The opl3 driver has a debug printk code without proper KERN_ prefix.
On recent kernels, KERN_CONT prefix is mandatory for continued output
lines. Put it properly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the commit 3d774d5ef0 ("ALSA: seq: Allow the tristate build of
OSS emulation") we changed CONFIG_SND_SEQUENCER_OSS to tristate, but a
couple of places were forgotten, namely, opl3 and emux Makefile.
These contain the line like
snd-opl3-synth-$(CONFIG_SND_SEQUENCER_OSS) += opl3_oss.o
and this doesn't work any longer as expected because snd-opl3-synth
can be built-in while CONFIG_SND_SEQUENCER_OSS=m.
This patch fixes these places to build properly for the new kconfig
dependency. In the end, we had to use ifneq() to satisfy the
requirement. It's a bit ugly, but lesser evil.
Fixes: 3d774d5ef0 ("ALSA: seq: Allow the tristate build of OSS emulation")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many drivers bind the sequencer stuff in off-load by another driver
module, so that it's loaded only on demand. In the current code, this
mechanism doesn't work when the driver is built-in while the sequencer
is module. We check with IS_REACHABLE() and enable only when the
sequencer is in the same level of build.
However, this is basically a overshoot. The binder code
(snd-seq-device) is an individual module from the sequencer core
(snd-seq), and we just have to make the former a built-in while
keeping the latter a module for allowing the scenario like the above.
This patch achieves that by rewriting Kconfig slightly. Now, a driver
that provides the manual sequencer device binding should select
CONFIG_SND_SEQ_DEVICE in a way as
select SND_SEQ_DEVICE if SND_SEQUENCER != n
Note that the "!=n" is needed here to avoid the influence of the
sequencer core is module while the driver is built-in.
Also, since rawmidi.o may be linked with snd_seq_device.o when
built-in, we have to shuffle the code to make the linker happy.
(the kernel linker isn't smart enough yet to handle such a case.)
That is, snd_seq_device.c is moved to sound/core from sound/core/seq,
as well as Makefile.
Last but not least, the patch replaces the code using IS_REACHABLE()
with IS_ENABLED(), since now the condition meets always when enabled.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently OSS sequencer emulation is tied with ALSA sequencer core,
both are built in the same level; i.e. when CONFIG_SND_SEQUENCER=y,
the OSS sequencer emulation is also always built-in, even though the
functionality can be built as an individual module.
This patch changes the rule and allows users to build snd-seq-oss
module while others are built-in. Essentially, it's just a few simple
changes in Kconfig and Makefile. Some driver codes like opl3 need to
convert from the simple ifdef to IS_ENABLED(). But that's all.
You might wonder how about the dependency: right, it can be messy, but
it still works. Since we rewrote the sequencer binding with the
standard bus, the driver can be bound at any time on demand. So, the
synthesizer driver module can be loaded individually from the OSS
emulation core before/after it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_enter_user() and snd_leave_user() that call set_fs() are the dead
code in opl3 driver. Let's rip them off.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a missing lower bound check on "pitchbend" so it means we can
read up to 6 elements before the start of the opl3_note_table[] array.
Thanks to Clemens Ladisch for his help with this patch.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch moves the driver object initialization and allocation to
each driver's module init/exit code like other normal drivers. The
snd_seq_driver struct is now published in seq_device.h, and each
driver is responsible to define it with proper driver attributes
(name, probe and remove) with snd_seq_driver specific attributes as id
and argsize fields. The helper functions snd_seq_driver_register(),
snd_seq_driver_unregister() and module_snd_seq_driver() are used for
simplifying codes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The last argument, name, of snd_oss_register_device() is nowhere
referred in the function in the current code. Let's drop it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace the lengthy #if defined(XXX) || defined(XXX_MODULE) with the
new IS_ENABLED() macro.
The patch still doesn't cover all ifdefs. For example, the dependency
on CONFIG_GAMEPORT is still open-coded because this also has an extra
dependency on MODULE. Similarly, an open-coded ifdef in pcm_oss.c and
some sequencer-related stuff are left untouched.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@r1@
statement S;
position p,p1;
@@
S@p1;@p
@script:python r2@
p << r1.p;
p1 << r1.p1;
@@
if p[0].line != p1[0].line_end:
cocci.include_match(False)
@@
position r1.p;
@@
-;@p
// </smpl>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
module_param(bool) used to counter-intuitively take an int. In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.
It's time to remove the int/unsigned int option. For this version
it'll simply give a warning, but it'll break next kernel version.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These aren't modules, but they do make use of these macros, so
they will need export.h to get that definition. Previously,
they got it via the implicit module.h inclusion.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Lots of sound drivers were getting module.h via the implicit presence
of it in <linux/device.h> but we are going to clean that up. So
fix up those users now.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Instead of mangling the CONFIG_* variables in the makefiles over and
over, set a few helper variables in Kconfig.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Kill snd_assert() in other places, either removed or replaced with
if () with snd_BUG_ON().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add proper ifdef's to the patch loading code moved from the old instr
layer so that opl3 driver can be compiled without the sequencer support.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the exclusive access lock in hwdep instead of the own one.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Use the hwdep device for loading OPL2/3 patch data instead of the
messy sequencer instrument layer.
Due to this change, the sbiload program should be updated, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Fix the various misspellings of "system", controller", "interrupt" and
"[un]necessary".
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Clean up Makefile using xxx- style instead of
ifeq(CONFIG_XXX,y).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Add four new information flags SNDRV_SEQ_PORT_TYPE_HARDWARE, _SOFTWARE,
_SYNTHESIZER, _PORT for sequencer ports. This makes it easier for apps
like Rosegarden to make policy decisions based on the port type.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Fix the port information about non-MIDI messages that had wrong values
for some OPL3 and EmuX ports.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Modules: OPL3
Don't read from free'd memory. Also make use of the return
value, and don't register the device if something went wrong
creating the port.
Coverity #954, #955
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove snd_device_free() for an opl3-oss instance which should have been
released.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
All users of snd_seq_create_kernel_client() have to set the client name
anyway, so we can just pass the name as parameter. This relieves us
from having to muck around with a struct snd_seq_client_info in these
cases.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
The fields of struct snd_seq_client_callback either aren't used or are
always set to the same value, so we can get rid of it altogether.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
- Remove vmalloc wrapper
- Add release_and_free_resource() to remove kfree_nocheck() from each driver
and simplify the code
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Takashi Iwai