In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20200831103542.305571-2-allen.lkml@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
'desc' variable is now defined but not used in sf_pdma_donebh_tasklet(),
causing this warning:
drivers/dma/sf-pdma/sf-pdma.c: In function 'sf_pdma_donebh_tasklet':
drivers/dma/sf-pdma/sf-pdma.c:287:23: warning: unused variable 'desc' [-Wunused-variable]
Remove this unused variable
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The original commit mixed up the forward and completion ring IDs for the
rx flow configuration.
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Fixes: 4927b1ab20 ("dmaengine: ti: k3-udma: Switch to k3_ringacc_request_rings_pair")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
rcar-dmac driver is used on Renesas R-Car Gen{2,3} and Renesas
RZ/G{1,2} SoC's, update the same to reflect the description
for RCAR_DMAC config.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Link: https://lore.kernel.org/r/20200911095734.19348-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use separate data for SoC dependent parameters. These parameters depends
on the DMA integration (either in HW or in SYSFW), the DMA controller
itself remains compatible with either the am654 or j721e variant.
j7200 have the same DMA as j721e with different number of channels, which
can be queried from HW, but SYSFW defines different rchan_oes_offset
number for j7200 (0x80) compared to j721e (0x400).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200910124329.21206-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When we got an error from DMA mapping API we convert a negative value
to unsigned long type and hence make user confused:
result #1: 'src mapping error' with src_off=0x19a72 dst_off=0xea len=0xccf4 (18446744073709551604)
Change this to print error codes as signed values.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200907101306.61824-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Because a callback is called twice when DMA transfer complete
the second callback may be possible to access a freed memory
if the first callback routines perform the dma_release_channel function.
So this patch serialized the callback functions
Signed-off-by: Brad Kim <brad.kim@semifive.com>
Tested-and-reviewed-by: Green Wan <green.wan@sifive.com>
Signed-off-by: Brad Kim <brad.kim@sifive.com>
Link: https://lore.kernel.org/r/20200903111726.3413-1-brad.kim@sifive.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Core:
- drop ACPI CSRT table reference after using it
- fix of_dma_router_xlate() error handling
Drivers: Off fixes in:
- idxd
- at_hdmac
- pl330
- dw-edma
- jz478
-----BEGIN PGP SIGNATURE-----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=DUvT
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"A couple of core fixes and odd driver fixes for dmaengine subsystem:
Core:
- drop ACPI CSRT table reference after using it
- fix of_dma_router_xlate() error handling
Drivers fixes in idxd, at_hdmac, pl330, dw-edma and jz478"
* tag 'dmaengine-fix-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: ti: k3-udma: Update rchan_oes_offset for am654 SYSFW ABI 3.0
drivers/dma/dma-jz4780: Fix race condition between probe and irq handler
dmaengine: dw-edma: Fix scatter-gather address calculation
dmaengine: ti: k3-udma: Fix the TR initialization for prep_slave_sg
dmaengine: pl330: Fix burst length if burst size is smaller than bus width
dmaengine: at_hdmac: add missing kfree() call in at_dma_xlate()
dmaengine: at_hdmac: add missing put_device() call in at_dma_xlate()
dmaengine: at_hdmac: check return value of of_find_device_by_node() in at_dma_xlate()
dmaengine: of-dma: Fix of_dma_router_xlate's of_dma_xlate handling
dmaengine: idxd: reset states after device disable or reset
dmaengine: acpi: Put the CSRT table after using it
SYSFW ABI 3.0 has changed the rchan_oes_offset value for am654 to support
SR2.
Since the kernel now needs SYSFW API 3.0 to work because the merged irqchip
update, we need to also update the am654 rchan_oes_offset.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200831091019.25273-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Export admin command status to sysfs attribute in order to allow user to
retrieve configuration error. Allows user tooling to retrieve the command
error and provide more user friendly error messages.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/159865278770.29455.8026892329182750127.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add sysfs attribute max_batch_size to wq in order to allow the max batch
size configured on a per wq basis. Add support code to configure
the valid user input on wq enable. This is a performance tuning
parameter.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/159865273617.29141.4383066301730821749.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add sysfs attribute max_xfer_size to wq in order to allow the max xfer
size configured on a per wq basis. Add support code to configure
the valid user input on wq enable. This is a performance tuning
parameter.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/159865265404.29141.3049399618578194052.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200828152637.16903-3-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200828152637.16903-2-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200828152637.16903-1-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Split IS_ERR_OR_NULL() check followed by additional conditional
to two simple conditionals. This increases readability and saves memory:
Function old new delta
dma_request_chan 700 697 -3
Total: Before=10224, After=10221, chg -0.03%
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200828144519.14483-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
New drivers should use dma_request_chan() instead
dma_request_slave_channel()
dma_request_slave_channel() is a simple wrapper for dma_request_chan()
eating up the error code for channel request failure and makes deferred
probing impossible.
Move the dma_request_slave_channel() into the header as inline function,
mark it as deprecated.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200828110507.22407-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit ef91bb196b ("kernel.h: Silence sparse warning in
lower_32_bits") caused new warnings to show in the fsldma driver, but
that commit was not to blame: it only exposed some very incorrect code
that tried to take the low 32 bits of an address.
That made no sense for multiple reasons, the most notable one being that
that code was intentionally limited to only 32-bit ppc builds, so "only
low 32 bits of an address" was completely nonsensical. There were no
high bits to mask off to begin with.
But even more importantly fropm a correctness standpoint, turning the
address into an integer then caused the subsequent address arithmetic to
be completely wrong too, and the "+1" actually incremented the address
by one, rather than by four.
Which again was incorrect, since the code was reading two 32-bit values
and trying to make a 64-bit end result of it all. Surprisingly, the
iowrite64() did not suffer from the same odd and incorrect model.
This code has never worked, but it's questionable whether anybody cared:
of the two users that actually read the 64-bit value (by way of some C
preprocessor hackery and eventually the 'get_cdar()' inline function),
one of them explicitly ignored the value, and the other one might just
happen to work despite the incorrect value being read.
This patch at least makes it not fail the build any more, and makes the
logic superficially sane. Whether it makes any difference to the code
_working_ or not shall remain a mystery.
Compile-tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Starting with core version 4.3.a the DMA bus attributes can (and should) be
read from the INTERFACE_DESCRIPTION (0x10) register.
For older core versions, this will still need to be provided from the
device-tree.
The bus-type values are identical to the ones stored in the device-trees,
so we just need to read them. Bus-width values are stored in log2 values,
so we just need to use them as shift values to make them equivalent to the
current format.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200825151950.57605-7-alexandru.ardelean@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The channel parameters (which are read from the device-tree) are adjusted
for the DMAEngine framework in the axi_dmac_parse_chan_dt() function, after
they are read from the device-tree.
When we want to read these from registers, we will need to use the same
logic, so this change splits the logic into a separate function.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200825151950.57605-6-alexandru.ardelean@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The clock may also be required to read registers from the IP core (if it is
provided and the driver needs to control it).
So, move it earlier in the probe.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200825151950.57605-4-alexandru.ardelean@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We want to enable the clock right after it is obtained. Then later we'll
want to read the core version via register-access (which requires the clock
to be enabled).
The initialization of the active_descs list can be postponed after reading
from registers (or reading the device-tree).
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200825151950.57605-3-alexandru.ardelean@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The 'version' of the IP core will be needed to adapt the driver to a new
feature (i.e. reading some DMA parameters from registers).
To do that, the version will be checked, so this is being moved out of the
axi_dmac_detect_caps() function.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200825151950.57605-2-alexandru.ardelean@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In probe, IRQ is requested before zchan->id is initialized which can be
read in the irq handler. Hence, shift request irq after other initializations
complete.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200821034423.12713-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Instruction dump uses two printk() in a row to print one instruction. Use
KERN_CONT to prevent breaking the output in the middle.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Link: https://lore.kernel.org/r/20200813204123.19044-1-l.stelmach@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix the source and destination physical address calculation of a
peripheral device on scatter-gather implementation.
This issue manifested during tests using a 64 bits architecture system.
The abnormal behavior wasn't visible before due to all previous tests
were done using 32 bits architecture system, that masked his effect.
Fixes: e63d79d1ff ("dmaengine: Add Synopsys eDMA IP core driver")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/8d3ab7e2ba96563fe3495b32f60077fffb85307d.1597327623.git.gustavo.pimentel@synopsys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The direction has been already validated in the main callback and there is
no need to check it again in the TR mode handlers for slave_sg and cyclic.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200824120120.9270-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The TR which needs to be initialized for the next sg entry is indexed by
tr_idx and not by the running i counter.
In case any sub element in the SG needs more than one TR, the code would
corrupt an already configured TR.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200824120108.9178-1-peter.ujfalusi@ti.com
Fixes: 6cf668a4ef ("dmaengine: ti: k3-udma: Use the TR counter helper for slave_sg and cyclic")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Move the burst len fixup after setting the generic value for it. This
finally enables the fixup introduced by commit 137bd11090 ("dmaengine:
pl330: Align DMA memcpy operations to MFIFO width"), which otherwise was
overwritten by the generic value.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 137bd11090 ("dmaengine: pl330: Align DMA memcpy operations to MFIFO width")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200825064617.16193-1-m.szyprowski@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
If memory allocation for 'atslave' succeed, at_dma_xlate() doesn't have a
corresponding kfree() in exception handling. Thus add kfree() for this
function implementation.
Fixes: bbe89c8e3d ("at_hdmac: move to generic DMA binding")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20200817115728.1706719-4-yukuai3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
If of_find_device_by_node() succeed, at_dma_xlate() doesn't have a
corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes: bbe89c8e3d ("at_hdmac: move to generic DMA binding")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20200817115728.1706719-3-yukuai3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The reurn value of of_find_device_by_node() is not checked, thus null
pointer dereference will be triggered if of_find_device_by_node()
failed.
Fixes: bbe89c8e3d ("at_hdmac: move to generic DMA binding")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20200817115728.1706719-2-yukuai3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The sparse tool complains as follows:
drivers/dma/xilinx/xilinx_dpdma.c:349:37: warning:
symbol 'dpdma_debugfs_reqs' was not declared. Should it be static?
This variable is not used outside of xilinx_dpdma.c, so this commit
marks it static.
Fixes: 1d220435ca ("dmaengine: xilinx: dpdma: Add debugfs support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200818112217.43816-1-weiyongjun1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
DW DMA IP-core provides a way to synthesize the DMA controller with
channels having different parameters like maximum burst-length,
multi-block support, maximum data width, etc. Those parameters both
explicitly and implicitly affect the channels performance. Since DMA slave
devices might be very demanding to the DMA performance, let's provide a
functionality for the slaves to be assigned with DW DMA channels, which
performance according to the platform engineer fulfill their requirements.
After this patch is applied it can be done by passing the mask of suitable
DMA-channels either directly in the dw_dma_slave structure instance or as
a fifth cell of the DMA DT-property. If mask is zero or not provided, then
there is no limitation on the channels allocation.
For instance Baikal-T1 SoC is equipped with a DW DMAC engine, which first
two channels are synthesized with max burst length of 16, while the rest
of the channels have been created with max-burst-len=4. It would seem that
the first two channels must be faster than the others and should be more
preferable for the time-critical DMA slave devices. In practice it turned
out that the situation is quite the opposite. The channels with
max-burst-len=4 demonstrated a better performance than the channels with
max-burst-len=16 even when they both had been initialized with the same
settings. The performance drop of the first two DMA-channels made them
unsuitable for the DW APB SSI slave device. No matter what settings they
are configured with, full-duplex SPI transfers occasionally experience the
Rx FIFO overflow. It means that the DMA-engine doesn't keep up with
incoming data pace even though the SPI-bus is enabled with speed of 25MHz
while the DW DMA controller is clocked with 50MHz signal. There is no such
problem has been noticed for the channels synthesized with
max-burst-len=4.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20200731200826.9292-6-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
According to the DW DMA controller Databook 2.18b (page 40 "3.5 Memory
Peripherals") memory peripherals don't have handshaking interface
connected to the controller, therefore they can never be a flow
controller. Since the CTLx.SRC_MSIZE and CTLx.DEST_MSIZE are properties
valid only for peripherals with a handshaking interface, we can freely
zero these fields out if the memory peripheral is selected to be the
source or the destination of the DMA transfers.
Note according to the databook, length of burst transfers to memory is
always equal to the number of data items available in a channel FIFO or
data items required to complete the block transfer, whichever is smaller;
length of burst transfers from memory is always equal to the space
available in a channel FIFO or number of data items required to complete
the block transfer, whichever is smaller.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20200731200826.9292-5-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Indeed in case of the DMA_DEV_TO_MEM DMA transfers it's enough to take the
destination memory address and the destination master data width into
account to calculate the CTLx.DST_TR_WIDTH setting of the memory
peripheral. According to the DW DMAC IP-core Databook 2.18b (page 66,
Example 5) at the and of a DMA transfer when the DMA-channel internal FIFO
is left with data less than for a single destination burst transaction,
the destination peripheral will enter the Single Transaction Region where
the DW DMA controller can complete a block transfer to the destination
using single transactions (non-burst transaction of CTLx.DST_TR_WIDTH
bytes). If there is no enough data in the DMA-channel internal FIFO for
even a single non-burst transaction of CTLx.DST_TR_WIDTH bytes, then the
channel enters "FIFO flush mode". That mode is activated to empty the FIFO
and flush the leftovers out to the memory peripheral. The flushing
procedure is simple. The data is sent to the memory by means of a set of
single transaction of CTLx.SRC_TR_WIDTH bytes. To sum up it's redundant to
use the LLPs length to find out the CTLx.DST_TR_WIDTH parameter value,
since each DMA transfer will be completed with the CTLx.SRC_TR_WIDTH bytes
transaction if it is required.
We suggest to remove the LLP entry length from the statement which
calculates the memory peripheral DMA transaction width since it's
redundant due to the feature described above. By doing so we'll improve
the memory bus utilization and speed up the DMA-channel performance for
DMA_DEV_TO_MEM DMA-transfers.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200731200826.9292-4-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
CFGx.FIFO_MODE field controls a DMA-controller "FIFO readiness" criterion.
In other words it determines when to start pushing data out of a DW
DMAC channel FIFO to a destination peripheral or from a source
peripheral to the DW DMAC channel FIFO. Currently FIFO-mode is set to one
for all DW DMAC channels. It means they are tuned to flush data out of
FIFO (to a memory peripheral or by accepting the burst transaction
requests) when FIFO is at least half-full (except at the end of the block
transfer, when FIFO-flush mode is activated) and are configured to get
data to the FIFO when it's at least half-empty.
Such configuration is a good choice when there is no slave device involved
in the DMA transfers. In that case the number of bursts per block is less
than when CFGx.FIFO_MODE = 0 and, hence, the bus utilization will improve.
But the latency of DMA transfers may increase when CFGx.FIFO_MODE = 1,
since DW DMAC will wait for the channel FIFO contents to be either
half-full or half-empty depending on having the destination or the source
transfers. Such latencies might be dangerous in case if the DMA transfers
are expected to be performed from/to a slave device. Since normally
peripheral devices keep data in internal FIFOs, any latency at some
critical moment may cause one being overflown and consequently losing
data. This especially concerns a case when either a peripheral device is
relatively fast or the DW DMAC engine is relatively slow with respect to
the incoming data pace.
In order to solve problems, which might be caused by the latencies
described above, let's enable the FIFO half-full/half-empty "FIFO
readiness" criterion only for DMA transfers with no slave device involved.
Thanks to the commit 99ba8b9b0d ("dmaengine: dw: Initialize channel
before each transfer") we can freely do that in the generic
dw_dma_initialize_chan() method.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200731200826.9292-3-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
of_dma_xlate callback can return ERR_PTR as well NULL in case of failure.
If error code is returned (not NULL) then the route should be released and
the router should not be registered for the channel.
Fixes: 56f13c0d95 ("dmaengine: of_dma: Support for DMA routers")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200806104928.25975-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The security accelerator within MCU domain supports two ports similarly
to the SA2UL in MAIN domain.
Add endpoint configuration for the two ingress and one egress threads of
the second port.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200803100724.19003-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add new PSI-L map file for the new TI j7200 SoC.
The DMA hardware in j7200 is the same as in j721e with different
set of peripherals resulting different PSI-L thread map compered
to j721e.
See J7200 Technical Reference Manual (SPRUIU1, June 2020)
for further details: https://www.ti.com/lit/pdf/spruiu1
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200803125713.17829-3-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Instead of separate of_machine_is_compatible() it is better to use
soc_device_match() and soc_device_attribute struct to get the PSI-L map
for the booted device.
By using soc_device_match() it is easier to add support for new devices.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200803125713.17829-2-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The of_device_id is included unconditionally by of.h header and used
in the driver as well. Remove of_match_ptr to fix W=1 compile test
warning with !CONFIG_OF:
drivers/dma/ti/omap-dma.c:1892:34: warning: 'omap_dma_match' defined but not used [-Wunused-const-variable=]
1892 | static const struct of_device_id omap_dma_match[] = {
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200728170939.28278-1-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Drivers using legacy PM have to manage PCI states and device's PM states
themselves. They also need to take care of configuration registers.
With improved and powerful support of generic PM, PCI Core takes care of
above mentioned, device-independent, jobs.
This driver makes use of PCI helper functions like
pci_save/restore_state(), pci_enable/disable_device(),
and pci_set_power_state() to do required operations. In generic mode, they
are no longer needed.
Change function parameter in both .suspend() and .resume() to
"struct device*" type. Use dev_get_drvdata() to get drv data.
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200720113740.353479-1-vaibhavgupta40@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The acpi_get_table() should be coupled with acpi_put_table() if
the mapped table is not used at runtime to release the table
mapping, put the CSRT table buf after using it.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/1595411661-15936-1-git-send-email-guohanjun@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull misc vfs updates from Al Viro:
"No common topic whatsoever in those, sorry"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: define inode flags using bit numbers
iov_iter: Move unnecessary inclusion of crypto/hash.h
dlmfs: clean up dlmfs_file_{read,write}() a bit
Core:
- Support out of order dma completion
- Support for repeating transaction
New controllers:
- Support for Actions S700 DMA engine
- Renesas R8A774E1, r8a7742 controller binding
- New driver for Xilinx DPDMA controller
Others:
- Support of out of order dma completion in idxd driver
- W=1 warning cleanup of subsystem
- Updates to ti-k3-dma, dw, idxd drivers
-----BEGIN PGP SIGNATURE-----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=OfZv
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- Support out of order dma completion
- Support for repeating transaction
New controllers:
- Support for Actions S700 DMA engine
- Renesas R8A774E1, r8a7742 controller binding
- New driver for Xilinx DPDMA controller
Other:
- Support of out of order dma completion in idxd driver
- W=1 warning cleanup of subsystem
- Updates to ti-k3-dma, dw, idxd drivers"
* tag 'dmaengine-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (68 commits)
dmaengine: dw: Don't include unneeded header to platform data header
dmaengine: Actions: Add support for S700 DMA engine
dmaengine: Actions: get rid of bit fields from dma descriptor
dt-bindings: dmaengine: convert Actions Semi Owl SoCs bindings to yaml
dmaengine: idxd: add missing invalid flags field to completion
dmaengine: dw: Initialize max_sg_burst capability
dmaengine: dw: Introduce max burst length hw config
dmaengine: dw: Initialize min and max burst DMA device capability
dmaengine: dw: Set DMA device max segment size parameter
dmaengine: dw: Take HC_LLP flag into account for noLLP auto-config
dmaengine: Introduce DMA-device device_caps callback
dmaengine: Introduce max SG burst capability
dmaengine: Introduce min burst length capability
dt-bindings: dma: dw: Add max burst transaction length property
dt-bindings: dma: dw: Convert DW DMAC to DT binding
dmaengine: ti: k3-udma: Query throughput level information from hardware
dmaengine: ti: k3-udma: Use defines for capabilities register parsing
dmaengine: xilinx: dpdma: Fix kerneldoc warning
dmaengine: xilinx: dpdma: add missing kernel doc
dmaengine: xilinx: dpdma: remove comparison of unsigned expression
...
core:
- add user def flag to cmd line modes
- dma_fence_wait added might_sleep
- dma-fence lockdep annotations
- indefinite fences are bad documentation
- gem CMA functions used in more drivers
- struct mutex removal
- more drm_ debug macro usage
- set/drop master api fixes
- fix for drm/mm hole size comparison
- drm/mm remove invalid entry optimization
- optimise drm/mm hole handling
- VRR debugfs added
- uncompressed AFBC modifier support
- multiple display id blocks in EDID
- multiple driver sg handling fixes
- __drm_atomic_helper_crtc_reset in all drivers
- managed vram helpers
ttm:
- ttm_mem_reg handling cleanup
- remove bo offset field
- drop CMA memtype flag
- drop mappable flag
xilinx:
- New Xilinx ZynqMP DisplayPort Subsystem driver
nouveau:
- add CRC support
- start using NVIDIA published class header files
- convert all push buffer emission to new macros
- Proper push buffer space management for EVO/NVD channels.
- firmware loading fixes
- 2MiB system memory pages support on Pascal and newer
vkms:
- larget cursor support
i915:
- Rocketlake platform enablement
- Early DG1 enablement
- Numerous GEM refactorings
- DP MST fixes
- FBC, PSR, Cursor, Color, Gamma fixes
- TGL, RKL, EHL workaround updates
- TGL 8K display support fixes
- SDVO/HDMI/DVI fixes
amdgpu:
- Initial support for Sienna Cichlid GPU
- Initial support for Navy Flounder GPU
- SI UVD/VCE support
- expose rotation property
- Add support for unique id on Arcturus
- Enable runtime PM on vega10 boards that support BACO
- Skip BAR resizing if the bios already did id
- Major swSMU code cleanup
- Fixes for DCN bandwidth calculations
amdkfd:
- Track SDMA usage per process
- SMI events interface
radeon:
- Default to on chip GART for AGP boards on all arches
- Runtime PM reference count fixes
msm:
- headers regenerated causing churn
- a650/a640 display and GPU enablement
- dpu dither support for 6bpc panels
- dpu cursor fix
- dsi/mdp5 enablement for sdm630/sdm636/sdm66
tegra:
- video capture prep support
- reflection support
mediatek:
- convert mtk_dsi to bridge API
meson:
- FBC support
sun4i:
- iommu support
rockchip:
- register locking fix
- per-pixel alpha support PX30 VOP
-
mgag200:
- ported to simple and shmem helpers
- device init cleanups
- use managed pci functions
- dropped hw cursor support
ast:
- use managed pci functions
- use managed VRAM helpers
- rework cursor support
malidp:
- dev_groups support
hibmc:
- refactor hibmc_drv_vdac:
vc4:
- create TXP CRTC
imx:
- error path fixes and cleanups
etnaviv:
- clock handling and error handling cleanups
- use pin_user_pages
-----BEGIN PGP SIGNATURE-----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=Yvtd
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"New xilinx displayport driver, AMD support for two new GPUs (more
header files), i915 initial support for RocketLake and some work on
their DG1 (discrete chip).
The core also grew some lockdep annotations to try and constrain what
drivers do with dma-fences, and added some documentation on why the
idea of indefinite fences doesn't work.
The long list is below.
I do have some fixes trees outstanding, but I'll follow up with those
later.
core:
- add user def flag to cmd line modes
- dma_fence_wait added might_sleep
- dma-fence lockdep annotations
- indefinite fences are bad documentation
- gem CMA functions used in more drivers
- struct mutex removal
- more drm_ debug macro usage
- set/drop master api fixes
- fix for drm/mm hole size comparison
- drm/mm remove invalid entry optimization
- optimise drm/mm hole handling
- VRR debugfs added
- uncompressed AFBC modifier support
- multiple display id blocks in EDID
- multiple driver sg handling fixes
- __drm_atomic_helper_crtc_reset in all drivers
- managed vram helpers
ttm:
- ttm_mem_reg handling cleanup
- remove bo offset field
- drop CMA memtype flag
- drop mappable flag
xilinx:
- New Xilinx ZynqMP DisplayPort Subsystem driver
nouveau:
- add CRC support
- start using NVIDIA published class header files
- convert all push buffer emission to new macros
- Proper push buffer space management for EVO/NVD channels.
- firmware loading fixes
- 2MiB system memory pages support on Pascal and newer
vkms:
- larger cursor support
i915:
- Rocketlake platform enablement
- Early DG1 enablement
- Numerous GEM refactorings
- DP MST fixes
- FBC, PSR, Cursor, Color, Gamma fixes
- TGL, RKL, EHL workaround updates
- TGL 8K display support fixes
- SDVO/HDMI/DVI fixes
amdgpu:
- Initial support for Sienna Cichlid GPU
- Initial support for Navy Flounder GPU
- SI UVD/VCE support
- expose rotation property
- Add support for unique id on Arcturus
- Enable runtime PM on vega10 boards that support BACO
- Skip BAR resizing if the bios already did id
- Major swSMU code cleanup
- Fixes for DCN bandwidth calculations
amdkfd:
- Track SDMA usage per process
- SMI events interface
radeon:
- Default to on chip GART for AGP boards on all arches
- Runtime PM reference count fixes
msm:
- headers regenerated causing churn
- a650/a640 display and GPU enablement
- dpu dither support for 6bpc panels
- dpu cursor fix
- dsi/mdp5 enablement for sdm630/sdm636/sdm66
tegra:
- video capture prep support
- reflection support
mediatek:
- convert mtk_dsi to bridge API
meson:
- FBC support
sun4i:
- iommu support
rockchip:
- register locking fix
- per-pixel alpha support PX30 VOP
mgag200:
- ported to simple and shmem helpers
- device init cleanups
- use managed pci functions
- dropped hw cursor support
ast:
- use managed pci functions
- use managed VRAM helpers
- rework cursor support
malidp:
- dev_groups support
hibmc:
- refactor hibmc_drv_vdac:
vc4:
- create TXP CRTC
imx:
- error path fixes and cleanups
etnaviv:
- clock handling and error handling cleanups
- use pin_user_pages"
* tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm: (1747 commits)
drm/msm: use kthread_create_worker instead of kthread_run
drm/msm/mdp5: Add MDP5 configuration for SDM636/660
drm/msm/dsi: Add DSI configuration for SDM660
drm/msm/mdp5: Add MDP5 configuration for SDM630
drm/msm/dsi: Add phy configuration for SDM630/636/660
drm/msm/a6xx: add A640/A650 hwcg
drm/msm/a6xx: hwcg tables in gpulist
drm/msm/dpu: add SM8250 to hw catalog
drm/msm/dpu: add SM8150 to hw catalog
drm/msm/dpu: intf timing path for displayport
drm/msm/dpu: set missing flush bits for INTF_2 and INTF_3
drm/msm/dpu: don't use INTF_INPUT_CTRL feature on sdm845
drm/msm/dpu: move some sspp caps to dpu_caps
drm/msm/dpu: update UBWC config for sm8150 and sm8250
drm/msm/dpu: use right setup_blend_config for sm8150 and sm8250
drm/msm/a6xx: set ubwc config for A640 and A650
drm/msm/adreno: un-open-code some packets
drm/msm: sync generated headers
drm/msm/a6xx: add build_bw_table for A640/A650
drm/msm/a6xx: fix crashstate capture for A650
...
A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory
subsystem and its drivers, starting out with a set of cleanup
patches.
A larger driver for the Tegra memory controller that was accidentally
missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware blobs
The tegra firmware driver gets extended to export some debug information
Various updates to i.MX firmware drivers, mostly cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space.
A new firmware based trusted platform module (fTPM) driver is added
based on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for identifying
a machine through the SMCCC ARCH_SOC_ID firmware interface rather than
by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device code.
There are also a number of updates to SoC specific drivers,
the main ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl8j3y4ACgkQmmx57+YA
GNm8Iw//euEC37KaiBDhlK3mcAL7NOdITqZpq4m+ZJZBsF02NDMWktJR8bYuOgmp
kjR4LjCxa2i+UOq1Ln+zYSlS27AngZLHFM+YSG3jqDho12GYIe4OBZB/q/hkDu71
L5jCPNrZV9+GIcean2u8LOWDNlQ4SZQyZ1/gcCK7y7I8W1pVulmJRhtJ0MNkezni
gDQ+OH+6+6XY8AethWK9ubsYH7SeJX/U6I8t5KJGhPr6FlaJFZOO5RTdUkBFMHpS
i4UaT4meuqZUjwz4BhjvoYul5AT6Zc8OOTQwk1FM7dIe47aI8VkWrWci/IekxoLh
UXtKbAJxerCIdehfiygX4pKtOmRKSisS2ocWsKg46Htu11ltv0XMRgyLyGv4Vm84
g+fKfKUL0SUueDqr+jKEq2aZdyLxwV5ZUoFt3IVsXdHRkZtxpN8jmOHOjV6erLVY
m7S85U5eclNdK5Ap7RSVvQa4NP3NTUvJd1IDNIneUVyACRkxzWEKmE3ZuEO4qttS
WSDW74m5ja80pltv1umFbGAsOUTZWA+WGULeXPv4CIooaD8RL6Jzs+7tkZEEhleU
WlGBFE4eJi/ChMeyTKXPvEqsQncLSf0mGzM4/DVY6XRSTIrW+cuj1/Gsso1BJdod
aZZ76uMNHJdAt0PcxL47lDUDxhJDkTwBsfGNJseZ3sYlAQ7Wmqo=
=nezz
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers
itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory subsystem
and its drivers, starting out with a set of cleanup patches.
A larger driver for the Tegra memory controller that was
accidentally missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware
blobs The tegra firmware driver gets extended to export some debug
information Various updates to i.MX firmware drivers, mostly
cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space. A new
firmware based trusted platform module (fTPM) driver is added based
on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for
identifying a machine through the SMCCC ARCH_SOC_ID firmware
interface rather than by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device
code.
There are also a number of updates to SoC specific drivers, the main
ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver"
* tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits)
soc: qcom: geni: Fix unused label warning
soc: qcom: smd-rpm: Fix kerneldoc
memory: jz4780_nemc: Only request IO memory the driver will use
soc: qcom: pdr: Reorder the PD state indication ack
MAINTAINERS: Add Git repository for memory controller drivers
memory: brcmstb_dpfe: Fix language typo
memory: samsung: exynos5422-dmc: Correct white space issues
memory: samsung: exynos-srom: Correct alignment
memory: pl172: Enclose macro argument usage in parenthesis
memory: of: Correct kerneldoc
memory: omap-gpmc: Fix language typo
memory: omap-gpmc: Correct white space issues
memory: omap-gpmc: Use 'unsigned int' for consistency
memory: omap-gpmc: Enclose macro argument usage in parenthesis
memory: omap-gpmc: Correct kerneldoc
memory: mvebu-devbus: Align with open parenthesis
memory: mvebu-devbus: Add missing braces to all arms of if statement
memory: bt1-l2-ctl: Add blank lines after declarations
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
...
- TI K3 Ring Accelerator updates
- Few non critical warining fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Y8Sq
-----END PGP SIGNATURE-----
Merge tag 'drivers_soc_for_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers
SOC: TI Keystone driver update for v5.9
- TI K3 Ring Accelerator updates
- Few non critical warining fixes
* tag 'drivers_soc_for_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
soc: ti/ti_sci_protocol.h: drop a duplicated word + clarify
soc: ti: k3: fix semicolon.cocci warnings
soc: ti: k3-ringacc: fix: warn: variable dereferenced before check 'ring'
dmaengine: ti: k3-udma: Switch to k3_ringacc_request_rings_pair
soc: ti: k3-ringacc: separate soc specific initialization
soc: ti: k3-ringacc: add request pair of rings api.
soc: ti: k3-ringacc: add ring's flags to dump
soc: ti: k3-ringacc: Move state tracking variables under a struct
dt-bindings: soc: ti: k3-ringacc: convert bindings to json-schema
Link: https://lore.kernel.org/r/1595711814-7015-1-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
DMA controller present on S700 SoC is compatible with the one on S900
(as most of registers are same), but it has different DMA descriptor
structure where registers "fcnt" and "ctrlb" uses different encoding.
For instance, on S900 "fcnt" starts at offset 0x0c and uses upper 12
bits whereas on S700, it starts at offset 0x1c and uses lower 12 bits.
This commit adds support for DMA controller present on S700.
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
Link: https://lore.kernel.org/r/1595180527-11320-4-git-send-email-amittomer25@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
At the moment, Driver uses bit fields to describe registers of the DMA
descriptor structure that makes it less portable and maintainable, and
Andre suugested(and even sketched important bits for it) to make use of
array to describe this DMA descriptors instead. It gives the flexibility
while extending support for other platform such as Actions S700.
This commit removes the "owl_dma_lli_hw" (that includes bit-fields) and
uses array to describe DMA descriptor.
Suggested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1595180527-11320-3-git-send-email-amittomer25@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Multi-block support provides a way to map the kernel-specific SG-table so
the DW DMA device would handle it as a whole instead of handling the
SG-list items or so called LLP block items one by one. So if true LLP
list isn't supported by the DW DMA engine, then soft-LLP mode will be
utilized to load and execute each LLP-block one by one. The soft-LLP mode
of the DMA transactions execution might not work well for some DMA
consumers like SPI due to its Tx and Rx buffers inter-dependency. Let's
initialize the max_sg_burst DMA channels capability based on the nollp
flag state. If it's true, no hardware accelerated LLP is available and
max_sg_burst should be set with 1, which means that the DMA engine
can handle only a single SG list entry at a time. If noLLP is set to
false, then hardware accelerated LLP is supported and the DMA engine
can handle infinite number of SG entries in a single DMA transaction.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-11-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
IP core of the DW DMA controller may be synthesized with different
max burst length of the transfers per each channel. According to Synopsis
having the fixed maximum burst transactions length may provide some
performance gain. At the same time setting up the source and destination
multi size exceeding the max burst length limitation may cause a serious
problems. In our case the DMA transaction just hangs up. In order to fix
this lets introduce the max burst length platform config of the DW DMA
controller device and don't let the DMA channels configuration code
exceed the burst length hardware limitation.
Note the maximum burst length parameter can be detected either in runtime
from the DWC parameter registers or from the dedicated DT property.
Depending on the IP core configuration the maximum value can vary from
channel to channel so by overriding the channel slave max_burst capability
we make sure a DMA consumer will get the channel-specific max burst
length.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-10-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
According to the DW APB DMAC data book the minimum burst transaction
length is 1 and it's true for any version of the controller since
isn't parametrised in the coreAssembler so can't be changed at the
IP-core synthesis stage. The maximum burst transaction can vary from
channel to channel and from controller to controller depending on a
IP-core parameter the system engineer activated during the IP-core
synthesis. Let's initialise both min_burst and max_burst members of the
DMA controller descriptor with extreme values so the DMA clients could
use them to properly optimize the DMA requests. The channels and
controller-specific max_burst length initialization will be introduced
by the follow-up patches.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-9-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Maximum block size DW DMAC configuration corresponds to the max segment
size DMA parameter in the DMA core subsystem notation. Lets set it with a
value specific to the probed DW DMA controller. It shall help the DMA
clients to create size-optimized SG-list items for the controller. This in
turn will cause less dw_desc allocations, less LLP reinitializations,
better DMA device performance.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-8-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Full multi-block transfers functionality is enabled in DW DMA
controller only if CHx_MULTI_BLK_EN is set. But LLP-based transfers
can be executed only if hardcode channel x LLP register feature isn't
enabled, which can be switched on at the IP core synthesis for
optimization. If it's enabled then the LLP register is hardcoded to
zero, so the blocks chaining based on the LLPs is unsupported.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-7-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There are DMA devices (like ours version of Synopsys DW DMAC) which have
DMA capabilities non-uniformly redistributed between the device channels.
In order to provide a way of exposing the channel-specific parameters to
the DMA engine consumers, we introduce a new DMA-device callback. In case
if provided it gets called from the dma_get_slave_caps() method and is
able to override the generic DMA-device capabilities.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-6-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Some devices may lack the support of the hardware accelerated SG list
entries automatic walking through and execution. In this case a burden of
the SG list traversal and DMA engine re-initialization lies on the
DMA engine driver (normally implemented by using a DMA transfer completion
IRQ to recharge the DMA device with a next SG list entry). But such
solution may not be suitable for some DMA consumers. In particular SPI
devices need both Tx and Rx DMA channels work synchronously in order
to avoid the Rx FIFO overflow. In case if Rx DMA channel is paused for
some time while the Tx DMA channel works implicitly pulling data into the
Rx FIFO, the later will be eventually overflown, which will cause the data
loss. So if SG list entries aren't automatically fetched by the DMA
engine, but are one-by-one manually selected for execution in the
ISRs/deferred work/etc., such problem will eventually happen due to the
non-deterministic latencies of the service execution.
In order to let the DMA consumer know about the DMA device capabilities
regarding the hardware accelerated SG list traversal we introduce the
max_sg_burst capability. It is supposed to be initialized by the DMA engine
driver with 0 if there is no limitation of the number of SG entries
atomically executed and with non-zero value if there is such constraints,
so the upper limit is determined by the number set to the property.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-5-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Some hardware aside from default 0/1 may have greater minimum burst
transactions length constraints. Here we introduce the DMA device
and slave capability, which if required can be initialized by the DMA
engine driver with the device-specific value.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-4-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The CAP3 register contains information about the number of
HCHAN (High Capacity) and UCHAN (Ultra High Capacity) channels in UDMAP.
Based on this information the start indexes of the levels can be calculated
without a need of a table in the match data.
On am654 the CAP3 does not contain information about the number different
channels. Set up the tpl information based on the available documentation.
This change will allow to use the same compatible for different SoCs where
the only difference is the number of channel types.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200717120903.8774-3-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We only request ring pairs via K3 DMA driver, switch to use the new
k3_ringacc_request_rings_pair() to simplify the code.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8UzA4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGQ7cH/3v+Gv+SmHJCvaT2
CSu0+7okVnYbY3UTb3hykk7/aOqb6284KjxR03r0CWFzsEsZVhC5pvvruASSiMQg
Pi04sLqv6CsGLHd1n+pl4AUYEaxq6k4KS3uU3HHSWxrahDDApQoRUx2F8lpOxyj8
RiwnoO60IMPA7IFJqzcZuFqsgdxqiiYvnzT461KX8Mrw6fyMXeR2KAj2NwMX8dZN
At21Sf8+LSoh6q2HnugfiUd/jR10XbfxIIx2lXgIinb15GXgWydEQVrDJ7cUV7ix
Jd0S+dtOtp+lWtFHDoyjjqqsMV7+G8i/rFNZoxSkyZqsUTaKzaR6JD3moSyoYZgG
0+eXO4A=
=9EpR
-----END PGP SIGNATURE-----
Merge v5.8-rc6 into drm-next
I've got a silent conflict + two trees based on fixes to merge.
Fixes a silent merge with amdgpu
Signed-off-by: Dave Airlie <airlied@redhat.com>
Document the struct xilinx_dpdma_chan desc field to fix a kerneldoc
undocumented member warning (which can be reproduced by compiling with
W=1).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200722161747.30048-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
xilinx_dpdma_sw_desc_set_dma_addrs() documentation is missing describing
'xdev', so add it
drivers/dma/xilinx/xilinx_dpdma.c:313: warning: Function parameter or
member 'xdev' not described in 'xilinx_dpdma_sw_desc_set_dma_addrs'
Link: https://lore.kernel.org/r/20200718135201.191881-2-vkoul@kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
xilinx_dpdma_config() channel id is unsigned int and compares with
ZYNQMP_DPDMA_VIDEO0 which is zero, so remove this comparison
drivers/dma/xilinx/xilinx_dpdma.c:1073:15: warning: comparison of
unsigned expression in ‘>= 0’ is always true [-Wtype-limits] if
(chan->id >= ZYNQMP_DPDMA_VIDEO0 && chan->id <= ZYNQMP_DPDMA_VIDEO2)
Link: https://lore.kernel.org/r/20200718135201.191881-1-vkoul@kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Extend NXP QDMA driver to check transmission errors
The NXP QDMA driver (fsl-qdma.c) does not check the status bits
that indicate if a DMA transfer has been completed successfully.
This patch extends the driver to do exactly this.
Signed-off-by: Mathias Koehrer <mathias.koehrer@etas.com>
Link: https://lore.kernel.org/r/744443c0462aac2df4754f99500a911527c0b235.camel@bosch.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The ZynqMP DisplayPort subsystem includes a DMA engine called DPDMA with
6 DMa channels (4 for display and 2 for audio). This driver exposes the
DPDMA through the dmaengine API, to be used by audio (ALSA) and display
(DRM) drivers for the DisplayPort subsystem.
Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Tejas Upadhyay <tejasu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200717013337.24122-4-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/dma/ioat/dma.c:202: warning: Function parameter or member 'ioat_chan' not described in 'ioat_update_pending'
drivers/dma/ioat/dma.c:202: warning: Excess function parameter 'ioat' description in 'ioat_update_pending'
drivers/dma/ioat/dma.c:465: warning: Function parameter or member 'ioat_chan' not described in 'ioat_check_space_lock'
drivers/dma/ioat/dma.c:465: warning: Excess function parameter 'ioat' description in 'ioat_check_space_lock'
drivers/dma/ioat/dma.c:591: warning: Function parameter or member 'ioat_chan' not described in '__cleanup'
drivers/dma/ioat/dma.c:591: warning: Function parameter or member 'phys_complete' not described in '__cleanup'
drivers/dma/ioat/dma.c:591: warning: Excess function parameter 'ioat' description in '__cleanup'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Leonid Ravich <Leonid.Ravich@emc.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-18-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/dma/ioat/init.c:608: warning: Function parameter or member 'c' not described in 'ioat_free_chan_resources'
drivers/dma/ioat/init.c:608: warning: Excess function parameter 'chan' description in 'ioat_free_chan_resources'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-17-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/dma/mv_xor_v2.c:168: warning: Function parameter or member 'clk' not described in 'mv_xor_v2_device'
drivers/dma/mv_xor_v2.c:168: warning: Function parameter or member 'reg_clk' not described in 'mv_xor_v2_device'
drivers/dma/mv_xor_v2.c:168: warning: Function parameter or member 'irq_tasklet' not described in 'mv_xor_v2_device'
drivers/dma/mv_xor_v2.c:168: warning: Function parameter or member 'hw_queue_idx' not described in 'mv_xor_v2_device'
drivers/dma/mv_xor_v2.c:168: warning: Function parameter or member 'msi_desc' not described in 'mv_xor_v2_device'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200714111546.1755231-16-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/dma/xgene-dma.c:310: warning: Function parameter or member 'dev' not described in 'xgene_dma'
drivers/dma/xgene-dma.c:310: warning: Function parameter or member 'clk' not described in 'xgene_dma'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Prasad Sahu <rsahu@apm.com>
Cc: Loc Ho <lho@apm.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-15-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/dma/nbpfaxi.c:157: warning: Function parameter or member 'chan' not described in 'nbpf_desc'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'tasklet' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_src_addr' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_src_width' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_src_burst' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_dst_addr' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_dst_width' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_dst_burst' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'running' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'paused' not described in 'nbpf_channel'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20200714111546.1755231-14-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Also remove superfluous entry.
Fixes the following W=1 kernel build warning(s):
drivers/dma/iop-adma.c:418: warning: Function parameter or member 'chan' not described in 'iop_adma_alloc_chan_resources'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200714111546.1755231-13-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/dma/imx-sdma.c:383: warning: Function parameter or member 'slave_config' not described in 'sdma_channel'
drivers/dma/imx-sdma.c:383: warning: Function parameter or member 'context_loaded' not described in 'sdma_channel'
drivers/dma/imx-sdma.c:383: warning: Function parameter or member 'terminate_worker' not described in 'sdma_channel'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-12-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Kerneldoc formatting for attributes should be '@.*: '.
Fixes the following W=1 kernel build warning(s):
drivers/dma/fsl-qdma.c:154: warning: Function parameter or member 'data' not described in 'fsl_qdma_format'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Wen He <wen.he_1@nxp.com>
Cc: Jiaheng Fan <jiaheng.fan@nxp.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-11-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/dma/sun4i-dma.c:321: warning: Function parameter or member 'priv' not described in '__execute_vchan_pending'
drivers/dma/sun4i-dma.c:321: warning: Function parameter or member 'vchan' not described in '__execute_vchan_pending'
drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'chan' not described in 'generate_ndma_promise'
drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'src' not described in 'generate_ndma_promise'
drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'dest' not described in 'generate_ndma_promise'
drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'len' not described in 'generate_ndma_promise'
drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'sconfig' not described in 'generate_ndma_promise'
drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'direction' not described in 'generate_ndma_promise'
drivers/dma/sun4i-dma.c:501: warning: Function parameter or member 'chan' not described in 'generate_ddma_promise'
drivers/dma/sun4i-dma.c:501: warning: Function parameter or member 'src' not described in 'generate_ddma_promise'
drivers/dma/sun4i-dma.c:501: warning: Function parameter or member 'dest' not described in 'generate_ddma_promise'
drivers/dma/sun4i-dma.c:501: warning: Function parameter or member 'len' not described in 'generate_ddma_promise'
drivers/dma/sun4i-dma.c:501: warning: Function parameter or member 'sconfig' not described in 'generate_ddma_promise'
drivers/dma/sun4i-dma.c:577: warning: Function parameter or member 'contract' not described in 'get_next_cyclic_promise'
drivers/dma/sun4i-dma.c:596: warning: Function parameter or member 'vd' not described in 'sun4i_dma_free_contract'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: "Emilio López" <emilio@elopez.com.ar>
Link: https://lore.kernel.org/r/20200714111546.1755231-10-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/dma/at_hdmac.c:666: warning: Function parameter or member 'tx' not described in 'atc_tx_submit'
drivers/dma/at_hdmac.c:666: warning: Excess function parameter 'desc' description in 'atc_tx_submit'
drivers/dma/at_hdmac.c:1206: warning: Function parameter or member 'reg_width' not described in 'atc_dma_cyclic_check_values'
drivers/dma/at_hdmac.c:1206: warning: Function parameter or member 'buf_addr' not described in 'atc_dma_cyclic_check_values'
drivers/dma/at_hdmac.c:1206: warning: Function parameter or member 'period_len' not described in 'atc_dma_cyclic_check_values'
drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'chan' not described in 'atc_dma_cyclic_fill_desc'
drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'desc' not described in 'atc_dma_cyclic_fill_desc'
drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'period_index' not described in 'atc_dma_cyclic_fill_desc'
drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'buf_addr' not described in 'atc_dma_cyclic_fill_desc'
drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'reg_width' not described in 'atc_dma_cyclic_fill_desc'
drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'period_len' not described in 'atc_dma_cyclic_fill_desc'
drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'direction' not described in 'atc_dma_cyclic_fill_desc'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-9-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix some misspelling/description issues, demote non-kerneldoc header
to standard comment block and provide a new description for
msgdma_desc_config()'s 'stride' parameter.
Fixes the following W=1 kernel build warning(s):
drivers/dma/altera-msgdma.c:163: warning: Function parameter or member 'node' not described in 'msgdma_sw_desc'
drivers/dma/altera-msgdma.c:163: warning: Function parameter or member 'tx_list' not described in 'msgdma_sw_desc'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'lock' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'dev' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'irq_tasklet' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'pending_list' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'free_list' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'active_list' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'done_list' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'desc_free_cnt' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'idle' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'dmadev' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'dmachan' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'hw_desq' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'sw_desq' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'npendings' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'slave_cfg' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'irq' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'csr' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'desc' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'resp' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:265: warning: Function parameter or member 'stride' not described in 'msgdma_desc_config'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Stefan Roese <sr@denx.de>
Link: https://lore.kernel.org/r/20200714111546.1755231-8-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/dma/ste_dma40.c:398: warning: Function parameter or member 'dma_addr' not described in 'd40_lcla_pool'
drivers/dma/ste_dma40.c:601: warning: Function parameter or member 'dma_parms' not described in 'd40_base'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Per Forlin <per.forlin@stericsson.com>
Cc: Jonas Aaberg <jonas.aberg@stericsson.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-7-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
No 'struct' title is provided. Nor are any attribute descriptions.
Fixes the following W=1 kernel build warning(s):
drivers/dma/pl330.c:295: warning: cannot understand function prototype: 'struct pl330_reqcfg '
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Jaswinder Singh <jassi.brar@samsung.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-6-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/dma/mmp_pdma.c:298: warning: Function parameter or member 'chan' not described in 'start_pending_queue'
drivers/dma/mmp_pdma.c:393: warning: Function parameter or member 'dchan' not described in 'mmp_pdma_alloc_chan_resources'
drivers/dma/mmp_pdma.c:862: warning: Function parameter or member 'dchan' not described in 'mmp_pdma_issue_pending'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200714111546.1755231-5-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
A couple of entries were missed, causing kerneldoc to complain.
Fixes the following W=1 kernel build warning(s):
drivers/dma/ep93xx_dma.c:183: warning: Function parameter or member 'slave_config' not described in 'ep93xx_dma_chan'
drivers/dma/ep93xx_dma.c:215: warning: Function parameter or member 'hw_synchronize' not described in 'ep93xx_dma_engine'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Mika Westerberg <mika.westerberg@iki.fi>
Link: https://lore.kernel.org/r/20200714111546.1755231-4-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/dma/of-dma.c:57: warning: Function parameter or member 'ofdma' not described in 'of_dma_router_xlate'
drivers/dma/of-dma.c:57: warning: Excess function parameter 'of_dma' description in 'of_dma_router_xlate'
drivers/dma/of-dma.c:107: warning: Function parameter or member 'data' not described in 'of_dma_controller_register'
drivers/dma/of-dma.c:308: warning: Function parameter or member 'ofdma' not described in 'of_dma_simple_xlate'
drivers/dma/of-dma.c:308: warning: Excess function parameter 'of_dma' description in 'of_dma_simple_xlate'
drivers/dma/of-dma.c:338: warning: Function parameter or member 'ofdma' not described in 'of_dma_xlate_by_chan_id'
drivers/dma/of-dma.c:338: warning: Excess function parameter 'of_dma' description in 'of_dma_xlate_by_chan_id'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200714111546.1755231-3-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Struct attribute names must be an exact match or the kerneldoc checker
gets confused.
Fixes the following W=1 kernel build warning(s):
drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc1' not described in 'mtk_hsdma_pdesc'
drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc2' not described in 'mtk_hsdma_pdesc'
drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc3' not described in 'mtk_hsdma_pdesc'
drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc4' not described in 'mtk_hsdma_pdesc'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-mediatek@lists.infradead.org
Link: https://lore.kernel.org/r/20200714111546.1755231-2-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83
Link: https://lore.kernel.org/r/20200619224334.GA7857@embeddedor
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Move the uc->tchan/rchan checks to the IO wrappers itself instead of
calling the functions with tchan/rchan directly.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-6-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Instead of using higher level wrappers (udma_rchanrt/tchanrt read/write),
use the underlying register access functions directly.
This will allow changes in the higher level wrappers within the DMAengine
driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-5-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The register offsets and functions are the same among TCHAN and RCHAN.
Use generic, common names for them.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-4-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The ring_get_occ is redundant as the k3_ringacc_ring_pop() is also
checking the occ of the ring.
With removing the ring_get_occ, the function can be simplified as well.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-3-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The descriptors are allocated via wither dma_pool or dma_alloc_coherent.
There is no need for the dma_sync_singel_* calls.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-2-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix build errors when CONFIG_PCI_MSI is not enabled by making the
driver depend on PCI_MSI:
ld: drivers/dma/idxd/device.o: in function `idxd_mask_msix_vector':
device.c:(.text+0x26f): undefined reference to `pci_msi_mask_irq'
ld: drivers/dma/idxd/device.o: in function `idxd_unmask_msix_vector':
device.c:(.text+0x2af): undefined reference to `pci_msi_unmask_irq'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: dmaengine@vger.kernel.org
Cc: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/9dee3f46-70d9-ea75-10cb-5527ab297d1d@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This patch adds the qurik to use burst transfers only
for pl330 controller, even for request with a length of 1.
Although, the correct way should be: if the peripheral request
length is 1, the peripheral should use SINGLE request, and then
notify the dmac using SINGLE mode by src/dst_maxburst with 1.
For example, on the Rockchip SoCs, all the peripherals can use
SINGLE or BURST request by setting GRF registers. it is possible
that if these peripheral drivers are used only for Rockchip SoCs.
Unfortunately, it's not, such as dw uart, which is used so widely,
and we can't set src/dst_maxburst according to the SoCs' specific
to compatible with all the other SoCs.
So, for convenience, all the peripherals are set as BURST request
by default on the Rockchip SoCs. even for request with a length of 1.
the current pl330 driver will perform SINGLE transfer if the client's
maxburst is 1, which still should be working according to chapter 2.6.6
of datasheet which describe how DMAC performs SINGLE transfers for
a BURST request. Unfortunately, it's broken on the Rockchip SoCs,
which support only matching transfers, such as BURST transfer for
BURST request, SINGLE transfer for SINGLE request.
Finally, we add the quirk to specify pl330 to use burst transfers only.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1593439555-68130-5-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is no reason to limit the performance on the 'NO-FLUSHP' SoCs,
because 'FLUSHP' instruction is broken on these platforms, so remove
the limit to improve the efficiency.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1593439555-68130-2-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Switch driver to use MSIX mask and unmask instead of the ignore bit.
When ignore bit is cleared, we must issue an MMIO read to ensure writes
have all arrived and check and process any additional completions. The
ignore bit does not queue up any pending MSIX interrupts. The mask bit
however does. Use API call from interrupt subsystem to mask MSIX
interrupt since the hardware does not have convenient mask bit register.
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/159319517621.70410.11816465052708900506.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add wq drain support. When a wq is being released, it needs to wait for
all in-flight operation to complete. A device control function
idxd_wq_drain() has been added to facilitate this. A wq drain call
is added to the char dev on release to make sure all user operations are
complete. A wq drain is also added before the wq is being disabled.
A drain command can take an unpredictable period of time. Interrupt support
for device commands is added to allow waiting on the command to
finish. If a previous command is in progress, the new submitter can block
until the current command is finished before proceeding. The interrupt
based submission will submit the command and then wait until a command
completion interrupt happens to complete. All commands are moved to the
interrupt based command submission except for the device reset during
probe, which will be polled.
Fixes: 42d279f913 ("dmaengine: idxd: add char driver to expose submission portal to userland")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/159319502515.69593.13451647706946040301.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The method struct pci_error_handlers.error_detected() is defined and
documented as taking an 'enum pci_channel_state' for the second argument,
but most drivers use 'pci_channel_state_t' instead.
This 'pci_channel_state_t' is not a typedef for the enum but a typedef for
a bitwise type in order to have better/stricter typechecking.
Consolidate everything by using 'pci_channel_state_t' in the method's
definition, in the related helpers and in the drivers.
Enforce use of 'pci_channel_state_t' by replacing 'enum pci_channel_state'
with an anonymous 'enum'.
Note: Currently, from a typechecking point of view this patch changes
nothing because only the constants defined by the enum are bitwise, not the
enum itself (sparse doesn't have the notion of 'bitwise enum'). This may
change in some not too far future, hence the patch.
[bhelgaas: squash in
https://lore.kernel.org/r/20200702162651.49526-3-luc.vanoostenryck@gmail.comhttps://lore.kernel.org/r/20200702162651.49526-4-luc.vanoostenryck@gmail.com]
Link: https://lore.kernel.org/r/20200702162651.49526-2-luc.vanoostenryck@gmail.com
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
DMA transaction time to completion is a function of PCI bandwidth,
transaction size and a queue depth. So hard coded value for timeouts
might be wrong for some scenarios.
Signed-off-by: Leonid Ravich <Leonid.Ravich@emc.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20200701184816.29138-1-leonid.ravich@dell.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Due to recent fixes in m68k arch-specific I/O accessor macros, this
driver is not working anymore for ColdFire. Fix wrong tcd endianness
removing additional swaps, since edma_writex() functions should already
take care of any eventual swap if needed.
Note, i could only test the change in ColdFire mcf54415 and Vybrid
vf50 / Colibri where i don't see any issue. So, every feedback and
test for all other SoCs involved is really appreciated.
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Reported-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20200701225205.1674463-1-angelo.dureghello@timesys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In some cases DMA can be used only with a consumer which does runtime power
management and on the platforms, that have DMA auto power gating logic
(see comments in the drivers/acpi/acpi_lpss.c), may result in DMA losing
its context. Simple mitigation of this issue is to initialize channel
each time the consumer initiates a transfer.
Fixes: cfdf5b6cc5 ("dw_dmac: add support for Lynxpoint DMA controllers")
Reported-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206403
Link: https://lore.kernel.org/r/20200705115620.51929-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix unmasking of misc interrupt handler when completing normal. It exits
early and skips the unmasking with the current implementation. Fix to
unmask interrupt when exiting normally.
Fixes: bfe1d56091 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/159311256528.855.11527922406329728512.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
After disabling a device, we should clean up the internal state for
the wqs and zero out the configuration registers. Without doing so can cause
issues when the user reprogram the wqs.
Fixes: c52ca47823 ("dmaengine: idxd: add configuration component of driver")
Reported-by: Yixin Zhang <yixin.zhang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Yixin Zhang <yixin.zhang@intel.com>
Link: https://lore.kernel.org/r/159311264246.1198.11955791213681679428.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The header file linux/uio.h includes crypto/hash.h which pulls in
most of the Crypto API. Since linux/uio.h is used throughout the
kernel this means that every tiny bit of change to the Crypto API
causes the entire kernel to get rebuilt.
This patch fixes this by moving it into lib/iov_iter.c instead
where it is actually used.
This patch also fixes the ifdef to use CRYPTO_HASH instead of just
CRYPTO which does not guarantee the existence of ahash.
Unfortunately a number of drivers were relying on linux/uio.h to
provide access to linux/slab.h. This patch adds inclusions of
linux/slab.h as detected by build failures.
Also skbuff.h was relying on this to provide a declaration for
ahash_request. This patch adds a forward declaration instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The PCI config accessors (pci_read_config_word(), et al) return
PCIBIOS_SUCCESSFUL (zero) or positive error values like
PCIBIOS_FUNC_NOT_SUPPORTED.
The PCIe capability accessors (pcie_capability_read_word(), et al)
similarly return PCIBIOS errors, but some callers assume they return
generic errno values like -EINVAL.
For example, the Myri-10G probe function returns a positive PCIBIOS error
if the pcie_capability_clear_and_set_word() in pcie_set_readrq() fails:
myri10ge_probe
status = pcie_set_readrq
return pcie_capability_clear_and_set_word
if (status)
return status
A positive return from a PCI driver probe function would cause a "Driver
probe function unexpectedly returned" warning from local_pci_probe()
instead of the desired probe failure.
Convert PCIBIOS errors to generic errno for all callers of:
pcie_capability_read_word
pcie_capability_read_dword
pcie_capability_write_word
pcie_capability_write_dword
pcie_capability_set_word
pcie_capability_set_dword
pcie_capability_clear_word
pcie_capability_clear_dword
pcie_capability_clear_and_set_word
pcie_capability_clear_and_set_dword
that check the return code for anything other than zero.
[bhelgaas: commit log, squash together]
Suggested-by: Bjorn Helgaas <bjorn@helgaas.com>
Link: https://lore.kernel.org/r/20200615073225.24061-1-refactormyself@gmail.com
Signed-off-by: Bolarinwa Olayemi Saheed <refactormyself@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200624064626.19855-1-dinghao.liu@zju.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
According to the datasheet of pl330:
Example 2-1 Using DMAGO with the debug instruction registers
1. Create a program for the DMA channel
2. Store the program in a region of system memory
3. Poll the DBGSTATUS Register to ensure that the debug is idle
4. Write to the DBGINST0 Register
5. Write to the DBGINST1 Register
6. Write zero to the DBGCMD Register
so, we should make sure the debug is idle before step 4/5/6, not
only step 6. if not, there maybe a risk that fail to write DBGINST0/1.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1591234598-78919-1-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On Toradex Colibri VF50 (Vybrid VF5xx) with fsl-edma driver NULL pointer
exception happens occasionally on serial output initiated by login
timeout.
This was reproduced only if kernel was built with significant debugging
options and EDMA driver is used with serial console.
Issue looks like a race condition between interrupt handler
fsl_edma_tx_handler() (called as a result of fsl_edma_xfer_desc()) and
terminating the transfer with fsl_edma_terminate_all().
The fsl_edma_tx_handler() handles interrupt for a transfer with already
freed edesc and idle==true.
The mcf-edma driver shares design and lot of code with fsl-edma. It
looks like being affected by same problem. Fix this pattern the same
way as fix for fsl-edma driver.
Fixes: e7a3ff92ea ("dmaengine: fsl-edma: add ColdFire mcf5441x edma support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Robin Gong <yibin.gong@nxp.com>
Link: https://lore.kernel.org/r/1591881665-25592-1-git-send-email-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
NULL pointer exception happens occasionally on serial output initiated
by login timeout. This was reproduced only if kernel was built with
significant debugging options and EDMA driver is used with serial
console.
col-vf50 login: root
Password:
Login timed out after 60 seconds.
Unable to handle kernel NULL pointer dereference at virtual address 00000044
Internal error: Oops: 5 [#1] ARM
CPU: 0 PID: 157 Comm: login Not tainted 5.7.0-next-20200610-dirty #4
Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
(fsl_edma_tx_handler) from [<8016eb10>] (__handle_irq_event_percpu+0x64/0x304)
(__handle_irq_event_percpu) from [<8016eddc>] (handle_irq_event_percpu+0x2c/0x7c)
(handle_irq_event_percpu) from [<8016ee64>] (handle_irq_event+0x38/0x5c)
(handle_irq_event) from [<801729e4>] (handle_fasteoi_irq+0xa4/0x160)
(handle_fasteoi_irq) from [<8016ddcc>] (generic_handle_irq+0x34/0x44)
(generic_handle_irq) from [<8016e40c>] (__handle_domain_irq+0x54/0xa8)
(__handle_domain_irq) from [<80508bc8>] (gic_handle_irq+0x4c/0x80)
(gic_handle_irq) from [<80100af0>] (__irq_svc+0x70/0x98)
Exception stack(0x8459fe80 to 0x8459fec8)
fe80: 72286b00 e3359f64 00000001 0000412d a0070013 85c98840 85c98840 a0070013
fea0: 8054e0d4 00000000 00000002 00000000 00000002 8459fed0 8081fbe8 8081fbec
fec0: 60070013 ffffffff
(__irq_svc) from [<8081fbec>] (_raw_spin_unlock_irqrestore+0x30/0x58)
(_raw_spin_unlock_irqrestore) from [<8056cb48>] (uart_flush_buffer+0x88/0xf8)
(uart_flush_buffer) from [<80554e60>] (tty_ldisc_hangup+0x38/0x1ac)
(tty_ldisc_hangup) from [<8054c7f4>] (__tty_hangup+0x158/0x2bc)
(__tty_hangup) from [<80557b90>] (disassociate_ctty.part.1+0x30/0x23c)
(disassociate_ctty.part.1) from [<8011fc18>] (do_exit+0x580/0xba0)
(do_exit) from [<801214f8>] (do_group_exit+0x3c/0xb4)
(do_group_exit) from [<80121580>] (__wake_up_parent+0x0/0x14)
Issue looks like race condition between interrupt handler fsl_edma_tx_handler()
(called as result of fsl_edma_xfer_desc()) and terminating the transfer with
fsl_edma_terminate_all().
The fsl_edma_tx_handler() handles interrupt for a transfer with already freed
edesc and idle==true.
Fixes: d6be34fbd3 ("dma: Add Freescale eDMA engine driver support")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Robin Gong <yibin.gong@nxp.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1591877861-28156-2-git-send-email-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add lockdep assert for an exported function expected to be called under
spin lock. Since this function is called in different modules, the
lockdep assert will be self-documenting note about need for locking.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Robin Gong <yibin.gong@nxp.com>
Link: https://lore.kernel.org/r/1591877861-28156-1-git-send-email-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
if of_find_device_by_node() succeed and platform_get_drvdata() failed,
of_xudma_dev_get() will return without put_device(), which will leak
the memory.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20200618130110.582543-1-yukuai3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
A client driver (renesas_usbhs) assumed that
dmaengine_tx_status() could return the residue even if
the transfer was completed. However, this was not correct
usage [1] and this caused to break getting the residue after
the commit 24461d9792 ("dmaengine: virt-dma: Fix access after
free in vchan_complete()") actually. So, this is possible to get
wrong received size if the usb controller gets a short packet.
For example, g_zero driver causes "bad OUT byte" errors.
To use the tx_result from the renesas_usbhs driver when
the transfer is completed, set the tx_result parameters.
Notes that the renesas_usbhs driver needs to update for it.
[1]
https://lore.kernel.org/dmaengine/20200616165550.GP2324254@vkoul-mobl/
Reported-by: Hien Dang <hien.dang.eb@renesas.com>
Fixes: 24461d9792 ("dmaengine: virt-dma: Fix access after free in vchan_complete()")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1592482053-19433-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
INIT_DELAYED_WORK_ONSTACK() must be used with on-stack delayed work, which
is not the case here.
Use normal delayed_work for the channels instead.
Fixes: 25dcb5dd7b ("dmaengine: ti: New driver for K3 UDMA")
Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200618114004.6268-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
acpi_dev_get_resources() does perform the NULL pointer check against
ACPI companion device which is given as function parameter. Thus,
there is no need to duplicate this check in the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200622181311.67649-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Link: https://lore.kernel.org/r/20200617211135.GA8660@embeddedor
Signed-off-by: Vinod Koul <vkoul@kernel.org>
add the wq lock in cdev open and release call. This fixes
race conditions observed in the open and close routines.
Fixes: 42d279f913 ("dmaengine: idxd: add char driver to expose submission portal to userland")
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/159285824892.64944.2905413694915141834.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
event_id0 is defined as 'unsigned int', so it is always greater or
equal to zero.
Remove the unneeded comparisons to fix the following W=1 build
warning:
drivers/dma/imx-sdma.c: In function 'sdma_free_chan_resources':
drivers/dma/imx-sdma.c:1334:23: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
1334 | if (sdmac->event_id0 >= 0)
| ^~
drivers/dma/imx-sdma.c: In function 'sdma_config':
drivers/dma/imx-sdma.c:1635:23: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
1635 | if (sdmac->event_id0 >= 0) {
|
Fixes: 25962e1a7f ("dmaengine: imx-sdma: Fix the event id check to include RX event for UART6")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20200621155730.28766-1-festevam@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The cookie tracking in dmaengine expects all submissions completed in
order. Some DMA devices like Intel DSA can complete submissions out of
order, especially if configured with a work queue sharing multiple DMA
engines. Add a status DMA_OUT_OF_ORDER that tx_status can be returned for
those DMA devices. The user should use callbacks to track the completion
rather than the DMA cookie. This would address the issue of dmatest
complaining that descriptors are "busy" when the cookie count goes
backwards due to out of order completion. Add DMA_COMPLETION_NO_ORDER
DMA capability to allow the driver to flag the device's ability to complete
operations out of order.
Reported-by: Swathi Kovvuri <swathi.kovvuri@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Swathi Kovvuri <swathi.kovvuri@intel.com>
Link: https://lore.kernel.org/r/158939557151.20335.12404113976045569870.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On a MMP2, the DMA interrupt is shared by all channels of the peripheral
DMA controller and the audio DMA controller. Both drivers can identify
their interrupts, but only the PDMA driver marks the line shared:
[ 1.185782] mmp-pdma d4000000.dma: initialized 16 channels
[ 1.186808] mmp-tdma d42a0800.adma: IRQ index 1 not found
[ 1.194317] genirq: Flags mismatch irq 64. 00000000 (tdma) vs. 00000080 (pdma)
[ 1.197894] mmp-tdma: probe of d42a0800.adma failed with error -16
Let's turn on IRQF_SHARED in the ADMA driver as well.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200601192252.172773-1-lkundrak@v3.sk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When there's a single interrupt for all the DMA channels, the
unsuccessful attempt to request separate IRQs emits useless warnings:
[ 1.370381] mmp-pdma d4000000.dma: IRQ index 1 not found
...
[ 1.412398] mmp-pdma d4000000.dma: IRQ index 15 not found
[ 1.418308] mmp-pdma d4000000.dma: initialized 16 channels
Avoid that, treating the IRQs as optional.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200601192337.172869-1-lkundrak@v3.sk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
If PCI enumerated controller has a companion device,
register it in the ACPI DMA controllers as well.
Fixes: f7c799e950 ("dmaengine: dw: we do support Merrifield SoC in PCI mode")
Depends-on: b685fe26e9 ("dmaengine: dw: platform: Split ACPI helpers to separate module")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200526182416.52805-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In the unlikely case when the channel is running (RT enabled) during
alloc_chan_resources then we should use udma_reset_chan() and not
udma_stop() as the later is trying to initiate a teardown on the channel,
which is not valid at this point.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200527070612.636-3-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Some of the earlier errors should be sent to the error cleanup path to
make sure that the uchan struct is reset, the dma_pool (if allocated) is
released and memcpy channel pairs are released in a correct way.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200527070612.636-2-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The "ti,udma-atype" property is expected in the UDMA node and not in the
parent navss node.
Fixes: 0ebcf1a274 ("dmaengine: ti: k3-udma: Implement support for atype (for virtualization)")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200527065357.30791-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Bunch of updates to drivers like dmatest, dw-edma, ioat,
mmp-tdma and k3-udma along with Renesas binding update to json-schema
-----BEGIN PGP SIGNATURE-----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=Jun4
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.8-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"A fairly small dmaengine update which includes mostly driver updates
(dmatest, dw-edma, ioat, mmp-tdma and k3-udma) along with Renesas
binding update to json-schema"
* tag 'dmaengine-5.8-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (39 commits)
dmaengine: imx-sdma: initialize all script addresses
dmaengine: ti: k3-udma: Use proper return code in alloc_chan_resources
dmaengine: ti: k3-udma: Remove udma_chan.in_ring_cnt
dmaengine: ti: k3-udma: Add missing dma_sync call for rx flush descriptor
dmaengine: at_xdmac: Replace zero-length array with flexible-array
dmaengine: at_hdmac: Replace zero-length array with flexible-array
dmaengine: qcom: bam_dma: Replace zero-length array with flexible-array
dmaengine: ti: k3-udma: Use PTR_ERR_OR_ZERO() to simplify code
dmaengine: moxart-dma: Drop pointless static qualifier in moxart_probe()
dmaengine: sf-pdma: Simplify the error handling path in 'sf_pdma_probe()'
dmaengine: qcom_hidma: use true,false for bool variable
dmaengine: dw-edma: support local dma device transfer semantics
dmaengine: Fix doc strings to satisfy validation script
dmaengine: Include dmaengine.h into dmaengine.c
dmaengine: dmatest: Describe members of struct dmatest_info
dmaengine: dmatest: Describe members of struct dmatest_params
dmaengine: dmatest: Allow negative timeout value to specify infinite wait
Revert "dmaengine: dmatest: timeout value of -1 should specify infinite wait"
dmaengine: stm32-dma: direct mode support through device tree
dt-bindings: dma: add direct mode support through device tree in stm32-dma
...
Commit b53611fb1c ("dmaengine: tegra210-adma: Fix crash during probe")
has moved some code in the probe function and reordered the error handling
path accordingly.
However, a goto has been missed.
Fix it and goto the right label if 'dma_async_device_register()' fails, so
that all resources are released.
Fixes: b53611fb1c ("dmaengine: tegra210-adma: Fix crash during probe")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200516214205.276266-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The script addresses array increases with each new version. The driver
initializes the array to -EINVAL initially, but only up to the size
of the v1 array. Initialize the additional addresses for the newer
versions as well. Without this uninitialized values of the newer arrays
are treated as valid.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Robin Gong <yibin.gong@nxp.com>
Link: https://lore.kernel.org/r/20200513060405.18685-1-s.hauer@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In udma_alloc_chan_resources() if the channel is not willing to stop then
the function should return with error code.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200512134519.5642-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The TR mode rx flush descriptor did not had a dma_sync_single_for_device()
call to make sure that the DMA see the correct information.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200512134544.5839-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
cppi5_tr_csf_set() clears previously set Configuration Specific Flags.
Setting the EOP flag clears the SUPR_EVT flag for the last TR which is not
desirable as we do not want to have events from the TR.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200512134531.5742-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Ludovic Desroches<ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20200507190046.GA15298@embeddedor
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Ludovic Desroches<ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20200507190038.GA15272@embeddedor
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200508210707.GA24136@embeddedor
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes coccicheck warnings:
drivers/dma/ti/k3-udma.c:1294:1-3: WARNING: PTR_ERR_OR_ZERO can be used
drivers/dma/ti/k3-udma.c:1311:1-3: WARNING: PTR_ERR_OR_ZERO can be used
drivers/dma/ti/k3-udma.c:1376:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Samuel Zou <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1588757146-38858-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is no need to have the 'void __iomem *dma_base_addr' variable
static since new value always be assigned before use it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200505101353.195446-1-yuehaibing@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is no need to explicitly free memory that have been 'devm_kzalloc'ed.
Simplify the probe function accordingly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Green Wan <green.wan@sifive.com>
Reviewed-by: Green Wan <green.wan@sifive.com>
Link: https://lore.kernel.org/r/20200501100824.126534-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix the following coccicheck warning:
drivers/dma/qcom/hidma.c:553:1-17: WARNING: Assignment of 0/1 to bool
variable
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Acked By: Sinan Kaya <okaya@kernel.org>
Link: https://lore.kernel.org/r/20200504113406.41530-1-yanaijie@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In case of dmatest is built-in and no channel was configured test
doesn't run with:
dmatest: Could not start test, no channels configured
Even though description to "channel" parameter claims that default is
any.
Add default channel back as it used to be rather than reject test with
no channel configuration.
Fixes: d53513d5dc ("dmaengine: dmatest: Add support for multi channel testing)
Reported-by: Dijil Mohan <Dijil.Mohan@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Link: https://lore.kernel.org/r/20200429071522.58148-1-vladimir.murzin@arm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The current implementation may miss completions after we unmask the
interrupt. In order to make sure we process all competions, we need to:
1. Do an MMIO read from the device as a barrier to ensure that all PCI
writes for completions have arrived.
2. Check for any additional completions that we missed.
Fixes: 8f47d1a5e5 ("dmaengine: idxd: connect idxd to dmaengine subsystem")
Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/158834641769.35613.1341160109892008587.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When the kernel is built with lockdep support and the owl-dma driver is
used, the following message is shown:
[ 2.496939] INFO: trying to register non-static key.
[ 2.501889] the code is fine but needs lockdep annotation.
[ 2.507357] turning off the locking correctness validator.
[ 2.512834] CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.6.3+ #15
[ 2.519084] Hardware name: Generic DT based system
[ 2.523878] Workqueue: events_freezable mmc_rescan
[ 2.528681] [<801127f0>] (unwind_backtrace) from [<8010da58>] (show_stack+0x10/0x14)
[ 2.536420] [<8010da58>] (show_stack) from [<8080fbe8>] (dump_stack+0xb4/0xe0)
[ 2.543645] [<8080fbe8>] (dump_stack) from [<8017efa4>] (register_lock_class+0x6f0/0x718)
[ 2.551816] [<8017efa4>] (register_lock_class) from [<8017b7d0>] (__lock_acquire+0x78/0x25f0)
[ 2.560330] [<8017b7d0>] (__lock_acquire) from [<8017e5e4>] (lock_acquire+0xd8/0x1f4)
[ 2.568159] [<8017e5e4>] (lock_acquire) from [<80831fb0>] (_raw_spin_lock_irqsave+0x3c/0x50)
[ 2.576589] [<80831fb0>] (_raw_spin_lock_irqsave) from [<8051b5fc>] (owl_dma_issue_pending+0xbc/0x120)
[ 2.585884] [<8051b5fc>] (owl_dma_issue_pending) from [<80668cbc>] (owl_mmc_request+0x1b0/0x390)
[ 2.594655] [<80668cbc>] (owl_mmc_request) from [<80650ce0>] (mmc_start_request+0x94/0xbc)
[ 2.602906] [<80650ce0>] (mmc_start_request) from [<80650ec0>] (mmc_wait_for_req+0x64/0xd0)
[ 2.611245] [<80650ec0>] (mmc_wait_for_req) from [<8065aa10>] (mmc_app_send_scr+0x10c/0x144)
[ 2.619669] [<8065aa10>] (mmc_app_send_scr) from [<80659b3c>] (mmc_sd_setup_card+0x4c/0x318)
[ 2.628092] [<80659b3c>] (mmc_sd_setup_card) from [<80659f0c>] (mmc_sd_init_card+0x104/0x430)
[ 2.636601] [<80659f0c>] (mmc_sd_init_card) from [<8065a3e0>] (mmc_attach_sd+0xcc/0x16c)
[ 2.644678] [<8065a3e0>] (mmc_attach_sd) from [<8065301c>] (mmc_rescan+0x3ac/0x40c)
[ 2.652332] [<8065301c>] (mmc_rescan) from [<80143244>] (process_one_work+0x2d8/0x780)
[ 2.660239] [<80143244>] (process_one_work) from [<80143730>] (worker_thread+0x44/0x598)
[ 2.668323] [<80143730>] (worker_thread) from [<8014b5f8>] (kthread+0x148/0x150)
[ 2.675708] [<8014b5f8>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20)
[ 2.682912] Exception stack(0xee8fdfb0 to 0xee8fdff8)
[ 2.687954] dfa0: 00000000 00000000 00000000 00000000
[ 2.696118] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 2.704277] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
The obvious fix would be to use 'spin_lock_init()' on 'pchan->lock'
before attempting to call 'spin_lock_irqsave()' in 'owl_dma_get_pchan()'.
However, according to Manivannan Sadhasivam, 'pchan->lock' was supposed
to only protect 'pchan->vchan' while 'od->lock' does a similar job in
'owl_dma_terminate_pchan()'.
Therefore, this patch substitutes 'pchan->lock' with 'od->lock' and
removes the 'lock' attribute in 'owl_dma_pchan' struct.
Fixes: 47e20577c2 ("dmaengine: Add Actions Semi Owl family S900 DMA driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Andreas Färber <afaerber@suse.de>
Link: https://lore.kernel.org/r/c6e6cdaca252b5364bd294093673951036488cf0.1588439073.git.cristian.ciocaltea@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Modify dw_edma_device_transfer() to also support the semantics of dma
device transfer for additional use cases involving pcitest utility as a
local initiator.
For its original use case, dw-edma supported the semantics of dma device
transfer from the perspective of a remote initiator who is located across
the PCIe bus from dma channel hardware.
To a remote initiator, DMA_DEV_TO_MEM means using a remote dma WRITE
channel to transfer from remote memory to local memory. A WRITE channel
would be employed on the remote device in order to move the contents of
remote memory to the bus destined for local memory.
To a remote initiator, DMA_MEM_TO_DEV means using a remote dma READ
channel to transfer from local memory to remote memory. A READ channel
would be employed on the remote device in order to move the contents of
local memory to the bus destined for remote memory.
>From the perspective of a local dma initiator who is co-located on the
same side of the PCIe bus as the dma channel hardware, the semantics of
dma device transfer are flipped.
To a local initiator, DMA_DEV_TO_MEM means using a local dma READ channel
to transfer from remote memory to local memory. A READ channel would be
employed on the local device in order to move the contents of remote
memory to the bus destined for local memory.
To a local initiator, DMA_MEM_TO_DEV means using a local dma WRITE channel
to transfer from local memory to remote memory. A WRITE channel would be
employed on the local device in order to move the contents of local memory
to the bus destined for remote memory.
To support local dma initiators, dw_edma_device_transfer() is modified to
now examine the direction field of struct dma_slave_config for the channel
which initiators can configure by calling dmaengine_slave_config().
If direction is configured as either DMA_DEV_TO_MEM or DMA_MEM_TO_DEV,
local initiator semantics are used. If direction is a value other than
DMA_DEV_TO_MEM nor DMA_MEM_TO_DEV, then remote initiator semantics are
used. This should maintain backward compatibility with the original use
case of dw-edma.
The dw-edma-test utility is an example of a remote initiator. From reading
its patch, dw-edma-test does not specifically set the direction field of
struct dma_slave_config. Since dw_edma_device_transfer() also does not
check the direction field of struct dma_slave_config, it seems safe to use
this convention in dw-edma to support both local and remote initiator
semantics.
Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Link: https://lore.kernel.org/r/1588122633-1552-1-git-send-email-alan.mikhak@sifive.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The validation kernel doc script complains about undescribed
function parameters
.../dmaengine.c:155: warning: Function parameter or member 'dev' not descr ibed in 'dev_to_dma_chan'
.../dmaengine.c:251: warning: cannot understand function prototype: 'dma_cap_mask_t dma_cap_mask_all; '
.../dmaengine.c:257: warning: cannot understand function prototype: 'struct dma_chan_tbl_ent '
.../dmaengine.c:264: warning: cannot understand function prototype: 'struct dma_chan_tbl_ent __percpu *channel_table[DMA_TX_TYPE_END]; '
.../dmaengine.c:304: warning: Function parameter or member 'chan' not described in 'dma_chan_is_local'
.../dmaengine.c:304: warning: Function parameter or member 'cpu' not described in 'dma_chan_is_local'
.../dmaengine.c:414: warning: Function parameter or member 'chan' not described in 'balance_ref_count'
.../dmaengine.c:447: warning: Function parameter or member 'chan' not described in 'dma_chan_get'
.../dmaengine.c:494: warning: Function parameter or member 'chan' not described in 'dma_chan_put'
Add descriptions to the function parameters and in some cases update
existing text as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200429122151.50989-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
If we do
% echo 1 > /sys/module/dmatest/parameters/run
[ 115.851124] dmatest: Could not start test, no channels configured
% echo dma8chan7 > /sys/module/dmatest/parameters/channel
[ 127.563872] dmatest: Added 1 threads using dma8chan7
% cat /sys/module/dmatest/parameters/wait
... !!! HANG !!! ...
The culprit is the commit 6138f967bc
("dmaengine: dmatest: Use fixed point div to calculate iops")
which makes threads not to run, but pending and being kicked off by writing
to the 'run' node. However, it forgot to consider 'wait' routine to avoid
above mentioned case.
In order to fix this, check for really running threads, i.e. with pending
and done flags unset.
It's pity the culprit commit hadn't updated documentation and tested all
possible scenarios.
Fixes: 6138f967bc ("dmaengine: dmatest: Use fixed point div to calculate iops")
Cc: Seraj Alijan <seraj.alijan@sondrel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200428113518.70620-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The dmatest module parameter 'timeout' is documented as accepting a -1 to mean
"infinite timeout". However, an infinite timeout is not advised, nor possible
since the module parameter is an unsigned int, which won't accept a negative
value. Change the parameter type to be signed integer.
Cc: Gary Hook <Gary.Hook@amd.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200424161147.16895-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This reverts commit ed04b7c57c.
While it gives a good description what happens, the approach seems too
confusing. Let's fix it in the following patch.
Cc: Gary Hook <Gary.Hook@amd.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200424161147.16895-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Under some circumstances, i.e. when test is still running and about to
time out and user runs, for example,
grep -H . /sys/module/dmatest/parameters/*
the iterations parameter is not respected and test is going on and on until
user gives
echo 0 > /sys/module/dmatest/parameters/run
This is not what expected.
The history of this bug is interesting. I though that the commit
2d88ce76eb ("dmatest: add a 'wait' parameter")
is a culprit, but looking closer to the code I think it simple revealed the
broken logic from the day one, i.e. in the commit
0a2ff57d6f ("dmaengine: dmatest: add a maximum number of test iterations")
which adds iterations parameter.
So, to the point, the conditional of checking the thread to be stopped being
first part of conjunction logic prevents to check iterations. Thus, we have to
always check both conditions to be able to stop after given iterations.
Since it wasn't visible before second commit appeared, I add a respective
Fixes tag.
Fixes: 2d88ce76eb ("dmatest: add a 'wait' parameter")
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20200424161147.16895-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Direct mode or FIFO mode is computed by stm32-dma driver. Add a way for
the user to force direct mode, by setting bit 2 in the bitfield value
specifying DMA features in the device tree.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Link: https://lore.kernel.org/r/20200422102904.1448-3-amelie.delaunay@st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is no need to call 'hidma_debug_uninit()' in the error handling
path. 'hidma_debug_init()' has not been called yet.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200427111043.70218-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
DMA synchronization hook checks whether interrupt is raised by testing
corresponding bit in a hardware status register, and thus, clock should
be enabled in this case, otherwise CPU may hang if synchronization is
invoked while Runtime PM is in suspended state. This patch resumes the RPM
during of the DMA synchronization process in order to avoid potential
problems. It is a minor clean up of a previous commit, no real problem is
fixed by this patch because currently RPM is always in a resumed state
while DMA is synchronized, although this may change in the future.
Fixes: 6697255f23 ("dmaengine: tegra-apb: Improve DMA synchronization")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200426190835.21950-1-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We only support DMA_DEV_TO_MEM and DMA_MEM_TO_DEV. Let's not do
undefined things with other values and reject them.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200424215020.105281-1-lkundrak@v3.sk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Modify dw_edma_irq_request() to check if a struct msi_desc entry exists
before copying the contents of its struct msi_msg pointer.
Without this sanity check, __get_cached_msi_msg() crashes when invoked by
dw_edma_irq_request() running on a Linux-based PCIe endpoint device. MSI
interrupt are not received by PCIe endpoint devices. If irq_get_msi_desc()
returns null, then there is no cached struct msi_msg to be copied.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/1587607101-31914-1-git-send-email-alan.mikhak@sifive.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When the channel register code was changed to allow hotplug operations,
dynamic indexing wasn't taken into account. When channels are randomly
plugged and unplugged out of order, the serial indexing breaks. Convert
channel indexing to using IDA tracking in order to allow dynamic
assignment. The previous code does not cause any regression bug for
existing channel allocation besides idxd driver since the hotplug usage
case is only used by idxd at this point.
With this change, the chan->idr_ref is also not needed any longer. We can
have a device with no channels registered due to hot plug. The channel
device release code no longer should attempt to free the dma device id on
the last channel release.
Fixes: e81274cd6b ("dmaengine: add support to dynamic register/unregister of channels")
Reported-by: Yixin Zhang <yixin.zhang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Yixin Zhang <yixin.zhang@intel.com>
Link: https://lore.kernel.org/r/158679961260.7674.8485924270472851852.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
removing unnecessary mod_timer from timeout handler
incase of ioat_cleanup_preamble() is true for cleaner code
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Leonid Ravich <Leonid.Ravich@emc.com>
Link: https://lore.kernel.org/r/1587589761-32690-2-git-send-email-leonid.ravich@dell.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
A generic SRAM will driver for Device Tree enabled platforms will do as
well.
The non-DT drivers that use mmp_tdma to transfer audio samples to and from
the audio SRAM should depend on MMP_SRAM themselves.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200419164912.670973-8-lkundrak@v3.sk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This makes dma_get_slave_caps() work with the device so that it could
actually be used with soc-generic-dmaengine-pcm.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200419164912.670973-7-lkundrak@v3.sk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When a channel configuration fails, the status of the channel is set to
DEV_ERROR so that an attempt to submit it fails. However, this status
sticks until the heat end of the universe, making it impossible to
recover from the error.
Let's reset it when the channel is released so that further use of the
channel with correct configuration is not impacted.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200419164912.670973-5-lkundrak@v3.sk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Drop a redundant "mmp_tdma:" from some error messages. The dev_err()
appends mostly the same thing for us:
[ 120.756530] mmp-tdma d42a0800.adma: mmp_tdma: unknown burst size.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200419164912.670973-3-lkundrak@v3.sk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
With an invalid dma_slave_config set previously,
mmp_tdma_prep_dma_cyclic() would detect an error whilst configuring the
channel, but proceed happily on:
[ 120.756530] mmp-tdma d42a0800.adma: mmp_tdma: unknown burst size.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200419164912.670973-2-lkundrak@v3.sk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
pd->dma.dev is read in irq handler pd_irq().
However, it is set to pdev->dev after request_irq().
Therefore, set pd->dma.dev to pdev->dev before request_irq() to
avoid data race between pch_dma_probe() and pd_irq().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Link: https://lore.kernel.org/r/20200416062335.29223-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
requreing kmalloc of 2M high chance to fail in
fragmented memory.
IOAT ring requires 64k * 64B memory
which will be achived by 512k * 8 allocation
instead of 2M * 2.
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Leonid Ravich <Leonid.Ravich@emc.com>
Link: https://lore.kernel.org/r/20200416170628.16196-2-leonid.ravich@dell.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
changing macros which assumption is chunk size of 2M,
which can be other size
prepare for changing allocation chunk size.
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Leonid Ravich <Leonid.Ravich@emc.com>
Link: https://lore.kernel.org/r/20200416170628.16196-1-leonid.ravich@dell.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Decouple dw-edma-core.c from struct pci_dev as a step toward integration
of dw-edma with pci-epf-test so the latter can initiate dma operations
locally from the endpoint side. A barrier to such integration is the
dependency of dw_edma_probe() and other functions in dw-edma-core.c on
struct pci_dev.
The Synopsys DesignWare dw-edma driver was designed to run on host side
of PCIe link to initiate DMA operations remotely using eDMA channels of
PCIe controller on the endpoint side. This can be inferred from seeing
that dw-edma uses struct pci_dev and accesses hardware registers of dma
channels across the bus using BAR0 and BAR2.
The ops field of struct dw_edma in dw-edma-core.h is currenty undefined:
const struct dw_edma_core_ops *ops;
However, the kernel builds without failure even when dw-edma driver is
enabled. Instead of removing the currently undefined and usued ops field,
define struct dw_edma_core_ops and use the ops field to decouple
dw-edma-core.c from struct pci_dev.
Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/1586971629-30196-1-git-send-email-alan.mikhak@sifive.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Allen Pais