We don't need the 3D validation stuff so it and all the related gunge can
depart. While we are at it prune some unused definitions.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The camera interface is also not covered (and we won't be using TTM anyway
even if it ever re-emerges) so it to can go
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
RAR registers are used on MID platforms for various protected video
playback activities using video playback engines we don't support.
So Rasputin can keep his Rars
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Grovel the firmware via the Moorestown interfaces and read the other bits
off the fuses.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For Moorestown we want to use the mrst LVDS setup not the Poulsbo setup
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Build the new files now all the changes they need are present. They won't
yet be used but the plumbing is next step.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Moorestown needs somewhere to stash various pipe config registers and the
firmware and fuse configurations
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We have a set of firmware passed descriptors and things we need to grovel
through for video configuration. This differs from the setup for the PC
style Poulsbo hardware.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We need these as they are also used by the Moorestown LVDS display support.
Make the various needed symbols visible in the headers
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add the new files needed for the GMA500 driver to support Moorestown LVDS
displays. Don't wire them in yet.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The Moorestown systems have some graphics differences we care about and some
we don't need to.
To start with it has a single pipe and that pipe can be used for LVDS
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This was empty code, WTF^pi.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These do not help in any way.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This has no functional changes.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There should be no need to assign the pm ops dynamically, so
assign them statically and make them const. While we are
doing this just do some simple code style cleanup on the
routines and move them above prior to their assignment
into the driver ops.
This has no functional change other than assigning the
pm ops statically.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Perhaps there was some good intention on having some platform
driver on ath6kl, but right now its pointless. Kill!
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No functional changes except renames of the routines and
id data structure.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removes verbose debug messages and checks that are just
not needed, and renames the functions to something more
sensible. While we clean this up, just move the routines
above and remove the forward declarations.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This will be passed along to the SDIO probe routine when
it fails. This will generate better error code to the user
when loading the module if it fails.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These map to do nothing.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This propagates initial platform registration failures and
also HIF initialization failures.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Make the code more legible by parsing the config options on
the header file. While a it ensure to propagate errors and
bail out if we fail to set btcoex params.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When CONFIG_ATH6KL_ENABLE_COEXISTENCE gets enabled we define
another flag called ENABLE_COEXISTENCE, just use
CONFIG_ATH6KL_ENABLE_COEXISTENCE since that is already defined
by the generated autoconf header file from the kernel.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There already is a CONFIG_AR600x_CUSTOM_XXX if this is
desired to be used.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When CONFIG_AR600x_SD32_XXX gets enabled we define
another flag called AR600x_SD32_XXX, just use
CONFIG_AR600x_SD32_XXX since that is already defined
by the generated autoconf header file from the kernel.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When CONFIG_AR600x_WB31_XXX gets enabled we define
another flag called AR600x_WB31_XXX, just use
CONFIG_AR600x_WB31_XXX since that is already defined
by the generated autoconf header file from the kernel.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When CONFIG_AR600x_SD31_XXX gets enabled we define
another flag called AR600x_SD31_XXX, just use
CONFIG_AR600x_SD31_XXX since that is already defined
by the generated autoconf header file from the kernel.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Since this is defined statically we just leave the code.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
All the code is used so just keep it and remove the static define.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is always set so just keep the code it idefs around.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is always defined so just keep the code.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This was enabled by default but its pretty useless for upstream
given that its sendign some custom wireless event. These need
to be reviewed instead and a respective cfg80211 event / call
should be used later.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is always enabled.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This removes all the wext and super extended ioctl crap.
The wext interfaces are already provided by cfg80211 and
the "private" ioctl stuff defined here is not even using
private wext, they are using netdev private ioctls!
This is completely unacceptable upstream. Die. Die Die.
As part of all this we end up removing the
CONFIG_HOST_GPIO_SUPPORT which ended up being heavily
abused by the internal ioctl work.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
To get upstream we can't use out of tree defines, kill
all the androidisms. ath6kl won't be usable on Android
unless external patches are supported later or Android
gets their shit together and gets all their crap upstream.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ath6kl used to have an internal PAL for Bluetooth 3.0 support
but this is no longer supported. The target used a WMI with an
ACL header for supporting these frames. Userspace would use
the ioctl AR6000_XIOCTL_ACL_DATA to send data to the target
and the firmware would generate ACL frames.
Remove both the parsing of the frames and the ioctl support.
We leave a warning for now for if the target generates some
sort of ACL data frame, later on we can remove this warning
once we have proven the target is no longer generating these
frames. It should be noted this also provides a fix for the
processing of spurious ACL data frames from the target,
previously they would not be dropped if they were generated
by the target but EXPORT_HCI_PAL_INTERFACE was not compiled
in.
Cc: Naveen Singh <nsingh@atheros.com>
Cc: Prerepa (Dham) Viswanadham <dham@atheros.com>
Cc: Shanmugamkamatchi Balashanmugam <sbalashanmugam@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The check for SET_NETDEV_DEV is not required given that
this is upstream. The setting of the SET_NETDEV_DEV with
the osDevInfo.pOSDevice is redundant for the cfg80211 case
as this was already being done, so just set the netdev device
for the non-cfg80211 which was missing.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is not required.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This unwraps the do while loops in favor for function helpers.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When something fails we set up some generic error values,
instead keep the values from the callers and make sure to
pass them on.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Leave the code in place as this is always defined statically.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
for i in $(find ./drivers/staging/ath6kl/ -name \*.[ch]) ; do \
sed -r -i -e "s/A_FREE/kfree/g" $i; done
Tested-by: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
They are unused since commit a22517fec0b13b5813932a3583a2b11a2ee17f5d:
Staging: w35und: remove dead code from mto.c
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fix some code style warnings found by the checkpatch.pl script, changing spaces for a tab
Signed-off-by: Chihau Chau <chihau@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox