Only when vblanks are supported ofc.
Some drivers do this already, but most unfortunately missed it. This
opens up bugs after driver load, before the crtc is enabled for the
first time. syzbot spotted this when loading vkms as a secondary
output. Given how many drivers are buggy it's best to solve this once
and for all in shared helper code.
Aside from moving the few existing calls to drm_crtc_vblank_reset into
helpers (i915 doesn't use helpers, so keeps its own) I think the
regression risk is minimal: atomic helpers already rely on drivers
calling drm_crtc_vblank_on/off correctly in their hooks when they
support vblanks. And driver that's failing to handle vblanks after
this is missing those calls already, and vblanks could only work by
accident when enabling a CRTC for the first time right after boot.
Big thanks to Tetsuo for helping track down what's going wrong here.
There's only a few drivers which already had the necessary call and
needed some updating:
- komeda, atmel and tidss also needed to be changed to call
__drm_atomic_helper_crtc_reset() intead of open coding it
- tegra and msm even had it in the same place already, just code
motion, and malidp already uses __drm_atomic_helper_crtc_reset().
- Laurent noticed that rcar-du and omap open-code their crtc reset and
hence would actually be broken by this patch now. So fix them up by
reusing the helpers, which brings the drm_crtc_vblank_reset() back.
Only call left is in i915, which doesn't use drm_mode_config_reset,
but has its own fastboot infrastructure. So that's the only case where
we actually want this in the driver still.
I've also reviewed all other drivers which set up vblank support with
drm_vblank_init. After the previous patch fixing mxsfb all atomic
drivers do call drm_crtc_vblank_on/off as they should, the remaining
drivers are either legacy kms or legacy dri1 drivers, so not affected
by this change to atomic helpers.
v2: Use the drm_dev_has_vblank() helper.
v3: Laurent pointed out that omap and rcar-du used drm_crtc_vblank_off
instead of drm_crtc_vblank_reset. Adjust them too.
v4: Laurent noticed that rcar-du and omap open-code their crtc reset
and hence would actually be broken by this patch now. So fix them up
by reusing the helpers, which brings the drm_crtc_vblank_reset() back.
v5: also mention rcar-du and ompadrm in the proper commit message
above (Laurent).
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://syzkaller.appspot.com/bug?id=0ba17d70d062b2595e1f061231474800f076c7cb
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot+0871b14ca2e2fb64f6e3@syzkaller.appspotmail.com
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: "James (Qian) Wang" <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mihail Atanassov <mihail.atanassov@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: zhengbin <zhengbin13@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-tegra@vger.kernel.org
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612160056.2082681-1-daniel.vetter@ffwll.ch
UAPI Changes:
- Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline.
Cross-subsystem Changes:
- Assorted devicetree binding updates.
- Add might_sleep() to dma_fence_wait().
- Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages.
- Small cleanup with IS_BUILTIN in video/fbdev drivers.
- Fix video/hdmi coding style for infoframe size.
Core Changes:
- Silence vblank output during init.
- Fix DP-MST corruption during send msg timeout.
- Clear leak in drm_gem_objecs_lookup().
- Make newlines work with force connector attribute.
- Fix module refcounting error in drm_encoder_slave, and use new i2c api.
- Header fix for drm_managed.c
- More struct_mutex removal for !legacy drivers:
- Remove gem_free_object()
- Removal of drm_gem_object_put_unlocked().
- Show current->comm alongside pid in debug printfs.
- Add drm_client_modeset_check() + drm_client_framebuffer_flush().
- Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits.
- Remove mode->vrefresh, and compactify drm_display_mode.
- Use drm_* macros for logging and warnings.
- Add WARN when drm_gem_get_pages is used on a private obj.
- Handle importing and imported dmabuf better in shmem helpers.
- Small fix for drm/mm hole size comparison, and remove invalid entry optimization.
- Add a drm/mm selftest.
- Set DSI connector type for DSI panels.
- Assorted small fixes and documentation updates.
- Fix DDI I2C device registration for MST ports, and flushing on destroy.
- Fix master_set return type, used by vmwgfx.
- Make the drm_set/drop_master ioctl symmetrical.
Driver Changes:
Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4 (multiple), i915.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE TX26D202VM0BWA panel.
- Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte.
- Remove gem_print_info.
- Improve gem_create_object_helper so udl can use shmem helpers.
- Convert vc4 dt bindings to schemas, and add clock properties.
- Device initialization cleanups for mgag200.
- Add a workaround to fix DP-MST short pulses handling on broken hardware in i915.
- Allow build test compiling arm drivers.
- Use managed pci functions in mgag200 and ast.
- Use dev_groups in malidp.
- Add per pixel alpha support for PX30 VOP in rockchip.
- Silence deferred probe logs in panfrost.
-----BEGIN PGP SIGNATURE-----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=ZmKI
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-06-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.9:
UAPI Changes:
- Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline.
Cross-subsystem Changes:
- Assorted devicetree binding updates.
- Add might_sleep() to dma_fence_wait().
- Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages.
- Small cleanup with IS_BUILTIN in video/fbdev drivers.
- Fix video/hdmi coding style for infoframe size.
Core Changes:
- Silence vblank output during init.
- Fix DP-MST corruption during send msg timeout.
- Clear leak in drm_gem_objecs_lookup().
- Make newlines work with force connector attribute.
- Fix module refcounting error in drm_encoder_slave, and use new i2c api.
- Header fix for drm_managed.c
- More struct_mutex removal for !legacy drivers:
- Remove gem_free_object()
- Removal of drm_gem_object_put_unlocked().
- Show current->comm alongside pid in debug printfs.
- Add drm_client_modeset_check() + drm_client_framebuffer_flush().
- Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits.
- Remove mode->vrefresh, and compactify drm_display_mode.
- Use drm_* macros for logging and warnings.
- Add WARN when drm_gem_get_pages is used on a private obj.
- Handle importing and imported dmabuf better in shmem helpers.
- Small fix for drm/mm hole size comparison, and remove invalid entry optimization.
- Add a drm/mm selftest.
- Set DSI connector type for DSI panels.
- Assorted small fixes and documentation updates.
- Fix DDI I2C device registration for MST ports, and flushing on destroy.
- Fix master_set return type, used by vmwgfx.
- Make the drm_set/drop_master ioctl symmetrical.
Driver Changes:
Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4 (multiple), i915.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE TX26D202VM0BWA panel.
- Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte.
- Remove gem_print_info.
- Improve gem_create_object_helper so udl can use shmem helpers.
- Convert vc4 dt bindings to schemas, and add clock properties.
- Device initialization cleanups for mgag200.
- Add a workaround to fix DP-MST short pulses handling on broken hardware in i915.
- Allow build test compiling arm drivers.
- Use managed pci functions in mgag200 and ast.
- Use dev_groups in malidp.
- Add per pixel alpha support for PX30 VOP in rockchip.
- Silence deferred probe logs in panfrost.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/001cd9a6-405d-4e29-43d8-354f53ae4e8b@linux.intel.com
Spelling out _unlocked for each and every driver is a annoying.
Especially if we consider how many drivers, do not know (or need to)
about the horror stories involving struct_mutex.
Just drop the suffix. It makes the API cleaner.
Done via the following script:
__from=drm_gem_object_put_unlocked
__to=drm_gem_object_put
for __file in $(git grep --name-only $__from); do
sed -i "s/$__from/$__to/g" $__file;
done
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515095118.2743122-32-emil.l.velikov@gmail.com
When testing whether or not to enable the use of the SMMU, consult the
supported DMA mask rather than the actually configured DMA mask, since
the latter might already have been restricted.
Fixes: 2d9384ff91 ("drm/tegra: Relax IOMMU usage criteria on old Tegra")
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra DRM drivers includes the legacy GPIO headers
<linux/gpio.h> and <linux/of_gpio.h> but what it really
uses is <linux/gpio/consumer.h> since only gpio_desc
structs are ever referenced.
Include the right header on the top level tegra/drm.h
file and drop all the surplus includes.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415122427.111769-1-linus.walleij@linaro.org
The tegra driver uses empty implementations for its encoders. Replace
the code with the generic simple encoder.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-16-tzimmermann@suse.de
This contains some minor cleanups, nothing too exciting.
-----BEGIN PGP SIGNATURE-----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=xg7O
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.7-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v5.7-rc1
This contains some minor cleanups, nothing too exciting.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313171042.2924890-1-thierry.reding@gmail.com
As a result of commit 987d65d013 (drm: debugfs: make
drm_debugfs_create_files() never fail) and changes to various debugfs
functions in drm/core and across various drivers, there is no need for
the drm_driver.debugfs_init() hook to have a return value. Therefore,
declare it as void.
This also includes refactoring all users of the .debugfs_init() hook to
return void across the subsystem.
v2: include changes to the hook and drivers that use it in one patch to
prevent driver breakage and enable individual successful compilation of
this change.
References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310133121.27913-18-wambui.karugax@gmail.com
Since 987d65d013 (drm: debugfs: make
drm_debugfs_create_files() never fail) there is no need to check the
return value of drm_debugfs_create_files(). Therefore, remove the
return checks and error handling of the drm_debugfs_create_files()
function from various debugfs init functions in drm/tegra and have
them return 0 directly.
v2: remove conversion of tegra_debugfs_init() to void to avoid build
breakage.
References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310133121.27913-2-wambui.karugax@gmail.com
Driver fails to probe with -EPROBE_DEFER, which produces a bit noisy error
message in KMSG during kernel's boot up. This happens because voltage
regulators tend to be probed later than the DRM driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Driver fails to probe with -EPROBE_DEFER if display output isn't ready
yet. This produces a bit noisy error message in KMSG during kernel's boot
up on Tegra20 and Tegra30 because RGB output tends to be probed earlier
than a corresponding voltage regulator driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Runtime PM and RGB output need to be released when host1x client
registration fails. The releasing is missed in the code, let's correct it.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The devm_platform_ioremap_resource() helper replaces few lines of a
boilerplate code with a single line, making code to look cleaner a tad.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
drm_fb_helper_{add,remove}_one_connector() and
drm_fb_helper_single_add_all_connectors() are dummy functions now
and serve no purpose. Hence remove their calls.
This is the preparatory step for removing the
drm_fb_helper_{add,remove}_one_connector() functions from
drm_fb_helper.h
This removal is done using below sementic patch and unused variable
compilation warnings are fixed manually.
@@
@@
- drm_fb_helper_single_add_all_connectors(...);
@@
expression e1;
statement S;
@@
- e1 = drm_fb_helper_single_add_all_connectors(...);
- S
@@
@@
- drm_fb_helper_add_one_connector(...);
@@
@@
- drm_fb_helper_remove_one_connector(...);
Changes since v1:
* Squashed warning fixes into the patch that introduced the
warnings (into 5/7) (Laurent, Emil, Lyude)
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305120434.111091-6-pankaj.laxminarayan.bharadiya@intel.com
The max connector argument for drm_fb_helper_init() isn't used anymore
hence remove it.
All the drm_fb_helper_init() calls are modified with below sementic
patch.
@@
expression E1, E2, E3;
@@
- drm_fb_helper_init(E1,E2, E3)
+ drm_fb_helper_init(E1,E2)
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305120434.111091-2-pankaj.laxminarayan.bharadiya@intel.com
These are a couple of quick fixes for regressions that were found during
the first two weeks of the merge window.
-----BEGIN PGP SIGNATURE-----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=W1SC
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.6-rc1-fixes' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Fixes for v5.6-rc1
These are a couple of quick fixes for regressions that were found during
the first two weeks of the merge window.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206172753.2185390-1-thierry.reding@gmail.com
This partially reverts the DMA API support that was recently merged
because it was causing performance regressions on older Tegra devices.
Unfortunately, the cache maintenance performed by dma_map_sg() and
dma_unmap_sg() causes performance to drop by a factor of 10.
The right solution for this would be to cache mappings for buffers per
consumer device, but that's a bit involved. Instead, we simply revert to
the old behaviour of sharing IOVA mappings when we know that devices can
do so (i.e. they share the same IOMMU domain).
Cc: <stable@vger.kernel.org> # v5.5
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Older Tegra devices only allow addressing 32 bits of memory, so whether
or not the host1x is attached to an IOMMU doesn't matter. host1x IOMMU
attachment is only needed on devices that can address memory beyond the
32-bit boundary and where the host1x doesn't support the wide GATHER
opcode that allows it to access buffers at higher addresses.
Cc: <stable@vger.kernel.org> # v5.5
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Commit fd67e9c6ed ("drm/tegra: Do not implement runtime PM") replaced
the generic runtime PM usage by a host1x bus-specific implementation in
order to work around some assumptions baked into runtime PM that are in
conflict with the requirements in the Tegra DRM driver.
Unfortunately the new runtime PM callbacks are not setup yet at the time
when the SOR driver first needs to resume the device to register the SOR
pad clock, and accesses to register will cause the system to hang.
Note that this only happens on Tegra124 and Tegra210 because those are
the only SoCs where the SOR pad clock is registered from the SOR driver.
Later generations use a SOR pad clock provided by the BPMP.
Fix this by moving the registration of the SOR pad clock after the
host1x client has been registered. That's somewhat suboptimal because
this could potentially, though it's very unlikely, cause the Tegra DRM
to be probed if the SOR happens to be the last subdevice to register,
only to be immediately removed again if the SOR pad output clock fails
to register. That's just a minor annoyance, though, and doesn't justify
implementing a workaround.
Fixes: fd67e9c6ed ("drm/tegra: Do not implement runtime PM")
Signed-off-by: Thierry Reding <treding@nvidia.com>
If the driver fails to probe, make sure to disable runtime PM again.
While at it, make the cleanup code in ->remove() symmetric.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This contains a small set of mostly fixes and some minor improvements.
-----BEGIN PGP SIGNATURE-----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=OBEv
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.6-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v5.6-rc1
This contains a small set of mostly fixes and some minor improvements.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200111004835.2412858-1-thierry.reding@gmail.com
Implement generic system suspend/resume functions that can be used with
any output type. Currently this only implements disabling and enabling
of the IRQ functionality across system suspend/resume. This prevents an
interrupt from happening before the display driver has fully resumed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Without CONFIG_PM, some functions cause harmless warnings:
drivers/gpu/drm/tegra/sor.c:3984:12: error: 'tegra_sor_resume' defined but not used [-Werror=unused-function]
static int tegra_sor_resume(struct device *dev)
^~~~~~~~~~~~~~~~
drivers/gpu/drm/tegra/sor.c:3970:12: error: 'tegra_sor_suspend' defined but not used [-Werror=unused-function]
static int tegra_sor_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~
Mark these as __maybe_unused so the compiler can drop them
silently.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra DRM driver heavily relies on the implementations for runtime
suspend/resume to be called at specific times. Unfortunately, there are
some cases where that doesn't work. One example is if the user disables
runtime PM for a given subdevice. Another example is that the PM core
acquires a reference to runtime PM during system sleep, effectively
preventing devices from going into low power modes. This is intentional
to avoid nasty race conditions, but it also causes system sleep to not
function properly on all Tegra systems.
Fix this by not implementing runtime PM at all. Instead, a minimal,
reference-counted suspend/resume infrastructure is added to the host1x
bus. This has the benefit that it can be used regardless of the system
power state (or any transitions we might be in), or whether or not the
user allows runtime PM.
Atomic modesetting guarantees that these functions will end up being
called at the right point in time, so the pitfalls for the more generic
runtime PM do not apply here.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Rename the host1x clients' parent to "host" because that more closely
describes what it is. The parent can be confused with the parent device
in terms of the device hierarchy. Subsequent patches will add a new
member that refers to the parent in that hierarchy.
Signed-off-by: Thierry Reding <treding@nvidia.com>
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
-----BEGIN PGP SIGNATURE-----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=b15X
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.6:
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
The call to tegra_display_hub_cleanup() that takes care of disabling the
window groups is missing from the driver's ->remove() callback. Call it
to make sure the runtime PM reference counts for the display controllers
are balanced.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The SOR supports multiple display modes, but only when driving an HDMI
monitor does it make sense to control the +5V power supply. eDP and DP
don't need this, so make it optional.
This fixes a crash observed during system suspend/resume.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Subdevices may not be hooked up to an IOMMU via device tree. Detect such
situations and avoid confusing users by not emitting an error message.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Export the module device table to ensure the VIC compatible strings are
listed in the module's aliases table. This in turn causes the driver to
be automatically loaded on boot if VIC is the only enabled subdevice of
the logical host1x DRM device.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Upon system suspend, make sure the +5V HDMI regulator is disabled. This
avoids potentially leaking current to the HDMI connector. This also
makes sure that upon resume the regulator is enabled again, which in
some cases is necessary to properly restore the state of the supply on
resume.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The IOVA address for the cursor is the result of mapping the buffer
object for the given display controller. Make sure to use the proper
IOVA address as stored in the cursor's plane state.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
All the display related blocks on Tegra require contiguous memory. Using
the DMA API, there is no knowing at import time which device will end up
using the buffer, so it's not known whether or not an IOMMU will be used
to map the buffer.
Move the check for non-contiguous buffers/mappings to the tegra_dc_pin()
function which is now the earliest point where it is known if a DMA BUF
can be used by the given device or not.
v2: add check for contiguous buffer/mapping in tegra_dc_pin()
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Buffers that are imported from a DMA-BUF don't have pages allocated with
them. At the same time an SG table for them can't be derived using the
DMA API helpers because the necessary information doesn't exist. However
there's already an SG table that was created during import, so this can
simply be duplicated.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra DRM never actually took that lock, so the driver was broken
until generic locking was added in commit:
commit b962a12050
Author: Rob Clark <robdclark@gmail.com>
Date: Mon Oct 22 14:31:22 2018 +0200
drm/atomic: integrate modeset lock with private objects
It's now no longer necessary to take that lock, so drop the check.
v2: add rationale for why it is now safe to drop the check (Daniel)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
It doesn't have any callers anymore.
Aside: The ->mmap/munmap hooks have a bit a confusing name, they don't
do userspace mmaps, but a kernel vmap. I think most places use vmap
for this, except ttm, which uses kmap for vmap for added confusion.
mmap seems entirely for userspace mappings set up through mmap(2)
syscall.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191118103536.17675-3-daniel.vetter@ffwll.ch
Currently configurations can be generated where IOMMU_SUPPORT is
disabled but IOMMU_IOVA is built as a module and DRM_TEGRA as built-in.
In such a case, the symbols guarded by IOMMU_IOVA will not be available
when linking the Tegra DRM driver and cause a linking failure.
Simplify this by unconditionally selecting IOMMU_IOVA, which makes sure
that it will be forced to =y if DRM_TEGRA=y. Technically we can now get
IOMMU_IOVA code built-in even if we don't use it (Tegra DRM only uses it
when IOMMU_SUPPORT is also enabled), but such configuration are of a
mostly academic nature. In all practical configurations we want IOMMU
support anyway.
Signed-off-by: Thierry Reding <treding@nvidia.com>
If a client is already attached to an IOMMU domain that is not the
shared domain, don't try to attach it again. This allows using the
IOMMU-backed DMA API.
Since the IOMMU-backed DMA API is now supported and there's no way
to detach from it on 64-bit ARM, don't bother to detach from it on
32-bit ARM either.
Signed-off-by: Thierry Reding <treding@nvidia.com>
If a display controller is not attached to an explicit IOMMU domain,
which usually means that it's connected to an IOMMU domain controlled by
the DMA API, make sure to map the framebuffer to the display controller
address space. This allows us to transparently handle setups where the
display controller is attached to an IOMMU or setups where it isn't. It
also allows the driver to work with a DMA API that is backed by an
IOMMU.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Rename paddr -> iova and vaddr -> virt to make it clearer how these
addresses are used. This is important for a subsequent patch that makes
a distinction between the physical address (physical address of the
system memory from the CPU's point of view) and the IOVA (physical
address of the system memory from the device's point of view).
Signed-off-by: Thierry Reding <treding@nvidia.com>
Having to provide allocator hooks to the Falcon library is somewhat
cumbersome and it doesn't give the users of the library a lot of
flexibility to deal with allocations. Instead, remove the notion of
Falcon "operations" and let drivers deal with the memory allocations
themselves.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Daniel Vetter