One more step on the merge of 'struct maps' with 'struct map_groups'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-61rra2wg392rhvdgw421wzpt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One more step on the merge of 'struct maps' with 'struct map_groups'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-foo95pyyp3bhocbt7yd8qrvq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One more step on the merge of 'struct maps' with 'struct map_groups'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-69vcr8pubpym90skxhmbwhiw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And fill it whenever we setup a a 'struct map_symbol', now we need to
use it, next cset.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-fzwfcnddenz1o7uj1fzw3g46@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To help in passing that info around to callchain routines that, for the
same reason, are moving to use 'struct map_symbol'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-epsiibeprpxa8qpwji47uskc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check that it is not needed and remove, fixing up some fallout for
places where it was only serving to get something else.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-9h6dg6lsqe2usyqjh5rrues4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can reduce the header dependency tree further, in the process
noticed that lots of places were getting even things like build-id
routines and 'struct perf_tool' definition indirectly, so fix all those
too.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ti0btma9ow5ndrytyoqdk62j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Eroding a bit more the tools/perf/util/util.h hodpodge header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-natazosyn9rwjka25tvcnyi0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Several places were using definitions found in symbols.h but not
including it, getting it by sheer luck from some other headers that now
are in the process of removing that include because they don't need it
or because simply having struct forward declarations is enough, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-xbcvvx296d70kpg9wb0qmeq9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Lots of places get the map.h file indirectly, and since we're going to
remove it from machine.h, then those need to include it directly, do it
now, before we remove that dep.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ob8jehdjda8h5jsrv9dqj9tf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf/data is recorded with the dwarf call-graph option, the
callchain shown by 'perf script' still shows the binary offsets of the
userspace symbols instead of their virtual addresses. Since the symbol
offset calculation is based on using virtual address as the ip, we see
incorrect offsets as well.
The use of virtual addresses affects the ability to find out the
line number in the corresponding source file to which an address
maps to as described in commit 6754075915 ("perf unwind: Use
addr_location::addr instead of ip for entries").
This has also been addressed by temporarily converting the virtual
address to the correponding binary offset so that it can be mapped
to the source line number correctly.
This is a follow-up for commit 1961018469 ("perf script: Show
virtual addresses instead of offsets").
This can be verified on a powerpc64le system running Fedora 27 as
shown below:
# perf probe -x /usr/lib64/libc-2.26.so -a inet_pton
# perf record -e probe_libc:inet_pton --call-graph=dwarf ping -6 -c 1 ::1
Before:
# perf report --stdio --no-children -s sym,srcline -g address
# Samples: 1 of event 'probe_libc:inet_pton'
# Event count (approx.): 1
#
# Overhead Symbol Source:Line
# ........ .................... ...........
#
100.00% [.] __GI___inet_pton inet_pton.c
|
---gaih_inet getaddrinfo.c:537 (inlined)
__GI_getaddrinfo getaddrinfo.c:2304 (inlined)
main ping.c:519
generic_start_main libc-start.c:308 (inlined)
__libc_start_main libc-start.c:102
...
# perf script -F comm,ip,sym,symoff,srcline,dso
ping
15af28 __GI___inet_pton+0xffff000099160008 (/usr/lib64/libc-2.26.so)
libc-2.26.so[ffff80004ca0af28]
10fa53 gaih_inet+0xffff000099160f43
libc-2.26.so[ffff80004c9bfa53] (inlined)
1105b3 __GI_getaddrinfo+0xffff000099160163
libc-2.26.so[ffff80004c9c05b3] (inlined)
2d6f main+0xfffffffd9f1003df (/usr/bin/ping)
ping[fffffffecf882d6f]
2369f generic_start_main+0xffff00009916013f
libc-2.26.so[ffff80004c8d369f] (inlined)
23897 __libc_start_main+0xffff0000991600b7 (/usr/lib64/libc-2.26.so)
libc-2.26.so[ffff80004c8d3897]
After:
# perf report --stdio --no-children -s sym,srcline -g address
# Samples: 1 of event 'probe_libc:inet_pton'
# Event count (approx.): 1
#
# Overhead Symbol Source:Line
# ........ .................... ...........
#
100.00% [.] __GI___inet_pton inet_pton.c
|
---gaih_inet.constprop.7 getaddrinfo.c:537
getaddrinfo getaddrinfo.c:2304
main ping.c:519
generic_start_main.isra.0 libc-start.c:308
__libc_start_main libc-start.c:102
...
# perf script -F comm,ip,sym,symoff,srcline,dso
ping
7fffb38aaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
inet_pton.c:68
7fffb385fa53 gaih_inet.constprop.7+0xf43 (/usr/lib64/libc-2.26.so)
getaddrinfo.c:537
7fffb38605b3 getaddrinfo+0x163 (/usr/lib64/libc-2.26.so)
getaddrinfo.c:2304
130782d6f main+0x3df (/usr/bin/ping)
ping.c:519
7fffb377369f generic_start_main.isra.0+0x13f (/usr/lib64/libc-2.26.so)
libc-start.c:308
7fffb3773897 __libc_start_main+0xb7 (/usr/lib64/libc-2.26.so)
libc-start.c:102
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Fixes: 6754075915 ("perf unwind: Use addr_location::addr instead of ip for entries")
Link: http://lkml.kernel.org/r/20180703120555.32971-1-sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We still have the split internally, but users don't see it anymore,
simplifying the growing number of cases where we end up searching
in the MAP__VARIABLE maps.
This further paves the way for ditching the split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-86mfxrztf310konutxvhr5ua@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was returning the searched map just on the addr_location passed, with
the function itself returning void.
Make it return the map so that we can make the code more compact.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-tzlrrzdeoof4i6ktyqv1t6ks@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of thread__find_addr_location(..., MAP__FUNCTION, ...), idea here is to
continue removing references to MAP__{FUNCTION,VARIABLE} ahead of
getting both types of symbols in the same rbtree, as various places do
two lookups, looking first at MAP__FUNCTION, then at MAP__VARIABLE.
So thread__find_symbol() will eventually do just that, and 'struct
symbol' will have the symbol type, for code that cares about that.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-n7528en9e08yd3flzmb26tth@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of thread__find_add_map(..., MAP__FUNCTION, ...), idea here is to
continue removing references to MAP__{FUNCTION,VARIABLE} ahead of
getting both types of symbols in the same rbtree, as various places do
two lookups, looking first at MAP__FUNCTION, then at MAP__VARIABLE.
So thread__find_map() will eventually do just that, and 'struct symbol'
will have the symbol type, for code that cares about that.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-q27xee34l4izpfau49w103s6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In verbose level 2, errors returned by libdw are reported in most cases,
but not when calling dwfl_attach_state.
Since elfutils v 0.160 (2014), dwfl_attach_state sets the error code to
report failure cause. On failure, log the reported error.
Signed-off-by: Martin Vuille <jpmv27@aim.com>
Reviewed-by: Kim Phillips <kim.phillips@arm.com>
Link: http://lkml.kernel.org/r/20180318175053.4222-1-jpmv27@aim.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Path passed to libdw for unwinding doesn't include symfs path
if specified, so unwinding fails because ELF file is not found.
Similar to unwinding with libunwind, pass symsrc_filename instead
of long_name. If there is no symsrc_filename, fallback to long_name.
Signed-off-by: Martin Vuille <jpmv27@aim.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20180211212420.18388-1-jpmv27@aim.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some situations the libdw unwinder stopped working properly. I.e.
with libunwind we see:
~~~~~
heaptrack_gui 2228 135073.400112: 641314 cycles:
e8ed _dl_fixup (/usr/lib/ld-2.25.so)
15f06 _dl_runtime_resolve_sse_vex (/usr/lib/ld-2.25.so)
ed94c KDynamicJobTracker::KDynamicJobTracker (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0)
608f3 _GLOBAL__sub_I_kdynamicjobtracker.cpp (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0)
f199 call_init.part.0 (/usr/lib/ld-2.25.so)
f2a5 _dl_init (/usr/lib/ld-2.25.so)
db9 _dl_start_user (/usr/lib/ld-2.25.so)
~~~~~
But with libdw and without this patch this sample is not properly
unwound:
~~~~~
heaptrack_gui 2228 135073.400112: 641314 cycles:
e8ed _dl_fixup (/usr/lib/ld-2.25.so)
15f06 _dl_runtime_resolve_sse_vex (/usr/lib/ld-2.25.so)
ed94c KDynamicJobTracker::KDynamicJobTracker (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0)
~~~~~
Debug output showed me that libdw found a module for the last frame
address, but it thinks it belongs to /usr/lib/ld-2.25.so. This patch
double-checks what libdw sees and what perf knows. If the mappings
mismatch, we now report the elf known to perf. This fixes the situation
above, and the libdw unwinder produces the same stack as libunwind.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20170602143753.16907-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As the documentation for dwfl_frame_pc says, frames that
are no activation frames need to have their program counter
decremented by one to properly find the function of the caller.
This fixes many cases where perf report currently attributes
the cost to the next line. I.e. I have code like this:
~~~~~~~~~~~~~~~
#include <thread>
#include <chrono>
using namespace std;
int main()
{
this_thread::sleep_for(chrono::milliseconds(1000));
this_thread::sleep_for(chrono::milliseconds(100));
this_thread::sleep_for(chrono::milliseconds(10));
return 0;
}
~~~~~~~~~~~~~~~
Now compile and record it:
~~~~~~~~~~~~~~~
g++ -std=c++11 -g -O2 test.cpp
echo 1 | sudo tee /proc/sys/kernel/sched_schedstats
perf record \
--event sched:sched_stat_sleep \
--event sched:sched_process_exit \
--event sched:sched_switch --call-graph=dwarf \
--output perf.data.raw \
./a.out
echo 0 | sudo tee /proc/sys/kernel/sched_schedstats
perf inject --sched-stat --input perf.data.raw --output perf.data
~~~~~~~~~~~~~~~
Before this patch, the report clearly shows the off-by-one issue.
Most notably, the last sleep invocation is incorrectly attributed
to the "return 0;" line:
~~~~~~~~~~~~~~~
Overhead Source:Line
........ ...........
100.00% core.c:0
|
---__schedule core.c:0
schedule
do_nanosleep hrtimer.c:0
hrtimer_nanosleep
sys_nanosleep
entry_SYSCALL_64_fastpath .tmp_entry_64.o:0
__nanosleep_nocancel .:0
std::this_thread::sleep_for<long, std::ratio<1l, 1000l> > thread:323
|
|--90.08%--main test.cpp:9
| __libc_start_main
| _start
|
|--9.01%--main test.cpp:10
| __libc_start_main
| _start
|
--0.91%--main test.cpp:13
__libc_start_main
_start
~~~~~~~~~~~~~~~
With this patch here applied, the issue is fixed. The report becomes
much more usable:
~~~~~~~~~~~~~~~
Overhead Source:Line
........ ...........
100.00% core.c:0
|
---__schedule core.c:0
schedule
do_nanosleep hrtimer.c:0
hrtimer_nanosleep
sys_nanosleep
entry_SYSCALL_64_fastpath .tmp_entry_64.o:0
__nanosleep_nocancel .:0
std::this_thread::sleep_for<long, std::ratio<1l, 1000l> > thread:323
|
|--90.08%--main test.cpp:8
| __libc_start_main
| _start
|
|--9.01%--main test.cpp:9
| __libc_start_main
| _start
|
--0.91%--main test.cpp:10
__libc_start_main
_start
~~~~~~~~~~~~~~~
Similarly it works for signal frames:
~~~~~~~~~~~~~~~
__noinline void bar(void)
{
volatile long cnt = 0;
for (cnt = 0; cnt < 100000000; cnt++);
}
__noinline void foo(void)
{
bar();
}
void sig_handler(int sig)
{
foo();
}
int main(void)
{
signal(SIGUSR1, sig_handler);
raise(SIGUSR1);
foo();
return 0;
}
~~~~~~~~~~~~~~~~
Before, the report wrongly points to `signal.c:29` after raise():
~~~~~~~~~~~~~~~~
$ perf report --stdio --no-children -g srcline -s srcline
...
100.00% signal.c:11
|
---bar signal.c:11
|
|--50.49%--main signal.c:29
| __libc_start_main
| _start
|
--49.51%--0x33a8f
raise .:0
main signal.c:29
__libc_start_main
_start
~~~~~~~~~~~~~~~~
With this patch in, the issue is fixed and we instead get:
~~~~~~~~~~~~~~~~
100.00% signal signal [.] bar
|
---bar signal.c:11
|
|--50.49%--main signal.c:29
| __libc_start_main
| _start
|
--49.51%--0x33a8f
raise .:0
main signal.c:27
__libc_start_main
_start
~~~~~~~~~~~~~~~~
Note how this patch fixes this issue for both unwinding methods, i.e.
both dwfl and libunwind. The former case is straight-forward thanks
to dwfl_frame_pc(). For libunwind, we replace the functionality via
unw_is_signal_frame() for any but the very first frame.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-4-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Disentangling util.h header mess a bit more.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-aj6je8ly377i4upedmjzdsq6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We've seen cases (softice) where DWARF unwinder went through non
executable mmaps, which we need to lookup in MAP__VARIABLE tree.
Reported-and-Tested-by: Noel Grandin <noelgrandin@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As reported by Milian, currently for DWARF unwind (both libdw and
libunwind) we display callchain in callee order only.
Adding the support to follow callchain order setup to libdw DWARF
unwinder, so we could get following output for report:
$ perf record --call-graph dwarf ls
...
$ perf report --no-children --stdio
21.12% ls libc-2.21.so [.] __strcoll_l
|
---__strcoll_l
mpsort_with_tmp
mpsort_with_tmp
mpsort_with_tmp
sort_files
main
__libc_start_main
_start
$ perf report --stdio --no-children -g caller
21.12% ls libc-2.21.so [.] __strcoll_l
|
---_start
__libc_start_main
main
sort_files
mpsort_with_tmp
mpsort_with_tmp
mpsort_with_tmp
__strcoll_l
Reported-and-Tested-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jan Kratochvil <jkratoch@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20151119130119.GA26617@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The unwind__get_entries() already receives the thread parameter, from where it can
obtain the matching machine structure, shorten the signature.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-isjc6bm8mv4612mhi6af64go@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So stop passing both machine and thread to several thread methods,
reducing function signature length.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ckcy19dcp1jfkmdihdjcqdn1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving pr_* debug macros to have it with in same object as debug
variables, becase we will change them to use verbose variable in next
patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1405374411-29012-3-git-send-email-jolsa@kernel.org
[ Add missing debug.h include in python scripting glue and in the libdw unwind lib ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Combine all definitions into a common tools/include/linux/types.h and
kill the wild growth elsewhere. Move DECLARE_BITMAP to its proper
bitmap.h header.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Link: http://lkml.kernel.org/n/tip-azczs7qcv6h9xek9od10hiv2@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Adding libdw DWARF post unwind support, which is part of
elfutils-devel/libdw-dev package from version 0.158.
The new code is contained in unwin-libdw.c object, and implements
unwind__get_entries unwind interface function.
New Makefile variable NO_LIBDW_DWARF_UNWIND was added to control its
compilation, and is marked as disabled now. It's factored with the rest
of the Makefile unwind build code in the next patch.
Arch specific code was added for x86.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392825179-5228-5-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo