Commit Graph

314 Commits

Author SHA1 Message Date
Linus Torvalds 27efed3e83 Merge branch 'core-watchdog-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull watchddog clean-up and fixes from Thomas Gleixner:
 "The watchdog (hard/softlockup detector) code is pretty much broken in
  its current state. The patch series addresses this by removing all
  duct tape and refactoring it into a workable state.

  The reasons why I ask for inclusion that late in the cycle are:

   1) The code causes lockdep splats vs. hotplug locking which get
      reported over and over. Unfortunately there is no easy fix.

   2) The risk of breakage is minimal because it's already broken

   3) As 4.14 is a long term stable kernel, I prefer to have working
      watchdog code in that and the lockdep issues resolved. I wouldn't
      ask you to pull if 4.14 wouldn't be a LTS kernel or if the
      solution would be easy to backport.

   4) The series was around before the merge window opened, but then got
      delayed due to the UP failure caused by the for_each_cpu()
      surprise which we discussed recently.

  Changes vs. V1:

   - Addressed your review points

   - Addressed the warning in the powerpc code which was discovered late

   - Changed two function names which made sense up to a certain point
     in the series. Now they match what they do in the end.

   - Fixed a 'unused variable' warning, which got not detected by the
     intel robot. I triggered it when trying all possible related config
     combinations manually. Randconfig testing seems not random enough.

  The changes have been tested by and reviewed by Don Zickus and tested
  and acked by Micheal Ellerman for powerpc"

* 'core-watchdog-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  watchdog/core: Put softlockup_threads_initialized under ifdef guard
  watchdog/core: Rename some softlockup_* functions
  powerpc/watchdog: Make use of watchdog_nmi_probe()
  watchdog/core, powerpc: Lock cpus across reconfiguration
  watchdog/core, powerpc: Replace watchdog_nmi_reconfigure()
  watchdog/hardlockup/perf: Fix spelling mistake: "permanetely" -> "permanently"
  watchdog/hardlockup/perf: Cure UP damage
  watchdog/hardlockup: Clean up hotplug locking mess
  watchdog/hardlockup/perf: Simplify deferred event destroy
  watchdog/hardlockup/perf: Use new perf CPU enable mechanism
  watchdog/hardlockup/perf: Implement CPU enable replacement
  watchdog/hardlockup/perf: Implement init time detection of perf
  watchdog/hardlockup/perf: Implement init time perf validation
  watchdog/core: Get rid of the racy update loop
  watchdog/core, powerpc: Make watchdog_nmi_reconfigure() two stage
  watchdog/sysctl: Clean up sysctl variable name space
  watchdog/sysctl: Get rid of the #ifdeffery
  watchdog/core: Clean up header mess
  watchdog/core: Further simplify sysctl handling
  watchdog/core: Get rid of the thread teardown/setup dance
  ...
2017-10-06 08:36:41 -07:00
Peter Zijlstra 1db49484f2 smp/hotplug: Hotplug state fail injection
Add a sysfs file to one-time fail a specific state. This can be used
to test the state rollback code paths.

Something like this (hotplug-up.sh):

  #!/bin/bash

  echo 0 > /debug/sched_debug
  echo 1 > /debug/tracing/events/cpuhp/enable

  ALL_STATES=`cat /sys/devices/system/cpu/hotplug/states | cut -d':' -f1`
  STATES=${1:-$ALL_STATES}

  for state in $STATES
  do
	  echo 0 > /sys/devices/system/cpu/cpu1/online
	  echo 0 > /debug/tracing/trace
	  echo Fail state: $state
	  echo $state > /sys/devices/system/cpu/cpu1/hotplug/fail
	  cat /sys/devices/system/cpu/cpu1/hotplug/fail
	  echo 1 > /sys/devices/system/cpu/cpu1/online

	  cat /debug/tracing/trace > hotfail-${state}.trace

	  sleep 1
  done

Can be used to test for all possible rollback (barring multi-instance)
scenarios on CPU-up, CPU-down is a trivial modification of the above.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: bigeasy@linutronix.de
Cc: efault@gmx.de
Cc: rostedt@goodmis.org
Cc: max.byungchul.park@gmail.com
Link: https://lkml.kernel.org/r/20170920170546.972581715@infradead.org
2017-09-25 22:11:44 +02:00
Peter Zijlstra 5ebe7742ff smp/hotplug: Differentiate the AP completion between up and down
With lockdep-crossrelease we get deadlock reports that span cpu-up and
cpu-down chains. Such deadlocks cannot possibly happen because cpu-up
and cpu-down are globally serialized.

  takedown_cpu()
    irq_lock_sparse()
    wait_for_completion(&st->done)

                                cpuhp_thread_fun
                                  cpuhp_up_callback
                                    cpuhp_invoke_callback
                                      irq_affinity_online_cpu
                                        irq_local_spare()
                                        irq_unlock_sparse()
                                  complete(&st->done)

Now that we have consistent AP state, we can trivially separate the
AP completion between up and down using st->bringup.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: max.byungchul.park@gmail.com
Cc: bigeasy@linutronix.de
Cc: efault@gmx.de
Cc: rostedt@goodmis.org
Link: https://lkml.kernel.org/r/20170920170546.872472799@infradead.org
2017-09-25 22:11:43 +02:00
Peter Zijlstra 5f4b55e106 smp/hotplug: Differentiate the AP-work lockdep class between up and down
With lockdep-crossrelease we get deadlock reports that span cpu-up and
cpu-down chains. Such deadlocks cannot possibly happen because cpu-up
and cpu-down are globally serialized.

  CPU0                  CPU1                    CPU2
  cpuhp_up_callbacks:   takedown_cpu:           cpuhp_thread_fun:

  cpuhp_state
                        irq_lock_sparse()
    irq_lock_sparse()
                        wait_for_completion()
                                                cpuhp_state
                                                complete()

Now that we have consistent AP state, we can trivially separate the
AP-work class between up and down using st->bringup.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: max.byungchul.park@gmail.com
Cc: bigeasy@linutronix.de
Cc: efault@gmx.de
Cc: rostedt@goodmis.org
Link: https://lkml.kernel.org/r/20170920170546.922524234@infradead.org
2017-09-25 22:11:43 +02:00
Peter Zijlstra 724a86881d smp/hotplug: Callback vs state-machine consistency
While the generic callback functions have an 'int' return and thus
appear to be allowed to return error, this is not true for all states.

Specifically, what used to be STARTING/DYING are ran with IRQs
disabled from critical parts of CPU bringup/teardown and are not
allowed to fail. Add WARNs to enforce this rule.

But since some callbacks are indeed allowed to fail, we have the
situation where a state-machine rollback encounters a failure, in this
case we're stuck, we can't go forward and we can't go back. Also add a
WARN for that case.

AFAICT this is a fundamental 'problem' with no real obvious solution.
We want the 'prepare' callbacks to allow failure on either up or down.
Typically on prepare-up this would be things like -ENOMEM from
resource allocations, and the typical usage in prepare-down would be
something like -EBUSY to avoid CPUs being taken away.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: bigeasy@linutronix.de
Cc: efault@gmx.de
Cc: rostedt@goodmis.org
Cc: max.byungchul.park@gmail.com
Link: https://lkml.kernel.org/r/20170920170546.819539119@infradead.org
2017-09-25 22:11:43 +02:00
Peter Zijlstra 4dddfb5faa smp/hotplug: Rewrite AP state machine core
There is currently no explicit state change on rollback. That is,
st->bringup, st->rollback and st->target are not consistent when doing
the rollback.

Rework the AP state handling to be more coherent. This does mean we
have to do a second AP kick-and-wait for rollback, but since rollback
is the slow path of a slowpath, this really should not matter.

Take this opportunity to simplify the AP thread function to only run a
single callback per invocation. This unifies the three single/up/down
modes is supports. The looping it used to do for up/down are achieved
by retaining should_run and relying on the main smpboot_thread_fn()
loop.

(I have most of a patch that does the same for the BP state handling,
but that's not critical and gets a little complicated because
CPUHP_BRINGUP_CPU does the AP handoff from a callback, which gets
recursive @st usage, I still have de-fugly that.)

[ tglx: Move cpuhp_down_callbacks() et al. into the HOTPLUG_CPU section to
  	avoid gcc complaining about unused functions. Make the HOTPLUG_CPU
  	one piece instead of having two consecutive ifdef sections of the
  	same type. ]

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: bigeasy@linutronix.de
Cc: efault@gmx.de
Cc: rostedt@goodmis.org
Cc: max.byungchul.park@gmail.com
Link: https://lkml.kernel.org/r/20170920170546.769658088@infradead.org
2017-09-25 22:11:42 +02:00
Peter Zijlstra 96abb96854 smp/hotplug: Allow external multi-instance rollback
Currently the rollback of multi-instance states is handled inside
cpuhp_invoke_callback(). The problem is that when we want to allow an
explicit state change for rollback, we need to return from the
function without doing the rollback.

Change cpuhp_invoke_callback() to optionally return the multi-instance
state, such that rollback can be done from a subsequent call.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: bigeasy@linutronix.de
Cc: efault@gmx.de
Cc: rostedt@goodmis.org
Cc: max.byungchul.park@gmail.com
Link: https://lkml.kernel.org/r/20170920170546.720361181@infradead.org
2017-09-25 22:11:42 +02:00
Thomas Gleixner 941154bd69 watchdog/hardlockup/perf: Prevent CPU hotplug deadlock
The following deadlock is possible in the watchdog hotplug code:

  cpus_write_lock()
    ...
      takedown_cpu()
        smpboot_park_threads()
          smpboot_park_thread()
            kthread_park()
              ->park() := watchdog_disable()
                watchdog_nmi_disable()
                  perf_event_release_kernel();
                    put_event()
                      _free_event()
                        ->destroy() := hw_perf_event_destroy()
                          x86_release_hardware()
                            release_ds_buffers()
                              get_online_cpus()

when a per cpu watchdog perf event is destroyed which drops the last
reference to the PMU hardware. The cleanup code there invokes
get_online_cpus() which instantly deadlocks because the hotplug percpu
rwsem is write locked.

To solve this add a deferring mechanism:

  cpus_write_lock()
			   kthread_park()
			    watchdog_nmi_disable(deferred)
			      perf_event_disable(event);
			      move_event_to_deferred(event);
			   ....
  cpus_write_unlock()
  cleaup_deferred_events()
    perf_event_release_kernel()

This is still properly serialized against concurrent hotplug via the
cpu_add_remove_lock, which is held by the task which initiated the hotplug
event.

This is also used to handle event destruction when the watchdog threads are
parked via other mechanisms than CPU hotplug.

Analyzed-by: Peter Zijlstra <peterz@infradead.org>

Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194146.884469246@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-14 11:41:05 +02:00
Linus Torvalds d725c7ac8b Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Thomas Gleixner:
 "A single fix to handle the removal of the first dynamic CPU hotplug
  state correctly"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  smp/hotplug: Handle removal correctly in cpuhp_store_callbacks()
2017-09-04 13:53:53 -07:00
Paul E. McKenney a58163d8ca rcu: Migrate callbacks earlier in the CPU-offline timeline
RCU callbacks must be migrated away from an outgoing CPU, and this is
done near the end of the CPU-hotplug operation, after the outgoing CPU is
long gone.  Unfortunately, this means that other CPU-hotplug callbacks
can execute while the outgoing CPU's callbacks are still immobilized
on the long-gone CPU's callback lists.  If any of these CPU-hotplug
callbacks must wait, either directly or indirectly, for the invocation
of any of the immobilized RCU callbacks, the system will hang.

This commit avoids such hangs by migrating the callbacks away from the
outgoing CPU immediately upon its departure, shortly after the return
from __cpu_die() in takedown_cpu().  Thus, RCU is able to advance these
callbacks and invoke them, which allows all the after-the-fact CPU-hotplug
callbacks to wait on these RCU callbacks without risk of a hang.

While in the neighborhood, this commit also moves rcu_send_cbs_to_orphanage()
and rcu_adopt_orphan_cbs() under a pre-existing #ifdef to avoid including
dead code on the one hand and to avoid define-without-use warnings on the
other hand.

Reported-by: Jeffrey Hugo <jhugo@codeaurora.org>
Link: http://lkml.kernel.org/r/db9c91f6-1b17-6136-84f0-03c3c2581ab4@codeaurora.org
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Richard Weinberger <richard@nod.at>
2017-07-25 13:03:43 -07:00
Ethan Barnes 0c96b27305 smp/hotplug: Handle removal correctly in cpuhp_store_callbacks()
If cpuhp_store_callbacks() is called for CPUHP_AP_ONLINE_DYN or
CPUHP_BP_PREPARE_DYN, which are the indicators for dynamically allocated
states, then cpuhp_store_callbacks() allocates a new dynamic state. The
first allocation in each range returns CPUHP_AP_ONLINE_DYN or
CPUHP_BP_PREPARE_DYN.

If cpuhp_remove_state() is invoked for one of these states, then there is
no protection against the allocation mechanism. So the removal, which
should clear the callbacks and the name, gets a new state assigned and
clears that one.

As a consequence the state which should be cleared stays initialized. A
consecutive CPU hotplug operation dereferences the state callbacks and
accesses either freed or reused memory, resulting in crashes.

Add a protection against this by checking the name argument for NULL. If
it's NULL it's a removal. If not, it's an allocation.

[ tglx: Added a comment and massaged changelog ]

Fixes: 5b7aa87e04 ("cpu/hotplug: Implement setup/removal interface")
Signed-off-by: Ethan Barnes <ethan.barnes@sandisk.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.or>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Sebastian Siewior <bigeasy@linutronix.d>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/DM2PR04MB398242FC7776D603D9F99C894A60@DM2PR04MB398.namprd04.prod.outlook.com
2017-07-20 16:40:24 +02:00
Thomas Gleixner dea1d0f5f1 smp/hotplug: Replace BUG_ON and react useful
The move of the unpark functions to the control thread moved the BUG_ON()
there as well. While it made some sense in the idle thread of the upcoming
CPU, it's bogus to crash the control thread on the already online CPU,
especially as the function has a return value and the callsite is prepared
to handle an error return.

Replace it with a WARN_ON_ONCE() and return a proper error code.

Fixes: 9cd4f1a4e7 ("smp/hotplug: Move unparking of percpu threads to the control CPU")
Rightfully-ranted-at-by: Linux Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-07-11 22:25:44 +02:00
Thomas Gleixner 9cd4f1a4e7 smp/hotplug: Move unparking of percpu threads to the control CPU
Vikram reported the following backtrace:

   BUG: scheduling while atomic: swapper/7/0/0x00000002
   CPU: 7 PID: 0 Comm: swapper/7 Not tainted 4.9.32-perf+ #680
   schedule
   schedule_hrtimeout_range_clock
   schedule_hrtimeout
   wait_task_inactive
   __kthread_bind_mask
   __kthread_bind
   __kthread_unpark
   kthread_unpark
   cpuhp_online_idle
   cpu_startup_entry
   secondary_start_kernel

He analyzed correctly that a parked cpu hotplug thread of an offlined CPU
was still on the runqueue when the CPU came back online and tried to unpark
it. This causes the thread which invoked kthread_unpark() to call
wait_task_inactive() and subsequently schedule() with preemption disabled.
His proposed workaround was to "make sure" that a parked thread has
scheduled out when the CPU goes offline, so the situation cannot happen.

But that's still wrong because the root cause is not the fact that the
percpu thread is still on the runqueue and neither that preemption is
disabled, which could be simply solved by enabling preemption before
calling kthread_unpark().

The real issue is that the calling thread is the idle task of the upcoming
CPU, which is not supposed to call anything which might sleep.  The moron,
who wrote that code, missed completely that kthread_unpark() might end up
in schedule().

The solution is simpler than expected. The thread which controls the
hotplug operation is waiting for the CPU to call complete() on the hotplug
state completion. So the idle task of the upcoming CPU can set its state to
CPUHP_AP_ONLINE_IDLE and invoke complete(). This in turn wakes the control
task on a different CPU, which then can safely do the unpark and kick the
now unparked hotplug thread of the upcoming CPU to complete the bringup to
the final target state.

Control CPU                     AP

bringup_cpu();
  __cpu_up()  ------------>
				bringup_ap();
  bringup_wait_for_ap()
    wait_for_completion();
                                cpuhp_online_idle();
                <------------    complete();
    unpark(AP->stopper);
    unpark(AP->hotplugthread);
                                while(1)
                                  do_idle();
    kick(AP->hotplugthread);
    wait_for_completion();	hotplug_thread()
				  run_online_callbacks();
				  complete();

Fixes: 8df3e07e7f ("cpu/hotplug: Let upcoming cpu bring itself fully up")
Reported-by: Vikram Mulukutla <markivx@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Sewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1707042218020.2131@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-07-06 10:55:10 +02:00
Linus Torvalds 9a9594efe5 Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP hotplug updates from Thomas Gleixner:
 "This update is primarily a cleanup of the CPU hotplug locking code.

  The hotplug locking mechanism is an open coded RWSEM, which allows
  recursive locking. The main problem with that is the recursive nature
  as it evades the full lockdep coverage and hides potential deadlocks.

  The rework replaces the open coded RWSEM with a percpu RWSEM and
  establishes full lockdep coverage that way.

  The bulk of the changes fix up recursive locking issues and address
  the now fully reported potential deadlocks all over the place. Some of
  these deadlocks have been observed in the RT tree, but on mainline the
  probability was low enough to hide them away."

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  cpu/hotplug: Constify attribute_group structures
  powerpc: Only obtain cpu_hotplug_lock if called by rtasd
  ARM/hw_breakpoint: Fix possible recursive locking for arch_hw_breakpoint_init
  cpu/hotplug: Remove unused check_for_tasks() function
  perf/core: Don't release cred_guard_mutex if not taken
  cpuhotplug: Link lock stacks for hotplug callbacks
  acpi/processor: Prevent cpu hotplug deadlock
  sched: Provide is_percpu_thread() helper
  cpu/hotplug: Convert hotplug locking to percpu rwsem
  s390: Prevent hotplug rwsem recursion
  arm: Prevent hotplug rwsem recursion
  arm64: Prevent cpu hotplug rwsem recursion
  kprobes: Cure hotplug lock ordering issues
  jump_label: Reorder hotplug lock and jump_label_lock
  perf/tracing/cpuhotplug: Fix locking order
  ACPI/processor: Use cpu_hotplug_disable() instead of get_online_cpus()
  PCI: Replace the racy recursion prevention
  PCI: Use cpu_hotplug_disable() instead of get_online_cpus()
  perf/x86/intel: Drop get_online_cpus() in intel_snb_check_microcode()
  x86/perf: Drop EXPORT of perf_check_microcode
  ...
2017-07-03 18:08:06 -07:00
Arvind Yadav 993647a293 cpu/hotplug: Constify attribute_group structures
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group.

So mark the non-const structs as const:

File size before:
   text	   data	    bss	    dec	    hex	filename
  12582	  15361	     20	  27963	   6d3b	kernel/cpu.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
  12710	  15265	     20	  27995	   6d5b	kernel/cpu.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: anna-maria@linutronix.de
Cc: bigeasy@linutronix.de
Cc: boris.ostrovsky@oracle.com
Cc: rcochran@linutronix.de
Link: http://lkml.kernel.org/r/f9079e94e12b36d245e7adbf67d312bc5d0250c6.1498737970.git.arvind.yadav.cs@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-30 09:34:39 +02:00
Thomas Gleixner c5cb83bb33 genirq/cpuhotplug: Handle managed IRQs on CPU hotplug
If a CPU goes offline, interrupts affine to the CPU are moved away. If the
outgoing CPU is the last CPU in the affinity mask the migration code breaks
the affinity and sets it it all online cpus.

This is a problem for affinity managed interrupts as CPU hotplug is often
used for power management purposes. If the affinity is broken, the
interrupt is not longer affine to the CPUs to which it was allocated.

The affinity spreading allows to lay out multi queue devices in a way that
they are assigned to a single CPU or a group of CPUs. If the last CPU goes
offline, then the queue is not longer used, so the interrupt can be
shutdown gracefully and parked until one of the assigned CPUs comes online
again.

Add a graceful shutdown mechanism into the irq affinity breaking code path,
mark the irq as MANAGED_SHUTDOWN and leave the affinity mask unmodified.

In the online path, scan the active interrupts for managed interrupts and
if the interrupt is functional and the newly online CPU is part of the
affinity mask, restart the interrupt if it is marked MANAGED_SHUTDOWN or if
the interrupts is started up, try to add the CPU back to the effective
affinity mask.

Originally-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619235447.273417334@linutronix.de
2017-06-22 18:21:25 +02:00
Arnd Bergmann 57de72125d cpu/hotplug: Remove unused check_for_tasks() function
clang -Wunused-function found one remaining function that was
apparently meant to be removed in a recent code cleanup:

kernel/cpu.c:565:20: warning: unused function 'check_for_tasks' [-Wunused-function]

Sebastian explained: The function became unused unintentionally, but there
is already a failure check, when a task cannot be removed from the outgoing
cpu in the scheduler code, so bringing it back is not really giving any
extra value.

Fixes: 530e9b76ae ("cpu/hotplug: Remove obsolete cpu hotplug register/unregister functions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Link: http://lkml.kernel.org/r/20170608085544.2257132-1-arnd@arndb.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-12 19:00:55 +02:00
Sebastian Andrzej Siewior 40da1b11f0 cpu/hotplug: Drop the device lock on error
If a custom CPU target is specified and that one is not available _or_
can't be interrupted then the code returns to userland without dropping a
lock as notices by lockdep:

|echo 133 > /sys/devices/system/cpu/cpu7/hotplug/target
| ================================================
| [ BUG: lock held when returning to user space! ]
| ------------------------------------------------
| bash/503 is leaving the kernel with locks still held!
| 1 lock held by bash/503:
|  #0:  (device_hotplug_lock){+.+...}, at: [<ffffffff815b5650>] lock_device_hotplug_sysfs+0x10/0x40

So release the lock then.

Fixes: 757c989b99 ("cpu/hotplug: Make target state writeable")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170602142714.3ogo25f2wbq6fjpj@linutronix.de
2017-06-03 09:35:04 +02:00
Thomas Gleixner 49dfe2a677 cpuhotplug: Link lock stacks for hotplug callbacks
The CPU hotplug callbacks are not covered by lockdep versus the cpu hotplug
rwsem.

CPU0						CPU1
cpuhp_setup_state(STATE, startup, teardown);
 cpus_read_lock();
  invoke_callback_on_ap();
    kick_hotplug_thread(ap);
    wait_for_completion();			hotplug_thread_fn()
    						  lock(m);
						  do_stuff();
						  unlock(m);

Lockdep does not know about this dependency and will not trigger on the
following code sequence:

	  lock(m);
	  cpus_read_lock();
	  
Add a lockdep map and connect the initiators lock chain with the hotplug
thread lock chain, so potential deadlocks can be detected.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170524081549.709375845@linutronix.de
2017-05-26 10:10:48 +02:00
Thomas Gleixner fc8dffd379 cpu/hotplug: Convert hotplug locking to percpu rwsem
There are no more (known) nested calls to get_online_cpus() and all
observed lock ordering problems have been addressed.

Replace the magic nested 'rwsem' hackery with a percpu-rwsem.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170524081549.447014063@linutronix.de
2017-05-26 10:10:46 +02:00
Sebastian Andrzej Siewior 210e21331f cpu/hotplug: Use stop_machine_cpuslocked() in takedown_cpu()
takedown_cpu() is a cpu hotplug function invoking stop_machine(). The cpu
hotplug machinery holds the hotplug lock for write.

stop_machine() invokes get_online_cpus() as well. This is correct, but
prevents the conversion of the hotplug locking to a percpu rwsem.

Use stop_machine_cpuslocked() to avoid the nested call.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170524081548.423292433@linutronix.de
2017-05-26 10:10:42 +02:00
Thomas Gleixner 9805c67333 cpu/hotplug: Add __cpuhp_state_add_instance_cpuslocked()
Add cpuslocked() variants for the multi instance registration so this can
be called from a cpus_read_lock() protected region.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170524081547.321782217@linutronix.de
2017-05-26 10:10:35 +02:00
Sebastian Andrzej Siewior 71def423fe cpu/hotplug: Provide cpuhp_setup/remove_state[_nocalls]_cpuslocked()
Some call sites of cpuhp_setup/remove_state[_nocalls]() are within a
cpus_read locked region.

cpuhp_setup/remove_state[_nocalls]() call cpus_read_lock() as well, which
is possible in the current implementation but prevents converting the
hotplug locking to a percpu rwsem.

Provide locked versions of the interfaces to avoid nested calls to
cpus_read_lock().

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170524081547.239600868@linutronix.de
2017-05-26 10:10:35 +02:00
Thomas Gleixner 8f553c498e cpu/hotplug: Provide cpus_read|write_[un]lock()
The counting 'rwsem' hackery of get|put_online_cpus() is going to be
replaced by percpu rwsem.

Rename the functions to make it clear that it's locking and not some
refcount style interface. These new functions will be used for the
preparatory patches which make the code ready for the percpu rwsem
conversion.

Rename all instances in the cpu hotplug code while at it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170524081547.080397752@linutronix.de
2017-05-26 10:10:34 +02:00
Ingo Molnar 0ba78a95a6 Merge branch 'linus' into locking/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-14 10:29:40 +02:00
Peter Zijlstra 8ce371f984 lockdep: Fix per-cpu static objects
Since commit 383776fa75 ("locking/lockdep: Handle statically initialized
PER_CPU locks properly") we try to collapse per-cpu locks into a single
class by giving them all the same key. For this key we choose the canonical
address of the per-cpu object, which would be the offset into the per-cpu
area.

This has two problems:

 - there is a case where we run !0 lock->key through static_obj() and
   expect this to pass; it doesn't for canonical pointers.

 - 0 is a valid canonical address.

Cure both issues by redefining the canonical address as the address of the
per-cpu variable on the boot CPU.

Since I didn't want to rely on CPU0 being the boot-cpu, or even existing at
all, track the boot CPU in a variable.

Fixes: 383776fa75 ("locking/lockdep: Handle statically initialized PER_CPU locks properly")
Reported-by: kernel test robot <fengguang.wu@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Borislav Petkov <bp@suse.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-mm@kvack.org
Cc: wfg@linux.intel.com
Cc: kernel test robot <fengguang.wu@intel.com>
Cc: LKP <lkp@01.org>
Link: http://lkml.kernel.org/r/20170320114108.kbvcsuepem45j5cr@hirez.programming.kicks-ass.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-26 15:09:45 +02:00
Sebastian Andrzej Siewior dc434e056f cpu/hotplug: Serialize callback invocations proper
The setup/remove_state/instance() functions in the hotplug core code are
serialized against concurrent CPU hotplug, but unfortunately not serialized
against themself.

As a consequence a concurrent invocation of these function results in
corruption of the callback machinery because two instances try to invoke
callbacks on remote cpus at the same time. This results in missing callback
invocations and initiator threads waiting forever on the completion.

The obvious solution to replace get_cpu_online() with cpu_hotplug_begin()
is not possible because at least one callsite calls into these functions
from a get_online_cpu() locked region.

Extend the protection scope of the cpuhp_state_mutex from solely protecting
the state arrays to cover the callback invocation machinery as well.

Fixes: 5b7aa87e04 ("cpu/hotplug: Implement setup/removal interface")
Reported-and-tested-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: hpa@zytor.com
Cc: mingo@kernel.org
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/20170314150645.g4tdyoszlcbajmna@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-14 19:19:27 +01:00
Ingo Molnar 299300258d sched/headers: Prepare for new header dependencies before moving code to <linux/sched/task.h>
We are going to split <linux/sched/task.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/task.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:35 +01:00
Ingo Molnar ef8bd77f33 sched/headers: Prepare for new header dependencies before moving code to <linux/sched/hotplug.h>
We are going to split <linux/sched/hotplug.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/hotplug.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:35 +01:00
Ingo Molnar 3f07c01441 sched/headers: Prepare for new header dependencies before moving code to <linux/sched/signal.h>
We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:29 +01:00
Tobias Klauser 0fec9557fd cpu/hotplug: Remove unused but set variable in _cpu_down()
After the recent removal of the hotplug notifiers the variable 'hasdied' in
_cpu_down() is set but no longer read, leading to the following GCC warning
when building with 'make W=1':

  kernel/cpu.c:767:7: warning: variable ‘hasdied’ set but not used [-Wunused-but-set-variable]

Fix it by removing the variable.

Fixes: 530e9b76ae ("cpu/hotplug: Remove obsolete cpu hotplug register/unregister functions")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20170117143501.20893-1-tklauser@distanz.ch
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-01-18 11:55:09 +01:00
Thomas Gleixner 4205e4786d cpu/hotplug: Provide dynamic range for prepare stage
Mathieu reported that the LTTNG modules are broken as of 4.10-rc1 due to
the removal of the cpu hotplug notifiers.

Usually I don't care much about out of tree modules, but LTTNG is widely
used in distros. There are two ways to solve that:

1) Reserve a hotplug state for LTTNG

2) Add a dynamic range for the prepare states.

While #1 is the simplest solution, #2 is the proper one as we can convert
in tree users, which do not care about ordering, to the dynamic range as
well.

Add a dynamic range which allows LTTNG to request states in the prepare
stage.

Reported-and-tested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Sewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1701101353010.3401@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-01-16 13:20:05 +01:00
Thomas Gleixner b9d9d6911b smp/hotplug: Undo tglxs brainfart
The attempt to prevent overwriting an active state resulted in a
disaster which effectively disables all dynamically allocated hotplug
states.

Cleanup the mess.

Fixes: dc280d9362 ("cpu/hotplug: Prevent overwriting of callbacks")
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-26 17:30:24 -08:00
Thomas Gleixner 530e9b76ae cpu/hotplug: Remove obsolete cpu hotplug register/unregister functions
hotcpu_notifier(), cpu_notifier(), __hotcpu_notifier(), __cpu_notifier(),
register_hotcpu_notifier(), register_cpu_notifier(),
__register_hotcpu_notifier(), __register_cpu_notifier(),
unregister_hotcpu_notifier(), unregister_cpu_notifier(),
__unregister_hotcpu_notifier(), __unregister_cpu_notifier()

are unused now. Remove them and all related code.

Remove also the now pointless cpu notifier error injection mechanism. The
states can be executed step by step and error rollback is the same as cpu
down, so any state transition can be tested w/o requiring the notifier
error injection.

Some CPU hotplug states are kept as they are (ab)used for hotplug state
tracking.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20161221192112.005642358@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25 10:47:43 +01:00
Thomas Gleixner dc280d9362 cpu/hotplug: Prevent overwriting of callbacks
Developers manage to overwrite states blindly without thought. That's fatal
and hard to debug. Add sanity checks to make it fail.

This requries to restructure the code so that the dynamic state allocation
happens in the same lock protected section as the actual store. Otherwise
the previous assignment of 'Reserved' to the name field would trigger the
overwrite check.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/20161221192111.675234535@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25 10:47:42 +01:00
Boris Ostrovsky 512f09801b cpu/hotplug: Clarify description of __cpuhp_setup_state() return value
When invoked with CPUHP_AP_ONLINE_DYN state __cpuhp_setup_state()
is expected to return positive value which is the hotplug state that
the routine assigns.

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: linux-pm@vger.kernel.org
Cc: viresh.kumar@linaro.org
Cc: bigeasy@linutronix.de
Cc: rjw@rjwysocki.net
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1481814058-4799-2-git-send-email-boris.ostrovsky@oracle.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-15 17:48:20 +01:00
Michal Hocko 777c6e0dae hotplug: Make register and unregister notifier API symmetric
Yu Zhao has noticed that __unregister_cpu_notifier only unregisters its
notifiers when HOTPLUG_CPU=y while the registration might succeed even
when HOTPLUG_CPU=n if MODULE is enabled. This means that e.g. zswap
might keep a stale notifier on the list on the manual clean up during
the pool tear down and thus corrupt the list. Resulting in the following

[  144.964346] BUG: unable to handle kernel paging request at ffff880658a2be78
[  144.971337] IP: [<ffffffffa290b00b>] raw_notifier_chain_register+0x1b/0x40
<snipped>
[  145.122628] Call Trace:
[  145.125086]  [<ffffffffa28e5cf8>] __register_cpu_notifier+0x18/0x20
[  145.131350]  [<ffffffffa2a5dd73>] zswap_pool_create+0x273/0x400
[  145.137268]  [<ffffffffa2a5e0fc>] __zswap_param_set+0x1fc/0x300
[  145.143188]  [<ffffffffa2944c1d>] ? trace_hardirqs_on+0xd/0x10
[  145.149018]  [<ffffffffa2908798>] ? kernel_param_lock+0x28/0x30
[  145.154940]  [<ffffffffa2a3e8cf>] ? __might_fault+0x4f/0xa0
[  145.160511]  [<ffffffffa2a5e237>] zswap_compressor_param_set+0x17/0x20
[  145.167035]  [<ffffffffa2908d3c>] param_attr_store+0x5c/0xb0
[  145.172694]  [<ffffffffa290848d>] module_attr_store+0x1d/0x30
[  145.178443]  [<ffffffffa2b2b41f>] sysfs_kf_write+0x4f/0x70
[  145.183925]  [<ffffffffa2b2a5b9>] kernfs_fop_write+0x149/0x180
[  145.189761]  [<ffffffffa2a99248>] __vfs_write+0x18/0x40
[  145.194982]  [<ffffffffa2a9a412>] vfs_write+0xb2/0x1a0
[  145.200122]  [<ffffffffa2a9a732>] SyS_write+0x52/0xa0
[  145.205177]  [<ffffffffa2ff4d97>] entry_SYSCALL_64_fastpath+0x12/0x17

This can be even triggered manually by changing
/sys/module/zswap/parameters/compressor multiple times.

Fix this issue by making unregister APIs symmetric to the register so
there are no surprises.

Fixes: 47e627bc8c ("[PATCH] hotplug: Allow modules to use the cpu hotplug notifiers even if !CONFIG_HOTPLUG_CPU")
Reported-and-tested-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Link: http://lkml.kernel.org/r/20161207135438.4310-1-mhocko@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-08 10:08:41 +01:00
Joonas Lahtinen a705e07b9c cpu/hotplug: Use distinct name for cpu_hotplug.dep_map
Use distinctive name for cpu_hotplug.dep_map to avoid the actual
cpu_hotplug.lock appearing as cpu_hotplug.lock#2 in lockdep splats.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gautham R . Shenoy <ego@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: intel-gfx@lists.freedesktop.org
Cc: trivial@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-16 11:09:32 +02:00
Linus Torvalds 597f03f9d1 Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
 "Yet another batch of cpu hotplug core updates and conversions:

   - Provide core infrastructure for multi instance drivers so the
     drivers do not have to keep custom lists.

   - Convert custom lists to the new infrastructure. The block-mq custom
     list conversion comes through the block tree and makes the diffstat
     tip over to more lines removed than added.

   - Handle unbalanced hotplug enable/disable calls more gracefully.

   - Remove the obsolete CPU_STARTING/DYING notifier support.

   - Convert another batch of notifier users.

   The relayfs changes which conflicted with the conversion have been
   shipped to me by Andrew.

   The remaining lot is targeted for 4.10 so that we finally can remove
   the rest of the notifiers"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  cpufreq: Fix up conversion to hotplug state machine
  blk/mq: Reserve hotplug states for block multiqueue
  x86/apic/uv: Convert to hotplug state machine
  s390/mm/pfault: Convert to hotplug state machine
  mips/loongson/smp: Convert to hotplug state machine
  mips/octeon/smp: Convert to hotplug state machine
  fault-injection/cpu: Convert to hotplug state machine
  padata: Convert to hotplug state machine
  cpufreq: Convert to hotplug state machine
  ACPI/processor: Convert to hotplug state machine
  virtio scsi: Convert to hotplug state machine
  oprofile/timer: Convert to hotplug state machine
  block/softirq: Convert to hotplug state machine
  lib/irq_poll: Convert to hotplug state machine
  x86/microcode: Convert to hotplug state machine
  sh/SH-X3 SMP: Convert to hotplug state machine
  ia64/mca: Convert to hotplug state machine
  ARM/OMAP/wakeupgen: Convert to hotplug state machine
  ARM/shmobile: Convert to hotplug state machine
  arm64/FP/SIMD: Convert to hotplug state machine
  ...
2016-10-03 19:43:08 -07:00
Linus Torvalds 4b978934a4 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Expedited grace-period changes, most notably avoiding having user
     threads drive expedited grace periods, using a workqueue instead.

   - Miscellaneous fixes, including a performance fix for lists that was
     sent with the lists modifications.

   - CPU hotplug updates, most notably providing exact CPU-online
     tracking for RCU. This will in turn allow removal of the checks
     supporting RCU's prior heuristic that was based on the assumption
     that CPUs would take no longer than one jiffy to come online.

   - Torture-test updates.

   - Documentation updates"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  list: Expand list_first_entry_or_null()
  torture: TOROUT_STRING(): Insert a space between flag and message
  rcuperf: Consistently insert space between flag and message
  rcutorture: Print out barrier error as document says
  torture: Add task state to writer-task stall printk()s
  torture: Convert torture_shutdown() to hrtimer
  rcutorture: Convert to hotplug state machine
  cpu/hotplug: Get rid of CPU_STARTING reference
  rcu: Provide exact CPU-online tracking for RCU
  rcu: Avoid redundant quiescent-state chasing
  rcu: Don't use modular infrastructure in non-modular code
  sched: Make wake_up_nohz_cpu() handle CPUs going offline
  rcu: Use rcu_gp_kthread_wake() to wake up grace period kthreads
  rcu: Use RCU's online-CPU state for expedited IPI retry
  rcu: Exclude RCU-offline CPUs from expedited grace periods
  rcu: Make expedited RCU CPU stall warnings respond to controls
  rcu: Stop disabling expedited RCU CPU stall warnings
  rcu: Drive expedited grace periods from workqueue
  rcu: Consolidate expedited grace period machinery
  documentation: Record reason for rcu_head two-byte alignment
  ...
2016-10-03 10:29:53 -07:00
Sebastian Andrzej Siewior 6731d4f123 slab: Convert to hotplug state machine
Install the callbacks via the state machine.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: linux-mm@kvack.org
Cc: rt@linutronix.de
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Link: http://lkml.kernel.org/r/20160823125319.abeapfjapf2kfezp@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-06 18:30:20 +02:00
Richard Weinberger e6d4989a9a relayfs: Convert to hotplug state machine
Install the callbacks via the state machine. They are installed at run time but
relay_prepare_cpu() does not need to be invoked by the boot CPU because
relay_open() was not yet invoked and there are no pools that need to be created.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: rt@linutronix.de
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20160818125731.27256-3-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-06 18:30:20 +02:00
Thomas Gleixner ee1e714b94 cpu/hotplug: Remove CPU_STARTING and CPU_DYING notifier
All users are converted to state machine, remove CPU_STARTING and the
corresponding CPU_DYING.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160818125731.27256-2-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-06 18:30:19 +02:00
Thomas Gleixner 677f664653 cpu/hotplug: Make state names consistent
We should have all names in the scheme "[subsys/]facility:state]". Fix the
core to comply.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-06 16:20:28 +02:00
Thomas Gleixner 3c1627e999 cpu/hotplug: Replace anon union
Some compilers are unhappy with the anon union in the state array. Replace
it with a named union.

While at it align the state array initializers proper and add the missing
name tags.

Fixes: cf392d10b6 "cpu/hotplug: Add multi instance support"
Reported-by: Ingo Molnar <mingo@kernel.org>
Reported-by: Fenguang Wu <fengguang.wu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: rt@linutronix.de
2016-09-05 15:32:58 +02:00
Lianwei Wang 01b4115906 cpu/hotplug: Handle unbalanced hotplug enable/disable
When cpu_hotplug_enable() is called unbalanced w/o a preceeding
cpu_hotplug_disable() the code emits a warning, but happily decrements the
disabled counter. This causes the next operations to malfunction.

Prevent the decrement and just emit a warning.

Signed-off-by: Lianwei Wang <lianwei.wang@gmail.com>
Cc: peterz@infradead.org
Cc: linux-pm@vger.kernel.org
Cc: oleg@redhat.com
Link: http://lkml.kernel.org/r/1465541008-12476-1-git-send-email-lianwei.wang@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-02 20:37:17 +02:00
Thomas Gleixner cf392d10b6 cpu/hotplug: Add multi instance support
This patch adds the ability for a given state to have multiple
instances. Until now all states have a single instance and the startup /
teardown callback use global variables.
A few drivers need to perform a the same callbacks on multiple
"instances". Currently we have three drivers in tree which all have a
global list which they iterate over. With multi instance they support
don't need their private list and the functionality has been moved into
core code. Plus we hold the hotplug lock in core so no cpus comes/goes
while instances are registered and we do rollback in error case :)

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/1471024183-12666-3-git-send-email-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-02 20:05:05 +02:00
Thomas Gleixner a724632ca0 cpu/hotplug: Rework callback invocation logic
This is preparation for the following patch.
This rework here changes the arguments of cpuhp_invoke_callback(). It
passes now `state' and whether `startup' or `teardown' callback should
be invoked. The callback then is looked up by the function.

The following is a clanup of callers:
- cpuhp_issue_call() has one argument less
- struct cpuhp_cpu_state (which is used by the hotplug thread) gets also
  its callback removed. The decision if it is a single callback
  invocation moved to the `single' variable. Also a `bringup' variable
  has been added to distinguish between startup and teardown callback.
- take_cpu_down() needs to start one step earlier. We always get here
  via CPUHP_TEARDOWN_CPU callback. Before that change cpuhp_ap_states +
  CPUHP_TEARDOWN_CPU pointed to an empty entry because TEARDOWN is saved
  in bp_states for this reason. Now that we use cpuhp_get_step() to
  lookup the state we must explicitly skip it in order not to invoke it
  twice.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/1471024183-12666-2-git-send-email-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-02 20:05:05 +02:00
James Morse d391e55229 cpu/hotplug: Allow suspend/resume CPU to be specified
disable_nonboot_cpus() assumes that the lowest numbered online CPU is
the boot CPU, and that this is the correct CPU to run any power
management code on.

On x86 this is always correct, as CPU0 cannot (easily) by taken offline.

On arm64 CPU0 can be taken offline. For hibernate/resume this means we
may hibernate on a CPU other than CPU0. If the system is rebooted with
kexec 'CPU0' will be assigned to a different physical CPU. This
complicates hibernate/resume as now we can't trust the CPU numbers.
Arch code can find the correct physical CPU, and ensure it is online
before resume from hibernate begins, but also needs to influence
disable_nonboot_cpus()s choice of CPU.

Rename disable_nonboot_cpus() as freeze_secondary_cpus() and add an
argument indicating which CPU should be left standing. Follow the logic
in migrate_to_reboot_cpu() to use the lowest numbered online CPU if the
requested CPU is not online.
Add disable_nonboot_cpus() as an inline function that has the existing
behaviour.

Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-08-26 11:20:11 +01:00
Sebastian Andrzej Siewior 0c6d4576c4 cpu/hotplug: Get rid of CPU_STARTING reference
CPU_STARTING is scheduled for removal. There is no use of it in drivers
and core code uses it only for compatibility with old-style CPU-hotplug
notifiers.  This patch removes therefore removes CPU_STARTING from an
RCU-related comment.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-08-22 09:50:45 -07:00
Paul E. McKenney 7ec99de36f rcu: Provide exact CPU-online tracking for RCU
Up to now, RCU has assumed that the CPU-online process makes it from
CPU_UP_PREPARE to set_cpu_online() within one jiffy.  Given the recent
rise of virtualized environments, this assumption is very clearly
obsolete.  Failing to meet this deadline can result in RCU paying
attention to an incoming CPU for one jiffy, then ignoring it until the
grace period following the one in which that CPU sets itself online.
This situation might prove to be fatally disappointing to any RCU
read-side critical sections that had the misfortune to execute during
the time in which RCU was ignoring the slow-to-come-online CPU.

This commit therefore updates RCU's internal CPU state-tracking
information at notify_cpu_starting() time, thus providing RCU with
an exact transition of the CPU's state from offline to online.

Note that this means that incoming CPUs must not use RCU read-side
critical section (other than those of SRCU) until notify_cpu_starting()
time.  Note also that the CPU_STARTING notifiers -are- allowed to use
RCU read-side critical sections.  (Of course, CPU-hotplug notifiers are
rapidly becoming obsolete, so you need to act fast!)

If a given architecture or CPU family needs to use RCU read-side
critical sections earlier, the call to rcu_cpu_starting() from
notify_cpu_starting() will need to be architecture-specific, with
architectures that need early use being required to hand-place
the call to rcu_cpu_starting() at some point preceding the call to
notify_cpu_starting().

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-08-22 09:36:57 -07:00
Boris Ostrovsky aa877175e7 cpu/hotplug: Prevent alloc/free of irq descriptors during CPU up/down (again)
Now that Xen no longer allocates irqs in _cpu_up() we can restore
commit:

  a899418167 ("hotplug: Prevent alloc/free of irq descriptors during cpu up/down")

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: david.vrabel@citrix.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1470244948-17674-3-git-send-email-boris.ostrovsky@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-10 15:42:57 +02:00
Richard Cochran 4fae16dffb timers/core: Correct callback order during CPU hot plug
On the tear-down path, the dead CPU callback for the timers was
misplaced within the 'cpuhp_state' enumeration.  There is a hidden
dependency between the timers and block multiqueue.  The timers
callback must happen before the block multiqueue callback otherwise a
RCU stall occurs.

Move the timers callback to the proper place in the state machine.

Reported-and-tested-by: Jon Hunter <jonathanh@nvidia.com>
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 24f73b9971 ("timers/core: Convert to hotplug state machine")
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: John Stultz <john.stultz@linaro.org>
Cc: rt@linutronix.de
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1469610498-25914-1-git-send-email-rcochran@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-28 18:56:22 +02:00
Thomas Gleixner 4df8374254 rcu: Convert rcutree to hotplug state machine
Straight forward conversion to the state machine. Though the question arises
whether this needs really all these state transitions to work.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160713153337.982013161@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-15 10:41:44 +02:00
Richard Weinberger 31487f8328 smp/cfd: Convert core to hotplug state machine
Install the callbacks via the state machine. They are installed at runtime so
smpcfd_prepare_cpu() needs to be invoked by the boot-CPU.

Signed-off-by: Richard Weinberger <richard@nod.at>
[ Added the dropped CPU dying case back in. ]
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Davidlohr Bueso <dave@stgolabs>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160713153337.818376366@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-15 10:41:43 +02:00
Richard Cochran 24f73b9971 timers/core: Convert to hotplug state machine
When tearing down, call timers_dead_cpu() before notify_dead().
There is a hidden dependency between:

 - timers
 - block multiqueue
 - rcutree

If timers_dead_cpu() comes later than blk_mq_queue_reinit_notify()
that latter function causes a RCU stall.

Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160713153337.566790058@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-15 10:41:42 +02:00
Thomas Gleixner 27590dc17b hrtimer: Convert to hotplug state machine
Split out the clockevents callbacks instead of piggybacking them on
hrtimers.

This gets rid of a POST_DEAD user. See commit:

  54e88fad22 ("sched: Make sure timers have migrated before killing the migration_thread")

We just move the callback state to the proper place in the state machine.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160713153337.485419196@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-15 10:41:37 +02:00
Thomas Gleixner 7ee681b252 workqueue: Convert to state machine callbacks
Get rid of the prio ordering of the separate notifiers and use a proper state
callback pair.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160713153335.197083890@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-14 09:34:43 +02:00
Thomas Gleixner 00e16c3d68 perf/core: Convert to hotplug state machine
Actually a nice symmetric startup/teardown pair which fits properly into
the state machine concept. In the long run we should be able to invoke
the startup callback for the boot CPU via the state machine and get
rid of the init function which invokes it on the boot CPU.

Note: This comes actually before the perf hardware callbacks. In the notifier
model the hardware callbacks have a higher priority than the core
callback. But that's solely for CPU offline so that hardware migration of
events happens before the core is notified about the outgoing CPU.

With the symetric state array model we have the following ordering:

 UP:     core -> hardware
 DOWN:   hardware -> core

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Reviewed-by: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160713153333.587514098@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-14 09:34:31 +02:00
Thomas Gleixner 6a4e24518c cpu/hotplug: Handle early registration gracefully
We switched the hotplug machinery to smpboot threads. Early registration of
hotplug callbacks, i.e. from do_pre_smp_initcalls(), happens before the
threads are initialized. Instead of moving the thread init, we simply handle
it in the hotplug code itself and invoke the function directly.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160713153332.896450738@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-14 09:34:25 +02:00
Thomas Gleixner a7c734140a cpu/hotplug: Keep enough storage space if SMP=n to avoid array out of bounds scribble
Xiaolong Ye reported lock debug warnings triggered by the following commit:

  8de4a0066106 ("perf/x86: Convert the core to the hotplug state machine")

The bug is the following: the cpuhp_bp_states[] array is cut short when
CONFIG_SMP=n, but the dynamically registered callbacks are stored nevertheless
and happily scribble outside of the array bounds...

We need to store them in case that the state is unregistered so we can invoke
the teardown function. That's independent of CONFIG_SMP. Make sure the array
is large enough.

Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Adam Borowski <kilobyte@angband.pl>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: lkp@01.org
Cc: stable@vger.kernel.org
Cc: tipbuild@zytor.com
Fixes: cff7d378d3 "cpu/hotplug: Convert to a state machine for the control processor"
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1607122144560.4083@nanos
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 09:29:39 +02:00
Thomas Gleixner aaddd7d1c7 sched/hotplug: Make activate() the last hotplug step
The scheduler can handle per cpu threads before the cpu is set to active and
it does not allow user space threads on the cpu before active is
set. Attaching to the scheduling domains is also not required before user
space threads can be handled.

Move the activation to the end of the hotplug state space. That also means
that deactivation is the first action when a cpu is shut down.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160310120025.597477199@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-05-06 14:58:25 +02:00
Thomas Gleixner f2785ddb53 sched/hotplug: Move migration CPU_DYING to sched_cpu_dying()
Remove the hotplug notifier and make it an explicit state.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160310120025.502222097@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-05-06 14:58:25 +02:00
Peter Zijlstra b2454caa89 sched/hotplug: Move sync_rcu to be with set_cpu_active(false)
The sync_rcu stuff is specificically for clearing bits in the active
mask, such that everybody will observe the bit cleared and will not
consider the cleared CPU for load-balancing etc.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160310120025.169219710@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-05-06 14:58:24 +02:00
Thomas Gleixner 40190a78f8 sched/hotplug: Convert cpu_[in]active notifiers to state machine
Now that we reduced everything into single notifiers, it's simple to move them
into the hotplug state machine space.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: rt@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-05-06 14:58:24 +02:00
Thomas Gleixner 9cf7243d5d sched: Make set_cpu_rq_start_time() a built in hotplug state
Start distangling the maze of hotplug notifiers in the scheduler.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: rt@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-05-06 14:58:23 +02:00
Sebastian Andrzej Siewior 3b9d6da67e cpu/hotplug: Fix rollback during error-out in __cpu_disable()
The recent introduction of the hotplug thread which invokes the callbacks on
the plugged cpu, cased the following regression:

If takedown_cpu() fails, then we run into several issues:

 1) The rollback of the target cpu states is not invoked. That leaves the smp
    threads and the hotplug thread in disabled state.

 2) notify_online() is executed due to a missing skip_onerr flag. That causes
    that both CPU_DOWN_FAILED and CPU_ONLINE notifications are invoked which
    confuses quite some notifiers.

 3) The CPU_DOWN_FAILED notification is not invoked on the target CPU. That's
    not an issue per se, but it is inconsistent and in consequence blocks the
    patches which rely on these states being invoked on the target CPU and not
    on the controlling cpu. It also does not preserve the strict call order on
    rollback which is problematic for the ongoing state machine conversion as
    well.

To fix this we add a rollback flag to the remote callback machinery and invoke
the rollback including the CPU_DOWN_FAILED notification on the remote
cpu. Further mark the notify online state with 'skip_onerr' so we don't get a
double invokation.

This workaround will go away once we moved the unplug invocation to the target
cpu itself.

[ tglx: Massaged changelog and moved the CPU_DOWN_FAILED notifiaction to the
  	target cpu ]

Fixes: 4cb28ced23 ("cpu/hotplug: Create hotplug threads")
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-s390@vger.kernel.org
Cc: rt@linutronix.de
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Link: http://lkml.kernel.org/r/20160408124015.GA21960@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-04-22 09:49:49 +02:00
Thomas Gleixner d10ef6f938 cpu/hotplug: Document states better
Requested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-12 20:57:38 +01:00
Thomas Gleixner 2a58c527bb cpu/hotplug: Fix smpboot thread ordering
Commit 931ef16330 moved the smpboot thread park/unpark invocation to the
state machine. The move of the unpark invocation was premature as it depends
on work in progress patches.

As a result cpu down can fail, because rcu synchronization in takedown_cpu()
eventually requires a functional softirq thread. I never encountered the
problem in testing, but 0day testing managed to provide a reliable reproducer.

Remove the smpboot_threads_park() call from the state machine for now and put
it back into the original place after the rcu synchronization.

I'm embarrassed as I knew about the dependency and still managed to get it
wrong. Hotplug induced brain melt seems to be the only sensible explanation
for that.

Fixes: 931ef16330 "cpu/hotplug: Unpark smpboot threads from the state machine"
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
2016-03-10 21:21:59 +01:00
Thomas Gleixner 5d8eb84253 cpu/hotplug: Remove redundant state check
The check for the AP range in cpuhp_is_ap_state() is redundant after commit
8df3e07e7f "cpu/hotplug: Let upcoming cpu bring itself fully up" because all
states above CPUHP_BRINGUP_CPU are invoked on the hotplugged cpu. Remove it.

Reported-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-06 16:59:42 +01:00
Thomas Gleixner 71f87b2fc6 cpu/hotplug: Plug death reporting race
Paul noticed that the conversion of the death reporting introduced a race
where the outgoing cpu might be delayed after waking the controll processor,
so it might not be able to call rcu_report_dead() before being physically
removed, leading to RCU stalls.

We cant call complete after rcu_report_dead(), so instead of going back to
busy polling, simply issue a function call to do the completion.

Fixes: 27d50c7eeb "rcu: Make CPU_DYING_IDLE an explicit call"
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20160302201127.GA23440@linux.vnet.ibm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
2016-03-03 10:52:10 +01:00
Thomas Gleixner 27d50c7eeb rcu: Make CPU_DYING_IDLE an explicit call
Make the RCU CPU_DYING_IDLE callback an explicit function call, so it gets
invoked at the proper place.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Rik van Riel <riel@redhat.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20160226182341.870167933@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01 20:36:58 +01:00
Thomas Gleixner e69aab1311 cpu/hotplug: Make wait for dead cpu completion based
Kill the busy spinning on the control side and just wait for the hotplugged
cpu to tell that it reached the dead state.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Rik van Riel <riel@redhat.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20160226182341.776157858@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01 20:36:58 +01:00
Thomas Gleixner 8df3e07e7f cpu/hotplug: Let upcoming cpu bring itself fully up
Let the upcoming cpu kick the hotplug thread and let itself complete the
bringup. That way the controll side can just wait for the completion or later
when we made the hotplug machinery async not care at all.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Rik van Riel <riel@redhat.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20160226182341.697655464@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01 20:36:57 +01:00
Thomas Gleixner 1cf4f629d9 cpu/hotplug: Move online calls to hotplugged cpu
Let the hotplugged cpu invoke the setup/teardown callbacks
(CPU_ONLINE/CPU_DOWN_PREPARE) itself.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Rik van Riel <riel@redhat.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20160226182341.536364371@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01 20:36:57 +01:00
Thomas Gleixner 4cb28ced23 cpu/hotplug: Create hotplug threads
In order to let the hotplugged cpu take care of the setup/teardown, we need a
seperate hotplug thread.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Rik van Riel <riel@redhat.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20160226182341.454541272@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01 20:36:56 +01:00
Thomas Gleixner 2e1a3483ce cpu/hotplug: Split out the state walk into functions
We need that for running callbacks on the AP and the BP.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Rik van Riel <riel@redhat.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20160226182341.374946234@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01 20:36:56 +01:00
Thomas Gleixner 931ef16330 cpu/hotplug: Unpark smpboot threads from the state machine
Handle the smpboot threads in the state machine.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Rik van Riel <riel@redhat.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20160226182341.295777684@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01 20:36:56 +01:00
Thomas Gleixner 949338e351 cpu/hotplug: Move scheduler cpu_online notifier to hotplug core
Move the scheduler cpu online notifier part to the hotplug core. This is
anyway the highest priority callback and we need that functionality right now
for the next changes.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Rik van Riel <riel@redhat.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20160226182341.200791046@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01 20:36:55 +01:00
Thomas Gleixner 5b7aa87e04 cpu/hotplug: Implement setup/removal interface
Implement function which allow to setup/remove hotplug state callbacks.

The default behaviour for setup is to call the startup function for this state
for (or on) all cpus which have a hotplug state >= the installed state.

The default behaviour for removal is to call the teardown function for this
state for (or on) all cpus which have a hotplug state >= the installed state.

This includes rollback to the previous state in case of failure.

A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug
callback pair. This is for drivers which have no dependencies to avoid that we
need to allocate CPUHP states for each of them

For both setup and remove helper functions are provided, which prevent the
core to issue the callbacks. This simplifies the conversion of existing
hotplug notifiers.

[ Dynamic registering implemented by Sebastian Siewior ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Rik van Riel <riel@redhat.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01 20:36:55 +01:00
Thomas Gleixner 757c989b99 cpu/hotplug: Make target state writeable
Make it possible to write a target state to the per cpu state file, so we can
switch between states.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Rik van Riel <riel@redhat.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20160226182341.022814799@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01 20:36:55 +01:00
Thomas Gleixner 98f8cdce1d cpu/hotplug: Add sysfs state interface
Add a sysfs interface so we can actually see in which state the cpus are in.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Rik van Riel <riel@redhat.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20160226182340.942257522@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01 20:36:55 +01:00
Thomas Gleixner af1f40457d cpu/hotplug: Hand in target state to _cpu_up/down
We want to be able to bringup/teardown the cpu to a particular state. Add a
target argument to _cpu_up/down.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Rik van Riel <riel@redhat.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20160226182340.862113133@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01 20:36:54 +01:00
Thomas Gleixner 4baa0afc67 cpu/hotplug: Convert the hotplugged cpu work to a state machine
Move the functions which need to run on the hotplugged processor into
a state machine array and let the code iterate through these functions.

In a later state, this will grow synchronization points between the
control processor and the hotplugged processor, so we can move the
various architecture implementations of the synchronizations to the
core.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Rik van Riel <riel@redhat.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20160226182340.770651526@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01 20:36:54 +01:00
Thomas Gleixner cff7d378d3 cpu/hotplug: Convert to a state machine for the control processor
Move the split out steps into a callback array and let the cpu_up/down
code iterate through the array functions. For now most of the
callbacks are asymmetric to resemble the current hotplug maze.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Rik van Riel <riel@redhat.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20160226182340.671816690@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01 20:36:54 +01:00
Thomas Gleixner 984581728e cpu/hotplug: Split out cpu down functions
Split cpu_down in separate functions in preparation for state machine
conversion.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Rik van Riel <riel@redhat.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20160226182340.511796562@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01 20:36:53 +01:00
Thomas Gleixner ba99746243 cpu/hotplug: Restructure cpu_up code
Split out into separate functions, so we can convert it to a state machine.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Rik van Riel <riel@redhat.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20160226182340.429389195@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01 20:36:53 +01:00
Thomas Gleixner 090e77c391 cpu/hotplug: Restructure FROZEN state handling
There are only a few callbacks which really care about FROZEN
vs. !FROZEN. No need to have extra states for this.

Publish the frozen state in an extra variable which is updated under
the hotplug lock and let the users interested deal with it w/o
imposing that extra state checks on everyone.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Rik van Riel <riel@redhat.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20160226182340.334912357@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01 20:36:53 +01:00
Rasmus Villemoes 9425676a36 kernel/cpu.c: make set_cpu_* static inlines
Almost all callers of the set_cpu_* functions pass an explicit true or
false.  Making them static inline thus replaces the function calls with a
simple set_bit/clear_bit, saving some .text.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20 17:09:18 -08:00
Rasmus Villemoes 5aec01b834 kernel/cpu.c: eliminate cpu_*_mask
Replace the variables cpu_possible_mask, cpu_online_mask, cpu_present_mask
and cpu_active_mask with macros expanding to expressions of the same type
and value, eliminating some indirection.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20 17:09:18 -08:00
Rasmus Villemoes 4b804c85dc kernel/cpu.c: export __cpu_*_mask
Exporting the cpumasks __cpu_possible_mask and friends will allow us to
remove the extra indirection through the cpu_*_mask variables.  It will
also allow the set_cpu_* functions to become static inlines, which will
give a .text reduction.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20 17:09:18 -08:00
Rasmus Villemoes c4c54dd1ca kernel/cpu.c: change type of cpu_possible_bits and friends
Change cpu_possible_bits and friends (online, present, active) from being
bitmaps that happen to have the right size to actually being struct
cpumasks.  Also rename them to __cpu_xyz_mask.  This is mostly a small
cleanup in preparation for exporting them and, eventually, eliminating the
extra indirection through the cpu_xyz_mask variables.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20 17:09:18 -08:00
Linus Torvalds 53528695ff Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler changes from Ingo Molnar:
 "The main changes in this cycle were:

   - sched/fair load tracking fixes and cleanups (Byungchul Park)

   - Make load tracking frequency scale invariant (Dietmar Eggemann)

   - sched/deadline updates (Juri Lelli)

   - stop machine fixes, cleanups and enhancements for bugs triggered by
     CPU hotplug stress testing (Oleg Nesterov)

   - scheduler preemption code rework: remove PREEMPT_ACTIVE and related
     cleanups (Peter Zijlstra)

   - Rework the sched_info::run_delay code to fix races (Peter Zijlstra)

   - Optimize per entity utilization tracking (Peter Zijlstra)

   - ... misc other fixes, cleanups and smaller updates"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
  sched: Don't scan all-offline ->cpus_allowed twice if !CONFIG_CPUSETS
  sched: Move cpu_active() tests from stop_two_cpus() into migrate_swap_stop()
  sched: Start stopper early
  stop_machine: Kill cpu_stop_threads->setup() and cpu_stop_unpark()
  stop_machine: Kill smp_hotplug_thread->pre_unpark, introduce stop_machine_unpark()
  stop_machine: Change cpu_stop_queue_two_works() to rely on stopper->enabled
  stop_machine: Introduce __cpu_stop_queue_work() and cpu_stop_queue_two_works()
  stop_machine: Ensure that a queued callback will be called before cpu_stop_park()
  sched/x86: Fix typo in __switch_to() comments
  sched/core: Remove a parameter in the migrate_task_rq() function
  sched/core: Drop unlikely behind BUG_ON()
  sched/core: Fix task and run queue sched_info::run_delay inconsistencies
  sched/numa: Fix task_tick_fair() from disabling numa_balancing
  sched/core: Add preempt_count invariant check
  sched/core: More notrace annotations
  sched/core: Kill PREEMPT_ACTIVE
  sched/core, sched/x86: Kill thread_info::saved_preempt_count
  sched/core: Simplify preempt_count tests
  sched/core: Robustify preemption leak checks
  sched/core: Stop setting PREEMPT_ACTIVE
  ...
2015-11-03 18:03:50 -08:00
Peter Zijlstra 07f06cb3b5 sched: Start stopper early
Ensure the stopper thread is active 'early', because the load balancer
pretty much assumes that its available. And when 'online && active' the
load-balancer is fully available.

Not only the numa balancing stop_two_cpus() caller relies on it, but
also the self migration stuff does, and at CPU_ONLINE time the cpu
really is 'free' to run anything.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: heiko.carstens@de.ibm.com
Link: http://lkml.kernel.org/r/20151009160054.GA10176@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-20 10:25:55 +02:00
Oleg Nesterov c00166d87e stop_machine: Kill smp_hotplug_thread->pre_unpark, introduce stop_machine_unpark()
1. Change smpboot_unpark_thread() to check ->selfparking, just
   like smpboot_park_thread() does.

2. Introduce stop_machine_unpark() which sets ->enabled and calls
   kthread_unpark().

3. Change smpboot_thread_call() and cpu_stop_init() to call
   stop_machine_unpark() by hand.

This way:

    - IMO the ->selfparking logic becomes more consistent.

    - We can kill the smp_hotplug_thread->pre_unpark() method.

    - We can easily unpark the stopper thread earlier. Say, we
      can move stop_machine_unpark() from smpboot_thread_call()
      to sched_cpu_active() as Peter suggests.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: heiko.carstens@de.ibm.com
Link: http://lkml.kernel.org/r/20151009160049.GA10166@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-20 10:23:55 +02:00
Oleg Nesterov 233e7f267e stop_machine: Ensure that a queued callback will be called before cpu_stop_park()
cpu_stop_queue_work() checks stopper->enabled before it queues the
work, but ->enabled == T can only guarantee cpu_stop_signal_done()
if we race with cpu_down().

This is not enough for stop_two_cpus() or stop_machine(), they will
deadlock if multi_cpu_stop() won't be called by one of the target
CPU's. stop_machine/stop_cpus are fine, they rely on stop_cpus_mutex.
But stop_two_cpus() has to check cpu_active() to avoid the same race
with hotplug, and this check is very unobvious and probably not even
correct if we race with cpu_up().

Change cpu_down() pass to clear ->enabled before cpu_stopper_thread()
flushes the pending ->works and returns with KTHREAD_SHOULD_PARK set.

Note also that smpboot_thread_call() calls cpu_stop_unpark() which
sets enabled == T at CPU_ONLINE stage, so this CPU can't go away until
cpu_stopper_thread() is called at least once. This all means that if
cpu_stop_queue_work() succeeds, we know that work->fn() will be called.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: heiko.carstens@de.ibm.com
Link: http://lkml.kernel.org/r/20151008145131.GA18139@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-20 10:23:53 +02:00
Paul E. McKenney 02ef3c4a2a cpu: Remove try_get_online_cpus()
Now that synchronize_sched_expedited() no longer uses it, there are
no users of try_get_online_cpus() in mainline.  This commit therefore
removes it.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
2015-10-07 16:02:49 -07:00
Oleg Nesterov a75a6068da cpu/hotplug: Read_lock(tasklist_lock) doesn't need to disable irqs
check_for_tasks() doesn't need to disable irqs, recursive
read_lock() from interrupt is fine.

While at it, s/do_each_thread/for_each_process_thread/.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Kirill Tkhai <ktkhai@odin.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Kirill Tkhai <ktkhai@parallels.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150910130750.GA20055@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-09-12 11:54:27 +02:00
Linus Torvalds a1d8561172 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
 "The biggest change in this cycle is the rewrite of the main SMP load
  balancing metric: the CPU load/utilization.  The main goal was to make
  the metric more precise and more representative - see the changelog of
  this commit for the gory details:

    9d89c257df ("sched/fair: Rewrite runnable load and utilization average tracking")

  It is done in a way that significantly reduces complexity of the code:

    5 files changed, 249 insertions(+), 494 deletions(-)

  and the performance testing results are encouraging.  Nevertheless we
  need to keep an eye on potential regressions, since this potentially
  affects every SMP workload in existence.

  This work comes from Yuyang Du.

  Other changes:

   - SCHED_DL updates.  (Andrea Parri)

   - Simplify architecture callbacks by removing finish_arch_switch().
     (Peter Zijlstra et al)

   - cputime accounting: guarantee stime + utime == rtime.  (Peter
     Zijlstra)

   - optimize idle CPU wakeups some more - inspired by Facebook server
     loads.  (Mike Galbraith)

   - stop_machine fixes and updates.  (Oleg Nesterov)

   - Introduce the 'trace_sched_waking' tracepoint.  (Peter Zijlstra)

   - sched/numa tweaks.  (Srikar Dronamraju)

   - misc fixes and small cleanups"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
  sched/deadline: Fix comment in enqueue_task_dl()
  sched/deadline: Fix comment in push_dl_tasks()
  sched: Change the sched_class::set_cpus_allowed() calling context
  sched: Make sched_class::set_cpus_allowed() unconditional
  sched: Fix a race between __kthread_bind() and sched_setaffinity()
  sched: Ensure a task has a non-normalized vruntime when returning back to CFS
  sched/numa: Fix NUMA_DIRECT topology identification
  tile: Reorganize _switch_to()
  sched, sparc32: Update scheduler comments in copy_thread()
  sched: Remove finish_arch_switch()
  sched, tile: Remove finish_arch_switch
  sched, sh: Fold finish_arch_switch() into switch_to()
  sched, score: Remove finish_arch_switch()
  sched, avr32: Remove finish_arch_switch()
  sched, MIPS: Get rid of finish_arch_switch()
  sched, arm: Remove finish_arch_switch()
  sched/fair: Clean up load average references
  sched/fair: Provide runnable_load_avg back to cfs_rq
  sched/fair: Remove task and group entity load when they are dead
  sched/fair: Init cfs_rq's sched_entity load average
  ...
2015-08-31 20:26:22 -07:00
Linus Torvalds 7073bc6612 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
 "The main RCU changes in this cycle are:

   - the combination of tree geometry-initialization simplifications and
     OS-jitter-reduction changes to expedited grace periods.  These two
     are stacked due to the large number of conflicts that would
     otherwise result.

   - privatize smp_mb__after_unlock_lock().

     This commit moves the definition of smp_mb__after_unlock_lock() to
     kernel/rcu/tree.h, in recognition of the fact that RCU is the only
     thing using this, that nothing else is likely to use it, and that
     it is likely to go away completely.

   - documentation updates.

   - torture-test updates.

   - misc fixes"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
  rcu,locking: Privatize smp_mb__after_unlock_lock()
  rcu: Silence lockdep false positive for expedited grace periods
  rcu: Don't disable CPU hotplug during OOM notifiers
  scripts: Make checkpatch.pl warn on expedited RCU grace periods
  rcu: Update MAINTAINERS entry
  rcu: Clarify CONFIG_RCU_EQS_DEBUG help text
  rcu: Fix backwards RCU_LOCKDEP_WARN() in synchronize_rcu_tasks()
  rcu: Rename rcu_lockdep_assert() to RCU_LOCKDEP_WARN()
  rcu: Make rcu_is_watching() really notrace
  cpu: Wait for RCU grace periods concurrently
  rcu: Create a synchronize_rcu_mult()
  rcu: Fix obsolete priority-boosting comment
  rcu: Use WRITE_ONCE in RCU_INIT_POINTER
  rcu: Hide RCU_NOCB_CPU behind RCU_EXPERT
  rcu: Add RCU-sched flavors of get-state and cond-sync
  rcu: Add fastpath bypassing funnel locking
  rcu: Rename RCU_GP_DONE_FQS to RCU_GP_DOING_FQS
  rcu: Pull out wait_event*() condition into helper function
  documentation: Describe new expedited stall warnings
  rcu: Add stall warnings to synchronize_sched_expedited()
  ...
2015-08-31 18:12:07 -07:00