Expecting CHV power wells to be just an extended versions of the VLV
power wells, a bunch of commented out power wells were added in
anticipation when Punit folks would implement it all. Turns out they
never did, and instead CHV has fewer power wells than VLV. Rip out all
the #if 0'ed junk that's not needed.
v2: Rename the "pipe-a" well to "display" to match VLV
Clarify the pipe A power well relationship to pipes B and C (Deepak)
Reviewed-by: Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Not sure which LDO programming sequence delay should be used for the CHV
PHY, but the spec says that 600ns is "Used by default for initial
bringup", and the BIOS seems to use that, so let's do the same.
Reviewed-by: Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The value was much too low, which could cause the userspace visible
vblank counter to move backwards when the hardware counter wrapped
around.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is theoretically possible that a swapped out BO gets the
same GTT address, but different backing pages while being swapped in.
Instead just use another VA state to note updated areas.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
here's a drm regression fix for drivers only partially
converted to atomic.
* tag 'topic/drm-fixes-2015-05-27' of git://anongit.freedesktop.org/drm-intel:
drm/plane-helper: Adapt cursor hack to transitional helpers
commit 53292cdb06 ("drm/i915: Workaround
to avoid lite restore with HEAD==TAIL") added a check for req0 != null
which is unnecessary.
The only way req0 could be null is if the list was empty, and this is
already addressed at the beginning of execlists_context_unqueue().
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
dev->max_vblank_count contains the largest value that can be represented
by the hardware counter. When the hardware counter wraps around, we have
to add that value + 1 to get the same value as if the hardware counter
didn't wrap around.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If I read Documentation/kbuild/makefiles.txt section 3.6 right, this
patch should not be needed. However, without this patch the objects
needed for DRM_TILCDC_SLAVE_COMPAT are not linked, if DRM_TILCDC is
built as module.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Adds a CONFIG_DRM_TILCDC_SLAVE_COMPAT module for "ti,tilcdc,slave"
node conversion. The implementation is in tilcdc_slave_compat.c and it
uses tilcdc_slave_compat.dts as a basis for creating a DTS
overlay. The DTS overlay adds an external tda998x encoder to tilcdc
that corresponds to the old tda998x based slave encoder.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
tilcdc calls runtime PM get/put functions everywhere. Some of those
places will be called in irq context, crashing the driver.
As a quick fix, use pm_runtime_irq_safe() for tilcdc.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Add support for an external compontised DRM encoder. The external
encoder can be connected to tilcdc trough device tree graph binding.
The binding document for tilcdc has been updated. The current
implementation supports only tda998x encoder.
To be able to filter out the unsupported video modes the tilcdc driver
needs to hijack the external connectors helper functions. The tilcdc
installes new helper functions that are otherwise identical to
orignals, but the mode_valid() call-back check the mode first localy,
before calling the original call-back. The tilcdc dirver restores the
original helper functions before it is unbound from the external
device.
I got the idea and some lines of code from Jean-Francois Moine's
"drm/tilcdc: Change the interface with the tda998x driver"-patch.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Remove tilcdc slave support for tda998x driver. The tilcdc slave
support would conflicts with componentized use of tda998x.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Force crtc dpms off before destroying the crtc instead of just
checking the dpms state. This fixes warning message and frozen picture
after tilcdc module unloading.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
In commit 1854d5ca0d
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Apr 7 16:20:32 2015 +0100
drm/i915: Deminish contribution of wait-boosting from clients
we removed an atomic timer based check for allowing waitboosting and
moved it below the mutex taken during RPS. However, that mutex can be
held for long periods of time on Vallyview/Cherryview as communication
with the PCU is slow. As clients may frequently wait for results (e.g.
such as tranform feedback) we introduced contention between the client
and the RPS worker. We can take advantage of the RPS worker, by
switching the wait boost decision to use spin locks and defer the
actual reclocking to the worker.
Fixes a regression of up to 45% on Baytrail and Baswell!
v2 (Daniel):
- Use max_freq_softlimit instead of the not-yet-merged boost
frequency.
- Don't inject a fake irq into the boost work, instead treat
client_boost as just another legit waker.
v3: Drop the now unused mask (Chris).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90112
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since we are messing with state in the worker.
v2: drop the changes in the mst worker
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Use the generic mechanism to declare a bitmap instead of unsigned long.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some of the vce clocks are automatic, others need to
be manually enabled. For ease, just disable cg when
vce is active.
v2: rebased, call vce_v1_0_enable_mgcg directly
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initial support for VCE 1.0 using newest firmware.
v2: rebased
v3: fix for TN
v4: fix FW size calculation
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For setting clocks with VCE v1.0
v2: (chk) rebased on current tree
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They seem to work fine with the kernel interface.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously we were completely over allocating, fix this
by actually implementing the size calculation.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Userspace will be able to tell whether a GPU reset occured by comparing
an old referece value of the counter with a new value.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Atomic modesetting: now with modesetting support.
v2: Moved drm_atomic_set_mode_prop_for_crtc from previous patch; removed
state->active fiddling, documented return code. Changed property
type to DRM_MODE_PROP_BLOB.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a blob property tracking the current mode to the CRTC state, and
ensure it is properly updated and referenced.
v2: Continue using crtc_state->mode inside getcrtc, instead of reading
out the mode blob. Use IS_ERR and PTR_ERR from create_blob. Move
set_mode_prop_for_crtc to later patch where it actually gets used.
Enforce !!state->enable == !!state->mode_blob inside
drm_atomic_crtc_check.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a new helper, to be used later for blob property management, that
sets the mode for a CRTC state, as well as updating the CRTC enable/active
state at the same time.
v2: Do not touch active/mode_changed in CRTC state. Document return
value. Remove stray drm_atomic_set_mode_prop_for_crtc declaration.
v3: Remove i915 changes, and leave it directly bashing crtc_state->mode
for the meantime.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Unfortunately old userspace didn't clear this properly, but since
we've added fb modifiers that's fixed. Checking properly that unused
fields is important for abi extensions, and just right now there's a
bunch of discussions going on about how exactly the additional aux
planes for render compression should be specified.
So let's first make sure that the values in those additional fields
can be indeed used.
Cc: Thierry Reding <thierry.reding@gmail.com>
Testcase: igt/kms_addfb/unused-*
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
When we look up a blob property, make sure we retain a reference to the
blob for the lifetime.
v2: Use DRM_MODE_PROP_BLOB, not PROP_OBJECT + OBJECT_BLOB.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
For actual sharing of buffers with other drivers (ie. actual hardware)
we'll need to pimp things out a bit better to deal w/ caching, multiple
memory domains, etc. See thread:
http://lists.freedesktop.org/archives/dri-devel/2015-May/083160.html
But for the llvmpipe use-case this isn't a problem. Nor do we really
need prime/dri3 (dri2 is sufficient). So until the other issues are
sorted lets remove DRIVER_PRIME.
v2: also drop the dead code
[airlied:
Okay I'm convinced this API could have a lot of use cases
that are really really bad, yes the upload use case is valid
however that isn't the only use case enabled, and if we allow
all the other use cases, people will start to (ab)use them,
and then they'll be ABI and my life will get worse, so disable
PRIME for now]
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This reverts commit 118182e9d7.
It's causing too much trouble when compile-testing for non-i915 folks.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
If we have more than one CRTCs in a group pre-associate planes 0-3 with
CRTC 0 and planes 4-7 with CRTC 1 to minimize flicker occurring when the
association is changed. The pre-association could be controlled by a
module parameter if needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The number of CRTCs in a group is only used to implement plane
initialization for now, but is also needed to implement pre-association
of planes to CRTCs. Store it in the group structure instead of computing
it on demand.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Hardware planes are driven by the timing generator of the CRTC they are
associated to. Changing the association requires restarting the CRTC
group that the plane belongs to, resulting in flicker on the other CRTC.
To avoid flicker as much as possible, try to allocate planes first from
the free planes already associated with the target CRTC. If allocation
fails then fall back to allocation from all free planes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Changing the plane to CRTC associations requires restarting the CRTC
group, creating visible flicker. Mitigate the issue by changing plane
association only when a plane becomes enabled, not when it get disabled.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Plane allocation is a complex process, add debugging statements to help
finding out what could might wrong.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
All other cast functions are named without using "du", make the plane
state cast consistent with them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The rcar_du_planes structure contains a single field and is only
instantiated in the rcar_du_group structure. Embed it directly and
remove the rcar_du_planes structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The plane property objects are instantiated once per CRTC group, while
they should be instantiated once globally for the device. Fix this and
move them to the rcar_du_device structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The ADV7511 is probed before its slave encoder init function associates
it with an encoder. This creates a time window during which hot plug
detection interrupts can occur with an encoder, resulting in a crash in
the IRQ handler.
Fix this by ignoring hot plug detection IRQs when no encoder is
associated yet.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Add an ioctl which allows users to create blob properties from supplied
data. Currently this only supports modes, creating a drm_display_mode from
the userspace drm_mode_modeinfo.
v2: Removed size/type checks.
Rebased on new patches to allow error propagation from create_blob,
as well as avoiding double-allocation.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Tested-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Change drm_property_create_blob to return an ERR_PTR-encoded error on
failure, so we can pass the failure reason down.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Maarten Lankhorst <maarten.lankhorst@intel.com>
Tested-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make the data parameter to drm_property_create_blob optional; if
omitted, the copy will be skipped and the data will be empty.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Tested-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Move the drm_display_mode <-> drm_mode_modeinfo conversion functions
from drm_crtc.c to drm_modes.c, and make them non-static so that others
can use them.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The only user of convert_umode was also performing mode validation, so
do that in the same place.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rather than open-coding our own CRTC state helpers, use the atomic helpers
added in f5e7840b0c, and make our freeing behaviour consistent as well.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Change '@param foo' to '@foo:' to fit kerneldoc style.
672cb1d6ae mistakenly added an extra parameter to the kerneldoc for
drm_property_unreference_blob which wasn't actually present.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As Daniel commented on
commit b7ffe1362c5f468b853223acc9268804aa92afc8
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon Apr 27 13:41:24 2015 +0100
drm/i915: Free RPS boosts for all laggards
it is better to be explicit when sharing hardcoded values such as
throttle/boost timeouts. Make it so!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
After allocating from the slab cache, we then need to free the request
back into the slab cache upon error (and not call kfree as that leads
to eventual memory corruption).
Fixes regression from
commit efab6d8dd1
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Apr 7 16:20:57 2015 +0100
drm/i915: Use a separate slab for requests
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There is a mplayer video failure reported with xv.
This is because there is a request to do both plane scaling
and colorkey. Because skl hw doesn't support plane scaling
and colorkey at the same time, request is failed which is expected
behavior.
To make xv operate, this patch allows colorkey continue to work
without using scaler. Then behavior would be similar to platforms
without plane scaler support.
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90449
[danvet: change can_scale to bool as requested by Ville.]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
GTT caching was disabled by default on gen8 due to not working with
big pages. Some information suggests that it got fixed, but still
GTT caching has been left disabled by default. Or could be it just
meant that the default was changed to off, and hence the problem
got solved.
Enable GTT caching in the hopes of some performance increase.
Whether or not the big pages issue has been fixed is irrelevant
at this stage since we don't use big pages.
This gives me a 1-2% improvement in xonotic on my BSW. Haven't tried
BDW, but supposedly it has larger TLBs so might not benefit as much.
On HSW GTT caching is enabled by default.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
GEN8_L3SQCREG1 isn't saved in the context (verified by going through
a context dump), and so we shouldn't be using the ring w/a code to
initialize it. Also Bspec explicitly talks about MMIO and writing it
with the CPU.
Additionally there's another w/a WaTempDisableDOPClkGating:bdw which
tells us to disable DOP clock gating around the GEN8_L3SQCREG1 write
to make sure everyone notices the change. So let's do that as well.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We're not using ilk_init_lp_watermarks() on BDW for some reason.
Probably due to the BDW patches and the relevant WM patches landing
roughlly at the same time. Fix it up.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In
commit f02ad907cd
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jan 22 16:36:23 2015 +0100
drm/atomic-helpers: Recover full cursor plane behaviour
we've added a hack to atomic helpers to never to vblank waits for
cursor updates through the legacy apis since that's what X expects.
Unfortunately we've (again) forgotten to adjust the transitional
helpers. Do this now.
This fixes regressions for drivers only partially converted over to
atomic (like i915).
Reported-by: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-and-tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Just two small DP fixes for 4.1
* 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: fix error flag checking in native aux path
drm/radeon: retry dcpd fetch
There's a stable backport from Ander [1] that combines this and a few
other commits to fix the flickering on v4.0, reported in [2] among
others. Having this upstream is obviously a requirement for stable.
* tag 'drm-intel-fixes-2015-05-21' of git://anongit.freedesktop.org/drm-intel:
drm/i915: fix screen flickering
Bspec says we should disable the FDI RX/TX before disabling the PCH
ports. Do so.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Follow the BSpec sequence for the CRT port as well on PCH platforms,
ie. disable the pipe before the port.
Didn't bother looking at DDI in detail yet, so leave that one be even
though the CRT is a PCH port there.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
While at it also remove the redundant/unneeded w/a like done for hdmi
already.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Mention that this also removes the unneeded w/a, as suggested
by Jesse.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
BSpec says we should disable all ports after the pipe on PCH
platforms. Do so. Fixes a pipe off timeout on ILK now caused by
the transcoder B workaround.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently the IBX transcoder B workarounds are not working correctly.
Well, the HDMI one seems to be working somewhat, but the DP one is
definitely busted.
After a bit of experimentation it looks like the best way to make this
work is first disable the port on transcoder B, and then re-enable it
transcoder A, and immediately disable it again.
We can also clean up the code by noting that we can't be called without
a valid crtc. And also note that port A on ILK does not need the
workaround, so let's check for that one too.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On IBX the SDVO/HDMI register write may be masked when enabling the
port, so it may need to written twice. The HDMI code does this, but
the SDVO code does not. Add the workaround to the SDVO code as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently we're always enabling enhanced framing on CPT even if the sink
doesn't support it. Fix this up by actaully looking at what the sink
tells us.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Define a TRANS_DP_PIPE_TO_PORT() to make the CPT DP .get_hw_state()
pipe readout neater.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
intel_dp.c is a mess with all the checks for different
platform/PCH variants and ports. Try to clean it up by recognizing
the following facts:
- IVB port A, and CPT port B/C/D are always the special cases
- VLV/CHV don't have port A
- Using the same kind of logic everywhere makes things much easier to
parse
So let's move the IVB port A and PCH port B/C/D checks to be done first,
and let the other cases fall through, and always check for these things
using the same logic.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
IBX can have problems with the first write to the port register getting
masked when enabling the port. We are trying to apply the workaround
also when disabling the port where it's not needed, and we also try
to apply it for CPT/PPT as well which don't need it. Just kill it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Resolve conflict with the remove CHV if block.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The IBX 12bpc port enable toggle is only relevant when enabling
the port, not when disabling it. Also this code doesn't actually
toggle anything, and essentially just writes the port register
one extra time. Furthermore CPT/PPT don't need such workarounds
and yet we include them. Just kill it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We need to re-init the display hardware when going out of suspend. This
includes:
- Hooking the PCH to the reset logic
- Restoring CDCDLK
- Enabling the DDB power
Among those, only the CDCDLK one is a bit tricky. There's some
complexity in that:
- DPLL0 (which is the source for CDCLK) has two VCOs, each with a set
of supported frequencies. As eDP also uses DPLL0 for its link rate,
once DPLL0 is on, we restrict the possible eDP link rates the chosen
VCO.
- CDCLK also limits the bandwidth available to push pixels.
So, as a first step, this commit restore what the BIOS set, until I can
do more testing.
In case that's of interest for the reviewer, I've unit tested the
function that derives the decimal frequency field:
#include <stdio.h>
#include <stdint.h>
#include <assert.h>
#define ARRAY_SIZE(x) (sizeof(x) / sizeof(*(x)))
static const struct dpll_freq {
unsigned int freq;
unsigned int decimal;
} freqs[] = {
{ .freq = 308570, .decimal = 0b01001100111},
{ .freq = 337500, .decimal = 0b01010100001},
{ .freq = 432000, .decimal = 0b01101011110},
{ .freq = 450000, .decimal = 0b01110000010},
{ .freq = 540000, .decimal = 0b10000110110},
{ .freq = 617140, .decimal = 0b10011010000},
{ .freq = 675000, .decimal = 0b10101000100},
};
static void intbits(unsigned int v)
{
int i;
for(i = 10; i >= 0; i--)
putchar('0' + ((v >> i) & 1));
}
static unsigned int freq_decimal(unsigned int freq /* in kHz */)
{
return (freq - 1000) / 500;
}
static void test_freq(const struct dpll_freq *entry)
{
unsigned int decimal = freq_decimal(entry->freq);
printf("freq: %d, expected: ", entry->freq);
intbits(entry->decimal);
printf(", got: ");
intbits(decimal);
putchar('\n');
assert(decimal == entry->decimal);
}
int main(int argc, char **argv)
{
int i;
for (i = 0; i < ARRAY_SIZE(freqs); i++)
test_freq(&freqs[i]);
return 0;
}
v2:
- Rebase on top of -nightly
- Use (freq - 1000) / 500 for the decimal frequency (Ville)
- Fix setting the enable bit of HSW_NDE_RSTWRN_OPT (Ville)
- Rename skl_display_{resume,suspend} to skl_{init,uninit}_cdclk to
be consistent with the BXT code (Ville)
- Store boot CDCLK in ddi_pll_init (Ville)
- Merge dev_priv's skl_boot_cdclk into cdclk_freq
- Use LCPLL_PLL_LOCK instead of (1 << 30) (Ville)
- Replace various '0' by SKL_DPLL0 to be a bit more explicit that
we're programming DPLL0
- Busy poll the PCU before doing the frequency change. It takes about
3/4 cycles, each separated by 10us, to get the ACK from the CPU
(Ville)
v3:
- Restore dev_priv->skl_boot_cdclk, leaving unification with
dev_priv->cdclk_freq for a later patch (Daniel, Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If the client stalls on a congested request, chosen to be 20ms old to
match throttling, allow the client a free RPS boost.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: s/rq/req/]
[danvet: s/0/NULL/ reported by 0-day build]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
That atom table does not check these bits. Fixes aux
regressions on some boards.
Reported-by: Malte Schröder <malte@tnxip.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
If we have clients stalled waiting for requests, ignore the GPU if it
signals that it should downclock due to low load. This helps prevent
the automatic timeout from causing extremely long running batches from
taking even longer.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that we have internal clients, rather than faking a whole
drm_i915_file_private just for tracking RPS boosts, create a new struct
intel_rps_client and pass it along when waiting.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: s/rq/req/]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since we will often pageflip to an active surface, we will often have to
wait for the surface to be written before issuing the flip. Also we are
likely to wait on that surface in plenty of time before the vblank.
Since we have a mechanism for boosting when a flip misses the expected
vblank, curtain the number of times we RPS boost when simply waiting for
mmioflip.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: s/rq/req/]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ring switches can occur many times per frame, and are often out of
control, causing frequent RPS boosting for no practical benefit. Treat
the sw semaphore synchronisation as a separate client and only allow it
to boost once per busy/idle cycle.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: s/rq/req/]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This trims a little overhead from the common case of not needing to
synchronize between rings.
v2: execlists is special and likes to duplicate code.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently, we only track the last request globally across all engines.
This prevents us from issuing concurrent read requests on e.g. the RCS
and BCS engines (or more likely the render and media engines). Without
semaphores, we incur costly stalls as we synchronise between rings -
greatly impacting the current performance of Broadwell versus Haswell in
certain workloads (like video decode). With the introduction of
reference counted requests, it is much easier to track the last request
per ring, as well as the last global write request so that we can
optimise inter-engine read read requests (as well as better optimise
certain CPU waits).
v2: Fix inverted readonly condition for nonblocking waits.
v3: Handle non-continguous engine array after waits
v4: Rebase, tidy, rewrite ring list debugging
v5: Use obj->active as a bitfield, it looks cool
v6: Micro-optimise, mostly involving moving code around
v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf)
v8: Rebase
v9: Refactor i915_gem_object_sync() to allow the compiler to better
optimise it.
Benchmark: igt/gem_read_read_speed
hsw:gt3e (with semaphores):
Before: Time to read-read 1024k: 275.794µs
After: Time to read-read 1024k: 123.260µs
hsw:gt3e (w/o semaphores):
Before: Time to read-read 1024k: 230.433µs
After: Time to read-read 1024k: 124.593µs
bdw-u (w/o semaphores): Before After
Time to read-read 1x1: 26.274µs 10.350µs
Time to read-read 128x128: 40.097µs 21.366µs
Time to read-read 256x256: 77.087µs 42.608µs
Time to read-read 512x512: 281.999µs 181.155µs
Time to read-read 1024x1024: 1196.141µs 1118.223µs
Time to read-read 2048x2048: 5639.072µs 5225.837µs
Time to read-read 4096x4096: 22401.662µs 21137.067µs
Time to read-read 8192x8192: 89617.735µs 85637.681µs
Testcase: igt/gem_concurrent_blit (read-read and friends)
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8]
[danvet: s/\<rq\>/req/g]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The merged seqno->request conversion from John called request
variables req, but some (not all) of Chris' recent patches changed
those to just rq. We've had a lenghty (and inconclusive) discussion on
irc which is the more meaningful name with maybe at most a slight bias
towards req.
Given that the "don't change names without good reason to avoid
conflicts" rule applies, so lets go back to a req everywhere for
consistency. I'll sed any patches for which this will cause conflicts
before applying.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: John Harrison <John.C.Harrison@Intel.com>
[danvet: s/origina/merged/ as pointed out by Chris - the first
mass-conversion patch was from Chris, the merged one from John.]
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
v2:
- set the override disable flag too on stepping F0 (mika)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On B0 and C0 steppings the workaround enable bit would be overriden by
default, so the overriding must be disabled.
The WA was added in
commit 83a24979c4
Author: Nick Hoath <nicholas.hoath@intel.com>
Date: Fri Apr 10 13:12:26 2015 +0100
drm/i915/bxt: Add WaForceContextSaveRestoreNonCoherent
Spotted-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add DOC sections giving an overview of drm_bridge and how to fill up the
drm_bridge_funcs ops. Add these to drm.tpml in DocBook.
Add headerdocs for funcs in drm_bridge.c that don't have them yet.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
[danvet: Amend kerneldoc as discussed with Archit.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Allow drm_bridge objects to link to each other in order to form an encoder
chain. The requirement for creating a chain of bridges comes because the
MSM drm driver uses up its encoder and bridge objects for blocks within
the SoC itself. There isn't anything left to use if the SoC display output
is connected to an external encoder IC. Having an additional bridge
connected to the existing bridge helps here. In general, it is possible for
platforms to have multiple devices between the encoder and the
connector/panel that require some sort of configuration.
We create drm bridge helper functions corresponding to each op in
'drm_bridge_funcs'. These helpers call the corresponding
'drm_bridge_funcs' op for the entire chain of bridges. These helpers are
used internally by drm_atomic_helper.c and drm_crtc_helper.c.
The drm_bridge_enable/pre_enable helpers execute enable/pre_enable ops of
the bridge closet to the encoder, and proceed until the last bridge in the
chain is enabled. The same holds for drm_bridge_mode_set/mode_fixup
helpers. The drm_bridge_disable/post_disable helpers disable the last
bridge in the chain first, and proceed until the first bridge in the chain
is disabled.
drm_bridge_attach() remains the same. As before, the driver calling this
function should make sure it has set the links correctly. The order in
which the bridges are connected to each other determines the order in which
the calls are made. One requirement is that every bridge in the chain
should point the parent encoder object. This is required since bridge
drivers expect a valid encoder pointer in drm_bridge. For example, consider
a chain where an encoder's output is connected to bridge1, and bridge1's
output is connected to bridge2:
/* Like before, attach bridge to an encoder */
bridge1->encoder = encoder;
ret = drm_bridge_attach(dev, bridge1);
..
/*
* set the first bridge's 'next' bridge to bridge2, set its encoder
* as bridge1's encoder
*/
bridge1->next = bridge2
bridge2->encoder = bridge1->encoder;
ret = drm_bridge_attach(dev, bridge2);
...
...
This method of bridge chaining isn't intrusive and existing drivers that
use drm_bridge will behave the same way as before. The bridge helpers also
cleans up the atomic and crtc helper files a bit.
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Our driver compiles clean (nowadays thanks to 0day) but for me, at least,
it would be beneficial if the compiler threw an error rather than a
warning when it found a piece of suspect code. (I use this to
compile-check patch series and want to break on the first compiler error
in order to fix the patch.)
v2: Kick off a new "Debugging" submenu for i915.ko
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
[danvet: Add "DRM i915" to the menu name as requested by Chris.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Drivers may need to recalculate plane state when a modeset occurs,
not reliably adding them might cause hard to debug bugs.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is a convenience function to add all planes for a crtc,
similar to add_affected_connectors. This will be used in
drm_atomic_helper_check_modeset, but drivers can call it too
when they need to recalculate all state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[danvet: Amend kerneldoc a bit.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm_atomic_helper_commit_planes calls all atomic_begin's first,
then updates all planes, finally calling atomic_flush.
Some drivers may want to things like disabling irq's
from their atomic_begin, in which case a second call to atomic_begin
will splat. By using commit_planes_on_crtc on each crtc in the
atomic state they'll evade that issue.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[danvet: Extend kerneldoc a bit as discussed with Maarten on irc.]
[danvet: Squash in fixup to check for crtc_funcs in all places.
Reported by Dan Carpenter.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The index of ->planes[] array (3rd parameter) cannot be equal to MAX_PLANE.
This looks like a typo that is now fixed.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Stephen Rothwell reports that he sees a compiler warning on x86_64:
drivers/gpu/drm/i2c/tda998x_drv.c: In function 'tda998x_write_avi':
drivers/gpu/drm/i2c/tda998x_drv.c:647:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'ssize_t' [-Wformat=]
dev_err(&priv->hdmi->dev, "hdmi_avi_infoframe_pack() failed: %d\n", len);
^
Fix this by using the appropriate length modifier.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The macros we use there are the magic ones that can take either dev or
dev_priv. We'd like to move as much as possible towards dev_priv though.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently bxt_resume_prepare() is only used in the runtime-resume path.
Add it to the full S3/S4 path as well.
v2: Rebase on top of the vlv_resume_prepare() shuffling around
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com> (v1)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since DRM_ROTATE is counter clockwise (which is compliant with Xrandr),
and HW rotation is clockwise, swapping 90/270 to work as expected from
userspace.
v2: Rebased
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Explain why a few fields of the new pipe_config have their values
preserved, while the others are zeroed.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Also make the WA comment consistent with the rest, where the stepping
info is not shown.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
ARGB8888 is used for cursors on all platforms so we need to allow it
everywhere.
ABGR8888 is currently only honoured:
- on VLV/CHV in sprite planes
- on SKL+ for primary and sprite planes
so only allow it for those platforms.
Note that we only support ARGB8888/ABGR8888 on the primary plane for
SKL/BXT because we have in line of sight the pipe bottom color on those
platforms and because the primary plane programming on VLV/CHV doesn't
anything different for those formats today.
v2: Fix the logic to forbid the creation ABGR2101010 fbs (Ville)
v3: Still allow the creation of ARGB8888 fbs now that cursor planes use
real fb objects (found by PRTS).
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Making lane stagger calculation common for HDMI and DP
v2: Imre's comments addressed
- Remove lane stagger from bxt_clk_div and make it a local variable in
ddi_pll_select
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
BUN 1: prop_coeff, int_coeff, tdctargetcnt programming updated and tied to
VCO frequencies. Program i_lockthresh in PORT_PLL_9.
VCO calculated based on the formula:
Desired Output = Port bit rate in MHz (DisplayPort HBR2 is 5400 MHz)
Fast Clock = Desired Output / 2
VCO = Fast Clock * P1 * P2
Prop_coeff, int_coeff, and tdctargetcnt modified according to above
calculation.
BUN 2: Port PLLs require additional programming at certain frequencies -
DCO amplitude in PORT_PLL_10
Review comments from Siva which were addressed in the initial version of the
patch.
- Change PORT_PLL_LOCK_THRESHOLD to PORT_PLL_LOCK_THRESHOLD_MASK
- Calculate for HDMI
- Correct values for vco = 5.4
- return in case of invalid vco range
v2: Imre's review comments addressed
- change dcoampovr_en to dcoampovr_en_h
- change PORT_PLL_DCO_AMP_OVR_EN to PORT_PLL_DCO_AMP_OVR_EN_H
- Correct lane stagger value for 324MHz
- Make coef common for HDMI and DP
- remove superfluous comments
v3: Imre's comments addressed
- Remove Prop_coeff, int_coeff, tdctargetcnt, dcoampovr_en, gain_ctl,
dcoampovr_en_h from bxt_clk_div and make them local variables.
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> [v1]
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Be in line with other features that we have.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We just have have VLV and CHV sprites programming the hardware
differently for the ABGR2101010 so keep them working.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
That define makes it hard to figure out what is the actual list of
formats at a glance. Expand it then.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika encountered one pathological scenario under X where acquiring all
the mm locks (required to insert a mmu notifier) was very slow, so slow
that by the time we tried to lock the struct_mutex with the usual call
to i915_mutex_lock_interruptible(), X's signal timer had fired causing
us to restart the ioctl (and so looped indefinitely).
While I suspect this is the result of another bug (something leaking mm
perhaps?) we can forgo the error checking and interuptible nature of the
lock here so we only have to pay the expense once and get on with it.
This does expose the userptr creation routine to a driver livelock
though by not being interruptible.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
[danvet: Init ret to avoid issues reported by PRTS.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When the modeset code is reached with a CRTC that only needs a flip, the
code that assigns PLLs is skipped. But since there is still a state swap
for that CRTC, the current PLL assignment needs to be preserved. I
missed the ddi_pll_sel field in the following commit, which causes
warnings in DDI platforms.
commit 4978cc93d9
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Tue Apr 21 17:13:21 2015 +0300
drm/i915: Preserve shared DPLL information in new pipe_config
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90410
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In the following commit, the place where the contents of dpll_hw_state
in crtc_state where zeroed was changed. Prior to that commit, it
happened when the new state was allocated, but now that happens just
before the call the .crtc_compute_clock() hook. The DP code for SKL,
however, sets up the (private) PLL in the encoder compute config
function that has already run by the time that memset() is reached,
causing the previous value to be lost.
This patch fixes the issue by moving the memset() down the call chain,
so that it is only called if the values in dpll_hw_state are going to be
updated.
commit 4978cc93d9
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Tue Apr 21 17:13:21 2015 +0300
drm/i915: Preserve shared DPLL information in new pipe_config
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90462
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Reported-and-tested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add one explicit discard of __iomem address space qualifier in
validate_vbt(), and respect it otherwise. This adds clarity in the code,
and reduces the sparse warnings from the module to just one.
Quoting Daniel, "The vbt really is plain old memory. Except that it's
reserved in the e820 table as something special and hence treated as io
range by the kernel. But it is memory, hence casting away the __iomem is
imo the right approach."
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just so it is grouped logically in line with other data and makes a
rather verbose output a bit shorter.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chandra Konduru <chandra.konduru@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We never pass a non-NULL vbt to validate_vbt, and we can safely expect
the callers to not change.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville noticed in another patch we we didn't need them at all, so remove
them. It's worth saying that it makes no difference to code generated as
gcc is clever enough to optimize it out.
v2: Remove 'break' after 'return' in switches (Ville)
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently DSI PLL N1 is hardcoded off. Make it possible to use it
later. This should have no functional changes for now.
v2: s/ffz(~(n))/ffs(n) - 1/ (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Added docbook info regarding context save and restore (CSR)
firmware support added from gen9 onwards to drive newly added
DMC (Display microcontroller) in display engine.
v1: Initial version as RFC.
v2: Used "DOC:" tag for csr description based on review comment from Daniel.
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reading from disconnected ports will spit out timeout error
on the dmesg. Skip the attempted read if the port is not
connected and avoid confusing users/testcases about
expected timeouts.
This new dpcd debugfs entry was introduced by commit aa7471d228
("drm/i915: add i915 specific connector debugfs file for DPCD")
v2 by Jani: move the check at the top, out of the loop.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90060
Tested-by: yex.tian@intel.com
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There is an extra semi-colon on the if statement so the debug output
always says "Failed to write EDID checksum" even when it didn't fail.
Fixes: 559be30cb7 ('drm/i915: Implement the intel_dp_autotest_edid function for DP EDID complaince tests')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We now prefix our functions/enums/data with the first platform it has
been introduced. Do that for the primary plane formats.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: s/gen2/i8xx/ and s/gen4/i965/ ...]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We advertize C8 in the primary plane formats didn't have the
corresponding code to set PLANE_CTL accordingly.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Let's be consistent with the others skl_plane_ctl_*() functions and use
a MISSING_CASE(). Not only that, but it's a rude to BUG() the whole
machine here.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
No reason to not follow the 80 chars rule, renaming the local variable
makes it easy.
Cc: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We usually use a new line before those kind of return statements. Also
the various skl_plane_ctl*() functions weren't consistent.
Cc: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Improve readability. No functional changes.
v2: use more rational types (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Do not expose invalid gmbus pins as i2c devices to userspace.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Do not expose invalid gmbus pins as i2c devices to userspace.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make input and output of validate_vbt const, and fix the fallout. We
shouldn't modify the VBT, so make the compiler help us here.
v2: use pointer arithmetics on void* to simplify (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make input and output of find_section const, and fix the fallout. We
shouldn't modify the VBT, so make the compiler help us here.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use HOTPLUG_INT_STATUS_G4X instead of HOTPLUG_INT_STATUS_I915 on VLV/CHV
so that we don't confuse the AUX status bits with SDVO status bits.
Avoid pointless log spam as below while handling AUX interrupts:
[drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000
[drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000
[drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000
[drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000
[drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000
[drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064
Note that there's no functional issue, it's just that the sdvo bits
overlap with the dp aux bits. Hence every time we receive an aux
interrupt we also think there's an sdvo hpd interrupt, but due to lack
of any sdvo encoders nothing ever happens because of that.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
[danvet: Add Ville's explanation why nothing functional really
changes.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Remove some inline keywords. One of the functions has clearly outgrown
it anyway, so let's just leave it to the compiler.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The check for start + length >= total_vm_size is
wrong since start + length can be exactly the size of
the vm.
Fix the check to allow allocation to boundary.
Fixes a regression in commit 4dd738e9cd
("drm/i915: Fix 32b overflow check in gen8_ppgtt_alloc_page_directories")
Testcase: igt/gem_evict_everything/swapping-interruptible
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90399
Tested-by: Lu Hua <huax.lu@intel.com>
Cc: Chris Wilson <chris@chris.wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
During check_crtc_state, scaler_id mispatch is being reported for HSW.
This is applicable for skl+ and not for HSW. It is introduced by
commit id:
commit a1b2278e4d
Author: Chandra Konduru <chandra.konduru@intel.com>
Date: Tue Apr 7 15:28:45 2015 -0700
drm/i915: skylake panel fitting using shared scalers
This patch will make sure that we leave scaler_id as 0 for platforms
before skl and set for skl+ only. This way scaler_id check during
check_crtc_state will pass for both prior to skl and skl+ platforms.
v2:
-Leave scaler_id as 0 for gen < 9 (Daniel)
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
References: http://lists.freedesktop.org/archives/intel-gfx/2015-May/065741.html
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As we perform the mmio-flip without any locking and then try to acquire
the struct_mutex prior to dereferencing the request, it is possible for
userspace to queue a new pageflip before the worker can finish clearing
the old state - and then it will clear the new flip request. The result
is that the new flip could be completed before the GPU has finished
rendering.
The bugs stems from removing the seqno checking in
commit 536f5b5e86
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Thu Nov 6 11:03:40 2014 +0200
drm/i915: Make mmio flip wait for seqno in the work function
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Synchronising to an object active on the same ring is a no-op, for the
benefit of execbuffer scheduler. However, for CS flips this means that
we can forgo checking whether the last write request of the object is
actually queued and more importantly whether the cache flush for the
write was emitted.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We no longer interpolate domains in the same manner, and even if we did,
we should trust setting either of the other write domains would trigger
an invalidation rather than force it. Remove the tweaking of the
read_domains since it serves no purpose and use
i915_gem_object_wait_rendering() directly.
Note that this goes back to
commit a8198eea15
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Apr 13 22:04:09 2011 +0100
drm/i915: Introduce i915_gem_object_finish_gpu()
and gpu domain tracking died in
commit cc889e0f6c
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Jun 13 20:45:19 2012 +0200
drm/i915: disable flushing_list/gpu_write_list
which is more than 1 year older.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add notes with information dug out of git history.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If an batch ends while the IRQs are not turned on the notification can
go missing and the GPU can hang. So generate a warning in this case.
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In skylake update plane functions, intel_tile_height() is called with
bits_per_pixel instead of pixel_format. Correcting it.
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
[danvet: Fixup alignment.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
After feedback from the hardware team, now we set the GPU min/idel freq to RPe.
Punit is expecting us to operate GPU between Rpe & Rp0. If we drop the
frequency to RPn, punit is failing to change the vgg input voltage to
minimum :(
Since Punit validates the rps range [RPe, RP0]. This patch
removes unused cherryview_rps_min_freq function.
v2: Change commit message
v3: set min_freq before idle_freq (chris)
v4: Squash 'Remove unused rps min function' patch
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It is observed on BSW that requesting a new frequency from Punit
does nothing when the GPU is in rc6, and if we let GPU enter rc6
with a high frequency, Vnn remains slightly higher than at minimum
frequency. Extending vlv_set_rps_idle() workaround on CHV/BSW.
v2: Update commit msg (Ville)
suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When GPU is idle on VLV, Request freq to punit should be good enough to
get the voltage back to VNN. Also, make sure gfx clock force applies
before requesting the freq fot vlv.
v2: Do forcewake before setting idle frequency (ville)
Update function comments to match the code (Deepak)
v3: Fix get/put across idle frequency Request. (Ville)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75244
suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As we're doing throughout the code, being optimistic that platform n + 1
will mostly reuse the same things as platform n allows us to minimize
the enabling work needed.
This time, it's about the number of WM levels.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With the recent modeset internal rework, we wind up setting crtc_state->enable
to false, but leave crtc_state->active as true following a
drmModeSetCrtc(fb=0), which is incorrect. This mismatch gets caught by
drm_atomic_crtc_check() and causes subsequent atomic operations (such as plane
updates while the CRTC is disabled) to fail.
Bisect points to
commit dad9a7d6d96630182fb52aae7c3856e9e7285e13
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Tue Apr 21 17:13:19 2015 +0300
drm/i915: Use atomic helpers for computing changed flags
as the commit that actually triggers the regression.
The difference compared to (which this patch reverts)
commit 90d469067d
Author: Matt Roper <matthew.d.roper@intel.com>
Date: Thu May 7 14:31:28 2015 -0700
drm/i915: Set crtc_state->active to false when CRTC is disabled (v2)
is that we know keep state->active/enable in sync for all legacy
modeset paths, as it should be.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reported-and-Tested-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[danvet: Directly squash in the revert and augment the commit
message.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Revert "drm/i915: Set crtc_state->active to false when CRTC is disabled (v2)"
This reverts commit 90d469067d.
Skylake nv12 format requires dbuf (aka. ddb) calculations
and programming for each of y and uv sub-planes. Made minor
changes to reuse current dbuf calculations and programming
for uv plane. i.e., with this change, existing computation
is used for either packed format or uv portion of nv12
depending on incoming format. Added new code for dbuf
computation and programming for y plane.
This patch is a pre-requisite for adding NV12 format support.
Actual nv12 support is coming in later patches.
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch fix spelling typo in intel_runtime_pm.c
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVWh3TAAoJEHm+PkMAQRiG/kwH/2c9irodp2+M9OUnX2bfsBb6
LnChiDpvkF5BB8jhP6d/XmvPp4NJzAbTxByhjdfb2E2HkorCUHCOIn2tI1TE2pUs
2qjkOVH+XCzoV0goGtQjzK1ht8f2IrtlDiEjyRekK5cJHzhggb22QPtWL4npyd0O
reDmG2jsRaF9POr9uLSFEv4CEnkksmRLUU0vuQX0TZeCJ41O7TXrkN/wKrLZ5mj4
IWpqXQaSlrffq/T5HnVbXBxk3/T8QmhrIoppiMpV1mUVj0uTqlFRNi5qwT2Nit1h
FVljWI4+WgOk3bf7fUlp+ahopjkTgu+GuXkiRP/pdgWNQO0cxCWSAzSndAlIIAE=
=uOoJ
-----END PGP SIGNATURE-----
Backmerge v4.1-rc4 into into drm-next
We picked up a silent conflict in amdkfd with drm-fixes and drm-next,
backmerge v4.1-rc5 and fix the conflicts
Signed-off-by: Dave Airlie <airlied@redhat.com>
Conflicts:
drivers/gpu/drm/drm_irq.c
- Add the interrupts & events modules, including new IOCTLs to create and wait
on events. The HSA RT open source stack is mainly using events to know when
a dispatched work has been completed. In addition, this module is
a pre-requisite for the next module I'm going to upstream - debugger support
This module also handles H/W exceptions, such as memory exception received
through the IOMMUv2 H/W and Bad Opcode exception receieved from the GPU.
- Adding a new kernel module parameter to let the user decide whether he wants
to receive a SIGTERM when a memory exception occurs inside the GPU kernel and
the HSA application doesn't wait on an appropriate event, or if he just want
to receive notification about this event in dmesg. The default is the latter.
- Additional improvements for SDMA code
- Update my email address in Maintainers file.
* tag 'drm-amdkfd-next-2015-05-19' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: change driver version to 0.7.2
drm/amdkfd: Implement events IOCTLs
drm/amdkfd: Add module parameter of send_sigterm
drm/amdkfd: Add bad opcode exception handling
drm/amdkfd: Add memory exception handling
drm/amdkfd: Add the events module
drm/amdkfd: add events IOCTL set definitions
drm/amdkfd: Add interrupt handling module
drm/radeon: Add init interrupt kfd->kgd interface
MAINTAINERS: update amdkfd Oded's email address
drm/amdkfd: make the sdma vm init to be asic specific
drm/amdkfd: Use new struct for asic specific ops
drm/amdkfd: reformat some debug prints
drm/amdkfd: Remove unessary void pointer cast
Scattering of random drm core patches. Bunch of atomic prep work too, but
the final bits for blob properties, atomic modesets and lifting the
experimental tag on the atomic ioctl are still blocked on Daniel Stone
finalizing and testing the weston support for it. I hope that we can get
it all ready for 4.2 though.
* tag 'topic/drm-misc-2015-05-19' of git://anongit.freedesktop.org/drm-intel: (22 commits)
drm/atomic: Allow drivers to subclass drm_atomic_state, v3
drm/atomic: remove duplicated assignment of old_plane_state
drm/dp: Fix comment in DP helper
drm/atomic: add drm_atomic_get_existing_*_state helpers
drm/core: get rid of -Iinclude/drm
drm/i915: get rid of -Iinclude/drm
drm/atomic-helpers: Export drm_atomic_helper_update_legacy_modeset_state
drm/atomic-helpers: Update vblank timestamping constants
drm/sysfs: remove unnecessary connector type checks
drm/sysfs: split DVI-I and TV-out attributes
drm/sysfs: make optional attribute groups per connector type
drm/sysfs: add a helper for extracting connector type from kobject
drm/edid: Add CEA modes before inferred modes
drm/prime: Allow internal imports without import_sg_table
drm: Add reference counting to blob properties
drm: Introduce blob_lock
drm: Introduce helper for replacing blob properties
drm: Don't leak path blob property when updating
drm/atomic: Don't open-code CRTC state destroy
drm/edid: Add DMT modes with ID > 0x50
...
Don't pollute the dmesg with EDID read success message as an error.
Printing as debug should be fine.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The index for the hardware layer is always >=0. Previous
code that also used -1 as special index is now gone.
Also apply this to 'ch_enabled' (decon/fimd), since the
variable is on the same line (and is again always unsigned).
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Simplify the code and remove superfluous return statement. Just return
the result of fimd_iommu_attach_devices().
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The Exynos DRM code does not modify the ops provided by CRTC driver in
exynos_drm_crtc_create() call.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Disabling the CONFIG_DRM_EXYNOS_FIMD (e.g. by enabling of CONFIG_FB_S3C)
leads to build error:
drivers/built-in.o: In function `exynos_dp_dpms':
binder.c:(.text+0xd6a840): undefined reference to `fimd_dp_clock_enable'
binder.c:(.text+0xd6ab54): undefined reference to `fimd_dp_clock_enable'
Fix this by changing direct call to fimd_dp_clock_enable() into optional
call to exynos_drm_crtc_ops->clock_enable(). Only the DRM_EXYNOS_FIMD
implements this op.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The platform_device_id is not modified by the driver and core uses it as
const.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Move the defines for the pixelformats that the mixer supports out
of mixer_graph_buffer() to the top of the source.
Then select the mixer pixelformat (pf) in mixer_graph_buffer() based on
the plane's pf (and not bpp).
Also add handling of RGB565 and XRGB1555 to the switch statement and
exit early if the plane has an unsupported pf.
Partially based on 'drm/exynos: enable/disable blend based on pixel
format' by Gustavo Padovan <gustavo.padovan@collabora.co.uk>.
v2: Use the shorter MXR_FORMAT as prefix.
v3: Re-add ARGB8888 because of compatibility reasons
(suggested by Joonyoung Shim).
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
All the necessary code is already there, just need to
handle the format in the switch statement.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The video processor (VP) supports four formats: NV12, NV21 and its
tiled variants. All these formats are bi-planar, so the buffer
count in vp_video_buffer() is always 2.
Also properly exit if we're called with an invalid (non-VP) pixelformat.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Previously we were ignoring the buffer offsets that are
passed through the addfb2 ioctl. This didn't cause any
major issues, since for uni-planar formats (like XRGB8888)
userspace would most of the time just use offsets[0]=0.
However with NV12 offsets[1] is very likely non-zero.
So properly apply the offsets to our dma addresses.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The previous code had some special case handling for the buffer
count in exynos_drm_format_num_buffers().
This code was incorrect though, since this special case doesn't
exist for DRM. It stemmed from the existence of the special NV12M
V4L2 format. NV12 is a bi-planar format (separate planes for luma
and chroma) and V4L2 differentiates between a NV12 buffer where
luma and chroma is contiguous in memory (so no data between
luma/chroma), and a NV12 buffer where luma and chroma have two
explicit memory locations (which is then called NV12M).
This distinction doesn't exist for DRM. A bi-planar format always
explicitly comes with the information about its two planes (even
if these planes should be contiguous).
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch adds a new kernel module parameter to amdkfd,
called send_sigterm.
This parameter specifies whether amdkfd should send the
SIGTERM signal to an HSA process, when the following conditions
occur:
1. The GPU triggers an exception regarding a kernel that was
issued by this process.
2. The HSA process isn't waiting on an event that handles
this exception.
The default behavior is not to send a SIGTERM and suffice
with a dmesg error print.
Reviewed-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds Peripheral Page Request (PPR) failure processing
and reporting.
Bad address or pointer to a system memory block with inappropriate
read/write permission cause such PPR failure during a user queue
processing. PPR request handling is done by IOMMU driver notifying
AMDKFD module on PPR failure.
The process triggering a PPR failure will be notified by
appropriate event or SIGTERM signal will be sent to it.
v3:
- Change all bool fields in struct kfd_memory_exception_failure to
uint32_t
Signed-off-by: Alexey Skidanov <alexey.skidanov@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds the events module (kfd_events.c) and the interrupt
handle module for Kaveri (cik_event_interrupt.c).
The patch updates the interrupt_is_wanted(), so that it now calls the
interrupt isr function specific for the device that received the
interrupt. That function(implemented in cik_event_interrupt.c)
returns whether this interrupt is of interest to us or not.
The patch also updates the interrupt_wq(), so that it now calls the
device's specific wq function, which checks the interrupt source
and tries to signal relevant events.
v2:
Increase limit of signal events to 4096 per process
Remove bitfields from struct cik_ih_ring_entry
Rename radeon_kfd_event_mmap to kfd_event_mmap
Add debug prints to allocate_free_slot and allocate_signal_page
Make allocate_event_notification_slot return a correct value
Add warning prints to create_signal_event
Remove error print from IOCTL path
Reformatted debug prints in kfd_event_mmap
Map correct size (as received from mmap) in kfd_event_mmap
v3:
Reduce limit of signal events back to 256 per process
Fix allocation of kernel memory for signal events
Signed-off-by: Andrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
- AMDKFD_IOC_CREATE_EVENT:
Creates a new event of a specified type
- AMDKFD_IOC_DESTROY_EVENT:
Destroys an existing event
- AMDKFD_IOC_SET_EVENT:
Signal an existing event
- AMDKFD_IOC_RESET_EVENT:
Reset an existing event
- AMDKFD_IOC_WAIT_EVENTS:
Wait on event(s) until they are signaled
v2:
- Move the limit of the signal events to kfd_ioctl.h so it
can be used by userspace
v3:
- Change all bool fields in struct kfd_memory_exception_failure
to uint32_t
Signed-off-by: Andrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds the interrupt handling module, kfd_interrupt.c, and its
related members in different data structures to the amdkfd driver.
The amdkfd interrupt module maintains an internal interrupt ring
per amdkfd device. The internal interrupt ring contains interrupts
that needs further handling. The extra handling is deferred to
a later time through a workqueue.
There's no acknowledgment for the interrupts we use. The hardware
simply queues a new interrupt each time without waiting.
The fixed-size internal queue means that it's possible for us to lose
interrupts because we have no back-pressure to the hardware.
However, only interrupts that are "wanted" by amdkfd, are copied into
the amdkfd s/w interrupt ring, in order to minimize the chances
for overflow of the ring.
Signed-off-by: Andrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds a new interface function to the kfd->kgd interface.
The function is kgd_init_interrupts() and its function is to
initialize a pipe's interrupts.
The function currently enables the timestamp interrupt and the
bad opcode interrupt.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch creates a new structure for asic specific operations, instead
of using the existing structure of operations.
This is done to make the code flow more logic, readable and maintainable.
The change is done only to the device queue manager module at this point.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
kmalloc() returns a void pointer - no need to cast it in
drivers/gpu/drm/amd/amdkfd/kfd_process.c::kfd_process_destroy_delayed()
Signed-off-by: Firo Yang <firogm@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Commit c9f038a1a5 ("drm/i915: Don't assume primary & cursor are
always on for wm calculation (v4)") fixes a null pointer dereference.
Setting the primary and cursor panes to false in
ilk_compute_wm_parameters to false does however give the following
errors in the kernel log and causes the screen to flicker.
[ 101.133716] [drm:intel_set_cpu_fifo_underrun_reporting [i915]]
*ERROR* uncleared fifo underrun on pipe A
[ 101.133725] [drm:intel_cpu_fifo_underrun_irq_handler [i915]]
*ERROR* CPU pipe A FIFO underrun
Always setting the panes to enabled fixes this error.
Helped-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
- skl plane scaler support (Chandra Kondru)
- enable hsw cmd parser (Daniel and fix from Rebecca Palmer)
- skl dc5/6 support (low power display modes) from Suketu&Sunil
- dp compliance testing patches (Todd Previte)
- dp link training optimization (Mika Kahola)
- fixes to make skl resume work (Damien)
- rework modeset code to fully use atomic state objects (Ander&Maarten)
- pile of bxt w/a patchs from Nick Hoath
- (linear) partial gtt mmap support (Joonas Lahtinen)
* tag 'drm-intel-next-2015-05-08' of git://anongit.freedesktop.org/drm-intel: (103 commits)
drm/i915: Update DRIVER_DATE to 20150508
drm/i915: Only wait for required lanes in vlv_wait_port_ready()
drm/i915: Fix possible security hole in command parsing
drm/edid: Kerneldoc for newly added edid_corrupt
drm/i915: Reject huge tiled objects
Revert "drm/i915: Hack to tie both common lanes together on chv"
drm/i915: Work around DISPLAY_PHY_CONTROL register corruption on CHV
drm/i915: Implement chv display PHY lane stagger setup
drm/i915/vlv: remove wait for previous GFX clk disable request
drm/i915: Set crtc_state->active to false when CRTC is disabled (v2)
drm/i915/skl: Re-indent part of skl_ddi_calculate_wrpll()
drm/i915: Use partial view in mmap fault handler
drm/i915: Add a partial GGTT view type
drm/i915: Consider object pinned if any VMA is pinned
drm/i915: Do not make assumptions on GGTT VMA sizes
drm/i915/bxt: Mark WaCcsTlbPrefetchDisable as for Broxton also.
drm/i915/bxt: Mark WaDisablePartialResolveInVc as for Broxton also.
drm/i915/bxt: Mark Wa4x4STCOptimizationDisable as for Broxton also.
drm/i915/bxt: Move WaForceEnableNonCoherent to Skylake only
drm/i915/bxt: Enable WaEnableYV12BugFixInHalfSliceChicken7 for Broxton
...
msm fixes, pretty scattered.
* 'msm-fixes-4.1' of git://people.freedesktop.org/~robclark/linux:
drm/msm: fix locking inconsistencies in gpu->destroy()
drm/msm/dsi: Simplify the code to get the number of read byte
drm/msm: Attach assigned encoder to eDP and DSI connectors
drm/msm: setup vram after component_bind_all()
drm/msm/dsi: use pr_err_ratelimited
drm/msm: fix unbalanced DRM framebuffer init/destroy
drm/msm/mdp5: Fix iteration on INTF config array
drm/msm/dsi: Fixup missing *break* statement during cmd rx
drm/msm/dp: fix error return code
drm: msm: Fix build when legacy fbdev support isn't set
drm/msm/dsi: Fix a couple more 64-bit build warnings
drm/msm: Fix a couple of 64-bit build warnings
Drivers may need to store the state of shared resources, such as PLLs
or FIFO space, into the atomic state. Allow this by making it possible
to subclass drm_atomic_state.
Changes since v1:
- Change member names for functions to atomic_state_(alloc,clear)
- Change __drm_atomic_state_new to drm_atomic_state_init
- Allow free function to be overridden too, in case extra memory is
allocated in alloc.
Changes since v2:
- Rename *_default_free to default_release, to make clear it doesn't
free the state object itself.
Cc: dri-devel@lists.freedesktop.org
Acked-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
old_plane_state is already assigned to old_state->plane_states[i] inside
for_each_plane_in_state(). Here we remove an the extra assignment.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In error paths, this was being called without struct_mutex held.
Leading to panics like:
msm 1a00000.qcom,mdss_mdp: No memory protection without IOMMU
Kernel panic - not syncing: BUG!
CPU: 0 PID: 1409 Comm: cat Not tainted 4.0.0-dirty #4
Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
Call trace:
[<ffffffc000089c78>] dump_backtrace+0x0/0x118
[<ffffffc000089da0>] show_stack+0x10/0x20
[<ffffffc0006686d4>] dump_stack+0x84/0xc4
[<ffffffc0006678b4>] panic+0xd0/0x210
[<ffffffc0003e1ce4>] drm_gem_object_free+0x5c/0x60
[<ffffffc000402870>] adreno_gpu_cleanup+0x60/0x80
[<ffffffc0004035a0>] a3xx_destroy+0x20/0x70
[<ffffffc0004036f4>] a3xx_gpu_init+0x84/0x108
[<ffffffc0004018b8>] adreno_load_gpu+0x58/0x190
[<ffffffc000419dac>] msm_open+0x74/0x88
[<ffffffc0003e0a48>] drm_open+0x168/0x400
[<ffffffc0003e7210>] drm_stub_open+0xa8/0x118
[<ffffffc0001a0e84>] chrdev_open+0x94/0x198
[<ffffffc000199f88>] do_dentry_open+0x208/0x310
[<ffffffc00019a4c4>] vfs_open+0x44/0x50
[<ffffffc0001aa26c>] do_last.isra.14+0x2c4/0xc10
[<ffffffc0001aac38>] path_openat+0x80/0x5e8
[<ffffffc0001ac354>] do_filp_open+0x2c/0x98
[<ffffffc00019b60c>] do_sys_open+0x13c/0x228
[<ffffffc00019b72c>] SyS_openat+0xc/0x18
CPU1: stopping
But there isn't any particularly good reason to hold struct_mutex for
teardown, so just standardize on calling it without the mutex held and
use the _unlocked() versions for GEM obj unref'ing
Signed-off-by: Rob Clark <robdclark@gmail.com>
some minor cleanups
* 'drm-armada-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm/armada: armada_drv: Remove unused function
drm/armada: armada_output: Remove some unused functions
tda998x: use helpers for infoframe.
* 'drm-tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm/i2c: tda998x: use drm_hdmi_avi_infoframe_from_display_mode()
fix one gpu hang on resume.
* tag 'drm-intel-fixes-2015-05-13' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Avoid GPU hang when coming out of s3 or s4
During cmd rx, only new versions of H/W provide register to read back
the real number of byte returned by panel. For the old versions, reading
this register will not get the right number. In fact, we only need to
assume the returned data is the same size as we expected, because later
we will check the data type to detect error.
Signed-off-by: Hai Li <hali@codeaurora.org>
drm_mode_connector_attach_encoder() function call is missing
during eDP and DSI connector initialization. As a result,
no encoder is returned by DRM_IOCTL_MODE_GETCONNECTOR system
call. This change is to fix this issue.
Signed-off-by: Hai Li <hali@codeaurora.org>
First of all, we don't want -EPROBE_DEFER when trying to bind children
to cause us to forget to free our vram. And second we don't want vram
allocation fail to trigger _unbind_all() before _bind_all().
Signed-off-by: Rob Clark <robdclark@gmail.com>
When msm_framebuffer_init() fails before calling drm_framebuffer_init(),
drm_framebuffer_cleanup() [called in msm_framebuffer_destroy()]
is still being called even though drm_framebuffer_init() was not
called for that buffer. Thus a NULL pointer derefencing:
[ 247.529691] Unable to handle kernel NULL pointer dereference at virtual address 0000027c
...
[ 247.563996] PC is at __mutex_lock_slowpath+0x94/0x3a8
...
[ 247.823025] [<c07c3c78>] (__mutex_lock_slowpath) from [<c07c3fac>] (mutex_lock+0x20/0x3c)
[ 247.831186] [<c07c3fac>] (mutex_lock) from [<c0347cf0>] (drm_framebuffer_cleanup+0x18/0x38)
[ 247.839520] [<c0347cf0>] (drm_framebuffer_cleanup) from [<c036d138>] (msm_framebuffer_destroy+0x48/0x100)
[ 247.849066] [<c036d138>] (msm_framebuffer_destroy) from [<c036d580>] (msm_framebuffer_init+0x1e8/0x228)
[ 247.858439] [<c036d580>] (msm_framebuffer_init) from [<c036d630>] (msm_framebuffer_create+0x70/0x134)
[ 247.867642] [<c036d630>] (msm_framebuffer_create) from [<c03493ec>] (internal_framebuffer_create+0x67c/0x7b4)
[ 247.877537] [<c03493ec>] (internal_framebuffer_create) from [<c034ce34>] (drm_mode_addfb2+0x20/0x98)
[ 247.886650] [<c034ce34>] (drm_mode_addfb2) from [<c034071c>] (drm_ioctl+0x240/0x420)
[ 247.894378] [<c034071c>] (drm_ioctl) from [<c011df7c>] (do_vfs_ioctl+0x4e4/0x5a4)
...
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
[plus initialize msm_fb to NULL to -Rob]
Signed-off-by: Rob Clark <robdclark@gmail.com>
This causes an oops as we haven't initialised the mst
layer.
Reported-by: Dave Jones <<davej@codemonkey.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current iteration in get_dsi_id_from_intf() is wrong:
instead of iterating until hw_cfg->intf.count, we need to iterate
until MDP5_INTF_NUM_MAX here.
Let's take the example of msm8x16:
hw_cfg->intf.count = 1
intfs[0] = INTF_Disabled
intfs[1] = INTF_DSI
If we stop iterating once i reaches hw_cfg->intf.count (== 1),
we will miss the test for intfs[1].
Actually, this hw_cfg->intf.count entry is quite confusing and is not
(or *should not be*) used anywhere else; let's remove it.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Return a negative error code on failure.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret = 0
)
... when != ret = e1
when != &ret
*if(...)
{
... when != ret = e2
when forall
return ret;
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
The DRM_KMS_FB_HELPER config is selected only when DRM_MSM_FBDEV config is
selected. The driver accesses drm_fb_helper_* functions even when legacy fbdev
support is disabled in msm. Wrap around these functions with #ifdef checks to
prevent build break.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Avoid such errors at compilation time:
format '%d' expects argument of type 'int', but argument 3 has type 'size_t'
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Avoid casts from pointers to fixed-size integers to prevent the compiler
from warning. Print virtual memory addresses using %p instead. Also turn
a couple of %d/%x specifiers into %zu/%zd/%zx to avoid further warnings
due to mismatched format strings.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
There are cases where we want to test if a given object is
part of the state, but don't want to add them if they're not.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This results in a warning when building out of tree:
"cc1: warning: include/drm: No such file or directory [enabled by default]"
Most code already uses #include <drm/foo.h> correctly, so fix the
instances that don't.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This results in a warning when building out of tree:
"cc1: warning: include/drm: No such file or directory [enabled by default]"
Most code already uses #include <drm/foo.h> correctly, so fix the
instances that don't.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is useful for drivers which have their own modeset infrastructure
but want to reuse most of the legacy state frobbery from the helpers.
i915 wants this.
v2: Add header declaration.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The atomic helpers don't call drm_calc_timestamping_constants, which
is a regression compared to the crtc helpers. Fix this.
Noticed while reviewing i915 atomic patches from Maarten.
v2: Also check state->enable to avoid a warning in dmesg. Reported by
Maarten.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
These attributes should be exposed for the matching connector types
only, so checking is redundant.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The show methods for the attributes of DVI-I and TV-out types have a
bunch of code to deal with the differences between the two. Just split
the attributes into connector type specific ones. No functional changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Split DVI-I and TV-out (which remains a group of types). As an
intermediate step, still share the attributes themselves between the
two. No user visible changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This reduces duplication in the patches to follow. No functional
changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently we're adding CEA modes after the inferred modes, which means
we might get multiple modes that are very close to each other, but
slightly different, which seems a bit silly. That's because duplicate
mode check that occurs when adding inferred modes would not consider
CEA modes as potential duplicates. Reverse the order so that CEA
modes get added before inferred modes, and are thus considered potential
duplicates.
Or as ajax put it on irc:
"< ajax> the point of the "pick a timing formula" heuristic was to
generate something the sink could _likely_ sink. if it tells us
timings it can sink explicitly then second-guessing seems dumb."
Cc: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The mapping range is inclusive between starting and ending addresses.
Signed-off-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently drm_gem_prime_import() checks if gem_prime_import_sg_table()
is implemented in DRM driver ops. However it is not necessary for
internal imports (i.e. dma_buf->ops == &drm_gem_prime_dmabuf_ops
and obj->dev == dev), which only increment reference count on respective
GEM objects.
This patch makes the helper check this condition only in case of
external imports fo rwhich importing sg table is indeed needed.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reference-count drm_property_blob objects, changing the API to
ref/unref.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[danvet: Squash in kerneldoc fixup from Daniel Stone.]
[danvet: Squash in Oops fix from Thiery Reding.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch fixes a timing issue that causes a GPU hang when the system
comes out of power saving.
During pm_resume, We are submitting batchbuffers before enabling
Interrupts this is causing us to miss the context switch interrupt,
and in consequence intel_execlists_handle_ctx_events is not triggered.
This patch is based on a patch from Deepak S <deepak.s@intel.com>
from another platform.
The patch fixes an issue introduced by:
commit e7778be1ea
drm/i915: Fix startup failure in LRC mode after recent init changes
The above patch added a call to init_context() to fix an issue introduced
by a previous patch. But, it then opened up a small timing window for the
batches being added by the init_context (basically setting up the context)
to complete before the interrupts have been turned on, thus hanging the
GPU.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89600
Cc: stable@vger.kernel.org # 4.0+
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[Jani: fixed typo in subject, massaged the comments a bit]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Looks like it was introduced in:
commit 650ad970a3
Author: Imre Deak <imre.deak@intel.com>
Date: Fri Apr 18 16:35:02 2014 +0300
drm/i915: vlv: factor out vlv_force_gfx_clock and check for pending force-of
but I'm not sure why. It has caused problems for us in the past (see
85250ddff7 "drm/i915/chv: Remove Wait for a previous gfx force-off"
and 8d4eee9cd7 "drm/i915: vlv: increase timeout when forcing on the
GFX clock") and doesn't seem to be required, so let's just drop it.
[airlied: I messed up a merge - readd this]
References: https://bugs.freedesktop.org/show_bug.cgi?id=89611
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Darren Hart <dvhart@linux.intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com>
Cc: stable@vger.kernel.org # c9c52e24194a: drm/i915/chv: Remove Wait ...
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
misc i915 fixes.
* tag 'drm-intel-fixes-2015-05-08' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Drop PIPE-A quirk for 945GSE HP Mini
drm/i915: Sink rate read should be saved in deca-kHz
drm/i915/dp: there is no audio on port A
drm/i915: Add missing MacBook Pro models with dual channel LVDS
drm/i915: Assume dual channel LVDS if pixel clock necessitates it
Since commit 844b03f277 we make
sure that after vblank irq off, we return the last valid
(vblank count, vblank timestamp) pair to clients, e.g., during
modesets, which is good.
An overlooked side effect of that commit for kms drivers without
support for precise vblank timestamping is that at vblank irq
enable, when we update the vblank counter from the hw counter, we
can't update the corresponding vblank timestamp, so now we have a
totally mismatched timestamp for the new count to confuse clients.
Restore old client visible behaviour from before Linux 3.17, but
zero out the timestamp at vblank counter update (instead of disable
as in original implementation) if we can't generate a meaningful
timestamp immediately for the new vblank counter. This will fix
this regression, so callers know they need to retry again later
if they need a valid timestamp, but at the same time preserves
the improvements made in the commit mentioned above.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: <stable@vger.kernel.org> #v3.17+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Currently vlv_wait_port_ready() waits for all four lanes on the
appropriate channel. This no longer works on CHV when the unused
lanes may be power gated. So pass in a mask of lanes that the
caller is expecting to be ready.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak S<deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
i915_parse_cmds returns -EACCES on chained batches, which "tells the
caller to abort and dispatch the workload as a non-secure batch",
but the mechanism implementing that was broken when
flags |= I915_DISPATCH_SECURE was moved from i915_gem_execbuffer_parse
to i915_gem_do_execbuffer (17cabf571e):
i915_gem_execbuffer_parse returns the original batch_obj in this case,
and i915_gem_do_execbuffer doesn't check for that.
Don't set the secure bit in this case to make sure such batches don't
run with elevated priviledges.
Signed-off-by: Rebecca Palmer <rebecca_palmer@zoho.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
[danvet: Stitch together commit message. Also remove a comment as
suggested by Mika. And style-align the comment while at it.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Also treat it as a proper boolean.
Cc: Todd Previte <tprevite@gmail.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
We do not yet support tiled objects bigger than the mappable
aperture size so reject them.
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
[danvet: Rework the check a bit to avoid warnings.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With recent hardware/firmware there don't appear to be any glitches
on the other PHY when we toggle the cmnreset for the other PHY. So
detangle the cmnlane power wells from one another and let them be
controlled independently.
This reverts commit 3dd7b97458.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sometimes (exactly when is a bit unclear) DISPLAY_PHY_CONTROL appears to
get corrupted. The values I've managed to read from it seem to have some
pattern but vary quite a lot. The corruption doesn't seem to just happen
when the register is accessed, but can also happen spontaneosly during
modeset. When this happens during a modeset things go south and the
display doesn't light up.
I've managed to hit the problemn when toggling HDMI on port D on and
off. When things get corrupted the display doesn't light up, but as soon
as I manually write the correct value to the register the display comes
up.
First I was suspicious that we ourselves accidentally overwrite it with
garbage, but didn't catch anything with the reg_rw tracepoint. Also I
sprinkled check all over the modeset path to see exactly when the
corruption happens, and eg. the read back value was fine just before
intel_dp_set_m(), and corrupted immediately after it. I also made my
check function repair the register value whenever it was wrong, and with
this approach the corruption repeated several times during the modeset
operation, always seeming to trigger in the same exact calls to the
check function, while other calls to the function never caught anything.
So far I've not seen this problem occurring when carefully avoiding all
read accesses to DISPLAY_PHY_CONTROL. Not sure if that's just pure luck
or an actual workaround, but we can hope it works. So let's avoid reading
the register and instead track the desired value of the register in dev_priv.
v2: Read out the power well state to determine initial register value
v3: Use DPIO_CHx names instead of raw numbers
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Set up the chv display PHY lane stagger registers according to
"Programming Guide for 1273 CHV eDP/DP/HDMI Display PHY" v1.04
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Create a new global blob_lock mutex, which protects the blob property
list from insertion and/or deletion.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Introduce a common helper for the pattern of:
- allocate new blob property
- potentially free old blob property
- replace content of indicative property with new blob ID
- change member pointer on modeset object
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[danvet: Squash in fixup from Daniel for the kerneldoc, reported by
0day builder.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Looks like it was introduced in:
commit 650ad970a3
Author: Imre Deak <imre.deak@intel.com>
Date: Fri Apr 18 16:35:02 2014 +0300
drm/i915: vlv: factor out vlv_force_gfx_clock and check for pending force-of
but I'm not sure why. It has caused problems for us in the past (see
85250ddff7 "drm/i915/chv: Remove Wait for a previous gfx force-off"
and 8d4eee9cd7 "drm/i915: vlv: increase timeout when forcing on the
GFX clock") and doesn't seem to be required, so let's just drop it.
References: https://bugs.freedesktop.org/show_bug.cgi?id=89611
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Darren Hart <dvhart@linux.intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com>
Cc: stable@vger.kernel.org # c9c52e24194a: drm/i915/chv: Remove Wait ...
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
[danvet: Repick this commit from
5df0582bf0 becuase Dave Airlie lost it
in his merge commit e1dee1973c74a0408b108d88c57a15be8a2d6d84.]
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
With the recent modeset internal rework, we wind up setting
crtc_state->enable to false, but leave crtc_state->active as true, which
is incorrect. This mismatch gets caught by drm_atomic_crtc_check() and
causes subsequent atomic operations (such as plane updates while the
CRTC is disabled) to fail.
Bisect points to
commit dad9a7d6d96630182fb52aae7c3856e9e7285e13
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Tue Apr 21 17:13:19 2015 +0300
drm/i915: Use atomic helpers for computing changed flags
as the commit that actually triggers the regression.
v2: Update to alter in-flight state rather than already-committed state
(first version was accidentally based on a midpoint of Ander's
modeset rework series, before his final patches that add proper
state swapping to the legacy modeset path).
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Testcase: igt/kms_universal_plane
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A part of this function was indented with 2 tabs and 1 space instead of
just 2 tabs. We're going to touch that code, so start by re-indenting
it.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use partial view for huge BOs (bigger than half the mappable aperture)
in fault handler so that they can be accessed withough trying to make
room for them by evicting other objects.
v2:
- Only use partial views in the case where early rejection was
previously done.
- Account variable type changes from previous reroll.
v3:
- Add a comment about overwriting existing page entries.
(Tvrtko Ursulin)
- Whitespace fixes.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Partial view type allows manipulating parts of huge BOs through the GGTT,
which was not previously possible due to constraint that whole object had
to be mapped for any access to it through GGTT.
v2:
- Retain error value from sg_alloc_table (Tvrtko Ursulin)
- Do not zero already zeroed variable (Tvrtko Ursulin)
- Use more common variable types for page size/offset (Tvrtko Ursulin)
v3:
- Only compare additional view parameters when need to (Tvrtko Ursulin)
v4:
- Do zero out the variable that needs to be (bug introduced in v2).
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Do not skip special GGTT views when considering whether an object
is pinned or not.
Wrong behaviour was introduced in;
commit ec7adb6ee7
Author: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Date: Mon Mar 16 14:11:13 2015 +0200
drm/i915: Do not use ggtt_view with (aliasing) PPGTT
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
GGTT VMA sizes might be smaller than the whole object size due to
different GGTT views.
v2:
- Separate GGTT view constraint calculations from normal view
constraint calculations (Chris Wilson)
v3:
- Do not bother with debug wording. (Tvrtko Ursulin)
v4:
- Clearer logic for calculating map_and_fenceable (Tvrtko Ursulin)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
[danvet: Drop BUG_ON, it's redudant.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä