Commit Graph

2899 Commits

Author SHA1 Message Date
Hemant Pedanekar 28c1969ff8 ide: fix ioctl to pass requested transfer mode to ide_find_dma_mode instead of UDMA6
Currently, ide_cmd_ioctl when invoked for setting DMA transfer mode calls
ide_find_dma_mode with requested mode as XFER_UDMA_6. This prevents setting DMA
mode to any other value than the default (maximum) supported by the device (or
UDMA6, if supported) irrespective of the actual requested transfer mode and
returns error.

For example, setting mode to UDMA2 using hdparm, where UDMA4 is the default
transfer mode gives following error:
	# ./hdparm -d1 -Xudma2  /dev/hda
	 /dev/hda:hda: UDMA/66 mode selected
	 setting using_dma to 1 (on)
	 hda: UDMA/66 mode selected
	 setting xfermode to 66 (UltraDMA mode2)
	 HDIO_DRIVE_CMD(setxfermode) failed: Invalid argument
	 using_dma     =  1 (on)

This patch fixes the issue.

Signed-off-by: Hemant Pedanekar <hemantp@ti.com>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25 15:04:54 -08:00
H Hartley Sweeten 8492090542 drivers/ide/tx4938ide.c: use resource_size()
Use resource_size() for devm_request_mem_region.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23 10:31:18 -08:00
H Hartley Sweeten 30433d8141 drivers/ide/ide_platform.c: use resource_size()
Use resource_size() for devm_{ioremap/io_port_map}.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23 10:30:34 -08:00
H Hartley Sweeten 4b7c7237c0 drivers/ide/au1xxx-ide.c: use resource_size()
Use resource_size() for {request/release}_mem_region and ioremap.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23 10:27:22 -08:00
Bartlomiej Zolnierkiewicz a531cd69ad hpt366: remove dead old timing tables
It has been enough time since introduction of the new timing tables
(commit 809b53c from Dec 12 2007) and the old timing tables are still
available in pata_hpt37x.c (or git history) if somebody needs them.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18 10:38:37 -08:00
Linus Torvalds a58695bb9d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  Revert "ide: try to use PIO Mode 0 during probe if possible"
2009-11-09 09:50:55 -08:00
Dominik Brodowski 444486a5f9 pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (ide)
ide-cs.c is the only PCMCIA device driver making use of CONFIG_PCMCIA_DEBUG,
so convert it to use the dynamic debug infrastructure.

Also, remove all usages of the CS_CHECK macro and replace them with proper
Linux style calling and return value checking. The extra error reporting may
be dropped, as the PCMCIA core already complains about any (non-driver-author)
errors.

CC: linux-ide@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-08 18:23:14 +01:00
David S. Miller 0fb18c4777 Revert "ide: try to use PIO Mode 0 during probe if possible"
This reverts commit 6029336426.

Ok, we really do need to revert this, even with Bart's sis5513.c
fix in there.

The problem is that several driver's ->set_pio_mode() method
depends upon the drive->media type being set properly.  Most
of them use this to enable prefetching, which can only be done
for disk media.

But the commit being reverted here calls ->set_pio_mode() before
it's setup.  Actually it considers everything disk because that
is the default media type set by ide_port_init_devices_data().

The set of drivers that depend upon the media type in their
->set_pio_method() are:

drivers/ide/alim15x3.c
drivers/ide/it8172.c
drivers/ide/it8213.c
drivers/ide/pdc202xx_old.c
drivers/ide/piix.c
drivers/ide/qd65xx.c
drivers/ide/sis5513.c
drivers/ide/slc90e66.c

And it is possible that we could fix this by guarding the prefetching
and other media dependent setting changes with a test on
IDE_PFLAG_PROBING in hwif->port_flags, that's simply too risky for
2.6.32-rcX and -stable.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06 04:52:50 -08:00
Linus Torvalds 8d5eb435c3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  ide: Serialize CMD643 and CMD646 to fix a hardware bug with SSD
2009-10-29 09:22:34 -07:00
Robert Hancock 73ba32320d ide: update Kconfig text to mark as deprecated
The current Kconfig text for CONFIG_IDE doesn't give a hint to users that this
subsystem is currently in maintenance mode and isn't actively developed.
Let's correct this by marking it as deprecated, and also get rid of a bunch of
unnecessary text that doesn't really have anything to do with what the option is
for.

Signed-off-by: Robert Hancock <hancockrwd@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 03:09:26 -07:00
Borislav Petkov cbba2fa7b2 ide-tape: remove the BKL
Replace the BKL calls in the chrdev_{open,release} interfaces with a
simple sleeping mutex.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 03:09:25 -07:00
Sergei Shtylyov 3f911a6e6b hpt366: kill unused #define's
These two have been long unused but I've just noticed...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 03:09:24 -07:00
Mikulas Patocka 9bd7496f5d ide: Serialize CMD643 and CMD646 to fix a hardware bug with SSD
CMD646 corrupts data on concurrent transfers on both channels when IDE SSD is
connected to one of the channels.

Setup that demonstrates this hardware bug: Ultra 5, onboard CMD646, rev 3.
/dev/hda is 8GB Seagate ST38410A in MWDMA2
/dev/hdd is 32GB SSD SiliconHardDisk in MWDMA2

- When reading /dev/hdd (for example with dd or fsck), reads from /dev/hda
  are corrupted, there are twiddled single bits 1->0 and some full 32-bit
  words corrupted, sometimes commands fail (which switches /dev/hda to
  PIO mode but the corruptions happen even in PIO).
- Reads from /dev/hdd don't seem to be corrupted (i.e. fsck passes fine).
- When I connected normal rotating harddisk to /dev/hdd, there was no
  corruption, so the corruption is something specific to SSD.
- I tried the same setup on a PCI card with CMD649 and saw no corruption.

This patch serializes the operation for CMD646 and 643 (I didn't test
CMD643 but it may have the same hw bug too because it's earlier design).
CMD649 is good. I don't know anything about CMD 648.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Frans Pop <elendil@planet.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 03:02:06 -07:00
Shane Huang 5deab53665 ahci / atiixp / pci quirks: rename AMD SB900 into Hudson-2
This patch renames the code name SB900 into Hudson-2

Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-16 06:21:20 -04:00
Linus Torvalds df87f344ef Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  Revert "Revert "ide: try to use PIO Mode 0 during probe if possible""
  sis5513: fix PIO setup for ATAPI devices
2009-10-08 11:59:06 -07:00
Bartlomiej Zolnierkiewicz 032665a26f Revert "Revert "ide: try to use PIO Mode 0 during probe if possible""
This reverts commit 24df31acaf.

The root cause of reported system hangs was (now fixed) sis5513 bug
and not "ide: try to use PIO Mode 0 during probe if possible" change
(commit 6029336426) so the revert was
incorrect (it simply replaced one regression with the other one).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07 04:07:18 -07:00
Bartlomiej Zolnierkiewicz e13ee546bb sis5513: fix PIO setup for ATAPI devices
Clear prefetch setting before potentially (re-)enabling it in
config_drive_art_rwp() so the transition of the device type on
the port from ATA to ATAPI (i.e. during warm-plug operation)
is handled correctly.

This is a really old bug (it probably goes back to very early
days of the driver) but it was only affecting warm-plug operation
until the recent "ide: try to use PIO Mode 0 during probe if
possible" change (commit 6029336426).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Tested-by: David Fries <david@fries.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07 04:07:17 -07:00
Linus Torvalds 0eca52a927 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  Revert "ide: try to use PIO Mode 0 during probe if possible"
  ide: use printk_once
2009-10-05 14:39:22 -07:00
David S. Miller 24df31acaf Revert "ide: try to use PIO Mode 0 during probe if possible"
This reverts commit 6029336426.

Based upon a report by David Fries, wherein his system hangs
on bootup with sis5513 controller, right after the CDROM
is registered by ide-cd.c and the TOC is first read.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-04 21:00:17 -07:00
Linus Torvalds c11f6c8258 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (119 commits)
  ACPI: don't pass handle for fixed hardware notifications
  ACPI: remove null pointer checks in deferred execution path
  ACPI: simplify deferred execution path
  acerhdf: additional BIOS versions
  acerhdf: convert to dev_pm_ops
  acerhdf: fix fan control for AOA150 model
  thermal: add missing Kconfig dependency
  acpi: switch /proc/acpi/{debug_layer,debug_level} to seq_file
  hp-wmi: fix rfkill memory leak on unload
  ACPI: remove unnecessary #ifdef CONFIG_DMI
  ACPI: linux/acpi.h should not include linux/dmi.h
  hwmon driver for ACPI 4.0 power meters
  topstar-laptop: add new driver for hotkeys support on Topstar N01
  thinkpad_acpi: fix rfkill memory leak on unload
  thinkpad-acpi: report brightness events when required
  thinkpad-acpi: don't poll by default any of the reserved hotkeys
  thinkpad-acpi: Fix procfs hotkey reset command
  thinkpad-acpi: deprecate hotkey_bios_mask
  thinkpad-acpi: hotkey poll fixes
  thinkpad-acpi: be more strict when detecting a ThinkPad
  ...
2009-09-23 09:32:11 -07:00
Marcin Slusarz 01f1afaf7b ide: use printk_once
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-22 16:29:00 -07:00
Linus Torvalds 342ff1a1b5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  trivial: fix typo in aic7xxx comment
  trivial: fix comment typo in drivers/ata/pata_hpt37x.c
  trivial: typo in kernel-parameters.txt
  trivial: fix typo in tracing documentation
  trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.c
  trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.c
  trivial: remove unnecessary semicolons
  trivial: Fix duplicated word "options" in comment
  trivial: kbuild: remove extraneous blank line after declaration of usage()
  trivial: improve help text for mm debug config options
  trivial: doc: hpfall: accept disk device to unload as argument
  trivial: doc: hpfall: reduce risk that hpfall can do harm
  trivial: SubmittingPatches: Fix reference to renumbered step
  trivial: fix typos "man[ae]g?ment" -> "management"
  trivial: media/video/cx88: add __init/__exit macros to cx88 drivers
  trivial: fix typo in CONFIG_DEBUG_FS in gcov doc
  trivial: fix missing printk space in amd_k7_smp_check
  trivial: fix typo s/ketymap/keymap/ in comment
  trivial: fix typo "to to" in multiple files
  trivial: fix typos in comments s/DGBU/DBGU/
  ...
2009-09-22 07:51:45 -07:00
Alexey Dobriyan 83d5cde47d const: make block_device_operations const
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:25 -07:00
Joe Perches a419aef8b8 trivial: remove unnecessary semicolons
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-21 15:14:58 +02:00
Len Brown 985f38781d Merge branch 'acpica' into release 2009-09-19 01:45:22 -04:00
Linus Torvalds 0cb583fd28 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6:
  ide: fixup for fujitsu disk
  ide: convert to ->proc_fops
  at91_ide: remove headers specific for at91sam9263
  IDE: palm_bk3710: convert clock usage after clkdev conversion
  ide: fix races in handling of user-space SET XFER commands
  ide: allow ide_dev_read_id() to be called from the IRQ context
  ide: ide-taskfile.c fix style problems
  drivers/ide/ide-cd.c: Use DIV_ROUND_CLOSEST
  ide-tape: fix handling of postponed rqs
  ide-tape: convert to ide_debug_log macro
  ide-tape: fix debug call
  ide: Fix annoying warning in ide_pio_bytes().
  IDE: Save a call to PageHighMem()
2009-09-15 10:01:16 -07:00
Wu Zhangjin a2d10568fd ide: fixup for fujitsu disk
This patch will fix the following problem on Yeeloong netbook with
fujitsu disk.

irq 14: nobody cared (try booting with the "irqpoll" option)
Call Trace:
[<ffffffff8020d438>] dump_stack+0x8/0x40
[<ffffffff8027ec64>] __report_bad_irq+0x58/0xe4
[<ffffffff8027ee6c>] note_interrupt+0x17c/0x23c
[<ffffffff8027f9b8>] handle_level_irq+0xcc/0x134
[<ffffffff802125b0>] mach_irq_dispatch+0xb8/0x1e0
[<ffffffff8020041c>] ret_from_irq+0x0/0x4
[<ffffffff8029e678>] free_hot_cold_page+0x224/0x2a0
[<ffffffff8026f794>] swsusp_free+0xb0/0x14c
[<ffffffff8026ec08>] hibernate+0x198/0x218
[<ffffffff8026cfa8>] state_store+0x90/0x138
[<ffffffff8032b5a4>] sysfs_write_file+0x130/0x194
[<ffffffff802c94fc>] vfs_write+0xb8/0x180
[<ffffffff802c96b8>] SyS_write+0x50/0x98
[<ffffffff80203fd8>] handle_sys+0x158/0x174

handlers:
[<ffffffff80429670>] (ide_intr+0x0/0x300)
Disabling IRQ #14

References:

1. commit 1fde02e7146d4a1bab80fd1506f9018fe71e8521 of
git://dev.lemote.com/linux_loongson.git
2. 8bc1e5aa06 (ide: respect quirk_drives[]
list on all controllers)

Signed-off-by: Yan Hua <yanh@lemote.com>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15 01:36:25 -07:00
Linus Torvalds 86373435d2 Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (25 commits)
  pata_rz1000: use printk_once
  ahci: kill @force_restart and refine CLO for ahci_kick_engine()
  pata_cs5535: add pci id for AMD based CS5535 controllers
  ahci: Add AMD SB900 SATA/IDE controller device IDs
  drivers/ata: use resource_size
  sata_fsl: Defer non-ncq commands when ncq commands active
  libata: add SATA PMP revision information for spec 1.2
  libata: fix off-by-one error in ata_tf_read_block()
  ahci: Gigabyte GA-MA69VM-S2 can't do 64bit DMA
  ahci: make ahci_asus_m2a_vm_32bit_only() quirk more generic
  dmi: extend dmi_get_year() to dmi_get_date()
  dmi: fix date handling in dmi_get_year()
  libata: unbreak TPM filtering by reorganizing ata_scsi_pass_thru()
  sata_sis: convert to slave_link
  sata_sil24: always set protocol override for non-ATAPI data commands
  libata: Export AHCI capabilities
  libata: Delegate nonrot flag setting to SCSI
  [libata] Add pata_rdc driver for RDC ATA devices
  drivers/ata: Remove unnecessary semicolons
  libata: remove spindown skipping and warning
  ...
2009-09-11 16:38:33 -07:00
Shane Huang e2dd90b1ad ahci: Add AMD SB900 SATA/IDE controller device IDs
Add AMD SB900 SATA/IDE controller device IDs.

Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-09-11 02:31:27 -04:00
Alexey Dobriyan 6d703a81ad ide: convert to ->proc_fops
->read_proc, ->write_proc are going away, ->proc_fops should be used instead.

The only tricky place is IDENTIFY handling: if for some reason
taskfile_lib_get_identify() fails, buffer _is_ changed and at least
first byte is overwritten. Emulate old behaviour with returning
that first byte to userspace and reporting length=1 despite overall -E.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 17:52:57 -07:00
Bob Moore 15b8dd53f5 ACPICA: Major update for acpi_get_object_info external interface
Completed a major update for the acpi_get_object_info external interface.
Changes include:
 - Support for variable, unlimited length HID, UID, and CID strings
 - Support Processor objects the same as Devices (HID,UID,CID,ADR,STA, etc.)
 - Call the _SxW power methods on behalf of a device object
 - Determine if a device is a PCI root bridge
 - Change the ACPI_BUFFER parameter to ACPI_DEVICE_INFO.
These changes will require an update to all callers of this interface.
See the ACPICA Programmer Reference for details.

Also, update all invocations of acpi_get_object_info interface

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27 10:17:15 -04:00
Sergey Matyukevich 76fbebfbb5 at91_ide: remove headers specific for at91sam9263
This driver requires only static memory controller definitions and macroses
contained in generic header at91sam9_smc.h.

Those extra headers are misleading since this driver also works fine for
at91sam9260 SoC: tests were performed on afeb9260 board.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15 18:55:09 -07:00
Kevin Hilman 468b5ef8a8 IDE: palm_bk3710: convert clock usage after clkdev conversion
DaVinci core code has converted to the new clkdev API so
clock name strings are not needed.  Instead, just the a
'struct device' pointer is needed.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15 18:55:08 -07:00
Wolfram Sang c9a2bfd1f0 pcmcia: add CNF-CDROM-ID for ide
Fixes this report:
http://article.gmane.org/gmane.linux.kernel.pcmcia.devel/2228/

Reported-by: John McGrath <john@john-mcgrath.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14 13:09:32 -07:00
Bartlomiej Zolnierkiewicz 665d66e8fa ide: fix races in handling of user-space SET XFER commands
* Make cmd->tf_flags field 'u16' and add IDE_TFLAG_SET_XFER taskfile flag.

* Update ide_finish_cmd() to set xfer / re-read id if the new flag is set.

* Convert set_xfer_rate() (write handler for /proc/ide/hd?/current_speed)
  and ide_cmd_ioctl() (HDIO_DRIVE_CMD ioctl handler) to use the new flag.

* Remove no longer needed disable_irq_nosync() + enable_irq() from
  ide_config_drive_speed().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07 10:43:00 -07:00
Bartlomiej Zolnierkiewicz fa56d4cb40 ide: allow ide_dev_read_id() to be called from the IRQ context
* Un-static __ide_wait_stat().

* Allow ide_dev_read_id() helper to be called from the IRQ context by
  adding irq_ctx flag and using mdelay()/__ide_wait_stat() when needed.

* Switch ide_driveid_update() to set irq_ctx flag.

This change is needed for the consecutive patch which fixes races in
handling of user-space SET XFER commands but for improved bisectability
and clarity it is better to do it in a separate patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07 10:42:59 -07:00
Jaswinder Singh Rajput 2d5abcedeb ide: ide-taskfile.c fix style problems
Fix trivial style problems:

WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
WARNING: space prohibited between function name and open parenthesis '('
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
ERROR: do not use C99 // comments X 2
ERROR: trailing statements should be on next line
ERROR: trailing whitespace
ERROR: switch and case should be at the same indent
WARNING: line over 80 characters

total: 5 errors, 4 warnings

Also removed dead code

Also used pr_err() to avoid line breaks

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07 10:42:59 -07:00
Julia Lawall 72db37b2c9 drivers/ide/ide-cd.c: Use DIV_ROUND_CLOSEST
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d
but is perhaps more readable.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@haskernel@
@@

#include <linux/kernel.h>

@depends on haskernel@
expression x,__divisor;
@@

- (((x) + ((__divisor) / 2)) / (__divisor))
+ DIV_ROUND_CLOSEST(x,__divisor)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07 10:42:58 -07:00
Borislav Petkov 6f3848ac23 ide-tape: fix handling of postponed rqs
ide-tape used to hit

[   58.614854] ide-tape: ht0: BUG: Two DSC requests queued!

due to the fact that another rq was being issued while the driver was
waiting for DSC to get set for the device executing ATAPI commands which
set the DSC to 1 to indicate completion.

Here's a sample output of that case:

issue REZERO_UNIT

[  143.088505] ide-tape: ide_tape_issue_pc: retry #0, cmd: 0x01
[  143.095122] ide: Enter ide_pc_intr - interrupt handler
[  143.096118] ide: Packet command completed, 0 bytes transferred
[  143.106319] ide-tape: ide_tape_callback: cmd: 0x1, dsc: 1, err: 0
[  143.112601] ide-tape: idetape_postpone_request: cmd: 0x1, dsc_poll_freq: 2000

we stall the ide-tape queue here waiting for DSC

[  143.119936] ide-tape: ide_tape_read_position: enter
[  145.119019] ide-tape: idetape_do_request: sector: 4294967295, nr_sectors: 0

and issue the new READ_POSITION rq and hit the check.

[  145.126247] ide-tape: ht0: BUG: Two DSC requests queued!
[  145.131748] ide-tape: ide_tape_read_position: BOP - No
[  145.137059] ide-tape: ide_tape_read_position: EOP - No

Also, ->postponed_rq used to point to that postponed request. To make
things worse, in certain circumstances the rq it was pointing to got
replaced unterneath it by swiftly reusing the same rq from the mempool
of the block layer practically confusing stuff even more.

However, we don't need to keep a pointer to that rq but simply wait for
DSC to be set first before issuing the follow-up request in the drive's
queue. In order to do that, we make idetape_do_request() first check the
DSC and if not set, we stall the drive queue giving the other device on
that IDE channel a chance.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07 10:42:57 -07:00
Borislav Petkov e972d7027c ide-tape: convert to ide_debug_log macro
Remove tape->debug_mask and use drive->debug_mask instead.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07 10:42:57 -07:00
Mark de Wever 37bbe084d1 ide-tape: fix debug call
This error only occurs when IDETAPE_DEBUG_LOG is enabled.

Signed-off-by: Mark de Wever <koraq@xs4all.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07 10:42:56 -07:00
David S. Miller 7fa350b475 ide: Fix annoying warning in ide_pio_bytes().
GCC can't see that flags is only set and used when PageHighmem() is
true.

Inspired by a patch from Jean Delvare.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07 10:42:56 -07:00
Jean Delvare a907905219 IDE: Save a call to PageHighMem()
PageHighMem() isn't cheap so avoid calling it twice on the same page.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07 10:42:55 -07:00
Michael Buesch 2fc2111c27 ide-tape: Don't leak kernel stack information
Don't leak kernel stack information through uninitialized structure members.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Acked-by: Borislav Petkov <petkovbb@gmail.com>.
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-21 20:36:25 -07:00
Maxime Bizon bc146d23d1 ide: fix memory leak when flush command is issued
I'm using ide on 2.6.30.1 with xfs filesystem. I noticed a kernel memory
leak after writing lots of data, the kmalloc-96 slab cache keeps
growing. It seems the struct ide_cmd kmalloced by idedisk_prepare_flush
is never kfreed.

Commit a09485df9c ("ide: move request
type specific code from ide_end_drive_cmd() to callers (v3)") and
f505d49ffd ("ide: fix barriers support")
cause this regression, cmd->rq must now be set for ide_complete_cmd to
honor the IDE_TFLAG_DYN flag.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-21 20:23:46 -07:00
David S. Miller 3503e0acbf Revert "ide: improve handling of Power Management requests"
This reverts commit a1317f714a.
2009-07-06 12:39:27 -07:00
Christian Engelmayer e18ed145c7 ide: memory overrun in ide_get_identity_ioctl() on big endian machines using ioctl HDIO_OBSOLETE_IDENTITY
This patch fixes a memory overrun in function ide_get_identity_ioctl() which
chooses the size of a memory buffer depending on the ioctl command that led
to the function call, however, passes that buffer to a function which needs the
buffer size to be always chosen unconditionally.

Due to conditional compilation the memory overrun can only happen on big endian
machines. The error can be triggered using ioctl HDIO_OBSOLETE_IDENTITY. Usage
of ioctl HDIO_GET_IDENTITY is safe.

Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-29 19:31:41 -07:00
Bartlomiej Zolnierkiewicz 2bf427b25b ide: fix resume for CONFIG_BLK_DEV_IDEACPI=y
commit 2f0d0fd2a6 ("ide-acpi: cleanup
do_drive_get_GTF()") didn't account for the lack of hwif->acpidata
check in generic_ide_suspend() [ indirect user of do_drive_get_GTF()
through ide_acpi_exec_tfs() ] resulting in broken resume when ACPI
support is enabled but ACPI data is unavailable.

Fix it by adding ide_port_acpi() helper for checking if port needs
ACPI handling and cleaning generic_ide_{suspend,resume}() to use it
instead of hiding hwif->acpidata and ide_noacpi checks in IDE ACPI
helpers (this should help in preventing similar bugs in the future).

While at it:
- kill superfluous debugging printks in ide_acpi_{get,push}_timing()

Reported-and-tested-by: Etienne Basset <etienne.basset@numericable.fr>
Also-reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-29 19:20:42 -07:00
Borislav Petkov 9c72ebef5a ide-cd: handle fragmented packet commands gracefully
There are some devices in the wild that clear the DRQ bit during the
last word of a packet command and therefore could use a "second chance"
for that last word of data to be xferred instead of simply failing the
request. Do that by attempting to suck in those last bytes in PIO mode.

In addition, the ATA_ERR bit has to be cleared for we cannot be sure the
data is valid otherwise.

See http://bugzilla.kernel.org/show_bug.cgi?id=13399 for details.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-26 11:22:37 -07:00
Bartlomiej Zolnierkiewicz 5e955245d6 ide: always kill the whole request on error
* Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_kill_rq()
  and ide_floppy_do_request() for failed requests.
  [ bugfix part ]

* Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_do_devset()
  and ide_complete_drive_reset().  Then remove ide_rq_bytes().
  [ cleanup part ]

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-25 23:57:16 -07:00
Bartlomiej Zolnierkiewicz 789547508f ide: fix ide_kill_rq() for special ide-{floppy,tape} driver requests
Such requests should be failed with -EIO (like all other requests
in this function) instead of being completed successfully.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-25 23:57:14 -07:00
David S. Miller d7e2f36d9a ide cs5520: Initialize second port's interrupt number.
In 86ccf37c6a the driver was modified
to deal with the removal of the pciirq argument to ide_pci_setup_ports().

But in the conversion only the first port's IRQ gets setup.

Inspired by a patch by Bartlomiej Zolnierkiewicz., and with help from
Alan Cox.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24 02:36:17 -07:00
Bartlomiej Zolnierkiewicz a1317f714a ide: improve handling of Power Management requests
Make hwif->rq point to PM request during PM sequence and do not allow
any other types of requests to slip in (the old comment was never correct
as there should be no such requests generated during PM sequence).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24 00:32:33 -07:00
Bartlomiej Zolnierkiewicz ba9413bd28 ide: add QUANTUM FIREBALLct20 30 with firmware APL.090 to ivb_list[]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24 00:32:32 -07:00
Bartlomiej Zolnierkiewicz 346c17a6cf ide: relax DMA info validity checking
There are some broken devices that report multiple DMA xfer modes
enabled at once (ATA spec doesn't allow it) but otherwise work fine
with DMA so just delete ide_id_dma_bug().

[ As discovered by detective work by Frans and Bart, due to how
  handling of the ID block was handled before commit c419993
  ("ide-iops: only clear DMA words on setting DMA mode") this
  check was always seeing zeros in the fields or other similar
  garbage.  Therefore this check wasn't actually checking anything.
  Now that the tests actually check the real bits, all we see are
  devices that trigger the check yet work perfectly fine, therefore
  killing this useless check is the best thing to do. -DaveM ]

Reported-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24 00:32:32 -07:00
Frans Pop d9ae62433e ide-cd: Improve "weird block size" error message
Currently the error gets repeated too frequently, for example each
time HAL polls the device when a disc is present. Avoid that by using
printk_once instead of printk.

Also join the error and corrective action messages into a single line.

Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24 00:32:31 -07:00
David S. Miller af054ed001 ide-cd: Don't warn on bogus block size unless it actually matters.
Frans Pop reported that his CDROM drive reports a blocksize of 2352,
and this causes new warnings due to commit
e8e7b9eb11 ("ide-cd: fix oops when using
growisofs").

What we're trying to do is make sure that "blocklen >> SECTOR_BITS"
is something the block layer won't choke on.

And for Frans' case "2352 >> SECTOR_BITS" is equal to
"2048 >> SECTOR_BITS", and thats "4".

So warning in this case gives no real benefit.

Reported-by: Frans Pop <elendil@planet.nl>
Tested-by: Frans Pop <elendil@planet.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24 00:32:30 -07:00
Bartlomiej Zolnierkiewicz ffc36c7610 ide: fix handling of unexpected IRQs vs request_irq()
Add ide_host_enable_irqs() helper and use it in ide_host_register()
before registering ports.  Then remove no longer needed IRQ unmasking
from in init_irq().

This should fix the problem with "screaming" shared IRQ on the first
port (after request_irq() call while we have the unexpected IRQ pending
on the second port) which was uncovered by my rework of the serialized
interfaces support.

Reported-by: Frans Pop <elendil@planet.nl>
Tested-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24 00:32:30 -07:00
David S. Miller e01698aed0 ide cmd64x: Remove serialize setting.
This begins to fix regressions reported by Frans Pop on his Ultra-10.

There are still some funnies left that we are investigating.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-21 22:48:03 -07:00
Linus Torvalds e6423407d0 Merge branch 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (34 commits)
  ide-cd: prevent null pointer deref via cdrom_newpc_intr
  ide: BUG() on unknown requests
  ide: filter out invalid DMA xfer mode changes in HDIO_DRIVE_CMD ioctl handler
  ide: do not access ide_drive_t 'drive_data' field directly
  sl82c105: implement test_irq() method
  siimage: implement test_irq() method
  pdc202xx_old: implement test_irq() method (take 2)
  cmd64x: implement test_irq() method
  cmd640: implement test_irq() method
  ide: move ack_intr() method into 'struct ide_port_ops' (take 2)
  ide: move IRQ clearing from ack_intr() method to clear_irq() method (take 2)
  siimage: use ide_dma_test_irq() (take 2)
  cmd64x: implement clear_irq() method (take 2)
  ide: call clear_irq() method in ide_timer_expiry()
  sgiioc4: coding style cleanup
  ide: don't enable IORDY at a probe time
  ide: IORDY handling fixes
  ata: add ata_id_pio_need_iordy() helper (v2)
  ide-tape: fix build issue
  ide: unify interrupt reason checking
  ...
2009-06-20 10:11:11 -07:00
Rainer Weikusat 39c58f37a1 ide-cd: prevent null pointer deref via cdrom_newpc_intr
With 2.6.30, the error handling code in cdrom_newpc_intr was changed
to deal with partial request failures by normally completing the 'good'
parts of a request and only 'error' the last (and presumably,
incompletely transferred) bio associated with a particular
request. In order to do this, ide_complete_rq is called over
ide_cd_error_cmd() to partially complete the rq. The block layer
does partial completion only for requests with bio's and if the
rq doesn't have one (eg 'GPCMD_READ_DISC_INFO') the request is
completed as a whole and the drive->hwif->rq pointer set to NULL
afterwards. When calling ide_complete_rq again to report
the error, this null pointer is derefenced, resulting in a kernel
crash.

This fixes http://bugzilla.kernel.org/show_bug.cgi?id=13399.

Signed-off-by: Rainer Weikusat <rweikusat@mssgmbh.com>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-20 12:22:47 +02:00
Greg Kroah-Hartman fcb5207723 ide: remove driver_data direct access of struct device
In the near future, the driver core is going to not allow direct access
to the driver_data pointer in struct device.  Instead, the functions
dev_get_drvdata() and dev_set_drvdata() should be used.  These functions
have been around since the beginning, so are backwards compatible with
all older kernel versions.

Cc: linux-ide@vger.kernel.org
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:26 -07:00
Bartlomiej Zolnierkiewicz 2c7eaa43c3 ide: BUG() on unknown requests
Unsupported requests should be never handed down to device drivers
and the best thing we can do upon discovering such request inside
driver's ->do_request method is to just BUG().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 22:16:10 +02:00
Bartlomiej Zolnierkiewicz a9c4150907 ide: filter out invalid DMA xfer mode changes in HDIO_DRIVE_CMD ioctl handler
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 22:13:45 +02:00
Joao Ramos 5bfb151f1f ide: do not access ide_drive_t 'drive_data' field directly
Change ide_drive_t 'drive_data' field from 'unsigned int' type to 'void *'
type, allowing a wider range of values/types to be stored in this field.

Added 'ide_get_drivedata' and 'ide_set_drivedata' helpers to get and set
the 'drive_data' field.

Fixed all host drivers to maintain coherency with the change in the
'drive_data' field type.

Signed-off-by: Joao Ramos <joao.ramos@inov.pt>
[bart: fix qd65xx build, cast to 'unsigned long', minor Coding Style fixups]
Acked-by: Sergei Shtylyov <sshtylyov@ru.montavista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 22:13:44 +02:00
Sergei Shtylyov 3779f818a4 sl82c105: implement test_irq() method
Implement test_irq() method.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:53:00 +02:00
Sergei Shtylyov ec053e4ee9 siimage: implement test_irq() method
Implement test_irq() method based on the driver's former dma_test_irq() methods.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:53:00 +02:00
Sergei Shtylyov e0321fbe6d pdc202xx_old: implement test_irq() method (take 2)
Implement test_irq() method based on the driver's former dma_test_irq() method.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:52:59 +02:00
Sergei Shtylyov 628df2f33d cmd64x: implement test_irq() method
Convert the driver's two dma_test_irq() methods into test_irq() methods. The
driver will now use the standard dma_test_irq() method implementation which
allows to remove 'cmd54x_dma_ops' and 'cmd648_dma_ops' that become identical
to 'sff_dma_ops'...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:52:59 +02:00
Sergei Shtylyov 87441db22f cmd640: implement test_irq() method
Implement test_irq() method, adding the drive 2/3 interrupt bit definition.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:52:58 +02:00
Sergei Shtylyov f4d3ffa52a ide: move ack_intr() method into 'struct ide_port_ops' (take 2)
Move the ack_intr() method into 'struct ide_port_ops', also renaming it to
test_irq() while at it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:52:58 +02:00
Sergei Shtylyov eba8999cef ide: move IRQ clearing from ack_intr() method to clear_irq() method (take 2)
There are now two methods that clear the port interrupt: ack_intr() method,
implemented only on M680x0 machines, that is called at the start of ide_intr(),
and clear_irq() method, that is called somewhat later in this function.  In
order to stop this duplication, delegate the task of clearing the interrupt
to clear_irq() method, only leaving to ack_intr() the task of testing for the
port interrupt.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:52:57 +02:00
Sergei Shtylyov 74414a9120 siimage: use ide_dma_test_irq() (take 2)
Remove interrupt bit test (not trusted anyway) from siimage_io_dma_test_irq()
and siimage_mmio_dma_test_irq() -- this allows to replace the former function
with now identical ide_dma_test_irq()...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:52:57 +02:00
Sergei Shtylyov 30e5ffc368 cmd64x: implement clear_irq() method (take 2)
Convert the driver's two dma_end() methods into clear_irq() methods -- the
driver will now use the standard dma_end() method implementation, ide_dma_end().

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:52:56 +02:00
Sergei Shtylyov 53b987d5e7 ide: call clear_irq() method in ide_timer_expiry()
Now the clear_irq() method is called only from ide_intr() but ide_timer_expiry()
also should call this method in case when drive_is_ready() succeeds...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:52:55 +02:00
Sergei Shtylyov ccae50bcf9 sgiioc4: coding style cleanup
Fix several errors and warnings given by checkpatch.pl:

- space between the asterisk and parameter name;

- inconsistent spacing between operator and operands;

- space between *sizeof* and open parenthesis;

- #include <asm/io.h> instead of #include <linux/io.h>

- use of *typedef* instead of a structure tag;

- line over 80 characters.

In addition to these changes, also do the following:

- indent with tabs instead of spaces;

- put the function's result type and name/parameters on the same line;

- join back the needlessly broken lines;

- get rid of needless type cast in sgiioc4_checkirq();

- remove space between the type cast and the variable name;

- remove commented out field initializer;

- uppercase the acronyms, lowercase the normal words in the comments;

- fix up the multi-line comment style...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:52:55 +02:00
Bartlomiej Zolnierkiewicz 5880b5de71 ide: don't enable IORDY at a probe time
* Add 'unsigned long port_flags' field to ide_hwif_t.

* Add IDE_PFLAG_PROBING port flag and keep it set during probing.

* Fix ide_pio_need_iordy() to not enable IORDY at a probe time
  (IORDY may lead to controller lock up on certain controllers
   if the port is not occupied).

Loosely based on the recent libata's fix by Tejun, thanks to Alan
for the hint that IDE may also need it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:52:54 +02:00
Bartlomiej Zolnierkiewicz c9ef59ff01 ide: IORDY handling fixes
Add ide_pio_need_iordy() helper and convert host drivers to use it.

This fixes it8172, it8213, pdc202xx_old, piix, slc90e66 and siimage
host drivers to handle IORDY correctly.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:52:53 +02:00
Borislav Petkov 79ca743f68 ide-tape: fix build issue
This fixes

drivers/ide/ide-tape.c: In function `idetape_chrdev_open':
drivers/ide/ide-tape.c:1515: error: implicit declaration of function `idetape_read_position'
make[1]: *** [drivers/ide/ide-tape.o] Error 1

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:52:52 +02:00
Linus Torvalds 489f7ab6c1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (31 commits)
  trivial: remove the trivial patch monkey's name from SubmittingPatches
  trivial: Fix a typo in comment of addrconf_dad_start()
  trivial: usb: fix missing space typo in doc
  trivial: pci hotplug: adding __init/__exit macros to sgi_hotplug
  trivial: Remove the hyphen from git commands
  trivial: fix ETIMEOUT -> ETIMEDOUT typos
  trivial: Kconfig: .ko is normally not included in module names
  trivial: SubmittingPatches: fix typo
  trivial: Documentation/dell_rbu.txt: fix typos
  trivial: Fix Pavel's address in MAINTAINERS
  trivial: ftrace:fix description of trace directory
  trivial: unnecessary (void*) cast removal in sound/oss/msnd.c
  trivial: input/misc: Fix typo in Kconfig
  trivial: fix grammo in bus_for_each_dev() kerneldoc
  trivial: rbtree.txt: fix rb_entry() parameters in sample code
  trivial: spelling fix in ppc code comments
  trivial: fix typo in bio_alloc kernel doc
  trivial: Documentation/rbtree.txt: cleanup kerneldoc of rbtree.txt
  trivial: Miscellaneous documentation typo fixes
  trivial: fix typo milisecond/millisecond for documentation and source comments.
  ...
2009-06-14 13:46:25 -07:00
Bartlomiej Zolnierkiewicz 8dcce40813 Merge branch 'bp-remove-pc-buf' into for-next
Conflicts:
	drivers/ide/ide-tape.c
2009-06-13 12:00:54 +02:00
Linus Torvalds d614aec475 Merge branch 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (29 commits)
  ide: re-implement ide_pci_init_one() on top of ide_pci_init_two()
  ide: unexport ide_find_dma_mode()
  ide: fix PowerMac bootup oops
  ide: skip probe if there are no devices on the port (v2)
  sl82c105: add printk() logging facility
  ide-tape: fix proc warning
  ide: add IDE_DFLAG_NIEN_QUIRK device flag
  ide: respect quirk_drives[] list on all controllers
  hpt366: enable all quirks for devices on quirk_drives[] list
  hpt366: sync quirk_drives[] list with pdc202xx_{new,old}.c
  ide: remove superfluous SELECT_MASK() call from do_rw_taskfile()
  ide: remove superfluous SELECT_MASK() call from ide_driveid_update()
  icside: remove superfluous ->maskproc method
  ide-tape: fix IDE_AFLAG_* atomic accesses
  ide-tape: change IDE_AFLAG_IGNORE_DSC non-atomically
  pdc202xx_old: kill resetproc() method
  pdc202xx_old: don't call pdc202xx_reset() on IRQ timeout
  pdc202xx_old: use ide_dma_test_irq()
  ide: preserve Host Protected Area by default (v2)
  ide-gd: implement block device ->set_capacity method (v2)
  ...
2009-06-12 09:29:42 -07:00
Pavel Machek 4737f0978d trivial: Kconfig: .ko is normally not included in module names
.ko is normally not included in Kconfig help, make it consistent.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 18:01:50 +02:00
Martin Olsson 19af5cdb7c trivial: fix typo milisecond/millisecond for documentation and source comments.
Signed-off-by: Martin Olsson <martin@minimum.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 18:01:46 +02:00
Linus Torvalds c9059598ea Merge branch 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits)
  block: add request clone interface (v2)
  floppy: fix hibernation
  ramdisk: remove long-deprecated "ramdisk=" boot-time parameter
  fs/bio.c: add missing __user annotation
  block: prevent possible io_context->refcount overflow
  Add serial number support for virtio_blk, V4a
  block: Add missing bounce_pfn stacking and fix comments
  Revert "block: Fix bounce limit setting in DM"
  cciss: decode unit attention in SCSI error handling code
  cciss: Remove no longer needed sendcmd reject processing code
  cciss: change SCSI error handling routines to work with interrupts enabled.
  cciss: separate error processing and command retrying code in sendcmd_withirq_core()
  cciss: factor out fix target status processing code from sendcmd functions
  cciss: simplify interface of sendcmd() and sendcmd_withirq()
  cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code
  cciss: Use schedule_timeout_uninterruptible in SCSI error handling code
  block: needs to set the residual length of a bidi request
  Revert "block: implement blkdev_readpages"
  block: Fix bounce limit setting in DM
  Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt
  ...

Manually fix conflicts with tracing updates in:
	block/blk-sysfs.c
	drivers/ide/ide-atapi.c
	drivers/ide/ide-cd.c
	drivers/ide/ide-floppy.c
	drivers/ide/ide-tape.c
	include/trace/events/block.h
	kernel/trace/blktrace.c
2009-06-11 11:10:35 -07:00
Linus Torvalds 27951daa71 Merge branch 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (28 commits)
  ide-tape: fix debug call
  alim15x3: Remove historical hacks, re-enable init_hwif for PowerPC
  ide-dma: don't reset request fields on dma_timeout_retry()
  ide: drop rq->data handling from ide_map_sg()
  ide-atapi: kill unused fields and callbacks
  ide-tape: simplify read/write functions
  ide-tape: use byte size instead of sectors on rw issue functions
  ide-tape: unify r/w init paths
  ide-tape: kill idetape_bh
  ide-tape: use standard data transfer mechanism
  ide-tape: use single continuous buffer
  ide-atapi,tape,floppy: allow ->pc_callback() to change rq->data_len
  ide-tape,floppy: fix failed command completion after request sense
  ide-pm: don't abuse rq->data
  ide-cd,atapi: use bio for internal commands
  ide-atapi: convert ide-{floppy,tape} to using preallocated sense buffer
  ide-cd: convert to using generic sense request
  ide: add helpers for preparing sense requests
  ide-cd: don't abuse rq->buffer
  ide-atapi: don't abuse rq->buffer
  ...
2009-06-11 10:00:03 -07:00
Bartlomiej Zolnierkiewicz ad7c52d098 ide: re-implement ide_pci_init_one() on top of ide_pci_init_two()
There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-10 14:37:21 +02:00
Bartlomiej Zolnierkiewicz 5df3bc2d35 ide: unexport ide_find_dma_mode()
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-10 14:37:21 +02:00
Hugh Dickins 5f4417a156 ide: fix PowerMac bootup oops
PowerMac bootup with CONFIG_IDE=y oopses in ide_pio_cycle_time():
because "ide: try to use PIO Mode 0 during probe if possible" causes
pmac_ide_set_pio_mode() to be called before drive->id has been set.

Bart points out other places which now need drive->id set earlier,
so follow his advice to allocate it in ide_port_alloc_devices()
(using kzalloc_node, without error message, as when allocating drive)
and memset it for reuse in ide_port_init_devices_data().

Fixed in passing: ide_host_alloc() was missing ide_port_free_devices()
from an error path.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Joao Ramos <joao.ramos@inov.pt>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-10 14:37:20 +02:00
Bartlomiej Zolnierkiewicz a20b2a44ec ide: skip probe if there are no devices on the port (v2)
In ide_probe_port() skip probe if ide_port_wait_ready() returns -ENODEV
and print error message instead of debug one if it returns -EBUSY.

v2:
Fix the default 'rc' value.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-08 22:07:28 +02:00
Sergei Shtylyov 75c2d7d71a sl82c105: add printk() logging facility
Add missing printk() logging facility in sl82c105_dma_lost_irq().

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-08 22:03:03 +02:00
Borislav Petkov 9d01e4cd7e ide-tape: fix proc warning
ide_tape_chrdev_get() was missing an ide_device_get() refcount increment
which lead to the following warning:

[  278.147906] ------------[ cut here ]------------
[  278.152685] WARNING: at fs/proc/generic.c:847 remove_proc_entry+0x199/0x1b8()
[  278.160070] Hardware name: P4I45PE    1.00
[  278.160076] remove_proc_entry: removing non-empty directory 'ide0/hdb', leaking at least 'name'
[  278.160080] Modules linked in: rtc intel_agp pcspkr thermal processor thermal_sys parport_pc parport agpgart button
[  278.160100] Pid: 2312, comm: mt Not tainted 2.6.30-rc2 #3
[  278.160105] Call Trace:
[  278.160117]  [<c012141d>] warn_slowpath+0x71/0xa0
[  278.160126]  [<c035f219>] ? _spin_unlock_irqrestore+0x29/0x2c
[  278.160132]  [<c011c686>] ? try_to_wake_up+0x1b6/0x1c0
[  278.160141]  [<c011c69b>] ? default_wake_function+0xb/0xd
[  278.160149]  [<c0177ead>] ? pollwake+0x4a/0x55
[  278.160156]  [<c035f240>] ? _spin_unlock+0x24/0x26
[  278.160163]  [<c0165d38>] ? add_partial+0x44/0x49
[  278.160169]  [<c01669e8>] ? __slab_free+0xba/0x29c
[  278.160177]  [<c01a13d8>] ? sysfs_delete_inode+0x0/0x3c
[  278.160184]  [<c019ca92>] remove_proc_entry+0x199/0x1b8
[  278.160191]  [<c01a297e>] ? remove_dir+0x27/0x2e
[  278.160199]  [<c025f3ab>] ide_proc_unregister_device+0x40/0x4c
[  278.160207]  [<c02599cd>] drive_release_dev+0x14/0x47
[  278.160214]  [<c0250538>] device_release+0x35/0x5a
[  278.160221]  [<c01f8bed>] kobject_release+0x40/0x50
[  278.160226]  [<c01f8bad>] ? kobject_release+0x0/0x50
[  278.160232]  [<c01f96ac>] kref_put+0x3c/0x4a
[  278.160238]  [<c01f8b29>] kobject_put+0x37/0x3c
[  278.160243]  [<c025020c>] put_device+0xf/0x11
[  278.160249]  [<c025789f>] ide_device_put+0x2d/0x30
[  278.160255]  [<c02658da>] ide_tape_put+0x24/0x32
[  278.160261]  [<c0266e0c>] idetape_chrdev_release+0x17f/0x18e
[  278.160269]  [<c016c4f5>] __fput+0xca/0x175
[  278.160275]  [<c016c5b9>] fput+0x19/0x1b
[  278.160280]  [<c0169d19>] filp_close+0x51/0x5b
[  278.160286]  [<c0169d96>] sys_close+0x73/0xad
[  278.160293]  [<c0102a61>] syscall_call+0x7/0xb
[  278.160298] ---[ end trace f16d907ea1f89336 ]---

Instead of trivially fixing it by adding the missing call,
ide_tape_chrdev_get() and ide_tape_get() were merged into one function
since both were almost identical. The only difference was that
ide_tape_chrdev_get() was accessing the ide-tape reference through the
idetape_devs[] array of minors instead of through the gendisk.

Accomodate that by adding two additional parameters to ide_tape_get() to
annotate the call site and invoke the proper behavior.

As a result, remove ide_tape_chrdev_get().

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-08 22:03:03 +02:00
Bartlomiej Zolnierkiewicz 734affdcae ide: add IDE_DFLAG_NIEN_QUIRK device flag
Add IDE_DFLAG_NIEN_QUIRK device flag and use it instead of
drive->quirk_list.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 15:37:10 +02:00
Bartlomiej Zolnierkiewicz 8bc1e5aa06 ide: respect quirk_drives[] list on all controllers
* Add ide_check_nien_quirk_list() helper to the core code
  and then use it in ide_port_tune_devices().

* Remove no longer needed ->quirkproc methods from hpt366.c
  and pdc202xx_{new,old}.c.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 15:37:09 +02:00
Bartlomiej Zolnierkiewicz 0fcef027f6 hpt366: enable all quirks for devices on quirk_drives[] list
Enable also quirks in do_reset1() and ide_config_drive_speed()
for devices on quirk_drives[] list.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 15:37:08 +02:00
Bartlomiej Zolnierkiewicz d328e7657d hpt366: sync quirk_drives[] list with pdc202xx_{new,old}.c
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 15:37:07 +02:00
Bartlomiej Zolnierkiewicz d6dcdea726 ide: remove superfluous SELECT_MASK() call from do_rw_taskfile()
With ->write_devctl method call (which unmasks drive IRQ) preceding
SELECT_MASK() call there is really no need for the latter.

Moreover with the combination of HPT36x controller and the drive on
the quirk_drives[] list this can result in superfluous enable_irq()
call which in turn will trigger WARN() in __enable_irq().

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 15:37:07 +02:00
Bartlomiej Zolnierkiewicz f9952beeaa ide: remove superfluous SELECT_MASK() call from ide_driveid_update()
We always call SELECT_MASK(drive, 0) after ide_dev_read_id() call
so there is no need to do it again in the error path.

Moreover with the combination of HPT36x controller and the drive on
the quirk_drives[] list this can result in superfluous enable_irq()
call which in turn will trigger WARN() in __enable_irq().

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 15:37:06 +02:00
Bartlomiej Zolnierkiewicz dff8817b78 icside: remove superfluous ->maskproc method
[inspired by pata_icside]

Enabling/disabling of card IRQs is handled fine by IRQ and IDE
subsystems so there is no need for custom ->maskproc method.

Moreover icside_maskproc() would enable IRQ only if it was already
enabled [because of 'if (state->enabled && !mask)' check].

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 15:37:06 +02:00
Borislav Petkov 49d8078ad1 ide-tape: fix IDE_AFLAG_* atomic accesses
These flags used to be bit numbers and now are single bits in the
->atapi_flags vector. Use them properly.

Spotted-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 15:37:06 +02:00
Borislav Petkov 626542ca22 ide-tape: change IDE_AFLAG_IGNORE_DSC non-atomically
There are two sites where the flag is being changed: ide_retry_pc
and idetape_do_request. Both codepaths are protected by hwif->busy
(ide_lock_port) and therefore we shouldn't need the atomic accesses.

Spotted-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 15:37:05 +02:00
Sergei Shtylyov ffddf1717b pdc202xx_old: kill resetproc() method
The driver's resetproc() method resets both channels at once -- most probably
by driving RESET- on them.  Not only such reset can severely disturb concurrent
operations on another channel, it also ensues 2-second delay, while there's no
apparent reason why SRST reset being performed prior to resetproc() call needs
to be followed up by another reset.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 15:37:05 +02:00
Sergei Shtylyov 1221e241e3 pdc202xx_old: don't call pdc202xx_reset() on IRQ timeout
The driver's dma_lost_irq() and dma_clear() methods call pdc202xx_reset()
which resets both channels at once -- most probably by driving RESET- on them.
Not only such reset can severely disturb concurrent operations on another
channel, it is also a clear overkill (especially in the first case) and is
completely unexpected and thus not properly handled by the IDE core in this
context (in the second case the usual SRST reset would most probably ensue
anyway though); it also causes quite arbitrary 2-second delay. Hence, use the
standard ide_dma_lost_irq() method and don't install the optional dma_clear()
method at all -- the driver should do well without this age-old cruft...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 15:37:04 +02:00
Sergei Shtylyov 72b9304f04 pdc202xx_old: use ide_dma_test_irq()
The driver's dma_test_irq() method, although tests some chip specific interrupt
bits, finally always relies on the SFF-8038i standard interrupt bit.  I see no
point in testing the bits that are not trusted anyway -- the driver should be
fully able to use the standard method implemetation, ide_dma_test_irq().

With this change 'pdc202xx_dma_ops' finally becomes identical to 'sff_dma_ops',
and we can get rid of it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 15:37:03 +02:00
Bartlomiej Zolnierkiewicz 6250d3af2a Merge branch 'for-linus' into for-next 2009-06-07 14:27:11 +02:00
Bartlomiej Zolnierkiewicz 075affcbe0 ide: preserve Host Protected Area by default (v2)
From the perspective of most users of recent systems, disabling Host
Protected Area (HPA) can break vendor RAID formats, GPT partitions and
risks corrupting firmware or overwriting vendor system recovery tools.

Unfortunately the original (kernels < 2.6.30) behavior (unconditionally
disabling HPA and using full disk capacity) was introduced at the time
when the main use of HPA was to make the drive look small enough for the
BIOS to allow the system to boot with large capacity drives.

Thus to allow the maximum compatibility with the existing setups (using
HPA and partitioned with HPA disabled) we automically disable HPA if
any partitions overlapping HPA are detected.  Additionally HPA can also
be disabled using the "nohpa" module parameter (i.e. "ide_core.nohpa=0.0"
to disable HPA on /dev/hda).

v2:
Fix ->resume HPA support.

While at it:
- remove stale "idebus=" entry from Documentation/kernel-parameters.txt

Cc: Robert Hancock <hancockrwd@gmail.com>
Cc: Frans Pop <elendil@planet.nl>
Cc: "Andries E. Brouwer" <Andries.Brouwer@cwi.nl>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
[patch description was based on input from Alan Cox and Frans Pop]
Emphatically-Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 13:52:52 +02:00
Bartlomiej Zolnierkiewicz e957b60d15 ide-gd: implement block device ->set_capacity method (v2)
* Use ->probed_capacity to store native device capacity for ATA disks.

* Add ->set_capacity method to struct ide_disk_ops.

* Implement disk device ->set_capacity method for ATA disks.

* Implement block device ->set_capacity method.

v2:
* Check if LBA and HPA are supported in ide_disk_set_capacity().

* According to the spec the SET MAX ADDRESS command shall be
  immediately preceded by a READ NATIVE MAX ADDRESS command.

* Add ide_disk_hpa_{get_native,set}_capacity() helpers.

Together with the previous patch adding ->set_capacity block device
method this allows automatic disabling of Host Protected Area (HPA)
if any partitions overlapping HPA are detected.

Cc: Robert Hancock <hancockrwd@gmail.com>
Cc: Frans Pop <elendil@planet.nl>
Cc: "Andries E. Brouwer" <Andries.Brouwer@cwi.nl>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Emphatically-Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 13:52:52 +02:00
Sergei Shtylyov 669165daad pdc202xx_old: fix resetproc() method
pdc202xx_reset() calls pdc202xx_reset_host() twice, for both channels, while
that function actually twiddles the single, shared software reset bit -- the
net effect is a duplicated reset and horrendous 4 second delay happening not
only on a channel reset but also when dma_lost_irq() and dma_clear() methods
are called.  Fold pdc202xx_reset_host() into pdc202xx_reset(), fix printk(),
and move it before the actual reset...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 13:52:50 +02:00
Sergei Shtylyov 521a415c9f pdc202xx_old: fix 'pdc20246_dma_ops'
Commit ac95beedf8 (ide: add struct ide_port_ops
(take 2)) erroneously converted the driver's dma_timeout() and dma_lost_irq()
methods to call the driver's resetproc() method regardless of whether it was
defined for this specific controller while it hadn't been defined and hence
called for PDC20246. So the dma_clear() method, the successor of dma_timeout(),
shouldn't exist and the dma_lost_irq() method should be standard for PDC20246.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 13:52:50 +02:00
Bartlomiej Zolnierkiewicz c339dfdd65 ide_pci_generic: add quirk for Netcell ATA RAID
We need to explicitly mark words 85-87 as valid ones since
firmware doesn't do it.

This should fix support for LBA48 and FLUSH CACHE [EXT] command
which stopped working after we applied more strict checking of
identify words in:

	commit 942dcd85bf
	("ide: idedisk_supports_lba48() -> ata_id_lba48_enabled()")

and

	commit 4b58f17d7c
	("ide: ide_id_has_flush_cache() -> ata_id_flush_enabled()")

Reported-and-tested-by: "Trevor Hemsley" <trevor.hemsley@ntlworld.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-30 20:06:54 +02:00
Martin K. Petersen 3b77f777b8 ide-disk: fix missing max_sectors accessor function
The recent move to accessor functions for querying queue limits
missed an entry in ide-disk.c:

drivers/ide/ide-disk.c: In function ‘ide_disk_setup’:
drivers/ide/ide-disk.c:642: error: ‘struct request_queue’ has no member named ‘max_sectors’

Fix it.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-23 08:23:16 +02:00
Martin K. Petersen e1defc4ff0 block: Do away with the notion of hardsect_size
Until now we have had a 1:1 mapping between storage device physical
block size and the logical block sized used when addressing the device.
With SATA 4KB drives coming out that will no longer be the case.  The
sector size will be 4KB but the logical block size will remain
512-bytes.  Hence we need to distinguish between the physical block size
and the logical ditto.

This patch renames hardsect_size to logical_block_size.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 23:22:54 +02:00
Jens Axboe 9bd7de51ee Merge branch 'master' into for-2.6.31
Conflicts:
	drivers/ide/ide-io.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 20:28:35 +02:00
Jens Axboe e4b636366c Merge branch 'master' into for-2.6.31
Conflicts:
	drivers/block/hd.c
	drivers/block/mg_disk.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 20:25:34 +02:00
Bartlomiej Zolnierkiewicz 4c9773ed79 Merge branch 'for-linus' into for-next 2009-05-22 17:10:55 +02:00
Harald Welte 5993856e53 via82cxxx: Add VIA VX855 PCI Device ID
This patch adds the PCI Device ID 0xc409 to the PCI ID table of via82cxxx.c,
as well as the 0x8409 south bridge ID.

This is required to make the IDE driver work on the VX855/VX875 integrated
chipset.

Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Bruce Chang <BruceChang@via.com.tw>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22 16:23:39 +02:00
Bartlomiej Zolnierkiewicz 28ee9bc5cc ide: report timeouts in ide_busy_sleep()
* change 'hwif' argument to 'drive'
* report an error on timeout

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22 16:23:38 +02:00
Bartlomiej Zolnierkiewicz cc30137a22 ide: improve failed opcode reporting
Nowadays we (almost) always store the currently executing command
in hwif->cmd so we can use it for the failed opcode reporting.

Cc: Martin Lottermoser <Martin.Lottermoser@t-online.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22 16:23:38 +02:00
Bartlomiej Zolnierkiewicz 26bfcf21e2 ide: fix printk() levels in ide_dump_ata[pi]_error()
Fixes "<3>" in error messages like this one:

hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 }

Reported-by: Martin Lottermoser <Martin.Lottermoser@t-online.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22 16:23:37 +02:00
Bartlomiej Zolnierkiewicz e3b29f0512 ide: fix OOPS during ide-cd error recovery
On Tuesday 19 May 2009 20:29:28 Martin Lottermoser wrote:

>   hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 }
>   ide: failed opcode was: unknown
>   hdc: DMA disabled
>   ------------[ cut here ]------------
>   kernel BUG at drivers/ide/ide-io.c:872!

It is possible for ide-cd to ignore ide_error()'s return value under
some circumstances.  Workaround it in ide_intr() and ide_timer_expiry()
by checking if there is a device/port reset pending currently.

Fixes bug #13345:

	http://bugzilla.kernel.org/show_bug.cgi?id=13345

Reported-by: Martin Lottermoser <Martin.Lottermoser@t-online.de>
Reported-and-tested-by: Modestas Vainius <modestas@vainius.eu>
Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22 16:23:37 +02:00
Bartlomiej Zolnierkiewicz 8369d5fa63 ide: fix 40-wire cable detection for TSST SH-S202* ATAPI devices (v2)
Since 2.6.26 we support UDMA66 on ATAPI devices requiring IVB quirk:

  commit 8588a2b732
  ("ide: add SH-S202J to ivb_list[]")

We also later added support for more such devices in:

  commit e97564f362
  ("ide: More TSST drives with broken cable detection")

and in:

  commit 3ced5c49bd
  ("ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[]")

It turns out that such devices lack cable detection altogether
(which in turn results in incorrect detection of 40-wire cables
by our current cable detection strategy) so always handle them
by trusting host-side cable detection only.

v2:
Model detection fixup from Martin.

Reported-and-tested-by: Martin Lottermoser <Martin.Lottermoser@t-online.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22 16:23:36 +02:00
Tejun Heo 5f49f63178 block: set rq->resid_len to blk_rq_bytes() on issue
In commit c3a4d78c58, while introducing
rq->resid_len, the default value of residue count was changed from
full count to zero.  The conversion was done under the assumption that
when a request fails residue count wasn't defined.  However, Boaz and
James pointed out that this wasn't true and the residue count should
be preserved for failed requests too.

This patchset restores the original behavior by setting rq->resid_len
to blk_rq_bytes(rq) on request start and restoring explicit clearing
in affected drivers.  While at it, take advantage of the fact that
rq->resid_len is set to full count where applicable.

* ide-cd: rq->resid_len cleared on pc success

* mptsas: req->resid_len cleared on success

* sas_expander: rsp/req->resid_len cleared on success

* mpt2sas_transport: req->resid_len cleared on success

* ide-cd, ide-tape, mptsas, sas_host_smp, mpt2sas_transport, ub: take
  advantage of initial full count to simplify code

Boaz Harrosh spotted bug in resid_len initialization.  Fixed as
suggested.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Borislav Petkov <petkovbb@googlemail.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-19 11:36:08 +02:00
Bartlomiej Zolnierkiewicz 9f36d31437 ide: remove hw_regs_t typedef
Remove hw_regs_t typedef and rename struct hw_regs_s to struct ide_hw.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 19:12:25 +02:00
Bartlomiej Zolnierkiewicz dca3983059 ide: pass number of ports to ide_host_{alloc,add}() (v2)
Pass number of ports to ide_host_{alloc,add}() and then update
all users accordingly.

v2:
- drop no longer needed NULL initializers in buddha.c, cmd640.c and gayle.c
  (noticed by Sergei)

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 19:12:24 +02:00
Bartlomiej Zolnierkiewicz 29e52cf793 ide: remove chipset field from hw_regs_t
* Convert host drivers that still use hw_regs_t's chipset field to use
  the one in struct ide_port_info instead.

* Move special handling of ide_pci chipset type from ide_hw_configure()
  to ide_init_port().

* Remove chipset field from hw_regs_t.

While at it:
- remove stale comment in delkin_cb.c

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 19:12:22 +02:00
Bartlomiej Zolnierkiewicz ca1b96e00a ide: replace special_t typedef by IDE_SFLAG_* flags
Replace:
- special_t typedef by IDE_SFLAG_* flags
- 'special_t special' ide_drive_t's field by 'u8 special_flags' one

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 19:12:21 +02:00
Bartlomiej Zolnierkiewicz 582078ee3d ide: merge ide_disk_special() into do_special() (v2)
While at it:
- change debug printk() level to KERN_DEBUG and use __func__
- update documentation

v2:
- fix DEBUG build (noticed by Sergei)

There should be no functional changes caused by this patch.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 19:12:18 +02:00
Bartlomiej Zolnierkiewicz 5f582c8e21 ide: BUG() on unknown flags in ide_disk_special()
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 19:12:18 +02:00
Joao Ramos 6029336426 ide: try to use PIO Mode 0 during probe if possible
Initially set PIO Mode 0 for all host drivers that have a 'set_pio_mode'
method before the IDE core figures out the most suited PIO mode for the
attached device.

Signed-off-by: Joao Ramos <joao.ramos@inov.pt>
Cc: Sergei Shtylyov <sshtylyov@ru.montavista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 17:22:54 +02:00
Mark de Wever e8e7526c3c ide-tape: fix debug call
This error only occurs when IDETAPE_DEBUG_LOG is enabled.

Signed-off-by: Mark de Wever <koraq@xs4all.nl>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 17:22:53 +02:00
Bartlomiej Zolnierkiewicz fdac1c76be Merge branch 'for-linus' into for-next 2009-05-16 19:49:03 +02:00
Alan Cox d8788298d4 piix: The Sony TZ90 needs the cable type hardcoding
The Sony TZ90 needs the cable type hardcoding. See bug #12734

Signed-off-by: Alan Cox <alan@linux.intel.com>
Reported-by:  Jonathan E. Snow <jesnow@uh.edu>
[bart: port it from ata_piix to piix and give reporter the proper credit]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-16 19:03:36 +02:00
Sergei Shtylyov b019447ce7 icside: register second channel of version 6 PCB
The second IDE channel of version 6 PCB is not being registered anymore since
the commit 48c3c10726 (ide: add struct ide_host
(take 3)).

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-16 19:03:36 +02:00
Tejun Heo 36999a5af1 ide-tape: remove back-to-back REQUEST_SENSE detection
Impact: fix an oops which always triggers

ide_tape_issue_pc() assumed drive->pc isn't NULL on invocation when
checking for back-to-back request sense issues but drive->pc can be
NULL and even when it's not NULL, it's not safe to dereference it once
the previous command is complete because pc could have been freed or
was on stack.  Kill back-to-back REQUEST_SENSE detection.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-16 19:03:18 +02:00
Borislav Petkov 103f7033bd ide: unify interrupt reason checking
Add ide_check_ireason() function that handles all ATAPI devices.
Reorganize all unlikely cases in ireason checking further down in the
code path.

In addition, add PFX for printks originating from ide-atapi. Finally,
remove ide_cd_check_ireason.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:45 +02:00
Borislav Petkov 239f7e2534 ide-cd: use whole request_sense buffer in EH
Now that we use a static request_sense buffer, use it instead of the
first 18 bytes only. Also, remove sense-arg to cdrom_analyze_sense_data
and cdrom_log_sense since we can access it through drive->sense_data
now.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:41 +02:00
Borislav Petkov 19f52a784f ide-atapi: remove pc->buf
Now after all users of pc->buf have been converted, remove the 64B buffer
embedded in each packet command.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:38 +02:00
Borislav Petkov 55ce3a129e ide-tape: fix READ POSITION cmd handling
ide-tape used to issue READ POSITION in several places and the
evaluation of the returned READ POSITION data was done in the
->pc_callback. Convert it to use local buffer and move that
evaluation chunk in the idetape_read_position(). Additionally, fold
idetape_create_read_position_cmd() into it, too, thus concentrating READ
POSITION handling in one method only and making all places call that.

Finally, mv {idetape,ide_tape}_read_position.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:35 +02:00
Borislav Petkov 837272b4f9 ide-tape/ide_tape_get_bsize_from_bdesc: use local buffer
There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:31 +02:00
Borislav Petkov 60cfab85da ide-floppy/ide_floppy_get_format_progress: use local sense buffer
There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:28 +02:00
Borislav Petkov ae3a8387be ide-atapi: use local sense buffer
Access the sense buffer through the bio in ->pc_callback method thus
alleviating the need for the pc->buf pointer.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:23 +02:00
Borislav Petkov 5122e5174f ide-floppy/ide_floppy_format_unit: use local buffer
Pass the buffer into ide_floppy_create_format_unit_cmd instead of using
pc->buf.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:20 +02:00
Borislav Petkov 802e663427 ide-floppy/ide_floppy_get_sfrp_bit: use local buffer
There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:17 +02:00
Borislav Petkov d9a6830764 ide-floppy/ide_floppy_get_flexible_disk_page: use local buffer
There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:13 +02:00
Borislav Petkov b13345f39d ide-atapi: add a buffer-arg to ide_queue_pc_tail
This is in preparation of removing ide_atapi_pc. Expose the buffer as an
argument to ide_queue_pc_tail with later replacing it with local buffer
or even kmalloc'ed one if needed due to stack usage constraints.

Also, add the possibility of passing a NULL-ptr buffer for cmds which
don't transfer data besides the cdb. While at it, switch to local buffer
in idetape_get_mode_sense_results().

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:09 +02:00
Borislav Petkov 5a0e43b5e2 ide-atapi: add a len-parameter to ide_queue_pc_tail
This is in preparation for removing ide_atapi_pc.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:06 +02:00
Borislav Petkov 077e6dba20 ide-atapi: switch to rq->resid_len
Now that we have rq->resid_len, use it to account partial completion
amount during the lifetime of an rq, decrementing it on each successful
transfer. As a result, get rid of now unused pc->xferred.

While at it, remove noisy debug call in ide_prep_sense.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:02 +02:00
Borislav Petkov dfb7e621fa ide-atapi: switch to blk_rq_bytes() on do_request() path
After the recent struct request cleanups, blk_rq_bytes() is guaranteed
to be valid and is the current total length of the rq's bio. Use that
instead of pc->req_xfer in the do_request() path after the command has
been queued

The remaining usage of pc->req_xfer now is only until we map the rq to a
bio.

While at it:

- remove local caching of rq completion length in ide_tape_issue_pc()

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:43:59 +02:00
Borislav Petkov 10c0b3437c ide-tape: fix potential fs requests bug
ide-tape had a potential bug for fs requests when preparing the command
packet: it was writing the transfer length as a number of fixed blocks.
However, the block layer implies 512 byte blocks and ide-tape can have
other block sizes so account for that too.

ide-floppy does this calculation properly with the block size factor
(floppy->bs_factor).

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:43:45 +02:00
Tejun Heo 9934c8c045 block: implement and enforce request peek/start/fetch
Till now block layer allowed two separate modes of request execution.
A request is always acquired from the request queue via
elv_next_request().  After that, drivers are free to either dequeue it
or process it without dequeueing.  Dequeue allows elv_next_request()
to return the next request so that multiple requests can be in flight.

Executing requests without dequeueing has its merits mostly in
allowing drivers for simpler devices which can't do sg to deal with
segments only without considering request boundary.  However, the
benefit this brings is dubious and declining while the cost of the API
ambiguity is increasing.  Segment based drivers are usually for very
old or limited devices and as converting to dequeueing model isn't
difficult, it doesn't justify the API overhead it puts on block layer
and its more modern users.

Previous patches converted all block low level drivers to dequeueing
model.  This patch completes the API transition by...

* renaming elv_next_request() to blk_peek_request()

* renaming blkdev_dequeue_request() to blk_start_request()

* adding blk_fetch_request() which is combination of peek and start

* disallowing completion of queued (not started) requests

* applying new API to all LLDs

Renamings are for consistency and to break out of tree code so that
it's apparent that out of tree drivers need updating.

[ Impact: block request issue API cleanup, no functional change ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: unsik Kim <donari75@gmail.com>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Laurent Vivier <Laurent@lvivier.info>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Stefan Weinhuber <wein@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:52:18 +02:00
Tejun Heo 8f6205cd57 ide: dequeue in-flight request
ide generally has single request in flight and tracks it using
hwif->rq and all state handlers follow the following convention.

* ide_started is returned if the request is in flight.

* ide_stopped is returned if the queue needs to be restarted.  The
  request might or might not have been processed fully or partially.

* hwif->rq is set to NULL, when an issued request completes.

So, dequeueing model can be implemented by dequeueing after fetch,
requeueing if hwif->rq isn't NULL on ide_stopped return and doing
about the same thing on completion / port unlock paths.  These changes
can be made in ide-io proper.

In addition to the above main changes, the following updates are
necessary.

* ide-cd shouldn't dequeue a request when issuing REQUEST SENSE for it
  as the request is already dequeued.

* ide-atapi uses request queue as stack when issuing REQUEST SENSE to
  put the REQUEST SENSE in front of the failed request.  This now
  needs to be done using requeueing.

[ Impact: dequeue in-flight request ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:52:14 +02:00
Tejun Heo 34b7d2c957 ide: cleanup rq->data_len usages
With recent unification of fields, it's now guaranteed that
rq->data_len always equals blk_rq_bytes().  Convert all direct users
to accessors.

[ Impact: convert direct rq->data_len usages to blk_rq_bytes() ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:50:55 +02:00
Tejun Heo 9780e2dd82 ide: convert to rq pos and nr_sectors accessors
ide doesn't manipulate request fields anymore and thus all hard and
their soft equivalents are always equal.  Convert all references to
accessors.

[ Impact: use pos and nr_sectors accessors ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:50:54 +02:00
Tejun Heo 5b93629b45 block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
Implement accessors - blk_rq_pos(), blk_rq_sectors() and
blk_rq_cur_sectors() which return rq->hard_sector, rq->hard_nr_sectors
and rq->hard_cur_sectors respectively and convert direct references of
the said fields to the accessors.

This is in preparation of request data length handling cleanup.

Geert	: suggested adding const to struct request * parameter to accessors
Sergei	: spotted error in patch description

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Ackec-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:50:53 +02:00
Tejun Heo c3a4d78c58 block: add rq->resid_len
rq->data_len served two purposes - the length of data buffer on issue
and the residual count on completion.  This duality creates some
headaches.

First of all, block layer and low level drivers can't really determine
what rq->data_len contains while a request is executing.  It could be
the total request length or it coulde be anything else one of the
lower layers is using to keep track of residual count.  This
complicates things because blk_rq_bytes() and thus
[__]blk_end_request_all() relies on rq->data_len for PC commands.
Drivers which want to report residual count should first cache the
total request length, update rq->data_len and then complete the
request with the cached data length.

Secondly, it makes requests default to reporting full residual count,
ie. reporting that no data transfer occurred.  The residual count is
an exception not the norm; however, the driver should clear
rq->data_len to zero to signify the normal cases while leaving it
alone means no data transfer occurred at all.  This reverse default
behavior complicates code unnecessarily and renders block PC on some
drivers (ide-tape/floppy) unuseable.

This patch adds rq->resid_len which is used only for residual count.

While at it, remove now unnecessasry blk_rq_bytes() caching in
ide_pc_intr() as rq->data_len is not changed anymore.

Boaz	: spotted missing conversion in osd
Sergei	: spotted too early conversion to blk_rq_bytes() in ide-tape

[ Impact: cleanup residual count handling, report 0 resid by default ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:50:53 +02:00
Tejun Heo 9720aef253 ide-tape: don't initialize rq->sector for rw requests
rq->sector is set to the tape->first_frame but it's never actually
used and not even in the correct unit (512 byte sectors).  Don't set
it.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:50:53 +02:00
Anton Vorontsov 03682411b1 alim15x3: Remove historical hacks, re-enable init_hwif for PowerPC
Some time ago we had to disable init_hwif callback for PowerPC builds.
That was because of a historical IRQ overwrite in the driver, which
was causing IDE malfunction on the MPC8610HPCD PowerPC boards.

It's unclear whether this overwrite is still useful, but it is proven
to cause a bit of harm, and today some PowerPC targets (Xilinx ML510,
as reported by Roderick Colenbrander) need the init_hwif, so we have
to re-enable it and remove the overwrite.

Reported-by: Roderick Colenbrander <thunderbird2k@gmail.com>
Suggested-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-30 18:38:01 +02:00
Bartlomiej Zolnierkiewicz 23a39eede5 Merge branch 'for-linus' into for-next 2009-04-30 18:28:35 +02:00
Borislav Petkov 96c1674397 ide-cd: fix REQ_QUIET tests in cdrom_decode_status
Original patch (dfa4411cc3) was buggy.
This is a more proper fix which introduces blk_rq_quiet() macro
alleviating the need for dumb, too short caching variables.

Thanks to Helge Deller and Bart for debugging this.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Reported-and-tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-30 18:24:34 +02:00
Tejun Heo 586cf2681f ide-dma: don't reset request fields on dma_timeout_retry()
Impact: drop unnecessary code

Now that everything uses bio and block operations, there is no need to
reset request fields manually when retrying a request.  Every field is
guaranteed to be always valid.  Drop unnecessary request field
resetting from ide_dma_timeout_retry().

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:33 +02:00
Tejun Heo 5ad960fe8d ide: drop rq->data handling from ide_map_sg()
Impact: remove code path which is no longer necessary

All IDE data transfers now use rq->bio.  Simplify ide_map_sg()
accordingly.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
2009-04-28 07:37:32 +02:00
Tejun Heo 29d1a43710 ide-atapi: kill unused fields and callbacks
Impact: remove fields and code paths which are no longer necessary

Now that ide-tape uses standard mechanisms to transfer data, special
case handling for bh handling can be dropped from ide-atapi.  Drop the
followings.

* pc->cur_pos, b_count, bh and b_data
* drive->pc_update_buffers() and pc_io_buffers().

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:32 +02:00
Tejun Heo 4344d07fb8 ide-tape: simplify read/write functions
Impact: cleanup

idetape_chrdev_read/write() functions are unnecessarily complex when
everything can be handled in a single loop.  Collapse
idetape_add_chrdev_read/write_request() into the rw functions and
simplify the implementation.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:32 +02:00
Tejun Heo 71294cf93d ide-tape: use byte size instead of sectors on rw issue functions
Impact: cleanup

Byte size is what most issue functions deal with, make
idetape_queue_rw_tail() and its wrappers take byte size instead of
sector counts.  idetape_chrdev_read() and write() functions are
converted to use tape->buffer_size instead of ctl from tape->cap.

This cleans up code a little bit and will ease the next r/w
reimplementation.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:32 +02:00
Tejun Heo 3596b66452 ide-tape: unify r/w init paths
Impact: cleanup

Read and write init paths are almost identical.  Unify them into
idetape_init_rw().

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:32 +02:00
Tejun Heo 6cf3d545f7 ide-tape: kill idetape_bh
Impact: kill now unnecessary idetape_bh

With everything using standard mechanisms, there is no need for
idetape_bh anymore.  Kill it and use tape->buf, cur and valid to
describe data buffer instead.

Changes worth mentioning are...

* idetape_queue_rq_tail() now always queue tape->buf and and adjusts
  buffer state properly before completion.

* idetape_pad_zeros() clears the buffer only once.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:31 +02:00
Tejun Heo e998f30b45 ide-tape: use standard data transfer mechanism
Impact: use standard way to transfer data

ide-tape uses rq in an interesting way.  For r/w requests, rq->special
is used to carry a private buffer management structure idetape_bh and
rq->nr_sectors and current_nr_sectors are initialized to the number of
idetape blocks which isn't necessary 512 bytes.  Also,
rq->current_nr_sectors is used to report back the residual count in
units of idetape blocks.

This peculiarity taxes both block layer and ide.  ide-atapi has
different paths and hooks to accomodate it and what a rq means becomes
quite confusing and making changes at the block layer becomes quite
difficult and error-prone.

This patch makes ide-tape use bio instead.  With the previous patch,
ide-tape currently is using single contiguos buffer so replacing it
isn't difficult.  Data buffer is mapped into bio using
blk_rq_map_kern() in idetape_queue_rw_tail().  idetape_io_buffers()
and idetape_update_buffers() are dropped and pc->bh is set to null to
tell ide-atapi to use standard data transfer mechanism and idetape_bh
byte counts are updated by the issuer on completion using the residual
count.

This change also nicely removes the FIXME in ide_pc_intr() where
ide-tape rqs need to be completed using ide_rq_bytes() instead of
blk_rq_bytes() (although this didn't really matter as the request
didn't have bio).

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
2009-04-28 07:37:31 +02:00
Tejun Heo 7b13354eea ide-tape: use single continuous buffer
Impact: simpler buffer allocation and handling, kills OOM, fix DMA transfers

ide-tape has its own multiple buffer mechanism using struct
idetape_bh.  It allocates buffer with decreasing order-of-two
allocations so that it results in minimum number of segments.
However, the implementation is quite complex and works in a way that
no other block or ide driver works necessitating a lot of special case
handling.

The benefit this complex allocation scheme brings is questionable as
PIO or DMA the number of segments (16 maximum) doesn't make any
noticeable difference and it also doesn't negate the need for multiple
order allocation which can fail under memory pressure or high
fragmentation although it does lower the highest order necessary by
one when the buffer size isn't power of two.

As the first step to remove the custom buffer management, this patch
makes ide-tape allocate single continous buffer.  The maximum order is
four.  I doubt the change would cause any trouble but if it ever
matters, it should be converted to regular sg mechanism like everyone
else and even in that case dropping custom buffer handling and moving
to standard mechanism first make sense as an intermediate step.

This patch makes the first bh to contain the whole buffer and drops
multi bh handling code.  Following patches will make further changes.

This patch has the side effect of killing OOM triggered by allocation
path and fixing DMA transfers.  Previously, bug in alloc path
triggered OOM on command issue and commands were passed to DMA engine
without DMA-mapping all the segments.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:31 +02:00
Tejun Heo eb6a61bb95 ide-atapi,tape,floppy: allow ->pc_callback() to change rq->data_len
Impact: allow residual count implementation in ->pc_callback()

rq->data_len has two duties - carrying the number of input bytes on
issue and carrying residual count back to the issuer on completion.
ide-atapi completion callback ->pc_callback() is the right place to do
this but currently ide-atapi depends on rq->data_len carrying the
original request size after calling ->pc_callback() to complete the pc
request.

This patch makes ide_pc_intr(), ide_tape_issue_pc() and
ide_floppy_issue_pc() cache length to complete before calling
->pc_callback() so that it can modify rq->data_len as necessary.

Note: As using rq->data_len for two purposes can make cases like this
      incorrect in subtle ways, future changes will introduce separate
      field for residual count.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
2009-04-28 07:37:31 +02:00
Tejun Heo 08f370f0a2 ide-tape,floppy: fix failed command completion after request sense
Impact: fix infinite retry loop

After a command failed, ide-tape and floppy inserts REQUEST_SENSE in
front of the failed command and according to the result, sets
pc->retries, flags and errors.  After REQUEST_SENSE is complete, the
failed command is again at the front of the queue and if the verdict
was to terminate the request, the issue functions tries to complete it
directly by calling drive->pc_callback() and returning ide_stopped.

However, drive->pc_callback() doesn't complete a request.  It only
prepares for completion of the request.  As a result, this creates an
infinite loop where the failed request is retried perpetually.

Fix it by actually ending the request by calling ide_complete_rq().

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:31 +02:00
Tejun Heo 765139ef5f ide-pm: don't abuse rq->data
Impact: cleanup rq->data usage

ide-pm uses rq->data to carry pointer to struct request_pm_state
through request queue and rq->special is used to carray pointer to
local struct ide_cmd, which isn't necessary.  Use rq->special for
request_pm_state instead and use local ide_cmd in
ide_start_power_step().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
2009-04-28 07:37:30 +02:00
Tejun Heo 02e7cf8f84 ide-cd,atapi: use bio for internal commands
Impact: unify request data buffer handling

rq->data is used mostly to pass kernel buffer through request queue
without using bio.  There are only a couple of places which still do
this in kernel and converting to bio isn't difficult.

This patch converts ide-cd and atapi to use bio instead of rq->data
for request sense and internal pc commands.  With previous change to
unify sense request handling, this is relatively easily achieved by
adding blk_rq_map_kern() during sense_rq prep and PC issue.

If blk_rq_map_kern() fails for sense, the error is deferred till sense
issue and aborts the failed command which triggered the sense.  Note
that this is a slim possibility as sense prep is done on each command
issue, so for the above condition to actually trigger, all preps since
the last sense issue till the issue of the request which would require
a sense should fail.

* do_request functions might sleep now.  This should be okay as ide
  request_fn - do_ide_request() - is invoked only from make_request
  and plug work.  Make sure this is the case by adding might_sleep()
  to do_ide_request().

* Functions which access the read sense data before the sense request
  is complete now should access bio_data(sense_rq->bio) as the sense
  buffer might have been copied during blk_rq_map_kern().

* ide-tape updated to map sg.

* cdrom_do_block_pc() now doesn't have to deal with REQ_TYPE_ATA_PC
  special case.  Simplified.

* tp_ops->output/input_data path dropped from ide_pc_intr().

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:30 +02:00
Borislav Petkov 068753203e ide-atapi: convert ide-{floppy,tape} to using preallocated sense buffer
Since we're issuing REQ_TYPE_SENSE now we need to allow those types of
rqs in the ->do_request callbacks. As a future improvement, sense_len
assignment might be unified across all ATAPI devices. Borislav to
check with specs and test.

As a result, get rid of ide_queue_pc_head() and
drive->request_sense_rq.

tj: * Init request sense ide_atapi_pc from sense request.  In the
      longer timer, it would probably better to fold
      ide_create_request_sense_cmd() into its only current user -
      ide_floppy_get_format_progress().

    * ide_retry_pc() no longer takes @disk.

CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:30 +02:00
Borislav Petkov c457ce874a ide-cd: convert to using generic sense request
Preallocate a sense request in the ->do_request method and reinitialize
it only on demand, in case it's been consumed in the IRQ handler path.
The reason for this is that we don't want to be mapping rq to bio in
the IRQ path and introduce all kinds of unnecessary hacks to the block
layer.

tj: * Both user and kernel PC requests expect sense data to be stored
      in separate storage other than drive->sense_data.  Copy sense
      data to rq->sense on completion if rq->sense is not NULL.  This
      fixes bogus sense data on PC requests.

As a result, remove cdrom_queue_request_sense.

CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:30 +02:00
Borislav Petkov e69d800f7e ide: add helpers for preparing sense requests
This is in preparation of removing the queueing of a sense request out
of the IRQ handler path.

Use struct request_sense as a general sense buffer for all ATAPI
devices ide-{floppy,tape,cd}.

tj: * blk_get_request(__GFP_WAIT) can't be called from do_request() as
      it can cause deadlock.  Converted to use inline struct request
      and blk_rq_init().

    * Added xfer / cdb len selection depending on device type.

    * All sense prep logics folded into ide_prep_sense() which never
      fails.

    * hwif->rq clearing and sense_rq used handling moved into
      ide_queue_sense_rq().

    * blk_rq_map_kern() conversion is moved to later patch.

CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:30 +02:00
Tejun Heo 1f181d2b15 ide-cd: don't abuse rq->buffer
Impact: rq->buffer usage cleanup

ide-cd uses rq->buffer to carry pointer to the original request when
issuing REQUEST_SENSE.  Use rq->special instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
2009-04-28 07:37:29 +02:00
Tejun Heo ac0b0113dd ide-atapi: don't abuse rq->buffer
Impact: rq->buffer usage cleanup

ide-atapi uses rq->buffer as private opaque value for internal special
requests.  rq->special isn't used for these cases (the only case where
rq->special is used is for ide-tape rw requests).  Use rq->special
instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
2009-04-28 07:37:29 +02:00
Tejun Heo d868ca2430 ide-taskfile: don't abuse rq->buffer
Impact: rq->buffer usage cleanup

ide_raw_taskfile() directly uses rq->buffer to carry pointer to the
data buffer.  This complicates both block interface and ide backend
request handling.  Use blk_rq_map_kern() instead and drop special
handling for REQ_TYPE_ATA_TASKFILE from ide_map_sg().

Note that REQ_RW setting is moved upwards as blk_rq_map_kern() uses it
to initialize bio rw flag.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
2009-04-28 07:37:29 +02:00
Tejun Heo 8968932e54 ide-floppy: block pc always uses bio
Impact: remove unnecessary code path

Block pc requests always use bio and rq->data is always NULL.  No need
to worry about !rq->bio cases in idefloppy_block_pc_cmd().  Note that
ide-atapi uses ide_pio_bytes() for bio PIO transfer which handle sg
fine.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
2009-04-28 07:37:29 +02:00
Tejun Heo 59a4f6f355 ide-cd: clear sense buffer before issuing request sense
Impact: code simplification

ide_cd_request_sense_fixup() clears the tail of the sense buffer if
the device didn't completely fill it.  This patch makes
cdrom_queue_request_sense() clear the sense buffer before issuing the
command instead of clearing it afterwards.  This simplifies code and
eases future changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:29 +02:00
Tejun Heo b2963ac173 ide: don't set REQ_SOFTBARRIER
ide doesn't have to worry about REQ_SOFTBARRIER.  Don't set it.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:28 +02:00
Tejun Heo 220d06b553 ide: use blk_run_queue() instead of blk_start_queueing()
blk_start_queueing() is being phased out in favor of
[__]blk_run_queue().  Switch.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:28 +02:00
Tejun Heo 0de57fb93b ide-tape: remove back-to-back REQUEST_SENSE detection
Impact: fix an oops which always triggers

ide_tape_issue_pc() assumed drive->pc isn't NULL on invocation when
checking for back-to-back request sense issues but drive->pc can be
NULL and even when it's not NULL, it's not safe to dereference it once
the previous command is complete because pc could have been freed or
was on stack.  Kill back-to-back REQUEST_SENSE detection.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:28 +02:00
Bartlomiej Zolnierkiewicz b656eba122 Merge branch 'for-linus' into for-next 2009-04-23 22:56:58 +02:00
Bartlomiej Zolnierkiewicz d7f5143522 palm_bk3710: palm_bk3710_udmatimings[] CodingStyle fixup
Remove superfluous commas and add missing whitespaces.

Noticed-by: Joe Perches <joe@perches.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-23 22:53:45 +02:00
David Brownell 33e86019f7 palm_bk3710: those registers/bitfields don't exist
Bugfixes noted by checking the code against the controller
documentation (TI document number SPRUE21):

 - Remove declarations for eight non-existent registers (!);
   and remove accesses to two of them.

 - Remove access to various non-existent bitfields in some of
   the registers which *do* exist (those fields must-be-zero).

 - Provide comment to replace bogus reset logic (removed above,
   it relied on non-existent bitfields).  Resets require GPIO
   help; this driver doesn't currently know about that.

With some minor cleanup:  relocate a comment, avoid an extra
lookup of the PIO timings.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-23 22:53:43 +02:00
Bartlomiej Zolnierkiewicz 24fc484ab2 Merge branch 'for-linus' into for-next 2009-04-22 20:38:45 +02:00
Bruno Prémont b0aedb04ea ide: Stop disks on reboot for laptop which cuts power
My laptop (Acer Travelmate 660) always cuts the power when rebooting
which causes the disk to emergency-park it's head.

Add a dmi check to stop disk as for shutdown on this laptop.

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-22 20:33:41 +02:00
Helge Deller a1f9a89c90 ide-cd: fix kernel crash on hppa regression
With 2.6.30-rc2 I face a kernel crash on the 32bit hppa architecture 
due to ide-cd when udev creates the device nodes at startup:

Kernel Fault: Code=26 regs=8ed34c40 (Addr=00000024)
IASQ: 00000000 00000000 IAOQ: 1034b5ac 1034b5b0
 IIR: 4ab30048    ISR: 00000000  IOR: 00000024
 CPU:        0   CR30: 8ed34000 CR31: ffff55ff
 ORIG_R28: 00000000
 IAOQ[0]: ide_complete_rq+0x2c/0x70
 IAOQ[1]: ide_complete_rq+0x30/0x70
 RP(r2): cdrom_newpc_intr+0x178/0x46c
Backtrace:
 [<1035c608>] cdrom_newpc_intr+0x178/0x46c
 [<1034c494>] ide_intr+0x1b0/0x214
 [<1016d284>] handle_IRQ_event+0x70/0x150
 [<1016d4b0>] __do_IRQ+0x14c/0x1cc
 [<102f7864>] superio_interrupt+0x88/0xbc
 [<1016d284>] handle_IRQ_event+0x70/0x150
 [<1016d4b0>] __do_IRQ+0x14c/0x1cc
 [<10112efc>] do_cpu_irq_mask+0x9c/0xd0
 [<10116068>] intr_return+0x0/0x4

This crash seems to happen due to an uninitialized variable "rc".
The compiler even warns about that:
  CC      drivers/ide/ide-cd.o                                                         
/mnt/sda4/home/cvs/parisc/git-kernel/linus-linux-2.6/drivers/ide/ide-cd.c: In function `cdrom_newpc_intr':
/mnt/sda4/home/cvs/parisc/git-kernel/linus-linux-2.6/drivers/ide/ide-cd.c:612: warning: `rc' might be used uninitialized in this function

After applying the trivial patch below, which just initializes 
the variable to zero, the kernel doesn't crash any longer:

Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...
hda: command error: status=0x51 { DriveReady SeekComplete Error }
hda: command error: error=0x54 <3>{ AbortedCommand LastFailedSense=0x05 }
ide: failed opcode was: unknown
done.

Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Cc: Linus <torvalds@linux-foundation.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-22 20:33:40 +02:00
David Brownell db2f38c22e palm_bk3710: UDMA performance fix
Fix UDMA throughput bug:  tCYC averages t2CYCTYP/2, but the code
previously assumed it was the same as t2CYCTYP.  (That is, it was
using just one clock edge, not both.)  Move the table's type
declaration so it's adjacent to the table, making it more clear
what those numbers mean.

On one system this change increased throughput by almost 4x: UDMA/66
sometimes topped 23 MB/sec (on a drive known to do much better).  On
another system it was around a 10% win (UDMA/66 up to 7+ MB/sec).

The difference might be caused by the ratio between memory and IDE
clocks.  In the system with large speedup, this was exactly 2 (as a
workaround for a rev 1.1 silicon bug).  The other system used a more
standard ratio of 1.63 (and rev 2.1 silicon) ... clock domain synch
might have some issues, they're not unheard-of.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-22 20:33:40 +02:00
Tejun Heo 2ecf0a57c6 ide-dma: don't reset request fields on dma_timeout_retry()
Impact: drop unnecessary code

Now that everything uses bio and block operations, there is no need to
reset request fields manually when retrying a request.  Every field is
guaranteed to be always valid.  Drop unnecessary request field
resetting from ide_dma_timeout_retry().

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-21 12:16:56 +09:00
Tejun Heo 2c316bb57a ide: drop rq->data handling from ide_map_sg()
Impact: remove code path which is no longer necessary

All IDE data transfers now use rq->bio.  Simplify ide_map_sg()
accordingly.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
2009-04-19 08:46:03 +09:00
Tejun Heo 6d7003877c ide-atapi: kill unused fields and callbacks
Impact: remove fields and code paths which are no longer necessary

Now that ide-tape uses standard mechanisms to transfer data, special
case handling for bh handling can be dropped from ide-atapi.  Drop the
followings.

* pc->cur_pos, b_count, bh and b_data
* drive->pc_update_buffers() and pc_io_buffers().

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19 08:46:03 +09:00
Tejun Heo 07bd9686c5 ide-tape: simplify read/write functions
Impact: cleanup

idetape_chrdev_read/write() functions are unnecessarily complex when
everything can be handled in a single loop.  Collapse
idetape_add_chrdev_read/write_request() into the rw functions and
simplify the implementation.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19 08:46:03 +09:00
Tejun Heo 6bb11dd14f ide-tape: use byte size instead of sectors on rw issue functions
Impact: cleanup

Byte size is what most issue functions deal with, make
idetape_queue_rw_tail() and its wrappers take byte size instead of
sector counts.  idetape_chrdev_read() and write() functions are
converted to use tape->buffer_size instead of ctl from tape->cap.

This cleans up code a little bit and will ease the next r/w
reimplementation.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19 08:46:03 +09:00
Tejun Heo 88f1b941c5 ide-tape: unify r/w init paths
Impact: cleanup

Read and write init paths are almost identical.  Unify them into
idetape_init_rw().

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19 08:46:02 +09:00
Tejun Heo 963da55c4b ide-tape: kill idetape_bh
Impact: kill now unnecessary idetape_bh

With everything using standard mechanisms, there is no need for
idetape_bh anymore.  Kill it and use tape->buf, cur and valid to
describe data buffer instead.

Changes worth mentioning are...

* idetape_queue_rq_tail() now always queue tape->buf and and adjusts
  buffer state properly before completion.

* idetape_pad_zeros() clears the buffer only once.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19 08:46:02 +09:00
Tejun Heo 21d9c5d227 ide-tape: use standard data transfer mechanism
Impact: use standard way to transfer data

ide-tape uses rq in an interesting way.  For r/w requests, rq->special
is used to carry a private buffer management structure idetape_bh and
rq->nr_sectors and current_nr_sectors are initialized to the number of
idetape blocks which isn't necessary 512 bytes.  Also,
rq->current_nr_sectors is used to report back the residual count in
units of idetape blocks.

This peculiarity taxes both block layer and ide.  ide-atapi has
different paths and hooks to accomodate it and what a rq means becomes
quite confusing and making changes at the block layer becomes quite
difficult and error-prone.

This patch makes ide-tape use bio instead.  With the previous patch,
ide-tape currently is using single contiguos buffer so replacing it
isn't difficult.  Data buffer is mapped into bio using
blk_rq_map_kern() in idetape_queue_rw_tail().  idetape_io_buffers()
and idetape_update_buffers() are dropped and pc->bh is set to null to
tell ide-atapi to use standard data transfer mechanism and idetape_bh
byte counts are updated by the issuer on completion using the residual
count.

This change also nicely removes the FIXME in ide_pc_intr() where
ide-tape rqs need to be completed using ide_rq_bytes() instead of
blk_rq_bytes() (although this didn't really matter as the request
didn't have bio).

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
2009-04-19 08:46:02 +09:00
Tejun Heo 35ab8d3251 ide-tape: use single continuous buffer
Impact: simpler buffer allocation and handling, kills OOM, fix DMA transfers

ide-tape has its own multiple buffer mechanism using struct
idetape_bh.  It allocates buffer with decreasing order-of-two
allocations so that it results in minimum number of segments.
However, the implementation is quite complex and works in a way that
no other block or ide driver works necessitating a lot of special case
handling.

The benefit this complex allocation scheme brings is questionable as
PIO or DMA the number of segments (16 maximum) doesn't make any
noticeable difference and it also doesn't negate the need for multiple
order allocation which can fail under memory pressure or high
fragmentation although it does lower the highest order necessary by
one when the buffer size isn't power of two.

As the first step to remove the custom buffer management, this patch
makes ide-tape allocate single continous buffer.  The maximum order is
four.  I doubt the change would cause any trouble but if it ever
matters, it should be converted to regular sg mechanism like everyone
else and even in that case dropping custom buffer handling and moving
to standard mechanism first make sense as an intermediate step.

This patch makes the first bh to contain the whole buffer and drops
multi bh handling code.  Following patches will make further changes.

This patch has the side effect of killing OOM triggered by allocation
path and fixing DMA transfers.  Previously, bug in alloc path
triggered OOM on command issue and commands were passed to DMA engine
without DMA-mapping all the segments.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19 08:46:02 +09:00
Tejun Heo b3071d190d ide-atapi,tape,floppy: allow ->pc_callback() to change rq->data_len
Impact: allow residual count implementation in ->pc_callback()

rq->data_len has two duties - carrying the number of input bytes on
issue and carrying residual count back to the issuer on completion.
ide-atapi completion callback ->pc_callback() is the right place to do
this but currently ide-atapi depends on rq->data_len carrying the
original request size after calling ->pc_callback() to complete the pc
request.

This patch makes ide_pc_intr(), ide_tape_issue_pc() and
ide_floppy_issue_pc() cache length to complete before calling
->pc_callback() so that it can modify rq->data_len as necessary.

Note: As using rq->data_len for two purposes can make cases like this
      incorrect in subtle ways, future changes will introduce separate
      field for residual count.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
2009-04-19 08:46:02 +09:00
Tejun Heo ea7066afcd ide-tape,floppy: fix failed command completion after request sense
Impact: fix infinite retry loop

After a command failed, ide-tape and floppy inserts REQUEST_SENSE in
front of the failed command and according to the result, sets
pc->retries, flags and errors.  After REQUEST_SENSE is complete, the
failed command is again at the front of the queue and if the verdict
was to terminate the request, the issue functions tries to complete it
directly by calling drive->pc_callback() and returning ide_stopped.

However, drive->pc_callback() doesn't complete a request.  It only
prepares for completion of the request.  As a result, this creates an
infinite loop where the failed request is retried perpetually.

Fix it by actually ending the request by calling ide_complete_rq().

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19 08:46:02 +09:00
Tejun Heo fc38b521dc ide-pm: don't abuse rq->data
Impact: cleanup rq->data usage

ide-pm uses rq->data to carry pointer to struct request_pm_state
through request queue and rq->special is used to carray pointer to
local struct ide_cmd, which isn't necessary.  Use rq->special for
request_pm_state instead and use local ide_cmd in
ide_start_power_step().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
2009-04-19 07:00:43 +09:00
Tejun Heo 5c4be57249 ide-cd,atapi: use bio for internal commands
Impact: unify request data buffer handling

rq->data is used mostly to pass kernel buffer through request queue
without using bio.  There are only a couple of places which still do
this in kernel and converting to bio isn't difficult.

This patch converts ide-cd and atapi to use bio instead of rq->data
for request sense and internal pc commands.  With previous change to
unify sense request handling, this is relatively easily achieved by
adding blk_rq_map_kern() during sense_rq prep and PC issue.

If blk_rq_map_kern() fails for sense, the error is deferred till sense
issue and aborts the failed command which triggered the sense.  Note
that this is a slim possibility as sense prep is done on each command
issue, so for the above condition to actually trigger, all preps since
the last sense issue till the issue of the request which would require
a sense should fail.

* do_request functions might sleep now.  This should be okay as ide
  request_fn - do_ide_request() - is invoked only from make_request
  and plug work.  Make sure this is the case by adding might_sleep()
  to do_ide_request().

* Functions which access the read sense data before the sense request
  is complete now should access bio_data(sense_rq->bio) as the sense
  buffer might have been copied during blk_rq_map_kern().

* ide-tape updated to map sg.

* cdrom_do_block_pc() now doesn't have to deal with REQ_TYPE_ATA_PC
  special case.  Simplified.

* tp_ops->output/input_data path dropped from ide_pc_intr().

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19 07:00:42 +09:00
Borislav Petkov 6b544fcc8c ide-atapi: convert ide-{floppy,tape} to using preallocated sense buffer
Since we're issuing REQ_TYPE_SENSE now we need to allow those types of
rqs in the ->do_request callbacks. As a future improvement, sense_len
assignment might be unified across all ATAPI devices. Borislav to
check with specs and test.

As a result, get rid of ide_queue_pc_head() and
drive->request_sense_rq.

tj: * Init request sense ide_atapi_pc from sense request.  In the
      longer timer, it would probably better to fold
      ide_create_request_sense_cmd() into its only current user -
      ide_floppy_get_format_progress().

    * ide_retry_pc() no longer takes @disk.

CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19 07:00:42 +09:00
Borislav Petkov 746d5e4327 ide-cd: convert to using generic sense request
Preallocate a sense request in the ->do_request method and reinitialize
it only on demand, in case it's been consumed in the IRQ handler path.
The reason for this is that we don't want to be mapping rq to bio in
the IRQ path and introduce all kinds of unnecessary hacks to the block
layer.

tj: * Both user and kernel PC requests expect sense data to be stored
      in separate storage other than drive->sense_data.  Copy sense
      data to rq->sense on completion if rq->sense is not NULL.  This
      fixes bogus sense data on PC requests.

As a result, remove cdrom_queue_request_sense.

CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19 07:00:42 +09:00
Borislav Petkov a1df5169f9 ide: add helpers for preparing sense requests
This is in preparation of removing the queueing of a sense request out
of the IRQ handler path.

Use struct request_sense as a general sense buffer for all ATAPI
devices ide-{floppy,tape,cd}.

tj: * blk_get_request(__GFP_WAIT) can't be called from do_request() as
      it can cause deadlock.  Converted to use inline struct request
      and blk_rq_init().

    * Added xfer / cdb len selection depending on device type.

    * All sense prep logics folded into ide_prep_sense() which never
      fails.

    * hwif->rq clearing and sense_rq used handling moved into
      ide_queue_sense_rq().

    * blk_rq_map_kern() conversion is moved to later patch.

CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19 07:00:42 +09:00
Tejun Heo cbfd082abf ide-cd: don't abuse rq->buffer
Impact: rq->buffer usage cleanup

ide-cd uses rq->buffer to carry pointer to the original request when
issuing REQUEST_SENSE.  Use rq->special instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
2009-04-19 07:00:42 +09:00
Tejun Heo c267cc1c4d ide-atapi: don't abuse rq->buffer
Impact: rq->buffer usage cleanup

ide-atapi uses rq->buffer as private opaque value for internal special
requests.  rq->special isn't used for these cases (the only case where
rq->special is used is for ide-tape rw requests).  Use rq->special
instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
2009-04-19 07:00:42 +09:00
Tejun Heo eace4cb04c ide-taskfile: don't abuse rq->buffer
Impact: rq->buffer usage cleanup

ide_raw_taskfile() directly uses rq->buffer to carry pointer to the
data buffer.  This complicates both block interface and ide backend
request handling.  Use blk_rq_map_kern() instead and drop special
handling for REQ_TYPE_ATA_TASKFILE from ide_map_sg().

Note that REQ_RW setting is moved upwards as blk_rq_map_kern() uses it
to initialize bio rw flag.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
2009-04-19 07:00:42 +09:00
Tejun Heo 7f006dc24f ide-floppy: block pc always uses bio
Impact: remove unnecessary code path

Block pc requests always use bio and rq->data is always NULL.  No need
to worry about !rq->bio cases in idefloppy_block_pc_cmd().  Note that
ide-atapi uses ide_pio_bytes() for bio PIO transfer which handle sg
fine.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
2009-04-19 07:00:42 +09:00
Tejun Heo 1873b90cde ide-cd: clear sense buffer before issuing request sense
Impact: code simplification

ide_cd_request_sense_fixup() clears the tail of the sense buffer if
the device didn't completely fill it.  This patch makes
cdrom_queue_request_sense() clear the sense buffer before issuing the
command instead of clearing it afterwards.  This simplifies code and
eases future changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19 07:00:41 +09:00
Tejun Heo 55f3f39942 ide: don't set REQ_SOFTBARRIER
ide doesn't have to worry about REQ_SOFTBARRIER.  Don't set it.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19 07:00:41 +09:00
Tejun Heo 853280a4dc ide: use blk_run_queue() instead of blk_start_queueing()
blk_start_queueing() is being phased out in favor of
[__]blk_run_queue().  Switch.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19 07:00:41 +09:00
Tejun Heo 1e75540ec5 ide-tape: remove back-to-back REQUEST_SENSE detection
Impact: fix an oops which always triggers

ide_tape_issue_pc() assumed drive->pc isn't NULL on invocation when
checking for back-to-back request sense issues but drive->pc can be
NULL and even when it's not NULL, it's not safe to dereference it once
the previous command is complete because pc could have been freed or
was on stack.  Kill back-to-back REQUEST_SENSE detection.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19 07:00:41 +09:00
Sergei Shtylyov 15da90b516 cs5536: define dma_sff_read_status() method
The driver somehow got merged with the initializer for the dma_sff_read_status()
method missing which caused kernel panic on bootup.

This should fix the kernel.org bug #13026...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Reported-by: Arnd Hannemann <hannemann@nets.rwth-aachen.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-18 17:42:20 +02:00
Bartlomiej Zolnierkiewicz f505d49ffd ide: fix barriers support
Freeing non-slab objects is bad and results in an oops.  Fix it.

Reported-and-tested-by: Andrew Price <andy@andrewprice.me.uk>
Cc: Theodore Tso <tytso@mit.edu>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-18 17:42:20 +02:00
Jack Stone d5f840bf74 ide: Remove void casts
Remove uneeded void casts

Signed-off-by: Jack Stone <jwjstone@fastmail.fm>
Cc: jeff@garzik.org
Cc: kernel-janitors@vger.kernel.org
Cc: Jack Stone <jwjstone@fastmail.fm>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-18 17:42:19 +02:00
Sergei Shtylyov 59c8d04f5e hpt366: use ATA_DMA_* constants
Use ATA_DMA_* constants instead of the bare numbers for the BMIDE register bits.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-18 17:42:19 +02:00
Sergei Shtylyov c018f1ee5c hpt366: fix HPT370 DMA timeouts
The big driver change in 2.4.19-rc1 introduced a regression for many HPT370[A]
chips -- DMA stopped to work completely, only causing endless timeouts...

The culprit has been identified (at last!): it turned to be the code resetting
the DMA state machine before each transfer. Stop doing it now as this counter-
measure has clearly caused more harm than good.

This should fix the kernel.org bug #7703.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-18 17:42:19 +02:00
Stanislaw Gruszka fb4252e594 at91_ide: turn on PIO 6 support
As we have already PIO 6 transfer mode supported in IDE layer, we can turn
it on in the driver.

Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Tested-by: "Steve Wootton" <swootton@esi-estech.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:13:04 +02:00
Stanislaw Gruszka 55c590b64e at91_ide: remove unused ide_mm_{outb,inb}
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
2009-04-08 14:13:04 +02:00
Borislav Petkov 3c8a48e9a9 ide-cd: reverse NOT_READY sense key logic
Make the case of flushing the drive's cache explicit.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:13:03 +02:00
Sergei Shtylyov 3153c26b54 ide: refactor tf_read() method
Simplify tf_read() method, making it deal only with 'struct ide_taskfile' and
the validity flags that the upper layer passes, and factoring out the code that
deals with the high order bytes into ide_tf_readback() to be called from the
only two functions interested, ide_complete_cmd() and ide_dump_sector().

This should stop the needless code duplication in this method and so make
it about twice smaller than it was; along with simplifying the setup for
the method call, this should save both time and space...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:13:03 +02:00
Sergei Shtylyov c9ff9e7b64 ide: refactor tf_load() method
Simplify tf_load() method, making it deal only with 'struct ide_taskfile' and
the validity flags that the upper layer passes, and moving the code that deals
with the high order bytes into the only function interested, do_rw_taskfile().

This should stop the needless code duplication in this method and so make
it about twice smaller than it was; along with simplifying the setup for the
method call, this should save both time and space...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:13:03 +02:00
Sergei Shtylyov 30881b9ac9 ide: call write_devctl() method from tf_read() method
Use write_devctl() method to clear/set the HOB bit in tf_read() method.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:13:02 +02:00
Sergei Shtylyov 4109d19af7 ide: move common code out of tf_load() method
Move device register masking (and setting drive->select) out of tf_load() method
and into the only function that needs to use this code, do_rw_taskfile()...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
[bart: fix whitespace error]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:13:02 +02:00
Sergei Shtylyov 745483f10c ide: simplify 'struct ide_taskfile'
Make 'struct ide_taskfile' cover only 8 register values and thus put two such
fields ('tf' and 'hob') into 'struct ide_cmd', dropping unnecessary 'tf_array'
field from it.

This required changing the prototype of ide_get_lba_addr() and ide_tf_dump().

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
[bart: fix setting of ATA_LBA bit for LBA48 commands in __ide_do_rw_disk()]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:13:02 +02:00
Sergei Shtylyov 60f85019c6 ide: replace IDE_TFLAG_* flags by IDE_VALID_*
Replace IDE_TFLAG_{IN|OUT}_* flags meaning to the taskfile register validity on
input/output by the IDE_VALID_* flags and introduce 4 symmetric 8-bit register
validity indicator subfields, 'valid.{input/output}.{tf|hob}', into the 'struct
ide_cmd' instead of using the 'tf_flags' field for that purpose (this field can
then be turned from 32-bit into 8-bit one).

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:13:01 +02:00
Bartlomiej Zolnierkiewicz 674f0ea111 ide-cd: fix intendation in cdrom_decode_status()
Based on earlier work by Borislav Petkov.

Fix intendation in cdrom_decode_status(), no real code changes.

While at it:
- beautify comments

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:12:54 +02:00
Bartlomiej Zolnierkiewicz 1920c48d79 ide-cd: unify handling of fs and pc requests in cdrom_decode_status()
Based on earlier work by Borislav Petkov.

Unify handling of fs and pc requests in cdrom_decode_status().

While at it:
- remove unreachable code

The only change in functionality is that for pc requests more
detailed error message will be printed for following sense keys:
* ILLEGAL_REQUEST
* DATA_PROTECT
* MEDIUM_ERROR
* BLANK_CHECK

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:12:54 +02:00
Bartlomiej Zolnierkiewicz e01f251fd0 ide-cd: convert cdrom_decode_status() to use switch statements
Based on earlier work by Borislav Petkov.

Convert cdrom_decode_status() to use switch statements in
preparation to unify handling of fs and pc requests.

While at it:
- remove superfluous comments and do minor CodingStyle fixups

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:12:53 +02:00
Borislav Petkov 98036abf31 ide-cd: update debugging support
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
[bart: extracted from "ide-cd: cleanup cdrom_decode_status" patch]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:12:53 +02:00
Borislav Petkov dfa4411cc3 ide-cd: respect REQ_QUIET for fs requests in cdrom_decode_status()
There should be no functional change resulting from this patch.

Suggested-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:12:53 +02:00
Huang Weiyi 1597cd8250 ide: remove unused #include <linux/version.h>
Remove unused #include <linux/version.h> in drivers/ide/at91_ide.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:12:53 +02:00
Atsushi Nemoto aa24d9783d tx4939ide: Fix tx4939ide_{in,out}put_data_swap argument
The commit adb1af9 ("ide: pass command instead of request to
ide_pio_datablock()") missed tx4939ide driver.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:12:52 +02:00
Atsushi Nemoto d68bab503e tx493[89]ide: Remove big endian version of tx493[89]ide_tf_{load,read}
Now tx493[89]ide_tf_{load,read} do not contain word I/O operations.
They are endian-free now.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>,
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:12:52 +02:00
Borislav Petkov 805ec58ad7 ide-cd: carve out an ide_cd_breathe()-helper for fs write requests
There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:12:52 +02:00
Borislav Petkov 8e59bfde31 ide-cd: move status checking into the IRQ handler
There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:12:51 +02:00
Sergei Shtylyov cfd30daa0d ide-h8300: remove custom tf_{read|load}() methods
Since tf_{read|load}() methods of this driver have now become identical to their
standard counterparts using I/O port accesses, there's no need to override those
anymore...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:12:51 +02:00
Sergei Shtylyov 7636e455ea at91_ide: remove custom tf_{read|load}() methods
Since tf_{read|load}() methods of this driver have now become identical to their
standard counterparts using MMIO accesses, there's no need to override those
anymore...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:12:51 +02:00
Sergei Shtylyov add4d9a983 ide-h8300: remove mm_{inw|outw}()
Remove two no longer used functions that I've overlooked...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:12:50 +02:00
Atsushi Nemoto 253275c52c tx4939ide: remove wmb()
* define CHECK_DMA_MASK
* remove use of wmb()

Reported-by: Grant Grundler <grundler@google.com>
Reviewed-by: Grant Grundler <grundler@google.com>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
2009-04-08 14:12:49 +02:00
Grant Grundler edafcf73dc ide: remove wmb() from ide-dma-sff.c and scc_pata.c
This patch:
o replaces "mask" variable in ide_dma_end() with #define.
o removes use of wmb() in ide-dma-sff.c and scc_pata.c.
o is not tested - I don't have (or want) the HW.

Signed-off-by: Grant Grundler <grundler@google.com>
Cc: KOBAYASHI Yoshitake <yoshitake.kobayashi@toshiba.co.jp>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:12:49 +02:00
Geert Uytterhoeven d18812070e ide: falconide/q40ide - Use __ide_mm_{in,out}sw() for data
Both of commits f94116aeec ("ide: cleanup
<asm-m68k/ide.h>") and 15a453a955 ("ide: include
<asm/ide.h> only when needed") break falconide:

| Uniform Multi-Platform E-IDE driver
| ide: Falcon IDE controller
| Probing IDE interface ide0...
| hda: Sarge m68k, ATA DISK drive
| ide0 at 0xfff00000 on irq 15 (serialized)
| ide-gd driver 1.18
| hda: max request size: 128KiB
| hda: 2118816 sectors (1084 MB) w/256KiB Cache, CHS=2102/16/63
|  hda:<4>hda: lost interrupt

This happens because falconide relies on {in,out}sw() being redefined in
<asm/ide.h>, as included by <linux/ide.h>, which is no longer the case.
Use __ide_mm_{in,out}sw() from <asm/ide.h> instead, just like
ide_{in,out}put_data() do.

The same problem seems to exist in q40ide.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:12:48 +02:00
Geert Uytterhoeven aa07573b2b ide: Fix host drivers that need IRQF_SHARED
commit 255115fb35 ("ide: allow host drivers to
specify IRQ flags") added irq_flags fields to struct ide_port_info and struct
ide_host.  Drivers can now set ide_port_info.irq_flags = IRQF_SHARED, while
init_irq() passes ide_host.irq_flags to request_irq().

Unfortunately ide_host.irq_flags is never set, causing (on ARAnyM):

| Uniform Multi-Platform E-IDE driver
| ide: Falcon IDE controller
| Probing IDE interface ide0...
| hda: Sarge m68k, ATA DISK drive
| init_irq: sa = 0
| ide0: disabled, unable to get IRQ 15
| ide0: failed to initialize IDE interface
| ide0: disabling port

Solve this by copying ide_port_info.irq_flags to ide_host.irq_flags in
ide_host_alloc().

This bug probably affects the following IDE host drivers:
  - buddha
  - delkin_cb
  - falconide
  - gayle
  - ide-cs
  - macide
  - q40ide
  - scc_pata
  - sgiioc4

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:12:47 +02:00
Yang Hongyang 284901a90a dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:11 -07:00
Borislav Petkov 5b6c942dd1 ide-floppy: do not complete rq's prematurely
... and access them afterwards. Simplify rq completing code while at it.

Spotted-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:34 +02:00
Gilles Espinasse d80c592c38 ide: be able to build pmac driver without IDE built-in
No reason to need IDE built-in to be able to compile pmac driver.

Tested to work on 2.6.29-rc8 and 2.6.28.8 with ide and pmac as modules
inside an initramfs.

Signed-off-by: Gilles Espinasse <g.esp@free.fr>
Cc: sam@ravnborg.org
Cc: benh@kernel.crashing.org
[bart: remove now superfluous IDE check]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:34 +02:00
TOMARI Hisanobu a9d5a97fa3 ide-pmac: IDE cable detection on Apple PowerBook
As IDE cable used on Apple PowerBook/iBook laptops are always of "Short 40"
type when the firmware says it's 80 conductor one, the cable detection should
return ATA_CBL_PATA40_SHORT on those machines.  This enables to automatically
use UDMA5 even with drives that doesn't correctly detect those cables on Apple
laptops.

Signed-off-by: TOMARI Hisanobu <posco.grubb@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: benh@kernel.crashing.org
[bart: beautify patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:34 +02:00
Sergei Shtylyov fdd88f0af6 ide: inline SELECT_DRIVE()
Since SELECT_DRIVE() has boiled down to a mere dev_select() method call, it now
makes sense to just inline it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:33 +02:00