Pull sparc updates from David Miller:
"A host of mall cleanups and adjustments that have accumulated while I
was away, nothing major"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: (26 commits)
sparc: make xchg() into a statement expression
sparc64: Use arch_validate_flags() to validate ADI flag
sparc32: Fix comparing pointer to 0 coccicheck warning
sparc: fix led.c driver when PROC_FS is not enabled
sparc: Fix handling of page table constructor failure
sparc64: only select COMPAT_BINFMT_ELF if BINFMT_ELF is set
tty: hvcs: Drop unnecessary if block
tty: vcc: Drop unnecessary if block
tty: vcc: Drop impossible to hit WARN_ON
sparc: sparc64_defconfig: add necessary configs for qemu
sparc64: switch defconfig from the legacy ide driver to libata
sparc32: Preserve clone syscall flags argument for restarts due to signals
sparc32: Limit memblock allocation to low memory
sparc: Replace test_ti_thread_flag() with test_tsk_thread_flag()
sbus: char: Remove meaningless jump label out_free
sparc32: signal: Fix stack trampoline for RT signals
sparc: remove SA_STATIC_ALLOC macro definition
sparc: use for_each_child_of_node() macro
sparc: Use fallthrough pseudo-keyword
sparc32: srmmu: improve type safety of __nocache_fix()
...
~0U is -1, not 1
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Fixes: fdf8bee96f "sparc64: propagate the calling convention changes down to __csum_partial_copy_...()"
X-brown-paperbag: yes
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... and get rid of zeroing the target, etc. on fault.
All exception handlers merge into one; moreover, since we are not
calling lookup_fault() anymore, we don't need the magic with passing
arguments for it from the page fault handler.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It's always 0. Note that we theoretically could use ~0U as well -
result will be the same modulo 0xffff, _if_ the damn thing did the
right thing for any value of initial sum; later we'll make use of
that when convenient.
However, unlike csum_and_copy_..._user(), there are instances that
did not work for arbitrary initial sums; c6x is one such.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Back in 2.1.29 the clear_user() guts (__bzero()) had been merged
with memset(). Unfortunately, while all exception handlers had been
copied, one of the exception table entries got lost. As the result,
clear_user() starting at 128*n bytes before the end of page and
spanning between 8 and 127 bytes into the next page would oops when
the second page is unmapped. It's trivial to reproduce - all
it takes is
main()
{
int fd = open("/dev/zero", O_RDONLY);
char *p = mmap(NULL, 16384, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANON, -1, 0);
munmap(p + 8192, 8192);
read(fd, p + 8192 - 128, 192);
}
which had been oopsing since March 1997. Says something about
the quality of test coverage... ;-/ And while today sparc32 port
is nearly dead, back in '97 it had been very much alive; in fact,
sparc64 had only been in mainline for 3 months by that point...
Cc: stable@kernel.org
Fixes: v2.1.29
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.
import sys
import re
if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)
hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False
with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.
Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
"git diff" says:
\ No newline at end of file
after modifying the file.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
We already provide the LGPL-2.0 text in LICENSES/preferred/LGPL-2.0,
so there is no need for this additional copy here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Based on 1 normalized pattern(s):
gnu cc is free software you can redistribute it and or modify it
under the terms of the gnu general public license as published by
the free software foundation either version 2 or at your option any
later version gnu cc is distributed in the hope that it will be
useful but without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details you should have received a
copy of the gnu general public license along with gnu cc see the
file copying if not write to the free software foundation 59 temple
place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.940713800@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While __atomic_add_unless() was originally intended as a building-block
for atomic_add_unless(), it's now used in a number of places around the
kernel. It's the only common atomic operation named __atomic*(), rather
than atomic_*(), and for consistency it would be better named
atomic_fetch_add_unless().
This lack of consistency is slightly confusing, and gets in the way of
scripting atomics. Given that, let's clean things up and promote it to
an official part of the atomics API, in the form of
atomic_fetch_add_unless().
This patch converts definitions and invocations over to the new name,
including the instrumented version, using the following script:
----
git grep -w __atomic_add_unless | while read line; do
sed -i '{s/\<__atomic_add_unless\>/atomic_fetch_add_unless/}' "${line%%:*}";
done
git grep -w __arch_atomic_add_unless | while read line; do
sed -i '{s/\<__arch_atomic_add_unless\>/arch_atomic_fetch_add_unless/}' "${line%%:*}";
done
----
Note that we do not have atomic{64,_long}_fetch_add_unless(), which will
be introduced by later patches.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20180621121321.4761-2-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit v4.12-rc4-1-g9289ea7f952b introduced a mistake that made the
64-bit hweight stub call the 16-bit hweight function.
Fixes: 9289ea7f95 ("sparc64: Use indirect calls in hamming weight stubs")
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we don't put the NG4fls.o object into the same part of
the link as the generic sparc64 objects for fls() and __fls()
then the relocation in the branch we use for patching will
not fit.
Move NG4fls.o into lib-y to fix this problem.
Fixes: 46ad8d2d22 ("sparc64: Use sparc optimized fls and __fls for T4 and above")
Signed-off-by: David S. Miller <davem@davemloft.net>
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Pull sparc updates from David Miller:
1) Add missing cmpxchg64() for 32-bit sparc.
2) Timer conversions from Allen Pais and Kees Cook.
3) vDSO support, from Nagarathnam Muthusamy.
4) Fix sparc64 huge page table walks based upon bug report by Al Viro,
from Nitin Gupta.
5) Optimized fls() for T4 and above, from Vijay Kumar.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Fix page table walk for PUD hugepages
sparc64: Convert timers to user timer_setup()
sparc64: convert mdesc_handle.refcnt from atomic_t to refcount_t
sparc/led: Convert timers to use timer_setup()
sparc64: Use sparc optimized fls and __fls for T4 and above
sparc64: SPARC optimized __fls function
sparc64: SPARC optimized fls function
sparc64: Define SPARC default __fls function
sparc64: Define SPARC default fls function
vDSO for sparc
sparc32: Add cmpxchg64().
sbus: char: Move D7S_MINOR to include/linux/miscdevice.h
sparc: time: Remove unneeded linux/miscdevice.h include
sparc64: mmu_context: Add missing include files
For T4 and above, patch fls and __fls functions
at the boot time to use lzcnt instruction.
Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Defined SPARC optimized __fls using lzcnt opcode.
Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Defined SPARC optimized fls using lzcnt opcode.
Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__fls will now require a boot time patching on T4 and above.
Redefining it under arch/sparc/lib.
Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fls will now require a boot time patching on T4 and above.
Redefining it under arch/sparc/lib.
Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
%g4 and %g5 are fixed registers used by the kernel for the thread
pointer and the per-cpu offset. Use %o4 and %g7 instead.
Diagnosis by Anthony Yznaga.
Fixes: 1b4af13ff2 ("sparc64: Add __multi3 for gcc 7.x and later.")
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
New algorithm that takes advantage of the M7/M8 block init store
ASI, ie, overlapping pipelines and miss buffer filling.
Full details in code comments.
Signed-off-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename exception handlers to memcpy_xxx as these
are going to be used by new memcpy routines and these
handlers are not exclusive to NG4memcpy anymore.
Signed-off-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Separate the exception handlers from NG4memcpy so that it can be
used with new memcpy routines. Make a separate file for all these handlers.
Signed-off-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update comments about the range the different
parts of the code copies, the original comments were wrong.
Introduce a few descriptive labels too.
No functional changes.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mikael Pettersson reported that some test programs in the strace-4.18
testsuite cause an OOPS.
After some debugging it turns out that garbage values are returned
when an exception occurs, causing the fixup memset() to be run with
bogus arguments.
The problem is that two of the exception handler stubs write the
successfully copied length into the wrong register.
Fixes: ee841d0aff ("sparc64: Convert U3copy_{from,to}_user to accurate exception reporting.")
Reported-by: Mikael Pettersson <mikpelinux@gmail.com>
Tested-by: Mikael Pettersson <mikpelinux@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull sparc fixes from David Miller:
- Fix symbol version generation for assembler on sparc, from
Nagarathnam Muthusamy.
- Fix compound page handling in gup_huge_pmd(), from Nitin Gupta.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Fix gup_huge_pmd
Adding the type of exported symbols
sed regex in Makefile.build requires line break between exported symbols
Adding asm-prototypes.h for genksyms to generate crc
Thin archives migration by Nicholas Piggin.
THIN_ARCHIVES has been available for a while as an optional feature
only for PowerPC architecture, but we do not need two different
intermediate-artifact schemes.
Using thin archives instead of conventional incremental linking has
various advantages:
- save disk space for builds
- speed-up building a little
- fix some link issues (for example, allyesconfig on ARM) due to
more flexibility for the final linking
- work better with dead code elimination we are planning
As discussed before, this migration has been done unconditionally
so that any problems caused by this will show up with "git bisect".
With testing with 0-day and linux-next, some architectures actually
showed up problems, but they were trivial and all fixed now.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=PAWi
-----END PGP SIGNATURE-----
Merge tag 'kbuild-thinar-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild thin archives updates from Masahiro Yamada:
"Thin archives migration by Nicholas Piggin.
THIN_ARCHIVES has been available for a while as an optional feature
only for PowerPC architecture, but we do not need two different
intermediate-artifact schemes.
Using thin archives instead of conventional incremental linking has
various advantages:
- save disk space for builds
- speed-up building a little
- fix some link issues (for example, allyesconfig on ARM) due to more
flexibility for the final linking
- work better with dead code elimination we are planning
As discussed before, this migration has been done unconditionally so
that any problems caused by this will show up with "git bisect".
With testing with 0-day and linux-next, some architectures actually
showed up problems, but they were trivial and all fixed now"
* tag 'kbuild-thinar-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
tile: remove unneeded extra-y in Makefile
kbuild: thin archives make default for all archs
x86/um: thin archives build fix
tile: thin archives fix linking
ia64: thin archives fix linking
sh: thin archives fix linking
kbuild: handle libs-y archives separately from built-in.o archives
kbuild: thin archives use P option to ar
kbuild: thin archives final link close --whole-archives option
ia64: remove unneeded extra-y in Makefile.gate
tile: fix dependency and .*.cmd inclusion for incremental build
sparc64: Use indirect calls in hamming weight stubs
Otherwise, depending upon link order, the branch relocation
limits could be exceeded.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Missing symbol type for few functions prevents genksyms from generating
symbol versions for those functions. This patch fixes them.
Signed-off-by: Nagarathnam Muthusamy <nagarathnam.muthusamy@oracle.com>
Reviewed-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following regex in Makefile.build matches only one ___EXPORT_SYMBOL per line.
sed
's/.*___EXPORT_SYMBOL[[:space:]]*\([a-zA-Z0-9_]*\)[[:space:]]*,.*/EXPORT_SYMBOL(\1);/'
ATOMIC_OPS macro in atomic_64.S expands multiple symbols in same line hence
version generation is done only for the last matched symbol. This patch adds
new line between the symbol expansions.
Signed-off-by: Nagarathnam Muthusamy <nagarathnam.muthusamy@oracle.com>
Reviewed-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When any of the functions contained in NGbzero.S and GENbzero.S
vector through *bzero_from_clear_user, we may end up taking a
fault when executing one of the store alternate address space
instructions. If this happens, the exception handler does not
restore the %asi register.
This commit fixes the issue by introducing a new exception
handler that ensures the %asi register is restored when
a fault is handled.
Orabug: 25577560
Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com>
Reviewed-by: Rob Gardner <rob.gardner@oracle.com>
Reviewed-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull uaccess unification updates from Al Viro:
"This is the uaccess unification pile. It's _not_ the end of uaccess
work, but the next batch of that will go into the next cycle. This one
mostly takes copy_from_user() and friends out of arch/* and gets the
zero-padding behaviour in sync for all architectures.
Dealing with the nocache/writethrough mess is for the next cycle;
fortunately, that's x86-only. Same for cleanups in iov_iter.c (I am
sold on access_ok() in there, BTW; just not in this pile), same for
reducing __copy_... callsites, strn*... stuff, etc. - there will be a
pile about as large as this one in the next merge window.
This one sat in -next for weeks. -3KLoC"
* 'work.uaccess' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (96 commits)
HAVE_ARCH_HARDENED_USERCOPY is unconditional now
CONFIG_ARCH_HAS_RAW_COPY_USER is unconditional now
m32r: switch to RAW_COPY_USER
hexagon: switch to RAW_COPY_USER
microblaze: switch to RAW_COPY_USER
get rid of padding, switch to RAW_COPY_USER
ia64: get rid of copy_in_user()
ia64: sanitize __access_ok()
ia64: get rid of 'segment' argument of __do_{get,put}_user()
ia64: get rid of 'segment' argument of __{get,put}_user_check()
ia64: add extable.h
powerpc: get rid of zeroing, switch to RAW_COPY_USER
esas2r: don't open-code memdup_user()
alpha: fix stack smashing in old_adjtimex(2)
don't open-code kernel_setsockopt()
mips: switch to RAW_COPY_USER
mips: get rid of tail-zeroing in primitives
mips: make copy_from_user() zero tail explicitly
mips: clean and reorder the forest of macros...
mips: consolidate __invoke_... wrappers
...
Avoid un-intended DCTI Couples. Use of DCTI couples is deprecated.
Also address the "Programming Note" for optimal performance.
Here is the complete text from Oracle SPARC Architecture Specs.
6.3.4.7 DCTI Couples
"A delayed control transfer instruction (DCTI) in the delay slot of
another DCTI is referred to as a “DCTI couple”. The use of DCTI couples
is deprecated in the Oracle SPARC Architecture; no new software should
place a DCTI in the delay slot of another DCTI, because on future Oracle
SPARC Architecture implementations DCTI couples may execute either
slowly or differently than the programmer assumes it will.
SPARC V8 and SPARC V9 Compatibility Note
The SPARC V8 architecture left behavior undefined for a DCTI couple. The
SPARC V9 architecture defined behavior in that case, but as of
UltraSPARC Architecture 2005, use of DCTI couples was deprecated.
Software should not expect high performance from DCTI couples, and
performance of DCTI couples should be expected to decline further in
future processors.
Programming Note
As noted in TABLE 6-5 on page 115, an annulled branch-always
(branch-always with a = 1) instruction is not architecturally a DCTI.
However, since not all implementations make that distinction, for
optimal performance, a DCTI should not be placed in the instruction word
immediately following an annulled branch-always instruction (BA,A or
BPA,A)."
Signed-off-by: Babu Moger <babu.moger@oracle.com>
Reviewed-by: Rob Gardner <rob.gardner@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that all of the user copy routines are converted to return
accurate residual lengths when an exception occurs, we no longer need
the broken fixup routines.
Signed-off-by: David S. Miller <davem@davemloft.net>
Report the exact number of bytes which have not been successfully
copied when an exception occurs, using the running remaining length.
Signed-off-by: David S. Miller <davem@davemloft.net>
Report the exact number of bytes which have not been successfully
copied when an exception occurs, using the running remaining length.
Signed-off-by: David S. Miller <davem@davemloft.net>
Report the exact number of bytes which have not been successfully
copied when an exception occurs, using the running remaining length.
Signed-off-by: David S. Miller <davem@davemloft.net>
Report the exact number of bytes which have not been successfully
copied when an exception occurs, using the running remaining length.
Signed-off-by: David S. Miller <davem@davemloft.net>
Report the exact number of bytes which have not been successfully
copied when an exception occurs, using the running remaining length.
Signed-off-by: David S. Miller <davem@davemloft.net>
Report the exact number of bytes which have not been successfully
copied when an exception occurs, using the running remaining length.
Signed-off-by: David S. Miller <davem@davemloft.net>
Report the exact number of bytes which have not been successfully
copied when an exception occurs, using the running remaining length.
Signed-off-by: David S. Miller <davem@davemloft.net>
The fixup helper function mechanism for handling user copy fault
handling is not %100 accurrate, and can never be made so.
We are going to transition the code to return the running return
return length, which is always kept track in one or more registers
of each of these routines.
In order to convert them one by one, we have to allow the existing
behavior to continue functioning.
Therefore make all the copy code that wants the fixup helper to be
used return negative one.
After all of the user copy routines have been converted, this logic
and the fixup helpers themselves can be removed completely.
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds