Use DEVICE_ATTR_RW() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Message-Id: <20210524115131.46288-1-yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Jack must be connected before reporting button events and
if the jack is disconnected button release must be reported
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-Id: <20210525090822.64577-4-tanureal@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Add support for 2.4MHz clock source
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-Id: <20210525090822.64577-3-tanureal@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Add support for 24bits, 2 channels, 48k Sample rate bit clock
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-Id: <20210525090822.64577-2-tanureal@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
The 16 Bits, 2 channels, 48K sample rate use case needs
to configure a safer pll_divout during the start of PLL
After 800us from the start of PLL the correct pll_divout
can be set
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-Id: <20210525090822.64577-1-tanureal@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
A collection of fixes that have come in since the merge window, mainly
device specific things. The fixes to the generic cards from
Morimoto-san are handling regressions that were introduced in the merge
window on at least the Kontron sl28-var3-ads2.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmCraeoACgkQJNaLcl1U
h9BuVgf+Ith7351Fz+Jd1Y8e0rdVXuR4qVrkwm6u93/PRmFsL8DDWfURiHPuXJ+W
7NgsyreQEDLJYom8qloda/Lva2+FB0BHHkzUVLiZ7mDdbYq9Dush0QLLnOSP4p3O
GeeFJeK4EkeGHHFBbFllJ6gVB9xiokEcghXz1a+PkNMkYuQpAswlvhHxlIfEk1Bv
p1DBcM3gfT+3kfGynyz9A2O01zSd34Eg7tQuMqObxwFwpWY9mzrlYaPLdLF7Vtgc
JyQVvjTMaUZtiN/zGUFyXxAboTGWIFlPJKvHLHCiKvivSveXamziasieUwDU/cBL
X5SuIh883CghMhp8Dtx39zpcuiwEZQ==
=sQPM
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.13-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.13
A collection of fixes that have come in since the merge window, mainly
device specific things. The fixes to the generic cards from
Morimoto-san are handling regressions that were introduced in the merge
window on at least the Kontron sl28-var3-ads2.
NXP's TFA98xx (now part of Goodix) are fairly popular speaker amplifiers
used in many smartphones and tablets. Most of them are sold as "smart
amplifiers" with built-in "CoolFlux DSP" that is used for volume control,
plus a "sophisticated speaker-boost and protection algorithm".
Unfortunately, they are also almost entirely undocumented. The short
datasheets (e.g. [1] for TFA9897) describe the available features,
but do not provide any information about the registers or how to use
the "CoolFlux DSP".
The amplifiers are most often configured through proprietary userspace
libraries. There are also some (rather complex) kernel drivers (e.g. [2])
but even those rely on obscure firmware blobs for configuration (so-called
"containers"). They seem to contain different "profiles" with tuned speaker
settings, sample rates and volume steps (which would be better exposed
as separate ALSA mixers).
The format of the firmware files seems to have changed a lot over the time,
so it's not even possible to simply re-use the firmware originally provided
by the vendor.
Overall, it seems close to impossible to develop a proper mainline driver
for these amplifiers that could make proper use of the built-in DSP.
This commit implements a compromise: At least the TFA1 family of the
TFA98xx amplifiers (usually called TFA989x) provide a way to *bypass*
the DSP using a special register sequence. The register sequence can be
found in similar variations in the kernel drivers from lots of vendors
e.g. in [3] and was probably mainly used for factory testing.
With the DSP bypassed, the amplifier acts mostly like a dumb standard
speaker amplifier, without (hardware) volume control. However, the setup
is much simpler and it works without any obscure firmware.
This driver implements the DSP bypass combined with chip-specific
initialization sequences adapted from [2]. Only TFA9895 is supported in
this initial commit. Except for the lack of volume control I can not hear
any difference with or without the DSP, it works just fine.
This driver allows the speaker to work on mainline Linux running on the
Samsung Galaxy A3/A5 (2015) [TFA9895] and Alcatel Idol 3 [TFA9897].
TFA9897 support will be added in separate patch set later.
[1]: https://product.goodix.com/en/docview/TFA9897%20SDS_Rev.3.1?objectId=47&objectType=document&version=78
[2]: https://source.codeaurora.org/external/mas/tfa98xx
[3]: 57b5050e34/sound/soc/codecs/tfa98xx.c (L1422-L1462)
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210513104129.36583-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
This error path returns zero (success) but it should return -EINVAL.
Fixes: 3333cb7187 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/YKXuyGEzhPT35R3G@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the missing clk_disable_unprepare() before return
from rk3328_platform_probe() in the error handling case.
Fixes: c32759035a ("ASoC: rockchip: support ACODEC for rk3328")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210518075847.1116983-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs43130_probe() does not do any valid error checking of things it
initializes, OR what it does, it does not unwind properly if there are
errors.
Fix this up by moving the sysfs files to an attribute group so the
driver core will correctly add/remove them all at once and handle errors
with them, and correctly check for creating a new workqueue and
unwinding if that fails.
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-58-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit a2be42f18d.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original patch here is not correct, sysfs files that were created
are not unwound.
Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-57-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check for return value from various snd_soc_dapm_* calls, as many of
them can return errors and this should be handled. Also, reintroduce
the allocation failure check for rt5645->eq_param as well. Make all
areas where return values are checked lead to the end of the function
in the case of an error. Finally, introduce a comment explaining how
resources here are actually eventually cleaned up by the caller.
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210503115736.2104747-56-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 51dd97d1df.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
Lots of things seem to be still allocated here and must be properly
cleaned up if an error happens here.
Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-55-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Char pointer (cp) passed to tty_ldisc_ops::receive_buf{,2} is const.
There is no reason for flag pointer (fp) not to be too. So switch it in
the definition and all uses.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@reisers.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20210505091928.22010-12-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With commit 312c004d36 ("[PATCH] driver core: replace "hotplug" by
"uevent"") already in the tree over a decade, update the name of
FW_ACTION defines to follow semantics, and reflect what the defines are
really meant for, i.e. whether or not generate user space event.
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210425020024.28057-1-shawn.guo@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
HSBIAS_SENSE_EN configures HSBIAS output current sense through
the external 2.21-k resistor. HSBIAS_SENSE is hardware feature to reduce
the potential pop noise during the headset plug out slowly. But on some
platforms ESD voltage will affect it causing test to fail, especially
with CTIA headset type. For different hardware setups, a designer might
want to tweak default behavior.
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511145220.125760-1-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We want all wm_adsp clients to use the wm_adsp.h header as they
shouldn't need to include internal sub-headers.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511171514.270219-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The callback structures and memory region type table can be marked as
const as they will not change during use.
Fix checkpatch warning against wm_adsp_find_region function by moving
const keyword to form the 'static const struct' pattern.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511171459.270169-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixup a needlessly initialised variable and an unchecked return
value.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511175718.15416-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This device requires single register transactions, this will
definely cause problems with the new device ID parsing which uses
regmap_bulk_read but might also show up in the cache sync sometimes.
Add the missing flags to the regmap_config.
Fixes: 283160f141 ("ASoC: cs35l32: Minor error paths fixups")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511175718.15416-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This device requires single register transactions, this will
definely cause problems with the new device ID parsing which uses
regmap_bulk_read but might also show up in the cache sync sometimes.
Add the missing flags to the regmap_config.
Fixes: 8cb9b00163 ("ASoC: cs35l34: Minor error paths fixups")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511175718.15416-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This device requires single register transactions, this will
definely cause problems with the new device ID parsing which uses
regmap_bulk_read but might also show up in the cache sync sometimes.
Add the missing flags to the regmap_config.
Fixes: 26495252fe ("ASoC: cs42l73: Minor error paths fixups")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511175718.15416-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This device requires single register transactions, this will
definely cause problems with the new device ID parsing which
uses regmap_bulk_read but might also show up in the cache sync
sometimes. Add the missing flags to the regmap_config.
Fixes: 4fc81bc88a ("ASoC: cs53l30: Minor error paths fixups")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511175718.15416-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1620789145-14936-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs42l42 does not support standard burst transfers so the use_single_read
and use_single_write flags must be set in the regmap config.
Because of this bug, the patch:
commit 0a0eb567e1 ("ASoC: cs42l42: Minor error paths fixups")
broke cs42l42 probe() because without the use_single_* flags it causes
regmap to issue a burst read.
However, the missing use_single_* could cause problems anyway because the
regmap cache can attempt burst transfers if these flags are not set.
Fixes: 2c394ca796 ("ASoC: Add support for CS42L42 codec")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511132855.27159-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixup a needlessly initialised variable and an unchecked return
value.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511101051.17726-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixup a needlessly initialised variable and an unchecked return value.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511101051.17726-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre requested I have a look at some cppcheck warnings in the cs42l42
driver, since it is reassigning the ret variable without ever checking
the result. Looking a bit more broadly this happens in quite a few
legacy Cirrus parts, as they all use the same process to read the ID,
factor out a small helper so they can all share the same code. Whilst
in there fix up a couple of other trivial error path issues as well.
Thanks,
Charles
Charles Keepax (10):
ASoC: cirrus: Add helper function for reading the device ID
ASoC: cs35l32: Minor error paths fixups
ASoC: cs35l33: Minor error paths fixups
ASoC: cs35l34: Minor error paths fixups
ASoC: cs35l35: Minor error paths fixups
ASoC: cs35l35: Correct errata handling
ASoC: cs42l42: Minor error paths fixups
ASoC: cs42l73: Minor error paths fixups
ASoC: cs43130: Minor error paths fixups
ASoC: cs53l30: Minor error paths fixups
sound/soc/codecs/cirrus_legacy.h | 21 +++++++++++++++++++++
sound/soc/codecs/cs35l32.c | 34 ++++++++++++++++++----------------
sound/soc/codecs/cs35l33.c | 15 +++++++++------
sound/soc/codecs/cs35l34.c | 39 ++++++++++++++++++++++-----------------
sound/soc/codecs/cs35l35.c | 21 ++++++++++-----------
sound/soc/codecs/cs35l35.h | 1 +
sound/soc/codecs/cs42l42.c | 18 ++++++++----------
sound/soc/codecs/cs42l73.c | 30 +++++++++++++++++-------------
sound/soc/codecs/cs43130.c | 31 +++++++++++++++++++------------
sound/soc/codecs/cs53l30.c | 22 +++++++++++-----------
10 files changed, 136 insertions(+), 96 deletions(-)
create mode 100644 sound/soc/codecs/cirrus_legacy.h
--
2.11.0
Correct some unchecked re-allocations of ret whilst reading the device
ID and ensure the hardware state is returned to off on the error
paths.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210510131357.17170-11-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct some unchecked re-allocations of ret whilst reading the device
ID and ensure the hardware state is returned to off on the error
paths.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210510131357.17170-10-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct some unchecked re-allocations of ret whilst reading the device
ID and ensure the hardware state is returned to off on the error
paths.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210510131357.17170-9-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct some unchecked re-allocations of ret whilst reading the device
ID and ensure the hardware state is returned to off on the error
paths.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210510131357.17170-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the check of errata_chk will always evaluate to false since
the values tested don't come under the mask used. A shift of the field
is missing, add this. Also there is an error in the values tested, they
don't match the comment and the value 0x3 is not a valid value for the
field in question. Update the value to match the comment.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210510131357.17170-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct some unchecked re-allocations of ret whilst reading the device
ID and ensure the hardware state is returned to off on the error
paths.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210510131357.17170-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct some unchecked re-allocations of ret whilst reading the device
ID and ensure the hardware state is returned to off on the error
paths.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210510131357.17170-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct some unchecked re-allocations of ret whilst reading the device
ID and ensure the hardware state is returned to off on the error
paths.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210510131357.17170-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct some unchecked re-allocations of ret whilst reading the device
ID and ensure the hardware state is returned to off on the error
paths.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210510131357.17170-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Many of the older Cirrus devices share very similar code for reading the
device ID, and frequently this code is generating cppcheck warnings such
as:
sound/soc/codecs/cs42l42.c:1886:6: style: Variable 'ret' is reassigned
a value before the old one has been used. [redundantAssignment]
ret = regmap_read(cs42l42->regmap, CS42L42_DEVID_CD, ®);
Add a small helper function that older Cirrus devices can use to read
the device ID, which should help correct these issues.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210510131357.17170-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the device_property APIs so that the code will work on devicetree
and ACPI systems.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210426155303.853236-2-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the internal jack creation by set_jack call, so users can map
buttons in their machine driver
Also only enable jack detection IRQ after set_jack call
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210426155303.853236-1-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Let's implement a remove callback for this driver that's similar to the
shutdown hook, but also disables the regulators before they're put by
devm code.
Cc: Jairaj Arava <jairaj.arava@intel.com>
Cc: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
Cc: Shuming Fan <shumingf@realtek.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210508075151.1626903-2-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We cancel the work queues, and reset the device on shutdown, but the irq
isn't disabled so the work queues could be queued again. Let's disable
the irq during shutdown so that we don't have to worry about this device
trying to do anything anymore. This fixes a problem seen where the i2c
bus is shutdown at reboot but this device irq still comes in and tries
to make another i2c transaction when the bus doesn't work.
Cc: Jairaj Arava <jairaj.arava@intel.com>
Cc: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
Cc: Shuming Fan <shumingf@realtek.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Fixes: 45a2702ce1 ("ASoC: rt5682: Fix panic in rt5682_jack_detect_handler happening during system shutdown")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210508075151.1626903-1-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Static analysis reports this problem
lpass-wsa-macro.c:1732:6: warning: Array subscript is undefined
if (wsa->ec_hq[ec_tx]) {
^~~~~~~~~~~~~~~~~
The happens because 'ec_tx' is never initialized and there is
no default in switch statement that sets ec_tx. Add a default
case that returns an error before the array is accessed.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210430142117.3272772-1-trix@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Variable d_len_code is set to zero, but this value is never read as
it is overwritten or not used later on, hence it is a redundant
assignment and can be removed.
Clean up the following clang-analyzer warning:
sound/soc/codecs/rt286.c:728:2: warning: Value stored to 'd_len_code' is
never read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1620298735-31708-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following coccicheck warning:
./sound/soc/codecs/lpass-rx-macro.c:2631:2-3: Unneeded semicolon
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20210506021005.4897-1-wanjiabing@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/mt6359.c:274:8: style: Variable 'i' is assigned a
value that is never used. [unreadVariable]
int i = 0, stage = 0;
^
sound/soc/codecs/mt6359.c:274:19: style: Variable 'stage' is assigned
a value that is never used. [unreadVariable]
int i = 0, stage = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210426214701.235106-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning
sound/soc/codecs/mt6359-accdet.c:417:10: style: Variable 'ret' is
assigned a value that is never used. [unreadVariable]
int ret = 0;
^
sound/soc/codecs/mt6359-accdet.c:464:10: style: Variable 'ret' is
assigned a value that is never used. [unreadVariable]
int ret = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210426214701.235106-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210508031512.53783-1-cuibixuan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function number should be FUNC_NUM_MIC_ARRAY(0x2) for the feature unit 0x1E.
Fixes: ca5118c0c0 ('ASoC: rt711-sdca: change capture switch controls')
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20210504100424.8760-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No surprises in this development cycle, and most of works are about
the fixes and the improvements of the existing code, while a new LED
control layer and a few new drivers have been introduced.
Here are some highlights:
Core:
- A common mute-LED framework was introduced;
used by HD-audio for now, more adaption will follow later.
The former "Mic Mute-LED Mode" mixer control has been replaced with
the corresponding sysfs now.
- User-control management was changed to count consumed bytes instead
of capping by number of elements;
this will allow more controls in the normal usage pattern while
avoiding the possible memory exhaustion DoS
ASoC:
- Continued refactoring and cleanups in ASoC core and generic card
drivers
- Wide range of small cppcheck and warning fixes
- New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358
accessory detection, and Realtek RT1019, RT1316, RT711 and RT715
USB-audio:
- Continued improvements and fixes of the implicit feedback mode,
including better support for Pioneer and Roland/BOSS devices
HD-audio:
- Default back to non-buffer preallocation on x86
- Cirrus codec improvements, more quirks for Realtek codecs
Others:
- New virtio sound driver
- FireWire Bebob updates
Note that this PR includes a couple of changes in reset and SPI
drivers, too, and some merge conflicts might happen.
-----BEGIN PGP SIGNATURE-----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=YT3U
-----END PGP SIGNATURE-----
Merge tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"No surprises in this development cycle, and most of work is about the
fixes and the improvements of the existing code, while a new LED
control layer and a few new drivers have been introduced.
Here are some highlights:
Core:
- A common mute-LED framework was introduced. It is used by HD-audio
for now, more adaption will follow later. The former "Mic Mute-LED
Mode" mixer control has been replaced with the corresponding sysfs
now.
- User-control management was changed to count consumed bytes instead
of capping by number of elements; this will allow more controls in
the normal usage pattern while avoiding the possible memory
exhaustion DoS
ASoC:
- Continued refactoring and cleanups in ASoC core and generic card
drivers
- Wide range of small cppcheck and warning fixes
- New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358
accessory detection, and Realtek RT1019, RT1316, RT711 and RT715
USB-audio:
- Continued improvements and fixes of the implicit feedback mode,
including better support for Pioneer and Roland/BOSS devices
HD-audio:
- Default back to non-buffer preallocation on x86
- Cirrus codec improvements, more quirks for Realtek codecs
Others:
- New virtio sound driver
- FireWire Bebob updates"
* tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (587 commits)
ALSA: hda/conexant: Re-order CX5066 quirk table entries
ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices
ALSA: hda/realtek: Re-order ALC662 quirk table entries
ALSA: hda/realtek: Re-order remaining ALC269 quirk table entries
ALSA: hda/realtek: Re-order ALC269 Lenovo quirk table entries
ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries
ALSA: hda/realtek: Re-order ALC269 ASUS quirk table entries
ALSA: hda/realtek: Re-order ALC269 Dell quirk table entries
ALSA: hda/realtek: Re-order ALC269 Acer quirk table entries
ALSA: hda/realtek: Re-order ALC269 HP quirk table entries
ALSA: hda/realtek: Re-order ALC882 Clevo quirk table entries
ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries
ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries
ALSA: usb-audio: Remove redundant assignment to len
ALSA: hda/realtek: Add quirk for Intel Clevo PCx0Dx
ALSA: virtio: fix kernel-doc
ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
ALSA: sb: Fix two use after free in snd_sb_qsound_build
ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer
...
- Add support for Software Nodes to MFD Core
- Remove support for Device Properties from MFD Core
- Use standard APIs in MFD Core
- New Drivers
- Add support for ROHM BD9576MUF and BD9573MUF PMICs
- Add support for Netronix Embedded Controller, PWM and RTC
- Add support for Actions Semi ATC260x PMICs and OnKey
- New Device Support
- Add support for DG1 PCIe Graphics Card to Intel PMT
- Add support for ROHM BD71815 PMIC to ROHM BD71828
- Add support for Tolino Shine 2 HD to Netronix Embedded Controller
- Add support for AX10 BMC Secure Updates to Intel M10 BMC
- Removed Device Support
- Remove Arizona Extcon support from MFD
- Remove ST-E AB8500 Power Supply code from MFD
- Remove AB3100 altogether
- New Functionality
- Add support for SMBus and I2C modes to Dialog DA9063
- Switch to using Software Nodes in Intel (various)
- New/converted Device Tree bindings; rohm,bd71815-pmic, rohm,bd9576-pmic,
netronix,ntxec, actions,atc260x,
ricoh,rn5t618, qcom-pm8xxx
- Fix-ups
- Fix error handling/path; intel_pmt
- Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc
- Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618, max8997
- Use correct data-type; db8500-prcmu
- Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl
- Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio
- Regmap related fix-ups; intel-m10-bmc, sec-core
- Reorder resource freeing during remove; intel_quark_i2c_gpio
- Make table indexing more robust; intel_quark_i2c_gpio
- Fix reference imbalances; arizona-irq
- Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930,
intel-lpss-acpi, intel-lpss-pci,
atc260x-i2c, intel_quark_i2c_gpio
- Bug Fixes
- Fix incorrect (register) values; intel-m10-bmc
- Kconfig related fixes; ABX500_CORE
- Do not clear the Auto Reload Register; stm32-timers
-----BEGIN PGP SIGNATURE-----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=IJSL
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Framework:
- Add support for Software Nodes to MFD Core
- Remove support for Device Properties from MFD Core
- Use standard APIs in MFD Core
New Drivers:
- Add support for ROHM BD9576MUF and BD9573MUF PMICs
- Add support for Netronix Embedded Controller, PWM and RTC
- Add support for Actions Semi ATC260x PMICs and OnKey
New Device Support:
- Add support for DG1 PCIe Graphics Card to Intel PMT
- Add support for ROHM BD71815 PMIC to ROHM BD71828
- Add support for Tolino Shine 2 HD to Netronix Embedded Controller
- Add support for AX10 BMC Secure Updates to Intel M10 BMC
Removed Device Support:
- Remove Arizona Extcon support from MFD
- Remove ST-E AB8500 Power Supply code from MFD
- Remove AB3100 altogether
New Functionality:
- Add support for SMBus and I2C modes to Dialog DA9063
- Switch to using Software Nodes in Intel (various)
New/converted Device Tree bindings:
- rohm bd71815-pmic, rohm bd9576-pmic, netronix ntxec, actions
atc260x, ricoh rn5t618, qcom pm8xxx
- Fix-ups:
- Fix error handling/path; intel_pmt
- Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc
- Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618,
max8997
- Use correct data-type; db8500-prcmu
- Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl
- Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio
- Regmap related fix-ups; intel-m10-bmc, sec-core
- Reorder resource freeing during remove; intel_quark_i2c_gpio
- Make table indexing more robust; intel_quark_i2c_gpio
- Fix reference imbalances; arizona-irq
- Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930,
intel-lpss-acpi, intel-lpss-pci, atc260x-i2c, intel_quark_i2c_gpio
Bug Fixes:
- Fix incorrect (register) values; intel-m10-bmc
- Kconfig related fixes; ABX500_CORE
- Do not clear the Auto Reload Register; stm32-timers"
* tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (84 commits)
mfd: intel-m10-bmc: Add support for MAX10 BMC Secure Updates
Revert "mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell"
mfd: twl: Remove unused inline function twl4030charger_usb_en()
dt-bindings: mfd: Convert pm8xxx bindings to yaml
dt-bindings: mfd: Add compatible for pmk8350 rtc
i2c: designware: Get rid of legacy platform data
mfd: intel_quark_i2c_gpio: Convert I²C to use software nodes
mfd: lpc_sch: Partially revert "Add support for Intel Quark X1000"
mfd: arizona: Fix rumtime PM imbalance on error
mfd: max8997: Replace 8998 with 8997
mfd: core: Use acpi_find_child_device() for child devices lookup
mfd: intel_quark_i2c_gpio: Don't play dirty trick with const
mfd: intel_quark_i2c_gpio: Enable MSI interrupt
mfd: intel_quark_i2c_gpio: Reuse BAR definitions for MFD cell indexing
mfd: ntxec: Support for EC in Tolino Shine 2 HD
mfd: stm32-timers: Avoid clearing auto reload register
mfd: intel_quark_i2c_gpio: Replace I²C speeds with descriptive definitions
mfd: intel_quark_i2c_gpio: Remove unused struct device member
mfd: intel_quark_i2c_gpio: Unregister resources in reversed order
mfd: Kconfig: ABX500_CORE should depend on ARCH_U8500
...
This reverts commit 12f8127fe9.
There is problem with clk_hw_get_hw(). Using it pins the clock provider to
itself, making it impossible to remove the module.
Revert commit 12f8127fe9 ("ASoC: da7219: properly get clk from the
provider") until this gets sorted out.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210428122632.46244-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Here is the big set of tty and serial driver updates for 5.13-rc1.
Actually busy this release, with a number of cleanups happening:
- much needed core tty cleanups by Jiri Slaby
- removal of unused and orphaned old-style serial drivers. If
anyone shows up with this hardware, it is trivial to restore
these but we really do not think they are in use anymore.
- fixes and cleanups from Johan Hovold on a number of termios
setting corner cases that loads of drivers got wrong as well
as removing unneeded code due to tty core changes from long
ago that were never propagated out to the drivers
- loads of platform-specific serial port driver updates and
fixes
- coding style cleanups and other small fixes and updates all
over the tty/serial tree.
All of these have been in linux-next for a while now with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYIa3NQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykMXgCfX3FZgKveI4l94ChXSy4OyKwycHUAn00BzrMC
/7BwA1FnjQnC4zSzuHnm
=bAas
-----END PGP SIGNATURE-----
Merge tag 'tty-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial driver updates from Greg KH:
"Here is the big set of tty and serial driver updates for 5.13-rc1.
Actually busy this release, with a number of cleanups happening:
- much needed core tty cleanups by Jiri Slaby
- removal of unused and orphaned old-style serial drivers. If anyone
shows up with this hardware, it is trivial to restore these but we
really do not think they are in use anymore.
- fixes and cleanups from Johan Hovold on a number of termios setting
corner cases that loads of drivers got wrong as well as removing
unneeded code due to tty core changes from long ago that were never
propagated out to the drivers
- loads of platform-specific serial port driver updates and fixes
- coding style cleanups and other small fixes and updates all over
the tty/serial tree.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'tty-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits)
serial: extend compile-test coverage
serial: stm32: add FIFO threshold configuration
dt-bindings: serial: 8250: update TX FIFO trigger level
dt-bindings: serial: stm32: override FIFO threshold properties
dt-bindings: serial: add RX and TX FIFO properties
serial: xilinx_uartps: drop low-latency workaround
serial: vt8500: drop low-latency workaround
serial: timbuart: drop low-latency workaround
serial: sunsu: drop low-latency workaround
serial: sifive: drop low-latency workaround
serial: txx9: drop low-latency workaround
serial: sa1100: drop low-latency workaround
serial: rp2: drop low-latency workaround
serial: rda: drop low-latency workaround
serial: owl: drop low-latency workaround
serial: msm_serial: drop low-latency workaround
serial: mpc52xx_uart: drop low-latency workaround
serial: meson: drop low-latency workaround
serial: mcf: drop low-latency workaround
serial: lpc32xx_hs: drop low-latency workaround
...
This patch adds the return value when the volume settings were changed.
The userspace application might monitor the kcontrols to check which control changed.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20210422103235.22048-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DAPM event and mixer control could mute/unmute the capture directly.
That will be confused that capture still works if the user settings is unmute before the capture.
Therefore, this patch uses the variables to record the capture switch status of DAPM and mixer.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20210422103220.21987-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using the clk embedded in the clk_hw (which is meant to go
away), a clock provider which need to interact with its own clock should
request clk reference through the clock provider API.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210421120512.413057-6-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Configuring number of channels per LRCLK frame by using e.g.
snd_soc_dai_set_tdm_slot before configuring DAI format was being
overwritten by the latter due to a regmap_write which would write over
the whole register.
Signed-off-by: Niklas Carlsson <niklasc@axis.com>
Link: https://lore.kernel.org/r/20210422130226.15201-1-Niklas.Carlsson@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable Daisy Chain if in TDM mode and the number of played
channels is bigger than the maximum supported number of channels.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1618915453-29445-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The last two patches in this series fix a longstanding issue that prevented
the ALC3263 codec from using a headset mic. This codec can be found on Dell
systems including the Latitude 13 7350, Venue 11 Pro 7140, and XPS 13 9343.
In fact, there is an ACPI quirk for the XPS 13 9343, which forces it to use
legacy HD Audio just to avoid this issue:
https://lore.kernel.org/alsa-devel/CAPeXnHv07HkvcHrYFmZMr8OTp7U7F=k_k=LPYnUtp89iPn2d2Q@mail.gmail.com/
This may allow that ACPI quirk to be removed. Either way, the other systems
mentioned above do not support this quirk and already use the ASoC driver,
so this fix is necessary for headset mic support on those systems.
Note: there is likely other handling for this codec that only exists in the
HDA driver, but which also belongs in the ASoC driver. Commit 394c97f824
("ALSA: hda/realtek - Change EAPD to verb control") describes an issue that
does not seem to be resolved in the ASoC driver, to give an example.
Other patches in this series are not specific to the ALC3263. These patches
set the correct combo jack configuration when headphones are inserted, and
fix a misaligned value set in the DMIC2 Configuration Default register.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=114171
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961
Signed-off-by: David Ward <david.ward@gatech.edu>
David Ward (5):
ASoC: rt286: Fix upper byte in DMIC2 configuration
ASoC: rt286: Configure combo jack for headphones
ASoC: rt298: Configure combo jack for headphones
ASoC: rt286: Make RT286_SET_GPIO_* readable and writable
ASoC: rt286: Generalize support for ALC3263 codec
sound/soc/codecs/rt286.c | 34 +++++++++++++++++++++-------------
sound/soc/codecs/rt298.c | 9 +++++++--
2 files changed, 28 insertions(+), 15 deletions(-)
--
2.31.1
The ALC3263 codec on the XPS 13 9343 is also found on the Latitude 13 7350
and Venue 11 Pro 7140. They require the same handling for the combo jack to
work with a headset: GPIO pin 6 must be set.
The HDA driver always sets this pin on the ALC3263, which it distinguishes
by the codec vendor/device ID 0x10ec0288 and PCI subsystem vendor ID 0x1028
(Dell). The ASoC driver does not use PCI, so adapt this check to use DMI to
determine if Dell is the system vendor.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961
Signed-off-by: David Ward <david.ward@gatech.edu>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210418134658.4333-6-david.ward@gatech.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
During jack detection, the combo jack is configured for a CTIA headset, and
then for an OMTP headset, while sensing the mic connection. If a mic is not
found in either case, the combo jack should be re-configured for headphones
only. This is consistent with the HDA driver behavior.
Signed-off-by: David Ward <david.ward@gatech.edu>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210418134658.4333-4-david.ward@gatech.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
During jack detection, the combo jack is configured for a CTIA headset, and
then for an OMTP headset, while sensing the mic connection. If a mic is not
found in either case, the combo jack should be re-configured for headphones
only. This is consistent with the HDA driver behavior.
Signed-off-by: David Ward <david.ward@gatech.edu>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210418134658.4333-3-david.ward@gatech.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
The ALSA control readback functionality only works for non-volatile
controls, i.e. control values that does not change on their own without
driver interaction.
This doesn't work for readbacks since the DSP firmware updates the
control value. Disable the cache mechanism in the driver if the control
name matches the prefix used for readbacks to ensure that the control
value is valid.
Signed-off-by: Niklas Carlsson <niklasc@axis.com>
Link: https://lore.kernel.org/r/20210419144901.9441-1-Niklas.Carlsson@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The last two patches in this series fix a longstanding issue that prevented
the ALC3263 codec from using a headset mic. This codec can be found on Dell
systems including the Latitude 13 7350, Venue 11 Pro 7140, and XPS 13 9343.
In fact, there is an ACPI quirk for the XPS 13 9343, which forces it to use
legacy HD Audio just to avoid this issue:
https://lore.kernel.org/alsa-devel/CAPeXnHv07HkvcHrYFmZMr8OTp7U7F=k_k=LPYnUtp89iPn2d2Q@mail.gmail.com/
This may allow that ACPI quirk to be removed. Either way, the other systems
mentioned above do not support this quirk and already use the ASoC driver,
so this fix is necessary for headset mic support on those systems.
Note: there is likely other handling for this codec that only exists in the
HDA driver, but which also belongs in the ASoC driver. Commit 394c97f824
("ALSA: hda/realtek - Change EAPD to verb control") describes an issue that
does not seem to be resolved in the ASoC driver, to give an example.
Other patches in this series are not specific to the ALC3263. These patches
set the correct combo jack configuration when headphones are inserted, and
fix a misaligned value set in the DMIC2 Configuration Default register.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=114171
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961
Signed-off-by: David Ward <david.ward@gatech.edu>
David Ward (5):
ASoC: rt286: Fix upper byte in DMIC2 configuration
ASoC: rt286: Configure combo jack for headphones
ASoC: rt298: Configure combo jack for headphones
ASoC: rt286: Make RT286_SET_GPIO_* readable and writable
ASoC: rt286: Generalize support for ALC3263 codec
sound/soc/codecs/rt286.c | 34 +++++++++++++++++++++-------------
sound/soc/codecs/rt298.c | 9 +++++++--
2 files changed, 28 insertions(+), 15 deletions(-)
--
2.31.1
base-commit: a38fd87484
This HDA verb sets the upper byte of the Configuration Default register, so
only an 8-bit value should be used. For the rt298, the same fix was applied
in commit f8f2dc4a71 ("ASoC: rt298: fix wrong setting of gpio2_en").
Signed-off-by: David Ward <david.ward@gatech.edu>
Link: https://lore.kernel.org/r/20210418134658.4333-2-david.ward@gatech.edu
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5682.c:2404:42: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp << RT5682_PLL_M_BP_SFT | RT5682_PLL_RST));
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210416191144.27006-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/lpass-rx-macro.c:1626:9: warning: Identical condition
and return expression 'ret', return value is always 0
[identicalConditionAfterEarlyExit]
return ret;
^
sound/soc/codecs/lpass-rx-macro.c:1623:6: note: If condition 'ret' is
true, the function will return/exit
if (ret)
^
sound/soc/codecs/lpass-rx-macro.c:1626:9: note: Returning identical
expression 'ret'
return ret;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210416191144.27006-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add main capture switch and main capture volume control.
Main capture control has its own channel value respectivelly.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/dfd43a8db04e4d52a889d6f5c1262173@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----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=7O9a
-----END PGP SIGNATURE-----
mergetag object a908a71669
type commit
tag ib-mfd-extcon-v5.13
tagger Lee Jones <lee.jones@linaro.org> 1616067995 +0000
Immutable branch between MFD and Extcon due for the v5.13 merge window
-----BEGIN PGP SIGNATURE-----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=3CZN
-----END PGP SIGNATURE-----
mergetag object eac013a0b7
type commit
tag ib-mfd-input-v5.13-1
tagger Lee Jones <lee.jones@linaro.org> 1615374673 +0000
Immutable branch between MFD and Input due for the v5.13 merge window
-----BEGIN PGP SIGNATURE-----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=NF6J
-----END PGP SIGNATURE-----
mergetag object aa47ad3f85
type commit
tag ib-mfd-platform-x86-v5.13
tagger Lee Jones <lee.jones@linaro.org> 1615373744 +0000
Immutable branch between MFD and Platform/x86 due for the v5.13 merge window
-----BEGIN PGP SIGNATURE-----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=340a
-----END PGP SIGNATURE-----
mergetag object ee0975c308
type commit
tag ib-mfd-power-v5.13
tagger Lee Jones <lee.jones@linaro.org> 1616489771 +0000
Immutable branch between MFD and Power due for the v5.13 merge window
-----BEGIN PGP SIGNATURE-----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=+5eM
-----END PGP SIGNATURE-----
mergetag object edbda8f787
type commit
tag ib-mfd-pwm-rtc-v5.13-1
tagger Lee Jones <lee.jones@linaro.org> 1615374433 +0000
Immutable branch between MFD, PWM and RTC due for the v5.13 merge window
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmBIqH8ACgkQUa+KL4f8
d2F8EhAAi4vdKdfmlkJYcOS/wwWHR+wF3LOrTdmv80oP19/QY5Ctk/zgjYOmet+K
WOLFOH0WCwp+NlEpiFDhlhAqApFNw4F24Dp4iiMGfYF+ohpoDNMIV9bYC9PpLeF1
IsXo/vRsYQN9JtHZEHlICbw+W60jfTx4F1woQVuMM1sTIb65DVlHHEGKBFH4v+ys
fXZWTIhMCnVrJvM26dU4YZ0uj3RbAZlzK5itOzIwaU6OLitc0XlFGH+zsIiHioNl
wsfJJc5WzeJwCbanqsdiA+lAQ3oRhzns0bOSeTyf0xWS1HzKSMBhpkvGLa//5kmD
I5HEtw46OvWtvZ8AaBVeHVlIGZ+00Yxs3ORFK/koGOFcTayh/7QjhS8/wSIW0yp8
Nxwr8OXpHLicJceIm7/1OpfSbawnY0f93Cu2c6rzDLWz0JTzO6f5EmfFr8I/T+bB
7gexysH3JoOYutsPD9EsEoaexFx4ZsYSoPQJ5Jf74pmMJUUkDwzSo2DQb34DM8Ja
uRwka56ayuubhEX8jd5hru/X7Ikl2GYoMG/ZsZ09BfWhGA3F55R6cn0+UiEwj03M
rn6/FSl8EHgAQ5W7JT85rucbBAT2HmuZWV2OFSM3ldlD1Tws/GucDRELn9q37YpS
w7bq+hXd6sHEJnx1vtVnJoXx+0DJdZ00koj4h3xdNm936p7K9/w=
=DySP
-----END PGP SIGNATURE-----
Merge tags 'ib-mfd-clk-gpio-regulator-rtc-v5.13', 'ib-mfd-extcon-v5.13', 'ib-mfd-input-v5.13-1', 'ib-mfd-platform-x86-v5.13', 'ib-mfd-power-v5.13', 'ib-mfd-pwm-rtc-v5.13-1' and 'ib-regulator-list-ramp-helpers-v5.13' into ibs-for-mfd-merged
Immutable branch between MFD, Clock, GPIO, Regulator and RTC due for the v5.13 merge window
Immutable branch between MFD and Extcon due for the v5.13 merge window
Immutable branch between MFD and Input due for the v5.13 merge window
Immutable branch between MFD and Platform/x86 due for the v5.13 merge window
Immutable branch between MFD and Power due for the v5.13 merge window
Immutable branch between MFD, PWM and RTC due for the v5.13 merge window
The snd_soc_dai_ops structures is only stored in the ops field of a
snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure
const to allow the compiler to put it in read-only memory.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210408062644.802988-1-yebin10@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_soc_dai_ops structures is only stored in the ops field of a
snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure
const to allow the compiler to put it in read-only memory.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210408062657.803668-1-yebin10@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_soc_dai_ops structures is only stored in the ops field of a
snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure
const to allow the compiler to put it in read-only memory.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210408062642.802846-1-yebin10@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_soc_dai_ops structures is only stored in the ops field of a
snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure
const to allow the compiler to put it in read-only memory.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210408062647.803141-1-yebin10@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_soc_dai_ops structures is only stored in the ops field of a
snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure
const to allow the compiler to put it in read-only memory.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210408062648.803227-1-yebin10@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_soc_dai_ops structures is only stored in the ops field of a
snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure
const to allow the compiler to put it in read-only memory.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210408062654.803538-1-yebin10@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_soc_dai_ops structures is only stored in the ops field of a
snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure
const to allow the compiler to put it in read-only memory.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210408062650.803309-1-yebin10@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_soc_dai_ops structures is only stored in the ops field of a
snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure
const to allow the compiler to put it in read-only memory.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210408062646.803053-1-yebin10@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_soc_dai_ops structures is only stored in the ops field of a
snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure
const to allow the compiler to put it in read-only memory.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210408062656.803606-1-yebin10@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_soc_dai_ops structures is only stored in the ops field of a
snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure
const to allow the compiler to put it in read-only memory.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210408062701.803865-1-yebin10@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_soc_dai_ops structures is only stored in the ops field of a
snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure
const to allow the compiler to put it in read-only memory.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210408062643.802908-1-yebin10@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In DT binding is mentioned that this driver is compatible with 3106.
So added compatibility string and model number.
Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
Link: https://lore.kernel.org/r/20210408135908.125667-1-jiri.prchal@aksignal.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_soc_dai_ops structures is only stored in the ops field of a
snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure
const to allow the compiler to put it in read-only memory.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210408062700.803792-1-yebin10@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a rumtime PM imbalance between the error handling path
after devm_snd_soc_register_component() and all other error
handling paths. Add a PM runtime increment to balance refcount.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20210408064036.6691-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
For latest design, different package could use the same setting,
therefore the check of pack_id will no longer be used.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/4cbe1cd3b8664140889132464c7dee7b@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_soc_dai_ops structures is only stored in the ops field of a
snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure
const to allow the compiler to put it in read-only memory.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210407074218.3051979-1-yebin10@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clock registration must be performed before the component is
registered. aic32x4_component_probe attempts to get all the
clocks right off the bat. If the component is registered before
the clocks there is a race condition where the clocks may not
be registered by the time aic32x4_componet_probe actually runs.
Fixes: d1c859d314 ("ASoC: codec: tlv3204: Increased maximum supported channels")
Cc: stable@vger.kernel.org
Signed-off-by: Annaliese McDermond <nh6z@nh6z.net>
Link: https://lore.kernel.org/r/0101017889850206-dcac4cce-8cc8-4a21-80e9-4e4bef44b981-000000@us-west-2.amazonses.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5670 codec driver uses DMI quirks to configure the DMIC data-pins,
which means that it knows which DMIC interface is used on a specific
device.
ATM we duplicate this DMI matching inside the UCM profiles to select
the right DMIC interface. Add a rt5670_components() helper which the
machine-driver can use to set the components string of the card so
that UCM can get the info from the components string.
This way we only need to add new DMI quirks in one place.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210402140747.174716-6-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a quirk with the jack-detect and dmic settings necessary to make
jack-detect and the builtin mic work on Dell Venue 10 Pro 5055 tablets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210402140747.174716-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
NPL clock rate is twice the MCLK rate, so set this correctly to
avoid soundwire timeouts.
Fixes: af3d54b997 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210331171235.24824-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
NPL clock rate is twice the MCLK rate, so set this correctly to
avoid soundwire timeouts.
Fixes: c39667ddcf ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210331171235.24824-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck reports a false positive:
sound/soc/codecs/da732x.c:1161:25: warning: Either the condition
'indiv<0' is redundant or there is division by zero at line
1161. [zerodivcond]
fref = (da732x->sysclk / indiv);
^
sound/soc/codecs/da732x.c:1158:12: note: Assuming that condition
'indiv<0' is not redundant
if (indiv < 0)
^
sound/soc/codecs/da732x.c:1161:25: note: Division by zero
fref = (da732x->sysclk / indiv);
^
The code is awfully convoluted/confusing and can be simplified with a
single variable and the BIT macro.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210326221619.949961-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cppcheck warning:
sound/soc/codecs/lm49453.c:1210:11: style: Variable 'pll_clk' is
assigned a value that is never used. [unreadVariable]
pll_clk = BIT(4);
^
FIXME: What is the correct fix?
/* fll clk slection */
pll_clk = BIT(4);
return 0;
is the assignment redundant or the 'return 0' a mistake?
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210326221619.949961-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----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=1uM7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmBkoFEACgkQJNaLcl1U
h9BqTgf5AUfR5NbQgJIUMtdMsuz+bthKGuPnpYhYzNUH0io9i3Sjpt0Mbw21dLp2
nXW+70BH0tJZBGR4DNGpmcpBLH5WPdOR9WIv4vCYy9Pr0uCGGKF/JkGeZAg7/llF
C3+yDfTnF0AvR+74xbf/LTjBPGja/08PED1ZC00NAkLhE3C0Pa/VQ0NaEtPUULWE
ZOWboF7hfQUeGzGPTqNp4Cy0/Pzokk6Fvl4kgfrxjNWO7ojIv9mCAvmYbusLW7NU
3Ph5VGsIuyMeorEoAVOFaBY2nrYG/mFZyzTNWJMgvF1MdeigMPNfbbffrUK0sn6k
e81zgWbwxboEujQ91/EZU7glIqtb6A==
=rr4V
-----END PGP SIGNATURE-----
Merge tag 'mute-led-rework' of https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-5.13
ALSA: control - add generic LED API
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
0x20FF(amp global enable) register was defined as non-volatile,
but it is not. Overheating, overcurrent can cause amp shutdown
in hardware.
'regmap_write' compare register readback value before writing
to avoid same value writing. 'regmap_read' just read cache
not actual hardware value for the non-volatile register.
When amp is internally shutdown by some reason, next 'AMP ON'
command can be ignored because regmap think amp is already ON.
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com>
Link: https://lore.kernel.org/r/20210325033555.29377-1-ryans.lee@maximintegrated.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The call sequence in wm8960_configure_clocking is
ret = wm8960_configure_sysclk();
if (ret >= 0)
goto configure_clock;
....
ret = wm8960_configure_pll();
configure_clock:
...
wm8960_configure_sysclk is called before wm8960_configure_pll, as
there is bitclk relax on both functions, so wm8960_configure_sysclk
always return success, then wm8960_configure_pll() never be called.
With this case:
aplay -Dhw:0,0 -d 5 -r 48000 -f S24_LE -c 2 audio48k24b2c.wav
the required bitclk is 48000 * 24 * 2 = 2304000, bitclk got from
wm8960_configure_sysclk is 3072000, but if go to wm8960_configure_pll.
it can get correct bitclk 2304000.
So bitclk relax condition should be removed in wm8960_configure_sysclk,
then wm8960_configure_pll can be called, and there is also bitclk relax
function in wm8960_configure_pll.
Fixes: 3c01b9ee2a ("ASoC: codec: wm8960: Relax bit clock computation")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1614740862-30196-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
3 new controls are added.
"OVC Autorestart Switch" : controls whether or not the speaker amplifier
automatically re-enables after an overcurrent fault condition.
"THERM Autorestart Switch" : controls whether or not the device
automatically resumes playback when the die temperature recovers from
thermal shutdown.
"CMON Autorestart Switch" : controls whether or not the device
automatically resumes playback when the clock returns after stopping.
Above Auto Restart functions are enabled by default.
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com>
Link: https://lore.kernel.org/r/20210325033555.29377-3-ryans.lee@maximintegrated.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make all arizona codec drivers for which drivers/mfd/arizona-core.c used
to instantiate a "arizona-extcon" child-device use the new arizona-jack.c
library for jack-detection.
This has been tested on a Lenovo Yoga Tablet 2 1051L with a WM5102 codec.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-13-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cleanup the use of dev_foo functions used for logging:
1. Many of these are unnecessarily split over multiple lines
2. Use dev_err_probe() in cases where we might get a -EPROBE_DEFER
return value
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-12-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the snd_soc_jack code to report jack events, instead of using extcon
for reporting the cable-type + an input_dev for reporting the button
presses.
The snd_soc_jack code will report the cable-type through both input_dev
events and through ALSA controls and the button-presses through input_dev
events.
Note that this means that when the codec drivers are moved over to use
the new arizona-jack.c library code instead of having a separate MFD
extcon cell with the extcon-arizona.c driver, we will no longer report
extcon events to userspace for cable-type changes. This should not be
a problem since "standard" Linux distro userspace does not (and has
never) used the extcon class interface for this. Android does have
support for the extcon class interface, but that was introduced in
the same release as support for input_dev cable-type events, so this
should not be a problem for Android either.
Note this also reduces ARIZONA_MAX_MICD_RANGE from 8 to 6, this is
ok to do since this info is always provided through pdata (or defaults)
and cannot be overridden from devicetree. All in-kernel users of the
pdata (and the fallback defaults) define 6 or less buttons/ranges.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-11-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the arizona extcon driver into a helper library for direct use
from the arizona codec-drivers, rather then being bound to a separate
MFD cell.
Note the probe (and remove) sequence is split into 2 parts:
1. The arizona_jack_codec_dev_probe() function inits a bunch of
jack-detect specific variables in struct arizona_priv and tries to get
a number of resources where getting them may fail with -EPROBE_DEFER.
2. Then once the machine driver has create a snd_sock_jack through
snd_soc_card_jack_new() it calls snd_soc_component_set_jack() on
the codec component, which will call the new arizona_jack_set_jack(),
which sets up jack-detection and requests the IRQs.
This split is necessary, because the IRQ handlers need access to the
arizona->dapm pointer and the snd_sock_jack which are not available
when the codec-driver's probe function runs.
Note this requires that machine-drivers for codecs which are converted
to use the new helper functions from arizona-jack.c are modified to
create a snd_soc_jack through snd_soc_card_jack_new() and register
this jack with the codec through snd_soc_component_set_jack().
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-10-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drivers for MFD child-devices such as the arizona codec drivers
and the arizona-extcon driver can choose to either make
runtime_pm_get/_put calls on their own child-device, which will
then be propagated to their parent; or they can make them directly
on their MFD parent-device.
The arizona-extcon code was using runtime_pm_get/_put calls on
its own child-device where as the codec drivers are using
runtime_pm_get/_put calls on their parent.
The arizona-extcon MFD cell/child-device has been removed and this
commit is part of refactoring the arizona-extcon code into a library
to be used directly from the codec drivers.
Specifically this commit moves the code over to make
runtime_pm_get/_put calls on the parent device (on arizona->dev)
bringing the code inline with how the codec drivers do this.
Note this also removes the pm_runtime_enable/_disable calls
as pm_runtime support has already been enabled on the parent-device
by the arizona MFD driver.
This is part of a patch series converting the arizona extcon driver into
a helper library for letting the arizona codec-drivers directly report
jack state through the standard sound/soc/soc-jack.c functions.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-9-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move all the jack-detect variables from struct arizona_extcon_info to
struct arizona_priv.
This is part of a patch series converting the arizona extcon driver into
a helper library for letting the arizona codec-drivers directly report jack
state through the standard sound/soc/soc-jack.c functions.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-8-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The input MCLK is 12.288MHz, the desired output sysclk is 11.2896MHz
and sample rate is 44100Hz, with the configuration pllprescale=2,
postscale=sysclkdiv=1, some chip may have wrong bclk
and lrclk output with pll enabled in master mode, but with the
configuration pllprescale=1, postscale=2, the output clock is correct.
>From Datasheet, the PLL performs best when f2 is between
90MHz and 100MHz when the desired sysclk output is 11.2896MHz
or 12.288MHz, so sysclkdiv = 2 (f2/8) is the best choice.
So search available sysclk_divs from 2 to 1 other than from 1 to 2.
Fixes: 84fdc00d51 ("ASoC: codec: wm9860: Refactor PLL out freq search")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1616150926-22892-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sparse tool complains as follows:
sound/soc/codecs/rt1019.c:927:19: warning:
symbol 'rt1019_i2c_driver' was not declared. Should it be static?
This symbol is not used outside of rt1019.c, so this
commit marks it static.
Fixes: 7ec79d3850 ("ASoC: rt1019: add rt1019 amplifier driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210319094102.4185096-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/tscs454.c:730:37: style: Same value in both branches
of ternary operator. [duplicateValueTernary]
val = pll1 ? FV_PLL1CLKEN_DISABLE : FV_PLL2CLKEN_DISABLE;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
YueHaibing