Remove the explicit prefetch check when using vfio-ccw devices.
This check does not trigger in practice as all Linux channel programs
are intended to use prefetch.
It is expected that all ORBs issued by Linux will request prefetch.
Although non-prefetching ORBs are not rejected, they will prefetch
nonetheless. A warning is issued up to once per 5 seconds when a
forced prefetch occurs.
A non-prefetch ORB does not necessarily result in an error, however
frequent encounters with non-prefetch ORBs indicate that channel
programs are being executed in a way that is inconsistent with what
the guest is requesting. While there is currently no known case of an
error caused by forced prefetch, it is possible in theory that forced
prefetch could result in an error if applied to a channel program that
is dependent on non-prefetch.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20200506212440.31323-2-jrossi@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We don't set cp->initialized to true so calling cp_free
will just return and not do anything.
Also fix a memory leak where we fail to free a ccwchain
on an error.
Fixes: 812271b910 ("s390/cio: Squash cp_free() and cp_unpin_free()")
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <3173c4216f4555d9765eb6e4922534982bc820e4.1562854091.git.alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The comment is misleading because it tells us that
we should set orb.cmd.c64 before calling ccwchain_calc_length,
otherwise the function ccwchain_calc_length would return an
error. This is not completely accurate.
We want to allow an orb without cmd.c64, and this is fine
as long as the channel program does not use IDALs. But we do
want to reject any channel program that uses IDALs and does
not set the flag, which is what we do in ccwchain_calc_length.
After we have done the ccw processing, we need to set cmd.c64,
as we use IDALs for all translated channel programs.
Also for better code readability let's move the setting of
cmd.c64 within the non error path.
Fixes: fb9e7880af ("vfio: ccw: push down unsupported IDA check")
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <f68636106aef0faeb6ce9712584d102d1b315ff8.1562854091.git.alifm@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When processing Format-0 CCWs, we use the "len" variable as the
number of CCWs to convert to Format-1. But that variable
contains zero here, and is not a meaningful CCW count until
ccwchain_calc_length() returns. Since that routine requires and
expects Format-1 CCWs to identify the chaining behavior, the
format conversion must be done first.
Convert the 2KB we copied even if it's more than we need.
Fixes: 7f8e89a8f2 ("vfio-ccw: Factor out the ccw0-to-ccw1 transition")
Reported-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190702180928.18113-1-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Just to keep things tidy.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-6-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This is a really useful function, but it's buried in the
copy_ccw_from_iova() routine so that ccwchain_calc_length()
can just work with Format-1 CCWs while doing its counting.
But it means we're translating a full 2K of "CCWs" to Format-1,
when in reality there's probably far fewer in that space.
Let's factor it out, so maybe we can do something with it later.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-5-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It doesn't make much sense to "hide" the copy to the channel_program
struct inside a routine that calculates the length of the chain.
Let's move it to the calling routine, which will later copy from
channel_program to the memory it allocated itself.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-4-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We already pinned/copied/unpinned 2K (256 CCWs) of guest memory
to the host space anchored off vfio_ccw_private. There's no need
to do that again once we have the length calculated, when we could
just copy the section we need to the "permanent" space for the I/O.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-3-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Rather than allocating/freeing a piece of memory every time
we try to figure out how long a CCW chain is, let's use a piece
of memory allocated for each device.
The io_mutex added with commit 4f76617378 ("vfio-ccw: protect
the I/O region") is held for the duration of the VFIO_CCW_EVENT_IO_REQ
event that accesses/uses this space, so there should be no race
concerns with another CPU attempting an (unexpected) SSCH for the
same device.
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-2-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
With both the direct-addressed and indirect-addressed CCW paths
simplified to this point, the amount of shared code between them is
(hopefully) more easily visible. Move the processing of IDA-specific
bits into the direct-addressed path, and add some useful commentary of
what the individual pieces are doing. This allows us to remove the
entire ccwchain_fetch_idal() routine and maintain a single function
for any non-TIC CCW.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-10-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This is purely deck furniture, to help understand the merge of the
direct and indirect handlers.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-9-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now that both CCW codepaths build this nested array:
ccwchain->pfn_array_table[1]->pfn_array[#idaws/#pages]
We can collapse this into simply:
ccwchain->pfn_array[#idaws/#pages]
Let's do that, so that we don't have to continually navigate two
nested arrays when the first array always has a count of one.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-8-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now that pfn_array_table[] is always an array of 1, it seems silly to
check for the very first entry in an array in the middle of two nested
loops, since we know it'll only ever happen once.
Let's move this outside the loops to simplify things, even though
the "k" variable is still necessary.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-7-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
While processing a channel program, we currently have two nested
arrays that carry a slightly different structure. The direct CCW
path creates this:
ccwchain->pfn_array_table[1]->pfn_array[#pages]
while an IDA CCW creates:
ccwchain->pfn_array_table[#idaws]->pfn_array[1]
The distinction appears to state that each pfn_array_table entry
points to an array of contiguous pages, represented by a pfn_array,
um, array. Since the direct-addressed scenario can ONLY represent
contiguous pages, it makes the intermediate array necessary but
difficult to recognize. Meanwhile, since an IDAL can contain
non-contiguous pages and there is no logic in vfio-ccw to detect
adjacent IDAWs, it is the second array that is necessary but appearing
to be superfluous.
I am not aware of any documentation that states the pfn_array[] needs
to be of contiguous pages; it is just what the code does today.
I don't see any reason for this either, let's just flip the IDA
codepath around so that it generates:
ch_pat->pfn_array_table[1]->pfn_array[#idaws]
This will bring it in line with the direct-addressed codepath,
so that we can understand the behavior of this memory regardless
of what type of CCW is being processed. And it means the casual
observer does not need to know/care whether the pfn_array[]
represents contiguous pages or not.
NB: The existing vfio-ccw code only supports 4K-block Format-2 IDAs,
so that "#pages" == "#idaws" in this area. This means that we will
have difficulty with this overlap in terminology if support for
Format-1 or 2K-block Format-2 IDAs is ever added. I don't think that
this patch changes our ability to make that distinction.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-6-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It is now pretty apparent that ccwchain_handle_ccw()
(nee ccwchain_handle_tic()) does everything that cp_init()
wants to do.
Let's remove that duplicated code from cp_init() and let
ccwchain_handle_ccw() handle it itself.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-5-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Refactor ccwchain_handle_tic() into a routine that handles a channel
program address (which itself is a CCW pointer), rather than a CCW pointer
that is only a TIC CCW. This will make it easier to reuse this code for
other CCW commands.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-4-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Extract the "does the target of this TIC already exist?" check from
ccwchain_handle_tic(), so that it's easier to refactor that function
into one that cp_init() is able to use.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-3-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The routine cp_free() does nothing but call cp_unpin_free(), and while
most places call cp_free() there is one caller of cp_unpin_free() used
when the cp is guaranteed to have not been marked initialized.
This seems like a dubious way to make a distinction, so let's combine
these routines and make cp_free() do all the work.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-2-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
If the CCW being processed is a No-Operation, then by definition no
data is being transferred. Let's fold those checks into the normal
CCW processors, rather than skipping out early.
Likewise, if the CCW being processed is a "test" (a category defined
here as an opcode that contains zero in the lowest four bits) then no
special processing is necessary as far as vfio-ccw is concerned.
These command codes have not been valid since the S/370 days, meaning
they are invalid in the same way as one that ends in an eight [1] or
an otherwise valid command code that is undefined for the device type
in question. Considering that, let's just process "test" CCWs like
any other CCW, and send everything to the hardware.
[1] POPS states that a x08 is a TIC CCW, and that having any high-order
bits enabled is invalid for format-1 CCWs. For format-0 CCWs, the
high-order bits are ignored.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190516161403.79053-4-farman@linux.ibm.com>
Acked-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It is possible that a guest might issue a CCW with a length of zero,
and will expect a particular response. Consider this chain:
Address Format-1 CCW
-------- -----------------
0 33110EC0 346022CC 33177468
1 33110EC8 CF200000 3318300C
CCW[0] moves a little more than two pages, but also has the
Suppress Length Indication (SLI) bit set to handle the expectation
that considerably less data will be moved. CCW[1] also has the SLI
bit set, and has a length of zero. Once vfio-ccw does its magic,
the kernel issues a start subchannel on behalf of the guest with this:
Address Format-1 CCW
-------- -----------------
0 021EDED0 346422CC 021F0000
1 021EDED8 CF240000 3318300C
Both CCWs were converted to an IDAL and have the corresponding flags
set (which is by design), but only the address of the first data
address is converted to something the host is aware of. The second
CCW still has the address used by the guest, which happens to be (A)
(probably) an invalid address for the host, and (B) an invalid IDAW
address (doubleword boundary, etc.).
While the I/O fails, it doesn't fail correctly. In this example, we
would receive a program check for an invalid IDAW address, instead of
a unit check for an invalid command.
To fix this, revert commit 4cebc5d6a6 ("vfio: ccw: validate the
count field of a ccw before pinning") and allow the individual fetch
routines to process them like anything else. We'll make a slight
adjustment to our allocation of the pfn_array (for direct CCWs) or
IDAL (for IDAL CCWs) memory, so that we have room for at least one
address even though no guest memory will be pinned and thus the
IDAW will not be populated with a host address.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190516161403.79053-3-farman@linux.ibm.com>
Acked-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The skip flag of a CCW offers the possibility of data not being
transferred, but is only meaningful for certain commands.
Specifically, it is only applicable for a read, read backward, sense,
or sense ID CCW and will be ignored for any other command code
(SA22-7832-11 page 15-64, and figure 15-30 on page 15-75).
(A sense ID is xE4, while a sense is x04 with possible modifiers in the
upper four bits. So we will cover the whole "family" of sense CCWs.)
For those scenarios, since there is no requirement for the target
address to be valid, we should skip the call to vfio_pin_pages() and
rely on the IDAL address we have allocated/built for the channel
program. The fact that the individual IDAWs within the IDAL are
invalid is fine, since they aren't actually checked in these cases.
Set pa_nr to zero when skipping the pfn_array_pin() call, since it is
defined as the number of pages pinned and is used to determine
whether to call vfio_unpin_pages() upon cleanup.
The pfn_array_pin() routine returns the number of pages that were
pinned, but now might be skipped for some CCWs. Thus we need to
calculate the expected number of pages ourselves such that we are
guaranteed to allocate a reasonable number of IDAWs, which will
provide a valid address in CCW.CDA regardless of whether the IDAWs
are filled in with pinned/translated addresses or not.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190516161403.79053-2-farman@linux.ibm.com>
Acked-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's initialize the host address to something that is invalid,
rather than letting it default to zero. This just makes it easier
to notice when a pin operation has failed or been skipped.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190514234248.36203-5-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The pfn_array_alloc_pin routine is doing too much. Today, it does the
alloc of the pfn_array struct and its member arrays, builds the iova
address lists out of a contiguous piece of guest memory, and asks vfio
to pin the resulting pages.
Let's effectively revert a significant portion of commit 5c1cfb1c39
("vfio: ccw: refactor and improve pfn_array_alloc_pin()") such that we
break pfn_array_alloc_pin() into its component pieces, and have one
routine that allocates/populates the pfn_array structs, and another
that actually pins the memory. In the future, we will be able to
handle scenarios where pinning memory isn't actually appropriate.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190514234248.36203-4-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Per the POPs [1], when processing an interrupt the SCSW.CPA field of an
IRB generally points to 8 bytes after the last CCW that was executed
(there are exceptions, but this is the most common behavior).
In the case of an error, this points us to the first un-executed CCW
in the chain. But in the case of normal I/O, the address points beyond
the end of the chain. While the guest generally only cares about this
when possibly restarting a channel program after error recovery, we
should convert the address even in the good scenario so that we provide
a consistent, valid, response upon I/O completion.
[1] Figure 16-6 in SA22-7832-11. The footnotes in that table also state
that this is true even if the resulting address is invalid or protected,
but moving to the end of the guest chain should not be a surprise.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190514234248.36203-2-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When we get a solicited interrupt, the start function may have
been cleared by a csch, but we still have a channel program
structure allocated. Make it safe to call the cp accessors in
any case, so we can call them unconditionally.
While at it, also make sure that functions called from other parts
of the code return gracefully if the channel program structure
has not been initialized (even though that is a bug in the caller).
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Since we have a little function to see whether a channel
program address falls within a range of CCWs, let's use
it in the other places of code that make these checks.
(Why isn't ccw_head fully removed? Well, because this
way some longs lines don't have to be reflowed.)
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190222183941.29596-3-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The routine ccwchain_calc_length() is tasked with looking at a
channel program, seeing how many CCWs are chained together by
the presence of the Chain-Command flag, and returning a count
to the caller.
Previously, it also considered a Transfer-in-Channel CCW as being
an appropriate mechanism for chaining. The problem at the time
was that the TIC CCW will almost certainly not go to the next CCW
in memory (because the CC flag would be sufficient), and so
advancing to the next 8 bytes will cause us to read potentially
invalid memory. So that comparison was removed, and the target
of the TIC is processed as a new chain.
This is fine when a TIC goes to a new chain (consider a NOP+TIC to
a channel program that is being redriven), but there is another
scenario where this falls apart. A TIC can be used to "rewind"
a channel program, for example to find a particular record on a
disk with various orientation CCWs. In this case, we DO want to
consider the memory after the TIC since the TIC will be skipped
once the requested criteria is met. This is due to the Status
Modifier presented by the device, though software doesn't need to
operate on it beyond understanding the behavior change of how the
channel program is executed.
So to handle this, we will re-introduce the check for a TIC CCW
but limit it by examining the target of the TIC. If the TIC
doesn't go back into the current chain, then current behavior
applies; we should stop counting CCWs and let the target of the
TIC be handled as a new chain. But, if the TIC DOES go back into
the current chain, then we need to keep looking at the memory after
the TIC for when the channel breaks out of the TIC loop. We can't
use tic_target_chain_exists() because the chain in question hasn't
been built yet, so we will redefine that comparison with some small
functions to make it more readable and to permit refactoring later.
Fixes: 405d566f98 ("vfio-ccw: Don't assume there are more ccws after a TIC")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190222183941.29596-2-farman@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When trying to calculate the length of a ccw chain, we assume
there are ccws after a TIC. This can lead to overcounting and
copying garbage data from guest memory.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <d63748c1f1b03147bcbf401596638627a5e35ef7.1548082107.git.alifm@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Direct returns from within a loop are rude, but it doesn't mean it gets
to avoid releasing the memory acquired beforehand.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20181109023937.96105-3-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
If pfn_array_alloc fails somehow, we need to release the pfn_array_table
that was malloc'd earlier.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20181109023937.96105-2-farman@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We have two nested loops to check the entries within the pfn_array_table
arrays. But we mistakenly use the outer array as an index in our check,
and completely ignore the indexing performed by the inner loop.
Cc: stable@vger.kernel.org
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20181002010235.42483-1-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's avoid free on ccw->cda that points to a guest address
or an already freed memory area by setting it to NULL if memory
allocation didn't happen or failed.
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.ibm.com>
Message-Id: <20180523025645.8978-4-bjsdjshi@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This refactors pfn_array_alloc_pin() and also improves it by adding
defensive code in error handling so that calling pfn_array_unpin_free()
after error return won't lead to problem. This mainly does:
1. Merge pfn_array_pin() into pfn_array_alloc_pin(), since there is no
other user of pfn_array_pin(). As a result, also remove kernel-doc
for pfn_array_pin() and add/update kernel-doc for pfn_array_alloc_pin()
and struct pfn_array.
2. For a vfio_pin_pages() failure, set pa->pa_nr to zero to indicate
zero pages were pinned.
3. Set pa->pa_iova_pfn to NULL right after it was freed.
Suggested-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.ibm.com>
Message-Id: <20180523025645.8978-3-bjsdjshi@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The kernel doc description for usage of the struct pfn_array in
pfn_array_pin() is unnecessary long. Let's shorten it by describing
the contents of the struct pfn_array fields at the struct's definition
instead.
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.ibm.com>
Message-Id: <20180523025645.8978-2-bjsdjshi@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
There is at least one relevant guest OS that doesn't set the IDA flags in
the ORB as we would like them, but never uses any IDA. So instead of
saying -EOPNOTSUPP when observing an ORB, such that a channel program
specified by it could be a not supported one, let us say -EOPNOTSUPP only
if the channel program is a not supported one.
Of course, the real solution would be doing proper translation for all
IDA. This is possible, but given the current code not straight forward.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Jason J. Herne <jjherne@linux.ibm.com>
Message-Id: <20180516173342.15174-1-pasic@linux.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
If the translation of a channel program fails, we may end up attempting
to clean up (free, unpin) stuff that never got translated (and allocated,
pinned) in the first place.
By adjusting the lengths of the chains accordingly (so the element that
failed, and all subsequent elements are excluded) cleanup activities
based on false assumptions can be avoided.
Let's make sure cp_free works properly after cp_prefetch returns with an
error by setting ch_len of a ccw chain to the number of the translated
CCWs on that chain.
Cc: stable@vger.kernel.org #v4.12+
Acked-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20180423110113.59385-2-bjsdjshi@linux.vnet.ibm.com>
[CH: fixed typos]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fix the kernel-doc usage in cio to get rid of (W=1) build warnings like:
drivers/s390/cio/cio.c:1068: warning: No description found for parameter 'sch'
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Pull s390 updates from Heiko Carstens:
"Since Martin is on vacation you get the s390 pull request for the
v4.15 merge window this time from me.
Besides a lot of cleanups and bug fixes these are the most important
changes:
- a new regset for runtime instrumentation registers
- hardware accelerated AES-GCM support for the aes_s390 module
- support for the new CEX6S crypto cards
- support for FORTIFY_SOURCE
- addition of missing z13 and new z14 instructions to the in-kernel
disassembler
- generate opcode tables for the in-kernel disassembler out of a
simple text file instead of having to manually maintain those
tables
- fast memset16, memset32 and memset64 implementations
- removal of named saved segment support
- hardware counter support for z14
- queued spinlocks and queued rwlocks implementations for s390
- use the stack_depth tracking feature for s390 BPF JIT
- a new s390_sthyi system call which emulates the sthyi (store
hypervisor information) instruction
- removal of the old KVM virtio transport
- an s390 specific CPU alternatives implementation which is used in
the new spinlock code"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (88 commits)
MAINTAINERS: add virtio-ccw.h to virtio/s390 section
s390/noexec: execute kexec datamover without DAT
s390: fix transactional execution control register handling
s390/bpf: take advantage of stack_depth tracking
s390: simplify transactional execution elf hwcap handling
s390/zcrypt: Rework struct ap_qact_ap_info.
s390/virtio: remove unused header file kvm_virtio.h
s390: avoid undefined behaviour
s390/disassembler: generate opcode tables from text file
s390/disassembler: remove insn_to_mnemonic()
s390/dasd: avoid calling do_gettimeofday()
s390: vfio-ccw: Do not attempt to free no-op, test and tic cda.
s390: remove named saved segment support
s390/archrandom: Reconsider s390 arch random implementation
s390/pci: do not require AIS facility
s390/qdio: sanitize put_indicator
s390/qdio: use atomic_cmpxchg
s390/nmi: avoid using long-displacement facility
s390: pass endianness info to sparse
s390/decompressor: remove informational messages
...
Because we do not make use of the cda (channel data address) for test,
no-op ccws no address translation takes place. This means cda could
contain a guest address which we do not want to attempt to free. Let's
check the command type and skip cda free when it is not needed.
For a TIC ccw, ccw->cda points to either a ccw in an existing chain or
it points to a whole new allocated chain. In either case the data will
be freed when the owning chain is freed.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Message-Id: <1510068152-21988-1-git-send-email-jjherne@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the count field of a ccw is zero, there is no need to
try to pin page(s) for it. Let's check the count value
before starting pinning operations.
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20171011023822.42948-3-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We currently return the same error code (-EFAULT) to indicate two
different error cases:
1. a bug in vfio-ccw implementation has been found.
2. a buggy channel program has been detected.
This brings difficulty for userland program (specifically Qemu) to
handle.
Let's use -EFAULT to only indicate the first case. For the second
case, we simply hand over the ccws to lower level for further
handling.
Notice:
Once a bad idaw address is detected, the current behavior is to
suppress the ssch. With this fix, the channel program will be
accepted, and part of the channel program (the part ahead of
the bad idaw) could possibly be executed by the device before
I/O conclusion.
Suggested-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20171011023822.42948-2-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When we are translating channel data addresses from guest to host
address space for TIC instructions we are getting incorrect
addresses because of a pointer arithmetic error.
We currently calculate the offset of the TIC's cda from the start
of the channel program chain (ccw->cda - ccw_head). We then add
that to the address of the ccw chain in host memory (iter->ch_ccw).
The problem is that iter->ch_ccw is a pointer to struct ccw1 so
when we increment it we are actually incrementing by the size of
struct ccw1 which is 8 bytes. The intent was to increment by
n-bytes, not n*8.
The fix: cast iter->ch_ccw to char* so it will be incremented by
n*1.
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170721011436.76112-1-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Although Linux does not use format-0 channel command words (CCW0)
these are a non-optional part of the platform spec, and for the sake
of platform compliance, and possibly some non-Linux guests, we have
to support CCW0.
Making the kernel execute a format 0 channel program is too much hassle
because we would need to allocate and use memory which can be addressed
by 24 bit physical addresses (because of CCW0.cda). So we implement CCW0
support by translating the channel program into an equivalent CCW1
program instead.
Based upon an orginal patch by Kai Yue Wang.
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170317031743.40128-16-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Introduce ccwchain structure and helper functions that can be used to
handle a channel program issued from a virtual machine.
The following limitations apply:
1. Supports only prefetch enabled mode.
2. Supports idal(c64) ccw chaining.
3. Supports 4k idaw.
4. Supports ccw1.
5. Supports direct ccw chaining by translating them to idal ccws.
CCW translation requires to leverage the vfio_(un)pin_pages interfaces
to pin/unpin sets of mem pages frequently. Currently we have a lack of
support to do this in an efficient way. So we introduce pfn_array data
structure and helper functions to handle pin/unpin operations here.
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170317031743.40128-6-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Jared Rossi