Make dlm_new_lockspace() wait until a full recovery completes
sucessfully or fails. Previously, dlm_new_lockspace() returned
to the caller after dlm_recover_members() finished, which is
only partially through recovery. The result of the previous
behavior is that the new lockspace would not be usable for some
time (especially with overlapping recoveries), and some errors
in the later part of recovery could not be returned to the caller.
Kernel callers gfs2 and cluster-md have their own wait handling to
wait for recovery to complete after calling dlm_new_lockspace().
This continues to work, but will be unnecessary.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
A lockspace can be "stopped" multiple times consecutively before
being "started" (when recoveries overlap.) In this case, the
lsop_recover_prep callback only needs to be called once when the
lockspace is first stopped, and not repeatedly for each stop.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Make clear that a particular recovery iteration must not be aborted
before membership changes are applied to the members list (ls_nodes)
and midcomms layer. Interrupting recovery before this can result
in missing node-specific changes in midcomms or through lsops.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds the resource name to dlm tracepoints. The name
usually comes through the lkb_resource, but in some cases a resource
may not yet be associated with an lkb, in which case the name and
namelen parameters are used.
It should be okay to access the lkb_resource and the res_name field at
the time when the tracepoint is invoked. The resource is assigned to a
lkb and it's reference is being held during the tracepoint call. During
this time the resource cannot be freed. Also a lkb will never switch
its assigned resource. The name of a dlm_rsb is assigned at creation
time and should never be changed during runtime as well.
The TP_printk() call uses always a hexadecimal string array
representation for the resource name (which is not necessarily ascii.)
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes a dereference of lksb of lkb when calling ast
tracepoint. First it reduces additional overhead, even if traces
are not active. Second we can deference it in TP_fast_assign from
the existing lkb parameter.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch moves the trace calls for ast and bast to before the
ast and bast callback functions are called rather than after.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes the handling of a plock operation that was interrupted
while waiting for a user space reply from dlm_controld. (This is not
the lock blocking state, i.e. locks_lock_file_wait().)
Currently, when an op is interrupted while waiting on user space, the
op is removed. When the user space result later arrives, a kernel
message is loggged: "dev_write no op...". This can be seen from a test
such as "stress-ng --fcntl 100" and interrupting it with ctrl-c.
Now, leave the op in place when interrupted and remove it when the
result arrives (the result will be ignored.) With this change, the
logged message is not expected to appear, and would indicate a bug.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch refactors do_unlock_close() by using only struct dlm_plock_info
as a parameter.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch reverses the commit bcfad4265c ("dlm: improve plock logging
if interrupted") by moving it to debug level and notifying the user an op
was removed.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds the pid information which requested the lock operation
to the debug log output.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will use the list helper list_first_entry() instead of using
list_entry() to get the first element of a list.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will optimize __put_lkb() by using kref_put_lock(). The
function kref_put_lock() will only take the lock if the reference is
going to be zero, if not the lock will never be held.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will optimize put_rsb() by using kref_put_lock(). The
function kref_put_lock() will only take the lock if the reference is
going to be zero, if not the lock will never be held.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes unnecessary error assigns to 0 at places we know that
error is zero because it was checked on non-zero before.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
We always call hold_lkb(lkb) if we increment lkb->lkb_wait_count.
So, we always need to call unhold_lkb(lkb) if we decrement
lkb->lkb_wait_count. This patch will add missing unhold_lkb(lkb) if we
decrement lkb->lkb_wait_count. In case of setting lkb->lkb_wait_count to
zero we need to countdown until reaching zero and call unhold_lkb(lkb).
The waiters list unhold_lkb(lkb) can be removed because it's done for
the last lkb_wait_count decrement iteration as it's done in
_remove_from_waiters().
This issue was discovered by a dlm gfs2 test case which use excessively
dlm_unlock(LKF_CANCEL) feature. Probably the lkb->lkb_wait_count value
never reached above 1 if this feature isn't used and so it was not
discovered before.
The testcase ended in a rsb on the rsb keep data structure with a
refcount of 1 but no lkb was associated with it, which is itself
an invalid behaviour. A side effect of that was a condition in which
the dlm was sending remove messages in a looping behaviour. With this
patch that has not been reproduced.
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes the following warning when doing a 32 bit kernel build
when pointers are 4 byte long:
In file included from ./include/linux/byteorder/little_endian.h:5,
from ./arch/x86/include/uapi/asm/byteorder.h:5,
from ./include/asm-generic/qrwlock_types.h:6,
from ./arch/x86/include/asm/spinlock_types.h:7,
from ./include/linux/spinlock_types_raw.h:7,
from ./include/linux/ratelimit_types.h:7,
from ./include/linux/printk.h:10,
from ./include/asm-generic/bug.h:22,
from ./arch/x86/include/asm/bug.h:87,
from ./include/linux/bug.h:5,
from ./include/linux/mmdebug.h:5,
from ./include/linux/gfp.h:5,
from ./include/linux/slab.h:15,
from fs/dlm/dlm_internal.h:19,
from fs/dlm/rcom.c:12:
fs/dlm/rcom.c: In function ‘dlm_send_rcom_lock’:
./include/uapi/linux/byteorder/little_endian.h:32:43: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
#define __cpu_to_le64(x) ((__force __le64)(__u64)(x))
^
./include/linux/byteorder/generic.h:86:21: note: in expansion of macro ‘__cpu_to_le64’
#define cpu_to_le64 __cpu_to_le64
^~~~~~~~~~~~~
fs/dlm/rcom.c:457:14: note: in expansion of macro ‘cpu_to_le64’
rc->rc_id = cpu_to_le64(r);
The rc_id value in dlm rcom is handled as u64. The rcom implementation
uses for an unique number generation the pointer value of the used
dlm_rsb instance. However if the pointer value is 4 bytes long
-Wpointer-to-int-cast will print a warning. We get rid of that warning
to cast the pointer to uintptr_t which is either 4 or 8 bytes. There
might be a very unlikely case where this number isn't unique anymore if
using dlm in a mixed cluster of nodes and sizeof(uintptr_t) returns 4 and
8.
However this problem was already been there and this patch should get
rid of the warning.
Fixes: 2f9dbeda8d ("dlm: use __le types for rcom messages")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean [1].
This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
In preparation to limit the scope of a list iterator to the list
traversal loop, use a dedicated pointer to point to the found element [1].
Before, the code implicitly used the head when no element was found
when using &pos->list. Since the new variable is only set if an
element was found, the list_add() is performed within the loop
and only done after the loop if it is done on the list head directly.
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch unsets ls_remove_len and ls_remove_name if a message
allocation of a remove messages fails. In this case we never send a
remove message out but set the per ls ls_remove_len ls_remove_name
variable for a pending remove. Unset those variable should indicate
possible waiters in wait_pending_remove() that no pending remove is
going on at this moment.
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch move the wake_up() call at the point when a remove message
completed. Before it was only when a remove message was going to be
sent. The possible waiter in wait_pending_remove() waits until a remove
is done if the resource name matches with the per ls variable
ls->ls_remove_name. If this is the case we must wait until a pending
remove is done which is indicated if DLM_WAIT_PENDING_COND() returns
false which will always be the case when ls_remove_len and
ls_remove_name are unset to indicate that a remove is not going on
anymore.
Fixes: 21d9ac1a53 ("fs: dlm: use event based wait for pending remove")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds a WARN_ON() check to validate the right context while
dlm_midcomms_close() is called. Even before commit 489d8e559c
("fs: dlm: add reliable connection if reconnect") in this context
dlm_lowcomms_close() flushes all ongoing transmission triggered by dlm
application stack. If we do that, it's required that no new message will
be triggered by the dlm application stack. The function
dlm_midcomms_close() is not called often so we can check if all
lockspaces are in such context.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will remove the following warning by sparse:
fs/dlm/lock.c:1049:9: warning: context imbalance in 'dlm_master_lookup' - different lock contexts for basic block
I tried to find any issues with the current handling and I did not find
any. However it is hard to follow the lock handling in this area of
dlm_master_lookup() and I suppose that sparse cannot realize that there
are no issues. The variable "toss_list" makes it really hard to follow
the lock handling because if it's set the rsb lock/refcount isn't held
but the ls->ls_rsbtbl[b].lock is held and this is one reason why the rsb
lock/refcount does not need to be held. If it's not set the
ls->ls_rsbtbl[b].lock is not held but the rsb lock/refcount is held. The
indicator of toss_list will be used to store the actual lock state.
Another possibility is that a retry can happen and then it's hard to
follow the specific code part. I did not find any issues but sparse
cannot realize that there are no issues.
To make it more easier to understand for developers and sparse as well,
we remove the toss_list variable which indicates a specific lock state
and move handling in between of this lock state in a separate function.
This function can be called now in case when the initial lock states are
taken which was previously signalled if toss_list was set or not. The
advantage here is that we can release all locks/refcounts in mostly the
same code block as it was taken.
Afterwards sparse had no issues to figure out that there are no problems
with the current lock behaviour.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch cleanups a not necessary label found which can be replaced by
a proper else handling to jump over a specific code block.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch avoids the following sparse warning:
fs/dlm/user.c:111:38: warning: incorrect type in assignment (different address spaces)
fs/dlm/user.c:111:38: expected void [noderef] __user *castparam
fs/dlm/user.c:111:38: got void *
fs/dlm/user.c:112:37: warning: incorrect type in assignment (different address spaces)
fs/dlm/user.c:112:37: expected void [noderef] __user *castaddr
fs/dlm/user.c:112:37: got void *
fs/dlm/user.c:113:38: warning: incorrect type in assignment (different address spaces)
fs/dlm/user.c:113:38: expected void [noderef] __user *bastparam
fs/dlm/user.c:113:38: got void *
fs/dlm/user.c:114:37: warning: incorrect type in assignment (different address spaces)
fs/dlm/user.c:114:37: expected void [noderef] __user *bastaddr
fs/dlm/user.c:114:37: got void *
fs/dlm/user.c:115:33: warning: incorrect type in assignment (different address spaces)
fs/dlm/user.c:115:33: expected struct dlm_lksb [noderef] __user *lksb
fs/dlm/user.c:115:33: got void *
fs/dlm/user.c:130:39: warning: cast removes address space '__user' of expression
fs/dlm/user.c:131:40: warning: cast removes address space '__user' of expression
fs/dlm/user.c:132:36: warning: cast removes address space '__user' of expression
So far I see there is no direct handling of copying a pointer value to
another pointer value. The handling only copies the actual pointer
address to a scalar type or vice versa. This should be okay because it
never handles dereferencing anything of those addresses in the kernel
space. To get rid of those warnings we doing some different casting
which results in no warnings in sparse or compiler.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch is a cleanup to move the byte order conversion to compile
time. In a simple comparison like this it's possible to move it to
static values so the compiler will always convert those values at
compile time.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes to use __le types directly in the dlm message
structure which is casted at the right dlm message buffer positions.
The main goal what is reached here is to remove sparse warnings
regarding to host to little byte order conversion or vice versa. Leaving
those sparse issues ignored and always do it in out/in functionality
tends to leave it unknown in which byte order the variable is being
handled.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes to use __le types directly in the dlm rcom
structure which is casted at the right dlm message buffer positions.
The main goal what is reached here is to remove sparse warnings
regarding to host to little byte order conversion or vice versa. Leaving
those sparse issues ignored and always do it in out/in functionality
tends to leave it unknown in which byte order the variable is being
handled.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes to use __le types directly in the dlm header
structure which is casted at the right dlm message buffer positions.
The main goal what is reached here is to remove sparse warnings
regarding to host to little byte order conversion or vice versa. Leaving
those sparse issues ignored and always do it in out/in functionality
tends to leave it unknown in which byte order the variable is being
handled.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes to use __le types directly in the dlm option headers
structures which are casted at the right dlm message buffer positions.
Currently only midcomms.c using those headers which already was calling
endian conversions on-the-fly without using in/out functionality like
other endianness handling in dlm. Using __le types now will hopefully get
useful warnings in future if we do comparison against host byte order
values.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will adds #ifndef __CHECKER__ for false positives warnings
about an imbalance lock/unlock srcu handling. Which are shown by running
sparse checks:
fs/dlm/midcomms.c:1065:20: warning: context imbalance in 'dlm_midcomms_get_mhandle' - wrong count at exit
Using __CHECKER__ will tell sparse to ignore these sections.
Those imbalances are false positive because from upper layer it is
always required to call a function in sequence, e.g. if
dlm_midcomms_get_mhandle() is successful there must be a
dlm_midcomms_commit_mhandle() call afterwards.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Instead of init global module at module loading time we can move the
initialization of those global variables at memory initialization of the
module loader.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
There is no need to call INIT_LIST_HEAD() when it's set directly
afterwards by list_add_tail().
Reported-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes the log level if a plock is removed when interrupted
from debug to info. Additional it signals now that the plock entity was
removed to let the user know what's happening.
If on a dev_write() a pending plock cannot be find it will signal that
it might have been removed because wait interruption.
Before this patch there might be a "dev_write no op ..." info message
and the users can only guess that the plock was removed before because
the wait interruption. To be sure that is the case we log both messages
on the same log level.
Let both message be logged on info layer because it should not happened
a lot and if it happens it should be clear why the op was not found.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch moves the return of FILE_LOCK_DEFERRED a little bit earlier
than checking afterwards again if the request was an asynchronous request.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Lately the different casting between plock_op and plock_xop and list
holders which was involved showed some issues which were hard to see.
This patch removes the "plock_xop" structure and introduces a
"struct plock_async_data". This structure will be set in "struct plock_op"
in case of asynchronous lock handling as the original "plock_xop" was
made for. There is no need anymore to cast pointers around for
additional fields in case of asynchronous lock handling. As disadvantage
another allocation was introduces but only needed in the asynchronous
case which is currently only used in combination with nfs lockd.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
There are several sanity checks and recover handling if they occur in
the dlm plock handling. From my understanding those operation can't run
in parallel with any list manipulation which involved setting the list
holder of plock_op, if so we have a bug which this sanity check will
warn about. Previously if such sanity check occurred the dlm plock
handling was trying to recover from it by deleting the plock_op from a
list which the holder was set to. However there is a bug in the dlm
plock handling if this case ever happens. To make such bugs are more
visible for further investigations we add a WARN_ON() on those sanity
checks and remove the recovering handling because other possible side
effects.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds a additional check if lkb->lkb_wait_count is non zero as
it is done in validate_unlock_args() to check if any operation is in
progress. While on it add a comment taken from validate_unlock_args() to
signal what the check is doing.
There might be no changes because if lkb->lkb_wait_type is non zero
implies that lkb->lkb_wait_count is non zero. However we should add the
check as it does validate_unlock_args().
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The "sock" variable is not initialized on this error path.
Cc: stable@vger.kernel.org
Fixes: 2dc6b1158c ("fs: dlm: introduce generic listen")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Here is the set of changes for the driver core for 5.17-rc1.
Lots of little things here, including:
- kobj_type cleanups
- auxiliary_bus documentation updates
- auxiliary_device conversions for some drivers (relevant
subsystems all have provided acks for these)
- kernfs lock contention reduction for some workloads
- other tiny cleanups and changes.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYd7deA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym8ngCgw0ANwrRPE5b1dthEmfU2f8Knk5kAn0pHQv6R
VRZJypgNfU/Pt0ykstZD
=CO9J
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of changes for the driver core for 5.17-rc1.
Lots of little things here, including:
- kobj_type cleanups
- auxiliary_bus documentation updates
- auxiliary_device conversions for some drivers (relevant subsystems
all have provided acks for these)
- kernfs lock contention reduction for some workloads
- other tiny cleanups and changes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (43 commits)
kobject documentation: remove default_attrs information
drivers/firmware: Add missing platform_device_put() in sysfb_create_simplefb
debugfs: lockdown: Allow reading debugfs files that are not world readable
driver core: Make bus notifiers in right order in really_probe()
driver core: Move driver_sysfs_remove() after driver_sysfs_add()
firmware: edd: remove empty default_attrs array
firmware: dmi-sysfs: use default_groups in kobj_type
qemu_fw_cfg: use default_groups in kobj_type
firmware: memmap: use default_groups in kobj_type
sh: sq: use default_groups in kobj_type
headers/uninline: Uninline single-use function: kobject_has_children()
devtmpfs: mount with noexec and nosuid
driver core: Simplify async probe test code by using ktime_ms_delta()
nilfs2: use default_groups in kobj_type
kobject: remove kset from struct kset_uevent_ops callbacks
driver core: make kobj_type constant.
driver core: platform: document registration-failure requirement
vdpa/mlx5: Use auxiliary_device driver data helpers
net/mlx5e: Use auxiliary_device driver data helpers
soundwire: intel: Use auxiliary_device driver data helpers
...
This patch prints the cluster node address if a non-cluster node
(according to the dlm config setting) tries to connect. The current
hexdump call will print in a different loglevel and only available if
dynamic debug is enabled. Additional we using the ip address format
strings to print an IETF ip4/6 string represenation.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
There is no need to pass the pointer to the kset in the struct
kset_uevent_ops callbacks as no one uses it, so just remove that pointer
entirely.
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Wedson Almeida Filho <wedsonaf@google.com>
Link: https://lore.kernel.org/r/20211227163924.3970661-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces a kmem cache for dlm_msg handles which are used
always if dlm sends a message out. Even if their are covered by midcomms
layer or not.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch introduces a kmem cache for writequeue entry. A writequeue
entry get quite a lot allocated if dlm transmit messages.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will introduce a kmem cache for allocating message handles
which are needed for midcomms layer to take track of lowcomms messages.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch cleanups the code for allocating a new buffer in the dlm
writequeue mechanism. There was a possible tuneup to allow scheduling
while a new writequeue entry needs to be allocated because either no
sending page is available or are full. To avoid multiple concurrent
users checking at the same time if an entry is available or full
alloc_wq was introduce that those are waiting if there is currently a
new writequeue entry in process to be queued so possible further users
will check on the new allocated writequeue entry if it's full.
To simplify the code we just remove this mutex and switch that the
already introduced spin lock will be held during writequeue check,
allocation and queueing. So other users can never check on available
writequeues while there is a new one in process but not queued yet.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will use an event based waitqueue to wait for a possible clash
with the ls_remove_name field of dlm_ls instead of doing busy waiting.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Currently we don't care if the DLM application stack is filling buffers
(not committed yet) while we transmit some already committed buffers.
By checking on active writequeue users before dequeue a writequeue entry
we know there is coming more data and do nothing. We wait until the send
worker will be triggered again if the writequeue entry users hit zero.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will use list_empty(&ls->ls_cb_delay) to check for last list
iteration. In case of a multiply count of MAX_CB_QUEUE and the list is
empty we do a extra goto more which we can avoid by checking on
list_empty().
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will surround the AF_INET6 case in sk_error_report() of dlm
with a #if IS_ENABLED(CONFIG_IPV6). The field sk->sk_v6_daddr is not
defined when CONFIG_IPV6 is disabled. If CONFIG_IPV6 is disabled, the
socket creation with AF_INET6 should already fail because a runtime
check if AF_INET6 is registered. However if there is the possibility
that AF_INET6 is set as sk_family the sk_error_report() callback will
print then an invalid family type error.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 4c3d90570b ("fs: dlm: don't call kernel_getpeername() in error_report()")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will replace the use of socket sk_callback_lock lock and uses
socket lock instead. Some users like sunrpc, see commit ea9afca88b
("SUNRPC: Replace use of socket sk_callback_lock with sock_lock") moving
from sk_callback_lock to sock_lock which seems to be held when the socket
callbacks are called.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
In some cases kernel_getpeername() will held the socket lock which is
already held when the socket layer calls error_report() callback. Since
commit 9dfc685e02 ("inet: remove races in inet{6}_getname()") this
problem becomes more likely because the socket lock will be held always.
You will see something like:
bob9-u5 login: [ 562.316860] BUG: spinlock recursion on CPU#7, swapper/7/0
[ 562.318562] lock: 0xffff8f2284720088, .magic: dead4ead, .owner: swapper/7/0, .owner_cpu: 7
[ 562.319522] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 5.15.0+ #135
[ 562.320346] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014
[ 562.321277] Call Trace:
[ 562.321529] <IRQ>
[ 562.321734] dump_stack_lvl+0x33/0x42
[ 562.322282] do_raw_spin_lock+0x8b/0xc0
[ 562.322674] lock_sock_nested+0x1e/0x50
[ 562.323057] inet_getname+0x39/0x110
[ 562.323425] ? sock_def_readable+0x80/0x80
[ 562.323838] lowcomms_error_report+0x63/0x260 [dlm]
[ 562.324338] ? wait_for_completion_interruptible_timeout+0xd2/0x120
[ 562.324949] ? lock_timer_base+0x67/0x80
[ 562.325330] ? do_raw_spin_unlock+0x49/0xc0
[ 562.325735] ? _raw_spin_unlock_irqrestore+0x1e/0x40
[ 562.326218] ? del_timer+0x54/0x80
[ 562.326549] sk_error_report+0x12/0x70
[ 562.326919] tcp_validate_incoming+0x3c8/0x530
[ 562.327347] ? kvm_clock_read+0x14/0x30
[ 562.327718] ? ktime_get+0x3b/0xa0
[ 562.328055] tcp_rcv_established+0x121/0x660
[ 562.328466] tcp_v4_do_rcv+0x132/0x260
[ 562.328835] tcp_v4_rcv+0xcea/0xe20
[ 562.329173] ip_protocol_deliver_rcu+0x35/0x1f0
[ 562.329615] ip_local_deliver_finish+0x54/0x60
[ 562.330050] ip_local_deliver+0xf7/0x110
[ 562.330431] ? inet_rtm_getroute+0x211/0x840
[ 562.330848] ? ip_protocol_deliver_rcu+0x1f0/0x1f0
[ 562.331310] ip_rcv+0xe1/0xf0
[ 562.331603] ? ip_local_deliver+0x110/0x110
[ 562.332011] __netif_receive_skb_core+0x46a/0x1040
[ 562.332476] ? inet_gro_receive+0x263/0x2e0
[ 562.332885] __netif_receive_skb_list_core+0x13b/0x2c0
[ 562.333383] netif_receive_skb_list_internal+0x1c8/0x2f0
[ 562.333896] ? update_load_avg+0x7e/0x5e0
[ 562.334285] gro_normal_list.part.149+0x19/0x40
[ 562.334722] napi_complete_done+0x67/0x160
[ 562.335134] virtnet_poll+0x2ad/0x408 [virtio_net]
[ 562.335644] __napi_poll+0x28/0x140
[ 562.336012] net_rx_action+0x23d/0x300
[ 562.336414] __do_softirq+0xf2/0x2ea
[ 562.336803] irq_exit_rcu+0xc1/0xf0
[ 562.337173] common_interrupt+0xb9/0xd0
It is and was always forbidden to call kernel_getpeername() in context
of error_report(). To get rid of the problem we access the destination
address for the peer over the socket structure. While on it we fix to
print out the destination port of the inet socket.
Fixes: 1a31833d08 ("DLM: Replace nodeid_to_addr with kernel_getpeername")
Reported-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes an potential overflow in sscanf and the maximum
declared string parsing length which seems to be excluding the null
termination symbol. This patch will just add one byte to be prepared on
a string with length of DLM_RESNAME_MAXLEN including the null
termination symbol.
Fixes: 5054e79de9 ("fs: dlm: add lkb debugfs functionality")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes a list_first_entry() call which is already done by
the previous con_next_wq() call.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes the following crash by receiving a invalid message:
[ 160.672220] ==================================================================
[ 160.676206] BUG: KASAN: user-memory-access in dlm_user_add_ast+0xc3/0x370
[ 160.679659] Read of size 8 at addr 00000000deadbeef by task kworker/u32:13/319
[ 160.681447]
[ 160.681824] CPU: 10 PID: 319 Comm: kworker/u32:13 Not tainted 5.14.0-rc2+ #399
[ 160.683472] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.14.0-1.module+el8.6.0+12648+6ede71a5 04/01/2014
[ 160.685574] Workqueue: dlm_recv process_recv_sockets
[ 160.686721] Call Trace:
[ 160.687310] dump_stack_lvl+0x56/0x6f
[ 160.688169] ? dlm_user_add_ast+0xc3/0x370
[ 160.689116] kasan_report.cold.14+0x116/0x11b
[ 160.690138] ? dlm_user_add_ast+0xc3/0x370
[ 160.690832] dlm_user_add_ast+0xc3/0x370
[ 160.691502] _receive_unlock_reply+0x103/0x170
[ 160.692241] _receive_message+0x11df/0x1ec0
[ 160.692926] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 160.693700] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 160.694427] ? lock_acquire+0x175/0x400
[ 160.695058] ? do_purge.isra.51+0x200/0x200
[ 160.695744] ? lock_acquired+0x360/0x5d0
[ 160.696400] ? lock_contended+0x6a0/0x6a0
[ 160.697055] ? lock_release+0x21d/0x5e0
[ 160.697686] ? lock_is_held_type+0xe0/0x110
[ 160.698352] ? lock_is_held_type+0xe0/0x110
[ 160.699026] ? ___might_sleep+0x1cc/0x1e0
[ 160.699698] ? dlm_wait_requestqueue+0x94/0x140
[ 160.700451] ? dlm_process_requestqueue+0x240/0x240
[ 160.701249] ? down_write_killable+0x2b0/0x2b0
[ 160.701988] ? do_raw_spin_unlock+0xa2/0x130
[ 160.702690] dlm_receive_buffer+0x1a5/0x210
[ 160.703385] dlm_process_incoming_buffer+0x726/0x9f0
[ 160.704210] receive_from_sock+0x1c0/0x3b0
[ 160.704886] ? dlm_tcp_shutdown+0x30/0x30
[ 160.705561] ? lock_acquire+0x175/0x400
[ 160.706197] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 160.706941] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 160.707681] process_recv_sockets+0x32/0x40
[ 160.708366] process_one_work+0x55e/0xad0
[ 160.709045] ? pwq_dec_nr_in_flight+0x110/0x110
[ 160.709820] worker_thread+0x65/0x5e0
[ 160.710423] ? process_one_work+0xad0/0xad0
[ 160.711087] kthread+0x1ed/0x220
[ 160.711628] ? set_kthread_struct+0x80/0x80
[ 160.712314] ret_from_fork+0x22/0x30
The issue is that we received a DLM message for a user lock but the
destination lock is a kernel lock. Note that the address which is trying
to derefence is 00000000deadbeef, which is in a kernel lock
lkb->lkb_astparam, this field should never be derefenced by the DLM
kernel stack. In case of a user lock lkb->lkb_astparam is lkb->lkb_ua
(memory is shared by a union field). The struct lkb_ua will be handled
by the DLM kernel stack but on a kernel lock it will contain invalid
data and ends in most likely crashing the kernel.
It can be reproduced with two cluster nodes.
node 2:
dlm_tool join test
echo "862 fooobaar 1 2 1" > /sys/kernel/debug/dlm/test_locks
echo "862 3 1" > /sys/kernel/debug/dlm/test_waiters
node 1:
dlm_tool join test
python:
foo = DLM(h_cmd=3, o_nextcmd=1, h_nodeid=1, h_lockspace=0x77222027, \
m_type=7, m_flags=0x1, m_remid=0x862, m_result=0xFFFEFFFE)
newFile = open("/sys/kernel/debug/dlm/comms/2/rawmsg", "wb")
newFile.write(bytes(foo))
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds functionality to put a lkb to the waiters state. It can
be useful to combine this feature with the "rawmsg" debugfs
functionality. It will bring the DLM lkb into a state that a message
will be parsed by the kernel.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds functionality to add an lkb during runtime. This is a
highly debugging feature only, wrong input can crash the kernel. It is a
early state feature as well. The goal is to provide a user interface for
manipulate dlm state and combine it with the rawmsg feature. It is
debugfs functionality, we don't care about UAPI breakage. Even it's
possible to add lkb's/rsb's which could never be exists in such wat by
using normal DLM operation. The user of this interface always need to
think before using this feature, not every crash which happens can really
occur during normal dlm operation.
Future there should be more functionality to add a more realistic lkb
which reflects normal DLM state inside the kernel. For now this is
enough.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds functionality to add a lkb with a specific id range.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds a dlm functionality to send a raw dlm message to a
specific cluster node. This raw message can be build by user space and
send out by writing the message to "rawmsg" dlm debugfs file.
There is a in progress scapy dlm module which provides a easy build of
DLM messages in user space. For example:
DLM(h_cmd=3, o_nextcmd=1, h_nodeid=1, h_lockspace=0xe4f48a18, ...)
The goal is to provide an easy reproducable state to crash DLM or to
fuzz the DLM kernel stack if there are possible ways to crash it.
Note: that if the sequence number is zero and dlm version is not set to
3.1 the kernel will automatic will set a right sequence number, otherwise
DLM stack testing is not possible.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes the dlm_lowcomms_new_msg() function pointer private data
from "struct mhandle *" to "void *" to provide different structures than
just "struct mhandle".
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes the ls_count busy wait to use atomic counter values
and wait_event() to wait until ls_count reach zero. It will slightly
reduce the number of holding lslist_lock. At remove lockspace we need to
retry the wait because it a lockspace get could interefere between
wait_event() and holding the lock which deletes the lockspace list entry.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes the requestqueue busy waiting algorithm to use
atomic counter values and wait_event() to wait until the requestqueue is
empty. It will slightly reduce the number of holding ls_requestqueue_mutex
mutex.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds tracepoints for dlm socket receive and send
functionality. We can use it to track how much data was send or received
to or from a specific nodeid.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds initial support for dlm tracepoints. It will introduce
tracepoints to dlm main functionality dlm_lock()/dlm_unlock() and their
complete ast() callback or blocking bast() callback.
The lock/unlock functionality has a start and end tracepoint, this is
because there exists a race in case if would have a tracepoint at the
end position only the complete/blocking callbacks could occur before. To
work with eBPF tracing and using their lookup hash functionality there
could be problems that an entry was not inserted yet. However use the
start functionality for hash insert and check again in end functionality
if there was an dlm internal error so there is no ast callback. In further
it might also that locks with local masters will occur those callbacks
immediately so we must have such functionality.
I did not make everything accessible yet, although it seems eBPF can be
used to access a lot of internal datastructures if it's aware of the
struct definitions of the running kernel instance. We still can change
it, if you do eBPF experiments e.g. time measurements between lock and
callback functionality you can simple use the local lkb_id field as hash
value in combination with the lockspace id if you have multiple
lockspaces. Otherwise you can simple use trace-cmd for some functionality,
e.g. `trace-cmd record -e dlm` and `trace-cmd report` afterwards.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch makes dlm_callback_resume info printout less noisy by
accumulate all callback queues into one printout not in 25 times steps.
It seems this printout became lately quite noisy in relationship with
gfs2.
Before:
[241767.849302] dlm: bin: dlm_callback_resume 25
[241767.854846] dlm: bin: dlm_callback_resume 25
[241767.860373] dlm: bin: dlm_callback_resume 25
...
[241767.865920] dlm: bin: dlm_callback_resume 25
[241767.871352] dlm: bin: dlm_callback_resume 25
[241767.876733] dlm: bin: dlm_callback_resume 25
After the patch:
[ 385.485728] dlm: gfs2: dlm_callback_resume 175
if zero it will not be printed out.
Reported-by: Barry Marson <bmarson@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will change to evaluate the dlm_recovery_stopped() in the
condition of the if branch instead fetch it before evaluating the
condition. As this is an atomic test-set operation it should be
evaluated in the condition itself.
Reported-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will change to use dlm_recovery_stopped() which is the dlm way
to check if the LSFL_RECOVER_STOP flag in ls_flags by using the helper.
It is an atomic operation but the check is still as before to fetch the
value if ls_recover_lock is held. There might be more further
investigations if the value can be changed afterwards and if it has any
side effects.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch moves version conversion to little endian from a runtime
variable to compile time constant.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Since commit 764ff4011424 ("fs: dlm: auto load sctp module") we try
load the sctp module before we try to create a sctp kernel socket. That
a socket creation fails now has more likely other reasons. This patch
removes the part of error to load the sctp module and instead printout
the error code.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch improves the debug output for midcomms layer by also printing
out the nodeid where users counter belongs to.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes a typo from lockspace to lockspace.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes an obsolete define for some length for an temporary
buffer which is not being used anymore. The use of this define is not
necessary anymore since commit 4798cbbfbd ("fs: dlm: rework receive
handling").
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
When dlm_release_lockspace does active shutdown on connections to
other nodes, the active shutdown will wait for any exisitng passive
shutdowns to be resolved. But, the sequence of operations during
dlm_release_lockspace can prevent the normal resolution of passive
shutdowns (processed normally by way of lockspace recovery.)
This disruption of passive shutdown handling can cause the active
shutdown to wait for a full timeout period, delaying the completion
of dlm_release_lockspace.
To fix this, make dlm_release_lockspace resolve existing passive
shutdowns (by calling dlm_clear_members earlier), before it does
active shutdowns. The active shutdowns will not find any passive
shutdowns to wait for, and will not be delayed.
Reported-by: Chris Mackowski <cmackows@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will return -EINTR instead of 1 if recovery is stopped. In
case of ping_members() the return value will be checked if the error is
-EINTR for signaling another recovery was triggered and the whole
recovery process will come to a clean end to process the next one.
Returning 1 will abort the recovery process and can leave the recovery
in a broken state.
It was reported with the following kernel log message attached and a gfs2
mount stopped working:
"dlm: bobvirt1: dlm_recover_members error 1"
whereas 1 was returned because of a conversion of "dlm_recovery_stopped()"
to an errno was missing which this patch will introduce. While on it all
other possible missing errno conversions at other places were added as
they are done as in other places.
It might be worth to check the error case at this recovery level,
because some of the functionality also returns -ENOBUFS and check why
recovery ends in a broken state. However this will fix the issue if
another recovery was triggered at some points of recovery handling.
Reported-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes that we don't ack each message. Lowcomms will take
care about to send an ack back after a bulk of messages was processed.
Currently it's only when the whole receive buffer was processed, there
might better positions to send an ack back but only the lowcomms
implementation know when there are more data to receive. This patch has
also disadvantages that we might retransmit more on errors, however this
is a very rare case.
Tested with make_panic on gfs2 with three nodes by running:
trace-cmd record -p function -l 'dlm_send_ack' sleep 100
and
trace-cmd report | wc -l
Before patch:
- 20548
- 21376
- 21398
After patch:
- 18338
- 20679
- 19949
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch moves the kernel_recvmsg() loop call into the
receive_from_sock() function instead of doing the loop outside the
function and abort the loop over it's return value.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will add a mutex that a connection can allocate a writequeue
entry buffer only at a sleepable context at one time. If multiple caller
waits at the writequeue spinlock and the spinlock gets release it could
be that multiple new writequeue page buffers were allocated instead of
allocate one writequeue page buffer and other waiters will use remaining
buffer of it. It will only be the case for sleepable context which is
the common case. In non-sleepable contexts like retransmission we just
don't care about such behaviour.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds a generic connect function for TCP and SCTP. If the
connect functionality differs from each other additional callbacks in
dlm_proto_ops were added. The sockopts callback handling will guarantee
that sockets created by connect() will use the same options as sockets
created by accept().
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds a "for now" better handling of missing SCTP support in
the kernel and try to load the sctp module if SCTP is set.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch combines each transport layer listen functionality into one
listen function. Per transport layer differences are provided by
additional callbacks in dlm_proto_ops.
This patch drops silently sock_set_keepalive() for listen tcp sockets
only. This socket option is not set at connecting sockets, I also don't
see the sense of set keepalive for sockets which are created by accept()
only.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch moves the per transport socket callbacks to a static const
array. We can support only one transport socket for the init namespace
which will be determinted by reading the dlm config at lowcomms_start().
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch introduce a function to determine if something is ready to
being send in the writequeue. It's not just that the writequeue is not
empty additional the first entry need to have a valid length field.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The _send_rcom() can be removed and we call directly dlm_rcom_out().
As we doing that we removing the struct dlm_ls parameter which isn't
used.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
If send_to_sock() sets CF_APP_LIMITED limited bit and it has not been
cleared by a waiting lowcomms_write_space() yet and a close_connection()
apprears we should clear the CF_APP_LIMITED bit again because the
connection starts from a new state again at reconnect.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes a small typo in a unused struct field. It should named
be t_pad instead of o_pad. Came over this as I updated wireshark
dissector.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will use READ_ONCE to signal the compiler to read this
variable only one time. If we don't do that it could be that the
compiler read this value more than one time, because some optimizations,
from the configure data which might can be changed during this time.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Instead of dereference "con->sock" we can get the socket structure over
"sk->sk_socket" as well. This patch will switch to this behaviour.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will evaluate the message length if a dlm opts header can fit
in before accessing it if a node lookup fails. The invalid sequence
error means that the version detection failed and an unexpected message
arrived. For debugging such situation the type of arrived message is
important to know.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes a race between mhandle deletion in case of receiving an
acknowledge and flush of all pending mhandle in cases of an timeout or
resetting node states.
Fixes: 489d8e559c ("fs: dlm: add reliable connection if reconnect")
Reported-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch renames DEFAULT_BUFFER_SIZE to DLM_MAX_SOCKET_BUFSIZE and
LOWCOMMS_MAX_TX_BUFFER_LEN to DLM_MAX_APP_BUFSIZE as they are proper
names to define what's behind those values. The DLM_MAX_SOCKET_BUFSIZE
defines the maximum size of buffer which can be handled on socket layer,
the DLM_MAX_APP_BUFSIZE defines the maximum size of buffer which can be
handled by the DLM application layer.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Currently the dlm protocol values are that TCP is 0 and everything else
is SCTP. This makes it difficult to introduce possible other transport
layers. The only one user space tool dlm_controld, which I am aware of,
handles the protocol value 1 for SCTP. We change it now to handle SCTP
as 1, this will break user space API but it will fix it so we can add
possible other transport layers.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch checks if possible allowing new connections is allowed before
queueing the listen socket to accept new connections.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The proper way to allocate ordered workqueues is to use
alloc_ordered_workqueue() function. The current way implies an ordered
workqueue which is also required by dlm.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes the error path handling in lowcomms_start(). We need to
cleanup some static allocated data structure and cleanup possible
workqueue if these have started.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
There are spelling mistake in log messages. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Teigland <teigland@redhat.com>
There is an error return path that is not kfree'ing mh after
it has been successfully allocates. Fix this by moving the
call to create_rcom to after the check on rc_in->rc_id check
to avoid this.
Thanks to Alexander Ahring Oder Aring for suggesting the
correct way to fix this.
Addresses-Coverity: ("Resource leak")
Fixes: a070a91cf1 ("fs: dlm: add more midcomms hooks")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will clean a dirty page buffer if a reconnect occurs. If a page
buffer was half transmitted we cannot start inside the middle of a dlm
message if a node connects again. I observed invalid length receptions
errors and was guessing that this behaviour occurs, after this patch I
never saw an invalid message length again. This patch might drops more
messages for dlm version 3.1 but 3.1 can't deal with half messages as
well, for 3.2 it might trigger more re-transmissions but will not leave dlm
in a broken state.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds functionality to debug midcomms per connection state
inside a comms directory which is similar like dlm configfs. Currently
there exists the possibility to read out two attributes which is the
send queue counter and the version of each midcomms node state.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch introduce to make a tcp lowcomms connection reliable even if
reconnects occurs. This is done by an application layer re-transmission
handling and sequence numbers in dlm protocols. There are three new dlm
commands:
DLM_OPTS:
This will encapsulate an existing dlm message (and rcom message if they
don't have an own application side re-transmission handling). As optional
handling additional tlv's (type length fields) can be appended. This can
be for example a sequence number field. However because in DLM_OPTS the
lockspace field is unused and a sequence number is a mandatory field it
isn't made as a tlv and we put the sequence number inside the lockspace
id. The possibility to add optional options are still there for future
purposes.
DLM_ACK:
Just a dlm header to acknowledge the receive of a DLM_OPTS message to
it's sender.
DLM_FIN:
This provides a 4 way handshake for connection termination inclusive
support for half-closed connections. It's provided on application layer
because SCTP doesn't support half-closed sockets, the shutdown() call
can interrupted by e.g. TCP resets itself and a hard logic to implement
it because the othercon paradigm in lowcomms. The 4-way termination
handshake also solve problems to synchronize peer EOF arrival and that
the cluster manager removes the peer in the node membership handling of
DLM. In some cases messages can be still transmitted in this time and we
need to wait for the node membership event.
To provide a reliable connection the node will retransmit all
unacknowledges message to it's peer on reconnect. The receiver will then
filtering out the next received message and drop all messages which are
duplicates.
As RCOM_STATUS and RCOM_NAMES messages are the first messages which are
exchanged and they have they own re-transmission handling, there exists
logic that these messages must be first. If these messages arrives we
store the dlm version field. This handling is on DLM 3.1 and after this
patch 3.2 the same. A backwards compatibility handling has been added
which seems to work on tests without tcpkill, however it's not recommended
to use DLM 3.1 and 3.2 at the same time, because DLM 3.2 tries to fix long
term bugs in the DLM protocol.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds union inside the lockspace id to handle it also for
another use case for a different dlm command.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch moves out some lowcomms hash functionality into lowcomms
header to provide them to other layers like midcomms as well.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch introduces a retransmit functionality for a lowcomms message
handle. It's just allocates a new buffer and transmit it again, no
special handling about prioritize it because keeping bytestream in order.
To avoid another connection look some refactor was done to make a new
buffer allocation with a preexisting connection pointer.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch makes the void pointer handle for lowcomms functionality per
message and not per page allocation entry. A refcount handling for the
handle was added to keep the message alive until the user doesn't need
it anymore.
There exists now a per message callback which will be called when
allocating a new buffer. This callback will be guaranteed to be called
according the order of the sending buffer, which can be used that the
caller increments a sequence number for the dlm message handle.
For transition process we cast the dlm_mhandle to dlm_msg and vice versa
until the midcomms layer will implement a specific dlm_mhandle structure.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch prepares hooks to redirect to the midcomms layer which will
be used by the midcomms re-transmit handling.
There exists the new concept of stateless buffers allocation and
commits. This can be used to bypass the midcomms re-transmit handling. It
is used by RCOM_STATUS and RCOM_NAMES messages, because they have their
own ping-like re-transmit handling. As well these two messages will be
used to determine the DLM version per node, because these two messages
are per observation the first messages which are exchanged.
Cluster manager events for node membership are added to add support for
half-closed connections in cases that the peer connection get to
an end of file but DLM still holds membership of the node. In
this time DLM can still trigger new message which we should allow. After
the cluster manager node removal event occurs it safe to close the
connection.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch allows to use header_out() and header_in() outside of dlm
util functionality.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes the EOF handling for TCP that if and EOF is received we
will close the socket next time the writequeue runs empty. This is a
half-closed socket functionality which doesn't exists in SCTP. The
midcomms layer will do a half closed socket functionality on DLM side to
solve this problem for the SCTP case. However there is still the last ack
flying around but other reset functionality will take care of it if it got
lost.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
These rx tx flags arguments are for signaling close_connection() from
which worker they are called. Obviously the receive worker cannot cancel
itself and vice versa for swork. For the othercon the receive worker
should only be used, however to avoid deadlocks we should pass the same
flags as the original close_connection() was called.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will change the reconnect handling that if an error occurs
if a socket error callback is occurred. This will also handle reconnects
in a non blocking connecting case which is currently missing. If error
ECONNREFUSED is reported we delay the reconnect by one second.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
There is a is othercon flag which is never used, this patch will set it
and printout a warning if the othercon ever sends a dlm message which
should never be the case.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch holds the srcu connection read lock in cases where we lookup
the connections and accessing it. We don't hold the srcu lock in workers
function where the scheduled worker is part of the connection itself.
The connection should not be freed if any worker is scheduled or
pending.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch add ratelimit macro to dlm subsystem and will set the
connecting log message to ratelimit. In non blocking connecting cases it
will print out this message a lot.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes the ping_members() result that we always run
complete() for possible waiters. We handle the -EINTR error code as
successful. This error code is returned if the recovery is stopped which
is likely that a new recovery is triggered with a new members
configuration and ping_members() runs again.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Add the missing unlock before return from accept_from_sock()
in the error handling case.
Fixes: 6cde210a97 ("fs: dlm: add helper for init connection")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes the flushing of send work before shutdown. The function
cancel_work_sync() is not the right workqueue functionality to use here
as it would cancel the work if the work queues itself. In cases of
EAGAIN in send() for dlm message we need to be sure that everything is
send out before. The function flush_work() will ensure that every send
work is be done inclusive in EAGAIN cases.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes unaligned memory access handling for receiving
midcomms messages. This handling will not fix the unaligned memory
access in general. All messages should be length aligned to 8 bytes,
there exists cases where this isn't the case. It's part of the sending
handling to not send such messages. As the sending handling itself, with
the internal allocator of page buffers, can occur in unaligned memory
access of dlm message fields we just ignore that problem for now as it
seems this code is used by architecture which can handle it.
This patch adds a comment to take care about that problem in a major
bump of dlm protocol.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds an additional check for minimum dlm header size which is
an invalid dlm message and signals a broken stream. A msglen field cannot
be less than the dlm header size because the field is inclusive header
lengths.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch cleans up the current dlm sending allocator handling by using
some named macros, list functionality and removes some goto statements.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch uses GFP_ZERO for allocate a page for the internal dlm
sending buffer allocator instead of calling memset zero after every
allocation. An already allocated space will never be reused again.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
While running tcpkill I experienced invalid header length values while
receiving to check that a node doesn't try to send a invalid dlm message
we also check on applications minimum allocation limit. Also use
DEFAULT_BUFFER_SIZE as maximum allocation limit. The define
LOWCOMMS_MAX_TX_BUFFER_LEN is to calculate maximum buffer limits on
application layer, future midcomms layer will subtract their needs from
this define.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds checks for dlm config attributes regarding to protocol
parameters as it makes only sense to change them when dlm is not running.
It also adds a check for valid protocol specifiers and return invalid
argument if they are not supported.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This allows to return individual errno values for the config attribute
check callback instead of returning invalid argument only.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch sets the lockdep subclass for the othercon socket mutex. In
various places the connection socket mutex is held while locking the
othercon socket mutex. This patch will remove lockdep warnings when such
case occurs.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch sets the CF_CONNECTED bit when dlm accepts a connection from
another node. If we don't set this bit, next time if the connection
socket gets writable it will assume an event that the connection is
successfully connected. However that is only the case when the
connection did a connect.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes an deadlock issue when dlm_lowcomms_close() is called.
When dlm_lowcomms_close() is called the clusters_root.subsys.su_mutex is
held to remove configfs items. At this time we flushing (e.g.
cancel_work_sync()) the workers of send and recv workqueue. Due the fact
that we accessing configfs items (mark values), these workers will lock
clusters_root.subsys.su_mutex as well which are already hold by
dlm_lowcomms_close() and ends in a deadlock situation.
[67170.703046] ======================================================
[67170.703965] WARNING: possible circular locking dependency detected
[67170.704758] 5.11.0-rc4+ #22 Tainted: G W
[67170.705433] ------------------------------------------------------
[67170.706228] dlm_controld/280 is trying to acquire lock:
[67170.706915] ffff9f2f475a6948 ((wq_completion)dlm_recv){+.+.}-{0:0}, at: __flush_work+0x203/0x4c0
[67170.708026]
but task is already holding lock:
[67170.708758] ffffffffa132f878 (&clusters_root.subsys.su_mutex){+.+.}-{3:3}, at: configfs_rmdir+0x29b/0x310
[67170.710016]
which lock already depends on the new lock.
The new behaviour adds the mark value to the node address configuration
which doesn't require to held the clusters_root.subsys.su_mutex by
accessing mark values in a separate datastructure. However the mark
values can be set now only after a node address was set which is the
case when the user is using dlm_controld.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes the following message which randomly pops up during
glocktop call:
seq_file: buggy .next function table_seq_next did not update position index
The issue is that seq_read_iter() in fs/seq_file.c also needs an
increment of the index in an non next record case as well which this
patch fixes otherwise seq_read_iter() will print out the above message.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch checks if we add twice the same address to a per node address
array. This should never be the case and we report -EEXIST to the user
space.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch just constify some function parameter which should be have a
read access only.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will use the runtime array size dlm_local_count variable
to check the actual size of the dlm_local_addr array. There exists
currently a cleanup bug, because the tcp_listen_for_all() functionality
might check on a dangled pointer.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch introduces a own connection structure for the listen socket
handling instead of handling the listen socket as normal connection
structure in the connection hash. We can remove some nodeid equals zero
validation checks, because this nodeid should not exists anymore inside
the node hash. This patch also removes the sock mutex in
accept_from_sock() function because this function can't occur in another
parallel context if it's scheduled on only one workqueue.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch refactors sctp_bind_addrs() to work with a socket parameter
instead of a connection parameter.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch move the assignment for the shutdown action callback to the
node creation functionality.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch moves the assignment for the connect callback to the node
creation instead of assign some dummy functionality. The assignment
which connect functionality will be used will be detected according to
the configfs setting.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will move the connection structure initialization into an
own function. This avoids cases to update the othercon initialization.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The manpage of connect shows that in non blocked mode a writeability
indicates successful connection event. This patch is handling this event
inside the writeability callback. In case of SCTP we use blocking
connect functionality which indicates a successful connect when the
function returns with a successful return value.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch ensures we also flush the othercon writequeue when a lowcomms
close occurs.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds an error handling to the get buffer functionality if the
user is requesting a buffer length which is more than possible of
the internal buffer allocator. This should never happen because specific
handling decided by compile time, but will warn if somebody forget about
to handle this limitation right.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will set the maximum transmit buffer size for rcom messages
with "names" to 4096 bytes. It's a leftover change of
commit 4798cbbfbd ("fs: dlm: rework receive handling"). Fact is that we
cannot allocate a contiguous transmit buffer length above of 4096 bytes.
It seems at some places the upper layer protocol will calculate according
to dlm_config.ci_buffer_size the possible payload of a dlm recovery
message. As compiler setting we will use now the maximum possible
message which dlm can send out. Commit 4e192ee68e ("fs: dlm: disallow
buffer size below default") disallow a buffer setting smaller than the
4096 bytes and above 4096 bytes is definitely wrong because we will then
write out of buffer space as we cannot allocate a contiguous buffer above
4096 bytes. The ci_buffer_size is still there to define the possible
maximum receive buffer size of a recvmsg() which should be at least the
maximum possible dlm message size.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will use call_srcu() instead of call_rcu() because the
related datastructure resource are handled under srcu context. I assume
the current code is fine anyway since free_conn() must be called when
the related resource are not in use otherwise. However it will correct
the overall handling in a srcu context.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Add redirect_neigh() BPF packet redirect helper, allowing to limit stack
traversal in common container configs and improving TCP back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
Expand netlink policy support and improve policy export to user space.
(Ge)netlink core performs request validation according to declared
policies. Expand the expressiveness of those policies (min/max length
and bitmasks). Allow dumping policies for particular commands.
This is used for feature discovery by user space (instead of kernel
version parsing or trial and error).
Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge.
Allow more than 255 IPv4 multicast interfaces.
Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
In Multi-patch TCP (MPTCP) support concurrent transmission of data
on multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
Support SMC-Dv2 version of SMC, which enables multi-subnet deployments.
Allow more calls to same peer in RxRPC.
Support two new Controller Area Network (CAN) protocols -
CAN-FD and ISO 15765-2:2016.
Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
Add TC actions for implementing MPLS L2 VPNs.
Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary notifications
and make it easier to offload nexthops into HW by converting
to a blocking notifier.
Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific
TCP option use.
Reorganize TCP congestion control (CC) initialization to simplify life
of TCP CC implemented in BPF.
Add support for shipping BPF programs with the kernel and loading them
early on boot via the User Mode Driver mechanism, hence reusing all the
user space infra we have.
Support sleepable BPF programs, initially targeting LSM and tracing.
Add bpf_d_path() helper for returning full path for given 'struct path'.
Make bpf_tail_call compatible with bpf-to-bpf calls.
Allow BPF programs to call map_update_elem on sockmaps.
Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
Support listing and getting information about bpf_links via the bpf
syscall.
Enhance kernel interfaces around NIC firmware update. Allow specifying
overwrite mask to control if settings etc. are reset during update;
report expected max time operation may take to users; support firmware
activation without machine reboot incl. limits of how much impact
reset may have (e.g. dropping link or not).
Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
Adopt or extend devlink use for debug, monitoring, fw update
in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw,
mv88e6xxx, dpaa2-eth).
In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
Add XDP support for Intel's igb driver.
Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
Improve performance for packets which don't require much offloads
on recent Mellanox NICs by 20% by making multiple packets share
a descriptor entry.
Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto
subtree to drivers/net. Move MDIO drivers out of the phy directory.
Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bc1U
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).
- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.
- Allow more than 255 IPv4 multicast interfaces.
- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.
- Allow more calls to same peer in RxRPC.
- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.
- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
- Add TC actions for implementing MPLS L2 VPNs.
- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.
- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.
- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.
- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.
- Support sleepable BPF programs, initially targeting LSM and tracing.
- Add bpf_d_path() helper for returning full path for given 'struct
path'.
- Make bpf_tail_call compatible with bpf-to-bpf calls.
- Allow BPF programs to call map_update_elem on sockmaps.
- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
- Support listing and getting information about bpf_links via the bpf
syscall.
- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).
- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).
- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
- Add XDP support for Intel's igb driver.
- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.
- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.
- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...
This set continues the ongoing rework of the low level
communication layer in the dlm. The focus here is on
improvements to connection handling, and reworking the
receiving of messages.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJfhJylAAoJEDgbc8f8gGmqiRYP/R8rHeiAtBuTQebIG2S2FRjT
OoCsr6F240SxyNJYAJlsV4kWGLtRQ0qnHhWku6nAreg9Yw/+0C7ZRHwDNoJsE2/9
JuCW6HhqN6jYcWWhV3BZA7wvWzPfzdC7Jnla7f9GGB9ToFlani7CLEj5qzkyEIxh
KaXfFGTHBCftM20HaNcExqBwmB0bn7jiavlR2Nqnsh/FW+er1HPa4rIIJqYy6k31
ymf0XJ3kZYgf/I4iArUZkR7FKHHy1GhWW10NSQ/DDfwGtkbQ1Lw8IdBZ/zkyheAG
aInFcxEt+hQPTMOBSB4hJn4+QPvyNAd9UxjFLuaHawUNglH73PXBk77kGgj8xJGU
qRcaugX5brVV1tpY2UPQO8MC8ITadmKRa7uZkRoI2hIZfsZO2z+TSgRkegsSDIlD
wXYLQslSYImZ5k42wHqaONxD4nW/haZxdrhul4sP8Z1+d5WmoPE1UDlXMTvbyp/N
iW3+jhvPc1NAyzEPdmMj/y7zmCX+yrlkRrO1YjTkpEOIpN5uUaxg/1g8ok5OProR
Xyx4b9gv3r8/3CGQvYTOiNr9ZUj8kPR8rWv4fbQXAt+kQMAKnIjyRKp4SpfFlp1L
pKv9UU/sdUsduCoiRDD5+SiqNLGDWSH5UAkYvkH0cz3QDELSEYkLlMA6O00QsDAH
o1f+TFcNFKsphk47DXVo
=/n6H
-----END PGP SIGNATURE-----
Merge tag 'dlm-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This set continues the ongoing rework of the low level communication
layer in the dlm.
The focus here is on improvements to connection handling, and
reworking the receiving of messages"
* tag 'dlm-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
fs: dlm: fix race in nodeid2con
fs: dlm: rework receive handling
fs: dlm: disallow buffer size below default
fs: dlm: handle range check as callback
fs: dlm: fix mark per nodeid setting
fs: dlm: remove lock dependency warning
fs: dlm: use free_con to free connection
fs: dlm: handle possible othercon writequeues
fs: dlm: move free writequeue into con free
fs: dlm: fix configfs memory leak
fs: dlm: fix dlm_local_addr memory leak
fs: dlm: make connection hash lockless
fs: dlm: synchronize dlm before shutdown
Bulk of the genetlink users can use smaller ops, move them.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes a race in nodeid2con in cases that we parallel running
a lookup and both will create a connection structure for the same nodeid.
It's a rare case to create a new connection structure to keep reader
lockless we just do a lookup inside the protection area again and drop
previous work if this race happens.
Fixes: a47666eb76 ("fs: dlm: make connection hash lockless")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch reworks the current receive handling of dlm. As I tried to
change the send handling to fix reorder issues I took a look into the
receive handling and simplified it, it works as the following:
Each connection has a preallocated receive buffer with a minimum length of
4096. On receive, the upper layer protocol will process all dlm message
until there is not enough data anymore. If there exists "leftover" data at
the end of the receive buffer because the dlm message wasn't fully received
it will be copied to the begin of the preallocated receive buffer. Next
receive more data will be appended to the previous "leftover" data and
processing will begin again.
This will remove a lot of code of the current mechanism. Inside the
processing functionality we will ensure with a memmove() that the dlm
message should be memory aligned. To have a dlm message always started
at the beginning of the buffer will reduce some amount of memmove()
calls because src and dest pointers are the same.
The cluster attribute "buffer_size" becomes a new meaning, it's now the
size of application layer receive buffer size. If this is changed during
runtime the receive buffer will be reallocated. It's important that the
receive buffer size has at minimum the size of the maximum possible dlm
message size otherwise the received message cannot be placed inside
the receive buffer size.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
I observed that the upper layer will not send messages above this value.
As conclusion the application receive buffer should not below that
value, otherwise we are not capable to deliver the dlm message to the
upper layer. This patch forbids to set the receive buffer below the
maximum possible dlm message size.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds a callback to CLUSTER_ATTR macro to allow individual
callbacks for attributes which might have a more complex attribute range
checking just than non zero.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes to set per nodeid mark configuration for accepted
sockets as well. Before this patch only the listen socket mark value was
used for all accepted connections. This patch will ensure that the
cluster mark attribute value will be always used for all sockets, if a
per nodeid mark value is specified dlm will use this value for the
specific node.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
During my experiments to make dlm robust against tcpkill application I
was able to run sometimes in a circular lock dependency warning between
clusters_root.subsys.su_mutex and con->sock_mutex. We don't need to
held the sock_mutex when getting the mark value which held the
clusters_root.subsys.su_mutex. This patch moves the specific handling
just before the sock_mutex will be held.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch use free_con() functionality to free the listen connection if
listen fails. It also fixes an issue that a freed resource is still part
of the connection_hash as hlist_del() is not called in this case. The
only difference is that free_con() handles othercon as well, but this is
never been set for the listen connection.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds free of possible other writequeue entries in othercon
member of struct connection.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch just move the free of struct connection member writequeue
into the functionality when struct connection will be freed instead of
doing two iterations.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes the following memory detected by kmemleak and umount
gfs2 filesystem which removed the last lockspace:
unreferenced object 0xffff9264f482f600 (size 192):
comm "dlm_controld", pid 325, jiffies 4294690276 (age 48.136s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 6e 6f 64 65 73 00 00 00 ........nodes...
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000060481d7>] make_space+0x41/0x130
[<000000008d905d46>] configfs_mkdir+0x1a2/0x5f0
[<00000000729502cf>] vfs_mkdir+0x155/0x210
[<000000000369bcf1>] do_mkdirat+0x6d/0x110
[<00000000cc478a33>] do_syscall_64+0x33/0x40
[<00000000ce9ccf01>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
The patch just remembers the "nodes" entry pointer in space as I think
it's created as subdirectory when parent "spaces" is created. In
function drop_space() we will lost the pointer reference to nds because
configfs_remove_default_groups(). However as this subdirectory is always
available when "spaces" exists it will just be freed when "spaces" will be
freed.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
There are some problems with the connections_lock. During my
experiements I saw sometimes circular dependencies with sock_lock.
The reason here might be code parts which runs nodeid2con() before
or after sock_lock is acquired.
Another issue are missing locks in for_conn() iteration. Maybe this
works fine because for_conn() is running in a context where
connection_hash cannot be manipulated by others anymore.
However this patch changes the connection_hash to be protected by
sleepable rcu. The hotpath function __find_con() is implemented
lockless as it is only a reader of connection_hash and this hopefully
fixes the circular locking dependencies. The iteration for_conn() will
still call some sleepable functionality, that's why we use sleepable rcu
in this case.
This patch removes the kmemcache functionality as I think I need to
make some free() functionality via call_rcu(). However allocation time
isn't here an issue. The dlm_allow_con will not be protected by a lock
anymore as I think it's enough to just set and flush workqueues
afterwards.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch moves the dlm workqueue dlm synchronization before shutdown
handling. The patch just flushes all pending work before starting to
shutdown the connection. At least for the send_workqeue we should flush
the workqueue to make sure there is no new connection handling going on
as dlm_allow_conn switch is turned to false before.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This set includes a some improvements to the dlm
networking layer: improving the ability to trace
dlm messages for debugging, and improved handling
of bad messages or disrupted connections.
-----BEGIN PGP SIGNATURE-----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=qgti
-----END PGP SIGNATURE-----
Merge tag 'dlm-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This set includes a some improvements to the dlm networking layer:
improving the ability to trace dlm messages for debugging, and
improved handling of bad messages or disrupted connections"
* tag 'dlm-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
fs: dlm: implement tcp graceful shutdown
fs: dlm: change handling of reconnects
fs: dlm: don't close socket on invalid message
fs: dlm: set skb mark per peer socket
fs: dlm: set skb mark for listen socket
net: sock: add sock_set_mark
dlm: Fix kobject memleak
During my code inspection I saw there is no implementation of a graceful
shutdown for tcp. This patch will introduce a graceful shutdown for tcp
connections. The shutdown is implemented synchronized as
dlm_lowcomms_stop() is called to end all dlm communication. After shutdown
is done, a lot of flush and closing functionality will be called. However
I don't see a problem with that.
The waitqueue for synchronize the shutdown has a timeout of 10 seconds, if
timeout a force close will be exectued.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes the handling of reconnects. At first we only close
the connection related to the communication failure. If we get a new
connection for an already existing connection we close the existing
connection and take the new one.
This patch improves significantly the stability of tcp connections while
running "tcpkill -9 -i $IFACE port 21064" while generating a lot of dlm
messages e.g. on a gfs2 mount with many files. My test setup shows that a
deadlock is "more" unlikely. Before this patch I wasn't able to get
not a deadlock after 5 seconds. After this patch my observation is
that it's more likely to survive after 5 seconds and more, but still a
deadlock occurs after certain time. My guess is that there are still
"segments" inside the tcp writequeue or retransmit queue which get dropped
when receiving a tcp reset [1]. Hard to reproduce because the right message
need to be inside these queues, which might even be in the 5 first seconds
with this patch.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/net/ipv4/tcp_input.c?h=v5.8-rc6#n4122
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch doesn't close sockets when there is an invalid dlm message
received. The connection will probably reconnect anyway so. To not
close the connection will reduce the number of possible failtures.
As we don't have a different strategy to react on such scenario
just keep going the connection and ignore the message.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds support to set the skb mark value for the DLM tcp and
sctp socket per peer. The mark value will be offered as per comm value
of configfs. At creation time of the peer socket it will be set as
socket option.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds support to set the skb mark value for the DLM listen
tcp and sctp sockets. The mark value will be offered as cluster
configuration. At creation time of the listen socket it will be set as
socket option.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Currently the error return path from kobject_init_and_add() is not
followed by a call to kobject_put() - which means we are leaking
the kobject.
Set do_unreg = 1 before kobject_init_and_add() to ensure that
kobject_put() can be called in its error patch.
Fixes: 901195ed7f ("Kobject: change GFS2 to use kobject_init_and_add")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
This set includes a couple minor cleanups, and dropping the
interruptible from a wait_event that waits for an event from
the userspace cluster management.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJe2op+AAoJEDgbc8f8gGmqJKkP/jE0BCnE7VbpID0sDaBLpntk
+v53jxR/bpw6g+LwlJGBDLCRrcn8MnhC72W1OPZyFJ4AiuN5BHdvTVVSPSCBSHnU
WfJKqbVSRt+PRaATJd8iCLdoMj858vLWFo380XVMTRsAaxYJ4dwRUMBUOx/pL8Dy
pcDXDgWTC06nuRmSY8eYJYJWX3c6SdpHHbg4IA127Y9oTjIAvYyeFC4ohRtRJqrj
bQlpjnfJ9bNwd5N15turGiR5IzY7UXI9wa/qylngr5B5gVxJttFpaE4OFF80HOkY
Xxqqqhi9dIcyAAzftJaRQpyAq6kRmFgFAjH5Rvx+7n0BEMe+AAhQC9Coei1Zysh1
fssYrxRC3fqX1kg2alhpdBdCugFq7IUdFuwH044M+w8jcsoggGq8vGRMJEuKgnnm
kLLBEi5HtAv0S9rAE9Acnqanc6lRvzJIc0vysG/0LQqzWr+F7HtRnS7kkOkO2+e1
014k20FmooJiu5XGrCz+dvmnIACpr6Z+S119uXntYGDDA+YGcJQTMs6pzLh5UTqB
40aIZPPRRj6K/Vvx2VJgEbzwmwWjjdtsYkcJEq+QPPsAkPa8EnbqICCyJDkUuY5K
kltYHQ2IOa466KC8JHBS9jdVnHftk0jIl75eiP7vK+ZUEW+iwRgEXY11oiWeY23J
EKfPgi0oikfmlj2Y3jme
=VTRw
-----END PGP SIGNATURE-----
Merge tag 'dlm-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This set includes a couple minor cleanups, and dropping the
interruptible from a wait_event that waits for an event from the
userspace cluster management"
* tag 'dlm-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: remove BUG() before panic()
dlm: Switch to using wait_event()
fs:dlm:remove unneeded semicolon in rcom.c
dlm: user: Replace zero-length array with flexible-array member
dlm: dlm_internal: Replace zero-length array with flexible-array member
The SCTP protocol allows to bind multiple address to a socket. That
feature is currently only exposed as a socket option. Add a bind_add
method struct proto that allows to bind additional addresses, and
switch the dlm code to use the method instead of going through the
socket option from kernel space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a helper to directly set the SCTP_NODELAY sockopt from kernel space
without going through a fake uaccess.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a helper to directly set the TCP_NODELAY sockopt from kernel space
without going through a fake uaccess. Cleanup the callers to avoid
pointless wrappers now that this is a simple function call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a helper to directly set the SO_RCVBUFFORCE sockopt from kernel space
without going through a fake uaccess.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a helper to directly set the SO_KEEPALIVE sockopt from kernel space
without going through a fake uaccess.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a helper to directly set the SO_SNDTIMEO_NEW sockopt from kernel
space without going through a fake uaccess. The interface is
simplified to only pass the seconds value, as that is the only
thing needed at the moment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a helper to directly set the SO_REUSEADDR sockopt from kernel space
without going through a fake uaccess.
For this the iscsi target now has to formally depend on inet to avoid
a mostly theoretical compile failure. For actual operation it already
did depend on having ipv4 or ipv6 support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
The only difference between a few missing fixes applied to the SCTP
one is that TCP uses ->getpeername to get the remote address, while
SCTP uses kernel_getsockopt(.. SCTP_PRIMARY_ADDR). But given that
getpeername is defined to return the primary address for sctp, there
doesn't seem to be any reason for the different way of quering the
peername, or all the code duplication.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Building a kernel with clang sometimes fails with an objtool error in dlm:
fs/dlm/lock.o: warning: objtool: revert_lock_pc()+0xbd: can't find jump dest instruction at .text+0xd7fc
The problem is that BUG() never returns and the compiler knows
that anything after it is unreachable, however the panic still
emits some code that does not get fully eliminated.
Having both BUG() and panic() is really pointless as the BUG()
kills the current process and the subsequent panic() never hits.
In most cases, we probably don't really want either and should
replace the DLM_ASSERT() statements with WARN_ON(), as has
been done for some of them.
Remove the BUG() here so the user at least sees the panic message
and we can reliably build randconfig kernels.
Fixes: e7fd41792f ("[DLM] The core of the DLM for GFS2/CLVM")
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: clang-built-linux@googlegroups.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Teigland <teigland@redhat.com>
We saw an issue in a production server on a customer deployment where
DLM 4.0.7 gets "stuck" and unable to join new lockspaces.
There is no useful response for the dlm in do_event() if
wait_event_interruptible() is interrupted, so switch to
wait_event().
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Fix the following coccicheck warning:
fs/dlm/rcom.c:566:2-3: Unneeded semicolon
Signed-off-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Eliminate one more use of 'struct timeval' from the kernel so
we can eventually remove the definition as well.
The kernel supports the new format with a 64-bit time_t version
of timeval here, so use that instead of the old timeval.
Acked-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This set removes some unnecessary debugfs error handling, and
checks that lowcomms workqueues are not NULL before destroying.
-----BEGIN PGP SIGNATURE-----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=Mhya
-----END PGP SIGNATURE-----
Merge tag 'dlm-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This set removes some unnecessary debugfs error handling, and checks
that lowcomms workqueues are not NULL before destroying"
* tag 'dlm-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: no need to check return value of debugfs_create functions
dlm: check if workqueues are NULL before flushing/destroying
Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups. Because of this, there is going
to be some merge issues with your tree at the moment, I'll follow up
with the expected resolutions to make it easier for you.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups (will cause build warnings
with s390 and coresight drivers in your tree)
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse
easier due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of merge
issues that Stephen has been patient with me for. Other than the merge
issues, functionality is working properly in linux-next :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSgpnQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykcwgCfS30OR4JmwZydWGJ7zK/cHqk+KjsAnjOxjC1K
LpRyb3zX29oChFaZkc5a
=XrEZ
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse easier
due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of
merge issues that Stephen has been patient with me for"
* tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits)
debugfs: make error message a bit more verbose
orangefs: fix build warning from debugfs cleanup patch
ubifs: fix build warning after debugfs cleanup patch
driver: core: Allow subsystems to continue deferring probe
drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
arch_topology: Remove error messages on out-of-memory conditions
lib: notifier-error-inject: no need to check return value of debugfs_create functions
swiotlb: no need to check return value of debugfs_create functions
ceph: no need to check return value of debugfs_create functions
sunrpc: no need to check return value of debugfs_create functions
ubifs: no need to check return value of debugfs_create functions
orangefs: no need to check return value of debugfs_create functions
nfsd: no need to check return value of debugfs_create functions
lib: 842: no need to check return value of debugfs_create functions
debugfs: provide pr_fmt() macro
debugfs: log errors when something goes wrong
drivers: s390/cio: Fix compilation warning about const qualifiers
drivers: Add generic helper to match by of_node
driver_find_device: Unify the match function with class_find_device()
bus_find_device: Unify the match callback with class_find_device
...
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Teigland <teigland@redhat.com>
If the DLM lowcomms stack is shut down before any DLM
traffic can be generated, flush_workqueue() and
destroy_workqueue() can be called on empty send and/or recv
workqueues.
Insert guard conditionals to only call flush_workqueue()
and destroy_workqueue() on workqueues that are not NULL.
Signed-off-by: David Windsor <dwindsor@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The kobj_type default_attrs field is being replaced by the
default_groups field, so replace the default_attrs field in dlm_ktype
with default_groups. Use the ATTRIBUTE_GROUPS macro to create
dlm_groups.
Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this copyrighted material is made available to anyone wishing to use
modify copy or redistribute it subject to the terms and conditions
of the gnu general public license version 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 44 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531081038.653000175@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this copyrighted material is made available to anyone wishing to use
modify copy or redistribute it subject to the terms and conditions
of the gnu general public license v 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 45 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170027.342746075@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add options to strictly validate messages and dump messages,
sometimes perhaps validating dump messages non-strictly may
be required, so add an option for that as well.
Since none of this can really be applied to existing commands,
set the options everwhere using the following spatch:
@@
identifier ops;
expression X;
@@
struct genl_ops ops[] = {
...,
{
.cmd = X,
+ .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
...
},
...
};
For new commands one should just not copy the .validate 'opt-out'
flags and thus get strict validation.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SO_RCVTIMEO and SO_SNDTIMEO socket options use struct timeval
as the time format. struct timeval is not y2038 safe.
The subsequent patches in the series add support for new socket
timeout options with _NEW suffix that will use y2038 safe
data structures. Although the existing struct timeval layout
is sufficiently wide to represent timeouts, because of the way
libc will interpret time_t based on user defined flag, these
new flags provide a way of having a structure that is the same
for all architectures consistently.
Rename the existing options with _OLD suffix forms so that the
right option is enabled for userspace applications according
to the architecture and time_t definition of libc.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Cc: ccaulfie@redhat.com
Cc: deller@gmx.de
Cc: paulus@samba.org
Cc: ralf@linux-mips.org
Cc: rth@twiddle.net
Cc: cluster-devel@redhat.com
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-alpha@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
The warning added in commit 3b0e761ba8
"dlm: print log message when cluster name is not set"
did not account for the fact that lockspaces created
from userland do not supply a cluster name, so bogus
warnings are printed every time a userland lockspace
is created.
Signed-off-by: David Teigland <teigland@redhat.com>
NULL check before some freeing functions is not needed.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: David Teigland <teigland@redhat.com>
kmem_cache_destroy(NULL) is safe, so removes NULL check before
freeing the mem. This patch also fix ifnullfree.cocci warnings.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Signed-off-by: David Teigland <teigland@redhat.com>
According to comment in dlm_user_request() ua should be freed
in dlm_free_lkb() after successful attach to lkb.
However ua is attached to lkb not in set_lock_args() but later,
inside request_lock().
Fixes 597d0cae0f ("[DLM] dlm: user locks")
Cc: stable@kernel.org # 2.6.19
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David Teigland <teigland@redhat.com>
If allocation fails on last elements of array need to free already
allocated elements.
v2: just move existing out_rsbtbl label to right place
Fixes 789924ba635f ("dlm: fix race between remove and lookup")
Cc: stable@kernel.org # 3.6
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Technically dlm_config_nodes() could return error and keep nodes
uninitialized. After that on the fail path of we'll call kfree()
for that uninitialized value.
The patch is simple - we should just initialize nodes with NULL.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David Teigland <teigland@redhat.com>
Alexander Aring