Pull EFI updates from Ingo Molnar:
"The EFI changes in this cycle are much larger than usual, for two
(positive) reasons:
- The GRUB project is showing signs of life again, resulting in the
introduction of the generic Linux/UEFI boot protocol, instead of
x86 specific hacks which are increasingly difficult to maintain.
There's hope that all future extensions will now go through that
boot protocol.
- Preparatory work for RISC-V EFI support.
The main changes are:
- Boot time GDT handling changes
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file
I/O, memory allocation, etc.
- Introduce a generic initrd loading method based on calling back
into the firmware, instead of relying on the x86 EFI handover
protocol or device tree.
- Introduce a mixed mode boot method that does not rely on the x86
EFI handover protocol either, and could potentially be adopted by
other architectures (if another one ever surfaces where one
execution mode is a superset of another)
- Clean up the contents of 'struct efi', and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit
firmware implementations to return EFI_UNSUPPORTED from UEFI
runtime services at OS runtime, and expose a mask of which ones are
supported or unsupported via a configuration table.
- Partial fix for the lack of by-VA cache maintenance in the
decompressor on 32-bit ARM.
- Changes to load device firmware from EFI boot service memory
regions
- Various documentation updates and minor code cleanups and fixes"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
efi/libstub/arm: Fix spurious message that an initrd was loaded
efi/libstub/arm64: Avoid image_base value from efi_loaded_image
partitions/efi: Fix partition name parsing in GUID partition entry
efi/x86: Fix cast of image argument
efi/libstub/x86: Use ULONG_MAX as upper bound for all allocations
efi: Fix a mistype in comments mentioning efivar_entry_iter_begin()
efi/libstub: Avoid linking libstub/lib-ksyms.o into vmlinux
efi/x86: Preserve %ebx correctly in efi_set_virtual_address_map()
efi/x86: Ignore the memory attributes table on i386
efi/x86: Don't relocate the kernel unless necessary
efi/x86: Remove extra headroom for setup block
efi/x86: Add kernel preferred address to PE header
efi/x86: Decompress at start of PE image load address
x86/boot/compressed/32: Save the output address instead of recalculating it
efi/libstub/x86: Deal with exit() boot service returning
x86/boot: Use unsigned comparison for addresses
efi/x86: Avoid using code32_start
efi/x86: Make efi32_pe_entry() more readable
efi/x86: Respect 32-bit ABI in efi32_pe_entry()
efi/x86: Annotate the LOADED_IMAGE_PROTOCOL_GUID with SYM_DATA
...
-----BEGIN PGP SIGNATURE-----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=6Glq
-----END PGP SIGNATURE-----
Merge tag 'for-5.7/block-2020-03-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Online capacity resizing (Balbir)
- Number of hardware queue change fixes (Bart)
- null_blk fault injection addition (Bart)
- Cleanup of queue allocation, unifying the node/no-node API
(Christoph)
- Cleanup of genhd, moving code to where it makes sense (Christoph)
- Cleanup of the partition handling code (Christoph)
- disk stat fixes/improvements (Konstantin)
- BFQ improvements (Paolo)
- Various fixes and improvements
* tag 'for-5.7/block-2020-03-29' of git://git.kernel.dk/linux-block: (72 commits)
block: return NULL in blk_alloc_queue() on error
block: move bio_map_* to blk-map.c
Revert "blkdev: check for valid request queue before issuing flush"
block: simplify queue allocation
bcache: pass the make_request methods to blk_queue_make_request
null_blk: use blk_mq_init_queue_data
block: add a blk_mq_init_queue_data helper
block: move the ->devnode callback to struct block_device_operations
block: move the part_stat* helpers from genhd.h to a new header
block: move block layer internals out of include/linux/genhd.h
block: move guard_bio_eod to bio.c
block: unexport get_gendisk
block: unexport disk_map_sector_rcu
block: unexport disk_get_part
block: mark part_in_flight and part_in_flight_rw static
block: mark block_depr static
block: factor out requeue handling from dispatch code
block/diskstats: replace time_in_queue with sum of request times
block/diskstats: accumulate all per-cpu counters in one pass
block/diskstats: more accurate approximation of io_ticks for slow disks
...
This patch fixes follwoing warning:
block/blk-core.c: In function ‘blk_alloc_queue’:
block/blk-core.c:558:10: warning: returning ‘int’ from a function with return type ‘struct request_queue *’ makes pointer from integer without a cast [-Wint-conversion]
return -EINVAL;
Fixes: 3d745ea5b0 ("block: simplify queue allocation")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to stringify the zone conditions. We use this helper in the
next patch to track zone conditions in tracepoints.
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The bio_map_* helpers are just the low-level helpers for the
blk_rq_map_* APIs. Move them together for better logical grouping,
as no there isn't much overlap with other code in bio.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit f10d9f617a.
We can't have queues without a make_request_fn any more (and the
loop device uses blk-mq these days anyway..).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current make_request based drivers use either blk_alloc_queue_node or
blk_alloc_queue to allocate a queue, and then set up the make_request_fn
function pointer and a few parameters using the blk_queue_make_request
helper. Simplify this by passing the make_request pointer to
blk_alloc_queue, and while at it merge the _node variant into the main
helper by always passing a node_id, and remove the superfluous gfp_mask
parameter. A lower-level __blk_alloc_queue is kept for the blk-mq case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This allows a driver to pass a queuedata member before ->init_hctx is
called. null_blk currently open codes this logic, but I'd rather have
it in the core to ease future maintainance.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There really isn't any good reason to stash a method directly into
struct gendisk. Move it together with the other block device
operations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These macros are just used by a few files. Move them out of genhd.h,
which is included everywhere into a new standalone header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is bio layer functionality and not related to buffer heads.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out the requeue handling from the dispatch code, this will make
subsequent addition of different requeueing schemes easier.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Column "time_in_queue" in diskstats is supposed to show total waiting time
of all requests. I.e. value should be equal to the sum of times from other
columns. But this is not true, because column "time_in_queue" is counted
separately in jiffies rather than in nanoseconds as other times.
This patch removes redundant counter for "time_in_queue" and shows total
time of read, write, discard and flush requests.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently io_ticks is approximated by adding one at each start and end of
requests if jiffies counter has changed. This works perfectly for requests
shorter than a jiffy or if one of requests starts/ends at each jiffy.
If disk executes just one request at a time and they are longer than two
jiffies then only first and last jiffies will be accounted.
Fix is simple: at the end of request add up into io_ticks jiffies passed
since last update rather than just one jiffy.
Example: common HDD executes random read 4k requests around 12ms.
fio --name=test --filename=/dev/sdb --rw=randread --direct=1 --runtime=30 &
iostat -x 10 sdb
Note changes of iostat's "%util" 8,43% -> 99,99% before/after patch:
Before:
Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util
sdb 0,00 0,00 82,60 0,00 330,40 0,00 8,00 0,96 12,09 12,09 0,00 1,02 8,43
After:
Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util
sdb 0,00 0,00 82,50 0,00 330,00 0,00 8,00 1,00 12,10 12,10 0,00 12,12 99,99
Now io_ticks does not loose time between start and end of requests, but
for queue-depth > 1 some I/O time between adjacent starts might be lost.
For load estimation "%util" is not as useful as average queue length,
but it clearly shows how often disk queue is completely empty.
Fixes: 5b18b5a737 ("block: delete part_round_stats and switch to less precise counting")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge block/partition-generic.c and block/partitions/check.c into
a single block/partitions/core.c as the content is closely related
and both files are tiny.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All these are just used in block/partitions/msdos.c, so move them out of the
genhd.h driver included by every driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just always use NEW_SOLARIS_X86_PARTITION and explain the situation,
as that is less confusing than two names for a single value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The enum containing the *_PARTITION symbolic names is only relevant
for the partition parser. More specifically most values are MSDOS
partition table system indicators and thus should go straight into
msdos.c. One value is only used by the sun partition parser, and the
sun and sgi partition parsers use the same value as the x86 Linux
RAID indicator to also indicate RAID autodetection. Duplicate them
in sun.c and sgi.c given that the different partition types use
entirely different values otherwise.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
struct partition is the on-disk format of a MSDOS partition table entry.
Move it out of genhd.h into a new msdos_partition.h header and give it
a msdos_ prefix to avoid confusion.
Also move the magic number from block/partitions/msdos.h to the new
header so that it can be used by the SCSI drivers looking at the DOS
partition tables.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no good reason to include one header per partition type in
core.c. Instead move the prototypes for the detection routins to
check.h, and remove all now empty headers in block/partitions/.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The warn_no_part is initialized to 1 and never changed. Remove
it and execute the code keyed off from it unconditionally.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new include/linux/raid/detect.h header to declare the
md_autodetect_dev prototype which can be shared between md and
the partition code. Then use IS_BUILTIN to call it instead of the
ifdef magic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
read_dev_sector and put_dev_sector are now only used by the partition
parsing code. Remove the export for read_dev_sector and merge it into
the only caller. Clean the mess up a bit by using goto labels and
the SECTOR_SHIFT constant.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There isn't any good reason not to simply open code the allocation and
freeing of the partition_meta_info structure. Especially as one of
the branches in alloc_part_info is entirely dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the sysfs _show methods that are used both on the full disk and
partition nodes to genhd.c instead of hiding them in the partitioning
code. Also move the declaration for these methods to block/blk.h so
that we don't expose them to drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Thes functions aren't really related to partition support, so move them
to a more suitable place.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no good reason for __bdevname to exist. Just open code
printing the string in the callers. For three of them the format
string can be trivially merged into existing printk statements,
and in init/do_mounts.c we can at least do the scnprintf once at
the start of the function, and unconditional of CONFIG_BLOCK to
make the output for tiny configfs a little more helpful.
Acked-by: Theodore Ts'o <tytso@mit.edu> # for ext4
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This function is only used by init/do_mounts.c, which can't be modular.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In bfq_pd_offline(), the function bfq_flush_idle_tree() is invoked to
flush the rb tree that contains all idle entities belonging to the pd
(cgroup) being destroyed. In particular, bfq_flush_idle_tree() is
invoked before bfq_reparent_active_queues(). Yet the latter may happen
to add some entities to the idle tree. It happens if, in some of the
calls to bfq_bfqq_move() performed by bfq_reparent_active_queues(),
the queue to move is empty and gets expired.
This commit simply reverses the invocation order between
bfq_flush_idle_tree() and bfq_reparent_active_queues().
Tested-by: cki-project@redhat.com
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bfq_reparent_leaf_entity() reparents the input leaf entity (a leaf
entity represents just a bfq_queue in an entity tree). Yet, the input
entity is guaranteed to always be a leaf entity only in two-level
entity trees. In this respect, because of the error fixed by
commit 14afc59361 ("block, bfq: fix overwrite of bfq_group pointer
in bfq_find_set_group()"), all (wrongly collapsed) entity trees happened
to actually have only two levels. After the latter commit, this does not
hold any longer.
This commit fixes this problem by modifying
bfq_reparent_leaf_entity(), so that it searches an active leaf entity
down the path that stems from the input entity. Such a leaf entity is
guaranteed to exist when bfq_reparent_leaf_entity() is invoked.
Tested-by: cki-project@redhat.com
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A bfq_put_queue() may be invoked in __bfq_bic_change_cgroup(). The
goal of this put is to release a process reference to a bfq_queue. But
process-reference releases may trigger also some extra operation, and,
to this goal, are handled through bfq_release_process_ref(). So, turn
the invocation of bfq_put_queue() into an invocation of
bfq_release_process_ref().
Tested-by: cki-project@redhat.com
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit ecedd3d7e1 ("block, bfq: get extra ref to prevent a queue
from being freed during a group move") gets an extra reference to a
bfq_queue before possibly deactivating it (temporarily), in
bfq_bfqq_move(). This prevents the bfq_queue from disappearing before
being reactivated in its new group.
Yet, the bfq_queue may also be expired (i.e., its service may be
stopped) before the bfq_queue is deactivated. And also an expiration
may lead to a premature freeing. This commit fixes this issue by
simply moving forward the getting of the extra reference already
introduced by commit ecedd3d7e1 ("block, bfq: get extra ref to
prevent a queue from being freed during a group move").
Reported-by: cki-project@redhat.com
Tested-by: cki-project@redhat.com
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In bfq_idle_slice_timer func, bfqq = bfqd->in_service_queue is
not in bfqd-lock critical section. The bfqq, which is not
equal to NULL in bfq_idle_slice_timer, may be freed after passing
to bfq_idle_slice_timer_body. So we will access the freed memory.
In addition, considering the bfqq may be in race, we should
firstly check whether bfqq is in service before doing something
on it in bfq_idle_slice_timer_body func. If the bfqq in race is
not in service, it means the bfqq has been expired through
__bfq_bfqq_expire func, and wait_request flags has been cleared in
__bfq_bfqd_reset_in_service func. So we do not need to re-clear the
wait_request of bfqq which is not in service.
KASAN log is given as follows:
[13058.354613] ==================================================================
[13058.354640] BUG: KASAN: use-after-free in bfq_idle_slice_timer+0xac/0x290
[13058.354644] Read of size 8 at addr ffffa02cf3e63f78 by task fork13/19767
[13058.354646]
[13058.354655] CPU: 96 PID: 19767 Comm: fork13
[13058.354661] Call trace:
[13058.354667] dump_backtrace+0x0/0x310
[13058.354672] show_stack+0x28/0x38
[13058.354681] dump_stack+0xd8/0x108
[13058.354687] print_address_description+0x68/0x2d0
[13058.354690] kasan_report+0x124/0x2e0
[13058.354697] __asan_load8+0x88/0xb0
[13058.354702] bfq_idle_slice_timer+0xac/0x290
[13058.354707] __hrtimer_run_queues+0x298/0x8b8
[13058.354710] hrtimer_interrupt+0x1b8/0x678
[13058.354716] arch_timer_handler_phys+0x4c/0x78
[13058.354722] handle_percpu_devid_irq+0xf0/0x558
[13058.354731] generic_handle_irq+0x50/0x70
[13058.354735] __handle_domain_irq+0x94/0x110
[13058.354739] gic_handle_irq+0x8c/0x1b0
[13058.354742] el1_irq+0xb8/0x140
[13058.354748] do_wp_page+0x260/0xe28
[13058.354752] __handle_mm_fault+0x8ec/0x9b0
[13058.354756] handle_mm_fault+0x280/0x460
[13058.354762] do_page_fault+0x3ec/0x890
[13058.354765] do_mem_abort+0xc0/0x1b0
[13058.354768] el0_da+0x24/0x28
[13058.354770]
[13058.354773] Allocated by task 19731:
[13058.354780] kasan_kmalloc+0xe0/0x190
[13058.354784] kasan_slab_alloc+0x14/0x20
[13058.354788] kmem_cache_alloc_node+0x130/0x440
[13058.354793] bfq_get_queue+0x138/0x858
[13058.354797] bfq_get_bfqq_handle_split+0xd4/0x328
[13058.354801] bfq_init_rq+0x1f4/0x1180
[13058.354806] bfq_insert_requests+0x264/0x1c98
[13058.354811] blk_mq_sched_insert_requests+0x1c4/0x488
[13058.354818] blk_mq_flush_plug_list+0x2d4/0x6e0
[13058.354826] blk_flush_plug_list+0x230/0x548
[13058.354830] blk_finish_plug+0x60/0x80
[13058.354838] read_pages+0xec/0x2c0
[13058.354842] __do_page_cache_readahead+0x374/0x438
[13058.354846] ondemand_readahead+0x24c/0x6b0
[13058.354851] page_cache_sync_readahead+0x17c/0x2f8
[13058.354858] generic_file_buffered_read+0x588/0xc58
[13058.354862] generic_file_read_iter+0x1b4/0x278
[13058.354965] ext4_file_read_iter+0xa8/0x1d8 [ext4]
[13058.354972] __vfs_read+0x238/0x320
[13058.354976] vfs_read+0xbc/0x1c0
[13058.354980] ksys_read+0xdc/0x1b8
[13058.354984] __arm64_sys_read+0x50/0x60
[13058.354990] el0_svc_common+0xb4/0x1d8
[13058.354994] el0_svc_handler+0x50/0xa8
[13058.354998] el0_svc+0x8/0xc
[13058.354999]
[13058.355001] Freed by task 19731:
[13058.355007] __kasan_slab_free+0x120/0x228
[13058.355010] kasan_slab_free+0x10/0x18
[13058.355014] kmem_cache_free+0x288/0x3f0
[13058.355018] bfq_put_queue+0x134/0x208
[13058.355022] bfq_exit_icq_bfqq+0x164/0x348
[13058.355026] bfq_exit_icq+0x28/0x40
[13058.355030] ioc_exit_icq+0xa0/0x150
[13058.355035] put_io_context_active+0x250/0x438
[13058.355038] exit_io_context+0xd0/0x138
[13058.355045] do_exit+0x734/0xc58
[13058.355050] do_group_exit+0x78/0x220
[13058.355054] __wake_up_parent+0x0/0x50
[13058.355058] el0_svc_common+0xb4/0x1d8
[13058.355062] el0_svc_handler+0x50/0xa8
[13058.355066] el0_svc+0x8/0xc
[13058.355067]
[13058.355071] The buggy address belongs to the object at ffffa02cf3e63e70#012 which belongs to the cache bfq_queue of size 464
[13058.355075] The buggy address is located 264 bytes inside of#012 464-byte region [ffffa02cf3e63e70, ffffa02cf3e64040)
[13058.355077] The buggy address belongs to the page:
[13058.355083] page:ffff7e80b3cf9800 count:1 mapcount:0 mapping:ffff802db5c90780 index:0xffffa02cf3e606f0 compound_mapcount: 0
[13058.366175] flags: 0x2ffffe0000008100(slab|head)
[13058.370781] raw: 2ffffe0000008100 ffff7e80b53b1408 ffffa02d730c1c90 ffff802db5c90780
[13058.370787] raw: ffffa02cf3e606f0 0000000000370023 00000001ffffffff 0000000000000000
[13058.370789] page dumped because: kasan: bad access detected
[13058.370791]
[13058.370792] Memory state around the buggy address:
[13058.370797] ffffa02cf3e63e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb
[13058.370801] ffffa02cf3e63e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370805] >ffffa02cf3e63f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370808] ^
[13058.370811] ffffa02cf3e63f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370815] ffffa02cf3e64000: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[13058.370817] ==================================================================
[13058.370820] Disabling lock debugging due to kernel taint
Here, we directly pass the bfqd to bfq_idle_slice_timer_body func.
--
V2->V3: rewrite the comment as suggested by Paolo Valente
V1->V2: add one comment, and add Fixes and Reported-by tag.
Fixes: aee69d78d ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler")
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Reported-by: Wang Wang <wangwang2@huawei.com>
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Feilong Lin <linfeilong@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allow block/genhd to notify user space (via udev) about disk size changes
using a new helper set_capacity_revalidate_and_notify(), which is a wrapper
on top of set_capacity(). set_capacity_revalidate_and_notify() will only
notify via udev if the current capacity or the target capacity is not zero
and iff the capacity changes.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Someswarudu Sangaraju <ssomesh@amazon.com>
Signed-off-by: Balbir Singh <sblbir@amazon.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
submit_bio_wait() can be called from ioctl(BLKSECDISCARD), which
may take long time to complete, as Salman mentioned, 4K BLKSECDISCARD
takes up to 100 second on some devices. Also any block I/O operation
that occurs after the BLKSECDISCARD is submitted will also potentially
be affected by the hung task timeouts.
Another report is that task hang can be observed when running mkfs
over raid10 which takes a small max discard sectors limit because
of chunk size.
So prevent hung_check from firing by taking same approach used
in blk_execute_rq(), and the wake-up interval is set as half the
hung_check timer period, which keeps overhead low enough.
Cc: Salman Qazi <sqazi@google.com>
Cc: Jesse Barnes <jsbarnes@google.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Link: https://lkml.org/lkml/2020/2/12/1193
Reported-by: Salman Qazi <sqazi@google.com>
Reviewed-by: Jesse Barnes <jsbarnes@google.com>
Reviewed-by: Salman Qazi <sqazi@google.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Field bdi->io_pages added in commit 9491ae4aad ("mm: don't cap request
size based on read-ahead setting") removes unneeded split of read requests.
Stacked drivers do not call blk_queue_max_hw_sectors(). Instead they set
limits of their devices by blk_set_stacking_limits() + disk_stack_limits().
Field bio->io_pages stays zero until user set max_sectors_kb via sysfs.
This patch updates io_pages after merging limits in disk_stack_limits().
Commit c6d6e9b0f6 ("dm: do not allow readahead to limit IO size") fixed
the same problem for device-mapper devices, this one fixes MD RAIDs.
Fixes: 9491ae4aad ("mm: don't cap request size based on read-ahead setting")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Song Liu <songliubraving@fb.com>
Linus Torvalds