Factor out css disabling and hiding into cgroup_apply_control_disable().
* Nest subsystem walk inside child walk. The child walk will later be
converted to subtree walk which is a bit more expensive.
* Instead of operating on the differential masks @css_enable and
@css_disable, simply disable or hide csses according to the current
cgroup_control() and cgroup_ss_mask(). This leads to the same
result and is simpler and more robust.
* This allows error handling path to share the same code.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
Factor out async css offline draining into cgroup_drain_offline().
* Nest subsystem walk inside child walk. The child walk will later be
converted to subtree walk which is a bit more expensive.
* Relocate the draining above subsystem mask preparation, which
doesn't create any behavior differences but helps further
refactoring.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
When a controller is enabled and visible on a non-root cgroup is
determined by subtree_control and subtree_ss_mask of the parent
cgroup. For a root cgroup, by the type of the hierarchy and which
controllers are attached to it. Deciding the above on each usage is
fragile and unnecessarily complicates the users.
This patch introduces cgroup_control() and cgroup_ss_mask() which
calculate and return the [visibly] enabled subsyste mask for the
specified cgroup and conver the existing usages.
* cgroup_e_css() is restructured for simplicity.
* cgroup_calc_subtree_ss_mask() and cgroup_subtree_control_write() no
longer need to distinguish root and non-root cases.
* With cgroup_control(), cgroup_controllers_show() can now handle both
root and non-root cases. cgroup_root_controllers_show() is removed.
v2: cgroup_control() updated to yield the correct result on v1
hierarchies too. cgroup_subtree_control_write() converted.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
We're in the process of refactoring cgroup and css management paths to
separate them out to eventually allow cgroups which aren't visible
through cgroup fs. This patch factors out cgroup_create() out of
cgroup_mkdir(). cgroup_create() contains all internal object creation
and initialization. cgroup_mkdir() uses cgroup_create() to create the
internal cgroup and adds interface directory and file creation.
This patch doesn't cause any behavior differences.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
Currently, operations to initialize internal objects and create
interface directory and files are intermixed in cgroup_mkdir(). We're
in the process of refactoring cgroup and css management paths to
separate them out to eventually allow cgroups which aren't visible
through cgroup fs.
This patch reorders operations inside cgroup_mkdir() so that interface
directory and file handling comes after internal object
initialization. This will enable further refactoring.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
Currently, whether a css (cgroup_subsys_state) has its interface files
created is not tracked and assumed to change together with the owning
cgroup's lifecycle. cgroup directory and interface creation is being
separated out from internal object creation to help refactoring and
eventually allow cgroups which are not visible through cgroupfs.
This patch adds CSS_VISIBLE to track whether a css has its interface
files created and perform management operations only when necessary
which helps decoupling interface file handling from internal object
lifecycle. After this patch, all css interface file management
functions can be called regardless of the current state and will
achieve the expected result.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
Currently, interface files are created when a css is created depending
on whether @visible is set. This patch separates out the two into
separate steps to help code refactoring and eventually allow cgroups
which aren't visible through cgroup fs.
Move css_populate_dir() out of create_css() and drop @visible. While
at it, rename the function to css_create() for consistency.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
During task migration, tasks may transfer between two css_sets which
are associated with the same cgroup. If those tasks are the only
tasks in the cgroup, this currently triggers a spurious de-populated
event on the cgroup.
Fix it by bumping up populated count before bumping it down during
migration to ensure that it doesn't reach zero spuriously.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
css_sets are hashed by their subsys[] contents and in cgroup_init()
init_css_set is hashed early, before subsystem inits, when all entries
in its subsys[] are NULL, so that cgroup_dfl_root initialization can
find and link to it. As subsystems are initialized,
init_css_set.subsys[] is filled up but the hashing is never updated
making init_css_set hashed in the wrong place. While incorrect, this
doesn't cause a critical failure as css_set management code would
create an identical css_set dynamically.
Fix it by rehashing init_css_set after subsystems are initialized.
While at it, drop unnecessary @key local variable.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
An associated css can be around for quite a while after a cgroup
directory has been removed. In general, it makes sense to reset it to
defaults so as not to worry about any remnants. For instance, memory
cgroup needs to reset memory.low, otherwise pages charged to a dead
cgroup might never get reclaimed. There's ->css_reset callback, which
would fit perfectly for the purpose. Currently, it's only called when a
subsystem is disabled in the unified hierarchy and there are other
subsystems dependant on it. Let's call it on css destruction as well.
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
copy_cgroup_ns()'s error handling was broken and the attempt to fix it
d22025570e ("cgroup: fix alloc_cgroup_ns() error handling in
copy_cgroup_ns()") was broken too in that it ended up trying an
ERR_PTR() value.
There's only one place where copy_cgroup_ns() needs to perform cleanup
after failure. Simplify and fix the error handling by removing the
goto's.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
There is a mistake about the print format name:id <--> %d:%s, which
the name is 'char *' type and id is 'int' type. Change "name:id" to
"id:name" instead to be consistent with "cgroup_subsys %d:%s".
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Acked-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
No internal process rule is enforced by cgroup_migrate_prepare_dst()
during process migration. It tests whether the target cgroup's
->child_subsys_mask is zero which is different from "subtree_control"
write path which tests ->subtree_control. This hasn't mattered
because up until now, both ->child_subsys_mask and ->subtree_control
are zero or non-zero at the same time. However, with the planned
addition of implicit controllers, this will no longer be true.
This patch prepares for the change by making
cgorup_migrate_prepare_dst() test ->subtree_control instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
The function currently returns -EBADF for a directory on the default
hierarchy. Make it also recognize cgroup2_fs_type. This will be used
for perf_event cgroup2 support.
Signed-off-by: Tejun Heo <tj@kernel.org>
After the recent do_each_subsys_mask() conversion, there's no reason
to use ulong for subsystem masks. We'll be adding more subsystem
masks to persistent data structures, let's reduce its size to u16
which should be enough for now and the foreseeable future.
This doesn't create any noticeable behavior differences.
v2: Johannes spotted that the initial patch missed cgroup_no_v1_mask.
Converted.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
There are several places in cgroup_subtree_control_write() which can
use do_each_subsys_mask() instead of manual mask testing. Use it.
No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
for_each_subsys_which() allows iterating subsystems specified in a
subsystem bitmask; unfortunately, it requires the mask to be an
unsigned long l-value which can be inconvenient and makes it awkward
to use a smaller type for subsystem masks.
This patch converts for_each_subsy_which() to do-while style which
allows it to drop the l-value requirement. The new iterator is named
do_each_subsys_mask() / while_each_subsys_mask().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
This reverts commit 56c807ba4e.
cgroup_subsys->css_e_css_changed() was supposed to be used by cgroup
writeback support; however, the change to per-inode cgroup association
made it unnecessary and the callback doesn't have any user. Remove
it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
cgroup_addrm_files() incorrectly returned 0 after add failure. Fix
it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
alloc_cgroup_ns() returns an ERR_PTR value on error but
copy_cgroup_ns() was checking for NULL for error. Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
allowing root in a non-init user namespace to mount it. This should
now be safe, because
1. non-init-root cannot mount a previously unbound subsystem
2. the task doing the mount must be privileged with respect to the
user namespace owning the cgroup namespace
3. the mounted subsystem will have its current cgroup as the root dentry.
the permissions will be unchanged, so tasks will receive no new
privilege over the cgroups which they did not have on the original
mounts.
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
This patch enables cgroup mounting inside userns when a process
as appropriate privileges. The cgroup filesystem mounted is
rooted at the cgroupns-root. Thus, in a container-setup, only
the hierarchy under the cgroupns-root is exposed inside the container.
This allows container management tools to run inside the containers
without depending on any global state.
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
setns on a cgroup namespace is allowed only if
task has CAP_SYS_ADMIN in its current user-namespace and
over the user-namespace associated with target cgroupns.
No implicit cgroup changes happen with attaching to another
cgroupns. It is expected that the somone moves the attaching
process under the target cgroupns-root.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Introduce the ability to create new cgroup namespace. The newly created
cgroup namespace remembers the cgroup of the process at the point
of creation of the cgroup namespace (referred as cgroupns-root).
The main purpose of cgroup namespace is to virtualize the contents
of /proc/self/cgroup file. Processes inside a cgroup namespace
are only able to see paths relative to their namespace root
(unless they are moved outside of their cgroupns-root, at which point
they will see a relative path from their cgroupns-root).
For a correctly setup container this enables container-tools
(like libcontainer, lxc, lmctfy, etc.) to create completely virtualized
containers without leaking system level cgroup hierarchy to the task.
This patch only implements the 'unshare' part of the cgroupns.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Testing cgroup2 can be painful with system software automatically
mounting and populating all cgroup controllers in v1 mode. Sometimes
they can be unmounted from rc.local, sometimes even that is too late.
Provide a commandline option to disable certain controllers in v1
mounts, so that they remain available for cgroup2 mounts.
Example use:
cgroup_no_v1=memory,cpu
cgroup_no_v1=all
Disabling will be confirmed at boot-time as such:
[ 0.013770] Disabling cpu control group subsystem in v1 mounts
[ 0.016004] Disabling memory control group subsystem in v1 mounts
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
There are three subsystem callbacks in css shutdown path -
css_offline(), css_released() and css_free(). Except for
css_released(), cgroup core didn't guarantee the order of invocation.
css_offline() or css_free() could be called on a parent css before its
children. This behavior is unexpected and led to bugs in cpu and
memory controller.
The previous patch updated ordering for css_offline() which fixes the
cpu controller issue. While there currently isn't a known bug caused
by misordering of css_free() invocations, let's fix it too for
consistency.
css_free() ordering can be trivially fixed by moving putting of the
parent css below css_free() invocation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
There are three subsystem callbacks in css shutdown path -
css_offline(), css_released() and css_free(). Except for
css_released(), cgroup core didn't guarantee the order of invocation.
css_offline() or css_free() could be called on a parent css before its
children. This behavior is unexpected and led to bugs in cpu and
memory controller.
This patch updates offline path so that a parent css is never offlined
before its children. Each css keeps online_cnt which reaches zero iff
itself and all its children are offline and offline_css() is invoked
only after online_cnt reaches zero.
This fixes the memory controller bug and allows the fix for cpu
controller.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reported-by: Brian Christiansen <brian.o.christiansen@gmail.com>
Link: http://lkml.kernel.org/g/5698A023.9070703@de.ibm.com
Link: http://lkml.kernel.org/g/CAKB58ikDkzc8REt31WBkD99+hxNzjK4+FBmhkgS+NVrC9vjMSg@mail.gmail.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
If "cpuset.memory_migrate" is set, when a process is moved from one
cpuset to another with a different memory node mask, pages in used by
the process are migrated to the new set of nodes. This was performed
synchronously in the ->attach() callback, which is synchronized
against process management. Recently, the synchronization was changed
from per-process rwsem to global percpu rwsem for simplicity and
optimization.
Combined with the synchronous mm migration, this led to deadlocks
because mm migration could schedule a work item which may in turn try
to create a new worker blocking on the process management lock held
from cgroup process migration path.
This heavy an operation shouldn't be performed synchronously from that
deep inside cgroup migration in the first place. This patch punts the
actual migration to an ordered workqueue and updates cgroup process
migration and cpuset config update paths to flush the workqueue after
all locks are released. This way, the operations still seem
synchronous to userland without entangling mm migration with process
management synchronization. CPU hotplug can also invoke mm migration
but there's no reason for it to wait for mm migrations and thus
doesn't synchronize against their completions.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: stable@vger.kernel.org # v4.4+
Pull cgroup updates from Tejun Heo:
- cgroup v2 interface is now official. It's no longer hidden behind a
devel flag and can be mounted using the new cgroup2 fs type.
Unfortunately, cpu v2 interface hasn't made it yet due to the
discussion around in-process hierarchical resource distribution and
only memory and io controllers can be used on the v2 interface at the
moment.
- The existing documentation which has always been a bit of mess is
relocated under Documentation/cgroup-v1/. Documentation/cgroup-v2.txt
is added as the authoritative documentation for the v2 interface.
- Some features are added through for-4.5-ancestor-test branch to
enable netfilter xt_cgroup match to use cgroup v2 paths. The actual
netfilter changes will be merged through the net tree which pulled in
the said branch.
- Various cleanups
* 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: rename cgroup documentations
cgroup: fix a typo.
cgroup: Remove resource_counter.txt in Documentation/cgroup-legacy/00-INDEX.
cgroup: demote subsystem init messages to KERN_DEBUG
cgroup: Fix uninitialized variable warning
cgroup: put controller Kconfig options in meaningful order
cgroup: clean up the kernel configuration menu nomenclature
cgroup_pids: fix a typo.
Subject: cgroup: Fix incomplete dd command in blkio documentation
cgroup: kill cgrp_ss_priv[CGROUP_CANFORK_COUNT] and friends
cpuset: Replace all instances of time_t with time64_t
cgroup: replace unified-hierarchy.txt with a proper cgroup v2 documentation
cgroup: rename Documentation/cgroups/ to Documentation/cgroup-legacy/
cgroup: replace __DEVEL__sane_behavior with cgroup2 fs type
Conflicts:
drivers/net/geneve.c
Here we had an overlapping change, where in 'net' the extraneous stats
bump was being removed whilst in 'net-next' the final argument to
udp_tunnel6_xmit_skb() was being changed.
Signed-off-by: David S. Miller <davem@davemloft.net>
bd1060a1d6 ("sock, cgroup: add sock->sk_cgroup") added global
spinlock cgroup_sk_update_lock but erroneously skipped initializer
leading to uninitialized spinlock warning. Fix it by using
DEFINE_SPINLOCK().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Dexuan Cui <decui@microsoft.com>
Fixes: bd1060a1d6 ("sock, cgroup: add sock->sk_cgroup")
Signed-off-by: David S. Miller <davem@davemloft.net>
In cgroup v1, dealing with cgroup membership was difficult because the
number of membership associations was unbound. As a result, cgroup v1
grew several controllers whose primary purpose is either tagging
membership or pull in configuration knobs from other subsystems so
that cgroup membership test can be avoided.
net_cls and net_prio controllers are examples of the latter. They
allow configuring network-specific attributes from cgroup side so that
network subsystem can avoid testing cgroup membership; unfortunately,
these are not only cumbersome but also problematic.
Both net_cls and net_prio aren't properly hierarchical. Both inherit
configuration from the parent on creation but there's no interaction
afterwards. An ancestor doesn't restrict the behavior in its subtree
in anyway and configuration changes aren't propagated downwards.
Especially when combined with cgroup delegation, this is problematic
because delegatees can mess up whatever network configuration
implemented at the system level. net_prio would allow the delegatees
to set whatever priority value regardless of CAP_NET_ADMIN and net_cls
the same for classid.
While it is possible to solve these issues from controller side by
implementing hierarchical allowable ranges in both controllers, it
would involve quite a bit of complexity in the controllers and further
obfuscate network configuration as it becomes even more difficult to
tell what's actually being configured looking from the network side.
While not much can be done for v1 at this point, as membership
handling is sane on cgroup v2, it'd be better to make cgroup matching
behave like other network matches and classifiers than introducing
further complications.
In preparation, this patch updates sock->sk_cgrp_data handling so that
it points to the v2 cgroup that sock was created in until either
net_prio or net_cls is used. Once either of the two is used,
sock->sk_cgrp_data reverts to its previous role of carrying prioidx
and classid. This is to avoid adding yet another cgroup related field
to struct sock.
As the mode switching can happen at most once per boot, the switching
mechanism is aimed at lowering hot path overhead. It may leak a
finite, likely small, number of cgroup refs and report spurious
prioidx or classid on switching; however, dynamic updates of prioidx
and classid have always been racy and lossy - socks between creation
and fd installation are never updated, config changes don't update
existing sockets at all, and prioidx may index with dead and recycled
cgroup IDs. Non-critical inaccuracies from small race windows won't
make any noticeable difference.
This patch doesn't make use of the pointer yet. The following patch
will implement netfilter match for cgroup2 membership.
v2: Use sock_cgroup_data to avoid inflating struct sock w/ another
cgroup specific field.
v3: Add comments explaining why sock_data_prioidx() and
sock_data_classid() use different fallback values.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Daniel Wagner <daniel.wagner@bmw-carit.de>
CC: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that nobody use the "priv" arg passed to can_fork/cancel_fork/fork we can
kill CGROUP_CANFORK_COUNT/SUBSYS_TAG/etc and cgrp_ss_priv[] in copy_process().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Consider the following v2 hierarchy.
P0 (+memory) --- P1 (-memory) --- A
\- B
P0 has memory enabled in its subtree_control while P1 doesn't. If
both A and B contain processes, they would belong to the memory css of
P1. Now if memory is enabled on P1's subtree_control, memory csses
should be created on both A and B and A's processes should be moved to
the former and B's processes the latter. IOW, enabling controllers
can cause atomic migrations into different csses.
The core cgroup migration logic has been updated accordingly but the
controller migration methods haven't and still assume that all tasks
migrate to a single target css; furthermore, the methods were fed the
css in which subtree_control was updated which is the parent of the
target csses. pids controller depends on the migration methods to
move charges and this made the controller attribute charges to the
wrong csses often triggering the following warning by driving a
counter negative.
WARNING: CPU: 1 PID: 1 at kernel/cgroup_pids.c:97 pids_cancel.constprop.6+0x31/0x40()
Modules linked in:
CPU: 1 PID: 1 Comm: systemd Not tainted 4.4.0-rc1+ #29
...
ffffffff81f65382 ffff88007c043b90 ffffffff81551ffc 0000000000000000
ffff88007c043bc8 ffffffff810de202 ffff88007a752000 ffff88007a29ab00
ffff88007c043c80 ffff88007a1d8400 0000000000000001 ffff88007c043bd8
Call Trace:
[<ffffffff81551ffc>] dump_stack+0x4e/0x82
[<ffffffff810de202>] warn_slowpath_common+0x82/0xc0
[<ffffffff810de2fa>] warn_slowpath_null+0x1a/0x20
[<ffffffff8118e031>] pids_cancel.constprop.6+0x31/0x40
[<ffffffff8118e0fd>] pids_can_attach+0x6d/0xf0
[<ffffffff81188a4c>] cgroup_taskset_migrate+0x6c/0x330
[<ffffffff81188e05>] cgroup_migrate+0xf5/0x190
[<ffffffff81189016>] cgroup_attach_task+0x176/0x200
[<ffffffff8118949d>] __cgroup_procs_write+0x2ad/0x460
[<ffffffff81189684>] cgroup_procs_write+0x14/0x20
[<ffffffff811854e5>] cgroup_file_write+0x35/0x1c0
[<ffffffff812e26f1>] kernfs_fop_write+0x141/0x190
[<ffffffff81265f88>] __vfs_write+0x28/0xe0
[<ffffffff812666fc>] vfs_write+0xac/0x1a0
[<ffffffff81267019>] SyS_write+0x49/0xb0
[<ffffffff81bcef32>] entry_SYSCALL_64_fastpath+0x12/0x76
This patch fixes the bug by removing @css parameter from the three
migration methods, ->can_attach, ->cancel_attach() and ->attach() and
updating cgroup_taskset iteration helpers also return the destination
css in addition to the task being migrated. All controllers are
updated accordingly.
* Controllers which don't care whether there are one or multiple
target csses can be converted trivially. cpu, io, freezer, perf,
netclassid and netprio fall in this category.
* cpuset's current implementation assumes that there's single source
and destination and thus doesn't support v2 hierarchy already. The
only change made by this patchset is how that single destination css
is obtained.
* memory migration path already doesn't do anything on v2. How the
single destination css is obtained is updated and the prep stage of
mem_cgroup_can_attach() is reordered to accomodate the change.
* pids is the only controller which was affected by this bug. It now
correctly handles multi-destination migrations and no longer causes
counter underflow from incorrect accounting.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
A css_set represents the relationship between a set of tasks and
css's. css_set never pinned the associated css's. This was okay
because tasks used to always disassociate immediately (in RCU sense) -
either a task is moved to a different css_set or exits and never
accesses css_set again.
Unfortunately, afcf6c8b75 ("cgroup: add cgroup_subsys->free() method
and use it to fix pids controller") and patches leading up to it made
a zombie hold onto its css_set and deref the associated css's on its
release. Nothing pins the css's after exit and it might have already
been freed leading to use-after-free.
general protection fault: 0000 [#1] PREEMPT SMP
task: ffffffff81bf2500 ti: ffffffff81be4000 task.ti: ffffffff81be4000
RIP: 0010:[<ffffffff810fa205>] [<ffffffff810fa205>] pids_cancel.constprop.4+0x5/0x40
...
Call Trace:
<IRQ>
[<ffffffff810fb02d>] ? pids_free+0x3d/0xa0
[<ffffffff810f8893>] cgroup_free+0x53/0xe0
[<ffffffff8104ed62>] __put_task_struct+0x42/0x130
[<ffffffff81053557>] delayed_put_task_struct+0x77/0x130
[<ffffffff810c6b34>] rcu_process_callbacks+0x2f4/0x820
[<ffffffff810c6af3>] ? rcu_process_callbacks+0x2b3/0x820
[<ffffffff81056e54>] __do_softirq+0xd4/0x460
[<ffffffff81057369>] irq_exit+0x89/0xa0
[<ffffffff81876212>] smp_apic_timer_interrupt+0x42/0x50
[<ffffffff818747f4>] apic_timer_interrupt+0x84/0x90
<EOI>
...
Code: 5b 5d c3 48 89 df 48 c7 c2 c9 f9 ae 81 48 c7 c6 91 2c ae 81 e8 1d 94 0e 00 31 c0 5b 5d c3 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <f0> 48 83 87 e0 00 00 00 ff 78 01 c3 80 3d 08 7a c1 00 00 74 02
RIP [<ffffffff810fa205>] pids_cancel.constprop.4+0x5/0x40
RSP <ffff88001fc03e20>
---[ end trace 89a4a4b916b90c49 ]---
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: disabled
---[ end Kernel panic - not syncing: Fatal exception in interrupt
Fix it by making css_set pin the associate css's until its release.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Reported-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Link: http://lkml.kernel.org/g/20151120041836.GA18390@codemonkey.org.uk
Link: http://lkml.kernel.org/g/5652D448.3080002@bmw-carit.de
Fixes: afcf6c8b75 ("cgroup: add cgroup_subsys->free() method and use it to fix pids controller")
Implement cgroup_get_from_path() using kernfs_walk_and_get() which
obtains a default hierarchy cgroup from its path. This will be used
to allow cgroup path based matching from outside cgroup proper -
e.g. networking and perf.
v2: Add EXPORT_SYMBOL_GPL(cgroup_get_from_path).
Signed-off-by: Tejun Heo <tj@kernel.org>
cgroup_is_descendant() currently walks up the hierarchy and compares
each ancestor to the cgroup in question. While enough for cgroup core
usages, this can't be used in hot paths to test cgroup membership.
This patch adds cgroup->ancestor_ids[] which records the IDs of all
ancestors including self and cgroup->level for the nesting level.
This allows testing whether a given cgroup is a descendant of another
in three finite steps - testing whether the two belong to the same
hierarchy, whether the descendant candidate is at the same or a higher
level than the ancestor and comparing the recorded ancestor_id at the
matching level. cgroup_is_descendant() is accordingly reimplmented
and made inline.
Signed-off-by: Tejun Heo <tj@kernel.org>
With major controllers - cpu, memory and io - shaping up for the
unified hierarchy, cgroup2 is about ready to be, gradually, released
into the wild. Replace __DEVEL__sane_behavior flag which was used to
select the unified hierarchy with a separate filesystem type "cgroup2"
so that unified hierarchy can be mounted as follows.
mount -t cgroup2 none $MOUNT_POINT
The cgroup2 fs has its own magic number - 0x63677270 ("cgrp").
v2: Assign a different magic number to cgroup2 fs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
6f60eade24 ("cgroup: generalize obtaining the handles of and
notifying cgroup files") introduced cftype->file_offset so that the
handles for per-css file instances can be recorded. These handles
then can be used, for example, to generate file modified
notifications.
Unfortunately, it made the wrong assumption that files are created
once for a given css and removed on its destruction. Due to the
dependencies among subsystems, a css may be hidden from userland and
then later shown again. This is implemented by removing and
re-creating the affected files, so the associated kernfs_node for a
given cgroup file may change over time. This incorrect assumption led
to the corruption of css->files lists.
Reimplement cftype->file_offset handling so that cgroup_file->kn is
protected by a lock and updated as files are created and destroyed.
This also makes keeping them on per-cgroup list unnecessary.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: James Sedgwick <jsedgwick@fb.com>
Fixes: 6f60eade24 ("cgroup: generalize obtaining the handles of and notifying cgroup files")
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Zefan Li <lizefan@huawei.com>
__GFP_WAIT has been used to identify atomic context in callers that hold
spinlocks or are in interrupts. They are expected to be high priority and
have access one of two watermarks lower than "min" which can be referred
to as the "atomic reserve". __GFP_HIGH users get access to the first
lower watermark and can be called the "high priority reserve".
Over time, callers had a requirement to not block when fallback options
were available. Some have abused __GFP_WAIT leading to a situation where
an optimisitic allocation with a fallback option can access atomic
reserves.
This patch uses __GFP_ATOMIC to identify callers that are truely atomic,
cannot sleep and have no alternative. High priority users continue to use
__GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and
are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify
callers that want to wake kswapd for background reclaim. __GFP_WAIT is
redefined as a caller that is willing to enter direct reclaim and wake
kswapd for background reclaim.
This patch then converts a number of sites
o __GFP_ATOMIC is used by callers that are high priority and have memory
pools for those requests. GFP_ATOMIC uses this flag.
o Callers that have a limited mempool to guarantee forward progress clear
__GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall
into this category where kswapd will still be woken but atomic reserves
are not used as there is a one-entry mempool to guarantee progress.
o Callers that are checking if they are non-blocking should use the
helper gfpflags_allow_blocking() where possible. This is because
checking for __GFP_WAIT as was done historically now can trigger false
positives. Some exceptions like dm-crypt.c exist where the code intent
is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to
flag manipulations.
o Callers that built their own GFP flags instead of starting with GFP_KERNEL
and friends now also need to specify __GFP_KSWAPD_RECLAIM.
The first key hazard to watch out for is callers that removed __GFP_WAIT
and was depending on access to atomic reserves for inconspicuous reasons.
In some cases it may be appropriate for them to use __GFP_HIGH.
The second key hazard is callers that assembled their own combination of
GFP flags instead of starting with something like GFP_KERNEL. They may
now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless
if it's missed in most cases as other activity will wake kswapd.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
css_task_iter_next() checked @it->cur_task before grabbing
css_set_lock and assumed that the result won't change afterwards;
however, tasks could leave the cgroup being iterated terminating the
iterator before css_task_lock is acquired. If this happens,
css_task_iter_next() tries to calculate the current task from NULL
cg_list pointer leading to the following oops.
BUG: unable to handle kernel paging request at fffffffffffff7d0
IP: [<ffffffff810d5f22>] css_task_iter_next+0x42/0x80
...
CPU: 4 PID: 6391 Comm: JobQDisp2 Not tainted 4.0.9-22_fbk4_rc3_81616_ge8d9cb6 #1
Hardware name: Quanta Freedom/Winterfell, BIOS F03_3B08 03/04/2014
task: ffff880868e46400 ti: ffff88083404c000 task.ti: ffff88083404c000
RIP: 0010:[<ffffffff810d5f22>] [<ffffffff810d5f22>] css_task_iter_next+0x42/0x80
RSP: 0018:ffff88083404fd28 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff88083404fd68 RCX: ffff8804697fb8b0
RDX: fffffffffffff7c0 RSI: ffff8803b7dff800 RDI: ffffffff822c0278
RBP: ffff88083404fd38 R08: 0000000000017160 R09: ffff88046f4070c0
R10: ffffffff810d61f7 R11: 0000000000000293 R12: ffff880863bf8400
R13: ffff88046b87fd80 R14: 0000000000000000 R15: ffff88083404fe58
FS: 00007fa0567e2700(0000) GS:ffff88046f900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffffffffff7d0 CR3: 0000000469568000 CR4: 00000000001406e0
Stack:
0000000000000246 0000000000000000 ffff88083404fde8 ffffffff810d6248
ffff88083404fd68 0000000000000000 ffff8803b7dff800 000001ef000001ee
0000000000000000 0000000000000000 ffff880863bf8568 0000000000000000
Call Trace:
[<ffffffff810d6248>] cgroup_pidlist_start+0x258/0x550
[<ffffffff810cf66d>] cgroup_seqfile_start+0x1d/0x20
[<ffffffff8121f8ef>] kernfs_seq_start+0x5f/0xa0
[<ffffffff811cab76>] seq_read+0x166/0x380
[<ffffffff812200fd>] kernfs_fop_read+0x11d/0x180
[<ffffffff811a7398>] __vfs_read+0x18/0x50
[<ffffffff811a745d>] vfs_read+0x8d/0x150
[<ffffffff811a756f>] SyS_read+0x4f/0xb0
[<ffffffff818d4772>] system_call_fastpath+0x12/0x17
Fix it by moving the termination condition check inside css_set_lock.
@it->cur_task is now cleared after being put and @it->task_pos is
tested for termination instead of @it->cset_pos as they indicate the
same condition and @it->task_pos is what's being dereferenced.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Calvin Owens <calvinowens@fb.com>
Fixes: ed27b9f7a1 ("cgroup: don't hold css_set_rwsem across css task iteration")
Acked-by: Zefan Li <lizefan@huawei.com>
Now that interfaces for the major three controllers - cpu, memory, io
- are shaping up, there's no reason to have an option to force legacy
files to show up on the unified hierarchy for testing. Drop it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
The init sequence shouldn't fail short of bugs and even when it does
it's better to continue with the rest of initialization and we were
silently ignoring /proc/cgroups creation failure.
Drop the explicit error handling and wrap sysfs_create_mount_point(),
register_filesystem() and proc_create() with WARN_ON()s.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
pids controller is completely broken in that it uncharges when a task
exits allowing zombies to escape resource control. With the recent
updates, cgroup core now maintains cgroup association till task free
and pids controller can be fixed by uncharging on free instead of
exit.
This patch adds cgroup_subsys->free() method and update pids
controller to use it instead of ->exit() for uncharging.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Aleksa Sarai <cyphar@cyphar.com>
cgroup_exit() is called when a task exits and disassociates the
exiting task from its cgroups and half-attach it to the root cgroup.
This is unnecessary and undesirable.
No controller actually needs an exiting task to be disassociated with
non-root cgroups. Both cpu and perf_event controllers update the
association to the root cgroup from their exit callbacks just to keep
consistent with the cgroup core behavior.
Also, this disassociation makes it difficult to track resources held
by zombies or determine where the zombies came from. Currently, pids
controller is completely broken as it uncharges on exit and zombies
always escape the resource restriction. With cgroup association being
reset on exit, fixing it is pretty painful.
There's no reason to reset cgroup membership on exit. The zombie can
be removed from its css_set so that it doesn't show up on
"cgroup.procs" and thus can't be migrated or interfere with cgroup
removal. It can still pin and point to the css_set so that its cgroup
membership is maintained. This patch makes cgroup core keep zombies
associated with their cgroups at the time of exit.
* Previous patches decoupled populated_cnt tracking from css_set
lifetime, so a dying task can be simply unlinked from its css_set
while pinning and pointing to the css_set. This keeps css_set
association from task side alive while hiding it from "cgroup.procs"
and populated_cnt tracking. The css_set reference is dropped when
the task_struct is freed.
* ->exit() callback no longer needs the css arguments as the
associated css never changes once PF_EXITING is set. Removed.
* cpu and perf_events controllers no longer need ->exit() callbacks.
There's no reason to explicitly switch away on exit. The final
schedule out is enough. The callbacks are removed.
* On traditional hierarchies, nothing changes. "/proc/PID/cgroup"
still reports "/" for all zombies. On the default hierarchy,
"/proc/PID/cgroup" keeps reporting the cgroup that the task belonged
to at the time of exit. If the cgroup gets removed before the task
is reaped, " (deleted)" is appended.
v2: Build brekage due to missing dummy cgroup_free() when
!CONFIG_CGROUP fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
css_set_rwsem is the inner lock protecting css_sets and is accessed
from hot paths such as fork and exit. Internally, it has no reason to
be a rwsem or even mutex. There are no internal blocking operations
while holding it. This was rwsem because css task iteration used to
expose it to external iterator users. As the previous patch updated
css task iteration such that the locking is not leaked to its users,
there's no reason to keep it a rwsem.
This patch converts css_set_rwsem to a spinlock and rename it to
css_set_lock. It uses bh-safe operations as a planned usage needs to
access it from RCU callback context.
Signed-off-by: Tejun Heo <tj@kernel.org>
css_sets are synchronized through css_set_rwsem but the locking scheme
is kinda bizarre. The hot paths - fork and exit - have to write lock
the rwsem making the rw part pointless; furthermore, many readers
already hold cgroup_mutex.
One of the readers is css task iteration. It read locks the rwsem
over the entire duration of iteration. This leads to silly locking
behavior. When cpuset tries to migrate processes of a cgroup to a
different NUMA node, css_set_rwsem is held across the entire migration
attempt which can take a long time locking out forking, exiting and
other cgroup operations.
This patch updates css task iteration so that it locks css_set_rwsem
only while the iterator is being advanced. css task iteration
involves two levels - css_set and task iteration. As css_sets in use
are practically immutable, simply pinning the current one is enough
for resuming iteration afterwards. Task iteration is tricky as tasks
may leave their css_set while iteration is in progress. This is
solved by keeping track of active iterators and advancing them if
their next task leaves its css_set.
v2: put_task_struct() in css_task_iter_next() moved outside
css_set_rwsem. A later patch will add cgroup operations to
task_struct free path which may grab the same lock and this avoids
deadlock possibilities.
css_set_move_task() updated to use list_for_each_entry_safe() when
walking task_iters and advancing them. This is necessary as
advancing an iter may remove it from the list.
Signed-off-by: Tejun Heo <tj@kernel.org>
* Rename css_advance_task_iter() to css_task_iter_advance_css_set()
and make it clear it->task_pos too at the end of the iteration.
* Factor out css_task_iter_advance() from css_task_iter_next(). The
new function whines if called on a terminated iterator.
Except for the termination check, this is pure reorganization and
doesn't introduce any behavior changes. This will help the planned
locking update for css_task_iter.
Signed-off-by: Tejun Heo <tj@kernel.org>
A task is associated and disassociated with its css_set in three
places - during migration, after a new task is created and when a task
exits. The first is handled by cgroup_task_migrate() and the latter
two are open-coded.
These are similar operations and spreading them over multiple places
makes it harder to follow and update. This patch collects all task
css_set [dis]association operations into css_set_move_task().
While css_set_move_task() may check whether populated state needs to
be updated when not strictly necessary, the behavior is essentially
equivalent before and after this patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
css task iteration will be updated to not leak cgroup internal locking
to iterator users. In preparation, update css_set and task lists to
be in chronological order.
For tasks, as migration path is already using list_splice_tail_init(),
only cgroup_enable_task_cg_lists() and cgroup_post_fork() need
updating. For css_sets, link_css_set() is the only place which needs
to be updated.
Signed-off-by: Tejun Heo <tj@kernel.org>
cgroup_destroy_locked() currently tests whether any css_sets are
associated to reject removal if the cgroup contains tasks. This works
because a css_set's refcnt converges with the number of tasks linked
to it and thus there's no css_set linked to a cgroup if it doesn't
have any live tasks.
To help tracking resource usage of zombie tasks, putting the ref of
css_set will be separated from disassociating the task from the
css_set which means that a cgroup may have css_sets linked to it even
when it doesn't have any live tasks.
This patch updates cgroup_destroy_locked() so that it tests
cgroup_is_populated(), which counts the number of populated css_sets,
instead of whether cgrp->cset_links is empty to determine whether the
cgroup is populated or not. This ensures that rmdirs won't be
incorrectly rejected for cgroups which only contain zombie tasks.
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, css_sets don't pin the associated cgroups. This is okay as
a cgroup with css_sets associated are not allowed to be removed;
however, to help resource tracking for zombie tasks, this is scheduled
to change such that a cgroup can be removed even when it has css_sets
associated as long as none of them are populated.
To ensure that a cgroup doesn't go away while css_sets are still
associated with it, make each associated css_set hold a reference on
the cgroup if non-root.
v2: Root cgroups are special and shouldn't be ref'd by css_sets.
Signed-off-by: Tejun Heo <tj@kernel.org>
Relocate cgroup_get(), cgroup_tryget() and cgroup_put() upwards. This
is pure code reorganization to prepare for future changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
To trigger release agent when the last task leaves the cgroup,
check_for_release() is called from put_css_set_locked(); however,
css_set being unlinked is being decoupled from task leaving the cgroup
and the correct condition to test is cgroup->nr_populated dropping to
zero which check_for_release() is already updated to test.
This patch moves check_for_release() invocation from
put_css_set_locked() to cgroup_update_populated().
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, cgroup_has_tasks() tests whether the target cgroup has any
css_set linked to it. This works because a css_set's refcnt converges
with the number of tasks linked to it and thus there's no css_set
linked to a cgroup if it doesn't have any live tasks.
To help tracking resource usage of zombie tasks, putting the ref of
css_set will be separated from disassociating the task from the
css_set which means that a cgroup may have css_sets linked to it even
when it doesn't have any live tasks.
This patch replaces cgroup_has_tasks() with cgroup_is_populated()
which tests cgroup->nr_populated instead which locally counts the
number of populated css_sets. Unlike cgroup_has_tasks(),
cgroup_is_populated() is recursive - if any of the descendants is
populated, the cgroup is populated too. While this changes the
meaning of the test, all the existing users are okay with the change.
While at it, replace the open-coded ->populated_cnt test in
cgroup_events_show() with cgroup_is_populated().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Currently, cgroup->nr_populated counts whether the cgroup has any
css_sets linked to it and the number of children which has non-zero
->nr_populated. This works because a css_set's refcnt converges with
the number of tasks linked to it and thus there's no css_set linked to
a cgroup if it doesn't have any live tasks.
To help tracking resource usage of zombie tasks, putting the ref of
css_set will be separated from disassociating the task from the
css_set which means that a cgroup may have css_sets linked to it even
when it doesn't have any live tasks.
This patch updates cgroup->nr_populated so that for the cgroup itself
it counts the number of css_sets which have tasks associated with them
so that empty css_sets don't skew the populated test.
Signed-off-by: Tejun Heo <tj@kernel.org>
49d1dc4b81 ("cgroup: implement static_key based
cgroup_subsys_enabled() and cgroup_subsys_on_dfl()") converted cgroup
enabled test to use static_key; however, cgroup_disable() is called
before static_key subsystem itself is initialized and thus leads to
the following warning when "cgroup_disable=" parameter is specified.
WARNING: CPU: 0 PID: 0 at kernel/jump_label.c:99 static_key_slow_dec+0x44/0x60()
static_key_slow_dec used before call to jump_label_init
...
Call Trace:
[<ffffffff813b18c2>] dump_stack+0x44/0x62
[<ffffffff8108dd52>] warn_slowpath_common+0x82/0xc0
[<ffffffff8108ddec>] warn_slowpath_fmt+0x5c/0x80
[<ffffffff8119c054>] static_key_slow_dec+0x44/0x60
[<ffffffff81d826b6>] cgroup_disable+0xaf/0xd6
[<ffffffff81d5f9de>] unknown_bootoption+0x8c/0x194
[<ffffffff810b0c03>] parse_args+0x273/0x4a0
[<ffffffff81d5fd67>] start_kernel+0x205/0x4b8
...
Fix it by making cgroup_disable() to record the subsystems to disable
in cgroup_disable_mask and moving the actual application to
cgroup_init() which is late enough and where the enabled state is
first used.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Andrey Wagin <avagin@gmail.com>
Link: http://lkml.kernel.org/g/CANaxB-yFuS4SA2znSvcKrO9L_CbHciHYW+o9bN8sZJ8eR9FxYA@mail.gmail.com
Fixes: 49d1dc4b81
cgroup_update_dfl_csses() is responsible for migrating processes when
controllers are enabled or disabled on the default hierarchy. As the
css association changes for all the processes in the affected cgroups,
this involves migrating multiple processes.
Up until now, it was implemented by migrating process-by-process until
the source css_sets are empty; however, this means that if a process
fails to migrate after some succeed before it, the recovery is very
tricky. This was considered okay as subsystems weren't allowed to
reject process migration on the default hierarchy; unfortunately,
enforcing this policy turned out to be problematic for certain types
of resources - realtime slices for now.
As such, the default hierarchy is gonna allow restricted failures
during migration and to support that this patch makes
cgroup_update_dfl_csses() migrate all target processes atomically
rather than one-by-one. The preceding patches made subsystems ready
for multi-process migration and factored out taskset operations making
this almost trivial. All tasks of the target processes are put in the
same taskset and the migration operations are performed once which
either fails or succeeds for all.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
Currently, cgroup_migreate() implements large part of the migration
logic inline including building the target taskset and actually
migrating them. This patch separates out the following taskset
operations.
CGROUP_TASKSET_INIT() : taskset initializer
cgroup_taskset_add() : add a task to a taskset
cgroup_taskset_migrate() : migrate a taskset to the destination cgroup
This will be used to implement atomic multi-process migration in
cgroup_update_dfl_csses(). This is pure reorganization which doesn't
introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
cgroup_migrate() has the destination cgroup as the first parameter
while cgroup_task_migrate() has the destination cset as the last.
Another migration function is scheduled to be added which can make the
discrepancy further stand out. Let's reorder cgroup_migrate()'s
parameters so that the destination cgroup is the last.
This doesn't cause any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
It wasn't explicitly documented but, when a process is being migrated,
cpuset and memcg depend on cgroup_taskset_first() returning the
threadgroup leader; however, this approach is somewhat ghetto and
would no longer work for the planned multi-process migration.
This patch introduces explicit cgroup_taskset_for_each_leader() which
iterates over only the threadgroup leaders and replaces
cgroup_taskset_first() usages for accessing the leader with it.
This prepares both memcg and cpuset for multi-process migration. This
patch also updates the documentation for cgroup_taskset_for_each() to
clarify the iteration rules and removes comments mentioning task
ordering in tasksets.
v2: A previous patch which added threadgroup leader test was dropped.
Patch updated accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
cgroup core handles creations and removals of cgroup interface files
as described by cftypes. There are cases where the handle for a given
file instance is necessary, for example, to generate a file modified
event. Currently, this is handled by explicitly matching the callback
method pointer and storing the file handle manually in
cgroup_add_file(). While this simple approach works for cgroup core
files, it can't for controller interface files.
This patch generalizes cgroup interface file handle handling. struct
cgroup_file is defined and each cftype can optionally tell cgroup core
to store the file handle by setting ->file_offset. A file handle
remains accessible as long as the containing css is accessible.
Both "cgroup.procs" and "cgroup.events" are converted to use the new
generic mechanism instead of hooking directly into cgroup_add_file().
Also, cgroup_file_notify() which takes a struct cgroup_file and
generates a file modified event on it is added and replaces explicit
kernfs_notify() invocations.
This generalizes cgroup file handle handling and allows controllers to
generate file modified notifications.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
The file creation / removal path has always been a bit icky and the
planned notification update requires css during file creation.
Restructure as follows.
* cgroup_addrm_files() now takes both @css and @cgrp and is only
called directly by other file handling functions.
* cgroup_populate/clear_dir() are replaced with
css_populate/clear_dir() taking @css and @cgrp_override.
@cgrp_override is used only when files needs to be created on /
removed from a cgroup which isn't attached to @css which happens
during subsystem rebinds. Subsystem loops are moved to the callers.
* cgroup_add_file() now takes both @css and @cgrp. @css isn't used
yet but will be used by the planned notification update.
This patch doens't cause any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
* Use local variables @scgrp and @dcgrp for @src_root->cgrp and
@dst_root->cgrp respectively.
* Use initializers to set @src_root and @css in the inner bind loop.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
After a file creation failure, cgroup_addrm_files() it didn't remove
the files which had already been created. When cgroup_populate_dir()
is the caller, this is fine as the caller performs cleanup; however,
for other callers, this may leave unactivated dangling files behind.
As kernfs directory removals are recursive, this doesn't lead to
permanent memory leak but it can, for example, fail future attempts to
create those files again.
There's no point in keeping around this sort of subtlety and it gets
in the way of planned updates to file handling. This patch makes
cgroup_addrm_files() clean up after itself on failures.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Move it upwards so that it's right below cgroup_clear_dir() and the
forward declaration is unnecessary.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
cftype->mode allows controllers to give arbitrary permissions to
interface knobs. Except for "cgroup.event_control", the existing uses
are spurious.
* Some explicitly specify S_IRUGO | S_IWUSR even though that's the
default.
* "cpuset.memory_pressure" specifies S_IRUGO while also setting a
write callback which returns -EACCES. All it needs to do is simply
not setting a write callback.
"cgroup.event_control" uses cftype->mode to make the file
world-writable. It's a misdesigned interface and we don't want
controllers to be tweaking interface file permissions in general.
This patch removes cftype->mode and all its spurious uses and
implements CFTYPE_WORLD_WRITABLE for "cgroup.event_control" which is
marked as compatibility-only.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
memcg already uses "memory.events" for event reporting and other
controllers may need event reporting too. Let's standardize on
"$SUBSYS.events" interface file for reporting events which don't
happen too frequently and thus can share event notification.
"cgroup.populated" is replaced with "populated" field in
"cgroup.events" and documentation is updated accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
cgroup_on_dfl() tests whether the cgroup's root is the default
hierarchy; however, an individual controller is only interested in
whether the controller is attached to the default hierarchy and never
tests a cgroup which doesn't belong to the hierarchy that the
controller is attached to.
This patch replaces cgroup_on_dfl() tests in controllers with faster
static_key based cgroup_subsys_on_dfl(). This leaves cgroup core as
the only user of cgroup_on_dfl() and the function is moved from the
header file to cgroup.c.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Replace cgroup_subsys->disabled tests in controllers with
cgroup_subsys_enabled(). cgroup_subsys_enabled() requires literal
subsys name as its parameter and thus can't be used for cgroup core
which iterates through controllers. For cgroup core, introduce and
use cgroup_ssid_enabled() which uses slower static_key_enabled() test
and can be indexed by subsys ID.
This leaves cgroup_subsys->disabled unused. Removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Whether a subsys is enabled and attached to the default hierarchy
seldom changes and may be tested in the hot paths. This patch
implements static_key based cgroup_subsys_enabled() and
cgroup_subsys_on_dfl() tests.
The following patches will update the users and remove duplicate
mechanisms.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
Note: This commit was originally committed as b5ba75b5fc but got
reverted by f9f9e7b776 due to the performance regression from
the percpu_rwsem write down/up operations added to cgroup task
migration path. percpu_rwsem changes which alleviate the
performance issue are pending for v4.4-rc1 merge window.
Re-apply.
Now that threadgroup locking is made global, code paths around it can
be simplified.
* lock-verify-unlock-retry dancing removed from __cgroup_procs_write().
* Race protection against de_thread() removed from
cgroup_update_dfl_csses().
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/g/55F8097A.7000206@de.ibm.com
Note: This commit was originally committed as d59cfc09c3 but got
reverted by 0c986253b9 due to the performance regression from
the percpu_rwsem write down/up operations added to cgroup task
migration path. percpu_rwsem changes which alleviate the
performance issue are pending for v4.4-rc1 merge window.
Re-apply.
The cgroup side of threadgroup locking uses signal_struct->group_rwsem
to synchronize against threadgroup changes. This per-process rwsem
adds small overhead to thread creation, exit and exec paths, forces
cgroup code paths to do lock-verify-unlock-retry dance in a couple
places and makes it impossible to atomically perform operations across
multiple processes.
This patch replaces signal_struct->group_rwsem with a global
percpu_rwsem cgroup_threadgroup_rwsem which is cheaper on the reader
side and contained in cgroups proper. This patch converts one-to-one.
This does make writer side heavier and lower the granularity; however,
cgroup process migration is a fairly cold path, we do want to optimize
thread operations over it and cgroup migration operations don't take
enough time for the lower granularity to matter.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/g/55F8097A.7000206@de.ibm.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
This reverts commit d59cfc09c3.
d59cfc09c3 ("sched, cgroup: replace signal_struct->group_rwsem with
a global percpu_rwsem") and b5ba75b5fc ("cgroup: simplify
threadgroup locking") changed how cgroup synchronizes against task
fork and exits so that it uses global percpu_rwsem instead of
per-process rwsem; unfortunately, the write [un]lock paths of
percpu_rwsem always involve synchronize_rcu_expedited() which turned
out to be too expensive.
Improvements for percpu_rwsem are scheduled to be merged in the coming
v4.4-rc1 merge window which alleviates this issue. For now, revert
the two commits to restore per-process rwsem. They will be re-applied
for the v4.4-rc1 merge window.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/g/55F8097A.7000206@de.ibm.com
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org # v4.2+
This reverts commit b5ba75b5fc.
d59cfc09c3 ("sched, cgroup: replace signal_struct->group_rwsem with
a global percpu_rwsem") and b5ba75b5fc ("cgroup: simplify
threadgroup locking") changed how cgroup synchronizes against task
fork and exits so that it uses global percpu_rwsem instead of
per-process rwsem; unfortunately, the write [un]lock paths of
percpu_rwsem always involve synchronize_rcu_expedited() which turned
out to be too expensive.
Improvements for percpu_rwsem are scheduled to be merged in the coming
v4.4-rc1 merge window which alleviates this issue. For now, revert
the two commits to restore per-process rwsem. They will be re-applied
for the v4.4-rc1 merge window.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/g/55F8097A.7000206@de.ibm.com
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org # v4.2+
When seq_show_option (commit a068acf2ee77: "fs: create and use
seq_show_option for escaping") was merged, it did not correctly collide
with cgroup's addition of legacy_name (commit 3e1d2eed39d8: "cgroup:
introduce cgroup_subsys->legacy_name") changes.
This fixes the reported name.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many file systems that implement the show_options hook fail to correctly
escape their output which could lead to unescaped characters (e.g. new
lines) leaking into /proc/mounts and /proc/[pid]/mountinfo files. This
could lead to confusion, spoofed entries (resulting in things like
systemd issuing false d-bus "mount" notifications), and who knows what
else. This looks like it would only be the root user stepping on
themselves, but it's possible weird things could happen in containers or
in other situations with delegated mount privileges.
Here's an example using overlay with setuid fusermount trusting the
contents of /proc/mounts (via the /etc/mtab symlink). Imagine the use
of "sudo" is something more sneaky:
$ BASE="ovl"
$ MNT="$BASE/mnt"
$ LOW="$BASE/lower"
$ UP="$BASE/upper"
$ WORK="$BASE/work/ 0 0
none /proc fuse.pwn user_id=1000"
$ mkdir -p "$LOW" "$UP" "$WORK"
$ sudo mount -t overlay -o "lowerdir=$LOW,upperdir=$UP,workdir=$WORK" none /mnt
$ cat /proc/mounts
none /root/ovl/mnt overlay rw,relatime,lowerdir=ovl/lower,upperdir=ovl/upper,workdir=ovl/work/ 0 0
none /proc fuse.pwn user_id=1000 0 0
$ fusermount -u /proc
$ cat /proc/mounts
cat: /proc/mounts: No such file or directory
This fixes the problem by adding new seq_show_option and
seq_show_option_n helpers, and updating the vulnerable show_option
handlers to use them as needed. Some, like SELinux, need to be open
coded due to unusual existing escape mechanisms.
[akpm@linux-foundation.org: add lost chunk, per Kees]
[keescook@chromium.org: seq_show_option should be using const parameters]
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Jan Kara <jack@suse.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Cc: J. R. Okajima <hooanon05g@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull cgroup updates from Tejun Heo:
- a new PIDs controller is added. It turns out that PIDs are actually
an independent resource from kmem due to the limited PID space.
- more core preparations for the v2 interface. Once cpu side interface
is settled, it should be ready for lifting the devel mask.
for-4.3-unified-base was temporarily branched so that other trees
(block) can pull cgroup core changes that blkcg changes depend on.
- a non-critical idr_preload usage bug fix.
* 'for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: pids: fix invalid get/put usage
cgroup: introduce cgroup_subsys->legacy_name
cgroup: don't print subsystems for the default hierarchy
cgroup: make cftype->private a unsigned long
cgroup: export cgrp_dfl_root
cgroup: define controller file conventions
cgroup: fix idr_preload usage
cgroup: add documentation for the PIDs controller
cgroup: implement the PIDs subsystem
cgroup: allow a cgroup subsystem to reject a fork
This allows cgroup subsystems to use a different name on the unified
hierarchy. cgroup_subsys->name is used on the unified hierarchy,
->legacy_name elsewhere. If ->legacy_name is not explicitly set, it's
automatically set to ->name and the userland visible behavior remains
unchanged.
v2: Make parse_cgroupfs_options() only consider ->legacy_name as mount
options are used only on legacy hierarchies. Suggested by Li
Zefan.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: cgroups@vger.kernel.org
It doesn't make sense to print subsystems on mount option or
/proc/PID/cgroup for the default hierarchy.
* cgroup.controllers file at the root of the default hierarchy lists
the currently attached controllers.
* The default hierarchy is catch-all for unmounted subsystems.
* The default hierarchy doesn't accept any mount options.
Suppress subsystem printing on mount options and /proc/PID/cgroup for
the default hierarchy.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: cgroups@vger.kernel.org
While cgroup subsystems can't be modules, blkcg supports dynamically
loadable policies which interact with cgroup core. Export
cgrp_dfl_root so that cgroup_on_dfl() can be used in those modules.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
It does not make much sense to call idr_preload with the same gfp mask
as the following idr_alloc, but this is what we do in cgroup_idr_alloc.
This patch fixes the idr_preload usage by making cgroup_idr_alloc call
idr_alloc w/o __GFP_WAIT. Since it is now safe to call cgroup_idr_alloc
with GFP_KERNEL, the patch also fixes all its callers appropriately.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This commit renames rcu_lockdep_assert() to RCU_LOCKDEP_WARN() for
consistency with the WARN() series of macros. This also requires
inverting the sense of the conditional, which this commit also does.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Add a new cgroup subsystem callback can_fork that conditionally
states whether or not the fork is accepted or rejected by a cgroup
policy. In addition, add a cancel_fork callback so that if an error
occurs later in the forking process, any state modified by can_fork can
be reverted.
Allow for a private opaque pointer to be passed from cgroup_can_fork to
cgroup_post_fork, allowing for the fork state to be stored by each
subsystem separately.
Also add a tagging system for cgroup_subsys.h to allow for CGROUP_<TAG>
enumerations to be be defined and used. In addition, explicitly add a
CGROUP_CANFORK_COUNT macro to make arrays easier to define.
This is in preparation for implementing the pids cgroup subsystem.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull user namespace updates from Eric Biederman:
"Long ago and far away when user namespaces where young it was realized
that allowing fresh mounts of proc and sysfs with only user namespace
permissions could violate the basic rule that only root gets to decide
if proc or sysfs should be mounted at all.
Some hacks were put in place to reduce the worst of the damage could
be done, and the common sense rule was adopted that fresh mounts of
proc and sysfs should allow no more than bind mounts of proc and
sysfs. Unfortunately that rule has not been fully enforced.
There are two kinds of gaps in that enforcement. Only filesystems
mounted on empty directories of proc and sysfs should be ignored but
the test for empty directories was insufficient. So in my tree
directories on proc, sysctl and sysfs that will always be empty are
created specially. Every other technique is imperfect as an ordinary
directory can have entries added even after a readdir returns and
shows that the directory is empty. Special creation of directories
for mount points makes the code in the kernel a smidge clearer about
it's purpose. I asked container developers from the various container
projects to help test this and no holes were found in the set of mount
points on proc and sysfs that are created specially.
This set of changes also starts enforcing the mount flags of fresh
mounts of proc and sysfs are consistent with the existing mount of
proc and sysfs. I expected this to be the boring part of the work but
unfortunately unprivileged userspace winds up mounting fresh copies of
proc and sysfs with noexec and nosuid clear when root set those flags
on the previous mount of proc and sysfs. So for now only the atime,
read-only and nodev attributes which userspace happens to keep
consistent are enforced. Dealing with the noexec and nosuid
attributes remains for another time.
This set of changes also addresses an issue with how open file
descriptors from /proc/<pid>/ns/* are displayed. Recently readlink of
/proc/<pid>/fd has been triggering a WARN_ON that has not been
meaningful since it was added (as all of the code in the kernel was
converted) and is not now actively wrong.
There is also a short list of issues that have not been fixed yet that
I will mention briefly.
It is possible to rename a directory from below to above a bind mount.
At which point any directory pointers below the renamed directory can
be walked up to the root directory of the filesystem. With user
namespaces enabled a bind mount of the bind mount can be created
allowing the user to pick a directory whose children they can rename
to outside of the bind mount. This is challenging to fix and doubly
so because all obvious solutions must touch code that is in the
performance part of pathname resolution.
As mentioned above there is also a question of how to ensure that
developers by accident or with purpose do not introduce exectuable
files on sysfs and proc and in doing so introduce security regressions
in the current userspace that will not be immediately obvious and as
such are likely to require breaking userspace in painful ways once
they are recognized"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
vfs: Remove incorrect debugging WARN in prepend_path
mnt: Update fs_fully_visible to test for permanently empty directories
sysfs: Create mountpoints with sysfs_create_mount_point
sysfs: Add support for permanently empty directories to serve as mount points.
kernfs: Add support for always empty directories.
proc: Allow creating permanently empty directories that serve as mount points
sysctl: Allow creating permanently empty directories that serve as mountpoints.
fs: Add helper functions for permanently empty directories.
vfs: Ignore unlocked mounts in fs_fully_visible
mnt: Modify fs_fully_visible to deal with locked ro nodev and atime
mnt: Refactor the logic for mounting sysfs and proc in a user namespace
This allows for better documentation in the code and
it allows for a simpler and fully correct version of
fs_fully_visible to be written.
The mount points converted and their filesystems are:
/sys/hypervisor/s390/ s390_hypfs
/sys/kernel/config/ configfs
/sys/kernel/debug/ debugfs
/sys/firmware/efi/efivars/ efivarfs
/sys/fs/fuse/connections/ fusectl
/sys/fs/pstore/ pstore
/sys/kernel/tracing/ tracefs
/sys/fs/cgroup/ cgroup
/sys/kernel/security/ securityfs
/sys/fs/selinux/ selinuxfs
/sys/fs/smackfs/ smackfs
Cc: stable@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
On traditional hierarchies, if a task has write access to "tasks" or
"cgroup.procs" file of a cgroup and its euid agrees with the target,
it can move the target to the cgroup; however, consider the following
scenario. The owner of each cgroup is in the parentheses.
R (root) - 0 (root) - 00 (user1) - 000 (user1)
| \ 001 (user1)
\ 1 (root) - 10 (user1)
The subtrees of 00 and 10 are delegated to user1; however, while both
subtrees may belong to the same user, it is clear that the two
subtrees are to be isolated - they're under completely separate
resource limits imposed by 0 and 1, respectively. Note that 0 and 1
aren't strictly necessary but added to ease illustrating the issue.
If user1 is allowed to move processes between the two subtrees, the
intention of the hierarchy - keeping a given group of processes under
a subtree with certain resource restrictions while delegating
management of the subtree - can be circumvented by user1.
This happens because migration permission check doesn't consider the
hierarchical nature of cgroups. To fix the issue, this patch adds an
extra permission requirement when userland tries to migrate a process
in the default hierarchy - the issuing task must have write access to
the common ancestor of "cgroup.procs" file of the ancestor in addition
to the destination's.
Conceptually, the issuer must be able to move the target process from
the source cgroup to the common ancestor of source and destination
cgroups and then to the destination. As long as delegation is done in
a proper top-down way, this guarantees that a delegatee can't smuggle
processes across disjoint delegation domains.
The next patch will add documentation on the delegation model on the
default hierarchy.
v2: Fixed missing !ret test. Spotted by Li Zefan.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Li Zefan <lizefan@huawei.com>
Separate out task / process migration permission check from
__cgroup_procs_write() into cgroup_procs_write_permission().
* Permission check is moved right above the actual migration and no
longer performed while holding rcu_read_lock().
cgroup_procs_write_permission() uses get_task_cred() / put_cred()
instead of __task_cred(). Also, !root trying to migrate kthreadd or
PF_NO_SETAFFINITY tasks will now fail with -EINVAL rather than
-EACCES which should be fine.
* The same permission check is now performed even when moving self by
specifying 0 as pid. This always succeeds so there's no functional
difference. We'll add more permission checks later and the benefits
of keeping both cases consistent outweigh the minute overhead of
doing perm checks on pid 0 case.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fix the fact that @ssid is uninitialised in the case where
CGROUP_SUBSYS_COUNT = 0 by setting ssid to 0.
Fixes: cb4a316752 ("cgroup: use bitmask to filter for_each_subsys")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Replace the explicit checking against ss_masks inside a for_each_subsys
block with for_each_subsys_which(..., ss_mask), to take advantage of the
more readable (and more efficient) macro.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Add a new macro for_each_subsys_which that allows all enabled cgroup
subsystems to be filtered by a bitmask, such that mask & (1 << ssid)
determines if the subsystem is to be processed in the loop body (where
ssid is the unique id of the subsystem).
Also replace the need_forkexit_callback with two separate bitmasks for
each callback to make (ss->{fork,exit}) checks unnecessary.
tj: add a short comment for "if (!CGROUP_SUBSYS_COUNT)".
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Now that threadgroup locking is made global, code paths around it can
be simplified.
* lock-verify-unlock-retry dancing removed from __cgroup_procs_write().
* Race protection against de_thread() removed from
cgroup_update_dfl_csses().
Signed-off-by: Tejun Heo <tj@kernel.org>
Tejun Heo