s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to show tests
x86:
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Rewrite gfn-pfn cache refresh
* Refuse starting the module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit
Neither of these settings should be changed by the guest and it is
a burden to support it in the acceleration code, so just inhibit
this code instead.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220606180829.102503-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These days there are too many AVIC/APICv inhibit
reasons, and it doesn't hurt to have some documentation
for them.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220606180829.102503-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove vendor checks from prefer_mwait_c1_over_halt function. Restore
the decision tree to support MWAIT C1 as the default idle state based on
CPUID checks as done by Thomas Gleixner in
commit 09fd4b4ef5 ("x86: use cpuid to check MWAIT support for C1")
The decision tree is removed in
commit 69fb3676df ("x86 idle: remove mwait_idle() and "idle=mwait" cmdline param")
Prefer MWAIT when the following conditions are satisfied:
1. CPUID_Fn00000001_ECX [Monitor] should be set
2. CPUID_Fn00000005 should be supported
3. If CPUID_Fn00000005_ECX [EMX] is set then there should be
at least one C1 substate available, indicated by
CPUID_Fn00000005_EDX [MWaitC1SubStates] bits.
Otherwise use HLT for default_idle function.
HPC customers who want to optimize for lower latency are known to
disable Global C-States in the BIOS. In fact, some vendors allow
choosing a BIOS 'performance' profile which explicitly disables
C-States. In this scenario, the cpuidle driver will not be loaded and
the kernel will continue with the default idle state chosen at boot
time. On AMD systems currently the default idle state is HLT which has
a higher exit latency compared to MWAIT.
The reason for the choice of HLT over MWAIT on AMD systems is:
1. Families prior to 10h didn't support MWAIT
2. Families 10h-15h supported MWAIT, but not MWAIT C1. Hence it was
preferable to use HLT as the default state on these systems.
However, AMD Family 17h onwards supports MWAIT as well as MWAIT C1. And
it is preferable to use MWAIT as the default idle state on these
systems, as it has lower exit latencies.
The below table represents the exit latency for HLT and MWAIT on AMD
Zen 3 system. Exit latency is measured by issuing a wakeup (IPI) to
other CPU and measuring how many clock cycles it took to wakeup. Each
iteration measures 10K wakeups by pinning source and destination.
HLT:
25.0000th percentile : 1900 ns
50.0000th percentile : 2000 ns
75.0000th percentile : 2300 ns
90.0000th percentile : 2500 ns
95.0000th percentile : 2600 ns
99.0000th percentile : 2800 ns
99.5000th percentile : 3000 ns
99.9000th percentile : 3400 ns
99.9500th percentile : 3600 ns
99.9900th percentile : 5900 ns
Min latency : 1700 ns
Max latency : 5900 ns
Total Samples 9999
MWAIT:
25.0000th percentile : 1400 ns
50.0000th percentile : 1500 ns
75.0000th percentile : 1700 ns
90.0000th percentile : 1800 ns
95.0000th percentile : 1900 ns
99.0000th percentile : 2300 ns
99.5000th percentile : 2500 ns
99.9000th percentile : 3200 ns
99.9500th percentile : 3500 ns
99.9900th percentile : 4600 ns
Min latency : 1200 ns
Max latency : 4600 ns
Total Samples 9997
Improvement (99th percentile): 21.74%
Below is another result for context_switch2 micro-benchmark, which
brings out the impact of improved wakeup latency through increased
context-switches per second.
with HLT:
-------------------------------
50.0000th percentile : 190184
75.0000th percentile : 191032
90.0000th percentile : 192314
95.0000th percentile : 192520
99.0000th percentile : 192844
MIN : 190148
MAX : 192852
with MWAIT:
-------------------------------
50.0000th percentile : 277444
75.0000th percentile : 278268
90.0000th percentile : 278888
95.0000th percentile : 279164
99.0000th percentile : 280504
MIN : 273278
MAX : 281410
Improvement(99th percentile): ~ 45.46%
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://ozlabs.org/~anton/junkcode/context_switch2.c
Link: https://lkml.kernel.org/r/0cc675d8fd1f55e41b510e10abf2e21b6e9803d5.1654538381.git-series.wyes.karny@amd.com
Currently the state of the speaker port (0x61) data bit (bit 1) is not
saved in the exported state (kvm_pit_state2) and hence is lost when
re-constructing guest state.
This patch removes the 'speaker_data_port' field from kvm_kpit_state and
instead tracks the state using a new KVM_PIT_FLAGS_SPEAKER_DATA_ON flag
defined in the API.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Message-Id: <20220531124421.1427-1-pdurrant@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fix TDP MMU performance issue with disabling dirty logging
* Fix 5.14 regression with SVM TSC scaling
* Fix indefinite stall on applying live patches
* Fix unstable selftest
* Fix memory leak from wrong copy-and-paste
* Fix missed PV TLB flush when racing with emulation
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKglysUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOJDAgArpPcAnJbeT2VQTQcp94e4tp9k1Sf
gmUewajco4zFVB/sldE0fIporETkaX+FYYPiaNDdNgJ2lUw/HUJBN7KoFEYTZ37N
Xx/qXiIXQYFw1bmxTnacLzIQtD3luMCzOs/6/Q7CAFZIBpUtUEjkMlQOBuxoKeG0
B0iLCTJSw0taWcN170aN8G6T+5+bdR3AJW1k2wkgfESfYF9NfJoTUHQj9WTMzM2R
aBRuXvUI/rWKvQY3DfoRmgg9Ig/SirSC+abbKIs4H08vZIEUlPk3WOZSKpsN/Wzh
3XDnVRxgnaRLx6NI/ouI2UYJCmjPKbNcueGCf5IfUcHvngHjAEG/xxe4Qw==
=zQ9u
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
- syzkaller NULL pointer dereference
- TDP MMU performance issue with disabling dirty logging
- 5.14 regression with SVM TSC scaling
- indefinite stall on applying live patches
- unstable selftest
- memory leak from wrong copy-and-paste
- missed PV TLB flush when racing with emulation
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: do not report a vCPU as preempted outside instruction boundaries
KVM: x86: do not set st->preempted when going back to user space
KVM: SVM: fix tsc scaling cache logic
KVM: selftests: Make hyperv_clock selftest more stable
KVM: x86/MMU: Zap non-leaf SPTEs when disabling dirty logging
x86: drop bogus "cc" clobber from __try_cmpxchg_user_asm()
KVM: x86/mmu: Check every prev_roots in __kvm_mmu_free_obsolete_roots()
entry/kvm: Exit to user mode when TIF_NOTIFY_SIGNAL is set
KVM: Don't null dereference ops->destroy
There are cases that malicious virtual machines can cause CPU stuck (due
to event windows don't open up), e.g., infinite loop in microcode when
nested #AC (CVE-2015-5307). No event window means no event (NMI, SMI and
IRQ) can be delivered. It leads the CPU to be unavailable to host or
other VMs.
VMM can enable notify VM exit that a VM exit generated if no event
window occurs in VM non-root mode for a specified amount of time (notify
window).
Feature enabling:
- The new vmcs field SECONDARY_EXEC_NOTIFY_VM_EXITING is introduced to
enable this feature. VMM can set NOTIFY_WINDOW vmcs field to adjust
the expected notify window.
- Add a new KVM capability KVM_CAP_X86_NOTIFY_VMEXIT so that user space
can query and enable this feature in per-VM scope. The argument is a
64bit value: bits 63:32 are used for notify window, and bits 31:0 are
for flags. Current supported flags:
- KVM_X86_NOTIFY_VMEXIT_ENABLED: enable the feature with the notify
window provided.
- KVM_X86_NOTIFY_VMEXIT_USER: exit to userspace once the exits happen.
- It's safe to even set notify window to zero since an internal hardware
threshold is added to vmcs.notify_window.
VM exit handling:
- Introduce a vcpu state notify_window_exits to records the count of
notify VM exits and expose it through the debugfs.
- Notify VM exit can happen incident to delivery of a vector event.
Allow it in KVM.
- Exit to userspace unconditionally for handling when VM_CONTEXT_INVALID
bit is set.
Nested handling
- Nested notify VM exits are not supported yet. Keep the same notify
window control in vmcs02 as vmcs01, so that L1 can't escape the
restriction of notify VM exits through launching L2 VM.
Notify VM exit is defined in latest Intel Architecture Instruction Set
Extensions Programming Reference, chapter 9.2.
Co-developed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Co-developed-by: Chenyi Qiang <chenyi.qiang@intel.com>
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20220524135624.22988-5-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add kvm_caps to hold a variety of capabilites and defaults that aren't
handled by kvm_cpu_caps because they aren't CPUID bits in order to reduce
the amount of boilerplate code required to add a new feature. The vast
majority (all?) of the caps interact with vendor code and are written
only during initialization, i.e. should be tagged __read_mostly, declared
extern in x86.h, and exported.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220524135624.22988-4-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For the triple fault sythesized by KVM, e.g. the RSM path or
nested_vmx_abort(), if KVM exits to userspace before the request is
serviced, userspace could migrate the VM and lose the triple fault.
Extend KVM_{G,S}ET_VCPU_EVENTS to support pending triple fault with a
new event KVM_VCPUEVENT_VALID_FAULT_FAULT so that userspace can save and
restore the triple fault event. This extension is guarded by a new KVM
capability KVM_CAP_TRIPLE_FAULT_EVENT.
Note that in the set_vcpu_events path, userspace is able to set/clear
the triple fault request through triple_fault.pending field.
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20220524135624.22988-2-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All gp or fixed counters have been reprogrammed using PERF_TYPE_RAW,
which means that the table that maps perf_hw_id to event select values is
no longer useful, at least for AMD.
For Intel, the logic to check if the pmu event reported by Intel cpuid is
not available is still required, in which case pmc_perf_hw_id() could be
renamed to hw_event_is_unavail() and a bool value is returned to replace
the semantics of "PERF_COUNT_HW_MAX+1".
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220518132512.37864-12-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, we have [intel|knc|p4|p6]_perfmon_event_map on the Intel
platforms and amd_[f17h]_perfmon_event_map on the AMD platforms.
Early clumsy KVM code or other potential perf_event users may have
hard-coded these perfmon_maps (e.g., arch/x86/kvm/svm/pmu.c), so
it would not make sense to program a common hardware event based
on the generic "enum perf_hw_id" once the two tables do not match.
Let's provide an interface for callers outside the perf subsystem to get
the counter config based on the perfmon_event_map currently in use,
and it also helps to save bytes.
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Like Xu <likexu@tencent.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-Id: <20220518132512.37864-10-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The guest PEBS will be disabled when some users try to perf KVM and
its user-space through the same PEBS facility OR when the host perf
doesn't schedule the guest PEBS counter in a one-to-one mapping manner
(neither of these are typical scenarios).
The PEBS records in the guest DS buffer are still accurate and the
above two restrictions will be checked before each vm-entry only if
guest PEBS is deemed to be enabled.
Suggested-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-Id: <20220411101946.20262-15-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If IA32_PERF_CAPABILITIES.PEBS_BASELINE [bit 14] is set, the adaptive
PEBS is supported. The PEBS_DATA_CFG MSR and adaptive record enable
bits (IA32_PERFEVTSELx.Adaptive_Record and IA32_FIXED_CTR_CTRL.
FCx_Adaptive_Record) are also supported.
Adaptive PEBS provides software the capability to configure the PEBS
records to capture only the data of interest, keeping the record size
compact. An overflow of PMCx results in generation of an adaptive PEBS
record with state information based on the selections specified in
MSR_PEBS_DATA_CFG.By default, the record only contain the Basic group.
When guest adaptive PEBS is enabled, the IA32_PEBS_ENABLE MSR will
be added to the perf_guest_switch_msr() and switched during the VMX
transitions just like CORE_PERF_GLOBAL_CTRL MSR.
According to Intel SDM, software is recommended to PEBS Baseline
when the following is true. IA32_PERF_CAPABILITIES.PEBS_BASELINE[14]
&& IA32_PERF_CAPABILITIES.PEBS_FMT[11:8] ≥ 4.
Co-developed-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220411101946.20262-12-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When CPUID.01H:EDX.DS[21] is set, the IA32_DS_AREA MSR exists and points
to the linear address of the first byte of the DS buffer management area,
which is used to manage the PEBS records.
When guest PEBS is enabled, the MSR_IA32_DS_AREA MSR will be added to the
perf_guest_switch_msr() and switched during the VMX transitions just like
CORE_PERF_GLOBAL_CTRL MSR. The WRMSR to IA32_DS_AREA MSR brings a #GP(0)
if the source register contains a non-canonical address.
Originally-by: Andi Kleen <ak@linux.intel.com>
Co-developed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-Id: <20220411101946.20262-11-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If IA32_PERF_CAPABILITIES.PEBS_BASELINE [bit 14] is set, the
IA32_PEBS_ENABLE MSR exists and all architecturally enumerated fixed
and general-purpose counters have corresponding bits in IA32_PEBS_ENABLE
that enable generation of PEBS records. The general-purpose counter bits
start at bit IA32_PEBS_ENABLE[0], and the fixed counter bits start at
bit IA32_PEBS_ENABLE[32].
When guest PEBS is enabled, the IA32_PEBS_ENABLE MSR will be
added to the perf_guest_switch_msr() and atomically switched during
the VMX transitions just like CORE_PERF_GLOBAL_CTRL MSR.
Based on whether the platform supports x86_pmu.pebs_ept, it has also
refactored the way to add more msrs to arr[] in intel_guest_get_msrs()
for extensibility.
Originally-by: Andi Kleen <ak@linux.intel.com>
Co-developed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Co-developed-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-Id: <20220411101946.20262-8-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The mask value of fixed counter control register should be dynamic
adjusted with the number of fixed counters. This patch introduces a
variable that includes the reserved bits of fixed counter control
registers. This is a generic code refactoring.
Co-developed-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-Id: <20220411101946.20262-6-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Splitting the logic for determining the guest values is unnecessarily
confusing, and potentially fragile. Perf should have full knowledge and
control of what values are loaded for the guest.
If we change .guest_get_msrs() to take a struct kvm_pmu pointer, then it
can generate the full set of guest values by grabbing guest ds_area and
pebs_data_cfg. Alternatively, .guest_get_msrs() could take the desired
guest MSR values directly (ds_area and pebs_data_cfg), but kvm_pmu is
vendor agnostic, so we don't see any reason to not just pass the pointer.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-Id: <20220411101946.20262-4-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for EPT-Friendly PEBS, a new CPU feature that enlightens PEBS
to translate guest linear address through EPT, and facilitates handling
VM-Exits that occur when accessing PEBS records. More information can
be found in the December 2021 release of Intel's SDM, Volume 3,
18.9.5 "EPT-Friendly PEBS". This new hardware facility makes sure the
guest PEBS records will not be lost, which is available on Intel Ice Lake
Server platforms (and later).
KVM will check this field through perf_get_x86_pmu_capability() instead
of hard coding the CPU models in the KVM code. If it is supported, the
guest PEBS capability will be exposed to the guest. Guest PEBS can be
enabled when and only when "EPT-Friendly PEBS" is supported and
EPT is enabled.
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220411101946.20262-2-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With IPI virtualization enabled, the processor emulates writes to
APIC registers that would send IPIs. The processor sets the bit
corresponding to the vector in target vCPU's PIR and may send a
notification (IPI) specified by NDST and NV fields in target vCPU's
Posted-Interrupt Descriptor (PID). It is similar to what IOMMU
engine does when dealing with posted interrupt from devices.
A PID-pointer table is used by the processor to locate the PID of a
vCPU with the vCPU's APIC ID. The table size depends on maximum APIC
ID assigned for current VM session from userspace. Allocating memory
for PID-pointer table is deferred to vCPU creation, because irqchip
mode and VM-scope maximum APIC ID is settled at that point. KVM can
skip PID-pointer table allocation if !irqchip_in_kernel().
Like VT-d PI, if a vCPU goes to blocked state, VMM needs to switch its
notification vector to wakeup vector. This can ensure that when an IPI
for blocked vCPUs arrives, VMM can get control and wake up blocked
vCPUs. And if a VCPU is preempted, its posted interrupt notification
is suppressed.
Note that IPI virtualization can only virualize physical-addressing,
flat mode, unicast IPIs. Sending other IPIs would still cause a
trap-like APIC-write VM-exit and need to be handled by VMM.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Message-Id: <20220419154510.11938-1-guang.zeng@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce new max_vcpu_ids in KVM for x86 architecture. Userspace
can assign maximum possible vcpu id for current VM session using
KVM_CAP_MAX_VCPU_ID of KVM_ENABLE_CAP ioctl().
This is done for x86 only because the sole use case is to guide
memory allocation for PID-pointer table, a structure needed to
enable VMX IPI.
By default, max_vcpu_ids set as KVM_MAX_VCPU_IDS.
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Message-Id: <20220419154444.11888-1-guang.zeng@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check VMX features on tertiary execution control in VMCS config setup.
Sub-features in tertiary execution control to be enabled are adjusted
according to hardware capabilities although no sub-feature is enabled
in this patch.
EVMCSv1 doesn't support tertiary VM-execution control, so disable it
when EVMCSv1 is in use. And define the auxiliary functions for Tertiary
control field here, using the new BUILD_CONTROLS_SHADOW().
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Message-Id: <20220419153400.11642-1-guang.zeng@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A new 64-bit control field "tertiary processor-based VM-execution
controls", is defined [1]. It's controlled by bit 17 of the primary
processor-based VM-execution controls.
Different from its brother VM-execution fields, this tertiary VM-
execution controls field is 64 bit. So it occupies 2 vmx_feature_leafs,
TERTIARY_CTLS_LOW and TERTIARY_CTLS_HIGH.
Its companion VMX capability reporting MSR,MSR_IA32_VMX_PROCBASED_CTLS3
(0x492), is also semantically different from its brothers, whose 64 bits
consist of all allow-1, rather than 32-bit allow-0 and 32-bit allow-1 [1][2].
Therefore, its init_vmx_capabilities() is a little different from others.
[1] ISE 6.2 "VMCS Changes"
https://www.intel.com/content/www/us/en/develop/download/intel-architecture-instruction-set-extensions-programming-reference.html
[2] SDM Vol3. Appendix A.3
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Message-Id: <20220419153240.11549-1-guang.zeng@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the IRQ injection tracepoint, differentiate between Hard IRQs and Soft
"IRQs", i.e. interrupts that are reinjected after incomplete delivery of
a software interrupt from an INTn instruction. Tag reinjected interrupts
as such, even though the information is usually redundant since soft
interrupts are only ever reinjected by KVM. Though rare in practice, a
hard IRQ can be reinjected.
Signed-off-by: Sean Christopherson <seanjc@google.com>
[MSS: change "kvm_inj_virq" event "reinjected" field type to bool]
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <9664d49b3bd21e227caa501cff77b0569bebffe2.1651440202.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If a vCPU is outside guest mode and is scheduled out, it might be in the
process of making a memory access. A problem occurs if another vCPU uses
the PV TLB flush feature during the period when the vCPU is scheduled
out, and a virtual address has already been translated but has not yet
been accessed, because this is equivalent to using a stale TLB entry.
To avoid this, only report a vCPU as preempted if sure that the guest
is at an instruction boundary. A rescheduling request will be delivered
to the host physical CPU as an external interrupt, so for simplicity
consider any vmexit *not* instruction boundary except for external
interrupts.
It would in principle be okay to report the vCPU as preempted also
if it is sleeping in kvm_vcpu_block(): a TLB flush IPI will incur the
vmentry/vmexit overhead unnecessarily, and optimistic spinning is
also unlikely to succeed. However, leave it for later because right
now kvm_vcpu_check_block() is doing memory accesses. Even
though the TLB flush issue only applies to virtual memory address,
it's very much preferrable to be conservative.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As noted (and fixed) a couple of times in the past, "=@cc<cond>" outputs
and clobbering of "cc" don't work well together. The compiler appears to
mean to reject such, but doesn't - in its upstream form - quite manage
to yet for "cc". Furthermore two similar macros don't clobber "cc", and
clobbering "cc" is pointless in asm()-s for x86 anyway - the compiler
always assumes status flags to be clobbered there.
Fixes: 989b5db215 ("x86/uaccess: Implement macros for CMPXCHG on user addresses")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Message-Id: <485c0c0b-a3a7-0b7c-5264-7d00c01de032@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Handle __ubsan_handle_builtin_unreachable() correctly and treat it as
noreturn.
- Allow architectures to select uaccess validation
- Use the non-instrumented bit test for test_cpu_has() to prevent escape
from non-instrumentable regions.
- Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape
from non-instrumentable regions.
- Mark a few tiny inline as __always_inline to prevent GCC from bringing
them out of line and instrumenting them.
- Mark the empty stub context_tracking_enabled() as always inline as GCC
brings them out of line and instruments the empty shell.
- Annotate ex_handler_msr_mce() as dead end
-----BEGIN PGP SIGNATURE-----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=eNVp
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Thomas Gleixner:
- Handle __ubsan_handle_builtin_unreachable() correctly and treat it as
noreturn
- Allow architectures to select uaccess validation
- Use the non-instrumented bit test for test_cpu_has() to prevent
escape from non-instrumentable regions
- Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape
from non-instrumentable regions
- Mark a few tiny inline as __always_inline to prevent GCC from
bringing them out of line and instrumenting them
- Mark the empty stub context_tracking_enabled() as always inline as
GCC brings them out of line and instruments the empty shell
- Annotate ex_handler_msr_mce() as dead end
* tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/extable: Annotate ex_handler_msr_mce() as a dead end
context_tracking: Always inline empty stubs
x86: Always inline on_thread_stack() and current_top_of_stack()
jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds
x86/cpu: Elide KCSAN for cpu_has() and friends
objtool: Mark __ubsan_handle_builtin_unreachable() as noreturn
objtool: Add CONFIG_HAVE_UACCESS_VALIDATION
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYprzPAAKCRCAXGG7T9hj
vuTzAQC4GiDXcD/cfLVcEqdyw1diCWZjuOfuznUqy5ZUBAZjvAD/draFHTeO96+k
qyZyzFggPIziaAOIUZ2DkJ/NqSAmbA8=
=dl1E
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
"Two cleanup patches for Xen related code and (more important) an
update of MAINTAINERS for Xen, as Boris Ostrovsky decided to step
down"
* tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: replace xen_remap() with memremap()
MAINTAINERS: Update Xen maintainership
xen: switch gnttab_end_foreign_access() to take a struct page pointer
ordinary user mode tasks.
In commit 40966e316f ("kthread: Ensure struct kthread is present for
all kthreads") caused init and the user mode helper threads that call
kernel_execve to have struct kthread allocated for them. This struct
kthread going away during execve in turned made a use after free of
struct kthread possible.
The commit 343f4c49f2 ("kthread: Don't allocate kthread_struct for
init and umh") is enough to fix the use after free and is simple enough
to be backportable.
The rest of the changes pass struct kernel_clone_args to clean things
up and cause the code to make sense.
In making init and the user mode helpers tasks purely user mode tasks
I ran into two complications. The function task_tick_numa was
detecting tasks without an mm by testing for the presence of
PF_KTHREAD. The initramfs code in populate_initrd_image was using
flush_delayed_fput to ensuere the closing of all it's file descriptors
was complete, and flush_delayed_fput does not work in a userspace thread.
I have looked and looked and more complications and in my code review
I have not found any, and neither has anyone else with the code sitting
in linux-next.
Link: https://lkml.kernel.org/r/87mtfu4up3.fsf@email.froward.int.ebiederm.org
Eric W. Biederman (8):
kthread: Don't allocate kthread_struct for init and umh
fork: Pass struct kernel_clone_args into copy_thread
fork: Explicity test for idle tasks in copy_thread
fork: Generalize PF_IO_WORKER handling
init: Deal with the init process being a user mode process
fork: Explicitly set PF_KTHREAD
fork: Stop allowing kthreads to call execve
sched: Update task_tick_numa to ignore tasks without an mm
arch/alpha/kernel/process.c | 13 ++++++------
arch/arc/kernel/process.c | 13 ++++++------
arch/arm/kernel/process.c | 12 ++++++-----
arch/arm64/kernel/process.c | 12 ++++++-----
arch/csky/kernel/process.c | 15 ++++++-------
arch/h8300/kernel/process.c | 10 ++++-----
arch/hexagon/kernel/process.c | 12 ++++++-----
arch/ia64/kernel/process.c | 15 +++++++------
arch/m68k/kernel/process.c | 12 ++++++-----
arch/microblaze/kernel/process.c | 12 ++++++-----
arch/mips/kernel/process.c | 13 ++++++------
arch/nios2/kernel/process.c | 12 ++++++-----
arch/openrisc/kernel/process.c | 12 ++++++-----
arch/parisc/kernel/process.c | 18 +++++++++-------
arch/powerpc/kernel/process.c | 15 +++++++------
arch/riscv/kernel/process.c | 12 ++++++-----
arch/s390/kernel/process.c | 12 ++++++-----
arch/sh/kernel/process_32.c | 12 ++++++-----
arch/sparc/kernel/process_32.c | 12 ++++++-----
arch/sparc/kernel/process_64.c | 12 ++++++-----
arch/um/kernel/process.c | 15 +++++++------
arch/x86/include/asm/fpu/sched.h | 2 +-
arch/x86/include/asm/switch_to.h | 8 +++----
arch/x86/kernel/fpu/core.c | 4 ++--
arch/x86/kernel/process.c | 18 +++++++++-------
arch/xtensa/kernel/process.c | 17 ++++++++-------
fs/exec.c | 8 ++++---
include/linux/sched/task.h | 8 +++++--
init/initramfs.c | 2 ++
init/main.c | 2 +-
kernel/fork.c | 46 +++++++++++++++++++++++++++++++++-------
kernel/sched/fair.c | 2 +-
kernel/umh.c | 6 +++---
33 files changed, 234 insertions(+), 160 deletions(-)
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----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=x6fy
-----END PGP SIGNATURE-----
Merge tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull kthread updates from Eric Biederman:
"This updates init and user mode helper tasks to be ordinary user mode
tasks.
Commit 40966e316f ("kthread: Ensure struct kthread is present for
all kthreads") caused init and the user mode helper threads that call
kernel_execve to have struct kthread allocated for them. This struct
kthread going away during execve in turned made a use after free of
struct kthread possible.
Here, commit 343f4c49f2 ("kthread: Don't allocate kthread_struct for
init and umh") is enough to fix the use after free and is simple
enough to be backportable.
The rest of the changes pass struct kernel_clone_args to clean things
up and cause the code to make sense.
In making init and the user mode helpers tasks purely user mode tasks
I ran into two complications. The function task_tick_numa was
detecting tasks without an mm by testing for the presence of
PF_KTHREAD. The initramfs code in populate_initrd_image was using
flush_delayed_fput to ensuere the closing of all it's file descriptors
was complete, and flush_delayed_fput does not work in a userspace
thread.
I have looked and looked and more complications and in my code review
I have not found any, and neither has anyone else with the code
sitting in linux-next"
* tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sched: Update task_tick_numa to ignore tasks without an mm
fork: Stop allowing kthreads to call execve
fork: Explicitly set PF_KTHREAD
init: Deal with the init process being a user mode process
fork: Generalize PF_IO_WORKER handling
fork: Explicity test for idle tasks in copy_thread
fork: Pass struct kernel_clone_args into copy_thread
kthread: Don't allocate kthread_struct for init and umh
- fix new DXE service invocations for mixed mode
- use correct Kconfig symbol when setting PE header flag
- clean up the drivers/firmware/efi Kconfig dependencies so that
features that depend on CONFIG_EFI are hidden from the UI when the
symbol is not enabled.
Also included is a RISC-V bugfix from Heinrich to avoid read-write
mappings of read-only firmware regions in the EFI page tables.
-----BEGIN PGP SIGNATURE-----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=7wiT
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull more EFI updates from Ard Biesheuvel:
"Follow-up tweaks for EFI changes - they mostly address issues
introduced this merge window, except for Heinrich's patch:
- fix new DXE service invocations for mixed mode
- use correct Kconfig symbol when setting PE header flag
- clean up the drivers/firmware/efi Kconfig dependencies so that
features that depend on CONFIG_EFI are hidden from the UI when the
symbol is not enabled.
Also included is a RISC-V bugfix from Heinrich to avoid read-write
mappings of read-only firmware regions in the EFI page tables"
* tag 'efi-next-for-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: clean up Kconfig dependencies on CONFIG_EFI
efi/x86: libstub: Make DXE calls mixed mode safe
efi: x86: Fix config name for setting the NX-compatibility flag in the PE header
riscv: read-only pages should not be writable
The newly added DXE calls use 64-bit quantities, which means we need to
marshall them explicitly when running in mixed mode. Currently, we get
away without it because we just bail when GetMemorySpaceDescriptor()
fails, which is guaranteed to happen due to the function argument mixup.
Let's fix this properly, though, by defining the macros that describe
how to marshall the arguments. While at it, drop an incorrect cast on a
status variable.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
xen_remap() is used to establish mappings for frames not under direct
control of the kernel: for Xenstore and console ring pages, and for
grant pages of non-PV guests.
Today xen_remap() is defined to use ioremap() on x86 (doing uncached
mappings), and ioremap_cache() on Arm (doing cached mappings).
Uncached mappings for those use cases are bad for performance, so they
should be avoided if possible. As all use cases of xen_remap() don't
require uncached mappings (the mapped area is always physical RAM),
a mapping using the standard WB cache mode is fine.
As sparse is flagging some of the xen_remap() use cases to be not
appropriate for iomem(), as the result is not annotated with the
__iomem modifier, eliminate xen_remap() completely and replace all
use cases with memremap() specifying the MEMREMAP_WB caching mode.
xen_unmap() can be replaced with memunmap().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20220530082634.6339-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
* Support for the Svpbmt extension, which allows memory attributes to be
encoded in pages.
* Support for the Allwinner D1's implementation of page-based memory
attributes.
* Support for running rv32 binaries on rv64 systems, via the compat
subsystem.
* Support for kexec_file().
* Support for the new generic ticket-based spinlocks, which allows us to
also move to qrwlock. These should have already gone in through the
asm-geneic tree as well.
* A handful of cleanups and fixes, include some larger ones around
atomics and XIP.
-----BEGIN PGP SIGNATURE-----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=Loi6
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the Svpbmt extension, which allows memory attributes to
be encoded in pages
- Support for the Allwinner D1's implementation of page-based memory
attributes
- Support for running rv32 binaries on rv64 systems, via the compat
subsystem
- Support for kexec_file()
- Support for the new generic ticket-based spinlocks, which allows us
to also move to qrwlock. These should have already gone in through
the asm-geneic tree as well
- A handful of cleanups and fixes, include some larger ones around
atomics and XIP
* tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add]
riscv: compat: Using seperated vdso_maps for compat_vdso_info
RISC-V: Fix the XIP build
RISC-V: Split out the XIP fixups into their own file
RISC-V: ignore xipImage
RISC-V: Avoid empty create_*_mapping definitions
riscv: Don't output a bogus mmu-type on a no MMU kernel
riscv: atomic: Add custom conditional atomic operation implementation
riscv: atomic: Optimize dec_if_positive functions
riscv: atomic: Cleanup unnecessary definition
RISC-V: Load purgatory in kexec_file
RISC-V: Add purgatory
RISC-V: Support for kexec_file on panic
RISC-V: Add kexec_file support
RISC-V: use memcpy for kexec_file mode
kexec_file: Fix kexec_file.c build error for riscv platform
riscv: compat: Add COMPAT Kbuild skeletal support
riscv: compat: ptrace: Add compat_arch_ptrace implement
riscv: compat: signal: Add rt_frame implementation
riscv: add memory-type errata for T-Head
...
- The majority of the changes are for fixes and clean ups.
Noticeable changes:
- Rework trace event triggers code to be easier to interact with.
- Support for embedding bootconfig with the kernel (as suppose to having it
embedded in initram). This is useful for embedded boards without initram
disks.
- Speed up boot by parallelizing the creation of tracefs files.
- Allow absolute ring buffer timestamps handle timestamps that use more than
59 bits.
- Added new tracing clock "TAI" (International Atomic Time)
- Have weak functions show up in available_filter_function list as:
__ftrace_invalid_address___<invalid-offset>
instead of using the name of the function before it.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYpOgXRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qjkKAQDbpemxvpFyJlZqT8KgEIXubu+ag2/q
p0XDHaPS0zF9OQEAjTxg6GMEbnFYl6fzxZtOoEbiaQ7ppfdhRI8t6sSMVA8=
=+nDD
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The majority of the changes are for fixes and clean ups.
Notable changes:
- Rework trace event triggers code to be easier to interact with.
- Support for embedding bootconfig with the kernel (as suppose to
having it embedded in initram). This is useful for embedded boards
without initram disks.
- Speed up boot by parallelizing the creation of tracefs files.
- Allow absolute ring buffer timestamps handle timestamps that use
more than 59 bits.
- Added new tracing clock "TAI" (International Atomic Time)
- Have weak functions show up in available_filter_function list as:
__ftrace_invalid_address___<invalid-offset> instead of using the
name of the function before it"
* tag 'trace-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (52 commits)
ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function
tracing: Fix comments for event_trigger_separate_filter()
x86/traceponit: Fix comment about irq vector tracepoints
x86,tracing: Remove unused headers
ftrace: Clean up hash direct_functions on register failures
tracing: Fix comments of create_filter()
tracing: Disable kcov on trace_preemptirq.c
tracing: Initialize integer variable to prevent garbage return value
ftrace: Fix typo in comment
ftrace: Remove return value of ftrace_arch_modify_*()
tracing: Cleanup code by removing init "char *name"
tracing: Change "char *" string form to "char []"
tracing/timerlat: Do not wakeup the thread if the trace stops at the IRQ
tracing/timerlat: Print stacktrace in the IRQ handler if needed
tracing/timerlat: Notify IRQ new max latency only if stop tracing is set
kprobes: Fix build errors with CONFIG_KRETPROBES=n
tracing: Fix return value of trace_pid_write()
tracing: Fix potential double free in create_var_ref()
tracing: Use strim() to remove whitespace instead of doing it manually
ftrace: Deal with error return code of the ftrace_process_locs() function
...
If an unused weak function was traced, it's call to fentry will still
exist, which gets added into the __mcount_loc table. Ftrace will use
kallsyms to retrieve the name for each location in __mcount_loc to display
it in the available_filter_functions and used to enable functions via the
name matching in set_ftrace_filter/notrace. Enabling these functions do
nothing but enable an unused call to ftrace_caller. If a traced weak
function is overridden, the symbol of the function would be used for it,
which will either created duplicate names, or if the previous function was
not traced, it would be incorrectly be listed in available_filter_functions
as a function that can be traced.
This became an issue with BPF[1] as there are tooling that enables the
direct callers via ftrace but then checks to see if the functions were
actually enabled. The case of one function that was marked notrace, but
was followed by an unused weak function that was traced. The unused
function's call to fentry was added to the __mcount_loc section, and
kallsyms retrieved the untraced function's symbol as the weak function was
overridden. Since the untraced function would not get traced, the BPF
check would detect this and fail.
The real fix would be to fix kallsyms to not show addresses of weak
functions as the function before it. But that would require adding code in
the build to add function size to kallsyms so that it can know when the
function ends instead of just using the start of the next known symbol.
In the mean time, this is a work around. Add a FTRACE_MCOUNT_MAX_OFFSET
macro that if defined, ftrace will ignore any function that has its call
to fentry/mcount that has an offset from the symbol that is greater than
FTRACE_MCOUNT_MAX_OFFSET.
If CONFIG_HAVE_FENTRY is defined for x86, define FTRACE_MCOUNT_MAX_OFFSET
to zero (unless IBT is enabled), which will have ftrace ignore all locations
that are not at the start of the function (or one after the ENDBR
instruction).
A worker thread is added at boot up to scan all the ftrace record entries,
and will mark any that fail the FTRACE_MCOUNT_MAX_OFFSET test as disabled.
They will still appear in the available_filter_functions file as:
__ftrace_invalid_address___<invalid-offset>
(showing the offset that caused it to be invalid).
This is required for tools that use libtracefs (like trace-cmd does) that
scan the available_filter_functions and enable set_ftrace_filter and
set_ftrace_notrace using indexes of the function listed in the file (this
is a speedup, as enabling thousands of files via names is an O(n^2)
operation and can take minutes to complete, where the indexing takes less
than a second).
The invalid functions cannot be removed from available_filter_functions as
the names there correspond to the ftrace records in the array that manages
them (and the indexing depends on this).
[1] https://lore.kernel.org/all/20220412094923.0abe90955e5db486b7bca279@kernel.org/
Link: https://lkml.kernel.org/r/20220526141912.794c2786@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Add support for clearing memory error via pwrite(2) on DAX
- Fix 'security overwrite' support in the presence of media errors
- Miscellaneous cleanups and fixes for nfit_test (nvdimm unit tests)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYpFPcQAKCRDfioYZHlFs
Z9A3AQCdfoT5sY3OK+I/3oTvJ//6lw2MtXrnXFM046ICKPi9sgD8CzR9mRAHA+vj
kxOtJEU2bA9naninXGORsDUndiNkwQo=
=gVIn
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and DAX updates from Dan Williams:
"New support for clearing memory errors when a file is in DAX mode,
alongside with some other fixes and cleanups.
Previously it was only possible to clear these errors using a truncate
or hole-punch operation to trigger the filesystem to reallocate the
block, now, any page aligned write can opportunistically clear errors
as well.
This change spans x86/mm, nvdimm, and fs/dax, and has received the
appropriate sign-offs. Thanks to Jane for her work on this.
Summary:
- Add support for clearing memory error via pwrite(2) on DAX
- Fix 'security overwrite' support in the presence of media errors
- Miscellaneous cleanups and fixes for nfit_test (nvdimm unit tests)"
* tag 'libnvdimm-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
pmem: implement pmem_recovery_write()
pmem: refactor pmem_clear_poison()
dax: add .recovery_write dax_operation
dax: introduce DAX_RECOVERY_WRITE dax access mode
mce: fix set_mce_nospec to always unmap the whole page
x86/mce: relocate set{clear}_mce_nospec() functions
acpi/nfit: rely on mce->misc to determine poison granularity
testing: nvdimm: asm/mce.h is not needed in nfit.c
testing: nvdimm: iomap: make __nfit_test_ioremap a macro
nvdimm: Allow overwrite in the presence of disabled dimms
tools/testing/nvdimm: remove unneeded flush_workqueue
-----BEGIN PGP SIGNATURE-----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=hEti
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Resource management:
- Restrict E820 clipping to PCI host bridge windows (Bjorn Helgaas)
- Log E820 clipping better (Bjorn Helgaas)
- Add kernel cmdline options to enable/disable E820 clipping (Hans de
Goede)
- Disable E820 reserved region clipping for IdeaPads, Yoga, Yoga
Slip, Acer Spin 5, Clevo Barebone systems where clipping leaves no
usable address space for touchpads, Thunderbolt devices, etc (Hans
de Goede)
- Disable E820 clipping by default starting in 2023 (Hans de Goede)
PCI device hotplug:
- Include files to remove implicit dependencies (Christophe Leroy)
- Only put Root Ports in D3 if they can signal and wake from D3 so
AMD Yellow Carp doesn't miss hotplug events (Mario Limonciello)
Power management:
- Define pci_restore_standard_config() only for CONFIG_PM_SLEEP since
it's unused otherwise (Krzysztof Kozlowski)
- Power up devices completely, including anything platform firmware
needs to do, during runtime resume (Rafael J. Wysocki)
- Move pci_resume_bus() to PM callbacks so we observe the required
bridge power-up delays (Rafael J. Wysocki)
- Drop unneeded runtime_d3cold device flag (Rafael J. Wysocki)
- Split pci_raw_set_power_state() between pci_power_up() and a new
pci_set_low_power_state() (Rafael J. Wysocki)
- Set current_state to D3cold if config read returns ~0, indicating
the device is not accessible (Rafael J. Wysocki)
- Do not call pci_update_current_state() from pci_power_up() so BARs
and ASPM config are restored correctly (Rafael J. Wysocki)
- Write 0 to PMCSR in pci_power_up() in all cases (Rafael J. Wysocki)
- Split pci_power_up() to pci_set_full_power_state() to avoid some
redundant operations (Rafael J. Wysocki)
- Skip restoring BARs if device is not in D0 (Rafael J. Wysocki)
- Rearrange and clarify pci_set_power_state() (Rafael J. Wysocki)
- Remove redundant BAR restores from pci_pm_thaw_noirq() (Rafael J.
Wysocki)
Virtualization:
- Acquire device lock before config space access lock to avoid AB/BA
deadlock with sriov_numvfs_store() (Yicong Yang)
Error handling:
- Clear MULTI_ERR_COR/UNCOR_RCV bits, which a race could previously
leave permanently set (Kuppuswamy Sathyanarayanan)
Peer-to-peer DMA:
- Whitelist Intel Skylake-E Root Ports regardless of which devfn they
are (Shlomo Pongratz)
ASPM:
- Override L1 acceptable latency advertised by Intel DG2 so ASPM L1
can be enabled (Mika Westerberg)
Cadence PCIe controller driver:
- Set up device-specific register to allow PTM Responder to be
enabled by the normal architected bit (Christian Gmeiner)
- Override advertised FLR support since the controller doesn't
implement FLR correctly (Parshuram Thombare)
Cadence PCIe endpoint driver:
- Correct bitmap size for the ob_region_map of outbound window usage
(Dan Carpenter)
Freescale i.MX6 PCIe controller driver:
- Fix PERST# assertion/deassertion so we observe the required delays
before accessing device (Francesco Dolcini)
Freescale Layerscape PCIe controller driver:
- Add "big-endian" DT property (Hou Zhiqiang)
- Update SCFG DT property (Hou Zhiqiang)
- Add "aer", "pme", "intr" DT properties (Li Yang)
- Add DT compatible strings for ls1028a (Xiaowei Bao)
Intel VMD host bridge driver:
- Assign VMD IRQ domain before enumeration to avoid IOMMU interrupt
remapping errors when MSI-X remapping is disabled (Nirmal Patel)
- Revert VMD workaround that kept MSI-X remapping enabled when IOMMU
remapping was enabled (Nirmal Patel)
Marvell MVEBU PCIe controller driver:
- Add of_pci_get_slot_power_limit() to parse the
'slot-power-limit-milliwatt' DT property (Pali Rohár)
- Add mvebu support for sending Set_Slot_Power_Limit message (Pali
Rohár)
MediaTek PCIe controller driver:
- Fix refcount leak in mtk_pcie_subsys_powerup() (Miaoqian Lin)
MediaTek PCIe Gen3 controller driver:
- Reset PHY and MAC at probe time (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add chained_irq_enter()/chained_irq_exit() calls to mc_handle_msi()
and mc_handle_intx() to avoid lost interrupts (Conor Dooley)
- Fix interrupt handling race (Daire McNamara)
NVIDIA Tegra194 PCIe controller driver:
- Drop tegra194 MSI register save/restore, which is unnecessary since
the DWC core does it (Jisheng Zhang)
Qualcomm PCIe controller driver:
- Add SM8150 SoC DT binding and support (Bhupesh Sharma)
- Fix pipe clock imbalance (Johan Hovold)
- Fix runtime PM imbalance on probe errors (Johan Hovold)
- Fix PHY init imbalance on probe errors (Johan Hovold)
- Convert DT binding to YAML (Dmitry Baryshkov)
- Update DT binding to show that resets aren't required for
MSM8996/APQ8096 platforms (Dmitry Baryshkov)
- Add explicit register names per chipset in DT binding (Dmitry
Baryshkov)
- Add sc7280-specific clock and reset definitions to DT binding
(Dmitry Baryshkov)
Rockchip PCIe controller driver:
- Fix bitmap size when searching for free outbound region (Dan
Carpenter)
Rockchip DesignWare PCIe controller driver:
- Remove "snps,dw-pcie" from rockchip-dwc DT "compatible" property
because it's not fully compatible with rockchip (Peter Geis)
- Reset rockchip-dwc controller at probe (Peter Geis)
- Add rockchip-dwc INTx support (Peter Geis)
Synopsys DesignWare PCIe controller driver:
- Return error instead of success if DMA mapping of MSI area fails
(Jiantao Zhang)
Miscellaneous:
- Change pci_set_dma_mask() documentation references to
dma_set_mask() (Alex Williamson)"
* tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (64 commits)
dt-bindings: PCI: qcom: Add schema for sc7280 chipset
dt-bindings: PCI: qcom: Specify reg-names explicitly
dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms
dt-bindings: PCI: qcom: Convert to YAML
PCI: qcom: Fix unbalanced PHY init on probe errors
PCI: qcom: Fix runtime PM imbalance on probe errors
PCI: qcom: Fix pipe clock imbalance
PCI: qcom: Add SM8150 SoC support
dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC
x86/PCI: Disable E820 reserved region clipping starting in 2023
x86/PCI: Disable E820 reserved region clipping via quirks
x86/PCI: Add kernel cmdline options to use/ignore E820 reserved regions
PCI: microchip: Fix potential race in interrupt handling
PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bits
PCI: cadence: Clear FLR in device capabilities register
PCI: cadence: Allow PTM Responder to be enabled
PCI: vmd: Revert 2565e5b69c ("PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU.")
PCI: vmd: Assign VMD IRQ domain before enumeration
PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store()
PCI: rockchip-dwc: Add legacy interrupt support
...
for -stable. The remainder address pre-5.19 issues and are cc:stable.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYpEC8gAKCRDdBJ7gKXxA
jlukAQDCaXF7YTBjpoaAl0zhSu+5h7CawiB6cnRlq87/uJ2S4QD/eLVX3zfxI2DX
YcOhc5H8BOgZ8ppD80Nv9qjmyvEWzAA=
=ZFFG
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-05-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Six hotfixes.
The page_table_check one from Miaohe Lin is considered a minor thing
so it isn't marked for -stable. The remainder address pre-5.19 issues
and are cc:stable"
* tag 'mm-hotfixes-stable-2022-05-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/page_table_check: fix accessing unmapped ptep
kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add]
mm/page_alloc: always attempt to allocate at least one page during bulk allocation
hugetlb: fix huge_pmd_unshare address update
zsmalloc: fix races between asynchronous zspage free and page migration
Revert "mm/cma.c: remove redundant cma_mutex lock"
Since commit d1bcae833b32f1 ("ELF: Don't generate unused section
symbols") [1], binutils (v2.36+) started dropping section symbols that
it thought were unused. This isn't an issue in general, but with
kexec_file.c, gcc is placing kexec_arch_apply_relocations[_add] into a
separate .text.unlikely section and the section symbol ".text.unlikely"
is being dropped. Due to this, recordmcount is unable to find a non-weak
symbol in .text.unlikely to generate a relocation record against.
Address this by dropping the weak attribute from these functions.
Instead, follow the existing pattern of having architectures #define the
name of the function they want to override in their headers.
[1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d1bcae833b32f1
[akpm@linux-foundation.org: arch/s390/include/asm/kexec.h needs linux/module.h]
Link: https://lkml.kernel.org/r/20220519091237.676736-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As x86 uses the <asm-generic/bitops/instrumented-*.h> headers, the
regular forms of all bitops are instrumented with explicit calls to
KASAN and KCSAN checks. As these are explicit calls, these are not
suppressed by the noinstr function attribute.
This can result in calls to those check functions in noinstr code, which
objtool warns about:
vmlinux.o: warning: objtool: enter_from_user_mode+0x24: call to __kcsan_check_access() leaves .noinstr.text section
vmlinux.o: warning: objtool: syscall_enter_from_user_mode+0x28: call to __kcsan_check_access() leaves .noinstr.text section
vmlinux.o: warning: objtool: syscall_enter_from_user_mode_prepare+0x24: call to __kcsan_check_access() leaves .noinstr.text section
vmlinux.o: warning: objtool: irqentry_enter_from_user_mode+0x24: call to __kcsan_check_access() leaves .noinstr.text section
Prevent this by using the arch_*() bitops, which are the underlying
bitops without explciit instrumentation.
[null: Changelog]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220502111216.290518605@infradead.org
* ultravisor communication device driver
* fix TEID on terminating storage key ops
RISC-V:
* Added Sv57x4 support for G-stage page table
* Added range based local HFENCE functions
* Added remote HFENCE functions based on VCPU requests
* Added ISA extension registers in ONE_REG interface
* Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
* Add support for the ARMv8.6 WFxT extension
* Guard pages for the EL2 stacks
* Trap and emulate AArch32 ID registers to hide unsupported features
* Ability to select and save/restore the set of hypercalls exposed
to the guest
* Support for PSCI-initiated suspend in collaboration with userspace
* GICv3 register-based LPI invalidation support
* Move host PMU event merging into the vcpu data structure
* GICv3 ITS save/restore fixes
* The usual set of small-scale cleanups and fixes
x86:
* New ioctls to get/set TSC frequency for a whole VM
* Allow userspace to opt out of hypercall patching
* Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
* Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
* V_TSC_AUX support
Nested virtualization improvements for AMD:
* Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
* Allow AVIC to co-exist with a nested guest running
* Fixes for LBR virtualizations when a nested guest is running,
and nested LBR virtualization support
* PAUSE filtering for nested hypervisors
Guest support:
* Decoupling of vcpu_is_preempted from PV spinlocks
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKN9M4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNLeAf+KizAlQwxEehHHeNyTkZuKyMawrD6
zsqAENR6i1TxiXe7fDfPFbO2NR0ZulQopHbD9mwnHJ+nNw0J4UT7g3ii1IAVcXPu
rQNRGMVWiu54jt+lep8/gDg0JvPGKVVKLhxUaU1kdWT9PhIOC6lwpP3vmeWkUfRi
PFL/TMT0M8Nfryi0zHB0tXeqg41BiXfqO8wMySfBAHUbpv8D53D2eXQL6YlMM0pL
2quB1HxHnpueE5vj3WEPQ3PCdy1M2MTfCDBJAbZGG78Ljx45FxSGoQcmiBpPnhJr
C6UGP4ZDWpml5YULUoA70k5ylCbP+vI61U4vUtzEiOjHugpPV5wFKtx5nw==
=ozWx
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
file-backed transparent hugepages.
Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for runtime
enablement of the recent huge page vmemmap optimization feature.
Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
David Vernet has done some fixup work on the memcg selftests.
Peter Xu has taught userfaultfd to handle write protection faults against
shmem- and hugetlbfs-backed files.
More DAMON development from SeongJae Park - adding online tuning of the
feature and support for monitoring of fixed virtual address ranges. Also
easier discovery of which monitoring operations are available.
Nadav Amit has done some optimization of TLB flushing during mprotect().
Neil Brown continues to labor away at improving our swap-over-NFS support.
David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
Peng Liu fixed some errors in the core hugetlb code.
Joao Martins has reduced the amount of memory consumed by device-dax's
compound devmaps.
Some cleanups of the arch-specific pagemap code from Anshuman Khandual.
Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
Roman Gushchin has done more work on the memcg selftests.
And, of course, many smaller fixes and cleanups. Notably, the customary
million cleanup serieses from Miaohe Lin.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYo52xQAKCRDdBJ7gKXxA
jtJFAQD238KoeI9z5SkPMaeBRYSRQmNll85mxs25KapcEgWgGQD9FAb7DJkqsIVk
PzE+d9hEfirUGdL6cujatwJ6ejYR8Q8=
=nFe6
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
- don't over-decrypt memory (Robin Murphy)
- takes min align mask into account for the swiotlb max mapping size
(Tianyu Lan)
- use GFP_ATOMIC in dma-debug (Mikulas Patocka)
- fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me)
- don't fail on highmem CMA pages in dma_direct_alloc_pages (me)
- cleanup swiotlb initialization and share more code with swiotlb-xen
(me, Stefano Stabellini)
-----BEGIN PGP SIGNATURE-----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=n2rk
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- don't over-decrypt memory (Robin Murphy)
- takes min align mask into account for the swiotlb max mapping size
(Tianyu Lan)
- use GFP_ATOMIC in dma-debug (Mikulas Patocka)
- fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me)
- don't fail on highmem CMA pages in dma_direct_alloc_pages (me)
- cleanup swiotlb initialization and share more code with swiotlb-xen
(me, Stefano Stabellini)
* tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping: (23 commits)
dma-direct: don't over-decrypt memory
swiotlb: max mapping size takes min align mask into account
swiotlb: use the right nslabs-derived sizes in swiotlb_init_late
swiotlb: use the right nslabs value in swiotlb_init_remap
swiotlb: don't panic when the swiotlb buffer can't be allocated
dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC
dma-direct: don't fail on highmem CMA pages in dma_direct_alloc_pages
swiotlb-xen: fix DMA_ATTR_NO_KERNEL_MAPPING on arm
x86: remove cruft from <asm/dma-mapping.h>
swiotlb: remove swiotlb_init_with_tbl and swiotlb_init_late_with_tbl
swiotlb: merge swiotlb-xen initialization into swiotlb
swiotlb: provide swiotlb_init variants that remap the buffer
swiotlb: pass a gfp_mask argument to swiotlb_init_late
swiotlb: add a SWIOTLB_ANY flag to lift the low memory restriction
swiotlb: make the swiotlb_init interface more useful
x86: centralize setting SWIOTLB_FORCE when guest memory encryption is enabled
x86: remove the IOMMU table infrastructure
MIPS/octeon: use swiotlb_init instead of open coding it
arm/xen: don't check for xen_initial_domain() in xen_create_contiguous_region
swiotlb: rename swiotlb_late_init_with_default_size
...
Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding
to very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space
to remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections
that have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting.
This makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core
from Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Wjii
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"
* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed
to the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=mh7W
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 5.19
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed
to the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
[Due to the conflict, KVM_SYSTEM_EVENT_SEV_TERM is relocated
from 4 to 6. - Paolo]
- Update the Energy Model support code to allow the Energy Model to be
artificial, which means that the power values may not be on a uniform
scale with other devices providing power information, and update the
cpufreq_cooling and devfreq_cooling thermal drivers to support
artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown,
Dan Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen
Yu).
-----BEGIN PGP SIGNATURE-----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=Hewm
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add support for 'artificial' Energy Models in which power
numbers for different entities may be in different scales, add support
for some new hardware, fix bugs and clean up code in multiple places.
Specifics:
- Update the Energy Model support code to allow the Energy Model to
be artificial, which means that the power values may not be on a
uniform scale with other devices providing power information, and
update the cpufreq_cooling and devfreq_cooling thermal drivers to
support artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz
Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang
Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe
Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown, Dan
Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)"
* tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits)
PM: domains: Trust domain-idle-states from DT to be correct by genpd
PM: domains: Measure power-on/off latencies in genpd based on a governor
PM: domains: Allocate governor data dynamically based on a genpd governor
PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()
PM: domains: Fix initialization of genpd's next_wakeup
PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd
PM: domains: Measure suspend/resume latencies in genpd based on governor
PM: domains: Move the next_wakeup variable into the struct gpd_timing_data
PM: domains: Allocate gpd_timing_data dynamically based on governor
PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain()
PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd
PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd
PM: domains: Drop redundant code for genpd always-on governor
PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor
powercap: intel_rapl: remove redundant store to value after multiply
cpufreq: CPPC: Enable dvfs_possible_from_any_cpu
cpufreq: CPPC: Enable fast_switch
ACPI: CPPC: Assume no transition latency if no PCCT
ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported
ACPI: CPPC: Check _OSC for flexible address space
...
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEq5lC5tSkz8NBJiCnSfxwEqXeA64FAmKKpM8ACgkQSfxwEqXe
A6726w/+OJimGd4arvpSmdn+vxepSyDLgKfwM0x5zprRVd16xg8CjJr4eMonTesq
YvtJRqpetb53MB+sMhutlvQqQzrjtf2MBkgPwF4I2gUrk7vLD45Q+AGdGhi/rUwz
wHGA7xg1FHLHia2M/9idSqi8QlZmUP4u4l5ZnMyTUHiwvRD6XOrWKfqvUSawNzyh
hCWlTUxDrjizsW5YpsJX/MkRadSC8loJEk5ByZebow6nRPfurJvqfrcOMgHyNrbY
pOZ/CGPxcetMqotL2TuuJt5wKmenqYhIWGAp3YM2SWWgU2ueBZekW8AYeMfgUcvh
LWV93RpSuAnE5wsdjIULvjFnEDJBf8ihfMnMrd9G5QjQu44tuKWfY2MghLSpYzaR
V6UFbRmhrqhqiStHQXOvk1oqxtpbHlc9zzJLmvPmDJcbvzXQ9Opk5GVXAmdtnHnj
M/ty3wGWxucY6mHqT8MkCShSSslbgEtc1pEIWHdrUgnaiSVoCVBEO+9LqLbjvOTm
XA/6YtoiCE5FasK51pir1zVb2GORQn0v8HnuAOsusD/iPAlRQ/G5jZkaXbwRQI6j
atYL1svqvSKn5POnzqAlMUXfMUr19K5xqJdp7i6qmlO1Vq6Z+tWbCQgD1JV+Wjkb
CMyvXomFCFu4aYKGRE2SBRnWLRghG3kYHqEQ15yTPMQerxbUDNg=
=SUr3
-----END PGP SIGNATURE-----
Merge tag 'random-5.19-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"These updates continue to refine the work began in 5.17 and 5.18 of
modernizing the RNG's crypto and streamlining and documenting its
code.
New for 5.19, the updates aim to improve entropy collection methods
and make some initial decisions regarding the "premature next" problem
and our threat model. The cloc utility now reports that random.c is
931 lines of code and 466 lines of comments, not that basic metrics
like that mean all that much, but at the very least it tells you that
this is very much a manageable driver now.
Here's a summary of the various updates:
- The random_get_entropy() function now always returns something at
least minimally useful. This is the primary entropy source in most
collectors, which in the best case expands to something like RDTSC,
but prior to this change, in the worst case it would just return 0,
contributing nothing. For 5.19, additional architectures are wired
up, and architectures that are entirely missing a cycle counter now
have a generic fallback path, which uses the highest resolution
clock available from the timekeeping subsystem.
Some of those clocks can actually be quite good, despite the CPU
not having a cycle counter of its own, and going off-core for a
stamp is generally thought to increase jitter, something positive
from the perspective of entropy gathering. Done very early on in
the development cycle, this has been sitting in next getting some
testing for a while now and has relevant acks from the archs, so it
should be pretty well tested and fine, but is nonetheless the thing
I'll be keeping my eye on most closely.
- Of particular note with the random_get_entropy() improvements is
MIPS, which, on CPUs that lack the c0 count register, will now
combine the high-speed but short-cycle c0 random register with the
lower-speed but long-cycle generic fallback path.
- With random_get_entropy() now always returning something useful,
the interrupt handler now collects entropy in a consistent
construction.
- Rather than comparing two samples of random_get_entropy() for the
jitter dance, the algorithm now tests many samples, and uses the
amount of differing ones to determine whether or not jitter entropy
is usable and how laborious it must be. The problem with comparing
only two samples was that if the cycle counter was extremely slow,
but just so happened to be on the cusp of a change, the slowness
wouldn't be detected. Taking many samples fixes that to some
degree.
This, combined with the other improvements to random_get_entropy(),
should make future unification of /dev/random and /dev/urandom
maybe more possible. At the very least, were we to attempt it again
today (we're not), it wouldn't break any of Guenter's test rigs
that broke when we tried it with 5.18. So, not today, but perhaps
down the road, that's something we can revisit.
- We attempt to reseed the RNG immediately upon waking up from system
suspend or hibernation, making use of the various timestamps about
suspend time and such available, as well as the usual inputs such
as RDRAND when available.
- Batched randomness now falls back to ordinary randomness before the
RNG is initialized. This provides more consistent guarantees to the
types of random numbers being returned by the various accessors.
- The "pre-init injection" code is now gone for good. I suspect you
in particular will be happy to read that, as I recall you
expressing your distaste for it a few months ago. Instead, to avoid
a "premature first" issue, while still allowing for maximal amount
of entropy availability during system boot, the first 128 bits of
estimated entropy are used immediately as it arrives, with the next
128 bits being buffered. And, as before, after the RNG has been
fully initialized, it winds up reseeding anyway a few seconds later
in most cases. This resulted in a pretty big simplification of the
initialization code and let us remove various ad-hoc mechanisms
like the ugly crng_pre_init_inject().
- The RNG no longer pretends to handle the "premature next" security
model, something that various academics and other RNG designs have
tried to care about in the past. After an interesting mailing list
thread, these issues are thought to be a) mainly academic and not
practical at all, and b) actively harming the real security of the
RNG by delaying new entropy additions after a potential compromise,
making a potentially bad situation even worse. As well, in the
first place, our RNG never even properly handled the premature next
issue, so removing an incomplete solution to a fake problem was
particularly nice.
This allowed for numerous other simplifications in the code, which
is a lot cleaner as a consequence. If you didn't see it before,
https://lore.kernel.org/lkml/YmlMGx6+uigkGiZ0@zx2c4.com/ may be a
thread worth skimming through.
- While the interrupt handler received a separate code path years ago
that avoids locks by using per-cpu data structures and a faster
mixing algorithm, in order to reduce interrupt latency, input and
disk events that are triggered in hardirq handlers were still
hitting locks and more expensive algorithms. Those are now
redirected to use the faster per-cpu data structures.
- Rather than having the fake-crypto almost-siphash-based random32
implementation be used right and left, and in many places where
cryptographically secure randomness is desirable, the batched
entropy code is now fast enough to replace that.
- As usual, numerous code quality and documentation cleanups. For
example, the initialization state machine now uses enum symbolic
constants instead of just hard coding numbers everywhere.
- Since the RNG initializes once, and then is always initialized
thereafter, a pretty heavy amount of code used during that
initialization is never used again. It is now completely cordoned
off using static branches and it winds up in the .text.unlikely
section so that it doesn't reduce cache compactness after the RNG
is ready.
- A variety of functions meant for waiting on the RNG to be
initialized were only used by vsprintf, and in not a particularly
optimal way. Replacing that usage with a more ordinary setup made
it possible to remove those functions.
- A cleanup of how we warn userspace about the use of uninitialized
/dev/urandom and uninitialized get_random_bytes() usage.
Interestingly, with the change you merged for 5.18 that attempts to
use jitter (but does not block if it can't), the majority of users
should never see those warnings for /dev/urandom at all now, and
the one for in-kernel usage is mainly a debug thing.
- The file_operations struct for /dev/[u]random now implements
.read_iter and .write_iter instead of .read and .write, allowing it
to also implement .splice_read and .splice_write, which makes
splice(2) work again after it was broken here (and in many other
places in the tree) during the set_fs() removal. This was a bit of
a last minute arrival from Jens that hasn't had as much time to
bake, so I'll be keeping my eye on this as well, but it seems
fairly ordinary. Unfortunately, read_iter() is around 3% slower
than read() in my tests, which I'm not thrilled about. But Jens and
Al, spurred by this observation, seem to be making progress in
removing the bottlenecks on the iter paths in the VFS layer in
general, which should remove the performance gap for all drivers.
- Assorted other bug fixes, cleanups, and optimizations.
- A small SipHash cleanup"
* tag 'random-5.19-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (49 commits)
random: check for signals after page of pool writes
random: wire up fops->splice_{read,write}_iter()
random: convert to using fops->write_iter()
random: convert to using fops->read_iter()
random: unify batched entropy implementations
random: move randomize_page() into mm where it belongs
random: remove mostly unused async readiness notifier
random: remove get_random_bytes_arch() and add rng_has_arch_random()
random: move initialization functions out of hot pages
random: make consistent use of buf and len
random: use proper return types on get_random_{int,long}_wait()
random: remove extern from functions in header
random: use static branch for crng_ready()
random: credit architectural init the exact amount
random: handle latent entropy and command line from random_init()
random: use proper jiffies comparison macro
random: remove ratelimiting for in-kernel unseeded randomness
random: move initialization out of reseeding hot path
random: avoid initializing twice in credit race
random: use symbolic constants for crng_init states
...
Platform PMU changes:
=====================
- x86/intel:
- Add new Intel Alder Lake and Raptor Lake support
- x86/amd:
- AMD Zen4 IBS extensions support
- Add AMD PerfMonV2 support
- Add AMD Fam19h Branch Sampling support
Generic changes:
================
- signal: Deliver SIGTRAP on perf event asynchronously if blocked
Perf instrumentation can be driven via SIGTRAP, but this causes a problem
when SIGTRAP is blocked by a task & terminate the task.
Allow user-space to request these signals asynchronously (after they get
unblocked) & also give the information to the signal handler when this
happens:
" To give user space the ability to clearly distinguish synchronous from
asynchronous signals, introduce siginfo_t::si_perf_flags and
TRAP_PERF_FLAG_ASYNC (opted for flags in case more binary information is
required in future).
The resolution to the problem is then to (a) no longer force the signal
(avoiding the terminations), but (b) tell user space via si_perf_flags
if the signal was synchronous or not, so that such signals can be
handled differently (e.g. let user space decide to ignore or consider
the data imprecise). "
- Unify/standardize the /sys/devices/cpu/events/* output format.
- Misc fixes & cleanups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=UqYA
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
"Platform PMU changes:
- x86/intel:
- Add new Intel Alder Lake and Raptor Lake support
- x86/amd:
- AMD Zen4 IBS extensions support
- Add AMD PerfMonV2 support
- Add AMD Fam19h Branch Sampling support
Generic changes:
- signal: Deliver SIGTRAP on perf event asynchronously if blocked
Perf instrumentation can be driven via SIGTRAP, but this causes a
problem when SIGTRAP is blocked by a task & terminate the task.
Allow user-space to request these signals asynchronously (after
they get unblocked) & also give the information to the signal
handler when this happens:
"To give user space the ability to clearly distinguish
synchronous from asynchronous signals, introduce
siginfo_t::si_perf_flags and TRAP_PERF_FLAG_ASYNC (opted for
flags in case more binary information is required in future).
The resolution to the problem is then to (a) no longer force the
signal (avoiding the terminations), but (b) tell user space via
si_perf_flags if the signal was synchronous or not, so that such
signals can be handled differently (e.g. let user space decide
to ignore or consider the data imprecise). "
- Unify/standardize the /sys/devices/cpu/events/* output format.
- Misc fixes & cleanups"
* tag 'perf-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
perf/x86/amd/core: Fix reloading events for SVM
perf/x86/amd: Run AMD BRS code only on supported hw
perf/x86/amd: Fix AMD BRS period adjustment
perf/x86/amd: Remove unused variable 'hwc'
perf/ibs: Fix comment
perf/amd/ibs: Advertise zen4_ibs_extensions as pmu capability attribute
perf/amd/ibs: Add support for L3 miss filtering
perf/amd/ibs: Use ->is_visible callback for dynamic attributes
perf/amd/ibs: Cascade pmu init functions' return value
perf/x86/uncore: Add new Alder Lake and Raptor Lake support
perf/x86/uncore: Clean up uncore_pci_ids[]
perf/x86/cstate: Add new Alder Lake and Raptor Lake support
perf/x86/msr: Add new Alder Lake and Raptor Lake support
perf/x86: Add new Alder Lake and Raptor Lake support
perf/amd/ibs: Use interrupt regs ip for stack unwinding
perf/x86/amd/core: Add PerfMonV2 overflow handling
perf/x86/amd/core: Add PerfMonV2 counter control
perf/x86/amd/core: Detect available counters
perf/x86/amd/core: Detect PerfMonV2 support
x86/msr: Add PerfCntrGlobal* registers
...
- Comprehensive interface overhaul:
=================================
Objtool's interface has some issues:
- Several features are done unconditionally, without any way to turn
them off. Some of them might be surprising. This makes objtool
tricky to use, and prevents porting individual features to other
arches.
- The config dependencies are too coarse-grained. Objtool enablement is
tied to CONFIG_STACK_VALIDATION, but it has several other features
independent of that.
- The objtool subcmds ("check" and "orc") are clumsy: "check" is really
a subset of "orc", so it has all the same options. The subcmd model
has never really worked for objtool, as it only has a single purpose:
"do some combination of things on an object file".
- The '--lto' and '--vmlinux' options are nonsensical and have
surprising behavior.
Overhaul the interface:
- get rid of subcmds
- make all features individually selectable
- remove and/or clarify confusing/obsolete options
- update the documentation
- fix some bugs found along the way
- Fix x32 regression
- Fix Kbuild cleanup bugs
- Add scripts/objdump-func helper script to disassemble a single function from an object file.
- Rewrite scripts/faddr2line to be section-aware, by basing it on 'readelf',
moving it away from 'nm', which doesn't handle multiple sections well,
which can result in decoding failure.
- Rewrite & fix symbol handling - which had a number of bugs wrt. object files
that don't have global symbols - which is rare but possible. Also fix a
bunch of symbol handling bugs found along the way.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ARdm
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Comprehensive interface overhaul:
=================================
Objtool's interface has some issues:
- Several features are done unconditionally, without any way to
turn them off. Some of them might be surprising. This makes
objtool tricky to use, and prevents porting individual features
to other arches.
- The config dependencies are too coarse-grained. Objtool
enablement is tied to CONFIG_STACK_VALIDATION, but it has several
other features independent of that.
- The objtool subcmds ("check" and "orc") are clumsy: "check" is
really a subset of "orc", so it has all the same options.
The subcmd model has never really worked for objtool, as it only
has a single purpose: "do some combination of things on an object
file".
- The '--lto' and '--vmlinux' options are nonsensical and have
surprising behavior.
Overhaul the interface:
- get rid of subcmds
- make all features individually selectable
- remove and/or clarify confusing/obsolete options
- update the documentation
- fix some bugs found along the way
- Fix x32 regression
- Fix Kbuild cleanup bugs
- Add scripts/objdump-func helper script to disassemble a single
function from an object file.
- Rewrite scripts/faddr2line to be section-aware, by basing it on
'readelf', moving it away from 'nm', which doesn't handle multiple
sections well, which can result in decoding failure.
- Rewrite & fix symbol handling - which had a number of bugs wrt.
object files that don't have global symbols - which is rare but
possible. Also fix a bunch of symbol handling bugs found along the
way.
* tag 'objtool-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
objtool: Fix objtool regression on x32 systems
objtool: Fix symbol creation
scripts/faddr2line: Fix overlapping text section failures
scripts: Create objdump-func helper script
objtool: Remove libsubcmd.a when make clean
objtool: Remove inat-tables.c when make clean
objtool: Update documentation
objtool: Remove --lto and --vmlinux in favor of --link
objtool: Add HAVE_NOINSTR_VALIDATION
objtool: Rename "VMLINUX_VALIDATION" -> "NOINSTR_VALIDATION"
objtool: Make noinstr hacks optional
objtool: Make jump label hack optional
objtool: Make static call annotation optional
objtool: Make stack validation frame-pointer-specific
objtool: Add CONFIG_OBJTOOL
objtool: Extricate sls from stack validation
objtool: Rework ibt and extricate from stack validation
objtool: Make stack validation optional
objtool: Add option to print section addresses
objtool: Don't print parentheses in function addresses
...
- rwsem cleanups & optimizations/fixes:
- Conditionally wake waiters in reader/writer slowpaths
- Always try to wake waiters in out_nolock path
- Add try_cmpxchg64() implementation, with arch optimizations - and use it to
micro-optimize sched_clock_{local,remote}()
- Various force-inlining fixes to address objdump instrumentation-check warnings
- Add lock contention tracepoints:
lock:contention_begin
lock:contention_end
- Misc smaller fixes & cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=gaS5
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- rwsem cleanups & optimizations/fixes:
- Conditionally wake waiters in reader/writer slowpaths
- Always try to wake waiters in out_nolock path
- Add try_cmpxchg64() implementation, with arch optimizations - and use
it to micro-optimize sched_clock_{local,remote}()
- Various force-inlining fixes to address objdump instrumentation-check
warnings
- Add lock contention tracepoints:
lock:contention_begin
lock:contention_end
- Misc smaller fixes & cleanups
* tag 'locking-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/clock: Use try_cmpxchg64 in sched_clock_{local,remote}
locking/atomic/x86: Introduce arch_try_cmpxchg64
locking/atomic: Add generic try_cmpxchg64 support
futex: Remove a PREEMPT_RT_FULL reference.
locking/qrwlock: Change "queue rwlock" to "queued rwlock"
lockdep: Delete local_irq_enable_in_hardirq()
locking/mutex: Make contention tracepoints more consistent wrt adaptive spinning
locking: Apply contention tracepoints in the slow path
locking: Add lock contention tracepoints
locking/rwsem: Always try to wake waiters in out_nolock path
locking/rwsem: Conditionally wake waiters in reader/writer slowpaths
locking/rwsem: No need to check for handoff bit if wait queue empty
lockdep: Fix -Wunused-parameter for _THIS_IP_
x86/mm: Force-inline __phys_addr_nodebug()
x86/kvm/svm: Force-inline GHCB accessors
task_stack, x86/cea: Force-inline stack helpers
All three versions of klp_arch_set_pc() do exactly the same: they
call ftrace_instruction_pointer_set().
Call ftrace_instruction_pointer_set() directly and remove
klp_arch_set_pc().
As klp_arch_set_pc() was the only thing remaining in asm/livepatch.h
on x86 and s390, remove asm/livepatch.h
livepatch.h remains on powerpc but its content is exclusively used
by powerpc specific code.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Petr Mladek <pmladek@suse.com>
- Make use of the IBM z16 processor activity instrumentation facility
to count cryptography operations: add a new PMU device driver so
that perf can make use of this.
- Add new IBM z16 extended counter set to cpumf support.
- Add vdso randomization support.
- Add missing KCSAN instrumentation to barriers and spinlocks, which
should make s390's KCSAN support complete.
- Add support for IPL-complete-control facility: notify the hypervisor
that kexec finished work and the kernel starts.
- Improve error logging for PCI.
- Various small changes to workaround llvm's integrated assembler
limitations, and one bug, to make it finally possible to compile the
kernel with llvm's integrated assembler. This also requires to raise
the minimum clang version to 14.0.0.
- Various other small enhancements, bug fixes, and cleanups all over
the place.
-----BEGIN PGP SIGNATURE-----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=W+1k
-----END PGP SIGNATURE-----
Merge tag 's390-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Make use of the IBM z16 processor activity instrumentation facility
to count cryptography operations: add a new PMU device driver so that
perf can make use of this.
- Add new IBM z16 extended counter set to cpumf support.
- Add vdso randomization support.
- Add missing KCSAN instrumentation to barriers and spinlocks, which
should make s390's KCSAN support complete.
- Add support for IPL-complete-control facility: notify the hypervisor
that kexec finished work and the kernel starts.
- Improve error logging for PCI.
- Various small changes to workaround llvm's integrated assembler
limitations, and one bug, to make it finally possible to compile the
kernel with llvm's integrated assembler. This also requires to raise
the minimum clang version to 14.0.0.
- Various other small enhancements, bug fixes, and cleanups all over
the place.
* tag 's390-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
s390/head: get rid of 31 bit leftovers
scripts/min-tool-version.sh: raise minimum clang version to 14.0.0 for s390
s390/boot: do not emit debug info for assembly with llvm's IAS
s390/boot: workaround llvm IAS bug
s390/purgatory: workaround llvm's IAS limitations
s390/entry: workaround llvm's IAS limitations
s390/alternatives: remove padding generation code
s390/alternatives: provide identical sized orginal/alternative sequences
s390/cpumf: add new extended counter set for IBM z16
s390/preempt: disable __preempt_count_add() optimization for PROFILE_ALL_BRANCHES
s390/stp: clock_delta should be signed
s390/stp: fix todoff size
s390/pai: add support for cryptography counters
entry: Rename arch_check_user_regs() to arch_enter_from_user_mode()
s390/compat: cleanup compat_linux.h header file
s390/entry: remove broken and not needed code
s390/boot: convert parmarea to C
s390/boot: convert initial lowcore to C
s390/ptrace: move short psw definitions to ptrace header file
s390/head: initialize all new psws
...
Highlights:
- New drivers:
- Intel "In Field Scan" (IFS) support
- Winmate FM07/FM07P buttons
- Mellanox SN2201 support
- AMD PMC driver enhancements
- Lots of various other small fixes and hardware-id additions
The following is an automated git shortlog grouped by driver:
Documentation:
- In-Field Scan
Documentation/ABI:
- Add new attributes for mlxreg-io sysfs interfaces
- sysfs-class-firmware-attributes: Misc. cleanups
- sysfs-class-firmware-attributes: Fix Sphinx errors
- sysfs-driver-intel_sdsi: Fix sphinx warnings
acerhdf:
- Cleanup str_starts_with()
amd-pmc:
- Fix build error unused-function
- Shuffle location of amd_pmc_get_smu_version()
- Avoid reading SMU version at probe time
- Move FCH init to first use
- Move SMU logging setup out of init
- Fix compilation without CONFIG_SUSPEND
amd_hsmp:
- Add HSMP protocol version 5 messages
asus-nb-wmi:
- Add keymap for MyASUS key
asus-wmi:
- Update unknown code message
- Use kobj_to_dev()
- Fix driver not binding when fan curve control probe fails
- Potential buffer overflow in asus_wmi_evaluate_method_buf()
barco-p50-gpio:
- Fix duplicate included linux/io.h
dell-laptop:
- Add quirk entry for Latitude 7520
gigabyte-wmi:
- Add support for Z490 AORUS ELITE AC and X570 AORUS ELITE WIFI
- added support for B660 GAMING X DDR4 motherboard
hp-wmi:
- Correct code style related issues
intel-hid:
- fix _DSM function index handling
intel-uncore-freq:
- Prevent driver loading in guests
intel_cht_int33fe:
- Set driver data
platform/mellanox:
- Add support for new SN2201 system
platform/surface:
- aggregator: Fix initialization order when compiling as builtin module
- gpe: Add support for Surface Pro 8
platform/x86/dell:
- add buffer allocation/free functions for SMI calls
platform/x86/intel:
- Fix 'rmmod pmt_telemetry' panic
- pmc/core: Use kobj_to_dev()
- pmc/core: change pmc_lpm_modes to static
platform/x86/intel/ifs:
- Add CPU_SUP_INTEL dependency
- add ABI documentation for IFS
- Add IFS sysfs interface
- Add scan test support
- Authenticate and copy to secured memory
- Check IFS Image sanity
- Read IFS firmware image
- Add stub driver for In-Field Scan
platform/x86/intel/sdsi:
- Fix bug in multi packet reads
- Poll on ready bit for writes
- Handle leaky bucket
platform_data/mlxreg:
- Add field for notification callback
pmc_atom:
- dont export pmc_atom_read - no modular users
- remove unused pmc_atom_write()
samsung-laptop:
- use kobj_to_dev()
- Fix an unsigned comparison which can never be negative
stop_machine:
- Add stop_core_cpuslocked() for per-core operations
think-lmi:
- certificate support clean ups
thinkpad_acpi:
- Correct dual fan probe
- Add a s2idle resume quirk for a number of laptops
- Convert btusb DMI list to quirks
tools/power/x86/intel-speed-select:
- Fix warning for perf_cap.cpu
- Display error on turbo mode disabled
- fix build failure when using -Wl,--as-needed
toshiba_acpi:
- use kobj_to_dev()
trace:
- platform/x86/intel/ifs: Add trace point to track Intel IFS operations
winmate-fm07-keys:
- Winmate FM07/FM07P buttons
wmi:
- replace usage of found with dedicated list iterator variable
x86/microcode/intel:
- Expose collect_cpu_info_early() for IFS
x86/msr-index:
- Define INTEGRITY_CAPABILITIES MSR
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmKKlA0UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9w0Iwf+PYoq7qtU6j6N2f8gL2s65JpKiSPP
CkgnCzTP+khvNnTWMQS8RW9VE6YrHXmN/+d3UAvRrHsOYm3nyZT5aPju9xJ6Xyfn
5ZdMVvYxz7cm3lC6ay8AQt0Cmy6im/+lzP5vA5K68IYh0fPX/dvuOU57pNvXYFfk
Yz5/Gm0t0C4CKVqkcdU/zkNawHP+2+SyQe+Ua2srz7S3DAqUci0lqLr/w9Xk2Yij
nCgEWFB1Qjd2NoyRRe44ksLQ0dXpD4ADDzED+KPp6VTGnw61Eznf9319Z5ONNa/O
VAaSCcDNKps8d3ZpfCpLb3Rs4ztBCkRnkLFczJBgPsBiuDmyTT2/yeEtNg==
=HdEG
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"This includes some small changes to kernel/stop_machine.c and arch/x86
which are deps of the new Intel IFS support.
Highlights:
- New drivers:
- Intel "In Field Scan" (IFS) support
- Winmate FM07/FM07P buttons
- Mellanox SN2201 support
- AMD PMC driver enhancements
- Lots of various other small fixes and hardware-id additions"
* tag 'platform-drivers-x86-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (54 commits)
platform/x86/intel/ifs: Add CPU_SUP_INTEL dependency
platform/x86: intel_cht_int33fe: Set driver data
platform/x86: intel-hid: fix _DSM function index handling
platform/x86: toshiba_acpi: use kobj_to_dev()
platform/x86: samsung-laptop: use kobj_to_dev()
platform/x86: gigabyte-wmi: Add support for Z490 AORUS ELITE AC and X570 AORUS ELITE WIFI
tools/power/x86/intel-speed-select: Fix warning for perf_cap.cpu
tools/power/x86/intel-speed-select: Display error on turbo mode disabled
Documentation: In-Field Scan
platform/x86/intel/ifs: add ABI documentation for IFS
trace: platform/x86/intel/ifs: Add trace point to track Intel IFS operations
platform/x86/intel/ifs: Add IFS sysfs interface
platform/x86/intel/ifs: Add scan test support
platform/x86/intel/ifs: Authenticate and copy to secured memory
platform/x86/intel/ifs: Check IFS Image sanity
platform/x86/intel/ifs: Read IFS firmware image
platform/x86/intel/ifs: Add stub driver for In-Field Scan
stop_machine: Add stop_core_cpuslocked() for per-core operations
x86/msr-index: Define INTEGRITY_CAPABILITIES MSR
x86/microcode/intel: Expose collect_cpu_info_early() for IFS
...
- Remove function export
- Correct asm constraint
- Fix __setup handlers retval
-----BEGIN PGP SIGNATURE-----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=/WGB
-----END PGP SIGNATURE-----
Merge tag 'x86_misc_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
"A variety of fixes which don't fit any other tip bucket:
- Remove unnecessary function export
- Correct asm constraint
- Fix __setup handlers retval"
* tag 'x86_misc_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Cleanup the control_va_addr_alignment() __setup handler
x86: Fix return value of __setup handlers
x86/delay: Fix the wrong asm constraint in delay_loop()
x86/amd_nb: Unexport amd_cache_northbridges()
- Make life miserable for apps using split locks by slowing them down
considerably while the rest of the system remains responsive. The hope
is it will hurt more and people will really fix their misaligned locks
apps. As a result, free a TIF bit.
-----BEGIN PGP SIGNATURE-----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=svvI
-----END PGP SIGNATURE-----
Merge tag 'x86_splitlock_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 splitlock updates from Borislav Petkov:
- Add Raptor Lake to the set of CPU models which support splitlock
- Make life miserable for apps using split locks by slowing them down
considerably while the rest of the system remains responsive. The
hope is it will hurt more and people will really fix their misaligned
locks apps. As a result, free a TIF bit.
* tag 'x86_splitlock_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/split_lock: Enable the split lock feature on Raptor Lake
x86/split-lock: Remove unused TIF_SLD bit
x86/split_lock: Make life miserable for split lockers
allocated and are present when later accessed ("nosmp" and x2APIC)
- Clarify the bit overlap between an old APIC and a modern, integrated one
-----BEGIN PGP SIGNATURE-----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=fkbm
-----END PGP SIGNATURE-----
Merge tag 'x86_apic_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC updates from Borislav Petkov:
- Always do default APIC routing setup so that cpumasks are properly
allocated and are present when later accessed ("nosmp" and x2APIC)
- Clarify the bit overlap between an old APIC and a modern, integrated
one
* tag 'x86_apic_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Do apic driver probe for "nosmp" use case
x86/apic: Clarify i82489DX bit overlap in APIC_LVT0
thus allow for guests to use this compacted XSTATE variant when the
hypervisor exports that support
- A variable shadowing cleanup
-----BEGIN PGP SIGNATURE-----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=eDaz
-----END PGP SIGNATURE-----
Merge tag 'x86_fpu_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Borislav Petkov:
- Add support for XSAVEC - the Compacted XSTATE saving variant - and
thus allow for guests to use this compacted XSTATE variant when the
hypervisor exports that support
- A variable shadowing cleanup
* tag 'x86_fpu_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Cleanup variable shadowing
x86/fpu/xsave: Support XSAVEC in the kernel
needed anymore
- Other misc improvements
-----BEGIN PGP SIGNATURE-----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=CfX1
-----END PGP SIGNATURE-----
Merge tag 'x86_core_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Borislav Petkov:
- Remove all the code around GS switching on 32-bit now that it is not
needed anymore
- Other misc improvements
* tag 'x86_core_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
bug: Use normal relative pointers in 'struct bug_entry'
x86/nmi: Make register_nmi_handler() more robust
x86/asm: Merge load_gs_index()
x86/32: Remove lazy GS macros
ELF: Remove elf_core_copy_kernel_regs()
x86/32: Simplify ELF_CORE_COPY_REGS
frequency invariance code along with removing the need for unnecessary IPIs
- Finally remove a.out support
- The usual trivial cleanups and fixes all over x86
-----BEGIN PGP SIGNATURE-----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=Dks/
-----END PGP SIGNATURE-----
Merge tag 'x86_cleanups_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- Serious sanitization and cleanup of the whole APERF/MPERF and
frequency invariance code along with removing the need for
unnecessary IPIs
- Finally remove a.out support
- The usual trivial cleanups and fixes all over x86
* tag 'x86_cleanups_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86: Remove empty files
x86/speculation: Add missing srbds=off to the mitigations= help text
x86/prctl: Remove pointless task argument
x86/aperfperf: Make it correct on 32bit and UP kernels
x86/aperfmperf: Integrate the fallback code from show_cpuinfo()
x86/aperfmperf: Replace arch_freq_get_on_cpu()
x86/aperfmperf: Replace aperfmperf_get_khz()
x86/aperfmperf: Store aperf/mperf data for cpu frequency reads
x86/aperfmperf: Make parts of the frequency invariance code unconditional
x86/aperfmperf: Restructure arch_scale_freq_tick()
x86/aperfmperf: Put frequency invariance aperf/mperf data into a struct
x86/aperfmperf: Untangle Intel and AMD frequency invariance init
x86/aperfmperf: Separate AP/BP frequency invariance init
x86/smp: Move APERF/MPERF code where it belongs
x86/aperfmperf: Dont wake idle CPUs in arch_freq_get_on_cpu()
x86/process: Fix kernel-doc warning due to a changed function name
x86: Remove a.out support
x86/mm: Replace nodes_weight() with nodes_empty() where appropriate
x86: Replace cpumask_weight() with cpumask_empty() where appropriate
x86/pkeys: Remove __arch_set_user_pkey_access() declaration
...
conventions so that former can be converted to C eventually
- Simplify PUSH_AND_CLEAR_REGS so that it can be used at the system call
entry paths instead of having opencoded, slightly different variants of it
everywhere
- Misc other fixes
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmKLeQEACgkQEsHwGGHe
VUqFqQ/6AkVfWa9EMnmOcFcUYHjK7srsv7kzppc2P6ly98QOJFsCYagPRHVHXGZF
k4Dezk29j2d4AjVdGot/CpTlRezSe0dmPxTcH5QD+SpiJ8bSgMrnH/0La+No0ypi
VabOZgQaHWIUboccpE77oIRdglun/ZnePN3gRdBRtQWgmeQZVWxD6ly6L1Ptp1Lk
nBXVMpH2h5agLjulsw7j7PihrbM6RFf3qSw4GkaQAAxooxb2i7qb05sG347lm72l
3ppsHtP80MKCmJpe20O+V+O4Hvq1/XJ18Tin6p1bhqSe0PW2pS5QUN7ziF/5orvH
9p8PVWrrH6kTaK1NJilGYG4eIeyuWhSVnObgFqbe7RIITy5eCYXyaq5PLqVahWFD
qk1+Z3nsS6g6BLu10dFACnPq7O+6tVEWsoOZ2D4XJAV/zThbEwE75E4rW6x07gnm
s0BzXgtzb0s35L46jzTctc9RtdCRFjZmD+iHXSqjEfH/dyS1tsvXX6z5wBTb5qn3
FQE3sVtZs0e5yIFAfp19hzmweY/Mgu9b1p+IfkhQhInrLyJNwUVsMkpH1WFdkL5/
RZWtURuYO7lE6Iw1wwZPL691A7hx+1cE9YWuEBH2Il6byJa4UWP4azXCx1nbMFKk
E5ZDKL3iRsDPVI+k+D6NwBN19ih2LAmT2Mxcg1EOV434LLlkHsk=
=P80f
-----END PGP SIGNATURE-----
Merge tag 'x86_asm_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Borislav Petkov:
- A bunch of changes towards streamlining low level asm helpers'
calling conventions so that former can be converted to C eventually
- Simplify PUSH_AND_CLEAR_REGS so that it can be used at the system
call entry paths instead of having opencoded, slightly different
variants of it everywhere
- Misc other fixes
* tag 'x86_asm_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Fix register corruption in compat syscall
objtool: Fix STACK_FRAME_NON_STANDARD reloc type
linkage: Fix issue with missing symbol size
x86/entry: Remove skip_r11rcx
x86/entry: Use PUSH_AND_CLEAR_REGS for compat
x86/entry: Simplify entry_INT80_compat()
x86/mm: Simplify RESERVE_BRK()
x86/entry: Convert SWAPGS to swapgs and remove the definition of SWAPGS
x86/entry: Don't call error_entry() for XENPV
x86/entry: Move CLD to the start of the idtentry macro
x86/entry: Move PUSH_AND_CLEAR_REGS out of error_entry()
x86/entry: Switch the stack after error_entry() returns
x86/traps: Use pt_regs directly in fixup_bad_iret()
are not really needed anymore
- Misc fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=7AUX
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CPU feature updates from Borislav Petkov:
- Remove a bunch of chicken bit options to turn off CPU features which
are not really needed anymore
- Misc fixes and cleanups
* tag 'x86_cpu_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation: Add missing prototype for unpriv_ebpf_notify()
x86/pm: Fix false positive kmemleak report in msr_build_context()
x86/speculation/srbds: Do not try to turn mitigation off when not supported
x86/cpu: Remove "noclflush"
x86/cpu: Remove "noexec"
x86/cpu: Remove "nosmep"
x86/cpu: Remove CONFIG_X86_SMAP and "nosmap"
x86/cpu: Remove "nosep"
x86/cpu: Allow feature bit names from /proc/cpuinfo in clearcpuid=
This is the Intel version of a confidential computing solution called
Trust Domain Extensions (TDX). This series adds support to run the
kernel as part of a TDX guest. It provides similar guest protections to
AMD's SEV-SNP like guest memory and register state encryption, memory
integrity protection and a lot more.
Design-wise, it differs from AMD's solution considerably: it uses
a software module which runs in a special CPU mode called (Secure
Arbitration Mode) SEAM. As the name suggests, this module serves as sort
of an arbiter which the confidential guest calls for services it needs
during its lifetime.
Just like AMD's SNP set, this series reworks and streamlines certain
parts of x86 arch code so that this feature can be properly accomodated.
-----BEGIN PGP SIGNATURE-----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=ac9K
-----END PGP SIGNATURE-----
Merge tag 'x86_tdx_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull Intel TDX support from Borislav Petkov:
"Intel Trust Domain Extensions (TDX) support.
This is the Intel version of a confidential computing solution called
Trust Domain Extensions (TDX). This series adds support to run the
kernel as part of a TDX guest. It provides similar guest protections
to AMD's SEV-SNP like guest memory and register state encryption,
memory integrity protection and a lot more.
Design-wise, it differs from AMD's solution considerably: it uses a
software module which runs in a special CPU mode called (Secure
Arbitration Mode) SEAM. As the name suggests, this module serves as
sort of an arbiter which the confidential guest calls for services it
needs during its lifetime.
Just like AMD's SNP set, this series reworks and streamlines certain
parts of x86 arch code so that this feature can be properly
accomodated"
* tag 'x86_tdx_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
x86/tdx: Fix RETs in TDX asm
x86/tdx: Annotate a noreturn function
x86/mm: Fix spacing within memory encryption features message
x86/kaslr: Fix build warning in KASLR code in boot stub
Documentation/x86: Document TDX kernel architecture
ACPICA: Avoid cache flush inside virtual machines
x86/tdx/ioapic: Add shared bit for IOAPIC base address
x86/mm: Make DMA memory shared for TD guest
x86/mm/cpa: Add support for TDX shared memory
x86/tdx: Make pages shared in ioremap()
x86/topology: Disable CPU online/offline control for TDX guests
x86/boot: Avoid #VE during boot for TDX platforms
x86/boot: Set CR0.NE early and keep it set during the boot
x86/acpi/x86/boot: Add multiprocessor wake-up support
x86/boot: Add a trampoline for booting APs via firmware handoff
x86/tdx: Wire up KVM hypercalls
x86/tdx: Port I/O: Add early boot support
x86/tdx: Port I/O: Add runtime hypercalls
x86/boot: Port I/O: Add decompression-time support for TDX
x86/boot: Port I/O: Allow to hook up alternative helpers
...
Add to confidential guests the necessary memory integrity protection
against malicious hypervisor-based attacks like data replay, memory
remapping and others, thus achieving a stronger isolation from the
hypervisor.
At the core of the functionality is a new structure called a reverse
map table (RMP) with which the guest has a say in which pages get
assigned to it and gets notified when a page which it owns, gets
accessed/modified under the covers so that the guest can take an
appropriate action.
In addition, add support for the whole machinery needed to launch a SNP
guest, details of which is properly explained in each patch.
And last but not least, the series refactors and improves parts of the
previous SEV support so that the new code is accomodated properly and
not just bolted on.
-----BEGIN PGP SIGNATURE-----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=Y8kW
-----END PGP SIGNATURE-----
Merge tag 'x86_sev_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull AMD SEV-SNP support from Borislav Petkov:
"The third AMD confidential computing feature called Secure Nested
Paging.
Add to confidential guests the necessary memory integrity protection
against malicious hypervisor-based attacks like data replay, memory
remapping and others, thus achieving a stronger isolation from the
hypervisor.
At the core of the functionality is a new structure called a reverse
map table (RMP) with which the guest has a say in which pages get
assigned to it and gets notified when a page which it owns, gets
accessed/modified under the covers so that the guest can take an
appropriate action.
In addition, add support for the whole machinery needed to launch a
SNP guest, details of which is properly explained in each patch.
And last but not least, the series refactors and improves parts of the
previous SEV support so that the new code is accomodated properly and
not just bolted on"
* tag 'x86_sev_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
x86/entry: Fixup objtool/ibt validation
x86/sev: Mark the code returning to user space as syscall gap
x86/sev: Annotate stack change in the #VC handler
x86/sev: Remove duplicated assignment to variable info
x86/sev: Fix address space sparse warning
x86/sev: Get the AP jump table address from secrets page
x86/sev: Add missing __init annotations to SEV init routines
virt: sevguest: Rename the sevguest dir and files to sev-guest
virt: sevguest: Change driver name to reflect generic SEV support
x86/boot: Put globals that are accessed early into the .data section
x86/boot: Add an efi.h header for the decompressor
virt: sevguest: Fix bool function returning negative value
virt: sevguest: Fix return value check in alloc_shared_pages()
x86/sev-es: Replace open-coded hlt-loop with sev_es_terminate()
virt: sevguest: Add documentation for SEV-SNP CPUID Enforcement
virt: sevguest: Add support to get extended report
virt: sevguest: Add support to derive key
virt: Add SEV-SNP guest driver
x86/sev: Register SEV-SNP guest request platform device
x86/sev: Provide support for SNP guest request NAEs
...
- Cleanup and robustify the PCI interrupt routing table handling
including proper range checks
- Add support for Intel 82378ZB/82379AB, SiS85C497 PIRQ routers
- Fix the ALi M1487 router handling
- Handle the IRT routing table format in AMI BIOSes correctly
-----BEGIN PGP SIGNATURE-----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=zfSD
-----END PGP SIGNATURE-----
Merge tag 'x86-irq-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 PCI irq routing updates from Thomas Gleixner:
- Cleanup and robustify the PCI interrupt routing table handling
including proper range checks
- Add support for Intel 82378ZB/82379AB, SiS85C497 PIRQ routers
- Fix the ALi M1487 router handling
- Handle the IRT routing table format in AMI BIOSes correctly
* tag 'x86-irq-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/PCI: Fix coding style in PIRQ table verification
x86/PCI: Fix ALi M1487 (IBC) PIRQ router link value interpretation
x86/PCI: Add $IRT PIRQ routing table support
x86/PCI: Handle PIRQ routing tables with no router device given
x86/PCI: Add PIRQ routing table range checks
x86/PCI: Add support for the SiS85C497 PIRQ router
x86/PCI: Disambiguate SiS85C503 PIRQ router code entities
x86/PCI: Handle IRQ swizzling with PIRQ routers
x86/PCI: Also match function number in $PIR table
x86/PCI: Include function number in $PIR table dump
x86/PCI: Show the physical address of the $PIR table
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-05-23
We've added 113 non-merge commits during the last 26 day(s) which contain
a total of 121 files changed, 7425 insertions(+), 1586 deletions(-).
The main changes are:
1) Speed up symbol resolution for kprobes multi-link attachments, from Jiri Olsa.
2) Add BPF dynamic pointer infrastructure e.g. to allow for dynamically sized ringbuf
reservations without extra memory copies, from Joanne Koong.
3) Big batch of libbpf improvements towards libbpf 1.0 release, from Andrii Nakryiko.
4) Add BPF link iterator to traverse links via seq_file ops, from Dmitrii Dolgov.
5) Add source IP address to BPF tunnel key infrastructure, from Kaixi Fan.
6) Refine unprivileged BPF to disable only object-creating commands, from Alan Maguire.
7) Fix JIT blinding of ld_imm64 when they point to subprogs, from Alexei Starovoitov.
8) Add BPF access to mptcp_sock structures and their meta data, from Geliang Tang.
9) Add new BPF helper for access to remote CPU's BPF map elements, from Feng Zhou.
10) Allow attaching 64-bit cookie to BPF link of fentry/fexit/fmod_ret, from Kui-Feng Lee.
11) Follow-ups to typed pointer support in BPF maps, from Kumar Kartikeya Dwivedi.
12) Add busy-poll test cases to the XSK selftest suite, from Magnus Karlsson.
13) Improvements in BPF selftest test_progs subtest output, from Mykola Lysenko.
14) Fill bpf_prog_pack allocator areas with illegal instructions, from Song Liu.
15) Add generic batch operations for BPF map-in-map cases, from Takshak Chahande.
16) Make bpf_jit_enable more user friendly when permanently on 1, from Tiezhu Yang.
17) Fix an array overflow in bpf_trampoline_get_progs(), from Yuntao Wang.
====================
Link: https://lore.kernel.org/r/20220523223805.27931-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a memset like API for text_poke. This will be used to fill the
unused RX memory with illegal instructions.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20220520235758.1858153-3-song@kernel.org
- Allow runtime services to be re-enabled at boot on RT kernels.
- Provide access to secrets injected into the boot image by CoCo
hypervisors (COnfidential COmputing)
- Use DXE services on x86 to make the boot image executable after
relocation, if needed.
- Prefer mirrored memory for randomized allocations.
- Only randomize the placement of the kernel image on arm64 if the
loader has not already done so.
- Add support for obtaining the boot hartid from EFI on RISC-V.
-----BEGIN PGP SIGNATURE-----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=xqxQ
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Allow runtime services to be re-enabled at boot on RT kernels.
- Provide access to secrets injected into the boot image by CoCo
hypervisors (COnfidential COmputing)
- Use DXE services on x86 to make the boot image executable after
relocation, if needed.
- Prefer mirrored memory for randomized allocations.
- Only randomize the placement of the kernel image on arm64 if the
loader has not already done so.
- Add support for obtaining the boot hartid from EFI on RISC-V.
* tag 'efi-next-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
riscv/efi_stub: Add support for RISCV_EFI_BOOT_PROTOCOL
efi: stub: prefer mirrored memory for randomized allocations
efi/arm64: libstub: run image in place if randomized by the loader
efi: libstub: pass image handle to handle_kernel_image()
efi: x86: Set the NX-compatibility flag in the PE header
efi: libstub: ensure allocated memory to be executable
efi: libstub: declare DXE services table
efi: Add missing prototype for efi_capsule_setup_info
docs: security: Add secrets/coco documentation
efi: Register efi_secret platform device if EFI secret area is declared
virt: Add efi_secret module to expose confidential computing secrets
efi: Save location of EFI confidential computing area
efi: Allow to enable EFI runtime services by default on RT
Merge power management tools updates for 5.19-rc1:
- Update turbostat to version 2022.04.16 including the following
changes:
* No build warnings with -Wextra (Len Brown).
* Tweak --show and --hide capability (Len Brown).
* Be more useful as non-root (Len Brown).
* Fix ICX DRAM power numbers (Len Brown).
* Fix dump for AMD cpus (Dan Merillat).
* Add Power Limit4 support (Sumeet Pawnikar).
* Print power values upto three decimal (Sumeet Pawnikar).
* Allow -e for all names (Zephaniah E. Loss-Cutler-Hull).
* Allow printing header every N iterations (Zephaniah E.
Loss-Cutler-Hull).
* Support thermal throttle count print (Chen Yu).
* pm-tools:
tools/power turbostat: version 2022.04.16
tools/power turbostat: No build warnings with -Wextra
tools/power turbostat: be more useful as non-root
tools/power turbostat: fix ICX DRAM power numbers
tools/power turbostat: Support thermal throttle count print
tools/power turbostat: Allow printing header every N iterations
tools/power turbostat: Allow -e for all names.
tools/power turbostat: print power values upto three decimal
tools/power turbostat: Add Power Limit4 support
tools/power turbostat: fix dump for AMD cpus
tools/power turbostat: tweak --show and --hide capability
The enumeration of MD_CLEAR in CPUID(EAX=7,ECX=0).EDX{bit 10} is not an
accurate indicator on all CPUs of whether the VERW instruction will
overwrite fill buffers. FB_CLEAR enumeration in
IA32_ARCH_CAPABILITIES{bit 17} covers the case of CPUs that are not
vulnerable to MDS/TAA, indicating that microcode does overwrite fill
buffers.
Guests running in VMM environments may not be aware of all the
capabilities/vulnerabilities of the host CPU. Specifically, a guest may
apply MDS/TAA mitigations when a virtual CPU is enumerated as vulnerable
to MDS/TAA even when the physical CPU is not. On CPUs that enumerate
FB_CLEAR_CTRL the VMM may set FB_CLEAR_DIS to skip overwriting of fill
buffers by the VERW instruction. This is done by setting FB_CLEAR_DIS
during VMENTER and resetting on VMEXIT. For guests that enumerate
FB_CLEAR (explicitly asking for fill buffer clear capability) the VMM
will not use FB_CLEAR_DIS.
Irrespective of guest state, host overwrites CPU buffers before VMENTER
to protect itself from an MMIO capable guest, as part of mitigation for
MMIO Stale Data vulnerabilities.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Processor MMIO Stale Data is a class of vulnerabilities that may
expose data after an MMIO operation. For details please refer to
Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst.
These vulnerabilities are broadly categorized as:
Device Register Partial Write (DRPW):
Some endpoint MMIO registers incorrectly handle writes that are
smaller than the register size. Instead of aborting the write or only
copying the correct subset of bytes (for example, 2 bytes for a 2-byte
write), more bytes than specified by the write transaction may be
written to the register. On some processors, this may expose stale
data from the fill buffers of the core that created the write
transaction.
Shared Buffers Data Sampling (SBDS):
After propagators may have moved data around the uncore and copied
stale data into client core fill buffers, processors affected by MFBDS
can leak data from the fill buffer.
Shared Buffers Data Read (SBDR):
It is similar to Shared Buffer Data Sampling (SBDS) except that the
data is directly read into the architectural software-visible state.
An attacker can use these vulnerabilities to extract data from CPU fill
buffers using MDS and TAA methods. Mitigate it by clearing the CPU fill
buffers using the VERW instruction before returning to a user or a
guest.
On CPUs not affected by MDS and TAA, user application cannot sample data
from CPU fill buffers using MDS or TAA. A guest with MMIO access can
still use DRPW or SBDR to extract data architecturally. Mitigate it with
VERW instruction to clear fill buffers before VMENTER for MMIO capable
guests.
Add a kernel parameter mmio_stale_data={off|full|full,nosmt} to control
the mitigation.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Processor MMIO Stale Data is a class of vulnerabilities that may
expose data after an MMIO operation. For more details please refer to
Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
Add the Processor MMIO Stale Data bug enumeration. A microcode update
adds new bits to the MSR IA32_ARCH_CAPABILITIES, define them.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Remove empty files which were supposed to get removed with the
respective commits removing the functionality in them:
$ find arch/x86/ -empty
arch/x86/lib/mmx_32.c
arch/x86/include/asm/fpu/internal.h
arch/x86/include/asm/mmx.h
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220520101723.12006-1-bp@alien8.de
With CONFIG_GENERIC_BUG_RELATIVE_POINTERS, the addr/file relative
pointers are calculated weirdly: based on the beginning of the bug_entry
struct address, rather than their respective pointer addresses.
Make the relative pointers less surprising to both humans and tools by
calculating them the normal way.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Link: https://lkml.kernel.org/r/f0e05be797a16f4fc2401eeb88c8450dcbe61df6.1652362951.git.jpoimboe@kernel.org
Some firmware supplies PCI host bridge _CRS that includes address space
unusable by PCI devices, e.g., space occupied by host bridge registers or
used by hidden PCI devices.
To avoid this unusable space, Linux currently excludes E820 reserved
regions from _CRS windows; see 4dc2287c18 ("x86: avoid E820 regions when
allocating address space").
However, this use of E820 reserved regions to clip things out of _CRS is
not supported by ACPI, UEFI, or PCI Firmware specs, and some systems have
E820 reserved regions that cover the entire memory window from _CRS.
4dc2287c18 clips the entire window, leaving no space for hot-added or
uninitialized PCI devices.
For example, from a Lenovo IdeaPad 3 15IIL 81WE:
BIOS-e820: [mem 0x4bc50000-0xcfffffff] reserved
pci_bus 0000:00: root bus resource [mem 0x65400000-0xbfffffff window]
pci 0000:00:15.0: BAR 0: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:15.0: BAR 0: no space for [mem size 0x00001000 64bit]
Future patches will add quirks to enable/disable E820 clipping
automatically.
Add a "pci=no_e820" kernel command line option to disable clipping with
E820 reserved regions. Also add a matching "pci=use_e820" option to enable
clipping with E820 reserved regions if that has been disabled by default by
further patches in this patch-set.
Both options taint the kernel because they are intended for debugging and
workaround purposes until a quirk can set them automatically.
[bhelgaas: commit log, add printk]
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1868899 Lenovo IdeaPad 3
Link: https://lore.kernel.org/r/20220519152150.6135-2-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Benoit Grégoire <benoitg@coeus.ca>
Cc: Hui Wang <hui.wang@canonical.com>
When returning to user space, %rsp is user-controlled value.
If it is a SNP-guest and the hypervisor decides to mess with the
code-page for this path while a CPU is executing it, a potential #VC
could hit in the syscall return path and mislead the #VC handler.
So make ip_within_syscall_gap() return true in this case.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220412124909.10467-1-jiangshanlai@gmail.com
register_nmi_handler() has no sanity check whether a handler has been
registered already. Such an unintended double-add leads to list corruption
and hard to diagnose problems during the next NMI handling.
Init the list head in the static NMI action struct and check it for being
empty in register_nmi_handler().
[ bp: Fixups. ]
Reported-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/lkml/20220511234332.3654455-1-seanjc@google.com
Relocate the twin mce functions to arch/x86/mm/pat/set_memory.c
file where they belong.
While at it, fixup a function name in a comment.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
[sfr: gate {set,clear}_mce_nospec() by CONFIG_X86_64]
Link: https://lore.kernel.org/r/165272527328.90175.8336008202048685278.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In the event that random_get_entropy() can't access a cycle counter or
similar, falling back to returning 0 is suboptimal. Instead, fallback
to calling random_get_entropy_fallback(), which isn't extremely high
precision or guaranteed to be entropic, but is certainly better than
returning zero all the time.
If CONFIG_X86_TSC=n, then it's possible for the kernel to run on systems
without RDTSC, such as 486 and certain 586, so the fallback code is only
required for that case.
As well, fix up both the new function and the get_cycles() function from
which it was derived to use cpu_feature_enabled() rather than
boot_cpu_has(), and use !IS_ENABLED() instead of #ifndef.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Move ptep_clear() to the include/linux/pgtable.h and add page table check
relate hooks to some helpers, it's prepare for support page table check
feature on new architecture.
Optimize the implementation of ptep_clear(), page table hooks added page
table check stubs, the interface control should be at stubs, there is no
rationale for doing a IS_ENABLED() check here.
For architectures that do not enable CONFIG_PAGE_TABLE_CHECK, they will
call a fallback page table check stubs[1] when getting their page table
helpers[2] in include/linux/pgtable.h.
[1] page table check stubs defined in include/linux/page_table_check.h
[2] ptep_clear() ptep_get_and_clear() pmdp_huge_get_and_clear()
pudp_huge_get_and_clear()
Link: https://lkml.kernel.org/r/20220507110114.4128854-4-tongtiangen@huawei.com
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Acked-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The pxx_user_accessible_page() checks the PTE bit, it's
architecture-specific code, move them into x86's pgtable.h.
These helpers are being moved out to make the page table check framework
platform independent.
Link: https://lkml.kernel.org/r/20220507110114.4128854-3-tongtiangen@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Acked-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Calls to change_protection_range() on THP can trigger, at least on x86,
two TLB flushes for one page: one immediately, when pmdp_invalidate() is
called by change_huge_pmd(), and then another one later (that can be
batched) when change_protection_range() finishes.
The first TLB flush is only necessary to prevent the dirty bit (and with a
lesser importance the access bit) from changing while the PTE is modified.
However, this is not necessary as the x86 CPUs set the dirty-bit
atomically with an additional check that the PTE is (still) present. One
caveat is Intel's Knights Landing that has a bug and does not do so.
Leverage this behavior to eliminate the unnecessary TLB flush in
change_huge_pmd(). Introduce a new arch specific pmdp_invalidate_ad()
that only invalidates the access and dirty bit from further changes.
Link: https://lkml.kernel.org/r/20220401180821.1986781-4-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, using mprotect() to unprotect a memory region or uffd to
unprotect a memory region causes a TLB flush. However, in such cases the
PTE is often not modified (i.e., remain RO) and therefore not TLB flush is
needed.
Add an arch-specific pte_needs_flush() which tells whether a TLB flush is
needed based on the old PTE and the new one. Implement an x86
pte_needs_flush().
Always flush the TLB when it is architecturally needed even when skipping
a TLB flush might only result in a spurious page-faults by skipping the
flush.
Even with such conservative manner, we can in the future further refine
the checks to test whether a PTE is present by only considering the
architectural _PAGE_PRESENT flag instead of {pte|pmd}_preesnt(). For not
be careful and use the latter.
Link: https://lkml.kernel.org/r/20220401180821.1986781-3-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The functions invoked via do_arch_prctl_common() can only operate on
the current task and none of these function uses the task argument.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/87lev7vtxj.ffs@tglx
Expand and clean up the page fault stats. The current stats are at best
incomplete, and at worst misleading. Differentiate between faults that
are actually fixed vs those that result in an MMIO SPTE being created,
track faults that are spurious, faults that trigger emulation, faults
that that are fixed in the fast path, and last but not least, track the
number of faults that are taken.
Note, the number of faults that require emulation for write-protected
shadow pages can roughly be calculated by subtracting the number of MMIO
SPTEs created from the overall number of faults that trigger emulation.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220423034752.1161007-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The INTEGRITY_CAPABILITIES MSR is enumerated by bit 2 of the
CORE_CAPABILITIES MSR.
Add defines for the CORE_CAPS enumeration as well as for the integrity
MSR.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220506225410.1652287-3-tony.luck@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
IFS is a CPU feature that allows a binary blob, similar to microcode,
to be loaded and consumed to perform low level validation of CPU
circuitry. In fact, it carries the same Processor Signature
(family/model/stepping) details that are contained in Intel microcode
blobs.
In support of an IFS driver to trigger loading, validation, and running
of these tests blobs, make the functionality of cpu_signatures_match()
and collect_cpu_info_early() available outside of the microcode driver.
Add an "intel_" prefix and drop the "_early" suffix from
collect_cpu_info_early() and EXPORT_SYMBOL_GPL() it. Add
declaration to x86 <asm/cpu.h>
Make cpu_signatures_match() an inline function in x86 <asm/cpu.h>,
and also give it an "intel_" prefix.
No functional change intended.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220506225410.1652287-2-tony.luck@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
swiotlb-xen uses very different ways to allocate coherent memory on x86
vs arm. On the former it allocates memory from the page allocator, while
on the later it reuses the dma-direct allocator the handles the
complexities of non-coherent DMA on arm platforms.
Unfortunately the complexities of trying to deal with the two cases in
the swiotlb-xen.c code lead to a bug in the handling of
DMA_ATTR_NO_KERNEL_MAPPING on arm. With the DMA_ATTR_NO_KERNEL_MAPPING
flag the coherent memory allocator does not actually allocate coherent
memory, but just a DMA handle for some memory that is DMA addressable
by the device, but which does not have to have a kernel mapping. Thus
dereferencing the return value will lead to kernel crashed and memory
corruption.
Fix this by using the dma-direct allocator directly for arm, which works
perfectly fine because on arm swiotlb-xen is only used when the domain is
1:1 mapped, and then simplifying the remaining code to only cater for the
x86 case with DMA coherent device.
Reported-by: Rahul Singh <Rahul.Singh@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rahul Singh <rahul.singh@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Rahul Singh <rahul.singh@arm.com>
IBS L3 miss filtering works by tagging an instruction on IBS counter
overflow and generating an NMI if the tagged instruction causes an L3
miss. Samples without an L3 miss are discarded and counter is reset
with random value (between 1-15 for fetch pmu and 1-127 for op pmu).
This helps in reducing sampling overhead when user is interested only
in such samples. One of the use case of such filtered samples is to
feed data to page-migration daemon in tiered memory systems.
Add support for L3 miss filtering in IBS driver via new pmu attribute
"l3missonly". Example usage:
# perf record -a -e ibs_op/l3missonly=1/ --raw-samples sleep 5
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220509044914.1473-4-ravi.bangoria@amd.com
arch_check_user_regs() is used at the moment to verify that struct pt_regs
contains valid values when entering the kernel from userspace. s390 needs
a place in the generic entry code to modify a cpu data structure when
switching from userspace to kernel mode. As arch_check_user_regs() is
exactly this, rename it to arch_enter_from_user_mode().
When entering the kernel from userspace, arch_check_user_regs() is
used to verify that struct pt_regs contains valid values. Note that
the NMI codepath doesn't call this function. s390 needs a place in the
generic entry code to modify a cpu data structure when switching from
userspace to kernel mode. As arch_check_user_regs() is exactly this,
rename it to arch_enter_from_user_mode().
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20220504062351.2954280-2-tmricht@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add fn and fn_arg members into struct kernel_clone_args and test for
them in copy_thread (instead of testing for PF_KTHREAD | PF_IO_WORKER).
This allows any task that wants to be a user space task that only runs
in kernel mode to use this functionality.
The code on x86 is an exception and still retains a PF_KTHREAD test
because x86 unlikely everything else handles kthreads slightly
differently than user space tasks that start with a function.
The functions that created tasks that start with a function
have been updated to set ".fn" and ".fn_arg" instead of
".stack" and ".stack_size". These functions are fork_idle(),
create_io_thread(), kernel_thread(), and user_mode_thread().
Link: https://lkml.kernel.org/r/20220506141512.516114-4-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
RESERVE_BRK() reserves data in the .brk_reservation section. The data
is initialized to zero, like BSS, so the macro specifies 'nobits' to
prevent the data from taking up space in the vmlinux binary. The only
way to get the compiler to do that (without putting the variable in .bss
proper) is to use inline asm.
The macro also has a hack which encloses the inline asm in a discarded
function, which allows the size to be passed (global inline asm doesn't
allow inputs).
Remove the need for the discarded function hack by just stringifying the
size rather than supplying it as an input to the inline asm.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220506121631.133110232@infradead.org
If AMD Performance Monitoring Version 2 (PerfMonV2) is
supported, use CPUID leaf 0x80000022 EBX to detect the
number of Core PMCs. This offers more flexibility if the
counts change in later processor families.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/68a6d9688df189267db26530378870edd34f7b06.1650515382.git.sandipan.das@amd.com
Add MSR definitions that will be used to enable the new AMD
Performance Monitoring Version 2 (PerfMonV2) features. These
include:
* Performance Counter Global Control (PerfCntrGlobalCtl)
* Performance Counter Global Status (PerfCntrGlobalStatus)
* Performance Counter Global Status Clear (PerfCntrGlobalStatusClr)
The new Performance Counter Global Control and Status MSRs
provide an interface for enabling or disabling multiple
counters at the same time and for testing overflow without
probing the individual registers for each PMC.
The availability of these registers is indicated through the
PerfMonV2 feature bit of CPUID leaf 0x80000022 EAX.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/cdc0d8f75bd519848731b5c64d924f5a0619a573.1650515382.git.sandipan.das@amd.com
CPUID leaf 0x80000022 i.e. ExtPerfMonAndDbg advertises some
new performance monitoring features for AMD processors.
Bit 0 of EAX indicates support for Performance Monitoring
Version 2 (PerfMonV2) features. If found to be set during
PMU initialization, the EBX bits of the same CPUID function
can be used to determine the number of available PMCs for
different PMU types. Additionally, Core PMCs can be managed
using new global control and status registers.
For better utilization of feature words, PerfMonV2 is added
as a scattered feature bit.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/c70e497e22f18e7f05b025bb64ca21cc12b17792.1650515382.git.sandipan.das@amd.com
UEFI DXE services are not yet used in kernel code
but are required to manipulate page table memory
protection flags.
Add required declarations to use DXE services functions.
Signed-off-by: Baskov Evgeniy <baskov@ispras.ru>
Link: https://lore.kernel.org/r/20220303142120.1975-2-baskov@ispras.ru
[ardb: ignore absent DXE table but warn if the signature check fails]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
XENPV doesn't use swapgs_restore_regs_and_return_to_usermode(),
error_entry() and the code between entry_SYSENTER_compat() and
entry_SYSENTER_compat_after_hwframe.
Change the PV-compatible SWAPGS to the ASM instruction swapgs in these
places.
Also remove the definition of SWAPGS since no more users.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220503032107.680190-7-jiangshanlai@gmail.com
Always stash the address error_entry() is going to return to, in %r12
and get rid of the void *error_entry_ret; slot in struct bad_iret_stack
which was supposed to account for it and pt_regs pushed on the stack.
After this, both fixup_bad_iret() and sync_regs() can work on a struct
pt_regs pointer directly.
[ bp: Rewrite commit message, touch ups. ]
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220503032107.680190-2-jiangshanlai@gmail.com
The utilization of arch_scale_freq_tick() for CPU frequency readouts is
incomplete as it failed to move the function prototype and the define
out of the CONFIG_SMP && CONFIG_X86_64 #ifdef.
Make them unconditionally available.
Fixes: bb6e89df90 ("x86/aperfmperf: Make parts of the frequency invariance code unconditional")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/202205010106.06xRBR2C-lkp@intel.com
* Take care of faults occuring between the PARange and
IPA range by injecting an exception
* Fix S2 faults taken from a host EL0 in protected mode
* Work around Oops caused by a PMU access from a 32bit
guest when PMU has been created. This is a temporary
bodge until we fix it for good.
x86:
* Fix potential races when walking host page table
* Fix shadow page table leak when KVM runs nested
* Work around bug in userspace when KVM synthesizes leaf
0x80000021 on older (pre-EPYC) or Intel processors
Generic (but affects only RISC-V):
* Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJuxI4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNjfQf/X4Rn6+sTkXRS0UHWEu+q9FjJ+mIx
ZUWdbncf0brUB1RPAFfKaiQHo0t2Req+iTlpqZL0nVQ4myNUelHYube/sZdK/aBR
WOjKZE0hugGyMH3js2bsTdgzbcphThyYAX97qGZNb7tsPGhBiw7c98KhjxlieJab
D8LMNtM3uzPDxg422GfOm8ge2VbpySS5oRoGHfbD+4FiLYlXoCYfZuzlFwFFIGxw
uHm5zzfX5jshayFpFYVSJHtARXlpwJWKz9yl63QjHrhVitW4m5j4re3aNfboL6Pd
F5Z9K+DKhJLAH5cqmgiPPe2CGMvmRwKrN3F9MqV91xDPBT8J4rrowEeboQ==
=SwSU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Take care of faults occuring between the PARange and IPA range by
injecting an exception
- Fix S2 faults taken from a host EL0 in protected mode
- Work around Oops caused by a PMU access from a 32bit guest when PMU
has been created. This is a temporary bodge until we fix it for
good.
x86:
- Fix potential races when walking host page table
- Fix shadow page table leak when KVM runs nested
- Work around bug in userspace when KVM synthesizes leaf 0x80000021
on older (pre-EPYC) or Intel processors
Generic (but affects only RISC-V):
- Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: work around QEMU issue with synthetic CPUID leaves
Revert "x86/mm: Introduce lookup_address_in_mm()"
KVM: x86/mmu: fix potential races when walking host page table
KVM: fix bad user ABI for KVM_EXIT_SYSTEM_EVENT
KVM: x86/mmu: Do not create SPTEs for GFNs that exceed host.MAXPHYADDR
KVM: arm64: Inject exception on out-of-IPA-range translation fault
KVM/arm64: Don't emulate a PMU for 32-bit guests if feature not set
KVM: arm64: Handle host stage-2 faults from 32-bit EL0
solely controlled by the hypervisor
- A build fix to make the function prototype (__warn()) as visible as
the definition itself
- A bunch of objtool annotation fixes which have accumulated over time
- An ORC unwinder fix to handle bad input gracefully
- Well, we thought the microcode gets loaded in time in order to restore
the microcode-emulated MSRs but we thought wrong. So there's a fix for
that to have the ordering done properly
- Add new Intel model numbers
- A spelling fix
-----BEGIN PGP SIGNATURE-----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=poyP
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- A fix to disable PCI/MSI[-X] masking for XEN_HVM guests as that is
solely controlled by the hypervisor
- A build fix to make the function prototype (__warn()) as visible as
the definition itself
- A bunch of objtool annotation fixes which have accumulated over time
- An ORC unwinder fix to handle bad input gracefully
- Well, we thought the microcode gets loaded in time in order to
restore the microcode-emulated MSRs but we thought wrong. So there's
a fix for that to have the ordering done properly
- Add new Intel model numbers
- A spelling fix
* tag 'x86_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests
bug: Have __warn() prototype defined unconditionally
x86/Kconfig: fix the spelling of 'becoming' in X86_KERNEL_IBT config
objtool: Use offstr() to print address of missing ENDBR
objtool: Print data address for "!ENDBR" data warnings
x86/xen: Add ANNOTATE_NOENDBR to startup_xen()
x86/uaccess: Add ENDBR to __put_user_nocheck*()
x86/retpoline: Add ANNOTATE_NOENDBR for retpolines
x86/static_call: Add ANNOTATE_NOENDBR to static call trampoline
objtool: Enable unreachable warnings for CLANG LTO
x86,objtool: Explicitly mark idtentry_body()s tail REACHABLE
x86,objtool: Mark cpu_startup_entry() __noreturn
x86,xen,objtool: Add UNWIND hint
lib/strn*,objtool: Enforce user_access_begin() rules
MAINTAINERS: Add x86 unwinding entry
x86/unwind/orc: Recheck address range after stack info was updated
x86/cpu: Load microcode during restore_processor_state()
x86/cpu: Add new Alderlake and Raptorlake CPU model numbers
When shadowing 5-level NPT for 4-level NPT L1 guest, the root_sp is
allocated with role.level = 5 and the guest pagetable's root gfn.
And root_sp->spt[0] is also allocated with the same gfn and the same
role except role.level = 4. Luckily that they are different shadow
pages, but only root_sp->spt[0] is the real translation of the guest
pagetable.
Here comes a problem:
If the guest switches from gCR4_LA57=0 to gCR4_LA57=1 (or vice verse)
and uses the same gfn as the root page for nested NPT before and after
switching gCR4_LA57. The host (hCR4_LA57=1) might use the same root_sp
for the guest even the guest switches gCR4_LA57. The guest will see
unexpected page mapped and L2 may exploit the bug and hurt L1. It is
lucky that the problem can't hurt L0.
And three special cases need to be handled:
The root_sp should be like role.direct=1 sometimes: its contents are
not backed by gptes, root_sp->gfns is meaningless. (For a normal high
level sp in shadow paging, sp->gfns is often unused and kept zero, but
it could be relevant and meaningful if sp->gfns is used because they
are backed by concrete gptes.)
For such root_sp in the case, root_sp is just a portal to contribute
root_sp->spt[0], and root_sp->gfns should not be used and
root_sp->spt[0] should not be dropped if gpte[0] of the guest root
pagetable is changed.
Such root_sp should not be accounted too.
So add role.passthrough to distinguish the shadow pages in the hash
when gCR4_LA57 is toggled and fix above special cases by using it in
kvm_mmu_page_{get|set}_gfn() and sp_has_gptes().
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20220420131204.2850-3-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
direct_map is always equal to the direct field of the root page's role:
- for shadow paging, direct_map is true if CR0.PG=0 and root_role.direct is
copied from cpu_role.base.direct
- for TDP, it is always true and root_role.direct is also always true
- for shadow TDP, it is always false and root_role.direct is also always
false
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove another duplicate field of struct kvm_mmu. This time it's
the root level for page table walking; the separate field is
always initialized as cpu_role.base.level, so its users can look
up the CPU mode directly instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
root_role.level is always the same value as shadow_level:
- it's kvm_mmu_get_tdp_level(vcpu) when going through init_kvm_tdp_mmu
- it's the level argument when going through kvm_init_shadow_ept_mmu
- it's assigned directly from new_role.base.level when going
through shadow_mmu_init_context
Remove the duplication and get the level directly from the role.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before the separation of the CPU and the MMU role, CR0.PG was not
available in the base MMU role, because two-dimensional paging always
used direct=1 in the MMU role. However, now that the raw role is
snapshotted in mmu->cpu_role, the value of CR0.PG always matches both
!cpu_role.base.direct and cpu_role.base.level > 0. There is no need to
store it again in union kvm_mmu_extended_role; instead, write an is_cr0_pg
accessor by hand that takes care of the conversion. Use cpu_role.base.level
since the future of the direct field is unclear.
Likewise, CR4.PAE is now always present in the CPU role as
!cpu_role.base.has_4_byte_gpte. The inversion makes certain tests on
the MMU role easier, and is easily hidden by the is_cr4_pae accessor
when operating on the CPU role.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is quite confusing that the "full" union is called kvm_mmu_role
but is used for the "cpu_role" field of struct kvm_mmu. Rename it
to kvm_cpu_role.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
mmu_role represents the role of the root of the page tables.
It does not need any extended bits, as those govern only KVM's
page table walking; the is_* functions used for page table
walking always use the CPU role.
ext.valid is not present anymore in the MMU role, but an
all-zero MMU role is impossible because the level field is
never zero in the MMU role. So just zap the whole mmu_role
in order to force invalidation after CPUID is updated.
While making this change, which requires touching almost every
occurrence of "mmu_role", rename it to "root_role".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The ept_ad field is used during page walk to determine if the guest PTEs
have accessed and dirty bits. In the MMU role, the ad_disabled
bit represents whether the *shadow* PTEs have the bits, so it
would be incorrect to replace PT_HAVE_ACCESSED_DIRTY with just
!mmu->mmu_role.base.ad_disabled.
However, the similar field in the CPU mode, ad_disabled, is initialized
correctly: to the opposite value of ept_ad for shadow EPT, and zero
for non-EPT guest paging modes (which always have A/D bits). It is
therefore possible to compute PT_HAVE_ACCESSED_DIRTY from the CPU mode,
like other page-format fields; it just has to be inverted to account
for the different polarity.
In fact, now that the CPU mode is distinct from the MMU roles, it would
even be possible to remove PT_HAVE_ACCESSED_DIRTY macro altogether, and
use !mmu->cpu_role.base.ad_disabled instead. I am not doing this because
the macro has a small effect in terms of dead code elimination:
text data bss dec hex
103544 16665 112 120321 1d601 # as of this patch
103746 16665 112 120523 1d6cb # without PT_HAVE_ACCESSED_DIRTY
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Snapshot the state of the processor registers that govern page walk into
a new field of struct kvm_mmu. This is a more natural representation
than having it *mostly* in mmu_role but not exclusively; the delta
right now is represented in other fields, such as root_level.
The nested MMU now has only the CPU role; and in fact the new function
kvm_calc_cpu_role is analogous to the previous kvm_calc_nested_mmu_role,
except that it has role.base.direct equal to !CR0.PG. For a walk-only
MMU, "direct" has no meaning, but we set it to !CR0.PG so that
role.ext.cr0_pg can go away in a future patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the per-vendor hack-a-fix for KVM's #PF => #PF => #DF workaround
with an explicit, common workaround in kvm_inject_emulated_page_fault().
Aside from being a hack, the current approach is brittle and incomplete,
e.g. nSVM's KVM_SET_NESTED_STATE fails to set ->inject_page_fault(),
and nVMX fails to apply the workaround when VMX is intercepting #PF due
to allow_smaller_maxphyaddr=1.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The TSC_AUX virtualization feature allows AMD SEV-ES guests to securely use
TSC_AUX (auxiliary time stamp counter data) in the RDTSCP and RDPID
instructions. The TSC_AUX value is set using the WRMSR instruction to the
TSC_AUX MSR (0xC0000103). It is read by the RDMSR, RDTSCP and RDPID
instructions. If the read/write of the TSC_AUX MSR is intercepted, then
RDTSCP and RDPID must also be intercepted when TSC_AUX virtualization
is present. However, the RDPID instruction can't be intercepted. This means
that when TSC_AUX virtualization is present, RDTSCP and TSC_AUX MSR
read/write must not be intercepted for SEV-ES (or SEV-SNP) guests.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <165040164424.1399644.13833277687385156344.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The TSC_AUX Virtualization feature allows AMD SEV-ES guests to securely use
TSC_AUX (auxiliary time stamp counter data) MSR in RDTSCP and RDPID
instructions.
The TSC_AUX MSR is typically initialized to APIC ID or another unique
identifier so that software can quickly associate returned TSC value
with the logical processor.
Add the feature bit and also include it in the kvm for detection.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Acked-by: Borislav Petkov <bp@suse.de>
Message-Id: <165040157111.1399644.6123821125319995316.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop lookup_address_in_mm() now that KVM is providing it's own variant
of lookup_address_in_pgd() that is safe for use with user addresses, e.g.
guards against page tables being torn down. A variant that provides a
non-init mm is inherently dangerous and flawed, as the only reason to use
an mm other than init_mm is to walk a userspace mapping, and
lookup_address_in_pgd() does not play nice with userspace mappings, e.g.
doesn't disable IRQs to block TLB shootdowns and doesn't use READ_ONCE()
to ensure an upper level entry isn't converted to a huge page between
checking the PAGE_SIZE bit and grabbing the address of the next level
down.
This reverts commit 13c72c060f.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <YmwIi3bXr/1yhYV/@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This defines and exports a platform specific custom vm_get_page_prot() via
subscribing ARCH_HAS_VM_GET_PAGE_PROT. This also unsubscribes from config
ARCH_HAS_FILTER_PGPROT, after dropping off arch_filter_pgprot() and
arch_vm_get_page_prot().
Link: https://lkml.kernel.org/r/20220414062125.609297-6-anshuman.khandual@arm.com
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
HSMP protocol version 5 is supported on AMD family 19h model 10h
EPYC processors. This version brings new features such as
-- DIMM statistics
-- Bandwidth for IO and xGMI links
-- Monitor socket and core frequency limits
-- Configure power efficiency modes, DF pstate range etc
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Link: https://lore.kernel.org/r/20220427152248.25643-1-nchatrad@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The frequency invariance support is currently limited to x86/64 and SMP,
which is the vast majority of machines.
arch_scale_freq_tick() is called every tick on all CPUs and reads the APERF
and MPERF MSRs. The CPU frequency getters function do the same via dedicated
IPIs.
While it could be argued that on systems where frequency invariance support
is disabled (32bit, !SMP) the per tick read of the APERF and MPERF MSRs can
be avoided, it does not make sense to keep the extra code and the resulting
runtime issues of mass IPIs around.
As a first step split out the non frequency invariance specific
initialization code and the read MSR portion of arch_scale_freq_tick(). The
rest of the code is still conditional and guarded with a static key.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.761988704@linutronix.de
AMD boot CPU initialization happens late via ACPI/CPPC which prevents the
Intel parts from being marked __init.
Split out the common code and provide a dedicated interface for the AMD
initialization and mark the Intel specific code and data __init.
The remaining text size is almost cut in half:
text: 2614 -> 1350
init.text: 0 -> 786
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.592465719@linutronix.de
This code is convoluted and because it can be invoked post init via the
ACPI/CPPC code, all of the initialization functionality is built in instead
of being part of init text and init data.
As a first step create separate calls for the boot and the application
processors.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.536733494@linutronix.de
Changes to the "warn" mode of split lock handling mean that TIF_SLD is
never set.
Remove the bit, and the functions that use it.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220310204854.31752-3-tony.luck@intel.com
Since
e2a1256b17 ("x86/speculation: Restore speculation related MSRs during S3 resume")
kmemleak reports this issue:
unreferenced object 0xffff888009cedc00 (size 256):
comm "swapper/0", pid 1, jiffies 4294693823 (age 73.764s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 48 00 00 00 00 00 00 00 ........H.......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
msr_build_context (include/linux/slab.h:621)
pm_check_save_msr (arch/x86/power/cpu.c:520)
do_one_initcall (init/main.c:1298)
kernel_init_freeable (init/main.c:1370)
kernel_init (init/main.c:1504)
ret_from_fork (arch/x86/entry/entry_64.S:304)
Reproducer:
- boot the VM with a debug kernel config (see
https://github.com/multipath-tcp/mptcp_net-next/issues/268)
- wait ~1 minute
- start a kmemleak scan
The root cause here is alignment within the packed struct saved_context
(from suspend_64.h). Kmemleak only searches for pointers that are
aligned (see how pointers are scanned in kmemleak.c), but pahole shows
that the saved_msrs struct member and all members after it in the
structure are unaligned:
struct saved_context {
struct pt_regs regs; /* 0 168 */
/* --- cacheline 2 boundary (128 bytes) was 40 bytes ago --- */
u16 ds; /* 168 2 */
...
u64 misc_enable; /* 232 8 */
bool misc_enable_saved; /* 240 1 */
/* Note below odd offset values for the remainder of this struct */
struct saved_msrs saved_msrs; /* 241 16 */
/* --- cacheline 4 boundary (256 bytes) was 1 bytes ago --- */
long unsigned int efer; /* 257 8 */
u16 gdt_pad; /* 265 2 */
struct desc_ptr gdt_desc; /* 267 10 */
u16 idt_pad; /* 277 2 */
struct desc_ptr idt; /* 279 10 */
u16 ldt; /* 289 2 */
u16 tss; /* 291 2 */
long unsigned int tr; /* 293 8 */
long unsigned int safety; /* 301 8 */
long unsigned int return_address; /* 309 8 */
/* size: 317, cachelines: 5, members: 25 */
/* last cacheline: 61 bytes */
} __attribute__((__packed__));
Move misc_enable_saved to the end of the struct declaration so that
saved_msrs fits in before the cacheline 4 boundary.
The comment above the saved_context declaration says to fix wakeup_64.S
file and __save/__restore_processor_state() if the struct is modified:
it looks like all the accesses in wakeup_64.S are done through offsets
which are computed at build-time. Update that comment accordingly.
At the end, the false positive kmemleak report is due to a limitation
from kmemleak but it is always good to avoid unaligned members for
optimisation purposes.
Please note that it looks like this issue is not new, e.g.
https://lore.kernel.org/all/9f1bb619-c4ee-21c4-a251-870bd4db04fa@lwfinger.net/https://lore.kernel.org/all/94e48fcd-1dbd-ebd2-4c91-f39941735909@molgen.mpg.de/
[ bp: Massage + cleanup commit message. ]
Fixes: 7a9c2dd08e ("x86/pm: Introduce quirk framework to save/restore extra MSR registers around suspend/resume")
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220426202138.498310-1-matthieu.baerts@tessares.net
The GHCB specification section 2.7 states that when SEV-SNP is enabled,
a guest should not rely on the hypervisor to provide the address of the
AP jump table. Instead, if a guest BIOS wants to provide an AP jump
table, it should record the address in the SNP secrets page so the guest
operating system can obtain it directly from there.
Fix this on the guest kernel side by having SNP guests use the AP jump
table address published in the secrets page rather than issuing a GHCB
request to get it.
[ mroth:
- Improve error handling when ioremap()/memremap() return NULL
- Don't mix function calls with declarations
- Add missing __init
- Tweak commit message ]
Fixes: 0afb6b660a ("x86/sev: Use SEV-SNP AP creation to start secondary CPUs")
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220422135624.114172-3-michael.roth@amd.com
Provide a single common definition for the compat_flock and
compat_flock64 structures using the same tricks as for the native
variants. Another extra define is added for the packing required on
x86.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Link: https://lore.kernel.org/r/20220405071314.3225832-4-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The F_GETLK64/F_SETLK64/F_SETLKW64 fcntl opcodes are only implemented
for the 32-bit syscall APIs, but are also needed for compat handling
on 64-bit kernels.
Consolidate them in unistd.h instead of definining the internal compat
definitions in compat.h, which is rather error prone (e.g. parisc
gets the values wrong currently).
Note that before this change they were never visible to userspace due
to the fact that CONFIG_64BIT is only set for kernel builds.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220405071314.3225832-3-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
XSAVEC is the user space counterpart of XSAVES which cannot save supervisor
state. In virtualization scenarios the hypervisor does not expose XSAVES
but XSAVEC to the guest, though the kernel does not make use of it.
That's unfortunate because XSAVEC uses the compacted format of saving the
XSTATE. This is more efficient in terms of storage space vs. XSAVE[OPT] as
it does not create holes for XSTATE components which are not supported or
enabled by the kernel but are available in hardware. There is room for
further optimizations when XSAVEC/S and XGETBV1 are supported.
In order to support XSAVEC:
- Define the XSAVEC ASM macro as it's not yet supported by the required
minimal toolchain.
- Create a software defined X86_FEATURE_XCOMPACTED to select the compacted
XSTATE buffer format for both XSAVEC and XSAVES.
- Make XSAVEC an option in the 'XSAVE' ASM alternatives
Requested-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220404104820.598704095@linutronix.de
Objtool secretly does a jump label hack to overcome the limitations of
the toolchain. Make the hack explicit (and optional for other arches)
by turning it into a cmdline option and kernel config option.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/3bdcbfdd27ecb01ddec13c04bdf756a583b13d24.1650300597.git.jpoimboe@redhat.com
Now that stack validation is an optional feature of objtool, add
CONFIG_OBJTOOL and replace most usages of CONFIG_STACK_VALIDATION with
it.
CONFIG_STACK_VALIDATION can now be considered to be frame-pointer
specific. CONFIG_UNWINDER_ORC is already inherently valid for live
patching, so no need to "validate" it.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/939bf3d85604b2a126412bf11af6e3bd3b872bcb.1650300597.git.jpoimboe@redhat.com
Flush the CPU caches when memory is reclaimed from an SEV guest (where
reclaim also includes it being unmapped from KVM's memslots). Due to lack
of coherency for SEV encrypted memory, failure to flush results in silent
data corruption if userspace is malicious/broken and doesn't ensure SEV
guest memory is properly pinned and unpinned.
Cache coherency is not enforced across the VM boundary in SEV (AMD APM
vol.2 Section 15.34.7). Confidential cachelines, generated by confidential
VM guests have to be explicitly flushed on the host side. If a memory page
containing dirty confidential cachelines was released by VM and reallocated
to another user, the cachelines may corrupt the new user at a later time.
KVM takes a shortcut by assuming all confidential memory remain pinned
until the end of VM lifetime. Therefore, KVM does not flush cache at
mmu_notifier invalidation events. Because of this incorrect assumption and
the lack of cache flushing, malicous userspace can crash the host kernel:
creating a malicious VM and continuously allocates/releases unpinned
confidential memory pages when the VM is running.
Add cache flush operations to mmu_notifier operations to ensure that any
physical memory leaving the guest VM get flushed. In particular, hook
mmu_notifier_invalidate_range_start and mmu_notifier_release events and
flush cache accordingly. The hook after releasing the mmu lock to avoid
contention with other vCPUs.
Cc: stable@vger.kernel.org
Suggested-by: Sean Christpherson <seanjc@google.com>
Reported-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220421031407.2516575-4-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
During patch review, it was decided the SNP guest driver name should not
be SEV-SNP specific, but should be generic for use with anything SEV.
However, this feedback was missed and the driver name, and many of the
driver functions and structures, are SEV-SNP name specific. Rename the
driver to "sev-guest" (to match the misc device that is created) and
update some of the function and structure names, too.
While in the file, adjust the one pr_err() message to be a dev_err()
message so that the message, if issued, uses the driver name.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/307710bb5515c9088a19fd0b930268c7300479b2.1650464054.git.thomas.lendacky@amd.com
When resuming from system sleep state, restore_processor_state()
restores the boot CPU MSRs. These MSRs could be emulated by microcode.
If microcode is not loaded yet, writing to emulated MSRs leads to
unchecked MSR access error:
...
PM: Calling lapic_suspend+0x0/0x210
unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0...0) at rIP: ... (native_write_msr)
Call Trace:
<TASK>
? restore_processor_state
x86_acpi_suspend_lowlevel
acpi_suspend_enter
suspend_devices_and_enter
pm_suspend.cold
state_store
kobj_attr_store
sysfs_kf_write
kernfs_fop_write_iter
new_sync_write
vfs_write
ksys_write
__x64_sys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
RIP: 0033:0x7fda13c260a7
To ensure microcode emulated MSRs are available for restoration, load
the microcode on the boot CPU before restoring these MSRs.
[ Pawan: write commit message and productize it. ]
Fixes: e2a1256b17 ("x86/speculation: Restore speculation related MSRs during S3 resume")
Reported-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Tested-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215841
Link: https://lore.kernel.org/r/4350dfbf785cd482d3fafa72b2b49c83102df3ce.1650386317.git.pawan.kumar.gupta@linux.intel.com
Pull turbostat changes for 5.19 from Len Brown:
"Chen Yu (1):
tools/power turbostat: Support thermal throttle count print
Dan Merillat (1):
tools/power turbostat: fix dump for AMD cpus
Len Brown (5):
tools/power turbostat: tweak --show and --hide capability
tools/power turbostat: fix ICX DRAM power numbers
tools/power turbostat: be more useful as non-root
tools/power turbostat: No build warnings with -Wextra
tools/power turbostat: version 2022.04.16
Sumeet Pawnikar (2):
tools/power turbostat: Add Power Limit4 support
tools/power turbostat: print power values upto three decimal
Zephaniah E. Loss-Cutler-Hull (2):
tools/power turbostat: Allow -e for all names.
tools/power turbostat: Allow printing header every N iterations"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2022.04.16
tools/power turbostat: No build warnings with -Wextra
tools/power turbostat: be more useful as non-root
tools/power turbostat: fix ICX DRAM power numbers
tools/power turbostat: Support thermal throttle count print
tools/power turbostat: Allow printing header every N iterations
tools/power turbostat: Allow -e for all names.
tools/power turbostat: print power values upto three decimal
tools/power turbostat: Add Power Limit4 support
tools/power turbostat: fix dump for AMD cpus
tools/power turbostat: tweak --show and --hide capability
Intel is subdividing the mobile segment with additional models
with the same codename. Using the Intel "N" and "P" suffices
for these will be less confusing than trying to map to some
different naming convention.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/YlS7n7Xtso9BXZA2@agluck-desk3.sc.intel.com
<asm/dma-mapping.h> gets pulled in by all drivers using the DMA API.
Remove x86 internal variables and unnecessary includes from it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reuse the generic swiotlb initialization for xen-swiotlb. For ARM/ARM64
this works trivially, while for x86 xen_swiotlb_fixup needs to be passed
as the remap argument to swiotlb_init_remap/swiotlb_init_late.
Note that the lower bound of the swiotlb size is changed to the smaller
IO_TLB_MIN_SLABS based value with this patch, but that is fine as the
2MB value used in Xen before was just an optimization and is not the
hard lower bound.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The IOMMU table tries to separate the different IOMMUs into different
backends, but actually requires various cross calls.
Rewrite the code to do the generic swiotlb/swiotlb-xen setup directly
in pci-dma.c and then just call into the IOMMU drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
- Use either MSR_TSX_FORCE_ABORT or MSR_IA32_TSX_CTRL to disable TSX to
cover all CPUs which allow to disable it.
- Disable TSX development mode at boot so that a microcode update which
provides TSX development mode does not suddenly make the system
vulnerable to TSX Asynchronous Abort.
-----BEGIN PGP SIGNATURE-----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=UQaW
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Two x86 fixes related to TSX:
- Use either MSR_TSX_FORCE_ABORT or MSR_IA32_TSX_CTRL to disable TSX
to cover all CPUs which allow to disable it.
- Disable TSX development mode at boot so that a microcode update
which provides TSX development mode does not suddenly make the
system vulnerable to TSX Asynchronous Abort"
* tag 'x86-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsx: Disable TSX development mode at boot
x86/tsx: Use MSR_TSX_CTRL to clear CPUID bits
Commit 3ee48b6af4 ("mm, x86: Saving vmcore with non-lazy freeing of
vmas") introduced set_iounmap_nonlazy(), which sets vmap_lazy_nr to
lazy_max_pages() + 1, ensuring that any future vunmaps() immediately
purge the vmap areas instead of doing it lazily.
Commit 690467c81b ("mm/vmalloc: Move draining areas out of caller
context") moved the purging from the vunmap() caller to a worker thread.
Unfortunately, set_iounmap_nonlazy() can cause the worker thread to spin
(possibly forever). For example, consider the following scenario:
1. Thread reads from /proc/vmcore. This eventually calls
__copy_oldmem_page() -> set_iounmap_nonlazy(), which sets
vmap_lazy_nr to lazy_max_pages() + 1.
2. Then it calls free_vmap_area_noflush() (via iounmap()), which adds 2
pages (one page plus the guard page) to the purge list and
vmap_lazy_nr. vmap_lazy_nr is now lazy_max_pages() + 3, so the
drain_vmap_work is scheduled.
3. Thread returns from the kernel and is scheduled out.
4. Worker thread is scheduled in and calls drain_vmap_area_work(). It
frees the 2 pages on the purge list. vmap_lazy_nr is now
lazy_max_pages() + 1.
5. This is still over the threshold, so it tries to purge areas again,
but doesn't find anything.
6. Repeat 5.
If the system is running with only one CPU (which is typicial for kdump)
and preemption is disabled, then this will never make forward progress:
there aren't any more pages to purge, so it hangs. If there is more
than one CPU or preemption is enabled, then the worker thread will spin
forever in the background. (Note that if there were already pages to be
purged at the time that set_iounmap_nonlazy() was called, this bug is
avoided.)
This can be reproduced with anything that reads from /proc/vmcore
multiple times. E.g., vmcore-dmesg /proc/vmcore.
It turns out that improvements to vmap() over the years have obsoleted
the need for this "optimization". I benchmarked `dd if=/proc/vmcore
of=/dev/null` with 4k and 1M read sizes on a system with a 32GB vmcore.
The test was run on 5.17, 5.18-rc1 with a fix that avoided the hang, and
5.18-rc1 with set_iounmap_nonlazy() removed entirely:
|5.17 |5.18+fix|5.18+removal
4k|40.86s| 40.09s| 26.73s
1M|24.47s| 23.98s| 21.84s
The removal was the fastest (by a wide margin with 4k reads). This
patch removes set_iounmap_nonlazy().
Link: https://lkml.kernel.org/r/52f819991051f9b865e9ce25605509bfdbacadcd.1649277321.git.osandov@fb.com
Fixes: 690467c81b ("mm/vmalloc: Move draining areas out of caller context")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge the 32- and 64-bit implementations of load_gs_index().
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20220325153953.162643-5-brgerst@gmail.com
GS is always a user segment now.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20220325153953.162643-4-brgerst@gmail.com
If you are copying to an address in the kmap region, you may not copy
across a page boundary, no matter what the size of the underlying
allocation. You can't kmap() a slab page because slab pages always
come from low memory.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220110231530.665970-2-willy@infradead.org
Add support for CMPXCHG loops on userspace addresses. Provide both an
"unsafe" version for tight loops that do their own uaccess begin/end, as
well as a "safe" version for use cases where the CMPXCHG is not buried in
a loop, e.g. KVM will resume the guest instead of looping when emulation
of a guest atomic accesses fails the CMPXCHG.
Provide 8-byte versions for 32-bit kernels so that KVM can do CMPXCHG on
guest PAE PTEs, which are accessed via userspace addresses.
Guard the asm_volatile_goto() variation with CC_HAS_ASM_GOTO_TIED_OUTPUT,
the "+m" constraint fails on some compilers that otherwise support
CC_HAS_ASM_GOTO_OUTPUT.
Cc: stable@vger.kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220202004945.2540433-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use static calls to improve kvm_pmu_ops performance, following the same
pattern and naming scheme used by kvm-x86-ops.h.
Here are the worst fenced_rdtsc() cycles numbers for the kvm_pmu_ops
functions that is most often called (up to 7 digits of calls) when running
a single perf test case in a guest on an ICX 2.70GHz host (mitigations=on):
| legacy | static call
------------------------------------------------------------
.pmc_idx_to_pmc | 1304840 | 994872 (+23%)
.pmc_is_enabled | 978670 | 1011750 (-3%)
.msr_idx_to_pmc | 47828 | 41690 (+12%)
.is_valid_msr | 28786 | 30108 (-4%)
Signed-off-by: Like Xu <likexu@tencent.com>
[sean: Handle static call updates in pmu.c, tweak changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220329235054.3534728-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The pmu_ops should be moved to kvm_x86_init_ops and tagged as __initdata.
That'll save those precious few bytes, and more importantly make
the original ops unreachable, i.e. make it harder to sneak in post-init
modification bugs.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220329235054.3534728-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The kvm_ops_static_call_update() is defined in kvm_host.h. That's
completely unnecessary, it should have exactly one caller,
kvm_arch_hardware_setup(). Move the helper to x86.c and have it do the
actual memcpy() of the ops in addition to the static call updates. This
will also allow for cleanly giving kvm_pmu_ops static_call treatment.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
[sean: Move memcpy() into the helper and rename accordingly]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220329235054.3534728-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Derive the mask of RWX bits reported on EPT violations from the mask of
RWX bits that are shoved into EPT entries; the layout is the same, the
EPT violation bits are simply shifted by three. Use the new shift and a
slight copy-paste of the mask derivation instead of completely open
coding the same to convert between the EPT entry bits and the exit
qualification when synthesizing a nested EPT Violation.
No functional change intended.
Cc: SU Hang <darcy.sh@antgroup.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220329030108.97341-3-darcy.sh@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using self-expressing macro definition EPT_VIOLATION_GVA_VALIDATION
and EPT_VIOLATION_GVA_TRANSLATED instead of 0x180
in FNAME(walk_addr_generic)().
Signed-off-by: SU Hang <darcy.sh@antgroup.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220329030108.97341-2-darcy.sh@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adjust the field pkru_mask to the back of direct_map to make up 8-byte
alignment.This reduces the size of kvm_mmu by 8 bytes.
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Message-Id: <20220228030749.88353-1-flyingpeng@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Merge branch for features that did not make it into 5.18:
* New ioctls to get/set TSC frequency for a whole VM
* Allow userspace to opt out of hypercall patching
Nested virtualization improvements for AMD:
* Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
* Allow AVIC to co-exist with a nested guest running
* Fixes for LBR virtualizations when a nested guest is running,
and nested LBR virtualization support
* PAUSE filtering for nested hypervisors
Guest support:
* Decoupling of vcpu_is_preempted from PV spinlocks
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Daniel stumbled over the bit overlap of the i82498DX external APIC and the
TSC deadline timer configuration bit in modern APICs, which is neither
documented in the code nor in the current SDM. Maciej provided links to
the original i82489DX/486 documentation. See Link.
Remove the i82489DX macro maze, use a i82489DX specific define in the apic
code and document the overlap in a comment.
Reported-by: Daniel Vacek <neelx@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/87ee22f3ci.ffs@tglx
* Miscellaneous bugfixes
* A small cleanup for the new workqueue code
* Documentation syntax fix
RISC-V:
* Remove hgatp zeroing in kvm_arch_vcpu_put()
* Fix alignment of the guest_hang() in KVM selftest
* Fix PTE A and D bits in KVM selftest
* Missing #include in vcpu_fp.c
ARM:
* Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2
* Fix the MMU write-lock not being taken on THP split
* Fix mixed-width VM handling
* Fix potential UAF when debugfs registration fails
* Various selftest updates for all of the above
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJVtdMUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO33QgAiPh80xUkYfnl8FVN440S5F7UOPQ2
Cs/PbroNoP+Oz2GoG07aaqnUkFFApeBE5S+VMu1zhRNAernqpreN64/Y2iNaz0Y6
+MbvEX0FhQRW0UZJIF2m49ilgO8Gkt6aEpVRulq5G9w4NWiH1PtR25FVXfDMi8OG
xdw4x1jwXNI9lOQJ5EpUKVde3rAbxCfoC6hCTh5pCNd9oLuVeLfnC+Uv91fzXltl
EIeBlV0/mAi3RLp2E/AX38WP6ucMZqOOAy91/RTqX6oIx/7QL28ZNHXVrwQ67Hkd
pAr3MAk84tZL58lnosw53i5aXAf9CBp0KBnpk2KGutfRNJ4Vzs1e+DZAJA==
=vqAv
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"x86:
- Miscellaneous bugfixes
- A small cleanup for the new workqueue code
- Documentation syntax fix
RISC-V:
- Remove hgatp zeroing in kvm_arch_vcpu_put()
- Fix alignment of the guest_hang() in KVM selftest
- Fix PTE A and D bits in KVM selftest
- Missing #include in vcpu_fp.c
ARM:
- Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2
- Fix the MMU write-lock not being taken on THP split
- Fix mixed-width VM handling
- Fix potential UAF when debugfs registration fails
- Various selftest updates for all of the above"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (24 commits)
KVM: x86: hyper-v: Avoid writing to TSC page without an active vCPU
KVM: SVM: Do not activate AVIC for SEV-enabled guest
Documentation: KVM: Add SPDX-License-Identifier tag
selftests: kvm: add tsc_scaling_sync to .gitignore
RISC-V: KVM: include missing hwcap.h into vcpu_fp
KVM: selftests: riscv: Fix alignment of the guest_hang() function
KVM: selftests: riscv: Set PTE A and D bits in VS-stage page table
RISC-V: KVM: Don't clear hgatp CSR in kvm_arch_vcpu_put()
selftests: KVM: Free the GIC FD when cleaning up in arch_timer
selftests: KVM: Don't leak GIC FD across dirty log test iterations
KVM: Don't create VM debugfs files outside of the VM directory
KVM: selftests: get-reg-list: Add KVM_REG_ARM_FW_REG(3)
KVM: avoid NULL pointer dereference in kvm_dirty_ring_push
KVM: arm64: selftests: Introduce vcpu_width_config
KVM: arm64: mixed-width check should be skipped for uninitialized vCPUs
KVM: arm64: vgic: Remove unnecessary type castings
KVM: arm64: Don't split hugepages outside of MMU write lock
KVM: arm64: Drop unneeded minor version check from PSCI v1.x handler
KVM: arm64: Actually prevent SMC64 SYSTEM_RESET2 from AArch32
KVM: arm64: Generally disallow SMC64 for AArch32 guests
...
struct stat (defined in arch/x86/include/uapi/asm/stat.h) has 32-bit
st_dev and st_rdev; struct compat_stat (defined in
arch/x86/include/asm/compat.h) has 16-bit st_dev and st_rdev followed by
a 16-bit padding.
This patch fixes struct compat_stat to match struct stat.
[ Historical note: the old x86 'struct stat' did have that 16-bit field
that the compat layer had kept around, but it was changes back in 2003
by "struct stat - support larger dev_t":
https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=e95b2065677fe32512a597a79db94b77b90c968d
and back in those days, the x86_64 port was still new, and separate
from the i386 code, and had already picked up the old version with a
16-bit st_dev field ]
Note that we can't change compat_dev_t because it is used by
compat_loop_info.
Also, if the st_dev and st_rdev values are 32-bit, we don't have to use
old_valid_dev to test if the value fits into them. This fixes
-EOVERFLOW on filesystems that are on NVMe because NVMe uses the major
number 259.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
GS is now always a user segment, so there is no difference between user
and kernel registers.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20220325153953.162643-2-brgerst@gmail.com
The following WARN is triggered from kvm_vm_ioctl_set_clock():
WARNING: CPU: 10 PID: 579353 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:3161 mark_page_dirty_in_slot+0x6c/0x80 [kvm]
...
CPU: 10 PID: 579353 Comm: qemu-system-x86 Tainted: G W O 5.16.0.stable #20
Hardware name: LENOVO 20UF001CUS/20UF001CUS, BIOS R1CET65W(1.34 ) 06/17/2021
RIP: 0010:mark_page_dirty_in_slot+0x6c/0x80 [kvm]
...
Call Trace:
<TASK>
? kvm_write_guest+0x114/0x120 [kvm]
kvm_hv_invalidate_tsc_page+0x9e/0xf0 [kvm]
kvm_arch_vm_ioctl+0xa26/0xc50 [kvm]
? schedule+0x4e/0xc0
? __cond_resched+0x1a/0x50
? futex_wait+0x166/0x250
? __send_signal+0x1f1/0x3d0
kvm_vm_ioctl+0x747/0xda0 [kvm]
...
The WARN was introduced by commit 03c0304a86bc ("KVM: Warn if
mark_page_dirty() is called without an active vCPU") but the change seems
to be correct (unlike Hyper-V TSC page update mechanism). In fact, there's
no real need to actually write to guest memory to invalidate TSC page, this
can be done by the first vCPU which goes through kvm_guest_time_update().
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220407201013.963226-1-vkuznets@redhat.com>
Since current AVIC implementation cannot support encrypted memory,
inhibit AVIC for SEV-enabled guest.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220408133710.54275-1-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A microcode update on some Intel processors causes all TSX transactions
to always abort by default[*]. Microcode also added functionality to
re-enable TSX for development purposes. With this microcode loaded, if
tsx=on was passed on the cmdline, and TSX development mode was already
enabled before the kernel boot, it may make the system vulnerable to TSX
Asynchronous Abort (TAA).
To be on safer side, unconditionally disable TSX development mode during
boot. If a viable use case appears, this can be revisited later.
[*]: Intel TSX Disable Update for Selected Processors, doc ID: 643557
[ bp: Drop unstable web link, massage heavily. ]
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/347bd844da3a333a9793c6687d4e4eb3b2419a3e.1646943780.git.pawan.kumar.gupta@linux.intel.com
- Use local labels in the exception table macros to avoid symbol
conflicts with clang LTO builds
- A couple of fixes to objtool checking of the relatively newly added
SLS and IBT code
- Rename a local var in the WARN* macro machinery to prevent shadowing
-----BEGIN PGP SIGNATURE-----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=kMtP
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix the MSI message data struct definition
- Use local labels in the exception table macros to avoid symbol
conflicts with clang LTO builds
- A couple of fixes to objtool checking of the relatively newly added
SLS and IBT code
- Rename a local var in the WARN* macro machinery to prevent shadowing
* tag 'x86_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/msi: Fix msi message data shadow struct
x86/extable: Prefer local labels in .set directives
x86,bpf: Avoid IBT objtool warning
objtool: Fix SLS validation for kcov tail-call replacement
objtool: Fix IBT tail-call detection
x86/bug: Prevent shadowing in __WARN_FLAGS
x86/mm/tlb: Revert retpoline avoidance approach
- A couple of fixes to event encoding on Sapphire Rapids
- Pass event caps of inherited events so that perf doesn't fail wrongly at fork()
- Add support for a new Raptor Lake CPU
-----BEGIN PGP SIGNATURE-----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=ba3V
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- A couple of fixes to cgroup-related handling of perf events
- A couple of fixes to event encoding on Sapphire Rapids
- Pass event caps of inherited events so that perf doesn't fail wrongly
at fork()
- Add support for a new Raptor Lake CPU
* tag 'perf_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Always set cpuctx cgrp when enable cgroup event
perf/core: Fix perf_cgroup_switch()
perf/core: Use perf_cgroup_info->active to check if cgroup is active
perf/core: Don't pass task around when ctx sched in
perf/x86/intel: Update the FRONTEND MSR mask on Sapphire Rapids
perf/x86/intel: Don't extend the pseudo-encoding to GP counters
perf/core: Inherit event_caps
perf/x86/uncore: Add Raptor Lake uncore support
perf/x86/msr: Add Raptor Lake CPU support
perf/x86/cstate: Add Raptor Lake support
perf/x86: Add Intel Raptor Lake support
Handle the $IRT PCI IRQ Routing Table format used by AMI for its BCP
(BIOS Configuration Program) external tool meant for tweaking BIOS
structures without the need to rebuild it from sources[1].
The $IRT format has been invented by AMI before Microsoft has come up
with its $PIR format and a $IRT table is therefore there in some systems
that lack a $PIR table, such as the DataExpert EXP8449 mainboard based
on the ALi FinALi 486 chipset (M1489/M1487), which predates DMI 2.0 and
cannot therefore be easily identified at run time.
Unlike with the $PIR format there is no alignment guarantee as to the
placement of the $IRT table, so scan the whole BIOS area bytewise.
Credit to Michal Necasek for helping me chase documentation for the
format.
References:
[1] "What is BCP? - AMI", <https://www.ami.com/what-is-bcp/>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> # crosvm
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203302228410.9038@angie.orcam.me.uk
ACPI firmware advertises PCI host bridge resources via PNP0A03 _CRS
methods. Some BIOSes include non-window address space in _CRS, and if we
allocate that non-window space for PCI devices, they don't work.
4dc2287c18 ("x86: avoid E820 regions when allocating address space")
works around this issue by clipping out any regions mentioned in the E820
table in the allocate_resource() path, but the implementation has a couple
issues:
- The clipping is done for *all* allocations, not just those for PCI
address space, and
- The clipping is done at each allocation instead of being done once when
setting up the host bridge windows.
Rework the implementation so we only clip PCI host bridge windows, and we
do it once when setting them up.
Example output changes:
BIOS-e820: [mem 0x00000000b0000000-0x00000000c00fffff] reserved
+ acpi PNP0A08:00: clipped [mem 0xc0000000-0xfebfffff window] to [mem 0xc0100000-0xfebfffff window] for e820 entry [mem 0xb0000000-0xc00fffff]
- pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
+ pci_bus 0000:00: root bus resource [mem 0xc0100000-0xfebfffff window]
Link: https://lore.kernel.org/r/20220304035110.988712-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
While running inside virtual machine, the kernel can bypass cache
flushing. Changing sleep state in a virtual machine doesn't affect the
host system sleep state and cannot lead to data loss.
Before entering sleep states, the ACPI code flushes caches to prevent
data loss using the WBINVD instruction. This mechanism is required on
bare metal.
But, any use WBINVD inside of a guest is worthless. Changing sleep
state in a virtual machine doesn't affect the host system sleep state
and cannot lead to data loss, so most hypervisors simply ignore it.
Despite this, the ACPI code calls WBINVD unconditionally anyway.
It's useless, but also normally harmless.
In TDX guests, though, WBINVD stops being harmless; it triggers a
virtualization exception (#VE). If the ACPI cache-flushing WBINVD
were left in place, TDX guests would need handling to recover from
the exception.
Avoid using WBINVD whenever running under a hypervisor. This both
removes the useless WBINVDs and saves TDX from implementing WBINVD
handling.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-30-kirill.shutemov@linux.intel.com
Intel TDX doesn't allow VMM to directly access guest private memory.
Any memory that is required for communication with the VMM must be
shared explicitly. The same rule applies for any DMA to and from the
TDX guest. All DMA pages have to be marked as shared pages. A generic way
to achieve this without any changes to device drivers is to use the
SWIOTLB framework.
The previous patch ("Add support for TDX shared memory") gave TDX guests
the _ability_ to make some pages shared, but did not make any pages
shared. This actually marks SWIOTLB buffers *as* shared.
Start returning true for cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT) in
TDX guests. This has several implications:
- Allows the existing mem_encrypt_init() to be used for TDX which
sets SWIOTLB buffers shared (aka. "decrypted").
- Ensures that all DMA is routed via the SWIOTLB mechanism (see
pci_swiotlb_detect())
Stop selecting DYNAMIC_PHYSICAL_MASK directly. It will get set
indirectly by selecting X86_MEM_ENCRYPT.
mem_encrypt_init() is currently under an AMD-specific #ifdef. Move it to
a generic area of the header.
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220405232939.73860-28-kirill.shutemov@linux.intel.com
Secondary CPU startup is currently performed with something called
the "INIT/SIPI protocol". This protocol requires assistance from
VMMs to boot guests. As should be a familiar story by now, that
support can not be provded to TDX guests because TDX VMMs are
not trusted by guests.
To remedy this situation a new[1] "Multiprocessor Wakeup Structure"
has been added to to an existing ACPI table (MADT). This structure
provides the physical address of a "mailbox". A write to the mailbox
then steers the secondary CPU to the boot code.
Add ACPI MADT wake structure parsing support and wake support. Use
this support to wake CPUs whenever it is present instead of INIT/SIPI.
While this structure can theoretically be used on 32-bit kernels,
there are no 32-bit TDX guest kernels. It has not been tested and
can not practically *be* tested on 32-bit. Make it 64-bit only.
1. Details about the new structure can be found in ACPI v6.4, in the
"Multiprocessor Wakeup Structure" section.
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220405232939.73860-22-kirill.shutemov@linux.intel.com
Historically, x86 platforms have booted secondary processors (APs)
using INIT followed by the start up IPI (SIPI) messages. In regular
VMs, this boot sequence is supported by the VMM emulation. But such a
wakeup model is fatal for secure VMs like TDX in which VMM is an
untrusted entity. To address this issue, a new wakeup model was added
in ACPI v6.4, in which firmware (like TDX virtual BIOS) will help boot
the APs. More details about this wakeup model can be found in ACPI
specification v6.4, the section titled "Multiprocessor Wakeup Structure".
Since the existing trampoline code requires processors to boot in real
mode with 16-bit addressing, it will not work for this wakeup model
(because it boots the AP in 64-bit mode). To handle it, extend the
trampoline code to support 64-bit mode firmware handoff. Also, extend
IDT and GDT pointers to support 64-bit mode hand off.
There is no TDX-specific detection for this new boot method. The kernel
will rely on it as the sole boot method whenever the new ACPI structure
is present.
The ACPI table parser for the MADT multiprocessor wake up structure and
the wakeup method that uses this structure will be added by the following
patch in this series.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-21-kirill.shutemov@linux.intel.com
KVM hypercalls use the VMCALL or VMMCALL instructions. Although the ABI
is similar, those instructions no longer function for TDX guests.
Make vendor-specific TDVMCALLs instead of VMCALL. This enables TDX
guests to run with KVM acting as the hypervisor.
Among other things, KVM hypercall is used to send IPIs.
Since the KVM driver can be built as a kernel module, export
tdx_kvm_hypercall() to make the symbols visible to kvm.ko.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-20-kirill.shutemov@linux.intel.com
TDX guests cannot do port I/O directly. The TDX module triggers a #VE
exception to let the guest kernel emulate port I/O by converting them
into TDCALLs to call the host.
But before IDT handlers are set up, port I/O cannot be emulated using
normal kernel #VE handlers. To support the #VE-based emulation during
this boot window, add a minimal early #VE handler support in early
exception handlers. This is similar to what AMD SEV does. This is
mainly to support earlyprintk's serial driver, as well as potentially
the VGA driver.
The early handler only supports I/O-related #VE exceptions. Unhandled or
failed exceptions will be handled via early_fixup_exceptions() (like
normal exception failures). At runtime I/O-related #VE exceptions (along
with other types) handled by virt_exception_kernel().
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220405232939.73860-19-kirill.shutemov@linux.intel.com
Port I/O instructions trigger #VE in the TDX environment. In response to
the exception, kernel emulates these instructions using hypercalls.
But during early boot, on the decompression stage, it is cumbersome to
deal with #VE. It is cleaner to go to hypercalls directly, bypassing #VE
handling.
Hook up TDX-specific port I/O helpers if booting in TDX environment.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220405232939.73860-17-kirill.shutemov@linux.intel.com
There are two implementations of port I/O helpers: one in the kernel and
one in the boot stub.
Move the helpers required for both to <asm/shared/io.h> and use the one
implementation everywhere.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-15-kirill.shutemov@linux.intel.com
Change port I/O helpers to use u8/u16/u32 instead of unsigned
char/short/int for values. Use u16 instead of int for port number.
It aligns the helpers with implementation in boot stub in preparation
for consolidation.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-14-kirill.shutemov@linux.intel.com
The early decompression code does port I/O for its console output. But,
handling the decompression-time port I/O demands a different approach
from normal runtime because the IDT required to support #VE based port
I/O emulation is not yet set up. Paravirtualizing I/O calls during
the decompression step is acceptable because the decompression code
doesn't have a lot of call sites to IO instruction.
To support port I/O in decompression code, TDX must be detected before
the decompression code might do port I/O. Detect whether the kernel runs
in a TDX guest.
Add an early_is_tdx_guest() interface to query the cached TDX guest
status in the decompression code.
TDX is detected with CPUID. Make cpuid_count() accessible outside
boot/cpuflags.c.
TDX detection in the main kernel is very similar. Move common bits
into <asm/shared/tdx.h>.
The actual port I/O paravirtualization will come later in the series.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220405232939.73860-13-kirill.shutemov@linux.intel.com
The HLT instruction is a privileged instruction, executing it stops
instruction execution and places the processor in a HALT state. It
is used in kernel for cases like reboot, idle loop and exception fixup
handlers. For the idle case, interrupts will be enabled (using STI)
before the HLT instruction (this is also called safe_halt()).
To support the HLT instruction in TDX guests, it needs to be emulated
using TDVMCALL (hypercall to VMM). More details about it can be found
in Intel Trust Domain Extensions (Intel TDX) Guest-Host-Communication
Interface (GHCI) specification, section TDVMCALL[Instruction.HLT].
In TDX guests, executing HLT instruction will generate a #VE, which is
used to emulate the HLT instruction. But #VE based emulation will not
work for the safe_halt() flavor, because it requires STI instruction to
be executed just before the TDCALL. Since idle loop is the only user of
safe_halt() variant, handle it as a special case.
To avoid *safe_halt() call in the idle function, define the
tdx_guest_idle() and use it to override the "x86_idle" function pointer
for a valid TDX guest.
Alternative choices like PV ops have been considered for adding
safe_halt() support. But it was rejected because HLT paravirt calls
only exist under PARAVIRT_XXL, and enabling it in TDX guest just for
safe_halt() use case is not worth the cost.
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220405232939.73860-9-kirill.shutemov@linux.intel.com
Virtualization Exceptions (#VE) are delivered to TDX guests due to
specific guest actions which may happen in either user space or the
kernel:
* Specific instructions (WBINVD, for example)
* Specific MSR accesses
* Specific CPUID leaf accesses
* Access to specific guest physical addresses
Syscall entry code has a critical window where the kernel stack is not
yet set up. Any exception in this window leads to hard to debug issues
and can be exploited for privilege escalation. Exceptions in the NMI
entry code also cause issues. Returning from the exception handler with
IRET will re-enable NMIs and nested NMI will corrupt the NMI stack.
For these reasons, the kernel avoids #VEs during the syscall gap and
the NMI entry code. Entry code paths do not access TD-shared memory,
MMIO regions, use #VE triggering MSRs, instructions, or CPUID leaves
that might generate #VE. VMM can remove memory from TD at any point,
but access to unaccepted (or missing) private memory leads to VM
termination, not to #VE.
Similarly to page faults and breakpoints, #VEs are allowed in NMI
handlers once the kernel is ready to deal with nested NMIs.
During #VE delivery, all interrupts, including NMIs, are blocked until
TDGETVEINFO is called. It prevents #VE nesting until the kernel reads
the VE info.
TDGETVEINFO retrieves the #VE info from the TDX module, which also
clears the "#VE valid" flag. This must be done before anything else as
any #VE that occurs while the valid flag is set escalates to #DF by TDX
module. It will result in an oops.
Virtual NMIs are inhibited if the #VE valid flag is set. NMI will not be
delivered until TDGETVEINFO is called.
For now, convert unhandled #VE's (everything, until later in this
series) so that they appear just like a #GP by calling the
ve_raise_fault() directly. The ve_raise_fault() function is similar
to #GP handler and is responsible for sending SIGSEGV to userspace
and CPU die and notifying debuggers and other die chain users.
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220405232939.73860-8-kirill.shutemov@linux.intel.com
Guests communicate with VMMs with hypercalls. Historically, these
are implemented using instructions that are known to cause VMEXITs
like VMCALL, VMLAUNCH, etc. However, with TDX, VMEXITs no longer
expose the guest state to the host. This prevents the old hypercall
mechanisms from working. So, to communicate with VMM, TDX
specification defines a new instruction called TDCALL.
In a TDX based VM, since the VMM is an untrusted entity, an intermediary
layer -- TDX module -- facilitates secure communication between the host
and the guest. TDX module is loaded like a firmware into a special CPU
mode called SEAM. TDX guests communicate with the TDX module using the
TDCALL instruction.
A guest uses TDCALL to communicate with both the TDX module and VMM.
The value of the RAX register when executing the TDCALL instruction is
used to determine the TDCALL type. A leaf of TDCALL used to communicate
with the VMM is called TDVMCALL.
Add generic interfaces to communicate with the TDX module and VMM
(using the TDCALL instruction).
__tdx_module_call() - Used to communicate with the TDX module (via
TDCALL instruction).
__tdx_hypercall() - Used by the guest to request services from
the VMM (via TDVMCALL leaf of TDCALL).
Also define an additional wrapper _tdx_hypercall(), which adds error
handling support for the TDCALL failure.
The __tdx_module_call() and __tdx_hypercall() helper functions are
implemented in assembly in a .S file. The TDCALL ABI requires
shuffling arguments in and out of registers, which proved to be
awkward with inline assembly.
Just like syscalls, not all TDVMCALL use cases need to use the same
number of argument registers. The implementation here picks the current
worst-case scenario for TDCALL (4 registers). For TDCALLs with fewer
than 4 arguments, there will end up being a few superfluous (cheap)
instructions. But, this approach maximizes code reuse.
For registers used by the TDCALL instruction, please check TDX GHCI
specification, the section titled "TDCALL instruction" and "TDG.VP.VMCALL
Interface".
Based on previous patch by Sean Christopherson.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-4-kirill.shutemov@linux.intel.com
Secure Arbitration Mode (SEAM) is an extension of VMX architecture. It
defines a new VMX root operation (SEAM VMX root) and a new VMX non-root
operation (SEAM VMX non-root) which are both isolated from the legacy
VMX operation where the host kernel runs.
A CPU-attested software module (called 'TDX module') runs in SEAM VMX
root to manage and protect VMs running in SEAM VMX non-root. SEAM VMX
root is also used to host another CPU-attested software module (called
'P-SEAMLDR') to load and update the TDX module.
Host kernel transits to either P-SEAMLDR or TDX module via the new
SEAMCALL instruction, which is essentially a VMExit from VMX root mode
to SEAM VMX root mode. SEAMCALLs are leaf functions defined by
P-SEAMLDR and TDX module around the new SEAMCALL instruction.
A guest kernel can also communicate with TDX module via TDCALL
instruction.
TDCALLs and SEAMCALLs use an ABI different from the x86-64 system-v ABI.
RAX is used to carry both the SEAMCALL leaf function number (input) and
the completion status (output). Additional GPRs (RCX, RDX, R8-R11) may
be further used as both input and output operands in individual leaf.
TDCALL and SEAMCALL share the same ABI and require the largely same
code to pass down arguments and retrieve results.
Define an assembly macro that can be used to implement C wrapper for
both TDCALL and SEAMCALL.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-3-kirill.shutemov@linux.intel.com
In preparation of extending cc_platform_has() API to support TDX guest,
use CPUID instruction to detect support for TDX guests in the early
boot code (via tdx_early_init()). Since copy_bootdata() is the first
user of cc_platform_has() API, detect the TDX guest status before it.
Define a synthetic feature flag (X86_FEATURE_TDX_GUEST) and set this
bit in a valid TDX guest platform.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-2-kirill.shutemov@linux.intel.com
Version 2 of the GHCB specification provides a Non Automatic Exit (NAE)
event type that can be used by the SEV-SNP guest to communicate with the
PSP without risk from a malicious hypervisor who wishes to read, alter,
drop or replay the messages sent.
SNP_LAUNCH_UPDATE can insert two special pages into the guest’s memory:
the secrets page and the CPUID page. The PSP firmware populates the
contents of the secrets page. The secrets page contains encryption keys
used by the guest to interact with the firmware. Because the secrets
page is encrypted with the guest’s memory encryption key, the hypervisor
cannot read the keys. See SEV-SNP firmware spec for further details on
the secrets page format.
Create a platform device that the SEV-SNP guest driver can bind to get
the platform resources such as encryption key and message id to use to
communicate with the PSP. The SEV-SNP guest driver provides a userspace
interface to get the attestation report, key derivation, extended
attestation report etc.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-43-brijesh.singh@amd.com
Version 2 of GHCB specification provides SNP_GUEST_REQUEST and
SNP_EXT_GUEST_REQUEST NAE that can be used by the SNP guest to
communicate with the PSP.
While at it, add a snp_issue_guest_request() helper that will be used by
driver or other subsystem to issue the request to PSP.
See SEV-SNP firmware and GHCB spec for more details.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-42-brijesh.singh@amd.com
Initial/preliminary detection of SEV-SNP is done via the Confidential
Computing blob. Check for it prior to the normal SEV/SME feature
initialization, and add some sanity checks to confirm it agrees with
SEV-SNP CPUID/MSR bits.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-39-brijesh.singh@amd.com
Initial/preliminary detection of SEV-SNP is done via the Confidential
Computing blob. Check for it prior to the normal SEV/SME feature
initialization, and add some sanity checks to confirm it agrees with
SEV-SNP CPUID/MSR bits.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-35-brijesh.singh@amd.com
The previously defined Confidential Computing blob is provided to the
kernel via a setup_data structure or EFI config table entry. Currently,
these are both checked for by boot/compressed kernel to access the CPUID
table address within it for use with SEV-SNP CPUID enforcement.
To also enable that enforcement for the run-time kernel, similar
access to the CPUID table is needed early on while it's still using
the identity-mapped page table set up by boot/compressed, where global
pointers need to be accessed via fixup_pointer().
This isn't much of an issue for accessing setup_data, and the EFI config
table helper code currently used in boot/compressed *could* be used in
this case as well since they both rely on identity-mapping. However, it
has some reliance on EFI helpers/string constants that would need to be
accessed via fixup_pointer(), and fixing it up while making it shareable
between boot/compressed and run-time kernel is fragile and introduces a
good bit of ugliness.
Instead, add a boot_params->cc_blob_address pointer that the
boot/compressed kernel can initialize so that the run-time kernel can
access the CC blob from there instead of re-scanning the EFI config
table.
Also document these in Documentation/x86/zero-page.rst. While there,
add missing documentation for the acpi_rsdp_addr field, which serves a
similar purpose in providing the run-time kernel a pointer to the ACPI
RSDP table so that it does not need to [re-]scan the EFI configuration
table.
[ bp: Fix typos, massage commit message. ]
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-34-brijesh.singh@amd.com
CPUID instructions generate a #VC exception for SEV-ES/SEV-SNP guests,
for which early handlers are currently set up to handle. In the case
of SEV-SNP, guests can use a configurable location in guest memory
that has been pre-populated with a firmware-validated CPUID table to
look up the relevant CPUID values rather than requesting them from
hypervisor via a VMGEXIT. Add the various hooks in the #VC handlers to
allow CPUID instructions to be handled via the table. The code to
actually configure/enable the table will be added in a subsequent
commit.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-33-brijesh.singh@amd.com
Determining which CPUID leafs have significant ECX/index values is
also needed by guest kernel code when doing SEV-SNP-validated CPUID
lookups. Move this to common code to keep future updates in sync.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-31-brijesh.singh@amd.com
While launching encrypted guests, the hypervisor may need to provide
some additional information during the guest boot. When booting under an
EFI-based BIOS, the EFI configuration table contains an entry for the
confidential computing blob that contains the required information.
To support booting encrypted guests on non-EFI VMs, the hypervisor
needs to pass this additional information to the guest kernel using a
different method.
For this purpose, introduce SETUP_CC_BLOB type in setup_data to hold
the physical address of the confidential computing blob location. The
boot loader or hypervisor may choose to use this method instead of an
EFI configuration table. The CC blob location scanning should give
preference to a setup_data blob over an EFI configuration table.
In AMD SEV-SNP, the CC blob contains the address of the secrets and
CPUID pages. The secrets page includes information such as a VM to PSP
communication key and the CPUID page contains PSP-filtered CPUID values.
Define the AMD SEV confidential computing blob structure.
While at it, define the EFI GUID for the confidential computing blob.
[ bp: Massage commit message, mark struct __packed. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220307213356.2797205-30-brijesh.singh@amd.com
The x86 MSI message data is 32 bits in total and is either in
compatibility or remappable format, see Intel Virtualization Technology
for Directed I/O, section 5.1.2.
Fixes: 6285aa5073 ("x86/msi: Provide msi message shadow structs")
Co-developed-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Reto Buerki <reet@codelabs.ch>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220407110647.67372-1-reet@codelabs.ch
Bernardo reported an error that Nathan bisected down to
(x86_64) defconfig+LTO_CLANG_FULL+X86_PMEM_LEGACY.
LTO vmlinux.o
ld.lld: error: <instantiation>:1:13: redefinition of 'found'
.set found, 0
^
<inline asm>:29:1: while in macro instantiation
extable_type_reg reg=%eax, type=(17 | ((0) << 16))
^
This appears to be another LTO specific issue similar to what was folded
into commit 4b5305decc ("x86/extable: Extend extable functionality"),
where the `.set found, 0` in DEFINE_EXTABLE_TYPE_REG in
arch/x86/include/asm/asm.h conflicts with the symbol for the static
function `found` in arch/x86/kernel/pmem.c.
Assembler .set directive declare symbols with global visibility, so the
assembler may not rename such symbols in the event of a conflict. LTO
could rename static functions if there was a conflict in C sources, but
it cannot see into symbols defined in inline asm.
The symbols are also retained in the symbol table, regardless of LTO.
Give the symbols .L prefixes making them locally visible, so that they
may be renamed for LTO to avoid conflicts, and to drop them from the
symbol table regardless of LTO.
Fixes: 4b5305decc ("x86/extable: Extend extable functionality")
Reported-by: Bernardo Meurer Costa <beme@google.com>
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220329202148.2379697-1-ndesaulniers@google.com
Due to
103a4908ad ("x86/head/64: Disable stack protection for head$(BITS).o")
kernel/head{32,64}.c are compiled with -fno-stack-protector to allow
a call to set_bringup_idt_handler(), which would otherwise have stack
protection enabled with CONFIG_STACKPROTECTOR_STRONG.
While sufficient for that case, there may still be issues with calls to
any external functions that were compiled with stack protection enabled
that in-turn make stack-protected calls, or if the exception handlers
set up by set_bringup_idt_handler() make calls to stack-protected
functions.
Subsequent patches for SEV-SNP CPUID validation support will introduce
both such cases. Attempting to disable stack protection for everything
in scope to address that is prohibitive since much of the code, like the
SEV-ES #VC handler, is shared code that remains in use after boot and
could benefit from having stack protection enabled. Attempting to inline
calls is brittle and can quickly balloon out to library/helper code
where that's not really an option.
Instead, re-enable stack protection for head32.c/head64.c, and make the
appropriate changes to ensure the segment used for the stack canary is
initialized in advance of any stack-protected C calls.
For head64.c:
- The BSP will enter from startup_64() and call into C code
(startup_64_setup_env()) shortly after setting up the stack, which
may result in calls to stack-protected code. Set up %gs early to allow
for this safely.
- APs will enter from secondary_startup_64*(), and %gs will be set up
soon after. There is one call to C code prior to %gs being setup
(__startup_secondary_64()), but it is only to fetch 'sme_me_mask'
global, so just load 'sme_me_mask' directly instead, and remove the
now-unused __startup_secondary_64() function.
For head32.c:
- BSPs/APs will set %fs to __BOOT_DS prior to any C calls. In recent
kernels, the compiler is configured to access the stack canary at
%fs:__stack_chk_guard [1], which overlaps with the initial per-cpu
'__stack_chk_guard' variable in the initial/"master" .data..percpu
area. This is sufficient to allow access to the canary for use
during initial startup, so no changes are needed there.
[1] 3fb0fdb3bb ("x86/stackprotector/32: Make the canary into a regular percpu variable")
[ bp: Massage commit message. ]
Suggested-by: Joerg Roedel <jroedel@suse.de> #for 64-bit %gs set up
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-24-brijesh.singh@amd.com
To provide a more secure way to start APs under SEV-SNP, use the SEV-SNP
AP Creation NAE event. This allows for guest control over the AP register
state rather than trusting the hypervisor with the SEV-ES Jump Table
address.
During native_smp_prepare_cpus(), invoke an SEV-SNP function that, if
SEV-SNP is active, will set/override apic->wakeup_secondary_cpu. This
will allow the SEV-SNP AP Creation NAE event method to be used to boot
the APs. As a result of installing the override when SEV-SNP is active,
this method of starting the APs becomes the required method. The override
function will fail to start the AP if the hypervisor does not have
support for AP creation.
[ bp: Work in forgotten review comments. ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-23-brijesh.singh@amd.com
Add the needed functionality to change pages state from shared
to private and vice-versa using the Page State Change VMGEXIT as
documented in the GHCB spec.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-22-brijesh.singh@amd.com
early_set_memory_{encrypted,decrypted}() are used for changing the page
state from decrypted (shared) to encrypted (private) and vice versa.
When SEV-SNP is active, the page state transition needs to go through
additional steps.
If the page is transitioned from shared to private, then perform the
following after the encryption attribute is set in the page table:
1. Issue the page state change VMGEXIT to add the page as a private
in the RMP table.
2. Validate the page after its successfully added in the RMP table.
To maintain the security guarantees, if the page is transitioned from
private to shared, then perform the following before clearing the
encryption attribute from the page table.
1. Invalidate the page.
2. Issue the page state change VMGEXIT to make the page shared in the
RMP table.
early_set_memory_{encrypted,decrypted}() can be called before the GHCB
is setup so use the SNP page state MSR protocol VMGEXIT defined in the
GHCB specification to request the page state change in the RMP table.
While at it, add a helper snp_prep_memory() which will be used in
probe_roms(), in a later patch.
[ bp: Massage commit message. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-19-brijesh.singh@amd.com
The SEV-SNP guest is required by the GHCB spec to register the GHCB's
Guest Physical Address (GPA). This is because the hypervisor may prefer
that a guest uses a consistent and/or specific GPA for the GHCB associated
with a vCPU. For more information, see the GHCB specification section
"GHCB GPA Registration".
[ bp: Cleanup comments. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-18-brijesh.singh@amd.com
The SEV-SNP guest is required by the GHCB spec to register the GHCB's
Guest Physical Address (GPA). This is because the hypervisor may prefer
that a guest use a consistent and/or specific GPA for the GHCB associated
with a vCPU. For more information, see the GHCB specification section
"GHCB GPA Registration".
If hypervisor can not work with the guest provided GPA then terminate the
guest boot.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-17-brijesh.singh@amd.com
Many of the integrity guarantees of SEV-SNP are enforced through the
Reverse Map Table (RMP). Each RMP entry contains the GPA at which a
particular page of DRAM should be mapped. The VMs can request the
hypervisor to add pages in the RMP table via the Page State Change
VMGEXIT defined in the GHCB specification.
Inside each RMP entry is a Validated flag; this flag is automatically
cleared to 0 by the CPU hardware when a new RMP entry is created for a
guest. Each VM page can be either validated or invalidated, as indicated
by the Validated flag in the RMP entry. Memory access to a private page
that is not validated generates a #VC. A VM must use the PVALIDATE
instruction to validate a private page before using it.
To maintain the security guarantee of SEV-SNP guests, when transitioning
pages from private to shared, the guest must invalidate the pages before
asking the hypervisor to change the page state to shared in the RMP table.
After the pages are mapped private in the page table, the guest must
issue a page state change VMGEXIT to mark the pages private in the RMP
table and validate them.
Upon boot, BIOS should have validated the entire system memory.
During the kernel decompression stage, early_setup_ghcb() uses
set_page_decrypted() to make the GHCB page shared (i.e. clear encryption
attribute). And while exiting from the decompression, it calls
set_page_encrypted() to make the page private.
Add snp_set_page_{private,shared}() helpers that are used by
set_page_{decrypted,encrypted}() to change the page state in the RMP
table.
[ bp: Massage commit message and comments. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-16-brijesh.singh@amd.com
The Virtual Machine Privilege Level (VMPL) feature in the SEV-SNP
architecture allows a guest VM to divide its address space into four
levels. The level can be used to provide hardware isolated abstraction
layers within a VM. VMPL0 is the highest privilege level, and VMPL3 is
the least privilege level. Certain operations must be done by the VMPL0
software, such as:
* Validate or invalidate memory range (PVALIDATE instruction)
* Allocate VMSA page (RMPADJUST instruction when VMSA=1)
The initial SNP support requires that the guest kernel is running at
VMPL0. Add such a check to verify the guest is running at level 0 before
continuing the boot. There is no easy method to query the current VMPL
level, so use the RMPADJUST instruction to determine whether the guest
is running at the VMPL0.
[ bp: Massage commit message. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-15-brijesh.singh@amd.com
An SNP-active guest uses the PVALIDATE instruction to validate or
rescind the validation of a guest page’s RMP entry. Upon completion, a
return code is stored in EAX and rFLAGS bits are set based on the return
code. If the instruction completed successfully, the carry flag (CF)
indicates if the content of the RMP were changed or not.
See AMD APM Volume 3 for additional details.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-14-brijesh.singh@amd.com
Version 2 of the GHCB specification added the advertisement of features
that are supported by the hypervisor. If the hypervisor supports SEV-SNP
then it must set the SEV-SNP features bit to indicate that the base
functionality is supported.
Check that feature bit while establishing the GHCB; if failed, terminate
the guest.
Version 2 of the GHCB specification adds several new Non-Automatic Exits
(NAEs), most of them are optional except the hypervisor feature. Now
that the hypervisor feature NAE is implemented, bump the GHCB maximum
supported protocol version.
While at it, move the GHCB protocol negotiation check from the #VC
exception handler to sev_enable() so that all feature detection happens
before the first #VC exception.
While at it, document why the GHCB page cannot be setup from
load_stage2_idt().
[ bp: Massage commit message. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-13-brijesh.singh@amd.com
The SEV-ES guest calls sev_es_negotiate_protocol() to negotiate the GHCB
protocol version before establishing the GHCB. Cache the negotiated GHCB
version so that it can be used later.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-12-brijesh.singh@amd.com
The GHCB specification defines the reason code for reason set 0. The
reason codes defined in the set 0 do not cover all possible causes for a
guest to request termination.
The reason sets 1 to 255 are reserved for the vendor-specific codes.
Reserve the reason set 1 for the Linux guest. Define the error codes for
reason set 1 so that one can have meaningful termination reasons and thus
better guest failure diagnosis.
While at it, change sev_es_terminate() to accept a reason set parameter.
[ bp: Massage commit message. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-11-brijesh.singh@amd.com
The CC_ATTR_GUEST_SEV_SNP can be used by the guest to query whether the
SNP (Secure Nested Paging) feature is active.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-10-brijesh.singh@amd.com
The current set of helpers used throughout the run-time kernel have
dependencies on code/facilities outside of the boot kernel, so there
are a number of call-sites throughout the boot kernel where inline
assembly is used instead. More will be added with subsequent patches
that add support for SEV-SNP, so take the opportunity to provide a basic
set of helpers that can be used by the boot kernel to reduce reliance on
inline assembly.
Use boot_* prefix so that it's clear these are helpers specific to the
boot kernel to avoid any confusion with the various other MSR read/write
helpers.
[ bp: Disambiguate parameter names and trim comment. ]
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-6-brijesh.singh@amd.com
This is the final step in defining the multiple save areas to keep them
separate and ensuring proper operation amongst the different types of
guests. Update the SEV-ES/SEV-SNP save area to match the APM. This save
area will be used for the upcoming SEV-SNP AP Creation NAE event support.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-5-brijesh.singh@amd.com
The initial implementation of the GHCB spec was based on trying to keep
the register state offsets the same relative to the VM save area. However,
the save area for SEV-ES has changed within the hardware causing the
relation between the SEV-ES save area to change relative to the GHCB save
area.
This is the second step in defining the multiple save areas to keep them
separate and ensuring proper operation amongst the different types of
guests. Create a GHCB save area that matches the GHCB specification.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-4-brijesh.singh@amd.com
The save area for SEV-ES/SEV-SNP guests, as used by the hardware, is
different from the save area of a non SEV-ES/SEV-SNP guest.
This is the first step in defining the multiple save areas to keep them
separate and ensuring proper operation amongst the different types of
guests. Create an SEV-ES/SEV-SNP save area and adjust usage to the new
save area definition where needed.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220405182743.308853-1-brijesh.singh@amd.com
amd_cache_northbridges() is exported by amd_nb.c and is called by
amd64-agp.c and amd64_edac.c modules at module_init() time so that NB
descriptors are properly cached before those drivers can use them.
However, the init_amd_nbs() initcall already does call
amd_cache_northbridges() unconditionally and thus makes sure the NB
descriptors are enumerated.
That initcall is a fs_initcall type which is on the 5th group (starting
from 0) of initcalls that gets run in increasing numerical order by the
init code.
The module_init() call is turned into an __initcall() in the MODULE=n
case and those are device-level initcalls, i.e., group 6.
Therefore, the northbridges caching is already finished by the time
module initialization starts and thus the correct initialization order
is retained.
Unexport amd_cache_northbridges(), update dependent modules to
call amd_nb_num() instead. While at it, simplify the checks in
amd_cache_northbridges().
[ bp: Heavily massage and *actually* explain why the change is ok. ]
Signed-off-by: Muralidhara M K <muralimk@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220324122729.221765-1-nchatrad@amd.com
The hypervisor uses the sev_features field (offset 3B0h) in the Save State
Area to control the SEV-SNP guest features such as SNPActive, vTOM,
ReflectVC etc. An SEV-SNP guest can read the sev_features field through
the SEV_STATUS MSR.
While at it, update dump_vmcb() to log the VMPL level.
See APM2 Table 15-34 and B-4 for more details.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-2-brijesh.singh@amd.com
Resolve nx_huge_pages to true/false when kvm.ko is loaded, leaving it as
-1 is technically undefined behavior when its value is read out by
param_get_bool(), as boolean values are supposed to be '0' or '1'.
Alternatively, KVM could define a custom getter for the param, but the
auto value doesn't depend on the vendor module in any way, and printing
"auto" would be unnecessarily unfriendly to the user.
In addition to fixing the undefined behavior, resolving the auto value
also fixes the scenario where the auto value resolves to N and no vendor
module is loaded. Previously, -1 would result in Y being printed even
though KVM would ultimately disable the mitigation.
Rename the existing MMU module init/exit helpers to clarify that they're
invoked with respect to the vendor module, and add comments to document
why KVM has two separate "module init" flows.
=========================================================================
UBSAN: invalid-load in kernel/params.c:320:33
load of value 255 is not a valid value for type '_Bool'
CPU: 6 PID: 892 Comm: tail Not tainted 5.17.0-rc3+ #799
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
ubsan_epilogue+0x5/0x40
__ubsan_handle_load_invalid_value.cold+0x43/0x48
param_get_bool.cold+0xf/0x14
param_attr_show+0x55/0x80
module_attr_show+0x1c/0x30
sysfs_kf_seq_show+0x93/0xc0
seq_read_iter+0x11c/0x450
new_sync_read+0x11b/0x1a0
vfs_read+0xf0/0x190
ksys_read+0x5f/0xe0
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
=========================================================================
Fixes: b8e8c8303f ("kvm: mmu: ITLB_MULTIHIT mitigation")
Cc: stable@vger.kernel.org
Reported-by: Bruno Goncalves <bgoncalv@redhat.com>
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220331221359.3912754-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The macro __WARN_FLAGS() uses a local variable named "f". This being a
common name, there is a risk of shadowing other variables.
For example, GCC would yield:
| In file included from ./include/linux/bug.h:5,
| from ./include/linux/cpumask.h:14,
| from ./arch/x86/include/asm/cpumask.h:5,
| from ./arch/x86/include/asm/msr.h:11,
| from ./arch/x86/include/asm/processor.h:22,
| from ./arch/x86/include/asm/timex.h:5,
| from ./include/linux/timex.h:65,
| from ./include/linux/time32.h:13,
| from ./include/linux/time.h:60,
| from ./include/linux/stat.h:19,
| from ./include/linux/module.h:13,
| from virt/lib/irqbypass.mod.c:1:
| ./include/linux/rcupdate.h: In function 'rcu_head_after_call_rcu':
| ./arch/x86/include/asm/bug.h:80:21: warning: declaration of 'f' shadows a parameter [-Wshadow]
| 80 | __auto_type f = BUGFLAG_WARNING|(flags); \
| | ^
| ./include/asm-generic/bug.h:106:17: note: in expansion of macro '__WARN_FLAGS'
| 106 | __WARN_FLAGS(BUGFLAG_ONCE | \
| | ^~~~~~~~~~~~
| ./include/linux/rcupdate.h:1007:9: note: in expansion of macro 'WARN_ON_ONCE'
| 1007 | WARN_ON_ONCE(func != (rcu_callback_t)~0L);
| | ^~~~~~~~~~~~
| In file included from ./include/linux/rbtree.h:24,
| from ./include/linux/mm_types.h:11,
| from ./include/linux/buildid.h:5,
| from ./include/linux/module.h:14,
| from virt/lib/irqbypass.mod.c:1:
| ./include/linux/rcupdate.h:1001:62: note: shadowed declaration is here
| 1001 | rcu_head_after_call_rcu(struct rcu_head *rhp, rcu_callback_t f)
| | ~~~~~~~~~~~~~~~^
For reference, sparse also warns about it, c.f. [1].
This patch renames the variable from f to __flags (with two underscore
prefixes as suggested in the Linux kernel coding style [2]) in order
to prevent collisions.
[1] https://lore.kernel.org/all/CAFGhKbyifH1a+nAMCvWM88TK6fpNPdzFtUXPmRGnnQeePV+1sw@mail.gmail.com/
[2] Linux kernel coding style, section 12) Macros, Enums and RTL,
paragraph 5) namespace collisions when defining local variables in
macros resembling functions
https://www.kernel.org/doc/html/latest/process/coding-style.html#macros-enums-and-rtl
Fixes: bfb1a7c91f ("x86/bug: Merge annotate_reachable() into_BUG_FLAGS() asm")
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20220324023742.106546-1-mailhol.vincent@wanadoo.fr
On AMD Fam19h Zen3, the branch sampling (BRS) feature must be disabled before
entering low power and re-enabled (if was active) when returning from low
power. Otherwise, the NMI interrupt may be held up for too long and cause
problems. Stopping BRS will cause the NMI to be delivered if it was held up.
Define a perf_amd_brs_lopwr_cb() callback to stop/restart BRS. The callback
is protected by a jump label which is enabled only when AMD BRS is detected.
In all other cases, the callback is never called.
Signed-off-by: Stephane Eranian <eranian@google.com>
[peterz: static_call() and build fixes]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220322221517.2510440-10-eranian@google.com
Add support for the AMD Fam19h 16-deep branch sampling feature as
described in the AMD PPR Fam19h Model 01h Revision B1. This is a model
specific extension. It is not an architected AMD feature.
The Branch Sampling (BRS) operates with a 16-deep saturating buffer in MSR
registers. There is no branch type filtering. All control flow changes are
captured. BRS relies on specific programming of the core PMU of Fam19h. In
particular, the following requirements must be met:
- the sampling period be greater than 16 (BRS depth)
- the sampling period must use a fixed and not frequency mode
BRS interacts with the NMI interrupt as well. Because enabling BRS is
expensive, it is only activated after P event occurrences, where P is the
desired sampling period. At P occurrences of the event, the counter
overflows, the CPU catches the interrupt, activates BRS for 16 branches until
it saturates, and then delivers the NMI to the kernel. Between the overflow
and the time BRS activates more branches may be executed skewing the period.
All along, the sampling event keeps counting. The skid may be attenuated by
reducing the sampling period by 16 (subsequent patch).
BRS is integrated into perf_events seamlessly via the same
PERF_RECORD_BRANCH_STACK sample format. BRS generates perf_branch_entry
records in the sampling buffer. No prediction information is supported. The
branches are stored in reverse order of execution. The most recent branch is
the first entry in each record.
No modification to the perf tool is necessary.
BRS can be used with any sampling event. However, it is recommended to use
the RETIRED_BRANCH_INSTRUCTIONS event because it matches what the BRS
captures.
$ perf record -b -c 1000037 -e cpu/event=0xc2,name=ret_br_instructions/ test
$ perf report -D
56531696056126 0x193c000 [0x1a8]: PERF_RECORD_SAMPLE(IP, 0x2): 18122/18230: 0x401d24 period: 1000037 addr: 0
... branch stack: nr:16
..... 0: 0000000000401d24 -> 0000000000401d5a 0 cycles 0
..... 1: 0000000000401d5c -> 0000000000401d24 0 cycles 0
..... 2: 0000000000401d22 -> 0000000000401d5c 0 cycles 0
..... 3: 0000000000401d5e -> 0000000000401d22 0 cycles 0
..... 4: 0000000000401d20 -> 0000000000401d5e 0 cycles 0
..... 5: 0000000000401d3e -> 0000000000401d20 0 cycles 0
..... 6: 0000000000401d42 -> 0000000000401d3e 0 cycles 0
..... 7: 0000000000401d3c -> 0000000000401d42 0 cycles 0
..... 8: 0000000000401d44 -> 0000000000401d3c 0 cycles 0
..... 9: 0000000000401d3a -> 0000000000401d44 0 cycles 0
..... 10: 0000000000401d46 -> 0000000000401d3a 0 cycles 0
..... 11: 0000000000401d38 -> 0000000000401d46 0 cycles 0
..... 12: 0000000000401d48 -> 0000000000401d38 0 cycles 0
..... 13: 0000000000401d36 -> 0000000000401d48 0 cycles 0
..... 14: 0000000000401d4a -> 0000000000401d36 0 cycles 0
..... 15: 0000000000401d34 -> 0000000000401d4a 0 cycles 0
... thread: test:18230
...... dso: test
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220322221517.2510440-4-eranian@google.com
Add a cpu feature for AMD Fam19h Branch Sampling feature as bit
31 of EBX on CPUID leaf function 0x80000008.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220322221517.2510440-3-eranian@google.com
The INST_RETIRED.PREC_DIST event (0x0100) doesn't count on SPR.
perf stat -e cpu/event=0xc0,umask=0x0/,cpu/event=0x0,umask=0x1/ -C0
Performance counter stats for 'CPU(s) 0':
607,246 cpu/event=0xc0,umask=0x0/
0 cpu/event=0x0,umask=0x1/
The encoding for INST_RETIRED.PREC_DIST is pseudo-encoding, which
doesn't work on the generic counters. However, current perf extends its
mask to the generic counters.
The pseudo event-code for a fixed counter must be 0x00. Check and avoid
extending the mask for the fixed counter event which using the
pseudo-encoding, e.g., ref-cycles and PREC_DIST event.
With the patch,
perf stat -e cpu/event=0xc0,umask=0x0/,cpu/event=0x0,umask=0x1/ -C0
Performance counter stats for 'CPU(s) 0':
583,184 cpu/event=0xc0,umask=0x0/
583,048 cpu/event=0x0,umask=0x1/
Fixes: 2de71ee153 ("perf/x86/intel: Fix ICL/SPR INST_RETIRED.PREC_DIST encodings")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1648482543-14923-1-git-send-email-kan.liang@linux.intel.com
The volatile attribute in the inline assembly of arch_raw_cpu_ptr()
forces the compiler to always generate the code, even if the compiler
can decide upfront that its result is not needed.
For instance invoking __intel_pmu_disable_all(false) (like
intel_pmu_snapshot_arch_branch_stack() does) leads to loading the
address of &cpu_hw_events into the register while compiler knows that it
has no need for it. This ends up with code like:
| movq $cpu_hw_events, %rax #, tcp_ptr__
| add %gs:this_cpu_off(%rip), %rax # this_cpu_off, tcp_ptr__
| xorl %eax, %eax # tmp93
It also creates additional code within local_lock() with !RT &&
!LOCKDEP which is not desired.
By removing the volatile attribute the compiler can place the
function freely and avoid it if it is not needed in the end.
By using the function twice the compiler properly caches only the
variable offset and always loads the CPU-offset.
this_cpu_ptr() also remains properly placed within a preempt_disable()
sections because
- arch_raw_cpu_ptr() assembly has a memory input ("m" (this_cpu_off))
- prempt_{dis,en}able() fundamentally has a 'barrier()' in it
Therefore this_cpu_ptr() is already properly serialized and does not
rely on the 'volatile' attribute.
Remove volatile from arch_raw_cpu_ptr().
[ bigeasy: Added Linus' explanation why this_cpu_ptr() is not moved out
of a preempt_disable() section without the 'volatile' attribute. ]
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220328145810.86783-2-bigeasy@linutronix.de
When a static call is updated with __static_call_return0() as target,
arch_static_call_transform() set it to use an optimised set of
instructions which are meant to lay in the same cacheline.
But when initialising a static call with DEFINE_STATIC_CALL_RET0(),
we get a branch to the real __static_call_return0() function instead
of getting the optimised setup:
c00d8120 <__SCT__perf_snapshot_branch_stack>:
c00d8120: 4b ff ff f4 b c00d8114 <__static_call_return0>
c00d8124: 3d 80 c0 0e lis r12,-16370
c00d8128: 81 8c 81 3c lwz r12,-32452(r12)
c00d812c: 7d 89 03 a6 mtctr r12
c00d8130: 4e 80 04 20 bctr
c00d8134: 38 60 00 00 li r3,0
c00d8138: 4e 80 00 20 blr
c00d813c: 00 00 00 00 .long 0x0
Add ARCH_DEFINE_STATIC_CALL_RET0_TRAMP() defined by each architecture
to setup the optimised configuration, and rework
DEFINE_STATIC_CALL_RET0() to call it:
c00d8120 <__SCT__perf_snapshot_branch_stack>:
c00d8120: 48 00 00 14 b c00d8134 <__SCT__perf_snapshot_branch_stack+0x14>
c00d8124: 3d 80 c0 0e lis r12,-16370
c00d8128: 81 8c 81 3c lwz r12,-32452(r12)
c00d812c: 7d 89 03 a6 mtctr r12
c00d8130: 4e 80 04 20 bctr
c00d8134: 38 60 00 00 li r3,0
c00d8138: 4e 80 00 20 blr
c00d813c: 00 00 00 00 .long 0x0
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/1e0a61a88f52a460f62a58ffc2a5f847d1f7d9d8.1647253456.git.christophe.leroy@csgroup.eu
In the x86 code __arch_set_user_pkey_access() is not used and is not
defined.
Remove the dead declaration.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220331180655.2946086-1-ira.weiny@intel.com
arch_set_user_pkey_access() was declared two times in the header.
Remove the 2nd declaration.
Suggested-by: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220331180554.2945884-1-ira.weiny@intel.com
It doesn't make any sense to disable non-executable mappings -
security-wise or else.
So rip out that switch and move the remaining code into setup.c and
delete setup_nx.c
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220127115626.14179-6-bp@alien8.de
Those were added as part of the SMAP enablement but SMAP is currently
an integral part of kernel proper and there's no need to disable it
anymore.
Rip out that functionality. Leave --uaccess default on for objtool as
this is what objtool should do by default anyway.
If still needed - clearcpuid=smap.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220127115626.14179-4-bp@alien8.de
Having to give the X86_FEATURE array indices in order to disable a
feature bit for testing is not really user-friendly. So accept the
feature bit names too.
Some feature bits don't have names so there the array indices are still
accepted, of course.
Clearing CPUID flags is not something which should be done in production
so taint the kernel too.
An exemplary cmdline would then be something like:
clearcpuid=de,440,smca,succory,bmi1,3dnow
("succory" is wrong on purpose). And it says:
[ ... ] Clearing CPUID bits: de 13:24 smca (unknown: succory) bmi1 3dnow
[ Fix CONFIG_X86_FEATURE_NAMES=n build error as reported by the 0day
robot: https://lore.kernel.org/r/202203292206.ICsY2RKX-lkp@intel.com ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220127115626.14179-2-bp@alien8.de
In order to fix:
vmlinux.o: warning: objtool: __sev_es_nmi_complete()+0x4c: call to ghcb_set_sw_exit_code() leaves .noinstr.text section
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220324183607.31717-3-bp@alien8.de
* Documentation improvements
* Prevent module exit until all VMs are freed
* PMU Virtualization fixes
* Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences
* Other miscellaneous bugfixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJIGV8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO5FQgAhls4+Nu+NqId/yvvyNxr3vXq0dHI
hLlHtvzgGzZisZ7y2bNeyIpJVBDT5LCbrptPD/5eTvchVswDh0+kCVC0Uni5ugGT
tLT/Pv9Oq9e0X7aGdHRyuHIivIFDC20zIZO2DV48Lrj/+r6DafB2Fghq2XQLlBxN
p8KislvuqAAos543BPC1+Lk3dhOLuZ8qcFD8wGRlcCwjNwYaitrQ16rO04cLfUur
OwIks1I6TdI2JpLBhm6oWYVG/YnRsoo4bQE8cjdQ6yNSbwWtRpV33q7X6onw8x8K
BEeESoTnMqfaxIF/6mPl6bnDblVHFp6Xhld/vJcgeWQTdajFtuFE/K4sCA==
=xnQ6
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
- Documentation improvements
- Prevent module exit until all VMs are freed
- PMU Virtualization fixes
- Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences
- Other miscellaneous bugfixes
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: x86: fix sending PV IPI
KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
KVM: x86: Remove redundant vm_entry_controls_clearbit() call
KVM: x86: cleanup enter_rmode()
KVM: x86: SVM: fix tsc scaling when the host doesn't support it
kvm: x86: SVM: remove unused defines
KVM: x86: SVM: move tsc ratio definitions to svm.h
KVM: x86: SVM: fix avic spec based definitions again
KVM: MIPS: remove reference to trap&emulate virtualization
KVM: x86: document limitations of MSR filtering
KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr
KVM: x86/emulator: Emulate RDPID only if it is enabled in guest
KVM: x86/pmu: Fix and isolate TSX-specific performance event logic
KVM: x86: mmu: trace kvm_mmu_set_spte after the new SPTE was set
KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
KVM: x86: Trace all APICv inhibit changes and capture overall status
KVM: x86: Add wrappers for setting/clearing APICv inhibits
KVM: x86: Make APICv inhibit reasons an enum and cleanup naming
KVM: X86: Handle implicit supervisor access with SMAP
KVM: X86: Rename variable smap to not_smap in permission_fault()
...
Add optional callback .vcpu_get_apicv_inhibit_reasons returning
extra inhibit reasons that prevent APICv from working on this vCPU.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322174050.241850-6-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This sets the default TSC frequency for subsequently created vCPUs.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20220225145304.36166-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for SCHEDOP_poll hypercall.
This implementation is optimized for polling for a single channel, which
is what Linux does. Polling for multiple channels is not especially
efficient (and has not been tested).
PV spinlocks slow path uses this hypercall, and explicitly crash if it's
not supported.
[ dwmw2: Rework to use kvm_vcpu_halt(), not supported for 32-bit guests ]
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-17-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Windows uses a per-vCPU vector, and it's delivered via the local APIC
basically like an MSI (with associated EOI) unlike the traditional
guest-wide vector which is just magically asserted by Xen (and in the
KVM case by kvm_xen_has_interrupt() / kvm_cpu_get_extint()).
Now that the kernel is able to raise event channel events for itself,
being able to do so for Windows guests is also going to be useful.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-15-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Turns out this is a fast path for PV guests because they use it to
trigger the event channel upcall. So letting it bounce all the way up
to userspace is not great.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-14-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the guest has offloaded the timer virq, handle the following
hypercalls for programming the timer:
VCPUOP_set_singleshot_timer
VCPUOP_stop_singleshot_timer
set_timer_op(timestamp_ns)
The event channel corresponding to the timer virq is then used to inject
events once timer deadlines are met. For now we back the PV timer with
hrtimer.
[ dwmw2: Add save/restore, 32-bit compat mode, immediate delivery,
don't check timer in kvm_vcpu_has_event() ]
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-13-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to intercept hypercalls such as VCPUOP_set_singleshot_timer, we
need to be aware of the Xen CPU numbering.
This looks a lot like the Hyper-V handling of vpidx, for obvious reasons.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-12-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Userspace registers a sending @port to either deliver to an @eventfd
or directly back to a local event channel port.
After binding events the guest or host may wish to bind those
events to a particular vcpu. This is usually done for unbound
and and interdomain events. Update requests are handled via the
KVM_XEN_EVTCHN_UPDATE flag.
Unregistered ports are handled by the emulator.
Co-developed-by: Ankur Arora <ankur.a.arora@oracle.com>
Co-developed-By: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-10-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This switches the final pvclock to kvm_setup_pvclock_pfncache() and now
the old kvm_setup_pvclock_page() can be removed.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-7-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, the fast path of kvm_xen_set_evtchn_fast() doesn't set the
index bits in the target vCPU's evtchn_pending_sel, because it only has
a userspace virtual address with which to do so. It just sets them in
the kernel, and kvm_xen_has_interrupt() then completes the delivery to
the actual vcpu_info structure when the vCPU runs.
Using a gfn_to_pfn_cache allows kvm_xen_set_evtchn_fast() to do the full
delivery in the common case.
Clean up the fallback case too, by moving the deferred delivery out into
a separate kvm_xen_inject_pending_events() function which isn't ever
called in atomic contexts as __kvm_xen_has_interrupt() is.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-6-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new kvm_setup_guest_pvclock() which parallels the existing
kvm_setup_pvclock_page(). The latter will be removed once we convert
all users to the gfn_to_pfn_cache version.
Using the new cache, we can potentially let kvm_set_guest_paused() set
the PVCLOCK_GUEST_STOPPED bit directly rather than having to delegate
to the vCPU via KVM_REQ_CLOCK_UPDATE. But not yet.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-5-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-4-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM handles the VMCALL/VMMCALL instructions very strangely. Even though
both of these instructions really should #UD when executed on the wrong
vendor's hardware (i.e. VMCALL on SVM, VMMCALL on VMX), KVM replaces the
guest's instruction with the appropriate instruction for the vendor.
Nonetheless, older guest kernels without commit c1118b3602 ("x86: kvm:
use alternatives for VMCALL vs. VMMCALL if kernel text is read-only")
do not patch in the appropriate instruction using alternatives, likely
motivating KVM's intervention.
Add a quirk allowing userspace to opt out of hypercall patching. If the
quirk is disabled, KVM synthesizes a #UD in the guest.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220316005538.2282772-2-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Another piece of SVM spec which should be in the header file
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-6-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to wrong rebase, commit
4a204f7895 ("KVM: SVM: Allow AVIC support on system w/ physical APIC ID > 255")
moved avic spec #defines back to avic.c.
Move them back, and while at it extend AVIC_DOORBELL_PHYSICAL_ID_MASK to 12
bits as well (it will be used in nested avic)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add set/clear wrappers for toggling APICv inhibits to make the call sites
more readable, and opportunistically rename the inner helpers to align
with the new wrappers and to make them more readable as well. Invert the
flag from "activate" to "set"; activate is painfully ambiguous as it's
not obvious if the inhibit is being activated, or if APICv is being
activated, in which case the inhibit is being deactivated.
For the functions that take @set, swap the order of the inhibit reason
and @set so that the call sites are visually similar to those that bounce
through the wrapper.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220311043517.17027-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use an enum for the APICv inhibit reasons, there is no meaning behind
their values and they most definitely are not "unsigned longs". Rename
the various params to "reason" for consistency and clarity (inhibit may
be confused as a command, i.e. inhibit APICv, instead of the reason that
is getting toggled/checked).
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220311043517.17027-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini