Problem:
On reconfigure of device, there is no way to defend if the backend
storage is matching with the initial backend storage.
Say, if an initial connect request for backend "pool1/image1" got
mapped to /dev/nbd0 and the userspace process is terminated. A next
reconfigure request within NBD_ATTR_DEAD_CONN_TIMEOUT is allowed to
use /dev/nbd0 for a different backend "pool1/image2"
For example, an operation like below could be dangerous:
$ sudo rbd-nbd map --try-netlink rbd-pool/ext4-image
/dev/nbd0
$ sudo blkid /dev/nbd0
/dev/nbd0: UUID="bfc444b4-64b1-418f-8b36-6e0d170cfc04" TYPE="ext4"
$ sudo pkill -9 rbd-nbd
$ sudo rbd-nbd attach --try-netlink --device /dev/nbd0 rbd-pool/xfs-image
/dev/nbd0
$ sudo blkid /dev/nbd0
/dev/nbd0: UUID="d29bf343-6570-4069-a9ea-2fa156ced908" TYPE="xfs"
Solution:
Provide a way for userspace processes to keep some metadata to identify
between the device and the backend, so that when a reconfigure request is
made, we can compare and avoid such dangerous operations.
With this solution, as part of the initial connect request, backend
path can be stored in the sysfs per device config, so that on a reconfigure
request it's easy to check if the backend path matches with the initial
connect backend path.
Please note, ioctl interface to nbd will not have these changes, as there
won't be any reconfigure.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210429102828.31248-1-prasanna.kalever@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and
request_queue allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210602065345.355274-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the following two statements by the statement “goto put_nbd;”
nbd_put(nbd);
return 0;
Signed-off-by: Sun Ke <sunke32@huawei.com>
Suggested-by: Markus Elfring <Markus.Elfring@web.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210512114331.1233964-3-sunke32@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There exists a race where we can be attempting to create a new nbd
configuration while a previous configuration is going down, both
configured with DESTROY_ON_DISCONNECT. Normally devices all have a
reference of 1, as they won't be cleaned up until the module is torn
down. However with DESTROY_ON_DISCONNECT we'll make sure that there is
only 1 reference (generally) on the device for the config itself, and
then once the config is dropped, the device is torn down.
The race that exists looks like this
TASK1 TASK2
nbd_genl_connect()
idr_find()
refcount_inc_not_zero(nbd)
* count is 2 here ^^
nbd_config_put()
nbd_put(nbd) (count is 1)
setup new config
check DESTROY_ON_DISCONNECT
put_dev = true
if (put_dev) nbd_put(nbd)
* free'd here ^^
In nbd_genl_connect() we assume that the nbd ref count will be 2,
however clearly that won't be true if the nbd device had been setup as
DESTROY_ON_DISCONNECT with its prior configuration. Fix this by getting
rid of the runtime flag to check if we need to mess with the nbd device
refcount, and use the device NBD_DESTROY_ON_DISCONNECT flag to check if
we need to adjust the ref counts. This was reported by syzkaller with
the following kasan dump
BUG: KASAN: use-after-free in instrument_atomic_read include/linux/instrumented.h:71 [inline]
BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:27 [inline]
BUG: KASAN: use-after-free in refcount_dec_not_one+0x71/0x1e0 lib/refcount.c:76
Read of size 4 at addr ffff888143bf71a0 by task systemd-udevd/8451
CPU: 0 PID: 8451 Comm: systemd-udevd Not tainted 5.11.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:120
print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:230
__kasan_report mm/kasan/report.c:396 [inline]
kasan_report.cold+0x79/0xd5 mm/kasan/report.c:413
check_memory_region_inline mm/kasan/generic.c:179 [inline]
check_memory_region+0x13d/0x180 mm/kasan/generic.c:185
instrument_atomic_read include/linux/instrumented.h:71 [inline]
atomic_read include/asm-generic/atomic-instrumented.h:27 [inline]
refcount_dec_not_one+0x71/0x1e0 lib/refcount.c:76
refcount_dec_and_mutex_lock+0x19/0x140 lib/refcount.c:115
nbd_put drivers/block/nbd.c:248 [inline]
nbd_release+0x116/0x190 drivers/block/nbd.c:1508
__blkdev_put+0x548/0x800 fs/block_dev.c:1579
blkdev_put+0x92/0x570 fs/block_dev.c:1632
blkdev_close+0x8c/0xb0 fs/block_dev.c:1640
__fput+0x283/0x920 fs/file_table.c:280
task_work_run+0xdd/0x190 kernel/task_work.c:140
tracehook_notify_resume include/linux/tracehook.h:189 [inline]
exit_to_user_mode_loop kernel/entry/common.c:174 [inline]
exit_to_user_mode_prepare+0x249/0x250 kernel/entry/common.c:201
__syscall_exit_to_user_mode_work kernel/entry/common.c:283 [inline]
syscall_exit_to_user_mode+0x19/0x50 kernel/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fc1e92b5270
Code: 73 01 c3 48 8b 0d 38 7d 20 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 59 c1 20 00 00 75 10 b8 03 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ee fb ff ff 48 89 04 24
RSP: 002b:00007ffe8beb2d18 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000007 RCX: 00007fc1e92b5270
RDX: 000000000aba9500 RSI: 0000000000000000 RDI: 0000000000000007
RBP: 00007fc1ea16f710 R08: 000000000000004a R09: 0000000000000008
R10: 0000562f8cb0b2a8 R11: 0000000000000246 R12: 0000000000000000
R13: 0000562f8cb0afd0 R14: 0000000000000003 R15: 000000000000000e
Allocated by task 1:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:38
kasan_set_track mm/kasan/common.c:46 [inline]
set_alloc_info mm/kasan/common.c:401 [inline]
____kasan_kmalloc.constprop.0+0x82/0xa0 mm/kasan/common.c:429
kmalloc include/linux/slab.h:552 [inline]
kzalloc include/linux/slab.h:682 [inline]
nbd_dev_add+0x44/0x8e0 drivers/block/nbd.c:1673
nbd_init+0x250/0x271 drivers/block/nbd.c:2394
do_one_initcall+0x103/0x650 init/main.c:1223
do_initcall_level init/main.c:1296 [inline]
do_initcalls init/main.c:1312 [inline]
do_basic_setup init/main.c:1332 [inline]
kernel_init_freeable+0x605/0x689 init/main.c:1533
kernel_init+0xd/0x1b8 init/main.c:1421
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:296
Freed by task 8451:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:38
kasan_set_track+0x1c/0x30 mm/kasan/common.c:46
kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:356
____kasan_slab_free+0xe1/0x110 mm/kasan/common.c:362
kasan_slab_free include/linux/kasan.h:192 [inline]
slab_free_hook mm/slub.c:1547 [inline]
slab_free_freelist_hook+0x5d/0x150 mm/slub.c:1580
slab_free mm/slub.c:3143 [inline]
kfree+0xdb/0x3b0 mm/slub.c:4139
nbd_dev_remove drivers/block/nbd.c:243 [inline]
nbd_put.part.0+0x180/0x1d0 drivers/block/nbd.c:251
nbd_put drivers/block/nbd.c:295 [inline]
nbd_config_put+0x6dd/0x8c0 drivers/block/nbd.c:1242
nbd_release+0x103/0x190 drivers/block/nbd.c:1507
__blkdev_put+0x548/0x800 fs/block_dev.c:1579
blkdev_put+0x92/0x570 fs/block_dev.c:1632
blkdev_close+0x8c/0xb0 fs/block_dev.c:1640
__fput+0x283/0x920 fs/file_table.c:280
task_work_run+0xdd/0x190 kernel/task_work.c:140
tracehook_notify_resume include/linux/tracehook.h:189 [inline]
exit_to_user_mode_loop kernel/entry/common.c:174 [inline]
exit_to_user_mode_prepare+0x249/0x250 kernel/entry/common.c:201
__syscall_exit_to_user_mode_work kernel/entry/common.c:283 [inline]
syscall_exit_to_user_mode+0x19/0x50 kernel/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at ffff888143bf7000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 416 bytes inside of
1024-byte region [ffff888143bf7000, ffff888143bf7400)
The buggy address belongs to the page:
page:000000005238f4ce refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x143bf0
head:000000005238f4ce order:3 compound_mapcount:0 compound_pincount:0
flags: 0x57ff00000010200(slab|head)
raw: 057ff00000010200 ffffea00004b1400 0000000300000003 ffff888010c41140
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888143bf7080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888143bf7100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888143bf7180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888143bf7200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Reported-and-tested-by: syzbot+429d3f82d757c211bff3@syzkaller.appspotmail.com
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=vx6U
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/drivers-2021-02-17' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- Remove the skd driver. It's been EOL for a long time (Damien)
- NVMe pull requests
- fix multipath handling of ->queue_rq errors (Chao Leng)
- nvmet cleanups (Chaitanya Kulkarni)
- add a quirk for buggy Amazon controller (Filippo Sironi)
- avoid devm allocations in nvme-hwmon that don't interact well
with fabrics (Hannes Reinecke)
- sysfs cleanups (Jiapeng Chong)
- fix nr_zones for multipath (Keith Busch)
- nvme-tcp crash fix for no-data commands (Sagi Grimberg)
- nvmet-tcp fixes (Sagi Grimberg)
- add a missing __rcu annotation (Christoph)
- failed reconnect fixes (Chao Leng)
- various tracing improvements (Michal Krakowiak, Johannes
Thumshirn)
- switch the nvmet-fc assoc_list to use RCU protection (Leonid
Ravich)
- resync the status codes with the latest spec (Max Gurtovoy)
- minor nvme-tcp improvements (Sagi Grimberg)
- various cleanups (Rikard Falkeborn, Minwoo Im, Chaitanya
Kulkarni, Israel Rukshin)
- Floppy O_NDELAY fix (Denis)
- MD pull request
- raid5 chunk_sectors fix (Guoqing)
- Use lore links (Kees)
- Use DEFINE_SHOW_ATTRIBUTE for nbd (Liao)
- loop lock scaling (Pavel)
- mtip32xx PCI fixes (Bjorn)
- bcache fixes (Kai, Dongdong)
- Misc fixes (Tian, Yang, Guoqing, Joe, Andy)
* tag 'for-5.12/drivers-2021-02-17' of git://git.kernel.dk/linux-block: (64 commits)
lightnvm: pblk: Replace guid_copy() with export_guid()/import_guid()
lightnvm: fix unnecessary NULL check warnings
nvme-tcp: fix crash triggered with a dataless request submission
block: Replace lkml.org links with lore
nbd: Convert to DEFINE_SHOW_ATTRIBUTE
nvme: add 48-bit DMA address quirk for Amazon NVMe controllers
nvme-hwmon: rework to avoid devm allocation
nvmet: remove else at the end of the function
nvmet: add nvmet_req_subsys() helper
nvmet: use min of device_path and disk len
nvmet: use invalid cmd opcode helper
nvmet: use invalid cmd opcode helper
nvmet: add helper to report invalid opcode
nvmet: remove extra variable in id-ns handler
nvmet: make nvmet_find_namespace() req based
nvmet: return uniform error for invalid ns
nvmet: set status to 0 in case for invalid nsid
nvmet-fc: add a missing __rcu annotation to nvmet_fc_tgt_assoc.queues
nvme-multipath: set nr_zones for zoned namespaces
nvmet-tcp: fix potential race of tcp socket closing accept_work
...
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Liao Pingfang <winndows@163.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When setting up a device, we can krealloc the config->socks array to add
new sockets to the configuration. However if we happen to get a IO
request in at this point even though we aren't setup we could hit a UAF,
as we deref config->socks without any locking, assuming that the
configuration was setup already and that ->socks is safe to access it as
we have a reference on the configuration.
But there's nothing really preventing IO from occurring at this point of
the device setup, we don't want to incur the overhead of a lock to
access ->socks when it will never change while the device is running.
To fix this UAF scenario simply freeze the queue if we are adding
sockets. This will protect us from this particular case without adding
any additional overhead for the normal running case.
Cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The creation path of the NBD device respects max_part and only scans for
partitions if max_part is not 0. However, some other code paths ignore
max_part, and unconditionally scan for partitions. Add a check for
max_part on each partition scan.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can just dereference the point in struct gendisk instead. Also
remove the now unused export.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that the hd_struct always has a block device attached to it, there is
no need for having two size field that just get out of sync.
Additionally the field in hd_struct did not use proper serialization,
possibly allowing for torn writes. By only using the block_device field
this problem also gets fixed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use set_capacity_and_notify to update the disk and block device sizes and
send a RESIZE uevent to userspace. Note that blktests relies on uevents
being sent also for updates that did not change the device size, so the
explicit kobject_uevent remains for that case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the validation of the block from the callers into nbd_set_size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge nbd_size_set and nbd_size_update into a single function that also
updates the nbd_config fields. This new function takes the device size
in bytes as the first argument, and the blocksize as the second argument,
simplifying the calculations required in most callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nbd_size_update is about to acquire a few more callers, so lift the check
into the function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Block driver have no business setting the file system concept of a
block size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bdget_disk needs to be paired with bdput to not leak a reference
on the block device inode.
Fixes: 08ba91ee6e ("nbd: Add the nbd NBD_DISCONNECT_ON_CLOSE config flag.")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mounted NBD device can be resized, one use case is rbd-nbd.
Fix the issue by setting up default block size, then not touch it
in nbd_size_update() any more. This kind of usage is aligned with loop
which has same use case too.
Cc: stable@vger.kernel.org
Fixes: c8a83a6b54 ("nbd: Use set_blocksize() to set device blocksize")
Reported-by: lining <lining2020x@163.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Jan Kara <jack@suse.cz>
Tested-by: lining <lining2020x@163.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=dFJi
-----END PGP SIGNATURE-----
Merge tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph
- rdma error handling fixes (Chao Leng)
- fc error handling and reconnect fixes (James Smart)
- fix the qid displace when tracing ioctl command (Keith Busch)
- don't use BLK_MQ_REQ_NOWAIT for passthru (Chaitanya Kulkarni)
- fix MTDT for passthru (Logan Gunthorpe)
- blacklist Write Same on more devices (Kai-Heng Feng)
- fix an uninitialized work struct (zhenwei pi)"
- lightnvm out-of-bounds fix (Colin)
- SG allocation leak fix (Doug)
- rnbd fixes (Gioh, Guoqing, Jack)
- zone error translation fixes (Keith)
- kerneldoc markup fix (Mauro)
- zram lockdep fix (Peter)
- Kill unused io_context members (Yufen)
- NUMA memory allocation cleanup (Xianting)
- NBD config wakeup fix (Xiubo)
* tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block: (27 commits)
block: blk-mq: fix a kernel-doc markup
nvme-fc: shorten reconnect delay if possible for FC
nvme-fc: wait for queues to freeze before calling update_hr_hw_queues
nvme-fc: fix error loop in create_hw_io_queues
nvme-fc: fix io timeout to abort I/O
null_blk: use zone status for max active/open
nvmet: don't use BLK_MQ_REQ_NOWAIT for passthru
nvmet: cleanup nvmet_passthru_map_sg()
nvmet: limit passthru MTDS by BIO_MAX_PAGES
nvmet: fix uninitialized work for zero kato
nvme-pci: disable Write Zeroes on Sandisk Skyhawk
nvme: use queuedata for nvme_req_qid
nvme-rdma: fix crash due to incorrect cqe
nvme-rdma: fix crash when connect rejected
block: remove unused members for io_context
blk-mq: remove the calling of local_memory_node()
zram: Fix __zram_bvec_{read,write}() locking order
skd_main: remove unused including <linux/version.h>
sgl_alloc_order: fix memory leak
lightnvm: fix out-of-bounds write to array devices->info[]
...
Add redirect_neigh() BPF packet redirect helper, allowing to limit stack
traversal in common container configs and improving TCP back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
Expand netlink policy support and improve policy export to user space.
(Ge)netlink core performs request validation according to declared
policies. Expand the expressiveness of those policies (min/max length
and bitmasks). Allow dumping policies for particular commands.
This is used for feature discovery by user space (instead of kernel
version parsing or trial and error).
Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge.
Allow more than 255 IPv4 multicast interfaces.
Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
In Multi-patch TCP (MPTCP) support concurrent transmission of data
on multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
Support SMC-Dv2 version of SMC, which enables multi-subnet deployments.
Allow more calls to same peer in RxRPC.
Support two new Controller Area Network (CAN) protocols -
CAN-FD and ISO 15765-2:2016.
Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
Add TC actions for implementing MPLS L2 VPNs.
Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary notifications
and make it easier to offload nexthops into HW by converting
to a blocking notifier.
Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific
TCP option use.
Reorganize TCP congestion control (CC) initialization to simplify life
of TCP CC implemented in BPF.
Add support for shipping BPF programs with the kernel and loading them
early on boot via the User Mode Driver mechanism, hence reusing all the
user space infra we have.
Support sleepable BPF programs, initially targeting LSM and tracing.
Add bpf_d_path() helper for returning full path for given 'struct path'.
Make bpf_tail_call compatible with bpf-to-bpf calls.
Allow BPF programs to call map_update_elem on sockmaps.
Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
Support listing and getting information about bpf_links via the bpf
syscall.
Enhance kernel interfaces around NIC firmware update. Allow specifying
overwrite mask to control if settings etc. are reset during update;
report expected max time operation may take to users; support firmware
activation without machine reboot incl. limits of how much impact
reset may have (e.g. dropping link or not).
Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
Adopt or extend devlink use for debug, monitoring, fw update
in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw,
mv88e6xxx, dpaa2-eth).
In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
Add XDP support for Intel's igb driver.
Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
Improve performance for packets which don't require much offloads
on recent Mellanox NICs by 20% by making multiple packets share
a descriptor entry.
Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto
subtree to drivers/net. Move MDIO drivers out of the phy directory.
Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bc1U
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).
- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.
- Allow more than 255 IPv4 multicast interfaces.
- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.
- Allow more calls to same peer in RxRPC.
- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.
- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
- Add TC actions for implementing MPLS L2 VPNs.
- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.
- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.
- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.
- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.
- Support sleepable BPF programs, initially targeting LSM and tracing.
- Add bpf_d_path() helper for returning full path for given 'struct
path'.
- Make bpf_tail_call compatible with bpf-to-bpf calls.
- Allow BPF programs to call map_update_elem on sockmaps.
- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
- Support listing and getting information about bpf_links via the bpf
syscall.
- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).
- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).
- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
- Add XDP support for Intel's igb driver.
- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.
- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.
- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...
There has one race case for ceph's rbd-nbd tool. When do mapping
it may fail with EBUSY from ioctl(nbd, NBD_DO_IT), but actually
the nbd device has already unmaped.
It dues to if just after the wake_up(), the recv_work() is scheduled
out and defers calling the nbd_config_put(), though the map process
has exited the "nbd->recv_task" is not cleared.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bulk of the genetlink users can use smaller ops, move them.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can only scan for partitions on the whole disk, so move the flag
from struct block_device to struct gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace bd_invalidate with a new BDEV_NEED_PART_SCAN flag in a bd_flags
variable to better describe the condition.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace bd_set_size with a version that takes the number of sectors
instead, as that fits most of the current and future callers much better.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we configured io timeout of nbd0 to 100s. Later after we
finished using it, we configured nbd0 again and set the io
timeout to 0. We expect it would timeout after 30 seconds
and keep retry. But in fact we could not change the timeout
when we set it to 0. the timeout is still the original 100s.
So change the timeout to default 30s when we set it to zero.
It also behaves same as commit 2da22da573 ("nbd: fix zero
cmd timeout handling v2").
It becomes more important if we were reconfigure a nbd device
and the io timeout it set to zero. Because it could take 30s
to detect the new socket and thus io could be completed more
quickly compared to 100s.
Signed-off-by: Hou Pu <houpu@bytedance.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=abJG
-----END PGP SIGNATURE-----
Merge tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
"Good amount of cleanups and tech debt removals in here, and as a
result, the diffstat shows a nice net reduction in code.
- Softirq completion cleanups (Christoph)
- Stop using ->queuedata (Christoph)
- Cleanup bd claiming (Christoph)
- Use check_events, moving away from the legacy media change
(Christoph)
- Use inode i_blkbits consistently (Christoph)
- Remove old unused writeback congestion bits (Christoph)
- Cleanup/unify submission path (Christoph)
- Use bio_uninit consistently, instead of bio_disassociate_blkg
(Christoph)
- sbitmap cleared bits handling (John)
- Request merging blktrace event addition (Jan)
- sysfs add/remove race fixes (Luis)
- blk-mq tag fixes/optimizations (Ming)
- Duplicate words in comments (Randy)
- Flush deferral cleanup (Yufen)
- IO context locking/retry fixes (John)
- struct_size() usage (Gustavo)
- blk-iocost fixes (Chengming)
- blk-cgroup IO stats fixes (Boris)
- Various little fixes"
* tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits)
block: blk-timeout: delete duplicated word
block: blk-mq-sched: delete duplicated word
block: blk-mq: delete duplicated word
block: genhd: delete duplicated words
block: elevator: delete duplicated word and fix typos
block: bio: delete duplicated words
block: bfq-iosched: fix duplicated word
iocost_monitor: start from the oldest usage index
iocost: Fix check condition of iocg abs_vdebt
block: Remove callback typedefs for blk_mq_ops
block: Use non _rcu version of list functions for tag_set_list
blk-cgroup: show global disk stats in root cgroup io.stat
blk-cgroup: make iostat functions visible to stat printing
block: improve discard bio alignment in __blkdev_issue_discard()
block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers
block: defer flush request no matter whether we have elevator
block: make blk_timeout_init() static
block: remove retry loop in ioc_release_fn()
block: remove unnecessary ioc nested locking
block: integrate bd_start_claiming into __blkdev_get
...
When adding first socket to nbd, if nsock's allocation failed, the data
structure member "config->socks" was reallocated, but the data structure
member "config->num_connections" was not updated. A memory leak will occur
then because the function "nbd_config_put" will free "config->socks" only
when "config->num_connections" is not zero.
Fixes: 03bf73c315 ("nbd: prevent memory leak")
Reported-by: syzbot+934037347002901b8d2a@syzkaller.appspotmail.com
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the call to blk_should_fake_timeout out of blk_mq_complete_request
and into the drivers, skipping call sites that are obvious error
handlers, and remove the now superflous blk_mq_force_complete_rq helper.
This ensures we don't keep injecting errors into completions that just
terminate the Linux request after the hardware has been reset or the
command has been aborted.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In commit 2da22da573 (nbd: fix zero cmd timeout handling v2),
it is allowed to reset timer when it fires if tag_set.timeout
is set to zero. If the server is shutdown and a new socket
is reconfigured, the request should be requeued to be processed by
new server instead of waiting for response from the old one.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Hou Pu <houpu@bytedance.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nbd server with multiple connections could be upgraded since
560bc4b (nbd: handle dead connections). But if only one conncection
is configured, after we take down nbd server, all inflight IO
would finally timeout and return error. We could requeue them
like what we do with multiple connections and wait for new socket
in submit path.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Hou Pu <houpu@bytedance.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When kzalloc fail, may cause trying to destroy the
workqueue from inside the workqueue.
If num_connections is m (2 < m), and NO.1 ~ NO.n
(1 < n < m) kzalloc are successful. The NO.(n + 1)
failed. Then, nbd_start_device will return ENOMEM
to nbd_start_device_ioctl, and nbd_start_device_ioctl
will return immediately without running flush_workqueue.
However, we still have n recv threads. If nbd_release
run first, recv threads may have to drop the last
config_refs and try to destroy the workqueue from
inside the workqueue.
To fix it, add a flush_workqueue in nbd_start_device.
Fixes: e9e006f5fc ("nbd: fix max number of supported devs")
Signed-off-by: Sun Ke <sunke32@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This fixes a regression added with:
commit e9e006f5fc
Author: Mike Christie <mchristi@redhat.com>
Date: Sun Aug 4 14:10:06 2019 -0500
nbd: fix max number of supported devs
where we can deadlock during device shutdown. The problem occurs if
the recv_work's nbd_config_put occurs after nbd_start_device_ioctl has
returned and the userspace app has droppped its reference via closing
the device and running nbd_release. The recv_work nbd_config_put call
would then drop the refcount to zero and try to destroy the config which
would try to do destroy_workqueue from the recv work.
This patch just has nbd_start_device_ioctl do a flush_workqueue when it
wakes so we know after the ioctl returns running works have exited. This
also fixes a possible race where we could try to reuse the device while
old recv_works are still running.
Cc: stable@vger.kernel.org
Fixes: e9e006f5fc ("nbd: fix max number of supported devs")
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=oyE3
-----END PGP SIGNATURE-----
Merge tag 'for-5.5/drivers-post-20191122' of git://git.kernel.dk/linux-block
Pull additional block driver updates from Jens Axboe:
"Here's another block driver update, done to avoid conflicts with the
zoned changes coming next.
This contains:
- Prepare SCSI sd for zone open/close/finish support
- Small NVMe pull request
- hwmon support (Akinobu)
- add new co-maintainer (Christoph)
- work-around for a discard issue on non-conformant drives
(Eduard)
- Small nbd leak fix"
* tag 'for-5.5/drivers-post-20191122' of git://git.kernel.dk/linux-block:
nbd: prevent memory leak
nvme: hwmon: add quirk to avoid changing temperature threshold
nvme: hwmon: provide temperature min and max values for each sensor
nvmet: add another maintainer
nvme: Discard workaround for non-conformant devices
nvme: Add hardware monitoring support
scsi: sd_zbc: add zone open, close, and finish support
In nbd_add_socket when krealloc succeeds, if nsock's allocation fail the
reallocted memory is leak. The correct behaviour should be assigning the
reallocted memory to config->socks right after success.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Before returning NULL, put the sock first.
Cc: stable@vger.kernel.org
Fixes: cf1b2326b7 ("nbd: verify socket is supported during setup")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Sun Ke <sunke32@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nbd requires socket families to support the shutdown method so the nbd
recv workqueue can be woken up from its sock_recvmsg call. If the socket
does not support the callout we will leave recv works running or get hangs
later when the device or module is removed.
This adds a check during socket connection/reconnection to make sure the
socket being passed in supports the needed callout.
Reported-by: syzbot+24c12fa8d218ed26011a@syzkaller.appspotmail.com
Fixes: e9e006f5fc ("nbd: fix max number of supported devs")
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We hit the following warning in production
print_req_error: I/O error, dev nbd0, sector 7213934408 flags 80700
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 25 PID: 32407 at lib/refcount.c:190 refcount_sub_and_test_checked+0x53/0x60
Workqueue: knbd-recv recv_work [nbd]
RIP: 0010:refcount_sub_and_test_checked+0x53/0x60
Call Trace:
blk_mq_free_request+0xb7/0xf0
blk_mq_complete_request+0x62/0xf0
recv_work+0x29/0xa1 [nbd]
process_one_work+0x1f5/0x3f0
worker_thread+0x2d/0x3d0
? rescuer_thread+0x340/0x340
kthread+0x111/0x130
? kthread_create_on_node+0x60/0x60
ret_from_fork+0x1f/0x30
---[ end trace b079c3c67f98bb7c ]---
This was preceded by us timing out everything and shutting down the
sockets for the device. The problem is we had a request in the queue at
the same time, so we completed the request twice. This can actually
happen in a lot of cases, we fail to get a ref on our config, we only
have one connection and just error out the command, etc.
Fix this by checking cmd->status in nbd_read_stat. We only change this
under the cmd->lock, so we are safe to check this here and see if we've
already error'ed this command out, which would indicate that we've
completed it as well.
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We already do this for the most part, except in timeout and clear_req.
For the timeout case we take the lock after we grab a ref on the config,
but that isn't really necessary because we're safe to touch the cmd at
this point, so just move the order around.
For the clear_req cause this is initiated by the user, so again is safe.
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
1. nbd_put takes the mutex and drops nbd->ref to 0. It then does
idr_remove and drops the mutex.
2. nbd_genl_connect takes the mutex. idr_find/idr_for_each fails
to find an existing device, so it does nbd_dev_add.
3. just before the nbd_put could call nbd_dev_remove or not finished
totally, but if nbd_dev_add try to add_disk, we can hit:
debugfs: Directory 'nbd1' with parent 'block' already present!
This patch will make sure all the disk add/remove stuff are done
by holding the nbd_index_mutex lock.
Reported-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Preparing for the destory when disconnecting crash fixing.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This fixes a bug added in 4.10 with commit:
commit 9561a7ade0
Author: Josef Bacik <jbacik@fb.com>
Date: Tue Nov 22 14:04:40 2016 -0500
nbd: add multi-connection support
that limited the number of devices to 256. Before the patch we could
create 1000s of devices, but the patch switched us from using our
own thread to using a work queue which has a default limit of 256
active works.
The problem is that our recv_work function sits in a loop until
disconnection but only handles IO for one connection. The work is
started when the connection is started/restarted, but if we end up
creating 257 or more connections, the queue_work call just queues
connection257+'s recv_work and that waits for connection 1 - 256's
recv_work to be disconnected and that work instance completing.
Instead of reverting back to kthreads, this has us allocate a
workqueue_struct per device, so we can block in the work.
Cc: stable@vger.kernel.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This fixes a regression added in 4.9 with commit:
commit 0eadf37afc
Author: Josef Bacik <jbacik@fb.com>
Date: Thu Sep 8 12:33:40 2016 -0700
nbd: allow block mq to deal with timeouts
where before the patch userspace would set the timeout to 0 to disable
it. With the above patch, a zero timeout tells the block layer to use
the default value of 30 seconds. For setups where commands can take a
long time or experience transient issues like network disruptions this
then results in IO errors being sent to the application.
To fix this, the patch still uses the common block layer timeout
framework, but if zero is set, nbd just logs a message and then resets
the timer when it expires.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix bug added with the patch:
commit 8f3ea35929
Author: Josef Bacik <josef@toxicpanda.com>
Date: Mon Jul 16 12:11:35 2018 -0400
nbd: handle unexpected replies better
where if the timeout handler runs when the completion path is and we fail
to grab the mutex in the timeout handler we will leave a config reference
and cannot free the config later.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds a helper function to convert a block req op to a nbd cmd type.
It will be used in the last patch to log the type in the timeout
handler.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to set the cmd timeout. It does not really do a lot now,
but will be more useful in the next patches.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit abbbdf1249 ("replace kill_bdev() with __invalidate_device()")
once did this, but 29eaadc036 ("nbd: stop using the bdev everywhere")
resurrected kill_bdev() and it has been there since then. So buffer_head
mappings still get killed on a server disconnection, and we can still
hit the BUG_ON on a filesystem on the top of the nbd device.
EXT4-fs (nbd0): mounted filesystem with ordered data mode. Opts: (null)
block nbd0: Receive control failed (result -32)
block nbd0: shutting down sockets
print_req_error: I/O error, dev nbd0, sector 66264 flags 3000
EXT4-fs warning (device nbd0): htree_dirblock_to_tree:979: inode #2: lblock 0: comm ls: error -5 reading directory block
print_req_error: I/O error, dev nbd0, sector 2264 flags 3000
EXT4-fs error (device nbd0): __ext4_get_inode_loc:4690: inode #2: block 283: comm ls: unable to read itable block
EXT4-fs error (device nbd0) in ext4_reserve_inode_write:5894: IO failure
------------[ cut here ]------------
kernel BUG at fs/buffer.c:3057!
invalid opcode: 0000 [#1] SMP PTI
CPU: 7 PID: 40045 Comm: jbd2/nbd0-8 Not tainted 5.1.0-rc3+ #4
Hardware name: Amazon EC2 m5.12xlarge/, BIOS 1.0 10/16/2017
RIP: 0010:submit_bh_wbc+0x18b/0x190
...
Call Trace:
jbd2_write_superblock+0xf1/0x230 [jbd2]
? account_entity_enqueue+0xc5/0xf0
jbd2_journal_update_sb_log_tail+0x94/0xe0 [jbd2]
jbd2_journal_commit_transaction+0x12f/0x1d20 [jbd2]
? __switch_to_asm+0x40/0x70
...
? lock_timer_base+0x67/0x80
kjournald2+0x121/0x360 [jbd2]
? remove_wait_queue+0x60/0x60
kthread+0xf8/0x130
? commit_timeout+0x10/0x10 [jbd2]
? kthread_bind+0x10/0x10
ret_from_fork+0x35/0x40
With __invalidate_device(), I no longer hit the BUG_ON with sync or
unmount on the disconnected device.
Fixes: 29eaadc036 ("nbd: stop using the bdev everywhere")
Cc: linux-block@vger.kernel.org
Cc: Ratna Manoj Bolla <manoj.br@gmail.com>
Cc: nbd@other.debian.org
Cc: stable@vger.kernel.org
Cc: David Woodhouse <dwmw@amazon.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Munehisa Kamata <kamatam@amazon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the device is setup with ioctl we can resize the device after the
initial setup, but if the device is setup with netlink we cannot use the
resize related ioctls and there is no netlink reconfigure size ATTR
handling code.
This patch adds netlink reconfigure resize support to match the ioctl
interface.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Wang Qing