Commit Graph

1332 Commits

Author SHA1 Message Date
Dan Carpenter bd0b5a35aa media: sr030pc30: prevent array underflow in try_fmt()
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 08:20:22 -05:00
Mauro Carvalho Chehab 76bf7087fb Merge commit 'v4.16-rc4~0' into patchwork
* commit 'v4.16-rc4~0': (900 commits)
  Linux 4.16-rc4
  memremap: fix softlockup reports at teardown
  libnvdimm: re-enable deep flush for pmem devices via fsync()
  MAINTAINERS: take over Kconfig maintainership
  vfio: disable filesystem-dax page pinning
  kconfig: fix line number in recursive inclusion error message
  Coccinelle: memdup: Fix typo in warning messages
  i2c: octeon: Prevent error message on bus error
  parisc: Reduce irq overhead when run in qemu
  parisc: Use cr16 interval timers unconditionally on qemu
  parisc: Check if secondary CPUs want own PDC calls
  parisc: Hide virtual kernel memory layout
  parisc: Fix ordering of cache and TLB flushes
  kconfig: Update ncurses package names for menuconfig
  kbuild/kallsyms: trivial typo fix
  kbuild: test --build-id linker flag by ld-option instead of cc-ldoption
  kbuild: drop superfluous GCC_PLUGINS_CFLAGS assignment
  kconfig: Don't leak choice names during parsing
  sh: fix build error for empty CONFIG_BUILTIN_DTB_SOURCE
  kconfig: set SYMBOL_AUTO to the symbol marked with defconfig_list
  ...
2018-03-05 07:39:06 -05:00
Arnd Bergmann 15ea2df914 media: ov2685: mark PM functions as __maybe_unused
Without CONFIG_PM, we get a harmless build warning:

drivers/media/i2c/ov2685.c:516:12: error: 'ov2685_runtime_suspend' defined but not used [-Werror=unused-function]
 static int ov2685_runtime_suspend(struct device *dev)
            ^~~~~~~~~~~~~~~~~~~~~~
drivers/media/i2c/ov2685.c:507:12: error: 'ov2685_runtime_resume' defined but not used [-Werror=unused-function]
 static int ov2685_runtime_resume(struct device *dev)

This marks the affected functions as __maybe_unused.

Fixes: e3861d9118 ("media: ov2685: add support for OV2685 sensor")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[hans.verkuil@cisco.com: fixed typo in Subject: was ov5695]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26 10:38:56 -05:00
Arnd Bergmann 94d4a1a671 media: ov5695: mark PM functions as __maybe_unused
Without CONFIG_PM, we get a harmless build warning:

drivers/media/i2c/ov5695.c:1033:12: error: 'ov5695_runtime_suspend' defined but not used [-Werror=unused-function]
 static int ov5695_runtime_suspend(struct device *dev)
            ^~~~~~~~~~~~~~~~~~~~~~
drivers/media/i2c/ov5695.c:1024:12: error: 'ov5695_runtime_resume' defined but not used [-Werror=unused-function]
 static int ov5695_runtime_resume(struct device *dev)

This marks the affected functions as __maybe_unused.

Fixes: 8a77009be4 ("media: ov5695: add support for OV5695 sensor")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26 10:38:39 -05:00
Arnd Bergmann 15001033f4 media: i2c: TDA1997x: add CONFIG_SND dependency
Without CONFIG_SND, we get a link error:

ERROR: "snd_soc_register_codec" [drivers/media/i2c/tda1997x.ko] undefined!
ERROR: "snd_soc_unregister_codec" [drivers/media/i2c/tda1997x.ko] undefined!
ERROR: "snd_pcm_hw_constraint_minmax" [drivers/media/i2c/tda1997x.ko] undefined!

This adds the same Kconfig dependency that we have in other
media drivers, using 'select SND_PCM' to ensure that we have
can call snd_pcm_hw_constraint_minmax, while depending on
CONFIG_SND_SOC for registering the codec.

Fixes: 9ac0038db9 ("media: i2c: Add TDA1997x HDMI receiver driver")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26 10:38:14 -05:00
Kieran Bingham e0019f7101 media: i2c: adv748x: Fix cleanup jump on chip identification
The error handling for the adv748x_identify_chip() call erroneously
jumps to the err_cleanup_clients label before the clients have been
established.

Correct this by jumping to the next (and correct) label in the cleanup
code: err_cleanup_dt.

Fixes: 3e89586a64 ("media: i2c: adv748x: add adv748x driver")

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26 10:30:15 -05:00
Mauro Carvalho Chehab 876e32e5dd media: tw9910: solve coding style issues
As we're adding this as a new driver, make checkpatch happier by
solving several style issues, using --fix-inplace at strict mode.

Some issues required manual work.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26 09:25:26 -05:00
Mauro Carvalho Chehab 054d8830ac media: ov772x: fix whitespace issues
As we're adding this as a new driver, make checkpatch happier by
solving some whitespace issues, using --fix-inplace.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26 09:25:01 -05:00
Jacopo Mondi 7b20f325a5 media: i2c: tw9910: Remove soc_camera dependencies
Remove soc_camera framework dependencies from tw9910 sensor driver.
- Handle clock and gpios
- Register async subdevice
- Remove soc_camera specific g/s_mbus_config operations
- Add kernel doc to driver interface header file
- Adjust build system

This commit does not remove the original soc_camera based driver as long
as other platforms depends on soc_camera-based CEU driver.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26 09:14:53 -05:00
Jacopo Mondi e0d76c3842 media: i2c: Copy tw9910 soc_camera sensor driver
Copy the soc_camera based driver in v4l2 sensor driver directory.
This commit just copies the original file without modifying it.
No modification to KConfig and Makefile as soc_camera framework
dependencies need to be removed first in next commit.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26 09:14:07 -05:00
Jacopo Mondi 350894918e media: i2c: ov772x: Support frame interval handling
Add support to ov772x driver for frame intervals handling and enumeration.
Tested with 10MHz and 24MHz input clock at VGA and QVGA resolutions for
10, 15 and 30 frame per second rates.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26 09:12:43 -05:00
Jacopo Mondi 762c28121d media: i2c: ov772x: Remove soc_camera dependencies
Remove soc_camera framework dependencies from ov772x sensor driver.
- Handle clock and gpios
- Register async subdevice
- Remove soc_camera specific g/s_mbus_config operations
- Change image format colorspace from JPEG to SRGB as the two use the
  same colorspace information but JPEG makes assumptions on color
  components quantization that do not apply to the sensor
- Remove sizes crop from get_selection as driver can't scale
- Add kernel doc to driver interface header file
- Adjust build system

This commit does not remove the original soc_camera based driver as long
as other platforms depends on soc_camera-based CEU driver.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26 09:11:16 -05:00
Jacopo Mondi 1112babde2 media: i2c: Copy ov772x soc_camera sensor driver
Copy the soc_camera based driver in v4l2 sensor driver directory.
This commit just copies the original file without modifying it.
No modification to KConfig and Makefile as soc_camera framework
dependencies need to be removed first in next commit.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26 09:10:12 -05:00
Mauro Carvalho Chehab 225fe212a2 media: tvp541x: fix some kernel-doc parameters
Solve the following warnings:
  + drivers/media/i2c/tvp514x.c: warning: Excess function parameter 'a' description in 'tvp514x_g_frame_interval':  => 759
  + drivers/media/i2c/tvp514x.c: warning: Excess function parameter 'a' description in 'tvp514x_s_frame_interval':  => 784
  + drivers/media/i2c/tvp514x.c: warning: Function parameter or member 'ival' not described in 'tvp514x_g_frame_interval':  => 759
  + drivers/media/i2c/tvp514x.c: warning: Function parameter or member 'ival' not described in 'tvp514x_s_frame_interval':  => 784

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26 08:31:28 -05:00
Mauro Carvalho Chehab 00d9da5025 media: ov7740: remove an unused var
Fix this warning regression:
   drivers/media/i2c/ov7740.c: warning: variable 'ret' set but not used [-Wunused-but-set-variable]:  => 276:6

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26 08:30:08 -05:00
Kieran Bingham 9f564184e6 media: i2c: adv748x: fix HDMI field heights
The ADV748x handles interlaced media using V4L2_FIELD_ALTERNATE field
types.  The correct specification for the height on the mbus is the
image height, in this instance, the field height.

The AFE component already correctly adjusts the height on the mbus, but
the HDMI component got left behind.

Adjust the mbus height to correctly describe the image height of the
fields when processing interlaced video for HDMI pipelines.

Fixes: 3e89586a64 ("media: i2c: adv748x: add adv748x driver")

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26 08:16:59 -05:00
Gustavo A. R. Silva a2603d1748 media: i2c: max2175: use 64-bit arithmetic instead of 32-bit
Add suffix LL to constant 2 in order to give the compiler complete
information about the proper arithmetic to use. Notice that this
constant is used in a context that expects an expression of type
s64 (64 bits, signed).

The expression 2 * (clock_rate - abs_nco_freq) is currently being
evaluated using 32-bit arithmetic.

Addresses-Coverity-ID: 1446589 ("Unintentional integer overflow")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26 08:08:15 -05:00
Mauro Carvalho Chehab 3dd6b560dc media: Don't let tvp5150_get_vbi() go out of vbi_ram_default array
As pointed by Dan, possible values for bits[3:0] of te Line Mode Registers
can range from 0x0 to 0xf, but the check logic allow values ranging
from 0x0 to 0xe.

As static arrays are initialized with zero, using a value without
an explicit initializer at the array won't cause any harm.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 11:44:09 -05:00
Mauro Carvalho Chehab a7bc5773cd ov13858: fix endiannes warnings
3 warning regressions:
  + drivers/media/i2c/ov13858.c: warning: cast to restricted __be32:  => 1093:16
  + drivers/media/i2c/ov13858.c: warning: incorrect type in assignment (different base types):  => 1111:13
  + drivers/media/i2c/ov13858.c: warning: incorrect type in initializer (different base types):  => 1071:27

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 03:21:27 -05:00
Hugues Fruchet 3b49842400 media: ov5640: fix framerate update
After a framerate update through s_frame_interval(), the new
framerate was not taken into account when streaming,
but was taken into account on next session.
This was due to sensor->current_mode not updated accordingly to new
framerate setting in ov5640_s_frame_interval().

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 03:14:12 -05:00
Hugues Fruchet 8670d70a42 media: ov5640: fix virtual_channel parameter permissions
Fix module_param(virtual_channel) permissions.
This problem was detected by checkpatch:
$ scripts/checkpatch.pl -f drivers/media/i2c/ov5640.c
ERROR: Use 4 digit octal (0777) not decimal permissions
+module_param(virtual_channel, int, 0);

Also add an error trace in case of virtual_channel not in
the valid range of values.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 03:12:19 -05:00
Hugues Fruchet 41d8d7f517 media: ov5640: various typo & style fixes
Various typo & style fixes either detected by code
review or checkpatch.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 03:10:47 -05:00
Hugues Fruchet 3924c62383 media: ov5640: add error trace in case of i2c read failure
Add an error trace in ov5640_read_reg() in case of i2c_transfer()
failure.
Uniformize error traces using dev_err instead v4l2_err.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 03:08:14 -05:00
Hugues Fruchet d47c412639 media: ov5640: add JPEG support
Add YUV422 encoded JPEG support.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 03:07:10 -05:00
Jacopo Mondi 01b8444828 media: v4l2: i2c: ov7670: Implement OF mbus configuration
ov7670 driver supports two optional properties supplied through platform
data, but currently does not support any standard video interface
property.

Add support through OF parsing for 2 generic properties (vsync and hsync
polarities) and for one custom property already supported through
platform data to suppress pixel clock output during horizontal
blanking.

While at there, check return value of register writes in set_fmt
function and rationalize spacings.

Signal polarities and pixel clock blanking verified through scope and
image capture.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 03:05:51 -05:00
Gustavo A. R. Silva 36e49ffb97 media: i2c: ov9650: fix potential integer overflow in __ov965x_set_frame_interval
Cast fi->interval.numerator to u64 in order to avoid a potential integer
overflow. This variable is being used in a context that expects an
expression of type u64.

Addresses-Coverity-ID: 1324146 ("Unintentional integer overflow")
[Sakari Ailus: use do_div() to make this work on 32-bit systems]

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 03:03:32 -05:00
Akinobu Mita b1f5d0ae93 media: ov9650: support device tree probing
The ov9650 driver currently only supports legacy platform data probe.
This change adds device tree probing.

There has been an attempt to add device tree support for ov9650 driver
by Hugues Fruchet as a part of the patchset that adds support of OV9655
camera (http://www.spinics.net/lists/linux-media/msg117903.html), but
it wasn't merged into mainline because creating a separate driver for
OV9655 is preferred.

This is very similar to Hugues's patch, but not supporting new device.

Cc: Jacopo Mondi <jacopo@jmondi.org>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Hugues Fruchet <hugues.fruchet@st.com>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Rob Herring <robh@kernel.org>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 03:02:19 -05:00
Gustavo A. R. Silva f4b32c292a media: ov13858: Use false for boolean value
Assign true or false to boolean variables instead of an integer value.

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 02:51:35 -05:00
Chiranjeevi Rapolu d365bc9247 media: ov13858: Avoid possible null first frame
Previously, the sensor, with default settings, was outputting SOF without
data. This results in frame sync error on the receiver side.

Now, configure the sensor to output SOF with MIPI data for all frames. This
avoids possible null first frame on the bus.

Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Tianshu Qiu <tian.shu.qiu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 02:49:50 -05:00
Sakari Ailus c723001f3b media: ov2685: Assign ret in default case in s_ctrl callback
Assign ret in the default case for s_ctrl callback. This can't happen but
still may result in compiler warnings.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 02:45:48 -05:00
Shunqian Zheng e3861d9118 media: ov2685: add support for OV2685 sensor
This patch adds driver for Omnivision's ov2685 sensor.
Though the ov2685 can output yuv data, this driver only
supports the raw bayer format, including the following features:
  - output 1600x1200 at 30fps
  - test patterns
  - manual exposure/gain control
  - vblank and hblank
  - media controller
  - runtime pm

[Sakari Ailus: trivial: ov5695_of_match -> ov2685_of_match]

Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 02:44:51 -05:00
Shunqian Zheng 8a77009be4 media: ov5695: add support for OV5695 sensor
This patch adds driver for Omnivision's ov5695 sensor,
the driver supports following features:
 - supported resolutions
   + 2592x1944 at 30fps
   + 1920x1080 at 30fps
   + 1296x972 at 60fps
   + 1280x720 at 30fps
   + 640x480 at 120fps
 - test patterns
 - manual exposure/gain(analog and digital) control
 - vblank and hblank
 - media controller
 - runtime pm

Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 02:40:02 -05:00
Hans Verkuil 40de44bbe0 media: mt9t031: deprecate, move to staging
This driver is unused and depends on the deprecated soc-camera framework.
Move it to staging in preparation for being removed unless someone does
the work to convert it to a proper V4L2 subdev driver.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 02:31:38 -05:00
Hans Verkuil 0f966bec71 media: imx074: deprecate, move to staging
This driver is unused and depends on the deprecated soc-camera framework.
Move it to staging in preparation for being removed unless someone does
the work to convert it to a proper V4L2 subdev driver.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23 02:30:26 -05:00
Mauro Carvalho Chehab 4395fb475a tda1997x: get rid of an unused var
1 warning regressions:
  + drivers/media/i2c/tda1997x.c: warning: variable 'last_irq_status' set but not used [-Wunused-but-set-variable]:  => 1421:17

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-22 12:54:28 -05:00
Tim Harvey 9ac0038db9 media: i2c: Add TDA1997x HDMI receiver driver
Add support for the TDA1997x HDMI receivers.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[hans.verkuil@cisco.com: fix type 'testin' -> 'testing']
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-22 12:53:32 -05:00
Hans Verkuil 4471109e38 media: convert g/s_parm to g/s_frame_interval in subdevs
Convert all g/s_parm calls to g/s_frame_interval. This allows us
to remove the g/s_parm ops since those are a duplicate of
g/s_frame_interval.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-22 12:27:35 -05:00
Al Viro 37b3c6a640 [poll] annotate SAA6588_CMD_POLL users
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-02-15 13:11:48 -05:00
Hans Verkuil 55e5927eb1 media: i2c: add SPDX license info
Replace the old license information with the corresponding SPDX
license for those drivers Cisco authored.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-14 13:16:31 -05:00
Linus Torvalds a9a08845e9 vfs: do bulk POLL* -> EPOLL* replacement
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.

Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-11 14:34:03 -08:00
Arnd Bergmann 4852fdca88 media: i2c: ov7740: use gpio/consumer.h instead of gpio.h
When built on a platform without gpiolib support, we run into
a couple of compile errors in ov7740, including:

drivers/media/i2c/ov7740.c: In function 'ov7740_set_power':
drivers/media/i2c/ov7740.c:307:4: error: implicit declaration of function 'gpiod_direction_output'; did you mean 'gpio_direction_output'? [-Werror=implicit-function-declaration]
    gpiod_direction_output(ov7740->pwdn_gpio, 0);
drivers/media/i2c/ov7740.c:914:4: error: 'GPIOD_OUT_HIGH' undeclared (first use in this function); did you mean 'GPIOF_INIT_HIGH'?

Changing it to use the correct header file solves the problem.

Fixes: 39c5c4471b ("media: i2c: Add the ov7740 image sensor driver")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-23 08:13:02 -05:00
Sakari Ailus 3580112b6d media: entity: Add a nop variant of media_entity_cleanup
Add nop variant of media_entity_cleanup. This allows calling
media_entity_cleanup whether or not Media controller is enabled,
simplifying driver code.

Also drop #ifdefs on a few drivers around media_entity_cleanup().

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-23 08:12:01 -05:00
Hugues Fruchet 6146fde355 media: ov5640: fix spurious streamon failures
Time to time, stream on is failing with a strange positive error.
Error code is returned erroneously by ov5640_set_ctrl_exposure()
due to ov5640_get_vts() return value wrongly treated as error.
Fix this by forcing ret to 0 after ov5640_get_vts() success call,
in order that ret is set to success for rest of code sequence.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-23 08:10:31 -05:00
Mauro Carvalho Chehab a4a02b6ec3 media: dw9714: annotate a __be16 integer value
As warned:
   drivers/media/i2c/dw9714.c: warning: incorrect type in initializer (different base types):  => 64:19

Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-23 08:04:51 -05:00
Sakari Ailus a69e99723f media: dw9714: Remove client field in driver's struct
The client field in driver's struct is redundant. Remove it.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-23 07:44:45 -05:00
Sakari Ailus fa4293346b media: dw9714: Call pm_runtime_idle() at the end of probe()
Call pm_runtime_idle() at the end of the driver's probe() function to
enable the device to reach low power state once probe() finishes.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-23 07:44:01 -05:00
Hugues Fruchet e3ee691dbf media: ov5640: add support of RGB565 and YUYV formats
Add RGB565 (LE & BE) and YUV422 YUYV format in addition
to existing YUV422 UYVY format.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-05 12:54:14 -05:00
Hugues Fruchet f22996db44 media: ov5640: add support of DVP parallel interface
Add support of DVP parallel mode in addition of
existing MIPI CSI mode. The choice between two modes
and configuration is made through device tree.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-05 12:53:21 -05:00
Hugues Fruchet 0f7acb5291 media: ov5640: check chip id
Verify that chip identifier is correct when probing.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-05 12:52:21 -05:00
Hugues Fruchet 1fddc5da9e media: ov5640: switch to gpiod_set_value_cansleep()
Switch gpiod_set_value to gpiod_set_value_cansleep to avoid
warnings when powering sensor.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-05 12:51:55 -05:00
Akinobu Mita 74e08739c0 media: mt9m111: add V4L2_CID_TEST_PATTERN control
The mt9m111 has the test pattern generator features.  This makes use of
it through V4L2_CID_TEST_PATTERN control.

Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-05 12:51:36 -05:00
Akinobu Mita 90411ce434 media: mt9m111: add media controller support
Create a source pad and set the media controller type to the sensor.

Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-05 12:50:56 -05:00
Akinobu Mita 5ed8c2248e media: mt9m111: create subdevice device node
Set the V4L2_SUBDEV_FL_HAS_DEVNODE flag for the subdevice so that the
subdevice device node is created.

Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-05 12:50:24 -05:00
Wenyou Yang 39c5c4471b media: i2c: Add the ov7740 image sensor driver
The ov7740 (color) image sensor is a high performance VGA CMOS
image snesor, which supports for output formats: RAW RGB and YUV
and image sizes: VGA, and QVGA, CIF and any size smaller.

Signed-off-by: Songjun Wu <songjun.wu@microchip.com>
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-05 12:49:51 -05:00
Dan Carpenter 021741ad36 media: imx274: Silence uninitialized variable warning
Smatch complains that "err" can be uninitialized if we have a zero size
write.  The flow analysis is a little complicated so I'm not sure if
that's possible or not, but it's harmless to set this to zero and it
makes the code easier to read.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-05 12:47:07 -05:00
Mauro Carvalho Chehab 6e6a8b5a38 media: replace all <spaces><tab> occurrences
There are a lot of places where sequences of space/tabs are
found. Get rid of all spaces before tabs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-04 13:15:05 -05:00
Mauro Carvalho Chehab 4a3fad709b media: fix usage of whitespaces and on indentation
On several places, whitespaces are being used for indentation,
or even at the end of the line.

Fix them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-04 13:12:01 -05:00
Sakari Ailus f6e8fe94da media: i2c: as3645a: Remove driver
Remove the V4L2 AS3645A sub-device driver in favour of the LED flash class
driver for the same hardware, drivers/leds/leds-as3645a.c. The latter uses
the V4L2 flash LED class framework to provide V4L2 sub-device interface.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-29 06:31:31 -05:00
Mauro Carvalho Chehab ada795551a media: don't include drivers/media/i2c at cflags
Most of the I2C headers got moved a long time ago to
include/media/i2c. Stop including them at the patch.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-28 14:14:09 -05:00
Mauro Carvalho Chehab 4eb2f55728 media: v4l2-subdev: better document IO pin configuration flags
Convert V4L2_SUBDEV_IO_PIN_* to enums, use BIT() and document
via kernel-doc.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-18 14:14:29 -05:00
Mauro Carvalho Chehab 1ac051631a media: get rid of i2c-addr.h
In the past, the same I2C address were used on multiple places.
After I2C rebinding changes, this is no longer needed. So, we
can just get rid of this header, placing the I2C address where
they belong, e. g. either at bttv driver or at tvtuner.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-18 11:52:24 -05:00
Sean Young 1cb26030f3 media: i2c: enable i2c IR for hardware which isn't HD-PVR
This is a fix for commit 329d88da4d ("[media] media: i2c: Don't export
ir-kbd-i2c module alias") that stopped the module from being loaded
automagically.

The problems described only affect the HD-PVR, so it should not affect
other hardware; also if the module happens to be loaded, the i2c IR
part of the HD-PVR will be enabled anyway.

Fixes: 329d88da4d ("[media] media: i2c: Don't export ir-kbd-i2c module alias")

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-14 09:58:20 -05:00
Sean Young acaa34bf06 media: rc: implement zilog transmitter
This code implements the transmitter which is currently implemented
in the staging lirc_zilog driver.

The new code does not need a signal database, iow. the
haup-ir-blaster.bin firmware file is no longer needed, and the driver
does not know anything about the keycodes in that file.

Instead, the new driver can send raw IR, but the hardware is limited
to few different lengths of pulse and spaces, so it is best to use
generated IR rather than recorded IR.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-14 09:58:20 -05:00
Sean Young ab5222ed16 media: merge ir_tx_z8f0811_haup and ir_rx_z8f0811_haup i2c devices
These two devices ids are really just one device with multiple
addresses. Probing becomes much simpler if we simply fold this into
one i2c device with two address.

Note that this breaks the lirc_zilog driver, however we will teach
ir-kbd-i2c to do what lirc_zilog does in a later commit.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-14 09:58:20 -05:00
Sean Young a6927d81c0 media: rc: i2c: only poll if the rc device is opened
The lirc_zilog driver only polls the device if the lirc chardev
is opened; do the same with the rc-core driver.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-14 09:58:19 -05:00
Sean Young 50a762b413 media: rc: i2c: use dev_dbg rather hand-rolled debug
Use the dev_dbg dynamic infrastructure instead of rolling our own custom
debug logic.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-14 09:58:19 -05:00
Sean Young afc7f24c01 media: rc: i2c: set parent of rc device and improve name
With the parent set for the rc device, the messages clearly state
that it is attached via i2c. The additional printk is unnecessary.

These are the old messages:

rc rc1: i2c IR (Hauppauge WinTV PVR-150 as /devices/virtual/rc/rc1
ir-kbd-i2c: i2c IR (Hauppauge WinTV PVR-150 detected at i2c-10/10-0071/ir0 [ivtv i2c driver #0]

Now we simply get:

rc rc1: Hauppauge WinTV PVR-150 as /devices/pci0000:00/0000:00:1e.0/0000:02:00.0/i2c-10/10-0071/rc/rc1

Note that we no longer copy the name. I've checked all call sites
to verfiy this is not a problem.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-14 09:58:19 -05:00
Mauro Carvalho Chehab 29236349aa media: ov9650: fix bogus warnings
The smatch logic gets confused with the syntax used to check if the
ov9650x_read() reads succedded:
	drivers/media/i2c/ov9650.c:895 __g_volatile_ctrl() error: uninitialized symbol 'reg2'.
	drivers/media/i2c/ov9650.c:895 __g_volatile_ctrl() error: uninitialized symbol 'reg1'.

There's nothing wrong with the original logic, except that
it is a little more harder to review.

So, let's stick with the syntax that won't cause read
issues.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reviewed-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:04:55 -05:00
Mauro Carvalho Chehab 00b4bac78f media: imx274: don't randomly return if range_count is zero
As smatch reported:
	drivers/media/i2c/imx274.c:659 imx274_regmap_util_write_table_8() error: uninitialized symbol 'err'.

There is a bug at imx274_regmap_util_write_table_8() with causes
it to randomly return a random error if range_count is zero.

Worse than that, the logic there starts with range_count
equal to zero, and periodically resets it to zero again.

As it is a way more likely that err assumes a non-zero value,
I suspect that the chance of this code to run is very small,
so, it would be worth to review the entire function.

Anyway, clearly it shouldn't be returning error if range_count
is zero. So, let's fix it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:04:53 -05:00
Maciej S. Szmigiero 4f1bdf0a75 media: cx25840: fix a possible divide by zero in set_fmt callback
If set_fmt callback is called with format->width or format->height set to
zero and HACTIVE_CNT or VACTIVE_CNT bits (respectively) in chip are zero
we will divide by zero later in this callback when we try to calculate
HSC or VSC values.

Fix this by explicitly rejecting these values.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:04:33 -05:00
Maciej S. Szmigiero 7ff0613033 media: cx25840: describe standard for 0b1100 value in AFD_FMT_STAT bits
A 0b1100 value in 4 LSBs of "General Status 1" register (AFD_FMT_STAT) has
known meaning for CX2584x-series chips - it means that a SECAM signal is
currently detected by the chip.

Use this opportunity to also fix wrong binary values that were present
as comments attached to some entries in an array where
chip register -> V4L2 standard mappings are stored.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:04:32 -05:00
Mauro Carvalho Chehab 459ee17c56 media: i2c: add SPDX identifiers to the code I wrote
As we're now using SPDX identifiers, on the several
media drivers I wrote, add the proper SPDX, identifying
the license I meant.

As we're now using the short license, it doesn't make sense to
keep the original license text.

Also, fix MODULE_LICENSE to properly identify GPL v2.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 07:43:36 -05:00
Geert Uytterhoeven 0ff6c131c8 media: i2c: adv748x: Restore full DT paths in kernel messages
As of_node_full_name() now returns only the basename, the endpoint
information printed became useless:

    adv748x 4-0070: Endpoint endpoint on port 7
    adv748x 4-0070: Endpoint endpoint on port 8
    adv748x 4-0070: Endpoint endpoint on port 10
    adv748x 4-0070: Endpoint endpoint on port 11

Restore the old behavior by using "%pOF" instead:

    adv748x 4-0070: Endpoint /soc/i2c@e66d8000/video-receiver@70/port@7/endpoint on port 7
    adv748x 4-0070: Endpoint /soc/i2c@e66d8000/video-receiver@70/port@8/endpoint on port 8
    adv748x 4-0070: Endpoint /soc/i2c@e66d8000/video-receiver@70/port@10/endpoint on port 10
    adv748x 4-0070: Endpoint /soc/i2c@e66d8000/video-receiver@70/port@11/endpoint on port 11

Fixes: a7e4cfb0a7 ("of/fdt: only store the device node basename in full_name")

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:27:46 -05:00
Hans Verkuil 979d33d3a7 media: adv7604.c: add missing return
A 'return' was missing when detecting Arbitration Lost and
calling transmit_done. With the return transmit_done could be
called a second time, confusing the CEC framework. Luckily
the Arbitration Lost condition is very rare.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:39:17 -05:00
Andy Shevchenko 5195978fcb media: i2c: adv748x: Remove duplicate NULL check
Since i2c_unregister_device() became NULL-aware we may remove duplicate
NULL check.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:13:06 -05:00
Andy Shevchenko 297aca189f media: adv7180: Remove duplicate checks
Since i2c_unregister_device() became NULL-aware we may remove duplicate checks.

Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:12:45 -05:00
Kieran Bingham b0fe777884 media: i2c: adv748x: Store the pixel rate ctrl on CSI objects
The current implementation has to search the list of controls for the
pixel rate control, each time it is set.  This can be optimised easily
by storing the ctrl pointer in the CSI/TX object, and referencing that
directly.

While at it, fix up a missing blank line also highlighted in review
comments.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:03:00 -05:00
Alexey Khoroshilov 7df66d7783 media: v4l: mt9v032: Disable clock on error paths
mt9v032_power_on() leaves clk enabled in case of errors,
but it is not expected by its callers.
There is a similar problem in mt9v032_registered().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 09:24:01 -05:00
Akinobu Mita b48d908d2b media: ov7670: add V4L2_CID_TEST_PATTERN control
The ov7670 has the test pattern generator features.  This makes use of
it through V4L2_CID_TEST_PATTERN control.

Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 09:23:12 -05:00
Akinobu Mita 344aa836e8 media: ov7670: use v4l2_async_unregister_subdev()
The sub-device for ov7670 is registered by v4l2_async_register_subdev().
So it should be unregistered by v4l2_async_unregister_subdev() instead of
v4l2_device_unregister_subdev().

Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 09:22:03 -05:00
Sakari Ailus 781b045bae media: imx274: Fix error handling, add MAINTAINERS entry
Add the missing MAINTAINERS entry for imx274, fix error handling in driver
probe and unregister the correct control handler in driver remove.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:45:12 -05:00
Arnd Bergmann 2aa4d4985f media: et8ek8: select V4L2_FWNODE
v4l2_async_register_subdev_sensor_common() is only provided when
CONFIG_V4L2_FWNODE is enabled, otherwise we get a link failure:

drivers/media/i2c/et8ek8/et8ek8_driver.o: In function `et8ek8_probe':
et8ek8_driver.c:(.text+0x884): undefined reference to `v4l2_async_register_subdev_sensor_common'

This adds a Kconfig 'select' statement like all the other users of
this interface have.

Fixes: d8932f38c1 ("media: et8ek8: Add support for flash and lens devices")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:42:19 -05:00
Sakari Ailus fce8ba670b media: ov13858: Select V4L2_FWNODE
The ov13858 driver depends on the V4L2 fwnode, thus add that to Kconfig.

Fixes: 5fcf092e0c ("[media] ov13858: add support for OV13858 sensor")

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:41:58 -05:00
Mauro Carvalho Chehab cba862dc73 media: drivers: remove "/**" from non-kernel-doc comments
Several comments are wrongly tagged as kernel-doc, causing
those warnings:

  drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'irq'
  drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'data'
  drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'solo_dev'
  drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'ch'
  drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'qp'
  drivers/media/usb/pwc/pwc-dec23.c:652: warning: Cannot understand  *
   on line 652 - I thought it was a doc line
  drivers/media/usb/dvb-usb/cinergyT2-fe.c:40: warning: No description found for parameter 'op'
  drivers/media/usb/dvb-usb/friio-fe.c:301: warning: Cannot understand  * (reg, val) commad list to initialize this module.
   on line 301 - I thought it was a doc line
  drivers/media/rc/streamzap.c:201: warning: No description found for parameter 'urb'
  drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'intf'
  drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'id'
  drivers/media/rc/streamzap.c:464: warning: No description found for parameter 'interface'
  drivers/media/i2c/ov5647.c:432: warning: Cannot understand  * @short Subdev core operations registration
   on line 432 - I thought it was a doc line
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'd'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'addr'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wbuf'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wlen'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rbuf'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rlen'
  drivers/media/platform/vim2m.c:350: warning: No description found for parameter 'priv'
  drivers/media/dvb-frontends/tua6100.c:34: warning: cannot understand function prototype: 'struct tua6100_priv '
  drivers/media/platform/sti/hva/hva-h264.c:140: warning: cannot understand function prototype: 'struct hva_h264_stereo_video_sei '
  drivers/media/platform/sti/hva/hva-h264.c:150: warning: Cannot understand  * @frame_width: width in pixels of the buffer containing the input frame
   on line 150 - I thought it was a doc line
  drivers/media/platform/sti/hva/hva-h264.c:356: warning: Cannot understand  * @ slice_size: slice size
   on line 356 - I thought it was a doc line
  drivers/media/platform/sti/hva/hva-h264.c:369: warning: Cannot understand  * @ bitstream_size: bitstream size
   on line 369 - I thought it was a doc line
  drivers/media/platform/sti/hva/hva-h264.c:395: warning: Cannot understand  * @seq_info:  sequence information buffer
   on line 395 - I thought it was a doc line
  drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fe'
  drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fw'
  drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'n'
  drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'd'
  drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_i'
  drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_f'
  drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:83: warning: cannot understand function prototype: 'struct ttusb '
  drivers/media/platform/sh_veu.c:277: warning: No description found for parameter 'priv'
  drivers/media/dvb-frontends/zl10036.c:33: warning: cannot understand function prototype: 'int zl10036_debug; '
  drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'state'
  drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'frequency'
  drivers/media/platform/rcar_fdp1.c:1139: warning: No description found for parameter 'priv'
  drivers/media/platform/ti-vpe/vpe.c:933: warning: No description found for parameter 'priv'
  drivers/media/usb/gspca/ov519.c:36: warning: No description found for parameter 'fmt'
  drivers/media/usb/dvb-usb/dib0700_devices.c:3367: warning: No description found for parameter 'adap'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:19:03 -05:00
Mauro Carvalho Chehab ed050c2180 media: lm3560: add a missing kernel-doc parameter
Fix this warning:
	drivers/media/i2c/lm3560.c:69: warning: No description found for parameter 'dev'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:19:03 -05:00
Mauro Carvalho Chehab c5bb831854 media: tvp514x: fix kernel-doc parameters
There are some struct fields that aren't documented, and some
consts whose comments start with /**, but they aren't kernel-doc
annotations. So, fix it:

  drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'hdl'
  drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'pad'
  drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'format'
  drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'int_seq'
  drivers/media/i2c/tvp514x.c:219: warning: cannot understand function prototype: 'const struct v4l2_fmtdesc tvp514x_fmt_list[] = '
  drivers/media/i2c/tvp514x.c:235: warning: cannot understand function prototype: 'const struct tvp514x_std_info tvp514x_std_list[] = '
  drivers/media/i2c/tvp514x.c:941: warning: No description found for parameter 'fmt'
  drivers/media/i2c/tvp514x.c:941: warning: Excess function parameter 'format' description in 'tvp514x_set_pad_format'
  drivers/media/i2c/tvp514x.c:1208: warning: cannot understand function prototype: 'const struct i2c_device_id tvp514x_id[] = '

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:18:59 -05:00
Mauro Carvalho Chehab 070250a171 media: s5k6aa: describe some function parameters
as warned:
  drivers/media/i2c/s5k6aa.c:429: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:679: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 'preset'
  drivers/media/i2c/s5k6aa.c:787: warning: No description found for parameter 'sd'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:18:58 -05:00
Mauro Carvalho Chehab 7cd183696e media: s5k6a3: document some fields at struct s5k6a3
drivers/media/i2c/s5k6a3.c:68: warning: No description found for parameter 'clock'
drivers/media/i2c/s5k6a3.c:68: warning: No description found for parameter 'clock_frequency'
drivers/media/i2c/s5k6a3.c:68: warning: No description found for parameter 'power_count'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:18:57 -05:00
Mauro Carvalho Chehab 897aa67a47 media: m5mols: fix some kernel-doc markups
Fix those warnings:
	drivers/media/i2c/m5mols/m5mols_capture.c:42: warning: No description found for parameter 'sd'
	drivers/media/i2c/m5mols/m5mols_capture.c:42: warning: No description found for parameter 'addr_num'
	drivers/media/i2c/m5mols/m5mols_capture.c:42: warning: No description found for parameter 'addr_den'
	drivers/media/i2c/m5mols/m5mols_capture.c:42: warning: No description found for parameter 'val'
	drivers/media/i2c/m5mols/m5mols_capture.c:60: warning: No description found for parameter 'info'
	drivers/media/i2c/m5mols/m5mols_controls.c:134: warning: No description found for parameter 'info'
	drivers/media/i2c/m5mols/m5mols_core.c:124: warning: No description found for parameter 'data'
	drivers/media/i2c/m5mols/m5mols_core.c:124: warning: No description found for parameter 'length'
	drivers/media/i2c/m5mols/m5mols_core.c:124: warning: Excess function parameter 'size' description in 'm5mols_swap_byte'
	drivers/media/i2c/m5mols/m5mols_core.c:142: warning: No description found for parameter 'sd'
	drivers/media/i2c/m5mols/m5mols_core.c:241: warning: No description found for parameter 'sd'
	drivers/media/i2c/m5mols/m5mols_core.c:299: warning: No description found for parameter 'sd'
	drivers/media/i2c/m5mols/m5mols_core.c:324: warning: No description found for parameter 'sd'
	drivers/media/i2c/m5mols/m5mols_core.c:324: warning: No description found for parameter 'reg'
	drivers/media/i2c/m5mols/m5mols_core.c:357: warning: No description found for parameter 'sd'
	drivers/media/i2c/m5mols/m5mols_core.c:357: warning: No description found for parameter 'mode'
	drivers/media/i2c/m5mols/m5mols_core.c:374: warning: No description found for parameter 'info'
	drivers/media/i2c/m5mols/m5mols_core.c:429: warning: No description found for parameter 'sd'
	drivers/media/i2c/m5mols/m5mols_core.c:503: warning: No description found for parameter 'sd'
	drivers/media/i2c/m5mols/m5mols_core.c:671: warning: No description found for parameter 'info'
	drivers/media/i2c/m5mols/m5mols_core.c:694: warning: No description found for parameter 'info'
	drivers/media/i2c/m5mols/m5mols_core.c:798: warning: No description found for parameter 'sd'
	drivers/media/i2c/m5mols/m5mols_core.c:853: warning: No description found for parameter 'sd'
	drivers/media/i2c/m5mols/m5mols_core.c:853: warning: No description found for parameter 'on'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:18:55 -05:00
Linus Torvalds 5d352e69c6 media updates for v4.15-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJaC/4EAAoJEAhfPr2O5OEVQnsP/2JNpdLuzgwNp0p2gXrvK5pl
 KOsA6Fld6RNmpuel8eHARbbDTPKF1Y1bvYXVo7lPhXb7KuM2IzG56VxoNech/5pX
 eflKwnpV/Ns/ZMLYue7Rqdw0iZnjWESBWf5lzg9MvzwhZBaPlRwqu/aOJy360AZr
 FnjKHtU/6WUIOCB8r0qLBDR/epoh7y2lKfjDTcEBrURrFEsTajdyd59npdMSIQqO
 iUeeBVEIUKyytYDQNM/VOsBnh0G+2inLuykF8Nd6pYs8O0iUEUpZYwdGuwGUG1HB
 VmCcRGU62efl5nu8zQMPnwAvjXwZAh8vbS0ha+B1vBJh1RwNVUz0kKIKEgAaOMZ3
 zZa3NLfDP4cHgYtr2Xw2vSvJvDwQecmiItJKeZ/Id4cPy03TKEV1KEaHCQJHwbDn
 RP/o9C+5gagMO/oIvZPQ+esVZXQ4prAzOdX53N7HPn4Wn+k4clkI0+hMvMGf67mo
 EYOguCqbN2D0e11BLiPP1bRbGZRSI8I9xcKuhcw4ajJHbRRkrjl8EW7V6c8CuMkd
 0Wj5oidFleJ0Vy+qQOPqXN1FwR7AbHNtI38JfWNz324AIrFCQERpfXVmKwRPZfl4
 YXgGIA9fil3a01YJCtxc0PsXlRkveKJ8hKCLpjXbjNTh1oSbgrDxx5sMx9PO6WqJ
 VOb6fL17rwTXlKV/GeU/
 =d9nT
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - Documentation for digital TV (both kAPI and uAPI) are now in sync
   with the implementation (except for legacy/deprecated ioctls). This
   is a major step, as there were always a gap there

 - New sensor driver: imx274

 - New cec driver: cec-gpio

 - New platform driver for rockship rga and tegra CEC

 - New RC driver: tango-ir

 - Several cleanups at atomisp driver

 - Core improvements for RC, CEC, V4L2 async probing support and DVB

 - Lots of drivers cleanup, fixes and improvements.

* tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (332 commits)
  dvb_frontend: don't use-after-free the frontend struct
  media: dib0700: fix invalid dvb_detach argument
  media: v4l2-ctrls: Don't validate BITMASK twice
  media: s5p-mfc: fix lockdep warning
  media: dvb-core: always call invoke_release() in fe_free()
  media: usb: dvb-usb-v2: dvb_usb_core: remove redundant code in dvb_usb_fe_sleep
  media: au0828: make const array addr_list static
  media: cx88: make const arrays default_addr_list and pvr2000_addr_list static
  media: drxd: make const array fastIncrDecLUT static
  media: usb: fix spelling mistake: "synchronuously" -> "synchronously"
  media: ddbridge: fix build warnings
  media: av7110: avoid 2038 overflow in debug print
  media: Don't do DMA on stack for firmware upload in the AS102 driver
  media: v4l: async: fix unregister for implicitly registered sub-device notifiers
  media: v4l: async: fix return of unitialized variable ret
  media: imx274: fix missing return assignment from call to imx274_mode_regs
  media: camss-vfe: always initialize reg at vfe_set_xbar_cfg()
  media: atomisp: make function calls cleaner
  media: atomisp: get rid of storage_class.h
  media: atomisp: get rid of wrong stddef.h include
  ...
2017-11-15 20:30:12 -08:00
Colin Ian King 2b00e30fc3 media: imx274: fix missing return assignment from call to imx274_mode_regs
The variable ret is being checked for failure however it is not being set
from the return status from the call to imx274_mode_regs. Currently ret is
alwayus zero and the check is redundant. Fix this by assigning it.

Detected by CoverityScan, CID#1460278 ("Logically dead code")

Fixes: 0985dd306f ("media: imx274: V4l2 driver for Sony imx274 CMOS sensor")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-07 03:05:40 -05:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Sakari Ailus 2e8a9fbb79 media: ov13858: Add support for flash and lens devices
Parse async sub-devices related to the sensor by switching the async
sub-device registration function.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 14:07:19 -04:00
Sakari Ailus a42e78da59 media: ov5670: Add support for flash and lens devices
Parse async sub-devices related to the sensor by switching the async
sub-device registration function.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 14:06:45 -04:00
Sakari Ailus d8932f38c1 media: et8ek8: Add support for flash and lens devices
Parse async sub-devices related to the sensor by switching the async
sub-device registration function.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 14:05:39 -04:00
Sakari Ailus c121ce5915 media: smiapp: Add support for flash and lens devices
Parse async sub-devices related to the sensor by switching the async
sub-device registration function.

These types devices aren't directly related to the sensor, but are
nevertheless handled by the smiapp driver due to the relationship of these
component to the main part of the camera module --- the sensor.

This does not yet address providing the user space with information on how
to associate the sensor or lens devices but the kernel now has the
necessary information to do that.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 14:05:01 -04:00
Akinobu Mita f283c01b80 media: ov9650: remove unnecessary terminated entry in menu items array
The test_pattern_menu[] array has two valid items and a null terminated
item.  So the control's maximum value which is passed to
v4l2_ctrl_new_std_menu_items() should be one.  However,
'ARRAY_SIZE(test_pattern_menu) - 1' is actually passed and it's not
correct.

Fix it by removing unnecessary terminated entry and let the correct
control's maximum value be passed to v4l2_ctrl_new_std_menu_items().

Cc: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 12:09:44 -04:00
Akinobu Mita dae82d9d47 media: ov5640: don't clear V4L2_SUBDEV_FL_IS_I2C
The v4l2_i2c_subdev_init() sets V4L2_SUBDEV_FL_IS_I2C flag in the
subdev->flags.  But this driver overwrites subdev->flags immediately after
calling v4l2_i2c_subdev_init().  So V4L2_SUBDEV_FL_IS_I2C is not set after
all.

This stops breaking subdev->flags and preserves V4L2_SUBDEV_FL_IS_I2C.

Side note: According to the comment in v4l2_device_unregister(), this is
problematic only if the device is platform bus device.  Device tree or
ACPI based devices are not affected.

Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 12:08:50 -04:00
Akinobu Mita 6b725eb682 media: ov2640: don't clear V4L2_SUBDEV_FL_IS_I2C
The v4l2_i2c_subdev_init() sets V4L2_SUBDEV_FL_IS_I2C flag in the
subdev->flags.  But this driver overwrites subdev->flags immediately after
calling v4l2_i2c_subdev_init().  So V4L2_SUBDEV_FL_IS_I2C is not set after
all.

This stops breaking subdev->flags and preserves V4L2_SUBDEV_FL_IS_I2C.

Side note: According to the comment in v4l2_device_unregister(), this is
problematic only if the device is platform bus device.  Device tree or
ACPI based devices are not affected.

Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 12:08:34 -04:00
Akinobu Mita baf1b186ea media: max2175: don't clear V4L2_SUBDEV_FL_IS_I2C
The v4l2_i2c_subdev_init() sets V4L2_SUBDEV_FL_IS_I2C flag in the
subdev->flags.  But this driver overwrites subdev->flags immediately after
calling v4l2_i2c_subdev_init().  So V4L2_SUBDEV_FL_IS_I2C is not set after
all.

This stops breaking subdev->flags and preserves V4L2_SUBDEV_FL_IS_I2C.

Side note: According to the comment in v4l2_device_unregister(), this is
problematic only if the device is platform bus device.  Device tree or
ACPI based devices are not affected.

Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 12:08:13 -04:00
Akinobu Mita 5cc72c4726 media: adv7180: don't clear V4L2_SUBDEV_FL_IS_I2C
The v4l2_i2c_subdev_init() sets V4L2_SUBDEV_FL_IS_I2C flag in the
subdev->flags.  But this driver overwrites subdev->flags immediately after
calling v4l2_i2c_subdev_init().  So V4L2_SUBDEV_FL_IS_I2C is not set after
all.

This stops breaking subdev->flags and preserves V4L2_SUBDEV_FL_IS_I2C.

Side note: According to the comment in v4l2_device_unregister(), this is
problematic only if the device is platform bus device.  Device tree or
ACPI based devices are not affected.

Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 12:07:56 -04:00
Kees Cook 60793f4d3e media: tvaudio: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 06:40:50 -04:00
Kees Cook a88cd60fc9 media: tc358743: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 06:39:24 -04:00
Philipp Zabel 9d39e46bdd media: tc358743: validate lane count
The TC358743 does not support more than 4 data lanes. Check that the
lane count is valid.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-27 16:15:36 +02:00
Jacob Chen cef6673440 media: i2c: OV5647: change to use macro for the registers
ref docuemnt:
  ov5647-datasheet-v1.00-2009

Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
Reviewed-by: Luis Oliveira <lolivei@synopsys.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-27 16:13:42 +02:00
Jacob Chen 7bc9f038d0 media: i2c: OV5647: ensure clock lane in LP-11 state before streaming on
When I was supporting Rpi Camera Module on the ASUS Tinker board,
I found this driver have some issues with rockchip's mipi-csi driver.
It didn't place clock lane in LP-11 state before performing
D-PHY initialisation.

>From our experience, on some OV sensors,
LP-11 state is not achieved while BIT(5)-0x4800 is cleared.

So let's set BIT(5) and BIT(0) both while not streaming, in order to
coax the clock lane into LP-11 state.

0x4800 : MIPI CTRL 00
	BIT(5) : clock lane gate enable
		0: continuous
		1: none-continuous
	BIT(0) : manually set clock lane
		0: Not used
		1: used

Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
Reviewed-by: Luis Oliveira <lolivei@synopsys.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-27 16:12:49 +02:00
Wenyou Yang 71862f63f3 media: ov7670: Add the ov7670_s_power function
Add the ov7670_s_power function which is responsible for
manipulating the power dowm mode through the PWDN pin and the reset
operation through the RESET pin, and keep it powered at all times.

[sakari.ailus@linux.intel.com: set pwdn_gpio direction only once]
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-27 16:11:46 +02:00
Wenyou Yang c0662dd4e7 media: ov7670: Add the get_fmt callback
Add the get_fmt callback, also enable V4L2_SUBDEV_FL_HAS_DEVNODE flag
to make this subdev has device node.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-27 15:54:24 +02:00
Wenyou Yang d94a26f05b media: ov7670: Add entity pads initialization
Add the media entity pads initialization.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-27 15:53:10 +02:00
Leon Luo 0985dd306f media: imx274: V4l2 driver for Sony imx274 CMOS sensor
The imx274 is a Sony CMOS image sensor that has 1/2.5 image size.
It supports up to 3840x2160 (4K) 60fps, 1080p 120fps. The interface
is 4-lane MIPI CSI-2 running at 1.44Gbps each.

This driver has been tested on Xilinx ZCU102 platform with a Leopard
LI-IMX274MIPI-FMC camera board.

Support for the following features:
-Resolutions: 3840x2160, 1920x1080, 1280x720
-Frame rate: 3840x2160 : 5 – 60fps
            1920x1080 : 5 – 120fps
            1280x720 : 5 – 120fps
-Exposure time: 16 – (frame interval) micro-seconds
-Gain: 1x - 180x
-VFLIP: enable/disabledrivers/media/i2c/imx274.c
-Test pattern: 12 test patterns

Signed-off-by: Leon Luo <leonl@leopardimaging.com>
Tested-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-27 15:22:17 +02:00
Philipp Zabel f7480ad0d4 media: tc358743: set entity function to video interface bridge
The TC358743 is an HDMI to MIPI CSI2-2 bridge.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-27 14:15:16 +02:00
Dan Carpenter 7996e5c47f media: tc358743: remove an unneeded condition
We can remove the check for if "state->cec_adap" is NULL.  The
cec_allocate_adapter() function never returns NULL and also we verified
that "state->cec_adap" is an error pointer.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-27 14:14:13 +02:00
Jacob Chen 3863d4bb55 media: i2c: tc358743: fix spelling mistake
It should be "LP-11".

Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-27 14:08:44 +02:00
Sakari Ailus 6771fce506 media: smiapp: Rely on runtime PM
Instead of relying on a mix of runtime PM and the s_power() callback, drop
the s_power() callback altogether and use runtime PM solely.

As device access is required during device power-on and power-off
sequences, runtime PM alone cannot tell whether the device is available.
Thus the "active" field is introduced in struct smiapp_sensor to tell
whether it is safe to write to the device.

Consequently there is no need to power on the device whenever a file
handle is open. This functionality is removed as well. The user may still
control the device power management through sysfs. Autosuspend remains
enabled, with 1 s delay.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-24 17:14:25 +02:00
Sakari Ailus 72eaf99f04 media: smiapp: Use __v4l2_ctrl_handler_setup()
Use unlocked __v4l2_ctrl_handler_setup() in order to make the
control setup atomic.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-24 17:08:33 +02:00
Sakari Ailus ccec44cc91 [media] smiapp: Make clock control optional
The clock control is not explicitly controlled by the driver in two cases:
ACPI based systems and when the clock is part of the power sequence of the
camera module.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:25:26 -03:00
Sakari Ailus de10c1619c [media] smiapp: Get clock rate if it's not available through DT
Obtain the clock rate from the clock framework if it's not available
through DT. The assumption is that the parent device (camera module)
defines the rate as clock control is a part of the power on and power off
sequences --- which are camera module specific.

Also use the clock rate from DT if no clock is provided.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:24:55 -03:00
Sakari Ailus f689866aec [media] smiapp: Verify clock frequency after setting it, prevent changing it
The external clock frequency was set by the driver but the obtained
frequency was never verified. Do that.

Being able to obtain the exact frequency is important as the value is used
for PLL calculations which may result in frequencies that violate the PLL
tree limits.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:24:11 -03:00
Sakari Ailus d339ec6a42 [media] smiapp: Fix error handling in power on sequence
The error handling code in smiapp_power_on() returned in case of a failed
I2C write instead of cleaning up the mess. Fix this.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:23:37 -03:00
Sakari Ailus 880d45f8fc [media] ov13858: Use do_div() for dividing a 64-bit number
ov13858 contained a 64-bit division. Use do_div() for calculating it.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:23:13 -03:00
Chiranjeevi Rapolu 58020c9f14 [media] media: ov13858: Fix 4224x3136 video flickering at some vblanks
Previously, with crop (0, 0), (4255, 3167), VTS < 0xC9E was resulting in
blank frames sometimes. This appeared as video flickering. But we need VTS
< 0xC9E to get ~30fps.

Omni Vision recommends to use crop (0,8), (4255, 3159) for 4224x3136. With
this crop, VTS 0xC8E is supported and yields ~30fps.

Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:22:37 -03:00
Chiranjeevi Rapolu 6f2a0594ae [media] media: ov13858: Calculate pixel-rate at runtime, use mode
Calculate pixel-rate at run time instead of compile time.

Instead of using hardcoded pixels-per-line, extract it from current sensor
mode.

Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:22:09 -03:00
Colin Ian King 91c158dd26 [media] ov2640: make array reset_seq static, reduces object code size
Don't populate the array reset_seq on the stack, instead make it
static.  Makes the object code smaller by over 50 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  11737	   6000	     64	  17801	   4589	drivers/media/i2c/ov2640.o

After:
   text	   data	    bss	    dec	    hex	filename
  11582	   6096	     64	  17742	   454e	drivers/media/i2c/ov2640.o

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:21:28 -03:00
Markus Elfring 19fab6fe67 [media] i2c: Improve a size determination
Replace the specification of a data structure by pointer dereferences
as the parameter for the operator "sizeof" to make size
determination a bit safer according to the Linux coding style convention.

This issue was detected by using the Coccinelle software.

[mchehab@s-opensource.com: merged similar patches]
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:15:39 -03:00
Markus Elfring 0fd5843589 [media] i2c: Delete an error messages for failed memory allocation
Omit extra messages for memory allocation failures.

This issue was detected by using the Coccinelle software.

[mchehab@s-opensource.com: merged similar patches]
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:15:22 -03:00
Chiranjeevi Rapolu 3eefbc69bb [media] media: ov5670: Fix not streaming issue after resume
Previously, the sensor was not streaming after resume from suspend,
i.e. on S0->S3->S0 transition. Due to this, camera app preview appeared
as stuck.

Now, handle streaming state correctly in case of suspend-resume.

Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:09:47 -03:00
Rajmohan Mani 1a58fbf513 [media] dw9714: Set the v4l2 focus ctrl step as 1
Current v4l2 focus ctrl step value of 16, limits the minimum granularity
of focus positions to 16. Setting this value as 1, enables more accurate
focus positions.

Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:08:47 -03:00
Fabio Estevam c3d1478024 [media] ov2640: Check the return value from clk_prepare_enable()
clk_prepare_enable() may fail, so we should better check its return value
and propagate it in the case of error.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:08:09 -03:00
Fabio Estevam 877f1af154 [media] ov2640: Propagate the real error on devm_clk_get() failure
devm_clk_get() may return different error codes other than -EPROBE_DEFER,
so it is better to return the real error code instead.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:07:42 -03:00
Fabio Estevam bddb4b5335 [media] mt9m111: Propagate the real error on v4l2_clk_get() failure
v4l2_clk_get() may return different error codes other than -EPROBE_DEFER,
so it is better to return the real error code instead.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:07:18 -03:00
Chiranjeevi Rapolu 99cd12425d [media] media: ov5670: Use recommended black level and output bias
Previously, images were relatively darker due to non-optimal
settings for black target level and bias.

Now, use recommended settings for black target level and output bias
as default values. The same default settings apply to all the resolutions.
Given these recommeneded settings do not change dynamically, add these to
existing mode register settings.

Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:06:49 -03:00
Kees Cook d17dd2db94 [media] media/i2c/tc358743: Initialize timer
This converts to use setup_timer() to set callback and data, though it
doesn't look like this would have worked with timer checking enabled
since no init_timer() was ever called before.

Cc: Mats Randgaard <matrandg@cisco.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 16:59:47 -03:00
Simon Yuan bc66c99a7e [media] media: i2c: adv748x: Map v4l2_std_id to the internal reg value
The video standard was not mapped to the corresponding value of the
internal video standard in adv748x_afe_querystd, causing the wrong
video standard to be selected.

Fixes: 3e89586a64 ("media: i2c: adv748x: add adv748x driver")
[Kieran: Obtain the std from the afe->curr_norm]

Signed-off-by: Simon Yuan <simon.yuan@navico.com>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 16:56:05 -03:00
Sean Young 831c4c81e8 [media] media: rc: ensure that protocols are enabled for scancode drivers
rc scancode drivers without change_protocol should have all
protocols enabled at all time. This was only true for cec and
ir-kbd-i2c.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 15:22:26 -03:00
Colin Ian King 3ff692fad3 media: ov9640: make const arrays res_x/y static const, reduces object code size
Don't populate the arrays res_x and resy_y on the stack, instead make them
static const.  Makes the object code smaller by over 160 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  10509	   2800	     64	  13373	   343d	ov9640.o

After:
   text	   data	    bss	    dec	    hex	filename
  10184	   2960	     64	  13208	   3398	ov9640.o

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-23 08:30:10 -04:00
Colin Ian King 2be730b828 media: cx25840: make array stds static const, reduces object code size
Don't populate the array syds on the stack, instead make it static const.
Makes the object code smaller by over 280 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  81451	  12784	    704	  94939	  172db	cx25840-core.o

   text	   data	    bss	    dec	    hex	filename
  81070	  12880	    704	  94654	  171be	cx25840-core.o

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-23 08:29:26 -04:00
Markus Elfring af28c99628 media: drivers: Adjust checks for null pointers
The script “checkpatch.pl” pointed information out like the following.

Comparison to NULL could be written !…

Thus fix the affected source code places.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
2017-09-23 08:20:57 -04:00
Markus Elfring 2d3da59ff1 media: drivers: improve a size determination
Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.

This issue was detected by using the Coccinelle software.

[mchehab@s-opensoure.com: merge similar patches into one]

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
2017-09-23 08:20:57 -04:00
Markus Elfring c38e8657a4 media: drivers: delete error messages for failed memory allocation
Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.

[mchehab@s-opensource.com: fold several similar patches into one]

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-23 08:19:55 -04:00
Hans Verkuil a0ec8d1dc4 media: tc358743: add CEC support
Add CEC support for the tc358743 HDMI-CSI bridge.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-23 07:59:19 -04:00
Hans Verkuil 42ded7a866 media: tc358743_regs.h: add CEC registers
Add the missing CEC register defines.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-23 07:57:59 -04:00
Fabio Estevam 9a45bf28bc media: max2175: Propagate the real error on devm_clk_get() failure
When devm_clk_get() fails we should return the real error code
instead of always returning -ENODEV.

This allows defer probe to happen in the case the clock provider has
not been enabled by the time max2175 driver gets probed.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27 18:14:11 -04:00
Javier Martinez Canillas 61e220adf6 media: i2c: adv748x: Export I2C device table entries as module aliases
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the
device was registered via OF, and the driver is only exporting the OF ID
table entries as module aliases.

So if the driver is built as module, autoload won't work since udev/kmod
won't be able to match the registered OF device with its driver module.

Before this patch:

$ modinfo drivers/media/i2c/adv748x/adv748x.ko | grep alias
alias:          of:N*T*Cadi,adv7482C*
alias:          of:N*T*Cadi,adv7482
alias:          of:N*T*Cadi,adv7481C*
alias:          of:N*T*Cadi,adv7481

After this patch:

modinfo drivers/media/i2c/adv748x/adv748x.ko | grep alias
alias:          of:N*T*Cadi,adv7482C*
alias:          of:N*T*Cadi,adv7482
alias:          of:N*T*Cadi,adv7481C*
alias:          of:N*T*Cadi,adv7481
alias:          i2c:adv7482
alias:          i2c:adv7481

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27 18:12:14 -04:00
Christophe JAILLET 72c901582c media: smiapp: check memory allocation failure
Check memory allocation failure and return -ENOMEM in such a case.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26 20:15:13 -04:00
Sakari Ailus f758eb2363 media: dw9714: Remove ACPI match tables, convert to use probe_new
The ACPI match table is empty. Remove it.

Also convert the drive to use probe_new callback in struct i2c_driver.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26 13:41:16 -04:00
Sakari Ailus c2bc8b06ca media: dw9714: Add Devicetree support
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26 08:47:19 -04:00
Arvind Yadav e0ee62c49f media: ths8200: constify i2c_device_id
i2c_device_id are not supposed to change at runtime. All functions
working with i2c_device_id provided by <linux/i2c.h> work with
const i2c_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26 08:43:40 -04:00
Arvind Yadav 2f8dfed83c media: tc358743: constify i2c_device_id
i2c_device_id are not supposed to change at runtime. All functions
working with i2c_device_id provided by <linux/i2c.h> work with
const i2c_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26 08:43:27 -04:00
Arvind Yadav e749d1f1ce media: saa7127: constify i2c_device_id
i2c_device_id are not supposed to change at runtime. All functions
working with i2c_device_id provided by <linux/i2c.h> work with
const i2c_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26 08:42:57 -04:00
Arvind Yadav 77c6cba385 media: adv7842: constify i2c_device_id
i2c_device_id are not supposed to change at runtime. All functions
working with i2c_device_id provided by <linux/i2c.h> work with
const i2c_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26 08:42:43 -04:00
Arvind Yadav 4bd7466bf7 media: adv7511: constify i2c_device_id
i2c_device_id are not supposed to change at runtime. All functions
working with i2c_device_id provided by <linux/i2c.h> work with
const i2c_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26 08:42:28 -04:00
Arvind Yadav 99b1ddf94d media: ad9389b: constify i2c_device_id
i2c_device_id are not supposed to change at runtime. All functions
working with i2c_device_id provided by <linux/i2c.h> work with
const i2c_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26 08:42:12 -04:00
Bhumika Goyal ea9b0f31c1 media: i2c: make device_type const
Make this const as it is only stored in the type field of a device
structure, which is const.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26 08:40:42 -04:00
Sean Young 6d741bfed5 media: rc: rename RC_TYPE_* to RC_PROTO_* and RC_BIT_* to RC_PROTO_BIT_*
RC_TYPE is confusing and it's just the protocol. So rename it.

Suggested-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20 10:02:48 -04:00
Sean Young 518f4b26be media: rc-core: rename input_name to device_name
When an ir-spi is registered, you get this message.

rc rc0: Unspecified device as /devices/platform/soc/3f215080.spi/spi_master/spi32766/spi32766.128/rc/rc0

"Unspecified device" refers to input_name, which makes no sense for IR
TX only devices. So, rename to device_name.

Also make driver_name const char* so that no casts are needed anywhere.

Now ir-spi reports:

rc rc0: IR SPI as /devices/platform/soc/3f215080.spi/spi_master/spi32766/spi32766.128/rc/rc0

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20 09:43:52 -04:00
Chiranjeevi Rapolu 17fcd5f5d0 media: ov13858: Limit vblank to permissible range
Previously, vblank range given to user was too big, falling outside
of permissible range for a given resolution. Sometimes, too low vblank
resulted in errors.

Now, limit vblank to only permissible range for a given resolution.
This change limits lower-bounds of vblank, doesn't affect upper bounds.

Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20 08:35:11 -04:00
Chiranjeevi Rapolu ed351ad948 media: ov5670: Limit vblank to permissible range
Previously, vblank range given to user was too big, falling outside
of permissible range for a given resolution. Sometimes, too low vblank
resulted in errors.

Now, limit vblank to only permissible range for a given resolution.
This change limits lower-bounds of vblank, doesn't affect upper bounds.

Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20 08:34:30 -04:00
Sakari Ailus 070ed82e32 media: et8ek8: Decrease stack usage
The et8ek8 driver combines I²C register writes to a single array that it
passes to i2c_transfer(). The maximum number of writes is 48 at once,
decrease it to 8 and make more transfers if needed.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20 08:33:46 -04:00
Julia Lawall 392296208b media: mt9m111: constify video_subdev structures
The v4l2_subdev_ops structure is only passed as the third argument
of v4l2_i2c_subdev_init, which is const, so the v4l2_subdev_ops
structure can be const as well.  The other structures are only
stored in the v4l2_subdev_ops structure, all the fields of which are
const, so these structures can also be const.

Done with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20 08:32:31 -04:00
Julia Lawall a828d818bf media: v4l: mt9t001: constify video_subdev structures
The v4l2_subdev_ops structure is only passed as the third argument of
v4l2_i2c_subdev_init, which is const, so the v4l2_subdev_ops structure
can be const as well.  The other structures are only stored in the
v4l2_subdev_ops structure, all the fields of which are const, so these
structures can also be const.

Done with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20 08:32:00 -04:00
Chiranjeevi Rapolu f14253818a media: ov5670: Fix incorrect frame timing reported to user
Previously, pixel-rate/(pixels-per-line * lines-per-frame) was
yielding incorrect frame timing for the user.

OV sensor is using internal timing and this requires
conversion (internal timing -> PPL) for correct HBLANK calculation.

Now, change pixels-per-line domain from internal sensor clock to
pixels domain. Set HBLANK read-only because fixed PPL is used for all
resolutions. And, use more accurate link-frequency 422.4MHz instead of
rounding down to 420MHz.

Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20 08:31:41 -04:00
Rob Herring 68d9c47b16 media: Convert to using %pOF instead of full_name
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Songjun Wu <songjun.wu@microchip.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
Cc: Houlong Wei <houlong.wei@mediatek.com>
Cc: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Hyun Kwon <hyun.kwon@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20 08:20:20 -04:00
Julia Lawall 71bfcc6558 media: vs6624: constify vs6624_default_fmt
The structure vs6624_default_fmt is only copied into another
structure field, so it can be const.

Done with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-09 11:19:20 -04:00
Chiranjeevi Rapolu bfced6d1ec media: ov13858: Increase digital gain granularity, range
Previously, possible digital gains were just 1x, 2x and 4x. These
coarse gains were not sufficient in fine-tuning the image capture.

Now, digital gain range is [0, 16x] with each step 1/1024, default 1x.
This is achieved through OV13858 MWB R/G/B gain controls.

Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-09 11:19:06 -04:00
Chiranjeevi Rapolu 89d8b615f2 media: ov13858: Correct link-frequency and pixel-rate
Previously both link-frequency and pixel-rate reported by
the sensor was incorrect, resulting in incorrect FPS.
Report link-frequency in Hz rather than link data rate in bps.
Calculate pixel-rate from link-frequency.

Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-09 11:18:43 -04:00
Chiranjeevi Rapolu 33eea13263 media: ov13858: Fix initial expsoure max
Previously, initial exposure max was set incorrectly to (0x7fff - 8).
Now, limit exposure max to current resolution (VTS - 8).

Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-09 11:18:09 -04:00
Chiranjeevi Rapolu b3775edc66 media: ov13858: Set default fps as current fps
On format change, sometimes, sensor was streaming at a much higher
FPS than the default. This was resulting in various problems like
frame drops/corruption.

Upon format change, set default vblank as current vblank. This will
ensure that sensor will start streaming at default fps.

Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-09 11:17:45 -04:00
Dan Carpenter 7cc7a83394 media: adv7604: Prevent out of bounds access
These can only be accessed with CAP_SYS_ADMIN so it's not a critical
security issue.  The problem is that "page" is controlled by the user in
the ioctl().  The test to see if the bit is set in state->info->page_mask
is not sufficient because "page" can be very high and shift wrap around
to a bit which is set.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-09 10:35:15 -04:00
Hans Verkuil 57b7963655 media: adv*/vivid/pulse8/rainshadow: cec: use CEC_CAP_DEFAULTS
Use the new CEC_CAP_DEFAULTS define in the adv, vivid, pulse8 and
rainshadow CEC drivers.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-09 09:37:46 -04:00
kbuild test robot 05ad2b6dbb media: i2c: fix semicolon.cocci warnings
drivers/media/i2c/ov5670.c:2033:2-3: Unneeded semicolon

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

CC: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-08 06:46:32 -04:00
Arnd Bergmann fa31c1175f media: i2c: add KConfig dependencies
The new ov5670 driver fails to build when VIDEO_V4L2_SUBDEV_API
or MEDIA_CONTROLLER are disabled:

drivers/media/i2c/ov5670.c: In function 'ov5670_open':
drivers/media/i2c/ov5670.c:1917:5: error: implicit declaration of function 'v4l2_subdev_get_try_format'; did you mean 'v4l2_subdev_notify_event'? [-Werror=implicit-function-declaration]
     v4l2_subdev_get_try_format(sd, fh->pad, 0);
     ^~~~~~~~~~~~~~~~~~~~~~~~~~
     v4l2_subdev_notify_event
drivers/media/i2c/ov5670.c:1917:38: error: 'struct v4l2_subdev_fh' has no member named 'pad'
     v4l2_subdev_get_try_format(sd, fh->pad, 0);
                                      ^~
drivers/media/i2c/ov5670.c: In function 'ov5670_do_get_pad_format':
drivers/media/i2c/ov5670.c:2198:17: error: invalid type argument of unary '*' (have 'int')
   fmt->format = *v4l2_subdev_get_try_format(&ov5670->sd, cfg,
                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          fmt->pad);
          ~~~~~~~~~
drivers/media/i2c/ov5670.c: At top level:
drivers/media/i2c/ov5670.c:2444:19: error: 'v4l2_subdev_link_validate' undeclared here (not in a function); did you mean 'v4l2_subdev_init'?
  .link_validate = v4l2_subdev_link_validate,
                   ^~~~~~~~~~~~~~~~~~~~~~~~~
                   v4l2_subdev_init
drivers/media/i2c/ov5670.c: In function 'ov5670_probe':
drivers/media/i2c/ov5670.c:2492:12: error: 'struct v4l2_subdev' has no member named 'entity'

This adds both to the Kconfig entry.

Fixes: 5de35c9b8d ("media: i2c: Add Omnivision OV5670 5M sensor support")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-08 06:34:07 -04:00
Hugues Fruchet 457a1a7ac0 media: ov9655: fix missing mutex_destroy()
Fix missing mutex_destroy() when probe fails and
when driver is removed.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-08 06:31:47 -04:00
Hugues Fruchet 0a7a13452b media: ov9650: fix coding style
Fix a bunch of coding style issues detected
by checkpatch --strict.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-08 06:30:53 -04:00
Fabio Estevam 1fc86ad052 media: ov7670: Check the return value from clk_prepare_enable()
clk_prepare_enable() may fail, so we should better check its return value
and propagate it in the case of error.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-08 06:24:58 -04:00
Fabio Estevam 011dfab805 media: ov7670: Return the real error code
When devm_clk_get() fails the real error code should be propagated,
instead of always returning -EPROBE_DEFER.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-08 06:24:33 -04:00
Fabio Estevam d9ba7bd98a media: ov5640: Remove unneeded gpiod NULL check
The gpiod API checks for NULL descriptors, so there is no need to
duplicate the check in the driver.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26 08:41:57 -04:00
Gustavo A. R. Silva 281643a2ad media: s5k5baf: remove unnecessary static in s5k5baf_get_selection()
Remove unnecessary static on local variable rtype. Such variable
is initialized before being used, on every execution path throughout
the function. The static has no benefit and, removing it reduces
the code size.

This issue was detected using Coccinelle and the following semantic patch:

@bad exists@
position p;
identifier x;
type T;
@@

static T x@p;
...
x = <+...x...+>

@@
identifier x;
expression e;
type T;
position p != bad.p;
@@

-static
 T x@p;
 ... when != x
     when strict
?x = e;

In the following log you can see the difference in the code size. Also,
there is a significant difference in the bss segment. This log is the
output of the size command, before and after the code change:

before:
   text    data     bss     dec     hex filename
  27765    5656     320   33741    83cd drivers/media/i2c/s5k5baf.o

after:
   text    data     bss     dec     hex filename
  27733    5600     256   33589    8335 drivers/media/i2c/s5k5baf.o

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26 08:37:30 -04:00
Ulrich Hecht 281ddc3cdc media: adv7180: add missing adv7180cp, adv7180st i2c device IDs
Fixes a crash on Renesas R8A7793 Gose board that uses these "compatible"
entries.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-20 06:54:04 -04:00
Mauro Carvalho Chehab cc0ff41b0f media: adv748x: get rid of unused var
drivers/media/i2c/adv748x/adv748x-csi2.c: In function 'adv748x_csi2_init_controls':
drivers/media/i2c/adv748x/adv748x-csi2.c:251:20: warning: variable 'ctrl' set but not used [-Wunused-but-set-variable]
  struct v4l2_ctrl *ctrl;
                    ^~~~

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19 16:51:01 -04:00
Kieran Bingham 3e89586a64 media: i2c: adv748x: add adv748x driver
Provide support for the ADV7481 and ADV7482.

The driver is modelled with 4 subdevices to allow simultaneous streaming
from the AFE (Analog front end) and HDMI inputs though two CSI TX
entities.

The HDMI entity is linked to the TXA CSI bus, whilst the AFE is linked
to the TXB CSI bus.

The driver is based on a prototype by Koji Matsuoka in the Renesas BSP,
and an earlier rework by Niklas Söderlund.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19 16:35:31 -04:00
Chiranjeevi Rapolu 5de35c9b8d media: i2c: Add Omnivision OV5670 5M sensor support
Provides single source pad with up to 2592x1944 pixels at 10-bit raw
bayer format over MIPI CSI2 two lanes at 840Mbps/lane.
The driver supports following features:
- up to  30fps at 5M pixels
- manual exposure
- digital/analog gain
- V-blank/H-blank
- test pattern
- media controller
- runtime pm

[mchehab@s-opensource.com: fix a trivial merge conflict at Makefile]
Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19 16:17:12 -04:00
Colin Ian King 86026abf47 media: smiapp: make various const arrays static
Don't populate const arrays on the stack but instead make them static.
Makes the object code smaller and saves nearly 550 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
   3638	    752	      0	   4390	   1126	smiapp-quirk.o

After:
   text	   data	    bss	    dec	    hex	filename
   2802	   1040	      0	   3842	    f02	smiapp-quirk.o

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19 15:53:14 -04:00
Todor Tomov e72e6cbe79 media: ov5645: Add control to export CSI2 link frequency
Add suport for standard integer menu V4L2_CID_LINK_FREQ control.
The CSI2 link frequency value is specific for each sensor mode so the
sensor mode structure is extended to add this. The control is made
read-only and its value is updated when the sensor mode is changed -
on set_format.

Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19 15:52:00 -04:00
Todor Tomov 1c2177fd99 media: ov5645: Add control to export pixel clock frequency
Add suport for standard V4L2_CID_PIXEL_RATE control. The pixel clock
frequency value is specific for each sensor mode so the sensor mode
structure is extended to add this. The control is read-only and its
value is updated when the sensor mode is changed - on set_format.

Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19 15:51:25 -04:00
Todor Tomov f7b51859e8 media: ov5645: Set media entity function
Set media entity function to MEDIA_ENT_F_CAM_SENSOR.

Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19 15:50:42 -04:00
Pavel Machek 9d2656e9c0 media: smiapp: add CCP2 support
Add support for CCP2 connected SMIA sensors as found
on the Nokia N900.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19 15:45:00 -04:00
Colin Ian King 72c6efb0d3 media: media/i2c/saa717x: fix spelling mistake: "implementd" -> "implemented"
Trivial fix to spelling mistake in v4l2_dbg debug message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19 15:00:57 -04:00
Colin Ian King 2f9b8aa36b media: i2c: m5mols: fix spelling mistake: "Machanics" -> "Mechanics"
Trivial fix to spelling mistake in v4l2_info message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19 15:00:31 -04:00
Janusz Krzysztofik 23a52386fa media: ov6650: convert to standalone v4l2 subdevice
Remove the soc_camera dependencies and move the diver to i2c

Lost features, fortunately not used or not critical on test platform:
- soc_camera power on/off callback - replaced with clock enable/disable
  only, no support for platform provided regulators nor power callback,
- soc_camera sense request - replaced with arbitrarily selected default
  master clock rate and pixel clock limit, no support for platform
  requested values,
- soc_camera board flags - no support for platform requested mbus config
  tweaks.

Tested on Amstrad Delta with now out of tree but still locally
maintained omap1_camera host driver.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-18 12:14:31 -03:00
Gustavo A. R. Silva b3d930aaf7 media: i2c: tvp5150: remove useless variable assignment in tvp5150_set_vbi()
Value assigned to variable _type_ at line 678 is overwritten at line 688
before it can be used. This makes such variable assignment useless.

Remove this variable assignment and fix some coding style issues.

Addresses-Coverity-ID: 1226968

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 19:04:46 -03:00
Arnd Bergmann be78b59e48 media: Revert "[media] et8ek8: Export OF device ID as module aliases"
This one got applied twice, causing a build error with clang:

drivers/media/i2c/et8ek8/et8ek8_driver.c:1499:1: error: redefinition of '__mod_of__et8ek8_of_table_device_table'

Fixes: 9ae05fd1e7 ("[media] et8ek8: Export OF device ID as module aliases")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 09:34:33 -03:00
Jacopo Mondi ab924af9ac [media] media: i2c: ov772x: Force use of SCCB protocol
Commit e789029761 ("i2c: sh_mobile: don't send a stop condition by
default inside transfers") makes the i2c_sh_mobile I2C-adapter emit a
stop/start sequence between messages in a single transfer only when
explicitly requested with I2C_M_STOP.

This breaks the ov772x driver in the SH4 Migo-R board as the Omnivision
sensor uses the I2C-like SCCB protocol that doesn't support repeated
starts:

i2c-sh_mobile i2c-sh_mobile.0: Transfer request timed out
ov772x 0-0021: Product ID error 92:92

Fix it by marking the client as SCCB, forcing the emission of a
stop/start sequence between all messages.
As I2C_M_STOP requires the I2C adapter to support protocol mangling,
ensure that the I2C_FUNC_PROTOCOL_MANGLING functionality is available.

Tested on SH4 Migo-R board, with OV772x now successfully probing

soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0
ov772x 0-0021: ov7725 Product ID 77:21 Manufacturer ID 7f:a2

Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-23 08:28:05 -03:00
Gustavo A. R. Silva c21e8b594c [media] i2c: tc358743: remove useless variable assignment in tc358743_isr
Remove useless variable assignment in function tc358743_isr().

The value stored in variable _intstatus_ at line 1299 is
overwritten at line 1302, just before it can be used.

Addresses-Coverity-ID: 1397678

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20 09:06:44 -03:00
Mauro Carvalho Chehab 3bd30b24ef [media] ov13858: remove duplicated const declaration
As reported by gcc:

drivers/media/i2c/ov13858.c:953:20: warning: duplicate const
drivers/media/i2c/ov13858.c:953:14: warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier]
 static const const s64 link_freq_menu_items[OV13858_NUM_OF_LINK_FREQS] = {
              ^~~~~

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20 08:50:43 -03:00
Andy Shevchenko 4ac299414b [media] as3645a: Join string literals back
There is no need to split long string literals.
Join them back.

No functional change intended.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20 08:18:12 -03:00
Rajmohan Mani cc95d3423c [media] dw9714: Initial driver for dw9714 VCM
DW9714 is a 10 bit DAC, designed for linear
control of voice coil motor.

This driver creates a V4L2 subdevice and
provides control to set the desired focus.

[Sakari Ailus: Add MAINTAINERS entry.]

Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20 08:17:48 -03:00
Hyungwoo Yang 5fcf092e0c [media] ov13858: add support for OV13858 sensor
This patch adds driver for Omnivision's ov13858
sensor, the driver supports following features:

- manual exposure/gain(analog and digital) control support
- two link frequencies
- VBLANK/HBLANK support
- test pattern support
- media controller support
- runtime pm support
- supported resolutions
  + 4224x3136 at 30FPS
  + 2112x1568 at 30FPS(default) and 60FPS
  + 2112x1188 at 30FPS(default) and 60FPS
  + 1056x784 at 30FPS(default) and 60FPS

[Sakari Ailus: use V4L2_CID_DIGITAL_GAIN instead, add MAINTAINERS entry.]

Signed-off-by: Hyungwoo Yang <hyungwoo.yang@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20 08:16:57 -03:00
Steve Longerbeam 19a81c1426 [media] add Omnivision OV5640 sensor driver
This driver is based on ov5640_mipi.c from Freescale imx_3.10.17_1.0.0_beta
branch, modified heavily to bring forward to latest interfaces and code
cleanup.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20 07:23:55 -03:00
Mauro Carvalho Chehab 8ca00927d6 [media] max2175: remove an useless comparision
load is an unsigned integer. So, it is always bigger or equal
to zero, as reported by gcc:

	drivers/media/i2c/max2175.c: In function 'max2175_refout_load_to_bits':
	drivers/media/i2c/max2175.c:1272:11: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
	  if (load >= 0 && load <= 40)
	           ^~

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20 07:11:15 -03:00
Ramesh Shanmugasundaram b47b79d8a2 [media] media: i2c: max2175: Add MAX2175 support
This patch adds driver support for the MAX2175 chip. This is Maxim
Integrated's RF to Bits tuner front end chip designed for software-defined
radio solutions. This driver exposes the tuner as a sub-device instance
with standard and custom controls to configure the device.

Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20 07:02:43 -03:00