.
Reported-by: Stefan Assmann <sassmann@kpanic.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Just like CX20722, CX7024 codec also requires the power down at reboot
in order to reduce the noise at reboot/shutdown.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=113511
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduce PCI_VENDOR/PCI_SUBVENDOR/PCI_SUBDEVICE defines to replace the
constants scattered in the kernel already used to detect QEMU.
They are defined in the QEMU codebase per docs/specs/pci-ids.txt.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chmap helper arguments are modified to use either hdac_device
object or hdac_chmap object instead of codec specific object.
With this moving these APIs to core will be easier.
Helper added to access a specific channel_allocation object
instead of directly accessing.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add slot and channel count programming to hdmi_chmap object and
move the chmap_ops to core. Use register_chmap_ops API to
register for default ops. Override specific chmap ops in the
driver.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With this chmap object is added as private data and new ops are
added to access driver specific chmap.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
chmap object represents multichannel capability and contains chmap
ops. Legacy driver is updated to use this.
With next set of patches chmap object is moved to common to be
reused by other drivers (ex: skylake ASoC hdmi driver).
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Defer to register acomp eld notifier until hdmi audio driver
is fully ready.
After registering eld notifier, gfx driver can use this
callback function to notify audio driver the monitor
connection event. However this action may happen when
audio driver is adding the pins or doing other initialization.
This is not always safe, however. For example, using
per_pin->lock before the lock is initialized.
Let's register the eld notifier after the initialization is done.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To make sure audio_ptr is set before intel_audio_codec_enable()
or intel_audio_codec_disable() calling pin_eld_notify(),
this patch adds wmb barrier to prevent optimizing.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch applies the microphone-related fix created for the Acer
Aspire E1-572 to the E1-472 as well, as it uses the same Realtek ALC282
CODEC and demonstrates the same issues.
This patch allows an external, headset microphone to be used and limits
the gain on the (quite noisy) internal microphone.
Signed-off-by: Simon South <simon@simonsouth.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
hdmi_find_pcm_slot return -EBUSY when not no pcm slot found,
not -ENODEV. So the caller should compare with -EBUSY.
Fixes: a76056f2e5 ('ALSA: hda - hdmi dynamically bind PCM to pin when monitor hotplug')
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HDSPM driver contains a code issuing zero-division potentially in
system sample rate ctl code. This patch fixes it by not processing
a zero or invalid rate value as a divisor, as well as excluding the
invalid value to be passed via the given ctl element.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the interrupt handler of HD-audio driver assumes that no irq
update is needed while processing the irq. But in reality, it has
been confirmed that the HW irq is issued even during the irq
handling. Since we clear the irq status at the beginning, process the
interrupt, then exits from the handler, the lately issued interrupt is
left untouched without being properly processed.
This patch changes the interrupt handler code to loop over the
check-and-process. The handler tries repeatedly as long as the IRQ
status are turned on, and either stream or CORB/RIRB is handled.
For checking the stream handling, snd_hdac_bus_handle_stream_irq()
returns a value indicating the stream indices bits. Other than that,
the change is only in the irq handler itself.
Reported-by: Libin Yang <libin.yang@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP EliteBook 755 G2 with ALC3228 (ALC280) codec [103c:221c] requires
the known fixup (ALC269_FIXUP_HEADSET_MIC) for making the headset mic
working. Also, it suffers from the loopback noise problem, so we
should disable aamix path as well.
Reported-by: Derick Eddington <derick.eddington@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On one of the machines we enable, we found that the actual speaker volume
did not always correspond to the volume set in alsamixer. This patch
fixes that problem.
This patch was orginally written by Kailang @ Realtek, I've rebased it
to fit sound git master.
Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1549660
Co-Authored-By: Kailang <kailang@realtek.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After login to the desktop on Dell Inspiron 3162,
there's a very loud background noise comes from the builtin speaker.
The noise does not go away even if the speaker is muted.
The noise disappears after using the aamix fixup.
Codec: Realtek ALC3234
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0255
Subsystem Id: 0x10280725
Revision Id: 0x100002
No Modem Function Group found
BugLink: http://bugs.launchpad.net/bugs/1549620
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
eld control is created based on pcm now.
When monitor is connected, eld control will be bound to
pin automatically.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since the recent integration of kctl jack and input jack layers, we
can basically build the jack layer even without input devices. That
is, the jack layer itself can be built with conditional to enable the
input device support or not, while the users may enable always
CONFIG_SND_JACK unconditionally.
For achieving it, this patch changes the following:
- A new Kconfig, CONFIG_SND_JACK_INPUT_DEV, was introduced to indicate
whether the jack layer supports the input device,
- A few items in snd_jack struct and relevant codes are conditionally
built upon CONFIG_SND_JACK_INPUT_DEV,
- The users of CONFIG_SND_JACK drop the messy dependency on
CONFIG_INPUT.
This change also automagically fixes a potential bug in HD-audio
driver Arnd reported, where the NULL or uninitialized jack instance is
dereferenced.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some Skylake machines show the codec probe errors in certain
situations, e.g. HP Z240 desktop fails to probe the onboard Realtek
codec at reloading the snd-hda-intel module like:
snd_hda_intel 0000:00:1f.3: spurious response 0x200:0x2, last cmd=0x000000
snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: lastcmd=0x000f0000
snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x000f0000
snd_hda_intel 0000:00:1f.3: Codec #0 probe error; disabling it...
hdaudio hdaudioC0D2: no AFG or MFG node found
snd_hda_intel 0000:00:1f.3: no codecs initialized
Also, HP G470 G3 suffers from the similar problem, as reported in
bugzilla below. On this machine, the codec probe error appears even
at a fresh boot.
As Libin suggested, the same workaround used for Broxton in the commit
[6639484ddaf6: ALSA: hda - disable dynamic clock gating on Broxton
before reset] can be applied for Skylake in order to fix this problem.
The Intel HW team also confirmed that this is needed for SKL.
This patch makes the workaround applied to both SKL and BXT
platforms. The referred macros are moved and one superfluous macro
(IS_BROXTON()) is another one (IS_BXT()) as well.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112731
Suggested-by: Libin Yang <libin.yang@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use shiny new acpi_dev_present() and remove all the boilerplate
to search for a particular ACPI device. No functional change.
Cf. 2d12b6b381 ("ACPI / utils: Add acpi_dev_present()").
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On Intel platform, if !dyn_pcm_assign, spec->pcm_rec[].jack is not
NULL even after snd_hda_jack_tbl_clear() is called to free snd_jack.
This may cause access invalid memory when calling snd_jack_report.
Fixes: 25e4abb33d ('ALSA: hda - hdmi jack created based on pcm')
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit [991f86d7ae4e: ALSA: hda - Flush the pending probe work at
remove] introduced the sync of async probe work at remove for fixing
the race. However, this may lead to another hangup when the module
removal is performed quickly before starting the probe work, because
it issues flush_work() and it's blocked forever.
The workaround is to use cancel_work_sync() instead of flush_work()
there.
Fixes: 991f86d7ae ('ALSA: hda - Flush the pending probe work at remove')
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The hda_jack_tbl entries are managed by snd_array for allowing
multiple jacks. It's good per se, but the problem is that struct
hda_jack_callback keeps the hda_jack_tbl pointer. Since snd_array
doesn't preserve each pointer at resizing the array, we can't keep the
original pointer but have to deduce the pointer at each time via
snd_array_entry() instead. Actually, this resulted in the deference
to the wrong pointer on codecs that have many pins such as CS4208.
This patch replaces the pointer to the NID value as the search key.
As an unexpected good side effect, this even simplifies the code, as
only NID is needed in most cases.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some Sony VAIO AiO models (VGC-JS4EF and VGC-JS25G, both with PCI SSID
104d:9044) need the same quirk to make the speaker working properly.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112031
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 0c25ad8040.
The original commit disabled the aamixer path due to the noise
problem, but it turned out that some mobo with the same PCI SSID
doesn't suffer from the issue, and the disabled function (analog
loopback) is still demanded by users.
Since the recent commit [e7fdd52779a6: ALSA: hda - Implement loopback
control switch for Realtek and other codecs], we have the dynamic
mixer switch to enable/disable the aamix path, and we don't have to
disable the path statically any longer. So, let's revert the
disablement, so that only the user suffering from the noise problem
can turn off the aamix on the fly.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=108301
Reported-by: <mutedbytes@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The static checker warning is:
sound/pci/hda/patch_hdmi.c:460 hdmi_eld_ctl_get()
error: __memcpy() 'eld->eld_buffer' too small (256 vs 512)
I have a hard time figuring out if this can ever cause an information leak
(I don't think so), but nonetheless it does not hurt to increase the
robustness of the code.
Fixes: 68e03de985 ('ALSA: hda - hdmi: Do not expose eld data when eld is invalid')
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Cc: <stable@vger.kernel.org> # v3.9+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mac Mini 7,1 model with CS4208 codec reports the headphone jack
detection wrongly in an inverted way. Moreover, the advertised pins
for the audio input and SPDIF output have actually no jack detection.
This patch addresses these issues. The inv_jack_detect flag is set
for fixing the headphone jack detection, and the pin configs for audio
input and SPDIF output are marked as non-detectable.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105161
Report-and-tested-by: moosotc@gmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell create new platform with ALC298 codec.
This patch will enable headset mode for ALC225/ALC3253 platform.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add new support for ALC225, yet another variant of ALC298 codec.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Build chmap kctl based on pcm. The first chmap kctl will be
mapped to the first pcm, and so on.
When a monitor is connected to a pin, the chmap kctl can
find the pin and the monitor through the pcm index.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since kthread_create can be failed, it needs to check
whether error occurred and return error code.
Signed-off-by: Insu Yun <wuninsu@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On Broxton, to make sure the reset controller works properly,
MISCBDCGE bit (bit 6) in CGCTL (0x48) of PCI configuration space
need be cleared before reset and set back to 1 after reset.
Otherwise, it may prevent the CORB/RIRB logic from being reset.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
SPDIF ctl should be based on pcm. Each spdif ctl controls
one pcm state.
This patch creates spdif based on pcm and no longer
based on pin.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jack is created based on pcm.
Apply the acomp jack rule to dyn_pcm_assign.
For dyn_pcm_assign:
Driver does not use hda_jack. It operates snd_jack directly.
snd_jack pointer will be stored in spec->pcm.jack instead of
the current spec->acomp_jack. When pcm is assigned to pin,
jack will be assigned to pin automatically.
For !dyn_pcm_assign:
Driver continues using hda_jack for less impact on the old cases.
Pcm is statically assigned to pin. So is jack. spec->pcm.jack
saves the snd_jack pointer created in hda_jack.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use struct hdmi_pcm wrapper for hdmi pcm management.
All PCM related features, like jack, will be put in this structure.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Setup pin configuration when monitor is hotplugged
in pcm dynamic assignment if the PCM is in open state.
When monitor is disconnect, The pin will be reset.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dynamically bind/unbind the PCM to pin when HDMI/DP monitor hotplug.
When monitor is connected, find a proper PCM for the monitor.
When monitor is disconnected, unbind the PCM from the pin.
The binding policy (use Intel platform as example) is:
1. Try to use the legacy pin-pcm mapping for the device entry 0
of the pin.
2. If step 1 fails, try to bind pin to the backup PCMs. For example,
on Intel platform, if DP MST is enabled, 5 PCMs will be created.
PCM 3, PCM 7, PCM 8 are supposed to be used by device entry 0 of
pin 5, pin 6 and pin 7. PCM 9 and PCM 10 are the backup PCMs.
3. If step 2 fails, try to find any PCM to bind to the pin.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, the driver operates the spdif based on pin.
This is ok for the current driver as pcm is statically
bound to the pin.
However, if the driver uses dynamically pcm assignment,
this will cause confusion for user space.
The patch changes spdif operation from pin based to pcm based.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pulseaudio requires open pcm successfully when probing.
This patch handles playback without monitor in dynamic pcm assignment
mode. It tries to open/prepare/close pcm successfully even there is
no pin bound to the PCM. On the meantime, it will try to find a proper
converter for the PCM.
As pcm is This patch introduces a pcm_lock in struct hdmi_spec.
This lock is used to protect:
1. the variables in struct hdmi_spec;
2. other variables shared for dynamic pcm assignment mode
3. device entry selection. As each device entry is represented by
a separate struct struct hdmi_spec_per_pin, the lock in per_pin
is not enough. Please see details below.
MST audio device entry operation:
1. select device entry on the pin
2. operate on the pin nid
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Begin to support dynamic PCM assignment to pin in
hdmi audio driver.
This means PCM will not be statically bound with pin.
When there is a monitor connected, the corresponding pin
will try to find a proper PCM to bind. When the monitor
is disconnected, the corresponding pin will unbind
the PCM. This helps to reduce the PCM number when there
are many pins (device entries in DP MST mode) and only
a few of them work at the same time.
This patch adds the pcm member in struct hdmi_spec_per_pin.
When PCM is dynamically bound to the pin, the member pcm
will pointer to the corresponding pcm_rec[] in hdmi_spec,
which means the hda_pcm is bound to the pin.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Vendor ID 0x10de0083 is used by a yet-to-be-named GPU chip.
This chip also has the 2-ch audio swapping bug, so patch_nvhdmi is
appropriate here.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since the build of PCM timer may be disabled via Kconfig now, each
driver that provides a timer interface needs to set CONFIG_SND_TIMER
explicitly. Otherwise it may get a build error due to missing
symbol.
Fixes: 90bbaf66ee ('ALSA: timer: add config item to export PCM timer disabling for expert')
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Here are lots of small fixes that have been collected since the
previous pull. This time, not only trivial ones but fixes for some
serious bugs are included:
- Fix for CPU lockups by snd-hrtimer accesses
- Fix for unsafe disconnection handling in ALSA timer code
- Fix for Oops due to race at HD-audio module removal
- Fixes for possible memory corruption via 32bit PCM and sequencer
compat ioctls
- Fix for regression in HD-audio generic model handling
- Suppress kernel warnings for invalid TLV ioctls that may flood up
- Fix the missing SSC clock handling for at73c213
- A pin fixup for ASUS N550JX
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=6OeM
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are lots of small fixes that have been collected since the
previous pull. This time, not only trivial ones but fixes for some
serious bugs are included:
- Fix for CPU lockups by snd-hrtimer accesses
- Fix for unsafe disconnection handling in ALSA timer code
- Fix for Oops due to race at HD-audio module removal
- Fixes for possible memory corruption via 32bit PCM and sequencer
compat ioctls
- Fix for regression in HD-audio generic model handling
- Suppress kernel warnings for invalid TLV ioctls that may flood up
- Fix the missing SSC clock handling for at73c213
- A pin fixup for ASUS N550JX"
* tag 'sound-fix-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: timer: Introduce disconnect op to snd_timer_instance
ALSA: timer: Handle disconnection more safely
ALSA: hda - Flush the pending probe work at remove
ALSA: hda - Fix missing module loading with model=generic option
ALSA: hda - Degrade i915 binding failure message
ALSA: at73c213: manage SSC clock
ALSA: control: Avoid kernel warnings from tlv ioctl with numid 0
ALSA: seq: Fix snd_seq_call_port_info_ioctl in compat mode
ALSA: pcm: Fix snd_pcm_hw_params struct copy in compat mode
ALSA: hrtimer: Fix stall by hrtimer_cancel()
ALSA: hda - Fix bass pin fixup for ASUS N550JX
As HD-audio driver does deferred probe internally via workqueue, the
driver might go into the mixed state doing both probe and remove when
the module gets unloaded during the probe work. This eventually
triggers an Oops, unsurprisingly.
For avoiding this race, we just need to flush the pending probe work
explicitly before actually starting the resource release.
Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=960710
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the generic codec driver is specified via model option or such,
the hda driver doesn't try to load the generic driver module but still
loads the codec-specific driver, and this ends up with the binding
failure.
This patch fixes it by moving the generic module request in the common
helper code.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111021
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently HD-audio driver on Intel Skylake or Broxteon gives an error
message when binding with i915 audio component fails. However, this
isn't any serious error on a system without Intel graphics. Indeed
there are such systems, where a third-party codec (e.g. Creative) is
put on the mobo while using other discrete GPU (e.g. Nvidia).
Printing a kernel "error" message is overreaction in such a case.
This patch downgrades the print level for that message. For systems
that mandate the i915 binding (e.g. Haswell or Broadwell HDMI/DP),
another kernel error message is shown in addition to make clear what
went wrong.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111021
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASUS N550JX (PCI SSID 1043:13df) requires the same fixup for a bass
speaker output pin as other N550 models.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110001
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We've had quite busy weeks in this cycle. Looking at ALSA core, the
significant changes are a few fixes wrt timer and sequencer ioctls
that have been revealed by fuzzer recently. Other than that, ASoC
core got a few updates about DAI link handling, but these are rather
straightforward refactoring.
In drivers scene, ASoC received quite lots of new drivers in addition
to bunch of updates for still ongoing Intel Skylake support and
topology API. HD-audio gained a new HDMI/DP hotplug notification via
component. FireWire got a pile of code refactoring/updates with
SCS.1x driver integration.
More highlights are shown below.
[NOTE: this contains also many commits for DRM. This is due to the
pull of drm stable branch into sound tree, as the base of i915 audio
component work for HD-audio. The highlights below don't contain
these DRM changes, as these are supposed to be pulled via drm tree in
anyway sooner or later.]
Core
- Handful fixes to harden ALSA timer and sequencer ioctls against
races reported by syzkaller fuzzer
- Irq description string can be unique to each card; only for
HD-audio for now
ASoC
- Conversion of the array of DAI links to a list for supporting
dynamically adding and removing DAI links
- Topology API enhancements to make everything more component based
and being able to specify PCM links via topology
- Some more fixes for the topology code, though it is still not final
and ready for enabling in production; we really need to get to the
point where that can be done
- A pile of changes for Intel SkyLake drivers which hopefully deliver
some useful initial functionality for systems with this chipset,
though there is more work still to come
- Lots of new features and cleanups for the Renesas drivers
- ANC support for WM5110
- New drivers: Imagination Technologies IPs, Atmel class D speaker,
Cirrus CS47L24 and WM1831, Dialog DA7128, Realtek RT5659 and
RT56156, Rockchip RK3036, TI PC3168A, and AMD ACP
- Rename PCM1792a driver to be generic pcm179x
HD-Audio
- Use audio component for i915 HDMI/DP hotplug handling
- On-demand binding with i915 driver
- bdl_pos_adj parameter adjustment for Baytrail controllers
- Enable power_save_node for CX20722; this shouldn't lead to
regression, hopefully
- Kabylake HDMI/DP codec support
- Quirks for Lenovo E50-80, Dell Latitude E-series, and other Dell
machines
- A few code refactoring
FireWire
- Lots of code cleanup and refactoring
- Integrate the support of SCS.1x devices into snd-oxfw driver;
snd-scs1x driver is obsoleted
USB-audio
- Fix possible NULL dereference at disconnection
- A regression fix for Native Instruments devices
Misc
- A few code cleanups of fm801 driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Gvgb
-----END PGP SIGNATURE-----
Merge tag 'sound-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've had quite busy weeks in this cycle. Looking at ALSA core, the
significant changes are a few fixes wrt timer and sequencer ioctls
that have been revealed by fuzzer recently. Other than that, ASoC
core got a few updates about DAI link handling, but these are rather
straightforward refactoring.
In drivers scene, ASoC received quite lots of new drivers in addition
to bunch of updates for still ongoing Intel Skylake support and
topology API. HD-audio gained a new HDMI/DP hotplug notification via
component. FireWire got a pile of code refactoring/updates with
SCS.1x driver integration.
More highlights are shown below.
[ NOTE: this contains also many commits for DRM. This is due to the
pull of drm stable branch into sound tree, as the base of i915 audio
component work for HD-audio. The highlights below don't contain
these DRM changes, as these are supposed to be pulled via drm tree
in anyway sooner or later. ]
Core:
- Handful fixes to harden ALSA timer and sequencer ioctls against
races reported by syzkaller fuzzer
- Irq description string can be unique to each card; only for
HD-audio for now
ASoC:
- Conversion of the array of DAI links to a list for supporting
dynamically adding and removing DAI links
- Topology API enhancements to make everything more component based
and being able to specify PCM links via topology
- Some more fixes for the topology code, though it is still not final
and ready for enabling in production; we really need to get to the
point where that can be done
- A pile of changes for Intel SkyLake drivers which hopefully deliver
some useful initial functionality for systems with this chipset,
though there is more work still to come
- Lots of new features and cleanups for the Renesas drivers
- ANC support for WM5110
- New drivers: Imagination Technologies IPs, Atmel class D speaker,
Cirrus CS47L24 and WM1831, Dialog DA7128, Realtek RT5659 and
RT56156, Rockchip RK3036, TI PC3168A, and AMD ACP
- Rename PCM1792a driver to be generic pcm179x
HD-Audio:
- Use audio component for i915 HDMI/DP hotplug handling
- On-demand binding with i915 driver
- bdl_pos_adj parameter adjustment for Baytrail controllers
- Enable power_save_node for CX20722; this shouldn't lead to
regression, hopefully
- Kabylake HDMI/DP codec support
- Quirks for Lenovo E50-80, Dell Latitude E-series, and other Dell
machines
- A few code refactoring
FireWire:
- Lots of code cleanup and refactoring
- Integrate the support of SCS.1x devices into snd-oxfw driver;
snd-scs1x driver is obsoleted
USB-audio:
- Fix possible NULL dereference at disconnection
- A regression fix for Native Instruments devices
Misc:
- A few code cleanups of fm801 driver"
* tag 'sound-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (722 commits)
ALSA: timer: Code cleanup
ALSA: timer: Harden slave timer list handling
ALSA: hda - Add fixup for Dell Latitidue E6540
ALSA: timer: Fix race among timer ioctls
ALSA: hda - add codec support for Kabylake display audio codec
ALSA: timer: Fix double unlink of active_list
ALSA: usb-audio: Fix mixer ctl regression of Native Instrument devices
ALSA: hda - fix the headset mic detection problem for a Dell laptop
ALSA: hda - Fix white noise on Dell Latitude E5550
ALSA: hda_intel: add card number to irq description
ALSA: seq: Fix race at timer setup and close
ALSA: seq: Fix missing NULL check at remove_events ioctl
ALSA: usb-audio: Avoid calling usb_autopm_put_interface() at disconnect
ASoC: hdac_hdmi: remove unused hdac_hdmi_query_pin_connlist
ASoC: AMD: Add missing include file
ALSA: hda - Fixup inverted internal mic for Lenovo E50-80
ALSA: usb: Add native DSD support for Oppo HA-1
ASoC: Make aux_dev more like a generic component
ASoC: bcm2835: cleanup includes by ordering them alphabetically
ASoC: AMD: Manage ACP 2.x SRAM banks power
...
Another Dell model, another fixup entry: Latitude E6540 needs the same
fixup as other Latitude E series as workaround for noise problems.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=104341
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds codec ID (0x8086280b) for Kabylake display codec
and apply the hsw fix-ups to Kabylake.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The machine uses codec alc255, and the pin configuration value for
pin 0x14 on this machine is 0x90171130 which is not in the pin quirk
table yet.
Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1533461
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell Latitude E5550 (1028:062c) has a white noise problem like other
Latitude E models, and it gets fixed by the very same quirk as well.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110591
Cc: <stable@vger.kernel.org> # v4.1+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the info in /proc/interrupts doesn't allow to figure out which
interrupt belongs to which card (HDMI, PCH, ..).
Therefore add card details to the interrupt description.
With the patch the info in /proc/interrupts looks like this:
PCI-MSI 442368-edge snd_hda_intel:card1
PCI-MSI 49152-edge snd_hda_intel:card0
NOTE: this patch adds the new irq_descr field snd_card struct that is
filled automatically at a card object creation. This can be used
generically for other drivers as well. The changes for others will
follow later -- tiwai
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
* patchwork: (204 commits)
[media] rc: sunxi-cir: Initialize the spinlock properly
[media] rtl2832: do not filter out slave TS null packets
[media] rtl2832: print reg number on error case
[media] rtl28xxu: return demod reg page from driver cache
[media] coda: enable MPEG-2 ES decoding
[media] coda: don't start streaming without queued buffers
[media] coda: hook up vidioc_prepare_buf
[media] coda: relax coda_jpeg_check_buffer for trailing bytes
[media] coda: make to_coda_video_device static
[media] s5p-mfc: remove volatile attribute from MFC register addresses
[media] s5p-mfc: merge together s5p_mfc_hw_call and s5p_mfc_hw_call_void
[media] s5p-mfc: use spinlock to protect MFC context
[media] s5p-mfc: remove unnecessary callbacks
[media] s5p-mfc: make queue cleanup code common
[media] s5p-mfc: use one implementation of s5p_mfc_get_new_ctx
[media] s5p-mfc: constify s5p_mfc_codec_ops structures
[media] au8522: Avoid memory leak for device config data
[media] ir-lirc-codec.c: don't leak lirc->drv-rbuf
[media] uvcvideo: small cleanup in uvc_video_clock_update()
[media] uvcvideo: Fix reading the current exposure value of UVC
...
The cs5535audio_dma_ops structures are never modified, so declare them as
const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The atiixp_dma_ops structures are never modified, so declare them as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Then users can remap the keycode from userspace. If without the remap,
the input device will pass KEY_MICMUTE to userspace, but in X11 layer,
it uses KEY_F20 rather than KEY_MICMUTE for XF86AudioMicMute. After
adding the keycode map, users can remap the keycode to any value users
want.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Lenovo ThinkCenter AIO uses Line2 (NID 0x1b) to implement the
micmute hotkey, here we register an input device and use Line2 unsol
event to collect the hotkey pressing or releasing.
In the meanwhile, the micmute led is controlled by GPIO2, so we
use an existing function alc_fixup_gpio_mic_mute_hook() to control
the led.
[Hui: And there are two places to register the input device, to make
the code simple and clean, move the two same code sections into a
function.]
Cc: <stable@vger.kernel.org>
Signed-off-by: Kailang <kailang@realtek.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Without this patch, internal speaker and line-out work,
but front headphone output jack stays silent on the
Mac Pro 4,1.
This code path also gets executed on the MacPro 5,1 due
to identical codec SSID, but i don't know if it has any
positive or adverse effects there or not.
(v2) Implement feedback from Takashi Iwai: Reuse
alc889_fixup_mbp_vref and just add a new nid
0x19 for the MacPro 4,1.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The suspend / resume cycle resets the settings of the FM tuner. Restore
frequency settings on resume.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In symmetry we save context first before suspend and restore it last after
resume.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In case of tuner only card there is no need to take care of the codec which is
anyway absent.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If user does not supply tea575x_tuner parameter the driver tries to detect the
tuner type. The failed codec initialization is considered as FM-only card
present, however the driver still registers an IRQ handler for it.
Move codec detection earlier to set tea575x_tuner parameter before check.
Here the following functions are introduced
reset_coded() resets AC97 codec
snd_fm801_chip_multichannel_init() initializes cards with multichannel support
Fixes: 5618955c42 (ALSA: fm801: move to pcim_* and devm_* functions)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit d7ba858a7f (ALSA: fm801: implement TEA575x tuner autodetection)
brings autodetection to the driver. However the autodetection algorithm misses
the TUNER_ONLY bit if it is supplied by the user.
Thus, user gets weird messages and no card registered.
snd_fm801 0000:0d:01.0: detected TEA575x radio type SF64-PCR
snd_fm801 0000:0d:01.0: AC'97 interface is busy (1)
snd_fm801 0000:0d:01.0: AC'97 interface is busy (1)
...
snd_fm801 0000:0d:01.0: AC'97 0 does not respond - RESET
snd_fm801 0000:0d:01.0: AC'97 interface is busy (1)
snd_fm801 0000:0d:01.0: AC'97 interface is busy (1)
snd_fm801 0000:0d:01.0: AC'97 0 access is not valid [0x0], removing mixer.
snd_fm801: probe of 0000:0d:01.0 failed with error -5
Do a copy of TUNER_ONLY bit to be applied after autodetection is done.
Fixes: d7ba858a7f (ALSA: fm801: implement TEA575x tuner autodetection)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is no need to store struct pci_dev in struct fm801. Generic struct device
can be easily translated to struct pci_dev whenever it's needed, in particular
for one user for now.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The compiler complains on unused condition as follows
sound/pci/fm801.c: In function ‘snd_fm801_interrupt’:
sound/pci/fm801.c:585:3: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
Put the curly braces around empty body as suggested.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The patch introduces two new helpers fm801_iowrite16() and fm801_ioread16() to
write and read the registers by offset. Previously similar was done to access
the hardware registers by their names.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Otherwise we will have a warning on ->remove() since device is a PCI one.
WARNING: CPU: 4 PID: 1411 at /home/andy/prj/linux/fs/proc/generic.c:575 remove_proc_entry+0x137/0x160()
remove_proc_entry: removing non-empty directory 'irq/21', leaking at least 'snd_fm801'
Fixes: 5618955c42 (ALSA: fm801: move to pcim_* and devm_* functions)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It takes three minutes to enter into hibernation on some OEM SKL
machines and we see many codec spurious response after thaw() opertion.
This is because HDA is still in D0 state after freeze() call and
pci_pm_freeze/pci_pm_freeze_noirq() don't set D3 hot in pci_bus driver.
It seems bios still access HDA when system enter into freeze state,
HDA will receive codec response interrupt immediately after thaw() call.
Because of this unexpected interrupt, HDA enter into a abnormal
state and slow down the system enter into hibernation.
In this patch, we put HDA into D3 hot state in azx_freeze_noirq() and
put HDA into D0 state in azx_thaw_noirq().
V2: Only apply this fix to SKL+
Fix compile error when CONFIG_PM_SLEEP isn't defined
[Yet another fix for CONFIG_PM_SLEEP ifdef and the additional comment
by tiwai]
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AZX_DCAPS_POSFIX_VIA is coupled always with AZX_DRIVER_VIA type, so we
don't have to keep this bit in dcaps. Save one more!
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AZX_DCAPS_RIRB_DELAY is dedicated only for Nvidia and its purpose is
just to set a flag in bus. So it's better to be set in the toplevel
driver, either hda_intel.c or hda_tegra.c, instead of the common
hda_controller.c. This also allows us to strip this flag from dcaps,
so save one more bit there.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AZX_DCAPS_RIRB_PRE_DELAY is always tied with AZX_DCAPS_CTX_WORKAROUND,
which is Creative's XFi specific. So, we can replace it and reduce
one more bit free for DCAPS.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply the same fixup for Thinkpad with dock to Thinkpad X1 Carbon 2nd,
too. This reduces the annoying loud cracking noise problem, as well
as the support of missing docking port.
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=958439
Reported-and-tested-by: Benjamin Poirier <bpoirier@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lenovo Thinkpads with Realtek codecs may still have some loud
crackling noises at reboot/shutdown even though a few previous fixes
have been applied. It's because the previous fix (disabling the
default shutup callback) takes effect only at transition of the codec
power state. Meanwhile, at reboot or shutdown, we don't take down the
codec power as default, thus it triggers the same problem unless the
codec is powered down casually by runtime PM.
This patch tries to address the issue. It gives two things:
- implement the separate reboot_notify hook to struct alc_spec, and
call it optionally if defined.
- turn off the codec to D3 for Thinkpad models via this new callback
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=958439
Reported-and-tested-by: Benjamin Poirier <bpoirier@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It seems that a workaround for Thinkpad T440s crackling noise can be
applied generically to all Thinkpad models: namely, disabling the
default alc269 shutup callback. This patch moves it to the existing
alc_fixup_tpt440_dock() while also replacing the rest code with
another existing alc_fixup_disable_aamix(). It resulted in a good
code reduction.
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=958439
Reported-and-tested-by: Benjamin Poirier <bpoirier@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These laptops support both headphone, headset and mic modes
for the 3.5mm jack.
Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1526330
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Intel Atom processors seem to have a problem at recording when
bdl_pos_adj is set to an odd value. When a value like 1 is used, it
may drop the samples unexpectedly. Actually, for the old Atoms, we
used to set AZX_DRIVER_SCH type, and this assigns 32 as default.
Meanwhile the newer chips, Baytrail and Braswell, are set as
AZX_DRIVER_PCH, and the lower default value, 1, is assigned.
This patch changes the default values for these chipsets to a safer
default, 32, again. Since changing the driver type (AZX_DRIVER_XXX)
leads to the rename of the driver string, it would result in a
possible regression. So, we can't change the type. Instead, in this
patch, manual (ugly) PCI ID checks are added on top.
A drawback by this increase is the slight increase of the latency, but
it's a sub-ms order in normal situations, so mostly negligible.
Reported-and-tested-by: Jochen Henneberg <jh@henneberg-systemdesign.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Just a minor cleanup; instead of passing an array, pass the assigned
bdl_pos_adj option value directory in struct azx. Also split the code
to get the default bdl_pos_adj value for the change that will follow
after this.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A couple of i915_audio_component ops have been added and accessed
directly from patch_hdmi.c. Ideally all these should be factored out
into hdac_i915.c.
This patch does it, adds two new helper functions for setting N/CTS
and fetching ELD bytes. One bonus is that the hackish widget vs port
mapping is also moved to hdac_i915.c, so that it can be fixed /
enhanced more cleanly.
Reviewed-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since we have a new audio component ops to fetch the current ELD and
state now, we can reduce the usage of unsol event of HDMI/DP pins.
The unsol event isn't only unreliable, but it also needs the power
up/down of the codec and link at each time, which is a significant
power and time loss.
In this patch, the jack creation and unsol/jack event handling are
modified to use the audio component for the dedicated Intel chips.
The jack handling got slightly more codes than a simple usage of
hda_jack layer since we need to deal directly with snd_jack object;
the hda_jack layer is basically designed for the pin sense read and
unsol events, both of which aren't used any longer in our case.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent commit [e90247f9fcee: ALSA: hda - Split ELD update code
from hdmi_present_sense()] rewrote the HDMI jack handling code, but a
slight behavior change sneaked in unexpectedly. When the jack isn't
connected, it tries repoll unnecessarily.
This patch addresses the flaw, to the right behavior as before.
Fixes: e90247f9fc ('ALSA: hda - Split ELD update code from hdmi_present_sense()')
Reported-and-tested-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Due to the recent change, HDA controller driver for Intel PCH tries to
bind i915 audio component always at the probe time no matter whether
HDMI/DP codec is found. This is, however, superflulous for old
chipsets (e.g. on IVB) where they don't have always the HDMI/DP codecs
but often have only a discrete GPU instead.
For the newer chipsets, we need already the i915 binding from the
beginning due to power well control. Meanwhile, for older chipsets
where we don't need power well, we don't need the i915 binding at the
controller level.
This patch removes again the i915 binding in the HDA controller driver
for old Intel PCHs, but adds the binding in HDMI/DP codec driver
instead. This allows still the use of the direct notification from
the graphics driver while we can avoid the unnecessary load of i915
driver for machines only with another GPU.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The audio component is enabled only when CONFIG_SND_HDA_I915 is set.
Give a dummy macro for allowing the compiler optimize out the relevant
codes when this Kconfig isn't set.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Alienware 17 (2015) has the same card and pin configuration of the
Alienware 15, so the same quirks must be applied.
Signed-off-by: Gabriele Martino <g.martino@gmx.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Conrad Kostecki