Implement the exchange_id operation confoming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-28
Based on the client provided name, hash a client id.
If a confirmed one is found, compare the op's creds and
verifier. If the creds match and the verifier is different
then expire the old client (client re-incarnated), otherwise,
if both match, assume it's a replay and ignore it.
If an unconfirmed client is found, then copy the new creds
and verifer if need update, otherwise assume replay.
The client is moved to a confirmed state on create_session.
In the nfs41 branch set the exchange_id flags to
EXCHGID4_FLAG_USE_NON_PNFS | EXCHGID4_FLAG_SUPP_MOVED_REFER
(pNFS is not supported, Referrals are supported,
Migration is not.).
Address various scenarios from section 18.35 of the spec:
1. Check for EXCHGID4_FLAG_UPD_CONFIRMED_REC_A and set
EXCHGID4_FLAG_CONFIRMED_R as appropriate.
2. Return error codes per 18.35.4 scenarios.
3. Update client records or generate new client ids depending on
scenario.
Note: 18.35.4 case 3 probably still needs revisiting. The handling
seems not quite right.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Andy Adamosn <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: use utsname for major_id (and copy to server_scope)]
[nfsd41: fix handling of various exchange id scenarios]
Signed-off-by: Mike Sager <sager@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: reverse use of EXCHGID4_INVAL_FLAG_MASK_A]
[simplify nfsd4_encode_exchange_id error handling]
[nfsd41: embed an xdr_netobj in nfsd4_exchange_id]
[nfsd41: return nfserr_serverfault for spa_how == SP4_MACH_CRED]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Define nfsd41_dec_ops vector and add it to nfsd4_minorversion for
minorversion 1.
Note: nfsd4_enc_ops vector is shared for v4.0 and v4.1
since we don't need to filter out obsolete ops as this is
done in the decoding phase.
exchange_id, create_session, destroy_session, and sequence ops are
implemented as stubs returning nfserr_opnotsupp at this stage.
[was nfsd41: xdr stubs]
[get rid of CONFIG_NFSD_V4_1]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Simple sessionid hashing using its monotonically increasing sequence number.
Locking considerations:
sessionid_hashtbl access is controlled by the sessionid_lock spin lock.
It must be taken for insert, delete, and lookup.
nfsd4_sequence looks up the session id and if the session is found,
it calls nfsd4_get_session (still under the sessionid_lock).
nfsd4_destroy_session calls nfsd4_put_session after unhashing
it, so when the session's kref reaches zero it's going to get freed.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[we don't use a prime for sessionid hash table size]
[use sessionid_lock spin lock]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This patch provides basic data structures representing the nfs41
sessions and slots, plus helpers for keeping a reference count
on the session and freeing it.
Note that our server only support a headerpadsz of 0 and
it ignores backchannel attributes at the moment.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: remove headerpadsz from channel attributes]
[nfsd41: embed nfsd4_channel in nfsd4_session]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: use bool inuse for slot state]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41 remove sl_session from nfsd4_slot]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
On an NFSv4.1 server cache miss that causes an upcall, NFS4ERR_DELAY will be
returned. It is up to the NFSv4.1 client to resend only the operations that
have not been processed.
Initialize rq_usedeferral to 1 in svc_process(). It sill be turned off in
nfsd4_proc_compound() only when NFSv4.1 Sessions are used.
Note: this isn't an adequate solution on its own. It's acceptable as a way
to get some minimal 4.1 up and working, but we're going to have to find a
way to avoid returning DELAY in all common cases before 4.1 can really be
considered ready.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: reverse rq_nodeferral negative logic]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[sunrpc: initialize rq_usedeferral]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
Remove two unneeded exports and make two symbols static in fs/mpage.c
Cleanup after commit 585d3bc06f
Trim includes of fdtable.h
Don't crap into descriptor table in binfmt_som
Trim includes in binfmt_elf
Don't mess with descriptor table in load_elf_binary()
Get rid of indirect include of fs_struct.h
New helper - current_umask()
check_unsafe_exec() doesn't care about signal handlers sharing
New locking/refcounting for fs_struct
Take fs_struct handling to new file (fs/fs_struct.c)
Get rid of bumping fs_struct refcount in pivot_root(2)
Kill unsharing fs_struct in __set_personality()
Pure code move; two new helper functions for nfsd and daemonize
(unshare_fs_struct() and daemonize_fs_struct() resp.; for now -
the same code as used to be in callers). unshare_fs_struct()
exported (for nfsd, as copy_fs_struct()/exit_fs() used to be),
copy_fs_struct() and exit_fs() don't need exports anymore.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Remove the allocation of struct nfsd4_compound_state.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Since an RPC service listener's protocol family is specified now via
svc_create_xprt(), it no longer needs to be passed to svc_create() or
svc_create_pooled(). Remove that argument from the synopsis of those
functions, and remove the sv_family field from the svc_serv struct.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The sv_family field is going away. Pass a protocol family argument to
svc_create_xprt() instead of extracting the family from the passed-in
svc_serv struct.
Again, as this is a listener socket and not an address, we make this
new argument an "int" protocol family, instead of an "sa_family_t."
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Make sure port value read from user space by write_ports is valid before
passing it to svc_find_xprt(). If it wasn't, the writer would get ENOENT
instead of EINVAL.
Noticed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-quota-2.6: (27 commits)
ext2: Zero our b_size in ext2_quota_read()
trivial: fix typos/grammar errors in fs/Kconfig
quota: Coding style fixes
quota: Remove superfluous inlines
quota: Remove uppercase aliases for quota functions.
nfsd: Use lowercase names of quota functions
jfs: Use lowercase names of quota functions
udf: Use lowercase names of quota functions
ufs: Use lowercase names of quota functions
reiserfs: Use lowercase names of quota functions
ext4: Use lowercase names of quota functions
ext3: Use lowercase names of quota functions
ext2: Use lowercase names of quota functions
ramfs: Remove quota call
vfs: Use lowercase names of quota functions
quota: Remove dqbuf_t and other cleanups
quota: Remove NODQUOT macro
quota: Make global quota locks cacheline aligned
quota: Move quota files into separate directory
ext4: quota reservation for delayed allocation
...
* 'bkl-removal' of git://git.lwn.net/linux-2.6:
Rationalize fasync return values
Move FASYNC bit handling to f_op->fasync()
Use f_lock to protect f_flags
Rename struct file->f_ep_lock
Use lowercase names of quota functions instead of old uppercase ones.
CC: bfields@fieldses.org
CC: neilb@suse.de
Signed-off-by: Jan Kara <jack@suse.cz>
There is an inconsistency seen in the behaviour of nfs compared to other local
filesystems on linux when changing owner or group of a directory. If the
directory has SUID/SGID flags set, on changing owner or group on the directory,
the flags are stripped off on nfs. These flags are maintained on other
filesystems such as ext3.
To reproduce on a nfs share or local filesystem, run the following commands
mkdir test; chmod +s+g test; chown user1 test; ls -ld test
On the nfs share, the flags are stripped and the output seen is
drwxr-xr-x 2 user1 root 4096 Feb 23 2009 test
On other local filesystems(ex: ext3), the flags are not stripped and the output
seen is
drwsr-sr-x 2 user1 root 4096 Feb 23 13:57 test
chown_common() called from sys_chown() will only strip the flags if the inode is
not a directory.
static int chown_common(struct dentry * dentry, uid_t user, gid_t group)
{
..
if (!S_ISDIR(inode->i_mode))
newattrs.ia_valid |=
ATTR_KILL_SUID | ATTR_KILL_SGID | ATTR_KILL_PRIV;
..
}
See: http://www.opengroup.org/onlinepubs/7990989775/xsh/chown.html
"If the path argument refers to a regular file, the set-user-ID (S_ISUID) and
set-group-ID (S_ISGID) bits of the file mode are cleared upon successful return
from chown(), unless the call is made by a process with appropriate privileges,
in which case it is implementation-dependent whether these bits are altered. If
chown() is successfully invoked on a file that is not a regular file, these
bits may be cleared. These bits are defined in <sys/stat.h>."
The behaviour as it stands does not appear to violate POSIX. However the
actions performed are inconsistent when comparing ext3 and nfs.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The spec allows clients to change ip address, so we shouldn't be
requiring that setclientid always come from the same address. For
example, a client could reboot and get a new dhcpd address, but still
present the same clientid to the server. In that case the server should
revoke the client's previous state and allow it to continue, instead of
(as it currently does) returning a CLID_INUSE error.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Add /proc/fs/nfsd/pool_stats to export to userspace various
statistics about the operation of rpc server thread pools.
This patch is based on a forward-ported version of
knfsd-add-pool-thread-stats which has been shipping in the SGI
"Enhanced NFS" product since 2006 and which was previously
posted:
http://article.gmane.org/gmane.linux.nfs/10375
It has also been updated thus:
* moved EXPORT_SYMBOL() to near the function it exports
* made the new struct struct seq_operations const
* used SEQ_START_TOKEN instead of ((void *)1)
* merged fix from SGI PV 990526 "sunrpc: use dprintk instead of
printk in svc_pool_stats_*()" by Harshula Jayasuriya.
* merged fix from SGI PV 964001 "Crash reading pool_stats before
nfsds are started".
Signed-off-by: Greg Banks <gnb@sgi.com>
Signed-off-by: Harshula Jayasuriya <harshula@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Stop gathering the data that feeds the 'th' line in /proc/net/rpc/nfsd
because the questionable data provided is not worth the scalability
impact of calculating it. Instead, always report zeroes. The current
approach suffers from three major issues:
1. update_thread_usage() increments buckets by call service
time or call arrival time...in jiffies. On lightly loaded
machines, call service times are usually < 1 jiffy; on
heavily loaded machines call arrival times will be << 1 jiffy.
So a large portion of the updates to the buckets are rounded
down to zero, and the histogram is undercounting.
2. As seen previously on the nfs mailing list, the format in which
the histogram is presented is cryptic, difficult to explain,
and difficult to use.
3. Updating the histogram requires taking a global spinlock and
dirtying the global variables nfsd_last_call, nfsd_busy, and
nfsdstats *twice* on every RPC call, which is a significant
scaling limitation.
Testing on a 4 CPU 4 NIC Altix using 4 IRIX clients each doing
1K streaming reads at full line rate, shows the stats update code
(inlined into nfsd()) takes about 1.7% of each CPU. This patch drops
the contribution from nfsd() into the profile noise.
This patch is a forward-ported version of knfsd-remove-nfsd-threadstats
which has been shipping in the SGI "Enhanced NFS" product since 2006.
In that time, exactly one customer has noticed that the threadstats
were missing. It has been previously posted:
http://article.gmane.org/gmane.linux.nfs/10376
and more recently requested to be posted again.
Signed-off-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The main nfsd code was recently modified to no longer do lookups from
withing the readdir callback, to avoid locking problems on certain
filesystems.
This (rather hacky, and overdue for replacement) NFSv4 recovery code has
the same problem. Fix it to build up a list of names (instead of
dentries) and do the lookups afterwards.
Reported symptoms were a deadlock in the xfs code (called from
nfsd4_recdir_load), with /var/lib/nfs on xfs.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Reported-by: David Warren <warren@atmos.washington.edu>
Currently putpubfh returns NFSERR_OPNOTSUPP, which isn't actually
allowed for v4. The right error is probably NFSERR_NOTSUPP.
But let's just implement it; though rarely seen, it can be used by
Solaris (with a special mount option), is mandated by the rfc, and is
trivial for us to support.
Thanks to Yang Hongyang for pointing out the original problem, and to
Mike Eisler, Tom Talpey, Trond Myklebust, and Dave Noveck for further
argument....
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
If a filesystem being written to via NFS returns a short write count
(as opposed to an error) to nfsd, nfsd treats that as a success for
the entire write, rather than the short count that actually succeeded.
For example, given a 8192 byte write, if the underlying filesystem
only writes 4096 bytes, nfsd will ack back to the nfs client that all
8192 bytes were written. The nfs client does have retry logic for
short writes, but this is never called as the client is told the
complete write succeeded.
There are probably other ways it could happen, but in my case it
happened with a fuse (filesystem in userspace) filesystem which can
rather easily have a partial write.
Here is a patch to properly return the short write count to the
client.
Signed-off-by: David Shaw <dshaw@jabberwocky.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Thanks for Bill Baker at sun.com for catching this
at Connectathon 2009.
This bug was introduced in 2.6.27
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The errors returned aren't used. Just return 0 and make them available
to a dprintk(). Also, consistently use -ERRNO errors instead of nfs
errors.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Reviewed-by: Benny Halevy <bhalevy@panasas.com>
As part of reducing the scope of the client_mutex, and in order to
remove the need for mutexes from the callback code (so that callbacks
can be done as asynchronous rpc calls), move manipulations of the
file_hashtable under the recall_lock.
Update the relevant comments while we're here.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Alexandros Batsakis <batsakis@netapp.com>
Reviewed-by: Benny Halevy <bhalevy@panasas.com>
Since free_client() is guaranteed to only be called once, and to only
touch the client structure itself (not any common data structures), it
has no need for the state lock.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Alexandros Batsakis <batsakis@netapp.com>
Previous cleanup reveals an obvious (though harmless) bug: when
delegreturn gets a stateid that isn't for a delegation, it should return
an error rather than doing nothing.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Delegreturn is enough a special case for preprocess_stateid_op to
warrant just open-coding it in delegreturn.
There should be no change in behavior here; we're just reshuffling code.
Thanks to Yang Hongyang for catching a critical typo.
Reviewed-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
I can't recall ever seeing these printk's used to debug a problem. I'll
happily put them back if we see a case where they'd be useful. (Though
if we do that the find_XXX() errors would probably be better
reported in find_XXX() functions themselves.)
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Note that we exit this first big "if" with stp == NULL if and only if we
took the first branch; therefore, the second "if" is redundant, and we
can just combine the two, simplifying the logic.
Reviewed-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
sometimes HPUX nfs client sends a create request to linux nfs server(v2/v3).
the dump of the request is like:
obj_attributes
mode: value follows
set_it: value follows (1)
mode: 00
uid: no value
set_it: no value (0)
gid: value follows
set_it: value follows (1)
gid: 8030
size: value follows
set_it: value follows (1)
size: 0
atime: don't change
set_it: don't change (0)
mtime: don't change
set_it: don't change (0)
note that mode is 00(havs no rwx privilege even for the owner) and it requires
to set size to 0.
as current nfsd(v2/v3) implementation, the server does mainly 2 steps:
1) creates the file in mode specified by calling vfs_create().
2) sets attributes for the file by calling nfsd_setattr().
at step 2), it finally calls file system specific setattr() function which may
fail when checking permission because changing size needs WRITE privilege but
it has none since mode is 000.
for this case, a new file created, we may simply ignore the request of
setting size to 0, so that WRITE privilege is not needed and the open
succeeds.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
--
vfs.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
not having the state locked before putting the client/delegation causes a bug.
Also removed the comment from the function header about the state being already locked
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The use of |= is confusing--the bitmask is always initialized to zero in
this case, so we're effectively just doing an assignment here.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Enable NFSD only when FILE_LOCKING is enabled, since we don't want to
support NFSD without FILE_LOCKING.
Signed-off-by: Manish Katiyar <mkatiyar@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
MSDOS_SUPER_MAGIC is defined in <linux/magic.h>,
so use MSDOS_SUPER_MAGIC directly.
Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The caller always knows specifically whether it's releasing a lockowner
or an openowner, and the code is simpler if we use separate functions
(and the apparent recursion is gone).
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The flags here attempt to make the code more general, but I find it
actually just adds confusion.
I think it's clearer to separate the logic for the open and lock cases
entirely. And eventually we may want to separate the stateowner and
stateid types as well, as many of the fields aren't shared between the
lock and open cases.
Also move to eliminate forward references.
Start with the stateid's.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Reviewed-by: Benny Halevy <bhalevy@panasas.com>
Although this operation is unsupported by our implementation
we still need to provide an encode routine for it to
merely encode its (error) status back in the compound reply.
Thanks for Bill Baker at sun.com for testing with the Sun
OpenSolaris' client, finding, and reporting this bug at
Connectathon 2009.
This bug was introduced in 2.6.27
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Traditionally, changes to struct file->f_flags have been done under BKL
protection, or with no protection at all. This patch causes all f_flags
changes after file open/creation time to be done under protection of
f_lock. This allows the removal of some BKL usage and fixes a number of
longstanding (if microscopic) races.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
nfsd4_lockt does a search for a lockstateowner when building the lock
struct to test. If one is found, it'll set fl_owner to it. Regardless of
whether that happens, it'll also set fl_lmops. Given that this lock is
basically a "lightweight" lock that's just used for checking conflicts,
setting fl_lmops is probably not appropriate for it.
This behavior exposed a bug in DLM's GETLK implementation where it
wasn't clearing out the fields in the file_lock before filling in
conflicting lock info. While we were able to fix this in DLM, it
still seems pointless and dangerous to set the fl_lmops this way
when we may have a NULL lockstateowner.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@pig.fieldses.org>
Since override_creds() took its own reference on new, we need to release
our own reference.
(Note the put_cred on the return value puts the *old* value of
current->creds, not the new passed-in value).
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
refactor the nfs4 server lock code to use last_byte_offset
to compute the last byte covered by the lock. Check for overflow
so that the last byte is set to NFS4_MAX_UINT64 if offset + len
wraps around.
Also, use NFS4_MAX_UINT64 for ~(u64)0 where appropriate.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
There's no use for nfs4_cb_null_ops's declaration in fs/nfsd/nfs4callback.c
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
When determining the fsid_type in fh_compose(), the setting of the FID
via fsid= export option needs to take precedence over using the UUID
device id.
Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
A number of nfsd operations depend on the i_mutex to cover more code
than just the fsync, so the approach of 4c728ef583 "add a vfs_fsync
helper" doesn't work for nfsd. Revert the parts of those patches that
touch nfsd.
Note: we can't, however, remove the logic from vfs_fsync that was needed
only for the special case of nfsd, because a vfs_fsync(NULL,...) call
can still result indirectly from a stackable filesystem that was called
by nfsd. (Thanks to Christoph Hellwig for pointing this out.)
Reported-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Fix a regression in NFSD's permission checking introduced by the credentials
patches. There are two parts to the problem, both in nfsd_setuser():
(1) The return value of set_groups() is -ve if in error, not 0, and should be
checked appropriately. 0 indicates success.
(2) The UID to use for fs accesses is in new->fsuid, not new->uid (which is
0). This causes CAP_DAC_OVERRIDE to always be set, rather than being
cleared if the UID is anything other than 0 after squashing.
Reported-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Since nfsv4 allows LOCKT without an open, but the ->lock() method is a
file method, we fake up a struct file in the nfsv4 code with just the
fields we need initialized. But we forgot to initialize the file
operations, with the result that LOCKT never results in a call to the
filesystem's ->lock() method (if it exists).
We could just add that one more initialization. But this hack of faking
up a struct file with only some fields initialized seems the kind of
thing that might cause more problems in the future. We should either do
an open and get a real struct file, or make lock-testing an inode (not a
file) method.
This patch does the former.
Reported-by: Marc Eshel <eshel@almaden.ibm.com>
Tested-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Document the NFSD sysctl interface laid out in fs/nfsd/nfsctl.c.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: Instead of open-coding 2049, use the NFS_PORT macro.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: Rename recently-added failover functions to match the naming
convention in fs/nfsd/nfsctl.c.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
cksum.data is not freed up in one error case. Compile tested.
Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Minor cleanup/rewrite of find_stateid. Compile tested.
Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Fsync currently has a fdatawrite/fdatawait pair around the method call,
and a mutex_lock/unlock of the inode mutex. All callers of fsync have
to duplicate this, but we have a few and most of them don't quite get
it right. This patch adds a new vfs_fsync that takes care of this.
It's a little more complicated as usual as ->fsync might get a NULL file
pointer and just a dentry from nfsd, but otherwise gets afile and we
want to take the mapping and file operations from it when it is there.
Notes on the fsync callers:
- ecryptfs wasn't calling filemap_fdatawrite / filemap_fdatawait on the
lower file
- coda wasn't calling filemap_fdatawrite / filemap_fdatawait on the host
file, and returning 0 when ->fsync was missing
- shm wasn't calling either filemap_fdatawrite / filemap_fdatawait nor
taking i_mutex. Now given that shared memory doesn't have disk
backing not doing anything in fsync seems fine and I left it out of
the vfs_fsync conversion for now, but in that case we might just
not pass it through to the lower file at all but just call the no-op
simple_sync_file directly.
[and now actually export vfs_fsync]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We used to have rather schizophrenic set of checks for NULL ->i_op even
though it had been eliminated years ago. You'd need to go out of your
way to set it to NULL explicitly _and_ a bunch of code would die on
such inodes anyway. After killing two remaining places that still
did that bogosity, all that crap can go away.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits)
net: Allow dependancies of FDDI & Tokenring to be modular.
igb: Fix build warning when DCA is disabled.
net: Fix warning fallout from recent NAPI interface changes.
gro: Fix potential use after free
sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
sfc: When disabling the NIC, close the device rather than unregistering it
sfc: SFT9001: Add cable diagnostics
sfc: Add support for multiple PHY self-tests
sfc: Merge top-level functions for self-tests
sfc: Clean up PHY mode management in loopback self-test
sfc: Fix unreliable link detection in some loopback modes
sfc: Generate unique names for per-NIC workqueues
802.3ad: use standard ethhdr instead of ad_header
802.3ad: generalize out mac address initializer
802.3ad: initialize ports LACPDU from const initializer
802.3ad: remove typedef around ad_system
802.3ad: turn ports is_individual into a bool
802.3ad: turn ports is_enabled into a bool
802.3ad: make ntt bool
ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.
...
Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due
to the conversion to %pI (in this networking merge) and the addition of
doing IPv6 addresses (from the earlier merge of CIFS).
This patch adds server-side support for callbacks other than AUTH_SYS.
Signed-off-by: Olga Kornievskaia <aglo@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The rpc client needs to know the principal that the setclientid was done
as, so it can tell gssd who to authenticate to.
Signed-off-by: Olga Kornievskaia <aglo@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Two principals are involved in krb5 authentication: the target, who we
authenticate *to* (normally the name of the server, like
nfs/server.citi.umich.edu@CITI.UMICH.EDU), and the source, we we
authenticate *as* (normally a user, like bfields@UMICH.EDU)
In the case of NFSv4 callbacks, the target of the callback should be the
source of the client's setclientid call, and the source should be the
nfs server's own principal.
Therefore we allow svcgssd to pass down the name of the principal that
just authenticated, so that on setclientid we can store that principal
name with the new client, to be used later on callbacks.
Signed-off-by: Olga Kornievskaia <aglo@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Conflicts:
fs/nfsd/nfs4recover.c
Manually fixed above to use new creds API functions, e.g.
nfs4_save_creds().
Signed-off-by: James Morris <jmorris@namei.org>
If nfsd was shut down before the grace period ended, we could end up
with a freed object still on grace_list. Thanks to Jeff Moyer for
reporting the resulting list corruption warnings.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Tested-by: Jeff Moyer <jmoyer@redhat.com>
Conflicts:
security/keys/internal.h
security/keys/process_keys.c
security/keys/request_key.c
Fixed conflicts above by using the non 'tsk' versions.
Signed-off-by: James Morris <jmorris@namei.org>
Differentiate the objective and real subjective credentials from the effective
subjective credentials on a task by introducing a second credentials pointer
into the task_struct.
task_struct::real_cred then refers to the objective and apparent real
subjective credentials of a task, as perceived by the other tasks in the
system.
task_struct::cred then refers to the effective subjective credentials of a
task, as used by that task when it's actually running. These are not visible
to the other tasks in the system.
__task_cred(task) then refers to the objective/real credentials of the task in
question.
current_cred() refers to the effective subjective credentials of the current
task.
prepare_creds() uses the objective creds as a base and commit_creds() changes
both pointers in the task_struct (indeed commit_creds() requires them to be the
same).
override_creds() and revert_creds() change the subjective creds pointer only,
and the former returns the old subjective creds. These are used by NFSD,
faccessat() and do_coredump(), and will by used by CacheFiles.
In SELinux, current_has_perm() is provided as an alternative to
task_has_perm(). This uses the effective subjective context of current,
whereas task_has_perm() uses the objective/real context of the subject.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
Inaugurate copy-on-write credentials management. This uses RCU to manage the
credentials pointer in the task_struct with respect to accesses by other tasks.
A process may only modify its own credentials, and so does not need locking to
access or modify its own credentials.
A mutex (cred_replace_mutex) is added to the task_struct to control the effect
of PTRACE_ATTACHED on credential calculations, particularly with respect to
execve().
With this patch, the contents of an active credentials struct may not be
changed directly; rather a new set of credentials must be prepared, modified
and committed using something like the following sequence of events:
struct cred *new = prepare_creds();
int ret = blah(new);
if (ret < 0) {
abort_creds(new);
return ret;
}
return commit_creds(new);
There are some exceptions to this rule: the keyrings pointed to by the active
credentials may be instantiated - keyrings violate the COW rule as managing
COW keyrings is tricky, given that it is possible for a task to directly alter
the keys in a keyring in use by another task.
To help enforce this, various pointers to sets of credentials, such as those in
the task_struct, are declared const. The purpose of this is compile-time
discouragement of altering credentials through those pointers. Once a set of
credentials has been made public through one of these pointers, it may not be
modified, except under special circumstances:
(1) Its reference count may incremented and decremented.
(2) The keyrings to which it points may be modified, but not replaced.
The only safe way to modify anything else is to create a replacement and commit
using the functions described in Documentation/credentials.txt (which will be
added by a later patch).
This patch and the preceding patches have been tested with the LTP SELinux
testsuite.
This patch makes several logical sets of alteration:
(1) execve().
This now prepares and commits credentials in various places in the
security code rather than altering the current creds directly.
(2) Temporary credential overrides.
do_coredump() and sys_faccessat() now prepare their own credentials and
temporarily override the ones currently on the acting thread, whilst
preventing interference from other threads by holding cred_replace_mutex
on the thread being dumped.
This will be replaced in a future patch by something that hands down the
credentials directly to the functions being called, rather than altering
the task's objective credentials.
(3) LSM interface.
A number of functions have been changed, added or removed:
(*) security_capset_check(), ->capset_check()
(*) security_capset_set(), ->capset_set()
Removed in favour of security_capset().
(*) security_capset(), ->capset()
New. This is passed a pointer to the new creds, a pointer to the old
creds and the proposed capability sets. It should fill in the new
creds or return an error. All pointers, barring the pointer to the
new creds, are now const.
(*) security_bprm_apply_creds(), ->bprm_apply_creds()
Changed; now returns a value, which will cause the process to be
killed if it's an error.
(*) security_task_alloc(), ->task_alloc_security()
Removed in favour of security_prepare_creds().
(*) security_cred_free(), ->cred_free()
New. Free security data attached to cred->security.
(*) security_prepare_creds(), ->cred_prepare()
New. Duplicate any security data attached to cred->security.
(*) security_commit_creds(), ->cred_commit()
New. Apply any security effects for the upcoming installation of new
security by commit_creds().
(*) security_task_post_setuid(), ->task_post_setuid()
Removed in favour of security_task_fix_setuid().
(*) security_task_fix_setuid(), ->task_fix_setuid()
Fix up the proposed new credentials for setuid(). This is used by
cap_set_fix_setuid() to implicitly adjust capabilities in line with
setuid() changes. Changes are made to the new credentials, rather
than the task itself as in security_task_post_setuid().
(*) security_task_reparent_to_init(), ->task_reparent_to_init()
Removed. Instead the task being reparented to init is referred
directly to init's credentials.
NOTE! This results in the loss of some state: SELinux's osid no
longer records the sid of the thread that forked it.
(*) security_key_alloc(), ->key_alloc()
(*) security_key_permission(), ->key_permission()
Changed. These now take cred pointers rather than task pointers to
refer to the security context.
(4) sys_capset().
This has been simplified and uses less locking. The LSM functions it
calls have been merged.
(5) reparent_to_kthreadd().
This gives the current thread the same credentials as init by simply using
commit_thread() to point that way.
(6) __sigqueue_alloc() and switch_uid()
__sigqueue_alloc() can't stop the target task from changing its creds
beneath it, so this function gets a reference to the currently applicable
user_struct which it then passes into the sigqueue struct it returns if
successful.
switch_uid() is now called from commit_creds(), and possibly should be
folded into that. commit_creds() should take care of protecting
__sigqueue_alloc().
(7) [sg]et[ug]id() and co and [sg]et_current_groups.
The set functions now all use prepare_creds(), commit_creds() and
abort_creds() to build and check a new set of credentials before applying
it.
security_task_set[ug]id() is called inside the prepared section. This
guarantees that nothing else will affect the creds until we've finished.
The calling of set_dumpable() has been moved into commit_creds().
Much of the functionality of set_user() has been moved into
commit_creds().
The get functions all simply access the data directly.
(8) security_task_prctl() and cap_task_prctl().
security_task_prctl() has been modified to return -ENOSYS if it doesn't
want to handle a function, or otherwise return the return value directly
rather than through an argument.
Additionally, cap_task_prctl() now prepares a new set of credentials, even
if it doesn't end up using it.
(9) Keyrings.
A number of changes have been made to the keyrings code:
(a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have
all been dropped and built in to the credentials functions directly.
They may want separating out again later.
(b) key_alloc() and search_process_keyrings() now take a cred pointer
rather than a task pointer to specify the security context.
(c) copy_creds() gives a new thread within the same thread group a new
thread keyring if its parent had one, otherwise it discards the thread
keyring.
(d) The authorisation key now points directly to the credentials to extend
the search into rather pointing to the task that carries them.
(e) Installing thread, process or session keyrings causes a new set of
credentials to be created, even though it's not strictly necessary for
process or session keyrings (they're shared).
(10) Usermode helper.
The usermode helper code now carries a cred struct pointer in its
subprocess_info struct instead of a new session keyring pointer. This set
of credentials is derived from init_cred and installed on the new process
after it has been cloned.
call_usermodehelper_setup() allocates the new credentials and
call_usermodehelper_freeinfo() discards them if they haven't been used. A
special cred function (prepare_usermodeinfo_creds()) is provided
specifically for call_usermodehelper_setup() to call.
call_usermodehelper_setkeys() adjusts the credentials to sport the
supplied keyring as the new session keyring.
(11) SELinux.
SELinux has a number of changes, in addition to those to support the LSM
interface changes mentioned above:
(a) selinux_setprocattr() no longer does its check for whether the
current ptracer can access processes with the new SID inside the lock
that covers getting the ptracer's SID. Whilst this lock ensures that
the check is done with the ptracer pinned, the result is only valid
until the lock is released, so there's no point doing it inside the
lock.
(12) is_single_threaded().
This function has been extracted from selinux_setprocattr() and put into
a file of its own in the lib/ directory as join_session_keyring() now
wants to use it too.
The code in SELinux just checked to see whether a task shared mm_structs
with other tasks (CLONE_VM), but that isn't good enough. We really want
to know if they're part of the same thread group (CLONE_THREAD).
(13) nfsd.
The NFS server daemon now has to use the COW credentials to set the
credentials it is going to use. It really needs to pass the credentials
down to the functions it calls, but it can't do that until other patches
in this series have been applied.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: James Morris <jmorris@namei.org>
Pass credentials through dentry_open() so that the COW creds patch can have
SELinux's flush_unauthorized_files() pass the appropriate creds back to itself
when it opens its null chardev.
The security_dentry_open() call also now takes a creds pointer, as does the
dentry_open hook in struct security_operations.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: James Morris <jmorris@namei.org>
Separate the task security context from task_struct. At this point, the
security data is temporarily embedded in the task_struct with two pointers
pointing to it.
Note that the Alpha arch is altered as it refers to (E)UID and (E)GID in
entry.S via asm-offsets.
With comment fixes Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.
Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: linux-nfs@vger.kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
Commit 8d7c4203 "nfsd: fix failure to set eof in readdir in some
situations" introduced a bug: on a directory in an exported ext3
filesystem with dir_index unset, a READDIR will only return about 250
entries, even if the directory was larger.
Bisected it back to this commit; reverting it fixes the problem.
It turns out that in this case ext3 reads a block at a time, then
returns from readdir, which means we can end up with buf.full==0 but
with more entries in the directory still to be read. Before 8d7c4203
(but after c002a6c797 "Optimise NFS readdir hack slightly"), this would
cause us to return the READDIR result immediately, but with the eof bit
unset. That could cause a performance regression (because the client
would need more roundtrips to the server to read the whole directory),
but no loss in correctness, since the cleared eof bit caused the client
to send another readdir. After 8d7c4203, the setting of the eof bit
made this a correctness problem.
So, move nfserr_eof into the loop and remove the buf.full check so that
we loop until buf.used==0. The following seems to do the right thing
and reduces the network traffic since we don't return a READDIR result
until the buffer is full.
Tested on an empty directory & large directory; eof is properly sent and
there are no more short buffers.
Signed-off-by: Doug Nazar <nazard@dragoninc.ca>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u
can be replaced with %pI4
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before 14f7dd6320 "[PATCH] Copy XFS
readdir hack into nfsd code", readdir_cd->err was reset to eof before
each call to vfs_readdir; afterwards, it is set only once. Similarly,
c002a6c797 "[PATCH] Optimise NFS readdir
hack slightly", can cause us to exit without nfserr_eof set. Fix this.
This ensures the "eof" bit is set when needed in readdir replies. (The
particular case I saw was an nfsv4 readdir of an empty directory, which
returned with no entries (the protocol requires "." and ".." to be
filtered out), but with eof unset.)
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Avoid calling the underlying ->readdir() again when we reached the end
already; keep going round the loop only if we stopped due to our own
buffer being full.
[AV: tidy the things up a bit, while we are there]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It's not the final state, but it allows moving ->readdir() instances
to passing filldir return value to caller of vfs_readdir().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Some file systems with their own internal locking have problems with the
way that nfsd calls the ->lookup() method from within a filldir function
called from their ->readdir() method. The recursion back into the file
system code can cause deadlock.
XFS has a fairly hackish solution to this which involves doing the
readdir() into a locally-allocated buffer, then going back through it
calling the filldir function afterwards. It's not ideal, but it works.
It's particularly suboptimal because XFS does this for local file
systems too, where it's completely unnecessary.
Copy this hack into the NFS code where it can be used only for NFS
export. In response to feedback, use it unconditionally rather than only
for the affected file systems.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We might as well do all of these at the end. Fix up a couple minor
style nits while we're there.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Drop reference to export key on error. Compile tested.
Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Fix a memory leak in nfsd_getxattr. nfsd_getxattr should free up memory
that it allocated if vfs_getxattr fails.
Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The Linux NFS server can be started via a user-space write to
/proc/fs/nfs/threads or to /proc/fs/nfs/portlist. In the first case,
all default listeners are started (both UDP and TCP). In the second,
a listener is started only for one specified transport.
The NFS server has to make sure lockd stays up until the last listener
transport goes away. To support both start-up interfaces, it should
do one lockd_up() for each NFSD listener.
The nfsd_init_socks() function used to do one lockd_up() call for each
svc_create_xprt(). Recently commit
26a4140923 mistakenly changed
nfsd_init_socks() to do only one lockd_up() call even though it still
does two svc_create_xprt() calls.
The end result is a lockd_down() BUG during NFSD shutdown processing
because nfsd_last_threads() does a lockd_down() call for each entry
on the sv_permsocks list, but the start-up code doesn't do a matching
number of lockd_up() calls.
Add a second lockd_up() in nfsd_init_socks() to make sure the number
of lockd_up() calls matches the number of entries on the NFS servers's
sv_permsocks list.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: The svc_addsock() function no longer uses its "proto"
argument, so remove it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: Now that lockd_up() starts listeners for both transports, the
"proto" argument is no longer needed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Rewrite grace period code to unify management of grace period across
lockd and nfsd. The current code has lockd and nfsd cooperate to
compute a grace period which is satisfactory to them both, and then
individually enforce it. This creates a slight race condition, since
the enforcement is not coordinated. It's also more complicated than
necessary.
Here instead we have lockd and nfsd each inform common code when they
enter the grace period, and when they're ready to leave the grace
period, and allow normal locking only after both of them are ready to
leave.
We also expect the locks_start_grace()/locks_end_grace() interface here
to be simpler to build on for future cluster/high-availability work,
which may require (for example) putting individual filesystems into
grace, or enforcing grace periods across multiple cluster nodes.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
since commit ff7d9756b5
"nfsd: use static memory for callback program and stats"
do_probe_callback uses a static callback program
(NFS4_CALLBACK) rather than the one set in clp->cl_callback.cb_prog
as passed in by the client in setclientid (4.0)
or create_session (4.1).
This patches introduces rpc_create_args.prognumber that allows
overriding program->number when creating rpc_clnt.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Now that cb_stats are static (since commit
ff7d9756b5)
there's no need to clear them.
Initially I thought it might make sense to do
that every callback probing but since the stats
are per-program and they are shared between possibly
several client callback instances, zeroing them out
seems like the wrong thing to do.
Note that that commit also introduced a bug
since stats.program is also being cleared in the process
and it is not restored after the memset as it used to be.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
I had a report from someone building a large NFS server that they were
unable to start more than 585 nfsd threads. It was reported against an
older kernel using the slab allocator, and I tracked it down to the
large allocation in nfsd_racache_init failing.
It appears that the slub allocator handles large allocations better,
but large contiguous allocations can often be problematic. There
doesn't seem to be any reason that the racache has to be allocated as a
single large chunk. This patch breaks this up so that the racache is
built up from separate allocations.
(Thanks also to Takashi Iwai for a bugfix.)
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Takashi Iwai <tiwai@suse.de>
After using the encode_stateid helper the "p" pointer declared
by ENCODE_SEQID_OP_HEAD is warned as unused.
In the single site where it is still needed it can be declared
separately using the ENCODE_HEAD macro.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
nfsd4_encode_open first reservation is currently for 36 + sizeof(stateid_t)
while it writes after the stateid a cinfo (20 bytes) and 5 more 4-bytes
words, for a total of 40 + sizeof(stateid_t).
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
RFC 2623 section 2.3.2 permits the server to bypass gss authentication
checks for certain operations that a client may perform when mounting.
In the case of a client that doesn't have some form of credentials
available to it on boot, this allows it to perform the mount unattended.
(Presumably real file access won't be needed until a user with
credentials logs in.)
Being slightly more lenient allows lots of old clients to access
krb5-only exports, with the only loss being a small amount of
information leaked about the root directory of the export.
This affects only v2 and v3; v4 still requires authentication for all
access.
Thanks to Peter Staubach testing against a Solaris client, which
suggesting addition of v3 getattr, to the list, and to Trond for noting
that doing so exposes no additional information.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Peter Staubach <staubach@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Introduce and initialize an address family field in the svc_serv structure.
This field will determine what family to use for the service's listener
sockets and what families are advertised via the local rpcbind daemon.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The array we kmalloc() here is not large enough.
Thanks to Johann Dahm and David Richter for bug report and testing.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: David Richter <richterd@citi.umich.edu>
Tested-by: Johann Dahm <jdahm@umich.edu>
Move the cstate_alloc call so that if it fails, the response is setup to
encode the NFS error. The out label now means that the
nfsd4_compound_state has not been allocated.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
There doesn't seem to be a compelling reason why nfsd4_op_name() is
marked as "inline":
It's only used in a dprintk(), and as long as it has only one caller
non-ancient gcc versions anyway inline it automatically.
This patch fixes the following compile error with gcc 3.4:
...
CC fs/nfsd/nfs4proc.o
nfs4proc.c: In function `nfsd4_proc_compound':
nfs4proc.c:854: sorry, unimplemented: inlining failed in call to
nfs4proc.c:897: sorry, unimplemented: called from here
make[3]: *** [fs/nfsd/nfs4proc.o] Error 1
Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
[ Also made it "const char *" - Linus]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Once clp is assigned, it never becomes NULL, so we can make a label for it
in the error handling code. Because the call to path_lookup follows the
call to auth_domain_find, its error handling code should jump to this new
label.
The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r@
expression x,E;
statement S;
position p1,p2,p3;
@@
(
if ((x = auth_domain_find@p1(...)) == NULL || ...) S
|
x = auth_domain_find@p1(...)
... when != x
if (x == NULL || ...) S
)
<...
if@p3 (...) { ... when != auth_domain_put(x)
when != if (x) { ... auth_domain_put(x); ...}
return@p2 ...;
}
...>
(
return x;
|
return 0;
|
x = E
|
E = x
|
auth_domain_put(x)
)
@exists@
position r.p1,r.p2,r.p3;
expression x;
int ret != 0;
statement S;
@@
* x = auth_domain_find@p1(...)
<...
* if@p3 (...)
S
...>
* return@p2 \(NULL\|ret\);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
fs.h needs path.h, not namei.h; nfs_fs.h doesn't need it at all.
Several places in the tree needed direct include.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Remove the unused mode parameter from vfs_symlink and callers.
Thanks to Tetsuo Handa for noticing.
CC: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Fix nlm_fopen() to return NLM_FAILED (or NLM_LCK_DENIED_NOLOCKS) instead
of NLM_LCK_DENIED. The latter means the lock request failed because of a
conflicting lock (i.e. a temporary error), which is wrong in this case.
Also fix the client to return ENOLCK instead of EAGAIN if a blocking lock
request returns with NLM_LOCK_DENIED.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: David Teigland <teigland@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-2.6.27' of git://linux-nfs.org/~bfields/linux: (51 commits)
nfsd: nfs4xdr.c do-while is not a compound statement
nfsd: Use C99 initializers in fs/nfsd/nfs4xdr.c
lockd: Pass "struct sockaddr *" to new failover-by-IP function
lockd: get host reference in nlmsvc_create_block() instead of callers
lockd: minor svclock.c style fixes
lockd: eliminate duplicate nlmsvc_lookup_host call from nlmsvc_lock
lockd: eliminate duplicate nlmsvc_lookup_host call from nlmsvc_testlock
lockd: nlm_release_host() checks for NULL, caller needn't
file lock: reorder struct file_lock to save space on 64 bit builds
nfsd: take file and mnt write in nfs4_upgrade_open
nfsd: document open share bit tracking
nfsd: tabulate nfs4 xdr encoding functions
nfsd: dprint operation names
svcrdma: Change WR context get/put to use the kmem cache
svcrdma: Create a kmem cache for the WR contexts
svcrdma: Add flush_scheduled_work to module exit function
svcrdma: Limit ORD based on client's advertised IRD
svcrdma: Remove unused wait q from svcrdma_xprt structure
svcrdma: Remove unneeded spin locks from __svc_rdma_free
svcrdma: Add dma map count and WARN_ON
...
The WRITEMEM macro produces sparse warnings of the form:
fs/nfsd/nfs4xdr.c:2668:2: warning: do-while statement is not a compound statement
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Thanks to problem report and original patch from Harvey Harrison.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Benny Halevy <bhalevy@panasas.com>
Pass a more generic socket address type to nlmsvc_unlock_all_by_ip() to
allow for future support of IPv6. Also provide additional sanity
checking in failover_unlock_ip() when constructing the server's IP
address.
As an added bonus, provide clean kerneldoc comments on related NLM
interfaces which were recently added.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The cl_chatty flag alows us to control whether a given rpc client leaves
"server X not responding, timed out"
messages in the syslog. Such messages make sense for ordinary nfs
clients (where an unresponsive server means applications on the
mountpoint are probably hanging), but not for the callback client (which
can fail more commonly, with the only result just of disabling some
optimizations).
Previously cl_chatty was removed, do to lack of users; reinstate it, and
use it for the nfsd's callback client.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
It's not immediately obvious from the code why we're doing this.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Benny Halevy <bhalevy@panasas.com>
In preparation for minorversion 1
All encoders now return an nfserr status (typically their
nfserr argument). Unsupported ops go through nfsd4_encode_operation
too, so use nfsd4_encode_noop to encode nothing for their reply body.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Have separate vectors of operation decoders for each minorversion.
Obsolete ops in newer minorversions have default implementation returning
nfserr_opnotsupp.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Check minorversion once before decoding any operation and reject with
nfserr_minor_vers_mismatch if != 0 (this still happens in nfsd4_proc_compound).
In this case return a zero length resultdata array as required by RFC3530.
minorversion 1 processing will have its own vector of decoders.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Multiple mnt_want_write() calls in the switch statement looks really
ugly.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
knfsd currently uses 2 signal masks when processing requests. A "loose"
mask (SHUTDOWN_SIGS) that it uses when receiving network requests, and
then a more "strict" mask (ALLOWED_SIGS, which is just SIGKILL) that it
allows when doing the actual operation on the local storage.
This is apparently unnecessarily complicated. The underlying filesystem
should be able to sanely handle a signal in the middle of an operation.
This patch removes the signal mask handling from knfsd altogether. When
knfsd is started as a kthread, all signals are ignored. It then allows
all of the signals in SHUTDOWN_SIGS. There's no need to set the mask
as well.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Thanks to Frank Van Maarseveen for the original problem report: "A
privileged process on an NFS client which drops privileges after using
them to change the current working directory, will experience incorrect
EACCES after an NFS server reboot. This problem can also occur after
memory pressure on the server, particularly when the client side is
quiet for some time."
This occurs because the filehandle points to a directory whose parents
are no longer in the dentry cache, and we're attempting to reconnect the
directory to its parents without adequate permissions to perform lookups
in the parent directories.
We can therefore fix the problem by acquiring the necessary capabilities
before attempting the reconnection. We do this only in the
no_subtree_check case, since the documented behavior of the
subtree_check export option requires the server to check that the user
has lookup permissions on all parents.
The subtree_check case still has a problem, since reconnect_path()
unnecessarily requires both read and lookup permissions on all parent
directories. However, a fix in that case would be more delicate, and
use of subtree_check is already discouraged for other reasons.
Signed-off-by: Neil Brown <neilb@suse.de>
Cc: Frank van Maarseveen <frankvm@frankvm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Rename nfsd_permission() specific MAY_* flags to NFSD_MAY_* to make it
clear, that these are not used outside nfsd, and to avoid name and
number space conflicts with the VFS.
[comment from hch: rename MAY_READ, MAY_WRITE and MAY_EXEC as well]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
OCFS2 can return -ERESTARTSYS from write requests (and possibly
elsewhere) if there is a signal pending.
If nfsd is shutdown (by sending a signal to each thread) while there
is still an IO load from the client, each thread could handle one last
request with a signal pending. This can result in -ERESTARTSYS
which is not understood by nfserrno() and so is reflected back to
the client as nfserr_io aka -EIO. This is wrong.
Instead, interpret ERESTARTSYS to mean "try again later" by returning
nfserr_jukebox. The client will resend and - if the server is
restarted - the write will (hopefully) be successful and everyone will
be happy.
The symptom that I narrowed down to this was:
copy a large file via NFS to an OCFS2 filesystem, and restart
the nfs server during the copy.
The 'cp' might get an -EIO, and the file will be corrupted -
presumably holes in the middle where writes appeared to fail.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
We need the nfsd_mutex before accessing nfsd_serv->sv_nrthreads or we
can't even guarantee nfsd_serv will still be there.
Signed-off-by: Neil Brown <neilb@suse.de>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Since we no longer make any distinction between shutdown signals with
nfsd, then it becomes easier to just standardize on a particular signal
to use to bring it down (SIGINT, in this case).
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This patch is rather large, but I couldn't figure out a way to break it
up that would remain bisectable. It does several things:
- change svc_thread_fn typedef to better match what kthread_create expects
- change svc_pool_map_set_cpumask to be more kthread friendly. Make it
take a task arg and and get rid of the "oldmask"
- have svc_set_num_threads call kthread_create directly
- eliminate __svc_create_thread
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The special handling for SIGHUP in knfsd is a holdover from much
earlier versions of Linux where reloading the export table was
more expensive. That facility is not really needed anymore and
to my knowledge, is seldom-used.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Several of the nfsd filesystem interfaces allow changes to parameters
that don't have any effect on a running nfsd service. They are only ever
checked when nfsd is started. This patch fixes it so that changes to
those procfiles return -EBUSY if nfsd is already running to make it
clear that changes on the fly don't work.
The patch should also close some relatively harmless races between
changing the info in those interfaces and starting nfsd, since these
variables are being moved under the protection of the nfsd_mutex.
Finally, the nfsv4recoverydir file always returns -EINVAL if read. This
patch fixes it to return the recoverydir path as expected.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This removes the BKL from the RPC service creation codepath. The BKL
really isn't adequate for this job since some of this info needs
protection across sleeps.
Also, add some comments to try and clarify how the locking should work
and to make it clear that the BKL isn't necessary as long as there is
adequate locking between tasks when touching the svc_serv fields.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
WRITEMEM zeroes the last word in the destination buffer
for padding purposes, but this must not be done if
no bytes are to be copied, as it would result
in zeroing of the word right before the array.
The current implementation works since it's always called
with non zero nbytes or it follows an encoding of the
string (or opaque) length which, if equal to zero,
can be overwritten with zero.
Nevertheless, it seems safer to check for this case.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
We already print each operation of the compound when debugging is turned
on; printing the result could also help with remote debugging.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
These bit operations don't need to be atomic. They're all done under a
single big mutex anyway.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to
main tree.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Presumably this is left over from earlier drafts of v4, which listed
TIME_METADATA as writeable. It's read-only in rfc 3530, and shouldn't
be modifiable anyway.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The file_lock structure is used both as a heavy-weight representation of
an active lock, with pointers to reference-counted structures, etc., and
as a simple container for parameters that describe a file lock.
The conflicting lock returned from __posix_lock_file is an example of
the latter; so don't call the filesystem or lock manager callbacks when
copying to it. This also saves the need for an unnecessary
locks_init_lock in the nfsv4 server.
Thanks to Trond for pointing out the error.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Add /proc/fs/nfsd/unlock_filesystem, which allows e.g.:
shell> echo /mnt/sfs1 > /proc/fs/nfsd/unlock_filesystem
so that a filesystem can be unmounted before allowing a peer nfsd to
take over nfs service for the filesystem.
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Cc: Lon Hohberger <lhh@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
fs/lockd/svcsubs.c | 66 +++++++++++++++++++++++++++++++++++++++-----
fs/nfsd/nfsctl.c | 65 +++++++++++++++++++++++++++++++++++++++++++
include/linux/lockd/lockd.h | 7 ++++
3 files changed, 131 insertions(+), 7 deletions(-)
For high-availability NFS service, we generally need to be able to drop
file locks held on the exported filesystem before moving clients to a
new server. Currently the only way to do that is by shutting down lockd
entirely, which is often undesireable (for example, if you want to
continue exporting other filesystems).
This patch allows the administrator to release all locks held by clients
accessing the client through a given server ip address, by echoing that
address to a new file, /proc/fs/nfsd/unlock_ip, as in:
shell> echo 10.1.1.2 > /proc/fs/nfsd/unlock_ip
The expected sequence of events can be:
1. Tear down the IP address
2. Unexport the path
3. Write IP to /proc/fs/nfsd/unlock_ip to unlock files
4. Signal peer to begin take-over.
For now we only support IPv4 addresses and NFSv2/v3 (NFSv4 locks are not
affected).
Also, if unmounting the filesystem is required, we assume at step 3 that
clients using the given server ip are the only clients holding locks on
the given filesystem; otherwise, an additional patch is required to
allow revoking all locks held by lockd on a given filesystem.
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Cc: Lon Hohberger <lhh@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
fs/lockd/svcsubs.c | 66 +++++++++++++++++++++++++++++++++++++++-----
fs/nfsd/nfsctl.c | 65 +++++++++++++++++++++++++++++++++++++++++++
include/linux/lockd/lockd.h | 7 ++++
3 files changed, 131 insertions(+), 7 deletions(-)
Currently, knfsd only clears the setuid bit if the owner of a file is
changed on a SETATTR call, and only clears the setgid bit if the group
is changed. POSIX says this in the spec for chown():
"If the specified file is a regular file, one or more of the
S_IXUSR, S_IXGRP, or S_IXOTH bits of the file mode are set, and the
process does not have appropriate privileges, the set-user-ID
(S_ISUID) and set-group-ID (S_ISGID) bits of the file mode shall
be cleared upon successful return from chown()."
If I'm reading this correctly, then knfsd is doing this wrong. It should
be clearing both the setuid and setgid bit on any SETATTR that changes
the uid or gid. This wasn't really as noticable before, but now that the
ATTR_KILL_S*ID bits are a no-op for the NFS client, it's more evident.
This patch corrects the nfsd_setattr logic so that this occurs. It also
does a bit of cleanup to the function.
There is also one small behavioral change. If a SETATTR call comes in
that changes the uid/gid and the mode, then we now only clear the setgid
bit if the group execute bit isn't set. The setgid bit without a group
execute bit signifies mandatory locking and we likely don't want to
clear the bit in that case. Since there is no call in POSIX that should
generate a SETATTR call like this, then this should rarely happen, but
it's worth noting.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
There's no need to dynamically allocate this memory, and doing so may
create the possibility of races on shutdown of the rpc client. (We've
witnessed it only after adding rpcsec_gss support to the server, after
which the rpc code can send destroys calls that expect to still be able
to access the rpc_stats structure after it has been destroyed.)
Such races are in theory possible if the module containing this "static"
memory is removed very quickly after an rpc client is destroyed, but
we haven't seen that happen.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Move the code that actually parses the filehandle and looks up the
dentry and export to a separate function. This simplifies the reference
counting a little and moves fh_verify() a little closer to the kernel
ideal of small, minimally-indentended functions. Clean up a few other
minor style sins along the way.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Neil Brown <neilb@suse.de>
While lease is correctly checked by supplying the type argument to
vfs_setlease(), it's stored with fl_type uninitialized. This breaks the
logic when checking the type of the lease. The fix is to initialize
fl_type.
The old code still happened to function correctly since F_RDLCK is zero,
and we only implement read delegations currently (nor write
delegations). But that's no excuse for not fixing this.
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
fs/nfsd/vfs.c:991:27: warning: Using plain integer as NULL pointer
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Add extern to nfsd/nfsd.h
fs/nfsd/nfssvc.c:146:5: warning: symbol 'nfsd_nrthreads' was not declared. Should it be static?
fs/nfsd/nfssvc.c:261:5: warning: symbol 'nfsd_nrpools' was not declared. Should it be static?
fs/nfsd/nfssvc.c:269:5: warning: symbol 'nfsd_get_nrthreads' was not declared. Should it be static?
fs/nfsd/nfssvc.c:281:5: warning: symbol 'nfsd_set_nrthreads' was not declared. Should it be static?
fs/nfsd/export.c:1534:23: warning: symbol 'nfs_exports_op' was not declared. Should it be static?
Add include of auth.h
fs/nfsd/auth.c:27:5: warning: symbol 'nfsd_setuser' was not declared. Should it be static?
Make static, move forward declaration closer to where it's needed.
fs/nfsd/nfs4state.c:1877:1: warning: symbol 'laundromat_main' was not declared. Should it be static?
Make static, forward declaration was already marked static.
fs/nfsd/nfs4idmap.c:206:1: warning: symbol 'idtoname_parse' was not declared. Should it be static?
fs/nfsd/vfs.c:1156:1: warning: symbol 'nfsd_create_setattr' was not declared. Should it be static?
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This patch makes the needlessly global nfsd_create_setattr() static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Likewise, distros usually leave CONFIG_NFSD_TCP enabled.
TCP support in the Linux NFS server is stable enough that we can leave it
on always. CONFIG_NFSD_TCP adds about 10 lines of code, and defaults to
"Y" anyway.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The code here is difficult to understand; attempt to clarify somewhat by
pulling out one of the more mystifying conditionals into a separate
function.
While we're here, also add lease_time to the list of attributes that we
don't really need to cross a mountpoint to fetch.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Peter Staubach <staubach@redhat.com>
This adds IPv6 support to the interfaces that are used to express nfsd
exports. All addressed are stored internally as IPv6; backwards
compatibility is maintained using mapped addresses.
Thanks to Bruce Fields, Brian Haley, Neil Brown and Hideaki Joshifuji
for comments
Signed-off-by: Aurelien Charbon <aurelien.charbon@bull.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Brian Haley <brian.haley@hp.com>
Cc: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
If we depend on the inodes for writeability, we will not catch the r/o mounts
when implemented.
This patches uses __mnt_want_write(). It does not guarantee that the mount
will stay writeable after the check. But, this is OK for one of the checks
because it is just for a printk().
The other two are probably unnecessary and duplicate existing checks in the
VFS. This won't make them better checks than before, but it will make them
detect r/o mounts.
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This basically audits the callers of xattr_permission(), which calls
permission() and can perform writes to the filesystem.
[AV: add missing parts - removexattr() and nfsd posix acls, plug for a leak
spotted by Miklos]
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This also uses the little helper in the NFS code to make an if() a little bit
less ugly. We introduced the helper at the beginning of the series.
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This takes care of all of the direct callers of vfs_mknod().
Since a few of these cases also handle normal file creation
as well, this also covers some calls to vfs_create().
So that we don't have to make three mnt_want/drop_write()
calls inside of the switch statement, we move some of its
logic outside of the switch and into a helper function
suggested by Christoph.
This also encapsulates a fix for mknod(S_IFREG) that Miklos
found.
[AV: merged mkdir handling, added missing nfsd pieces]
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Elevate the write count during the vfs_rmdir() and vfs_unlink().
[AV: merged rmdir and unlink parts, added missing pieces in nfsd]
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If someone decides to demote a file from r/w to just
r/o, they can use this same code as __fput().
NFS does just that, and will use this in the next
patch.
AV: drop write access in __fput() only after we evict from file list.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Cc: Erez Zadok <ezk@cs.sunysb.edu>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J Bruce Fields" <bfields@fieldses.org>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This bug was always here, but before my commit 6fa02839bf
("recheck for secure ports in fh_verify"), it could only be triggered by
failure of a kmalloc(). After that commit it could be triggered by a
client making a request from a non-reserved port for access to an export
marked "secure". (Exports are "secure" by default.)
The result is a struct svc_export with a reference count one too low,
resulting in likely oopses next time the export is accessed.
The reference counting here is not straightforward; a later patch will
clean up fh_verify().
Thanks to Lukas Hejtmanek for the bug report and followup.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Lukas Hejtmanek <xhejtman@ics.muni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sorry for the noise, but here's the v3 of this compilation fix :)
There are some places, which declare the char buf[...] on the stack
to push it later into dprintk(). Since the dprintk sometimes (if the
CONFIG_SYSCTL=n) becomes an empty do { } while (0) stub, these buffers
cause gcc to produce appropriate warnings.
Wrap these buffers with RPC_IFDEBUG macro, as Trond proposed, to
compile them out when not needed.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
d_path() is used on a <dentry,vfsmount> pair. Lets use a struct path to
reflect this.
[akpm@linux-foundation.org: fix build in mm/memory.c]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Acked-by: Bryan Wu <bryan.wu@analog.com>
Acked-by: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
seq_path() is always called with a dentry and a vfsmount from a struct path.
Make seq_path() take it directly as an argument.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I'm embedding struct path into struct svc_expkey.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Add path_put() functions for releasing a reference to the dentry and
vfsmount of a struct path in the right order
* Switch from path_release(nd) to path_put(&nd->path)
* Rename dput_path() to path_put_conditional()
[akpm@linux-foundation.org: fix cifs]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: <linux-fsdevel@vger.kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the central patch of a cleanup series. In most cases there is no good
reason why someone would want to use a dentry for itself. This series reflects
that fact and embeds a struct path into nameidata.
Together with the other patches of this series
- it enforced the correct order of getting/releasing the reference count on
<dentry,vfsmount> pairs
- it prepares the VFS for stacking support since it is essential to have a
struct path in every place where the stack can be traversed
- it reduces the overall code size:
without patch series:
text data bss dec hex filename
5321639 858418 715768 6895825 6938d1 vmlinux
with patch series:
text data bss dec hex filename
5320026 858418 715768 6894212 693284 vmlinux
This patch:
Switch from nd->{dentry,mnt} to nd->path.{dentry,mnt} everywhere.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix cifs]
[akpm@linux-foundation.org: fix smack]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The patch supports legacy (32-bit) capability userspace, and where possible
translates 32-bit capabilities to/from userspace and the VFS to 64-bit
kernel space capabilities. If a capability set cannot be compressed into
32-bits for consumption by user space, the system call fails, with -ERANGE.
FWIW libcap-2.00 supports this change (and earlier capability formats)
http://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/
[akpm@linux-foundation.org: coding-syle fixes]
[akpm@linux-foundation.org: use get_task_comm()]
[ezk@cs.sunysb.edu: build fix]
[akpm@linux-foundation.org: do not initialise statics to 0 or NULL]
[akpm@linux-foundation.org: unused var]
[serue@us.ibm.com: export __cap_ symbols]
Signed-off-by: Andrew G. Morgan <morgan@kernel.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: James Morris <jmorris@namei.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Erez Zadok <ezk@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Neil Brown points out that we're checking buf[size-1] in a couple places
without first checking whether size is zero.
Actually, given the implementation of simple_transaction_get(), buf[-1]
is zero, so in both of these cases the subsequent check of the value of
buf[size-1] will catch this case.
But it seems fragile to depend on that, so add explicit checks for this
case.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Acked-by: NeilBrown <neilb@suse.de>
Neither EPERM and ENOENT map to valid errors for PUTROOTFH according to
rfc 3530, and, if anything, ENOENT is likely to be slightly more
informative; so don't bother mapping ENOENT to EPERM. (Probably this
was originally done because one likely cause was that there is an fsid=0
export but that it isn't permitted to this particular client. Now that
we allow WRONGSEC returns, this is somewhat less likely.)
In the long term we should work to make this situation less likely,
perhaps by turning off nfsv4 service entirely in the absence of the
pseudofs root, or constructing a pseudofilesystem root ourselves in the
kernel as necessary.
Thanks to Benny Halevy <bhalevy@panasas.com> for pointing out this
problem.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Benny Halevy <bhalevy@panasas.com>
Andy Adamson