Resync from rnndb database, to pull in register defines for:
* eDP
* HDMI/HDCP
* mdp4/mdp5 YUV support
* mdp5 hw cursor support
Signed-off-by: Rob Clark <robdclark@gmail.com>
On !SMP systems spinlocks do not exist. Thus checking of they
are active will always fail.
Use
assert_spin_locked(lock);
instead of
BUG_ON(!spin_is_locked(lock));
to not BUG() on all UP systems.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
[robclark: drop stray ')']
Signed-off-by: Rob Clark <robdclark@gmail.com>
3d3f8b1f8b ("drm/bridge: make bridge registration independent of drm
flow") resulted that the hdmi bridge object would be leaked at teardown.
Just switch over to devm_kzalloc() as the easy way to solve this.
Signed-off-by: Rob Clark <robdclark@gmail.com>
As a result of atomic DPMS support, the various prepare/commit hooks get
called in a way that msm dislikes. We were expecting prepare/commit to
bracket a modeset, which is no longer the case. This was needed to hold
various extra clk's (such as interface clks) on while we are touching
registers, and in the case of mdp4 holding vblank enabled.
The most straightforward way to deal with this, since we already have
our own atomic_commit(), is to just handle prepare/commit internally to
the driver (with some additional vfuncs for mdp4 vs mdp5), and switch
everything over to instead use the new enable/disable hooks. It doesn't
really change too much, despite the code motion. What used to be in the
encoder/crtc dpms() fxns is split out into enable/disable.
We should be able to drop our own enable-state tracking, as the atomic
helpers should do this for us. But keeping that for the short term for
extra debugging as atomic stablizes.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Only the legacy helpers use these entry points. Don't populate them
with transitional helpers, since that just makes things more confusing.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[robclark: reword commit msg]
Signed-off-by: Rob Clark <robdclark@gmail.com>
We had _power_up(), but drivers also need to be able to power down.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The atmel-hlcdc driver selects DRM_GEM_CMA_HELPER which makes use of
symbols only available when HAVE_DMA_ATTRS is selected.
Add a dependency on the ARM architecture which select this option.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
The msm gpu drivers depend on both the DT mechanism and the
common clk handling code, if they are not enabled, we get
a number of build errors:
In file included from drivers/gpu/drm/msm/hdmi/hdmi.h:27:0,
from drivers/gpu/drm/msm/hdmi/hdmi_bridge.c:18:
drivers/gpu/drm/msm/msm_drv.h:45:24: fatal error: mach/board.h: No such file or directory
#include <mach/board.h>
^
drivers/gpu/drm/msm/hdmi/hdmi_phy_8960.c:503:2: error: implicit declaration of function 'devm_clk_register' [-Werror=implicit-function-declaration]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@gmail.com>
When page flipping, we need to mark the new fb as active and unmark the active
flag for the old fb (if different).
Signed-off-by: Haixia Shi <hshi@chromium.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Dave Airlie <airlied@gmail.com>
The shmobile drm driver selects BACKLIGHT_CLASS_DEVICE
as of 0a5a5499ad "drm: shmobile: Add dependency on
BACKLIGHT_CLASS_DEVICE", but that option in turn depends
on BACKLIGHT_LCD_SUPPORT, so we actually have to select
both, or alternatively use 'depends on BACKLIGHT_CLASS_DEVICE'.
Further, the driver uses FB_SH_MOBILE_MERAM if that is
enabled, but this breaks if MERAM is a module while
the DRM driver is built-in. To solve this, add a dependency
on "FB_SH_MOBILE_MERAM || !FB_SH_MOBILE_MERAM", which forces
DRM_SHMOBILE to be a module if FB_SH_MOBILE_MERAM set to 'm'.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@gmail.com>
The newly added sti driver requires the drm_panel helpers,
and we get a link error if they are not enabled
ERROR: "drm_panel_attach" [drivers/gpu/drm/sti/stidvo.ko] undefined!
ERROR: "of_drm_find_panel" [drivers/gpu/drm/sti/stidvo.ko] undefined!
This adds a 'select' statement as we have for the other drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@gmail.com>
When the reset controller subsystem is disabled, this driver
fails to build:
drivers/gpu/drm/rockchip/rockchip_drm_vop.c: In function 'vop_initial':
drivers/gpu/drm/rockchip/rockchip_drm_vop.c:1267:2: error: implicit declaration of function 'devm_reset_control_get' [-Werror=implicit-function-declaration]
The easiest solution is to add a dependency in Kconfig to avoid
that case.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@gmail.com>
The simple panel code uses the backlight interface to
find a device, which fails when backlight is disabled:
drivers/built-in.o: In function `panel_simple_platform_probe':
:(.text+0xd3c48): undefined reference to `of_find_backlight_by_node'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@gmail.com>
The sharp panel code uses the backlight interface to
find a device, which fails when backlight is disabled:
drivers/built-in.o: In function `sharp_panel_probe':
:(.text+0x5ceac): undefined reference to `of_find_backlight_by_node'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@gmail.com>
The run-length encoding algorithm should compare 16-bit encoded pixel
values instead of comparing raw pixel values. It allows pixels
with similar but different colors to be encoded as repeat pixels, and
thus potentially save USB bandwidth.
Signed-off-by: Haixia Shi <hshi@chromium.org>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: Haixia Shi <hshi@chromium.org>
Signed-off-by: Dave Airlie <airlied@gmail.com>
The get_config() functions for ddi and dp_mst, used to read the value
of cpu_transcoder from the crtc->config instead of the state passed as
an argument. On the hardware state readout path, that happens to work
since the proper value is written to it before encoder->get_config() is
called. However, in the check_crtc() path, the state will be read from
the cpu_transcoder in the software tracking, instead of the one just
read out from hw. Using the field in the supplied intel_crtc_state
should do the right thing in both cases.
v2: Fix intel_ddi_get_config() too. (Ander)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Remove request from list before unreferencing it, in case it's actually
the only reference. (Found by Tvrtko Ursulin)
This issue has been most likely introduced in
commit 6d3d8274bc
Author: Nick Hoath <nicholas.hoath@intel.com>
Date: Thu Jan 15 13:10:39 2015 +0000
drm/i915: Subsume intel_ctx_submit_request in to drm_i915_gem_request
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This simplifies __intel_set_mode() a little.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The checking for ack and also any subsequent mmio access
will serialize with setting the forcewake bit. Drop the
posting read as superfluous.
Note that in the put side we still want to keep the posting read
as it will ensure that the hw sees our forcewake release in a
timely manner and doesn't keep the hw powered up.
Comment from Chris:
On Wed, Jan 28, 2015 at 05:54:14PM +0200, Mika Kuoppala wrote:
> Ville Syrjälä <ville.syrjala@linux.intel.com> writes:
> > IIRC the posting read from same cache line actually fixed real bugs. So
> > I'm a bit worried about dropping them. But I suppose it's possible only
> > the _put side was important for those bugs.
>
> I found these:
>
> commit 6af2d180f8
> Author: Daniel Vetter <daniel.vetter@ffwll.ch>
> Date: Thu Jul 26 16:24:50 2012 +0200
>
> drm/i915: fix forcewake related hangs on snb
>
> commit 8dee3eea3c
> Author: Ben Widawsky <ben@bwidawsk.net>
> Date: Sat Sep 1 22:59:50 2012 -0700
>
> drm/i915: Never read FORCEWAKE
>
> https://bugs.freedesktop.org/show_bug.cgi?id=51738
> https://bugs.freedesktop.org/show_bug.cgi?id=52424
>
> The snb here seems to survive gem_dummy_reloc_loop and
> gem_ring_sync_loop in here with the get side posting removed.
Note that we kept the once associated with #52424, but judging by my
comments in #51738 the posting read is just a band aid anyway as a full
mb() itself was not adequate.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: paste relevant review discussion in.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
intel_uncore_early_sanitize() will reset the forcewake registers. When
forcewake domains were introduced, the domain init was done after the
sanitization of the forcewake registers. And as the resetting of
registers use the domain accessors, we tried to reset the forcewake
registers with unitialized forcewake domains and failed.
Fix this by sanitizing after all the domains have been initialized. Do
per domain clearing of forcewake register on domain init so that
IVB can do early access to ECOBUS do determine the final configuration.
This regression was introduced in
commit 05a2fb157e
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Mon Jan 19 16:20:43 2015 +0200
drm/i915: Consolidate forcewake code
v2: Carve out ellc detect, fw_domain_reset for ivb/ecobus (Chris)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88805
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Olof Johansson <olof@lixom.net>
Tested-by: Darren Hart <dvhart@linux.intel.com> (v1)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Move the CHV check into vlv_set_rps_idle() to simplify the caller a bit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now when we declare gpu errors only through our own dedicated
hangcheck workqueue there is no need to have a separate workqueue
for handling the resetting and waking up the clients as the deadlock
concerns are no more.
The only exception is i915_debugfs::i915_set_wedged, which triggers
error handling through process context. However as this is only used through
test harness it is responsibility for test harness not to introduce hangs
through both debug interface and through hangcheck mechanism at the same time.
Remove gpu_error.work and let the hangcheck work do the tasks it used to.
v2: Add a big warning sign into i915_debugfs::i915_set_wedged (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Include intel_uncore.c in template for it to include d
documentation for intel_uncore_forcewake_get and *_put.
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The removed functions can be resurrected in intel_dsi.c as need arises.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
No functional changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
All of these are replaced by the drm core mipi dsi functions.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use the drm core interfaces in preparation of removing our homebrew.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add basic support for using the drm mipi dsi framework for DSI. We don't
use device tree which is pretty much required by mipi_dsi_host_register
and friends, and we don't have the kind of device model the functions
expect either. So we cheat and use it as a library to abstract what we
need: a nice, clean interface for DSI transfers. This means we will have
to be careful with what functions we call, as the driver model devices
in mipi_dsi_host and mipi_dsi_device will *not* be initialized.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Replace intel_dsi_device and intel_dsi_dev_ops with drm_panel and
drm_panel_funcs. They are adequate for what we have now, and if we end
up needing more than this we should improve drm_panel. This will keep us
better aligned with the drm core infrastructure.
The panel driver initialization changes a bit. It still remains hideous,
but fixing that is beyond the scope here.
v2: extend mode config mutex to cover drm_panel_get_modes (Shobhit)
vbt_panel->intel_dsi = intel_dsi in vbt panel init (Shobhit)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The .enable_vblank() operation is only called when vblank interrupts are
disabled, but no similar check exists when disabling vblank interrupts.
This leads to .disable_vblank() being called with vblank interrupts
already disabled and the device possibly runtime suspended. As the
operation is called with a spinlock held drivers can't runtime resume
the device there and thus must avoid touching device registers in that
case, requiring vblank refcounting.
As the DRM core tracks whether vblank interrupts are enabled just skip
the .disable_vblank() call when the interrupts are already disabled.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Change agp_free_page_array to use kvfree function,
remove the duplicated code.
Signed-off-by: Yalin Wang <yalin.wang@sonymobile.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This backmerges drm-fixes into drm-next mainly for the amdkfd
stuff, I'm not 100% confident, but it builds and the amdkfd
folks can fix anything up.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Conflicts:
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
This contains the long-awaited drm_bridge series that makes Chromebooks
work for people. I had thought this would've been perfect by now, but
then I go and build test it and the first thing it does is yell about a
recursive dependency. I fixed that up because I was feeling bad for not
getting around to look at this earlier.
Biseds that there is new support for two more panels, a couple of fixup
patches to the Sharp LQ101R1SX01 dual-channel DSI panel driver and a
potential NULL pointer dereference fix.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=5PkY
-----END PGP SIGNATURE-----
Merge tag 'drm/panel/for-3.20-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/panel: Changes for v3.20-rc1
This contains the long-awaited drm_bridge series that makes Chromebooks
work for people. I had thought this would've been perfect by now, but
then I go and build test it and the first thing it does is yell about a
recursive dependency. I fixed that up because I was feeling bad for not
getting around to look at this earlier.
Biseds that there is new support for two more panels, a couple of fixup
patches to the Sharp LQ101R1SX01 dual-channel DSI panel driver and a
potential NULL pointer dereference fix.
* tag 'drm/panel/for-3.20-rc1' of git://anongit.freedesktop.org/tegra/linux: (23 commits)
drm/bridge: dw-hdmi: Adapt to bridge API change
drm/sti: fixup for bridge interface
drm/bridge: dw-hdmi: Fix return error path
drm: Check the right variable when setting formats
Documentation: bridge: Add documentation for ps8622 DT properties
Documentation: devicetree: Add vendor prefix for parade
Documentation: drm: bridge: move to video/bridge
drm/bridge: ptn3460: use gpiod interface
drm/bridge: ptn3460: probe connector at the end of bridge attach
drm/bridge: ptn3460: support drm_panel
drm/exynos: dp: support drm_bridge
drm/bridge: ptn3460: Convert to I2C driver model
drm/bridge: make bridge registration independent of drm flow
drm/bridge: do not pass drm_bridge_funcs to drm_bridge_init
drm/bridge: ptn3460: Few trivial cleanups
drm/panel: simple: Add AVIC TM070DDH03 panel support
of: Add vendor prefix for Shanghai AVIC Optoelectronics Co., Ltd.
drm/panel: sharp: lq101r1sx01: Remove unneeded include
drm/panel: sharp: lq101r1sx01: Respect power timings
drm/panel: sharp: lq101r1sx01: Add delay after display on
...
Mainly taking care of some register offsets, otherwise things are similar to
hsw. Also, programming ddi aux to use hardcoded values for psr data select.
v2: introduce EDP_PSR_AUX_BASE macro (Chris)
v3: Moving to HW tracking for SKL+ platforms, so activating source psr during
psr_enabling and then avoiding psr entries and exits for each frontbuffer
updates.
v4: Using SKL DDI AUX regs instead of changing PSR_AUX regs definition (Rodrigo)
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[danvet: Drop the hunks to short-circuit sw tracking: We'd need to
push this down one level, and I don't fully trust the test coverage
yet to do so. So much prefer we pick a whitelist approach for the
cases we know work correctly.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The core fix was applied in
commit a63b03e2d2
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Jan 6 10:29:35 2015 +0000
mutex: Always clear owner field upon mutex_unlock()
(note the absence of stable@ tag)
so we can now revert our band-aid commit 226e5ae9e5 for -next.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We have had %x and %u intermixed. Bring everything in line and
use %x
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
For example,
/sys/kernel/debug/dri/0/i915_hangcheck_info:
Hangcheck active, fires in 15887800ms
render ring:
seqno = -4059 [current -583]
action = 2
score = 0
ACTHD = 1ee8 [current 21f980]
max ACTHD = 0
v2: Include expiration ETA. Can anyone spot a problem?
v3: Convert for workqueued hangcheck (Mika)
v4: Print seqnos as unsigned ints (Ville)
v5: Print seqnos as hex (Chris)
Tested-By: PRC QA PRTS (Patch Regression Test System Contact: shuang.he@intel.com) (v2)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When run as a timer, i915_hangcheck_elapsed() must adhere to all the
rules of running in a softirq context. This is advantageous to us as we
want to minimise the risk that a driver bug will prevent us from
detecting a hung GPU. However, that is irrelevant if the driver bug
prevents us from resetting and recovering. Still it is prudent not to
rely on mutexes inside the checker, but given the coarseness of
dev->struct_mutex doing so is extremely hard.
Give in and run from a work queue, i.e. outside of softirq.
v2: Use own workqueue to avoid deadlocks (Daniel)
Cleanup commit msg and add comment to i915_queue_hangcheck() (Chris)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <dnaiel.vetter@ffwll.chm>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
[danvet: Remove accidental kerneldoc comment starter, to appease the 0
day builder.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
An interesting bug occurs on Pineview through which the root cause is
that the writes of the PTE values into the GTT is not serialised with
subsequent memory access through the GTT (when using WC updates of the
PTE values). This is despite there being a posting read after the GTT
update. However, by changing the address of the posting read, the memory
access is indeed serialised correctly.
Whilst we are manipulating the memory barriers, we can remove the
compiler :memory restraint on the intermediate PTE writes knowing that
we explicitly perform a posting read afterwards.
v2: Replace posting reads with explicit write memory barriers - in
particular this is advantages in case of single page objects. Update
comments to mention this issue is only with WC writes.
Testcase: igt/gem_exec_big #pnv
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88191
Tested-by: huax.lu@intel.com (v1)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Commit fbc4572e9c48e45b ("drm/bridge: make bridge registration independent of
drm flow") introduced some drm/bridge API modifications. Make the necessary
changes so that we can avoid the build breakage:
drivers/gpu/drm/bridge/dw_hdmi.c: In function 'dw_hdmi_bridge_destroy':
drivers/gpu/drm/bridge/dw_hdmi.c:1378:2: error: implicit declaration of function 'drm_bridge_cleanup' [-Werror=implicit-function-declaration]
drivers/gpu/drm/bridge/dw_hdmi.c: At top level:
drivers/gpu/drm/bridge/dw_hdmi.c:1471:2: error: unknown field 'destroy' specified in initializer
drivers/gpu/drm/bridge/dw_hdmi.c: In function 'dw_hdmi_register':
drivers/gpu/drm/bridge/dw_hdmi.c:1535:2: error: implicit declaration of function 'drm_bridge_init' [-Werror=implicit-function-declaration]
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
So sti doesn't build because the bridge interfaces changes didn't
catch up to its new DVO driver.
Now I might just carry this patch, but I might just push the
bridge pull into a side-pull until someone resolves it.
So this might not be the right solution to the problem, so
please figure it out and let me know ASAP.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
If devm_request_threaded_irq() fails we should jump to 'err_iahb' label that
will disable the clocks that were previously enabled.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When setting the video bus supported formats for a display device using
drm_display_info_set_bus_formats(), check for the proper variable after
duplicating memory.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Force bridge connector detection at the end of the bridge attach.
This is needed to detect the bridge connector early.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add drm_panel calls to the driver to make the panel and
bridge work together in tandem.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Rob Clark