We emulate arithmetic opcodes by executing a "similar" (same operation,
different operands) on the cpu. This ensures accurate emulation, esp. wrt.
eflags. However, the prologue and epilogue around the opcode is fairly long,
consisting of a switch (for the operand size) and code to load and save the
operands. This is repeated for every opcode.
This patch introduces an alternative way to emulate arithmetic opcodes.
Instead of the above, we have four (three on i386) functions consisting
of just the opcode and a ret; one for each operand size. For example:
.align 8
em_notb:
not %al
ret
.align 8
em_notw:
not %ax
ret
.align 8
em_notl:
not %eax
ret
.align 8
em_notq:
not %rax
ret
The prologue and epilogue are shared across all opcodes. Note the functions
use a special calling convention; notably eflags is an input/output parameter
and is not clobbered. Rather than dispatching the four functions through a
jump table, the functions are declared as a constant size (8) so their address
can be calculated.
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
According to Intel SDM Vol3 Section 5.5 "Privilege Levels" and 5.6
"Privilege Level Checking When Accessing Data Segments" RPL checking is
done during loading of a segment selector, not during data access. We
already do checking during segment selector loading, so drop the check
during data access. Checking RPL during data access triggers #GP if
after transition from real mode to protected mode RPL bits in a segment
selector are set.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
MOV immediate instruction (opcodes 0xB8-0xBF) may take 64-bit operand.
The previous emulation implementation assumes the operand is no longer than 32.
Adding OpImm64 for this matter.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=881579
Signed-off-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Pull KVM updates from Marcelo Tosatti:
"Considerable KVM/PPC work, x86 kvmclock vsyscall support,
IA32_TSC_ADJUST MSR emulation, amongst others."
Fix up trivial conflict in kernel/sched/core.c due to cross-cpu
migration notifier added next to rq migration call-back.
* tag 'kvm-3.8-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (156 commits)
KVM: emulator: fix real mode segment checks in address linearization
VMX: remove unneeded enable_unrestricted_guest check
KVM: VMX: fix DPL during entry to protected mode
x86/kexec: crash_vmclear_local_vmcss needs __rcu
kvm: Fix irqfd resampler list walk
KVM: VMX: provide the vmclear function and a bitmap to support VMCLEAR in kdump
x86/kexec: VMCLEAR VMCSs loaded on all cpus if necessary
KVM: MMU: optimize for set_spte
KVM: PPC: booke: Get/set guest EPCR register using ONE_REG interface
KVM: PPC: bookehv: Add EPCR support in mtspr/mfspr emulation
KVM: PPC: bookehv: Add guest computation mode for irq delivery
KVM: PPC: Make EPCR a valid field for booke64 and bookehv
KVM: PPC: booke: Extend MAS2 EPN mask for 64-bit
KVM: PPC: e500: Mask MAS2 EPN high 32-bits in 32/64 tlbwe emulation
KVM: PPC: Mask ea's high 32-bits in 32/64 instr emulation
KVM: PPC: e500: Add emulation helper for getting instruction ea
KVM: PPC: bookehv64: Add support for interrupt handling
KVM: PPC: bookehv: Remove GET_VCPU macro from exception handler
KVM: PPC: booke: Fix get_tb() compile error on 64-bit
KVM: PPC: e500: Silence bogus GCC warning in tlb code
...
In real mode CS register is writable, so do not #GP on write.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
In __emulate_1op_rax_rdx, we use "+a" and "+d" which are input/output
constraints, and *then* use "a" and "d" as input constraints. This is
incorrect, but happens to work on some versions of gcc.
However, it breaks gcc with -O0 and icc, and may break on future
versions of gcc.
Reported-and-tested-by: Melanie Blower <melanie.blower@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/B3584E72CFEBED439A3ECA9BCE67A4EF1B17AF90@FMSMSX107.amr.corp.intel.com
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Optimize "rep ins" by allowing emulator to write back more than one
datum at a time. Introduce new operand type OP_MEM_STR which tells
writeback() that dst contains pointer to an array that should be written
back as opposite to just one data element.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Remove unneeded segment argument. Address structure already has correct
segment which was put there during decode.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
We never change emulate_ops[] at runtime so it should be r/o.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The opcode tables never change at runtime, therefor mark them const.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
As the the compiler ensures that the memory operand is always aligned
to a 16 byte memory location, use the aligned variant of MOVDQ for
read_sse_reg() and write_sse_reg().
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Segment limits are verified in real mode, not just protected mode.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When loading a segment in real mode, only the base and selector must
be modified. The limit needs to be left alone, otherwise big real mode
users will hit a #GP due to limit checking (currently this is suppressed
because we don't check limits in real mode).
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Instead of populating the entire register file, read in registers
as they are accessed, and write back only the modified ones. This
saves a VMREAD and VMWRITE on Intel (for rsp, since it is not usually
used during emulation), and a two 128-byte copies for the registers.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Merging critical fixes from upstream required for development.
* upstream/master: (809 commits)
libata: Add a space to " 2GB ATA Flash Disk" DMA blacklist entry
Revert "powerpc: Update g5_defconfig"
powerpc/perf: Use pmc_overflow() to detect rolled back events
powerpc: Fix VMX in interrupt check in POWER7 copy loops
powerpc: POWER7 copy_to_user/copy_from_user patch applied twice
powerpc: Fix personality handling in ppc64_personality()
powerpc/dma-iommu: Fix IOMMU window check
powerpc: Remove unnecessary ifdefs
powerpc/kgdb: Restore current_thread_info properly
powerpc/kgdb: Bail out of KGDB when we've been triggered
powerpc/kgdb: Do not set kgdb_single_step on ppc
powerpc/mpic_msgr: Add missing includes
powerpc: Fix null pointer deref in perf hardware breakpoints
powerpc: Fixup whitespace in xmon
powerpc: Fix xmon dl command for new printk implementation
xfs: check for possible overflow in xfs_ioc_trim
xfs: unlock the AGI buffer when looping in xfs_dialloc
xfs: fix uninitialised variable in xfs_rtbuf_get()
powerpc/fsl: fix "Failed to mount /dev: No such device" errors
powerpc/fsl: update defconfigs
...
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The sub-register used to access the stack (sp, esp, or rsp) is not
determined by the address size attribute like other memory references,
but by the stack segment's B bit (if not in x86_64 mode).
Fix by using the existing stack_mask() to figure out the correct mask.
This long-existing bug was exposed by a combination of a27685c33a
(emulate invalid guest state by default), which causes many more
instructions to be emulated, and a seabios change (possibly a bug) which
causes the high 16 bits of esp to become polluted across calls to real
mode software interrupts.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
setup_syscalls_segments() calls get_segment() and than overwrites all
but one of the structure fields and this one should also be overwritten
anyway, so we can drop call to get_segment() and avoid a couple of vmreads
on vmx. Also drop zeroing ss/cs structures since most of the fields are
set anyway. Just set those that were not set explicitly.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
No need split mmio read region into 8-bits pieces since we do it in
emulator_read_write_onepage
Changelog:
Add a WARN_ON to check read-cache overflow
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Guest software doesn't actually depend on it, but vmx will refuse us
entry if we don't. Set the bit in both the cached segment and memory,
just to be nice.
Signed-off-by: Avi Kivity <avi@redhat.com>
Opcode C8.
Only ENTER with lexical nesting depth 0 is implemented, since others are
very rare. We'll fail emulation if nonzero lexical depth is used so data
is not corrupted.
Signed-off-by: Avi Kivity <avi@redhat.com>
Commit 2adb5ad9fe removed ByteOp from MOVZX/MOVSX, replacing them by
SrcMem8, but neglected to fix the dependency in the emulation code
on ByteOp. This caused the instruction not to have any effect in
some circumstances.
Fix by replacing the check for ByteOp with the equivalent src.op_bytes == 1.
Signed-off-by: Avi Kivity <avi@redhat.com>
We correctly default to SS when BP is used as a base in 16-bit address mode,
but we don't do that for 32-bit mode.
Fix by adjusting the default to SS when either ESP or EBP is used as the base
register.
Signed-off-by: Avi Kivity <avi@redhat.com>
The operand size for these instructions is 8 bytes in long mode, even without
a REX prefix. Set it explicitly.
Triggered while booting Linux with emulate_invalid_guest_state=1.
Signed-off-by: Avi Kivity <avi@redhat.com>
Opcode 0F A2.
Used by Linux during the mode change trampoline while in a state that is
not virtualizable on vmx without unrestricted_guest, so we need to emulate
it is emulate_invalid_guest_state=1.
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of getting an exact leaf, follow the spec and fall back to the last
main leaf instead. This lets us easily emulate the cpuid instruction in the
emulator.
Signed-off-by: Avi Kivity <avi@redhat.com>
The instruction emulation for bsrw is broken in KVM because
the code always uses bsr with 32 or 64 bit operand size for
emulation. Fix that by using emulate_2op_SrcV_nobyte() macro
to use guest operand size for emulation.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Although ModRM byte is fetched for group decoding, it is soon pushed
back to make decode_modrm() fetch it later again.
Now that ModRM flag can be found in the top level opcode tables, fetch
ModRM byte before group decoding to make the code simpler.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
Needed for the following patch which simplifies ModRM fetching code.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
General support for the MMX instruction set. Special care is taken
to trap pending x87 exceptions so that they are properly reflected
to the guest.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
An Ubuntu 9.10 Karmic Koala guest is unable to boot or install due to
missing movdqa emulation:
kvm_exit: reason EXCEPTION_NMI rip 0x7fef3e025a7b info 7fef3e799000 80000b0e
kvm_page_fault: address 7fef3e799000 error_code f
kvm_emulate_insn: 0:7fef3e025a7b: 66 0f 7f 07 (prot64)
movdqa %xmm0,(%rdi)
[avi: mark it explicitly aligned]
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
x86 defines three classes of vector instructions: explicitly
aligned (#GP(0) if unaligned, explicitly unaligned, and default
(which depends on the encoding: AVX is unaligned, SSE is aligned).
Add support for marking an instruction as explicitly aligned or
unaligned, and mark MOVDQU as unaligned.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Task switches can switch between Protected Mode and VM86. The current
mode must be updated during the task switch emulation so that the new
segment selectors are interpreted correctly.
In order to let privilege checks succeed, rflags needs to be updated in
the vcpu struct as this causes a CPL update.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Setting the segment DPL to 0 for at least the VM86 code segment makes
the VM entry fail on VMX.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently, all task switches check privileges against the DPL of the
TSS. This is only correct for jmp/call to a TSS. If a task gate is used,
the DPL of this take gate is used for the check instead. Exceptions,
external interrupts and iret shouldn't perform any check.
[avi: kill kvm-kmod remnants]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If the guest thinks it's an AMD, it will not have prepared the SYSENTER MSRs,
and if the guest executes SYSENTER in compatibility mode, it will fails.
Detect this condition and #UD instead, like the spec says.
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently we treat MOVSX/MOVZX with a byte source as a byte instruction,
and change the destination operand size with a hack. Change it to be
a word instruction, so the destination receives its natural size, and
change the source to be SrcMem8.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
On hosts without this patch, 32bit guests will crash (and 64bit guests
may behave in a wrong way) for example by simply executing following
nasm-demo-application:
[bits 32]
global _start
SECTION .text
_start: syscall
(I tested it with winxp and linux - both always crashed)
Disassembly of section .text:
00000000 <_start>:
0: 0f 05 syscall
The reason seems a missing "invalid opcode"-trap (int6) for the
syscall opcode "0f05", which is not available on Intel CPUs
within non-longmodes, as also on some AMD CPUs within legacy-mode.
(depending on CPU vendor, MSR_EFER and cpuid)
Because previous mentioned OSs may not engage corresponding
syscall target-registers (STAR, LSTAR, CSTAR), they remain
NULL and (non trapping) syscalls are leading to multiple
faults and finally crashs.
Depending on the architecture (AMD or Intel) pretended by
guests, various checks according to vendor's documentation
are implemented to overcome the current issue and behave
like the CPUs physical counterparts.
[mtosatti: cleanup/beautify code]
Signed-off-by: Stephan Baerwolf <stephan.baerwolf@tu-ilmenau.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
RDPMC is only privileged if CR4.PCE=0. check_rdpmc() already implements this,
so all we need to do is drop the Priv flag.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Group 9: 0F C7
Rename em_grp9() to em_cmpxchg8b() and register it.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
This was probably copy&pasted from the cr0 case, but it's unneeded here.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
INSB : 6C
INSW/INSD : 6D
OUTSB : 6E
OUTSW/OUTSD: 6F
The I/O port address is read from the DX register when we decode the
operand because we see the SrcDX/DstDX flag is set.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
If the emulation is caused by #PF and it is non-page_table writing instruction,
it means the VM-EXIT is caused by shadow page protected, we can zap the shadow
page and retry this instruction directly
The idea is from Avi
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The idea is from Avi:
| tag instructions that are typically used to modify the page tables, and
| drop shadow if any other instruction is used.
| The list would include, I'd guess, and, or, bts, btc, mov, xchg, cmpxchg,
| and cmpxchg8b.
This patch is used to tag the instructions and in the later path, shadow page
is dropped if it is written by other instructions
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The opcodes
push %seg
pop %seg
l%seg, %mem, %reg (e.g. lds/les/lss/lfs/lgs)
all have an segment register encoded in the instruction. To allow reuse,
decode the segment number into src2 during the decode stage instead of the
execution stage.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Use the same technique as the other OpMem variants, and goto mem_common.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
OpReg decoding has a hack that inhibits byte registers for movsx and movzx
instructions. It should be replaced by something better, but meanwhile,
qualify that the hack is only active for the destination operand.
Note these instructions only use OpReg for the destination, but better to
be explicit about it.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Op fields are going to grow by a bit, we need two free bits.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Unifiying the operands means not taking advantage of the fact that some
operand types can only go into certain operands (for example, DI can only
be used by the destination), so we need more bits to hold the operand type.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Instead of decoding each operand using its own code, use a generic
function. Start with the destination operand.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The TEST instruction doesn't write its destination operand. This
could cause problems if an MMIO register was accessed using the TEST
instruction. Recently Windows XP was observed to use TEST against
the APIC ICR; this can cause spurious IPIs.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
emulate_1op_rax_rdx() is always called with the same parameters. Simplify
by passing just the emulation context.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We have two emulate-with-extended-accumulator implementations: once
which expect traps (_ex) and one which doesn't (plain). Drop the
plain implementation and always use the one which expects traps;
it will simply return 0 in the _ex argument and we can happily ignore
it.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
emulate_1op() is always called with the same parameters. Simplify
by passing just the emulation context.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
emulate_2op_cl() is always called with the same parameters. Simplify
by passing just the emulation context.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
emulate_2op_cl() is always called with the same parameters. Simplify
by passing just the emulation context.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
emulate_2op_SrcV(), and its siblings, emulate_2op_SrcV_nobyte()
and emulate_2op_SrcB(), all use the same calling conventions
and all get passed exactly the same parameters. Simplify them
by passing just the emulation context.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Return EMULATION_OK/FAILED consistently. Also treat instruction fetch
errors, not restricted to X86EMUL_UNHANDLEABLE, as EMULATION_FAILED;
although this cannot happen in practice, the current logic will continue
the emulation even if the decoder fails to fetch the instruction.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
Fetching the instruction which was to be executed by the guest cannot
fail normally. So compiler should always predict that it will succeed.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of passing ctxt->_eip from insn_fetch() call sites, get it from
ctxt in do_insn_fetch_byte(). This is done by replacing the argument
_eip of insn_fetch() with _ctxt, which should be better than letting the
macro use ctxt silently in its body.
Though this changes the place where ctxt->_eip is incremented from
insn_fetch() to do_insn_fetch_byte(), this does not have any real
effect.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
Src2CL decode (used for double width shifts) erronously decodes only bit 3
of %rcx, instead of bits 7:0.
Fix by decoding %cl in its entirety.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This saves a lot of pointless casts x86_emulate_ctxt and decode_cache.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The name eip conflicts with a field of the same name in x86_emulate_ctxt,
which we plan to fold decode_cache into.
The name _eip is unfortunate, but what's really needed is a refactoring
here, not a better name.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Different functions for those which take segment register operands.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
In addition, replace one "goto xchg" with an em_xchg() call.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The next patch will change these to be called by opcode::execute.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We should use the local variables ctxt and c when the emulate_ctxt and
decode appears many times. At least, we need to be consistent about
how we use these in a function.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Fix:
warning: ‘cs_sel’ may be used uninitialized in this function
warning: ‘ss_sel’ may be used uninitialized in this function
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Dereference it in the actual users.
This not only cleans up the emulator but also makes it easy to convert
the old emulation functions to the new em_xxx() form later.
Note: Remove some inline keywords to let the compiler decide inlining.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Dereference it in the actual users: only do_insn_fetch_byte().
This is consistent with the way __linearize() dereferences it.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The two macros need special care to use:
Assume rc, ctxt, ops and done exist outside of them.
Can goto outside.
Considering the fact that these are used only in decode functions,
moving these right after do_insn_fetch() seems to be a right thing
to improve the readability.
We also rename do_fetch_insn_byte() to do_insn_fetch_byte() to be
consistent.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
%rip-relative addressing is relative to the first byte of the next instruction,
so we need to add %rip only after we've fetched any immediate bytes.
Based on original patch by Li Xin <xin.li@intel.com>.
Signed-off-by: Avi Kivity <avi@redhat.com>
Acked-by: Li Xin <xin.li@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Commit f6511935f4 moved the permission check for io instructions
to the ->check_perm callback. It failed to copy the port value from RDX
register for string and "in,out ax,dx" instructions.
Fix it by reading RDX register at decode stage when appropriate.
Fixes FC8.32 installation.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We introduce em_jmp_far().
We also call this from em_grp45() to stop treating modrm_reg == 5 case
separately in the group 5 emulation.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
The prototypes are changed appropriately.
We also replaces "goto grp45;" with simple em_grp45() call.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
The opt of emulate_grp1a() is also removed.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
In addition, one comma at the end of a statement is replaced with a
semicolon.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of separate accessors for the segment selector and cached descriptor,
use one accessor for both. This simplifies the code somewhat.
Signed-off-by: Avi Kivity <avi@redhat.com>
Move all groups into a single field and handle them in a single place. This
saves bits when we add more group types (3 bits -> 7 groups types).
Signed-off-by: Avi Kivity <avi@redhat.com>
For this, emulate_pusha/popa() are converted to em_pusha/popa().
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
In addition, the RET emulation is changed to call em_pop() to remove
the pop_instruction label.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
The following instructions are changed to use opcode::execute.
Group 1 (80-83)
ADD (00-05), OR (08-0D), ADC (10-15), SBB (18-1D), AND (20-25),
SUB (28-2D), XOR (30-35), CMP (38-3D)
CMPS (A6-A7), SCAS (AE-AF)
The last two do the same as CMP in the emulator, so em_cmp() is used.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
While it isn't defined, no need to force a #UD. If it becomes defined
in the future this can cause wierd problems for the guest.
Signed-off-by: Avi Kivity <avi@redhat.com>
arch/x86/kvm/emulate.c:2598: warning: integer constant is too large for 'long' type
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Commit 0b56652e33c72092956c651ab6ceb9f0ad081153 fails to build:
CC [M] arch/x86/kvm/emulate.o
arch/x86/kvm/emulate.c: In function 'x86_emulate_insn':
arch/x86/kvm/emulate.c:4095:25: error: macro "wbinvd" passed 1 arguments, but takes just 0
arch/x86/kvm/emulate.c:4095:3: warning: statement with no effect
make[2]: *** [arch/x86/kvm/emulate.o] Error 1
make[1]: *** [arch/x86/kvm] Error 2
make: *** [arch/x86] Error 2
Work around this for now.
Signed-off-by: Clemens Noss <cnoss@gmx.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
Avoid using ctxt->vcpu; we can do everything with ->get_cr() and ->set_cr().
A side effect is that we no longer activate the fpu on emulated CLTS; but that
should be very rare.
Signed-off-by: Avi Kivity <avi@redhat.com>
Making the emulator caller agnostic.
[Takuya Yoshikawa: fix typo leading to LDT failures]
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
Since segments need to be handled slightly differently when fetching
instructions, we add a __linearize helper that accepts a new 'fetch' boolean.
[avi: fix oops caused by wrong segmented_address initialization order]
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently, setting a large (i.e. negative) base address for %cs does not work on
a 64-bit host. The "JOS" teaching operating system, used by MIT and other
universities, relies on such segments while bootstrapping its way to full
virtual memory management.
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
em_push() is a simple wrapper of emulate_push(). So this patch replaces
emulate_push() with em_push() and removes the unnecessary former.
In addition, the unused ops arguments are removed from emulate_pusha()
and emulate_grp45().
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
PUSH emulation stores the value by calling writeback() after setting
the dst operand appropriately in emulate_push().
This writeback() using dst is not needed at all because we know the
target is the stack. So this patch makes emulate_push() call, newly
introduced, segmented_write() directly.
By this, many inlined writeback()'s are removed.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
This stops "CMP r/m, reg" to write back the data into memory.
Pointed out by Avi.
The writeback suppression now covers CMP, CMPS, SCAS.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
VMMCALL needs the VendorSpecific tag so that #UD emulation
(called if a guest running on AMD was migrated to an Intel host)
is allowed to process the instruction.
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds code to check for IOIO intercepts on
instructions decoded by the KVM instruction emulator.
[avi: fix build error due to missing #define D2bvIP]
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch add intercept checks for emulated one-byte
instructions to the KVM instruction emulation path.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds intercepts checks for the remaining twobyte
instructions to the KVM instruction emulator.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch implements the emulator intercept checks for the
RDTSCP, MONITOR, and MWAIT instructions.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds the necessary code changes in the
instruction emulator and the extensions to svm.c to
implement intercept checks for the svm instructions.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch add intercept checks into the KVM instruction
emulator to check for the 8 instructions that access the
descriptor table addresses.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds the intercept checks for instruction
accessing the debug registers.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds all necessary intercept checks for
instructions that access the crX registers.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds a callback into kvm_x86_ops so that svm and
vmx code can do intercept checks on emulated instructions.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds a flag for the opcoded to tag instruction
which are only recognized in protected mode. The necessary
check is added too.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds a check_perm callback for each opcode into
the instruction emulator. This will be used to do all
necessary permission checks on instructions before checking
whether they are intercepted or not.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch prevents the changed CPU state to be written back
when the emulator detected that the instruction was
intercepted by the guest.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add intercept codes for instructions defined by SVM as
interceptable.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
When running in guest mode, certain instructions can be intercepted by
hardware. This also holds for nested guests running on emulated
virtualization hardware, in particular instructions emulated by kvm
itself.
This patch adds a framework for intercepting instructions. If an
instruction is marked for interception, and if we're running in guest
mode, a callback is called to check whether an intercept is needed or
not. The callback is called at three points in time: immediately after
beginning execution, after checking privilge exceptions, and after
checking memory exception. This suits the different interception points
defined for different instructions and for the various virtualization
instruction sets.
In addition, a new X86EMUL_INTERCEPT is defined, which any callback or
memory access may define, allowing the more complicated intercepts to be
implemented in existing callbacks.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Most SIMD instructions use the 66/f2/f3 prefixes to distinguish between
different variants of the same instruction. Usually the encoding is quite
regular, but in some cases (including non-SIMD instructions) the prefixes
generate very different instructions. Examples include XCHG/PAUSE,
MOVQ/MOVDQA/MOVDQU, and MOVBE/CRC32.
Allow the emulator to handle these special cases by splitting such opcodes
into groups, with different decode flags and execution functions for different
prefixes.
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently we store a rep prefix as 1 or 2 depending on whether it is a REPE or
REPNE. Since sse instructions depend on the prefix value, store it as the
original opcode to simplify things further on.
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently if io port + len crosses 8bit boundary in io permission bitmap the
check may allow IO that otherwise should not be allowed. The patch fixes that.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Current implementation truncates upper 32bit of TR base address during IO
permission bitmap check. The patch fixes this.
Reported-and-tested-by: Francis Moreau <francis.moro@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Mark some instructions as vendor specific, and allow the caller to request
emulation only of vendor specific instructions. This is useful in some
circumstances (responding to a #UD fault).
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
In case of a nested page fault or an intercepted #PF newer SVM
implementations provide a copy of the faulting instruction bytes
in the VMCB.
Use these bytes to feed the instruction emulator and avoid the costly
guest instruction fetch in this case.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Immediately after we generate an exception, we want a X86EMUL_PROPAGATE_FAULT
constant, so return it from the generation functions.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Instead of checking for X86EMUL_PROPAGATE_FAULT, check for any error,
making the callers more reliable.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If rc == X86EMUL_PROPAGATE_FAULT, we would have returned earlier.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Introduce a structure that can contain an exception to be passed back
to main kvm code.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Linear addresses are supposed to already have segment checks performed on them;
if we play with these addresses the checks become invalid.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Currently the x86 emulator converts the segment register associated with
an operand into a segment base which is added into the operand address.
This loss of information results in us not doing segment limit checks properly.
Replace struct operand's addr.mem field by a segmented_address structure
which holds both the effetive address and segment. This will allow us to
do the limit check at the point of access.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Failed emulation is reported via a tracepoint; the cmps printk is pointless.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Eliminate:
arch/x86/kvm/emulate.c:801: warning: ‘sv’ may be used uninitialized in this
function
on gcc 4.1.2
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
KVM currently ignores fetch faults in the instruction
emulator. With nested-npt we could have such faults. This
patch adds the code to handle these.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch introduces a struct with two new fields in
vcpu_arch for x86:
* fault.address
* fault.error_code
This will be used to correctly propagate page faults back
into the guest when we could have either an ordinary page
fault or a nested page fault. In the case of a nested page
fault the fault-address is different from the original
address that should be walked. So we need to keep track
about the real fault-address.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
x86_emulate_insn() is full of things like
if (rc != X86EMUL_CONTINUE)
goto done;
break;
consolidate all of those at the end of the switch statement.
Signed-off-by: Avi Kivity <avi@redhat.com>
The ALU opcode block is very regular; introduce D6ALU() to define decode
flags for 6 instructions at a time.
Suggested by Paolo Bonzini.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Many x86 instructions come in byte and word variants distinguished with bit
0 of the opcode. Add macros to aid in defining them.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
SrcMemFAddr is not defined with the modrm operand designating a register
instead of a memory address.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
x86_emulate_insn() will return 1 if instruction can be restarted
without re-entering a guest.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Most x86 two operand instructions allow the destination to be a memory operand,
but IMUL (for example) requires that the destination be a register. Change
____emulate_2op() to take a register for both source and destination so we
can invoke IMUL.
Signed-off-by: Avi Kivity <avi@redhat.com>
emulate_push() only schedules a push; it doesn't actually push anything.
Call writeback() to flush out the write.
Signed-off-by: Avi Kivity <avi@redhat.com>
Change OUT instruction to use dst instead of src, so we can
reuse those code for all out instructions.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Introduce DstImmUByte for dst operand decode, which
will be used for out instruction.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Introduce function write_register_operand() to write back the
register operand.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Avi Kivity