As long as signing is supported (ie not a guest user connection) and
connection is SMB3 or SMB3.02, then validate negotiate (protect
against man in the middle downgrade attacks). We had been doing this
only when signing was required, not when signing was just enabled,
but this more closely matches recommended SMB3 behavior and is
better security. Suggested by Metze.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Acked-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
There is a race that cause cifs reconnect in cifs_mount,
- cifs_mount
- cifs_get_tcp_session
- [ start thread cifs_demultiplex_thread
- cifs_read_from_socket: -ECONNABORTED
- DELAY_WORK smb2_reconnect_server ]
- cifs_setup_session
- [ smb2_reconnect_server ]
auth_key.response was allocated in cifs_setup_session, and
will release when the session destoried. So when session re-
connect, auth_key.response should be check and released.
Tested with my system:
CIFS VFS: Free previous auth_key.response = ffff8800320bbf80
A simple auth_key.response allocation call trace:
- cifs_setup_session
- SMB2_sess_setup
- SMB2_sess_auth_rawntlmssp_authenticate
- build_ntlmssp_auth_blob
- setup_ntlmv2_rsp
Signed-off-by: Shu Wang <shuwang@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
memory leak was found by kmemleak. exit_cifs_spnego
should be called before cifs module removed, or
cifs root_cred will not be released.
kmemleak report:
unreferenced object 0xffff880070a3ce40 (size 192):
backtrace:
kmemleak_alloc+0x4a/0xa0
kmem_cache_alloc+0xc7/0x1d0
prepare_kernel_cred+0x20/0x120
init_cifs_spnego+0x2d/0x170 [cifs]
0xffffffffc07801f3
do_one_initcall+0x51/0x1b0
do_init_module+0x60/0x1fd
load_module+0x161e/0x1b60
SYSC_finit_module+0xa9/0x100
SyS_finit_module+0xe/0x10
Signed-off-by: Shu Wang <shuwang@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Don't populate the read-only arrays types[] on the stack, instead make
them both static const. Makes the object code smaller by over 200 bytes:
Before:
text data bss dec hex filename
111503 37696 448 149647 2488f fs/cifs/file.o
After:
text data bss dec hex filename
111140 37856 448 149444 247c4 fs/cifs/file.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
We were not displaying some key fields (session status and capabilities and
whether guest authenticated) for SMB2/SMB3 session in /proc/fs/cifs/DebugData.
This is needed for real world triage of problems with the (now much more
common) SMB3 mounts.
Signed-off-by: Steve French <smfrench@gmail.com>
It can be confusing if user ends up authenticated as guest but they
requested signing (server will return error validating signed packets)
so add log message for this.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Multi-dialect negotiate patch had a minor endian error.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org> # 4.13+
Samba rejects SMB3.1.1 dialect (vers=3.1.1) negotiate requests from
the kernel client due to the two byte pad at the end of the negotiate
contexts.
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
The newly added SMB2+ attribute support causes unused function
warnings when CONFIG_CIFS_XATTR is disabled:
fs/cifs/smb2ops.c:563:1: error: 'smb2_set_ea' defined but not used [-Werror=unused-function]
smb2_set_ea(const unsigned int xid, struct cifs_tcon *tcon,
fs/cifs/smb2ops.c:513:1: error: 'smb2_query_eas' defined but not used [-Werror=unused-function]
smb2_query_eas(const unsigned int xid, struct cifs_tcon *tcon,
This adds another #ifdef around the affected functions.
Fixes: 5517554e43 ("cifs: Add support for writing attributes on SMB2+")
Fixes: 95907fea4f ("cifs: Add support for reading attributes on SMB2+")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Steve French <smfrench@gmail.com>
With the need to discourage use of less secure dialect, SMB1 (CIFS),
we temporarily upgraded the dialect to SMB3 in 4.13, but since there
are various servers which only support SMB2.1 (2.1 is more secure
than CIFS/SMB1) but not optimal for a default dialect - add support
for multidialect negotiation. cifs.ko will now request SMB2.1
or later (ie SMB2.1 or SMB3.0, SMB3.02) and the server will
pick the latest most secure one it can support.
In addition since we are sending multidialect negotiate, add
support for secure negotiate to validate that a man in the
middle didn't downgrade us.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org> # 4.13+
In SMB2_open there are several paths where the SendReceive2
call will return an error before it sets rsp_iov.iov_base
thus leaving iov_base uninitialized.
Thus we need to check rsp before we dereference it in
the call to get_rfc1002_length().
A report of this issue was previously reported in
http://www.spinics.net/lists/linux-cifs/msg12846.html
RH-bugzilla : 1476151
Version 2 :
* Lets properly initialize rsp_iov before we use it.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>.
Signed-off-by: Steve French <smfrench@gmail.com>
Reported-by: Xiaoli Feng <xifeng@redhat.com>
CC: Stable <stable@vger.kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+DYj
-----END PGP SIGNATURE-----
Merge tag '4.14-smb3-xattr-enable' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs update from Steve French:
"Enable xattr support for smb3 and also a bugfix"
* tag '4.14-smb3-xattr-enable' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Check for timeout on Negotiate stage
cifs: Add support for writing attributes on SMB2+
cifs: Add support for reading attributes on SMB2+
Merge updates from Andrew Morton:
- various misc bits
- DAX updates
- OCFS2
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (119 commits)
mm,fork: introduce MADV_WIPEONFORK
x86,mpx: make mpx depend on x86-64 to free up VMA flag
mm: add /proc/pid/smaps_rollup
mm: hugetlb: clear target sub-page last when clearing huge page
mm: oom: let oom_reap_task and exit_mmap run concurrently
swap: choose swap device according to numa node
mm: replace TIF_MEMDIE checks by tsk_is_oom_victim
mm, oom: do not rely on TIF_MEMDIE for memory reserves access
z3fold: use per-cpu unbuddied lists
mm, swap: don't use VMA based swap readahead if HDD is used as swap
mm, swap: add sysfs interface for VMA based swap readahead
mm, swap: VMA based swap readahead
mm, swap: fix swap readahead marking
mm, swap: add swap readahead hit statistics
mm/vmalloc.c: don't reinvent the wheel but use existing llist API
mm/vmstat.c: fix wrong comment
selftests/memfd: add memfd_create hugetlbfs selftest
mm/shmem: add hugetlbfs support to memfd_create()
mm, devm_memremap_pages: use multi-order radix for ZONE_DEVICE lookups
mm/vmalloc.c: halve the number of comparisons performed in pcpu_get_vm_areas()
...
Patch series "Ranged pagevec lookup", v2.
In this series I make pagevec_lookup() update the index (to be
consistent with pagevec_lookup_tag() and also as a preparation for
ranged lookups), provide ranged variant of pagevec_lookup() and use it
in places where it makes sense. This not only removes some common code
but is also a measurable performance win for some use cases (see patch
4/10) where radix tree is sparse and searching & grabing of a page after
the end of the range has measurable overhead.
This patch (of 10):
The callback doesn't ever get called. Remove it.
Link: http://lkml.kernel.org/r/20170726114704.7626-2-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=LLY3
-----END PGP SIGNATURE-----
Merge tag 'wberr-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull writeback error handling updates from Jeff Layton:
"This pile continues the work from last cycle on better tracking
writeback errors. In v4.13 we added some basic errseq_t infrastructure
and converted a few filesystems to use it.
This set continues refining that infrastructure, adds documentation,
and converts most of the other filesystems to use it. The main
exception at this point is the NFS client"
* tag 'wberr-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
ecryptfs: convert to file_write_and_wait in ->fsync
mm: remove optimizations based on i_size in mapping writeback waits
fs: convert a pile of fsync routines to errseq_t based reporting
gfs2: convert to errseq_t based writeback error reporting for fsync
fs: convert sync_file_range to use errseq_t based error-tracking
mm: add file_fdatawait_range and file_write_and_wait
fuse: convert to errseq_t based error tracking for fsync
mm: consolidate dax / non-dax checks for writeback
Documentation: add some docs for errseq_t
errseq: rename __errseq_set to errseq_set
-----BEGIN PGP SIGNATURE-----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=VPMU
-----END PGP SIGNATURE-----
Merge tag 'locks-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull file locking updates from Jeff Layton:
"This pile just has a few file locking fixes from Ben Coddington. There
are a couple of cleanup patches + an attempt to bring sanity to the
l_pid value that is reported back to userland on an F_GETLK request.
After a few gyrations, he came up with a way for filesystems to
communicate to the VFS layer code whether the pid should be translated
according to the namespace or presented as-is to userland"
* tag 'locks-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
locks: restore a warn for leaked locks on close
fs/locks: Remove fl_nspid and use fs-specific l_pid for remote locks
fs/locks: Use allocation rather than the stack in fcntl_getlk()
Some servers seem to accept connections while booting but never send
the SMBNegotiate response neither close the connection, causing all
processes accessing the share hang on uninterruptible sleep state.
This happens when the cifs_demultiplex_thread detects the server is
unresponsive so releases the socket and start trying to reconnect.
At some point, the faulty server will accept the socket and the TCP
status will be set to NeedNegotiate. The first issued command accessing
the share will start the negotiation (pid 5828 below), but the response
will never arrive so other commands will be blocked waiting on the mutex
(pid 55352).
This patch checks for unresponsive servers also on the negotiate stage
releasing the socket and reconnecting if the response is not received
and checking again the tcp state when the mutex is acquired.
PID: 55352 TASK: ffff880fd6cc02c0 CPU: 0 COMMAND: "ls"
#0 [ffff880fd9add9f0] schedule at ffffffff81467eb9
#1 [ffff880fd9addb38] __mutex_lock_slowpath at ffffffff81468fe0
#2 [ffff880fd9addba8] mutex_lock at ffffffff81468b1a
#3 [ffff880fd9addbc0] cifs_reconnect_tcon at ffffffffa042f905 [cifs]
#4 [ffff880fd9addc60] smb_init at ffffffffa042faeb [cifs]
#5 [ffff880fd9addca0] CIFSSMBQPathInfo at ffffffffa04360b5 [cifs]
....
Which is waiting a mutex owned by:
PID: 5828 TASK: ffff880fcc55e400 CPU: 0 COMMAND: "xxxx"
#0 [ffff880fbfdc19b8] schedule at ffffffff81467eb9
#1 [ffff880fbfdc1b00] wait_for_response at ffffffffa044f96d [cifs]
#2 [ffff880fbfdc1b60] SendReceive at ffffffffa04505ce [cifs]
#3 [ffff880fbfdc1bb0] CIFSSMBNegotiate at ffffffffa0438d79 [cifs]
#4 [ffff880fbfdc1c50] cifs_negotiate_protocol at ffffffffa043b383 [cifs]
#5 [ffff880fbfdc1c80] cifs_reconnect_tcon at ffffffffa042f911 [cifs]
#6 [ffff880fbfdc1d20] smb_init at ffffffffa042faeb [cifs]
#7 [ffff880fbfdc1d60] CIFSSMBQFSInfo at ffffffffa0434eb0 [cifs]
....
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Aurélien Aptel <aaptel@suse.de>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
This adds support for writing extended attributes on SMB2+ shares.
Attributes can be written using the setfattr command.
RH-bz: 1110709
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
SMB1 already has support to read attributes. This adds similar support
to SMB2+.
With this patch, tools such as 'getfattr' will now work with SMB2+ shares.
RH-bz: 1110709
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
When mounting to older servers, such as Windows XP (or even Windows 7),
the limited error messages that can be passed back to user space can
get confusing since the default dialect has changed from SMB1 (CIFS) to
more secure SMB3 dialect. Log additional information when the user chooses
to use the default dialects and when the server does not support the
dialect requested.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Recent patch had an endian warning ie
cifs: return ENAMETOOLONG for overlong names in cifs_open()/cifs_lookup()
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Currently the maximum size of SMB2/3 header is set incorrectly which
leads to hanging of directory listing operations on encrypted SMB3
connections. Fix this by setting the maximum size to 170 bytes that
is calculated as RFC1002 length field size (4) + transform header
size (52) + SMB2 header size (64) + create response size (56).
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Add checking for the path component length and verify it is <= the maximum
that the server advertizes via FileFsAttributeInformation.
With this patch cifs.ko will now return ENAMETOOLONG instead of ENOENT
when users to access an overlong path.
To test this, try to cd into a (non-existing) directory on a CIFS share
that has a too long name:
cd /mnt/aaaaaaaaaaaaaaa...
and it now should show a good error message from the shell:
bash: cd: /mnt/aaaaaaaaaaaaaaaa...aaaaaa: File name too long
rh bz 1153996
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Cc: <stable@vger.kernel.org>
The df for a SMB2 share triggers a GetInfo call for
FS_FULL_SIZE_INFORMATION. The values returned are used to populate
struct statfs.
The problem is that none of the information returned by the call
contains the total blocks available on the filesystem. Instead we use
the blocks available to the user ie. quota limitation when filling out
statfs.f_blocks. The information returned does contain Actual free units
on the filesystem and is used to populate statfs.f_bfree. For users with
quota enabled, it can lead to situations where the total free space
reported is more than the total blocks on the system ending up with df
reports like the following
# df -h /mnt/a
Filesystem Size Used Avail Use% Mounted on
//192.168.22.10/a 2.5G -2.3G 2.5G - /mnt/a
To fix this problem, we instead populate both statfs.f_bfree with the
same value as statfs.f_bavail ie. CallerAvailableAllocationUnits. This
is similar to what is done already in the code for cifs and df now
reports the quota information for the user used to mount the share.
# df --si /mnt/a
Filesystem Size Used Avail Use% Mounted on
//192.168.22.10/a 2.7G 101M 2.6G 4% /mnt/a
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Pierguido Lambri <plambri@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Cc: <stable@vger.kernel.org>
This patch converts most of the in-kernel filesystems that do writeback
out of the pagecache to report errors using the errseq_t-based
infrastructure that was recently added. This allows them to report
errors once for each open file description.
Most filesystems have a fairly straightforward fsync operation. They
call filemap_write_and_wait_range to write back all of the data and
wait on it, and then (sometimes) sync out the metadata.
For those filesystems this is a straightforward conversion from calling
filemap_write_and_wait_range in their fsync operation to calling
file_write_and_wait_range.
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Since commit c69899a17c "NFSv4: Update of VFS byte range lock must be
atomic with the stateid update", NFSv4 has been inserting locks in rpciod
worker context. The result is that the file_lock's fl_nspid is the
kworker's pid instead of the original userspace pid.
The fl_nspid is only used to represent the namespaced virtual pid number
when displaying locks or returning from F_GETLK. There's no reason to set
it for every inserted lock, since we can usually just look it up from
fl_pid. So, instead of looking up and holding struct pid for every lock,
let's just look up the virtual pid number from fl_pid when it is needed.
That means we can remove fl_nspid entirely.
The translaton and presentation of fl_pid should handle the following four
cases:
1 - F_GETLK on a remote file with a remote lock:
In this case, the filesystem should determine the l_pid to return here.
Filesystems should indicate that the fl_pid represents a non-local pid
value that should not be translated by returning an fl_pid <= 0.
2 - F_GETLK on a local file with a remote lock:
This should be the l_pid of the lock manager process, and translated.
3 - F_GETLK on a remote file with a local lock, and
4 - F_GETLK on a local file with a local lock:
These should be the translated l_pid of the local locking process.
Fuse was already doing the correct thing by translating the pid into the
caller's namespace. With this change we must update fuse to translate
to init's pid namespace, so that the locks API can then translate from
init's pid namespace into the pid namespace of the caller.
With this change, the locks API will expect that if a filesystem returns
a remote pid as opposed to a local pid for F_GETLK, that remote pid will
be <= 0. This signifies that the pid is remote, and the locks API will
forego translating that pid into the pid namespace of the local calling
process.
Finally, we convert remote filesystems to present remote pids using
negative numbers. Have lustre, 9p, ceph, cifs, and dlm negate the remote
pid returned for F_GETLK lock requests.
Since local pids will never be larger than PID_MAX_LIMIT (which is
currently defined as <= 4 million), but pid_t is an unsigned int, we
should have plenty of room to represent remote pids with negative
numbers if we assume that remote pid numbers are similarly limited.
If this is not the case, then we run the risk of having a remote pid
returned for which there is also a corresponding local pid. This is a
problem we have now, but this patch should reduce the chances of that
occurring, while also returning those remote pid numbers, for whatever
that may be worth.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
callers can more safely get random bytes if they can block until the
CRNG is initialized.
Also print a warning if get_random_*() is called before the CRNG is
initialized. By default, only one single-line warning will be printed
per boot. If CONFIG_WARN_ALL_UNSEEDED_RANDOM is defined, then a
warning will be printed for each function which tries to get random
bytes before the CRNG is initialized. This can get spammy for certain
architecture types, so it is not enabled by default.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAllqXNUACgkQ8vlZVpUN
gaPtAgf/aUbXZuWYsDQzslHsbzEWi+qz4QgL885/w4L00pEImTTp91Q06SDxWhtB
KPvGnZHS3IofxBh2DC+6AwN6dPMoWDCfYhhO6po3FSz0DiPRIQCTuvOb8fhKY1X7
rTdDq2xtDxPGxJ25bMJtlrgzH2XlXPpVyPUeoc9uh87zUK5aesXpUn9kBniRexoz
ume+M/cDzPKkwNQpbLq8vzhNjoWMVv0FeW2akVvrjkkWko8nZLZ0R/kIyKQlRPdG
LZDXcz0oTHpDS6+ufEo292ZuWm2IGer2YtwHsKyCAsyEWsUqBz2yurtkSj3mAVyC
hHafyS+5WNaGdgBmg0zJxxwn5qxxLg==
=ua7p
-----END PGP SIGNATURE-----
Merge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull random updates from Ted Ts'o:
"Add wait_for_random_bytes() and get_random_*_wait() functions so that
callers can more safely get random bytes if they can block until the
CRNG is initialized.
Also print a warning if get_random_*() is called before the CRNG is
initialized. By default, only one single-line warning will be printed
per boot. If CONFIG_WARN_ALL_UNSEEDED_RANDOM is defined, then a
warning will be printed for each function which tries to get random
bytes before the CRNG is initialized. This can get spammy for certain
architecture types, so it is not enabled by default"
* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: reorder READ_ONCE() in get_random_uXX
random: suppress spammy warnings about unseeded randomness
random: warn when kernel uses unseeded randomness
net/route: use get_random_int for random counter
net/neighbor: use get_random_u32 for 32-bit hash random
rhashtable: use get_random_u32 for hash_rnd
ceph: ensure RNG is seeded before using
iscsi: ensure RNG is seeded before use
cifs: use get_random_u32 for 32-bit lock random
random: add get_random_{bytes,u32,u64,int,long,once}_wait family
random: add wait_for_random_bytes() API
There are multiple unused variables struct TCP_Server_Info *server
defined in many methods in smb2pdu.c. They should be removed and related
logic simplified.
Signed-off-by: Christos Gkekas <chris.gekas@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Due to recent publicity about security vulnerabilities in the
much older CIFS dialect, move the default dialect to the
widely accepted (and quite secure) SMB3.0 dialect from the
old default of the CIFS dialect.
We do not want to be encouraging use of less secure dialects,
and both Microsoft and CERT now strongly recommend not using the
older CIFS dialect (SMB Security Best Practices
"recommends disabling SMBv1").
SMB3 is both secure and widely available: in Windows 8 and later,
Samba and Macs.
Users can still choose to explicitly mount with the less secure
dialect (for old servers) by choosing "vers=1.0" on the cifs
mount
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Remove the CONFIG_CIFS_SMB2 ifdef and Kconfig option since they
must always be on now.
For various security reasons, SMB3 and later are STRONGLY preferred
over CIFS and older dialects, and SMB3 (and later) will now be
the default dialects so we do not want to allow them to be
ifdeffed out.
In the longer term, we may be able to make older CIFS support
disableable in Kconfig with a new set of #ifdef, but we always
want SMB3 and later support enabled.
Signed-off-by: Steven French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
According to the MS-SMB2 spec (3.2.5.1.6) once the client receives
STATUS_NETWORK_SESSION_EXPIRED error code from a server it should
reconnect the current SMB session. Currently the client doesn't do
that. This can result in subsequent client requests failing by
the server. The patch adds an additional logic to the demultiplex
thread to identify expired sessions and reconnect them.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Added set acl function. Very similar to set cifs acl function for smb1.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Modified current set info function to accommodate multiple info types and
additional information.
Added cifs acl specific function to invoke set info functionality.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQGcBAABAgAGBQJZYBCAAAoJEIosvXAHck9R2tMMAKSzD0O4cQn+TVEDpw9ZkwSc
g7xKjG57q/wc0ZuOk75FR9CPiWBgyno/3W7hsTfm/PhyqPHw2dOaCkgcUbahNamH
RlxY3TzU8yAUucxDdFcxL47whdj1NJwDynyjtHshEL3eKx2bd5STG8cw4UQrSLOU
CrG0XlqthPrgNEJavYP6bvrdfiuYeAnYykDdHwJiFLGVGgBhzqRVgjrTJkFClIlf
qQEal4+H2Hz5rM89I0xQLZINh4UflPtX8lIngohyHnpT5sFxal4k2BnibjFzG8Vg
r/zc5ePjEBvkIlpF5pAS2P6LO9295qOAltK5Wiq+7DYVS/KUDguQDMaXCTWb/zI6
rAi7TFCNlDOOmySj0vsU2AqubI9ZZ2iCeA4eaPRrSVda3ZAG2hNYm+M1P91trS6d
fqNJTsaPMYF4Je3lC7fe4PQIzBcq+H9gQk4gC0mAgyJ1rQmjSlm+yBop4ZdzepIA
g+q7HgOA8QL/+a7D/1AfPTp9dcT5z0V5vz60+KKWXQ==
=XSvA
-----END PGP SIGNATURE-----
Merge tag 'cifs-bug-fixes-for-4.13' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"First set of CIFS/SMB3 fixes for the merge window. Also improves POSIX
character mapping for SMB3"
* tag 'cifs-bug-fixes-for-4.13' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: fix circular locking dependency
cifs: set oparms.create_options rather than or'ing in CREATE_OPEN_BACKUP_INTENT
cifs: Do not modify mid entry after submitting I/O in cifs_call_async
CIFS: add SFM mapping for 0x01-0x1F
cifs: hide unused functions
cifs: Use smb 2 - 3 and cifsacl mount options getacl functions
cifs: prototype declaration and definition for smb 2 - 3 and cifsacl mount options
CIFS: add CONFIG_CIFS_DEBUG_KEYS to dump encryption keys
cifs: set mapping error when page writeback fails in writepage or launder_pages
SMB3: Enable encryption for SMB3.1.1
When a CIFS filesystem is mounted with the forcemand option and the
following command is run on it, lockdep warns about a circular locking
dependency between CifsInodeInfo::lock_sem and the inode lock.
while echo foo > hello; do :; done & while touch -c hello; do :; done
cifs_writev() takes the locks in the wrong order, but note that we can't
only flip the order around because it releases the inode lock before the
call to generic_write_sync() while it holds the lock_sem across that
call.
But, AFAICS, there is no need to hold the CifsInodeInfo::lock_sem across
the generic_write_sync() call either, so we can release both the locks
before generic_write_sync(), and change the order.
======================================================
WARNING: possible circular locking dependency detected
4.12.0-rc7+ #9 Not tainted
------------------------------------------------------
touch/487 is trying to acquire lock:
(&cifsi->lock_sem){++++..}, at: cifsFileInfo_put+0x88f/0x16a0
but task is already holding lock:
(&sb->s_type->i_mutex_key#11){+.+.+.}, at: utimes_common+0x3ad/0x870
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&sb->s_type->i_mutex_key#11){+.+.+.}:
__lock_acquire+0x1f74/0x38f0
lock_acquire+0x1cc/0x600
down_write+0x74/0x110
cifs_strict_writev+0x3cb/0x8c0
__vfs_write+0x4c1/0x930
vfs_write+0x14c/0x2d0
SyS_write+0xf7/0x240
entry_SYSCALL_64_fastpath+0x1f/0xbe
-> #0 (&cifsi->lock_sem){++++..}:
check_prevs_add+0xfa0/0x1d10
__lock_acquire+0x1f74/0x38f0
lock_acquire+0x1cc/0x600
down_write+0x74/0x110
cifsFileInfo_put+0x88f/0x16a0
cifs_setattr+0x992/0x1680
notify_change+0x61a/0xa80
utimes_common+0x3d4/0x870
do_utimes+0x1c1/0x220
SyS_utimensat+0x84/0x1a0
entry_SYSCALL_64_fastpath+0x1f/0xbe
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sb->s_type->i_mutex_key#11);
lock(&cifsi->lock_sem);
lock(&sb->s_type->i_mutex_key#11);
lock(&cifsi->lock_sem);
*** DEADLOCK ***
2 locks held by touch/487:
#0: (sb_writers#10){.+.+.+}, at: mnt_want_write+0x41/0xb0
#1: (&sb->s_type->i_mutex_key#11){+.+.+.}, at: utimes_common+0x3ad/0x870
stack backtrace:
CPU: 0 PID: 487 Comm: touch Not tainted 4.12.0-rc7+ #9
Call Trace:
dump_stack+0xdb/0x185
print_circular_bug+0x45b/0x790
__lock_acquire+0x1f74/0x38f0
lock_acquire+0x1cc/0x600
down_write+0x74/0x110
cifsFileInfo_put+0x88f/0x16a0
cifs_setattr+0x992/0x1680
notify_change+0x61a/0xa80
utimes_common+0x3d4/0x870
do_utimes+0x1c1/0x220
SyS_utimensat+0x84/0x1a0
entry_SYSCALL_64_fastpath+0x1f/0xbe
Fixes: 19dfc1f5f2 ("cifs: fix the race in cifs_writev()")
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Currently oparms.create_options is uninitialized and the code is logically
or'ing in CREATE_OPEN_BACKUP_INTENT onto a garbage value of
oparms.create_options from the stack. Fix this by just setting the value
rather than or'ing in the setting.
Detected by CoverityScan, CID#1447220 ("Unitialized scale value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
In cifs_call_async, server may respond as soon as I/O is submitted. Because
mid entry is freed on the return path, it should not be modified after I/O
is submitted.
cifs_save_when_sent modifies the sent timestamp in mid entry, and should not
be called after I/O. Call it before I/O.
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Hi,
attached patch adds more missing mappings for the 0x01-0x1f range. Please
review, if you're fine with it, considere it also for stable.
Björn
>From a97720c26db2ee77d4e798e3d383fcb6a348bd29 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Bj=C3=B6rn=20Jacke?= <bjacke@samba.org>
Date: Wed, 31 May 2017 22:48:41 +0200
Subject: [PATCH] cifs: add SFM mapping for 0x01-0x1F
0x1-0x1F has to be mapped to 0xF001-0xF01F
Signed-off-by: Bjoern Jacke <bjacke@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Some functions are only referenced under an #ifdef, causing a harmless
warning:
fs/cifs/smb2ops.c:1374:1: error: 'get_smb2_acl' defined but not used [-Werror=unused-function]
We could mark them __maybe_unused or add another #ifdef, I picked
the second approach here.
Fixes: b3fdda4d1e1b ("cifs: Use smb 2 - 3 and cifsacl mount options getacl functions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steve French <smfrench@gmail.com>
Fill in smb2/3 query acl functions in ops structures and use them.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Add definition and declaration of function to get cifs acls when
mounting with smb version 2 onwards to 3.
Extend/Alter query info function to allocate and return
security descriptors within the response.
Not yet handling the error case when the size of security descriptors
in response to query exceeds SMB2_MAX_BUFFER_SIZE.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Add new config option that dumps AES keys to the console when they are
generated. This is obviously for debugging purposes only, and should not
be enabled otherwise.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Steve French <smfrench@gmail.com>
We were missing a capability flag for SMB3.1.1
Signed-off-by: Steve French <steve.french@primarydata.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
'rc' is known to be 0 at this point. So if 'init_sg' or 'kzalloc' fails, we
should return -ENOMEM instead.
Also remove a useless 'rc' in a debug message as it is meaningless here.
Fixes: 026e93dc0a ("CIFS: Encrypt SMB3 requests before sending")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
There is a redundant return in function cifs_creation_time_get
that appears to be old vestigial code than can be removed. So
remove it.
Detected by CoverityScan, CID#1361924 ("Structurally dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Steve French