Commit Graph

109 Commits

Author SHA1 Message Date
Bryan Schumaker 89d77c8fa8 NFS: Convert v4 into a module
This patch exports symbols needed by the v4 module.  In addition, I also
switch over to using IS_ENABLED() to check if CONFIG_NFS_V4 or
CONFIG_NFS_V4_MODULE are set.

The module (nfs4.ko) will be created in the same directory as nfs.ko and
will be automatically loaded the first time you try to mount over NFS v4.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30 19:06:52 -04:00
Andy Adamson 293b3b065c NFSv4.1 do not send LAYOUTRETURN on emtpy plh_segs list
mark_matching_lsegs_invalid() resets the mds_threshold counters and can
dereference the layout hdr on an initial empty plh_segs list. It returns 0 both
in the case of an initial empty list and in a non-emtpy list that was cleared
by calls to mark_lseg_invalid.

Don't send a LAYOUTRETURN if the list was initially empty.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-16 14:39:00 -04:00
Andy Adamson 366d50521c NFSv4.1 mark layout when already returned
When the file layout driver is fencing a DS, _pnfs_return_layout can be
called mulitple times per inode due to in-flight i/o referencing lsegs on it's
plh_segs list.

Remember that LAYOUTRETURN has been called, and do not call it again.
Allow LAYOUTRETURNs after a subsequent LAYOUTGET.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-16 14:37:25 -04:00
Bryan Schumaker 57208fa7e5 NFS: Create an write_pageio_init() function
pNFS needs to select a write function based on the layout driver
currently in use, so I let each NFS version decide how to best handle
initializing writes.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-29 11:46:46 -04:00
Bryan Schumaker 1abb50886a NFS: Create an read_pageio_init() function
pNFS needs to select a read function based on the layout driver
currently in use, so I let each NFS version decide how to best handle
initializing reads.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-29 11:46:46 -04:00
Trond Myklebust 0a9c63fae7 NFSv4.1: Fix a race in set_pnfs_layoutdriver
The call to try_module_get() dereferences ld_type outside the
spin locks, which means that it may be pointing to garbage if
a module unload was in progress.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-19 13:32:45 -04:00
Trond Myklebust 2a4c8994ee NFSv4.1: Fix umount when filelayout DS is also the MDS
Currently there is a 'chicken and egg' issue when the DS is also the mounted
MDS. The nfs_match_client() reference from nfs4_set_ds_client bumps the
cl_count, the nfs_client is not freed at umount, and nfs4_deviceid_purge_client
is not called to dereference the MDS usage of a deviceid which holds a
reference to the DS nfs_client.  The result is the umount program returns,
but the nfs_client is not freed, and the cl_session hearbeat continues.

The MDS (and all other nfs mounts) lose their last nfs_client reference in
nfs_free_server when the last nfs_server (fsid) is umounted.
The file layout DS lose their last nfs_client reference in destroy_ds
when the last deviceid referencing the data server is put and destroy_ds is
called. This is triggered by a call to nfs4_deviceid_purge_client which
removes references to a pNFS deviceid used by an MDS mount.

The fix is to track how many pnfs enabled filesystems are mounted from
this server, and then to purge the device id cache once that count reaches
zero.

Reported-by: Jorge Mora <Jorge.Mora@netapp.com>
Reported-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-18 08:45:16 -04:00
Andy Adamson d23d61c8d3 NFSv4.1 test the mdsthreshold hint parameters
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-24 16:15:49 -04:00
Andy Adamson 2701d086db NFSv4.1 add nfs_inode book keeping for mdsthreshold
Keep track of the number of bytes read or written via buffered, direct, and
mem-mapped i/o for use by mdsthreshold size_io hints.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-24 16:15:48 -04:00
Andy Adamson 82be417aa3 NFSv4.1 cache mdsthreshold values on OPEN
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-24 16:15:48 -04:00
Andy Adamson 041245c88a NFSv4.1 resend LAYOUTGET on data server invalid layout errors
The "invalid layout" class of errors is handled by destroying the layout and
getting a new layout from the server.  Currently, the layout must be
destroyed before a new layout can be obtained.

This means that all references (e.g.lsegs) to the "to be destroyed" layout
header must be dropped before it can be destroyed. This in turn means waiting
for all in flight RPC's using the old layout as well as draining the data
server session slot table wait queue.

Set the NFS_LAYOUT_INVALID flag to redirect I/O to the MDS while waiting for
the old layout to be destroyed.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-19 17:55:33 -04:00
Andy Adamson 0a57cdac3f NFSv4.1 send layoutreturn to fence disconnected data server
Let the MDS know that you are redirecting I/O from pNFS to MDS.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-19 17:55:31 -04:00
Andy Adamson e7dd79af01 NFSv4.1: mark deviceid invalid on filelayout DS connection errors
This prevents the use of any layout for i/o that references the deviceid.
I/O is redirected through the MDS.

Redirect the unhandled failed I/O to the MDS without marking either the
layout or the deviceid invalid.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-19 17:54:20 -04:00
Trond Myklebust 25b11dcdbf NFS: Clean up nfs read and write error paths
Move the error handling for nfs_generic_pagein() into a single function.
Ditto for nfs_generic_flush().

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>
2012-05-01 13:48:13 -04:00
Trond Myklebust 9b5415b536 NFS: Fix a use-before-initialised warning in fs/nfs/write.c and fs/nfs/pnfs.c
If the allocation of nfs_write_header fails, the list of nfs_pages that
needs to be cleaned up is still on desc->pg_list...

Reported-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Fred Isaman <iisaman@netapp.com>
2012-04-27 15:03:51 -04:00
Fred Isaman 1825a0d08f NFS: prepare coalesce testing for directio
The coalesce code made assumptions that will no longer be true once
non-page aligned io occurs.  This introduces no change in
current behavior, but allows for more general situations to come.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-27 14:10:38 -04:00
Fred Isaman 061ae2edb7 NFS: create completion structure to pass into page_init functions
Factors out the code that will need to change when directio
starts using these code paths.  This will allow directio to use
the generic pagein and flush routines

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-27 14:10:38 -04:00
Fred Isaman 6c75dc0d49 NFS: merge _full and _partial write rpc_ops
Decouple nfs_pgio_header and nfs_write_data, and have (possibly
multiple) nfs_write_datas each take a refcount on nfs_pgio_header.

For the moment keeps nfs_write_header as a way to preallocate a single
nfs_write_data with the nfs_pgio_header.  The code doesn't need this,
and would be prettier without, but given the amount of churn I am
already introducing I didn't want to play with tuning new mempools.

This also fixes bug in pnfs_ld_handle_write_error.  In the case of
desc->pg_bsize < PAGE_CACHE_SIZE, the pages list was empty, causing
replay attempt to do nothing.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-27 14:10:37 -04:00
Fred Isaman 4db6e0b74c NFS: merge _full and _partial read rpc_ops
Decouple nfs_pgio_header and nfs_read_data, and have (possibly
multiple) nfs_read_datas each take a refcount on nfs_pgio_header.

For the moment keeps nfs_read_header as a way to preallocate a single
nfs_read_data with the nfs_pgio_header.  The code doesn't need this,
and would be prettier without, but given the amount of churn I am
already introducing I didn't want to play with tuning new mempools.

This also fixes bug in pnfs_ld_handle_read_error.  In the case of
desc->pg_bsize < PAGE_CACHE_SIZE, the pages list was empty, causing
replay attempt to do nothing.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-27 14:10:37 -04:00
Fred Isaman cd841605f7 NFS: create common nfs_pgio_header for both read and write
In order to avoid duplicating all the data in nfs_read_data whenever we
split it up into multiple RPC calls (either due to a short read result
or due to rsize < PAGE_SIZE), we split out the bits that are the same
per RPC call into a separate "header" structure.

The goal this patch moves towards is to have a single header
refcounted by several rpc_data structures.  Thus, want to always refer
from rpc_data to the header, and not the other way.  This patch comes
close to that ideal, but the directio code currently needs some
special casing, isolated in the nfs_direct_[read_write]hdr_release()
functions.  This will be dealt with in a future patch.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-27 14:10:37 -04:00
Fred Isaman 1acbbb4e16 NFS4.1: make pnfs_ld_[read|write]_done consistent
The two functions had diverged quite a bit, with the write function
being a bit more robust than the read.

However, these still break badly in the desc->pg_bsize < PAGE_CACHE_SIZE case,
as then there is nothing hanging on the data->pages list, and the resend
ends up doing nothing.  This will be fixed in a patch later in the series.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-27 14:10:36 -04:00
Andy Adamson e5265a0c58 NFSv4.1 fix page number calculation bug for filelayout decode buffers
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-26 12:23:23 -04:00
Trond Myklebust 8dd3775889 NFSv4.1: Clean ups and bugfixes for the pNFS read/writeback/commit code
Move more pnfs-isms out of the generic commit code.

Bugfixes:

- filelayout_scan_commit_lists doesn't need to get/put the lseg.
  In fact since it is run under the inode->i_lock, the lseg_put()
  can deadlock.

- Ensure that we distinguish between what needs to be done for
  commit-to-data server and what needs to be done for commit-to-MDS
  using the new flag PG_COMMIT_TO_DS. Otherwise we may end up calling
  put_lseg() on a bucket for a struct nfs_page that got written
  through the MDS.

- Fix a case where we were using list_del() on an nfs_page->wb_list
  instead of list_del_init().

- filelayout_initiate_commit needs to call filelayout_commit_release
  on error instead of the mds_ops->rpc_release(). Otherwise it won't
  clear the commit lock.

Cleanups:

- Let the files layout manage the commit lists for the pNFS case.
  Don't expose stuff like pnfs_choose_commit_list, and the fact
  that the commit buckets hold references to the layout segment
  in common code.

- Cast out the put_lseg() calls for the struct nfs_read/write_data->lseg
  into the pNFS layer from whence they came.

- Let the pNFS layer manage the NFS_INO_PNFS_COMMIT bit.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>
2012-03-17 11:09:33 -04:00
Trond Myklebust 2d2f24add1 NFSv4: Simplify the struct nfs4_stateid
Replace the union with the common struct stateid4 as defined in both
RFC3530 and RFC5661. This makes it easier to access the sequence id,
which will again make implementing support for parallel OPEN calls
easier.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-03-06 10:32:47 -05:00
Trond Myklebust f597c53790 NFSv4: Add helpers for basic copying of stateids
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-03-06 10:32:46 -05:00
Trond Myklebust a59c30acfb NFSv4.1: Get rid of redundant NFS4CLNT_LAYOUTRECALL tests
The NFS4CLNT_LAYOUTRECALL tests in pnfs_layout_process and
pnfs_update_layout are redundant.

In the case of a bulk layout recall, we're always testing for
the NFS_LAYOUT_BULK_RECALL flay anyway.
In the case of a file or segment recall, the call to
pnfs_set_layout_stateid() updates the layout_header 'barrier'
sequence id, which triggers the test in pnfs_layoutgets_blocked()
and is less race-prone than NFS4CLNT_LAYOUTRECALL anyway.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-03-01 11:17:47 -05:00
Weston Andros Adamson a030889a01 NFS: start printks w/ NFS: even if __func__ shown
This patch addresses printks that have some context to show that they are
from fs/nfs/, but for the sake of consistency now start with NFS:

Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-02-06 18:48:00 -05:00
Trond Myklebust 7d9dea915f NFS: Use kcalloc() when allocating arrays
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-01-31 19:28:22 -05:00
Trond Myklebust e2fecb215b NFS: Remove pNFS bloat from the generic write path
We have no business doing any this in the standard write release path.
Get rid of it, and put it in the pNFS layer.

Also, while we're at it, get rid of the completely bogus unlock/relock
semantics that were present in nfs_writeback_release_full(). It is
not only unnecessary, but actually dangerous to release the write lock
just in order to take it again in nfs_page_async_flush(). Better just
to open code the pgio operations in a pnfs helper.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-01-06 08:57:46 -05:00
Boaz Harrosh fe0fe83585 pnfs-obj: Must return layout on IO error
As mandated by the standard. In case of an IO error, a pNFS
objects layout driver must return it's layout. This is because
all device errors are reported to the server as part of the
layout return buffer.

This is implemented the same way PNFS_LAYOUTRET_ON_SETATTR
is done, through a bit flag on the pnfs_layoutdriver_type->flags
member. The flag is set by the layout driver that wants a
layout_return preformed at pnfs_ld_{write,read}_done in case
of an error.
(Though I have not defined a wrapper like pnfs_ld_layoutret_on_setattr
 because this code is never called outside of pnfs.c and pnfs IO
 paths)

Without this patch 3.[0-2] Kernels leak memory and have an annoying
WARN_ON after every IO error utilizing the pnfs-obj driver.

[This patch is for 3.2 Kernel. 3.1/0 Kernels need a different patch]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-01-06 08:55:33 -05:00
Linus Torvalds e25ba0ce03 Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: Revert pnfs ugliness from the generic NFS read code path
  SUNRPC: destroy freshly allocated transport in case of sockaddr init error
  NFS: Fix a regression in the referral code
  nfs: move nfs_file_operations declaration to bottom of file.c (try #2)
  nfs: when attempting to open a directory, fall back on normal lookup (try #5)
2011-11-22 08:54:15 -08:00
Trond Myklebust 62e4a76987 NFS: Revert pnfs ugliness from the generic NFS read code path
pNFS-specific code belongs in the pnfs layer. It should not be
hijacking generic NFS read or write code paths.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-10 14:50:26 -05:00
Linus Torvalds 32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00
Paul Gortmaker 143cb494cb fs: add module.h to files that were implicitly using it
Some files were using the complete module.h infrastructure without
actually including the header at all.  Fix them up in advance so
once the implicit presence is removed, we won't get failures like this:

  CC [M]  fs/nfsd/nfssvc.o
fs/nfsd/nfssvc.c: In function 'nfsd_create_serv':
fs/nfsd/nfssvc.c:335: error: 'THIS_MODULE' undeclared (first use in this function)
fs/nfsd/nfssvc.c:335: error: (Each undeclared identifier is reported only once
fs/nfsd/nfssvc.c:335: error: for each function it appears in.)
fs/nfsd/nfssvc.c: In function 'nfsd':
fs/nfsd/nfssvc.c:555: error: implicit declaration of function 'module_put_and_exit'
make[3]: *** [fs/nfsd/nfssvc.o] Error 1

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:30:31 -04:00
Peng Tao 92407e75ce nfs4: serialize layoutcommit
Current pnfs_layoutcommit_inode can not handle parallel layoutcommit.
And as Trond suggested , there is no need for client to optimize for
parallel layoutcommit. So add NFS_INO_LAYOUTCOMMITTING flag to
mark inflight layoutcommit and serialize lalyoutcommit with it.
Also mark_inode_dirty_sync if pnfs_layoutcommit_inode fails to issue
layoutcommit.

Reported-by: Vitaliy Gusev <gusev.vitaliy@nexenta.com>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-31 11:51:28 -04:00
Peng Tao 9b7eecdcfe pnfs: recoalesce when ld read pagelist fails
For pnfs pagelist read failure, we need to pg_recoalesce and resend IO to
mds.

Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18 09:08:14 -07:00
Peng Tao 8ce160c5ef pnfs: recoalesce when ld write pagelist fails
For pnfs pagelist write failure, we need to pg_recoalesce and resend IO to
mds.

Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18 09:08:13 -07:00
Peng Tao 1b0ae06877 pnfs: make _set_lo_fail generic
file layout and block layout both use it to set mark layout io failure
bit. So make it generic.

Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18 09:08:13 -07:00
Andy Adamson db29c08909 pnfs: cleanup_layoutcommit
This gives layout driver a chance to cleanup structures they put in at
encode_layoutcommit.

Signed-off-by: Andy Adamson <andros@netapp.com>
[fixup layout header pointer for layoutcommit]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
[rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()]
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 12:18:15 -04:00
Benny Halevy 738fd0f360 pnfs: add set-clear layoutdriver interface
To allow layout driver to issue getdevicelist at mount time, and clean up
at umount time.

[fixup non NFS_V4_1 set_pnfs_layoutdriver definition]
[pnfs: pass mntfh down the init_pnfs path]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 12:18:15 -04:00
Peng Tao a9bae5666d pnfs: let layoutcommit handle a list of lseg
There can be multiple lseg per file, so layoutcommit should be
able to handle it.

[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 12:18:15 -04:00
Peng Tao 9fa4075878 pnfs: save layoutcommit cred at layout header init
No need to save it for every lseg.
No need to save it at every pnfs_set_layoutcommit.

[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 12:18:14 -04:00
Peng Tao acff588053 pnfs: save layoutcommit lwb at layout header
No need to save it for every lseg.

[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 12:18:14 -04:00
Trond Myklebust 1f9453578f NFS: Clean up - simplify the switch to read/write-through-MDS
Use nfs_pageio_reset_read_mds and nfs_pageio_reset_write_mds instead of
completely reinitialising the struct nfs_pageio_descriptor.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-15 09:12:22 -04:00
Trond Myklebust dce81290ee NFS: Move the pnfs write code into pnfs.c
...and ensure that we recoalese to take into account differences in
differences in block sizes when falling back to write through the MDS.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-15 09:12:22 -04:00
Trond Myklebust 493292ddc7 NFS: Move the pnfs read code into pnfs.c
...and ensure that we recoalese to take into account differences in
block sizes when falling back to read through the MDS.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-15 09:12:21 -04:00
Andy Adamson c47abcf8ff NFSv4.1: do not use deviceids after MDS clientid invalidation
Mark all deviceids established under an expired MDS clientid as invalid.
Stop all new i/o through DS and send through the MDS.
Don't use any new LAYOUTGETs that use the invalid deviceid. Purge all layouts
established under the expired MDS clientid.
Remove the MDS clientid deviceid and data servers reference

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12 13:40:29 -04:00
Trond Myklebust a56aaa02b1 NFSv4.1: Clean up layoutreturn
Since we take a reference to it, we really ought to pass the a pointer to
the layout header in the arguments instead of assuming that
NFS_I(inode)->layout will forever point to the correct object.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12 13:40:29 -04:00
Andy Adamson 7c24d9489f NFSv4.1: File layout only supports whole file layouts
Ask for whole file layouts. Until support for layout segments is fully
supported in the file layout code, discard non-whole file layouts.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12 13:40:28 -04:00
Trond Myklebust e885de1a5b NFSv4.1: Fall back to ordinary i/o through the mds if we have no layout segment
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12 13:40:28 -04:00