Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As the documentation for dwfl_frame_pc says, frames that
are no activation frames need to have their program counter
decremented by one to properly find the function of the caller.
This fixes many cases where perf report currently attributes
the cost to the next line. I.e. I have code like this:
~~~~~~~~~~~~~~~
#include <thread>
#include <chrono>
using namespace std;
int main()
{
this_thread::sleep_for(chrono::milliseconds(1000));
this_thread::sleep_for(chrono::milliseconds(100));
this_thread::sleep_for(chrono::milliseconds(10));
return 0;
}
~~~~~~~~~~~~~~~
Now compile and record it:
~~~~~~~~~~~~~~~
g++ -std=c++11 -g -O2 test.cpp
echo 1 | sudo tee /proc/sys/kernel/sched_schedstats
perf record \
--event sched:sched_stat_sleep \
--event sched:sched_process_exit \
--event sched:sched_switch --call-graph=dwarf \
--output perf.data.raw \
./a.out
echo 0 | sudo tee /proc/sys/kernel/sched_schedstats
perf inject --sched-stat --input perf.data.raw --output perf.data
~~~~~~~~~~~~~~~
Before this patch, the report clearly shows the off-by-one issue.
Most notably, the last sleep invocation is incorrectly attributed
to the "return 0;" line:
~~~~~~~~~~~~~~~
Overhead Source:Line
........ ...........
100.00% core.c:0
|
---__schedule core.c:0
schedule
do_nanosleep hrtimer.c:0
hrtimer_nanosleep
sys_nanosleep
entry_SYSCALL_64_fastpath .tmp_entry_64.o:0
__nanosleep_nocancel .:0
std::this_thread::sleep_for<long, std::ratio<1l, 1000l> > thread:323
|
|--90.08%--main test.cpp:9
| __libc_start_main
| _start
|
|--9.01%--main test.cpp:10
| __libc_start_main
| _start
|
--0.91%--main test.cpp:13
__libc_start_main
_start
~~~~~~~~~~~~~~~
With this patch here applied, the issue is fixed. The report becomes
much more usable:
~~~~~~~~~~~~~~~
Overhead Source:Line
........ ...........
100.00% core.c:0
|
---__schedule core.c:0
schedule
do_nanosleep hrtimer.c:0
hrtimer_nanosleep
sys_nanosleep
entry_SYSCALL_64_fastpath .tmp_entry_64.o:0
__nanosleep_nocancel .:0
std::this_thread::sleep_for<long, std::ratio<1l, 1000l> > thread:323
|
|--90.08%--main test.cpp:8
| __libc_start_main
| _start
|
|--9.01%--main test.cpp:9
| __libc_start_main
| _start
|
--0.91%--main test.cpp:10
__libc_start_main
_start
~~~~~~~~~~~~~~~
Similarly it works for signal frames:
~~~~~~~~~~~~~~~
__noinline void bar(void)
{
volatile long cnt = 0;
for (cnt = 0; cnt < 100000000; cnt++);
}
__noinline void foo(void)
{
bar();
}
void sig_handler(int sig)
{
foo();
}
int main(void)
{
signal(SIGUSR1, sig_handler);
raise(SIGUSR1);
foo();
return 0;
}
~~~~~~~~~~~~~~~~
Before, the report wrongly points to `signal.c:29` after raise():
~~~~~~~~~~~~~~~~
$ perf report --stdio --no-children -g srcline -s srcline
...
100.00% signal.c:11
|
---bar signal.c:11
|
|--50.49%--main signal.c:29
| __libc_start_main
| _start
|
--49.51%--0x33a8f
raise .:0
main signal.c:29
__libc_start_main
_start
~~~~~~~~~~~~~~~~
With this patch in, the issue is fixed and we instead get:
~~~~~~~~~~~~~~~~
100.00% signal signal [.] bar
|
---bar signal.c:11
|
|--50.49%--main signal.c:29
| __libc_start_main
| _start
|
--49.51%--0x33a8f
raise .:0
main signal.c:27
__libc_start_main
_start
~~~~~~~~~~~~~~~~
Note how this patch fixes this issue for both unwinding methods, i.e.
both dwfl and libunwind. The former case is straight-forward thanks
to dwfl_frame_pc(). For libunwind, we replace the functionality via
unw_is_signal_frame() for any but the very first frame.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-4-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Removing it from util.h, part of an effort to disentangle the includes
hell, that makes changes to util.h or something included by it to cause
a complete rebuild of the tools.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ztrjy52q1rqcchuy3rubfgt2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Needed to use the PRI[xu](32,64) formatting macros.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wkbho8kaw24q67dd11q0j39f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using perf with call graph method dwarf fails to provide backtrace
support for stripped binary even though .gnu_debuglink points to *.dbg
flavor with properly populated debug symbols.
Problem is reproduced on ARM (v7, v8), kernels 3.14.y, 4.4.y and
4.10.rc3. Perf is configured with libunwind, and unwind dwarf support
[1]. Test code (stress_bt.c) can be found on [2].
Running (explicitly disable other unwinding methods):
$ gcc -g -o stress_bt -fomit-frame-pointer -fno-unwind-tables \
-fno-asynchronous-unwind-tables stress_bt.c
$ perf record -N --call-graph dwarf ./stress_bt
$ perf report
results in properly generated call graph. Stripping the binary and running
it results with missing call graph. Expected result is to have call graph:
$ gcc -g -o stress_bt -fomit-frame-pointer -fno-unwind-tables \
-fno-asynchronous-unwind-tables stress_bt.c
$ objcopy --only-keep-debug stress_bt stress_bt.dbg
$ objcopy --strip-debug stress_bt
$ objcopy --add-gnu-debuglink=stress_bt.dbg stress_bt
$ perf record -N --call-graph dwarf ./stress_bt
$ perf report
Problem is that perf doesn't try to read symbols pointed by gnu
debuglink. Patch adds checking, and reading of the symbols from
debuglink and symsrc. Order of the check is to first check within dso,
then check whether symsrc is defined and try to read from it. Finally,
debuglink is checked. Default locations of debug files are discussed in
[3] and [4]. Comments on RFC are on [5].
[1] https://wiki.linaro.org/LEG/Engineering/TOOLS/perf-callstack-unwinding
[2] [1]#Backtrace_stress_application
[3] https://sourceware.org/gdb/onlinedocs/gdb/Separate-Debug-Files.html
[4] https://sourceware.org/binutils/docs/binutils/objcopy.html
[5] https://lkml.org/lkml/2016/8/22/473
Signed-off-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/d309d40a-463f-482b-68e1-1465326efdc1@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When calculating .eh_frame_hdr base and LUT offsets do not always assume
that pgoff is zero.
The assumption is false for DSOs built from the jitdump by perf inject,
because the ELF header did not exist in memory at sampling time.
Signed-off-by: Stefano Sanfilippo <ssanfilippo@chromium.org>
Signed-off-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1476356383-30100-6-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use macro name prefixed with "LIBUNWIND_ARCH" for better understanding
that the regs used by callbacks of libunwind are arch specific. The real
regs used should be defined in the wrapper file of
"unwind-libunwind-local.c" for each supported arch.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1466578626-92406-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation for including unwind-libunwind-local.c in other
files for remote libunwind.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-13-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For local libunwind, it uses the fixed methods to convert register id
according to the host platform, but in remote libunwind, this convert
function should be the one for remote architecture. This patch changes
the fixed name to macro and code for each remote platform can be
compiled indivadually.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-12-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch extracts common unwind-libunwind APIs out of
unwind-libunwind-local.c, this part will be used by both local and
remote libunwind.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-9-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since unwind-libunwind.c contains code for specific arithecture, we
change it's name to unwind-libunwind-local.c, and let it only be built
if local libunwind is supported.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-8-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Greg Kroah-Hartman