new method: ->get_link(); replacement of ->follow_link(). The differences
are:
* inode and dentry are passed separately
* might be called both in RCU and non-RCU mode;
the former is indicated by passing it a NULL dentry.
* when called that way it isn't allowed to block
and should return ERR_PTR(-ECHILD) if it needs to be called
in non-RCU mode.
It's a flagday change - the old method is gone, all in-tree instances
converted. Conversion isn't hard; said that, so far very few instances
do not immediately bail out when called in RCU mode. That'll change
in the next commits.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
kmap() in page_follow_link_light() needed to go - allowing to hold
an arbitrary number of kmaps for long is a great way to deadlocking
the system.
new helper (inode_nohighmem(inode)) needs to be used for pagecache
symlinks inodes; done for all in-tree cases. page_follow_link_light()
instrumented to yell about anything missed.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Make DAX fault path use pre-zeroed blocks to avoid races with extent
conversion and zeroing when two page faults to the same block happen.
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
DAX page fault path needs to get blocks that are pre-zeroed to avoid
races when two concurrent page faults happen in the same block of a
file. Implement support for this in ext4_map_blocks().
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Create new function ext4_issue_zeroout() to zeroout contiguous (both
logically and physically) part of inode data. We will need to issue
zeroout when extent structure is not readily available and this function
will allow us to do it without making up fake extent structures.
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When dioread_nolock mode is enabled, we grab i_data_sem in
ext4_ext_direct_IO() and therefore we need to instruct _ext4_get_block()
not to grab i_data_sem again using EXT4_GET_BLOCKS_NO_LOCK. However
holding i_data_sem over overwrite direct IO isn't needed these days. We
have exclusion against truncate / hole punching because we increase
i_dio_count under i_mutex in ext4_ext_direct_IO() so once
ext4_file_write_iter() verifies blocks are allocated & written, they are
guaranteed to stay so during the whole direct IO even after we drop
i_mutex.
So we can just remove this locking abuse and the no longer necessary
EXT4_GET_BLOCKS_NO_LOCK flag.
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We have enough locks that it's probably worth documenting the lock
ordering rules we have in ext4.
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When doing delayed allocation, update of on-disk inode size is postponed
until IO submission time. However hole punch or zero range fallocate
calls can end up discarding the tail page cache page and thus on-disk
inode size would never be properly updated.
Make sure the on-disk inode size is updated before truncating page
cache.
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Current code implementing FALLOC_FL_COLLAPSE_RANGE and
FALLOC_FL_INSERT_RANGE is prone to races with buffered writes and page
faults. If buffered write or write via mmap manages to squeeze between
filemap_write_and_wait_range() and truncate_pagecache() in the fallocate
implementations, the written data is simply discarded by
truncate_pagecache() although it should have been shifted.
Fix the problem by moving filemap_write_and_wait_range() call inside
i_mutex and i_mmap_sem. That way we are protected against races with
both buffered writes and page faults.
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently ext4_alloc_file_blocks() was handling protection against
unlocked DIO. However we now need to sometimes call it under i_mmap_sem
and sometimes not and DIO protection ranks above it (although strictly
speaking this cannot currently create any deadlocks). Also
ext4_zero_range() was actually getting & releasing unlocked DIO
protection twice in some cases. Luckily it didn't introduce any real bug
but it was a land mine waiting to be stepped on. So move DIO protection
out from ext4_alloc_file_blocks() into the two callsites.
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, page faults and hole punching are completely unsynchronized.
This can result in page fault faulting in a page into a range that we
are punching after truncate_pagecache_range() has been called and thus
we can end up with a page mapped to disk blocks that will be shortly
freed. Filesystem corruption will shortly follow. Note that the same
race is avoided for truncate by checking page fault offset against
i_size but there isn't similar mechanism available for punching holes.
Fix the problem by creating new rw semaphore i_mmap_sem in inode and
grab it for writing over truncate, hole punching, and other functions
removing blocks from extent tree and for read over page faults. We
cannot easily use i_data_sem for this since that ranks below transaction
start and we need something ranking above it so that it can be held over
the whole truncate / hole punching operation. Also remove various
workarounds we had in the code to reduce race window when page fault
could have created pages with stale mapping information.
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
some endian conversion problems with ext4 encryption, potential memory
leaks after truncate in data=journal mode, and an ocfs2 regression
caused by a jbd2 performance improvement.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJWZP5/AAoJEPL5WVaVDYGjLUwH+wZUMghNAiR+AUEDW5MwbRMd
XGvPFr1ohs9ep6vrayRLAVU+BDbcSvL7GRddFpUabTfDqH6tyk43IqOFaE2UMefj
+k61vUnEaD7hTOGtgnfkntAcrE8hngTA1UkEGRTRQjRSqKgt1ku2LB/GfGbgv4Yq
1grwLbq/MRZ6gSZIv8TwuLC7BOAt6mLtxtJB8ozRuhVJVo1gzy1IvXkqn2mgf/h4
nIq6i720NxZS9HqncA/o1rxfWb2bwEpLj5MYqdgscwHBGql0riHM0HOebAbgvVqV
FgLM81p4qVry8N4ACNLIJsqjWu3eMcNUZFW3vaObGTg2tODTj8WSEClb56Z6fpE=
=iOzG
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Ext4 bug fixes for v4.4, including fixes for post-2038 time encodings,
some endian conversion problems with ext4 encryption, potential memory
leaks after truncate in data=journal mode, and an ocfs2 regression
caused by a jbd2 performance improvement"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd2: fix null committed data return in undo_access
ext4: add "static" to ext4_seq_##name##_fops struct
ext4: fix an endianness bug in ext4_encrypted_follow_link()
ext4: fix an endianness bug in ext4_encrypted_zeroout()
jbd2: Fix unreclaimed pages after truncate in data=journal mode
ext4: Fix handling of extended tv_sec
Add an additional "name" field to struct xattr_handler. When the name
is set, the handler matches attributes with exactly that name. When the
prefix is set instead, the handler matches attributes with the given
prefix and with a non-empty suffix.
This patch should avoid bugs like the one fixed in commit c361016a in
the future.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
applying le32_to_cpu() to 16bit value is a bad idea...
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ex->ee_block is not host-endian (note that accesses of other fields
of *ex right next to that line go through the helpers that do proper
conversion from little-endian to host-endian; it might make sense
to add similar for ->ee_block to avoid reintroducing that kind of
bugs...)
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In ext4, the bottom two bits of {a,c,m}time_extra are used to extend
the {a,c,m}time fields, deferring the year 2038 problem to the year
2446.
When decoding these extended fields, for times whose bottom 32 bits
would represent a negative number, sign extension causes the 64-bit
extended timestamp to be negative as well, which is not what's
intended. This patch corrects that issue, so that the only negative
{a,c,m}times are those between 1901 and 1970 (as per 32-bit signed
timestamps).
Some older kernels might have written pre-1970 dates with 1,1 in the
extra bits. This patch treats those incorrectly-encoded dates as
pre-1970, instead of post-2311, until kernel 4.20 is released.
Hopefully by then e2fsck will have fixed up the bad data.
Also add a comment explaining the encoding of ext4's extra {a,c,m}time
bits.
Signed-off-by: David Turner <novalis@novalis.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Mark Harris <mh8928@yahoo.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23732
Cc: stable@vger.kernel.org
Similar to XFS warn when mounting DAX while it is still considered under
development. Also, aspects of the DAX implementation, for example
synchronization against multiple faults and faults causing block
allocation, depend on the correct implementation in the filesystem. The
maturity of a given DAX implementation is filesystem specific.
Cc: <stable@vger.kernel.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: linux-ext4@vger.kernel.org
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dave Chinner <david@fromorbit.com>
Acked-by: Jan Kara <jack@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The xattr_handler operations are currently all passed a file system
specific flags value which the operations can use to disambiguate between
different handlers; some file systems use that to distinguish the xattr
namespace, for example. In some oprations, it would be useful to also have
access to the handler prefix. To allow that, pass a pointer to the handler
to operations instead of the flags value alone.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull vfs update from Al Viro:
- misc stable fixes
- trivial kernel-doc and comment fixups
- remove never-used block_page_mkwrite() wrapper function, and rename
the function that is _actually_ used to not have double underscores.
* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: 9p: cache.h: Add #define of include guard
vfs: remove stale comment in inode_operations
vfs: remove unused wrapper block_page_mkwrite()
binfmt_elf: Correct `arch_check_elf's description
fs: fix writeback.c kernel-doc warnings
fs: fix inode.c kernel-doc warning
fs/pipe.c: return error code rather than 0 in pipe_write()
fs/pipe.c: preserve alloc_file() error code
binfmt_elf: Don't clobber passed executable's file header
FS-Cache: Handle a write to the page immediately beyond the EOF marker
cachefiles: perform test on s_blocksize when opening cache file.
FS-Cache: Don't override netfs's primary_index if registering failed
FS-Cache: Increase reference of parent after registering, netfs success
debugfs: fix refcount imbalance in start_creating
The function currently called "__block_page_mkwrite()" used to be called
"block_page_mkwrite()" until a wrapper for this function was added by:
commit 24da4fab5a ("vfs: Create __block_page_mkwrite() helper passing
error values back")
This wrapper, the current "block_page_mkwrite()", is currently unused.
__block_page_mkwrite() is used directly by ext4, nilfs2 and xfs.
Remove the unused wrapper, rename __block_page_mkwrite() back to
block_page_mkwrite() and update the comment above block_page_mkwrite().
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.com>
Cc: Jan Kara <jack@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Switch everything to the new and more capable implementation of abs().
Mainly to give the new abs() a bit of a workout.
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge second patch-bomb from Andrew Morton:
- most of the rest of MM
- procfs
- lib/ updates
- printk updates
- bitops infrastructure tweaks
- checkpatch updates
- nilfs2 update
- signals
- various other misc bits: coredump, seqfile, kexec, pidns, zlib, ipc,
dma-debug, dma-mapping, ...
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (102 commits)
ipc,msg: drop dst nil validation in copy_msg
include/linux/zutil.h: fix usage example of zlib_adler32()
panic: release stale console lock to always get the logbuf printed out
dma-debug: check nents in dma_sync_sg*
dma-mapping: tidy up dma_parms default handling
pidns: fix set/getpriority and ioprio_set/get in PRIO_USER mode
kexec: use file name as the output message prefix
fs, seqfile: always allow oom killer
seq_file: reuse string_escape_str()
fs/seq_file: use seq_* helpers in seq_hex_dump()
coredump: change zap_threads() and zap_process() to use for_each_thread()
coredump: ensure all coredumping tasks have SIGNAL_GROUP_COREDUMP
signal: remove jffs2_garbage_collect_thread()->allow_signal(SIGCONT)
signal: introduce kernel_signal_stop() to fix jffs2_garbage_collect_thread()
signal: turn dequeue_signal_lock() into kernel_dequeue_signal()
signals: kill block_all_signals() and unblock_all_signals()
nilfs2: fix gcc uninitialized-variable warnings in powerpc build
nilfs2: fix gcc unused-but-set-variable warnings
MAINTAINERS: nilfs2: add header file for tracing
nilfs2: add tracepoints for analyzing reading and writing metadata files
...
Pull trivial updates from Jiri Kosina:
"Trivial stuff from trivial tree that can be trivially summed up as:
- treewide drop of spurious unlikely() before IS_ERR() from Viresh
Kumar
- cosmetic fixes (that don't really affect basic functionality of the
driver) for pktcdvd and bcache, from Julia Lawall and Petr Mladek
- various comment / printk fixes and updates all over the place"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
bcache: Really show state of work pending bit
hwmon: applesmc: fix comment typos
Kconfig: remove comment about scsi_wait_scan module
class_find_device: fix reference to argument "match"
debugfs: document that debugfs_remove*() accepts NULL and error values
net: Drop unlikely before IS_ERR(_OR_NULL)
mm: Drop unlikely before IS_ERR(_OR_NULL)
fs: Drop unlikely before IS_ERR(_OR_NULL)
drivers: net: Drop unlikely before IS_ERR(_OR_NULL)
drivers: misc: Drop unlikely before IS_ERR(_OR_NULL)
UBI: Update comments to reflect UBI_METAONLY flag
pktcdvd: drop null test before destroy functions
There are many places which use mapping_gfp_mask to restrict a more
generic gfp mask which would be used for allocations which are not
directly related to the page cache but they are performed in the same
context.
Let's introduce a helper function which makes the restriction explicit and
easier to track. This patch doesn't introduce any functional changes.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__GFP_WAIT has been used to identify atomic context in callers that hold
spinlocks or are in interrupts. They are expected to be high priority and
have access one of two watermarks lower than "min" which can be referred
to as the "atomic reserve". __GFP_HIGH users get access to the first
lower watermark and can be called the "high priority reserve".
Over time, callers had a requirement to not block when fallback options
were available. Some have abused __GFP_WAIT leading to a situation where
an optimisitic allocation with a fallback option can access atomic
reserves.
This patch uses __GFP_ATOMIC to identify callers that are truely atomic,
cannot sleep and have no alternative. High priority users continue to use
__GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and
are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify
callers that want to wake kswapd for background reclaim. __GFP_WAIT is
redefined as a caller that is willing to enter direct reclaim and wake
kswapd for background reclaim.
This patch then converts a number of sites
o __GFP_ATOMIC is used by callers that are high priority and have memory
pools for those requests. GFP_ATOMIC uses this flag.
o Callers that have a limited mempool to guarantee forward progress clear
__GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall
into this category where kswapd will still be woken but atomic reserves
are not used as there is a one-entry mempool to guarantee progress.
o Callers that are checking if they are non-blocking should use the
helper gfpflags_allow_blocking() where possible. This is because
checking for __GFP_WAIT as was done historically now can trigger false
positives. Some exceptions like dm-crypt.c exist where the code intent
is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to
flag manipulations.
o Callers that built their own GFP flags instead of starting with GFP_KERNEL
and friends now also need to specify __GFP_KSWAPD_RECLAIM.
The first key hazard to watch out for is callers that removed __GFP_WAIT
and was depending on access to atomic reserves for inconspicuous reasons.
In some cases it may be appropriate for them to use __GFP_HIGH.
The second key hazard is callers that assembled their own combination of
GFP flags instead of starting with something like GFP_KERNEL. They may
now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless
if it's missed in most cases as other activity will wake kswapd.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
userspace utilities to change the file system's UUID without rewriting
all of the file system metadata.
A number of miscellaneous fixes, the most significant of which are in
the ext4 encryption support. Anyone wishing to use the encryption
feature should backport all of the ext4 crypto patches up to 4.4 to
get fixes to a memory leak and file system corruption bug.
There are also cleanups in ext4's feature test macros and in ext4's
sysfs support code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJWPMOAAAoJEPL5WVaVDYGjDYAH/jVIz+WpPkZn/J1Oepy1WPDm
Azxv+tUvKffXQ7sRwGZEU7snLaeamKxtrvHUXKLT4PIQB6m6o4/kk8o71ovv5PRT
FvuMz1j7qsqEk5ZFQnqI7xosao/RovjfkvL5g+WsAN//C+vxO35bg4fVvZmf73GQ
vloe6igM/qxiUAuMX0jlXjUI1Zyo+H3bXOC6LjnUCOPwZMRcQ9zMtoYjkWryTzo1
4udepGRSfcWeZkWXqt9KIe6slYRmq3BtXWJ0+Zvx6gKWrXVIisINLDHYAEVBXAf4
6VUiDKL6wIytkwt3vGwYSY11wNQC5ky3qV/tJlPnpbYfUP0vEvT4UXljoaR/YQc=
=m3Q9
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Add support for the CSUM_SEED feature which will allow future
userspace utilities to change the file system's UUID without rewriting
all of the file system metadata.
A number of miscellaneous fixes, the most significant of which are in
the ext4 encryption support. Anyone wishing to use the encryption
feature should backport all of the ext4 crypto patches up to 4.4 to
get fixes to a memory leak and file system corruption bug.
There are also cleanups in ext4's feature test macros and in ext4's
sysfs support code"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (26 commits)
fs/ext4: remove unnecessary new_valid_dev check
ext4: fix abs() usage in ext4_mb_check_group_pa
ext4: do not allow journal_opts for fs w/o journal
ext4: explicit mount options parsing cleanup
ext4, jbd2: ensure entering into panic after recording an error in superblock
[PATCH] fix calculation of meta_bg descriptor backups
ext4: fix potential use after free in __ext4_journal_stop
jbd2: fix checkpoint list cleanup
ext4: fix xfstest generic/269 double revoked buffer bug with bigalloc
ext4: make the bitmap read routines return real error codes
jbd2: clean up feature test macros with predicate functions
ext4: clean up feature test macros with predicate functions
ext4: call out CRC and corruption errors with specific error codes
ext4: store checksum seed in superblock
ext4: reserve code points for the project quota feature
ext4: promote ext4 over ext2 in the default probe order
jbd2: gate checksum calculations on crc driver presence, not sb flags
ext4: use private version of page_zero_new_buffers() for data=journal mode
ext4 crypto: fix bugs in ext4_encrypted_zeroout()
ext4 crypto: replace some BUG_ON()'s with error checks
...
Pull security subsystem update from James Morris:
"This is mostly maintenance updates across the subsystem, with a
notable update for TPM 2.0, and addition of Jarkko Sakkinen as a
maintainer of that"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (40 commits)
apparmor: clarify CRYPTO dependency
selinux: Use a kmem_cache for allocation struct file_security_struct
selinux: ioctl_has_perm should be static
selinux: use sprintf return value
selinux: use kstrdup() in security_get_bools()
selinux: use kmemdup in security_sid_to_context_core()
selinux: remove pointless cast in selinux_inode_setsecurity()
selinux: introduce security_context_str_to_sid
selinux: do not check open perm on ftruncate call
selinux: change CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE default
KEYS: Merge the type-specific data with the payload data
KEYS: Provide a script to extract a module signature
KEYS: Provide a script to extract the sys cert list from a vmlinux file
keys: Be more consistent in selection of union members used
certs: add .gitignore to stop git nagging about x509_certificate_list
KEYS: use kvfree() in add_key
Smack: limited capability for changing process label
TPM: remove unnecessary little endian conversion
vTPM: support little endian guests
char: Drop owner assignment from i2c_driver
...
As new_valid_dev always returns 1, so !new_valid_dev check is not
needed, remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The ext4_fsblk_t type is a long long, which should not be used
with abs(), as is done in ext4_mb_check_group_pa().
This patch modifies ext4_mb_check_group_pa() to use abs64()
instead.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It is appeared that we can pass journal related mount options and such options
be shown in /proc/mounts
Example:
#mkfs.ext4 -F /dev/vdb
#tune2fs -O ^has_journal /dev/vdb
#mount /dev/vdb /mnt/ -ocommit=20,journal_async_commit
#cat /proc/mounts | grep /mnt
/dev/vdb /mnt ext4 rw,relatime,journal_checksum,journal_async_commit,commit=20,data=ordered 0 0
But options:"journal_checksum,journal_async_commit,commit=20,data=ordered" has
nothing with reality because there is no journal at all.
This patch disallow following options for journalless configurations:
- journal_checksum
- journal_async_commit
- commit=%ld
- data={writeback,ordered,journal}
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Currently MOPT_EXPLICIT treated as EXPLICIT_DELALLOC which may be changed
in future. Let's fix it now.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If a EXT4 filesystem utilizes JBD2 journaling and an error occurs, the
journaling will be aborted first and the error number will be recorded
into JBD2 superblock and, finally, the system will enter into the
panic state in "errors=panic" option. But, in the rare case, this
sequence is little twisted like the below figure and it will happen
that the system enters into panic state, which means the system reset
in mobile environment, before completion of recording an error in the
journal superblock. In this case, e2fsck cannot recognize that the
filesystem failure occurred in the previous run and the corruption
wouldn't be fixed.
Task A Task B
ext4_handle_error()
-> jbd2_journal_abort()
-> __journal_abort_soft()
-> __jbd2_journal_abort_hard()
| -> journal->j_flags |= JBD2_ABORT;
|
| __ext4_abort()
| -> jbd2_journal_abort()
| | -> __journal_abort_soft()
| | -> if (journal->j_flags & JBD2_ABORT)
| | return;
| -> panic()
|
-> jbd2_journal_update_sb_errno()
Tested-by: Hobin Woo <hobin.woo@samsung.com>
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
"group" is the group where the backup will be placed, and is
initialized to zero in the declaration. This meant that backups for
meta_bg descriptors were erroneously written to the backup block group
descriptors in groups 1 and (desc_per_block-1).
Reproduction information:
mke2fs -Fq -t ext4 -b 1024 -O ^resize_inode /tmp/foo.img 16G
truncate -s 24G /tmp/foo.img
losetup /dev/loop0 /tmp/foo.img
mount /dev/loop0 /mnt
resize2fs /dev/loop0
umount /dev/loop0
dd if=/dev/zero of=/dev/loop0 bs=1024 count=2
e2fsck -fy /dev/loop0
losetup -d /dev/loop0
Signed-off-by: Andy Leiserson <andy@leiserson.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
There is a use-after-free possibility in __ext4_journal_stop() in the
case that we free the handle in the first jbd2_journal_stop() because
we're referencing handle->h_err afterwards. This was introduced in
9705acd63b and it is wrong. Fix it by
storing the handle->h_err value beforehand and avoid referencing
potentially freed handle.
Fixes: 9705acd63b
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@vger.kernel.org
When you repeatly execute xfstest generic/269 with bigalloc_1k option
enabled using the below command:
"./kvm-xfstests -c bigalloc_1k -m nodelalloc -C 1000 generic/269"
you can easily see the below bug message.
"JBD2 unexpected failure: jbd2_journal_revoke: !buffer_revoked(bh);"
This means that an already revoked buffer is erroneously revoked again
and it is caused by doing revoke for the buffer at the wrong position
in ext4_free_blocks(). We need to re-position the buffer revoke
procedure for an unspecified buffer after checking the cluster boundary
for bigalloc option. If not, some part of the cluster can be doubly
revoked.
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Make the bitmap reaading routines return real error codes (EIO,
EFSCORRUPTED, EFSBADCRC) which can then be reflected back to
userspace for more precise diagnosis work.
In particular, this means that mballoc no longer claims that we're out
of memory if the block bitmaps become corrupt.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Create separate predicate functions to test/set/clear feature flags,
thereby replacing the wordy old macros. Furthermore, clean out the
places where we open-coded feature tests.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Instead of overloading EIO for CRC errors and corrupt structures,
return the same error codes that XFS returns for the same issues.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Allow the filesystem to store the metadata checksum seed in the
superblock and add an incompat feature to say that we're using it.
This enables tune2fs to change the UUID on a mounted metadata_csum
FS without having to (racy!) rewrite all disk metadata.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Merge misc fixes from Andrew Morton:
"6 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
sh: add copy_user_page() alias for __copy_user()
lib/Kconfig: ZLIB_DEFLATE must select BITREVERSE
mm, dax: fix DAX deadlocks
memcg: convert threshold to bytes
builddeb: remove debian/files before build
mm, fs: obey gfp_mapping for add_to_page_cache()
Commit 6afdb859b7 ("mm: do not ignore mapping_gfp_mask in page cache
allocation paths") has caught some users of hardcoded GFP_KERNEL used in
the page cache allocation paths. This, however, wasn't complete and
there were others which went unnoticed.
Dave Chinner has reported the following deadlock for xfs on loop device:
: With the recent merge of the loop device changes, I'm now seeing
: XFS deadlock on my single CPU, 1GB RAM VM running xfs/073.
:
: The deadlocked is as follows:
:
: kloopd1: loop_queue_read_work
: xfs_file_iter_read
: lock XFS inode XFS_IOLOCK_SHARED (on image file)
: page cache read (GFP_KERNEL)
: radix tree alloc
: memory reclaim
: reclaim XFS inodes
: log force to unpin inodes
: <wait for log IO completion>
:
: xfs-cil/loop1: <does log force IO work>
: xlog_cil_push
: xlog_write
: <loop issuing log writes>
: xlog_state_get_iclog_space()
: <blocks due to all log buffers under write io>
: <waits for IO completion>
:
: kloopd1: loop_queue_write_work
: xfs_file_write_iter
: lock XFS inode XFS_IOLOCK_EXCL (on image file)
: <wait for inode to be unlocked>
:
: i.e. the kloopd, with it's split read and write work queues, has
: introduced a dependency through memory reclaim. i.e. that writes
: need to be able to progress for reads make progress.
:
: The problem, fundamentally, is that mpage_readpages() does a
: GFP_KERNEL allocation, rather than paying attention to the inode's
: mapping gfp mask, which is set to GFP_NOFS.
:
: The didn't used to happen, because the loop device used to issue
: reads through the splice path and that does:
:
: error = add_to_page_cache_lru(page, mapping, index,
: GFP_KERNEL & mapping_gfp_mask(mapping));
This has changed by commit aa4d86163e ("block: loop: switch to VFS
ITER_BVEC").
This patch changes mpage_readpage{s} to follow gfp mask set for the
mapping. There are, however, other places which are doing basically the
same.
lustre:ll_dir_filler is doing GFP_KERNEL from the function which
apparently uses GFP_NOFS for other allocations so let's make this
consistent.
cifs:readpages_get_pages is called from cifs_readpages and
__cifs_readpages_from_fscache called from the same path obeys mapping
gfp.
ramfs_nommu_expand_for_mapping is hardcoding GFP_KERNEL as well
regardless it uses mapping_gfp_mask for the page allocation.
ext4_mpage_readpages is the called from the page cache allocation path
same as read_pages and read_cache_pages
As I've noticed in my previous post I cannot say I would be happy about
sprinkling mapping_gfp_mask all over the place and it sounds like we
should drop gfp_mask argument altogether and use it internally in
__add_to_page_cache_locked that would require all the filesystems to use
mapping gfp consistently which I am not sure is the case here. From a
quick glance it seems that some file system use it all the time while
others are selective.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Dave Chinner <david@fromorbit.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If there is a error while copying data from userspace into the page
cache during a write(2) system call, in data=journal mode, in
ext4_journalled_write_end() were using page_zero_new_buffers() from
fs/buffer.c. Unfortunately, this sets the buffer dirty flag, which is
no good if journalling is enabled. This is a long-standing bug that
goes back for years and years in ext3, but a combination of (a)
data=journal not being very common, (b) in many case it only results
in a warning message. and (c) only very rarely causes the kernel hang,
means that we only really noticed this as a problem when commit
998ef75ddb caused this failure to happen frequently enough to cause
generic/208 to fail when run in data=journal mode.
The fix is to have our own version of this function that doesn't call
mark_dirty_buffer(), since we will end up calling
ext4_handle_dirty_metadata() on the buffer head(s) in questions very
shortly afterwards in ext4_journalled_write_end().
Thanks to Dave Hansen and Linus Torvalds for helping to identify the
root cause of the problem.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.com>
Fix multiple bugs in ext4_encrypted_zeroout(), including one that
could cause us to write an encrypted zero page to the wrong location
on disk, potentially causing data and file system corruption.
Fortunately, this tends to only show up in stress tests, but even with
these fixes, we are seeing some test failures with generic/127 --- but
these are now caused by data failures instead of metadata corruption.
Since ext4_encrypted_zeroout() is only used for some optimizations to
keep the extent tree from being too fragmented, and
ext4_encrypted_zeroout() itself isn't all that optimized from a time
or IOPS perspective, disable the extent tree optimization for
encrypted inodes for now. This prevents the data corruption issues
reported by generic/127 until we can figure out what's going wrong.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Since ext4_page_crypto() doesn't need an encryption context (at least
not any more), this allows us to simplify a number function signature
and also allows us to avoid needing to allocate a context in
ext4_block_write_begin(). It also means we no longer need a separate
ext4_decrypt_one() function.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In cases where the file system block size is the same as the page
size, and ext4_writepage() is asked to write out a page which is
either has the unwritten bit set in the extent tree, or which does not
yet have a block assigned due to delayed allocation, we can bail out
early and, unlocking the page earlier and avoiding a round trip
through ext4_bio_write_page() with the attendant calls to
set_page_writeback() and redirty_page_for_writeback().
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There are times when ext4_bio_write_page() is called even though we
don't actually need to do any I/O. This happens when ext4_writepage()
gets called by the jbd2 commit path when an inode needs to force its
pages written out in order to provide data=ordered guarantees --- and
a page is backed by an unwritten (e.g., uninitialized) block on disk,
or if delayed allocation means the page's backing store hasn't been
allocated yet. In that case, we need to skip the call to
ext4_encrypt_page(), since in addition to wasting CPU, it leads to a
bounce page and an ext4 crypto context getting leaked.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
IS_ERR(_OR_NULL) already contain an 'unlikely' compiler flag and there
is no need to do that again from its callers. Drop it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve French <smfrench@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Configuration option EXT4_USE_FOR_EXT2 has no effect on ext3 support.
Support for ext3 is always included now.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: c290ea01ab ("fs: Remove ext3 filesystem driver")
Cc: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.com>
This allows us to refactor the procfs code, which saves a bit of
compiled space. More importantly it isolates most of the procfs
support code into a single file, so it's easier to #ifdef it out if
the proc file system has been disabled.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Also statically allocate the ext4_kset and ext4_feat objects, since we
only need exactly one of each, and it's simpler and less code if we
drop the dynamic allocation and deallocation when it's not needed.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara pointed out that in the case where we are writing to a hole, we
can end up with a lock inversion between the page lock and the journal
lock. We can avoid this by starting the transaction in ext4 before
calling into DAX. The journal lock nests inside the superblock
pagefault lock, so we have to duplicate that code from dax_fault, like
XFS does.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
DAX wants different semantics from any currently-existing ext4 get_block
callback. Unlike ext4_get_block_write(), it needs to honour the
'create' flag, and unlike ext4_get_block(), it needs to be able to
return unwritten extents. So introduce a new ext4_get_block_dax() which
has those semantics.
We could also change ext4_get_block_write() to honour the 'create' flag,
but that might have consequences on other users that I do not currently
understand.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
DAX relies on the get_block function either zeroing newly allocated
blocks before they're findable by subsequent calls to get_block, or
marking newly allocated blocks as unwritten. ext4_get_block() cannot
create unwritten extents, but ext4_get_block_write() can.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reported-by: Andy Rudoff <andy.rudoff@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use DAX to provide support for huge pages.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In order to handle the !CONFIG_TRANSPARENT_HUGEPAGES case, we need to
return VM_FAULT_FALLBACK from the inlined dax_pmd_fault(), which is
defined in linux/mm.h. Given that we don't want to include <linux/mm.h>
in <linux/fs.h>, the easiest solution is to move the DAX-related
functions to a new header, <linux/dax.h>. We could also have moved
VM_FAULT_* definitions to a new header, or a different header that isn't
quite such a boil-the-ocean header as <linux/mm.h>, but this felt like
the best option.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many file systems that implement the show_options hook fail to correctly
escape their output which could lead to unescaped characters (e.g. new
lines) leaking into /proc/mounts and /proc/[pid]/mountinfo files. This
could lead to confusion, spoofed entries (resulting in things like
systemd issuing false d-bus "mount" notifications), and who knows what
else. This looks like it would only be the root user stepping on
themselves, but it's possible weird things could happen in containers or
in other situations with delegated mount privileges.
Here's an example using overlay with setuid fusermount trusting the
contents of /proc/mounts (via the /etc/mtab symlink). Imagine the use
of "sudo" is something more sneaky:
$ BASE="ovl"
$ MNT="$BASE/mnt"
$ LOW="$BASE/lower"
$ UP="$BASE/upper"
$ WORK="$BASE/work/ 0 0
none /proc fuse.pwn user_id=1000"
$ mkdir -p "$LOW" "$UP" "$WORK"
$ sudo mount -t overlay -o "lowerdir=$LOW,upperdir=$UP,workdir=$WORK" none /mnt
$ cat /proc/mounts
none /root/ovl/mnt overlay rw,relatime,lowerdir=ovl/lower,upperdir=ovl/upper,workdir=ovl/work/ 0 0
none /proc fuse.pwn user_id=1000 0 0
$ fusermount -u /proc
$ cat /proc/mounts
cat: /proc/mounts: No such file or directory
This fixes the problem by adding new seq_show_option and
seq_show_option_n helpers, and updating the vulnerable show_option
handlers to use them as needed. Some, like SELinux, need to be open
coded due to unusual existing escape mechanisms.
[akpm@linux-foundation.org: add lost chunk, per Kees]
[keescook@chromium.org: seq_show_option should be using const parameters]
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Jan Kara <jack@suse.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Cc: J. R. Okajima <hooanon05g@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
features and other churn going into 4.2.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJV55TlAAoJEPL5WVaVDYGjyzYH/1WtZpIzRjp7o+3H4/vFqONg
R1Fsw785C1w8WX2QuIK/m31u4XO+VeCV4jWA9DuqnSzWm9w9C/4kTqITd4Hwp416
/9gJvYoZHHaDikxpWWADptDi8IoLohTlcFVCHIvvf53cGehVEEsc2WOijUZo7Cgv
O454Nm3tK0CQ3yrCIlf5SyvkUZSMTiawLLJJzd4GCyvU13C1SnABNQj8UxKisBA5
cP8q4O2nPg/S9rkYxnFAifQyZppd3jMvorUaq9eHiWMjl95o6e/6+wYGnHhoFUvr
/P1dNjJYbzk+TUzlsDkq2zANK2UsB3iNNi8YwLFOpfFcuYopmUAYRIWOgIZWYUQ=
=ijuI
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Pretty much all bug fixes and clean ups for 4.3, after a lot of
features and other churn going into 4.2"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
Revert "ext4: remove block_device_ejected"
ext4: ratelimit the file system mounted message
ext4: silence a format string false positive
ext4: simplify some code in read_mmp_block()
ext4: don't manipulate recovery flag when freezing no-journal fs
jbd2: limit number of reserved credits
ext4 crypto: remove duplicate header file
ext4: update c/mtime on truncate up
jbd2: avoid infinite loop when destroying aborted journal
ext4, jbd2: add REQ_FUA flag when recording an error in the superblock
ext4 crypto: fix spelling typo in comment
ext4 crypto: exit cleanly if ext4_derive_key_aes() fails
ext4: reject journal options for ext2 mounts
ext4: implement cgroup writeback support
ext4: replace ext4_io_submit->io_op with ->io_wbc
ext4 crypto: check for too-short encrypted file names
ext4 crypto: use a jbd2 transaction when adding a crypto policy
jbd2: speedup jbd2_journal_dirty_metadata()
Pull ext3 removal, quota & udf fixes from Jan Kara:
"The biggest change in the pull is the removal of ext3 filesystem
driver (~28k lines removed). Ext4 driver is a full featured
replacement these days and both RH and SUSE use it for several years
without issues. Also there are some workarounds in VM & block layer
mainly for ext3 which we could eventually get rid of.
Other larger change is addition of proper error handling for
dquot_initialize(). The rest is small fixes and cleanups"
[ I wasn't convinced about the ext3 removal and worried about things
falling through the cracks for legacy users, but ext4 maintainers
piped up and were all unanimously in favor of removal, and maintaining
all legacy ext3 support inside ext4. - Linus ]
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Don't modify filesystem for read-only mounts
quota: remove an unneeded condition
ext4: memory leak on error in ext4_symlink()
mm/Kconfig: NEED_BOUNCE_POOL: clean-up condition
ext4: Improve ext4 Kconfig test
block: Remove forced page bouncing under IO
fs: Remove ext3 filesystem driver
doc: Update doc about journalling layer
jfs: Handle error from dquot_initialize()
reiserfs: Handle error from dquot_initialize()
ocfs2: Handle error from dquot_initialize()
ext4: Handle error from dquot_initialize()
ext2: Handle error from dquot_initalize()
quota: Propagate error from ->acquire_dquot()
The xfstests ext4/305 will mount and unmount the same file system over
4,000 times, and each one of these will cause a system log message.
Ratelimit this message since if we are getting more than a few dozen
of these messages, they probably aren't going to be helpful.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Static checkers complain that the format string should be "%s". It does
not make a difference for the current code.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
My static check complains because we have:
if (!*bh)
return -ENOMEM;
if (*bh) {
The second check is unnecessary.
I've simplified this code by moving the "if (!*bh)" checks around. Also
Andreas Dilger says we should probably print a warning if sb_getblk()
fails.
[ Restructured the code so that we print a warning message as well if
the mmp block doesn't check out, and to print the error code to
disambiguate between the error cases. - TYT ]
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
At some point along this sequence of changes:
f6e63f9 ext4: fold ext4_nojournal_sops into ext4_sops
bb04457 ext4: support freezing ext2 (nojournal) file systems
9ca9238 ext4: Use separate super_operations structure for no_journal filesystems
ext4 started setting needs_recovery on filesystems without journals
when they are unfrozen. This makes no sense, and in fact confuses
blkid to the point where it doesn't recognize the filesystem at all.
(freeze ext2; unfreeze ext2; run blkid; see no output; run dumpe2fs,
see needs_recovery set on fs w/ no journal).
To fix this, don't manipulate the INCOMPAT_RECOVER feature on
filesystems without journals.
Reported-by: Stu Mark <smark@datto.com>
Reviewed-by: Jan Kara <jack@suse.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
We can always fill up the bio now, no need to estimate the possible
size based on queue parameters.
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
[hch: rebased and wrote a changelog]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently we have two different ways to signal an I/O error on a BIO:
(1) by clearing the BIO_UPTODATE flag
(2) by returning a Linux errno value to the bi_end_io callback
The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario. Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.
So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Commit 3da40c7b08 ("ext4: only call ext4_truncate when size <= isize")
introduced a bug that c/mtime is not updated on truncate up.
Fix the issue by setting c/mtime explicitly in the truncate up case.
Note that ftruncate(2) is not affected, so you won't see this bug using
truncate(1) and xfs_io(1).
Signed-off-by: Zirong Lang <zorro.lang@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We should release "sd" before returning.
Fixes: 0fa12ad1b285 ('ext4: Handle error from dquot_initialize()')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Kara <jack@suse.com>
Now that ext4 driver must be used to access ext3 filesystems, improve
the Kconfig help text to better explain that using ext4 driver to access
the filesystem is fully compatible with the old ext3 driver.
Acked-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.com>
The functionality of ext3 is fully supported by ext4 driver. Major
distributions (SUSE, RedHat) already use ext4 driver to handle ext3
filesystems for quite some time. There is some ugliness in mm resulting
from jbd cleaning buffers in a dirty page without cleaning page dirty
bit and also support for buffer bouncing in the block layer when stable
pages are required is there only because of jbd. So let's remove the
ext3 driver. This saves us some 28k lines of duplicated code.
Acked-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
When an error condition is detected, an error status should be recorded into
superblocks of EXT4 or JBD2. However, the write request is submitted now
without REQ_FUA flag, even in "barrier=1" mode, which is followed by
panic() function in "errors=panic" mode. On mobile devices which make
whole system reset as soon as kernel panic occurs, this write request
containing an error flag will disappear just from storage cache without
written to the physical cells. Therefore, when next start, even forever,
the error flag cannot be shown in both superblocks, and e2fsck cannot fix
the filesystem problems automatically, unless e2fsck is executed in
force checking mode.
[ Changed use test_opt(sb, BARRIER) of checking the journal flags -- TYT ]
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Return value of ext4_derive_key_aes() is stored but not used.
Add test to exit cleanly if ext4_derive_key_aes() fail.
Also fix coverity CID 1309760.
Signed-off-by: Laurent Navet <laurent.navet@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There is no reason to allow ext2 filesystems be mounted with journal
mount options. So, this patch adds them to the MOPT_NO_EXT2 mount
options list.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For ordered and writeback data modes, all data IOs go through
ext4_io_submit. This patch adds cgroup writeback support by invoking
wbc_init_bio() from io_submit_init_bio() and wbc_account_io() in
io_submit_add_bh(). Journal data which is written by jbd2 worker is
left alone by this patch and will always be written out from the root
cgroup.
ext4_fill_super() is updated to set MS_CGROUPWB when data mode is
either ordered or writeback. In journaled data mode, most IOs become
synchronous through the journal and enabling cgroup writeback support
doesn't make much sense or difference. Journaled data mode is left
alone.
Lightly tested with sequential data write workload. Behaves as
expected.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_io_submit_init() takes the pointer to writeback_control to test
its sync_mode and determine between WRITE and WRITE_SYNC and records
the result in ->io_op. This patch makes it record the pointer
directly and moves the test to ext4_io_submit().
This doesn't cause any noticeable differences now but having
writeback_control available throughout IO submission path will be
depended upon by the planned cgroup writeback support.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
An encrypted file name should never be shorter than an 16 bytes, the
AES block size. The 3.10 crypto layer will oops and crash the kernel
if ciphertext shorter than the block size is passed to it.
Fortunately, in modern kernels the crypto layer will not crash the
kernel in this scenario, but nevertheless, it represents a corrupted
directory, and we should detect it and mark the file system as
corrupted so that e2fsck can fix this.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Start a jbd2 transaction, and mark the inode dirty on the inode under
that transaction after setting the encrypt flag. Otherwise if the
directory isn't modified after setting the crypto policy, the
encrypted flag might not survive the inode getting pushed out from
memory, or the the file system getting unmounted and remounted.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The FITRIM ioctl has the same arguments on 32-bit and 64-bit
architectures, so we can add it to the list of compatible ioctls and
drop it from compat_ioctl method of various filesystems.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ted Ts'o <tytso@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* address corner cases for indirect blocks->extent migration
* fix reserved block accounting invalidate_page when
page_size != block_size (i.e., ppc or 1k block size file systems)
* fix deadlocks when a memcg is under heavy memory pressure
* fix fencepost error in lazytime optimization
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVmW27AAoJEPL5WVaVDYGjmEkIAJsGHVIKur1Kp//FhejSB/wI
B0d+UuQt5kdAE3lNxC7lHO1NqIhvnS7eBho+52LG8V4JDRrzTbE1GdbsBhAIk6FW
CcsQvsHAI99QJMdqOCachu/+nhCwIINGkxmbumhNaZoJPn6wmGQzCA3Cn5qmnGnK
Ctbk6li1HuMXyzbbvxCLfaD/xCUs1NCdufEnRU44i0U4OfaYNpiAhddeGIQ8WMEQ
G14l2JvhIfye6fG8lnCzfacFvnT9zvvSGfRO3ZQjC4Az1EogIUbhCPLvq0ebDbPp
i4eRfrSRdXmMojqmW/knET8skXQVZVnD7LWuvkue+n47UbTH2c0roTbp4l76W+U=
=x8Cc
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bugfixes from Ted Ts'o:
"Bug fixes (all for stable kernels) for ext4:
- address corner cases for indirect blocks->extent migration
- fix reserved block accounting invalidate_page when
page_size != block_size (i.e., ppc or 1k block size file systems)
- fix deadlocks when a memcg is under heavy memory pressure
- fix fencepost error in lazytime optimization"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: replace open coded nofail allocation in ext4_free_blocks()
ext4: correctly migrate a file with a hole at the beginning
ext4: be more strict when migrating to non-extent based file
ext4: fix reservation release on invalidatepage for delalloc fs
ext4: avoid deadlocks in the writeback path by using sb_getblk_gfp
bufferhead: Add _gfp version for sb_getblk()
ext4: fix fencepost error in lazytime optimization
ext4_free_blocks is looping around the allocation request and mimics
__GFP_NOFAIL behavior without any allocation fallback strategy. Let's
remove the open coded loop and replace it with __GFP_NOFAIL. Without the
flag the allocator has no way to find out never-fail requirement and
cannot help in any way.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Pull more vfs updates from Al Viro:
"Assorted VFS fixes and related cleanups (IMO the most interesting in
that part are f_path-related things and Eric's descriptor-related
stuff). UFS regression fixes (it got broken last cycle). 9P fixes.
fs-cache series, DAX patches, Jan's file_remove_suid() work"
[ I'd say this is much more than "fixes and related cleanups". The
file_table locking rule change by Eric Dumazet is a rather big and
fundamental update even if the patch isn't huge. - Linus ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits)
9p: cope with bogus responses from server in p9_client_{read,write}
p9_client_write(): avoid double p9_free_req()
9p: forgetting to cancel request on interrupted zero-copy RPC
dax: bdev_direct_access() may sleep
block: Add support for DAX reads/writes to block devices
dax: Use copy_from_iter_nocache
dax: Add block size note to documentation
fs/file.c: __fget() and dup2() atomicity rules
fs/file.c: don't acquire files->file_lock in fd_install()
fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation
vfs: avoid creation of inode number 0 in get_next_ino
namei: make set_root_rcu() return void
make simple_positive() public
ufs: use dir_pages instead of ufs_dir_pages()
pagemap.h: move dir_pages() over there
remove the pointless include of lglock.h
fs: cleanup slight list_entry abuse
xfs: Correctly lock inode when removing suid and file capabilities
fs: Call security_ops->inode_killpriv on truncate
fs: Provide function telling whether file_remove_privs() will do anything
...
Currently ext4_ind_migrate() doesn't correctly handle a file which
contains a hole at the beginning of the file. This caused the migration
to be done incorrectly, and then if there is a subsequent following
delayed allocation write to the "hole", this would reclaim the same data
blocks again and results in fs corruption.
# assmuing 4k block size ext4, with delalloc enabled
# skip the first block and write to the second block
xfs_io -fc "pwrite 4k 4k" -c "fsync" /mnt/ext4/testfile
# converting to indirect-mapped file, which would move the data blocks
# to the beginning of the file, but extent status cache still marks
# that region as a hole
chattr -e /mnt/ext4/testfile
# delayed allocation writes to the "hole", reclaim the same data block
# again, results in i_blocks corruption
xfs_io -c "pwrite 0 4k" /mnt/ext4/testfile
umount /mnt/ext4
e2fsck -nf /dev/sda6
...
Inode 53, i_blocks is 16, should be 8. Fix? no
...
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Currently the check in ext4_ind_migrate() is not enough before doing the
real conversion:
a) delayed allocated extents could bypass the check on eh->eh_entries
and eh->eh_depth
This can be demonstrated by this script
xfs_io -fc "pwrite 0 4k" -c "pwrite 8k 4k" /mnt/ext4/testfile
chattr -e /mnt/ext4/testfile
where testfile has two extents but still be converted to non-extent
based file format.
b) only extent length is checked but not the offset, which would result
in data lose (delalloc) or fs corruption (nodelalloc), because
non-extent based file only supports at most (12 + 2^10 + 2^20 + 2^30)
blocks
This can be demostrated by
xfs_io -fc "pwrite 5T 4k" /mnt/ext4/testfile
chattr -e /mnt/ext4/testfile
sync
If delalloc is enabled, dmesg prints
EXT4-fs warning (device dm-4): ext4_block_to_path:105: block 1342177280 > max in inode 53
EXT4-fs (dm-4): Delayed block allocation failed for inode 53 at logical offset 1342177280 with max blocks 1 with error 5
EXT4-fs (dm-4): This should not happen!! Data will be lost
If delalloc is disabled, e2fsck -nf shows corruption
Inode 53, i_size is 5497558142976, should be 4096. Fix? no
Fix the two issues by
a) forcing all delayed allocation blocks to be allocated before checking
eh->eh_depth and eh->eh_entries
b) limiting the last logical block of the extent is within direct map
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
On delalloc enabled file system on invalidatepage operation
in ext4_da_page_release_reservation() we want to clear the delayed
buffer and remove the extent covering the delayed buffer from the extent
status tree.
However currently there is a bug where on the systems with page size >
block size we will always remove extents from the start of the page
regardless where the actual delayed buffers are positioned in the page.
This leads to the errors like this:
EXT4-fs warning (device loop0): ext4_da_release_space:1225:
ext4_da_release_space: ino 13, to_free 1 with only 0 reserved data
blocks
This however can cause data loss on writeback time if the file system is
in ENOSPC condition because we're releasing reservation for someones
else delayed buffer.
Fix this by only removing extents that corresponds to the part of the
page we want to invalidate.
This problem is reproducible by the following fio receipt (however I was
only able to reproduce it with fio-2.1 or older.
[global]
bs=8k
iodepth=1024
iodepth_batch=60
randrepeat=1
size=1m
directory=/mnt/test
numjobs=20
[job1]
ioengine=sync
bs=1k
direct=1
rw=randread
filename=file1:file2
[job2]
ioengine=libaio
rw=randwrite
direct=1
filename=file1:file2
[job3]
bs=1k
ioengine=posixaio
rw=randwrite
direct=1
filename=file1:file2
[job5]
bs=1k
ioengine=sync
rw=randread
filename=file1:file2
[job7]
ioengine=libaio
rw=randwrite
filename=file1:file2
[job8]
ioengine=posixaio
rw=randwrite
filename=file1:file2
[job10]
ioengine=mmap
rw=randwrite
bs=1k
filename=file1:file2
[job11]
ioengine=mmap
rw=randwrite
direct=1
filename=file1:file2
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Switch ext4 to using sb_getblk_gfp with GFP_NOFS added to fix possible
deadlocks in the page writeback path.
Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Commit 8f4d8558391: "ext4: fix lazytime optimization" was not a
complete fix. In the case where the inode number is a multiple of 16,
and we could still end up updating an inode with dirty timestamps
written to the wrong inode on disk. Oops.
This can be easily reproduced by using generic/005 with a file system
with metadata_csum and lazytime enabled.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
This update contains:
o A new sparse on-disk inode record format to allow small extents to
be used for inode allocation when free space is fragmented.
o DAX support. This includes minor changes to the DAX core code to
fix problems with lock ordering and bufferhead mapping abuse.
o transaction commit interface cleanup
o removal of various unnecessary XFS specific type definitions
o cleanup and optimisation of freelist preparation before allocation
o various minor cleanups
o bug fixes for
- transaction reservation leaks
- incorrect inode logging in unwritten extent conversion
- mmap lock vs freeze ordering
- remote symlink mishandling
- attribute fork removal issues.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=3x+W
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pul xfs updates from Dave Chinner:
"There's a couple of small API changes to the core DAX code which
required small changes to the ext2 and ext4 code bases, but otherwise
everything is within the XFS codebase.
This update contains:
- A new sparse on-disk inode record format to allow small extents to
be used for inode allocation when free space is fragmented.
- DAX support. This includes minor changes to the DAX core code to
fix problems with lock ordering and bufferhead mapping abuse.
- transaction commit interface cleanup
- removal of various unnecessary XFS specific type definitions
- cleanup and optimisation of freelist preparation before allocation
- various minor cleanups
- bug fixes for
- transaction reservation leaks
- incorrect inode logging in unwritten extent conversion
- mmap lock vs freeze ordering
- remote symlink mishandling
- attribute fork removal issues"
* tag 'xfs-for-linus-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (49 commits)
xfs: don't truncate attribute extents if no extents exist
xfs: clean up XFS_MIN_FREELIST macros
xfs: sanitise error handling in xfs_alloc_fix_freelist
xfs: factor out free space extent length check
xfs: xfs_alloc_fix_freelist() can use incore perag structures
xfs: remove xfs_caddr_t
xfs: use void pointers in log validation helpers
xfs: return a void pointer from xfs_buf_offset
xfs: remove inst_t
xfs: remove __psint_t and __psunsigned_t
xfs: fix remote symlinks on V5/CRC filesystems
xfs: fix xfs_log_done interface
xfs: saner xfs_trans_commit interface
xfs: remove the flags argument to xfs_trans_cancel
xfs: pass a boolean flag to xfs_trans_free_items
xfs: switch remaining xfs_trans_dup users to xfs_trans_roll
xfs: check min blks for random debug mode sparse allocations
xfs: fix sparse inodes 32-bit compile failure
xfs: add initial DAX support
xfs: add DAX IO path support
...
Merge second patchbomb from Andrew Morton:
- most of the rest of MM
- lots of misc things
- procfs updates
- printk feature work
- updates to get_maintainer, MAINTAINERS, checkpatch
- lib/ updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (96 commits)
exit,stats: /* obey this comment */
coredump: add __printf attribute to cn_*printf functions
coredump: use from_kuid/kgid when formatting corename
fs/reiserfs: remove unneeded cast
NILFS2: support NFSv2 export
fs/befs/btree.c: remove unneeded initializations
fs/minix: remove unneeded cast
init/do_mounts.c: add create_dev() failure log
kasan: remove duplicate definition of the macro KASAN_FREE_PAGE
fs/efs: femove unneeded cast
checkpatch: emit "NOTE: <types>" message only once after multiple files
checkpatch: emit an error when there's a diff in a changelog
checkpatch: validate MODULE_LICENSE content
checkpatch: add multi-line handling for PREFER_ETHER_ADDR_COPY
checkpatch: suggest using eth_zero_addr() and eth_broadcast_addr()
checkpatch: fix processing of MEMSET issues
checkpatch: suggest using ether_addr_equal*()
checkpatch: avoid NOT_UNIFIED_DIFF errors on cover-letter.patch files
checkpatch: remove local from codespell path
checkpatch: add --showfile to allow input via pipe to show filenames
...
This makes a very large function a little smaller.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull cgroup writeback support from Jens Axboe:
"This is the big pull request for adding cgroup writeback support.
This code has been in development for a long time, and it has been
simmering in for-next for a good chunk of this cycle too. This is one
of those problems that has been talked about for at least half a
decade, finally there's a solution and code to go with it.
Also see last weeks writeup on LWN:
http://lwn.net/Articles/648292/"
* 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits)
writeback, blkio: add documentation for cgroup writeback support
vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB
writeback: do foreign inode detection iff cgroup writeback is enabled
v9fs: fix error handling in v9fs_session_init()
bdi: fix wrong error return value in cgwb_create()
buffer: remove unusued 'ret' variable
writeback: disassociate inodes from dying bdi_writebacks
writeback: implement foreign cgroup inode bdi_writeback switching
writeback: add lockdep annotation to inode_to_wb()
writeback: use unlocked_inode_to_wb transaction in inode_congested()
writeback: implement unlocked_inode_to_wb transaction and use it for stat updates
writeback: implement [locked_]inode_to_wb_and_lock_list()
writeback: implement foreign cgroup inode detection
writeback: make writeback_control track the inode being written back
writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb()
mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use
writeback: implement memcg writeback domain based throttling
writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes
writeback: implement memcg wb_domain
writeback: update wb_over_bg_thresh() to use wb_domain aware operations
...
Pull core block IO update from Jens Axboe:
"Nothing really major in here, mostly a collection of smaller
optimizations and cleanups, mixed with various fixes. In more detail,
this contains:
- Addition of policy specific data to blkcg for block cgroups. From
Arianna Avanzini.
- Various cleanups around command types from Christoph.
- Cleanup of the suspend block I/O path from Christoph.
- Plugging updates from Shaohua and Jeff Moyer, for blk-mq.
- Eliminating atomic inc/dec of both remaining IO count and reference
count in a bio. From me.
- Fixes for SG gap and chunk size support for data-less (discards)
IO, so we can merge these better. From me.
- Small restructuring of blk-mq shared tag support, freeing drivers
from iterating hardware queues. From Keith Busch.
- A few cfq-iosched tweaks, from Tahsin Erdogan and me. Makes the
IOPS mode the default for non-rotational storage"
* 'for-4.2/core' of git://git.kernel.dk/linux-block: (35 commits)
cfq-iosched: fix other locations where blkcg_to_cfqgd() can return NULL
cfq-iosched: fix sysfs oops when attempting to read unconfigured weights
cfq-iosched: move group scheduling functions under ifdef
cfq-iosched: fix the setting of IOPS mode on SSDs
blktrace: Add blktrace.c to BLOCK LAYER in MAINTAINERS file
block, cgroup: implement policy-specific per-blkcg data
block: Make CFQ default to IOPS mode on SSDs
block: add blk_set_queue_dying() to blkdev.h
blk-mq: Shared tag enhancements
block: don't honor chunk sizes for data-less IO
block: only honor SG gap prevention for merges that contain data
block: fix returnvar.cocci warnings
block, dm: don't copy bios for request clones
block: remove management of bi_remaining when restoring original bi_end_io
block: replace trylock with mutex_lock in blkdev_reread_part()
block: export blkdev_reread_part() and __blkdev_reread_part()
suspend: simplify block I/O handling
block: collapse bio bit space
block: remove unused BIO_RW_BLOCK and BIO_EOF flags
block: remove BIO_EOPNOTSUPP
...
the ext4 encryption patches, which is a new feature added in the last
merge window. Also fix a number of long-standing xfstest failures.
(Quota writes failing due to ENOSPC, a race between truncate and
writepage in data=journalled mode that was causing generic/068 to
fail, and other corner cases.)
Also add support for FALLOC_FL_INSERT_RANGE, and improve jbd2
performance eliminating locking when a buffer is modified more than
once during a transaction (which is very common for allocation
bitmaps, for example), in which case the state of the journalled
buffer head doesn't need to change.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVi3PeAAoJEPL5WVaVDYGj+I0H/jRPexvyvnGfxiqs1sxIlbSk
cwewFJSsuKsy/pGYdmHvozWZyWGGORc89NrxoNwdbG+axvHbgUWt/3+vF+rzmaek
vX4v9QvCEo4PfpRgzbnYJFhbxGMJtwci887sq1o/UoNXikFYT2kz8rpdf0++eO5W
/GJNRA5ZUY0L0eeloUILAMrBr7KjtkI2oXwOZt5q68jh7B3n3XdNQXyEiQS/28aK
QYcFrqA/e2Fiuk6l5OSGBCP38mySu+x0nBTLT5LFwwrUBnoZvGtdjM6Sj/yADDDn
uP/Zpq56aLzkFRwwItrDaF26BIf2MhIH/WUYs65CraEGxjMaiPuzAudGA/iUVL8=
=1BdR
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"A very large number of cleanups and bug fixes --- in particular for
the ext4 encryption patches, which is a new feature added in the last
merge window. Also fix a number of long-standing xfstest failures.
(Quota writes failing due to ENOSPC, a race between truncate and
writepage in data=journalled mode that was causing generic/068 to
fail, and other corner cases.)
Also add support for FALLOC_FL_INSERT_RANGE, and improve jbd2
performance eliminating locking when a buffer is modified more than
once during a transaction (which is very common for allocation
bitmaps, for example), in which case the state of the journalled
buffer head doesn't need to change"
[ I renamed "ext4_follow_link()" to "ext4_encrypted_follow_link()" in
the merge resolution, to make it clear that that function is _only_
used for encrypted symlinks. The function doesn't actually work for
non-encrypted symlinks at all, and they use the generic helpers
- Linus ]
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (52 commits)
ext4: set lazytime on remount if MS_LAZYTIME is set by mount
ext4: only call ext4_truncate when size <= isize
ext4: make online defrag error reporting consistent
ext4: minor cleanup of ext4_da_reserve_space()
ext4: don't retry file block mapping on bigalloc fs with non-extent file
ext4: prevent ext4_quota_write() from failing due to ENOSPC
ext4: call sync_blockdev() before invalidate_bdev() in put_super()
jbd2: speedup jbd2_journal_dirty_metadata()
jbd2: get rid of open coded allocation retry loop
ext4: improve warning directory handling messages
jbd2: fix ocfs2 corrupt when updating journal superblock fails
ext4: mballoc: avoid 20-argument function call
ext4: wait for existing dio workers in ext4_alloc_file_blocks()
ext4: recalculate journal credits as inode depth changes
jbd2: use GFP_NOFS in jbd2_cleanup_journal_tail()
ext4: use swap() in mext_page_double_lock()
ext4: use swap() in memswap()
ext4: fix race between truncate and __ext4_journalled_writepage()
ext4 crypto: fail the mount if blocksize != pagesize
ext4: Add support FALLOC_FL_INSERT_RANGE for fallocate
...
Newer versions of mount parse the lazytime feature and pass it to the
mount system call via the flags field in the mount system call,
removing the lazytime string from the mount options list. So we need
to check for the presence of MS_LAZYTIME and set it in sb->s_flags in
order for this flag to be set on a remount.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Pull vfs updates from Al Viro:
"In this pile: pathname resolution rewrite.
- recursion in link_path_walk() is gone.
- nesting limits on symlinks are gone (the only limit remaining is
that the total amount of symlinks is no more than 40, no matter how
nested).
- "fast" (inline) symlinks are handled without leaving rcuwalk mode.
- stack footprint (independent of the nesting) is below kilobyte now,
about on par with what it used to be with one level of nested
symlinks and ~2.8 times lower than it used to be in the worst case.
- struct nameidata is entirely private to fs/namei.c now (not even
opaque pointers are being passed around).
- ->follow_link() and ->put_link() calling conventions had been
changed; all in-tree filesystems converted, out-of-tree should be
able to follow reasonably easily.
For out-of-tree conversions, see Documentation/filesystems/porting
for details (and in-tree filesystems for examples of conversion).
That has sat in -next since mid-May, seems to survive all testing
without regressions and merges clean with v4.1"
* 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (131 commits)
turn user_{path_at,path,lpath,path_dir}() into static inlines
namei: move saved_nd pointer into struct nameidata
inline user_path_create()
inline user_path_parent()
namei: trim do_last() arguments
namei: stash dfd and name into nameidata
namei: fold path_cleanup() into terminate_walk()
namei: saner calling conventions for filename_parentat()
namei: saner calling conventions for filename_create()
namei: shift nameidata down into filename_parentat()
namei: make filename_lookup() reject ERR_PTR() passed as name
namei: shift nameidata inside filename_lookup()
namei: move putname() call into filename_lookup()
namei: pass the struct path to store the result down into path_lookupat()
namei: uninline set_root{,_rcu}()
namei: be careful with mountpoint crossings in follow_dotdot_rcu()
Documentation: remove outdated information from automount-support.txt
get rid of assorted nameidata-related debris
lustre: kill unused helper
lustre: kill unused macro (LOOKUP_CONTINUE)
...
At LSF we decided that if we truncate up from isize we shouldn't trim
fallocated blocks that were fallocated with KEEP_SIZE and are past the
new i_size. This patch fixes ext4 to do this.
[ Completely reworked patch so that i_disksize would actually get set
when truncating up. Also reworked the code for handling truncate so
that it's easier to handle. -- tytso ]
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Make the error reporting behavior resulting from the unsupported use
of online defrag on files with data journaling enabled consistent with
that implemented for bigalloc file systems. Difference found with
ext4/308.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove outdated comments and dead code from ext4_da_reserve_space.
Clean up its trace point, and relocate it to make it more useful.
While we're at it, fix a nearby conditional used to determine if
we have a non-bigalloc file system. It doesn't match usage elsewhere
in the code, and misleadingly suggests that an s_cluster_ratio value
of 0 would be legal.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4 isn't willing to map clusters to a non-extent file. Don't signal
this with an out of space error, since the FS will retry the
allocation (which didn't fail) forever. Instead, return EUCLEAN so
that the operation will fail immediately all the way back to userspace.
(The fix is either to run e2fsck -E bmap2extent, or to chattr +e the file.)
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
In order to prevent quota block tracking to be inaccurate when
ext4_quota_write() fails with ENOSPC, we make two changes. The quota
file can now use the reserved block (since the quota file is arguably
file system metadata), and ext4_quota_write() now uses
ext4_should_retry_alloc() to retry the block allocation after a commit
has completed and released some blocks for allocation.
This fixes failures of xfstests generic/270:
Quota error (device vdc): write_blk: dquota write failed
Quota error (device vdc): qtree_write_dquot: Error -28 occurred while creating quota
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Normally all of the buffers will have been forced out to disk before
we call invalidate_bdev(), but there will be some cases, where a file
system operation was aborted due to an ext4_error(), where there may
still be some dirty buffers in the buffer cache for the device. So
try to force them out to memory before calling invalidate_bdev().
This fixes a warning triggered by generic/081:
WARNING: CPU: 1 PID: 3473 at /usr/projects/linux/ext4/fs/block_dev.c:56 __blkdev_put+0xb5/0x16f()
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Several ext4_warning() messages in the directory handling code do not
report the inode number of the (potentially corrupt) directory where a
problem is seen, and others report this in an ad-hoc manner. Add an
ext4_warning_inode() helper to print the inode number and command name
consistent with ext4_error_inode().
Consolidate the place in ext4.h that these macros are defined.
Clean up some other directory error and warning messages to print the
calling function name.
Minor code style fixes in nearby lines.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Making a function call with 20 arguments is rather expensive in both
stack and .text. In this case, doing the formatting manually doesn't
make it any less readable, so we might as well save 155 bytes of .text
and 112 bytes of stack.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Currently existing dio workers can jump in and potentially increase
extent tree depth while we're allocating blocks in
ext4_alloc_file_blocks(). This may cause us to underestimate the
number of credits needed for the transaction because the extent tree
depth can change after our estimation.
Fix this by waiting for all the existing dio workers in the same way
as we do it in ext4_punch_hole. We've seen errors caused by this in
xfstest generic/299, however it's really hard to reproduce.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently in ext4_alloc_file_blocks() the number of credits is
calculated only once before we enter the allocation loop. However within
the allocation loop the extent tree depth can change, hence the number
of credits needed can increase potentially exceeding the number of credits
reserved in the handle which can cause journal failures.
Fix this by recalculating number of credits when the inode depth
changes. Note that even though ext4_alloc_file_blocks() is only
currently used by extent base inodes we will avoid recalculating number
of credits unnecessarily in the case of indirect based inodes.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use kernel.h macro definition.
Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use kernel.h macro definition.
Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The commit cf108bca465d: "ext4: Invert the locking order of page_lock
and transaction start" caused __ext4_journalled_writepage() to drop
the page lock before the page was written back, as part of changing
the locking order to jbd2_journal_start -> page_lock. However, this
introduced a potential race if there was a truncate racing with the
data=journalled writeback mode.
Fix this by grabbing the page lock after starting the journal handle,
and then checking to see if page had gotten truncated out from under
us.
This fixes a number of different warnings or BUG_ON's when running
xfstests generic/086 in data=journalled mode, including:
jbd2_journal_dirty_metadata: vdc-8: bad jh for block 115643: transaction (ee3fe7
c0, 164), jh->b_transaction ( (null), 0), jh->b_next_transaction ( (null), 0), jlist 0
- and -
kernel BUG at /usr/projects/linux/ext4/fs/jbd2/transaction.c:2200!
...
Call Trace:
[<c02b2ded>] ? __ext4_journalled_invalidatepage+0x117/0x117
[<c02b2de5>] __ext4_journalled_invalidatepage+0x10f/0x117
[<c02b2ded>] ? __ext4_journalled_invalidatepage+0x117/0x117
[<c027d883>] ? lock_buffer+0x36/0x36
[<c02b2dfa>] ext4_journalled_invalidatepage+0xd/0x22
[<c0229139>] do_invalidatepage+0x22/0x26
[<c0229198>] truncate_inode_page+0x5b/0x85
[<c022934b>] truncate_inode_pages_range+0x156/0x38c
[<c0229592>] truncate_inode_pages+0x11/0x15
[<c022962d>] truncate_pagecache+0x55/0x71
[<c02b913b>] ext4_setattr+0x4a9/0x560
[<c01ca542>] ? current_kernel_time+0x10/0x44
[<c026c4d8>] notify_change+0x1c7/0x2be
[<c0256a00>] do_truncate+0x65/0x85
[<c0226f31>] ? file_ra_state_init+0x12/0x29
- and -
WARNING: CPU: 1 PID: 1331 at /usr/projects/linux/ext4/fs/jbd2/transaction.c:1396
irty_metadata+0x14a/0x1ae()
...
Call Trace:
[<c01b879f>] ? console_unlock+0x3a1/0x3ce
[<c082cbb4>] dump_stack+0x48/0x60
[<c0178b65>] warn_slowpath_common+0x89/0xa0
[<c02ef2cf>] ? jbd2_journal_dirty_metadata+0x14a/0x1ae
[<c0178bef>] warn_slowpath_null+0x14/0x18
[<c02ef2cf>] jbd2_journal_dirty_metadata+0x14a/0x1ae
[<c02d8615>] __ext4_handle_dirty_metadata+0xd4/0x19d
[<c02b2f44>] write_end_fn+0x40/0x53
[<c02b4a16>] ext4_walk_page_buffers+0x4e/0x6a
[<c02b59e7>] ext4_writepage+0x354/0x3b8
[<c02b2f04>] ? mpage_release_unused_pages+0xd4/0xd4
[<c02b1b21>] ? wait_on_buffer+0x2c/0x2c
[<c02b5a4b>] ? ext4_writepage+0x3b8/0x3b8
[<c02b5a5b>] __writepage+0x10/0x2e
[<c0225956>] write_cache_pages+0x22d/0x32c
[<c02b5a4b>] ? ext4_writepage+0x3b8/0x3b8
[<c02b6ee8>] ext4_writepages+0x102/0x607
[<c019adfe>] ? sched_clock_local+0x10/0x10e
[<c01a8a7c>] ? __lock_is_held+0x2e/0x44
[<c01a8ad5>] ? lock_is_held+0x43/0x51
[<c0226dff>] do_writepages+0x1c/0x29
[<c0276bed>] __writeback_single_inode+0xc3/0x545
[<c0277c07>] writeback_sb_inodes+0x21f/0x36d
...
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
We currently don't correctly handle the case where blocksize !=
pagesize, so disallow the mount in those cases.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch implements fallocate's FALLOC_FL_INSERT_RANGE for Ext4.
1) Make sure that both offset and len are block size aligned.
2) Update the i_size of inode by len bytes.
3) Compute the file's logical block number against offset. If the computed
block number is not the starting block of the extent, split the extent
such that the block number is the starting block of the extent.
4) Shift all the extents which are lying between [offset, last allocated extent]
towards right by len bytes. This step will make a hole of len bytes
at offset.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
[ Added another sparse fix for EXT4_IOC_GET_ENCRYPTION_POLICY while
we're at it. --tytso ]
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
During a source code review of fs/ext4/extents.c I noted identical
consecutive lines. An assertion is repeated for inode1 and never done
for inode2. This is not in keeping with the rest of the code in the
ext4_swap_extents function and appears to be a bug.
Assert that the inode2 mutex is not locked.
Signed-off-by: David Moore <dmoorefo@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Currently ext4_mb_good_group() only returns 0 or 1 depending on whether
the allocation group is suitable for use or not. However we might get
various errors and fail while initializing new group including -EIO
which would never get propagated up the call chain. This might lead to
an endless loop at writeback when we're trying to find a good group to
allocate from and we fail to initialize new group (read error for
example).
Fix this by returning proper error code from ext4_mb_good_group() and
using it in ext4_mb_regular_allocator(). In ext4_mb_regular_allocator()
we will always return only the first occurred error from
ext4_mb_good_group() and we only propagate it back to the caller if we
do not get any other errors and we fail to allocate any blocks.
Note that with other modes than errors=continue, we will fail
immediately in ext4_mb_good_group() in case of error, however with
errors=continue we should try to continue using the file system, that's
why we're not going to fail immediately when we see an error from
ext4_mb_good_group(), but rather when we fail to find a suitable block
group to allocate from due to an problem in group initialization.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Currently on the machines with page size > block size when initializing
block group buddy cache we initialize it for all the block group bitmaps
in the page. However in the case of read error, checksum error, or if
a single bitmap is in any way corrupted we would fail to initialize all
of the bitmaps. This is problematic because we will not have access to
the other allocation groups even though those might be perfectly fine
and usable.
Fix this by reading all the bitmaps instead of error out on the first
problem and simply skip the bitmaps which were either not read properly,
or are not valid.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we want to rely on the buffer_verified() flag of the block bitmap
buffer, we have to set it consistently. However currently if we're
initializing uninitialized block bitmap in
ext4_read_block_bitmap_nowait() we're not going to set buffer verified
at all.
We can do this by simply setting the flag on the buffer, but I think
it's actually better to run ext4_validate_block_bitmap() to make sure
that what we did in the ext4_init_block_bitmap() is right.
So run ext4_validate_block_bitmap() even after the block bitmap
initialization. Also bail out early from ext4_validate_block_bitmap() if
we see corrupt bitmap, since we already know it's corrupt and we do not
need to verify that.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
dax_fault() currently relies on the get_block callback to attach an
io completion callback to the mapping buffer head so that it can
run unwritten extent conversion after zeroing allocated blocks.
Instead of this hack, pass the conversion callback directly into
dax_fault() similar to the get_block callback. When the filesystem
allocates unwritten extents, it will set the buffer_unwritten()
flag, and hence the dax_fault code can call the completion function
in the contexts where it is necessary without overloading the
mapping buffer head.
Note: The changes to ext4 to use this interface are suspect at best.
In fact, the way ext4 did this end_io assignment in the first place
looks suspect because it only set a completion callback when there
wasn't already some other write() call taking place on the same
inode. The ext4 end_io code looks rather intricate and fragile with
all it's reference counting and passing to different contexts for
modification via inode private pointers that aren't protected by
locks...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Previously we allocated bounce pages using a combination of
alloc_page() and mempool_alloc() with the __GFP_WAIT bit set.
Instead, use mempool_alloc() with GFP_NOWAIT. The mempool_alloc()
function will try using alloc_pages() initially, and then only use the
mempool reserve of pages if alloc_pages() is unable to fulfill the
request.
This minimizes the the impact on the mm layer when we need to do a
large amount of writeback of encrypted files, as Jaeguk Kim had
reported that under a heavy fio workload on a system with restricted
amounts memory (which unfortunately, includes many mobile handsets),
he had observed the the OOM killer getting triggered several times.
Using GFP_NOWAIT
If the mempool_alloc() function fails, we will retry the page
writeback at a later time; the function of the mempool is to ensure
that we can writeback at least 32 pages at a time, so we can more
efficiently dispatch I/O under high memory pressure situations. In
the future we should make this be a tunable so we can determine the
best tradeoff between permanently sequestering memory and the ability
to quickly launder pages so we can free up memory quickly when
necessary.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
With the planned cgroup writeback support, backing-dev related
declarations will be more widely used across block and cgroup;
unfortunately, including backing-dev.h from include/linux/blkdev.h
makes cyclic include dependency quite likely.
This patch separates out backing-dev-defs.h which only has the
essential definitions and updates blkdev.h to include it. c files
which need access to more backing-dev details now include
backing-dev.h directly. This takes backing-dev.h off the common
include dependency chain making it a lot easier to use it across block
and cgroup.
v2: fs/fat build failure fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@fb.com>
Crypto resource should be released when ext4 module exits, otherwise
it will cause memory leak.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously we were taking the required padding when allocating space
for the on-disk symlink. This caused a buffer overrun which could
trigger a krenel crash when running fsstress.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix a potential memory leak where fname->crypto_buf.name wouldn't get
freed in some error paths, and also make the error handling easier to
understand/audit.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out calls to ext4_inherit_context() and move them to
__ext4_new_inode(); this fixes a problem where ext4_tmpfile() wasn't
calling calling ext4_inherit_context(), so the temporary file wasn't
getting protected. Since the blocks for the tmpfile could end up on
disk, they really should be protected if the tmpfile is created within
the context of an encrypted directory.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Set up the encryption information for newly created inodes immediately
after they inherit their encryption context from their parent
directories.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_encrypted_zeroout() could end up leaking a bio and bounce page.
Fortunately it's not used much. While we're fixing things up,
refactor out common code into the static function alloc_bounce_page()
and fix up error handling if mempool_alloc() fails.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As suggested by Herbert Xu, we shouldn't allocate a new tfm each time
we read or write a page. Instead we can use a single tfm hanging off
the inode's crypt_info structure for all of our encryption needs for
that inode, since the tfm can be used by multiple crypto requests in
parallel.
Also use cmpxchg() to avoid races that could result in crypt_info
structure getting doubly allocated or doubly freed.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
On arm64 this is apparently needed for CTS mode to function correctly.
Otherwise attempts to use CTS return ENOENT.
Change-Id: I732ea9a5157acc76de5b89edec195d0365f4ca63
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Some fields are only used when the crypto_ctx is being used on the
read path, some are only used on the write path, and some are only
used when the structure is on free list. Optimize memory use by using
a union.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since the big barrier rewrite/removal in 2007 we never fail FLUSH or
FUA requests, which means we can remove the magic BIO_EOPNOTSUPP flag
to help propagating those to the buffer_head layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Use slab caches the ext4_crypto_ctx and ext4_crypt_info structures for
slighly better memory efficiency and debuggability.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The superblock fields s_file_encryption_mode and s_dir_encryption_mode
are vestigal, so remove them as a cleanup. While we're at it, allow
file systems with both encryption and inline_data enabled at the same
time to work correctly. We can't have encrypted inodes with inline
data, but there's no reason to prohibit unencrypted inodes from using
the inline data feature.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This is a pretty massive patch which does a number of different things:
1) The per-inode encryption information is now stored in an allocated
data structure, ext4_crypt_info, instead of directly in the node.
This reduces the size usage of an in-memory inode when it is not
using encryption.
2) We drop the ext4_fname_crypto_ctx entirely, and use the per-inode
encryption structure instead. This remove an unnecessary memory
allocation and free for the fname_crypto_ctx as well as allowing us
to reuse the ctfm in a directory for multiple lookups and file
creations.
3) We also cache the inode's policy information in the ext4_crypt_info
structure so we don't have to continually read it out of the
extended attributes.
4) We now keep the keyring key in the inode's encryption structure
instead of releasing it after we are done using it to derive the
per-inode key. This allows us to test to see if the key has been
revoked; if it has, we prevent the use of the derived key and free
it.
5) When an inode is released (or when the derived key is freed), we
will use memset_explicit() to zero out the derived key, so it's not
left hanging around in memory. This implies that when a user logs
out, it is important to first revoke the key, and then unlink it,
and then finally, to use "echo 3 > /proc/sys/vm/drop_caches" to
release any decrypted pages and dcache entries from the system
caches.
6) All this, and we also shrink the number of lines of code by around
100. :-)
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use struct ext4_encryption_key only for the master key passed via the
kernel keyring.
For internal kernel space users, we now use struct ext4_crypt_info.
This will allow us to put information from the policy structure so we
can cache it and avoid needing to constantly looking up the extended
attribute. We will do this in a spearate patch. This patch is mostly
mechnical to make it easier for patch review.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Encrypt the filename as soon it is passed in by the user. This avoids
our needing to encrypt the filename 2 or 3 times while in the process
of creating a filename.
Similarly, when looking up a directory entry, encrypt the filename
early, or if the encryption key is not available, base-64 decode the
file syystem so that the hash value and the last 16 bytes of the
encrypted filename is available in the new struct ext4_filename data
structure.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The xfstests test suite assumes that an attempt to collapse range on
the range (0, 1) will return EOPNOTSUPP if the file system does not
support collapse range. Commit 280227a75b56: "ext4: move check under
lock scope to close a race" broke this, and this caused xfstests to
fail when run when testing file systems that did not have the extents
feature enabled.
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The following commit introduced a bug when checking for zero length extent
5946d08 ext4: check for overlapping extents in ext4_valid_extent_entries()
Zero length extent could pass the check if lblock is zero.
Adding the explicit check for zero length back.
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Currently when journal restart fails, we'll have the h_transaction of
the handle set to NULL to indicate that the handle has been effectively
aborted. We handle this situation quietly in the jbd2_journal_stop() and just
free the handle and exit because everything else has been done before we
attempted (and failed) to restart the journal.
Unfortunately there are a number of problems with that approach
introduced with commit
41a5b91319 "jbd2: invalidate handle if jbd2_journal_restart()
fails"
First of all in ext4 jbd2_journal_stop() will be called through
__ext4_journal_stop() where we would try to get a hold of the superblock
by dereferencing h_transaction which in this case would lead to NULL
pointer dereference and crash.
In addition we're going to free the handle regardless of the refcount
which is bad as well, because others up the call chain will still
reference the handle so we might potentially reference already freed
memory.
Moreover it's expected that we'll get aborted handle as well as detached
handle in some of the journalling function as the error propagates up
the stack, so it's unnecessary to call WARN_ON every time we get
detached handle.
And finally we might leak some memory by forgetting to free reserved
handle in jbd2_journal_stop() in the case where handle was detached from
the transaction (h_transaction is NULL).
Fix the NULL pointer dereference in __ext4_journal_stop() by just
calling jbd2_journal_stop() quietly as suggested by Jan Kara. Also fix
the potential memory leak in jbd2_journal_stop() and use proper
handle refcounting before we attempt to free it to avoid use-after-free
issues.
And finally remove all WARN_ON(!transaction) from the code so that we do
not get random traces when something goes wrong because when journal
restart fails we will get to some of those functions.
Cc: stable@vger.kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
The ext4_extent_tree_init() function hasn't been in the ext4 code for
a long time ago, except in an unused function prototype in ext4.h
Google-Bug-Id: 4530137
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We had a fencepost error in the lazytime optimization which means that
timestamp would get written to the wrong inode.
Cc: stable@vger.kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
a) instead of storing the symlink body (via nd_set_link()) and returning
an opaque pointer later passed to ->put_link(), ->follow_link() _stores_
that opaque pointer (into void * passed by address by caller) and returns
the symlink body. Returning ERR_PTR() on error, NULL on jump (procfs magic
symlinks) and pointer to symlink body for normal symlinks. Stored pointer
is ignored in all cases except the last one.
Storing NULL for opaque pointer (or not storing it at all) means no call
of ->put_link().
b) the body used to be passed to ->put_link() implicitly (via nameidata).
Now only the opaque pointer is. In the cases when we used the symlink body
to free stuff, ->follow_link() now should store it as opaque pointer in addition
to returning it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
for ext4 encryption which provide better security and performance.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVRsVDAAoJEPL5WVaVDYGj/UUIAI6zLGhq3I8uQLZQC22Ew2Ph
TPj6eABDuTrB/7QpAu21Dk59N70MQpsBTES6yLWWLf/eHp0gsH7gCNY/C9185vOh
tQjzw18hRH2IfPftOBrjDlPGbbBD8Gu9jAmpm5kKKOtBuSVbKQ4GeN6BTECkgwlg
U5EJHJJ5Ahl4MalODFreOE5ZrVC7FWGEpc1y/MquQ0qcGSGlNd35leK5FE2bfHWZ
M1IJfXH5RRVPUBp26uNvzEg0TtpqkigmCJUT6gOVLfSYBw+lYEbGl4lCflrJmbgt
8EZh3Q0plsDbNhMzqSvOE4RvsOZ28oMjRNbzxkAaoz/FlatWX2hrfAoI2nqRrKg=
=Unbp
-----END PGP SIGNATURE-----
Merge tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Some miscellaneous bug fixes and some final on-disk and ABI changes
for ext4 encryption which provide better security and performance"
* tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix growing of tiny filesystems
ext4: move check under lock scope to close a race.
ext4: fix data corruption caused by unwritten and delayed extents
ext4 crypto: remove duplicated encryption mode definitions
ext4 crypto: do not select from EXT4_FS_ENCRYPTION
ext4 crypto: add padding to filenames before encrypting
ext4 crypto: simplify and speed up filename encryption
The estimate of necessary transaction credits in ext4_flex_group_add()
is too pessimistic. It reserves credit for sb, resize inode, and resize
inode dindirect block for each group added in a flex group although they
are always the same block and thus it is enough to account them only
once. Also the number of modified GDT block is overestimated since we
fit EXT4_DESC_PER_BLOCK(sb) descriptors in one block.
Make the estimation more precise. That reduces number of requested
credits enough that we can grow 20 MB filesystem (which has 1 MB
journal, 79 reserved GDT blocks, and flex group size 16 by default).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
fallocate() checks that the file is extent-based and returns
EOPNOTSUPP in case is not. Other tasks can convert from and to
indirect and extent so it's safe to check only after grabbing
the inode mutex.
Signed-off-by: Davide Italiano <dccitaliano@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Currently it is possible to lose whole file system block worth of data
when we hit the specific interaction with unwritten and delayed extents
in status extent tree.
The problem is that when we insert delayed extent into extent status
tree the only way to get rid of it is when we write out delayed buffer.
However there is a limitation in the extent status tree implementation
so that when inserting unwritten extent should there be even a single
delayed block the whole unwritten extent would be marked as delayed.
At this point, there is no way to get rid of the delayed extents,
because there are no delayed buffers to write out. So when a we write
into said unwritten extent we will convert it to written, but it still
remains delayed.
When we try to write into that block later ext4_da_map_blocks() will set
the buffer new and delayed and map it to invalid block which causes
the rest of the block to be zeroed loosing already written data.
For now we can fix this by simply not allowing to set delayed status on
written extent in the extent status tree. Also add WARN_ON() to make
sure that we notice if this happens in the future.
This problem can be easily reproduced by running the following xfs_io.
xfs_io -f -c "pwrite -S 0xaa 4096 2048" \
-c "falloc 0 131072" \
-c "pwrite -S 0xbb 65536 2048" \
-c "fsync" /mnt/test/fff
echo 3 > /proc/sys/vm/drop_caches
xfs_io -c "pwrite -S 0xdd 67584 2048" /mnt/test/fff
This can be theoretically also reproduced by at random by running fsx,
but it's not very reliable, though on machines with bigger page size
(like ppc) this can be seen more often (especially xfstest generic/127)
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
This patch removes duplicated encryption modes which were already in
ext4.h. They were duplicated from commit 3edc18d and commit f542fb.
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Michael Halcrow <mhalcrow@google.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds a tristate EXT4_ENCRYPTION to do the selections
for EXT4_FS_ENCRYPTION because selecting from a bool causes all
the selected options to be built-in, even if EXT4 itself is a
module.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This obscures the length of the filenames, to decrease the amount of
information leakage. By default, we pad the filenames to the next 4
byte boundaries. This costs nothing, since the directory entries are
aligned to 4 byte boundaries anyway. Filenames can also be padded to
8, 16, or 32 bytes, which will consume more directory space.
Change-Id: Ibb7a0fb76d2c48e2061240a709358ff40b14f322
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Avoid using SHA-1 when calculating the user-visible filename when the
encryption key is available, and avoid decrypting lots of filenames
when searching for a directory entry in a directory block.
Change-Id: If4655f144784978ba0305b597bfa1c8d7bb69e63
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull fourth vfs update from Al Viro:
"d_inode() annotations from David Howells (sat in for-next since before
the beginning of merge window) + four assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RCU pathwalk breakage when running into a symlink overmounting something
fix I_DIO_WAKEUP definition
direct-io: only inc/dec inode->i_dio_count for file systems
fs/9p: fix readdir()
VFS: assorted d_backing_inode() annotations
VFS: fs/inode.c helpers: d_inode() annotations
VFS: fs/cachefiles: d_backing_inode() annotations
VFS: fs library helpers: d_inode() annotations
VFS: assorted weird filesystems: d_inode() annotations
VFS: normal filesystems (and lustre): d_inode() annotations
VFS: security/: d_inode() annotations
VFS: security/: d_backing_inode() annotations
VFS: net/: d_inode() annotations
VFS: net/unix: d_backing_inode() annotations
VFS: kernel/: d_inode() annotations
VFS: audit: d_backing_inode() annotations
VFS: Fix up some ->d_inode accesses in the chelsio driver
VFS: Cachefiles should perform fs modifications on the top layer only
VFS: AF_UNIX sockets should call mknod on the top layer only
do_blockdev_direct_IO() increments and decrements the inode
->i_dio_count for each IO operation. It does this to protect against
truncate of a file. Block devices don't need this sort of protection.
For a capable multiqueue setup, this atomic int is the only shared
state between applications accessing the device for O_DIRECT, and it
presents a scaling wall for that. In my testing, as much as 30% of
system time is spent incrementing and decrementing this value. A mixed
read/write workload improved from ~2.5M IOPS to ~9.6M IOPS, with
better latencies too. Before:
clat percentiles (usec):
| 1.00th=[ 33], 5.00th=[ 34], 10.00th=[ 34], 20.00th=[ 34],
| 30.00th=[ 34], 40.00th=[ 34], 50.00th=[ 35], 60.00th=[ 35],
| 70.00th=[ 35], 80.00th=[ 35], 90.00th=[ 37], 95.00th=[ 80],
| 99.00th=[ 98], 99.50th=[ 151], 99.90th=[ 155], 99.95th=[ 155],
| 99.99th=[ 165]
After:
clat percentiles (usec):
| 1.00th=[ 95], 5.00th=[ 108], 10.00th=[ 129], 20.00th=[ 149],
| 30.00th=[ 155], 40.00th=[ 161], 50.00th=[ 167], 60.00th=[ 171],
| 70.00th=[ 177], 80.00th=[ 185], 90.00th=[ 201], 95.00th=[ 270],
| 99.00th=[ 390], 99.50th=[ 398], 99.90th=[ 418], 99.95th=[ 422],
| 99.99th=[ 438]
In other setups, Robert Elliott reported seeing good performance
improvements:
https://lkml.org/lkml/2015/4/3/557
The more applications accessing the device, the worse it gets.
Add a new direct-io flags, DIO_SKIP_DIO_COUNT, which tells
do_blockdev_direct_IO() that it need not worry about incrementing
or decrementing the inode i_dio_count for this caller.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Elliott, Robert (Server Storage) <elliott@hp.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull third hunk of vfs changes from Al Viro:
"This contains the ->direct_IO() changes from Omar + saner
generic_write_checks() + dealing with fcntl()/{read,write}() races
(mirroring O_APPEND/O_DIRECT into iocb->ki_flags and instead of
repeatedly looking at ->f_flags, which can be changed by fcntl(2),
check ->ki_flags - which cannot) + infrastructure bits for dhowells'
d_inode annotations + Christophs switch of /dev/loop to
vfs_iter_write()"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (30 commits)
block: loop: switch to VFS ITER_BVEC
configfs: Fix inconsistent use of file_inode() vs file->f_path.dentry->d_inode
VFS: Make pathwalk use d_is_reg() rather than S_ISREG()
VFS: Fix up debugfs to use d_is_dir() in place of S_ISDIR()
VFS: Combine inode checks with d_is_negative() and d_is_positive() in pathwalk
NFS: Don't use d_inode as a variable name
VFS: Impose ordering on accesses of d_inode and d_flags
VFS: Add owner-filesystem positive/negative dentry checks
nfs: generic_write_checks() shouldn't be done on swapout...
ocfs2: use __generic_file_write_iter()
mirror O_APPEND and O_DIRECT into iocb->ki_flags
switch generic_write_checks() to iocb and iter
ocfs2: move generic_write_checks() before the alignment checks
ocfs2_file_write_iter: stop messing with ppos
udf_file_write_iter: reorder and simplify
fuse: ->direct_IO() doesn't need generic_write_checks()
ext4_file_write_iter: move generic_write_checks() up
xfs_file_aio_write_checks: switch to iocb/iov_iter
generic_write_checks(): drop isblk argument
blkdev_write_iter: expand generic_file_checks() call in there
...
Pull quota and udf updates from Jan Kara:
"The pull contains quota changes which complete unification of XFS and
VFS quota interfaces (so tools can use either interface to manipulate
any filesystem). There's also a patch to support project quotas in
VFS quota subsystem from Li Xi.
Finally there's a bunch of UDF fixes and cleanups and tiny cleanup in
reiserfs & ext3"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (21 commits)
udf: Update ctime and mtime when directory is modified
udf: return correct errno for udf_update_inode()
ext3: Remove useless condition in if statement.
vfs: Add general support to enforce project quota limits
reiserfs: fix __RASSERT format string
udf: use int for allocated blocks instead of sector_t
udf: remove redundant buffer_head.h includes
udf: remove else after return in __load_block_bitmap()
udf: remove unused variable in udf_table_free_blocks()
quota: Fix maximum quota limit settings
quota: reorder flags in quota state
quota: paranoia: check quota tree root
quota: optimize i_dquot access
quota: Hook up Q_XSETQLIM for id 0 to ->set_info
xfs: Add support for Q_SETINFO
quota: Make ->set_info use structure with neccesary info to VFS and XFS
quota: Remove ->get_xstate and ->get_xstatev callbacks
gfs2: Convert to using ->get_state callback
xfs: Convert to using ->get_state callback
quota: Wire up Q_GETXSTATE and Q_GETXSTATV calls to work with ->get_state
...
Also add the test dummy encryption mode flag so we can more easily
test the encryption patches using xfstests.
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Merge second patchbomb from Andrew Morton:
- the rest of MM
- various misc bits
- add ability to run /sbin/reboot at reboot time
- printk/vsprintf changes
- fiddle with seq_printf() return value
* akpm: (114 commits)
parisc: remove use of seq_printf return value
lru_cache: remove use of seq_printf return value
tracing: remove use of seq_printf return value
cgroup: remove use of seq_printf return value
proc: remove use of seq_printf return value
s390: remove use of seq_printf return value
cris fasttimer: remove use of seq_printf return value
cris: remove use of seq_printf return value
openrisc: remove use of seq_printf return value
ARM: plat-pxa: remove use of seq_printf return value
nios2: cpuinfo: remove use of seq_printf return value
microblaze: mb: remove use of seq_printf return value
ipc: remove use of seq_printf return value
rtc: remove use of seq_printf return value
power: wakeup: remove use of seq_printf return value
x86: mtrr: if: remove use of seq_printf return value
linux/bitmap.h: improve BITMAP_{LAST,FIRST}_WORD_MASK
MAINTAINERS: CREDITS: remove Stefano Brivio from B43
.mailmap: add Ricardo Ribalda
CREDITS: add Ricardo Ribalda Delgado
...
The original dax patchset split the ext2/4_file_operations because of the
two NULL splice_read/splice_write in the dax case.
In the vfs if splice_read/splice_write are NULL we then call
default_splice_read/write.
What we do here is make generic_file_splice_read aware of IS_DAX() so the
original ext2/4_file_operations can be used as is.
For write it appears that iter_file_splice_write is just fine. It uses
the regular f_op->write(file,..) or new_sync_write(file, ...).
Signed-off-by: Boaz Harrosh <boaz@plexistor.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
From: Yigal Korman <yigal@plexistor.com>
[v1]
Without this patch, c/mtime is not updated correctly when mmap'ed page is
first read from and then written to.
A new xfstest is submitted for testing this (generic/080)
[v2]
Jan Kara has pointed out that if we add the
sb_start/end_pagefault pair in the new pfn_mkwrite we
are then fixing another bug where: A user could start
writing to the page while filesystem is frozen.
Signed-off-by: Yigal Korman <yigal@plexistor.com>
Signed-off-by: Boaz Harrosh <boaz@plexistor.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Modifies htree_dirblock_to_tree, dx_make_map, ext4_match search_dir,
and ext4_find_dest_de to support fname crypto. Filename encryption
feature is not yet enabled at this patch.
Signed-off-by: Uday Savagaonkar <savagaon@google.com>
Signed-off-by: Ildar Muslukhov <ildarm@google.com>
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For encrypted directories, we need to pass in a separate parameter for
the decrypted filename, since the directory entry contains the
encrypted filename.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pulls block_write_begin() into fs/ext4/inode.c because it might need
to do a low-level read of the existing data, in which case we need to
decrypt it.
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Ildar Muslukhov <ildarm@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Enforce the following inheritance policy:
1) An unencrypted directory may contain encrypted or unencrypted files
or directories.
2) All files or directories in a directory must be protected using the
same key as their containing directory.
As a result, assuming the following setup:
mke2fs -t ext4 -Fq -O encrypt /dev/vdc
mount -t ext4 /dev/vdc /vdc
mkdir /vdc/a /vdc/b /vdc/c
echo foo | e4crypt add_key /vdc/a
echo bar | e4crypt add_key /vdc/b
for i in a b c ; do cp /etc/motd /vdc/$i/motd-$i ; done
Then we will see the following results:
cd /vdc
mv a b # will fail; /vdc/a and /vdc/b have different keys
mv b/motd-b a # will fail, see above
ln a/motd-a b # will fail, see above
mv c a # will fail; all inodes in an encrypted directory
# must be encrypted
ln c/motd-c b # will fail, see above
mv a/motd-a c # will succeed
mv c/motd-a a # will succeed
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
On encrypt, we will re-assign the buffer_heads to point to a bounce
page rather than the control_page (which is the original page to write
that contains the plaintext). The block I/O occurs against the bounce
page. On write completion, we re-assign the buffer_heads to the
original plaintext page.
On decrypt, we will attach a read completion callback to the bio
struct. This read completion will decrypt the read contents in-place
prior to setting the page up-to-date.
The current encryption mode, AES-256-XTS, lacks cryptographic
integrity. AES-256-GCM is in-plan, but we will need to devise a
mechanism for handling the integrity data.
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Ildar Muslukhov <ildarm@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
... returning -E... upon error and amount of data left in iter after
(possible) truncation upon success. Note, that normal case gives
a non-zero (positive) return value, so any tests for != 0 _must_ be
updated.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Conflicts:
fs/ext4/file.c
The rw parameter to direct_IO is redundant with iov_iter->type, and
treated slightly differently just about everywhere it's used: some users
do rw & WRITE, and others do rw == WRITE where they should be doing a
bitwise check. Simplify this with the new iov_iter_rw() helper, which
always returns either READ or WRITE.
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Most filesystems call through to these at some point, so we'll start
here.
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All places outside of core VFS that checked ->read and ->write for being NULL or
called the methods directly are gone now, so NULL {read,write} with non-NULL
{read,write}_iter will do the right thing in all cases.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro