At the moment, using the ARM32 multi_v7_defconfig always results in two
SoCs being exposed in sysfs. This is wrong, as far as I'm aware the
Qualcomm DragonBoard 410c does not actually make use of a i.MX SoC. :)
qcom-db410c:/sys/devices/soc0$ grep . *
family:Freescale i.MX
machine:Qualcomm Technologies, Inc. APQ 8016 SBC
revision:0.0
serial_number:0000000000000000
soc_id:Unknown
qcom-db410c:/sys/devices/soc1$ grep . *
family:Snapdragon
machine:APQ8016
...
This happens because imx_soc_device_init() registers the soc device
unconditionally, even when running on devices that do not make use of i.MX.
Arnd already reported this more than a year ago and even suggested a fix
similar to this commit, but for some reason it was never submitted.
Fix it by checking if the "__mxc_cpu_type" variable was actually
initialized by earlier platform code. On devices without i.MX it will
simply stay 0.
Cc: Peng Fan <peng.fan@nxp.com>
Fixes: d2199b3487 ("ARM: imx: use device_initcall for imx_soc_device_init")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/CAK8P3a0hxO1TmK6oOMQ70AHSWJnP_CAq57YMOutrxkSYNjFeuw@mail.gmail.com/
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Replace container_of for converting a generic_pm_domain to a
zynqmp_pm_domain with a macro definition to simplify the code.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Rajan Vaja <rajan.vaja@xilinx.com>
Link: https://lore.kernel.org/r/20210825150313.4033156-5-m.tretter@pengutronix.de
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Instead of defining a flags field and a single bit in this field to
signal that a PM node has been requested, use a boolean field with a
descriptive name.
No functional change, but using a proper name instead of flags makes the
code easier to read.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Rajan Vaja <rajan.vaja@xilinx.com>
Link: https://lore.kernel.org/r/20210825150313.4033156-4-m.tretter@pengutronix.de
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Use dev_err/dev_dbg instead of pr_err/pr_debug.
Add the PM node ids to supplement the (arbitrary) power domain names to
include information which PM nodes are requested by the driver.
Drop function names from the messages, because they can easily be added
with dynamic debug.
Remove comments explaining that error messages are printed on errors.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Rajan Vaja <rajan.vaja@xilinx.com>
Link: https://lore.kernel.org/r/20210825150313.4033156-3-m.tretter@pengutronix.de
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
PM_INIT_FINALIZE tells the PMU FW that Linux is able to handle the power
management nodes that are provided by the PMU FW. Nodes that are not
requested are shut down after this call.
Calling PM_INIT_FINALIZE from the zynqmp_power driver is wrong. The PM
node request mechanism is implemented in the zynqmp_pm_domains driver,
which must also call PM_INIT_FINALIZE.
Due to the behavior of the PMU FW, all devices must be powered up before
PM_INIT_FINALIZE is called, because otherwise the devices might
misbehave. Calling PM_INIT_FINALIZE from the sync_state device callback
ensures that all users probed successfully before the PMU FW is allowed
to power off unused domains.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Rajan Vaja <rajan.vaja@xilinx.com>
Link: https://lore.kernel.org/r/20210825150313.4033156-2-m.tretter@pengutronix.de
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Add support for R-Car S4-8 (R8A779F0) to the R-Car RST driver.
The register map of R-Car S4-8 is the same as R-Car V3U so that
renames "V3U" and "r8a779a0" to "Gen4".
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20211201073308.1003945-11-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Implements genpd and reset providers for downstream devices. Each
instance of the driver binds to a single register and represents a
single SoC power domain.
The driver does not currently implement all features (clockgate-only
state, misc flags), but we declare the respective registers for
documentation purposes. These features will be added as they become
useful for downstream devices.
This also creates the apple/soc tree and Kconfig submenu.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Most of the blk-ctrl reset bits are found in one register, however
there are two bits in offset 8 for pulling the MIPI DPHY out of reset
and one of them needs to be set when IMX8MM_DISPBLK_PD_MIPI_CSI is brought
out of reset or the MIPI_CSI hangs.
Since MIPI_DSI is impacted, add the additional one for MIPI_DSI too.
Fixes: 926e57c065 ("soc: imx: imx8m-blk-ctrl: add DISP blk-ctrl")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
With Xilinx Event Management driver, all types of events like power and
error gets handled from single place as part of event management driver.
So power events(SUSPEND_POWER_REQUEST and SUSPEND_SYSTEM_SHUTDOWN)
also gets handled by event management driver instead of zynqmp_power
driver.
zynqmp-power driver use event management driver and provide callback
function for Suspend and shutdown handler, which will be called by event
management driver when respective event is arrived.
If event management driver is not available than use ipi-mailbox rx channel
or IPI interrupt IRQ handler for power events (suspend/shutdown) same as
current zynqmp-power driver.
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Link: https://lore.kernel.org/r/20211129070216.30253-4-abhyuday.godhasara@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xilinx event management driver provides an interface to subscribe or
unsubscribe for the event/callback supported by firmware. An agent can use
this driver to register for Error Event, Device Event and Suspend callback.
This driver only allows one agent per event to do registration. Driver will
return an error in case of multiple registration for the same event.
This driver gets notification from firmware through TF-A as SGI. During
initialization, event manager driver register handler for SGI used for
notification. It also provides SGI number info to TF-A by using
IOCTL_REGISTER_SGI call to TF-A.
After receiving notification from firmware, the driver makes an SMC call to
TF-A to get IPI data. From the IPI data provided by TF-A, event manager
identified the cause of event and forward that event/callback notification
to the respective subscribed driver. After this, in case of Error Event,
driver performs unregistration as firmware expecting from agent to do
re-registration if the agent wants to get notified on the second occurrence
of an error event.
Add new IOCTL id IOCTL_REGISTER_SGI = 25 which is used to register SGI on
TF-A.
Older firmware doesn't have all required support for event handling which
is required by the event manager driver. So add check for the register
notifier version in the event manager driver.
Xilinx event management driver provides support to subscribe for multiple
error events with the use of Event Mask in a single call of
xlnx_register_event(). Agent driver can provide 'Event' parameter value as
ORed of multiple event masks to register single callback for multiple
events. For example, to register callback for event=0x1 and event=0x2 for
the given node, agent can provide event=0x3 (0x1 | 0x2). It is not possible
to register multiple events for different nodes in a single registration
call.
Also provide support to receive multiple error events as in single
notification from firmware and then forward it to subscribed drivers via
registered callback one by one.
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Link: https://lore.kernel.org/r/20211129070216.30253-2-abhyuday.godhasara@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently renesas_soc_init() scans the whole device tree up to three
times, to find a device node describing a product register.
Furthermore, the product register handling for the different variants is
very similar, with the major difference being the location of the
product bitfield inside the product register.
Reduce scanning to a single pass using of_find_matching_node_and_match()
instead. Switch to a common handling of product registers, by storing
the intrinsics of each product register type in the data field of the
corresponding match entry.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/057721f46c7499de4133135488f0f3da7fb39265.1636570669.git.geert+renesas@glider.be
Enable the vpu-h1 clock when the domain is active because reading
or writing to the VPU-H1 IP block cause the system to hang.
Fixes: 656ade7aa4 ("soc: imx: gpcv2: keep i.MX8M* bus clocks enabled")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In case the following power domain sequence happens, iMX8M Mini always hangs:
gpumix:on -> gpu:on -> gpu:off -> gpu:on
This is likely due to another quirk of the GPC block. This situation can be
prevented by always synchronously powering off both the domain and MIX domain.
Make it so. This turns the aforementioned sequence into:
gpumix:on -> gpu:on -> gpu:off -> gpumix:off -> gpumix:on -> gpu:on
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
QCM2290 has the same RPM power domains as SM6115. Add QCM2290
support by reusing SM6115 power domains.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211108134442.30051-4-shawn.guo@linaro.org
Add macros for the Node-Id of Error events.
Move supported api callback ids from zynqmp-power to zynqmp-firmware.
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Link: https://lore.kernel.org/r/20211026042525.26612-3-abhyuday.godhasara@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix following coccicheck warning:
./drivers/soc/bcm/brcmstb/pm/pm-mips.c:404:1-23: WARNING: Function
for_each_matching_node should have of_node_put() before goto or break
Early exits from for_each_matching_node should decrement the
node reference counter.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The Exynos ChipID driver, like most of the Exynos drivers, uses one
compatible for entire family of compatible devices using one devicetree
"compatible". The compatibility is here described by programming
interface (register layout), not by actual values, so the product ID
register on one family of devices has different values for different
SoCs.
Describe which SoC goes with which compatible for documentation
purposes, if the DTS is not available in mainline.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211031205212.59505-1-krzysztof.kozlowski@canonical.com
R-Car Gen3 SoC series has a realtime processor, the boot
address of this processor can be set thanks to CR7BAR register
of the reset module.
Export this function so that it's possible to set the boot
address from a remoteproc driver.
Also drop the __initdata qualifier on rcar_rst_base,
since we will use this address later than init time.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Link: https://lore.kernel.org/r/20211022122101.66998-1-julien.massot@iot.bzh
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Pull exit cleanups from Eric Biederman:
"While looking at some issues related to the exit path in the kernel I
found several instances where the code is not using the existing
abstractions properly.
This set of changes introduces force_fatal_sig a way of sending a
signal and not allowing it to be caught, and corrects the misuse of
the existing abstractions that I found.
A lot of the misuse of the existing abstractions are silly things such
as doing something after calling a no return function, rolling BUG by
hand, doing more work than necessary to terminate a kernel thread, or
calling do_exit(SIGKILL) instead of calling force_sig(SIGKILL).
In the review a deficiency in force_fatal_sig and force_sig_seccomp
where ptrace or sigaction could prevent the delivery of the signal was
found. I have added a change that adds SA_IMMUTABLE to change that
makes it impossible to interrupt the delivery of those signals, and
allows backporting to fix force_sig_seccomp
And Arnd found an issue where a function passed to kthread_run had the
wrong prototype, and after my cleanup was failing to build."
* 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits)
soc: ti: fix wkup_m3_rproc_boot_thread return type
signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed
signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV)
exit/r8188eu: Replace the macro thread_exit with a simple return 0
exit/rtl8712: Replace the macro thread_exit with a simple return 0
exit/rtl8723bs: Replace the macro thread_exit with a simple return 0
signal/x86: In emulate_vsyscall force a signal instead of calling do_exit
signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig
signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails
exit/syscall_user_dispatch: Send ordinary signals on failure
signal: Implement force_fatal_sig
exit/kthread: Have kernel threads return instead of calling do_exit
signal/s390: Use force_sigsegv in default_trap_handler
signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.
signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON
signal/sparc: In setup_tsb_params convert open coded BUG into BUG
signal/powerpc: On swapcontext failure force SIGSEGV
signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL)
signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT
signal/sparc32: Remove unreachable do_exit in do_sparc_fault
...
This is one set of fixes for the NXP/FSL DPAA2 drivers, addressing
a few minor issues. I received these just after sending out the
last v5.15 fixes, and nothing in here seemed urgent enough for
a quick follow-up.
-----BEGIN PGP SIGNATURE-----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=u3qO
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is one set of fixes for the NXP/FSL DPAA2 drivers, addressing a
few minor issues. I received these just after sending out the last
v5.15 fixes, and nothing in here seemed urgent enough for a quick
follow-up"
* tag 'arm-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: fsl: dpaa2-console: free buffer before returning from dpaa2_console_read
soc: fsl: dpio: use the combined functions to protect critical zone
soc: fsl: dpio: replace smp_processor_id with raw_smp_processor_id
The wkup_m3_rproc_boot_thread() function uses a nonstandard prototype,
which broke after Eric's recent cleanup:
drivers/soc/ti/wkup_m3_ipc.c: In function 'wkup_m3_rproc_boot_thread':
drivers/soc/ti/wkup_m3_ipc.c:429:16: error: 'return' with a value, in function returning void [-Werror=return-type]
429 | return 0;
| ^
drivers/soc/ti/wkup_m3_ipc.c:416:13: note: declared here
416 | static void wkup_m3_rproc_boot_thread(struct wkup_m3_ipc *m3_ipc)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Change it to the normal prototype as it should have been from the
start.
Fixes: 111e70490d ("exit/kthread: Have kernel threads return instead of calling do_exit")
Fixes: cdd5de500b ("soc: ti: Add wkup_m3_ipc driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20211105075119.2327190-1-arnd@kernel.org
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
These are all the driver updates for SoC specific drivers. There
are a couple of subsystems with individual maintainers picking up
their patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this
tree this time. There are only minor changes, but they depend
on other tegra driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process.
This depends on a small sound driver change that is included
here as well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains
a mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for
the "Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed
BMCs, something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better suspend/resume
support
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx, layerscape,
allwinner, broadcom, and omap.
-----BEGIN PGP SIGNATURE-----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=tUuj
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are all the driver updates for SoC specific drivers. There are a
couple of subsystems with individual maintainers picking up their
patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this tree this
time. There are only minor changes, but they depend on other tegra
driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process. This
depends on a small sound driver change that is included here as
well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains a
mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for the
"Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed BMCs,
something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better
suspend/resume support"
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
layerscape, allwinner, broadcom, and omap"
* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
optee: Fix spelling mistake "reclain" -> "reclaim"
Revert "firmware: qcom: scm: Add support for MC boot address API"
qcom: spm: allow compile-testing
firmware: arm_ffa: Remove unused 'compat_version' variable
soc: samsung: exynos-chipid: add exynosautov9 SoC support
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: aspeed: Add UART routing support
soc: fsl: dpio: rename the enqueue descriptor variable
soc: fsl: dpio: use an explicit NULL instead of 0
...
Lots of code development have been see in ASoC side as usual, while
the continued development on memalloc helper and USB-audio low-
latency support are found in the rest. Note that a few changes in the
unusual places like arch/sh are included, which are a part of ASoC DAI
format cleanups.
ALSA core:
- Continued memallloc helper updates and cleanups, now supporting
non-coherent and non-contiguous pages
- Fixes for races in mixer OSS layer
ASoC:
- A new version of the audio graph card which supports a wider range
of systems
- Several conversions to YAML DT bindings
- Continuing cleanups to the SOF and Intel code
- Move of the Cirrus DSP framework into drivers/firmware to allow for
future use by non-audio DSPs
- An overhaul of the cs42l42 driver, correcting many problems
- DAI format terminology conversions over many drivers for cleanups
- Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
RT5682S, and RT9120 and Rockchip RV1126 and RK3568
USB-audio:
- Continued improvements on low-latency playback
- Quirks for Pioneer devices, Line6 HX-Stomp XL, Audient iD14
HD-audio:
- Reduce excessive udelay() calls on Intel platforms; this should
reduce the CPU load with PulseAudio
- Quirks for HP and Clevo laptops
FireWire:
- Support for meter information on MOTU
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmGCYqkOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE9JDQ//bjjRIVH+JmvhNgLJgJdtdpidaplKUtimEsWk
8/bFJT0lqPjGMz43bALaj4UTvO2N39ZIW8FVmHDVGh54Xuw8Qu+M/NKiD3J2p4xO
Pc2rljsiJr7G2VfcBEyDb74wF4fdiFqe6N8PsIT2EG7GxhZiZ6i4+7sdpKoXqmgv
9ltUzPrtIQQva8c0ER+xHNG1sYVX0bh9vzRIA1aEosYmCPqMIatFBocqwT6fM4Ls
Ko3GK3GBOnlfVoN+O/ZOsR6Lv6XYApUyp2HqCSrnZK1KvVY4ptYP8XLVwPdEi3OX
5l0oilOvAch2KIj++K2yzk+xpoEQZ/MIO/1eehLN2ioWyayUNNbeHM0fl3dmdLUQ
Gow8DbA9o63auERTt6qJs6ed7KOmXewKT9IKiSK6f991JaD0n7nCbcw6yRx1OqWA
CafXVIVW1CsqTGJuMZzdzBvBZ2ex9OpdhpUw2v12vf2OXKQax9WsfJjVL+qmA0PC
zbb6viwRKLhAYzoPh/pdHOLm2cvRvdJZstnW8w5+52g96LEF9v4bale7aPi4bqdi
0o5l/0VGjiXjicT2tf/x8WhuExqPSA64L21adshZ0vmSrPmaGJb6IX4j4zd9TW5L
v3xUUyKRmq3j7fYN2fN2hGh2qGq+EcdcfNyWOj2XrJm+JFB50/Ac1hcYd5WIZKrh
xn1luaw=
=UBNY
-----END PGP SIGNATURE-----
Merge tag 'sound-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of code development have been see in ASoC side as usual, while
the continued development on memalloc helper and USB-audio low-
latency support are found in the rest.
Note that a few changes in the unusual places like arch/sh are
included, which are a part of ASoC DAI format cleanups.
ALSA core:
- Continued memalloc helper updates and cleanups, now supporting
non-coherent and non-contiguous pages
- Fixes for races in mixer OSS layer
ASoC:
- A new version of the audio graph card which supports a wider range
of systems
- Several conversions to YAML DT bindings
- Continuing cleanups to the SOF and Intel code
- Move of the Cirrus DSP framework into drivers/firmware to allow for
future use by non-audio DSPs
- An overhaul of the cs42l42 driver, correcting many problems
- DAI format terminology conversions over many drivers for cleanups
- Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
RT5682S, and RT9120 and Rockchip RV1126 and RK3568
USB-audio:
- Continued improvements on low-latency playback
- Quirks for Pioneer devices, Line6 HX-Stomp XL, Audient iD14
HD-audio:
- Reduce excessive udelay() calls on Intel platforms; this should
reduce the CPU load with PulseAudio
- Quirks for HP and Clevo laptops
FireWire:
- Support for meter information on MOTU"
* tag 'sound-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (513 commits)
ALSA: usb-audio: Add quirk for Audient iD14
ALSA: hda/realtek: Add quirk for Clevo PC70HS
ALSA: usb-audio: Line6 HX-Stomp XL USB_ID for 48k-fixed quirk
ALSA: usb-audio: Add registration quirk for JBL Quantum 400
ASoC: rsnd: Fix an error handling path in 'rsnd_node_count()'
ASoC: tlv320aic3x: Make aic3x_remove() return void
ASoC: Intel: soc-acpi: use const for all uses of snd_soc_acpi_codecs
ASoC: Intel: soc-acpi-cht: shrink tables using compatible IDs
ASoC: Intel: soc-acpi-byt: shrink tables using compatible IDs
ASoC: Intel: sof_rt5682: use comp_ids to enumerate rt5682s
ASoC: Intel: sof_rt5682: detect codec variant in probe function
ASoC: soc-acpi: add comp_ids field for machine driver matching
ASoC: mediatek: mt8195: add mt8195-mt6359-rt1011-rt5682 bindings document
ASoC: mediatek: mt8195: add machine driver with mt6359, rt1011 and rt5682
ASoC: Stop dummy from overriding hwparams
ASoC: topology: Change topology device to card device
ASoC: topology: Use correct device for prints
ASoC: topology: Check for dapm widget completeness
ASoC: topology: Add header payload_size verification
ASoC: core: Remove invalid snd_soc_component_set_jack call
...
In 2009 Oleg reworked[1] the kernel threads so that it is not
necessary to call do_exit if you are not using kthread_stop(). Remove
the explicit calls of do_exit and complete_and_exit (with a NULL
completion) that were previously necessary.
[1] 63706172f3 ("kthreads: rework kthread_stop()")
Link: https://lkml.kernel.org/r/20211020174406.17889-12-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
ARM_QCOM_SPM_CPUIDLE can be selected when compile-testing on
other architectures, but this causes a Kconfig warning
for QCOM_SPM:
WARNING: unmet direct dependencies detected for QCOM_SPM
Depends on [n]: ARCH_QCOM [=n]
Selected by [y]:
- ARM_QCOM_SPM_CPUIDLE [=y] && CPU_IDLE [=y] && (ARM [=y] || ARM64) && (ARCH_QCOM [=n] || COMPILE_TEST [=y]) && !ARM64 && MMU [=y]
Make it possible to also compile-test this one, which can
be done now that v5.15-rc5 lets you select QCOM_SCM everywhere.
Fixes: a871be6b8e ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver")
Fixes: 498ba2a8a2 ("cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This introduces the Qualcomm "sleep stats" driver, which aids the
efforts of bringing various Qualcomm platforms into low power mode.
The SMP2P driver gains support for negotiating the "SSR" feature, which
is used to better synchronize some corner cases that might appear as the
remoteproc is recovering from a crash.
The socinfo driver learns about a few new PMICs.
SMEM is updated so that it's possible to put the compatible property
directly in the reserved-memory node, to avoid having to have a separate
node just pointing to the memory-region.
Lastly it fixes some bugs in smp2p, apr, rpmhpd drivers, notably
avoiding the issue where powering on a power-domain using rpmhpd while
keeping the performance_state at 0 is a nop
-----BEGIN PGP SIGNATURE-----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=NTMF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=HxRd
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
More Qualcomm driver updates for v5.16
This introduces the Qualcomm "sleep stats" driver, which aids the
efforts of bringing various Qualcomm platforms into low power mode.
The SMP2P driver gains support for negotiating the "SSR" feature, which
is used to better synchronize some corner cases that might appear as the
remoteproc is recovering from a crash.
The socinfo driver learns about a few new PMICs.
SMEM is updated so that it's possible to put the compatible property
directly in the reserved-memory node, to avoid having to have a separate
node just pointing to the memory-region.
Lastly it fixes some bugs in smp2p, apr, rpmhpd drivers, notably
avoiding the issue where powering on a power-domain using rpmhpd while
keeping the performance_state at 0 is a nop
* tag 'qcom-drivers-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: qcom: smp2p: add feature negotiation and ssr ack feature support
soc: qcom: Add Sleep stats driver
dt-bindings: Introduce QCOM Sleep stats bindings
soc: qcom: socinfo: add two missing PMIC IDs
soc: qcom: rpmhpd: Make power_on actually enable the domain
soc: qcom: smem: Support reserved-memory description
dt-bindings: soc: smem: Make indirection optional
dt-bindings: sram: Document qcom,rpm-msg-ram
Link: https://lore.kernel.org/r/20211026140706.1205989-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Convert Exynos ChipID and ASV driver to a module and make it a
default, instead of selected. The driver is not essential, so it
could be disabled, if needed.
2. Add support for Exynos850 and Exynos Auto v9 to Exynos ChipID and ASV
driver.
3. Get rid of HAVE_S3C_RTC because it was adding just another layer
instead of direct dependencies.
4. Minor cleanups.
-----BEGIN PGP SIGNATURE-----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=ZJb8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=y2Ab
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/drivers
Samsung SoC drivers changes for v5.16
1. Convert Exynos ChipID and ASV driver to a module and make it a
default, instead of selected. The driver is not essential, so it
could be disabled, if needed.
2. Add support for Exynos850 and Exynos Auto v9 to Exynos ChipID and ASV
driver.
3. Get rid of HAVE_S3C_RTC because it was adding just another layer
instead of direct dependencies.
4. Minor cleanups.
* tag 'samsung-drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: exynos-chipid: add exynosautov9 SoC support
rtc: s3c: remove HAVE_S3C_RTC in favor of direct dependencies
soc: samsung: exynos-chipid: Add Exynos850 support
dt-bindings: samsung: exynos-chipid: Document Exynos850 compatible
soc: samsung: exynos-chipid: Pass revision reg offsets
soc: samsung: pm_domains: drop unused is_off field
arm64: exynos: don't have ARCH_EXYNOS select EXYNOS_CHIPID
soc: samsung: exynos-chipid: do not enforce built-in
soc: samsung: exynos-chipid: convert to a module
soc: samsung: exynos-chipid: avoid soc_device_to_device()
soc: samsung: exynos-pmu: Fix compilation when nothing selects CONFIG_MFD_CORE
Link: https://lore.kernel.org/r/20211026094709.75692-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This immutable branch is based on v5.15-rc1 and contains the following
patches extending the existig APR driver to also implement GPR:
20210927135559.738-2-srinivas.kandagatla@linaro.org20210927135559.738-3-srinivas.kandagatla@linaro.org20210927135559.738-4-srinivas.kandagatla@linaro.org20210927135559.738-5-srinivas.kandagatla@linaro.org20210927135559.738-6-srinivas.kandagatla@linaro.org
-----BEGIN PGP SIGNATURE-----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=r7vf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmF3+W4ACgkQJNaLcl1U
h9C+DQf7Bxzz7xjGv5AFyZ8eZbAx0LnTBp9SytON2gh5mxWGUCI0kxSdnEd/ot9u
PUhWMf7192kQw4qmkZArdtKiaxhZdKZvXZ0kTfyoTvcR4o9fdgWtMUla5QhBVzAu
UgZbTH91wDt4P68cYzLrhG8gFlagzSwRT8WF4imJmcJsehPq22Nz70tK5tSePZko
KcbnpkqYV19CQRJsEKXBivAptpE/oAQJBSoYVw/gkizqrznNGI2cqWBl+krGOdBW
zI+CZbzuAwTi9xNu3tmlcgPDGxOHYFVU7aIy2w/ENNRsAbWgFThcO25pWBKROtKc
45uC5fj24R6cCCyuygwFJuLoeRy31Q==
=ts3p
-----END PGP SIGNATURE-----
Merge tag '20210927135559.738-6-srinivas.kandagatla@linaro.org' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into v11_20211026_srinivas_kandagatla_asoc_qcom_add_audioreach_support for audioreach support
v5.15-rc1 + 20210927135559.738-[23456]-srinivas.kandagatla@linaro.org
This immutable branch is based on v5.15-rc1 and contains the following
patches extending the existig APR driver to also implement GPR:
20210927135559.738-2-srinivas.kandagatla@linaro.org20210927135559.738-3-srinivas.kandagatla@linaro.org20210927135559.738-4-srinivas.kandagatla@linaro.org20210927135559.738-5-srinivas.kandagatla@linaro.org20210927135559.738-6-srinivas.kandagatla@linaro.org
The product id of Exynos Auto v9 is "0xAAA8_0000". Add this id and its
name.
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20211021012017.158919-2-chanho61.park@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Fix following coccicheck warning:
./drivers/soc/qcom/smp2p.c:501:1-33: WARNING: Function
for_each_available_child_of_node should have of_node_put() before goto
Early exits from for_each_available_child_of_node should decrement the
node reference counter.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211014062350.8942-1-wanjiabing@vivo.com
Fix following coccicheck warning:
./drivers/soc/qcom/apr.c:485:1-23: WARNING: Function
for_each_child_of_node should have of_node_put() before return
Early exits from for_each_child_of_node should decrement the
node reference counter.
Fixes: 8347356626 ("soc: qcom: apr: Add avs/audio tracking functionality")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211014083017.19714-1-wanjiabing@vivo.com
Add driver support for the UART routing control. Users can perform
runtime configuration of the RX muxes among the UART controllers and
the UART IO pins.
The sysfs interface is also exported for the convenience of routing paths
check and update.
Signed-off-by: Oskar Senft <osk@google.com>
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Tested-by: Lei YU <yulei.sh@bytedance.com>
Link: https://lore.kernel.org/r/20210927023053.6728-5-chiawei_wang@aspeedtech.com
Link: https://lore.kernel.org/r/20211022000616.481772-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
DPIO Driver
- Code cleanup and fix compile warning
RCMP and Guts Driver
- Make use of the helper function devm_platform_ioremap_resource()
-----BEGIN PGP SIGNATURE-----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=SEAL
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=1cl/
-----END PGP SIGNATURE-----
Merge tag 'soc-fsl-next-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers
NXP/FSL SoC driver updates for v5.16
DPIO Driver
- Code cleanup and fix compile warning
RCMP and Guts Driver
- Make use of the helper function devm_platform_ioremap_resource()
* tag 'soc-fsl-next-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: dpio: rename the enqueue descriptor variable
soc: fsl: dpio: use an explicit NULL instead of 0
soc: fsl: rcpm: Make use of the helper function devm_platform_ioremap_resource()
soc: fsl: guts: Make use of the helper function devm_platform_ioremap_resource()
Link: https://lore.kernel.org/r/20211022010027.11866-2-leoyang.li@nxp.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The struct qbman_eq_desc 'd' variable declaration is covering one of the
function parameters. This has no functional impact since this function
parameter was not used after the new declaration.
Even so, rename the variable so that we make the code more readable.
Fixes: 3b2abda7d2 ("soc: fsl: dpio: Replace QMAN array mode with ring mode enqueue")
Signed-off-by: Youri Querry <youri.querry_1@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Use an explicit NULL pointer when calling qbman_swp_enqueue_multiple()
instead of a plain integer. Without this fix, we get the following
compile time error.
drivers/soc/fsl/dpio/dpio-service.c:466:60: warning: Using plain integer as NULL pointer
Fixes: 9d98809711 ("soc: fsl: dpio: Adding QMAN multiple enqueue interface")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Free the kbuf buffer before returning from the dpaa2_console_read()
function. The variable no longer goes out of scope, leaking the storage
it points to.
Fixes: c93349d8c1 ("soc: fsl: add DPAA2 console support")
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
and improving logging.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYW0p4gAKCRDj7w1vZxhR
xQmwAPsFDSF9fDz1/75sF2FosGV2dPIOBCMUeNFbMesvBKlZMQD/WVAyu7jjiL7k
i3LThqHE8Jsefv0gqvu2nXaHfxuGmAo=
=yWZX
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=jasz
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drivers-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/drivers
Some new drivers changes for the Allwinner SoCs, converting to a helper
and improving logging.
* tag 'sunxi-drivers-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
bus: sun50i-de2: Adjust printing error message
soc: sunxi_sram: Make use of the helper function devm_platform_ioremap_resource()
Link: https://lore.kernel.org/r/ad0aa469-9e1b-4bb6-a116-92648ed774fa.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Select REGMAP_MMIO for i.MX GPCv2 driver to avoid build issue.
- A couple of i.MX GPCv2 driver changes from Marek Vasut to turn
domain->pgc into bitfield for i.MX8MM GPU domain support.
- A series from Lucas Stach adding support of i.MX8MM nested power
domains like VPUMIX and DISPMIX which contains the ADB and BLK_CTRL.
- An off-by-one fix on Lucas' i.MX8M blk-ctrl driver code.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmFqh8YUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6v0wf/cc+xouEGoKRrAvj3QNB/2pxnDSbk
EmObg5/JG5s7+elWGXVxTQ21OFoiapQvj1MDHh1uv2sqX/EOMql45kbvjqOResht
4mEe1sB9Nr1xe5FmBK2XS6MhSjmYGTBrsNvLY4ctSITzb1FFE3QCmzIO5/TBrBgi
8oD9Uj8rauagxtcyG6/qXKCO5sBdfQ6BeEe22DKB0rstPkQOga2Ks8lsHeP6igvi
wuYUOEaQ6wBZfVaFm/l0KqjapmILyspM4FGW1q0vQ4cW8VcOTDK4tz8UpmXYQaaP
ovQIfnF7Nvk7acs62wT7Vd5t7UOQOfvT6YY2pSKQqotv1M1ip3jT9tPKyQ==
=MHbD
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=A9t6
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.16:
- Select REGMAP_MMIO for i.MX GPCv2 driver to avoid build issue.
- A couple of i.MX GPCv2 driver changes from Marek Vasut to turn
domain->pgc into bitfield for i.MX8MM GPU domain support.
- A series from Lucas Stach adding support of i.MX8MM nested power
domains like VPUMIX and DISPMIX which contains the ADB and BLK_CTRL.
- An off-by-one fix on Lucas' i.MX8M blk-ctrl driver code.
* tag 'imx-drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: imx8m-blk-ctrl: off by one in imx8m_blk_ctrl_xlate()
soc: imx: imx8m-blk-ctrl: add DISP blk-ctrl
soc: imx: add i.MX8M blk-ctrl driver
soc: imx: gpcv2: support system suspend/resume
soc: imx: gpcv2: keep i.MX8M* bus clocks enabled
soc: imx: gpcv2: add domain option to keep domain clocks enabled
soc: imx: gpcv2: add lockdep annotation
Revert "soc: imx: gpcv2: move reset assert after requesting domain power up"
soc: imx: gpcv2: allow to disable individual power domains
imx: soc: Select REGMAP_MMIO
soc: imx: gpcv2: Set both GPC_PGC_nCTRL(GPU_2D|GPU_3D) for MX8MM GPU domain
soc: imx: gpcv2: Turn domain->pgc into bitfield
Link: https://lore.kernel.org/r/20211016140138.1603-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Coverity complains of unsigned compare against 0. There are 2 cases in
this function:
1821 itp = (irq_holdoff * 1000) / p->desc->qman_256_cycles_per_ns;
CID 121131 (#1 of 1): Unsigned compared against 0 (NO_EFFECT)
unsigned_compare: This less-than-zero comparison of an unsigned value is never true. itp < 0U.
1822 if (itp < 0 || itp > 4096) {
1823 max_holdoff = (p->desc->qman_256_cycles_per_ns * 4096) / 1000;
1824 pr_err("irq_holdoff must be between 0..%dus\n", max_holdoff);
1825 return -EINVAL;
1826 }
1827
unsigned_compare: This less-than-zero comparison of an unsigned value is never true. irq_threshold < 0U.
1828 if (irq_threshold >= p->dqrr.dqrr_size || irq_threshold < 0) {
1829 pr_err("irq_threshold must be between 0..%d\n",
1830 p->dqrr.dqrr_size - 1);
1831 return -EINVAL;
1832 }
Fix this by removing the comparisons altogether as they are incorrect. Zero is
a possible value in either case. Also fix a minor comment typo and update the
2 pr_err() calls to use %u formatting as well as be more precise regarding
the exact error.
Fixes: ed1d2143fe ("soc: fsl: dpio: add support for irq coalescing per software portal")
Cc: Ioana Ciornei <ioana.ciornei@nxp.com>
Cc: Roy Pledge <Roy.Pledge@nxp.com>
Cc: Li Yang <leoyang.li@nxp.com>
Cc: linux-kernel@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: netdev@vger.kernel.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In orininal code, use 2 function spin_lock() and local_irq_save() to
protect the critical zone. But when enable the kernel debug config,
there are below inconsistent lock state detected.
================================
WARNING: inconsistent lock state
5.10.63-yocto-standard #1 Not tainted
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
lock_torture_wr/226 [HC0[0]:SC1[5]:HE1:SE0] takes:
ffff002005b2dd80 (&p->access_spinlock){+.?.}-{3:3}, at: qbman_swp_enqueue_multiple_mem_back+0x44/0x270
{SOFTIRQ-ON-W} state was registered at:
lock_acquire.part.0+0xf8/0x250
lock_acquire+0x68/0x84
_raw_spin_lock+0x68/0x90
qbman_swp_enqueue_multiple_mem_back+0x44/0x270
......
cryptomgr_test+0x38/0x60
kthread+0x158/0x164
ret_from_fork+0x10/0x38
irq event stamp: 4498
hardirqs last enabled at (4498): [<ffff800010fcf980>] _raw_spin_unlock_irqrestore+0x90/0xb0
hardirqs last disabled at (4497): [<ffff800010fcffc4>] _raw_spin_lock_irqsave+0xd4/0xe0
softirqs last enabled at (4458): [<ffff8000100108c4>] __do_softirq+0x674/0x724
softirqs last disabled at (4465): [<ffff80001005b2a4>] __irq_exit_rcu+0x190/0x19c
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&p->access_spinlock);
<Interrupt>
lock(&p->access_spinlock);
*** DEADLOCK ***
So, in order to avoid deadlock, use the combined functions
spin_lock_irqsave/spin_unlock_irqrestore() to protect critical zone.
Fixes: 3b2abda7d2 ("soc: fsl: dpio: Replace QMAN array mode with ring mode enqueue")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
When enable debug kernel configs,there will be calltrace as below:
BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
caller is debug_smp_processor_id+0x20/0x30
CPU: 6 PID: 1 Comm: swapper/0 Not tainted 5.10.63-yocto-standard #1
Hardware name: NXP Layerscape LX2160ARDB (DT)
Call trace:
dump_backtrace+0x0/0x1a0
show_stack+0x24/0x30
dump_stack+0xf0/0x13c
check_preemption_disabled+0x100/0x110
debug_smp_processor_id+0x20/0x30
dpaa2_io_query_fq_count+0xdc/0x154
dpaa2_eth_stop+0x144/0x314
__dev_close_many+0xdc/0x160
__dev_change_flags+0xe8/0x220
dev_change_flags+0x30/0x70
ic_close_devs+0x50/0x78
ip_auto_config+0xed0/0xf10
do_one_initcall+0xac/0x460
kernel_init_freeable+0x30c/0x378
kernel_init+0x20/0x128
ret_from_fork+0x10/0x38
Based on comment in the context, it doesn't matter whether
preemption is disable or not. So, replace smp_processor_id()
with raw_smp_processor_id() to avoid above call trace.
Fixes: c89105c9b3 ("staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Here are some small driver core fixes for 5.15-rc6, all of which have
been in linux-next for a while with no reported issues.
They include:
- kernfs negative dentry bugfix
- simple pm bus fixes to resolve reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYWvzFg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymfLQCfSCP698AAvoCgG0fOfLakFkw80h0AoKIVm3lk
t0GUdnplU18CjnO5M1Zj
=+dh9
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for 5.15-rc6, all of which have
been in linux-next for a while with no reported issues.
They include:
- kernfs negative dentry bugfix
- simple pm bus fixes to resolve reported issues"
* tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: bus: Delete CONFIG_SIMPLE_PM_BUS
drivers: bus: simple-pm-bus: Add support for probing simple bus only devices
driver core: Reject pointless SYNC_STATE_ONLY device links
kernfs: don't create a negative dentry if inactive node exists
This patch adds feature negotiation and ssr ack feature between
local host and remote processor. Local host can negotiate on common
features supported with remote processor.
When ssr ack feature bit is set, the remote processor will tell local
host when it is reinitialized. All clients registered for falling edge
interrupts will be notified when the smp2p entries are cleared for ssr.
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1633450403-21281-1-git-send-email-deesin@codeaurora.org
Let's add a driver to read the stats from remote processor and
export to debugfs.
The driver creates "qcom_sleep_stats" directory in debugfs and
adds files for various low power mode available. Below is sample
output with command
cat /sys/kernel/debug/qcom_sleep_stats/ddr
count = 0
Last Entered At = 0
Last Exited At = 0
Accumulated Duration = 0
Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
[mkshah: add subsystem sleep stats, create one file for each stat]
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1634107104-22197-3-git-send-email-mkshah@codeaurora.org
Add IDs for PMK8001 and PMI8996. They also fall in the list of
'duplicated' IDs, where the same index was used for multiple chips.
Fixes: 7fda2b0bfb ("soc: qcom: socinfo: import PMIC IDs from pmic-spmi")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211016190607.49866-1-dmitry.baryshkov@linaro.org
The general expectation is that powering on a power-domain should make
the power domain deliver some power, and if a specific performance state
is needed further requests has to be made.
But in contrast with other power-domain implementations (e.g. rpmpd) the
RPMh does not have an interface to enable the power, so the driver has
to vote for a particular corner (performance level) in rpmh_power_on().
But the corner is never initialized, so a typical request to simply
enable the power domain would not actually turn on the hardware. Further
more, when no more clients vote for a performance state (i.e. the
aggregated vote is 0) the power domain would be turned off.
Fix both of these issues by always voting for a corner with non-zero
value, when the power domain is enabled.
The tracking of the lowest non-zero corner is performed to handle the
corner case if there's ever a domain with a non-zero lowest corner, in
which case both rpmh_power_on() and rpmh_rpmhpd_set_performance_state()
would be allowed to use this lowest corner.
Fixes: 279b7e8a62 ("soc: qcom: rpmhpd: Add RPMh power domain driver")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211005033732.2284447-1-bjorn.andersson@linaro.org
Use the generic dynamic interrupt moderation (dim) framework to
implement adaptive interrupt coalescing on Rx. With the per-packet
interrupt scheme, a high interrupt rate has been noted for moderate
traffic flows leading to high CPU utilization.
The dpio driver exports new functions to enable/disable adaptive IRQ
coalescing on a DPIO object, to query the state or to update Net DIM
with a new set of bytes and frames dequeued.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In DPAA2 based SoCs, the IRQ coalesing support per software portal has 2
configurable parameters:
- the IRQ timeout period (QBMAN_CINH_SWP_ITPR): how many 256 QBMAN
cycles need to pass until a dequeue interrupt is asserted.
- the IRQ threshold (QBMAN_CINH_SWP_DQRR_ITR): how many dequeue
responses in the DQRR ring would generate an IRQ.
Add support for setting up and querying these IRQ coalescing related
parameters.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Through the dpio_get_attributes() firmware call the dpio driver has
access to the QBMAN clock frequency. Extend the structure which holds
the firmware's response so that we can have access to this information.
This will be needed in the next patches which also add support for
interrupt coalescing which needs to be configured based on the
frequency.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add chip-id support for Exynos850 SoC. Despite its "E3830" ID, the
actual SoC name is Exynos850 (Exynos3830 name is internal and outdated).
Format of Product_ID register in Exynos850 (offset 0x0):
[31:0] Product ID (identification)
Format of CHIPID_REV register in Exynos850 (offset 0x10):
[23:20] Main revision
[19:16] Sub revision
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211014133508.1210-3-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Old Exynos SoCs have both Product ID and Revision ID in one single
register, while new SoCs tend to have two separate registers for those
IDs. Implement handling of both cases by passing Revision ID register
offsets in driver data.
Previously existing macros for Exynos4210 (removed in this patch) were
incorrect:
#define EXYNOS_SUBREV_MASK (0xf << 4)
#define EXYNOS_MAINREV_MASK (0xf << 0)
Actual format of PRO_ID register in Exynos4210 (offset 0x0):
[31:12] Product ID
[9:8] Package information
[7:4] Main Revision Number
[3:0] Sub Revision Number
This patch doesn't change the behavior on existing platforms, so
'/sys/devices/soc0/revision' will show the same string as before.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Henrik Grimler <henrik@grimler.se>
Link: https://lore.kernel.org/r/20211014133508.1210-1-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The > comparison should be >= to prevent reading one element beyond the
end of the array. The onecell_data->domains[] array is allocated in
imx8m_blk_ctrl_probe() and it has "onecell_data->num_domains" elements.
Fixes: 5b340e7813d4 ("soc: imx: add i.MX8M blk-ctrl driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Practically all modern Qualcomm platforms has a single reserved-memory
region for SMEM. So rather than having to describe SMEM in the form of a
node with a reference to a reserved-memory node, allow the SMEM device
to be instantiated directly from the reserved-memory node.
The current means of falling back to dereferencing the "memory-region"
is kept as a fallback, if it's determined that the SMEM node is a
reserved-memory node.
The "qcom,smem" compatible is added to the reserved_mem_matches list, to
allow the reserved-memory device to be probed.
In order to retain the readability of the code, the resolution of
resources is split from the actual ioremapping.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20210930182111.57353-4-bjorn.andersson@linaro.org
5.16, please pull the following:
- Cai updates the bcm-pmb and bcm63xx-power drivers to use the
devm_platform_ioremap_resource() helper
- Florian updates the Bus Interface Unit code to tune the 72116 and
72113 chips according to their existing counterparts. The GISB driver is
updated to be built as a non-removable module
-----BEGIN PGP SIGNATURE-----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=9x6r
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Is9X
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.16/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom ARM/ARM64 SoC drivers changes for
5.16, please pull the following:
- Cai updates the bcm-pmb and bcm63xx-power drivers to use the
devm_platform_ioremap_resource() helper
- Florian updates the Bus Interface Unit code to tune the 72116 and
72113 chips according to their existing counterparts. The GISB driver is
updated to be built as a non-removable module
* tag 'arm-soc/for-5.16/drivers' of https://github.com/Broadcom/stblinux:
bus: brcmstb_gisb: Allow building as module
soc: bcm: brcmstb: biuctrl: Tune MCP settings for 72116
soc: bcm: brcmstb: biuctrl: Tune MCP settings for 72113
soc: bcm63xx-power: Make use of the helper function devm_platform_ioremap_resource()
soc: bcm: bcm-pmb: Make use of the helper function devm_platform_ioremap_resource()
Link: https://lore.kernel.org/r/20211013174016.831348-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This drops the use of power-domains for exposing the load_state from the
QMP driver to clients, to avoid issues related to system suspend.
SMP2P becomes wakeup capable, to allow dying remoteprocs to wake up
Linux from suspend to perform recovery.
It adds RPM power-domain support for SM6350 and MSM8953 and base RPM
support for MSM8953 and QCM2290.
It adds support for MSM8996, SDM630 and SDM660 in the SPM driver, which
will enable the introduction of proper voltage scaling of the CPU
subsystem.
Support for releasing secondary CPUs on MSM8226 is introduced.
The Asynchronous Packet Router (APR) driver is extended to support the
new Generic Packet Router (GPR) variant, which is used to communicate
with the firmware in the new AudioReach audio driver.
Lastly it transitions a number of drivers to safer string functions, as
well as switching things to use devm_platform_ioremap_resource().
-----BEGIN PGP SIGNATURE-----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=FE4j
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=LLU7
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.16
This drops the use of power-domains for exposing the load_state from the
QMP driver to clients, to avoid issues related to system suspend.
SMP2P becomes wakeup capable, to allow dying remoteprocs to wake up
Linux from suspend to perform recovery.
It adds RPM power-domain support for SM6350 and MSM8953 and base RPM
support for MSM8953 and QCM2290.
It adds support for MSM8996, SDM630 and SDM660 in the SPM driver, which
will enable the introduction of proper voltage scaling of the CPU
subsystem.
Support for releasing secondary CPUs on MSM8226 is introduced.
The Asynchronous Packet Router (APR) driver is extended to support the
new Generic Packet Router (GPR) variant, which is used to communicate
with the firmware in the new AudioReach audio driver.
Lastly it transitions a number of drivers to safer string functions, as
well as switching things to use devm_platform_ioremap_resource().
* tag 'qcom-drivers-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (40 commits)
soc: qcom: apr: Add GPR support
soc: dt-bindings: qcom: add gpr bindings
soc: qcom: apr: make code more reuseable
soc: dt-bindings: qcom: apr: deprecate qcom,apr-domain property
soc: dt-bindings: qcom: apr: convert to yaml
dt-bindings: soc: qcom: aoss: Delete unused power-domain definitions
dt-bindings: msm/dp: Remove aoss-qmp header
soc: qcom: aoss: Drop power domain support
dt-bindings: soc: qcom: aoss: Drop the load state power-domain
soc: qcom: smp2p: Add wakeup capability to SMP2P IRQ
dt-bindings: power: rpmpd: Add SM6350 to rpmpd binding
dt-bindings: soc: qcom: aoss: Add SM6350 compatible
soc: qcom: llcc: Disable MMUHWT retention
soc: qcom: smd-rpm: Add QCM2290 compatible
dt-bindings: soc: qcom: smd-rpm: Add QCM2290 compatible
firmware: qcom_scm: Add compatible for MSM8953 SoC
dt-bindings: firmware: qcom-scm: Document msm8953 bindings
soc: qcom: pdr: Prefer strscpy over strcpy
soc: qcom: rpmh-rsc: Make use of the helper function devm_platform_ioremap_resource_byname()
soc: qcom: gsbi: Make use of the helper function devm_platform_ioremap_resource()
...
Link: https://lore.kernel.org/r/20211012173442.1017010-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This set consists of stub additions to enable compile testing for more
drivers, exposes the PMC's USB regmap on all SoC generations, removes a
state synchronization workaround that is no longer needed and adds an
error reporting driver that can help troubleshoot crashes.
To top it all off, an error handling path in the powergating code is
fixed and the devm_platform_ioremap_resource() function is used to
remove some boilerplate code.
-----BEGIN PGP SIGNATURE-----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=79h+
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=DXSR
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.16-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
soc/tegra: Changes for v5.16-rc1
This set consists of stub additions to enable compile testing for more
drivers, exposes the PMC's USB regmap on all SoC generations, removes a
state synchronization workaround that is no longer needed and adds an
error reporting driver that can help troubleshoot crashes.
To top it all off, an error handling path in the powergating code is
fixed and the devm_platform_ioremap_resource() function is used to
remove some boilerplate code.
* tag 'tegra-for-5.16-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Use devm_platform_ioremap_resource()
soc/tegra: Add Tegra186 ARI driver
soc/tegra: Fix an error handling path in tegra_powergate_power_up()
soc/tegra: pmc: Expose USB regmap to all SoCs
soc/tegra: pmc: Disable PMC state syncing
soc/tegra: pm: Make stubs usable for compile testing
soc/tegra: irq: Add stubs needed for compile testing
soc/tegra: fuse: Add stubs needed for compile testing
Link: https://lore.kernel.org/r/20211008201132.1678814-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- soc: amlogic: meson-gx-socinfo: Add the SOC ID for the S905Y2 used in the Radxa Zero
- soc: amlogic: meson-clk-measure/canvas: Make use of devm_platform_ioremap_resource()
-----BEGIN PGP SIGNATURE-----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=hK3p
-----END PGP SIGNATURE-----
Merge tag 'amlogic-drivers-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/drivers
Amlogic Drivers updates for v5.16:
Minor cleanups, and the addition of the S905Y2 SoC ID
* tag 'amlogic-drivers-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
soc: amlogic: meson-clk-measure: Make use of the helper function devm_platform_ioremap_resource()
soc: amlogic: canvas: Make use of the helper function devm_platform_ioremap_resource()
soc: amlogic: meson-gx-socinfo: Add S905Y2 ID for Radxa Zero
Link: https://lore.kernel.org/r/f8e020d3-29f7-0745-3864-01975edd20f7@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use the devm_platform_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a driver to hook into panic notifiers and print machine check
status for debugging. Status information is retrieved via SMC. This
is supported by upstream ARM Trusted Firmware.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Among other features the mmsys driver should implement a reset
controller to be able to reset different bits from their space.
Cc: Jitao Shi <jitao.shi@mediatek.com>
Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20210930103105.v4.6.I15e2419141a69b2e5c7e700c34d92a69df47e04d@changeid
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add mtk mutex support for MT8192 SoC.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://lore.kernel.org/r/20210930155222.5861-5-yongqiang.niu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Few regression fixes for omaps for the v5.15-rc cycle. There is a fix
for boot time hangs that can happen on some am335x devices that started
when the pruss devicetree nodes were added. The other fixes are less
critical:
- Fix compiler warning for sysc_init_soc() that got recently introduced
- Fix external abort for am335x pruss as otherwise some am335x will hang
- Use CLKDM_NOAUTO quirk also for dra7 dcan1
- Fix older NAND device node regression for omap3-sdp
-----BEGIN PGP SIGNATURE-----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=2z/N
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=fI0x
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.15/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.15
Few regression fixes for omaps for the v5.15-rc cycle. There is a fix
for boot time hangs that can happen on some am335x devices that started
when the pruss devicetree nodes were added. The other fixes are less
critical:
- Fix compiler warning for sysc_init_soc() that got recently introduced
- Fix external abort for am335x pruss as otherwise some am335x will hang
- Use CLKDM_NOAUTO quirk also for dra7 dcan1
- Fix older NAND device node regression for omap3-sdp
* tag 'omap-for-v5.15/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap3430-sdp: Fix NAND device node
bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893
soc: ti: omap-prm: Fix external abort for am335x pruss
bus: ti-sysc: Add break in switch statement in sysc_init_soc()
Link: https://lore.kernel.org/r/pull-1633609552-789682@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
If an error occurs after a successful tegra_powergate_enable_clocks()
call, it must be undone by a tegra_powergate_disable_clocks() call, as
already done in the below and above error handling paths of this function.
Update the 'goto' to branch at the correct place of the error handling
path.
Fixes: a38045121b ("soc/tegra: pmc: Add generic PM domain support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This adds the description for the i.MX8MM disp blk-ctrl.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds a driver for the blk-ctrl blocks found in the i.MX8M* line of
SoCs. The blk-ctrl is a top-level peripheral located in the various *MIX
power domains and interacts with the GPC power controller to provide the
peripherals in the power domain access to the NoC and ensures that those
peripherals are properly reset when their respective power domain is
brought back to life.
Software needs to do different things to make the bus handshake happen
after the GPC *MIX domain is powered up and before it is powered down.
As the requirements are quite different between the various blk-ctrls
there is a callback function provided to hook in the proper sequence.
The peripheral domains are quite uniform, they handle the soft clock
enables and resets in the blk-ctrl address space and sequencing with the
upstream GPC power domains.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Our usage of runtime PM to control the hierarchy of power domains is
slightly unusual and means that powering up a domain may fail in early
system resume, as runtime PM is still disallowed at this stage.
However the system suspend/resume path takes care of powering down/up
the power domains in the order defined by the device parent/child and
power-domain provider/consumer hierarachy. So we can just runtime
resume all our power-domain devices to allow the power-up to work
properly in the resume path. System suspend will still disable all
domains as intended.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Annotate the domains with bus clocks to keep those clocks enabled
as long as the domain is active.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some of the MIX domains are using clocks to drive the bus bridges. Those
must be enabled at all times, as long as the domain is powered up and
they don't have any other consumer than the power domain. Add an option
to keep the clocks attached to a domain enabled as long as the domain
is power up and only disable them after the domain is powered down.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some of the GPCv2 power domains are nested inside each other without
visibility to lockdep at the genpd level, as they are in separate
driver instances and don't have a parent/child power-domain relationship.
Add a subclass annotation to the nested domains to let lockdep know that
it is okay to take the genpd lock in a nested fashion.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The simple-pm-bus driver is mandatory for CONFIG_OF based platforms to work
with fw_devlink. So, always compile it in for CONFIG_OF and delete the
config since it's no longer necessary.
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210929000735.585237-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit a77ebdd9f553. It turns out that the VPU domain has no
different requirements, even though the downstream ATF implementation seems
to suggest otherwise. Powering on the domain with the reset asserted works
fine. As the changed sequence has caused sporadic issues with the GPU
domains, just revert the change to go back to the working sequence.
Cc: <stable@vger.kernel.org> # 5.14
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some board designs don't supply power to all of the power domains,
as they are not used anyways. In that case we must make sure to
not touch those power domains at all, as trying to power up a
domain that has no power supplied to it will obviously end in a
system crash. Allow to disable those domains via the standard DT
status property.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-By: Tim Harvey <tharvey@gateworks.com>
Tested-By: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
All Tegra SoCs prior to Tegra186 have USB power controls within the Power
Management controller. These controls need to be configured by USB driver.
Expose the regmap to these SoCs.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Disable PMC state syncing in order to ensure that we won't break older
kernels once device-trees will be updated with the addition of the power
domains. This also allows to apply device-tree PM patches independently
from the driver patches.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
To bring up the MX8MM GPU domain, it is necessary to configure both
GPC_PGC_nCTRL(GPU_2D) and GPC_PGC_nCTRL(GPU_3D) registers. Without
this configuration, the system might hang on boot when bringing up
the GPU power domain. This is sporadically observed on multiple
disparate systems.
Add the GPU3D bit into MX8MM GPU domain pgc bitfield, so that both
GPC_PGC_nCTRL(GPU_2D) and GPC_PGC_nCTRL(GPU_3D) registers are
configured when bringing up the GPU domain. This fixes the sporadic
hang.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is currently the MX8MM GPU domain, which is in fact a composite domain
for both GPU2D and GPU3D. To correctly configure this domain, it is necessary
to control both GPC_PGC_nCTRL(GPU_2D) and GPC_PGC_nCTRL(GPU_3D) at the same
time. This is currently not possible.
Turn the domain->pgc from value into bitfield and use for_each_set_bit() to
iterate over all bits set in domain->pgc when configuring GPC_PGC_nCTRL
register array. This way it is possible to configure all GPC_PGC_nCTRL
registers required in a particular domain.
This is a preparatory patch, no functional change.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Starting with v5.15-rc1, we may now see some am335x beaglebone black
device produce the following error on pruss probe:
Unhandled fault: external abort on non-linefetch (0x1008) at 0xe0326000
This has started with the enabling of pruss for am335x in the dts files.
Turns out the is caused by the PRM reset handling not waiting for the
reset bit to clear. To fix the issue, let's always wait for the reset
bit to clear, even if there is a separate reset status register.
We attempted to fix a similar issue for dra7 iva with a udelay() in
commit effe89e400 ("soc: ti: omap-prm: Fix occasional abort on reset
deassert for dra7 iva"). There is no longer a need for the udelay()
for dra7 iva reset either with the check added for reset bit clearing.
Cc: Drew Fustini <pdp7pdp7@gmail.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: "H. Nikolaus Schaller" <hns@goldelico.com>
Cc: Robert Nelson <robertcnelson@gmail.com>
Cc: Yongqin Liu <yongqin.liu@linaro.org>
Fixes: effe89e400 ("soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva")
Reported-by: Matti Vaittinen <mazziesaccount@gmail.com>
Tested-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
After converting the Exynos ChipID and ASV driver to a module, allow to
actually choose it to be a module, while being a default built-in. The
side effect is that driver could be now entirely disabled even for
kernel with ARCH_EXYNOS, but this is not a critical issue because driver
is not necessary for the proper platform boot.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org>
Tested-by: Sylwester Nawrocki <snawrocki@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20210919093114.35987-4-krzysztof.kozlowski@canonical.com
Exynos ChipID and ASV (Adaptive Supply Voltage) driver is not essential
to system boot and it can successfully be built and loaded as module.
This makes core kernel image smaller and reduces the memory footprint
when multi-platform kernel is booted on non-Exynos board. Usually it is
also distro-friendly.
Add multiple authors of the driver since its conversion from
mach-exynos, ordered alphabetically by first name.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org>
Tested-by: Sylwester Nawrocki <snawrocki@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20210919093114.35987-3-krzysztof.kozlowski@canonical.com
soc_device_to_device() seems to be discouraged [1] so remove it in favor
of printing info message with platform device. This will only change
the prefix in the info message from "soc soc0: " to "exynos-chipid
10000000.chipid:".
[1] https://lore.kernel.org/lkml/20191111052741.GB3176397@kroah.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org>
Tested-by: Sylwester Nawrocki <snawrocki@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20210919093114.35987-2-krzysztof.kozlowski@canonical.com
Qualcomm Generic Packet router aka GPR is the IPC mechanism found
in AudioReach next generation signal processing framework to perform
command and response messages between various processors.
GPR has concepts of static and dynamic port, all static services like
APM (Audio Processing Manager), PRM (Proxy resource manager) have
fixed port numbers where as dynamic services like graphs have dynamic
port numbers which are allocated at runtime. All GPR packet messages
will have source and destination domain and port along with opcode
and payload.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210927135559.738-6-srinivas.kandagatla@linaro.org
APR and other packet routers like GPR are pretty much same and
interact with other drivers in similar way.
Ex: GPR ports can be considered as APR services, only difference
is they are allocated dynamically.
Other difference is packet layout, which should not matter
with the apis abstracted. Apart from this the rest of the
functionality is pretty much identical across APR and GPR.
Make the apr code more reusable by abstracting it service level,
rather than device level so that we do not need to write
new drivers for other new packet routers like GPR.
This patch is in preparation to add GPR support to this driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210927135559.738-4-srinivas.kandagatla@linaro.org
Strip out the load state power-domain support from the driver since the
low power mode signalling for the co-processors is now accessible through
the direct qmp message send interface.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631800770-371-12-git-send-email-sibis@codeaurora.org
Remote susbsystems notify fatal crash through smp2p interrupt.
When remoteproc crashes it can cause soc to come out of low power
state and may not allow again to enter in low power state until
crash is handled.
Mark smp2p interrupt wakeup capable so that interrupt handler is
executed and remoteproc crash can be handled in system resume path.
This patch marks interrupt wakeup capable but keeps wakeup disabled
by default. User space can enable it based on its requirement for
wakeup from suspend.
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1632220467-27410-1-git-send-email-deesin@codeaurora.org
Disable MMUHWT retention for SC7280 as done for other platforms
to avoid more power burn.
Fixes: f6a07be633 ("soc: qcom: llcc: Add configuration data for SC7280")
Signed-off-by: Naina Mehta <nainmeht@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210921055942.30600-1-saiprakash.ranjan@codeaurora.org
strcpy() performs no bounds checking on the destination buffer. This
could result in linear overflows beyond the end of the buffer, leading
to all kinds of misbehaviors. The safe replacement is strscpy().
This is a previous step in the path to remove the strcpy() function
entirely from the kernel.
Signed-off-by: Len Baker <len.baker@gmx.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210808125012.4715-2-len.baker@gmx.com
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210908080216.1301-6-caihuoqing@baidu.com
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210908080216.1301-5-caihuoqing@baidu.com
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210908080216.1301-4-caihuoqing@baidu.com
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210908080216.1301-3-caihuoqing@baidu.com
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210908080216.1301-2-caihuoqing@baidu.com
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210908080216.1301-1-caihuoqing@baidu.com
IPQ8074 family SoC ID-s are missing, so lets add them based on
the downstream driver.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Kathiravan T <kathirav@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210905171131.660885-1-robimarko@gmail.com
Add support for MSM8953 power domains.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Adam Skladowski <a_skl39@protonmail.com>
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210825170252.20137-1-sireeshkodali1@gmail.com
Implement the support for SAW v4.1, used in at least MSM8998,
SDM630, SDM660 and APQ variants and, while at it, also add the
configuration for the SDM630/660 Silver and Gold cluster L2
Adaptive Voltage Scaler: this is also one of the prerequisites
to allow the OSM controller to perform DCVS.
Please note that despite there are various "versions" of these
values downstream, these are the only ones that are perfectly
stable on the entire set of tested devices.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210729155609.608159-4-angelogioacchino.delregno@somainline.org
In commit a871be6b8e ("cpuidle: Convert Qualcomm SPM driver to a generic
CPUidle driver") the SPM driver has been converted to a
generic CPUidle driver: that was mainly made to simplify the
driver and that was a great accomplishment;
Though, at that time, this driver was only applicable to ARM 32-bit SoCs,
lacking logic about the handling of newer generation SAW.
In preparation for the enablement of SPM features on AArch64/ARM64,
split the cpuidle-qcom-spm driver in two: the CPUIdle related
state machine (currently used only on ARM SoCs) stays there, while
the SPM communication handling lands back in soc/qcom/spm.c and
also making sure to not discard the simplifications that were
introduced in the aforementioned commit.
Since now the "two drivers" are split, the SCM dependency in the
main SPM handling is gone and for this reason it was also possible
to move the SPM initialization early: this will also make sure that
whenever the SAW CPUIdle driver is getting initialized, the SPM
driver will be ready to do the job.
Please note that the anticipation of the SPM initialization was
also done to optimize the boot times on platforms that have their
CPU/L2 idle states managed by other means (such as PSCI), while
needing SAW initialization for other purposes, like AVS control.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210729155609.608159-2-angelogioacchino.delregno@somainline.org
Add LLCC configuration data for SM6350 SoC.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210820203105.229764-6-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the power domains exposed by RPMH in the Qualcomm SM6350 platform.
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210820203105.229764-4-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Not all upcoming usecases will have an interface to allow the aoss
driver to hook onto. Expose the send api and create a get function to
enable drivers to send their own messages to aoss.
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1630420228-31075-2-git-send-email-deesin@codeaurora.org
PT_LOAD type denotes that the segment should be loaded into the final
firmware memory region. Hash segment is not one such, because it's only
needed for PAS init and shouldn't be in the final firmware memory region.
That's why mdt_phdr_valid() explicitly reject non PT_LOAD segment and
hash segment. This actually makes the hash segment type check in
qcom_mdt_read_metadata() unnecessary and redundant. For a hash segment,
it won't be loaded into firmware memory region anyway, due to the
QCOM_MDT_TYPE_HASH check in mdt_phdr_valid(), even if it has a PT_LOAD
type for some reason (misusing or abusing?).
Some firmware files on Sony phones are such examples, e.g WCNSS firmware
of Sony Xperia M4 Aqua phone. The type of hash segment is just PT_LOAD.
Drop the unnecessary hash segment type check in qcom_mdt_read_metadata()
to fix firmware loading failure on these phones, while hash segment is
still kept away from the final firmware memory region.
Fixes: 498b98e939 ("soc: qcom: mdt_loader: Support loading non-split images")
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210828070202.7033-1-shawn.guo@linaro.org
72116 uses a quad core Brahma-B53 CPU complex which uses the same tuning
as done for previous chips, add that chip to the list.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
72113 uses a dual core Cortex-A72 CPU complex which requires tuning of
its bus interface unit the same way that the existing Cortex-A72 based
systems are tuned.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Commit 93618e344a ("soc: samsung: exynos-pmu: instantiate clkout
driver as MFD") adds a "devm_mfd_add_devices" call in the exynos-pmu
driver which depends on CONFIG_MFD_CORE. If no driver selects that
config, the build will fail if CONFIG_EXYNOS_PMU is enabled with the
following error:
drivers/soc/samsung/exynos-pmu.c:137: undefined reference to `devm_mfd_add_devices'
Fix this by making CONFIG_EXYNOS_PMU select CONFIG_MFD_CORE.
Fixes: 93618e344a ("soc: samsung: exynos-pmu: instantiate clkout driver as MFD")
Cc: <stable@vger.kernel.org>
Signed-off-by: David Virag <virag.david003@gmail.com>
Link: https://lore.kernel.org/r/20210909222812.108614-1-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Set qcom_socinfo pointer as data being stored instead of pointer
to soc_device structure. Aligns with future calls to platform_get_data()
which expects qcom_socinfo pointer.
Fixes: efb448d0a3 ("soc: qcom: Add socinfo driver")
Signed-off-by: Antonio Martorana <amartora@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1629159879-95777-1-git-send-email-amartora@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add support for identifying the remaining R-Car Gen3e SoCs: R-Car H3e
(R8A779M0), M3e (R8A779M2), M3Ne (R8A779M4), M3Ne-2G (R8A779M5), E3e
(R8A779M6), D3e (R8A779M7), and H3Ne (R8A779M8).
As these are different gradings of the already supported R-Car Gen3
SoCs, support for them is enabled through the existing ARCH_R8A779*
configuration symbols.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ccf2206b24147b3d977e4119bbdefaedceb28644.1628766192.git.geert+renesas@glider.be
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210908071544.603-2-caihuoqing@baidu.com
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210908071544.603-1-caihuoqing@baidu.com
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210908071716.772-1-caihuoqing@baidu.com
These are updates for drivers that are tied to a particular SoC,
including the correspondig device tree bindings:
- A couple of reset controller changes for unisoc, uniphier, renesas
and zte platforms
- memory controller driver fixes for omap and tegra
- Rockchip io domain driver updates
- Lots of updates for qualcomm platforms, mostly touching their
firmware and power management drivers
- Tegra FUSE and firmware driver updateѕ
- Support for virtio transports in the SCMI firmware framework
- cleanup of ixp4xx drivers, towards enabling multiplatform
support and bringing it up to date with modern platforms
- Minor updates for keystone, mediatek, omap, renesas.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iD8DBQBhLz215t5GS2LDRf4RAjlHAJ473D0PymaTzv68EuPHThG+DEPifQCdGjLq
QGBB6JidIP8rtEdC+LWBB8I=
=M5+N
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are updates for drivers that are tied to a particular SoC,
including the correspondig device tree bindings:
- A couple of reset controller changes for unisoc, uniphier, renesas
and zte platforms
- memory controller driver fixes for omap and tegra
- Rockchip io domain driver updates
- Lots of updates for qualcomm platforms, mostly touching their
firmware and power management drivers
- Tegra FUSE and firmware driver updateѕ
- Support for virtio transports in the SCMI firmware framework
- cleanup of ixp4xx drivers, towards enabling multiplatform support
and bringing it up to date with modern platforms
- Minor updates for keystone, mediatek, omap, renesas"
* tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
reset: simple: remove ZTE details in Kconfig help
soc: rockchip: io-domain: Remove unneeded semicolon
soc: rockchip: io-domain: add rk3568 support
dt-bindings: power: add rk3568-pmu-io-domain support
bus: ixp4xx: return on error in ixp4xx_exp_probe()
soc: renesas: Prefer memcpy() over strcpy()
firmware: tegra: Stop using seq_get_buf()
soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
soc/tegra: fuse: Add runtime PM support
soc/tegra: fuse: Clear fuse->clk on driver probe failure
soc/tegra: pmc: Prevent racing with cpuilde driver
soc/tegra: bpmp: Remove unused including <linux/version.h>
dt-bindings: soc: ti: pruss: Add dma-coherent property
soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex
soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs
dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs
firmware: arm_scmi: Use WARN_ON() to check configured transports
firmware: arm_scmi: Fix boolconv.cocci warnings
soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing
soc: mediatek: mmsys: add MT8365 support
...
There are three noteworthy updates for 32-bit arm platforms this time:
- The Microchip SAMA7 family based on Cortex-A7 gets introduced, a new
cousin to the older SAM9 (ARM9xx based) and SAMA5 (Cortex-A5 based)
SoCs.
- The ixp4xx platform (based on Intel XScale) is finally converted to
device tree, and all the old board files are getting removed now.
- The Cirrus Logic EP93xx platform loses support for the old
MaverickCrunch FPU. Support for compiling user space applications
was already removed in gcc-4.9, and the kernel support for old
applications could not be built with clang ias. After confirming
that there are no remaining users, removing this from the kernel
seemed better than adding support for unused features to clang.
There are minor updates to the aspeed, omap and samsung platforms
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iD8DBQBhL0Bu5t5GS2LDRf4RAtYAAJ9qcN3tF8tHPPBUknXjvQVN7ESntwCfQtPu
XOVR6q993d7EZh3ATYuXVtE=
=igP/
-----END PGP SIGNATURE-----
Merge tag 'soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"There are three noteworthy updates for 32-bit arm platforms this time:
- The Microchip SAMA7 family based on Cortex-A7 gets introduced, a
new cousin to the older SAM9 (ARM9xx based) and SAMA5 (Cortex-A5
based) SoCs.
- The ixp4xx platform (based on Intel XScale) is finally converted to
device tree, and all the old board files are getting removed now.
- The Cirrus Logic EP93xx platform loses support for the old
MaverickCrunch FPU. Support for compiling user space applications
was already removed in gcc-4.9, and the kernel support for old
applications could not be built with clang ias. After confirming
that there are no remaining users, removing this from the kernel
seemed better than adding support for unused features to clang.
There are minor updates to the aspeed, omap and samsung platforms"
* tag 'soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
soc: aspeed-lpc-ctrl: Fix clock cleanup in error path
ARM: s3c: delete unneed local variable "delay"
soc: aspeed: Re-enable FWH2AHB on AST2600
soc: aspeed: socinfo: Add AST2625 variant
soc: aspeed: p2a-ctrl: Fix boundary check for mmap
soc: aspeed: lpc-ctrl: Fix boundary check for mmap
ARM: ixp4xx: Delete the Freecom FSG-3 boardfiles
ARM: ixp4xx: Delete GTWX5715 board files
ARM: ixp4xx: Delete Coyote and IXDPG425 boardfiles
ARM: ixp4xx: Delete Intel reference design boardfiles
ARM: ixp4xx: Delete Avila boardfiles
ARM: ixp4xx: Delete the Arcom Vulcan boardfiles
ARM: ixp4xx: Delete Gateway WG302v2 boardfiles
ARM: ixp4xx: Delete Omicron boardfiles
ARM: ixp4xx: Delete the D-Link DSM-G600 boardfiles
ARM: ixp4xx: Delete NAS100D boardfiles
ARM: ixp4xx: Delete NSLU2 boardfiles
arm: omap2: Drop the unused OMAP_PACKAGE_* KConfig entries
arm: omap2: Drop obsolete MACH_OMAP3_PANDORA entry
ARM: ep93xx: remove MaverickCrunch support
...
Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did the
following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
The latter one will cause a tiny merge issue with your tree, as there
was a last-minute fix for this in 5.14 in your tree, but the fixup
should be "obvious". If you want me to provide a fixed merge for this,
please let me know.
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs
users at once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+FLQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylXuACfWECnysDtXNe66DdETCFs1a1RToYAoMokWeU5
s8VFP1NY2BjmxJbkebLL
=8kVu
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did
the following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs users at
once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue"
* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
MAINTAINERS: Add dri-devel for component.[hc]
driver core: platform: Remove platform_device_add_properties()
ARM: tegra: paz00: Handle device properties with software node API
bitmap: extend comment to bitmap_print_bitmask/list_to_buf
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
topology: use bin_attribute to break the size limitation of cpumap ABI
lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
debugfs: Return error during {full/open}_proxy_open() on rmmod
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
zorro: Simplify remove callback
sh: superhyway: Simplify check in remove callback
nubus: Simplify check in remove callback
nubus: Make struct nubus_driver::remove return void
kernfs: dont call d_splice_alias() under kernfs node lock
kernfs: use i_lock to protect concurrent inode updates
kernfs: switch kernfs to use an rwsem
kernfs: use VFS negative dentry caching
...
Recent builds of the vendor u-boot tree disable features of the
BMC that may allow unwanted access if not correctly configured. This
includes the firmware hub to ahb bridge (FWH2AHB), which is used by this
driver.
The bit to "un-disable" it is in the SCU. Set it only when the ioctl is
called and we are running on the ast2600, as to not open up the
'backdoor' unless there's userspace trying to use it.
Fixes: deb50313ba83 ("soc: aspeed-lpc-ctrl: LPC to AHB mapping on ast2600")
Link: https://lore.kernel.org/r/20210629073520.318514-2-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add AST26XX series AST2625-A3 SOC ID, taken from the vendor u-boot SDK:
arch/arm/mach-aspeed/ast2600/scu_info.c
+ SOC_ID("AST2625-A3", 0x0503040305030403),
Reviewed-by: Dylan Hung <dylan_hung@aspeedtech.com>
Link: https://lore.kernel.org/r/20210818010534.2508122-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
This fixes the "shared memory state machine" (SMSM) interrupt logic to
avoid missing transitions happening while the interrupts are masked.
SM6115 support is added to smd-rpm and rpmpd.
The Qualcomm SCM firmware driver is once again made possible to compile
and load as a kernel module.
An out-of-bounds error related to the cooling devices of the AOSS driver
is corrected. The binding is converted to YAML and a generic compatible
is introduced to reduce the driver churn.
The GENI wrapper gains a helper function used in I2C and SPI for
switching the serial engine hardware to use the wrapper's DMA-engine.
Lastly it contains a number of cleanups and smaller fixes for rpmhpd,
socinfo, CPR, mdt_loader and the GENI DT binding.
-----BEGIN PGP SIGNATURE-----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=88qN
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=dS58
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.15
This fixes the "shared memory state machine" (SMSM) interrupt logic to
avoid missing transitions happening while the interrupts are masked.
SM6115 support is added to smd-rpm and rpmpd.
The Qualcomm SCM firmware driver is once again made possible to compile
and load as a kernel module.
An out-of-bounds error related to the cooling devices of the AOSS driver
is corrected. The binding is converted to YAML and a generic compatible
is introduced to reduce the driver churn.
The GENI wrapper gains a helper function used in I2C and SPI for
switching the serial engine hardware to use the wrapper's DMA-engine.
Lastly it contains a number of cleanups and smaller fixes for rpmhpd,
socinfo, CPR, mdt_loader and the GENI DT binding.
* tag 'qcom-drivers-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: smsm: Fix missed interrupts if state changes while masked
soc: qcom: smsm: Implement support for get_irqchip_state
soc: qcom: mdt_loader: be more informative on errors
dt-bindings: qcom: geni-se: document iommus
soc: qcom: smd-rpm: Add SM6115 compatible
soc: qcom: geni: Add support for gpi dma
soc: qcom: geni: move GENI_IF_DISABLE_RO to common header
PM: AVS: qcom-cpr: Use nvmem_cell_read_variable_le_u32()
drivers: soc: qcom: rpmpd: Add SM6115 RPM Power Domains
dt-bindings: power: rpmpd: Add SM6115 to rpmpd binding
dt-bindings: soc: qcom: smd-rpm: Add SM6115 compatible
soc: qcom: aoss: Fix the out of bound usage of cooling_devs
firmware: qcom_scm: Allow qcom_scm driver to be loadable as a permenent module
soc: qcom: socinfo: Don't print anything if nothing found
soc: qcom: rpmhpd: Use corner in power_off
soc: qcom: aoss: Add generic compatible
dt-bindings: soc: qcom: aoss: Convert to YAML
dt-bindings: soc: qcom: aoss: Add SC8180X and generic compatible
firmware: qcom_scm: remove a duplicative condition
firmware: qcom_scm: Mark string array const
Link: https://lore.kernel.org/r/20210816214840.581244-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Implements runtime PM support for the FUSE block and prepares the driver
to work better in conjunction with the CPUIDLE driver.
-----BEGIN PGP SIGNATURE-----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=migJ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=GgIf
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.15-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
soc/tegra: Changes for v5.15-rc1
Implements runtime PM support for the FUSE block and prepares the driver
to work better in conjunction with the CPUIDLE driver.
* tag 'tegra-for-5.15-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
soc/tegra: fuse: Add runtime PM support
soc/tegra: fuse: Clear fuse->clk on driver probe failure
soc/tegra: pmc: Prevent racing with cpuilde driver
soc/tegra: bpmp: Remove unused including <linux/version.h>
Link: https://lore.kernel.org/r/20210813162157.2820913-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The check mixes pages (vm_pgoff) with bytes (vm_start, vm_end) on one
side of the comparison, and uses resource address (rather than just the
resource size) on the other side of the comparison.
This can allow malicious userspace to easily bypass the boundary check and
map pages that are located outside memory-region reserved by the driver.
Fixes: 01c60dcea9 ("drivers/misc: Add Aspeed P2A control driver")
Cc: stable@vger.kernel.org
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Tested-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The check mixes pages (vm_pgoff) with bytes (vm_start, vm_end) on one
side of the comparison, and uses resource address (rather than just the
resource size) on the other side of the comparison.
This can allow malicious userspace to easily bypass the boundary check and
map pages that are located outside memory-region reserved by the driver.
Fixes: 6c4e976785 ("drivers/misc: Add Aspeed LPC control driver")
Cc: stable@vger.kernel.org
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Tested-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The io-domain registers on RK3568 SoCs have three separated bits to
enable/disable the 1.8v/2.5v/3.3v power.
This patch make the write to be a operation, allow rk3568 uses a private
register set function.
Since the 2.5v mode hasn't been fully validated yet, the driver only sets
1.8v [enable] + 3.3v [disable] for 1.8v mode
1.8v [disable] + 3.3v [enable] for 3.3v mode
There is not register order requirement which has been cleared by our IC
team.
For future reference the full usage matrix including the 2.5V setting is:
case V33 V25 V18 result
0 0 0 0 IO safe, but cannot work
1 0 0 1 IO require 1.8V, should < 1.98V, otherwise IO may damage
2 0 1 0 IO require 2.5V, should < 2.75V, otherwise IO may damage
3 0 1 1 Invalid state, should avoid
4 1 0 0 IO require 3.3V, should < 3.63V, otherwise IO may damage
5 1 0 1 IO require 1.8V, should < 1.98V, otherwise IO may damage
6 1 1 0 IO require 2.5V, should < 2.75V, otherwise IO may damage
7 1 1 1 Invalid state, should avoid
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
[added mode clarification from Jay]
Link: https://lore.kernel.org/r/20210805120107.27007-3-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The patch be7ecbd240b2: "soc: fsl: qe: convert QE interrupt
controller to platform_device" from Aug 3, 2021, leads to the
following static checker warning:
drivers/soc/fsl/qe/qe_ic.c:438 qe_ic_init()
warn: unsigned 'qe_ic->virq_low' is never less than zero.
In old variant irq_of_parse_and_map() returns zero if failed so
unsigned int for virq_high/virq_low was ok.
In new variant platform_get_irq() returns negative error codes
if failed so we need to use int for virq_high/virq_low.
Also simplify high_handler checking and remove the curly braces
to make checkpatch happy.
Fixes: be7ecbd240 ("soc: fsl: qe: convert QE interrupt controller to platform_device")
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
- correct mask define if used for update on TOPAXI bus
- mt8173: enable regulator befor turning on MFG_ASYNC
mmsys:
- add a mask property to the routing information
- add support for MT8365
- add UFOE routing for MT8173
-----BEGIN PGP SIGNATURE-----
iQJLBAABCAA1FiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAmERFHwXHG1hdHRoaWFz
LmJnZ0BnbWFpbC5jb20ACgkQL21+TfbCqH4mQA/9ELF9CHV1QFWlO6UfDblISWiH
h4Z9LoS3wYyxiuREGy+BiNXMLchkTBHP3XYezfLymBsv+h1Z2zaV+jzf3S+rZh/V
FUWMWFeIXMP9w7DFggZAnN0170C/mxnFsrVJYsYVhG709oXZ1ZBMpRJXvkjld5dz
t55Ua5TiOXXinsNHoe30tc06snh1TfPmCguwh6zFTMjC8KLS6J4Y1Zes8Z67kyl8
E+J+LKmiSD/WXYRbHkbWczY8tfKdmGKElxnI7PAmq2Ll6149+LVxG5icE1Jz9nt4
coi/AmITCJSSX3zyNkuE4vcWklqymNf9N7M+DmSI0nYhaBAoXsaQsi+S4PB8Vqmp
enzF6yctaxY298PwzFtK+GMfak6RACfQvPTBKZ29sD4Y3cH4BytqK4fd0L1jzoye
jI2aL+fLsoPWeU7NJoWtglSuozMpsvcVgCBsf93/W1lmoNM1MaQ2PuKjZ4wU5CsD
/FbPfLcUNFcFjbP8X59hktj0PJ10j9wO71Zpl3aM8utcZov0xmM2/WEWBqWW3Cgs
0bxOrESPnV3qlBkxjQJcalPmxqG9eNAW+bDzxqnvDbM3veD1w+rmyZZHbTW3f5Yy
8WKR8jOTTttTa0Pp8BwXOcBj+e5IsHjwhlpi5RtD0qrLPMiydCVZWxs2zUwsju3N
EGyXVsIUiRrzgk308yo=
=Htyk
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=90j0
-----END PGP SIGNATURE-----
Merge tag 'v5.14-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers
pm-domains:
- correct mask define if used for update on TOPAXI bus
- mt8173: enable regulator befor turning on MFG_ASYNC
mmsys:
- add a mask property to the routing information
- add support for MT8365
- add UFOE routing for MT8173
* tag 'v5.14-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing
soc: mediatek: mmsys: add MT8365 support
soc: mmsys: mediatek: add mask to mmsys routes
soc: mediatek: pm-domains: Add domain_supply cap for mfg_async PD
soc: mediatek: pm-domains: Use correct mask for bus_prot_clr
Link: https://lore.kernel.org/r/49fc7bef-20db-b98c-9437-dd9e4d00e870@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
strcpy() performs no bounds checking on the destination buffer. This
could result in linear overflows beyond the end of the buffer, leading
to all kinds of misbehaviors. So, use memcpy() as a safe replacement.
This is a previous step in the path to remove the strcpy() function
entirely from the kernel.
Signed-off-by: Len Baker <len.baker@gmx.com>
Link: https://lore.kernel.org/r/20210808125012.4715-3-len.baker@gmx.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The FUSE clock should be enabled during suspend on Tegra124. Currently
clk driver enables it on all SoCs, but FUSE may require a higher core
voltage on Tegra30 while enabled. Move the quirk into the FUSE driver
and make it specific to Tegra124.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra FUSE belongs to the core power domain and we're going to enable
GENPD support for the core domain. Now FUSE device must be resumed using
runtime PM API in order to initialize the FUSE power state. Add runtime PM
support to the FUSE driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The fuse->clk must be cleared if FUSE driver fails to probe, otherwise
tegra_fuse_readl() will crash. It's unlikely to happen in practice,
nevertheless let's correct it for completeness.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Both PMC and cpuidle drivers are probed at the same init level and
cpuidle depends on the PMC suspend mode. Add new default suspend mode
that indicates whether PMC driver has been probed and reset the mode in
a case of deferred probe of the PMC driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Remove including <linux/version.h> that don't need it.
V1->V2: Split the patch in two
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
For the smartreflex device, we need to disable smartreflex on SoC idle,
and have been using pm_runtime_irq_safe() to do that. But we want to
remove the irq_safe usage as PM runtime takes a permanent usage count
on the parent device with it.
In order to remove the need for pm_runtime_irq_safe(), let's gate
the clock directly in the driver. This removes the need to call PM runtime
during idle, and allows us to switch to using CPU_PM in the following
patch.
Note that the smartreflex interconnect target module is configured for smart
idle, but the clock does not have autoidle capability, and needs to be gated
manually. If the clock supported autoidle, we would not need to even gate
the clock.
With this change, we can now remove the related quirk flags for ti-sysc
also.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
The K3 AM64x family of SoCs have a similar version of the PRU-ICSS (ICSSG)
processor subsystem present on K3 J721E and K3 AM65x SR2.0 SoCs. These SoCs
contain typically two ICSSG instances named ICSSG0 and ICSSG1. The two
ICSSGs are identical to each other for the most part with minor SoC
integration differences and capabilities. SGMII mode is not supported at
all on these SoCs (unlike specific instances on AM65x, J721E). The ICSSG1
also has limited pins connected on some sub-modules compared to ICSSG0.
There is no change in the Interrupt Controller w.r.t either of AM65x or
J721E SoCs. All other integration aspects are also very similar to the
existing SoCs.
The existing pruss platform driver has been updated to support these
similar ICSSG instances through a new AM64x specific compatible.
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Since 5.13 QE's ucc nodes can't get interrupts from devicetree:
ucc@2000 {
cell-index = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
};
Now fw_devlink expects driver to create and probe a struct device
for interrupt controller.
So lets convert this driver to simple platform_device with probe().
Also use platform_get_ and devm_ family function to get/allocate
resources and drop unused .compatible = "qeic".
[1] - https://lore.kernel.org/lkml/CAGETcx9PiX==mLxB9PO8Myyk6u2vhPVwTMsA5NkD-ywH5xhusw@mail.gmail.com
Fixes: e590474768 ("driver core: Set fw_devlink=on by default")
Fixes: ea718c6990 ("Revert "Revert "driver core: Set fw_devlink=on by default""")
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
The UFOE (data compression engine) component needs to be enabled to have
the imgtec gpu driver working. If we don't enable it we see a black screen.
Looks like when we switched to use and array for setting the routing
registers in commit 440147639a ("soc: mediatek: mmsys: Use an array for
setting the routing registers") we missed to add this component in the new
routing table, it was present before that commit, so fix it by adding
this component in the mt8173 routing table.
Fixes: 440147639a ("soc: mediatek: mmsys: Use an array for setting the routing registers")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Eizan Miyamoto <eizan@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210625062448.3462177-1-enric.balletbo@collabora.com
[mb: taking into account mask value]
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The SMSM driver detects interrupt edges by tracking the last state
it has seen (and has triggered the interrupt handler for). This works
fine, but only if the interrupt does not change state while masked.
For example, if an interrupt is unmasked while the state is HIGH,
the stored last_value for that interrupt might still be LOW. Then,
when the remote processor triggers smsm_intr() we assume that nothing
has changed, even though the state might have changed from HIGH to LOW.
Attempt to fix this by checking the current remote state before
unmasking an IRQ. Use atomic operations to avoid the interrupt handler
from interfering with the unmask function.
This fixes modem crashes in some edge cases with the BAM-DMUX driver.
Specifically, the BAM-DMUX interrupt handler is not called for the
HIGH -> LOW smsm state transition if the BAM-DMUX driver is loaded
(and therefore unmasks the interrupt) after the modem was already started:
qcom-q6v5-mss 4080000.remoteproc: fatal error received: a2_task.c:3188:
Assert FALSE failed: A2 DL PER deadlock timer expired waiting for Apps ACK
Fixes: c97c4090ff ("soc: qcom: smsm: Add driver for Qualcomm SMSM")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210712135703.324748-2-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
At the moment there is no way for drivers to get the current state
of the interrupt signal reported by a remote processor. The irqchip
API has generic functionality for this, using irq_get_irqchip_state().
Implement support for getting the IRQCHIP_STATE_LINE_LEVEL by reading
the remote state and checking the bit for the specified IRQ.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210712135703.324748-1-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In __qcom_mdt_load() there are cases where an error occurs that
cause a message to be printed. In some of those cases the errno
value can be helpful to understand exactly what caused the problem.
Print the errno (as well as the firmware file name) where it is
helpful, and in a few cases reword the error message. Consistently
use the private fw_name for the file name.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210315144455.1770492-1-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
GPI DMA is one of the DMA modes supported on geni, this adds support to
enable that mode
Also do better documentation of the enum geni_se_xfer_mode.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210625052213.32260-3-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
GENI_IF_DISABLE_RO is used by geni spi driver as well to check the
status if GENI, so move this to common header qcom-geni-se.h
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210625052213.32260-2-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
SOUT has many bits and need to be cleared before set new value.
Write only could do the clear, but for MOUT, it clears bits that
should not be cleared. So use a mask to reset only the needed bits.
this fixes HDMI issues on MT7623/BPI-R2 since 5.13
Fixes: 440147639a ("soc: mediatek: mmsys: Use an array for setting the routing registers")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210729070549.5514-1-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Let's delete the private function cpr_read_efuse() since it does the
basically the same thing as the new API call
nvmem_cell_read_variable_le_u32().
Differences between the new API call and the old private function:
* less error printing (I assume this is OK).
* will give an error if the value doesn't fit in 32-bits (the old code
would have truncated silently).
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Niklas Cassel <nks@flawful.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210521134437.v2.1.Id1c70158722750aec0673d60c12e46a9c66bbfed@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Sparse reports a compile time warning when dereferencing an
__iomem pointer:
drivers/soc/ixp4xx/ixp4xx-qmgr.c:149:37: warning: dereference of noderef expression
drivers/soc/ixp4xx/ixp4xx-qmgr.c:153:40: warning: dereference of noderef expression
drivers/soc/ixp4xx/ixp4xx-qmgr.c:154:40: warning: dereference of noderef expression
drivers/soc/ixp4xx/ixp4xx-qmgr.c:174:38: warning: dereference of noderef expression
drivers/soc/ixp4xx/ixp4xx-qmgr.c:174:44: warning: dereference of noderef expression
Use __raw_readl() here for consistency with the rest of the file.
This should really get converted to some proper accessor, as the
__raw functions are not meant to be used in drivers, but the driver
has used these since the start, so for the moment, let's only fix
the warning.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: d4c9e9fc97 ("IXP42x: Add QMgr support for IXP425 rev. A0 processors.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When compile-testing with 64-bit resource_size_t, gcc reports an invalid
printk format string:
In file included from include/linux/dma-mapping.h:7,
from drivers/soc/ixp4xx/ixp4xx-npe.c:15:
drivers/soc/ixp4xx/ixp4xx-npe.c: In function 'ixp4xx_npe_probe':
drivers/soc/ixp4xx/ixp4xx-npe.c:694:18: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
dev_info(dev, "NPE%d at 0x%08x-0x%08x not available\n",
Use the special %pR format string to print the resources.
Fixes: 0b458d7b10 ("soc: ixp4xx: npe: Pass addresses as resources")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A couple of fixes on MMDC driver to add missing iounmap() and
clk_disable_unprepare(), and a follow-up fix.
- Fix missing-prototypes warning in SRC driver.
- Revert commit 7d981405d0 ("soc: imx8m: change to use platform
driver"), which breaks i.MX8M system that has CAAM driver enabled.
- One fix on imx53-m53menlo pinctrl configuration.
- Increase the PHY reset duration for imx6qdl-sr-som to fix intermittent
issues where the PHY would be unresponsive every once in a while.
- Add missing flag for in-band signalling between PHY and MAC on
kontron-sl28-var2 board to fix network support.
- Limit the SDIO Clock on Colibri iMX6ULL to 25MHz for fixing wireless
noise issue.
- Fix sysclk node name for LS1028A so that U-Boot is able to update the
"clock-frequency" property.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmD+HlIUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6hLQf/eioNfOs4vSi6Kgjy3xSsB/6dmybK
0kTs9ReNYPBRC/VSMqogR1NpUSC9lnIqBc7LqlyearNdcdbM4OPiiei883vGsm/X
4pI5nc+INp1efSwkKJGaBiUMNjQ5XlNUyr9mR7jYjD0FOngFF/FXrE2vjH498Jk6
6v/I3blGMC6v/eRwAGP/54JdvVNT1VK9+IaGMQhm/cfKFk3dvCVmYaeboiATtR4L
Nfn3Q5FjyBQFw1vpDWf1r13ZFVfcvFENHhrqtYa/PzeRe3aJXRXweanfstVHi2W3
4uBD4wl8G5ll56Xkn4r0jSBkyxQAis/AbTLIJDeDoPhmSI4F9xxWqP+MCg==
=MJbS
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=W2Y5
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.14:
- A couple of fixes on MMDC driver to add missing iounmap() and
clk_disable_unprepare(), and a follow-up fix.
- Fix missing-prototypes warning in SRC driver.
- Revert commit 7d981405d0 ("soc: imx8m: change to use platform
driver"), which breaks i.MX8M system that has CAAM driver enabled.
- One fix on imx53-m53menlo pinctrl configuration.
- Increase the PHY reset duration for imx6qdl-sr-som to fix intermittent
issues where the PHY would be unresponsive every once in a while.
- Add missing flag for in-band signalling between PHY and MAC on
kontron-sl28-var2 board to fix network support.
- Limit the SDIO Clock on Colibri iMX6ULL to 25MHz for fixing wireless
noise issue.
- Fix sysclk node name for LS1028A so that U-Boot is able to update the
"clock-frequency" property.
* tag 'imx-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx: Swap M53Menlo pinctrl_power_button/pinctrl_power_out pins
ARM: imx: fix missing 3rd argument in macro imx_mmdc_perf_init
ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHz
arm64: dts: ls1028: sl28: fix networking for variant 2
Revert "soc: imx8m: change to use platform driver"
ARM: dts: imx6qdl-sr-som: Increase the PHY reset duration to 10ms
ARM: imx: common: Move prototype outside the SMP block
ARM: imx: add missing clk_disable_unprepare()
ARM: imx: add missing iounmap()
arm64: dts: ls1028a: fix node name for the sysclk
Link: https://lore.kernel.org/r/20210726023221.GF5901@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The regulator coupler drivers now use regulator-driver API function that
isn't available during compile-testing. Make regulator coupler drivers
dependent on CONFIG_REGULATOR in Kconfig.
Fixes: 03978d42ed ("soc/tegra: regulators: Bump voltages on system reboot")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support for identifying the R-Car H3e-2G (R8A779M1) and R-Car M3e-2G
(R8A779M3) SoCs.
As these are different gradings of the already supported R-Car H3 ES3.0
(R8A77951) and M3-W+ (R8A77961) SoCs, support for them is enabled
through the existing ARCH_R8A77951 and ARCH_R8A77961 configuration
symbols.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/42b4578ab4739cb48ec3aed0a447fc40c34de1e5.1626708063.git.geert+renesas@glider.be
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In "qmp_cooling_devices_register", the count value is initially
QMP_NUM_COOLING_RESOURCES, which is 2. Based on the initial count value,
the memory for cooling_devs is allocated. Then while calling the
"qmp_cooling_device_add" function, count value is post-incremented for
each child node.
This makes the out of bound access to the cooling_dev array. Fix it by
passing the QMP_NUM_COOLING_RESOURCES definition to devm_kzalloc() and
initializing the count to 0.
While at it, let's also free the memory allocated to cooling_dev if no
cooling device is found in DT and during unroll phase.
Cc: stable@vger.kernel.org # 5.4
Fixes: 05589b30b2 ("soc: qcom: Extend AOSS QMP driver to support resources that are used to wake up the SoC.")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210629153249.73428-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Let's skip printing anything if there's nothing to see. This makes it so
the file length is 0 instead of 1, for the newline, and helps scripts
figure out if there's anything to see in these files.
Cc: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210628030150.2627905-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
rpmhpd_aggregate_corner() takes a corner as parameter, but in
rpmhpd_power_off() the code requests the level of the first corner
instead.
In all (known) current cases the first corner has level 0, so this
change should be a nop, but in case that there's a power domain with a
non-zero lowest level this makes sure that rpmhpd_power_off() actually
requests the lowest level - which is the closest to "power off" we can
get.
While touching the code, also skip the unnecessary zero-initialization
of "ret".
Fixes: 279b7e8a62 ("soc: qcom: rpmhpd: Add RPMh power domain driver")
Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Tested-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20210703005416.2668319-2-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
It seems we don't need platform specific implementation for the AOSS
QMP, so let's introduce a generic compatible to avoid having to update
the driver for each platform.
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Tested-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20210709174142.1274554-4-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
With the SoC matching changed to a platform driver the match data
is available only after other drivers, which may rely on it are
already probed. This breaks at least the CAAM driver on i.MX8M.
Revert the change until all those drivers have been audited and
changed to be able to eal with match data being available later
in the boot process.
Fixes: 7d981405d0 ("soc: imx8m: change to use platform driver")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Merely enabling CONFIG_COMPILE_TEST should not enable additional code.
To fix this, restrict the automatic enabling of ROCKCHIP_GRF to
ARCH_ROCKCHIP, and ask the user in case of compile-testing.
Fixes: 4c58063d42 ("soc: rockchip: add driver handling grf setup")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210208143855.418374-1-geert+renesas@glider.be
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The mfg_async power domain in mt8173 is used to power up imgtec
gpu. This domain requires the da9211 regulator to be enabled before
the power domain can be enabled successfully.
Signed-off-by: Bilal Wasim <Bilal.Wasim@imgtec.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210701114012.RESEND.2.I2e1bf1b589f9138ba6f89791ed9f1e9f3ddd0a5d@changeid
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
When "bus_prot_reg_update" is true, the driver should use
INFRA_TOPAXI_PROTECTEN for both setting and clearing the bus
protection. However, the driver does not use this mask for
clearing bus protection which causes failure when booting
the imgtec gpu.
Corrected and tested with mt8173 chromebook.
Signed-off-by: Bilal Wasim <Bilal.Wasim@imgtec.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210701114012.RESEND.1.I27436c29c3bede46dcf86df696f48683662d1ec1@changeid
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
- Reset controllers: Adding support for Microchip Sparx5 Switch.
- Memory controllers: ARM Primecell PL35x SMC memory controller
driver cleanups and improvements.
- i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN.
- Rockchip: RK3568 power domains support + DT binding updates,
cleanups.
- Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details,
including support for MSM8226, MDM9607, SM6125 and SC8180X.
- ARM FFA driver: "Firmware Framework for ARMv8-A", defining
management interfaces and communication (including bus model)
between partitions both in Normal and Secure Worlds.
- Tegra Memory controller changes, including major rework to deal
with identity mappings at boot and integration with ARM SMMU
pieces.
-----BEGIN PGP SIGNATURE-----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=kPg8
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Olof Johansson:
- Reset controllers: Adding support for Microchip Sparx5 Switch.
- Memory controllers: ARM Primecell PL35x SMC memory controller driver
cleanups and improvements.
- i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN.
- Rockchip: RK3568 power domains support + DT binding updates,
cleanups.
- Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details,
including support for MSM8226, MDM9607, SM6125 and SC8180X.
- ARM FFA driver: "Firmware Framework for ARMv8-A", defining management
interfaces and communication (including bus model) between partitions
both in Normal and Secure Worlds.
- Tegra Memory controller changes, including major rework to deal with
identity mappings at boot and integration with ARM SMMU pieces.
* tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (120 commits)
firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string
firmware: turris-mox-rwtm: show message about HWRNG registration
firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng
firmware: turris-mox-rwtm: report failures better
firmware: turris-mox-rwtm: fix reply status decoding function
soc: imx: gpcv2: add support for i.MX8MN power domains
dt-bindings: add defines for i.MX8MN power domains
firmware: tegra: bpmp: Fix Tegra234-only builds
iommu/arm-smmu: Use Tegra implementation on Tegra186
iommu/arm-smmu: tegra: Implement SID override programming
iommu/arm-smmu: tegra: Detect number of instances at runtime
dt-bindings: arm-smmu: Add Tegra186 compatible string
firmware: qcom_scm: Add MDM9607 compatible
soc: qcom: rpmpd: Add MDM9607 RPM Power Domains
soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's
soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's
dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml
memory: emif: remove unused frequency and voltage notifiers
memory: fsl_ifc: fix leak of private memory on probe failure
memory: fsl_ifc: fix leak of IO mapping on probe failure
...
A few SoC (code) changes have queued up this cycle, mostly for minor
changes and some refactoring and cleanup of legacy platforms. This
branch also contains a few of the fixes that weren't sent in by the end
of the release (all fairly minor).
- Adding an additional maintainer for the TEE subsystem (Sumit Garg)
- Quite a significant modernization of the IXP4xx platforms by Linus
Walleij, revisiting with a new PCI host driver/binding, removing legacy
mach/* include dependencies and moving platform detection/config to
drivers/soc. Also some updates/cleanup of platform data.
- Core power domain support for Tegra platforms, and some improvements
in build test coverage by adding stubs for compile test targets.
- A handful of updates to i.MX platforms, adding legacy (non-PSCI) SMP
support on i.MX7D, SoC ID setup for i.MX50, removal of platform data
and board fixups for iMX6/7.
... and a few smaller changes and fixes for Samsung, OMAP, Allwinner,
Rockchip.
-----BEGIN PGP SIGNATURE-----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=b6Jo
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Olof Johansson:
"A few SoC (code) changes have queued up this cycle, mostly for minor
changes and some refactoring and cleanup of legacy platforms. This
branch also contains a few of the fixes that weren't sent in by the
end of the release (all fairly minor).
- Adding an additional maintainer for the TEE subsystem (Sumit Garg)
- Quite a significant modernization of the IXP4xx platforms by Linus
Walleij, revisiting with a new PCI host driver/binding, removing
legacy mach/* include dependencies and moving platform
detection/config to drivers/soc. Also some updates/cleanup of
platform data.
- Core power domain support for Tegra platforms, and some
improvements in build test coverage by adding stubs for compile
test targets.
- A handful of updates to i.MX platforms, adding legacy (non-PSCI)
SMP support on i.MX7D, SoC ID setup for i.MX50, removal of platform
data and board fixups for iMX6/7.
... and a few smaller changes and fixes for Samsung, OMAP, Allwinner,
Rockchip"
* tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (53 commits)
MAINTAINERS: Add myself as TEE subsystem reviewer
ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device"
hw_random: ixp4xx: Add OF support
hw_random: ixp4xx: Add DT bindings
hw_random: ixp4xx: Turn into a module
hw_random: ixp4xx: Use SPDX license tag
hw_random: ixp4xx: enable compile-testing
pata: ixp4xx: split platform data to its own header
soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h
PCI: ixp4xx: Add a new driver for IXP4xx
PCI: ixp4xx: Add device tree bindings for IXP4xx
ARM/ixp4xx: Make NEED_MACH_IO_H optional
ARM/ixp4xx: Move the virtual IObases
MAINTAINERS: ARM/MStar/Sigmastar SoCs: Add a link to the MStar tree
ARM: debug: add UART early console support for MSTAR SoCs
ARM: dts: ux500: Fix LED probing
ARM: imx: add smp support for imx7d
ARM: imx6q: drop of_platform_default_populate() from init_machine
arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory
soc/tegra: fuse: Fix Tegra234-only builds
...
This adds support for controlling the PRU and R5F clusters on the TI
AM64x, the remote processor in i.MX7ULP, i.MX8MN/P and i.MX8ULP NXP and
the audio, compute and modem remoteprocs in the Qualcomm SC8180x
platform.
It fixes improper ordering of cdev and device creation of the remoteproc
control interface and it fixes resource leaks in the error handling path
of rproc_add() and the Qualcomm modem and wifi remoteproc drivers.
Lastly it fixes a few build warnings and replace the dummy parameter
passed in the mailbox api of the stm32 driver to something not living on
the stack.
-----BEGIN PGP SIGNATURE-----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=mf8k
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This adds support for controlling the PRU and R5F clusters on the TI
AM64x, the remote processor in i.MX7ULP, i.MX8MN/P and i.MX8ULP NXP
and the audio, compute and modem remoteprocs in the Qualcomm SC8180x
platform.
It fixes improper ordering of cdev and device creation of the
remoteproc control interface and it fixes resource leaks in the error
handling path of rproc_add() and the Qualcomm modem and wifi
remoteproc drivers.
Lastly it fixes a few build warnings and replace the dummy parameter
passed in the mailbox api of the stm32 driver to something not living
on the stack"
* tag 'rproc-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (32 commits)
remoteproc: qcom: pas: Add SC8180X adsp, cdsp and mpss
dt-bindings: remoteproc: qcom: pas: Add SC8180X adsp, cdsp and mpss
remoteproc: imx_rproc: support i.MX8ULP
dt-bindings: remoteproc: imx_rproc: support i.MX8ULP
remoteproc: stm32: fix mbox_send_message call
remoteproc: core: Cleanup device in case of failure
remoteproc: core: Fix cdev remove and rproc del
remoteproc: core: Move validate before device add
remoteproc: core: Move cdev add before device add
remoteproc: pru: Add support for various PRU cores on K3 AM64x SoCs
dt-bindings: remoteproc: pru: Update bindings for K3 AM64x SoCs
remoteproc: qcom_wcnss: Use devm_qcom_smem_state_get()
remoteproc: qcom_q6v5: Use devm_qcom_smem_state_get() to fix missing put()
soc: qcom: smem_state: Add devm_qcom_smem_state_get()
dt-bindings: remoteproc: qcom: pas: Fix indentation warnings
remoteproc: imx-rproc: Fix IMX_REMOTEPROC configuration
remoteproc: imx_rproc: support i.MX8MN/P
remoteproc: imx_rproc: support i.MX7ULP
remoteproc: imx_rproc: make clk optional
remoteproc: imx_rproc: initial support for mutilple start/stop method
...
One change to simplify Litex CSR (MMIO register) access by limiting them
to 32-bit offsets. Now this is agreed among Litex hardware and kernel
developers it will allow us to start upstreaming other Litex peripheral
drivers.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE2cRzVK74bBA6Je/xw7McLV5mJ+QFAmDj+lAACgkQw7McLV5m
J+Sccg/9GAhyRbmgRQcVKnhQJBIlDRs1jdGC8Xzt5CWaduAKm9Bi3oQEH26TcEkh
mDckHRYFwtdMq8bioqf+QxlyxctbaP8EvrGmmWpB79ZR5SXSsAJc6+ZxbS4Hz01W
lXKpkYWdYtzXz0zEMdwgdxijdHG/eyFaERxUi9URbh4Ts6F4OoEEaphnGISv8lqV
WkOMAcrezHFGaU3jpqs6a8XOGRlxSTv3zYkgdFEiJ8KBXJn2AatPlrVhj2ctC7iw
37GfbbS75cbCn3CTittKPARk27IgkR2zBw1jEZ6gNBUoacx2DoyZYHdEFwnXFaA8
LIwkwLxHw+DAqpGl7GeQ9X8k8O0llyGSXACd2OrIcr9PELaD0/IDpGjh+kuIMmNb
DWQUIU6P+3EVYy6bHlTGxAKfEOGOq4VVwOY3QtgIDb3Xb0zpzgXExbdRnru5mPX3
Jz5ElYNqUXhHASfE5k5q/sR/3if6tDx5EZ6YRqUpLyx1x/S0ne0p/xbgNlx7DYkq
uis46848wa7OxpVBF6K0Cl1NNk9UQEaMQhBfO4gwg12+O1Hv0NGYS16zgd8gUIae
PbKWIAwLkwOqNC9Du5/YCqNZxc0ouOPm7TxYRd4//CDBUNhJpVlRGptLkHKRuCX4
0pjFYc7GHrg8p4d0dvddDOfi5VWzsf+VKq72roOypNJAygGlgio=
=TUKh
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"One change to simplify Litex CSR (MMIO register) access by limiting
them to 32-bit offsets.
Now that this is agreed on among Litex hardware and kernel developers
it will allow us to start upstreaming other Litex peripheral drivers"
* tag 'for-linus' of git://github.com/openrisc/linux:
drivers/soc/litex: remove 8-bit subregister option
Merge more updates from Andrew Morton:
"190 patches.
Subsystems affected by this patch series: mm (hugetlb, userfaultfd,
vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock,
migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap,
zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc,
core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs,
signals, exec, kcov, selftests, compress/decompress, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
ipc/util.c: use binary search for max_idx
ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
ipc: use kmalloc for msg_queue and shmid_kernel
ipc sem: use kvmalloc for sem_undo allocation
lib/decompressors: remove set but not used variabled 'level'
selftests/vm/pkeys: exercise x86 XSAVE init state
selftests/vm/pkeys: refill shadow register after implicit kernel write
selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
kcov: add __no_sanitize_coverage to fix noinstr for all architectures
exec: remove checks in __register_bimfmt()
x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned
hfsplus: report create_date to kstat.btime
hfsplus: remove unnecessary oom message
nilfs2: remove redundant continue statement in a while-loop
kprobes: remove duplicated strong free_insn_page in x86 and s390
init: print out unknown kernel parameters
checkpatch: do not complain about positive return values starting with EPOLL
checkpatch: improve the indented label test
checkpatch: scripts/spdxcheck.py now requires python3
...
that's just a bunch of data so the diffstat reflects that. Looking beyond that
there's just a bunch of updates all around in various clk drivers. Renesas and
NXP (for i.MX) are two SoC vendors that have a lot of patches in here. Overall
the driver changes look to be mostly enabling more clks and non-critical fixes
that we could hold until the next merge window.
I'm especially excited about the series from Arnd that graduates clkdev to be
the only implementation of clk_get() and clk_put(). That's a good step in the
right direction to migreate eveerything over to the common clk framework. Now
we don't have to worry about clkdev specific details, they're just part of the
clk API now.
Core:
- clkdev is now the only option, i.e. clk_get()/clk_put() is implemented in
only one place in the kernel instead of in drivers/clk/clkdev.c and in
architectures that want their own implementation
New Drivers:
- Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant Clock
Jitter Cleaner With Dual Loop PLLs
- Qualcomm MDM9607 GCC
- Qualcomm SC8180X display clks
- Qualcomm SM6125 GCC
- Qualcomm SM8250 CAMCC (camera)
- Renesas RZ/G2L SoC
- Hisilicon hi3559A SoC
Updates:
- Stop using clock-output-names in ST clk drivers (yay!)
- Support secure mode of STM32MP1 SoCs
- Improve clock support for Actions S500 SoC
- duty cycle setting support on qcom clks
- Add TI am33xx spread spectrum clock support
- Use determine_rate() for the Amlogic pll ops instead of round_rate()
- Restrict Amlogic gp0/1 and audio plls range on g12a/sm1
- Improve Amlogic axg-audio controller error on deferral
- Add NNA clocks on Amlogic g12a
- Reduce memory footprint of Rockchip PLL rate tables
- A fix for the newly added Rockchip rk3568 clk driver
- Exported clock for the newly added Rockchip video decoder
- Remove audio ipg clock from i.MX8MP
- Remove deprecated legacy clock binding for i.MX SCU clock driver
- Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM
- Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif, audio,
parallel interface)
- Add dedicated clock ops for i.MX paralel interface
- Different fixes for clocks controlled by ATF on i.MX SoCs
- Add A53/A72 frequency scaling support i.MX clk-scu driver
- Add special case for DCSS clock on suspend for i.MX clk-scu driver
- Add parent save/restore on suspend/resume to i.MX clk-scu driver
- Skip runtime PM enablement for CPU clocks in i.MX clk-scu driver
- Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their
bindings
- Tegra clk driver no longer deasserts resets on clk_enable as it
gets in the way of certain power-up sequences
- Fix compile testing for Tegra clk driver
- One patch to fix a divider on the Allwinner v3s Audio PLL
- Add support for CPU core clock boost modes on Renesas R-Car Gen3
- Add ISPCS (Image Signal Processor) clocks on Renesas R-Car V3U
- Switch SH/R-Mobile and R-Car "DIV6" clocks to .determine_rate()
and improve support for multiple parents
- Switch Renesas RZ/N1 divider clocks to .determine_rate()
- Add ZA2 (Audio Clock Generator) clock on Renesas R-Car D3
- Convert ar7 to common clk framework
- Convert ralink to common clk framework
-----BEGIN PGP SIGNATURE-----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=YnCF
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This round has a diffstat dominated by Qualcomm clk drivers. Honestly
though that's just a bunch of data so the diffstat reflects that.
Looking beyond that there's just a bunch of updates all around in
various clk drivers. Renesas and NXP (for i.MX) are two SoC vendors
that have a lot of patches in here.
Overall the driver changes look to be mostly enabling more clks and
non-critical fixes that we could hold until the next merge window.
I'm especially excited about the series from Arnd that graduates
clkdev to be the only implementation of clk_get() and clk_put().
That's a good step in the right direction to migreate eveerything over
to the common clk framework. Now we don't have to worry about clkdev
specific details, they're just part of the clk API now.
Core:
- clkdev is now the only option, i.e. clk_get()/clk_put() is
implemented in only one place in the kernel instead of in
drivers/clk/clkdev.c and in architectures that want their own
implementation
New Drivers:
- Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant
Clock Jitter Cleaner With Dual Loop PLLs
- Qualcomm MDM9607 GCC
- Qualcomm SC8180X display clks
- Qualcomm SM6125 GCC
- Qualcomm SM8250 CAMCC (camera)
- Renesas RZ/G2L SoC
- Hisilicon hi3559A SoC
Updates:
- Stop using clock-output-names in ST clk drivers (yay!)
- Support secure mode of STM32MP1 SoCs
- Improve clock support for Actions S500 SoC
- duty cycle setting support on qcom clks
- Add TI am33xx spread spectrum clock support
- Use determine_rate() for the Amlogic pll ops instead of
round_rate()
- Restrict Amlogic gp0/1 and audio plls range on g12a/sm1
- Improve Amlogic axg-audio controller error on deferral
- Add NNA clocks on Amlogic g12a
- Reduce memory footprint of Rockchip PLL rate tables
- A fix for the newly added Rockchip rk3568 clk driver
- Exported clock for the newly added Rockchip video decoder
- Remove audio ipg clock from i.MX8MP
- Remove deprecated legacy clock binding for i.MX SCU clock driver
- Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM
- Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif,
audio, parallel interface)
- Add dedicated clock ops for i.MX paralel interface
- Different fixes for clocks controlled by ATF on i.MX SoCs
- Add A53/A72 frequency scaling support i.MX clk-scu driver
- Add special case for DCSS clock on suspend for i.MX clk-scu driver
- Add parent save/restore on suspend/resume to i.MX clk-scu driver
- Skip runtime PM enablement for CPU clocks in i.MX clk-scu driver
- Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their
bindings
- Tegra clk driver no longer deasserts resets on clk_enable as it
gets in the way of certain power-up sequences
- Fix compile testing for Tegra clk driver
- One patch to fix a divider on the Allwinner v3s Audio PLL
- Add support for CPU core clock boost modes on Renesas R-Car Gen3
- Add ISPCS (Image Signal Processor) clocks on Renesas R-Car V3U
- Switch SH/R-Mobile and R-Car "DIV6" clocks to .determine_rate() and
improve support for multiple parents
- Switch Renesas RZ/N1 divider clocks to .determine_rate()
- Add ZA2 (Audio Clock Generator) clock on Renesas R-Car D3
- Convert ar7 to common clk framework
- Convert ralink to common clk framework"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (161 commits)
clk: zynqmp: Handle divider specific read only flag
clk: zynqmp: Use firmware specific mux clock flags
clk: zynqmp: Use firmware specific divider clock flags
clk: zynqmp: Use firmware specific common clock flags
clk: lmk04832: Use of match table
clk: lmk04832: Depend on SPI
clk: stm32mp1: new compatible for secure RCC support
dt-bindings: clock: stm32mp1 new compatible for secure rcc
dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15
dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15
dt-bindings: clock: add IDs for SCMI clocks on stm32mp15
reset: stm32mp1: remove stm32mp1 reset
clk: hisilicon: Add clock driver for hi3559A SoC
dt-bindings: Document the hi3559a clock bindings
clk: si5341: Add sysfs properties to allow checking/resetting device faults
clk: si5341: Add silabs,iovdd-33 property
clk: si5341: Add silabs,xaxb-ext-clk property
clk: si5341: Allow different output VDD_SEL values
clk: si5341: Update initialization magic
clk: si5341: Check for input clock presence and PLL lock on startup
...
kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out panic and
oops helpers.
There are several purposes of doing this:
- dropping dependency in bug.h
- dropping a loop by moving out panic_notifier.h
- unload kernel.h from something which has its own domain
At the same time convert users tree-wide to use new headers, although for
the time being include new header back to kernel.h to avoid twisted
indirected includes for existing users.
[akpm@linux-foundation.org: thread_info.h needs limits.h]
[andriy.shevchenko@linux.intel.com: ia64 fix]
Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull crypto updates from Herbert Xu:
"Algorithms:
- Fix rmmod crash with x86/curve25519
- Add ECDH NIST P384
- Generate assembly files at build-time with perl scripts on arm
- Switch to HMAC SHA512 DRBG as default DRBG
Drivers:
- Add sl3516 crypto engine
- Add ECDH NIST P384 support in hisilicon/hpre
- Add {ofb,cfb,ctr} over {aes,sm4} in hisilicon/sec
- Add {ccm,gcm} over {aes,sm4} in hisilicon/sec
- Enable omap hwrng driver for TI K3 family
- Add support for AEAD algorithms in qce"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (142 commits)
crypto: sl3516 - depends on HAS_IOMEM
crypto: hisilicon/qm - implement for querying hardware tasks status.
crypto: sl3516 - Fix build warning without CONFIG_PM
MAINTAINERS: update caam crypto driver maintainers list
crypto: nx - Fix numerous sparse byte-order warnings
crypto: nx - Fix RCU warning in nx842_OF_upd_status
crypto: api - Move crypto attr definitions out of crypto.h
crypto: nx - Fix memcpy() over-reading in nonce
crypto: hisilicon/sec - Fix spelling mistake "fallbcak" -> "fallback"
crypto: sa2ul - Remove unused auth_len variable
crypto: sl3516 - fix duplicated inclusion
crypto: hisilicon/zip - adds the max shaper type rate
crypto: hisilicon/hpre - adds the max shaper type rate
crypto: hisilicon/sec - adds the max shaper type rate
crypto: hisilicon/qm - supports to inquiry each function's QoS
crypto: hisilicon/qm - add pf ping single vf function
crypto: hisilicon/qm - merges the work initialization process into a single function
crypto: hisilicon/qm - add the "alg_qos" file node
crypto: hisilicon/qm - supports writing QoS int the host
crypto: api - remove CRYPTOA_U32 and related functions
...
Stephan Gerhold