There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic
version of the MMIO accessors, which is intended to help
understand problems with device drivers and has been part
of Qualcomm's vendor kernels for many years.
- A patch from Sebastian Siewior to rework the handling of
IRQ stacks in softirqs across architectures, which is
needed for enabling PREEMPT_RT.
- The last patch to remove the CONFIG_VIRT_TO_BUS option and
some of the code behind that, after the last users of this
old interface made it in through the netdev, scsi, media and
staging trees.
-----BEGIN PGP SIGNATURE-----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=aTR0
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic version
of the MMIO accessors, which is intended to help understand
problems with device drivers and has been part of Qualcomm's vendor
kernels for many years
- A patch from Sebastian Siewior to rework the handling of IRQ stacks
in softirqs across architectures, which is needed for enabling
PREEMPT_RT
- The last patch to remove the CONFIG_VIRT_TO_BUS option and some of
the code behind that, after the last users of this old interface
made it in through the netdev, scsi, media and staging trees"
* tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
uapi: asm-generic: fcntl: Fix typo 'the the' in comment
arch/*/: remove CONFIG_VIRT_TO_BUS
soc: qcom: geni: Disable MMIO tracing for GENI SE
serial: qcom_geni_serial: Disable MMIO tracing for geni serial
asm-generic/io: Add logging support for MMIO accessors
KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM
lib: Add register read/write tracing support
drm/meson: Fix overflow implicit truncation warnings
irqchip/tegra: Fix overflow implicit truncation warnings
coresight: etm4x: Use asm-generic IO memory barriers
arm64: io: Use asm-generic high level MMIO accessors
arch/*: Disable softirq stacks on PREEMPT_RT.
When enabled, all taken branch addresses are output, even if the branch
was because of a direct branch instruction. This enables reconstruction
of the program flow without having access to the memory image of the
code being executed.
Use bit 8 for the config option which would be the correct bit for
programming ETMv3. Although branch broadcast can't be enabled on ETMv3
because it's not in the define ETM3X_SUPPORTED_OPTIONS, using the
correct bit might help prevent future collisions or allow it to be
enabled if needed.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220511144601.2257870-2-james.clark@arm.com
Per discussion in [1], it was decided to move to using architecture
independent/asm-generic IO memory barriers to have just one set of
them and deprecate use of arm64 specific IO memory barriers in driver
code. So replace current usage of __io_rmb()/__iowmb() in drivers to
__io_ar()/__io_bw().
[1] https://lore.kernel.org/lkml/CAK8P3a0L2tLeF1Q0+0ijUxhGNaw+Z0fyPC1oW6_ELQfn0=i4iw@mail.gmail.com/
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-13-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-10-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-7-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-6-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-5-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-4-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-3-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-2-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The spec says this:
P0 tracing support field. The permitted values are:
0b00 Tracing of load and store instructions as P0 elements is not
supported.
0b11 Tracing of load and store instructions as P0 elements is
supported, so TRCCONFIGR.INSTP0 is supported.
All other values are reserved.
The value we are looking for is 0b11 so simplify this. The double read
and && was a bit obfuscated.
Suggested-by: Suzuki Poulose <suzuki.poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20220203115336.119735-2-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Adds configfs attributes to allow a configuration to be enabled for use
when sysfs is used to control CoreSight.
perf retains independent enabling of configurations.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20211124200038.28662-6-mike.leach@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add ETM PID for Kryo-5XX to the list of supported ETMs.
Otherwise, Kryo-5XX ETMs will not be initialized successfully.
e.g.
This change can be verified on qrb5165-rb5 board. ETM4-ETM7 nodes
will not be visible without this change.
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Link: https://lore.kernel.org/r/1632477981-13632-2-git-send-email-quic_taozha@quicinc.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The Trace Filtering support (FEAT_TRF) ensures that the ETM
can be prohibited from generating any trace for a given EL.
This is much stricter knob, than the TRCVICTLR exception level
masks, which doesn't prevent the ETM from generating Context
packets for an "excluded" EL. At the moment, we do a onetime
enable trace at user and kernel and leave it untouched for the
kernel life time. This implies that the ETM could potentially
generate trace packets containing the kernel addresses, and
thus leaking the kernel virtual address in the trace.
This patch makes the switch dynamic, by honoring the filters
set by the user and enforcing them in the TRFCR controls.
We also rename the cpu_enable_tracing() appropriately to
cpu_detect_trace_filtering() and the drvdata member
trfc => trfcr to indicate the "value" of the TRFCR_EL1.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Al Grant <al.grant@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20210914102641.1852544-3-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
When the CPU enters a low power mode, the TRFCR_EL1 contents could be
reset. Thus we need to save/restore the TRFCR_EL1 along with the ETM4x
registers to allow the tracing.
The TRFCR related helpers are in a new header file, as we need to use
them for TRBE in the later patches.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210914102641.1852544-2-suzuki.poulose@arm.com
[Fixed cosmetic details]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation,
zap under read lock, enable/disably dirty page logging under
read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing
the architecture-specific code
- Some selftests improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCJ13kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM1HAgAqzPxEtiTPTFeFJV5cnPPJ3dFoFDK
y/juZJUQ1AOtvuWzzwuf175ewkv9vfmtG6rVohpNSkUlJYeoc6tw7n8BTTzCVC1b
c/4Dnrjeycr6cskYlzaPyV6MSgjSv5gfyj1LA5UEM16LDyekmaynosVWY5wJhju+
Bnyid8l8Utgz+TLLYogfQJQECCrsU0Wm//n+8TWQgLf1uuiwshU5JJe7b43diJrY
+2DX+8p9yWXCTz62sCeDWNahUv8AbXpMeJ8uqZPYcN1P0gSEUGu8xKmLOFf9kR7b
M4U1Gyz8QQbjd2lqnwiWIkvRLX6gyGVbq2zH0QbhUe5gg3qGUX7JjrhdDQ==
=AXUi
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This is a large update by KVM standards, including AMD PSP (Platform
Security Processor, aka "AMD Secure Technology") and ARM CoreSight
(debug and trace) changes.
ARM:
- CoreSight: Add support for ETE and TRBE
- Stage-2 isolation for the host kernel when running in protected
mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- AMD PSP driver changes
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation, zap under
read lock, enable/disably dirty page logging under read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing the
architecture-specific code
- a handful of "Get rid of oprofile leftovers" patches
- Some selftests improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
KVM: selftests: Speed up set_memory_region_test
selftests: kvm: Fix the check of return value
KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
KVM: SVM: Skip SEV cache flush if no ASIDs have been used
KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
KVM: SVM: Drop redundant svm_sev_enabled() helper
KVM: SVM: Move SEV VMCB tracking allocation to sev.c
KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
KVM: SVM: Unconditionally invoke sev_hardware_teardown()
KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
KVM: SVM: Move SEV module params/variables to sev.c
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
x86/sev: Drop redundant and potentially misleading 'sev_enabled'
KVM: x86: Move reverse CPUID helpers to separate header file
KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
...
Add ETE as one of the supported device types we support
with ETM4x driver. The devices are named following the
existing convention as ete<N>.
ETE mandates that the trace resource status register is programmed
before the tracing is turned on. For the moment simply write to
it indicating TraceActive.
Cc: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210405164307.1720226-14-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add support for handling the system registers for Embedded Trace
Extensions (ETE). ETE shares most of the registers with ETMv4 except
for some and also adds some new registers. Re-arrange the ETMv4x list
to share the common definitions and add the ETE sysreg support.
Cc: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210405164307.1720226-13-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
ETE may not implement the OS lock and instead could rely on
the PE OS Lock for the trace unit access. This is indicated
by the TRCOLSR.OSM == 0b100. Add support for handling the
PE OS lock
Cc: Mike Leach <mike.leach@linaro.org>
Reviewed-by: mike.leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210405164307.1720226-12-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
If the CPU implements Arm v8.4 Trace filter controls (FEAT_TRF),
move the ETM to trace prohibited region using TRFCR, while disabling.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210405164307.1720226-9-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
When the kernel is running at EL2, the PID is stored in CONTEXTIDR_EL2.
So, tracing CONTEXTIDR_EL1 doesn't give us the pid of the process.
Thus we should trace the VMID with VMIDOPT set to trace CONTEXTIDR_EL2
instead of CONTEXTIDR_EL1. Given that we have an existing config
option "contextid" and this will be useful for tracing virtual machines
(when we get to support virtualization).
So instead, this patch extends option CTXTID with an extra bit
ETM_OPT_CTXTID2 (bit 15), thus on an EL2 kernel, we will have another
bit available for the perf tool: ETM_OPT_CTXTID is for kernel running in
EL1, ETM_OPT_CTXTID2 is used when kernel runs in EL2 with VHE enabled.
The tool must be backward compatible for users, i.e, "contextid" today
traces PID and that should remain the same; for this purpose, the perf
tool is updated to automatically set corresponding bit for the
"contextid" config, therefore, the user doesn't have to bother which EL
the kernel is running.
i.e, perf record -e cs_etm/contextid/u --
will always do the "pid" tracing, independent of the kernel EL.
The driver parses the format "contextid", which traces CONTEXTIDR_EL1
for ETM_OPT_CTXTID (on EL1 kernel) and traces CONTEXTIDR_EL2 for
ETM_OPT_CTXTID2 (on EL2 kernel).
Besides the enhancement for format "contexid", extra two formats are
introduced: "contextid1" and "contextid2". This considers to support
tracing both CONTEXTIDR_EL1 and CONTEXTIDR_EL2 when the kernel is
running at EL2. Finally, the PMU formats are defined as follow:
"contextid1": Available on both EL1 kernel and EL2 kernel. When the
kernel is running at EL1, "contextid1" enables the PID
tracing; when the kernel is running at EL2, this enables
tracing the PID of guest applications.
"contextid2": Only usable when the kernel is running at EL2. When
selected, enables PID tracing on EL2 kernel.
"contextid": Will be an alias for the option that enables PID
tracing. I.e,
contextid == contextid1, on EL1 kernel.
contextid == contextid2, on EL2 kernel.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Al Grant <al.grant@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[ Added two config formats: contextid1, contextid2 ]
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210206150833.42120-4-leo.yan@linaro.org
Link: https://lore.kernel.org/r/20210211172038.2483517-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This was non-trivial to get right because commits
c23bc382ef ("coresight: etm4x: Refactor probing routine") and
5214b56358 ("coresight: etm4x: Add support for sysreg only devices")
changed the code flow considerably. With this change the driver can be
built again.
Fixes: 0573d3fa48 ("Merge branch 'devel-stable' of git://git.armlinux.org.uk/~rmk/linux-arm into char-misc-next")
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210205130848.20009-1-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This merges from linux-arm at 860660fd82 ("ARM: 9055/1: mailbox:
arm_mhuv2: make remove callback return void") into char-misc-next to get
the amba fixes from Uwe.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
v8.4 tracing extensions added support for trace filtering controlled
by TRFCR_ELx. This must be programmed to allow tracing at EL1/EL2 and
EL0. The timestamp used is the virtual time. Also enable CONTEXIDR_EL2
tracing if we are running the kernel at EL2.
Link: https://lore.kernel.org/r/20210110224850.1880240-29-suzuki.poulose@arm.com
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Jonathan Zhou <jonathan.zhouwen@huawei.com>
[ Move the trace filtering setup etm_init_arch_data() and clean ups]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-31-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As we are about to add support for system register based devices,
we don't get an AMBA pid. So, the detection code could check
the system registers running on the CPU to check for the architecture
specific features. Thus we move the arch feature detection to
run on the CPU. We cannot always read the PID from the HW, as the
PID could be overridden by DT for broken devices. So, use the
PID from AMBA layer if available.
Link: https://lore.kernel.org/r/20210110224850.1880240-25-suzuki.poulose@arm.com
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: liuqi115@huawei.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-27-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are about to rely on TRCDEVARCH for detecting the ETM
and its architecture version, falling back to TRCIDR1 if
the former is not implemented (in older broken implementations).
Also, we use the architecture version information to
make some decisions. Streamline the architecture version
handling by adding helpers.
Link: https://lore.kernel.org/r/20210110224850.1880240-18-suzuki.poulose@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-20-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
etm4_get_access_type() calculates the exception level bits
for use in address comparator registers. This is also used
by the TRCVICTLR register by shifting to the required position.
This patch cleans up the logic to make etm4_get_access_type()
calculate a generic mask which can be used by all users by
shifting to their field.
No functional changes intended.
Link: https://lore.kernel.org/r/20210110224850.1880240-17-suzuki.poulose@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-19-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ETM architecture defines the system instructions for accessing
via register accesses. Add basic support for accessing a given
register via system instructions.
We split the list of registers as :
1) Accessible only from memory mapped interface
2) Accessible from system register instructions.
All registers are accessible via the memory-mapped interface.
However, some registers are not accessible via the system
instructions. This list is then used to further filter out
the files we expose via sysfs.
Link: https://lore.kernel.org/r/20210110224850.1880240-12-suzuki.poulose@arm.com
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-14-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert all register accesses from etm4x driver to use a wrapper
to allow switching the access at runtime with little overhead.
co-developed by sed tool ;-), mostly equivalent to :
s/readl\(_relaxed\)\?(drvdata->base + \(.*\))/etm4x_\1_read32(csdev, \2)
s/writel\(_relaxed\)\?(\(.*\), drvdata->base + \(.*\))/etm4x_\1_write32(csdev, \2, \3)
We don't want to replace them with the csdev_access_* to
avoid a function call for every register access for system
register access. This is a prepartory step to add system
register access later where the support is available.
Link: https://lore.kernel.org/r/20210110224850.1880240-9-suzuki.poulose@arm.com
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-11-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are about to introduce support for sysreg access to ETMv4.4+
component. Since there are generic routines that access the
registers (e.g, CS_LOCK/UNLOCK , claim/disclaim operations, timeout)
and in order to preserve the logic of these operations at a
single place we introduce an abstraction layer for the accesses
to a given device.
Link: https://lore.kernel.org/r/20210110224850.1880240-4-suzuki.poulose@arm.com
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the ETM is affected by Qualcomm errata, modifying the
TRCPDCR could cause the system hang. Even though this is
taken care of during enable/disable ETM, the ETM state
save/restore could still access the TRCPDCR. Make sure
we skip the access during the save/restore.
Found by code inspection.
Link: https://lore.kernel.org/r/20210110224850.1880240-3-suzuki.poulose@arm.com
Fixes: 02510a5aa7 ("coresight: etm4x: Add support to skip trace unit power up")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Cc: Tingwei Zhang <tingwei@codeaurora.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-5-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds