IPA initialization includes loading some firmware. This step is
done either by the modem or by the AP under Trust Zone. If the
AP loads firmware, the name of the firmware file is currently
hard-coded ("ipa_fws.mdt").
Add the ability to specify the relative path of the firmware file to
use in a property in the Device Tree IPA node. If the property is
not found (or if any other error occurs attempting to get it), fall
back to using a default relative path.
Use the "old" fixed name as the default. Rename the symbol that
represents this default to emphasize its purpose.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the SM8350 SoC, which includes IPA version 4.9.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the SC7280 SoC, which includes IPA version 4.11.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the SDX55 SoC, which includes IPA version 4.5.
Starting with IPA v4.5, a few of the memory regions have a different
number of "canary" values; update comments in the where the region
identifers are defined to accurately reflect that.
I'll note three differences in SDX55 versus the other two existing
platforms (SDM845 and SC7180):
- SDX55 uses a 32-bit Linux kernel
- SDX55 has four interconnects rather than three
- SDX55 uses IPA v4.5, which uses inline checksum offload
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are place holder functions in the IPA code that do nothing.
For the most part these are inverse functions, for example, once the
routing or filter tables are set up there is no need to perform any
matching teardown activity at shutdown, or in the case of an error.
These can be safely removed, resulting in some code simplification.
Add comments in these spots making it explicit that there is no
inverse.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename the SC7180 configuration data file so that its name is
derived from its IPA version.
Update a few other references to the code that talk about the SC7180
rather than just IPA v4.2.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename the SDM845 configuration data file so that its name is
derived from its IPA version. I am not aware of any special IPA
behavior or handling that would be based on a specific SoC (as
opposed to a specific version of the IPA it contains).
Update a few other references to the code that talk about the SDM845
rather than just IPA v3.5.1.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The backward compatibility register value is a platform-specific
property that is not stored in the platform data. Create a data
field where this can be represented, and get rid ipa_reg_bcr_val().
This register is not present starting with IPA v4.5.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Separate the IPA resource-related code into a new source file,
"ipa_resource.c", and matching header file "ipa_resource.h".
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPA version 4.9 and later use a different layout of some fields
found in the COMP_CFG register.
Define arbitration_lock_disable_encoded(), and use it to encode a
value into the ATOMIC_FETCHER_ARB_LOCK_DIS field based on the IPA
version.
And define full_flush_rsc_closure_en_encoded() to encode a value
into the FULL_FLUSH_WAIT_RSC_CLOSE_EN field based on the IPA
version.
The values of these fields are neither modified nor extracted by
current code, but this patch makes this possible for all supported
versions.
Fix a mistaken comment above ipa_hardware_config_comp() intended to
describe the purpose for the register.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We only use ipa_aggr_granularity_val() inside "ipa_main.c", so it
doesn't really need to be defined in a header file. It makes some
sense to be grouped with the register definitions, but it is unlike
the other inline functions now defined in "ipa_reg.h". So move it
into "ipa_main.c" where it's used. TIMER_FREQUENCY is used only
by that function, so move that definition as well.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify conditional tests throughout the IPA code so they do not
assume that IPA v3.5.1 is the oldest version supported. Also remove
assumptions that IPA v4.5 is the newest version of IPA supported.
Augment versions in comments with "+", to be clearer that the
comment applies to a version and subsequent versions. (E.g.,
"present for IPA v4.2+" instead of just "present for v4.2".)
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Starting with IPA v4.0, a limit is placed on the number of bytes
outstanding in a transaction, to reduce latency. The limit is
imposed only if this value is non-zero.
We don't use a non-zero value for SC7180, but newer versions of IPA
do. Prepare for that by allowing a programmed value to be specified
in the platform configuration data.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the QSB configuration data in ipa_hardware_config_qsb(), rather
than determining in code what values to use based on IPA version.
Pass configuration data to ipa_hardware_config() so it can be passed
to ipa_hardware_config_qsb().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently assume the IPA driver is built only for a 64 bit kernel.
When this constraint was put in place it eliminated some do_div()
calls, replacing them with the "/" and "%" operators. We now only
use these operations on u32 and size_t objects. In a 32-bit kernel
build, size_t will be 32 bits wide, so there remains no reason to
use do_div() for divide and modulo.
A few recent commits also fix some code that assumes that DMA
addresses are 64 bits wide.
With that, we can get rid of the 64-bit build requirement.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We configure the minimum and maximum number of various types of IPA
resources in ipa_resource_config(). It iterates over resource types
in the configuration data and assigns resource limits to each
resource group for each type.
Unfortunately, we are repeatedly initializing the resource data for
the first type, rather than initializing each of the types whose
limits are specified.
Fix this bug.
Fixes: 4a0d7579d4 ("net: ipa: avoid going past end of resource group array")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are times, such as when the modem crashes, when we issue
commands to clear the IPA hardware pipeline. These commands include
a data transfer command that delivers a small packet directly to the
default (AP<-LAN RX) endpoint.
The places that do this wait for the transactions that contain these
commands to complete, but the pipeline can't be assumed clear until
the sent packet has been *received*.
The small transfer will be delivered with a status structure, and
that status will indicate its tag is valid. This is the only place
we send a tagged packet, so we use the tag to determine when the
pipeline clear packet has arrived.
Add a completion to the IPA structure to to be used to signal
the receipt of a pipeline clear packet. Create a new function
ipa_cmd_pipeline_clear_wait() that will wait for that completion.
Reinitialize the completion whenever pipeline clear commands are
added to a transaction. Extend ipa_endpoint_status_tag() to check
whether a packet whose status contains a valid tag was sent from the
AP->command TX endpoint, and if so, signal the new IPA completion.
Have all callers of ipa_cmd_pipeline_clear_add() wait for the
pipeline clear indication after the transaction that clears the
pipeline has completed.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The IPA driver currently requires a DT property to be defined whose
value is the phandle for the modem subsystem. This was needed to
look up a remoteproc structure pointer used when registering for
notifications in the original IPA notification mechanism.
Remoteproc provides a more generic SSR notifier system, and the IPA
driver switched over to it last summer, but this remoteproc phandle
dependency was not removed at that time.
Get rid of the IPA remoteproc pointer and stop requiring the phandle
be specified.
This avoids a link error (rproc_put() not defined) for certain
configurations.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jon Hunter reported observing a build bug in the IPA driver:
https://lore.kernel.org/netdev/5b5d9d40-94d5-5dad-b861-fd9bef8260e2@nvidia.com
The problem is that the QMB0 max read value set for IPA v4.5 (16) is
too large to fit in the 4-bit field.
The actual value we want is 0, which requests that the hardware use
the maximum it is capable of.
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20201202141502.21265-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPA v4.5 introduces a new unified timer architecture driven on the
19.2 MHz SoC crystal oscillator (XO). It is independent of the IPA
core clock and avoids some duplication.
Lower-resolution time stamps are derived from this by using only the
high-order bits of the 19.2 MHz Qtime clock. And timers are derived
from this based on "pulse generators" configured to fire at a fixed
rate based on the Qtime clock.
This patch introduces ipa_qtime_config(), which configures the Qtime
mechanism for use. It also adds to the IPA register definitions
related to timers and time stamping.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update the IPA code to make use of the updated IPA v4.5 register
definitions. Generally what this patch does is, if IPA v4.5
hardware is in use:
- Ensure new registers or fields in IPA v4.5 are updated where
required
- Ensure registers or fields not supported in IPA v4.5 are not
examined when read, or are set to 0 when written
It does this while preserving the existing functionality for IPA
versions lower than v4.5.
The values to program for QSB_MAX_READS and QSB_MAX_WRITES and the
source and destination resource counts are updated to be correct for
all versions through v4.5 as well.
Note that IPA_RESOURCE_GROUP_SRC_MAX and IPA_RESOURCE_GROUP_DST_MAX
already reflect that 5 is an acceptable number of resources (which
IPA v4.5 implements).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update "ipa_reg.h" so that register definitions support IPA hardware
version 4.5, in addition to versions 3.5.1 through v4.2. Most of
the register definitions are the same, but in some cases fields are
added, changed, or eliminated.
Updates for a few IPA v4.5 registers are more complex, and adding
those definition will be deferred to separate patches. This patch
only updates the register offset and field definitions, and adds
informational comments.
The only code change avoids accessing the backward compatibility
register for IPA version 4.5 in ipa_hardware_config(). Other IPA
v4.5-specific code changes will come later.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A system shutdown can happen at essentially any time, and it's
possible that the IPA driver is busy when a shutdown is underway.
IPA hardware accesses IMEM and SMEM memory regions using an IOMMU,
and at some point during shutdown, needed I/O mappings could become
invalid. This could be disastrous for any "in flight" IPA activity.
Avoid this by defining a new driver shutdown callback that stops all
IPA activity and cleanly shuts down the driver. It merely calls the
driver's existing remove callback, reporting the error if it returns
one.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The IPA driver remove callback, ipa_remove(), calls ipa_modem_stop()
if the setup stage of initialization is complete. If a concurrent
call to ipa_modem_start() or ipa_modem_stop() has begin but not
completed, ipa_modem_stop() can return an error (-EBUSY).
The next patch adds a driver shutdown callback, which will simply
call ipa_remove(). We really want our shutdown callback to clean
things up. So add a single retry to the ipa_modem_stop() call in
ipa_remove() after a short (millisecond) delay. This offers no
guarantee the shutdown will complete successfully, but we'll at
least try a little harder before giving up.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Define a new type of configuration data, used to initialize the
IPA core clock and interconnects. This is the first of three
patches, and defines the data types and interface but doesn't
yet use them.
Switch the return value if there is no matching configuration data
to ENODEV instead of ENOTSUPP (to avoid using the nonstandard errno).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several IPA register field masks are defined without the "_FMASK"
suffix naming convention. Rename these, so all field masks are
consistently named.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For IPA v3.5.1, the IPA filter/routing hash enable register actually
does exist, but it is at offset 0x8c into the IPA register space.
For newer versions of IPA it is at offset 0x148.
Define a new inline function ipa_reg_filt_rout_hash_en_offset() to
return the appropriate value for a given version of IPA hardware.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Delete a spurious line of code in ipa_hardware_config(). It reads a
register value then ignores the value, so is completely unnecessary.
Add a missing word in a comment.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following call in ipa_validate_build() is erroneous:
BUILD_BUG_ON(sizeof(struct gsi_trans) > 128);
The fact is, it is not a bug for the size of a GSI transaction to be
bigger than 128 bytes. The correct operation of the driver is not
dependent on the size of this structure. The only consequence of
the transaction being large is that the amount of memory required
is larger.
The problem this was trying to flag is that a *slight* increase in
the size of this structure will have a disproportionate effect on
the amount of memory used. E.g. if the structure grew to 132 bytes
the memory requirement for the transaction arrays would be about
double.
With various debugging build flags enabled, the size grows to 160
bytes. But there's no reason to treat that as a build-time bug.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We enable a channel doorbell engine only for IPA v3.5.1, and that is
now handled directly by gsi_channel_program().
When initially setting up a channel, we want that doorbell engine
enabled, and we can request that independent of the IPA version.
Doing that makes the "legacy" argument to gsi_channel_setup_one()
unnecessary. And with that gone we can get rid of the "legacy"
argument to gsi_channel_setup(), and gsi_setup() as well.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Although GSI is integral to IPA, it is a separate hardware component
and the IPA code supporting it has been structured to avoid explicit
dependence on IPA details. An example of this is that gsi_init() is
passed a number of Boolean flags to indicate special behaviors,
whose values are dependent on the IPA hardware version. Looking
ahead, newer hardware versions would require even more such special
behaviors.
For any given version of IPA hardware (like 3.5.1 or 4.2), the GSI
hardware version is fixed (in this case, 1.3 and 2.2, respectively).
So the IPA version *implies* the GSI version, and the IPA version
can be used as effectively the equivalent of the GSI hardware version.
Rather than proliferating new special behavior flags, just provide
the IPA version to the GSI layer when it is initialized. The GSI
code can then use that directly to determine whether special
behaviors are required. The IPA version enumerated type is already
isolated to its own header file, so the exposure of this IPA detail
is very limited.
For now, just change gsi_init() to pass the version rather than the
Boolean flags, and set the flag values internal to that function.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The minimum and maximum limits for resources assigned to a given
resource group are programmed in pairs, with the limits for two
groups set in a single register.
If the number of supported resource groups is odd, only half of the
register that defines these limits is valid for the last group; that
group has no second group in the pair.
Currently we ignore this constraint, and it turns out to be harmless,
but it is not guaranteed to be. This patch addresses that, and adds
support for programming the 5th resource group's limits.
Rework how the resource group limit registers are programmed by
having a single function program all group pairs rather than having
one function program each pair. Add the programming of the 4-5
resource group pair limits to this function. If a resource group is
not supported, pass a null pointer to ipa_resource_config_common()
for that group and have that function write zeroes in that case.
Tested-by: Sujit Kautkar <sujitka@chromium.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The number of resource groups supported by the hardware can be
different for source and destination resources. Determine the
number supported for each using separate functions. Make the
functions inline end move their definitions into "ipa_reg.h",
because they determine whether certain register definitions are
valid. Pass just the IPA hardware version as argument.
IPA_RESOURCE_GROUP_COUNT represents the maximum number of resource
groups the driver supports for any hardware version. Change that
symbol to be two separate constants, one for source and the other
for destination resource groups. Rename them to end with "_MAX"
rather than "_COUNT", to reflect their true purpose.
Tested-by: Sujit Kautkar <sujitka@chromium.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When "W=2" is supplied to the build command, we get a warning about
shadowing a global declaration (of a typedef) for a variable defined
in ipa_probe(). Rename the variable to get rid of the warning.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous patch causes a system resume to be triggered when a
packet is available for receipt on a suspended RX endpoint.
The CLOCK_HELD flag was previously used to indicate that an extra
clock reference was held, preventing suspend. But we no longer need
such a flag:
- We take an initial reference in ipa_config().
- That reference is held until ipa_suspend() releases it.
- A subsequent system resume leads to a reference getting
re-acquired in ipa_resume().
- This can repeat until ultimately the module is removed, where
ipa_remove() releases the reference.
We no longer need a special flag to determine whether this extra
reference is held--it is, provided probe has completed successfully
and the driver is not suspended (or removed).
On the other hand, once suspended, it's possible for more than one
endpoint to trip the IPA SUSPEND interrupt, and we only want to
trigger the system resume once. So repurpose the Boolean CLOCK_HELD
flag to record whether the IPA SUSPEND handler should initiate a
system resume.
The flag will be be cleared each time ipa_suspend() is called,
*before* any endpoints are suspended. And it will be set inside the
IPA SUSPEND interrupt handler exactly once per suspend.
Rename the flag IPA_FLAG_RESUMED to reflect its new purpose.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The call to wakeup_source_register() in ipa_probe() does not do what
it was intended to do. Call device_init_wakeup() in ipa_setup()
instead, to set the IPA device as wakeup-capable and to initially
enable wakeup capability.
When we receive a SUSPEND interrupt, call pm_wakeup_dev_event()
with a zero processing time, to simply call for a resume without
any other processing. The ipa_resume() call will take care of
waking things up again, and will handle receiving the packet.
Note that this gets rid of a clock reference counting bug that
occurred when handling an IPA SUSPEND interrupt. Specifically,
ipa_suspend_handler() took an IPA clock reference *in addition*
to the one taken by ipa_resume(). There is no need to back-port
this fix however, because it only affects code that was not
previously working (this patch is part of fixing that).
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when (before) the last IPA clock reference is dropped,
all endpoints are suspended. And whenever the first IPA clock
reference is taken, all endpoints are resumed (or started).
In most cases there's no need to start endpoints when the clock
starts. So move the calls to ipa_endpoint_suspend() and
ipa_endpoint_resume() out of ipa_clock_put() and ipa_clock_get(),
respectiely. Instead, only suspend endpoints when handling a system
suspend, and only resume endpoints when handling a system resume.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We take a clock reference in ipa_config() in order to prevent the
the IPA clock from being shutdown until a power management suspend
request arrives. An atomic field in the IPA structure records
whether that extra reference had been taken.
Rather than using an atomic to represent a Boolean value, define
a new flags bitmap, and define a "clock held" flag to represent
whether the extra clock reference has been taken.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit affects comments (and in one case, whitespace) only.
Throughout the IPA code, return statements are documented using
"@Return:", whereas they should use "Return:" instead. Fix these
mistakes.
In function definitions, some parameters are missing their comment
to describe them. And in structure definitions, some fields are
missing their comment to describe them. Add these missing
descriptions.
Some arguments changed name and type along the way, but their
descriptions were not updated (an endpoint pointer is now used in
many places that previously used an endpoint ID). Fix these
incorrect parameter descriptions.
In the description for the ipa_clock structure, one field had a
semicolon instead of a colon in its description. Fix this.
Add a missing function description for ipa_gsi_endpoint_data_empty().
All of these issues were identified when building with "W=1".
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The timer used for aggregation makes use of an internal 32 KHz clock.
The granularity of the timer is programmed by a field whose value is
computed by ipa_aggr_granularity_val(). Redefine the way that value
is computed by using a new TIMER_FREQUENCY constant representing the
underlying clock frequency.
Add two BUILD_BUG_ON() calls to ensure the value used is valid.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the suspend and resume callbacks rather than suspend_noirq and
resume_noirq. With IPA v4.2, we use the CHANNEL_STOP command to
implement a suspend, and without interrupts enabled, that command
won't complete.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In several places, a Boolean flag is used in the GSI code to
indicate whether the "doorbell engine" should be enabled or not
when a channel is configured. This is basically done to abstract
this property from the IPA version; the GSI code doesn't otherwise
"know" what the IPA hardware version is. The doorbell engine is
enabled only for IPA v3.5.1, not for IPA v4.0 and later.
The next patch makes another change that affects behavior during
channel reset (which also involves programming the channel). It
also distinguishes IPA v3.5.1 hardware from newer hardware.
Rather than creating another flag whose value matches the "db_enable"
value, just rename "db_enable" to be "legacy" so it can be used to
signal more than just the special doorbell handling.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ipa_mem_data structure type was never actually used. Instead,
the IPA memory regions were defined using the ipa_mem structure.
Redefine struct ipa_mem_data so it encapsulates the array of IPA-local
memory region descriptors along with the count of entries in that
array. Pass just an ipa_mem structure pointer to ipa_mem_init().
Rename the ipa_mem_data[] array ipa_mem_local_data[] to emphasize
that the memory regions it defines are IPA-local memory.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch includes three source files that represent some basic "main
program" code for the IPA driver. They are:
- "ipa.h" defines the top-level IPA structure which represents an IPA
device throughout the code.
- "ipa_main.c" contains the platform driver probe function, along with
some general code used during initialization.
- "ipa_reg.h" defines the offsets of the 32-bit registers used for the
IPA device, along with masks that define the position and width of
fields within these registers.
- "version.h" defines some symbolic IPA version numbers.
Each file includes some documentation that provides a little more
overview of how the code is organized and used.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder