Current method of checking pointer error is not user friendly.
Especially the __must_check define makes this less intuitive.
Since, libbpf has an API libbpf_get_error() which checks pointer error,
this commit refactors existing pointer error check logic with libbpf.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200516040608.1377876-2-danieltimlee@gmail.com
Until now we have only had minimal ktls+sockmap testing when being
used with helpers and different sendmsg/sendpage patterns. Add a
pass with ktls here.
To run just ktls tests,
$ ./test_sockmap --whitelist="ktls"
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939736278.15176.5435314315563203761.stgit@john-Precision-5820-Tower
This adds a blacklist to test_sockmap. For example, now we can run
all apply and cork tests except those with timeouts by doing,
$ ./test_sockmap --whitelist "apply,cork" --blacklist "hang"
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939734350.15176.6643981099665208826.stgit@john-Precision-5820-Tower
Allow running specific tests with a comma deliminated whitelist. For example
to run all apply and cork tests.
$ ./test_sockmap --whitelist="cork,apply"
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939732464.15176.1959113294944564542.stgit@john-Precision-5820-Tower
At the moment test_sockmap runs all 800+ tests ungrouped which is not
ideal because it makes it hard to see what is failing but also more
importantly its hard to confirm all cases are tested. Additionally,
after inspecting we noticed the runtime is bloated because we run
many duplicate tests. Worse some of these tests are known error cases
that wait for the recvmsg handler to timeout which creats long delays.
Also we noted some tests were not clearing their options and as a
result the following tests would run with extra and incorrect options.
Fix this by reorganizing test code so its clear what tests are running
and when. Then it becomes easy to remove duplication and run tests with
only the set of send/recv patterns that are relavent.
To accomplish this break test_sockmap into subtests and remove
unnecessary duplication. The output is more readable now and
the runtime reduced.
Now default output prints subtests like this,
$ ./test_sockmap
# 1/ 6 sockmap:txmsg test passthrough:OK
...
#22/ 1 sockhash:txmsg test push/pop data:OK
Pass: 22 Fail: 0
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939728384.15176.13601520183665880762.stgit@john-Precision-5820-Tower
The recv thread in test_sockmap waits to receive all bytes from sender but
in the case we use pop data it may wait for more bytes then actually being
sent. This stalls the test harness for multiple seconds. Because this
happens in multiple tests it slows time to run the selftest.
Fix by doing a better job of accounting for total bytes when pop helpers
are used.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939726542.15176.5964532245173539540.stgit@john-Precision-5820-Tower
Running test_sockmap with arguments to specify a test pattern requires
including a cgroup argument. Instead of requiring this if the option is
not provided create one
This is not used by selftest runs but I use it when I want to test a
specific test. Most useful when developing new code and/or tests.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939722675.15176.6294210959489131688.stgit@john-Precision-5820-Tower
The prints in the test_sockmap programs were only useful when we
didn't have enough control over test infrastructure to know from
user program what was being pushed into kernel side.
Now that we have or will shortly have better test controls lets
remove the printers. This means we can remove half the programs
and cleanup bpf side.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939720756.15176.9806965887313279429.stgit@john-Precision-5820-Tower
There is a much higher chance we can see the regressions if the
test is part of test_progs.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200515194904.229296-2-sdf@google.com
Commit 294f2fc6da ("bpf: Verifer, adjust_scalar_min_max_vals to always
call update_reg_bounds()") changed the way verifier logs some of its state,
adjust the test_align accordingly. Where possible, I tried to not copy-paste
the entire log line and resorted to dropping the last closing brace instead.
Fixes: 294f2fc6da ("bpf: Verifer, adjust_scalar_min_max_vals to always call update_reg_bounds()")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200515194904.229296-1-sdf@google.com
Fixes the following warnings:
hashmap.c: In function ‘hashmap__clear’:
hashmap.h:150:20: error: comparison of integer expressions of different signedness: ‘int’ and ‘size_t’ {aka ‘long unsigned int’} [-Werror=sign-compare]
150 | for (bkt = 0; bkt < map->cap; bkt++) \
hashmap.c: In function ‘hashmap_grow’:
hashmap.h:150:20: error: comparison of integer expressions of different signedness: ‘int’ and ‘size_t’ {aka ‘long unsigned int’} [-Werror=sign-compare]
150 | for (bkt = 0; bkt < map->cap; bkt++) \
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200515165007.217120-4-irogers@google.com
As per 15d83c4d7c ("bpf: Allow loading of a bpf_iter program") we only
allow a range of [0,1] for return codes. Therefore BPF_TRACE_ITER relies
on the default tnum_range(0, 1) which is set in range var. On recent merge
of net into net-next commit e92888c72f ("bpf: Enforce returning 0 for
fentry/fexit progs") got pulled in and caused a merge conflict with the
changes from 15d83c4d7c. The resolution had a snall hiccup in that it
removed the [0,1] range restriction again so that BPF_TRACE_ITER would
have no enforcement. Fix it by adding it back.
Fixes: da07f52d3c ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Move the bpf verifier trace check into the new switch statement in
HEAD.
Resolve the overlapping changes in hinic, where bug fixes overlap
the addition of VF support.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix sk_psock reference count leak on receive, from Xiyu Yang.
2) CONFIG_HNS should be invisible, from Geert Uytterhoeven.
3) Don't allow locking route MTUs in ipv6, RFCs actually forbid this,
from Maciej Żenczykowski.
4) ipv4 route redirect backoff wasn't actually enforced, from Paolo
Abeni.
5) Fix netprio cgroup v2 leak, from Zefan Li.
6) Fix infinite loop on rmmod in conntrack, from Florian Westphal.
7) Fix tcp SO_RCVLOWAT hangs, from Eric Dumazet.
8) Various bpf probe handling fixes, from Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
selftests: mptcp: pm: rm the right tmp file
dpaa2-eth: properly handle buffer size restrictions
bpf: Restrict bpf_trace_printk()'s %s usage and add %pks, %pus specifier
bpf: Add bpf_probe_read_{user, kernel}_str() to do_refine_retval_range
bpf: Restrict bpf_probe_read{, str}() only to archs where they work
MAINTAINERS: Mark networking drivers as Maintained.
ipmr: Add lockdep expression to ipmr_for_each_table macro
ipmr: Fix RCU list debugging warning
drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.c
net: phy: broadcom: fix BCM54XX_SHD_SCR3_TRDDAPD value for BCM54810
tcp: fix error recovery in tcp_zerocopy_receive()
MAINTAINERS: Add Jakub to networking drivers.
MAINTAINERS: another add of Karsten Graul for S390 networking
drivers: ipa: fix typos for ipa_smp2p structure doc
pppoe: only process PADT targeted at local interfaces
selftests/bpf: Enforce returning 0 for fentry/fexit programs
bpf: Enforce returning 0 for fentry/fexit progs
net: stmmac: fix num_por initialization
security: Fix the default value of secid_to_secctx hook
libbpf: Fix register naming in PT_REGS s390 macros
...
A few minor bug fixes for user visible defects, and one regression:
- Various bugs from static checkers and syzkaller
- Add missing error checking in mlx4
- Prevent RTNL lock recursion in i40iw
- Fix segfault in cxgb4 in peer abort cases
- Fix a regression added in 5.7 where the IB_EVENT_DEVICE_FATAL could be
lost, and wasn't delivered to all the FDs
-----BEGIN PGP SIGNATURE-----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=R5BJ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A few minor bug fixes for user visible defects, and one regression:
- Various bugs from static checkers and syzkaller
- Add missing error checking in mlx4
- Prevent RTNL lock recursion in i40iw
- Fix segfault in cxgb4 in peer abort cases
- Fix a regression added in 5.7 where the IB_EVENT_DEVICE_FATAL could
be lost, and wasn't delivered to all the FDs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/uverbs: Move IB_EVENT_DEVICE_FATAL to destroy_uobj
RDMA/uverbs: Do not discard the IB_EVENT_DEVICE_FATAL event
RDMA/iw_cxgb4: Fix incorrect function parameters
RDMA/core: Fix double put of resource
IB/core: Fix potential NULL pointer dereference in pkey cache
IB/hfi1: Fix another case where pq is left on waitlist
IB/i40iw: Remove bogus call to netdev_master_upper_dev_get()
IB/mlx4: Test return value of calls to ib_get_cached_pkey
RDMA/rxe: Always return ERR_PTR from rxe_create_mmap_info()
i40iw: Fix error handling in i40iw_manage_arp_cache()
This Kselftest update for Linux 5.7-rc6 consists of
- lkdtm runner fixes to prevent dmesg clearing and shellcheck errors
- ftrace test handling when test module doesn't exist
- nsfs test fix to replace zero-length array with flexible-array
- dmabuf-heaps test fix to return clear error value
-----BEGIN PGP SIGNATURE-----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=2cqI
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
- lkdtm runner fixes to prevent dmesg clearing and shellcheck errors
- ftrace test handling when test module doesn't exist
- nsfs test fix to replace zero-length array with flexible-array
- dmabuf-heaps test fix to return clear error value
* tag 'linux-kselftest-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/lkdtm: Use grep -E instead of egrep
selftests/lkdtm: Don't clear dmesg when running tests
selftests/ftrace: mark irqsoff_tracer.tc test as unresolved if the test module does not exist
tools/testing: Replace zero-length array with flexible-array
kselftests: dmabuf-heaps: Fix confused return value on expected error testing
This consists of a handful of build fixes, all found by Huawei's autobuilder.
None of these patches should have any functional impact on kernels that build,
and they're mostly related to various features intermingling with !MMU. While
some of these might be better hoisted to generic code, it seems better to have
the simple fixes in the meanwhile.
As far as I know these are the only outstanding patches for 5.7.
-----BEGIN PGP SIGNATURE-----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=8koH
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"A handful of build fixes, all found by Huawei's autobuilder.
None of these patches should have any functional impact on kernels
that build, and they're mostly related to various features
intermingling with !MMU.
While some of these might be better hoisted to generic code, it seems
better to have the simple fixes in the meanwhile.
As far as I know these are the only outstanding patches for 5.7"
* tag 'riscv-for-linus-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: mmiowb: Fix implicit declaration of function 'smp_processor_id'
riscv: pgtable: Fix __kernel_map_pages build error if NOMMU
riscv: Make SYS_SUPPORTS_HUGETLBFS depends on MMU
riscv: Disable ARCH_HAS_DEBUG_VIRTUAL if NOMMU
riscv: Add pgprot_writecombine/device and PAGE_SHARED defination if NOMMU
riscv: stacktrace: Fix undefined reference to `walk_stackframe'
riscv: Fix unmet direct dependencies built based on SOC_VIRT
riscv: perf: RISCV_BASE_PMU should be independent
riscv: perf_event: Make some funciton static
Paolo Abeni says:
====================
mptcp: fix MP_JOIN failure handling
Currently if we hit an MP_JOIN failure on the third ack, the child socket is
closed with reset, but the request socket is not deleted, causing weird
behaviors.
The main problem is that MPTCP's MP_JOIN code needs to plug it's own
'valid 3rd ack' checks and the current TCP callbacks do not allow that.
This series tries to address the above shortcoming introducing a new MPTCP
specific bit in a 'struct tcp_request_sock' hole, and leveraging that to allow
tcp_check_req releasing the request socket when needed.
The above allows cleaning-up a bit current MPTCP hooking in tcp_check_req().
An alternative solution, possibly cleaner but more invasive, would be
changing the 'bool *own_req' syn_recv_sock() argument into 'int *req_status'
and let MPTCP set it to 'REQ_DROP'.
v1 -> v2:
- be more conservative about drop_req initialization
RFC -> v1:
- move the drop_req bit inside tcp_request_sock (Eric)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, on MP_JOIN failure we reset the child
socket, but leave the request socket untouched.
tcp_check_req will deal with it according to the
'tcp_abort_on_overflow' sysctl value - by default the
req socket will stay alive.
The above leads to inconsistent behavior on MP JOIN
failure, and bad listener overflow accounting.
This patch addresses the issue leveraging the infrastructure
just introduced to ask the TCP stack to drop the req on
failure.
The child socket is not freed anymore by subflow_syn_recv_sock(),
instead it's moved to a dead state and will be disposed by the
next sock_put done by the TCP stack, so that listener overflow
accounting is not affected by MP JOIN failure.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the steps to prepare an inet_connection_sock for
forced disposal inside a separate helper. No functional
changes inteded, this will just simplify the next patch.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MP_JOIN subflows must not land into the accept queue.
Currently tcp_check_req() calls an mptcp specific helper
to detect such scenario.
Such helper leverages the subflow context to check for
MP_JOIN subflows. We need to deal also with MP JOIN
failures, even when the subflow context is not available
due allocation failure.
A possible solution would be changing the syn_recv_sock()
signature to allow returning a more descriptive action/
error code and deal with that in tcp_check_req().
Since the above need is MPTCP specific, this patch instead
uses a TCP request socket hole to add a MPTCP specific flag.
Such flag is used by the MPTCP syn_recv_sock() to tell
tcp_check_req() how to deal with the request socket.
This change is a no-op for !MPTCP build, and makes the
MPTCP code simpler. It allows also the next patch to deal
correctly with MP JOIN failure.
v1 -> v2:
- be more conservative on drop_req initialization (Mat)
RFC -> v1:
- move the drop_req bit inside tcp_request_sock (Eric)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
address rather than size.
-----BEGIN PGP SIGNATURE-----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=BoxO
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix flush_icache_range() second argument in machine_kexec() to be an
address rather than size"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: fix the flush_icache_range arguments in machine_kexec
A typical 100Base-T1 link should be always connected. If the link is in
a shot or open state, it is a failure. In most cases, we won't be able
to automatically handle this issue, but we need to log it or notify user
(if possible).
With this patch, the cable will be tested on "ip l s dev .. up" attempt
and send ethnl notification to the user space.
This patch was tested with TJA1102 PHY and "ethtool --monitor" command.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf 2020-05-15
The following pull-request contains BPF updates for your *net* tree.
We've added 9 non-merge commits during the last 2 day(s) which contain
a total of 14 files changed, 137 insertions(+), 43 deletions(-).
The main changes are:
1) Fix secid_to_secctx LSM hook default value, from Anders.
2) Fix bug in mmap of bpf array, from Andrii.
3) Restrict bpf_probe_read to archs where they work, from Daniel.
4) Enforce returning 0 for fentry/fexit progs, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The BCM54811 PHY shares many similarities with the already supported BCM54810
PHY but additionally requires some semi-unique configuration.
Signed-off-by: Kevin Lo <kevlo@kevlo.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy says:
====================
cxgb4: improve and tune TC-MQPRIO offload
Patch 1 improves the Tx path's credit request and recovery mechanism
when running under heavy load.
Patch 2 adds ability to tune the burst buffer sizes of all traffic
classes to improve performance for <= 1500 MTU, under heavy load.
Patch 3 adds support to track EOTIDs and dump software queue
contexts used by TC-MQPRIO offload.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Rework and add support for dumping EOTID software context used by
TC-MQPRIO. Also track number of EOTIDs in use.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For each traffic class, firmware handles up to 4 * MTU amount of data
per burst cycle. Under heavy load, this small buffer size is a
bottleneck when buffering large TSO packets in <= 1500 MTU case.
Increase the burst buffer size to 8 * MTU when supported.
Also, keep the driver's traffic class configuration API similar to
the firmware API counterpart.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Request credit update for every half credits consumed, including
the current request. Also, avoid re-trying to post packets when there
are no credits left. The credit update reply via interrupt will
eventually restore the credits and will invoke the Tx path again.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-05-15
The following pull-request contains BPF updates for your *net-next* tree.
We've added 37 non-merge commits during the last 1 day(s) which contain
a total of 67 files changed, 741 insertions(+), 252 deletions(-).
The main changes are:
1) bpf_xdp_adjust_tail() now allows to grow the tail as well, from Jesper.
2) bpftool can probe CONFIG_HZ, from Daniel.
3) CAP_BPF is introduced to isolate user processes that use BPF infra and
to secure BPF networking services by dropping CAP_SYS_ADMIN requirement
in certain cases, from Alexei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow DSA to add VLAN entries even if VLAN filtering is disabled, so
enabling it will not block the traffic of existent ports in the bridge
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov says:
====================
Implement classifier-action terse dump mode
Output rate of current upstream kernel TC filter dump implementation if
relatively low (~100k rules/sec depending on configuration). This
constraint impacts performance of software switch implementation that
rely on TC for their datapath implementation and periodically call TC
filter dump to update rules stats. Moreover, TC filter dump output a lot
of static data that don't change during the filter lifecycle (filter
key, specific action details, etc.) which constitutes significant
portion of payload on resulting netlink packets and increases amount of
syscalls necessary to dump all filters on particular Qdisc. In order to
significantly improve filter dump rate this patch sets implement new
mode of TC filter dump operation named "terse dump" mode. In this mode
only parameters necessary to identify the filter (handle, action cookie,
etc.) and data that can change during filter lifecycle (filter flags,
action stats, etc.) are preserved in dump output while everything else
is omitted.
Userspace API is implemented using new TCA_DUMP_FLAGS tlv with only
available flag value TCA_DUMP_FLAGS_TERSE. Internally, new API requires
individual classifier support (new tcf_proto_ops->terse_dump()
callback). Support for action terse dump is implemented in act API and
don't require changing individual action implementations.
The following table provides performance comparison between regular
filter dump and new terse dump mode for two classifier-action profiles:
one minimal config with L2 flower classifier and single gact action and
another heavier config with L2+5tuple flower classifier with
tunnel_key+mirred actions.
Classifier-action type | dump | terse dump | X improvement
| (rules/sec) | (rules/sec) |
-----------------------------+-------------+-------------+---------------
L2 with gact | 141.8 | 293.2 | 2.07
L2+5tuple tunnel_key+mirred | 76.4 | 198.8 | 2.60
Benchmark details: to measure the rate tc filter dump and terse dump
commands are invoked on ingress Qdisc that have one million filters
configured using following commands.
> time sudo tc -s filter show dev ens1f0 ingress >/dev/null
> time sudo tc -s filter show terse dev ens1f0 ingress >/dev/null
Value in results table is calculated by dividing 1000000 total rules by
"real" time reported by time command.
Setup details: 2x Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 32GB memory
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
"$err" is a variable pointing to a temp file. "$out" is not: only used
as a local variable in "check()" and representing the output of a
command line.
Fixes: eedbc68532 (selftests: add PM netlink functional tests)
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Depending on the WRIOP version, the buffer size on the RX path must by a
multiple of 64 or 256. Handle this restriction properly by aligning down
the buffer size to the necessary value. Also, use the new buffer size
dynamically computed instead of the compile time one.
Fixes: 27c874867c ("dpaa2-eth: Use a single page per Rx buffer")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement two basic tests to verify terse dump functionality of flower
classifier:
- Test that verifies that terse dump works.
- Test that verifies that terse dump doesn't print filter key.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement tcf_proto_ops->terse_dump() callback for flower classifier. Only
dump handle, flags and action data in terse mode.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend tcf_action_dump() with boolean argument 'terse' that is used to
request terse-mode action dump. In terse mode only essential data needed to
identify particular action (action kind, cookie, etc.) and its stats is put
to resulting skb and everything else is omitted. Implement
tcf_exts_terse_dump() helper in cls API that is intended to be used to
request terse dump of all exts (actions) attached to the filter.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add new TCA_DUMP_FLAGS attribute and use it in cls API to request terse
filter output from classifiers with TCA_DUMP_FLAGS_TERSE flag. This option
is intended to be used to improve performance of TC filter dump when
userland only needs to obtain stats and not the whole classifier/action
data. Extend struct tcf_proto_ops with new terse_dump() callback that must
be defined by supporting classifier implementations.
Support of the options in specific classifiers and actions is
implemented in following patches in the series.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The assumption that a device node is associated either with the
netdev's device, or the parent of that device, does not hold for all
drivers. E.g. Freescale's DPAA has two layers of platform devices
above the netdev. Instead, recursively walk up the tree from the
netdev, allowing any parent to match against the sought after node.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix ADC access synchronization problem with da9052 driver
Fix temperature limit and status reporting in nct7904 driver
Fix drivetemp temperature reporting if SCT is supported
but SCT data tables are not.
-----BEGIN PGP SIGNATURE-----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=YCH3
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix ADC access synchronization problem with da9052 driver
- Fix temperature limit and status reporting in nct7904 driver
- Fix drivetemp temperature reporting if SCT is supported but SCT data
tables are not.
* tag 'hwmon-for-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (da9052) Synchronize access with mfd
hwmon: (nct7904) Fix incorrect range of temperature limit registers
hwmon: (nct7904) Read all SMI status registers in probe function
hwmon: (drivetemp) Fix SCT support if SCT data tables are not supported
The things look good and calming down; the only change to ALSA core
is the fix for racy rawmidi buffer accesses spotted by syzkaller,
and the rest are all small device-specific quirks for HD-audio and
USB-audio devices.
-----BEGIN PGP SIGNATURE-----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=HlsV
-----END PGP SIGNATURE-----
Merge tag 'sound-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Things look good and calming down; the only change to ALSA core is the
fix for racy rawmidi buffer accesses spotted by syzkaller, and the
rest are all small device-specific quirks for HD-audio and USB-audio
devices"
* tag 'sound-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Limit int mic boost for Thinkpad T530
ALSA: hda/realtek - Add COEF workaround for ASUS ZenBook UX431DA
ALSA: hda/realtek: Enable headset mic of ASUS UX581LV with ALC295
ALSA: hda/realtek - Enable headset mic of ASUS UX550GE with ALC295
ALSA: hda/realtek - Enable headset mic of ASUS GL503VM with ALC295
ALSA: hda/realtek: Add quirk for Samsung Notebook
ALSA: rawmidi: Fix racy buffer resize under concurrent accesses
ALSA: usb-audio: add mapping for ASRock TRX40 Creator
ALSA: hda/realtek - Fix S3 pop noise on Dell Wyse
Revert "ALSA: hda/realtek: Fix pop noise on ALC225"
ALSA: firewire-lib: fix 'function sizeof not defined' error of tracepoints format
ALSA: usb-audio: Add control message quirk delay for Kingston HyperX headset
i915 (two weeks):
- Handle idling during i915_gem_evict_something busy loops (Chris)
- Mark current submissions with a weak-dependency (Chris)
- Propagate error from completed fences (Chris)
- Fixes on execlist to avoid GPU hang situation (Chris)
- Fixes couple deadlocks (Chris)
- Timeslice preemption fixes (Chris)
- Fix Display Port interrupt handling on Tiger Lake (Imre)
- Reduce debug noise around Frame Buffer Compression (Peter)
- Fix logic around IPC W/a for Coffee Lake and Kaby Lake (Sultan)
- Avoid dereferencing a dead context (Chris)
tegra:
- tegra120/4 smmu fixes
amdgpu:
- Clockgating fixes
- Fix fbdev with scatter/gather display
- S4 fix for navi
- Soft recovery for gfx10
- Freesync fixes
- Atomic check cursor fix
- Add a gfxoff quirk
- MST fix
amdkfd:
- Fix GEM reference counting
meson:
- error code propogation fix
-----BEGIN PGP SIGNATURE-----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=b/ek
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2020-05-15' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"As mentioned last week an i915 PR came in late, but I left it, so the
i915 bits of this cover 2 weeks, which is why it's likely a bit larger
than usual.
Otherwise it's mostly amdgpu fixes, one tegra fix, one meson fix.
i915:
- Handle idling during i915_gem_evict_something busy loops (Chris)
- Mark current submissions with a weak-dependency (Chris)
- Propagate error from completed fences (Chris)
- Fixes on execlist to avoid GPU hang situation (Chris)
- Fixes couple deadlocks (Chris)
- Timeslice preemption fixes (Chris)
- Fix Display Port interrupt handling on Tiger Lake (Imre)
- Reduce debug noise around Frame Buffer Compression (Peter)
- Fix logic around IPC W/a for Coffee Lake and Kaby Lake (Sultan)
- Avoid dereferencing a dead context (Chris)
tegra:
- tegra120/4 smmu fixes
amdgpu:
- Clockgating fixes
- Fix fbdev with scatter/gather display
- S4 fix for navi
- Soft recovery for gfx10
- Freesync fixes
- Atomic check cursor fix
- Add a gfxoff quirk
- MST fix
amdkfd:
- Fix GEM reference counting
meson:
- error code propogation fix"
* tag 'drm-fixes-2020-05-15' of git://anongit.freedesktop.org/drm/drm: (29 commits)
drm/i915: Handle idling during i915_gem_evict_something busy loops
drm/meson: pm resume add return errno branch
drm/amd/amdgpu: Update update_config() logic
drm/amd/amdgpu: add raven1 part to the gfxoff quirk list
drm/i915: Mark concurrent submissions with a weak-dependency
drm/i915: Propagate error from completed fences
drm/i915/gvt: Fix kernel oops for 3-level ppgtt guest
drm/i915/gvt: Init DPLL/DDI vreg for virtual display instead of inheritance.
drm/amd/display: add basic atomic check for cursor plane
drm/amd/display: Fix vblank and pageflip event handling for FreeSync
drm/amdgpu: implement soft_recovery for gfx10
drm/amdgpu: enable hibernate support on Navi1X
drm/amdgpu: Use GEM obj reference for KFD BOs
drm/amdgpu: force fbdev into vram
drm/amd/powerplay: perform PG ungate prior to CG ungate
drm/amdgpu: drop unnecessary cancel_delayed_work_sync on PG ungate
drm/amdgpu: disable MGCG/MGLS also on gfx CG ungate
drm/i915/execlists: Track inflight CCID
drm/i915/execlists: Avoid reusing the same logical CCID
drm/i915/gem: Remove object_is_locked assertion from unpin_from_display_plane
...
Alexei Starovoitov says:
====================
v6->v7:
- permit SK_REUSEPORT program type under CAP_BPF as suggested by Marek Majkowski.
It's equivalent to SOCKET_FILTER which is unpriv.
v5->v6:
- split allow_ptr_leaks into four flags.
- retain bpf_jit_limit under cap_sys_admin.
- fixed few other issues spotted by Daniel.
v4->v5:
Split BPF operations that are allowed under CAP_SYS_ADMIN into combination of
CAP_BPF, CAP_PERFMON, CAP_NET_ADMIN and keep some of them under CAP_SYS_ADMIN.
The user process has to have
- CAP_BPF to create maps, do other sys_bpf() commands and load SK_REUSEPORT progs.
Note: dev_map, sock_hash, sock_map map types still require CAP_NET_ADMIN.
That could be relaxed in the future.
- CAP_BPF and CAP_PERFMON to load tracing programs.
- CAP_BPF and CAP_NET_ADMIN to load networking programs.
(or CAP_SYS_ADMIN for backward compatibility).
CAP_BPF solves three main goals:
1. provides isolation to user space processes that drop CAP_SYS_ADMIN and switch to CAP_BPF.
More on this below. This is the major difference vs v4 set back from Sep 2019.
2. makes networking BPF progs more secure, since CAP_BPF + CAP_NET_ADMIN
prevents pointer leaks and arbitrary kernel memory access.
3. enables fuzzers to exercise all of the verifier logic. Eventually finding bugs
and making BPF infra more secure. Currently fuzzers run in unpriv.
They will be able to run with CAP_BPF.
The patchset is long overdue follow-up from the last plumbers conference.
Comparing to what was discussed at LPC the CAP* checks at attach time are gone.
For tracing progs the CAP_SYS_ADMIN check was done at load time only. There was
no check at attach time. For networking and cgroup progs CAP_SYS_ADMIN was
required at load time and CAP_NET_ADMIN at attach time, but there are several
ways to bypass CAP_NET_ADMIN:
- if networking prog is using tail_call writing FD into prog_array will
effectively attach it, but bpf_map_update_elem is an unprivileged operation.
- freplace prog with CAP_SYS_ADMIN can replace networking prog
Consolidating all CAP checks at load time makes security model similar to
open() syscall. Once the user got an FD it can do everything with it.
read/write/poll don't check permissions. The same way when bpf_prog_load
command returns an FD the user can do everything (including attaching,
detaching, and bpf_test_run).
The important design decision is to allow ID->FD transition for
CAP_SYS_ADMIN only. What it means that user processes can run
with CAP_BPF and CAP_NET_ADMIN and they will not be able to affect each
other unless they pass FDs via scm_rights or via pinning in bpffs.
ID->FD is a mechanism for human override and introspection.
An admin can do 'sudo bpftool prog ...'. It's possible to enforce via LSM that
only bpftool binary does bpf syscall with CAP_SYS_ADMIN and the rest of user
space processes do bpf syscall with CAP_BPF isolating bpf objects (progs, maps,
links) that are owned by such processes from each other.
Another significant change from LPC is that the verifier checks are split into
four flags. The allow_ptr_leaks flag allows pointer manipulations. The
bpf_capable flag enables all modern verifier features like bpf-to-bpf calls,
BTF, bounded loops, dead code elimination, etc. All the goodness. The
bypass_spec_v1 flag enables indirect stack access from bpf programs and
disables speculative analysis and bpf array mitigations. The bypass_spec_v4
flag disables store sanitation. That allows networking progs with CAP_BPF +
CAP_NET_ADMIN enjoy modern verifier features while being more secure.
Some networking progs may need CAP_BPF + CAP_NET_ADMIN + CAP_PERFMON,
since subtracting pointers (like skb->data_end - skb->data) is a pointer leak,
but the verifier may get smarter in the future.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Implement permissions as stated in uapi/linux/capability.h
In order to do that the verifier allow_ptr_leaks flag is split
into four flags and they are set as:
env->allow_ptr_leaks = bpf_allow_ptr_leaks();
env->bypass_spec_v1 = bpf_bypass_spec_v1();
env->bypass_spec_v4 = bpf_bypass_spec_v4();
env->bpf_capable = bpf_capable();
The first three currently equivalent to perfmon_capable(), since leaking kernel
pointers and reading kernel memory via side channel attacks is roughly
equivalent to reading kernel memory with cap_perfmon.
'bpf_capable' enables bounded loops, precision tracking, bpf to bpf calls and
other verifier features. 'allow_ptr_leaks' enable ptr leaks, ptr conversions,
subtraction of pointers. 'bypass_spec_v1' disables speculative analysis in the
verifier, run time mitigations in bpf array, and enables indirect variable
access in bpf programs. 'bypass_spec_v4' disables emission of sanitation code
by the verifier.
That means that the networking BPF program loaded with CAP_BPF + CAP_NET_ADMIN
will have speculative checks done by the verifier and other spectre mitigation
applied. Such networking BPF program will not be able to leak kernel pointers
and will not be able to access arbitrary kernel memory.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200513230355.7858-3-alexei.starovoitov@gmail.com
Split BPF operations that are allowed under CAP_SYS_ADMIN into
combination of CAP_BPF, CAP_PERFMON, CAP_NET_ADMIN.
For backward compatibility include them in CAP_SYS_ADMIN as well.
The end result provides simple safety model for applications that use BPF:
- to load tracing program types
BPF_PROG_TYPE_{KPROBE, TRACEPOINT, PERF_EVENT, RAW_TRACEPOINT, etc}
use CAP_BPF and CAP_PERFMON
- to load networking program types
BPF_PROG_TYPE_{SCHED_CLS, XDP, SK_SKB, etc}
use CAP_BPF and CAP_NET_ADMIN
There are few exceptions from this rule:
- bpf_trace_printk() is allowed in networking programs, but it's using
tracing mechanism, hence this helper needs additional CAP_PERFMON
if networking program is using this helper.
- BPF_F_ZERO_SEED flag for hash/lru map is allowed under CAP_SYS_ADMIN only
to discourage production use.
- BPF HW offload is allowed under CAP_SYS_ADMIN.
- bpf_probe_write_user() is allowed under CAP_SYS_ADMIN only.
CAPs are not checked at attach/detach time with two exceptions:
- loading BPF_PROG_TYPE_CGROUP_SKB is allowed for unprivileged users,
hence CAP_NET_ADMIN is required at attach time.
- flow_dissector detach doesn't check prog FD at detach,
hence CAP_NET_ADMIN is required at detach time.
CAP_SYS_ADMIN is required to iterate BPF objects (progs, maps, links) via get_next_id
command and convert them to file descriptor via GET_FD_BY_ID command.
This restriction guarantees that mutliple tasks with CAP_BPF are not able to
affect each other. That leads to clean isolation of tasks. For example:
task A with CAP_BPF and CAP_NET_ADMIN loads and attaches a firewall via bpf_link.
task B with the same capabilities cannot detach that firewall unless
task A explicitly passed link FD to task B via scm_rights or bpffs.
CAP_SYS_ADMIN can still detach/unload everything.
Two networking user apps with CAP_SYS_ADMIN and CAP_NET_ADMIN can
accidentely mess with each other programs and maps.
Two networking user apps with CAP_NET_ADMIN and CAP_BPF cannot affect each other.
CAP_NET_ADMIN + CAP_BPF allows networking programs access only packet data.
Such networking progs cannot access arbitrary kernel memory or leak pointers.
bpftool, bpftrace, bcc tools binaries should NOT be installed with
CAP_BPF and CAP_PERFMON, since unpriv users will be able to read kernel secrets.
But users with these two permissions will be able to use these tracing tools.
CAP_PERFMON is least secure, since it allows kprobes and kernel memory access.
CAP_NET_ADMIN can stop network traffic via iproute2.
CAP_BPF is the safest from security point of view and harmless on its own.
Having CAP_BPF and/or CAP_NET_ADMIN is not enough to write into arbitrary map
and if that map is used by firewall-like bpf prog.
CAP_BPF allows many bpf prog_load commands in parallel. The verifier
may consume large amount of memory and significantly slow down the system.
Existing unprivileged BPF operations are not affected.
In particular unprivileged users are allowed to load socket_filter and cg_skb
program types and to create array, hash, prog_array, map-in-map map types.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200513230355.7858-2-alexei.starovoitov@gmail.com
Daniel T. Lee