Commit Graph

15 Commits

Author SHA1 Message Date
Jason Yan a9e545ac63 clk: qcom: ipq8074: make pcie0_rchng_clk_src static
This addresses the following sparse warning:

drivers/clk/qcom/gcc-ipq8074.c:4325:17: warning: symbol
'pcie0_rchng_clk_src' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200921142750.875142-1-yanaijie@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-09-22 11:34:33 -07:00
Sivaprakash Murugesan f0cfcf1ade clk: qcom: ipq8074: Add missing clocks for pcie
Add missing clocks and resets for pcie port0 of ipq8074 devices.

Co-developed-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Link: https://lore.kernel.org/r/1593940680-2363-5-git-send-email-sivaprak@codeaurora.org
[sboyd@kernel.org: Make freq table static const]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-11 09:12:36 -07:00
Taniya Das 3f905469c8 clk: qcom: gcc: Use floor ops for SDCC clocks
Update global clock controller SDCC2/4 clocks to use the floor rcg ops,
so as to use the rounded down clock rates for these clocks.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lkml.kernel.org/r/20190909074410.18977-1-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-09 04:39:12 -07:00
Thomas Gleixner 9c92ab6191 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
Based on 1 normalized pattern(s):

  this software is licensed under the terms of the gnu general public
  license version 2 as published by the free software foundation and
  may be copied distributed and modified under those terms this
  program is distributed in the hope that it will be useful but
  without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 285 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:36:37 +02:00
Jeffrey Hugo 760be6586f clk: qcom: Make common clk_hw registrations
Several clock controller drivers define a list of clk_hw devices, and then
register those devices in probe() before using common code to process the
rest of initialization.  Extend the common code to accept a list of clk_hw
devices to process, thus eliminating many duplicate implementations.

Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22 00:06:57 -08:00
Taniya Das da172d2b6b clk: qcom: Move frequency table macro to common file
Frequency table macro is used by multiple clock drivers, move frequency
table macro to common header file.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-06 16:45:51 -07:00
Abhishek Sahu 7f41bd4a31 clk: qcom: ipq8074: add misc resets for PCIE and NSS
PCIE and NSS has MISC reset register in which single register has
multiple reset bit. The patch adds these resets with its
corresponding reset bits.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-21 16:03:40 -08:00
Abhishek Sahu 033c9b96b2 clk: qcom: ipq8074: add GP and Crypto clocks
- It has 3 general purpose clock controller which supplies
  the clock in GPIO pins.
- It has Crypto Engine which has AXI, AHB and Core clocks.
  Other non APSS processors can also use Crypto Engine so
  these clocks are marked as VOTED clocks.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-21 16:03:37 -08:00
Abhishek Sahu 7117a51ed3 clk: qcom: ipq8074: add NSS ethernet port clocks
IPQ8074 has 6 ethernet ports which supports all ethernet speeds
from 10Mpbs to 10 Gpbs and each speed requires different clock
rates. Each port has separate TX and RX clocks. These clocks
use separate external UNIPHY PLL’s which will be registered with
separate NSS driver. The clock frequency is 125 Mhz for UNIPHY0
and 312.5 Mhz for UNIPHY1 and UNIPHY2.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-21 16:03:35 -08:00
Abhishek Sahu 5736294aef clk: qcom: ipq8074: add NSS clocks
IPQ8074 has NSS (Network Switching System) which has 2 UBI cores
and hardware crypto engine. Some clocks are separate for each UBI
core and remaining NSS clocks are common. The BIAS_PLL (300 Mhz)
and BIAS_PLL_NSS_NOC (416.5 Mhz) are external fixed clocks and
will be registered from dtsi or NSS driver.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-21 16:03:34 -08:00
Abhishek Sahu 9607f6224b clk: qcom: ipq8074: add PCIE, USB and SDCC clocks
- It has 2 instances of PCIE which uses AXI, AHB, AUX, SYS NOC
  AXI and PIPE clocks.
- It has 2 instances of USB 3.0 which uses AUX, SLEEP, PIPE,
  SYS NOC, mock UTMI and master clocks.
- It has 2 instances of SDCC which uses APSS and AHB clock.
  SDCC1 requires ICE core clock also.
- All the PIPE clocks are external clocks which will be
  registered in clock framework by PHY drivers. The enabling
  and disabling of PIPE RCG clocks are dependent upon PHY
  initialization sequence so BRANCH_HALT_DELAY flag is required for
  these clocks.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-21 16:03:33 -08:00
Abhishek Sahu b8e7e51962 clk: qcom: ipq8074: add remaining PLL’s
- GPLL2, GPLL4 and GPLL6 are general PLL clocks and parent
  for all core peripherals.
- UBI PLL is mainly used by NSS (Network Switching System).
  IPQ8074 has 2 instances of NSS UBI cores and UBI PLL will
  be used to control the core frequency.
- NSS Crypto PLL is mainly used by NSS Crypto Engine which
  supports the multiple cryptographic algorithm used in
  Ethernet.
- IPQ8074 frequency plan does not require change in PLL post
  dividers so marked the same as read-only.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-21 16:03:31 -08:00
Abhishek Sahu 32cae024f7 clk: qcom: ipq8074: fix missing GPLL0 divider width
GPLL0 uses 4 bits post divider which should be specified
in clock driver structure.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-21 16:03:26 -08:00
Abhishek Sahu 28d3f06e56 clk: qcom: support for alpha pll properties
Alpha PLL is a generic name used for QCOM PLLs which uses L and
Alpha values for configuring the integer and fractional part.
QCOM SoCs use different types of Alpha PLLs for which basic
software configuration part is common with following differences.

  1. All these PLLs have the same basic registers like
     PLL_MODE, L_VAL, ALPHA_VAL but some of the register offsets are
     different between PLLs types.

  2. The dynamic programming sequence is different in some
     of the Alpha PLLs

  3. Some of the PLLs don’t have 64 bit config control, 64 bit
     user control, VCO configuration, etc.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-13 13:45:30 -08:00
Abhishek Sahu 371a950745 clk: qcom: Add ipq8074 Global Clock Controller support
This patch adds support for the global clock controller found on
the ipq8074 based devices. This includes UART, I2C, SPI etc.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-19 17:29:41 -07:00