Commit Graph

374 Commits

Author SHA1 Message Date
Baruch Siach 6b6322676a mx25: add PWM4 to iomux
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:18:33 +02:00
Baruch Siach b04102bd34 mx25: add iomux defines for UART4 on KPP pins
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:18:32 +02:00
Baruch Siach f747847e8f mx25: add support for the CSI device
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:18:29 +02:00
Jason Wang 426ab49b33 mxc/iomux: add GPIO bank offset for iomux v3 platforms
These GPIO bank offsets are useful when define a gpio number.
E.G. when GPIO PORTC pin 6 is used for irq request pin of external
expanding device, we can define it like:
  #define EXP_PARENT_IRQ_PIN (GPIO_PORTC + 6)

Signed-off-by: Jason Wang <jason77.wang@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:18:24 +02:00
Jason Wang b3fb53a81c mx51/iomux: add UART and GPIO pad definitions for imx51_3ds board
Add UART2 CTS/RTS and UART3 RXD/TXD pad definitons for imx51_3ds board,
add GPIO_1_6 definiton because this pin is used as a CPLD parent irq
request pin on imx51_3ds board.

Signed-off-by: Jason Wang <jason77.wang@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:18:23 +02:00
Jason Wang 310894b72b mx51/iomux: Fix mux mode and input path for two pads
For pad EIM_D27 to work in UART3_RTS mode, the input path should be
3 instead of 0; for pad USBH1_STP to work in GPIO_1_27 mode, the mux
value should be 2 instead of 8.

Signed-off-by: Jason Wang <jason77.wang@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:18:22 +02:00
Amit Kucheria 68d03da2ae [PATCH] mxc: Fix pad names for imx51
The pads capable of being used as GPIOs had their pad-name and mode-name
switched. Also, fix the following:

- Whitespace fixes
- Replace IOMUX_CONFIG_ALTn with 'n'

Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:18:20 +02:00
Eric Bénard 21744f193d i.MX35: add cpuimx35 support and its baseboard
* cpuimx35 integrates i.MX35, RAM, NAND, Ethernet, I2C RTC, USB Host,
USB OTG and I2C touchscreen controller
* mbimxsd provides access to LCD, Audio, LED, Switch button, UART ...

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:18:19 +02:00
Eric Bénard 6f1fa706fc i.MX25: add cpuimx25 module and its baseboard
* cpuimx25 integrates i.MX25, RAM, NAND, Ethernet, I2C RTC, USB Host
and USB OTG
* mbimxsd provides access to LCD, Audio, LED, Switch button, UART ...

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:18:14 +02:00
Eric Bénard 8402ed30e1 i.MX25: add AUDMUX and SSI support
* add clocks for audmux and ssi 1 & 2
* add irq for ssi 1 & 2
* add devices platform for ssi1 & 2
* update audmux-v2 for i.MX25
* add base addresses for audmux & ssi 1 & 2
* add iomux configuration for GPIO for AUD5 port

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:18:13 +02:00
Eric Bénard 5a36c39923 MX25: put define for OTG base address in right include
the standard place for this define is include/mach/mx25.h

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:18:06 +02:00
Dinh Nguyen 71c2e514d5 mx5: Add i2c to Freescale MX51 Babbage HW
This patch adds I2C functionality to the Freescale MX51 Babbage HW.
The patch adds device structures, i2c board slave device defines,
IOMUX pin defines, and clocks.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:17:58 +02:00
Baruch Siach 49535a952b mx25: add platform code for imx-keypad
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:17:55 +02:00
Baruch Siach cce02464dd mxc_nand: add support for platform defined partitions
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:17:53 +02:00
Eric Bénard 16b3bf8c85 mxcmmc: add card detect through DAT3 possibility
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:17:46 +02:00
Uwe Kleine-König 7cc3c84666 ARM: imx: dynamically register imx-uart devices (imx25)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30 09:00:56 +02:00
Uwe Kleine-König d112f4e4e5 ARM: imx: dynamically register imx-uart devices (imx1)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30 09:00:54 +02:00
Uwe Kleine-König 2db6823773 ARM: imx: dynamically register imx-uart devices (generic part)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30 09:00:52 +02:00
Uwe Kleine-König 63ddc5b016 ARM: imx: dynamically register spi_imx devices (imx25)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30 09:00:48 +02:00
Uwe Kleine-König 0287073713 ARM: imx: dynamically register spi_imx devices (generic part)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30 09:00:45 +02:00
Uwe Kleine-König 7cdc8fa712 ARM: imx: dynamically register imx-i2c devices (imx35)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30 09:00:44 +02:00
Uwe Kleine-König 4a9b8b0b06 ARM: imx: dynamically register imx-i2c devices (imx31)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30 09:00:43 +02:00
Uwe Kleine-König c69871597d ARM: imx: dynamically register imx-i2c devices (imx27)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30 09:00:41 +02:00
Uwe Kleine-König a8ff045603 ARM: imx: dynamically register imx-i2c devices (imx25)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30 09:00:40 +02:00
Uwe Kleine-König 6348e6b54e ARM: imx: dynamically register imx-i2c devices (imx1)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30 09:00:37 +02:00
Uwe Kleine-König 99a754d8ee ARM: imx: dynamically register imx-i2c devices (generic part)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30 09:00:36 +02:00
Uwe Kleine-König 66384eedd9 ARM: imx: Change the way nand devices are registered (generic part)
Instead of having a platform device defined in a devices.c and register
it in the machine file allocate it dynamically.  This reduces the size
of needed memory as the new function is discarded after init and only
the existing devices are created.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30 09:00:29 +02:00
Uwe Kleine-König aa71251c5b ARM: mxc: remove paragraphs with old address of the FSF
As the kernel contains a copy of the GPL anyhow just get rid of the address
specification instead of fixing it.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30 09:00:28 +02:00
Uwe Kleine-König cd57c77772 MTD: mxc_nand: make bit fields unsigned to please sparse
This fixes:

	arch/arm/plat-mxc/include/mach/mxc_nand.h:25:14: error: dubious one-bit signed bitfield
	arch/arm/plat-mxc/include/mach/mxc_nand.h:26:17: error: dubious one-bit signed bitfield

While at it make width unsigned, too.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30 09:00:22 +02:00
Uwe Kleine-König 253ff1fa6f ARM: imx: new helper function imx_add_platform_device
This should be a globally available function, see

	http://thread.gmane.org/gmane.linux.kernel/998881/focus=998882

Until this hits mainline create a similar function available for imx
platforms only.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30 09:00:03 +02:00
Uwe Kleine-König 9f72ffedc8 ARM: imx: new Kconfig symbol and feature test macro for DMA on mx1 and mx2
This should be used instead of hard coding the corresponding platforms.
The feature test macro is needed to support different SOCs in a single
kernel image.  While at it rename dma-mx1-mx2 to dma-v1 as mx25 doesn't
use it and so the mx2 part is wrong and move the header to
arch/arm/mach-imx.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30 08:59:58 +02:00
Uwe Kleine-König f1d4cbef18 ARM: mxc: grammar fix
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-24 15:40:36 +02:00
Uwe Kleine-König ccfa7c2698 ARM: mx3/mx31ads: fold board header in its only user
Moreover remove unused definitions.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-24 15:40:35 +02:00
Uwe Kleine-König b396dc459c ARM: mx3/mx31_3ds: fold board header in its only user
Moreover remove unused definitions.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-24 15:40:34 +02:00
Uwe Kleine-König d57351a30f ARM: mx3/qong: get rid of nearly empty header
board-qong.h only defined a single symbol that was used only once.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-24 15:40:33 +02:00
Uwe Kleine-König 1faeaab27b ARM: mx2/mx27ads: fold board header in its only user
Moreover remove unused definitions.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-24 15:40:31 +02:00
Uwe Kleine-König d393d43ff7 ARM: mx2/mx21ads: fold board header in its only user
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-24 15:40:30 +02:00
Uwe Kleine-König 7b562d0f21 ARM: mx3/kzm_arm11_01: fold board header in its only user
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-24 15:40:29 +02:00
Uwe Kleine-König 5d3a136a08 ARM: imx: remove empty and unused board headers
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-24 15:40:28 +02:00
Uwe Kleine-König 8fdca37afc ARM: mx2/mx27_3ds: document alternative names and remove empty header
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-24 15:40:26 +02:00
Eric Bénard 0e79612012 ASoC: imx-ssi.c: add new choices to platform configuration
* introduce 3 new flags to allow a more detailed configuration
of the SSI link :
	IMX_SSI_NET : enable Network Mode
	IMX_SSI_SYN : enable Synchronous Mode
	IMX_SSI_USE_I2S_SLAVE : enable I2S Slave Mode
* new platform can use these settings without breaking actual
platforms.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-06-03 19:00:16 +01:00
Russell King 9bfe99a8f9 Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable 2010-05-20 23:43:18 +01:00
Alberto Panizzo b1e89955be MX3X: Add Keypad device definition for MX3X arch
This patch adds also the pin definition helpers in iomux-mx3.h

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-19 14:22:44 +02:00
Dinh Nguyen d6b273bfdf mx5: bring usb phy out of reset on freescale mx51 babbage hw
This patch de-asserts the reset line that is connected to the USB
ULPI PHY on USB Host1.

This patch should be included with the original USB host enablement
set of patches of mx51 babbage hw, but was accidentily left out.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-18 10:46:31 +02:00
Philippe Rétornaz 3a47b1a4f1 mx31moboard: OTG host support for smartbot board
The Eyebot robot needs the OTG port in host mode on the smartbot.

Add a new board definition so we can select the usb host/device
mode at boot with the mx31moboard_baseboard boot parameter.

Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-17 10:05:50 +02:00
Uwe Kleine-König b7d41d6d58 V4L/DVB: mx1-camera: compile fix
This fixes a regression of

	7d58289 (mx1: prefix SOC specific defines with MX1_ and deprecate old names)

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06 19:20:51 -03:00
Dinh Nguyen 5a25ad84e0 mxc: Add generic USB HW initialization for MX51
This patch adds USB HW initializiation code to /plat-mxc/ehci.c.
	-Sets some specific PHY settings
Renames mxc_set_usbcontrol to mxc_initialize_usb_hw.
Adds new register bit defines for the USB HW on Freescale
SoCs.

This patch applies to 2.6.34-rc6.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Reviewed-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-03 15:18:13 +02:00
Dinh Nguyen 282f152219 mxc: Update GPIO for USB support on Freescale MX51 Babbage HW
This patch is part of enabling USB for Freescale MX51 Babbage HW. This
patch updates the iomux pins for USB, and gpio line for reset the
USB hub on the MX51 Babbage HW.

This patch applies to 2.6.34-rc6.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-03 15:18:13 +02:00
Sascha Hauer 0491fcbb76 Merge branch 'mx51' into mxc-rc 2010-03-25 08:44:12 +01:00
Alberto Panizzo 11a332adfe MXC: mach-mx31_3ds: Update variable names over recent mach name modification.
Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-25 08:43:03 +01:00
Sascha Hauer fc300206ad i.MX51: remove NFC AXI static mapping
This area contains the Nand Flash controller registers. There
is no need to map them statically as the Nand driver uses ioremap().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-19 11:18:27 +01:00
Sascha Hauer 5443856cad i.MX51: determine silicon revision dynamically
Freescale redboot passes the silicon revision via
ATAG_REVISION. Remove this bootloader dependency by
doing the same as redboot does in the Kernel.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-19 11:18:20 +01:00
Sascha Hauer 3d1bc8626c i.MX51: map TZIC dynamically
This looks cleaner and allows us to call mx51_revision
later when we can use ioremap to determine the silicon
revision dynamically.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-19 11:05:40 +01:00
Sascha Hauer 48fae657f0 i.MX51 Babbage: Add uncompress output
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-19 11:00:40 +01:00
Russell King 988addf82e Merge branch 'origin' into devel-stable
Conflicts:
	arch/arm/mach-mx2/devices.c
	arch/arm/mach-mx2/devices.h
	sound/soc/pxa/pxa-ssp.c
2010-03-08 20:21:04 +00:00
Russell King b93a4afcff Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable
Conflicts:
	arch/arm/Makefile
2010-03-02 23:29:32 +00:00
Martin Fuzzey 23d3e7a659 USB: MXC: Add i.MX21 specific USB host controller driver.
This driver is a Full / Low speed only USB host for the i.MX21.

Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:52:55 -08:00
Linus Torvalds ac0f6f927d Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (100 commits)
  ARM: Eliminate decompressor -Dstatic= PIC hack
  ARM: 5958/1: ARM: U300: fix inverted clk round rate
  ARM: 5956/1: misplaced parentheses
  ARM: 5955/1: ep93xx: move timer defines into core.c and document
  ARM: 5954/1: ep93xx: move gpio interrupt support to gpio.c
  ARM: 5953/1: ep93xx: fix broken build of clock.c
  ARM: 5952/1: ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig
  ARM: 5949/1: NUC900 add gpio virtual memory map
  ARM: 5948/1: Enable timer0 to time4 clock support for nuc910
  ARM: 5940/2: ARM: MMCI: remove custom DBG macro and printk
  ARM: make_coherent(): fix problems with highpte, part 2
  MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itself
  ARM: 5945/1: ep93xx: include correct irq.h in core.c
  ARM: 5933/1: amba-pl011: support hardware flow control
  ARM: 5930/1: Add PKMAP area description to memory.txt.
  ARM: 5929/1: Add checks to detect overlap of memory regions.
  ARM: 5928/1: Change type of VMALLOC_END to unsigned long.
  ARM: 5927/1: Make delimiters of DMA area globally visibly.
  ARM: 5926/1: Add "Virtual kernel memory..." printout.
  ARM: 5920/1: OMAP4: Enable L2 Cache
  ...

Fix up trivial conflict in arch/arm/mach-mx25/clock.c
2010-03-01 09:15:15 -08:00
Russell King 2741ecb4ce Merge branch 'misc2' into devel 2010-02-25 22:09:41 +00:00
Uwe Kleine-König 9b1489e989 Merge branch 'mxc-master' of git://git.pengutronix.de/git/imx/linux-2.6 into imx/master
Removed selection of COMMON_CLKDEV by CONFIG_ARCH_MX5.  This is handled
in 03e09cd890.

arch/arm/plat-mxc/iomux-mx1-mx2.c was moved to
arch/arm/plat-mxc/iomux-v1.c in 5e2e95f520
and got bug fixed in 5c17ef878f.  The bug
in arch/arm/plat-mxc/iomux-v1.c isn't present any more since
bac3fcfad5, so
arch/arm/plat-mxc/iomux-mx1-mx2.c is simply deleted.

Conflicts:
	arch/arm/plat-mxc/Kconfig
	arch/arm/plat-mxc/Makefile
	arch/arm/plat-mxc/iomux-mx1-mx2.c

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-25 14:01:49 +01:00
Uwe Kleine-König bac3fcfad5 arm/imx/iomux-v1: check for invalid modes in mxc_gpio_mode
mxc_gpio_mode checks for invalid pins and so it returns zero for
success, -EINVAL for invalid pins.

While at it, remove definitions of GPIO_PORT_MAX removed as they are
unused now.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24 10:07:16 +01:00
Uwe Kleine-König 111588f830 arm/imx/iomux-v1: rename header file
Addionally make iomux-mx*.h headers stand-alone and similar to iomux-v3
platform files should include their platform iomux header from now on.
For now iomux.h simply includes all iomux-v1 platform headers and so
provides compatibility until all files are converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24 10:07:15 +01:00
Uwe Kleine-König 261f6f681c arm/mx25: don't include iomux.h which is for iomux-v1 machines
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24 10:07:14 +01:00
Uwe Kleine-König 2f6c97c48e arm/imx/iomux-mx3.h: unify style and comments
- use __MACH_IOMUX_MX3_H__ as header protector analogous to
  <mach/mx...h>
- use tabs for indention

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24 10:07:13 +01:00
Uwe Kleine-König 8902cbd9db arm/imx/iomux-mx2x: unify style
- use __MACH_IOMUX_MX2x_H__ as header protector analogous to
  <mach/mx...h>
- use tabs for indention

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24 10:07:12 +01:00
Uwe Kleine-König 6056154145 arm/imx/iomux-mx27: unify style and comments
- use __MACH_IOMUX_MX27_H__ as header protector analogous to
  <mach/mx...h>
- use tabs for indention
- fix sorting

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24 10:07:12 +01:00
Uwe Kleine-König e76feb8742 arm/imx/iomux-mx25: unify style and comment cleanup
- use __MACH_IOMUX_MX25_H__ as header protector analogous to
  <mach/mx...h>
- remove doxygen comments
- remove #error about mach/iomux.h which is unused on mx25
- remove #ifndef __ASSEMBLY__ which is unneeded here

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24 10:07:11 +01:00
Uwe Kleine-König 6985a719f9 arm/imx/iomux-mx21: unify style
- use __MACH_IOMUX_MX21_H__ as header protector analogous to
  <mach/mx...h>
- use tabs for indention

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24 10:07:10 +01:00
Uwe Kleine-König 6863f19810 arm/imx/iomux-mx1: unify style and comment cleanup
- use __MACH_IOMUX_MX1_H__ as header protector analogous to
  <mach/mx...h>
- use tabs for indention

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24 10:07:10 +01:00
Uwe Kleine-König f021b5a1ef arm/imx/iomux-v1: make base address a runtime choice
While at it move register modification to static inlines and
so make the relevant code more readable.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24 10:07:09 +01:00
Uwe Kleine-König 8e3a6e7fa7 arm/imx: choose sane CONSISTENT_DMA_SIZE if video is enabled for both mx1 and mx3
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24 10:07:06 +01:00
Uwe Kleine-König abf6163288 arm/imx/irq: order definitions of MXC_GPIO_IRQS numerically
This is important for kernels supporting more than one SoC.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24 10:07:05 +01:00
Uwe Kleine-König a8e33260ce arm/imx: remove #ifndef CONFIG_COMMON_CLKDEV block
COMMON_CLKDEV is used on all imx platforms, so this isn't used.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24 10:07:03 +01:00
Uwe Kleine-König 44fb5d1945 arm/imx: remove MTD_XIP support
This is broken since at least one year when

	ec996ba (mxc timer: make compile time independent)

removed the symbol MXC_TCN.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24 10:07:03 +01:00
Uwe Kleine-König 401d87dd66 arm/imx: remove "NO_PAD_CTRL" from Copyright statements
I assume this was introduced by something like

	sed -i -e 's/)/, NO_PAD_CTRL)'

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24 10:07:00 +01:00
Baruch Siach 0f547dc1f6 mx25pdk: add LCD support
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-02-18 08:35:55 +01:00
Baruch Siach 04a03e5fe3 mx25: add platform support for imxfb
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-02-18 08:35:05 +01:00
Fenkart/Bostandzhyan c931b4f655 ARM: 5928/1: Change type of VMALLOC_END to unsigned long.
Makes it consistent with VMALLOC_START

Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15 21:40:33 +00:00
Tony Lindgren 4e6d488af3 ARM: 5910/1: ARM: Add tmp register for addruart and loadsp
Otherwise more complicated uart configuration won't be possible.
We can use r1 for tmp register for both head.S and debug.S.

NOTE: This patch depends on another patch to add the the tmp register
into all debug-macro.S files. That can be done with:

$ sed -i -e "s/addruart,rx|addruart, rx/addruart, rx, tmp/"
	arch/arm/*/include/*/debug-macro.S

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12 17:27:52 +00:00
Valentin Longchamp e335c75cf3 mx31moboard: support for the smartbot baseboard
This baseboard is used on the handbot and eybot robots.

The sel gpios are used as enables and rst signals on smartbot, thus the
sel init is moved from mx31moboard file to board files.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-02-10 11:11:56 +01:00
Sascha Hauer fed9b63ca5 Merge branch 'mx51-baseport-sascha' of git://kernel.ubuntu.com/amitk/mx51-upstream into mxc-master 2010-02-10 11:11:37 +01:00
Sascha Hauer d9e557e5cb add ssi header file
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-02-10 11:05:13 +01:00
Amit Kucheria a329b48c43 mxc: Core support for Freescale i.MX5 series
Add basic clock support, cpu identification, I/O mapping, interrupt
controller, serial port and ethernet.

Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2010-02-09 18:32:16 +02:00
Amit Kucheria 438caa3f6c mxc: changes to common plat-mxc code to add support for i.MX5
Prepare for i.MX5 SoC code by adding the relevant macros to common plat-mxc
code.

Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2010-02-09 18:32:10 +02:00
Amit Kucheria a003708ad4 mxc: TrustZone interrupt controller (TZIC) for Freescale i.MX5 family
Freescale i.MX51 processor uses a new interrupt controller. Add
driver for TrustZone Interrupt Controller

Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2010-02-09 16:15:26 +02:00
Sascha Hauer d186f04c17 i.MX35: Add USB control register access support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Daniel Mack <daniel@caiaq.de>
2010-02-04 17:29:30 +01:00
Uwe Kleine-König 34101237d9 imx: define per SOC ..._PHYS_OFFSET and use these in favour of PHYS_OFFSET
This is a further step in allowing to build a kernel image for more
than one imx SOC.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-02 09:07:59 +01:00
Uwe Kleine-König 08f9bf167c mxc91231: redefine MXC91231_IO_ADDRESS using IMX_IO_ADDRESS
This simplifies the macro and makes is similar to the other
..._IO_ADDRESS macros defined for imx SOCs.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-02 09:07:56 +01:00
Uwe Kleine-König 9ea07ec05e mxc91231: use MXC91231_IO_ADDRESS instead of MXC91231_AIPS1_IO_ADDRESS
Apart from MXC91231_IO_ADDRESS itself this was the only usage of
MXC91231_AIPS1_IO_ADDRESS.  Now MXC91231_IO_ADDRESS can be recoded with
IMX_IO_ADDRESS and all helper macros can go away.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Daniel Schaeffer <daniel.schaeffer@timesys.com>
Cc: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Cc: Ivo Clarysse <ivo.clarysse@gmail.com>
2010-02-02 09:07:55 +01:00
Russell King 0b7d5170dc Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 2010-02-01 20:06:40 +00:00
Uwe Kleine-König 66ac2f28b6 mx25: deprecate UART1_BASE_ADDR and UART2_BASE_ADDR
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-01-30 13:34:11 +01:00
Uwe Kleine-König 7d58289fc3 mx1: prefix SOC specific defines with MX1_ and deprecate old names
The old names are defined only if the cpp symbol
IMX_NEEDS_DEPRECATED_SYMBOLS exists, which is defined (for now) for all
files below arch/arm/mach-mx1.

This was done earlier for mx2 and mx3, too.

USBD_INT0 is for now defined unconditionally to prevent breaking
drivers/usb/gadget/imx_udc.

While at it use IMX_IO_ADDRESS to define MX1_IO_ADDRESS which
adds a cast to the IO_ADDRESS macro fixing many warnings like

	arch/arm/mach-mx1/generic.c:51: warning: passing argument 1 of 'mxc_init_irq' makes pointer from integer without a cast

.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-01-30 13:34:01 +01:00
Baruch Siach dcbabbc1fc mx25: add support for the DryIce rtc
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-29 10:43:21 +01:00
Sascha Hauer 4cb73288b1 Merge branch 'mxc-rc' into mxc-master 2010-01-29 10:43:17 +01:00
Uwe Kleine-König 66ddfc62ca mx35: add a missing comma in a pad definition
Reported-by: Tim Sander <tstone@vlsi.informatik.tu-darmstadt.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-29 09:36:56 +01:00
Uwe Kleine-König 4e41db871e mx2/mx3: debug-macro.S needs deprecated symbols
This fixes:

	arch/arm/kernel/debug.S:147: Error: constant expression expected -- `ldrne r3,=(((UART1_BASE_ADDR)-AIPI_BASE_ADDR)+AIPI_BASE_ADDR_VIRT)'
	arch/arm/kernel/debug.S:163: Error: constant expression expected -- `ldrne r3,=(((UART1_BASE_ADDR)-AIPI_BASE_ADDR)+AIPI_BASE_ADDR_VIRT)'

when compiling for mx2 with CONFIG_DEBUG_LL=y.  A similar error exists
on mx3 and is fixed by this commit, too.

These were introduced by aae7019382.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26 18:55:52 +01:00
Baruch Siach fadc095622 mx25: remove unused mx25_clocks_init() argument
The fref is needless on mx25 since the reference clock is fixed at 24MHz.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26 18:54:06 +01:00
Vladimir Zapolskiy 71318da9d2 ARM: MX3: Fixed typo in declared enum type name.
To distinguish between mx31lite and mx31lilly boards better to use
different enum types.

Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-21 14:36:39 +01:00
Tony Lindgren b53e9b5ebd ARM: 5882/1: ARM: Fix uncompress code compile for different defines of flush(void)
Because of the include of the decompress_inflate.c file from
boot/compress/misc.c, there are different flush() defines:

In file included from arch/arm/boot/compressed/misc.c:249:
arch/arm/boot/compressed/../../../../lib/decompress_inflate.c:138:29: error: macro "flush" passed 2 arguments, but takes just 0

Fix this by removing the define of flush() in misc.c for
CONFIG_DEBUG_ICEDCC as it's already defined in mach/uncompress.h,
and that is being included unconditionally.

Also use a static inline function instead of define
for mach-mxc and mach-gemini to avoid similar bug
for those platforms.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-18 12:44:51 +00:00
Baruch Siach 27f5902589 mx25: add NAND support
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-14 11:15:02 +01:00
Uwe Kleine-König a8dfb6462a imx: define functions to configure chip selects in the WEIM
This has the addional effect that the macros CSCR_U, CSCR_L and CSCR_A
are not used anymore in mach-pcm038.c and mach-qong.c.  These still use
the deprecated IO_ADDRESS macro and shouldn't be used in new code.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Holger Schurig <hs4233@mail.mn-solutions.de>
Cc: Dmitriy Taychenachev <dimichxp@gmail.com>
2010-01-08 16:45:24 +01:00
Uwe Kleine-König 3cdd54417d imx: properly protect mach/mx{1,[25][157x]}.h from multiple inclusion
Some headers have used (now) wrong names or havn't had protection at
all.  This is needed before adding static inline functions to the
headers.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Magnus Lilja <lilja.magnus@gmail.com>
Cc: Holger Schurig <hs4233@mail.mn-solutions.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Daniel Mack <daniel@caiaq.de>
2010-01-08 16:45:23 +01:00
Uwe Kleine-König 4631166124 imx: remove unneeded include of mach/hardware.h
This include isn't needed and hurts when defining static inline
functions in mach/hardware.h (or files included by mach/hardware.h).

The reason is that the consumers of mach/uncompress.h are compiled using
-Dstatic= so the code for all inline function is included in e.g.
arch/arm/boot/compressed/misc.o.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Jörg Knobloch <knobloch@incostartec.com>
Cc: Alan Carvalho de Assis <acassis@gmail.com>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Dmitriy Taychenachev <dimichxp@gmail.com>
2010-01-08 16:45:22 +01:00
Uwe Kleine-König aae7019382 imx: only define deprecated symbols conditionally
Define deprecated symbols in an #ifdef IMX_NEEDS_DEPRECATED_SYMBOLS ...

All files that still depend on the old definitions get
-DIMX_NEEDS_DEPRECATED_SYMBOLS passed to the compiler.

When all remaining users are fixed this allows including the soc
specific headers unconditionally.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Eric Benard <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Alan Carvalho de Assis <acassis@gmail.com>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Cc: Ilya Yanok <yanok@emcraft.com>
Cc: Holger Schurig <hs4233@mail.mn-solutions.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Magnus Lilja <lilja.magnus@gmail.com>
2010-01-08 16:45:20 +01:00
Uwe Kleine-König a9b7a2dd21 imx: mangle addresses after adding the offset
don't use

	IO_ADDRESS($base) + $offset

but

	IO_ADDRESS($base + $offset)

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Holger Schurig <hs4233@mail.mn-solutions.de>
Cc: Rabin Vincent <rabin@rab.in>
Cc: "Agustín Ferrín Pozuelo" <gatoguan-os@yahoo.com>
Cc: Javier Martin <javier.martin@vista-silicon.com>
Cc: Valentin Longchamp <valentin.longchamp@epfl.ch>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Dmitriy Taychenachev <dimichxp@gmail.com>
2010-01-08 16:45:20 +01:00
Uwe Kleine-König 6ef9af6871 imx35: define and use MX35_IO_ADDRESS
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Jürgen Beisert <j.beisert@pengutronix.de>
Cc: Rabin Vincent <rabin@rab.in>
Cc: Valentin Longchamp <valentin.longchamp@epfl.ch>
2010-01-08 16:44:24 +01:00
Uwe Kleine-König df9375fad4 imx25: redefine MX25_IO_ADDRESS using IMX_IO_ADDRESS
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
2010-01-08 16:41:27 +01:00
Uwe Kleine-König 1273e7686f imx31: define and use MX31_IO_ADDRESS
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Magnus Lilja <lilja.magnus@gmail.com>
2010-01-08 16:41:26 +01:00
Uwe Kleine-König bc9ea6c7f5 imx27: define and use MX27_IO_ADDRESS
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Rabin Vincent <rabin@rab.in>
Cc: Javier Martin <javier.martin@vista-silicon.com>
Cc: Valentin Longchamp <valentin.longchamp@epfl.ch>
Cc: Holger Schurig <hs4233@mail.mn-solutions.de>
2010-01-08 16:41:25 +01:00
Uwe Kleine-König a3f5ac7838 imx21: define and use MX21_IO_ADDRESS
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Holger Schurig <hs4233@mail.mn-solutions.de>
Cc: Rabin Vincent <rabin@rab.in>
Cc: Agustín Ferrín Pozuelo <gatoguan-os@yahoo.com>
2010-01-08 16:41:24 +01:00
Uwe Kleine-König 1f2ddd64da imx: provide helper macro to define IO_ADDRESS
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Holger Schurig <hs4233@mail.mn-solutions.de>
Cc: Dmitriy Taychenachev <dimichxp@gmail.com>
2010-01-08 16:41:23 +01:00
Mark Brown 3d661ac187 mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module
The WM8350 core won't actually use the range yet, but it will in
future and the platform data to configure it is there now.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-05 17:08:54 +01:00
Uwe Kleine-König f568dd7f58 imx/mach-mx3: use constants namespaced by the corresponding SOC (easy part)
This just leaves cpu.c, devices.c and mm.c to clean up.  As these files
are used on more than one SOC they need some more work.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Cc: Valentin Longchamp <valentin.longchamp@epfl.ch>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Guennadi Liakhovetski <lg@denx.de>
Cc: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Magnus Lilja <lilja.magnus@gmail.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Harro Haan <hrhaan@yahoo.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Luotao Fu <l.fu@pengutronix.de>
Cc: Ilya Yanok <yanok@emcraft.com>
2010-01-05 10:10:07 +01:00
Baruch Siach a759544ff9 mx25: add support for FEC on i.MX25
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-04 11:47:44 +01:00
Baruch Siach dda71f1612 mx25: s/NO_PAD_CTL/NO_PAD_CTRL/
NO_PAD_CTL is not defined anywhere.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-04 11:47:44 +01:00
Linus Torvalds 60d9aa758c Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (90 commits)
  jffs2: Fix long-standing bug with symlink garbage collection.
  mtd: OneNAND: Fix test of unsigned in onenand_otp_walk()
  mtd: cfi_cmdset_0002, fix lock imbalance
  Revert "mtd: move mxcnd_remove to .exit.text"
  mtd: m25p80: add support for Macronix MX25L4005A
  kmsg_dump: fix build for CONFIG_PRINTK=n
  mtd: nandsim: add support for 4KiB pages
  mtd: mtdoops: refactor as a kmsg_dumper
  mtd: mtdoops: make record size configurable
  mtd: mtdoops: limit the maximum mtd partition size
  mtd: mtdoops: keep track of used/unused pages in an array
  mtd: mtdoops: several minor cleanups
  core: Add kernel message dumper to call on oopses and panics
  mtd: add ARM pismo support
  mtd: pxa3xx_nand: Fix PIO data transfer
  mtd: nand: fix multi-chip suspend problem
  mtd: add support for switching old SST chips into QRY mode
  mtd: fix M29W800D dev_id and uaddr
  mtd: don't use PF_MEMALLOC
  mtd: Add bad block table overrides to Davinci NAND driver
  ...

Fixed up conflicts (mostly trivial) in
	drivers/mtd/devices/m25p80.c
	drivers/mtd/maps/pcmciamtd.c
	drivers/mtd/nand/pxa3xx_nand.c
	kernel/printk.c
2009-12-16 10:23:43 -08:00
Daniel Mack 7e8d5cd93f USB: Add EHCI support for MX27 and MX31 based boards
The Freescale MX27 and MX31 SoCs have a EHCI controller onboard.
The controller is capable of USB on the go. This patch adds
a driver to support all three of them.

Users have to pass details about serial interface configuration in the
platform data.

The USB OTG core used here is the ARC core, so the driver should
be renamed and probably be merged with ehci-fsl.c eventually.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 11:55:18 -08:00
Linus Torvalds 4ef58d4e2a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...
2009-12-09 19:43:33 -08:00
Russell King 677f4f64e4 Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable 2009-12-04 17:34:50 +00:00
André Goddard Rosa af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Alan Carvalho de Assis 9e3e7afe9b mx27: mxt_td60: Add support to SD/MMC
This patch configures iomux and i2c io expander in order to add
support to SD/MMC cards on i-MXT TD60.

Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-12-02 12:06:14 +01:00
Yoichi Yuasa 415c7d26d2 Add KZM-ARM11-01 support
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-27 09:17:00 +01:00
Alan Carvalho de Assis 143a179d6c mx27: Add basic support for Maxtrack i-MXT TD60
Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-27 09:01:56 +01:00
Uwe Kleine-König fb37046630 ARM: fix "offest" -> "offset" typo
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-26 11:55:19 +00:00
Sascha Hauer 4998f1a30c mxc: mx1/mx2 DMA: add a possibility to create an endless DMA transfer
This is useful for audio where we do not want to setup a new scatterlist
after playing 4GB of audio data. This would cause skips in the playback.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-24 08:40:14 +01:00
Sascha Hauer 654166d687 mxc: iomux v3: remove resource handling
The current model does not allow to put a pad into different modes
once a pins is allocated. Remove the resource handling.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-24 08:39:43 +01:00
Sascha Hauer c6e7c0e20d mx3: Add SSI pins to iomux table
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-24 08:39:35 +01:00
Valentin Longchamp 9e554540f8 mx31: pins used for mx31moboard USB
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-24 08:26:37 +01:00
Daniel Mack 52939c03e5 ARM: MX3: fix CPU revision number detection
The macro mx31_revision() used to take the global variable system_rev to
determine the CPU revision number. However, this number is expected to
be set by the bootloader and is usually zero (at least on my MX31 based
boards here). More than that, it is usually taken to identify the
board's revision, not the CPU's.

Fix that by reading the the CPU's SREV register instead.

Right now, mx31_read_cpu_rev() is called from mx31_clocks_init() which
is admittedly not a good place for it. However, we need to enable the
IIM clock first, and the clock code also has conditional code that
depends on mx31_revision() returning the right thing.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-23 11:51:18 +01:00
Daniel Mack b7d91a62cb ARM: MX3: modularize 'mx31lite' code
This commit splits the support code for LogicPD's mx31lite hardware
into module and board specific parts.

This introduces a new mandatory coreparam called 'mx31lite_baseboard'
which specifies the base board support to use. For now, only the LiteKit
development board is supported, and developers of own boards are
encouraged to use that as reference.

The UART support moved to the board code.
Some comments were amended along the way.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-19 17:11:01 +01:00
Uwe Kleine-König 3f92a8bd5f imx: copy constants from mx3x.h to mx35.h using the appropriate namespace
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18 10:42:00 +01:00
Uwe Kleine-König ebca1a5543 imx: copy constants from mx3x.h to mx31.h using the appropriate namespace
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18 10:41:55 +01:00
Uwe Kleine-König 2ae959f420 imx: copy constants from mx2x.h to mx27.h using the appropriate namespace
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18 10:41:44 +01:00
Uwe Kleine-König 4c12b3c2e3 imx: copy constants from mx2x.h to mx21.h using the appropriate namespace
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18 10:41:38 +01:00
Uwe Kleine-König c8e5db0809 imx: reformat mx25.h to match the other platform includes
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18 10:41:27 +01:00
Uwe Kleine-König ae55326a00 imx: add namespace prefixes for symbols in mx35.h
The old names are still defined using the new names.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18 10:41:21 +01:00
Uwe Kleine-König 4f683a046c imx: add namespace prefixes for symbols in mx31.h
The old names are still defined using the new names.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18 10:41:17 +01:00
Uwe Kleine-König e4d0f7c71d imx: add namespace prefixes for symbols in mx3x.h
The old names are still defined using the new names.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18 10:41:12 +01:00
Uwe Kleine-König 26b10e7443 imx: add namespace prefixes for symbols in mx27.h
The old names are still defined using the new names.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18 10:41:03 +01:00
Uwe Kleine-König c112931377 imx: add namespace prefixes for symbols in mx21.h
The old names are still defined using the new names.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18 10:40:55 +01:00
Uwe Kleine-König b9fc90a48a imx: add namespace prefixes for symbols in mx2x.h
The old names are still defined using the new names.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18 10:40:50 +01:00
Uwe Kleine-König e676756fa4 imx: reorder mx3x.h
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18 10:40:44 +01:00
Uwe Kleine-König f73a42f705 imx: reorder mx27.h
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18 10:40:38 +01:00
Uwe Kleine-König 27085f2518 imx: reorder mx21.h
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18 10:40:33 +01:00
Uwe Kleine-König 104071b6dc imx: reorder mx2x.h
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18 10:40:28 +01:00
Sascha Hauer 9eedbdf1b4 MXC: Add a digital audio multiplexer driver
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14 10:30:39 +01:00
Sascha Hauer 34499a7cc5 pca100: Add board to uncompress.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14 10:30:19 +01:00
Daniel Mack f4f8bda232 MXC: Add support for ULPI Viewports
The ARC USB OTG Core has support for accessing ULPI tranceivers
through so called ULPI viewports. Export a set of function for use with
the USB OTG framework.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14 10:29:15 +01:00
Valentin Longchamp 8963c49fdb mx31: various pins used for mx31moboard
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14 10:29:14 +01:00
Daniel Mack 115b40c3d7 ARM: MX3: add MX3X_UART1_BASE_ADDR for uncompression on lilly1131
Reported-by: Jörg Knobloch <knobloch@incostartec.com>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14 10:29:12 +01:00