enable the Armada 37xx pinctrl driver
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWQNZMyMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71eV+AJ9BF4aQWP++
5XvbcEymvSUQpyHpEgCgglVHfSsQclyAAY6q193oSqJ+eR8=
=Wjq2
-----END PGP SIGNATURE-----
Merge tag 'mvebu-arm64-4.12-1' of git://git.infradead.org/linux-mvebu into fixes
Merge "mvebu arm64 for 4.12" from Gregory CLEMENT:
enable the Armada 37xx pinctrl driver
* tag 'mvebu-arm64-4.12-1' of git://git.infradead.org/linux-mvebu:
arm64: marvell: enable the Armada 37xx pinctrl driver
The sunxi clk driver causes a link error when the reset controller
subsystem is disabled:
drivers/clk/built-in.o: In function `sun4i_ve_clk_setup':
:(.init.text+0xd040): undefined reference to `reset_controller_register'
drivers/clk/built-in.o: In function `sun4i_a10_display_init':
:(.init.text+0xe5e0): undefined reference to `reset_controller_register'
drivers/clk/built-in.o: In function `sunxi_usb_clk_setup':
:(.init.text+0x10074): undefined reference to `reset_controller_register'
We already force it to be enabled on arm32 and some other arm64 platforms,
but not on arm64/sunxi. This adds the respective Kconfig statements to
also select it here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
1. Exynos power management drivers support now ARMv8 SoC - Exynos5433 - so
select them in ARCH_EXYNOS.
2. Enable few Exynos drivers for supported ARMv8 SoCs.
-----BEGIN PGP SIGNATURE-----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=lXKo
-----END PGP SIGNATURE-----
Merge tag 'samsung-soc64-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/arm64
Samsung ARM64 update for v4.12:
1. Exynos power management drivers support now ARMv8 SoC - Exynos5433 - so
select them in ARCH_EXYNOS.
2. Enable few Exynos drivers for supported ARMv8 SoCs.
* tag 'samsung-soc64-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: defconfig: Enable video, DRM and LPASS drivers for Exynos5433 and Exynos7
arm64: exynos: Enable Exynos PMU and PM domains drivers
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable EXYNOS_PM_DOMAINS because recently Exynos5433 got support for
Power Management domains. The Exynos5433 pinctrl driver requires
EXYNOS_PMU to get the syscon-regmap for PMU address space.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
As the pinctrl driver selecting is refactored in Kconfig file of
pinctrl-sunxi, now we can select only PINCTRL for Allwinner platform,
and the default value of several pinctrl drivers useful on ARM64
Allwinner SoCs will become Y.
This is the situation of 32-bit ARM ARCH_SUNXI option.
Drop the select of per-SoC pinctrl choices, but keep selecting PINCTRL.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add support for ThunderX2 CN99XX arm64 server processors.
Introduce a new arm64 platform config option ARCH_THUNDER2 for these
processors.
Signed-off-by: Jayachandran C <jnair@caviumnetworks.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Driver updates for ARM SoCs, including a couple of newly added drivers:
- A new driver for the power management controller on TI Keystone
- Support for the prerelease "SCPI" firmware protocol that ended up
being shipped by Amlogic in their GXBB SoC.
- A soc_device can now be matched using a glob from inside the
kernel, when another driver wants to know the specific chip
it is running on and cannot find out from DT, firmware or hardware.
- Renesas SoCs now support identification through the soc_device
interface, both in user space and kernel.
- Renesas r8a7743 and r8a7745 gain support for their system controller
- A new checking module for the ARM "PSCI" (not to be confused
with "SCPI" mentioned above) firmware interface.
- A new driver for the Tegra GMI memory interface
- Support for the Tegra firmware interfaces with their
power management controllers
As usual, the updates for the reset controller framework are merged
here, as they tend to touch multiple SoCs as well, including a new
driver for the Oxford (now Broadcom) OX820 chip and the Tegra
bpmp interface.
The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and
Rockchips SoCs see some further updates.
Conflicts:
- ARCH_RENESAS now selects SOC_BUS, but no longer needs GPIOLIB
- drivers/soc/renesas/Makefile: multiple files got added, keep
all in logical sorting
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6dP8
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Driver updates for ARM SoCs, including a couple of newly added
drivers:
- A new driver for the power management controller on TI Keystone
- Support for the prerelease "SCPI" firmware protocol that ended up
being shipped by Amlogic in their GXBB SoC.
- A soc_device can now be matched using a glob from inside the
kernel, when another driver wants to know the specific chip it is
running on and cannot find out from DT, firmware or hardware.
- Renesas SoCs now support identification through the soc_device
interface, both in user space and kernel.
- Renesas r8a7743 and r8a7745 gain support for their system
controller
- A new checking module for the ARM "PSCI" (not to be confused with
"SCPI" mentioned above) firmware interface.
- A new driver for the Tegra GMI memory interface
- Support for the Tegra firmware interfaces with their power
management controllers
As usual, the updates for the reset controller framework are merged
here, as they tend to touch multiple SoCs as well, including a new
driver for the Oxford (now Broadcom) OX820 chip and the Tegra bpmp
interface.
The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and
Rockchips SoCs see some further updates"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits)
misc: sram: remove useless #ifdef
drivers: psci: Allow PSCI node to be disabled
drivers: psci: PSCI checker module
soc: renesas: Identify SoC and register with the SoC bus
firmware: qcom: scm: Return PTR_ERR when devm_clk_get fails
firmware: qcom: scm: Remove core, iface and bus clocks dependency
dt-bindings: firmware: scm: Add MSM8996 DT bindings
memory: da8xx-ddrctl: drop the call to of_flat_dt_get_machine_name()
bus: da8xx-mstpri: drop the call to of_flat_dt_get_machine_name()
ARM: shmobile: Document DT bindings for Product Register
soc: renesas: rcar-sysc: add R8A7745 support
reset: Add Tegra BPMP reset driver
dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
dt-bindings: Add power domains to Tegra BPMP firmware
firmware: tegra: Add BPMP support
firmware: tegra: Add IVC library
dt-bindings: firmware: Add bindings for Tegra BPMP
mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
mailbox: Add Tegra HSP driver
firmware: arm_scpi: add support for pre-v1.0 SCPI compatible
...
Changes to platform code for 64-bit ARM platforms. We are not adding
any new platforms that require code or Kconfig changes this time, so
it's basically just defconfig changes to enable support for more
drivers used on the existing platforms.
This is mainly interesting for the Raspberry Pi 3, which should
now work much better with the default build.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIVAwUAWFLxS2CrR//JCVInAQJJDQ/9EVxolfQKMjld6M/ZpOaw1O/+rKUdFyUC
S6PIJgQD9/DIUVU+PMtHjljp+2GK0lJpLNXK3Tb4sJjx68ry9PSSHjZMEOJv33nE
mNsq3oQmbpPfZ6ufJrNqj1tS1ScxGDqudIx2L+DHwpg+lJjs984tKDQ4Ta18VI7m
k+a2IxoBWzGvzE50NFJppryZBq4p1WspfAkBLfohtTRGlCtmztbai6YZT0zfL1Iy
qdynNlh9yT5Y+JTTbnwPWJPH+YqsAMBeu/OqWyVfvpRc+fzPNIBNHrb5MfoWV6sP
JGyRUoQ0tDb0r+BTk68/5ALtKQQ40sxvPPpJgqRBy72gN5F4WhfIhfhP5zBMoyLU
X0pmPVB9CBFCz0BqUXcGofM/LvLLZeWOk+iAtl33AwmZ9U/e/e1Nobu9rqjv3hf1
nPqsDtisCo6RzDBfLCXX7XwX0GfRp3K81jWXIM7aULzhkrnFiPfz69qGFERLoTQf
w35n0YpT6yZDRsYYdTxprXD9y64fg4fKsp5XEQB6cE5Ea43AuH0WruxtazOGbJrz
nkatIO7dyK1/kl7fZZIxQiVY4F874j5X2bJPiCpB+vgDnkmPy8YV0PCfyRUA6jmK
sFsQFGTbqquXiKdtjwz+wrL0yRESgmCswaPBTiwD5cQC7s3GnCOkFsMvetuRLGk2
WSdHwEQ886k=
=B+Lz
-----END PGP SIGNATURE-----
Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC 64-bit updates from Arnd Bergmann:
"Changes to platform code for 64-bit ARM platforms. We are not adding
any new platforms that require code or Kconfig changes this time, so
it's basically just defconfig changes to enable support for more
drivers used on the existing platforms.
This is mainly interesting for the Raspberry Pi 3, which should now
work much better with the default build"
* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: defconfig: drop GPIO_SYSFS on multiplatforms
arm64: defconfig: Do not lower CONFIG_LOG_BUF_SHIFT
arm64: defconfig: allow rk3399-based boards to boot from mmc and usb
arm64: defconfig: enable RK808 components
arm64: defconfig: enable I2C and DW MMC controller on rockchip platform
arm64: defconfig: Enable Tegra186 SoC
ARM64: configs: Activate Internal PHY for Meson GXL
arm64: qcom: enable GPIOLIB in Kconfig
arm64: configs: enable configs for msm899(2/4) basic support
ARM64: bcm2835: add thermal driver to default config
ARM64: configs: Add Platform MHU in defconfig
MAINTAINERS: Update Broadcom Vulcan maintainer email
arm64: defconfig: enable EEPROM_AT25 config option
arm64: Enable HIBERNATION in defconfig
arm64: defconfig: Enable DRM DU and V4L2 FCP + VSP modules
ARM64: defconfig: Enable MMC related configs
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig
Identify the SoC type and revision, and register this information with
the SoC bus, so it is available under /sys/devices/soc0/, and can be
checked where needed using soc_device_match().
Identification is done using the Product Register or Common Chip Code
Register, as declared in DT (PRR only for now), or using a hardcoded
fallback if missing.
Example:
Detected Renesas R-Car Gen2 r8a7791 ES1.0
...
# cat /sys/devices/soc0/{machine,family,soc_id,revision}
Koelsch
R-Car Gen2
r8a7791
ES1.0
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
While debugging a kernel image size issue, I discovered that if all
non ARCH_QCOM configs in the ARM64 defconfig are disabled, the QCOM
pinctrl drivers will not be built.
The QCOM pinctrl drivers have a dependency on GPIOLIB which was being
selected when other ARCH configs were enabled, but ARCH_QCOM doesn't
select GPIOLIB directly. Let's select GPIOLIB here to ensure the pinctrl
drivers are built for QCOM platforms.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The UniPhier reset driver (drivers/reset/reset-uniphier.c) has been
merged. Select ARCH_HAS_RESET_CONTROLLER from the SoC Kconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The 64-bit DT changes are surprisingly small this time, we only add two
SoC platforms: the ZTE ZX296718 Set-top-box SoC and the SocioNext
UniPhier LD11 TV SoC, each with their reference boards.
There are three new machines added for existing SoC platforms:
- The Marvell Armada 8040 development board is an impressive quad-core
Cortex-A72 machine with three 10gbit ethernet interfaces
- Qualcomms DragonBoard 820c single-board computer is their current
high-end phone platform in the 96boards form factor
- Rockchip: Tronsmart Orion r86 set-top-box is a popular mid-range
Android box based on the 8-core rk3368 SoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=PxJN
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM 64-bit DT updates from Arnd Bergmann:
"The 64-bit DT changes are surprisingly small this time, we only add
two SoC platforms: the ZTE ZX296718 Set-top-box SoC and the SocioNext
UniPhier LD11 TV SoC, each with their reference boards.
There are three new machines added for existing SoC platforms:
- The Marvell Armada 8040 development board is an impressive
quad-core Cortex-A72 machine with three 10gbit ethernet interfaces
- Qualcomms DragonBoard 820c single-board computer is their current
high-end phone platform in the 96boards form factor
- Rockchip: Tronsmart Orion r86 set-top-box is a popular mid-range
Android box based on the 8-core rk3368 SoC"
* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (91 commits)
arm64: dts: berlin4ct: Add L2 cache topology
arm64: dts: berlin4ct: enable all wdt nodes unconditionally
arm64: dts: berlin4ct: switch to Cortex-A53 specific pmu nodes
arm64: dts: Add ZTE ZX296718 SoC dts and Makefile
arm64: dts: apm: Add DT node for APM X-Gene 2 CPU clocks
arm64: dts: apm: Add X-Gene SoC hwmon to device tree
arm64: dts: apm: Fix interrupt polarity for X-Gene PCIe legacy interrupts
arm64: dts: apm: Add APM X-Gene v2 SoC PMU DTS entries
arm64: dts: apm: Add APM X-Gene SoC PMU DTS entries
arm64: dts: marvell: enable MSI for PCIe on Armada 7K/8K
arm64: dts: ls2080a: Add 'dma-coherent' for ls2080a PCI nodes
arm64: dts: rockchip: add Type-C phy for RK3399
arm64: dts: rockchip: enable the gmac for rk3399 evb board
arm64: dts: rockchip: add the gmac needed node for rk3399
arm64: dts: rockchip: support the pmu node for rk3399
arm64: dts: rockchip: change all interrupts cells to 4 on rk3399 SoCs
arm64: dts: rockchip: add the tcpc for rk3399 power domain
arm64: dts: rockchip: add efuse0 device node for rk3399
arm64: dts: rockchip: configure PCIe support for rk3399-evb
arm64: dts: rockchip: add the PCIe controller support for RK3399
...
Changes to platform code for 64-bit ARM platforms.
Nearly all of these are defconfig updates to enable new drivers or old
drivers still used on these 64-bit platforms.
Aside from that, we gain initial support for two set-top-box platforms,
both of which already have 32-bit support in arch/arm:
- Broadcom adds abstract support for the bcm7xxx/brcmstb platform,
presumably the respective dts files and more information will
follow at a later point.
- The ZTE ZX296718 SoC for set-top-boxes, a relative of the 32-bit
ZX296702 SoC that we already support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5Whi
-----END PGP SIGNATURE-----
Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC 64-bit updates from Arnd Bergmann:
"Changes to platform code for 64-bit ARM platforms.
Nearly all of these are defconfig updates to enable new drivers or old
drivers still used on these 64-bit platforms.
Aside from that, we gain initial support for two set-top-box
platforms, both of which already have 32-bit support in arch/arm:
- Broadcom adds abstract support for the bcm7xxx/brcmstb platform,
presumably the respective dts files and more information will
follow at a later point.
- The ZTE ZX296718 SoC for set-top-boxes, a relative of the 32-bit
ZX296702 SoC that we already support"
* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: add ZTE ZX SoC family
arm64: defconfig: enable ZTE ZX related config
arm64: defconfig: enable common modules for power management
arm64: defconfig: enable meson I2C
arm64: defconfig: enable meson SPI as module
arm64: defconfig: enable meson WDT as modules
arm64: defconfig: enable HW random as module
arm64: defconfig: Enable SDHI and GPIO_REGULATOR
arm64: configs: enable PCIe driver for Aardvark
Kconfig: ARCH_HISI: Add PINCTRL to HISI platform
arm64: defconfig: enable bluetooth supports as modules
arm64: defconfig: enable CONFIG_INPUT_HISI_POWERKEY for HiKey
arm64: defconfig: Enable HiSilicon kirin drm, adv7533 for HiKey
arm64: defconfig: Enable Hisi SAS and HNS
arm64: defconfig: Enable QDF2432 config options
arm64: sunxi: Kconfig: add essential pinctrl driver
arm64: defconfig: Add Renesas R-Car HSUSB driver support as module
arm64: Add Broadcom Set Top Box Kconfig entry point
arm64: defconfig: enable xhci-platform
Subsystem improvements:
- Do away with the last users of the obsolete Kconfig options
ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter
always sounded like an item on a wishlist to Santa Claus to
me). We can now select GPIOLIB and be done with it, for all
archs. After some struggle it even work on UM. Not that it has
GPIO, but if it wants to, it can select the library.
- Continued efforts to make drivers properly either tristate or
bool.
- Introduce a warning for drivers assigning default triggers to
their irqchip lines when probed from device tree, so we find and
fix these ambigous drivers. It is agreed that in the OF config
path, the device tree defines trigger characteristics.
- The same warning, mutatis mutandis, for ACPI-probed GPIO
irqchips.
- We introduce the ability to mark certain IRQ lines as "unusable"
as they can be taken by BIOS/firmware, unrouted in silicon and
generally nasty if you use them, and such things. This is
put to good use in the STMPE driver and also in the Cherryview
pin control driver.
- A new "mockup" virtual GPIO device that can be used for testing.
The plan is to add unit tests under tools/* for exercising this
device and verify that the kernel code paths are working as they
should.
- Make memory-mapped I/O-drivers depend on HAS_IOMEM. This was
implicit all the time, but when people started building UM
with allyesconfig or allmodconfig it exploded in their face.
- Move some stray bits of device tree and ACPI HW description
callbacks down into their respective implementation silo. These
were causing issues when compiling on !HAS_IOMEM as well, so
now eventually UM compiles the GPIOLIB library if it wants to.
New drivers:
- New driver for the Aspeed GPIO front-end companion to the
pin controller merged through the pin control tree.
- New driver for the LP873x PMIC GPIO portions.
- New driver for Technologic Systems' I2C FPGA GPIO such as
TS4900, TS-7970, TS-7990 and TS-4100.
- New driver for the Broadcom BCM63xx series including BCM6338
and BCM6345.
- New driver for the Intel WhiskeyCove PMIC GPIO.
- New driver for the Allwinner AXP209 PMIC GPIO portions.
- New driver for Diamond Systems 48 line GPIO-MM, another of
these port-mapped I/O expansion cards.
- Support the STMicroelectronics STMPE1600 variant in the STMPE
driver.
Driver improvements:
- The STMPE driver now supports rising/falling edge detection
properly for IRQs.
- The PCA954x will now fetch and enable its VCC regulator properly.
- Major rework of the PCA953x driver with the goal of eventually
switching it over to use regmap and thus modernize it even more.
- Switch the IOP driver to use the generic MMIO GPIO library.
- Move the ages old HTC EGPIO (extended GPIO) GPIO expander driver
over to this subsystem from MFD, achieveing some separation of
concerns.
-----BEGIN PGP SIGNATURE-----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=ABbi
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.9 series:
Subsystem improvements:
- do away with the last users of the obsolete Kconfig options
ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter
always sounded like an item on a wishlist to Santa Claus to me). We
can now select GPIOLIB and be done with it, for all archs. After
some struggle it even work on UM. Not that it has GPIO, but if it
wants to, it can select the library.
- continued efforts to make drivers properly either tristate or bool.
- introduce a warning for drivers assigning default triggers to their
irqchip lines when probed from device tree, so we find and fix
these ambigous drivers. It is agreed that in the OF config path,
the device tree defines trigger characteristics.
- the same warning, mutatis mutandis, for ACPI-probed GPIO irqchips.
- we introduce the ability to mark certain IRQ lines as "unusable" as
they can be taken by BIOS/firmware, unrouted in silicon and
generally nasty if you use them, and such things. This is put to
good use in the STMPE driver and also in the Cherryview pin control
driver.
- a new "mockup" virtual GPIO device that can be used for testing.
The plan is to add unit tests under tools/* for exercising this
device and verify that the kernel code paths are working as they
should.
- make memory-mapped I/O-drivers depend on HAS_IOMEM. This was
implicit all the time, but when people started building UM with
allyesconfig or allmodconfig it exploded in their face.
- move some stray bits of device tree and ACPI HW description
callbacks down into their respective implementation silo. These
were causing issues when compiling on !HAS_IOMEM as well, so now
eventually UM compiles the GPIOLIB library if it wants to.
New drivers:
- new driver for the Aspeed GPIO front-end companion to the pin
controller merged through the pin control tree.
- new driver for the LP873x PMIC GPIO portions.
- new driver for Technologic Systems' I2C FPGA GPIO such as TS4900,
TS-7970, TS-7990 and TS-4100.
- new driver for the Broadcom BCM63xx series including BCM6338 and
BCM6345.
- new driver for the Intel WhiskeyCove PMIC GPIO.
- new driver for the Allwinner AXP209 PMIC GPIO portions.
- new driver for Diamond Systems 48 line GPIO-MM, another of these
port-mapped I/O expansion cards.
- support the STMicroelectronics STMPE1600 variant in the STMPE
driver.
Driver improvements:
- the STMPE driver now supports rising/falling edge detection
properly for IRQs.
- the PCA954x will now fetch and enable its VCC regulator properly.
- major rework of the PCA953x driver with the goal of eventually
switching it over to use regmap and thus modernize it even more.
- switch the IOP driver to use the generic MMIO GPIO library.
- move the ages old HTC EGPIO (extended GPIO) GPIO expander driver
over to this subsystem from MFD, achieveing some separation of
concerns"
* tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (81 commits)
gpio: add missing static inline
gpio: OF: localize some gpiochip init functions
gpio: acpi: separation of concerns
gpio: OF: separation of concerns
gpio: make memory-mapped drivers depend on HAS_IOMEM
gpio: stmpe: use BIT() macro
gpio: stmpe: forbid unused lines to be mapped as IRQs
mfd/gpio: Move HTC GPIO driver to GPIO subsystem
gpio: MAINTAINERS: Add an entry for GPIO mockup driver
gpio/mockup: add virtual gpio device
gpio: Added zynq specific check for special pins on bank zero
gpio: axp209: Implement get_direction
gpio: aspeed: remove redundant return value check
gpio: loongson1: remove redundant return value check
ARM: omap2: fix missing include
gpio: tc3589x: fix up complaints on unsigned
gpio: tc3589x: add .get_direction() and small cleanup
gpio: f7188x: use gpiochip_get_data instead of container_of
gpio: tps65218: use devm_gpiochip_add_data() for gpio registration
gpio: aspeed: fix return value check in aspeed_gpio_probe()
...
buffers (Thor Thayer)
* Split the memory controller part out of mpc85xx and share it with a
* new Freescale ARM Layerscape driver (York Sun)
* amd64_edac fixes (Yazen Ghannam)
* Misc cleanups, refactoring and fixes all over the place
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pcI8
-----END PGP SIGNATURE-----
Merge tag 'edac_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
"A lot of movement in the EDAC tree this time around, coarse summary
below:
- Altera Arria10 enablement of NAND, DMA, USB, QSPI and SD-MMC FIFO
buffers (Thor Thayer)
- split the memory controller part out of mpc85xx and share it with a
new Freescale ARM Layerscape driver (York Sun)
- amd64_edac fixes (Yazen Ghannam)
- misc cleanups, refactoring and fixes all over the place"
* tag 'edac_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (37 commits)
EDAC, altera: Add IRQ Flags to disable IRQ while handling
EDAC, altera: Correct EDAC IRQ error message
EDAC, amd64: Autoload module using x86_cpu_id
EDAC, sb_edac: Remove NULL pointer check on array pci_tad
EDAC: Remove NO_IRQ from powerpc-only drivers
EDAC, fsl_ddr: Fix error return code in fsl_mc_err_probe()
EDAC, fsl_ddr: Add entry to MAINTAINERS
EDAC: Move Doug Thompson to CREDITS
EDAC, I3000: Orphan driver
EDAC, fsl_ddr: Replace simple_strtoul() with kstrtoul()
EDAC, layerscape: Add Layerscape EDAC support
EDAC, fsl_ddr: Fix IRQ dispose warning when module is removed
EDAC, fsl_ddr: Add support for little endian
EDAC, fsl_ddr: Add missing DDR DRAM types
EDAC, fsl_ddr: Rename macros and names
EDAC, fsl-ddr: Separate FSL DDR driver from MPC85xx
EDAC, mpc85xx: Replace printk() with pr_* format
EDAC, mpc85xx: Drop setting/clearing RFXE bit in HID1
EDAC, altera: Rename MC trigger to common name
EDAC, altera: Rename device trigger to common name
...
Pull irq updates from Thomas Gleixner:
"The irq departement proudly presents:
- A rework of the core infrastructure to optimally spread interrupt
for multiqueue devices. The first version was a bit naive and
failed to take thread siblings and other details into account.
Developed in cooperation with Christoph and Keith.
- Proper delegation of softirqs to ksoftirqd, so if ksoftirqd is
active then no further softirq processsing on interrupt return
happens. Otherwise we try to delegate and still run another batch
of network packets in the irq return path, which then tries to
delegate to ksoftirqd .....
- A proper machine parseable sysfs based alternative for
/proc/interrupts.
- ACPI support for the GICV3-ITS and ARM interrupt remapping
- Two new irq chips from the ARM SoC zoo: STM32-EXTI and MVEBU-PIC
- A new irq chip for the JCore (SuperH)
- The usual pile of small fixlets in core and irqchip drivers"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
softirq: Let ksoftirqd do its job
genirq: Make function __irq_do_set_handler() static
ARM/dts: Add EXTI controller node to stm32f429
ARM/STM32: Select external interrupts controller
drivers/irqchip: Add STM32 external interrupts support
Documentation/dt-bindings: Document STM32 EXTI controller bindings
irqchip/mips-gic: Use for_each_set_bit to iterate over local IRQs
pci/msi: Retrieve affinity for a vector
genirq/affinity: Remove old irq spread infrastructure
genirq/msi: Switch to new irq spreading infrastructure
genirq/affinity: Provide smarter irq spreading infrastructure
genirq/msi: Add cpumask allocation to alloc_msi_entry
genirq: Expose interrupt information through sysfs
irqchip/gicv3-its: Use MADT ITS subtable to do PCI/MSI domain initialization
irqchip/gicv3-its: Factor out PCI-MSI part that might be reused for ACPI
irqchip/gicv3-its: Probe ITS in the ACPI way
irqchip/gicv3-its: Refactor ITS DT init code to prepare for ACPI
irqchip/gicv3-its: Cleanup for ITS domain initialization
PCI/MSI: Setup MSI domain on a per-device basis using IORT ACPI table
ACPI: Add new IORT functions to support MSI domain handling
...
- Add a Kconfig option for ZTE ZX SoC family support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJX25GmAAoJEFBXWFqHsHzOIh4H/30QlDQQyiPzTeKIn0Tfriyj
aL13JVMxCIdGGLN3U1ruZReVwlBMnr14uWsjl7lFT3+VeOSEwyXbCzwn1SKGQ7uh
GQ91KColUy2iFpWnhRCQHPUSUlBUq4R1qR4apP8laaM/xfS7QpG6dghzYcbwnrYG
U51SLecjN234Oca5z7B1kIlOnxSxexEZfPIP2XfT1+ju+NyyU0yjSnLlAAgYVtbW
SNAqrHj4gaZBe7VZB5hfE1ABPVjaXP8f8lkO9ihMHjR5tqEgfgZmayWKdVpR6Ky6
7y0UzUBIuu9WDCvvTqIEXahG3Up+/eeN6lqi4XBlnBGJee+5LBGQ8iyamh5B7CY=
=RDGI
-----END PGP SIGNATURE-----
Merge tag 'zte-soc64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/arm64
Pull "ZTE arm64 SoC changes for 4.9" from Shawn Guo:
- Add a Kconfig option for ZTE ZX SoC family support
* tag 'zte-soc64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: add ZTE ZX SoC family
This patch introduces ARCH_ZX to add the support of the ZTE ZX SoC
family for the arm64 architecture.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
the following:
- collective effort from Florian, Doug and Markus to add the ARCH_BRCMSTB Kconfig
symbol to the ARM64 kernel build, which is purposedly the same as the ARM/Linux
one in order not to update any driver dependencies
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=AjHP
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.9/soc-arm64' of http://github.com/Broadcom/stblinux into next/arm64
Pull "Broadcom soc-arm64 changes for 4.9" from Florian Fainelli:
This pull request contains Broadcom ARM64-based SoC changes for 4.9, please pull
the following:
- collective effort from Florian, Doug and Markus to add the ARCH_BRCMSTB Kconfig
symbol to the ARM64 kernel build, which is purposedly the same as the ARM/Linux
one in order not to update any driver dependencies
* tag 'arm-soc/for-4.9/soc-arm64' of http://github.com/Broadcom/stblinux:
arm64: Add Broadcom Set Top Box Kconfig entry point
- Enable hisilicon SAS and XGE for hip05 and hip06
- Enable drm, powerkey, bluetooth and adv7511/adv7533 for hikey
- Add PINCTRL to HISI platform
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=y80h
-----END PGP SIGNATURE-----
Merge tag 'hisi-defconfig-for-4.9' of git://github.com/hisilicon/linux-hisi into next/arm64
Pull "ARM64: hisilicon: defconfig updates for 4.9" from Wei Xu:
- Enable hisilicon SAS and XGE for hip05 and hip06
- Enable drm, powerkey, bluetooth and adv7511/adv7533 for hikey
- Add PINCTRL to HISI platform
* tag 'hisi-defconfig-for-4.9' of git://github.com/hisilicon/linux-hisi:
Kconfig: ARCH_HISI: Add PINCTRL to HISI platform
arm64: defconfig: enable bluetooth supports as modules
arm64: defconfig: enable CONFIG_INPUT_HISI_POWERKEY for HiKey
arm64: defconfig: Enable HiSilicon kirin drm, adv7533 for HiKey
arm64: defconfig: Enable Hisi SAS and HNS
Add a couple of devices (AGIC, ADMA) on Tegra210 and enable them on
Smaug. Also enable DPAUX on Smaug to allow the I2C bus that shares pads
with the DPAUX to be used to access various audio devices. Furthermore,
enable the XUSB controller on Smaug for USB 3.0 support.
Finally, select PM_GENERIC_DOMAINS for 64-bit Tegra devices to make sure
devices are probed only after their power partitions have been enabled.
-----BEGIN PGP SIGNATURE-----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=RrBi
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.9-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64
Pull "arm64: tegra: Device tree changes for v4.9-rc1" from Thierry Reding:
Add a couple of devices (AGIC, ADMA) on Tegra210 and enable them on
Smaug. Also enable DPAUX on Smaug to allow the I2C bus that shares pads
with the DPAUX to be used to access various audio devices. Furthermore,
enable the XUSB controller on Smaug for USB 3.0 support.
Finally, select PM_GENERIC_DOMAINS for 64-bit Tegra devices to make sure
devices are probed only after their power partitions have been enabled.
* tag 'tegra-for-4.9-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Select PM_GENERIC_DOMAINS
arm64: tegra: Enable XUSB controller on Tegra210 Smaug
arm64: tegra: Add the various audio devices for Tegra210 Smaug
arm64: tegra: Enable DPAUX for Tegra210 Smaug
arm64: tegra: Add ACONNECT, ADMA and AGIC nodes Tegra210 Smaug
arm64: tegra: Add SOR power-domain for Tegra210
arm64: tegra: Add ADMA node for Tegra210
arm64: tegra: Add AGIC node for Tegra210
arm64: tegra: Drop clock and reset names for XUSB powergates
arm64: tegra: Simplify Tegra210 GPIO compatible value
Enable PM_GENERIC_DOMAINS for 64-bit Tegra devices. This is required to
ensure that devices dependent upon a particular power domain are probed
only after that power domain has been powered up.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Things won't work if PINCTRL isn't enabled,
so make sure to explicitly set it rather
then betting that we have some other platform
configed in which selects it.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The pinctrl driver is essential for the Allwinner SoCs to work.
Add the driver's config symbol to the Kconfig entry to always compile
it in. We can't use the arm approach to make the _driver's_ Kconfig
symbol def_bool, because we lack the MACH_* symbols in arm64.
That line was in the original pinctrl driver patch, but got removed
to avoid the dependency on the Kconfig patch [1].
Also add the general PINCTRL symbol, which isn't selected automatically
for the same reason.
Reported-by: Jeroen Dekien <dekien@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
[1]: http://lists.infradead.org/pipermail/linux-arm-kernel/2016-March/414086.html
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
HAVE_CLK is select'ed by CLKDEV_LOOKUP, which is select'ed by
COMMON_CLK, which is select'ed by ARM64. No sub-architecture
needs to select HAVE_CLK explicitly.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Even when PCI is disabled, ARCH_HISI selects HISILICON_IRQ_MBIGEN
triggerring the following config warning:
warning: (ARM64 && HISILICON_IRQ_MBIGEN) selects ARM_GIC_V3_ITS which
has unmet direct dependencies (PCI && PCI_MSI)
This patch makes selection of HISILICON_IRQ_MBIGEN conditional on PCI.
Cc: Ma Jun <majun258@huawei.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Even when PCI is disabled, ARCH_ALPINE selects ALPINE_MSI triggerring
the following config warning:
warning: (ARCH_ALPINE) selects ALPINE_MSI which has unmet direct
dependencies (PCI)
This patch makes selection of ALPINE_MSI conditional on PCI.
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add an ARCH_BRCMSTB Kconfig symbol which allows us not to update the
dependencies for all STB-related drivers. Select BRCMSTB_L2_IRQ and
GENERIC_IRQ_CHIP which are required for proper functioning.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
This replaces:
- "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can
now be selected directly.
- "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB
is now selectable by everyone, so we need not declare our
intent to select it.
Cc: Michael Büsch <m@bues.ch>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The AmLogic clock controller code is used by both arm and arm64
architectures. Explicitly select the core code for all Meson (arm64)
builds, and also select the GXBB driver, since that's the way arm64 does
things.
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Eric updates the bcm2836 interrupt controller driver not to rely on ARM/Linux specific functions
in preparation for using it on ARM64
- Eric also adds a Kconfig entry for the BCM2835 Raspberry Pi family in the ARM64 Kconfig.platforms
file
- Eric cherry picked a patch from Alexander Graf with Acks from ARM64 maintainers to support different
DMA and bus offsets, required for the Raspberry Pi 3 SoC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qrTS
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.8/soc-arm64-part2' of http://github.com/Broadcom/stblinux into next/arm64
Merge "Broadcom ARM64-based SoC changes for 4.8 second part" from Florian Fainelli:
- Eric updates the bcm2836 interrupt controller driver not to rely on ARM/Linux specific functions
in preparation for using it on ARM64
- Eric also adds a Kconfig entry for the BCM2835 Raspberry Pi family in the ARM64 Kconfig.platforms
file
- Eric cherry picked a patch from Alexander Graf with Acks from ARM64 maintainers to support different
DMA and bus offsets, required for the Raspberry Pi 3 SoC
* tag 'arm-soc/for-4.8/soc-arm64-part2' of http://github.com/Broadcom/stblinux:
arm64: Add platform selection for BCM2835.
arm64: Allow for different DMA and CPU bus offsets
irqchip: bcm2835: Avoid arch/arm-specific handle_IRQ
enable Armada 3700 clock drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAld6ykAACgkQCwYYjhRyO9Wo8ACdH6kYBKYuaivu3ggVBoSle+01
5noAn13h+iScUld+CAn0UVktOjd7Yplp
=sjV8
-----END PGP SIGNATURE-----
Merge tag 'mvebu-arm64-4.8-1' of git://git.infradead.org/linux-mvebu into next/arm64
Merge "mvebu arm64 for 4.8" from Gregory CLEMENT:
enable Armada 3700 clock drivers
* tag 'mvebu-arm64-4.8-1' of git://git.infradead.org/linux-mvebu:
arm64: marvell: enable Armada 3700 clock drivers
Basic support for the Gen 3 R-Car M3-W SoC.
Based on work for the r8a7795 and r8a7796 SoCs by
Takeshi Kihara, Dirk Behme and Geert Uytterhoeven.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
arm64 port.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Rdgt
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pK2X
-----END PGP SIGNATURE-----
Merge tag 'bcm2835-arm64-next-2016-07-03' into soc-arm64/next
This pull request brings in the build support for the Raspberry Pi arm64
port. This has an external dependency on Jason Cooper's irqchip/bcm
branch, it is a stable branch based on v4.7-rc1, and it has been in
-next for a couple of weeks.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The Linux AMBA bus framework probes the peripheral IDs when adding the
AMBA devices very early on the boot. Generally they are on APB bus and
just require APB clocks to be on even when most of the core logic of the
IP is powered down.
However on Juno, the entire debugsys domain needs to be ON to access
even the coresight components' CID/PID registers and hence broken by
design. Accessing those while debugsys power domain is off will lead to
the bridge stalling the transactions instead of returning the slave error.
Further, the AMBA framework can't deal with !CONFIG_PM_GENERIC_DOMAINS
case: it ignores the error and proceeds to access the device region.
It was suggested to always enable CONFIG_PM{,_GENERIC_DOMAINS} in order
to handle above explained scenario.
Cc: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
- Kamlakant updates the Broadcom Vulcan Kconfig entry with GPIOLIB to enable
GPIO on these platforms
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MnRp
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.8/soc-arm64' of http://github.com/Broadcom/stblinux into next/arm64
This pull request contains SoC changes for Broadcom ARM64-based SoCs:
- Kamlakant updates the Broadcom Vulcan Kconfig entry with GPIOLIB to enable
GPIO on these platforms
* tag 'arm-soc/for-4.8/soc-arm64' of http://github.com/Broadcom/stblinux:
arm64: vulcan: enable GPIOLIB in Kconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
[ kraxel: copy some selects from arm to arm64 ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Select the Meson pin controller driver also for the AArch64 Meson
platform.
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Recently some Exynos drivers were moved from arm/mach-exynos to
drivers/soc. Building the directory depends on SOC_SAMSUNG Kconfig
option so we want it also on ARMv8 platforms, even though none of the
drivers support ARMv8 SoCs yet.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
One new platform gets added this time: The Cortex-A53 based LG Electronics
LG1K platform used in digital TVs.
The other changes are mostly smaller updates to the defconfig files, to
enable additional platform specific drivers, as they get merged through
the subsystem trees.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ISkf
-----END PGP SIGNATURE-----
Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC 64-bit changes from Arnd Bergmann:
"One new platform gets added this time: The Cortex-A53 based LG
Electronics LG1K platform used in digital TVs.
The other changes are mostly smaller updates to the defconfig files,
to enable additional platform specific drivers, as they get merged
through the subsystem trees"
* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: configs: add options useful for Armada 7K/8K support
arm64: defconfig: Add Juno SATA controller
arm64: defconfig: enable freescale/nxp config options
arm64: defconfig: enable 48-bit virtual addresses
arm64: defconfig: cleanup the defconfig
MAINTAINERS: update entry for Marvell ARM platform maintainers
arm64: marvell: enable AP806 and CP110 syscon driver
arm64: Kconfig: select sp804 timer for ARCH_HISI
arm64: defconfig: enable configs for WLAN and TI WL1835 as modules
arm64: defconfig: enable several common USB network adapters
arm64: defconfig: add CONFIG_SPI_SPIDEV as module
arm64: defconfig: Enable the PMIC and regulator for Hi6220 and 96boards HiKey
arm64: defconfig: Add Renesas R-Car USB 3.0 driver support
MAINTAINERS: add Chanho Min as ARM/LG1K maintainer
arm64: defconfig: enable ARCH_LG1K
arm64: add Kconfig entry for LG1K SoC family
arm64: defconfig: Enable PL330 DMA controller
arm64: defconfig: enable basic boot for Amlogic meson
Arnd Bergmann