vtimes may wrap and time_before/after64() should be used to determine
whether a given vtime is before or after another. iocg_is_idle() was
incorrectly using plain "<" comparison do determine whether done_vtime
is before vtime. Here, the only thing we're interested in is whether
done_vtime matches vtime which indicates that there's nothing in
flight. Let's test for inequality instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 7caa47151a ("blkcg: implement blk-iocost")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When over-budget IOs are force-issued through root cgroup,
iocg_kick_delay() adjusts the async delay accordingly but doesn't
actually schedule async throttle for the issuing task. This bug is
pretty well masked because sooner or later the offending threads are
gonna get directly throttled on regular IOs or have async delay
scheduled by mem_cgroup_throttle_swaprate().
However, it can affect control quality on filesystem metadata heavy
operations. Let's fix it by invoking blkcg_schedule_throttle() when
iocg_kick_delay() says async delay is needed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 7caa47151a ("blkcg: implement blk-iocost")
Cc: stable@vger.kernel.org
Reported-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a bug that checking the same active_list over and over again
in iocg_activate(). The intention of the code was checking whether all
the ancestors and self have already been activated. So fix it.
Fixes: 7caa47151a ("blkcg: implement blk-iocost")
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This code causes a static analysis warning:
block/blk-iocost.c:2113 ioc_weight_write() error: double lock 'irq'
We disable IRQs in blkg_conf_prep() and re-enable them in
blkg_conf_finish(). IRQ disable/enable should not be nested because
that means the IRQs will be enabled at the first unlock instead of the
second one.
Fixes: 7caa47151a ("blkcg: implement blk-iocost")
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The default hard disk param sets latency targets at 50ms. As the
default target percentiles are zero, these don't directly regulate
vrate; however, they're still used to calculate the period length -
100ms in this case.
This is excessively low. A SATA drive with QD32 saturated with random
IOs can easily reach avg completion latency of several hundred msecs.
A period duration which is substantially lower than avg completion
latency can lead to wildly fluctuating vrate.
Let's bump up the default latency targets to 250ms so that the period
duration is sufficiently long.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some IOs may span multiple periods. As latencies are collected on
completion, the inbetween periods won't register them and may
incorrectly decide to increase vrate. nr_lagging tracks these IOs to
avoid those situations. Currently, whenever there are IOs which are
spanning from the previous period, busy_level is reset to 0 if
negative thus suppressing vrate increase.
This has the following two problems.
* When latency target percentiles aren't set, vrate adjustment should
only be governed by queue depth depletion; however, the current code
keeps nr_lagging active which pulls in latency results and can keep
down vrate unexpectedly.
* When lagging condition is detected, it resets the entire negative
busy_level. This turned out to be way too aggressive on some
devices which sometimes experience extended latencies on a small
subset of commands. In addition, a lagging IO will be accounted as
latency target miss on completion anyway and resetting busy_level
amplifies its impact unnecessarily.
This patch fixes the above two problems by disabling nr_lagging
counting when latency target percentiles aren't set and blocking vrate
increases when there are lagging IOs while leaving busy_level as-is.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
vrate_adj tracepoint traces vrate changes; however, it does so only
when busy_level is non-zero. busy_level turning to zero can sometimes
be as interesting an event. This patch also enables vrate_adj
tracepoint on other vrate related events - busy_level changes and
non-zero nr_lagging.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merges have the same problem that forced-bios had which is fixed by
the previous patch. The cost of a merge is calculated at the time of
issue and force-advances vtime into the future. Until global vtime
catches up, how the cgroup's hweight changes in the meantime doesn't
matter and it often leads to situations where the cost is calculated
at one hweight and paid at a very different one. See the previous
patch for more details.
Fix it by never advancing vtime into the future for merges. If budget
is available, vtime is advanced. Otherwise, the cost is charged as
debt.
This brings merge cost handling in line with issue cost handling in
ioc_rqos_throttle().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, when a bio needs to be force-charged and there isn't enough
budget, vtime is simply pushed into the future. This means that the
cost of the whole bio is scaled using the current hweight and then
charged immediately. Until the global vtime advances beyond this
future vtime, the cgroup won't be allowed to issue normal IOs.
This is incorrect and can lead to, for example, exploding vrate or
extended stalls if vrate range is constrained. Consider the following
scenario.
1. A cgroup with a very low hweight runs out of budget.
2. A storm of swap-out happens on it. All of them are scaled
according to the current low hweight and charged to vtime pushing
it to a far future.
3. All other cgroups go idle and now the above cgroup has access to
the whole device. However, because vtime is already wound using
the past low hweight, what its current hweight is doesn't matter
until global vtime catches up to the local vtime.
4. As a result, either vrate gets ramped up extremely or the IOs stall
while the underlying device is idle.
This is because the hweight the overage is calculated at is different
from the hweight that it's being paid at.
Fix it by remembering the overage in absoulte vtime and continuously
paying with the actual budget according to the current hweight at each
period.
Note that non-forced bios which wait already remembers the cost in
absolute vtime. This brings forced-bio accounting in line.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ioc_pd_free() first cancels the hrtimers and then deactivates the
iocg. However, the iocg timer can run inbetween and reschedule the
hrtimers which will end up running after the iocg is freed leading to
crashes like the following.
general protection fault: 0000 [#1] SMP
...
RIP: 0010:iocg_kick_delay+0xbe/0x1b0
RSP: 0018:ffffc90003598ea0 EFLAGS: 00010046
RAX: 1cee00fd69512b54 RBX: ffff8881bba48400 RCX: 00000000000003e8
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8881bba48400
RBP: 0000000000004e20 R08: 0000000000000002 R09: 00000000000003e8
R10: 0000000000000000 R11: 0000000000000000 R12: ffffc90003598ef0
R13: 00979f3810ad461f R14: ffff8881bba4b400 R15: 25439f950d26e1d1
FS: 0000000000000000(0000) GS:ffff88885f800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f64328c7e40 CR3: 0000000002409005 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
iocg_delay_timer_fn+0x3d/0x60
__hrtimer_run_queues+0xfe/0x270
hrtimer_interrupt+0xf4/0x210
smp_apic_timer_interrupt+0x5e/0x120
apic_timer_interrupt+0xf/0x20
</IRQ>
Fix it by canceling hrtimers after deactivating the iocg.
Fixes: 7caa47151a ("blkcg: implement blk-iocost")
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_iocost_init() forgot to free its percpu stat on the error path.
Fix it.
Fixes: 7caa47151a ("blkcg: implement blk-iocost")
Reported-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a script which can be used to generate device-specific iocost
linear model coefficients.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patchset implements IO cost model based work-conserving
proportional controller.
While io.latency provides the capability to comprehensively prioritize
and protect IOs depending on the cgroups, its protection is binary -
the lowest latency target cgroup which is suffering is protected at
the cost of all others. In many use cases including stacking multiple
workload containers in a single system, it's necessary to distribute
IO capacity with better granularity.
One challenge of controlling IO resources is the lack of trivially
observable cost metric. The most common metrics - bandwidth and iops
- can be off by orders of magnitude depending on the device type and
IO pattern. However, the cost isn't a complete mystery. Given
several key attributes, we can make fairly reliable predictions on how
expensive a given stream of IOs would be, at least compared to other
IO patterns.
The function which determines the cost of a given IO is the IO cost
model for the device. This controller distributes IO capacity based
on the costs estimated by such model. The more accurate the cost
model the better but the controller adapts based on IO completion
latency and as long as the relative costs across differents IO
patterns are consistent and sensible, it'll adapt to the actual
performance of the device.
Currently, the only implemented cost model is a simple linear one with
a few sets of default parameters for different classes of device.
This covers most common devices reasonably well. All the
infrastructure to tune and add different cost models is already in
place and a later patch will also allow using bpf progs for cost
models.
Please see the top comment in blk-iocost.c and documentation for
more details.
v2: Rebased on top of RQ_ALLOC_TIME changes and folded in Rik's fix
for a divide-by-zero bug in current_hweight() triggered by zero
inuse_sum.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andy Newell <newella@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Weiping Zhang