FCF_ASYNC_SENT flag is used in session management. This flag is cleared in
task management path by accident. Remove unintended flag clearing.
Fixes: 388a49959e ("scsi: qla2xxx: Fix panic from use after free in qla2x00_async_tm_cmd")
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a login failed due to low FW resources, the session can stall and will
not be connected. Reset session state to allow relogin logic to redrive
the connection.
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In large environment, it is possible to experience command timeout and
escalation of path recovery. Currently the driver does not track the number
of exchanges/commands sent to FW. If there is a delay for commands at the
head of the queue, then this will create back pressure for commands at the
back of the queue.
Check for exchange availability before command submission.
Fixes: 89c72f4245 ("scsi: qla2xxx: Add IOCB resource tracking")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following message and call trace was seen with debug kernels:
DMA-API: qla2xxx 0000:41:00.0: device driver failed to check map
error [device address=0x00000002a3ff38d8] [size=1024 bytes] [mapped as
single]
WARNING: CPU: 0 PID: 2930 at kernel/dma/debug.c:1017
check_unmap+0xf42/0x1990
Call Trace:
debug_dma_unmap_page+0xc9/0x100
qla_nvme_ls_unmap+0x141/0x210 [qla2xxx]
Remove DMA mapping from the driver altogether, as it is already done by FC
layer. This prevents the warning.
Fixes: c85ab7d9e2 ("scsi: qla2xxx: Fix missed DMA unmap for NVMe ls requests")
Cc: stable@vger.kernel.org
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
User experienced symptoms of adapter failure in NPIV environment. NPIV
hosts were allowed to trigger chip reset back to back due to NPIV link
state being slow to come online.
Fix link failure in NPIV environment by removing NPIV host from directly
being able to perform chip reset.
kernel: qla2xxx [0000:04:00.1]-6009:261: Loop down - aborting ISP.
kernel: qla2xxx [0000:04:00.1]-6009:262: Loop down - aborting ISP.
kernel: qla2xxx [0000:04:00.1]-6009:281: Loop down - aborting ISP.
kernel: qla2xxx [0000:04:00.1]-6009:285: Loop down - aborting ISP
Fixes: 0d6e61bc6a ("[SCSI] qla2xxx: Correct various NPIV issues.")
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
CT Ping and ELS cmds fail for NVMe targets. Check if port is online before
sending ELS instead of sending login.
Cc: stable@vger.kernel.org
Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Grab the ATA port lock in sas_ata_device_link_abort() before calling
ata_link_abort() as outlined in this function's locking requirements.
Fixes: 4411292267 ("scsi: libsas: Add sas_ata_device_link_abort()")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The reserved tags were put in the lower region of the tagset in commit
f7d190a94e ("scsi: hisi_sas: Put reserved tags in lower region of
tagset"). However, only the allocate function was changed, freeing was not
handled. This resulted in a failure to boot:
[ 33.467345] hisi_sas_v3_hw 0000:b4:02.0: task exec: failed[-132]!
[ 33.473413] sas: Executing internal abort failed 5000000000000603 (-132)
[ 33.480088] hisi_sas_v3_hw 0000:b4:02.0: I_T nexus reset: internal abort (-132)
[ 33.657336] hisi_sas_v3_hw 0000:b4:02.0: task exec: failed[-132]!
[ 33.663403] ata7.00: failed to IDENTIFY (I/O error, err_mask=0x40)
[ 35.787344] hisi_sas_v3_hw 0000:b4:04.0: task exec: failed[-132]!
[ 35.793411] sas: Executing internal abort failed 5000000000000703 (-132)
[ 35.800084] hisi_sas_v3_hw 0000:b4:04.0: I_T nexus reset: internal abort (-132)
[ 35.977335] hisi_sas_v3_hw 0000:b4:04.0: task exec: failed[-132]!
[ 35.983403] ata10.00: failed to IDENTIFY (I/O error, err_mask=0x40)
[ 35.989643] ata10.00: revalidation failed (errno=-5)
Fixes: f7d190a94e ("scsi: hisi_sas: Put reserved tags in lower region of tagset")
Cc: John Garry <john.g.garry@oracle.com>
Cc: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Acked-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The boolean return value of the qc_fill_rtf operation is used nowhere.
Simplify this operation interface by making it a void function. All
drivers defining this operation are also updated.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
The name ATA_QCFLAG_FAILED is misleading since it does not mean that a
QC completed in error, or that it didn't complete at all. It means that
libata decided to schedule EH for the QC, so the QC is now owned by the
libata error handler (EH).
The normal execution path is responsible for not accessing a QC owned
by EH. libata core enforces the rule by returning NULL from
ata_qc_from_tag() for QCs owned by EH.
It is quite easy to mistake that a QC marked with ATA_QCFLAG_FAILED was
an error. However, a QC that was actually an error is instead indicated
by having qc->err_mask set. E.g. when we have a NCQ error, we abort all
QCs, which currently will mark all QCs as ATA_QCFLAG_FAILED. However, it
will only be a single QC that is an error (i.e. has qc->err_mask set).
Rename ATA_QCFLAG_FAILED to ATA_QCFLAG_EH to more clearly highlight that
this flag simply means that a QC is now owned by EH. This new name will
not mislead to think that the QC was an error (which is instead
indicated by having qc->err_mask set).
This also makes it more obvious that the EH code skips all QCs that do
not have ATA_QCFLAG_EH set (rather than ATA_QCFLAG_FAILED), since the EH
code should simply only care about QCs that are owned by EH itself.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Jason Yan <yanaijie@huawei.com> says:
A few coding style fixes and cleanups. There should be no functional
changes in this series besides the debug log prints.
Link: https://lore.kernel.org/r/20221214133808.1649122-1-yanaijie@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Factor out sas_ex_add_dev() to be consistent with sas_ata_add_dev() and
unify the error handling.
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Factor out sas_ata_add_dev() and put it in sas_ata.c since it is a SATA
related interface. Also follow the standard coding style to define an
inline empty function when CONFIG_SCSI_SAS_ATA is not enabled.
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The domain device 'child' is allocated in sas_ex_discover_end_dev() and
used to be added to the dev_list in this function. After the following two
fixes the device is added to the disco_list instead. As a result, the
list_del() and locking left behind is now redundant.
Fixes: 87c8331fcf ("[SCSI] libsas: prevent domain rediscovery competing with ata error handling")
Fixes: 92625f9bff ("[SCSI] libsas: restore scan order")
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The coding style where calling this interface is inconsistent with other
interfaces for SATA devices. The standard style for other SATA interfaces
is like:
#ifdefine CONFIG_SCSI_SAS_ATA
void sas_ata_task_abort(struct sas_task *task);
#else
static inline void sas_ata_task_abort(struct sas_task *task)
{
}
#endif
And the callers does not have to do things like "#ifdefine CONFIG_SCSI_SAS_ATA"
and may call the interface directly. So follow the standard style here.
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a sas_get_ata_command_set() declaration above sas_get_ata_info()
to make it compile. However, this function is defined in the same
file. Move it up to save the forward declaration.
Also remove the variable 'fis' which is not needed in this function.
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown". After a timer is set to this state, then it can no
longer be re-armed.
The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed. It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.
This was created by using a coccinelle script and the following
commands:
$ cat timer.cocci
@@
expression ptr, slab;
identifier timer, rfield;
@@
(
- del_timer(&ptr->timer);
+ timer_shutdown(&ptr->timer);
|
- del_timer_sync(&ptr->timer);
+ timer_shutdown_sync(&ptr->timer);
)
... when strict
when != ptr->timer
(
kfree_rcu(ptr, rfield);
|
kmem_cache_free(slab, ptr);
|
kfree(ptr);
)
$ spatch timer.cocci . > /tmp/t.patch
$ patch -p1 < /tmp/t.patch
Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mostly small bug fixes and small updates. The only things of note is
a qla2xxx fix for crash on hotplug and timeout and the addition of a
user exposed abstraction layer for persistent reservation error return
handling (which necessitates the conversion of nvme.c as well as
SCSI).
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY6SZISYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQkdAP9Juri0
ihkyA9tVx1ZslVOp8V8mWK3P2VROA4ArvcMRVwD/Qxf2REP8Fx2GIgC0sNaRedg3
+ncveg3EpZ1n/NXXeDw=
=q+XO
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes and small updates.
The only things of note is a qla2xxx fix for crash on hotplug and
timeout and the addition of a user exposed abstraction layer for
persistent reservation error return handling (which necessitates the
conversion of nvme.c as well as SCSI)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix crash when I/O abort times out
nvme: Convert NVMe errors to PR errors
scsi: sd: Convert SCSI errors to PR errors
scsi: core: Rename status_byte to sg_status_byte
block: Add error codes for common PR failures
scsi: sd: sd_zbc: Trace zone append emulation
scsi: libfc: Include the correct header
Since moving to memalloc_nofs_save/restore, SUNRPC has stopped setting the
GFP_NOIO flag on sk_allocation which the networking system uses to decide
when it is safe to use current->task_frag. The results of this are
unexpected corruption in task_frag when SUNRPC is involved in memory
reclaim.
The corruption can be seen in crashes, but the root cause is often
difficult to ascertain as a crashing machine's stack trace will have no
evidence of being near NFS or SUNRPC code. I believe this problem to
be much more pervasive than reports to the community may indicate.
Fix this by having kernel users of sockets that may corrupt task_frag due
to reclaim set sk_use_task_frag = false. Preemptively correcting this
situation for users that still set sk_allocation allows them to convert to
memalloc_nofs_save/restore without the same unexpected corruptions that are
sure to follow, unlikely to show up in testing, and difficult to bisect.
CC: Philipp Reisner <philipp.reisner@linbit.com>
CC: Lars Ellenberg <lars.ellenberg@linbit.com>
CC: "Christoph Böhmwalder" <christoph.boehmwalder@linbit.com>
CC: Jens Axboe <axboe@kernel.dk>
CC: Josef Bacik <josef@toxicpanda.com>
CC: Keith Busch <kbusch@kernel.org>
CC: Christoph Hellwig <hch@lst.de>
CC: Sagi Grimberg <sagi@grimberg.me>
CC: Lee Duncan <lduncan@suse.com>
CC: Chris Leech <cleech@redhat.com>
CC: Mike Christie <michael.christie@oracle.com>
CC: "James E.J. Bottomley" <jejb@linux.ibm.com>
CC: "Martin K. Petersen" <martin.petersen@oracle.com>
CC: Valentina Manea <valentina.manea.m@gmail.com>
CC: Shuah Khan <shuah@kernel.org>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: David Howells <dhowells@redhat.com>
CC: Marc Dionne <marc.dionne@auristor.com>
CC: Steve French <sfrench@samba.org>
CC: Christine Caulfield <ccaulfie@redhat.com>
CC: David Teigland <teigland@redhat.com>
CC: Mark Fasheh <mark@fasheh.com>
CC: Joel Becker <jlbec@evilplan.org>
CC: Joseph Qi <joseph.qi@linux.alibaba.com>
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: Dominique Martinet <asmadeus@codewreck.org>
CC: Ilya Dryomov <idryomov@gmail.com>
CC: Xiubo Li <xiubli@redhat.com>
CC: Chuck Lever <chuck.lever@oracle.com>
CC: Jeff Layton <jlayton@kernel.org>
CC: Trond Myklebust <trond.myklebust@hammerspace.com>
CC: Anna Schumaker <anna@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass in
a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be used
no matter what the const value is. This prevents every subsystem from
having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject, objects
as being "non-mutable". The changes to the kobject and driver core in
this pull request are the result of that, as there are lots of paths
where kobjects and device pointers are not modified at all, so marking
them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object rules.
All of this has been bike-shedded in quite a lot of detail on lkml with
different names and implementations resulting in the tiny version we
have in here, much better than my original proposal. Lots of subsystem
maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with no
problems, OTHER than some merge issues with other trees that should be
obvious when you hit them (block tree deletes a driver that this tree
modifies, iommufd tree modifies code that this tree also touches). If
there are merge problems with these trees, please let me know.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY5wz3A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yks0ACeKYUlVgCsER8eYW+x18szFa2QTXgAn2h/VhZe
1Fp53boFaQkGBjl8mGF8
=v+FB
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass
in a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be
used no matter what the const value is. This prevents every subsystem
from having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject,
objects as being "non-mutable". The changes to the kobject and driver
core in this pull request are the result of that, as there are lots of
paths where kobjects and device pointers are not modified at all, so
marking them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object
rules.
All of this has been bike-shedded in quite a lot of detail on lkml
with different names and implementations resulting in the tiny version
we have in here, much better than my original proposal. Lots of
subsystem maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with
no problems"
* tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits)
device property: Fix documentation for fwnode_get_next_parent()
firmware_loader: fix up to_fw_sysfs() to preserve const
usb.h: take advantage of container_of_const()
device.h: move kobj_to_dev() to use container_of_const()
container_of: add container_of_const() that preserves const-ness of the pointer
driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion.
driver core: fix up missed scsi/cxlflash class.devnode() conversion.
driver core: fix up some missing class.devnode() conversions.
driver core: make struct class.devnode() take a const *
driver core: make struct class.dev_uevent() take a const *
cacheinfo: Remove of_node_put() for fw_token
device property: Add a blank line in Kconfig of tests
device property: Rename goto label to be more precise
device property: Move PROPERTY_ENTRY_BOOL() a bit down
device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*()
kernfs: fix all kernel-doc warnings and multiple typos
driver core: pass a const * into of_device_uevent()
kobject: kset_uevent_ops: make name() callback take a const *
kobject: kset_uevent_ops: make filter() callback take a const *
kobject: make kobject_namespace take a const *
...
Since commit fc7a6209d5 ("bus: Make remove callback return void")
forces bus_type::remove be void-returned, it doesn't make much sense for
any bus based driver implementing remove callbalk to return non-void to
its caller.
This change is for xen bus based drivers.
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Link: https://lore.kernel.org/r/TYCP286MB23238119AB4DF190997075C9CAE39@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Juergen Gross <jgross@suse.com>
Updates to the usual drivers (target, ufs, smartpqi, lpfc). There are
some core changes, mostly around reworking some of our user context
assumptions in device put and moving some code around. The remaining
updates are bug fixes and minor changes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY5jjrSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishR9iAPwN++uF
BNlCD36duS8LslKQMPAmFxWt3d/4RWAHsXj2WQEAtu9q8K9PSe1ueb4y+rAEG4oj
2AUQhR3v9ciWBBKlDog=
=JYJC
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (target, ufs, smartpqi, lpfc).
There are some core changes, mostly around reworking some of our user
context assumptions in device put and moving some code around.
The remaining updates are bug fixes and minor changes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (138 commits)
scsi: sg: Fix get_user() in call sg_scsi_ioctl()
scsi: megaraid_sas: Fix some spelling mistakes in comment
scsi: core: Use SCSI_SCAN_INITIAL in do_scsi_scan_host()
scsi: core: Use SCSI_SCAN_RESCAN in __scsi_add_device()
scsi: ufs: ufs-mediatek: Remove unnecessary return code
scsi: ufs: core: Fix the polling implementation
scsi: libsas: Do not export sas_ata_wait_after_reset()
scsi: hisi_sas: Fix SATA devices missing issue during I_T nexus reset
scsi: libsas: Add smp_ata_check_ready_type()
scsi: Revert "scsi: hisi_sas: Don't send bcast events from HW during nexus HA reset"
scsi: Revert "scsi: hisi_sas: Drain bcast events in hisi_sas_rescan_topology()"
scsi: ufs: ufs-mediatek: Modify the return value
scsi: ufs: ufs-mediatek: Remove unneeded code
scsi: device_handler: alua: Call scsi_device_put() from non-atomic context
scsi: device_handler: alua: Revert "Move a scsi_device_put() call out of alua_check_vpd()"
scsi: snic: Fix possible UAF in snic_tgt_create()
scsi: qla2xxx: Initialize vha->unknown_atio_[list, work] for NPIV hosts
scsi: qla2xxx: Remove duplicate of vha->iocb_work initialization
scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails
scsi: sd: Use 16-byte SYNCHRONIZE CACHE on ZBC devices
...
The 2nd return statement in inquiry_vpd_b0() is unreachable, so delete it.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20221213142122.1011886-1-john.g.garry@oracle.com
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When Kconfig item CONFIG_SCSI_MPI3MR was introduced for mpi3mr driver, the
Makefile of the driver was not modified to refer the Kconfig item.
As a result, mpi3mr.ko is built regardless of the Kconfig item value y or
m. Also, if 'make localmodconfig' can not find the Kconfig item in the
Makefile, then it does not generate CONFIG_SCSI_MPI3MR=m even when
mpi3mr.ko is loaded on the system.
Refer to the Kconfig item to avoid the issues.
Fixes: c4f7ac6461 ("scsi: mpi3mr: Add mpi30 Rev-R headers and Kconfig")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20221207023659.2411785-1-shinichiro.kawasaki@wdc.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a host template doesn't implement the .eh_abort_handler() there is no
point in queueing the abort workqueue function; all it does is invoking
SCSI EH anyway. So return 'FAILED' from scsi_abort_command() if the
.eh_abort_handler() is not implemented and save us from having to wait for
the abort workqueue function to complete.
Cc: Niklas Cassel <niklas.cassel@wdc.com>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
[niklas: moved the check to the top of scsi_abort_command()]
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Link: https://lore.kernel.org/r/20221206131346.2045375-1-niklas.cassel@wdc.com
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
storvsc_queuecommand() maps the scatter/gather list using scsi_dma_map(),
which in a confidential VM allocates swiotlb bounce buffers. If the I/O
submission fails in storvsc_do_io(), the I/O is typically retried by higher
level code, but the bounce buffer memory is never freed. The mostly like
cause of I/O submission failure is a full VMBus channel ring buffer, which
is not uncommon under high I/O loads. Eventually enough bounce buffer
memory leaks that the confidential VM can't do any I/O. The same problem
can arise in a non-confidential VM with kernel boot parameter
swiotlb=force.
Fix this by doing scsi_dma_unmap() in the case of an I/O submission
error, which frees the bounce buffer memory.
Fixes: 743b237c3a ("scsi: storvsc: Add Isolation VM support for storvsc driver")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1670183564-76254-1-git-send-email-mikelley@microsoft.com
Tested-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It was observed that the kernel would potentially send
ISCSI_KEVENT_UNBIND_SESSION multiple times. Introduce 'target_state' in
iscsi_cls_session() to make sure session will send only one unbind session
event.
This introduces a regression wrt. the issue fixed in commit 13e60d3ba2
("scsi: iscsi: Report unbind session event when the target has been
removed"). If iscsid dies for any reason after sending an unbind session to
kernel, once iscsid is restarted, the kernel's ISCSI_KEVENT_UNBIND_SESSION
event is lost and userspace is then unable to logout. However, the session
is actually in invalid state (its target_id is INVALID) so iscsid should
not sync this session during restart.
Consequently we need to check the session's target state during iscsid
restart. If session is in unbound state, do not sync this session and
perform session teardown. This is OK because once a session is unbound, we
can not recover it any more (mainly because its target id is INVALID).
Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
Link: https://lore.kernel.org/r/20221126010752.231917-1-haowenchao@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ata changes fro 6.2 include the ususal set of driver fixes and
improvements as well as several patches improving libata core in
preparation of the introduction of the support for the command duration
limits feature. In more details:
- Define the missing COMPLETED sense key in scsi header (from me).
- Several patches to improve libata handling of the status of
completed commands and the retry and sense data reported to the scsi
layer for failed commands. In particular, this widen the support for
NCQ autosense to all drives that support this feature instead of
restricting this feature use to ZAC drives only (from Niklas).
- Cleanup of the pata_mpc52xx and sata_dwc_460ex drivers to remove the
use of the deprecated NO_IRQ macro (from Christophe).
- Fix build dedependency on OF vs use of the of_match_ptr() macro to
avoid build errors with the sata_gemini and pata_ftide010 drivers
(from me).
- Some libata cleanups using the new helper function
ata_port_is_frozen() (from Niklas).
- Improve internal command handling by not retrying commands that
failed with a timeout (from Niklas).
- Remove code for several unused libata helper functions (from
Niklas).
- Remove the palmchip pata_bk3710 driver. A couple of other driver
removal should come in through the arm tree pull request (from
Arnd).
- Remove unused variable and function in the sata_dwc_460ex driver and
libata-sff code (from Colin and Sergey).
- Minor cleanup of the pata_ep93xx driver platform code (from
Minghao).
- Remove the unnecessary linux/msi.h include from the ahci driver
(from Thomas).
- Changes to libata enum constants definitions to avoid warnings with
gcc-13 (from Arnd).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCY5aregAKCRDdoc3SxdoY
dlfSAQCeTLQP9qBrmSUZnP5G5XOHHcxp5maXKWBrPFVsOhTmLQD/WxEGDzgEnnPe
m8hKvBcqTQIn2QRGCiXRnYAiG9Om0Qo=
=bJZM
-----END PGP SIGNATURE-----
Merge tag 'ata-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata updates from Damien Le Moal:
"The ususal set of driver fixes and improvements as well as several
patches improving libata core in preparation of the introduction of
the support for the command duration limits feature. In more details:
- Define the missing COMPLETED sense key in scsi header (me)
- Several patches to improve libata handling of the status of
completed commands and the retry and sense data reported to the
scsi layer for failed commands. In particular, this widen the
support for NCQ autosense to all drives that support this feature
instead of restricting this feature use to ZAC drives only (Niklas)
- Cleanup of the pata_mpc52xx and sata_dwc_460ex drivers to remove
the use of the deprecated NO_IRQ macro (Christophe)
- Fix build dedependency on OF vs use of the of_match_ptr() macro to
avoid build errors with the sata_gemini and pata_ftide010 drivers
(me)
- Some libata cleanups using the new helper function
ata_port_is_frozen() (Niklas)
- Improve internal command handling by not retrying commands that
failed with a timeout (Niklas)
- Remove code for several unused libata helper functions (from
Niklas)
- Remove the palmchip pata_bk3710 driver. A couple of other driver
removal should come in through the arm tree pull request (from
Arnd)
- Remove unused variable and function in the sata_dwc_460ex driver
and libata-sff code (Colin and Sergey)
- Minor cleanup of the pata_ep93xx driver platform code (from
Minghao)
- Remove the unnecessary linux/msi.h include from the ahci driver
(Thomas)
- Changes to libata enum constants definitions to avoid warnings with
gcc-13 (Arnd)"
* tag 'ata-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (24 commits)
ata: ahci: fix enum constants for gcc-13
ata: libata: fix commands incorrectly not getting retried during NCQ error
ata: ahci: Remove linux/msi.h include
ata: sata_dwc_460ex: Check !irq instead of irq == NO_IRQ
ata: pata_ep93xx: use devm_platform_get_and_ioremap_resource()
ata: libata-sff: kill unused ata_sff_busy_sleep()
ata: sata_dwc_460ex: remove variable num_processed
ata: remove palmchip pata_bk3710 driver
ata: remove unused helper ata_id_flush_ext_enabled()
ata: remove unused helper ata_id_flush_enabled()
ata: remove unused helper ata_id_lba48_enabled()
ata: libata-core: do not retry reading the log on timeout
scsi: libsas: make use of ata_port_is_frozen() helper
ata: make use of ata_port_is_frozen() helper
ata: add ata_port_is_frozen() helper
ata: pata_ftide010: Remove build dependency on OF
ata: sata_gemini: Remove dependency on OF for compile tests
ata: pata_mpc52xx: Replace NO_IRQ with 0
ata: libahci: read correct status and error field for NCQ commands
ata: libata: fetch sense data for ATA devices supporting sense reporting
...
-----BEGIN PGP SIGNATURE-----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=k/vv
-----END PGP SIGNATURE-----
Merge tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull requests via Christoph:
- Support some passthrough commands without CAP_SYS_ADMIN (Kanchan
Joshi)
- Refactor PCIe probing and reset (Christoph Hellwig)
- Various fabrics authentication fixes and improvements (Sagi
Grimberg)
- Avoid fallback to sequential scan due to transient issues (Uday
Shankar)
- Implement support for the DEAC bit in Write Zeroes (Christoph
Hellwig)
- Allow overriding the IEEE OUI and firmware revision in configfs
for nvmet (Aleksandr Miloserdov)
- Force reconnect when number of queue changes in nvmet (Daniel
Wagner)
- Minor fixes and improvements (Uros Bizjak, Joel Granados, Sagi
Grimberg, Christoph Hellwig, Christophe JAILLET)
- Fix and cleanup nvme-fc req allocation (Chaitanya Kulkarni)
- Use the common tagset helpers in nvme-pci driver (Christoph
Hellwig)
- Cleanup the nvme-pci removal path (Christoph Hellwig)
- Use kstrtobool() instead of strtobool (Christophe JAILLET)
- Allow unprivileged passthrough of Identify Controller (Joel
Granados)
- Support io stats on the mpath device (Sagi Grimberg)
- Minor nvmet cleanup (Sagi Grimberg)
- MD pull requests via Song:
- Code cleanups (Christoph)
- Various fixes
- Floppy pull request from Denis:
- Fix a memory leak in the init error path (Yuan)
- Series fixing some batch wakeup issues with sbitmap (Gabriel)
- Removal of the pktcdvd driver that was deprecated more than 5 years
ago, and subsequent removal of the devnode callback in struct
block_device_operations as no users are now left (Greg)
- Fix for partition read on an exclusively opened bdev (Jan)
- Series of elevator API cleanups (Jinlong, Christoph)
- Series of fixes and cleanups for blk-iocost (Kemeng)
- Series of fixes and cleanups for blk-throttle (Kemeng)
- Series adding concurrent support for sync queues in BFQ (Yu)
- Series bringing drbd a bit closer to the out-of-tree maintained
version (Christian, Joel, Lars, Philipp)
- Misc drbd fixes (Wang)
- blk-wbt fixes and tweaks for enable/disable (Yu)
- Fixes for mq-deadline for zoned devices (Damien)
- Add support for read-only and offline zones for null_blk
(Shin'ichiro)
- Series fixing the delayed holder tracking, as used by DM (Yu,
Christoph)
- Series enabling bio alloc caching for IRQ based IO (Pavel)
- Series enabling userspace peer-to-peer DMA (Logan)
- BFQ waker fixes (Khazhismel)
- Series fixing elevator refcount issues (Christoph, Jinlong)
- Series cleaning up references around queue destruction (Christoph)
- Series doing quiesce by tagset, enabling cleanups in drivers
(Christoph, Chao)
- Series untangling the queue kobject and queue references (Christoph)
- Misc fixes and cleanups (Bart, David, Dawei, Jinlong, Kemeng, Ye,
Yang, Waiman, Shin'ichiro, Randy, Pankaj, Christoph)
* tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux: (247 commits)
blktrace: Fix output non-blktrace event when blk_classic option enabled
block: sed-opal: Don't include <linux/kernel.h>
sed-opal: allow using IOC_OPAL_SAVE for locking too
blk-cgroup: Fix typo in comment
block: remove bio_set_op_attrs
nvmet: don't open-code NVME_NS_ATTR_RO enumeration
nvme-pci: use the tagset alloc/free helpers
nvme: add the Apple shared tag workaround to nvme_alloc_io_tag_set
nvme: only set reserved_tags in nvme_alloc_io_tag_set for fabrics controllers
nvme: consolidate setting the tagset flags
nvme: pass nr_maps explicitly to nvme_alloc_io_tag_set
block: bio_copy_data_iter
nvme-pci: split out a nvme_pci_ctrl_is_dead helper
nvme-pci: return early on ctrl state mismatch in nvme_reset_work
nvme-pci: rename nvme_disable_io_queues
nvme-pci: cleanup nvme_suspend_queue
nvme-pci: remove nvme_pci_disable
nvme-pci: remove nvme_disable_admin_queue
nvme: merge nvme_shutdown_ctrl into nvme_disable_ctrl
nvme: use nvme_wait_ready in nvme_shutdown_ctrl
...
direction misannotations and (hopefully) preventing
more of the same for the future.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCY5ZzQAAKCRBZ7Krx/gZQ
65RZAP4nTkvOn0NZLVFkuGOx8pgJelXAvrteyAuecVL8V6CR4AD40qCVY51PJp8N
MzwiRTeqnGDxTTF7mgd//IB6hoatAA==
=bcvF
-----END PGP SIGNATURE-----
Merge tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"iov_iter work; most of that is about getting rid of direction
misannotations and (hopefully) preventing more of the same for the
future"
* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
use less confusing names for iov_iter direction initializers
iov_iter: saner checks for attempt to copy to/from iterator
[xen] fix "direction" argument of iov_iter_kvec()
[vhost] fix 'direction' argument of iov_iter_{init,bvec}()
[target] fix iov_iter_bvec() "direction" argument
[s390] memcpy_real(): WRITE is "data source", not destination...
[s390] zcore: WRITE is "data source", not destination...
[infiniband] READ is "data destination", not source...
[fsi] WRITE is "data source", not destination...
[s390] copy_oldmem_kernel() - WRITE is "data source", not destination
csum_and_copy_to_iter(): handle ITER_DISCARD
get rid of unlikely() on page_copy_sane() calls
-----BEGIN PGP SIGNATURE-----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=QRhK
-----END PGP SIGNATURE-----
Merge tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Replace prandom_u32_max() and various open-coded variants of it,
there is now a new family of functions that uses fast rejection
sampling to choose properly uniformly random numbers within an
interval:
get_random_u32_below(ceil) - [0, ceil)
get_random_u32_above(floor) - (floor, U32_MAX]
get_random_u32_inclusive(floor, ceil) - [floor, ceil]
Coccinelle was used to convert all current users of
prandom_u32_max(), as well as many open-coded patterns, resulting in
improvements throughout the tree.
I'll have a "late" 6.1-rc1 pull for you that removes the now unused
prandom_u32_max() function, just in case any other trees add a new
use case of it that needs to converted. According to linux-next,
there may be two trivial cases of prandom_u32_max() reintroductions
that are fixable with a 's/.../.../'. So I'll have for you a final
conversion patch doing that alongside the removal patch during the
second week.
This is a treewide change that touches many files throughout.
- More consistent use of get_random_canary().
- Updates to comments, documentation, tests, headers, and
simplification in configuration.
- The arch_get_random*_early() abstraction was only used by arm64 and
wasn't entirely useful, so this has been replaced by code that works
in all relevant contexts.
- The kernel will use and manage random seeds in non-volatile EFI
variables, refreshing a variable with a fresh seed when the RNG is
initialized. The RNG GUID namespace is then hidden from efivarfs to
prevent accidental leakage.
These changes are split into random.c infrastructure code used in the
EFI subsystem, in this pull request, and related support inside of
EFISTUB, in Ard's EFI tree. These are co-dependent for full
functionality, but the order of merging doesn't matter.
- Part of the infrastructure added for the EFI support is also used for
an improvement to the way vsprintf initializes its siphash key,
replacing an sleep loop wart.
- The hardware RNG framework now always calls its correct random.c
input function, add_hwgenerator_randomness(), rather than sometimes
going through helpers better suited for other cases.
- The add_latent_entropy() function has long been called from the fork
handler, but is a no-op when the latent entropy gcc plugin isn't
used, which is fine for the purposes of latent entropy.
But it was missing out on the cycle counter that was also being mixed
in beside the latent entropy variable. So now, if the latent entropy
gcc plugin isn't enabled, add_latent_entropy() will expand to a call
to add_device_randomness(NULL, 0), which adds a cycle counter,
without the absent latent entropy variable.
- The RNG is now reseeded from a delayed worker, rather than on demand
when used. Always running from a worker allows it to make use of the
CPU RNG on platforms like S390x, whose instructions are too slow to
do so from interrupts. It also has the effect of adding in new inputs
more frequently with more regularity, amounting to a long term
transcript of random values. Plus, it helps a bit with the upcoming
vDSO implementation (which isn't yet ready for 6.2).
- The jitter entropy algorithm now tries to execute on many different
CPUs, round-robining, in hopes of hitting even more memory latencies
and other unpredictable effects. It also will mix in a cycle counter
when the entropy timer fires, in addition to being mixed in from the
main loop, to account more explicitly for fluctuations in that timer
firing. And the state it touches is now kept within the same cache
line, so that it's assured that the different execution contexts will
cause latencies.
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
random: include <linux/once.h> in the right header
random: align entropy_timer_state to cache line
random: mix in cycle counter when jitter timer fires
random: spread out jitter callback to different CPUs
random: remove extraneous period and add a missing one in comments
efi: random: refresh non-volatile random seed when RNG is initialized
vsprintf: initialize siphash key using notifier
random: add back async readiness notifier
random: reseed in delayed work rather than on-demand
random: always mix cycle counter in add_latent_entropy()
hw_random: use add_hwgenerator_randomness() for early entropy
random: modernize documentation comment on get_random_bytes()
random: adjust comment to account for removed function
random: remove early archrandom abstraction
random: use random.trust_{bootloader,cpu} command line option only
stackprotector: actually use get_random_canary()
stackprotector: move get_random_canary() into stackprotector.h
treewide: use get_random_u32_inclusive() when possible
treewide: use get_random_u32_{above,below}() instead of manual loop
treewide: use get_random_u32_below() instead of deprecated function
...
This pull request contains the following branches:
doc.2022.10.20a: Documentation updates. This is the second
in a series from an ongoing review of the RCU documentation.
fixes.2022.10.21a: Miscellaneous fixes.
lazy.2022.11.30a: Introduces a default-off Kconfig option that depends
on RCU_NOCB_CPU that, on CPUs mentioned in the nohz_full or
rcu_nocbs boot-argument CPU lists, causes call_rcu() to introduce
delays. These delays result in significant power savings on
nearly idle Android and ChromeOS systems. These savings range
from a few percent to more than ten percent.
This series also includes several commits that change call_rcu()
to a new call_rcu_hurry() function that avoids these delays in
a few cases, for example, where timely wakeups are required.
Several of these are outside of RCU and thus have acks and
reviews from the relevant maintainers.
srcunmisafe.2022.11.09a: Creates an srcu_read_lock_nmisafe() and an
srcu_read_unlock_nmisafe() for architectures that support NMIs,
but which do not provide NMI-safe this_cpu_inc(). These NMI-safe
SRCU functions are required by the upcoming lockless printk()
work by John Ogness et al.
That printk() series depends on these commits, so if you pull
the printk() series before this one, you will have already
pulled in this branch, plus two more SRCU commits:
0cd7e350ab ("rcu: Make SRCU mandatory")
51f5f78a4f ("srcu: Make Tiny synchronize_srcu() check for readers")
These two commits appear to work well, but do not have
sufficient testing exposure over a long enough time for me to
feel comfortable pushing them unless something in mainline is
definitely going to use them immediately, and currently only
the new printk() work uses them.
torture.2022.10.18c: Changes providing minor but important increases
in test coverage for the new RCU polled-grace-period APIs.
torturescript.2022.10.20a: Changes that avoid redundant kernel builds,
thus providing about a 30% speedup for the torture.sh acceptance
test.
-----BEGIN PGP SIGNATURE-----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=eMOr
-----END PGP SIGNATURE-----
Merge tag 'rcu.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates. This is the second in a series from an ongoing
review of the RCU documentation.
- Miscellaneous fixes.
- Introduce a default-off Kconfig option that depends on RCU_NOCB_CPU
that, on CPUs mentioned in the nohz_full or rcu_nocbs boot-argument
CPU lists, causes call_rcu() to introduce delays.
These delays result in significant power savings on nearly idle
Android and ChromeOS systems. These savings range from a few percent
to more than ten percent.
This series also includes several commits that change call_rcu() to a
new call_rcu_hurry() function that avoids these delays in a few
cases, for example, where timely wakeups are required. Several of
these are outside of RCU and thus have acks and reviews from the
relevant maintainers.
- Create an srcu_read_lock_nmisafe() and an srcu_read_unlock_nmisafe()
for architectures that support NMIs, but which do not provide
NMI-safe this_cpu_inc(). These NMI-safe SRCU functions are required
by the upcoming lockless printk() work by John Ogness et al.
- Changes providing minor but important increases in torture test
coverage for the new RCU polled-grace-period APIs.
- Changes to torturescript that avoid redundant kernel builds, thus
providing about a 30% speedup for the torture.sh acceptance test.
* tag 'rcu.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (49 commits)
net: devinet: Reduce refcount before grace period
net: Use call_rcu_hurry() for dst_release()
workqueue: Make queue_rcu_work() use call_rcu_hurry()
percpu-refcount: Use call_rcu_hurry() for atomic switch
scsi/scsi_error: Use call_rcu_hurry() instead of call_rcu()
rcu/rcutorture: Use call_rcu_hurry() where needed
rcu/rcuscale: Use call_rcu_hurry() for async reader test
rcu/sync: Use call_rcu_hurry() instead of call_rcu
rcuscale: Add laziness and kfree tests
rcu: Shrinker for lazy rcu
rcu: Refactor code a bit in rcu_nocb_do_flush_bypass()
rcu: Make call_rcu() lazy to save power
rcu: Implement lockdep_rcu_enabled for !CONFIG_DEBUG_LOCK_ALLOC
srcu: Debug NMI safety even on archs that don't require it
srcu: Explain the reason behind the read side critical section on GP start
srcu: Warn when NMI-unsafe API is used in NMI
arch/s390: Add ARCH_HAS_NMI_SAFE_THIS_CPU_OPS Kconfig option
arch/loongarch: Add ARCH_HAS_NMI_SAFE_THIS_CPU_OPS Kconfig option
rcu: Fix __this_cpu_read() lockdep warning in rcu_force_quiescent_state()
rcu-tasks: Make grace-period-age message human-readable
...
While performing CPU hotplug, a crash with the following stack was seen:
Call Trace:
qla24xx_process_response_queue+0x42a/0x970 [qla2xxx]
qla2x00_start_nvme_mq+0x3a2/0x4b0 [qla2xxx]
qla_nvme_post_cmd+0x166/0x240 [qla2xxx]
nvme_fc_start_fcp_op.part.0+0x119/0x2e0 [nvme_fc]
blk_mq_dispatch_rq_list+0x17b/0x610
__blk_mq_sched_dispatch_requests+0xb0/0x140
blk_mq_sched_dispatch_requests+0x30/0x60
__blk_mq_run_hw_queue+0x35/0x90
__blk_mq_delay_run_hw_queue+0x161/0x180
blk_execute_rq+0xbe/0x160
__nvme_submit_sync_cmd+0x16f/0x220 [nvme_core]
nvmf_connect_admin_queue+0x11a/0x170 [nvme_fabrics]
nvme_fc_create_association.cold+0x50/0x3dc [nvme_fc]
nvme_fc_connect_ctrl_work+0x19/0x30 [nvme_fc]
process_one_work+0x1e8/0x3c0
On abort timeout, completion was called without checking if the I/O was
already completed.
Verify that I/O and abort request are indeed outstanding before attempting
completion.
Fixes: 71c80b75ce ("scsi: qla2xxx: Do command completion on abort timeout")
Reported-by: Marco Patalano <mpatalan@redhat.com>
Tested-by: Marco Patalano <mpatalan@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20221129092634.15347-1-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This converts the SCSI errors we commonly see during PR handling to PR_STS
errors or -Exyz errors. pr_ops callers can then handle SCSI and NVMe errors
without knowing the device types.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20221122032603.32766-4-michael.christie@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The next patch adds a helper status_byte function that works like
host_byte, so this patch renames the old status_byte to sg_status_byte
since it's only used for SG IO.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20221122032603.32766-3-michael.christie@oracle.com
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add tracepoints to the SCSI zone append emulation in order to trace the
zone start to write-pointer aligned LBA translation and the corresponding
completion.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/d103bcf5f90139143469f2a0084c74bd9e03ad4a.1669804487.git.johannes.thumshirn@wdc.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This file does not use rcu, so there is no point in including
<linux/rculist.h>.
The dependency has been removed in commit fa519f701d ("scsi: libfc: fixup
'sleeping function called from invalid context'") It turned a
list_for_each_entry_rcu() into a list_for_each_entry().
So just #include <linux/list.h> now.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/960f34418358f0c35e645aa2cf7e0ec7fe6b60b9.1669461197.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Earlier commits in this series allow battery-powered systems to build
their kernels with the default-disabled CONFIG_RCU_LAZY=y Kconfig option.
This Kconfig option causes call_rcu() to delay its callbacks in order
to batch them. This means that a given RCU grace period covers more
callbacks, thus reducing the number of grace periods, in turn reducing
the amount of energy consumed, which increases battery lifetime which
can be a very good thing. This is not a subtle effect: In some important
use cases, the battery lifetime is increased by more than 10%.
This CONFIG_RCU_LAZY=y option is available only for CPUs that offload
callbacks, for example, CPUs mentioned in the rcu_nocbs kernel boot
parameter passed to kernels built with CONFIG_RCU_NOCB_CPU=y.
Delaying callbacks is normally not a problem because most callbacks do
nothing but free memory. If the system is short on memory, a shrinker
will kick all currently queued lazy callbacks out of their laziness,
thus freeing their memory in short order. Similarly, the rcu_barrier()
function, which blocks until all currently queued callbacks are invoked,
will also kick lazy callbacks, thus enabling rcu_barrier() to complete
in a timely manner.
However, there are some cases where laziness is not a good option.
For example, synchronize_rcu() invokes call_rcu(), and blocks until
the newly queued callback is invoked. It would not be a good for
synchronize_rcu() to block for ten seconds, even on an idle system.
Therefore, synchronize_rcu() invokes call_rcu_hurry() instead of
call_rcu(). The arrival of a non-lazy call_rcu_hurry() callback on a
given CPU kicks any lazy callbacks that might be already queued on that
CPU. After all, if there is going to be a grace period, all callbacks
might as well get full benefit from it.
Yes, this could be done the other way around by creating a
call_rcu_lazy(), but earlier experience with this approach and
feedback at the 2022 Linux Plumbers Conference shifted the approach
to call_rcu() being lazy with call_rcu_hurry() for the few places
where laziness is inappropriate.
And another call_rcu() instance that cannot be lazy is the one in the
scsi_eh_scmd_add() function. Leaving this instance lazy results in
unacceptably slow boot times.
Therefore, make scsi_eh_scmd_add() use call_rcu_hurry() in order to
revert to the old behavior.
[ paulmck: Apply s/call_rcu_flush/call_rcu_hurry/ feedback from Tejun Heo. ]
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: <linux-scsi@vger.kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
get_user() expects the pointer to be pointer-to-simple-variable type, but
sic->data is array of 'unsigned char'. It violates get_user() contracts.
Explicitly take pointer to the first element of the array. It matches
current behaviour.
This is preparation for fixing sparse warnings caused by Linear Address
Masking patchset.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20221117232304.1544-1-kirill.shutemov@linux.intel.com
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of using hardcoded '0' as the do_scsi_scan_host() ->
scsi_scan_host_selected() rescan arg, use proper macro SCSI_SCAN_INITIAL.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20221121121725.1910795-3-john.g.garry@oracle.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of using hardcoded '1' as the __scsi_add_device() ->
scsi_probe_and_add_lun() rescan arg, use proper macro SCSI_SCAN_RESCAN.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20221121121725.1910795-2-john.g.garry@oracle.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
sas_ata_wait_after_reset() does not need to be exported since it is no
longer referenced outside libsas.
Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com>
Link: https://lore.kernel.org/r/20221118083714.4034612-6-zhanjie9@hisilicon.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
SATA devices on an expander may be removed and not be found again when I_T
nexus reset and revalidation are processed simultaneously.
The issue comes from:
- Revalidation can remove SATA devices in link reset, e.g. in
hisi_sas_clear_nexus_ha().
- However, hisi_sas_debug_I_T_nexus_reset() polls the state of a SATA
device on an expander after sending link_reset, where it calls:
hisi_sas_debug_I_T_nexus_reset
sas_ata_wait_after_reset
ata_wait_after_reset
ata_wait_ready
smp_ata_check_ready
sas_ex_phy_discover
sas_ex_phy_discover_helper
sas_set_ex_phy
The ex_phy's change count is updated in sas_set_ex_phy(), so SATA
devices after a link reset may not be found later through revalidation.
A similar issue was reported in:
commit 0f3fce5cc7 ("[SCSI] libsas: fix ata_eh clobbering ex_phys via
smp_ata_check_ready")
commit 87c8331fcf ("[SCSI] libsas: prevent domain rediscovery competing
with ata error handling").
To address this issue, in hisi_sas_debug_I_T_nexus_reset(), we now call
smp_ata_check_ready_type() that only polls the device type while not
updating the ex_phy's data of libsas.
Fixes: 71453bd9d1 ("scsi: hisi_sas: Use sas_ata_wait_after_reset() in IT nexus reset")
Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com>
Link: https://lore.kernel.org/r/20221118083714.4034612-5-zhanjie9@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Create function smp_ata_check_ready_type() for LLDDs to wait for SATA
devices to come up after a link reset.
Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com>
Link: https://lore.kernel.org/r/20221118083714.4034612-4-zhanjie9@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This reverts commit f5f2a27160.
This is now unnecessary to solve the SATA devices missing issue in
hisi_sas_clear_nexus_ha(). Hence, we should not ignore bcast events during
sas_eh_handle_sas_errors() in case of missing bcast events, unless a
justified need is found and a mechanism to defer (but not ignore) bcast
events in sas_eh_handle_sas_errors() is provided.
Also, in hisi_sas_clear_nexus_ha(), there is nothing further to handle in
"out: " other than return, so that part can be reverted.
Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com>
Link: https://lore.kernel.org/r/20221118083714.4034612-3-zhanjie9@hisilicon.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This reverts commit 11ff0c98fc.
Draining or flushing events in hisi_sas_rescan_topology() can hang the
driver, typically with phy up or phy down events being processed,
i.e. sas_porte_bytes_dmaed() or sas_phye_loss_of_signal().
Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com>
Link: https://lore.kernel.org/r/20221118083714.4034612-2-zhanjie9@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since commit f93ed747e2 ("scsi: core: Release SCSI devices
synchronously"), scsi_device_put() might sleep. Avoid calling it from
alua_rtpg_queue() with the pg_lock held. The lock only pretects h->pg,
anyway. To avoid the pg being freed under us, because of a race with
another thread, take a temporary reference. In alua_rtpg_queue(), verify
that the pg still belongs to the sdev being passed before actually queueing
the RTPG.
This patch fixes the following smatch warning:
drivers/scsi/device_handler/scsi_dh_alua.c:1013 alua_rtpg_queue() warn: sleeping in atomic context
alua_check_vpd() <- disables preempt
-> alua_rtpg_queue()
-> scsi_device_put()
Cc: Martin Wilck <mwilck@suse.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sachin Sant <sachinp@linux.ibm.com>
Cc: Benjamin Block <bblock@linux.ibm.com>
Suggested-by: Martin Wilck <mwilck@suse.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221117183626.2656196-3-bvanassche@acm.org
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a bug in commit 0b25e17e90 ("scsi: alua: Move a
scsi_device_put() call out of alua_check_vpd()"): that patch may cause
alua_rtpg_queue() callers to call scsi_device_put() even if that function
should not be called. Revert that commit to prepare for a different
solution.
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Sachin Sant <sachinp@linux.ibm.com>
Cc: Benjamin Block <bblock@linux.ibm.com>
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Reported-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221117183626.2656196-2-bvanassche@acm.org
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Smatch reports a warning as follows:
drivers/scsi/snic/snic_disc.c:307 snic_tgt_create() warn:
'&tgt->list' not removed from list
If device_add() fails in snic_tgt_create(), tgt will be freed, but
tgt->list will not be removed from snic->disc.tgt_list, then list traversal
may cause UAF.
Remove from snic->disc.tgt_list before free().
Fixes: c8806b6c9e ("snic: driver for Cisco SCSI HBA")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221117035100.2944812-1-cuigaosheng1@huawei.com
Acked-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Initialization of vha->unknown_atio_list and vha->unknown_atio_work only
happens for base_vha in qlt_probe_one_stage1(). But there is no
initialization for NPIV hosts that are created in qla24xx_vport_create().
This causes a crash when trying to access these NPIV host fields.
Fix this by adding initialization to qla_vport_create().
Signed-off-by: Gleb Chesnokov <gleb.chesnokov@scst.dev>
Link: https://lore.kernel.org/r/376c89a2-a9ac-bcf9-bf0f-dfe89a02fd4b@scst.dev
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 9b3e0f4d41 ("scsi: qla2xxx: Move work element processing out of
DPC thread") introduced the initialization of vha->iocb_work in
qla2x00_create_host() function.
This initialization is also called from qla2x00_probe_one() function, just
after qla2x00_create_host().
Hence remove this duplicate call since it has already been called before.
Signed-off-by: Gleb Chesnokov <gleb.chesnokov@scst.dev>
Link: https://lore.kernel.org/r/822b3823-f344-67d6-30f1-16e31cf68eed@scst.dev
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
fcoe_init() calls fcoe_transport_attach(&fcoe_sw_transport), but when
fcoe_if_init() fails, &fcoe_sw_transport is not detached and leaves freed
&fcoe_sw_transport on fcoe_transports list. This causes panic when
reinserting module.
BUG: unable to handle page fault for address: fffffbfff82e2213
RIP: 0010:fcoe_transport_attach+0xe1/0x230 [libfcoe]
Call Trace:
<TASK>
do_one_initcall+0xd0/0x4e0
load_module+0x5eee/0x7210
...
Fixes: 78a582463c ("[SCSI] fcoe: convert fcoe.ko to become an fcoe transport provider driver")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221115092442.133088-1-chenzhongjin@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ZBC Zoned Block Commands specification mandates SYNCHRONIZE CACHE(16) for
host-managed zoned block devices, but does not mandate SYNCHRONIZE
CACHE(10). Call SYNCHRONIZE CACHE(16) in place of SYNCHRONIZE CACHE(10) to
ensure that the command is always supported. For this purpose, add
use_16_for_sync flag to struct scsi_device in same manner as use_16_for_rw
flag.
To be precise, ZBC does not mandate SYNCHRONIZE CACHE(16) for host-aware
zoned block devices. However, modern devices should support 16-byte
commands. Hence, call SYNCHRONIZE CACHE (16) on both types of ZBC devices,
host-aware and host-managed. Of note is that READ(16) and WRITE(16) have
same story and they are already called for both types of ZBC devices.
Another note is that this patch depends on the fix commit ea045fd344
("ata: libata-scsi: fix SYNCHRONIZE CACHE (16) command failure").
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20221115002905.1709006-1-shinichiro.kawasaki@wdc.com
Reviewed-by: Damien Le Moal <damien.lemoal@opendource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Afer commit 1fa5ae857b ("driver core: get rid of struct device's bus_id
string array"), the name of device is allocated dynamically, it needs be
freed when device_register() returns error.
As comment of device_register() says, one should use put_device() to give
up the reference in the error path. Fix this by calling put_device(), then
the name can be freed in kobject_cleanup(), and sdbg_host is freed in
sdebug_release_adapter().
When the device release is not set, it means the device is not initialized.
We can not call put_device() in this case. Use kfree() to free memory.
Fixes: 1fa5ae857b ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221112131010.3757845-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If device_register() returns an error, the name allocated by dev_set_name()
needs to be freed. As the comment of device_register() says, one should use
put_device() to give up the reference in the error path. Fix this by
calling put_device(), then the name can be freed in kobject_cleanup().
The 'fcf' is freed in fcoe_fcf_device_release(), so the kfree() in the
error path can be removed.
The 'ctlr' is freed in fcoe_ctlr_device_release(), so don't use the error
label, just return NULL after calling put_device().
Fixes: 9a74e884ee ("[SCSI] libfcoe: Add fcoe_sysfs")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221112094310.3633291-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As 'alloc_len' is user controlled data, if user tries to allocate memory
larger than(>=) MAX_ORDER, then kcalloc() will fail, it creates a stack
trace and messes up dmesg with a warning.
Add __GFP_NOWARN in order to avoid too large allocation warning. This is
detected by static analysis using smatch.
Fixes: 7db0e0c819 ("scsi: scsi_debug: Fix buffer size of REPORT ZONES command")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221112070612.2121535-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As 'vnum' is controlled by user, so if user tries to allocate memory larger
than(>=) MAX_ORDER, then kcalloc() will fail, it creates a stack trace and
messes up dmesg with a warning.
Add __GFP_NOWARN in order to avoid too large allocation warning. This is
detected by static analysis using smatch.
Fixes: c3e2fe9222 ("scsi: scsi_debug: Implement VERIFY(10), add VERIFY(16)")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221112070031.2121068-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If hpsa_sas_port_add_rphy() returns an error, the 'rphy' allocated in
sas_end_device_alloc() needs to be freed. Address this by calling
sas_rphy_free() in the error path.
Fixes: d04e62b9d6 ("hpsa: add in sas transport class")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221111043012.1074466-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
hpsa_sas_port_add_phy() does:
...
sas_phy_add() -> may return error here
sas_port_add_phy()
...
Whereas hpsa_free_sas_phy() does:
...
sas_port_delete_phy()
sas_phy_delete()
...
If hpsa_sas_port_add_phy() returns an error, hpsa_free_sas_phy() can not be
called to free the memory because the port and the phy have not been added
yet.
Replace hpsa_free_sas_phy() with sas_phy_free() and kfree() to avoid kernel
crash in this case.
Fixes: d04e62b9d6 ("hpsa: add in sas transport class")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221110151129.394389-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In mpt3sas_transport_port_add(), if sas_rphy_add() returns error,
sas_rphy_free() needs be called to free the resource allocated in
sas_end_device_alloc(). Otherwise a kernel crash will happen:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108
CPU: 45 PID: 37020 Comm: bash Kdump: loaded Tainted: G W 6.1.0-rc1+ #189
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x54/0x3d0
lr : device_del+0x37c/0x3d0
Call trace:
device_del+0x54/0x3d0
attribute_container_class_device_del+0x28/0x38
transport_remove_classdev+0x6c/0x80
attribute_container_device_trigger+0x108/0x110
transport_remove_device+0x28/0x38
sas_rphy_remove+0x50/0x78 [scsi_transport_sas]
sas_port_delete+0x30/0x148 [scsi_transport_sas]
do_sas_phy_delete+0x78/0x80 [scsi_transport_sas]
device_for_each_child+0x68/0xb0
sas_remove_children+0x30/0x50 [scsi_transport_sas]
sas_rphy_remove+0x38/0x78 [scsi_transport_sas]
sas_port_delete+0x30/0x148 [scsi_transport_sas]
do_sas_phy_delete+0x78/0x80 [scsi_transport_sas]
device_for_each_child+0x68/0xb0
sas_remove_children+0x30/0x50 [scsi_transport_sas]
sas_remove_host+0x20/0x38 [scsi_transport_sas]
scsih_remove+0xd8/0x420 [mpt3sas]
Because transport_add_device() is not called when sas_rphy_add() fails, the
device is not added. When sas_rphy_remove() is subsequently called to
remove the device in the remove() path, a NULL pointer dereference happens.
Fixes: f92363d123 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221109032403.1636422-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmOA1C0THHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXoofCADVaWCNcmktsiMxeNuMGJULbib5Jf/q
69axU1totvczkff0Cg9NuDQoqXIJKF9NB4HbO0atqI4VXwInk6Y8xxNFY/EzGAat
6Dr+y6lT2OL+qzjkk8yMB8CQM67XTfDNOVeo8tVSpTOnCohHyQw4QSJmlh/cO60l
h33UbvWwzTkxuZCGJxULGOEsydw1ktoEUC/TS0hqWVG/vmqfPBGiEb2oWU+lPE/0
cARhsV+VpLQ4bX960pcrbRvkEgydEtJHCvkU5k8C5ZoPaStNPvY/6we96eB+r4i+
htb4LDN8n7M9EZS30/xm/DLmemawKk57bv5fZtVv+98srtQhgO3kc2iu
=mp04
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20221125' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Fix IRTE allocation in Hyper-V PCI controller (Dexuan Cui)
- Fix handling of SCSI srb_status and capacity change events (Michael
Kelley)
- Restore VP assist page after CPU offlining and onlining (Vitaly
Kuznetsov)
- Fix some memory leak issues in VMBus (Yang Yingliang)
* tag 'hyperv-fixes-signed-20221125' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: fix possible memory leak in vmbus_device_register()
Drivers: hv: vmbus: fix double free in the error path of vmbus_add_channel_work()
PCI: hv: Only reuse existing IRTE allocation for Multi-MSI
scsi: storvsc: Fix handling of srb_status and capacity change events
x86/hyperv: Restore VP assist page after cpu offlining/onlining
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The hpda_alloc_ctlr_info() allocates h and its field reply_map. However, in
hpsa_init_one(), if alloc_percpu() failed, the hpsa_init_one() jumps to
clean1 directly, which frees h and leaks the h->reply_map.
Fix by calling hpda_free_ctlr_info() to release h->replay_map and h instead
free h directly.
Fixes: 8b834bff1b ("scsi: hpsa: fix selection of reply queue")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221122015751.87284-1-yuancan@huawei.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If scsi_dispatch_cmd() failed, the SCSI command was not sent to the target.
scsi_queue_rq() would return BLK_STS_RESOURCE if scsi_dispatch_cmd()
failed, and the related request would be requeued. The timeout of this
request would not fire, so noone would increase iodone_cnt.
Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
Link: https://lore.kernel.org/r/20221123122137.150776-3-haowenchao@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a SCSI command times out and is going to be aborted, we should increase
the iodone_cnt of the related scsi_device. Otherwise the iodone_cnt would
be smaller than iorequest_cnt.
Increasing iodone_cnt in scsi_timeout() would not cause a double accounting
issue. Brief analysis follows:
- We add the iodone_cnt when BLK_EH_DONE is returned in
scsi_timeout(). The related command's timeout event would not happen.
- If the abort succeeds and the command is not retried, the command would
be completed with scsi_finish_command() which would not increase
iodone_cnt.
- If the abort succeeds and the command is retried, it would be requeue. A
scsi_dispatch_cmd() would be called and iorequest_cnt would be increased
again.
- If the abort fails, the error handler successfully recovers the device,
and the command is not retried, the command would be completed with
scsi_finish_command() which would not increase iodone_cnt.
- If the abort fails, the error handler successfully recovers the device,
and the command is retried, the iorequest_cnt would be increased again.
Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
Link: https://lore.kernel.org/r/20221123122137.150776-2-haowenchao@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are two iscsi_set_param() functions defined in libiscsi.c and
scsi_transport_iscsi.c respectively which is confusing.
Rename the one in scsi_transport_iscsi.c to iscsi_if_set_param().
Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
Link: https://lore.kernel.org/r/20221122181105.4123935-1-haowenchao@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Nothing in this file needs anything from linux/msi.h
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221113202428.436270297@linutronix.de
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Five small fixes, all in drivers. Most of these are error leg freeing
issues, with the only really user visible one being the zfcp fix.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY3lYZyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishflGAPwIJV0F
42sRod5/ULPVh3YRtSzUWwhVqSxlxN6eAaZJbgD/fcPsIa96WCtSYjevLPc+afDh
Ecb5nfwbA8cc9cjqmS8=
=NNYw
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Five small fixes, all in drivers.
Most of these are error leg freeing issues, with the only really user
visible one being the zfcp fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: iscsi: Fix possible memory leak when device_register() failed
scsi: zfcp: Fix double free of FSF request when qdio send fails
scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()
scsi: target: tcm_loop: Fix possible name leak in tcm_loop_setup_hba_bus()
scsi: mpi3mr: Suppress command reply debug prints
This is a simple mechanical transformation done by:
@@
expression E;
@@
- prandom_u32_max
+ get_random_u32_below
(E)
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Reviewed-by: SeongJae Park <sj@kernel.org> # for damon
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
When a FLOGI completes with a sequence timeout error, a freed kref ptr
dereference crash can occur due to a timing race involving ndlp referencing
in lpfc_dev_loss_tmo_callbk.
Fix by ensuring the driver accounts for an outstanding FLOGI when dev_loss
is active. Also, don't remove the HBA_FLOGI_OUTSTANDING flag when the
FLOGI is retried to allow the driver to handle the reference counts
correctly in lpfc_dev_loss_tmo_handler.
Reported-by: Dietmar Hahn <dietmar.hahn@fujitsu.com>
Tested-by: Dietmar Hahn <dietmar.hahn@fujitsu.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20221116011921.105995-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The dynamic mi_ver value holds the currently configured MI setting. mi_ver
was being displayed as part of the cmf_info sysfs attribute, when the
output string meant to display MI capabilities instead.
Add a mi_cap member in the lpfc_pc_sli4_params structure that will store MI
capabilities during initialization so that cmf_info prints out capabilities
instead of current configuration.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20221116011921.105995-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The lpfc_cmf_timer adjusts phba->cmf_link_byte_count periodically and can
artifically inflate bandwidth percent.
During bandwidth calculation, correct for this by setting a cap of logging
a maximum of 100%.
Bandwidth calculation is only used for display under LOG_CGN_MGMT so there
is no expectation of impacts on performance.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20221116011921.105995-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Adapter configurations with limited EQ resources may fail to initialize.
Firmware resources are queried in lpfc_sli4_read_config(). The driver
parameters cfg_irq_chann and cfg_hdw_queue are adjusted from defaults if
constrained by firmware resources.
The minimum resource check includes a special allocation for queues such as
ELS, MBOX, NVME LS. However the additional reservation was also incorrectly
applied to EQ resources.
Reordered WQ|CQ|EQ resource checks to apply the special allocation
adjustment to WQ and CQ resources only.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20221116011921.105995-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element array with flexible-array
member in struct fdmi_attr_s.
Important to mention is that doing a build before/after this patch results
in no binary output differences.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines
on memcpy() and help us make progress towards globally enabling
-fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/209
Link: https://github.com/KSPP/linux/issues/79
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/Y3P1rEEBq7HzJygq@work
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Variable ev_qual is being assigned and modified but the end result is never
used. The variable is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221111170824.558250-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use memset_startat() helper to simplify the code, no functional changes in
this patch.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221111074310.132125-1-xiujianfeng@huawei.com
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As 'lbdof_blen' is coming from user, if the size in kzalloc() is >=
MAX_ORDER then we hit a warning.
Call trace:
sg_ioctl
sg_ioctl_common
scsi_ioctl
sg_scsi_ioctl
blk_execute_rq
blk_mq_sched_insert_request
blk_mq_run_hw_queue
__blk_mq_delay_run_hw_queue
__blk_mq_run_hw_queue
blk_mq_sched_dispatch_requests
__blk_mq_sched_dispatch_requests
blk_mq_dispatch_rq_list
scsi_queue_rq
scsi_dispatch_cmd
scsi_debug_queuecommand
schedule_resp
resp_write_scat
If you try to allocate a memory larger than(>=) MAX_ORDER, then kmalloc()
will definitely fail. It creates a stack trace and messes up dmesg. The
user controls the size here so if they specify a too large size it will
fail.
Add __GFP_NOWARN in order to avoid too large allocation warning. This is
detected by static analysis using smatch.
Fixes: 481b5e5c79 ("scsi: scsi_debug: add resp_write_scat function")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221111100526.1790533-1-harshit.m.mogalapalli@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Gerry Morong <gerry.morong@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/166793533417.322537.3074216622272955440.stgit@brunhilda
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Initialize features to 0 before processing.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike Mcgowan <mike.mcgowan@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/166793532902.322537.2436075977808555348.stgit@brunhilda
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add in a call to flush the controller cache during driver removal.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike Mcgowan <mike.mcgowan@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Gilbert Wu <Gilbert.Wu@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/166793532388.322537.878022136408270892.stgit@brunhilda
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct device count for multi-actuator drives which can cause kernel
panics.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike Mcgowan <mike.mcgowan@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Kumar Meiyappan <Kumar.Meiyappan@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/166793531872.322537.9003385780343419275.stgit@brunhilda
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Change the sysfs raid_level attribute from "RAID-0" to N/A.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowan <mike.mcgowan@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/166793531357.322537.8639138137605612362.stgit@brunhilda
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct maximum LUN number for multi-actuator devices.
When multi-actuator support was added to smartpqi, the maximum number of
LUNs supported for multi-actuator devices was supposed to be changed from
unlimited to 256, but the setting was inadvertently left at unlimited.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/166793530842.322537.816949081443241857.stgit@brunhilda
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for host_tagset.
Also move the reserved command slots to the end of the pool to eliminate an
addition operation for every SCSI request.
This patch was originally authored by Hannes Reinecke here:
Link: https://lore.kernel.org/linux-block/20191126131009.71726-8-hare@suse.de/
But we NAKed this patch because we wanted to fully test multipath
failover operations.
Suggested-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@microchip.com>
Reviewed-by: Mike McGowen <Mike.McGowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/166793529811.322537.3294617845448383948.stgit@brunhilda
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pointer lp is being initialized and incremented but the result is never
read. The pointer is redundant and can be removed.
Once lp is removed, pcmd is not longer used. So remove pcmd as well
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Link: https://lore.kernel.org/r/20221108183620.93978-1-jsmart2021@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove the usage of dma_get_required_mask() API. Directly set the DMA mask
to 63/64 if the system is a 64bit machine.
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Link: https://lore.kernel.org/r/20221111102246.19995-2-sreekanth.reddy@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove the usage of dma_get_required_mask() API. Directly set the DMA mask
to 63/64 if the system is a 64bit machine.
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Link: https://lore.kernel.org/r/20221028091655.17741-2-sreekanth.reddy@broadcom.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If device_register() returns error, the name allocated by the
dev_set_name() need be freed. As described in the comment of
device_register(), we should use put_device() to give up the reference in
the error path.
Fix this by calling put_device(), the name will be freed in the
kobject_cleanup(), and this patch modified resources will be released by
calling the corresponding callback function in the device_release().
Signed-off-by: Zhou Guanghui <zhouguanghui1@huawei.com>
Link: https://lore.kernel.org/r/20221110033729.1555-1-zhouguanghui1@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If device_register() fails in sdebug_add_host_helper(), it will goto clean
and sdbg_host will be freed, but sdbg_host->host_list will not be removed
from sdebug_host_list, then list traversal may cause UAF. Fix it.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221117084421.58918-1-yuancan@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After it receives command reply, mpi3mr driver checks command result. If
the result is not zero, it prints out command information. This debug
information is confusing since they are printed even when the non-zero
result is expected. "Power-on or device reset occurred" is printed for Test
Unit Ready command at drive detection. Inquiry failure for unsupported VPD
page header is also printed. They are harmless but look like failures.
To avoid the confusion, print the command reply debug information only when
the module parameter logging_level has value MPI3_DEBUG_SCSI_ERROR= 64, in
same manner as mpt3sas driver.
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20221111014449.1649968-1-shinichiro.kawasaki@wdc.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Three small fixes, all in drivers. The sas one is in an unlikely
error leg, the debug one is to make it more standards conformant and
the ibmvfc one is to fix a user visible bug where a failover could
lose all paths to the device.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY2+0+iYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXfTAQCxqdCV
jb6MSs0IqB/EtTWYhq6znt6Tz4f544+esrtn+wEAxD5G8+6p7hbKi9GzPz4vLke4
sTT3xTOd4I2iLaaM3p0=
=v1jf
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small fixes, all in drivers.
The sas one is in an unlikely error leg, the debug one is to make it
more standards conformant and the ibmvfc one is to fix a user visible
bug where a failover could lose all paths to the device"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_debug: Make the READ CAPACITY response compliant with ZBC
scsi: scsi_transport_sas: Fix error handling in sas_phy_add()
scsi: ibmvfc: Avoid path failures during live migration
Current handling of the srb_status is incorrect. Commit 52e1b3b3da
("scsi: storvsc: Correctly handle multiple flags in srb_status")
is based on srb_status being a set of flags, when in fact only the
2 high order bits are flags and the remaining 6 bits are an integer
status. Because the integer values of interest mostly look like flags,
the code actually works when treated that way.
But in the interest of correctness going forward, fix this by treating
the low 6 bits of srb_status as an integer status code. Add handling
for SRB_STATUS_INVALID_REQUEST, which was the original intent of commit
52e1b3b3da. Furthermore, treat the ERROR, ABORTED, and INVALID_REQUEST
srb status codes as essentially equivalent for the cases we care about.
There's no harm in doing so, and it isn't always clear which status code
current or older versions of Hyper-V report for particular conditions.
Treating the srb status codes as equivalent has the additional benefit
of ensuring that capacity change events result in an immediate rescan
so that the new size is known to Linux. Existing code checks SCSI
sense data for capacity change events when the srb status is ABORTED.
But capacity change events are also being observed when Hyper-V reports
the srb status as ERROR. Without the immediate rescan, the new size
isn't known until something else causes a rescan (such as running
fdisk to expand a partition), and in the meantime, tools such as "lsblk"
continue to report the old size.
Fixes: 52e1b3b3da ("scsi: storvsc: Correctly handle multiple flags in srb_status")
Reported-by: Juan Tian <juantian@microsoft.com>
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1668019722-1983-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Variable 'found_devs' is just being incremented and it's never used
anywhere else. Remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221101104733.30363-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following two compiler warnings:
drivers/scsi/qla2xxx/qla_init.c: In function ‘qla24xx_async_abort_cmd’:
drivers/scsi/qla2xxx/qla_init.c:171:17: warning: variable ‘bail’ set but not used [-Wunused-but-set-variable]
171 | uint8_t bail;
| ^~~~
drivers/scsi/qla2xxx/qla_init.c: In function ‘qla2x00_async_tm_cmd’:
drivers/scsi/qla2xxx/qla_init.c:2023:17: warning: variable ‘bail’ set but not used [-Wunused-but-set-variable]
2023 | uint8_t bail;
| ^~~~
Cc: Arun Easi <arun.easi@qlogic.com>
Cc: Giridhar Malavali <giridhar.malavali@qlogic.com>
Fixes: feafb7b171 ("[SCSI] qla2xxx: Fix vport delete issues")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221031224818.2607882-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since commit f93ed747e2 ("scsi: core: Release SCSI devices
synchronously") it is no longer allowed to call scsi_device_put() from
atomic context.
Rework bfad_reset_sdev_bflags() such that scsi_device_put() is no longer
called. This fixes the following smatch warning:
drivers/scsi/bfa/bfad_bsg.c:2551 bfad_iocmd_lunmask_reset_lunscan_mode() warn: sleeping in atomic context
bfad_iocmd_lunmask() <- disables preempt
-> bfad_iocmd_lunmask_reset_lunscan_mode()
-> scsi_device_put()
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221031224728.2607760-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Before modifying bfad_reset_sdev_bflags(), convert it from a macro into a
function.
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221031224728.2607760-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move a scsi_device_put() call from alua_rtpg_select_sdev() to its
callers. Fixes the following smatch complaint:
drivers/scsi/device_handler/scsi_dh_alua.c:853 alua_rtpg_select_sdev() warn: sleeping in atomic context
alua_rtpg_work() <- disables preempt
-> alua_rtpg_select_sdev()
-> scsi_device_put()
Cc: Hannes Reinecke <hare@suse.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221031224728.2607760-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following smatch warning:
drivers/scsi/device_handler/scsi_dh_alua.c:1013 alua_rtpg_queue() warn: sleeping in atomic context
alua_check_vpd() <- disables preempt
-> alua_rtpg_queue()
-> scsi_device_put()
Cc: Hannes Reinecke <hare@suse.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221031224728.2607760-2-bvanassche@acm.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function pointer
prototype to make sure the call target is valid to help mitigate ROP
attacks. If they are not identical, there is a failure at run time, which
manifests as either a kernel panic or thread getting killed. A proposed
warning in clang aims to catch these at compile time, which reveals:
drivers/scsi/elx/libefc/efc_node.c:811:22: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict]
ctx->current_state = state;
^ ~~~~~
drivers/scsi/elx/libefc/efc_node.c:878:21: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict]
node->nodedb_state = state;
^ ~~~~~
drivers/scsi/elx/libefc/efc_node.c:905:6: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' from 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') [-Werror,-Wincompatible-function-pointer-types-strict]
pf = node->nodedb_state;
^ ~~~~~~~~~~~~~~~~~~
drivers/scsi/elx/libefc/efc_device.c:455:22: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict]
node->nodedb_state = __efc_d_init;
^ ~~~~~~~~~~~~
drivers/scsi/elx/libefc/efc_sm.c:41:22: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict]
ctx->current_state = state;
^ ~~~~~
The type of the second parameter in the prototypes of ->current_state() and
->nodedb_state() ('u32') does not match the implementations, which have a
second parameter type of 'enum efc_sm_event'. Update the prototypes to have
the correct second parameter type, clearing up all the warnings and CFI
failures.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20221102161906.2781508-1-nathan@kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Variable 'adapter_count' is just being incremented and it's never used
anywhere else. Remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221031160512.872153-1-colin.i.king@gmail.com
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
From ZBC-1:
- RC BASIS = 0: The RETURNED LOGICAL BLOCK ADDRESS field indicates the
highest LBA of a contiguous range of zones that are not sequential write
required zones starting with the first zone.
- RC BASIS = 1: The RETURNED LOGICAL BLOCK ADDRESS field indicates the LBA
of the last logical block on the logical unit.
The current scsi_debug READ CAPACITY response does not comply with the
above if there are one or more sequential write required zones. SCSI
initiators need a way to retrieve the largest valid LBA from SCSI
devices. Reporting the largest valid LBA if there are one or more
sequential zones requires to set the RC BASIS field in the READ CAPACITY
response to one. Hence this patch.
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221102193248.3177608-1-bvanassche@acm.org
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If transport_add_device() fails in sas_phy_add(), the kernel will crash
trying to delete the device in transport_remove_device() called from
sas_remove_host().
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108
CPU: 61 PID: 42829 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc1+ #173
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x54/0x3d0
lr : device_del+0x37c/0x3d0
Call trace:
device_del+0x54/0x3d0
attribute_container_class_device_del+0x28/0x38
transport_remove_classdev+0x6c/0x80
attribute_container_device_trigger+0x108/0x110
transport_remove_device+0x28/0x38
sas_phy_delete+0x30/0x60 [scsi_transport_sas]
do_sas_phy_delete+0x6c/0x80 [scsi_transport_sas]
device_for_each_child+0x68/0xb0
sas_remove_children+0x40/0x50 [scsi_transport_sas]
sas_remove_host+0x20/0x38 [scsi_transport_sas]
hisi_sas_remove+0x40/0x68 [hisi_sas_main]
hisi_sas_v2_remove+0x20/0x30 [hisi_sas_v2_hw]
platform_remove+0x2c/0x60
Fix this by checking and handling return value of transport_add_device()
in sas_phy_add().
Fixes: c7ebbbce36 ("[SCSI] SAS transport class")
Suggested-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221107124828.115557-1-yangyingliang@huawei.com
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix an issue reported when performing a live migration when multipath is
configured with a short fast fail timeout of 5 seconds and also to have
no_path_retry set to fail. In this scenario, all paths would go into the
devloss state while the ibmvfc driver went through discovery to log back
in. On a loaded system, the discovery might take longer than 5 seconds,
which was resulting in all paths being marked failed, which then resulted
in a read only filesystem.
This patch changes the migration code in ibmvfc to avoid deleting rports at
all in this scenario, so we avoid losing all paths.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20221026181356.148517-1-brking@linux.vnet.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Nothing in blk_mq_wait_quiesce_done needs the request_queue now, so just
pass the tagset, and move the non-mq check into the only caller that
needs it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
21 small fixes, all in drivers. Some of these arrived during the
merge window and got held over to make sure of testing on the -rc
tree. The biggest change is for Standards conformance in the target
driver, closely followed by a set of bug fixes in megaraid_sas.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY1xAISYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishR8DAQCm8x/C
f0h26w+Mv09spAyw6fqvuoC3+giLmiIuxZq1FgD+M7CZ6mcLhsxpE8GVNzKWnPvI
jVYDsKdJ82B+tuIDDa0=
=Z+/m
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Varions small fixes, all in drivers.
Some of these arrived during the merge window and got held over to
make sure of testing on the -rc tree.
The biggest change is for standards conformance in the target driver,
closely followed by a set of bug fixes in megaraid_sas"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits)
scsi: ufs: core: Fix typo in comment
scsi: mpi3mr: Select CONFIG_SCSI_SAS_ATTRS
scsi: ufs: core: Fix typo for register name in comments
scsi: pm80xx: Display proc_name in sysfs
scsi: ufs: core: Fix the error log in ufshcd_query_flag_retry()
scsi: ufs: core: Remove unneeded casts from void *
scsi: lpfc: Fix spelling mistake "unsolicted" -> "unsolicited"
scsi: qla2xxx: Use transport-defined speed mask for supported_speeds
scsi: target: iblock: Fold iblock_emulate_read_cap_with_block_size() into iblock_get_blocks()
scsi: qla2xxx: Fix serialization of DCBX TLV data request
scsi: ufs: qcom: Remove redundant dev_err() call
scsi: megaraid_sas: Move megasas_dbg_lvl init to megasas_init()
scsi: megaraid_sas: Remove unnecessary memset()
scsi: megaraid_sas: Simplify megasas_update_device_list
scsi: megaraid_sas: Correct an error message
scsi: megaraid_sas: Correct value passed to scsi_device_lookup()
scsi: target: core: UA on all LUNs after reset
scsi: target: core: New key must be used for moved PR
scsi: target: core: Abort all preempted regs if requested
scsi: target: core: Fix memory leak in preempt_and_abort
...
In commit 0b639decf6 ("scsi: pm8001: Modify task abort handling for SATA
task"), code was introduced to dereference "task" pointer in
pm8001_abort_task(). However there was a pre-existing later check for
"!task", which spooked the kernel test robot.
Function pm8001_abort_task() should never be passed NULL for "task"
pointer, so remove that check. Also remove the "unlikely" hint, as this is
not fastpath code.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1666781764-123090-1-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Variable i is just being incremented and it's never used anywhere else. The
variable and the increment are redundant so remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221024141101.2161167-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Now that blk_mq_destroy_queue does not release the queue reference, there
is no need for a second queue reference to be held by the scsi_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20221018135720.670094-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The fact that blk_mq_destroy_queue also drops a queue reference leads
to various places having to grab an extra reference. Move the call to
blk_put_queue into the callers to allow removing the extra references.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20221018135720.670094-2-hch@lst.de
[axboe: fix fabrics_q vs admin_q conflict in nvme core.c]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a re-do of commit e0e0747de0 ("scsi: mpt3sas: Fix return value
check of dma_get_required_mask()"), which I ended up undoing in a
mis-merge in commit 62e6e5940c ("Merge tag 'scsi-misc' of
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi").
The original commit message was
scsi: mpt3sas: Fix return value check of dma_get_required_mask()
Fix the incorrect return value check of dma_get_required_mask(). Due to
this incorrect check, the driver was always setting the DMA mask to 63 bit.
Link: https://lore.kernel.org/r/20220913120538.18759-2-sreekanth.reddy@broadcom.com
Fixes: ba27c5cf28 ("scsi: mpt3sas: Don't change the DMA coherent mask after allocations")
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
and this fix was lost when I mis-merged the conflict with commit
9df650963b ("scsi: mpt3sas: Don't change DMA mask while reallocating
pools").
Reported-by: Juergen Gross <jgross@suse.com>
Fixes: 62e6e5940c ("Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi")
Link: https://lore.kernel.org/all/CAHk-=wjaK-TxrNaGtFDpL9qNHL1MVkWXO1TT6vObD5tXMSC4Zg@mail.gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current behavior for SCSI commands submitted while error recovery is
ongoing is to retry command submission after error recovery has finished.
See also the scsi_host_in_recovery() check in scsi_host_queue_ready(). Add
support for failing SCSI commands while host recovery is in progress. This
functionality will be used to fix a deadlock in the UFS driver.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-4-bvanassche@acm.org
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 6600593cbd ("block: rename BLK_EH_NOT_HANDLED to BLK_EH_DONE")
made it impossible for .eh_timed_out() implementations to call
scsi_done() without causing a crash.
Restore support for SCSI timeout handlers to call scsi_done() as follows:
* Change all .eh_timed_out() handlers as follows:
- Change the return type into enum scsi_timeout_action.
- Change BLK_EH_RESET_TIMER into SCSI_EH_RESET_TIMER.
- Change BLK_EH_DONE into SCSI_EH_NOT_HANDLED.
* In scsi_timeout(), convert the SCSI_EH_* values into BLK_EH_* values.
Reviewed-by: Lee Duncan <lduncan@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-3-bvanassche@acm.org
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If there is a race between scsi_done() and scsi_timeout() and if
scsi_timeout() loses the race, scsi_timeout() should not reset the request
timer. Hence change the return value for this case from BLK_EH_RESET_TIMER
into BLK_EH_DONE.
Although the block layer holds a reference on a request (req->ref) while
calling a timeout handler, restarting the timer (blk_add_timer()) while a
request is being completed is racy.
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 15f73f5b3e ("blk-mq: move failure injection out of blk_mq_complete_request")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The DUMP_MEMORY mailbox command is implemented for page A0 and A2 to
retrieve transceiver information from firmware.
The mailbox command output is then formatted to print raw data values for
userspace to parse via sysfs.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20221017164323.14536-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When bandwidth reduces from or recovers back to 100% due to congestion
management, log the event.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20221017164323.14536-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During I/O and simultaneous cat of /sys/kernel/debug/lpfc/fnX/rx_monitor, a
hard lockup similar to the call trace below may occur.
The spin_lock_bh in lpfc_rx_monitor_report is not protecting from timer
interrupts as expected, so change the strength of the spin lock to _irq.
Kernel panic - not syncing: Hard LOCKUP
CPU: 3 PID: 110402 Comm: cat Kdump: loaded
exception RIP: native_queued_spin_lock_slowpath+91
[IRQ stack]
native_queued_spin_lock_slowpath at ffffffffb814e30b
_raw_spin_lock at ffffffffb89a667a
lpfc_rx_monitor_record at ffffffffc0a73a36 [lpfc]
lpfc_cmf_timer at ffffffffc0abbc67 [lpfc]
__hrtimer_run_queues at ffffffffb8184250
hrtimer_interrupt at ffffffffb8184ab0
smp_apic_timer_interrupt at ffffffffb8a026ba
apic_timer_interrupt at ffffffffb8a01c4f
[End of IRQ stack]
apic_timer_interrupt at ffffffffb8a01c4f
lpfc_rx_monitor_report at ffffffffc0a73c80 [lpfc]
lpfc_rx_monitor_read at ffffffffc0addde1 [lpfc]
full_proxy_read at ffffffffb83e7fc3
vfs_read at ffffffffb833fe71
ksys_read at ffffffffb83402af
do_syscall_64 at ffffffffb800430b
entry_SYSCALL_64_after_hwframe at ffffffffb8a000ad
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20221017164323.14536-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The reset_in_progress flag was never set.
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20221007230751.309363-1-ipylypiv@google.com
Reviewed-by: Andrew Konecki <awkonecki@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The proc_name entry in sysfs for pm80xx is "(null)" because it is not
initialized in scsi_host_template:
Before:
host:~# cat /sys/class/scsi_host/host6/proc_name
(null)
After:
host:~# cat /sys/class/scsi_host/host6/proc_name
pm80xx
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20221007230651.308969-1-ipylypiv@google.com
Reviewed-by: Jolly Shah <jollys@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The request associated with a SCSI command coming from the block layer has
a unique tag, so use that when possible for getting a slot.
Unfortunately we don't support reserved commands in the SCSI midlayer yet.
As such, SMP tasks - as an example - will not have a request associated, so
in the interim continue to manage those tags for that type of sas_task
internally.
We reserve an arbitrary 4 tags for these internal tags. Indeed, we already
decrement MVS_RSVD_SLOTS by 2 for the shost can_queue when flag
MVF_FLAG_SOC is set. This change was made in commit 20b09c2992 ("[SCSI]
mvsas: add support for 94xx; layout change; bug fixes"), but what those 2
slots are used for is not obvious.
Also make the tag management functions static, where possible.
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1666091763-11023-8-git-send-email-john.garry@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All mvs_tag_init() does is zero the tag bitmap, but this is already done
with the kzalloc() call to alloc the tags, so delete this unneeded
function.
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1666091763-11023-7-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The request associated with a SCSI command coming from the block layer has
a unique tag, so use that when possible for getting a CCB.
Unfortunately we don't support reserved commands in the SCSI midlayer yet,
so in the interim continue to manage those tags internally (along with
tags for private commands).
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1666091763-11023-6-git-send-email-john.garry@huawei.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In commit 5a141315ed ("scsi: pm80xx: Increase the number of outstanding
I/O supported to 1024") the pm8001_ha->tags allocation was moved into
pm8001_init_ccb_tag(). This changed the execution order of allocation.
pm8001_tag_init() used to be called after the pm8001_ha->tags allocation
and now it is called before the allocation.
Before:
pm8001_pci_probe()
`--> pm8001_pci_alloc()
`--> pm8001_alloc()
`--> pm8001_ha->tags = kzalloc(...)
`--> pm8001_tag_init(pm8001_ha); // OK: tags are allocated
After:
pm8001_pci_probe()
`--> pm8001_pci_alloc()
| `--> pm8001_alloc()
| `--> pm8001_tag_init(pm8001_ha); // NOK: tags are not allocated
|
`--> pm8001_init_ccb_tag()
`--> pm8001_ha->tags = kzalloc(...) // today it is bitmap_zalloc()
Since pm8001_ha->tags_num is zero when pm8001_tag_init() is called it does
nothing. Tags memory is allocated with bitmap_zalloc() so there is no need
to manually clear each bit with pm8001_tag_free().
Reviewed-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1666091763-11023-5-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To be consistent with blk-mq, put the reserved tags in the lower region of
the tagset. Eventually we hope to get rid of all this reserved tag
management.
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1666091763-11023-4-git-send-email-john.garry@huawei.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use sas_task_find_rq() to lookup the request per task for its driver tag.
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1666091763-11023-3-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Clean up the code by making use of the newly introduced
ata_port_is_frozen() helper function.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The SAS address comparison of asd_sas_port and expander phy is open
coded. Replace it with sas_phy_match_port_addr().
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-9-yanaijie@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SAS address comparison of expander phys is open coded. Replace it with
sas_phy_addr_match().
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-8-yanaijie@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SAS address comparison of domain device and expander phy is open
coded. Replace it with sas_phy_match_dev_addr().
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-7-yanaijie@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The attached phy finding is open coded. Replace it with
sas_find_attached_phy_id(). To keep things consistent, the return value of
hisi_sas_dev_found() is also changed to -ENODEV after calling
sas_find_attathed_phy_id() failed.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-6-yanaijie@huawei.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The attached phy finding is open coded. Replace it with
sas_find_attached_phy_id(). To keep things consistent, the return value of
mvs_dev_found_notify() is also changed to -ENODEV after calling
sas_find_attathed_phy_id() failed.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-5-yanaijie@huawei.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The attached phy id finding is open coded. Replace it with
sas_find_attached_phy_id(). To keep things consistent, the return value of
pm8001_dev_found_notify() is also changed to -ENODEV after calling
sas_find_attathed_phy_id() failed.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-4-yanaijie@huawei.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
LLDDs are all implementing their own attached phy ID finding code. Factor
it out to libsas.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-3-yanaijie@huawei.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
SAS address comparison is widely used in libsas. However they are all
opencoded and to avoid the line spill over 80 columns, are mostly split
into multi-lines. Introduce some helpers to prepare for some refactoring.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-2-yanaijie@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All upstream scsi_device_put() calls happen from thread context. Hence
simplify scsi_device_put() by always calling the release function
synchronously. This commit prepares for constifying the SCSI host template
by removing an assignment that clears the module pointer in the SCSI host
template.
scsi_device_dev_release_usercontext() was introduced in 2006 via
commit 65110b2168 ("[SCSI] fix wrong context bugs in SCSI").
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221015002418.30955-9-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi_device_get() may be called from atomic context, e.g. by
shost_for_each_device(). A later commit will allow put_device() to sleep
for SCSI devices. Hence remove the put_device() call from
scsi_device_get().
According to Rusty Russell's "Module Refcount and Stuff mini-FAQ", calling
module_put() from atomic context is allowed since considerable time. See
also https://lkml.org/lkml/2002/11/18/330.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221015002418.30955-8-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use __starget_for_each_device() instead of open-coding
starget_for_each_device(). Run the queues asynchronously instead of
synchronously.
This commit removes code that calls scsi_device_put() from atomic context.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221015002418.30955-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of using scsi_host_template members to track the SCSI proc
directory entries, track these entries in a list. This changes the time
needed for looking up the proc dir pointer from O(1) into O(n). This is
considered acceptable since the number of SCSI host adapter types per host
is usually small (less than ten).
This change has been tested by attaching two USB storage devices to a qemu
host:
$ grep -aH . /proc/scsi/usb-storage/*
/proc/scsi/usb-storage/7: Host scsi7: usb-storage
/proc/scsi/usb-storage/7: Vendor: QEMU
/proc/scsi/usb-storage/7: Product: QEMU USB HARDDRIVE
/proc/scsi/usb-storage/7:Serial Number: 1-0000:00:02.1:00.0-6
/proc/scsi/usb-storage/7: Protocol: Transparent SCSI
/proc/scsi/usb-storage/7: Transport: Bulk
/proc/scsi/usb-storage/7: Quirks: SANE_SENSE
/proc/scsi/usb-storage/8: Host scsi8: usb-storage
/proc/scsi/usb-storage/8: Vendor: QEMU
/proc/scsi/usb-storage/8: Product: QEMU USB HARDDRIVE
/proc/scsi/usb-storage/8:Serial Number: 1-0000:00:02.1:00.0-7
/proc/scsi/usb-storage/8: Protocol: Transparent SCSI
/proc/scsi/usb-storage/8: Transport: Bulk
/proc/scsi/usb-storage/8: Quirks: SANE_SENSE
This commit prepares for constifying most SCSI host templates.
Reviewed-by: John Garry <john.garry@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221015002418.30955-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Users expect that the contents of /proc/scsi is in sync with the contents
of /sys/class/scsi_host. Hence fail host creation if creating the proc
directory fails.
Suggested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221015002418.30955-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for removing the 'proc_dir' and 'present' members from the SCSI
host template. This commit does not change any functionality.
Reviewed-by: John Garry <john.garry@huawei.com>
Cc: Bradley Grove <linuxdrivers@attotech.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221015002418.30955-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for removing the 'proc_dir' and 'present' members from the SCSI
host template by implicitly initializing 'present' and 'emulated' in
'driver_template'.
Reviewed-by: John Garry <john.garry@huawei.com>
Cc: Bradley Grove <linuxdrivers@attotech.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221015002418.30955-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 5e633302ac ("scsi: lpfc: vmid: Add support for VMID in mailbox
command") introduced allocations for the VMID resources in
lpfc_create_port() after the call to scsi_host_alloc(). Upon failure on the
VMID allocations, the new code would branch to the 'out' label, which
returns NULL without unwinding anything, thus skipping the call to
scsi_host_put().
Fix the problem by creating a separate label 'out_free_vmid' to unwind the
VMID resources and make the 'out_put_shost' label call only
scsi_host_put(), as was done before the introduction of allocations for
VMID.
Fixes: 5e633302ac ("scsi: lpfc: vmid: Add support for VMID in mailbox command")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Link: https://lore.kernel.org/r/20220916035908.712799-1-rafaelmendsr@gmail.com
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In sas_ata_task_done(), for commands which complete with error we set the
SATA dev FIS status field with ATA_ERR. In ata_eh_analyze_tf() this would
be interpreted as a HSM error. Set ATA_DRDY, which will lead libata to
judge as a device error, which is a safer bet.
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1665998435-199946-9-git-send-email-john.garry@huawei.com
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We have no users outside libsas any longer, so make sas_alloc_task(),
sas_alloc_slow_task(), and sas_free_task() private.
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1665998435-199946-8-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Niklas Cassel <niklas.cassel@wdc.com> # pm80xx
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In commit c6b9ef5779 ("[SCSI] pm80xx: NCQ error handling changes") the
driver had support added to handle NCQ errors but much of what is done in
this handling is duplicated from the libata EH.
In that named commit we handle in 2x main steps:
a. Issue read log ext10 to examine and clear the errors
b. Issue SATA_ABORT all command
Indeed, in libata EH, we do similar to above:
a. ata_do_eh() -> ata_eh_autopsy() -> ata_eh_link_autopsy() ->
ata_eh_analyze_ncq_error() -> ata_eh_read_log_10h()
b. ata_do_eh() -> ata_eh_recover() which will issue a device soft reset
or hard reset
Since there is so much duplication, use sas_ata_device_link_abort() which
will abort all pending IOs and kick of ATA EH which will do the steps,
above.
However we will not follow the advisory to send the SATA_ABORT all command
after the autopsy in read log ext10. Indeed, in libsas EH, we already send
a per-task SATA_ABORT command, and this is prior to the ATA EH kicking in
and issuing the read log ext10 in the recovery process. I judge that this
is ok as the SATA_ABORT command does not actually send any protocol on the
link to abort I/O on the other side, so would not change any state on the
disk (for the read log ext10 command).
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1665998435-199946-7-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Niklas Cassel <niklas.cassel@wdc.com> # pm80xx
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When we try to abort a SATA task, the CCB of the task which we are trying
to avoid may still complete. In this case, we should not touch the task
associated with that CCB as we can race with libsas freeing the last later
in sas_eh_handle_sas_errors() -> sas_eh_finish_cmd() for when
TASK_IS_ABORTED is returned from sas_scsi_find_task()
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1665998435-199946-6-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Niklas Cassel <niklas.cassel@wdc.com> # pm80xx
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When an NCQ error occurs, the controller will abnormally complete the I/Os
that are newly delivered to disk, and bit8 in CQ dw3 will be set which
indicates that the SATA disk is in error state. The current processing flow
is to set ts->stat to SAS_OPEN_REJECT and then sas_ata_task_done() will set
FIS stat to ATA_ERR. After analyzing the I/O by ata_eh_analyze_tf(),
err_mask will set to AC_ERR_HSM. If media error occurs for four times
within 10 minutes and the chip rejects new I/Os for four times, NCQ will be
disabled due to excessive errors, which is undesirable.
Therefore, use sas_task_abort() to handle abnormally completed I/Os when
SATA disk is in error state, as these abnormally completed I/Os are already
processed by sas_ata_device_link_abort() and qc->flag are set to
ATA_QCFLAG_FAILED. If sas_task_abort() is used, qc->err_mask will not be
modified in EH. Unlike the current process flow, it will not increase the
count of ECAT_TOUT_HSM and not turn off NCQ. Like other I/Os on the disk
that do not have an error but do not return after the NCQ error, they are
retried after the EH.
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1665998435-199946-5-git-send-email-john.garry@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When CQ header dw3 SATA_DISK_ERR is set it means this SATA disk is in error
state and the current IPTT is invalid. An invalid IPTT does not correspond
to any slot.
In this scenario, new I/Os that delivered to disk will be rejected by the
controller and all I/Os remaining in the disk should be aborted, which we
add here with the sas_ata_device_link_abort() call.
In hisi_sas_abort_task() we don't want to issue a soft reset as it may
cause info to be lost in the target disk for the ATA EH autopsy. In this
case, just release resources - the disk won't return other I/Os normally
after NCQ Error, so this is safe.
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1665998435-199946-4-git-send-email-john.garry@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Each branch currently defines a slot variable independently, and it is
neater to move it to the function head.
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1665998435-199946-3-git-send-email-john.garry@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Similar to how AHCI handles NCQ errors in ahci_error_intr() ->
ata_port_abort() -> ata_do_link_abort(), add an NCQ error handler for LLDDs
to call to initiate a link abort.
This will mark all outstanding QCs as failed and kick-off EH.
Note:
A "force reset" argument is added for drivers which require the ATA error
handling to always reset the device.
A driver may require this feature for when SATA device per-SCSI cmnd
resources are only released during reset for ATA EH. As such, we need an
option to force reset to be done, regardless of what any EH autopsy
decides.
The SATA device FIS fields are set to indicate a device error from
ata_eh_analyze_tf().
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Suggested-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1665998435-199946-2-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Niklas Cassel <niklas.cassel@wdc.com> # pm80xx
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Userspace can currently write to sysfs to transition sdev_state to RUNNING
or OFFLINE from any source state. This causes issues because proper
transitioning out of some states involves steps besides just changing
sdev_state, so allowing userspace to change sdev_state regardless of the
source state can result in inconsistencies; e.g. with ISCSI we can end up
with sdev_state == SDEV_RUNNING while the device queue is quiesced. Any
task attempting I/O on the device will then hang, and in more recent
kernels, iscsid will hang as well.
More detail about this bug is provided in my first attempt:
https://groups.google.com/g/open-iscsi/c/PNKca4HgPDs/m/CXaDkntOAQAJ
Link: https://lore.kernel.org/r/20220924000241.2967323-1-ushankar@purestorage.com
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Suggested-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The prandom_u32() function has been a deprecated inline wrapper around
get_random_u32() for several releases now, and compiles down to the
exact same code. Replace the deprecated wrapper with a direct call to
the real function. The same also applies to get_random_int(), which is
just a wrapper around get_random_u32(). This was done as a basic find
and replace.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake
Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Acked-by: Helge Deller <deller@gmx.de> # for parisc
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than incurring a division or requesting too many random bytes for
the given range, use the prandom_u32_max() function, which only takes
the minimum required bytes from the RNG and avoids divisions. This was
done mechanically with this coccinelle script:
@basic@
expression E;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u64;
@@
(
- ((T)get_random_u32() % (E))
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ((E) - 1))
+ prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2)
|
- ((u64)(E) * get_random_u32() >> 32)
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ~PAGE_MASK)
+ prandom_u32_max(PAGE_SIZE)
)
@multi_line@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
identifier RAND;
expression E;
@@
- RAND = get_random_u32();
... when != RAND
- RAND %= (E);
+ RAND = prandom_u32_max(E);
// Find a potential literal
@literal_mask@
expression LITERAL;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
position p;
@@
((T)get_random_u32()@p & (LITERAL))
// Add one to the literal.
@script:python add_one@
literal << literal_mask.LITERAL;
RESULT;
@@
value = None
if literal.startswith('0x'):
value = int(literal, 16)
elif literal[0] in '123456789':
value = int(literal, 10)
if value is None:
print("I don't know how to handle %s" % (literal))
cocci.include_match(False)
elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1:
print("Skipping 0x%x for cleanup elsewhere" % (value))
cocci.include_match(False)
elif value & (value + 1) != 0:
print("Skipping 0x%x because it's not a power of two minus one" % (value))
cocci.include_match(False)
elif literal.startswith('0x'):
coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1))
else:
coccinelle.RESULT = cocci.make_expr("%d" % (value + 1))
// Replace the literal mask with the calculated result.
@plus_one@
expression literal_mask.LITERAL;
position literal_mask.p;
expression add_one.RESULT;
identifier FUNC;
@@
- (FUNC()@p & (LITERAL))
+ prandom_u32_max(RESULT)
@collapse_ret@
type T;
identifier VAR;
expression E;
@@
{
- T VAR;
- VAR = (E);
- return VAR;
+ return E;
}
@drop_var@
type T;
identifier VAR;
@@
{
- T VAR;
... when != VAR
}
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: KP Singh <kpsingh@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmNDMCsTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXpmUB/4k6V0JlLc9kxClxK8KCzAasby5hnGz
EPOXyFi6ff1CSiMdpV+oWh/ENQr8lSQYsj6esMNNRr4DLDJ9o6NGtdK05HzizCjs
KwHlvjF0eRsr60zSIySdeAwPyEyupqcpkLSF6oGi53f6OQuC2LDQa/h7FMnSKgxD
TFzkWbFAf1kl/nQTUenxTh+u16umaKsedrD9tQli1vIyhltQbu9Hw2gAV1vWxdKO
Md6BRwaMMz5Lffs6eM2ULlyxNzK1Pk1LWdPeNVHHIeBVxI+YMememFCOA5BBXLXk
QlVGIPtbyHtryK9DRFyhk9UWgdAZIBCDHxBOqXXySOGA+Kc7/DK5zCeB
=f55l
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20221009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Remove unnecessary delay while probing for VMBus (Stanislav
Kinsburskiy)
- Optimize vmbus_on_event (Saurabh Sengar)
- Fix a race in Hyper-V DRM driver (Saurabh Sengar)
- Miscellaneous clean-up patches from various people
* tag 'hyperv-next-signed-20221009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Replace kmap() with kmap_local_page()
drm/hyperv: Add ratelimit on error message
hyperv: simplify and rename generate_guest_id
Drivers: hv: vmbus: Split memcpy of flex-array
scsi: storvsc: remove an extraneous "to" in a comment
Drivers: hv: vmbus: Don't wait for the ACPI device upon initialization
Drivers: hv: vmbus: Use PCI_VENDOR_ID_MICROSOFT for better discoverability
Drivers: hv: vmbus: Fix kernel-doc
drm/hyperv: Don't overwrite dirt_needed value set by host
Drivers: hv: vmbus: Optimize vmbus_on_event
- Debuggability:
- Change most occurances of BUG_ON() to WARN_ON_ONCE()
- Reorganize & fix TASK_ state comparisons, turn it into a bitmap
- Update/fix misc scheduler debugging facilities
- Load-balancing & regular scheduling:
- Improve the behavior of the scheduler in presence of lot of
SCHED_IDLE tasks - in particular they should not impact other
scheduling classes.
- Optimize task load tracking, cleanups & fixes
- Clean up & simplify misc load-balancing code
- Freezer:
- Rewrite the core freezer to behave better wrt thawing and be simpler
in general, by replacing PF_FROZEN with TASK_FROZEN & fixing/adjusting
all the fallout.
- Deadline scheduler:
- Fix the DL capacity-aware code
- Factor out dl_task_is_earliest_deadline() & replenish_dl_new_period()
- Relax/optimize locking in task_non_contending()
- Cleanups:
- Factor out the update_current_exec_runtime() helper
- Various cleanups, simplifications
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KjMD
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Debuggability:
- Change most occurances of BUG_ON() to WARN_ON_ONCE()
- Reorganize & fix TASK_ state comparisons, turn it into a bitmap
- Update/fix misc scheduler debugging facilities
Load-balancing & regular scheduling:
- Improve the behavior of the scheduler in presence of lot of
SCHED_IDLE tasks - in particular they should not impact other
scheduling classes.
- Optimize task load tracking, cleanups & fixes
- Clean up & simplify misc load-balancing code
Freezer:
- Rewrite the core freezer to behave better wrt thawing and be
simpler in general, by replacing PF_FROZEN with TASK_FROZEN &
fixing/adjusting all the fallout.
Deadline scheduler:
- Fix the DL capacity-aware code
- Factor out dl_task_is_earliest_deadline() &
replenish_dl_new_period()
- Relax/optimize locking in task_non_contending()
Cleanups:
- Factor out the update_current_exec_runtime() helper
- Various cleanups, simplifications"
* tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
sched: Fix more TASK_state comparisons
sched: Fix TASK_state comparisons
sched/fair: Move call to list_last_entry() in detach_tasks
sched/fair: Cleanup loop_max and loop_break
sched/fair: Make sure to try to detach at least one movable task
sched: Show PF_flag holes
freezer,sched: Rewrite core freezer logic
sched: Widen TAKS_state literals
sched/wait: Add wait_event_state()
sched/completion: Add wait_for_completion_state()
sched: Add TASK_ANY for wait_task_inactive()
sched: Change wait_task_inactive()s match_state
freezer,umh: Clean up freezer/initrd interaction
freezer: Have {,un}lock_system_sleep() save/restore flags
sched: Rename task_running() to task_on_cpu()
sched/fair: Cleanup for SIS_PROP
sched/fair: Default to false in test_idle_cores()
sched/fair: Remove useless check in select_idle_core()
sched/fair: Avoid double search on same cpu
sched/fair: Remove redundant check in select_idle_smt()
...
Updates to the usual drivers (qla2xxx, lpfc, ufs, hisi_sas, mpi3mr,
mpt3sas, target); the biggest change (from my biased viewpoint) being
that the mpi3mr now attached to the SAS transport class, making it the
first fusion type device to do so. Beyond the usual bug fixing and
security class reworks, there aren't a huge number of core changes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY0B74yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishW2NAP9CPp2R
7NRmSyxcyVYvtCNUW3WxXh65Gn+KgArmg8XucgEAhUBX1fSjOzpERWEU+UaXitbE
Rb+FbjxSc5YxR+nJ/Qc=
=0Wlp
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (qla2xxx, lpfc, ufs, hisi_sas, mpi3mr,
mpt3sas, target). The biggest change (from my biased viewpoint) being
that the mpi3mr now attached to the SAS transport class, making it the
first fusion type device to do so.
Beyond the usual bug fixing and security class reworks, there aren't a
huge number of core changes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()
scsi: mpi3mr: Remove unnecessary cast
scsi: stex: Properly zero out the passthrough command structure
scsi: mpi3mr: Update driver version to 8.2.0.3.0
scsi: mpi3mr: Fix scheduling while atomic type bug
scsi: mpi3mr: Scan the devices during resume time
scsi: mpi3mr: Free enclosure objects during driver unload
scsi: mpi3mr: Handle 0xF003 Fault Code
scsi: mpi3mr: Graceful handling of surprise removal of PCIe HBA
scsi: mpi3mr: Schedule IRQ kthreads only on non-RT kernels
scsi: mpi3mr: Support new power management framework
scsi: mpi3mr: Update mpi3 header files
scsi: mpt3sas: Revert "scsi: mpt3sas: Fix ioc->base_readl() use"
scsi: mpt3sas: Revert "scsi: mpt3sas: Fix writel() use"
scsi: wd33c93: Remove dead code related to the long-gone config WD33C93_PIO
scsi: core: Add I/O timeout count for SCSI device
scsi: qedf: Populate sysfs attributes for vport
scsi: pm8001: Replace one-element array with flexible-array member
scsi: 3w-xxxx: Replace one-element array with flexible-array member
scsi: hptiop: Replace one-element array with flexible-array member in struct hpt_iop_request_ioctl_command()
...
-----BEGIN PGP SIGNATURE-----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=nwLk
-----END PGP SIGNATURE-----
Merge tag 'for-6.1/passthrough-2022-10-04' of git://git.kernel.dk/linux
Pull passthrough updates from Jens Axboe:
"With these changes, passthrough NVMe support over io_uring now
performs at the same level as block device O_DIRECT, and in many cases
6-8% better.
This contains:
- Add support for fixed buffers for passthrough (Anuj, Kanchan)
- Enable batched allocations and freeing on passthrough, similarly to
what we support on the normal storage path (me)
- Fix from Geert fixing an issue with !CONFIG_IO_URING"
* tag 'for-6.1/passthrough-2022-10-04' of git://git.kernel.dk/linux:
io_uring: Add missing inline to io_uring_cmd_import_fixed() dummy
nvme: wire up fixed buffer support for nvme passthrough
nvme: pass ubuffer as an integer
block: extend functionality to map bvec iterator
block: factor out blk_rq_map_bio_alloc helper
block: rename bio_map_put to blk_mq_map_bio_put
nvme: refactor nvme_alloc_request
nvme: refactor nvme_add_user_metadata
nvme: Use blk_rq_map_user_io helper
scsi: Use blk_rq_map_user_io helper
block: add blk_rq_map_user_io
io_uring: introduce fixed buffer support for io_uring_cmd
io_uring: add io_uring_cmd_import_fixed
nvme: enable batched completions of passthrough IO
nvme: split out metadata vs non metadata end_io uring_cmd completions
block: allow end_io based requests in the completion batch handling
block: change request end_io handler to pass back a return value
block: enable batched allocation for blk_mq_alloc_request()
block: kill deprecated BUG_ON() in the flush handling
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmM67XkQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpiHoD/9eN+6YnNRPu5+2zeGnnm1Nlwic6YMZeORr
KFIeC0COMWoFhNBIPFkgAKT+0qIH+uGt5UsHSM3Y5La7wMR8yLxD4PAnvTZ/Ijtt
yxVIOmonJoQ0OrQ2kTbvDXL/9OCUrzwXXyUIEPJnH0Ca1mxeNOgDHbE7VGF6DMul
0D3pI8qs2WLnHlDi1V/8kH5qZ6WoAJSDcb8sTzOUVnyveZPNaZhGQJuHA2XAYMtg
fqKMDJqgmNk6jdTMUgdF5B+rV64PQoCy28I7fXqGkEe+RE5TBy57vAa0XY84V8XR
/a8CEuwMts2ypk1hIcJG8Vv8K6u5war9yPM5MTngKsoMpzNIlhrhaJQVyjKdcs+E
Ixwzexu6xTYcrcq+mUARgeTh79FzTBM/uXEdbCG2G3S6HPd6UZWUJZGfxw/l0Aem
V4xB7lj6SQaJDU1iJCYUaHcekNXhQAPvyVG+R2ED1SO3McTpTPIM1aeigxw6vj7u
bH3Kfdr94Z8HNuoLuiS6YYfjNt2Shf4LEB6GxKJ9TYHtyhdOyO0H64jGHpygrWqN
cSnkWPUqUUNpF7srKM0ZgbliCshvmyJc4aMOFd0gBY/kXf5J/j7IXvh8TFCi9rHH
0KyZH3/3Zsu9geUn3ynznlr4FXU+BcqE6boaa/iWb9sN1m+Rvaahv8cSch/dh44a
vQNj/iOBQA==
=R05e
-----END PGP SIGNATURE-----
Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull requests via Christoph:
- handle number of queue changes in the TCP and RDMA drivers
(Daniel Wagner)
- allow changing the number of queues in nvmet (Daniel Wagner)
- also consider host_iface when checking ip options (Daniel
Wagner)
- don't map pages which can't come from HIGHMEM (Fabio M. De
Francesco)
- avoid unnecessary flush bios in nvmet (Guixin Liu)
- shrink and better pack the nvme_iod structure (Keith Busch)
- add comment for unaligned "fake" nqn (Linjun Bao)
- print actual source IP address through sysfs "address" attr
(Martin Belanger)
- various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang)
- handle effects after freeing the request (Keith Busch)
- copy firmware_rev on each init (Keith Busch)
- restrict management ioctls to admin (Keith Busch)
- ensure subsystem reset is single threaded (Keith Busch)
- report the actual number of tagset maps in nvme-pci (Keith
Busch)
- small fabrics authentication fixups (Christoph Hellwig)
- add common code for tagset allocation and freeing (Christoph
Hellwig)
- stop using the request_queue in nvmet (Christoph Hellwig)
- set min_align_mask before calculating max_hw_sectors (Rishabh
Bhatnagar)
- send a rediscover uevent when a persistent discovery controller
reconnects (Sagi Grimberg)
- misc nvmet-tcp fixes (Varun Prakash, zhenwei pi)
- MD pull request via Song:
- Various raid5 fix and clean up, by Logan Gunthorpe and David
Sloan.
- Raid10 performance optimization, by Yu Kuai.
- sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu)
- IO scheduler switching quisce fix (Keith)
- s390/dasd block driver updates (Stefan)
- support for recovery for the ublk driver (ZiyangZhang)
- rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph)
- blk-mq and null_blk map fixes (Bart)
- various bcache fixes (Coly, Jilin, Jules)
- nbd signal hang fix (Shigeru)
- block writeback throttling fix (Yu)
- optimize the passthrough mapping handling (me)
- prepare block cgroups to being gendisk based (Christoph)
- get rid of an old PSI hack in the block layer, moving it to the
callers instead where it belongs (Christoph)
- blk-throttle fixes and cleanups (Yu)
- misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj,
Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming,
Miaohe, Bart, Coly, Gaosheng
* tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits)
sbitmap: fix lockup while swapping
block: add rationale for not using blk_mq_plug() when applicable
block: adapt blk_mq_plug() to not plug for writes that require a zone lock
s390/dasd: use blk_mq_alloc_disk
blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
nvmet: don't look at the request_queue in nvmet_bdev_set_limits
nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
blk-mq: use quiesced elevator switch when reinitializing queues
block: replace blk_queue_nowait with bdev_nowait
nvme: remove nvme_ctrl_init_connect_q
nvme-loop: use the tagset alloc/free helpers
nvme-loop: store the generic nvme_ctrl in set->driver_data
nvme-loop: initialize sqsize later
nvme-fc: use the tagset alloc/free helpers
nvme-fc: store the generic nvme_ctrl in set->driver_data
nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
nvme-rdma: use the tagset alloc/free helpers
nvme-rdma: store the generic nvme_ctrl in set->driver_data
nvme-tcp: use the tagset alloc/free helpers
nvme-tcp: store the generic nvme_ctrl in set->driver_data
...
One of the sysfs values reported for supported_speeds was not valid (20Gb/s
reported instead of 64Gb/s). Instead of driver internal speed mask
definition, use speed mask defined in transport_fc for reporting
host->supported_speeds.
Link: https://lore.kernel.org/r/20220927115946.17559-1-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit b6faaaf796 ("scsi: qla2xxx: Serialize mailbox request") serialized
mailbox requests from userspace using the 'optrom' mutex. However, in the
case of DCBX TLV data, if the memory for it is already allocated, then the
mailbox request ends up not being serialized because it is done without
holding the 'optrom' mutex.
Link: https://lore.kernel.org/r/20220926230245.790508-1-rafaelmendsr@gmail.com
Fixes: b6faaaf796 ("scsi: qla2xxx: Serialize mailbox request")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The megasas_dbg_lvl is a driver level parameter. Do not initialize it in
the probe path. Otherwise we will miss the debug print when binding a
new device to the megaraid driver.
Link: https://lore.kernel.org/r/1663145283-4872-6-git-send-email-kanie@linux.alibaba.com
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove memset() of pd_list and ld_ids in megasas_get_device_list().
These lists will be cleared by megasas_host_device_list_query(),
megasas_get_pd_list(), and megasas_ld_list_query().
Link: https://lore.kernel.org/r/1663145283-4872-5-git-send-email-kanie@linux.alibaba.com
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct the error message logged when allocation of ioc_init_request fails.
Link: https://lore.kernel.org/r/1663145283-4872-3-git-send-email-kanie@linux.alibaba.com
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The "id" parameter currently passed to scsi_device_lookup() when removing a
device is incorrect. It should be "ld_target_id %
MEGASAS_MAX_DEV_PER_CHANNEL".
Link: https://lore.kernel.org/r/1663145283-4872-2-git-send-email-kanie@linux.alibaba.com
Fixes: ae6874ba4b ("scsi: megaraid_sas: Early detection of VD deletion through RaidMap update")
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the new blk_rq_map_user_io helper instead of duplicating code at
various places. Additionally this also takes advantage of the on-stack
iov fast path.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220930062749.152261-5-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Everything is just converted to returning RQ_END_IO_NONE, and there
should be no functional changes with this patch.
In preparation for allowing the end_io handler to pass ownership back
to the block layer, rather than retain ownership of the request.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* for-6.1/block: (162 commits)
sbitmap: fix lockup while swapping
block: add rationale for not using blk_mq_plug() when applicable
block: adapt blk_mq_plug() to not plug for writes that require a zone lock
s390/dasd: use blk_mq_alloc_disk
blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
nvmet: don't look at the request_queue in nvmet_bdev_set_limits
nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
blk-mq: use quiesced elevator switch when reinitializing queues
block: replace blk_queue_nowait with bdev_nowait
nvme: remove nvme_ctrl_init_connect_q
nvme-loop: use the tagset alloc/free helpers
nvme-loop: store the generic nvme_ctrl in set->driver_data
nvme-loop: initialize sqsize later
nvme-fc: use the tagset alloc/free helpers
nvme-fc: store the generic nvme_ctrl in set->driver_data
nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
nvme-rdma: use the tagset alloc/free helpers
nvme-rdma: store the generic nvme_ctrl in set->driver_data
nvme-tcp: use the tagset alloc/free helpers
nvme-tcp: store the generic nvme_ctrl in set->driver_data
...
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Three late patches to fix problems discovered recently.
* Add a horkage to disable link power management by default for the
Pioneer BDR-207M and BDR-205 DVD drives (from Niklas).
* 2 patches to fix setting the maximum queue depth of libsas owned ATA
devices (from me).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYzUUjAAKCRDdoc3SxdoY
du6zAQD5X5JGmXppn5alNTFmfvekLj3wDswGgFcYtopZ0XLCrwD+Pf7K+3VVzhsj
IMj45WJe0LlnWeb1J5cCviSrm6lfIwo=
=Udns
-----END PGP SIGNATURE-----
Merge tag 'ata-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fixes from Damien Le Moal:
"Three late patches to fix problems discovered recently:
- Add a horkage to disable link power management by default for the
Pioneer BDR-207M and BDR-205 DVD drives (from Niklas)
- Two patches to fix setting the maximum queue depth of libsas owned
ATA devices (from me)"
* tag 'ata-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-sata: Fix device queue depth control
ata: libata-scsi: Fix initialization of device queue depth
libata: add ATA_HORKAGE_NOLPM for Pioneer BDR-207M and BDR-205
The function __ata_change_queue_depth() uses the helper
ata_scsi_find_dev() to get the ata_device structure of a scsi device and
set that device maximum queue depth. However, when the ata device is
managed by libsas, ata_scsi_find_dev() returns NULL, turning
__ata_change_queue_depth() into a nop, which prevents the user from
setting the maximum queue depth of ATA devices used with libsas based
HBAs.
Fix this by renaming __ata_change_queue_depth() to
ata_change_queue_depth() and adding a pointer to the ata_device
structure of the target device as argument. This pointer is provided by
ata_scsi_change_queue_depth() using ata_scsi_find_dev() in the case of
a libata managed device and by sas_change_queue_depth() using
sas_to_ata_dev() in the case of a libsas managed ata device.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: John Garry <john.garry@huawei.com>
Fix a NULL pointer crash that occurs when we are freeing the socket at the
same time we access it via sysfs.
The problem is that:
1. iscsi_sw_tcp_conn_get_param() and iscsi_sw_tcp_host_get_param() take
the frwd_lock and do sock_hold() then drop the frwd_lock. sock_hold()
does a get on the "struct sock".
2. iscsi_sw_tcp_release_conn() does sockfd_put() which does the last put
on the "struct socket" and that does __sock_release() which sets the
sock->ops to NULL.
3. iscsi_sw_tcp_conn_get_param() and iscsi_sw_tcp_host_get_param() then
call kernel_getpeername() which accesses the NULL sock->ops.
Above we do a get on the "struct sock", but we needed a get on the "struct
socket". Originally, we just held the frwd_lock the entire time but in
commit bcf3a2953d ("scsi: iscsi: iscsi_tcp: Avoid holding spinlock while
calling getpeername()") we switched to refcount based because the network
layer changed and started taking a mutex in that path, so we could no
longer hold the frwd_lock.
Instead of trying to maintain multiple refcounts, this just has us use a
mutex for accessing the socket in the interface code paths.
Link: https://lore.kernel.org/r/20220907221700.10302-1-michael.christie@oracle.com
Fixes: bcf3a2953d ("scsi: iscsi: iscsi_tcp: Avoid holding spinlock while calling getpeername()")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
coccinelle reports a warning:
WARNING: casting value returned by memory allocation function to (struct
mpi3mr_throttle_group_info *) is useless
To fix this, the unnecessary cast is removed.
Link: https://lore.kernel.org/r/Yx+kp8NxHvDHs7dv@playground
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The passthrough structure is declared off of the stack, so it needs to be
set to zero before copied back to userspace to prevent any unintentional
data leakage. Switch things to be statically allocated which will fill the
unused fields with 0 automatically.
Link: https://lore.kernel.org/r/YxrjN3OOw2HHl9tx@kroah.com
Cc: stable@kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: hdthky <hdthky0@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix 'scheduling while atomic' type bug, which is observed when
pci_irq_vector() is called from interrupt context.
Link: https://lore.kernel.org/r/20220912135742.11764-9-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Scan the target devices during system resume time and add or remove the
target device with the SML if the corresponding target device is newly
added or removed respectively.
Link: https://lore.kernel.org/r/20220912135742.11764-8-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Free the enclosure device objects during driver unload and before
rescanning the target devices during controller reset.
Link: https://lore.kernel.org/r/20220912135742.11764-7-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Handle the 0xF003 controller fault code as a special case by marking the
controller as unrecoverable with logging a message indicating the driver
marks the controller as unrecoverable due to the specific fault.
Link: https://lore.kernel.org/r/20220912135742.11764-6-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement graceful handling of surprise or orderly removal of PCIe HBA:
- Detect a hot removal of the controller at certain critical places in the
driver. Early detection will help to reduce the time taken for cleaning
up the hot-removed controller at the driver level.
- Poll the status of the port enable issued after reset once every 5
seconds to avoid a long delay in detecting unavailable controller.
Link: https://lore.kernel.org/r/20220912135742.11764-5-sreekanth.reddy@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In RT kernels, the IRQ handler's code is executed as a kernel
thread. Modify the driver to avoid explicitly scheduling the IRQ kernel
thread.
Link: https://lore.kernel.org/r/20220912135742.11764-4-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch to the new generic PCI power management framework. Also, remove
unnecessary calls to the PCI helper functions (such as
pci_set_power_state(), pci_enable_wake(), pci_save_state(),
pci_restore_state() etc).
Link: https://lore.kernel.org/r/20220912135742.11764-3-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran