We currently check the MokSBState variable to decide whether we should
treat UEFI secure boot as being disabled, even if the firmware thinks
otherwise. This is used by shim to indicate that it is not checking
signatures on boot images. In the kernel, we use this to relax lockdown
policies.
However, in cases where shim is not even being used, we don't want this
variable to interfere with lockdown, given that the variable may be
non-volatile and therefore persist across a reboot. This means setting
it once will persistently disable lockdown checks on a given system.
So switch to the mirrored version of this variable, called MokSBStateRT,
which is supposed to be volatile, and this is something we can check.
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Peter Jones <pjones@redhat.com>
When booting the x86 kernel via EFI using the LoadImage/StartImage boot
services [as opposed to the deprecated EFI handover protocol], the setup
header is taken from the image directly, and given that EFI's LoadImage
has no Linux/x86 specific knowledge regarding struct bootparams or
struct setup_header, any absolute addresses in the setup header must
originate from the file and not from a prior loading stage.
Since we cannot generally predict where LoadImage() decides to load an
image (*), such absolute addresses must be treated as suspect: even if a
prior boot stage intended to make them point somewhere inside the
[signed] image, there is no way to validate that, and if they point at
an arbitrary location in memory, the setup_data nodes will not be
covered by any signatures or TPM measurements either, and could be made
to contain an arbitrary sequence of SETUP_xxx nodes, which could
interfere quite badly with the early x86 boot sequence.
(*) Note that, while LoadImage() does take a buffer/size tuple in
addition to a device path, which can be used to provide the image
contents directly, it will re-allocate such images, as the memory
footprint of an image is generally larger than the PE/COFF file
representation.
Cc: <stable@vger.kernel.org> # v5.10+
Link: https://lore.kernel.org/all/20220904165321.1140894-1-Jason@zx2c4.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
- to avoid a general protection failure when using perf/OA (Chris)
- to avoid kernel warnings on driver release (Janusz)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmMrdP0ACgkQ+mJfZA7r
E8oYYQf/Z1ohgR8BWFRkypJdePrkAiaNs0pOdXg6x6Ij1VaIcOc2utWb/SPIXchN
FSmpjSWWkxWXXg9ztDOZ/xXFZenivWXaJOlBgFapNkP12M3yIf3d0Khse1ZSezx5
H5BcgyBnrD4b8IO5Kap+UmZQeR+PhPC4gTF28Y2fbvFYpIsfHHEiBf/L/d4db6gv
hEeb26qoBeY6yOwt4VO4a35SYlm5f88i0gRUan03RmgOM/Zpb7pxku1VaB0SvTnm
e91y7DEJHWT7EtM1VTLFAkglVdX7UxpewxGTTh+T0yQZQFP8IzgSRdJQnvH6SLQC
+D/Yvwb3cgBs4UiwZFCNTIuhVJRSWw==
=DmQ5
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2022-09-21' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
2 gem context related fixes:
- to avoid a general protection failure when using perf/OA (Chris)
- to avoid kernel warnings on driver release (Janusz)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yyt1CV+YIjKQZZMB@intel.com
Using rbtree for sorting groups by average fragment size is relatively
expensive (needs rbtree update on every block freeing or allocation) and
leads to wide spreading of allocations because selection of block group
is very sentitive both to changes in free space and amount of blocks
allocated. Furthermore selecting group with the best matching average
fragment size is not necessary anyway, even more so because the
variability of fragment sizes within a group is likely large so average
is not telling much. We just need a group with large enough average
fragment size so that we have high probability of finding large enough
free extent and we don't want average fragment size to be too big so
that we are likely to find free extent only somewhat larger than what we
need.
So instead of maintaing rbtree of groups sorted by fragment size keep
bins (lists) or groups where average fragment size is in the interval
[2^i, 2^(i+1)). This structure requires less updates on block allocation
/ freeing, generally avoids chaotic spreading of allocations into block
groups, and still is able to quickly (even faster that the rbtree)
provide a block group which is likely to have a suitably sized free
space extent.
This patch reduces number of block groups used when untarring archive
with medium sized files (size somewhat above 64k which is default
mballoc limit for avoiding locality group preallocation) to about half
and thus improves write speeds for eMMC flash significantly.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Link: https://lore.kernel.org/r/20220908092136.11770-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Curently we don't use any preallocation when a file is already closed
when allocating blocks (from writeback code when converting delayed
allocation). However for small files, using locality group preallocation
is actually desirable as that is not specific to a particular file.
Rather it is a method to pack small files together to reduce
fragmentation and for that the fact the file is closed is actually even
stronger hint the file would benefit from packing. So change the logic
to allow locality group preallocation in this case.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Link: https://lore.kernel.org/r/20220908092136.11770-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently the Orlov inode allocator searches for free inodes for a
directory only in flex block groups with at most inodes_per_group/16
more directory inodes than average per flex block group. However with
growing size of flex block group this becomes unnecessarily strict.
Scale allowed difference from average directory count per flex block
group with flex block group size as we do with other metrics.
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220908092136.11770-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
mb_set_largest_free_order() updates lists containing groups with largest
chunk of free space of given order. The way it updates it leads to
always moving the group to the tail of the list. Thus allocations
looking for free space of given order effectively end up cycling through
all groups (and due to initialization in last to first order). This
spreads allocations among block groups which reduces performance for
rotating disks or low-end flash media. Change
mb_set_largest_free_order() to only update lists if the order of the
largest free chunk in the group changed.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Link: https://lore.kernel.org/r/20220908092136.11770-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
One of the side-effects of mb_optimize_scan was that the optimized
functions to select next group to try were called even before we tried
the goal group. As a result we no longer allocate files close to
corresponding inodes as well as we don't try to expand currently
allocated extent in the same group. This results in reaim regression
with workfile.disk workload of upto 8% with many clients on my test
machine:
baseline mb_optimize_scan
Hmean disk-1 2114.16 ( 0.00%) 2099.37 ( -0.70%)
Hmean disk-41 87794.43 ( 0.00%) 83787.47 * -4.56%*
Hmean disk-81 148170.73 ( 0.00%) 135527.05 * -8.53%*
Hmean disk-121 177506.11 ( 0.00%) 166284.93 * -6.32%*
Hmean disk-161 220951.51 ( 0.00%) 207563.39 * -6.06%*
Hmean disk-201 208722.74 ( 0.00%) 203235.59 ( -2.63%)
Hmean disk-241 222051.60 ( 0.00%) 217705.51 ( -1.96%)
Hmean disk-281 252244.17 ( 0.00%) 241132.72 * -4.41%*
Hmean disk-321 255844.84 ( 0.00%) 245412.84 * -4.08%*
Also this is causing huge regression (time increased by a factor of 5 or
so) when untarring archive with lots of small files on some eMMC storage
cards.
Fix the problem by making sure we try goal group first.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/all/20220727105123.ckwrhbilzrxqpt24@quack3/
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220908092136.11770-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-09-20 (ice)
Michal re-sets TC configuration when changing number of queues.
Mateusz moves the check and call for link-down-on-close to the specific
path for downing/closing the interface.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix interface being down after reset with link-down-on-close flag on
ice: config netdev tc before setting queues number
====================
Link: https://lore.kernel.org/r/20220920205344.1860934-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The original patch added the static branch to handle the situation,
when assigning an XDP TX queue to every CPU is not possible,
so they have to be shared.
However, in the XDP transmit handler ice_xdp_xmit(), an error was
returned in such cases even before static condition was checked,
thus making queue sharing still impossible.
Fixes: 22bf877e52 ("ice: introduce XDP_TX fallback path")
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/r/20220919134346.25030-1-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-09-19 (iavf, i40e)
Norbert adds checking of buffer size for Rx buffer checks in iavf.
Michal corrects setting of max MTU in iavf to account for MTU data provided
by PF, fixes i40e to set VF max MTU, and resolves lack of rate limiting
when value was less than divisor for i40e.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Fix set max_tx_rate when it is lower than 1 Mbps
i40e: Fix VF set max MTU size
iavf: Fix set max MTU size with port VLAN and jumbo frames
iavf: Fix bad page state
====================
Link: https://lore.kernel.org/r/20220919223428.572091-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As the comment right before the mtk_dsi_stop() call advises,
mtk_dsi_stop() should only be called after
mtk_drm_crtc_atomic_disable(). That's because that function calls
drm_crtc_wait_one_vblank(), which requires the vblank irq to be enabled.
Previously mtk_dsi_stop(), being in mtk_dsi_poweroff() and guarded by a
refcount, would only be called at the end of
mtk_drm_crtc_atomic_disable(), through the call to mtk_crtc_ddp_hw_fini().
Commit cde7e2e35c ("drm/mediatek: Separate poweron/poweroff from
enable/disable and define new funcs") moved the mtk_dsi_stop() call to
mtk_output_dsi_disable(), causing it to be called before
mtk_drm_crtc_atomic_disable(), and consequently generating vblank
timeout warnings during suspend.
Move the mtk_dsi_stop() call back to mtk_dsi_poweroff() so that we have
a working vblank irq during mtk_drm_crtc_atomic_disable() and stop
getting vblank timeout warnings.
Fixes: cde7e2e35c ("drm/mediatek: Separate poweron/poweroff from enable/disable and define new funcs")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Link: http://lists.infradead.org/pipermail/linux-mediatek/2022-August/046713.html
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Most of the arguments are identical between the two call sites and they
can be accessed through the 'struct vba_vars_st' pointer. This reduces
the total amount of stack space that
dml314_ModeSupportAndSystemConfigurationFull() uses by 112 bytes with
LLVM 16 (1976 -> 1864), helping clear up the following clang warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_mode_vba_314.c:4020:6: error: stack frame size (2216) exceeds limit (2048) in 'dml314_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
void dml314_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
^
1 error generated.
Link: https://github.com/ClangBuiltLinux/linux/issues/1710
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Tested-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Most of the arguments are identical between the two call sites and they
can be accessed through the 'struct vba_vars_st' pointer. This reduces
the total amount of stack space that
dml314_ModeSupportAndSystemConfigurationFull() uses by 240 bytes with
LLVM 16 (2216 -> 1976), helping clear up the following clang warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_mode_vba_314.c:4020:6: error: stack frame size (2216) exceeds limit (2048) in 'dml314_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
void dml314_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
^
1 error generated.
Link: https://github.com/ClangBuiltLinux/linux/issues/1710
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Tested-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some asics still support non-atomic code paths.
Fixes: 66f99628eb ("drm/amdgpu: use dirty framebuffer helper")
Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The pptable in the vbios is fully ready. The related workarounds
in driver are not needed any more.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
num_dsc is 3 for dcn314 based on HW capablity.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This shouldn't trigger during tiled display hotplug/unplug but it does
because one of the tiles can end up with a NULL plane state.
This also doesn't guard against the hang that it was originally trying
to resolve, and can instead cause DIO corruption due to OTG sync
being lost.
[How]
This was reverted at one point out of DCN31 so revert it here too.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DP DSC compliance failing for dcn314 due to ICH_RESET_AT_END_OF_LINE
shift and mask being missing
[How]
Add in shift and mask for ICH_RESET_AT_END_OF_LINE
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Update after new measurment came in
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When USB4 DP link training failed and fell back to lower link rate,
the time slot calculation uses the verified_link_cap.
And the verified_link_cap was not updated to the new one.
It caused the wrong VC payload time-slot was allocated.
[How]
Updated verified_link_cap with the new one from cur_link_settings
after the LT completes successfully.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During hot plug of specific 5K tiled display, sometimes both the tiles
are not synchronized resulting in distortion. The reason is that otgs of
both the tiles goes out of sync when otg workaround (dcnxxx_disable_otg_wa)
is applied for bandwidth optimization. The otg workaround reenables otg
but otg synchronization context is not reset and hence dc_trigger_sync()
does not resynchronize otg again.
[How]
Implement reset_sync_context_for_pipe() to reset the otg synchronization
context for the disabled pipe and its slave pipes when otg workaround is
applied.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current DCN3.2 logic for finding the dummy P-state index uses the
DCN3.0 DML validation function instead of DCN3.2 DML.
This can result in either unexpected DML VBA values, or unexpected
dummy P-state index to be used.
[How]
Update the dummy P-state logic to use DCN3.2 DML validation function.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We have minimal pipe split transition method to avoid pipe
allocation outage.However, this method will invoke audio setup
which cause audio output stuck once pipe reallocate.
[how]
skip audio setup for pipelines which audio stream has been enabled
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: zhikzhai <zhikai.zhai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The desktop plane and full-screen game plane may have different
gamut remap coefficients, if switching between desktop and
full-screen game without updating the gamut remap will cause
incorrect color.
[How]
Update gamut remap if planes change.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
LTTPRs can in very rare instsances fail to increment DPCD LTTPR count.
This results in aux-i LTTPR requests to be sent to the wrong DPCD
address, which causes link training failure.
[HOW]
Override internal repeater count if fixed_vs flag is set for a given link
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Correctly set ddr5 channel width to 8 bytes
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DC makes use of layer_index (zpos) when picking the HW plane to enable
HW cursor on. However, some compositors will not attach zpos information
to each DRM plane. Consequently, in amdgpu, we default layer_index to 0
and do not update it.
This causes said DC logic to enable HW cursor on all planes of the same
layer_index, which manifests as a double cursor issue if one of the
planes is scaled (and hence scaling the cursor as well).
[How]
Use DRM core helpers to calculate a normalized_zpos value for each
drm_plane_state under each crtc, within the atomic state.
This helper will first consider existing zpos values, and if
identical/unset, fallback to plane ID ordering.
The normalized_zpos is then passed to dc_plane_info during atomic check
for later use by the cursor logic.
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why and How]
- Only consider pixel rate div policy for DCN32+
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
420 modes are limited by FMT buffer width of 4096
which requires multi-pipe support in form of ODM
combine. If 420 modes have greater HActive than
4096, the DML logic should accomodate whether
it should be rejected, or ODM combine 2:1 or 4:1
is triggered accordingly.
[How]
FMT Buffer limit of 4096 in DCN32. Force ODM
combine depending on HActive and FMT Buffer limit.
Reject modes if TMDS 420 and above 4096.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates the PTE flags when translate further (TF) is
enabled:
- With translate_further enabled, invalid PTEs can be 0. Reading
consecutive invalid PTEs as 0 is considered a fault. To prevent
this, ensure invalid PTEs have at least 1 bit set.
- The current invalid PTE flags settings to translate a retry fault
into a no-retry fault, doesn't work with TF enabled. As a result,
update invalid PTE flags settings which works for both TF enabled
and disabled case.
Fixes: 352e683b72 ("drm/amdgpu: Enable translate_further to extend UTCL2 reach")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is not necessary to go through the process of validation, linking of
queues to mdev and vice versa and filtering the APQNs assigned to the
matrix mdev to build an AP configuration for a guest if an adapter or
domain being assigned is already assigned to the matrix mdev. Likewise, it
is not necessary to proceed through the process the unassignment of an
adapter, domain or control domain if it is not assigned to the matrix mdev.
Since it is not necessary to process assignment of a resource already
assigned or process unassignment of a resource that is been assigned,
this patch will bypass all assignment/unassignment operations for an
adapter, domain or control domain under these circumstances.
Not only is assignment of a duplicate adapter or domain unnecessary, it
will also cause a hang situation when removing the matrix mdev to which it is
assigned. The reason is because the same vfio_ap_queue objects with an
APQN containing the APID of the adapter or APQI of the domain being
assigned will get added multiple times to the hashtable that holds them.
This results in the pprev and next pointers of the hlist_node (mdev_qnode
field in the vfio_ap_queue object) pointing to the queue object itself
resulting in an interminable loop when the mdev is removed and the queue
table is iterated to reset the queues.
Cc: stable@vger.kernel.org
Fixes: 11cb2419fa ("s390/vfio-ap: manage link between queue struct and matrix mdev")
Reported-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
A couple years back we went through the kernel an automatically
converted size calculations to use struct_size() instead. The
struct_size() calculation is protected against integer overflows.
However it does not make sense to use the result from struct_size()
for additional math operations as that would negate any safeness.
Fixes: 1f3b69b6b9 ("i2c: mux: Use struct_size() in devm_kzalloc()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The i2c-mlxbf.c driver is currently broken because there is a bug
in the calculation of the frequency. core_f, core_r and core_od
are components read from hardware registers and are used to
compute the frequency used to compute different timing parameters.
The shifting mechanism used to get core_f, core_r and core_od is
wrong. Use FIELD_GET to mask and shift the bitfields properly.
Fixes: b5b5b32081 (i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC)
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
It needs to enter the namespace before reading a file.
Fixes: 4183a8d70a ("perf tools: Allow synthesizing the build id for kernel/modules/tasks in PERF_RECORD_MMAP2")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220920222822.2171056-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
7df548840c ("x86/bugs: Add "unknown" reporting for MMIO Stale Data")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Link: https://lore.kernel.org/lkml/YysTRji90sNn2p5f@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
/proc/kallsyms and /proc/modules are compared before and after the copy
in order to ensure no changes during the copy.
However /proc/modules also might change due to reference counts changing
even though that does not make any difference.
Any modules loaded or unloaded should be visible in changes to kallsyms,
so it is not necessary to check /proc/modules also anyway.
Remove the comparison checking that /proc/modules is unchanged.
Fixes: fc1b691d76 ("perf buildid-cache: Add ability to add kcore to the cache")
Reported-by: Daniel Dao <dqminh@cloudflare.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Daniel Dao <dqminh@cloudflare.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220914122429.8770-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With mixed per-thread and (system-wide) per-cpu maps, the "any cpu" value
-1 must be skipped when setting CPU mask bits.
Prior to commit cbd7bfc7fd ("tools/perf: Fix out of bound access
to cpu mask array") the invalid setting went unnoticed, but since then
it causes perf record to fail with an error.
Example:
Before:
$ perf record -e intel_pt// --per-thread uname
Failed to initialize parallel data streaming masks
After:
$ perf record -e intel_pt// --per-thread uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.068 MB perf.data ]
Fixes: ae4f8ae16a ("libperf evlist: Allow mixing per-thread and per-cpu mmaps")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220915122612.81738-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It uses PERF_EVENT_IOC_MODIFY_ATTRIBUTES ioctl. The kernel would return
ENOTTY if it's not supported. Update the skip reason in that case.
Committer notes:
On s/390 the args aren't used, so need to be marked __maybe_unused.
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20220914183338.546357-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Various fixes for build warnings
- Fix default kernel command line
-----BEGIN PGP SIGNATURE-----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=iNUZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML fixes from Richard Weinberger:
- Various fixes for build warnings
- Fix default kernel command line
* tag 'for-linus-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
arch: um: Mark the stack non-executable to fix a binutils warning
um: Prevent KASAN splats in dump_stack()
um: fix default console kernel parameter
um: Cleanup compiler warning in arch/x86/um/tls_32.c
um: Cleanup syscall_handler_t cast in syscalls_32.h
Including:
- Two fixes for Intel VT-d:
- Check the right capability bit for 5-level page table support.
- Revert a previous fix which caused a regression with Thunderbolt
devices.
-----BEGIN PGP SIGNATURE-----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=sUtt
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"Two fixes for Intel VT-d:
- Check the right capability bit for 5-level page table support.
- Revert a previous fix which caused a regression with Thunderbolt
devices"
* tag 'iommu-fixes-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Check correct capability for sagaw determination
Revert "iommu/vt-d: Fix possible recursive locking in intel_iommu_init()"
A bit more changes than wished, but still manageable ammount.
Most of commits are HD-audio specific device fixes / quirks, while
there is a revert for the previous fix due to regressions and a
double-free fix in ALSA core code.
-----BEGIN PGP SIGNATURE-----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=5FVb
-----END PGP SIGNATURE-----
Merge tag 'sound-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A bit more changes than wished, but still manageable amount.
Most of commits are HD-audio specific device fixes / quirks, while
there is a revert for the previous fix due to regressions and a
double-free fix in ALSA core code"
* tag 'sound-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
Revert "ALSA: usb-audio: Split endpoint setups for hw_params and prepare"
ALSA: core: Fix double-free at snd_card_new()
ALSA: hda/realtek: Add a quirk for HP OMEN 16 (8902) mute LED
ALSA: hda/hdmi: Fix the converter reuse for the silent stream
ALSA: hda/realtek: Add quirk for ASUS GA503R laptop
ALSA: hda/realtek: Add pincfg for ASUS G533Z HP jack
ALSA: hda/realtek: Add pincfg for ASUS G513 HP jack
ALSA: hda/realtek: Re-arrange quirk table entries
ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5530 laptop
ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5570 laptop
ALSA: hda: Fix Nvidia dp infoframe
ALSA: hda/realtek: Add quirk for Huawei WRT-WX9
ALSA: hda/tegra: set depop delay for tegra
ALSA: hda: add Intel 5 Series / 3400 PCI DID
ALSA: hda: Fix hang at HD-audio codec unbinding due to refcount saturation
The kvm registration hooks must be registered even if the facilities
necessary for zPCI interpretation are unavailable, as vfio-pci-zdev will
expect to use the hooks regardless.
This fixes an issue where vfio-pci-zdev will fail its open function
because of a missing kvm_register when running on hardware that does not
support zPCI interpretation.
Fixes: ca922fecda ("KVM: s390: pci: Hook to access KVM lowlevel from VFIO")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Link: https://lore.kernel.org/r/20220920193025.135655-1-mjrosato@linux.ibm.com
Message-Id: <20220920193025.135655-1-mjrosato@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
The GAIT and all of its entries must be represented by physical
addresses as this structure is shared with underlying firmware.
We can keep a virtual address of the GAIT origin in order to
handle processing in the kernel, but when traversing the entries
we must again convert the physical AISB stored in that GAIT entry
into a virtual address in order to process it.
Note: this currently doesn't fix a real bug, since virtual addresses
are indentical to physical ones.
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Acked-by: Nico Boehr <nrb@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20220907155952.87356-1-mjrosato@linux.ibm.com
Message-Id: <20220907155952.87356-1-mjrosato@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Ard Biesheuvel