Pull input layer fixes from Dmitry Torokhov:
"Just a few fixups to a couple of drivers"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elan_i2c - ignore signals when finishing updating firmware
Input: elan_i2c - clear INT before resetting controller
Input: atmel_mxt_ts - add T100 as a readable object
Input: edt-ft5x06 - increase allowed data range for threshold parameter
If TRIM_UNUSED_KSYMS is enabled, all unneeded exported symbols are made
unexported. Two-pass build of the kernel is done to find out which
symbols are needed based on a configuration. This effectively
complicates things for out-of-tree modules.
Livepatch exports functions to (un)register and enable/disable a live
patch. The only in-tree module which uses these functions is a sample in
samples/livepatch/. If the sample is disabled, the functions are
trimmed and out-of-tree live patches cannot be built.
Note that live patches are intended to be built out-of-tree.
Suggested-by: Michal Marek <mmarek@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Jessica Yu <jeyu@redhat.com>
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
mpage_submit_page() can race with another process growing i_size and
writing data via mmap to the written-back page. As mpage_submit_page()
samples i_size too early, it may happen that ext4_bio_write_page()
zeroes out too large tail of the page and thus corrupts user data.
Fix the problem by sampling i_size only after the page has been
write-protected in page tables by clear_page_dirty_for_io() call.
Reported-by: Michael Zimmer <michael@swarm64.com>
CC: stable@vger.kernel.org
Fixes: cb20d51883
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When ext4_map_blocks() is called with EXT4_GET_BLOCKS_ZERO to zero-out
allocated blocks and these blocks are actually converted from unwritten
extent the following race can happen:
CPU0 CPU1
page fault page fault
... ...
ext4_map_blocks()
ext4_ext_map_blocks()
ext4_ext_handle_unwritten_extents()
ext4_ext_convert_to_initialized()
- zero out converted extent
ext4_zeroout_es()
- inserts extent as initialized in status tree
ext4_map_blocks()
ext4_es_lookup_extent()
- finds initialized extent
write data
ext4_issue_zeroout()
- zeroes out new extent overwriting data
This problem can be reproduced by generic/340 for the fallocated case
for the last block in the file.
Fix the problem by avoiding zeroing out the area we are mapping with
ext4_map_blocks() in ext4_ext_convert_to_initialized(). It is pointless
to zero out this area in the first place as the caller asked us to
convert the area to initialized because he is just going to write data
there before the transaction finishes. To achieve this we delete the
special case of zeroing out full extent as that will be handled by the
cases below zeroing only the part of the extent that needs it. We also
instruct ext4_split_extent() that the middle of extent being split
contains data so that ext4_split_extent_at() cannot zero out full extent
in case of ENOSPC.
CC: stable@vger.kernel.org
Fixes: 12735f8819
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=EtW3
-----END PGP SIGNATURE-----
Merge tag 'led_fixes_for_4-12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED fix from Jacek Anaszewski:
"A single LED fix for 4.12-rc3.
leds-pca955x driver uses only i2c_smbus API and thus it should pass
I2C_FUNC_SMBUS_BYTE_DATA flag to i2c_check_functionality"
* tag 'led_fixes_for_4-12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: pca955x: Correct I2C Functionality
Pull networking fixes from David Miller:
1) Fix state pruning in bpf verifier wrt. alignment, from Daniel
Borkmann.
2) Handle non-linear SKBs properly in SCTP ICMP parsing, from Davide
Caratti.
3) Fix bit field definitions for rss_hash_type of descriptors in mlx5
driver, from Jesper Brouer.
4) Defer slave->link updates until bonding is ready to do a full commit
to the new settings, from Nithin Sujir.
5) Properly reference count ipv4 FIB metrics to avoid use after free
situations, from Eric Dumazet and several others including Cong Wang
and Julian Anastasov.
6) Fix races in llc_ui_bind(), from Lin Zhang.
7) Fix regression of ESP UDP encapsulation for TCP packets, from
Steffen Klassert.
8) Fix mdio-octeon driver Kconfig deps, from Randy Dunlap.
9) Fix regression in setting DSCP on ipv6/GRE encapsulation, from Peter
Dawson.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
ipv4: add reference counting to metrics
net: ethernet: ax88796: don't call free_irq without request_irq first
ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets
sctp: fix ICMP processing if skb is non-linear
net: llc: add lock_sock in llc_ui_bind to avoid a race condition
bonding: Don't update slave->link until ready to commit
test_bpf: Add a couple of tests for BPF_JSGE.
bpf: add various verifier test cases
bpf: fix wrong exposure of map_flags into fdinfo for lpm
bpf: add bpf_clone_redirect to bpf_helper_changes_pkt_data
bpf: properly reset caller saved regs after helper call and ld_abs/ind
bpf: fix incorrect pruning decision when alignment must be tracked
arp: fixed -Wuninitialized compiler warning
tcp: avoid fastopen API to be used on AF_UNSPEC
net: move somaxconn init from sysctl code
net: fix potential null pointer dereference
geneve: fix fill_info when using collect_metadata
virtio-net: enable TSO/checksum offloads for Q-in-Q vlans
be2net: Fix offload features for Q-in-Q packets
vlan: Fix tcp checksum offloads in Q-in-Q vlans
...
- Fix indlen block reservation accounting bug when splitting delalloc extent
- Fix warnings about unused variables that appeared in -rc1.
- Don't spew errors when bmapping a local format directory
- Fix an off-by-one error in a delalloc eof assertion
- Make fsmap only return inode information for CAP_SYS_ADMIN
- Fix a potential mount time deadlock recovering cow extents
- Fix unaligned memory access in _btree_visit_blocks
- Fix various SEEK_HOLE/SEEK_DATA bugs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pDjl
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.12-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull XFS fixes from Darrick Wong:
"A few miscellaneous bug fixes & cleanups:
- Fix indlen block reservation accounting bug when splitting delalloc
extent
- Fix warnings about unused variables that appeared in -rc1.
- Don't spew errors when bmapping a local format directory
- Fix an off-by-one error in a delalloc eof assertion
- Make fsmap only return inode information for CAP_SYS_ADMIN
- Fix a potential mount time deadlock recovering cow extents
- Fix unaligned memory access in _btree_visit_blocks
- Fix various SEEK_HOLE/SEEK_DATA bugs"
* tag 'xfs-4.12-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Move handling of missing page into one place in xfs_find_get_desired_pgoff()
xfs: Fix off-by-in in loop termination in xfs_find_get_desired_pgoff()
xfs: Fix missed holes in SEEK_HOLE implementation
xfs: fix off-by-one on max nr_pages in xfs_find_get_desired_pgoff()
xfs: fix unaligned access in xfs_btree_visit_blocks
xfs: avoid mount-time deadlock in CoW extent recovery
xfs: only return detailed fsmap info if the caller has CAP_SYS_ADMIN
xfs: bad assertion for delalloc an extent that start at i_size
xfs: fix warnings about unused stack variables
xfs: BMAPX shouldn't barf on inline-format directories
xfs: fix indlen accounting error on partial delalloc conversion
Andrey Konovalov reported crashes in ipv4_mtu()
I could reproduce the issue with KASAN kernels, between
10.246.7.151 and 10.246.7.152 :
1) 20 concurrent netperf -t TCP_RR -H 10.246.7.152 -l 1000 &
2) At the same time run following loop :
while :
do
ip ro add 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500
ip ro del 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500
done
Cong Wang attempted to add back rt->fi in commit
82486aa6f1 ("ipv4: restore rt->fi for reference counting")
but this proved to add some issues that were complex to solve.
Instead, I suggested to add a refcount to the metrics themselves,
being a standalone object (in particular, no reference to other objects)
I tried to make this patch as small as possible to ease its backport,
instead of being super clean. Note that we believe that only ipv4 dst
need to take care of the metric refcount. But if this is wrong,
this patch adds the basic infrastructure to extend this to other
families.
Many thanks to Julian Anastasov for reviewing this patch, and Cong Wang
for his efforts on this problem.
Fixes: 2860583fe8 ("ipv4: Kill rt->fi")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function ax_init_dev (which is called only from the driver's .probe
function) calls free_irq in the error path without having requested the
irq in the first place. So drop the free_irq call in the error path.
Fixes: 825a2ff189 ("AX88796 network driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fix addresses two problems in the way the DSCP field is formulated
on the encapsulating header of IPv6 tunnels.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195661
1) The IPv6 tunneling code was manipulating the DSCP field of the
encapsulating packet using the 32b flowlabel. Since the flowlabel is
only the lower 20b it was incorrect to assume that the upper 12b
containing the DSCP and ECN fields would remain intact when formulating
the encapsulating header. This fix handles the 'inherit' and
'fixed-value' DSCP cases explicitly using the extant dsfield u8 variable.
2) The use of INET_ECN_encapsulate(0, dsfield) in ip6_tnl_xmit was
incorrect and resulted in the DSCP value always being set to 0.
Commit 90427ef5d2 ("ipv6: fix flow labels when the traffic class
is non-0") caused the regression by masking out the flowlabel
which exposed the incorrect handling of the DSCP portion of the
flowlabel in ip6_tunnel and ip6_gre.
Fixes: 90427ef5d2 ("ipv6: fix flow labels when the traffic class is non-0")
Signed-off-by: Peter Dawson <peter.a.dawson@boeing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SPARC M6-32 platform has (2^5) NUMA nodes, so need to bump up the
CONFIG_NODES_SHIFT to 5.
Orabug: 25577754
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Atish Patra <atish.patra@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sometimes ICMP replies to INIT chunks are ignored by the client, even if
the encapsulated SCTP headers match an open socket. This happens when the
ICMP packet is carried by a paged skb: use skb_header_pointer() to read
packet contents beyond the SCTP header, so that chunk header and initiate
tag are validated correctly.
v2:
- don't use skb_header_pointer() to read the transport header, since
icmp_socket_deliver() already puts these 8 bytes in the linear area.
- change commit message to make specific reference to INIT chunks.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a race condition in llc_ui_bind if two or more processes/threads
try to bind a same socket.
If more processes/threads bind a same socket success that will lead to
two problems, one is this action is not what we expected, another is
will lead to kernel in unstable status or oops(in my simple test case,
cause llc2.ko can't unload).
The current code is test SOCK_ZAPPED bit to avoid a process to
bind a same socket twice but that is can't avoid more processes/threads
try to bind a same socket at the same time.
So, add lock_sock in llc_ui_bind like others, such as llc_ui_connect.
Signed-off-by: Lin Zhang <xiaolou4617@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull block fixes from Jens Axboe:
"A collection of fixes that should go into this series. This contains:
- A set of NVMe fixes, pulled from Christoph. This includes a set of
fixes for the fiber channel bits from James Smart, rdma queue depth
fix from Marta, controller removal fixes from Ming, and some more
APST quirk updates from Andy.
- A blk-mq debugfs fix from Bart, fixing a problem with the
untangling of the sysfs and debugfs blk-mq bits that was added in
this series.
- Error code fix in add_partition() from Dan.
- A small series of fixes for the new blk-throttle code from Shaohua"
* 'for-linus' of git://git.kernel.dk/linux-block: (21 commits)
blk-mq: Only register debugfs attributes for blk-mq queues
nvme: Quirk APST on Intel 600P/P3100 devices
nvme: only setup block integrity if supported by the driver
nvme: replace is_flags field in nvme_ctrl_ops with a flags field
nvme-pci: consistencly use ctrl->device for logging
partitions/msdos: FreeBSD UFS2 file systems are not recognized
block: fix an error code in add_partition()
blk-throttle: force user to configure all settings for io.low
blk-throttle: respect 0 bps/iops settings for io.low
blk-throttle: output some debug info in trace
blk-throttle: add hierarchy support for latency target and idle time
nvme_fc: remove extra controller reference taken on reconnect
nvme_fc: correct nvme status set on abort
nvme_fc: set logging level on resets/deletes
nvme_fc: revise comment on teardown
nvme_fc: Support ctrl_loss_tmo
nvme_fc: get rid of local reconnect_delay
blk-mq: remove blk_mq_abort_requeue_list()
nvme: avoid to use blk_mq_abort_requeue_list()
nvme: use blk_mq_start_hw_queues() in nvme_kill_queues()
...
messenger patch from Zheng and Luis' fallocate fix.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJZKD/7AAoJEEp/3jgCEfOLu6sIAKEvmDAZxkRiIV9HF36+0jLO
947jIV22sb4FjngcMs0eBdFD4IJrL8QPq1UVYjIyHtnJN4Tbp9VDPfjyWArhr7+k
hjfTcgnTStmwFy1bUXSq7xNusg9qm0Mw5zpY1DJLCdvkwIU0yrN9zusTlIQvlV5G
Kg4Mzvc3EaL/VgUcsGI2lKuVlMt95wb5u1YGt5AG9FjLv1BTBhpX+3/swtvmtzy3
ZpxyujS4YH+RBpHr9AI/+5IJ2xumZB0C6hzOoa/DAyGzjUH7MQJEuD8hjXqMOWQy
L1wqZo7gXrIk3NSEjxrCb7/mE0S915jkKyHjoJbUxBhy1zEZmri9AfEwe9isb0M=
=enjn
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.12-rc3' of git://github.com/ceph/ceph-client
Pul ceph fixes from Ilya Dryomov:
"A bunch of make W=1 and static checker fixups, a RECONNECT_SEQ
messenger patch from Zheng and Luis' fallocate fix"
* tag 'ceph-for-4.12-rc3' of git://github.com/ceph/ceph-client:
ceph: check that the new inode size is within limits in ceph_fallocate()
libceph: cleanup old messages according to reconnect seq
libceph: NULL deref on crush_decode() error path
libceph: fix error handling in process_one_ticket()
libceph: validate blob_struct_v in process_one_ticket()
libceph: drop version variable from ceph_monmap_decode()
libceph: make ceph_msg_data_advance() return void
libceph: use kbasename() and kill ceph_file_part()
Hikey board. Together with a couple of DTS updates for the Hikey board we have
also extended the mmc pwrseq_simple, to support a new power-off-delay-us DT
property, as that was required to enable a graceful power off sequence for the
WiFi chip.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ECeh
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"This contains fixes to make the WiFi work again for the ARM64 Hikey
board.
Together with a couple of DTS updates for the Hikey board we have also
extended the mmc pwrseq_simple, to support a new power-off-delay-us DT
property, as that was required to enable a graceful power off sequence
for the WiFi chip"
* tag 'mmc-v4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
arm64: dts: hikey: Fix WiFi support
arm64: dts: hi6220: Move board data from the dwmmc nodes to hikey dts
arm64: dts: hikey: Add the SYS_5V and the VDD_3V3 regulators
arm64: dts: hi6220: Move the fixed_5v_hub regulator to the hikey dts
arm64: dts: hikey: Add clock for the pmic mfd
mfd: dts: hi655x: Add clock binding for the pmic
mmc: pwrseq_simple: Parse DTS for the power-off-delay-us property
mmc: dt: pwrseq-simple: Invent power-off-delay-us
This contains a few HD-audio device-specific quirks and an endianess
fix for USB-audio, as well as the update of quirk model list
document. All fixes are small and trivial.
The document update could have been postponed, but it's a good thing
for user and has absolutely zero risk of breakage, so included here.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=L01h
-----END PGP SIGNATURE-----
Merge tag 'sound-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This contains a few HD-audio device-specific quirks and an endianess
fix for USB-audio, as well as the update of quirk model list document.
All fixes are small and trivial.
The document update could have been postponed, but it's a good thing
for user and has absolutely zero risk of breakage, so included here"
* tag 'sound-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - apply STAC_9200_DELL_M22 quirk for Dell Latitude D430
ALSA: hda - Update the list of quirk models
ALSA: hda - Provide dual-codecs model option for a few Realtek codecs
ALSA: hda - Apply dual-codec quirk for MSI Z270-Gaming mobo
ALSA: hda - No loopback on ALC299 codec
ALSA: usb-audio: fix Amanero Combo384 quirk on big-endian hosts
Intel SDM says, that at most one LAPIC should be configured with ExtINT
delivery. KVM configures all LAPICs this way. This causes pic_unlock()
to kick the first available vCPU from the internal KVM data structures.
If this vCPU is not the BSP, but some not-yet-booted AP, the BSP may
never realize that there is an interrupt.
Fix that by enabling ExtINT delivery only for the BSP.
This allows booting a Linux guest without a TSC in the above situation.
Otherwise the BSP gets stuck in calibrate_delay_converge().
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The decision whether or not to exit from L2 to L1 on an lmsw instruction is
based on bogus values: instead of using the information encoded within the
exit qualification, it uses the data also used for the mov-to-cr
instruction, which boils down to using whatever is in %eax at that point.
Use the correct values instead.
Without this fix, an L1 may not get notified when a 32-bit Linux L2
switches its secondary CPUs to protected mode; the L1 is only notified on
the next modification of CR0. This short time window poses a problem, when
there is some other reason to exit to L1 in between. Then, L2 will be
resumed in real mode and chaos ensues.
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=XRcK
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.12-rc3' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Not a whole lot happening here, a set of amdgpu fixes and one core
deadlock fix, and some misc drivers fixes"
* tag 'drm-fixes-for-v4.12-rc3' of git://people.freedesktop.org/~airlied/linux:
drm/amdgpu: fix null point error when rmmod amdgpu.
drm/amd/powerplay: fix a signedness bugs
drm/amdgpu: fix NULL pointer panic of emit_gds_switch
drm/radeon: Unbreak HPD handling for r600+
drm/amd/powerplay/smu7: disable mclk switching for high refresh rates
drm/amd/powerplay/smu7: add vblank check for mclk switching (v2)
drm/radeon/ci: disable mclk switching for high refresh rates (v2)
drm/amdgpu/ci: disable mclk switching for high refresh rates (v2)
drm/amdgpu: fix fundamental suspend/resume issue
drm/gma500/psb: Actually use VBT mode when it is found
drm: Fix deadlock retry loop in page_flip_ioctl
drm: qxl: Delay entering atomic context during cursor update
drm/radeon: Fix oops upon driver load on PowerXpress laptops
Preemption can occur during cancel preemption timer, and there will be
inconsistent status in lapic, vmx and vmcs field.
CPU0 CPU1
preemption timer vmexit
handle_preemption_timer(vCPU0)
kvm_lapic_expired_hv_timer
vmx_cancel_hv_timer
vmx->hv_deadline_tsc = -1
vmcs_clear_bits
/* hv_timer_in_use still true */
sched_out
sched_in
kvm_arch_vcpu_load
vmx_set_hv_timer
write vmx->hv_deadline_tsc
vmcs_set_bits
/* back in kvm_lapic_expired_hv_timer */
hv_timer_in_use = false
...
vmx_vcpu_run
vmx_arm_hv_run
write preemption timer deadline
spurious preemption timer vmexit
handle_preemption_timer(vCPU0)
kvm_lapic_expired_hv_timer
WARN_ON(!apic->lapic_timer.hv_timer_in_use);
This can be reproduced sporadically during boot of L2 on a
preemptible L1, causing a splat on L1.
WARNING: CPU: 3 PID: 1952 at arch/x86/kvm/lapic.c:1529 kvm_lapic_expired_hv_timer+0xb5/0xd0 [kvm]
CPU: 3 PID: 1952 Comm: qemu-system-x86 Not tainted 4.12.0-rc1+ #24 RIP: 0010:kvm_lapic_expired_hv_timer+0xb5/0xd0 [kvm]
Call Trace:
handle_preemption_timer+0xe/0x20 [kvm_intel]
vmx_handle_exit+0xc9/0x15f0 [kvm_intel]
? lock_acquire+0xdb/0x250
? lock_acquire+0xdb/0x250
? kvm_arch_vcpu_ioctl_run+0xdf3/0x1ce0 [kvm]
kvm_arch_vcpu_ioctl_run+0xe55/0x1ce0 [kvm]
kvm_vcpu_ioctl+0x384/0x7b0 [kvm]
? kvm_vcpu_ioctl+0x384/0x7b0 [kvm]
? __fget+0xf3/0x210
do_vfs_ioctl+0xa4/0x700
? __fget+0x114/0x210
SyS_ioctl+0x79/0x90
do_syscall_64+0x8f/0x750
? trace_hardirqs_on_thunk+0x1a/0x1c
entry_SYSCALL64_slow_path+0x25/0x25
This patch fixes it by disabling preemption while cancelling
preemption timer. This way cancel_hv_timer is atomic with
respect to kvm_arch_vcpu_load.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need to return an error for any call that asks for MSI / MSI-X
vectors only, so that non-trivial fallback logic can work properly.
Also valid dev->irq and use the "correct" errno value based on feedback
from Linus.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Fixes: aff17164 ("PCI: Provide sensible IRQ vector alloc/free routines")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph writes:
"A couple of fixes for the next rc on the nvme front. Various FC fixes
from James, controller removal fixes from Ming (including a block layer
patch), a APST related device quirk from Andy, a RDMA fix for small
queue depth device from Marta, as well as fixes for the lack of
metadata support in non-PCIe drivers and the printk logging format from
me."
The code in blk-mq-debugfs.c assumes that it is working on a blk-mq
queue and is not intended to work on a blk-sq queue. Hence only
register blk-mq debugfs attributes for blk-mq queues.
Fixes: commit 9c1051aacd ("blk-mq: untangle debugfs and sysfs")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 25165f79ad ("ASoC: rsnd: enable clock-frequency for both
44.1kHz/48kHz") supported both 44.1kHz/48kHz for AUDIO_CLKOUTx,
but it didn't care its parent clock name.
This patch fixes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This ensures that adjustments to x86_platform done by the hypervisor
setup is already respected by this simple calibration.
The current user of this, introduced by 1b5aeebf3a ("x86/earlyprintk:
Add support for earlyprintk via USB3 debug port"), comes much later
into play.
Fixes: dd759d93f4 ("x86/timers: Add simple udelay calibration")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: http://lkml.kernel.org/r/5e89fe60-aab3-2c1c-aba8-32f8ad376189@siemens.com
They have known firmware bugs. A fix is apparently in the works --
once fixed firmware is available, someone from Intel (Hi, Keith!)
can adjust the quirk accordingly.
Cc: stable@vger.kernel.org # v4.11
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
vlv_display_irq_postinstall() enables the LPE audio interrupts
regardless of whether the LPE audio irq chip has masked/unmasked
them. Also the irqchip masking/unmasking doesn't consider the state
of the display power well or the device, and hence just leads to
dmesg spew when it tries to access the hardware while it's powered
down.
If the current way works, then we don't need to do anything in the
mask/unmask hooks. If it doesn't work, well, then we'd need to properly
track whether the irqchip has masked/unmasked the interrupts when
we enable display interrupts. And the mask/unmask hooks would need
to check whether display interrupts are even enabled before frobbing
with he registers.
So let's just assume the current way works and neuter the mask/unmask
hooks. Also clean up vlv_display_irq_postinstall() a bit and stop
it from trying to unmask/enable the LPE C interrupt on VLV since it
doesn't exist.
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-4-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
(cherry picked from commit ebf5f92147)
Reference: http://mid.mail-archive.com/874cf6d3-4e45-d4cf-e662-eb972490d2ce@redhat.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Ethernet networking on K2L has been broken since v4.11-rc1. This was
caused by commit 32a34441a9 ("ARM: keystone: dts: fix netcp clocks
and add names"). This commit inadvertently moves on-chip static RAM
clock to the end of list of clocks provided for netcp. Since keystone
PM domain support does not have a list of recognized con_ids, only the
first clock in the list comes under runtime PM management. This means
the OSR (On-chip Static RAM) clock remains disabled and that broke
networking on K2L.
The OSR is used by QMSS on K2L as an external linking RAM. However this
is a standalone RAM that can be used for non-QMSS usage (as well as from
DSP side). So add a SRAM device node for the same and add the OSR clock
to the node.
Remove the now redundant OSR clock node from netcp.
To manage all clocks defined for netCP's use by runtime PM needs keystone
generic power domain (genpd) driver support which is under works.
Meanwhile, this patch restores K2L networking and is correct irrespective
of any future genpd work since OSR is an independent module and not part
of NetCP anyway.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
[nsekhar@ti.com: commit message updates, port to latest mainline]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Cc: stable@vger.kernel.org # for 4.11
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently only the PCIe driver supports metadata, so we should not claim
integrity support for the other drivers. This prevents nasty crashes
with targets that advertise metadata support on fabrics.
Also use the opportunity to factor out some code into a separate helper
that isn't even compiled if CONFIG_BLK_DEV_INTEGRITY is disabled.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
So that we can have more flags for transport-specific behavior.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
This is what most of the code already does and gives much more useful
prefixes than the device embedded in the pci_dev.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
A bunch of bug fixes:
- Fix display flickering on some chips at high refresh rates
- suspend/resume fix
- hotplug fix
- a couple of segfault fixes for certain cases
* 'drm-fixes-4.12' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: fix null point error when rmmod amdgpu.
drm/amd/powerplay: fix a signedness bugs
drm/amdgpu: fix NULL pointer panic of emit_gds_switch
drm/radeon: Unbreak HPD handling for r600+
drm/amd/powerplay/smu7: disable mclk switching for high refresh rates
drm/amd/powerplay/smu7: add vblank check for mclk switching (v2)
drm/radeon/ci: disable mclk switching for high refresh rates (v2)
drm/amdgpu/ci: disable mclk switching for high refresh rates (v2)
drm/amdgpu: fix fundamental suspend/resume issue
Core Changes:
- Don't drop vblank reference more than once in cases of ww retry (Daniel)
Driver Changes:
- radeon: Fix oops during radeon probe trying to reference wrong device (Lukas)
- qxl: Avoid sleeping while in atomic context on cursor update (Gabriel)
- gma500: Use VBT mode instead of pre-programmed mode for LVDS (Patrik)
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
* tag 'drm-misc-fixes-2017-05-25' of git://anongit.freedesktop.org/git/drm-misc:
drm/gma500/psb: Actually use VBT mode when it is found
drm: Fix deadlock retry loop in page_flip_ioctl
drm: qxl: Delay entering atomic context during cursor update
drm/radeon: Fix oops upon driver load on PowerXpress laptops
-----BEGIN PGP SIGNATURE-----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=sm+g
-----END PGP SIGNATURE-----
Merge tag 'samsung-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into fixes
Update of maintainers entry for Samsung SoC.
* tag 'samsung-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
MAINTAINERS: Remove Javier Martinez Canillas as reviewer for Exynos
Signed-off-by: Olof Johansson <olof@lixom.net>
please pull the following:
- Phil provides a fix for the BCM283x (Raspberry Pi) by flagging the first
4KiB of physical memory as a reserved region in order to let the secondary
cores successfully spin until they are brought online
-----BEGIN PGP SIGNATURE-----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=x322
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.12/devicetree-fixes-2' of http://github.com/Broadcom/stblinux into fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 4.12,
please pull the following:
- Phil provides a fix for the BCM283x (Raspberry Pi) by flagging the first
4KiB of physical memory as a reserved region in order to let the secondary
cores successfully spin until they are brought online
* tag 'arm-soc/for-4.12/devicetree-fixes-2' of http://github.com/Broadcom/stblinux:
ARM: dts: bcm283x: Reserve first page for firmware
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable some very core config options used on 64bit Rockchip socs.
As built-in driver enable the Rockchip spi driver as well as the
cros-ec-spi and cros-ec keyboard driver, as this may be helpful
in case an initrd does not work as expected and drops the user
into a shell. Another built-in is the fan53555 regulator driver,
as it and its register-compatible cousins Silergy syr827 and syr828
are often used on Rockchip socs as cpu-supply next to regular pmic.
The rest can be enabled as modules and contains the pcie host
controller and its phy, the sucessive approximation adc (saradc)
that gets often used for additional buttons on Rockchip boards
as well as the adc-keys Keyboard driver for these keys.
The cros-ec-pwm also can be a module, as it is normally only used to
drive display backlights as well as the Rockchip thermal controller
that allows to read the cpu and gpu temperatures and affect frequency
scaling if necessary.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
on DaVinci. Some resources were getting freed prematurely.
And there was an issue with resources not being on error.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6J2I
-----END PGP SIGNATURE-----
Merge tag 'davinci-fixes-for-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
These fix issues with power management initialization code
on DaVinci. Some resources were getting freed prematurely.
And there was an issue with resources not being on error.
* tag 'davinci-fixes-for-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: PM: Do not free useful resources in normal path in 'davinci_pm_init'
ARM: davinci: PM: Free resources in error handling path in 'davinci_pm_init'
Signed-off-by: Olof Johansson <olof@lixom.net>
In the loadbalance arp monitoring scheme, when a slave link change is
detected, the slave->link is immediately updated and slave_state_changed
is set. Later down the function, the rtnl_lock is acquired and the
changes are committed, updating the bond link state.
However, the acquisition of the rtnl_lock can fail. The next time the
monitor runs, since slave->link is already updated, it determines that
link is unchanged. This results in the bond link state permanently out
of sync with the slave link.
This patch modifies bond_loadbalance_arp_mon() to handle link changes
identical to bond_ab_arp_{inspect/commit}(). The new link state is
maintained in slave->new_link until we're ready to commit at which point
it's copied into slave->link.
NOTE: miimon_{inspect/commit}() has a more complex state machine
requiring the use of the bond_{propose,commit}_link_state() functions
which maintains the intermediate state in slave->link_new_state. The arp
monitors don't require that.
Testing: This bug is very easy to reproduce with the following steps.
1. In a loop, toggle a slave link of a bond slave interface.
2. In a separate loop, do ifconfig up/down of an unrelated interface to
create contention for rtnl_lock.
Within a few iterations, the bond link goes out of sync with the slave
link.
Signed-off-by: Nithin Nayak Sujir <nsujir@tintri.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Cc: Jay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some JITs can optimize comparisons with zero. Add a couple of
BPF_JSGE tests against immediate zero.
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
Various BPF fixes
Follow-up to fix incorrect pruning when alignment tracking is
in use and to properly clear regs after call to not leave stale
data behind, also a fix that adds bpf_clone_redirect to the
bpf_helper_changes_pkt_data helper and exposes correct map_flags
for lpm map into fdinfo. For details, please see individual
patches.
v1 -> v2:
- Reworked first patch so that env->strict_alignment is the
final indicator on whether we have to deal with strict
alignment rather than having CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
checks on various locations, so only checking env->strict_alignment
is sufficient after that. Thanks for spotting, Dave!
- Added patch 3 and 4.
- Rest as is.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds various verifier test cases:
1) A test case for the pruning issue when tracking alignment
is used.
2) Various PTR_TO_MAP_VALUE_OR_NULL tests to make sure pointer
arithmetic turns such register into UNKNOWN_VALUE type.
3) Test cases for the special treatment of LD_ABS/LD_IND to
make sure verifier doesn't break calling convention here.
Latter is needed, since f.e. arm64 JIT uses r1 - r5 for
storing temporary data, so they really must be marked as
NOT_INIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
trie_alloc() always needs to have BPF_F_NO_PREALLOC passed in via
attr->map_flags, since it does not support preallocation yet. We
check the flag, but we never copy the flag into trie->map.map_flags,
which is later on exposed into fdinfo and used by loaders such as
iproute2. Latter uses this in bpf_map_selfcheck_pinned() to test
whether a pinned map has the same spec as the one from the BPF obj
file and if not, bails out, which is currently the case for lpm
since it exposes always 0 as flags.
Also copy over flags in array_map_alloc() and stack_map_alloc().
They always have to be 0 right now, but we should make sure to not
miss to copy them over at a later point in time when we add actual
flags for them to use.
Fixes: b95a5c4db0 ("bpf: add a longest prefix match trie map implementation")
Reported-by: Jarno Rajahalme <jarno@covalent.io>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Luis Henriques