After FLR, the msix will be cleared, so need to re-enable it.
Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Signed-off-by: Emily.Deng <Emily.Deng@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The thunk needs to mmap all BOs for CPU access to allow the debugger to
access them. Invisible ones are mapped with PROT_NONE.
Fixes: 71df0368e9 ("drm/amdgpu: Implement mmap as GEM object function")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The original logic is to update eDP's backlight level
on every amdgpu dm atomic commit, which causes excessive
DMUB write. As a result, when playing game or moving window
around, DMUB timeout and system lagging are observed.
[How]
We only need to update eDP's backlight level when current level
doesn't match requested level.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
prange is NULL if vm fault retry on invalid address, for this case, can
not use prange to get pdd, use adev to get gpuidx and then get pdd
instead, then increase pdd vm fault counter.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The irq number should be decided by num_crtc, and the num_crtc could change
by parameter.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since there's nothing special in smu implementation for yellow carp,
it's better to reuse the common smu_v13_0 interfaces and drop the
specific smu_v13_0_1.c|h files.
v2: remove the duplicate register offset and shift mask header files as
well.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 2b7605d73b
Some displays are not lighting up when put in LTTPR Transparent Mode
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
We're only treating TMDS as a valid target for infoframe updates which
results in PSR being unable to transition from state 4 to state 5.
[How]
Also allow infoframe updates for DCN3.1 - following how we handle
this path for earlier ASIC as well.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_ras_query_error_count() return an error
if the device doesn't support RAS. This prevents
that function from having to always set the values
of the integer pointers (if set), and thus
prevents function side effects--always to have to
set values of integers if integer pointers set,
regardless of whether RAS is supported or
not--with this change this side effect is
mitigated.
Also, if no pointers are set, don't count, since
we've no way of reporting the counts.
Also, give this function a kernel-doc.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Reported-by: Tom Rix <trix@redhat.com>
Fixes: a46751fbcd ("drm/amdgpu: Fix RAS function interface")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If flr_work takes read_lock, then other threads who takes
read_lock can access hardware when host is doing vf flr.
[How]
flr_work should take write_lock to avoid this case.
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use correct channel and instance values
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove mdelay process and use smu_cmn_send_smc_msg_with_param to send
mode-reset message to SMC.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 1098d658be.
Reason for revert: it causes regressions on several Asics.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 075e8080c1.
Reason for revert: the related commit is reverted.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 31f3324378.
Reason for revert: it causes regressions on several Asics.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 7a68d188d1.
Reason for revert: the related commit is reverted.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 3be4dca197.
Reason for revert: it causes regressions on several Asics.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 51627f0380.
Reason for revert: it causes regression on Aldebaran.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After FLR, the msix will be cleared, so need to re-enable it.
Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Signed-off-by: Emily.Deng <Emily.Deng@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The thunk needs to mmap all BOs for CPU access to allow the debugger to
access them. Invisible ones are mapped with PROT_NONE.
Fixes: 71df0368e9 ("drm/amdgpu: Implement mmap as GEM object function")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
shmem helpers seem a bit sloppy here by automatically rounding up when
actually creating the buffer, which results in under-reporting of what
we actually have. Caught by igt/vgem_basic tests.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603164113.1433476-4-daniel.vetter@ffwll.ch
We were getting a depmod error:
depmod: ERROR: Cycle detected: drm_kms_helper -> drm -> drm_kms_helper
It looks like the rule is that drm_kms_helper can call into drm, but
drm can't call into drm_kms_helper. That means we've got to move the
DP AUX backlight support into drm_dp_helper.
NOTE: as part of this, I didn't try to do any renames of the main
registration function. Even though it's in the drm_dp_helper, it still
feels very parallel to drm_panel_of_backlight().
Fixes: 10f7b40e4f ("drm/panel: add basic DP AUX backlight support")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rajeev Nandan <rajeevny@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210712075933.v2.1.I23eb4cc5a680341e7b3e791632a635566fa5806a@changeid
Store the shadow-buffer mapping's address in struct vkms_composer and
use the value when composing the output. It's the same value as stored
in the GEM SHMEM BO, but frees the composer code from its dependency
on GEM SHMEM.
Using struct dma_buf_map is how framebuffer access is supposed to be.
The long-term plan is to perform all framebuffer access via struct
dma_buf_map and avoid the details of accessing I/O and system memory.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705074633.9425-5-tzimmermann@suse.de
Replace vkms' prepare_fb and cleanup_fb functions with the generic
code for shadow-buffered planes. No functional changes.
This change also fixes a problem where IGT kms_flip tests would
create a segmentation fault within vkms. The driver's prepare_fb
function did not report an error if a BO's vmap operation failed.
The kernel later tried to operate on the non-mapped memory areas.
The shared shadow-plane helpers handle errors correctly, so that
the driver now avoids the segmantation fault.
v2:
* include paragraph about IGT tests in commit message (Melissa)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705074633.9425-4-tzimmermann@suse.de
Export the implementation of duplicate, destroy and reset helpers for
shadow-buffered plane state. Useful for drivers that subclass struct
drm_shadow_plane_state.
The exported functions are wrappers around plane-state implementation,
but using them is the correct thing to do for drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705074633.9425-2-tzimmermann@suse.de
Fix the following fall-through warning:
drivers/gpu/drm/msm/msm_gem.c: In function 'msm_gem_new_impl':
drivers/gpu/drm/msm/msm_gem.c:1170:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
1170 | if (priv->has_cached_coherent)
| ^
drivers/gpu/drm/msm/msm_gem.c:1173:2: note: here
1173 | default:
| ^~~~~~~
by replacing the /* fallthrough */ comment with fallthrough;
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is no need to free a NULL value. Instead, free the object
that is leaking due to the iterator.
The semantic patch that finds this problem is as follows:
// <smpl>
@@
expression x,e;
identifier f;
@@
x = f(...);
if (x == NULL) {
... when any
when != x = e
* of_node_put(x);
...
}
// </smpl>
Fixes: 6529007522 ("drm: of: Add drm_of_lvds_get_dual_link_pixel_order")
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210709200717.3676376-1-Julia.Lawall@inria.fr
The exception_code in register is only 8 bits,So if
fault_status in panfrost_gpu_irq_handler() don't
(& 0xFF),it can't get correct exception reason.
and it's better to show all of the register value
to custom,so it's better fault_status don't (& 0xFF).
Signed-off-by: ChunyouTang <tangchunyou@icubecorp.cn>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708073407.2015-1-tangchunyou@163.com
In preparation to enable -Wimplicit-fallthrough for Clang, fix a
warning by explicitly adding a return; statement:
drivers/gpu/drm/i915/gem/i915_gem_shrinker.c:65:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
nwl_dsi_plat_clk_config structure added in below commit but not
used anywhere in the driver.
commit <44cfc6233447c> ("drm/bridge: Add NWL MIPI DSI host controller
support")
Drop it.
Cc: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210704093433.27717-1-jagan@amarulasolutions.com
This patch adds support for the EDT ETM0350G0DH6 3.5" (320x240) lcd
panel to DRM simple panel driver.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Yunus Bas <y.bas@phytec.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210709200349.2665205-2-y.bas@phytec.de
This patch adds support for the EDT ETMV570G2DHU 5.7" (640x480) lcd panel
to DRM simple panel driver.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Yunus Bas <y.bas@phytec.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210709200349.2665205-1-y.bas@phytec.de
Change
2ef4fb9236 ("drm/vmwgfx: Make sure bo's are unpinned before putting them back")
caused a conflict in one of the drm trees and the merge commit
68a32ba141 ("Merge tag 'drm-next-2021-04-28' of git://anongit.freedesktop.org/drm/drm")
accidently re-added code that the original change was removing.
Fixed by removing the incorrect buffer unpin - it has already been unpinned
two lines above.
Fixes: 68a32ba141 ("Merge tag 'drm-next-2021-04-28' of git://anongit.freedesktop.org/drm/drm")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210615182336.995192-4-zackr@vmware.com
The declarations of ttm_range_man_init and ttm_range_man_fini
have been moved to ttm_range_manager.h so we have to add it
to the include list.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 3eb7d96e94 ("drm/ttm: flip over the range manager to self allocated nodes")
Cc: Christian König <christian.koenig@amd.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609172307.131929-10-zackr@vmware.com
Do not give a warning for the eDP panels if the "bus_format" is
not specified, since most eDP panels can support more than one
bus formats and this can be auto-detected.
Also, update the check to include bpc=10 for the eDP panel.
Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1624726268-14869-5-git-send-email-rajeevny@codeaurora.org
If there is no backlight specified in the device tree and the panel
has access to the DP AUX channel then create a DP AUX backlight if
supported by the panel.
Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1624726268-14869-3-git-send-email-rajeevny@codeaurora.org
Some panels support backlight control over DP AUX channel using
VESA's standard backlight control interface.
Using new DRM eDP backlight helpers, add support to create and
register a backlight for those panels in drm_panel to simplify
the panel drivers.
The panel driver with access to "struct drm_dp_aux" can create and
register a backlight device using following code snippet in its
probe() function:
err = drm_panel_dp_aux_backlight(panel, aux);
if (err)
return err;
Then drm_panel will handle backlight_(enable|disable) calls
similar to the case when drm_panel_of_backlight() is used.
Currently, we are not supporting one feature where the source
device can combine the backlight brightness levels set through
DP AUX and the BL_PWM_DIM eDP connector pin. Since it's not
required for the basic backlight controls, it can be added later.
Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[dianders: added blank line for warning when applying]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1624726268-14869-2-git-send-email-rajeevny@codeaurora.org
When allocations fails that can be NULL now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Tested-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Tested-by: Roberto Sassu <roberto.sassu@huawei.com>
Fixes: bfa3357ef9 ("drm/ttm: allocate resource object instead of embedding it v2")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708114710.8186-1-christian.koenig@amd.com
The list_for_each_entry() iterator, "connector" in this code, can never be
NULL. If we exit the loop without finding the correct connector then
"connector" points invalid memory that is an offset from the list head.
This will eventually lead to memory corruption and presumably a kernel
crash.
Fixes: 9bd81acdb6 ("gma500: Convert Oaktrail to work with new output handling")
Signed-off-by: Harshvardhan Jha <harshvardhan.jha@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210709073959.11443-1-harshvardhan.jha@oracle.com
[Why]
The original logic is to update eDP's backlight level
on every amdgpu dm atomic commit, which causes excessive
DMUB write. As a result, when playing game or moving window
around, DMUB timeout and system lagging are observed.
[How]
We only need to update eDP's backlight level when current level
doesn't match requested level.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
support umc ras function initialization for aldebaran
v2: squash in compile fix
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
prange is NULL if vm fault retry on invalid address, for this case, can
not use prange to get pdd, use adev to get gpuidx and then get pdd
instead, then increase pdd vm fault counter.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The irq number should be decided by num_crtc, and the num_crtc could change
by parameter.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since there's nothing special in smu implementation for yellow carp,
it's better to reuse the common smu_v13_0 interfaces and drop the
specific smu_v13_0_1.c|h files.
v2: remove the duplicate register offset and shift mask header files as
well.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To suppress the annoying warning about version mismatch.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Due to the structure layout change: "uint32_t ThrottlerStatus" -> "
uint8_t ThrottlingPercentage[THROTTLER_COUNT]".
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Due to the structure layout change: "uint32_t ThrottlerStatus" -> "
uint8_t ThrottlingPercentage[THROTTLER_COUNT]".
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If copy_to_user() fails then this should return -EFAULT instead of
-EINVAL.
Fixes: c65b0805e7 ("drm/amdgpu: RAS EEPROM table is now in debugfs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This error path needs to unlock before returning. While we're at it,
the correct error code from copy_to_user() failure is -EFAULT, not
-EINVAL.
Fixes: c65b0805e7 ("drm/amdgpu: RAS EEPROM table is now in debugfs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Creating a vkms_config debugfs file in vkms_drv.c to get/track vkms config
data, for the long-term plan of making vkms configurable and have multiple
different instances.
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708092002.11847-1-martinsdecarvalhobeatriz@gmail.com
dma-buf:
- doc fixes
amdgpu:
- Misc Navi fixes
- Powergating fix
- Yellow Carp updates
- Beige Goby updates
- S0ix fix
- Revert overlay validation fix
- GPU reset fix for DC
- PPC64 fix
- Add new dimgrey cavefish DID
- RAS fix
- TTM fixes
amdkfd:
- SVM fixes
radeon:
- Fix missing drm_gem_object_put in error path
- NULL ptr deref fix
i915:
- display DP VSC fix
- DG1 display fix
- IRQ fixes
- IRQ demidlayering
gma500:
- bo leaks in error paths fixed
-----BEGIN PGP SIGNATURE-----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=HX2N
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2021-07-08-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Some fixes for rc1 that came in the past weeks, mainly a bunch of
amdgpu fixes, some i915 and the rest are misc around the place. I'm
sending this a bit early so some more stuff may show up, but I'll
probably take tomorrow off.
dma-buf:
- doc fixes
amdgpu:
- Misc Navi fixes
- Powergating fix
- Yellow Carp updates
- Beige Goby updates
- S0ix fix
- Revert overlay validation fix
- GPU reset fix for DC
- PPC64 fix
- Add new dimgrey cavefish DID
- RAS fix
- TTM fixes
amdkfd:
- SVM fixes
radeon:
- Fix missing drm_gem_object_put in error path
- NULL ptr deref fix
i915:
- display DP VSC fix
- DG1 display fix
- IRQ fixes
- IRQ demidlayering
gma500:
- bo leaks in error paths fixed"
* tag 'drm-next-2021-07-08-1' of git://anongit.freedesktop.org/drm/drm: (52 commits)
drm/i915: Drop all references to DRM IRQ midlayer
drm/i915: Use the correct IRQ during resume
drm/i915/display/dg1: Correctly map DPLLs during state readout
drm/i915/display: Do not zero past infoframes.vsc
drm/amdgpu: Conditionally reset SDMA RAS error counts
drm/amdkfd: Maintain svm_bo reference in page->zone_device_data
drm/amdkfd: add invalid pages debug at vram migration
drm/amdkfd: skip migration for pages already in VRAM
drm/amdkfd: skip invalid pages during migrations
drm/amdkfd: classify and map mixed svm range pages in GPU
drm/amdkfd: use hmm range fault to get both domain pfns
drm/amdgpu: get owner ref in validate and map
drm/amdkfd: set owner ref to svm range prefault
drm/amdkfd: add owner ref param to get hmm pages
drm/amdkfd: device pgmap owner at the svm migrate init
drm/amdkfd: inc counter on child ranges with xnack off
drm/amd/display: Extend DMUB diagnostic logging to DCN3.1
drm/amdgpu: Update NV SIMD-per-CU to 2
drm/amdgpu: add new dimgrey cavefish DID
drm/amd/pm: skip PrepareMp1ForUnload message in s0ix
...
The i2c_transfer() function returns negatives or else the number of
messages transferred. This code does not work because ARRAY_SIZE()
is type size_t and so that means negative values of "r" are type
promoted to high positive values which are greater than the ARRAY_SIZE().
Fix this by changing the < to != which works regardless of type
promotion.
Fixes: 746b584762 ("drm/amdgpu: Fixes to the AMDGPU EEPROM driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If amdgpu_eeprom_read() returns a negative error code then the error
handling checks:
if (res < buf_size) {
The problem is that "buf_size" is a u32 so negative values are type
promoted to a high positive values and the condition is false. Fix
this by changing the type of "buf_size" to int.
Fixes: 63d4c081a5 ("drm/amdgpu: Optimize EEPROM RAS table I/O")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
EDID CTS requires at least 2k (16 blocks) to be readable.
[How]
Increase EDID buffer size to 2k
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When requesting clocks from SMU which takes MHz inputs, DC will round
down KHz when converting to MHz, thus potentially requesting too low a
clock value.
[How]
Round up (ceil) when converting KHz to MHz for clock requests to SMU.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Updated SCR definition for FW boot options for Separate DCN init
for DMUB FW loaded in VBL
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Type adjustments and formatting fixes.
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 2b7605d73b
Some displays are not lighting up when put in LTTPR Transparent Mode
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We're only treating TMDS as a valid target for infoframe updates which
results in PSR being unable to transition from state 4 to state 5.
[How]
Also allow infoframe updates for DCN3.1 - following how we handle
this path for earlier ASIC as well.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Changes in DM needed to support Freesync HDMI on DMUB.
[How]
Change implementation to parse CEA blocks in case of DMUB-enabled ASICs.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added NULL checks before two problematic statements
Signed-off-by: Wang <anguwang@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dmub would notify x86 response time violation by GPINT_DATAOUT
[How]
1. Use GPINT_DATAOUT to trigger x86 interrupt
2. Register GPINT_DATAOUT interrupt handler.
3. Trigger ACR while GPINT_DATAOUT occurred.
Signed-off-by: Chun-Liang Chang <Chun-Liang.Chang@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a difference between our default behavior and override
behavior. For default behavior we need to decide link training settings
within specs' limitation and mandates.
For override behavior we do not need to follow all these requirements.
We are isolating override decision to its own function to maintain the
integrity of our specs compliant default behavior.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_ras_query_error_count() return an error
if the device doesn't support RAS. This prevents
that function from having to always set the values
of the integer pointers (if set), and thus
prevents function side effects--always to have to
set values of integers if integer pointers set,
regardless of whether RAS is supported or
not--with this change this side effect is
mitigated.
Also, if no pointers are set, don't count, since
we've no way of reporting the counts.
Also, give this function a kernel-doc.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Reported-by: Tom Rix <trix@redhat.com>
Fixes: a46751fbcd ("drm/amdgpu: Fix RAS function interface")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If flr_work takes read_lock, then other threads who takes
read_lock can access hardware when host is doing vf flr.
[How]
flr_work should take write_lock to avoid this case.
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The I2C IP doesn't support writes or reads of 0 bytes.
In order for a START/STOP transaction to take
place on the bus, the data written/read has to be
at least one byte.
That is, you cannot generate a write with 0 bytes,
just to get the ACK from a device, just so you can
probe that device if it is on the bus and so to
discover all devices on the bus--you'll have to
read at least one byte. Writes of 0 bytes generate
no START/STOP on this I2C IP--the bus is not
engaged at all.
Set the I2C_AQ_NO_ZERO_LEN to the existing I2C
quirk tables for Aldebaran, Arcturus, Navi10 and
Sienna Cichlid, and add a quirk table to the I2C
driver which drives the bus when the SMU
doesn't--for instance on Vega20.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Lijo Lazar <Lijo.Lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
GPU timing counters are read via KIQ under sriov, which will introduce
a delay.
[How]
It could be directly read by MMIO.
v2: Add additional check to prevent carryover issue.
v3: Only check for carryover for once to prevent performance issue.
v4: Add comments of the rough frequency where carryover happens.
v5: Remove mutex and gfxoff ctrl unused with current timing registers.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Acked-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.co>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is based on reverting two patches back.
drm/amdkfd: Make TLB flush conditional on mapping
drm/amdgpu: Add table_freed parameter to amdgpu_vm_bo_update
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use new helper function amdgpu_vm_set_pasid() to
assign vm pasid value. This also ensures that we don't free
a pasid from vm code as pasids are allocated somewhere else.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace idr with xarray as we actually need hash functionality.
Cleanup code related to vm pasid by adding helper function.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Provide a way for userspace to choose synchronous flushing/pageflips.
This helps save CPU and power.
It is also useful for test scripts since userspace can know when a flush
has happended and wait before doing the next visual test.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Peter Stuge <peter@stuge.se>
Link: https://patchwork.freedesktop.org/patch/msgid/20210703141321.35494-2-noralf@tronnes.org
There'a limit to how big a kmalloc buffer can be, and as memory gets
fragmented it becomes more difficult to get big buffers. The downside of
smaller buffers is that the driver has to split the transfer up which
hampers performance. Compression might also take a hit because of the
splitting.
Solve this by allocating the transfer buffer using vmalloc and create a
SG table to be passed on to the USB subsystem. vmalloc_32() is used to
avoid DMA bounce buffers on USB controllers that can only access 32-bit
addresses.
This also solves the problem that split transfers can give host side
tearing since flushing is decoupled from rendering.
usb_sg_wait() doesn't have timeout handling builtin, so it is wrapped in
a timer like 4 out of 6 users in the kernel have done.
v2:
- Use DIV_ROUND_UP (Linus)
- Add timeout note to the commit log (Linus)
- Expand note about upper buffer limit (Linus)
- Change var name s/timer/ctx/ in gud_usb_bulk_timeout()
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701170748.58009-2-noralf@tronnes.org
Free transfer and compression buffers on device removal instead of at
DRM device removal time. This ensures that the usual 2x8MB buffers are
released when the device is unplugged and not kept around should
userspace keep the DRM device fd open.
At least Ubuntu 20.04 doesn't release the DRM device on unplug.
The damage_lock mutex is not destroyed because it is used outside the
drm_dev_enter/exit block in gud_pipe_update(). AFAICT it's possible for
an open fbdev descriptor to trigger a commit after the USB device is gone.
v2: Don't destroy damage_lock
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701170748.58009-1-noralf@tronnes.org
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210706075425.9257-1-tzimmermann@suse.de
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
Vmwgfx already uses Linux IRQ functions. All that's left to replace
is the reference to struct drm_device.irq. Use irq value of struct
pci_dev instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210706072253.6844-1-tzimmermann@suse.de
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210706074545.8763-1-tzimmermann@suse.de
The function qxl_gem_prime_mmap() returns an error. The two callers
of gem_prime_mmap are drm_fbdev_fb_mmap() and drm_gem_dmabuf_mmap(),
which both already handle NULL-callbacks with an error code. So clear
gem_prime_mmap in qxl and remove qxl_gem_prime_mmap().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624090500.8320-1-tzimmermann@suse.de
d3_entered flag is used to mark for vgpu_reset a previous power
transition from D3->D0, typically for VM resume from S3, so that gvt
could skip PPGTT invalidation in current vgpu_reset during resuming.
In case S0ix exit, although there is D3->D0, guest driver continue to
use vgpu as normal, with d3_entered set, until next shutdown/reboot or
power transition.
If a reboot follows a S0ix exit, device power state transite as:
D0->D3->D0->D0(reboot), while system power state transites as:
S0->S0 (reboot). There is no vgpu_reset until D0(reboot), thus
d3_entered won't be cleared, the vgpu_reset will skip PPGTT invalidation
however those PPGTT entries are no longer valid. Err appears like:
gvt: vgpu 2: vfio_pin_pages failed for gfn 0xxxxx, ret -22
gvt: vgpu 2: fail: spt xxxx guest entry 0xxxxx type 2
gvt: vgpu 2: fail: shadow page xxxx guest entry 0xxxxx type 2.
Give gvt a chance to clear d3_entered on elsp cmd submission so that the
states before & after S0ix enter/exit are consistent.
Fixes: ba25d97757 ("drm/i915/gvt: Do not destroy ppgtt_mm during vGPU D3->D0.")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210707004531.4873-1-colin.xu@intel.com
a bug fix of IRQs usages and cleanup references to the DRM IRQ midlayer.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmDlw5EACgkQ+mJfZA7r
E8opywf/TlQC3hwWhOEfit2Sr3YbJVtqVR/1AmTPW+/5PoothXor2tuWpIijAj9L
UGgVcFjCCJ22uC9GQQewW8E9BGM8P6+0QLrNp9EwrjlzuEjLXz3UYjdoTuXROYQu
Czquux2HXohrL/wSA6lyWqKyPS/vgajengbR9A7WSreq1c5nkZC6EIklQawM2DsK
fa45WrCu9kPo9FPjcEI5KpL68DzStazfA4nDrNve7R6hEV05ouUGo7t5qDq2yPFf
wZm/+KjTfLfPQ8ab+RTsccEc2fFP+pcpy2iq2n7FVHLjCzZUhVnrBeDPKX1H35yX
vx7xM7y2S7MaT0bLmkiU+b6ISVyExA==
=Ew6e
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-fixes-2021-07-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
One fix targeting stable for display DP VSC, plus DG1 display fix and
a bug fix of IRQs usages and cleanup references to the DRM IRQ midlayer.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YOXDp/+CFDgJ2/7f@intel.com
Commit 161058fb89 ("drm/i915: Add remaining conversions to GRAPHICS_VER")
did the last conversions to the new macros for version checks, but left
one instance behind and some other changes sneaked in to use INTEL_GEN.
Remove the last users so we can remove the macros.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707181325.2130821-3-lucas.demarchi@intel.com
The code in xcs_resume() probably didn't work as intended. It uses
struct drm_device.irq, which is allocated to 0, but never initialized
by i915 to the device's interrupt number.
Change all calls to synchronize_hardirq() to intel_synchronize_irq(),
which uses the correct interrupt. _hardirq() functions are not needed
in this context.
v5:
* go back to _hardirq() after PCI probe reported wrong
context; add rsp comment
v4:
* switch everything to intel_synchronize_irq() (Daniel)
v3:
* also use intel_synchronize_hardirq() at another callsite
v2:
* wrap irq code in intel_synchronize_hardirq() (Ville)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 536f77b1ca ("drm/i915/gt: Call stop_ring() from ring resume, again")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701173618.10718-2-tzimmermann@suse.de
(cherry picked from commit 27e4b467d9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
_DG1_DPCLKA0_CFGCR0 maps between DPLL 0 and 1 with one bit for phy A
and B while _DG1_DPCLKA1_CFGCR0 maps between DPLL 2 and 3 with one
bit for phy C and D.
Reusing _cnl_ddi_get_pll() don't take that into cosideration returing
DPLL 0 and 1 for phy C and D.
That is a regression introduced in the refactor done in
commit 351221ffc5 ("drm/i915: Move DDI clock readout to
encoder->get_config()").
While at it also dropping the macros previously used, not reusing it
to improve readability.
BSpec: 50286
Fixes: 351221ffc5 ("drm/i915: Move DDI clock readout to encoder->get_config()")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630210522.162674-1-jose.souza@intel.com
(cherry picked from commit 3352d86dcd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
intel_dp_vsc_sdp_unpack() was using a memset() size (36, struct dp_sdp)
larger than the destination (24, struct drm_dp_vsc_sdp), clobbering
fields in struct intel_crtc_state after infoframes.vsc. Use the actual
target size for the memset().
Fixes: 1b404b7dbb ("drm/i915/dp: Read out DP SDPs")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617213301.1824728-1-keescook@chromium.org
(cherry picked from commit c88e2647c5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Adjust the DVP enable/disable sequence to avoid a pixel getting stuck
in an internal, non resettable FIFO within PixelValve when changing
HDMI resolution.
The blank pixels features of the DVP can prevent signals back to
pixelvalve causing it to not clear the FIFO. Adjust the ordering
and timing of operations to ensure the clear signal makes it through to
pixelvalve.
Signed-off-by: Tim Gover <tim.gover@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210628130533.144617-1-maxime@cerno.tech
We don't want to print an error message each time
devm_snd_soc_register_card() returns -EPROBE_DEFER, the function will
most likely succeed some time in the future, once the missing resources
are available. So use dev_err_probe(), which will redirect the messages
to the debug log level in such case.
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210629121723.11523-1-nsaenzju@redhat.com
Moving the driver-specific mmap code into a GEM object function allows
for using DRM helpers for various mmap callbacks.
The respective vgem functions are being removed. The file_operations
structure vgem_driver_fops is now being created by the helper macro
DEFINE_DRM_GEM_FOPS().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624095238.8804-1-tzimmermann@suse.de
Here is the small set of driver core and debugfs updates for 5.14-rc1.
Included in here are:
- debugfs api cleanups (touched some drivers)
- devres updates
- tiny driver core updates and tweaks
Nothing major in here at all, and all have been in linux-next for a
while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYOM7jA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yloDQCfZOlLYXF+2KgXJQqevNnRiu7/B1gAn3aCX6xh
UWVUfu5LDIXi2uFERRT1
=Ze3R
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core changes from Greg KH:
"Here is the small set of driver core and debugfs updates for 5.14-rc1.
Included in here are:
- debugfs api cleanups (touched some drivers)
- devres updates
- tiny driver core updates and tweaks
Nothing major in here at all, and all have been in linux-next for a
while with no reported issues"
* tag 'driver-core-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits)
docs: ABI: testing: sysfs-firmware-memmap: add some memmap types.
devres: Enable trace events
devres: No need to call remove_nodes() when there none present
devres: Use list_for_each_safe_from() in remove_nodes()
devres: Make locking straight forward in release_nodes()
kernfs: move revalidate to be near lookup
drivers/base: Constify static attribute_group structs
firmware_loader: remove unneeded 'comma' macro
devcoredump: remove contact information
driver core: Drop helper devm_platform_ioremap_resource_wc()
component: Rename 'dev' to 'parent'
component: Drop 'dev' argument to component_match_realloc()
device property: Don't check for NULL twice in the loops
driver core: auxiliary bus: Fix typo in the docs
drivers/base/node.c: make CACHE_ATTR define static DEVICE_ATTR_RO
debugfs: remove return value of debugfs_create_ulong()
debugfs: remove return value of debugfs_create_bool()
scsi: snic: debugfs: remove local storage of debugfs files
b43: don't save dentries for debugfs
b43legacy: don't save dentries for debugfs
...
Inline mgag200_device_init() into mgag200_device_create(), which is
the only caller. Also remove a duplicate error message for
mgag200_modeset_init(). The function will print an error if/where it
failed.
v2:
* include a note about the removed error message in
changelog (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702075642.27834-3-tzimmermann@suse.de
The bochs driver is only ~600 lines of code. Putting it into tiny/
cleans up the DRM directory slightly. Some style problems were fixed
and unneeded include statements were removed. No functional changes.
v2:
* make bochs_mode_funcs static (Daniel, kernel test robot)
* rebase onto aperture API changes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702075434.27677-2-tzimmermann@suse.de
- Added option for per CPU threads to the hwlat tracer
- Have hwlat tracer handle hotplug CPUs
- New tracer: osnoise, that detects latency caused by interrupts, softirqs
and scheduling of other tasks.
- Added timerlat tracer that creates a thread and measures in detail what
sources of latency it has for wake ups.
- Removed the "success" field of the sched_wakeup trace event.
This has been hardcoded as "1" since 2015, no tooling should be looking
at it now. If one exists, we can revert this commit, fix that tool and
try to remove it again in the future.
- tgid mapping fixed to handle more than PID_MAX_DEFAULT pids/tgids.
- New boot command line option "tp_printk_stop", as tp_printk causes trace
events to write to console. When user space starts, this can easily live
lock the system. Having a boot option to stop just after boot up is
useful to prevent that from happening.
- Have ftrace_dump_on_oops boot command line option take numbers that match
the numbers shown in /proc/sys/kernel/ftrace_dump_on_oops.
- Bootconfig clean ups, fixes and enhancements.
- New ktest script that tests bootconfig options.
- Add tracepoint_probe_register_may_exist() to register a tracepoint
without triggering a WARN*() if it already exists. BPF has a path from
user space that can do this. All other paths are considered a bug.
- Small clean ups and fixes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYN8YPhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhxLAP9Mo5hHv7Hg6W7Ddv77rThm+qclsMR/
yW0P+eJpMm4+xAD8Cq03oE1DimPK+9WZBKU5rSqAkqG6CjgDRw6NlIszzQQ=
=WEPR
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Added option for per CPU threads to the hwlat tracer
- Have hwlat tracer handle hotplug CPUs
- New tracer: osnoise, that detects latency caused by interrupts,
softirqs and scheduling of other tasks.
- Added timerlat tracer that creates a thread and measures in detail
what sources of latency it has for wake ups.
- Removed the "success" field of the sched_wakeup trace event. This has
been hardcoded as "1" since 2015, no tooling should be looking at it
now. If one exists, we can revert this commit, fix that tool and try
to remove it again in the future.
- tgid mapping fixed to handle more than PID_MAX_DEFAULT pids/tgids.
- New boot command line option "tp_printk_stop", as tp_printk causes
trace events to write to console. When user space starts, this can
easily live lock the system. Having a boot option to stop just after
boot up is useful to prevent that from happening.
- Have ftrace_dump_on_oops boot command line option take numbers that
match the numbers shown in /proc/sys/kernel/ftrace_dump_on_oops.
- Bootconfig clean ups, fixes and enhancements.
- New ktest script that tests bootconfig options.
- Add tracepoint_probe_register_may_exist() to register a tracepoint
without triggering a WARN*() if it already exists. BPF has a path
from user space that can do this. All other paths are considered a
bug.
- Small clean ups and fixes
* tag 'trace-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (49 commits)
tracing: Resize tgid_map to pid_max, not PID_MAX_DEFAULT
tracing: Simplify & fix saved_tgids logic
treewide: Add missing semicolons to __assign_str uses
tracing: Change variable type as bool for clean-up
trace/timerlat: Fix indentation on timerlat_main()
trace/osnoise: Make 'noise' variable s64 in run_osnoise()
tracepoint: Add tracepoint_probe_register_may_exist() for BPF tracing
tracing: Fix spelling in osnoise tracer "interferences" -> "interference"
Documentation: Fix a typo on trace/osnoise-tracer
trace/osnoise: Fix return value on osnoise_init_hotplug_support
trace/osnoise: Make interval u64 on osnoise_main
trace/osnoise: Fix 'no previous prototype' warnings
tracing: Have osnoise_main() add a quiescent state for task rcu
seq_buf: Make trace_seq_putmem_hex() support data longer than 8
seq_buf: Fix overflow in seq_buf_putmem_hex()
trace/osnoise: Support hotplug operations
trace/hwlat: Support hotplug operations
trace/hwlat: Protect kdata->kthread with get/put_online_cpus
trace: Add timerlat tracer
trace: Add osnoise tracer
...
Merge more updates from Andrew Morton:
"190 patches.
Subsystems affected by this patch series: mm (hugetlb, userfaultfd,
vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock,
migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap,
zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc,
core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs,
signals, exec, kcov, selftests, compress/decompress, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
ipc/util.c: use binary search for max_idx
ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
ipc: use kmalloc for msg_queue and shmid_kernel
ipc sem: use kvmalloc for sem_undo allocation
lib/decompressors: remove set but not used variabled 'level'
selftests/vm/pkeys: exercise x86 XSAVE init state
selftests/vm/pkeys: refill shadow register after implicit kernel write
selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
kcov: add __no_sanitize_coverage to fix noinstr for all architectures
exec: remove checks in __register_bimfmt()
x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned
hfsplus: report create_date to kstat.btime
hfsplus: remove unnecessary oom message
nilfs2: remove redundant continue statement in a while-loop
kprobes: remove duplicated strong free_insn_page in x86 and s390
init: print out unknown kernel parameters
checkpatch: do not complain about positive return values starting with EPOLL
checkpatch: improve the indented label test
checkpatch: scripts/spdxcheck.py now requires python3
...
If we hit the error path here we unconditionally call
i915_gem_stolen_remove_node, even though we only allocate the
compressed_llb on older platforms. Therefore we should first check that
we actually allocated the node before trying to remove it.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3709
Fixes: 46b2c40e0a ("drm/i915/fbc: Allocate llb before cfb")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701090326.1056452-1-matthew.auld@intel.com
Some NVIDIA GPUs do not support direct atomic access to system memory via
PCIe. Instead this must be emulated by granting the GPU exclusive access
to the memory. This is achieved by replacing CPU page table entries with
special swap entries that fault on userspace access.
The driver then grants the GPU permission to update the page undergoing
atomic access via the GPU page tables. When CPU access to the page is
required a CPU fault is raised which calls into the device driver via MMU
notifiers to revoke the atomic access. The original page table entries
are then restored allowing CPU access to proceed.
Link: https://lkml.kernel.org/r/20210616105937.23201-11-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Call mmu_interval_notifier_insert() as part of nouveau_range_fault().
This doesn't introduce any functional change but makes it easier for a
subsequent patch to alter the behaviour of nouveau_range_fault() to
support GPU atomic operations.
Link: https://lkml.kernel.org/r/20210616105937.23201-10-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
MMU notifier ranges have a migrate_pgmap_owner field which is used by
drivers to store a pointer. This is subsequently used by the driver
callback to filter MMU_NOTIFY_MIGRATE events. Other notifier event types
can also benefit from this filtering, so rename the 'migrate_pgmap_owner'
field to 'owner' and create a new notifier initialisation function to
initialise this field.
Link: https://lkml.kernel.org/r/20210616105937.23201-6-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Suggested-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
_DG1_DPCLKA0_CFGCR0 maps between DPLL 0 and 1 with one bit for phy A
and B while _DG1_DPCLKA1_CFGCR0 maps between DPLL 2 and 3 with one
bit for phy C and D.
Reusing _cnl_ddi_get_pll() don't take that into cosideration returing
DPLL 0 and 1 for phy C and D.
That is a regression introduced in the refactor done in
commit 351221ffc5 ("drm/i915: Move DDI clock readout to
encoder->get_config()").
While at it also dropping the macros previously used, not reusing it
to improve readability.
BSpec: 50286
Fixes: 351221ffc5 ("drm/i915: Move DDI clock readout to encoder->get_config()")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630210522.162674-1-jose.souza@intel.com
In case when psp_init_asd_microcode() fails to load ASD microcode file,
psp_v12_0_init_microcode() tries to print the firmware filename that
failed to load before bailing out.
This is wrong because:
- the firmware filename it would want it print is an incorrect one as
psp_init_asd_microcode() and psp_v12_0_init_microcode() are loading
different filenames
- it tries to print fw_name, but that's not yet been initialized by that
time, so it prints random stack contents, e.g.
amdgpu 0000:04:00.0: Direct firmware load for amdgpu/renoir_asd.bin failed with error -2
amdgpu 0000:04:00.0: amdgpu: fail to initialize asd microcode
amdgpu 0000:04:00.0: amdgpu: psp v12.0: Failed to load firmware "\xfeTO\x8e\xff\xff"
Fix that by bailing out immediately, instead of priting the bogus error
message.
Reported-by: Vojtech Pavlik <vojtech@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 4192f7b576.
It is not true (as stated in the reverted commit changelog) that we never
unmap the BAR on failure; it actually does happen properly on
amdgpu_driver_load_kms() -> amdgpu_driver_unload_kms() ->
amdgpu_device_fini() error path.
What's worse, this commit actually completely breaks resource freeing on
probe failure (like e.g. failure to load microcode), as
amdgpu_driver_unload_kms() notices adev->rmmio being NULL and bails too
early, leaving all the resources that'd normally be freed in
amdgpu_acpi_fini() and amdgpu_device_fini() still hanging around, leading
to all sorts of oopses when someone tries to, for example, access the
sysfs and procfs resources which are still around while the driver is
gone.
Fixes: 4192f7b576 ("drm/amdgpu: unmap register bar on device init failure")
Reported-by: Vojtech Pavlik <vojtech@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bring drm-intel-next closer to drm-next and drm-intel-gt-next for a more
feasible baseline for topic branches.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Print the name of the DRM driver when taking over fbdev devices. Makes
the output to dmesg more consistent. Note that the driver name is only
used for printing a string to the kernel log. No UAPI is affected by this
change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Chen-Yu Tsai <wens@csie.org> # sun4i
Acked-by: Neil Armstrong <narmstrong@baylibre.com> # meson
Link: https://patchwork.freedesktop.org/patch/msgid/20210629135833.22679-1-tzimmermann@suse.de
Experience has shown that 1ms is sometimes not enough, even when the GPU
is running at its maximum frequency, not to mention that an MMU operation
might take longer if the GPU is running at a lower frequency, which is
likely to be the case if devfreq is active.
Let's pick a significantly bigger timeout value (1ms -> 100ms) to be on
the safe side.
v5:
* New patch
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-17-boris.brezillon@collabora.com
The hardware has a set of '_NEXT' registers that can hold a second job
while the first is executing. Make use of these registers to enqueue a
second job per slot.
v5:
* Fix a comment in panfrost_job_init()
v3:
* Fix the done/err job dequeuing logic to get a valid active state
* Only enable the second slot on GPUs supporting jobchain disambiguation
* Split interrupt handling in sub-functions
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-16-boris.brezillon@collabora.com
If the process who submitted these jobs decided to close the FD before
the jobs are done it probably means it doesn't care about the result.
v5:
* Add a panfrost_exception_is_fault() helper and the
DRM_PANFROST_EXCEPTION_MAX_NON_FAULT value
v4:
* Don't disable/restore irqs when taking the job_lock (not needed since
this lock is never taken from an interrupt context)
v3:
* Set fence error to ECANCELED when a TERMINATED exception is received
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-15-boris.brezillon@collabora.com
If we can recover from a fault without a reset there's no reason to
issue one.
v3:
* Drop the mention of Valhall requiring a reset on JOB_BUS_FAULT
* Set the fence error to -EINVAL instead of having per-exception
error codes
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-14-boris.brezillon@collabora.com
This is not yet needed because we let active jobs be killed during by
the reset and we don't really bother making sure they can be restarted.
But once we start adding soft-stop support, controlling when we deal
with the remaining interrrupts and making sure those are handled before
the reset is issued gets tricky if we keep job interrupts active.
Let's prepare for that and mask+flush job IRQs before issuing a reset.
v4:
* Add a comment explaining why we WARN_ON(!job) in the irq handler
* Keep taking the job_lock when evicting stalled jobs
v3:
* New patch
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-11-boris.brezillon@collabora.com
Now that we can pass our own workqueue to drm_sched_init(), we can use
an ordered workqueue on for both the scheduler timeout tdr and our own
reset work (which we use when the reset is not caused by a fault/timeout
on a specific job, like when we have AS_ACTIVE bit stuck). This
guarantees that the timeout handlers and reset handler can't run
concurrently which drastically simplifies the locking.
v5:
* Don't call cancel_delayed_timeout() in the reset path (those works
are canceled in drm_sched_stop())
v4:
* Actually pass the reset workqueue to drm_sched_init()
* Don't call cancel_work_sync() in panfrost_reset(). It will deadlock
since it might be called from the reset work, which is executing and
cancel_work_sync() will wait for the handler to return. Checking the
reset pending status should avoid spurious resets
v3:
* New patch
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-10-boris.brezillon@collabora.com
This should avoid switching to interrupt context when the GPU is under
heavy use.
v3:
* Don't take the job_lock in panfrost_job_handle_irq()
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-9-boris.brezillon@collabora.com
Do the exception -> string translation using a table. This way we get
rid of those magic numbers and can easily add new fields if we need
to attach extra information to exception types.
v4:
* Don't expose exception type to userspace
* Merge the enum definition and the enum -> string table declaration
in the same patch
v3:
* Drop the error field
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-7-boris.brezillon@collabora.com
If the fence creation fail, we can return the error pointer directly.
The core will update the fence error accordingly.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-4-boris.brezillon@collabora.com
Mali Midgard/Bifrost GPUs have 3 hardware queues but only a global GPU
reset. This leads to extra complexity when we need to synchronize timeout
works with the reset work. One solution to address that is to have an
ordered workqueue at the driver level that will be used by the different
schedulers to queue their timeout work. Thanks to the serialization
provided by the ordered workqueue we are guaranteed that timeout
handlers are executed sequentially, and can thus easily reset the GPU
from the timeout handler without extra synchronization.
v5:
* Add a new paragraph to the timedout_job() method
v3:
* New patch
v4:
* Actually use the timeout_wq to queue the timeout work
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Emma Anholt <emma@anholt.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-3-boris.brezillon@collabora.com
Use amdgpu_ucode_name to show ucode name and psp_gfx_cmd_name to
show psp_gfx_cmd name in psp_cmd_submit_buf.
v2: adjust function name
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement function psp_gfx_cmd_name to show cmd name
via cmd id.
v2: rename it to psp_gfx_cmd_name
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement function amdgpu_ucode_name to show ucode name
via ucode id.
v2: rename it to amdgpu_ucode_name
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Was missing. Add it.
Fixes: 6b36fa6143 ("drm/amdgpu: add umc v8_7_0 IP headers")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 6b36fa6143 ("drm/amdgpu: add umc v8_7_0 IP headers") adds the new
file ./drivers/gpu/drm/amd/include/asic_reg/umc/umc_8_7_0_sh_mask.h with
DOS line endings, which is very uncommon for the kernel repository.
Rectify the line endings in this file with dos2unix.
Identified by a checkpatch evaluation on the whole kernel repository and
spot-checking for really unexpected checkpatch rule violations.
Reported-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Simplify Aldebaran managed I2C transfer function
to correctly play with the upper I2C layers.
This gets it in line with Navi10, Acturus, and
Sienna Cichlid.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On long transfers to the EEPROM device,
i.e. write, it is observed that the driver aborts
the transfer.
The reason for this is that the driver isn't
patient enough--the IC_STATUS register's contents
is 0x27, which is MST_ACTIVITY | TFE | TFNF |
ACTIVITY. That is, while the transmission FIFO is
empty, we, the I2C master device, are still
driving the bus.
Implement the correct procedure to disable
the block, as described in the DesignWare I2C
Databook, section 3.8.3 Disabling DW_apb_i2c on
page 56. Now there are no premature aborts on long
data transfers.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In smu_v11_0_i2c_transmit() use a single loop to
transmit bytes, instead of two nested loops.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Debugfs RAS EEPROM files are available when
the ASIC supports RAS, and when the debugfs is
enabled, an also when "ras_enable" module
parameter is set to 0. However in this case,
we get a kernel oops when accessing some of
the "ras_..." controls in debugfs. The reason
for this is that struct amdgpu_ras::adev is
unset. This commit sets it, thus enabling access
to those facilities. Note that this facilitates
EEPROM access and not necessarily RAS features or
functionality.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pos is 64 bits.
Fixes: c65b0805e7 ("drm/amdgpu: RAS EEPROM table is now in debugfs")
Cc: luben.tuikov@amd.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Split functionality between read and write, which
simplifies the code and exposes areas of
optimization and more or less complexity, and take
advantage of that.
Read and write the table in one go; use a separate
stage to decode or encode the data, as opposed to
on the fly, which keeps the I2C bus busy. Use a
single read/write to read/write the table or at
most two if the number of records we're
reading/writing wraps around.
Check the check-sum of a table in EEPROM on init.
Update the checksum at the same time as when
updating the table header signature, when the
threshold was increased on boot.
Take advantage of arithmetic modulo 256, that is,
use a byte!, to greatly simplify checksum
arithmetic.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The code is now tested from userspace.
Remove already macroed out test function.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Qualify with "ras_". Use kernel's own--don't
redefine your own.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
buff --> buf. Essentially buffer abbreviates to
buf, remove 1/2 of it, or just the iron part, as
opposed to just the Er,
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RAS_MAX_RECORD_NUM may mean the maximum record
number, as in the maximum house number on your
street, or it may mean the maximum number of
records, as in the count of records, which is also
a number. To make this distinction whether the
number is ordinal (index) or cardinal (count),
rename this macro to RAS_MAX_RECORD_COUNT.
This makes it easy to understand what it refers
to, especially when we compute quantities such as,
how many records do we have left in the table,
especially when there are so many other numbers,
quantities and numerical macros around.
Also rename the long,
amdgpu_ras_eeprom_get_record_max_length() to the
more succinct and clear,
amdgpu_ras_eeprom_max_record_count().
When computing the threshold, which also deals
with counts, i.e. "how many", use cardinal
"max_eeprom_records_count", than the quantitative
"max_eeprom_records_len".
Simplify the logic here and there, as well.
Cc: Guchun Chen <guchun.chen@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename update_table_header() to
write_table_header() as this function is actually
writing it to EEPROM.
Use kernel types; use u8 to carry around the
checksum, in order to take advantage of arithmetic
modulo 8-bits (256).
Tidy up to 80 columns.
When updating the checksum, just recalculate the
whole thing.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to account for the 2 bytes of EEPROM
address--this is now well abstracted away by
the fixes the the lower layers.
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The low level EEPROM write method, doesn't return
1, but the number of bytes written. Thus do not
compare to 1, instead, compare to greater than 0
for success.
Other cleanup: if the lower layers returned
-errno, then return that, as opposed to
overwriting the error code with one-fits-all
-EINVAL. For instance, some return -EAGAIN.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The I2C address is kept as a 16-bit quantity in
the kernel. The I2C_TAR::I2C_TAR field is 10-bit
wide.
Fix the width of the I2C address for Vega20 from 8
bits to 16 bits to accommodate the full spectrum
of I2C address space.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that we have an I2C quirk table for
SMU-managed I2C controllers, the I2C core does the
checks for us, so we don't need to do them, and so
simplify the managed I2C transfer functions.
Also, for Arcturus and Navi10, fix setting the
command type from "cmd->CmdConfig" to "cmd->Cmd".
The latter is what appears to be taking in
the enumeration I2C_CMD_... as an integer,
not a bit-flag.
For Sienna, the "Cmd" field seems to have been
eliminated, and command type and flags all live in
the "CmdConfig" field--this is left untouched.
Fix: Detect and add changing of direction
bit-flag, as this is necessary for the SMU to
detect the direction change in the 1-d array of
data it gets.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extend the I2C quirk table for SMU access
controlled I2C adapters. Let the kernel I2C layer
check that the messages all have the same address,
and that their combined size doesn't exceed the
maximum size of a SMU software I2C request.
Suggested-by: Jean Delvare <jdelvare@suse.de>
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wrap amdgpu_ras_eeprom_xfer(..., bool write),
into amdgpu_ras_eeprom_read() and
amdgpu_ras_eeprom_write(), as that makes reading
and understanding the code clearer.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of fixing the spelling in
amdgpu_ras_eeprom_process_recods(),
rename it to,
amdgpu_ras_eeprom_xfer(),
to look similar to other I2C and protocol
transfer (read/write) functions.
Also to keep the column span to within reason by
using a shorter name.
Change the "num" function parameter from "int" to
"const u32" since it is the number of items
(records) to xfer, i.e. their count, which cannot
be a negative number.
Also swap the order of parameters, keeping the
pointer to records and their number next to each
other, while the direction now becomes the last
parameter.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_ras_eeprom.c--the interface from RAS to
EEPROM, rename macros from EEPROM to RAS, to
indicate that the quantities and objects are RAS
specific, not EEPROM. We can decrease the RAS
table, or put it in different offset of EEPROM as
needed in the future.
Remove EEPROM_ADDRESS_SIZE macro definition, equal
to 2, from the file and calculations, as that
quantity is computed and added on the stack,
in the lower layer, amdgpu_eeprom_xfer().
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the auto-discoverable class of I2C bus to
HWMON. Remove SPD.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the size of the EEPROM from 256000 bytes
to 262144 bytes (256 KiB).
Fix a couple or wrap around bugs. If a valid
value/address is 0 <= addr < size, the inverse of
this inequality (barring negative values which
make no sense here) is addr >= size. Fix this in
the RAS code.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert RAS and FRU code to use the 19-bit I2C
memory address and remove all "slave_addr", as
this is now absolved into the 19-bit address.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: John Clements <john.clements@amd.com>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* "eeprom_addr" is now 32-bit wide.
* Remove "slave_addr" from the I2C EEPROM driver
interface. The I2C EEPROM Device Type Identifier
is fixed at 1010b, and the rest of the bits
of the Device Address Byte/Device Select Code,
are memory address bits, where the first three
of those bits are the hardware selection bits.
All this is now a 19-bit address and passed
as "eeprom_addr". This abstracts the I2C bus
for EEPROM devices for this I2C EEPROM driver.
Now clients only pass the 19-bit EEPROM memory
address, to the I2C EEPROM driver, as the 32-bit
"eeprom_addr", from which they want to read from
or write to.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Consult the i2c_adapter.quirks table for
the maximum read/write data length per bus
transaction. Do not exceed this transaction
limit.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* When reading from the EEPROM device, there is no
device limitation on the number of bytes
read--they're simply sequenced out. Thus, read
the whole data requested in one go.
* When writing to the EEPROM device, there is a
256-byte page limit to write to before having to
generate a STOP on the bus, as well as the
address written to mustn't cross over the page
boundary (it actually rolls over). Maximize the
data written to per bus acquisition.
* Return the number of bytes read/written, or -errno.
* Add kernel doc.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Teach Vega20 I2C to be agnostic. Allow addressing
different devices while the master holds the bus.
Set STOP as per the controller's specification.
v2: Qualify generating ReSTART before the 1st byte
of the message, when set by the caller, as
those functions are separated, as caught by
Andrey G.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To be used by kernel clients of the adapter.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Lazar Lijo <Lijo.Lazar@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix from number of processed bytes to number of
processed I2C messages.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Let's just ignore the I2C_M_STOP hint from upper
layer for SMU I2C code as there is no clean
mapping between single per I2C message STOP flag
at the kernel I2C layer and the SMU, per each byte
STOP flag. We will just by default set it at the
end of the SMU I2C message.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Lazar Lijo <Lijo.Lazar@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also generilize the code to accept and translate to
HW bits any I2C relvent flags both for read and write.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
EEPROM spec requests this.
v2: Only to be done for write data transactions.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Not sure that this really matters that much, but these could
have various other hwmon chips on them.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Use the new helper rather than doing i2c transfers directly.
v2: fix typo
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Use the new helper rather than doing i2c transfers directly.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Encapsulates the i2c protocol handling so other parts of the
driver can just tell it the offset and size of data to write.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
And handle more than just EEPROMs.
v2: fix restart handling between transactions.
v3: handle 7 to 8 bit addr conversion
v4: Fix &req --> req. (Luben T)
v5: squash in i2c channel fix
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Make it generic so we can support more than just EEPROMs.
v2: fix restart handling between transactions.
v3: handle 7 to 8 bit addr conversion
v4: Fix &req --> req. (Luben T)
v5: squash in i2c channel fix
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Make it generic so we can support more than just EEPROMs.
v2: fix restart handling between transactions.
v3: handle 7 to 8 bit addr conversion
v4: Fix &req --> req. (Luben T)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
So we lock software as well as hardware access to the bus.
v2: fix mutex handling.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Reset SDMA RAS error counts during init only if persistent
EDC harvesting is not supported.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Each zone-device page holds a reference to the SVM BO that manages its
backing storage. This is necessary to correctly hold on to the BO in
case zone_device pages are shared with a child-process.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is for debug purposes only.
It conditionally generates partial migrations to test mixed
CPU/GPU memory domain pages in a prange easily.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Migration skipped for pages that are already in VRAM
domain. These could be the result of previous partial
migrations to SYS RAM, and prefetch back to VRAM.
Ex. Coherent pages in VRAM that were not written/invalidated after
a copy-on-write.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Invalid pages can be the result of pages that have been migrated
already due to copy-on-write procedure or pages that were never
migrated to VRAM in first place. This is not an issue anymore,
as pranges now support mixed memory domains (CPU/GPU).
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
svm ranges can have mixed pages from device or system memory.
A good example is, after a prange has been allocated in VRAM and a
copy-on-write is triggered by a fork. This invalidates some pages
inside the prange. Endding up in mixed pages.
[How]
By classifying each page inside a prange, based on its type. Device or
system memory, during dma mapping call. If page corresponds
to VRAM domain, a flag is set to its dma_addr entry for each GPU.
Then, at the GPU page table mapping. All group of contiguous pages within
the same type are mapped with their proper pte flags.
v2:
Instead of using ttm_res to calculate vram pfns in the svm_range. It is now
done by setting the vram real physical address into drm_addr array.
This makes more flexible VRAM management, plus removes the need to have
a BO reference in the svm_range.
v3:
Remove mapping member from svm_range
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that prange could have mixed domains (VRAM or SYSRAM),
actual_loc nor svm_bo can not be used to check its current
domain and eventually get its pfns to map them in GPU.
Instead, pfns from both domains, are now obtained from
hmm_range_fault through amdgpu_hmm_range_get_pages
call. This is done everytime a GPU map occur.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Get the proper owner reference for amdgpu_hmm_range_get_pages function.
This is useful for partial migrations. To avoid migrating back to
system memory, VRAM pages, that are accessible by all devices in the
same memory domain.
Ex. multiple devices in the same hive.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
svm_range_prefault is called right before migrations to VRAM,
to make sure pages are resident in system memory before the migration.
With partial migrations, this reference is used by hmm range get pages
to avoid migrating pages that are already in the same VRAM domain.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The parameter is used in the dev_private_owner to decide if device
pages in the range require to be migrated back to system memory, based
if they are or not in the same memory domain.
In this case, this reference could come from the same memory domain
with devices connected to the same hive.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GPUs in the same XGMI hive have direct access to all
members'VRAM. When mapping memory to a GPU, we don't need
hmm_range_fault to fault device-private pages in the same
hive back to the host. Identifying the page owner as the hive,
rather than the individual GPU, accomplishes this.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During GPU page table invalidation with xnack off, new ranges
split may occur concurrently in the same prange. Creating a new
child per split. Each child should also increment its
invalid counter, to assure GPU page table updates in these
ranges.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Extend existing support for DCN2.1 DMUB diagnostic logging to
DCN3.1 so we can collect useful information if the DMUB hangs.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Navi series GPUs have 2 SIMDs per CU (and then 2 CUs per WGP).
The NV enum headers incorrectly listed this as 4, which later meant
we were incorrectly reporting the number of SIMDs in the HSA
topology. This could cause problems down the line for user-space
applications that want to launch a fixed amount of work to each
SIMD.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The documentation around PrepareMp1ForUnload message says that
anything sent to SMU after this command would be stalled as the
PMFW would not be in a state to take further job requests.
Technically this is right in case of S3 scenario. But, this might
not be the case during s0ix as the PMC driver would be the last
to send the SMU on the OS_HINT. If SMU gets a PrepareMp1ForUnload
message before the OS_HINT, this would stall the entire S0ix process.
Results show that, this message to SMU is not required during S0ix
and hence skip it.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In some asics, we need to adjust the behavior according to the apu flags
at very early stage.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Setting CONFIG_FRAME_WARN=0 should disable 'stack frame larger than'
warnings. This is useful for example in KASAN builds. Make the dml
Makefile respect this config.
Fixes the following build warnings with CONFIG_KASAN=y and
CONFIG_FRAME_WARN=0:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/display_mode_vba_30.c:3642:6:
warning: stack frame size of 2216 bytes in function
'dml30_ModeSupportAndSystemConfigurationFull' [-Wframe-larger-than=]
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:3957:6:
warning: stack frame size of 2568 bytes in function
'dml31_ModeSupportAndSystemConfigurationFull' [-Wframe-larger-than=]
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Reka Norman <rekanorman@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
radeon_user_framebuffer_create() misses to call drm_gem_object_put() in
an error path. Add the missed function call to fix it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Also copy over the part that makes old gcc handling cross-platform.
Fixes: df7a1658f2 ("drm/amdgpu/dc: fix DCN3.1 Makefile for PPC64")
Fixes: 926d6972ef ("drm/amd/display: Add DCN3.1 blocks to the DC Makefile")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On the Loongson64 platform used with Radeon GPU, shutdown or reboot failed
when console=tty is in the boot cmdline.
radeon_suspend_kms() puts the hw in the suspend state, especially set fb
state as FBINFO_STATE_SUSPENDED:
if (fbcon) {
console_lock();
radeon_fbdev_set_suspend(rdev, 1);
console_unlock();
}
Then avoid to do any more fb operations in the related functions:
if (p->state != FBINFO_STATE_RUNNING)
return;
So call radeon_suspend_kms() in radeon_pci_shutdown() for Loongson64 to fix
this issue, it looks like some kind of workaround like powerpc.
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The ttm caching flags (ttm_cached, ttm_write_combined etc) are
used to determine a buffer object's mapping attributes in both
CPU page table and GPU page table (when that buffer is also
accessed by GPU). Currently the ttm caching flags are set in
function amdgpu_ttm_io_mem_reserve which is called during
DRM_AMDGPU_GEM_MMAP ioctl. This has a problem since the GPU
mapping of the buffer object (ioctl DRM_AMDGPU_GEM_VA) can
happen earlier than the mmap time, thus the GPU page table
update code can't pick up the right ttm caching flags to
decide the right GPU page table attributes.
This patch moves the ttm caching flags setting to function
amdgpu_vram_mgr_new - this function is called during the
first step of a buffer object create (eg, DRM_AMDGPU_GEM_CREATE)
so the later both CPU and GPU mapping function calls will
pick up this flag for CPU/GPU page table set up.
v2: rebase (Alex)
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Suggested-by: Christian Koenig <Christian.Koenig@amd.com>
Reviewed-by: Christian Koenig <Christian.Koenig@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Tested-by: Po Huang <Po.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During GPU reset, when receiving a DMCUB OUTBUX0 interrupt,
DAL code will set it to be OUTBOX interrupt and sets hw interrupt.
However, OUTBOX interrupt is not registered yet, so a NULL pointer
access will be executed.
Call Trace:
dal_irq_service_set+0x30/0x90 [amdgpu]
dc_interrupt_set+0x24/0x30 [amdgpu]
amdgpu_dm_set_dmub_outbox_irq_state+0x22/0x30 [amdgpu]
amdgpu_irq_update+0x77/0xa0 [amdgpu]
amdgpu_irq_gpu_reset_resume_helper+0x67/0xa0 [amdgpu]
amdgpu_do_asic_reset+0x219/0x260 [amdgpu]
amdgpu_device_gpu_recover.cold+0x8c5/0xb64 [amdgpu]
amdgpu_debugfs_gpu_recover_show+0x2c/0x60 [amdgpu]
seq_read_iter+0xc2/0x450
? do_anonymous_page+0x22c/0x3b0
seq_read+0xf9/0x140
full_proxy_read+0x5c/0x90
vfs_read+0xaa/0x190
ksys_read+0x67/0xe0
__x64_sys_read+0x1a/0x20
Fixes: effbf6ca7e ("drm/amdgpu/display: remove an old DCN3 guard")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-and-tested-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
valid DAL irq should be < DAL_IRQ_SOURCES_NUMBER.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-and-tested-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Without driver loaded, SDMA0_UTCL1_PAGE.TMZ_ENABLE is set to 1
by default for all asic. On Raven/Renoir, the sdma goldsetting
changes SDMA0_UTCL1_PAGE.TMZ_ENABLE to 0.
This patch restores SDMA0_UTCL1_PAGE.TMZ_ENABLE to 1.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The __assign_str macro has an unusual ending semicolon but the vast
majority of uses of the macro already have semicolon termination.
$ git grep -P '\b__assign_str\b' | wc -l
551
$ git grep -P '\b__assign_str\b.*;' | wc -l
480
Add semicolons to the __assign_str() uses without semicolon termination
and all the other uses without semicolon termination via additional defines
that are equivalent to __assign_str() with the eventual goal of removing
the semicolon from the __assign_str() macro definition.
Link: https://lore.kernel.org/lkml/1e068d21106bb6db05b735b4916bb420e6c9842a.camel@perches.com/
Link: https://lkml.kernel.org/r/48a056adabd8f70444475352f617914cef504a45.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
radeon_ttm_bo_destroy() is attempting to access the resource object to
update memory counters. However, the resource object is already freed when
ttm calls this function via the destroy callback. This causes an oops when
a bo is freed:
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:radeon_ttm_bo_destroy+0x2c/0x100 [radeon]
Call Trace:
radeon_bo_unref+0x1a/0x30 [radeon]
radeon_gem_object_free+0x33/0x50 [radeon]
drm_gem_object_release_handle+0x69/0x70 [drm]
drm_gem_handle_delete+0x62/0xa0 [drm]
? drm_mode_destroy_dumb+0x40/0x40 [drm]
drm_ioctl_kernel+0xb2/0xf0 [drm]
drm_ioctl+0x30a/0x3c0 [drm]
? drm_mode_destroy_dumb+0x40/0x40 [drm]
radeon_drm_ioctl+0x49/0x80 [radeon]
__x64_sys_ioctl+0x8e/0xd0
Avoid the issue by updating the counters in the delete_mem_notify callback
instead. Also, fix memory statistic updating in radeon_bo_move() to
identify the source type correctly. The source type needs to be saved
before the move, because the moved from object may be altered by the move.
Fixes: bfa3357ef9 ("drm/ttm: allocate resource object instead of embedding it v2")
Signed-off-by: Mikel Rychliski <mikel@mikelr.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624045121.15643-1-mikel@mikelr.com
radeon_ttm_bo_destroy() is attempting to access the resource object to
update memory counters. However, the resource object is already freed when
ttm calls this function via the destroy callback. This causes an oops when
a bo is freed:
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:radeon_ttm_bo_destroy+0x2c/0x100 [radeon]
Call Trace:
radeon_bo_unref+0x1a/0x30 [radeon]
radeon_gem_object_free+0x33/0x50 [radeon]
drm_gem_object_release_handle+0x69/0x70 [drm]
drm_gem_handle_delete+0x62/0xa0 [drm]
? drm_mode_destroy_dumb+0x40/0x40 [drm]
drm_ioctl_kernel+0xb2/0xf0 [drm]
drm_ioctl+0x30a/0x3c0 [drm]
? drm_mode_destroy_dumb+0x40/0x40 [drm]
radeon_drm_ioctl+0x49/0x80 [radeon]
__x64_sys_ioctl+0x8e/0xd0
Avoid the issue by updating the counters in the delete_mem_notify callback
instead. Also, fix memory statistic updating in radeon_bo_move() to
identify the source type correctly. The source type needs to be saved
before the move, because the moved from object may be altered by the move.
Fixes: bfa3357ef9 ("drm/ttm: allocate resource object instead of embedding it v2")
Signed-off-by: Mikel Rychliski <mikel@mikelr.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624045121.15643-1-mikel@mikelr.com
which lack was breaking ADL-P with media stack.
Besides that a small selftest fix and a theoretical overflow on
i915->pipe_to_crtc_mapping.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmDbbG8ACgkQ+mJfZA7r
E8pr0AgAr/M7Mv+U53yPIO6vz4IUN6jT63A5j5agS5CG8NMLrS72WVfDoMH9o3vU
vIX94Evx3EAmhyt4v54Knojt1LakBOceHEzeK9+Outa8fSjikvUnppucUSPrZXjM
DSzrf737ZX45SDtowbDC13Dh4FJZ8yWWC11Im20G7dUVCtYH6ECR4WJcLKJ7f6el
mcMuCjpOV9kzxOVPkLL8jzfAoZ/3CiklceAVQimmVvlf7VgzExnFEz+8fwXF5bAC
Vjx+Hpx28CT516tKdsD1KX2u+JPtHIXREIXnLGeZH3lV2b9KvDezsUEDziuEl3/+
fGDZwJXCMbgTCcw6gDya/lZjIXJp5g==
=X/yj
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-fixes-2021-06-29' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
The biggest fix is the restoration of mmap ioctl for gen12 integrated parts
which lack was breaking ADL-P with media stack.
Besides that a small selftest fix and a theoretical overflow on
i915->pipe_to_crtc_mapping.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YNtsfguvCRSROBUZ@intel.com
* amdgpu: Fix test for allocation failures
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmDUMQsACgkQaA3BHVML
eiNZeQf/Qs8J69XbEUEZ8FvqBbu/4vUr+nREvG69KZsb9oZnUK5Q40GA1IqDt2ig
vl9DL84ZXpjX2/dwRock2KuZEAC7OO1XWnbQVWn6IGIc38G4RPMfiwLsF+g2Xqot
mxIZ98wlHdQfJAaAsW5ftjI9pr4yos+Ldo+X6yfzD7zm9KD9VNTJc6oTg/hiAD9Q
4YeNBMSeRtFoWgLYegQJUkDZTLN8PdweBkxptQswid9C3yrbAtUKfcbuALFuIvm3
8mDDI/ZV8j0UlJvIYtZPd9PPEkd4iSwG1sjlq+C5e4Vg+cPQmPzdYyPsnkCn/om9
qTS1Bsb6sBQDHlnNvcHCEMrtKXnCtA==
=HHZQ
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2021-06-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Short summary of fixes pull:
* amdgpu: Fix test for allocation failures
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YNQxVybBGdjLMUQJ@linux-uq9g
This reverts commit 33f409e60e.
The patch that we are reverting here was originally applied because it
fixes multiple IGT issues and flickering in Android. However, after a
discussion with Sean Paul and Mark, it looks like that this patch might
cause problems on ChromeOS. For this reason, we decided to revert this
patch.
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Mark Yacoub <markyacoub@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Added the Beige Goby capabilities in codec query.
v2: fix build error and indent (James)
Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The tmz functions are verified on yellow carp. So enable it by
default.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add helper function to get process device data structure from adev to
update counters.
Update vm faults, page_in, page_out counters will no be executed in
parallel, use WRITE_ONCE to avoid any form of compiler optimizations.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is part of SVM profiling API, export sysfs counters for
per-process, per-GPU vm retry fault, pages migrated in and out of GPU vram.
counters will not be updated in parallel in GPU retry fault handler and
migration to vram/ram path, use READ_ONCE to avoid compiler
optimization.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 cases of kobj leak, which causes memory leak:
kobj_type must have release() method to free memory from release
callback. Don't need NULL default_attrs to init kobj.
sysfs files created under kobj_status should be removed with kobj_status
as parent kobject.
Remove queue sysfs files when releasing queue from process MMU notifier
release callback.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functionality change. Modify kfd_sysfs_create_file to use kobject as
parameter, so it becomes common helper function to remove duplicate code
and will simplify new kfd sysfs file create in future.
Move pr_warn to helper function if sysfs file create failed. Set helper
function as void return because caller doesn't use the helper function
return value.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clock gating setting is still performed even when the corresponding
CG feature is not supported. And the tricky part is disablement is
actually performed no matter for enablement or disablement request.
That seems not logically right.
Considering HW should already properly take care of the CG state, we
will just skip the corresponding clock gating setting when the feature
is not supported.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU had set all the necessary fields for a link width switch
but the width switch wasn't occurring because the link was idle
in the L1 state. Setting LC_L1_RECONFIG_EN=0x1 will allow width
switches to also be initiated while in L1 instead of waiting until
the link is back in L0.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
A lot of NAK-G being generated when link widht switching is happening.
WA for this issue is to program the SPC to 4 symbols per clock during
bootup when the native PCIE width is x4.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Fix TCP hang when a lightweight invalidation happens on Navi1x.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add missing settings for SQC bits. And correct some confusing logics
around active wgp bitmap calculation.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When unloading driver, if VCN is powered on, sending message
DisableAllSmuFeatures to SMU will cause SMU hang. We need to
power down VCN and JPEG before clean up SMU.
Signed-off-by: Chengzhe Liu <ChengZhe.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Sometimes, DP receiver chip power-controlled externally by an
Embedded Controller could be treated and used as eDP,
if it drives mobile display. In this case,
we shouldn't be doing power-sequencing, hence we can skip
waiting for T7-ready and T9-ready."
[How]
Added a feature mask to enable eDP no power sequencing feature.
To enable this, set 0x10 flag in amdgpu.dcfeaturemask on
Linux command line.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge misc updates from Andrew Morton:
"191 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, kernel/watchdog, and mm (gup, pagealloc, slab,
slub, kmemleak, dax, debug, pagecache, gup, swap, memcg, pagemap,
mprotect, bootmem, dma, tracing, vmalloc, kasan, initialization,
pagealloc, and memory-failure)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (191 commits)
mm,hwpoison: make get_hwpoison_page() call get_any_page()
mm,hwpoison: send SIGBUS with error virutal address
mm/page_alloc: split pcp->high across all online CPUs for cpuless nodes
mm/page_alloc: allow high-order pages to be stored on the per-cpu lists
mm: replace CONFIG_FLAT_NODE_MEM_MAP with CONFIG_FLATMEM
mm: replace CONFIG_NEED_MULTIPLE_NODES with CONFIG_NUMA
docs: remove description of DISCONTIGMEM
arch, mm: remove stale mentions of DISCONIGMEM
mm: remove CONFIG_DISCONTIGMEM
m68k: remove support for DISCONTIGMEM
arc: remove support for DISCONTIGMEM
arc: update comment about HIGHMEM implementation
alpha: remove DISCONTIGMEM and NUMA
mm/page_alloc: move free_the_page
mm/page_alloc: fix counting of managed_pages
mm/page_alloc: improve memmap_pages dbg msg
mm: drop SECTION_SHIFT in code comments
mm/page_alloc: introduce vm.percpu_pagelist_high_fraction
mm/page_alloc: limit the number of pages on PCP lists when reclaim is active
mm/page_alloc: scale the number of pages that are batch freed
...
Use vma_lookup() to find the VMA at a specific address. As vma_lookup()
will return NULL if the address is not within any VMA, the start address
no longer needs to be validated.
Link: https://lkml.kernel.org/r/20210521174745.2219620-14-Liam.Howlett@Oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
vma_lookup() will look up the vma at a specific address. find_vma() will
start the search for a specific address and continue upwards. This fixes
an issue with the selftest as the returned vma may not be the newly
created vma, but simply the vma at a higher address.
objects
Link: https://lkml.kernel.org/r/20210521174745.2219620-3-Liam.Howlett@Oracle.com
Fixes: 6fedafacae (drm/i915/selftests: Wrap vm_mmap() around GEM
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in zte.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-28-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in xlnx.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-27-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in vmxgfx. All usage of
the field within vmwgfx can safely be removed.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-26-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in vkms.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-25-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in vc4.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-24-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't use it in tidss.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-23-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in tegra.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-22-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in sun4i.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-21-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in stm.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Yannick Fertre <yannick.fertre@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-20-tzimmermann@suse.de
Return early for non-TTM_PL_TT BOs so that we don't pass
wrong pointer to amdgpu_gtt_mgr_has_gart_addr() which assumes
ttm_resource argument to be TTM_PL_TT type BO's.
v3: remove extra braces.
v2: merge if-conditions.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210629114413.3371-1-nirmoy.das@amd.com
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in sti.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-19-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in rockchip.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-18-tzimmermann@suse.de
Replace usage of struct drm_device.irq_enabled with the driver's
own state field struct omap_drm_device.irq_enabled. The field in
the DRM device structure is considered legacy and should not be
used by KMS drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-16-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in nouveau.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-15-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in mediatek.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-14-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in dcss.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-13-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in imx.
v3:
* move dcss changes into separate patch (Laurentiu)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-12-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in kirin.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-11-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in exynos.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-10-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in malidp.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-9-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in komeda.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-8-tzimmermann@suse.de
Replace usage of struct drm_device.irq_enabled with the driver's
own state field struct drm_i915_private.irq_enabled. The field in
the DRM device structure is considered legacy and should not be
used by KMS drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-7-tzimmermann@suse.de
For KMS drivers, replace the IRQ check in VBLANK ioctls with a check for
vblank support. IRQs might be enabled wthout vblanking being supported.
This change also removes the DRM framework's only dependency on IRQ state
for non-legacy drivers. For legacy drivers with userspace modesetting,
the original test remains in drm_wait_vblank_ioctl().
v4:
* avoid preprocessor ifdef in drm_wait_vblank_ioctl()
(Jani, Thierry)
v3:
* optimize test in drm_wait_vblank_ioctl() for KMS case (Liviu)
* update docs for drm_irq_uninstall()
v2:
* keep the old test for legacy drivers in
drm_wait_vblank_ioctl() (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-5-tzimmermann@suse.de
Replace usage of struct drm_device.irq_enabled with the driver's
own state field struct radeon_device.irq.installed. The field in
the DRM device structure is considered legacy and should not be
used by KMS drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-4-tzimmermann@suse.de
Remove the check around drm_irq_uninstall(). The same test is
done by the function internally. The tested state in irq_enabled
is considered obsolete and should not be used by KMS drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-3-tzimmermann@suse.de
Replace usage of struct drm_device.irq_enabled with the driver's
own state field struct amdgpu_device.irq.installed. The field in
the DRM device structure is considered legacy and should not be
used by KMS drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-2-tzimmermann@suse.de
Hi Linus,
Please, pull the following patches that fix many fall-through warnings
when building with Clang 12.0.0 and this[1] change reverted. Notice
that in order to enable -Wimplicit-fallthrough for Clang, such change[1]
is meant to be reverted at some point. So, these patches help to move
in that direction.
Thanks!
[1] commit e2079e93f5 ("kbuild: Do not enable -Wimplicit-fallthrough for clang for now")
-----BEGIN PGP SIGNATURE-----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=Kt2q
-----END PGP SIGNATURE-----
Merge tag 'fallthrough-fixes-clang-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fallthrough fixes from Gustavo Silva:
"Fix many fall-through warnings when building with Clang 12.0.0 and
'-Wimplicit-fallthrough' so that we at some point will be able to
enable that warning by default"
* tag 'fallthrough-fixes-clang-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (26 commits)
rxrpc: Fix fall-through warnings for Clang
drm/nouveau/clk: Fix fall-through warnings for Clang
drm/nouveau/therm: Fix fall-through warnings for Clang
drm/nouveau: Fix fall-through warnings for Clang
xfs: Fix fall-through warnings for Clang
xfrm: Fix fall-through warnings for Clang
tipc: Fix fall-through warnings for Clang
sctp: Fix fall-through warnings for Clang
rds: Fix fall-through warnings for Clang
net/packet: Fix fall-through warnings for Clang
net: netrom: Fix fall-through warnings for Clang
ide: Fix fall-through warnings for Clang
hwmon: (max6621) Fix fall-through warnings for Clang
hwmon: (corsair-cpro) Fix fall-through warnings for Clang
firewire: core: Fix fall-through warnings for Clang
braille_console: Fix fall-through warnings for Clang
ipv4: Fix fall-through warnings for Clang
qlcnic: Fix fall-through warnings for Clang
bnxt_en: Fix fall-through warnings for Clang
netxen_nic: Fix fall-through warnings for Clang
...
Failing to read the MTP over DSI should not bring down the
system and make us bail out from using the display, it turns
out that this happens when toggling the display off and on,
and that write is often still working so the display output
is just fine. Printing an error is enough.
Tested by killing the Gnome session repeatedly on the
Samsung Skomer.
Fixes: 899f24ed8d ("drm/panel: Add driver for Novatek NT35510-based panels")
Cc: Stephan Gerhold <stephan@gerhold.net>
Reported-by: newbyte@disroot.org
Acked-by: Stefan Hansson <newbyte@disroot.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603231830.3200040-1-linus.walleij@linaro.org
Reinstate the mmap ioctl for all current integrated platforms.
The intention was really to have it disabled for discrete graphics
where we enforce a single mmap mode.
This was reported to break ADL-P with the media stack, which was not the
intention. Although longer term we do still plan to sunset this ioctl
even for integrated, in favour of using mmap_offset instead.
Fixes: 35cbd91eb5 ("drm/i915: Disable mmap ioctl for gen12+")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624112914.311984-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit d3f3baa356)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add a single point of truth for figuring out the primary/secondary crtc
for bigjoiner instead of duplicating the magic pipe +/- 1 in multiple
places.
Also fix the pipe validity checks to properly take non-contiguous pipes
into account. The current checks may theoretically overflow
i915->pipe_to_crtc_mapping[pipe], albeit with a warning, due to fused
off pipes, as INTEL_NUM_PIPES() returns the actual number of pipes on
the platform, and the check is for INTEL_NUM_PIPES() == pipe + 1.
Prefer primary/secondary terminology going forward.
v2:
- Improved abstractions for pipe validity etc.
Fixes: 8a029c113b ("drm/i915/dp: Modify VDSC helpers to configure DSC for Bigjoiner slave")
Fixes: d961eb20ad ("drm/i915/bigjoiner: atomic commit changes for uncompressed joiner")
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Manasi Navare <manasi.dl.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610090528.20511-1-jani.nikula@intel.com
(cherry picked from commit 17203224f0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The panfrost driver tries to kill in-flight jobs on FD close after
destroying the FD scheduler entities. For this to work properly, we
need to make sure the jobs popped from the scheduler entities have
been queued at the HW level before declaring the entity idle, otherwise
we might iterate over a list that doesn't contain those jobs.
Suggested-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624140850.2229697-1-boris.brezillon@collabora.com
Since we are already loop through the levels to sanitize them, mark what
is the real max_level so it can be used in subsequent loop. This makes
it simpler to later add the adjustment latency to "valid levels". No
change in behavior, just makes the code easier to follow.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622212210.3746133-2-lucas.demarchi@intel.com
We should no longer increment level 0 by 1usec when we have 16Gb DIMMs.
Instead spec says to add 3usec (as opposed to 2) to each valid level
when punit replies 0 to level 0.
So set wm_lv_0_adjust_needed to false for DISPLAY_VER() >= 12 and set
the proper adjustment value when handling WaWmMemoryReadLatency.
Bspec: 49326, 4381
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622212210.3746133-1-lucas.demarchi@intel.com
PSR2 is not compatible with DC3CO or VRR in this stepping, so not
enabling PSR2 if VRR will be enabled or not enabling DC3CO if PSR2 is
possible.
BSpec: 54369
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616203158.118111-5-jose.souza@intel.com
In some modes there is not enough time during hblank to transmit PSR2
SDP plus the pixels CRC SDP, if such case happens PSR2 needs to be
disabled.
But eDP spec 1.4b allows to transmit PSR2 SDP in a prior scanline
alone and than later the CRC SDP, allowing PSR2 to be enabled in
those hblank constrained modes.
BSpec: 49274
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616203158.118111-4-jose.souza@intel.com
The PSR2_CTL io buffer wake and fast wake values do not match
expected in pre production hardware, so here adding a table that
matches with HW to program it with values that HW expect.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616203158.118111-2-jose.souza@intel.com
We were only handling X and width granularity, what was causing issues
when sink had a granularity different than 4.
While at it, renaming su_x_granularity to su_w_granularity to better
match reality.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616203158.118111-1-jose.souza@intel.com
to wait for a moving fence after pinning the BO for amdgpu, nouveau and
radeon, a crtc and async page flip fix for atmel-hlcdc and a cpu hang
fix for vc4.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYNTXAQAKCRDj7w1vZxhR
xfgKAP9kNJ3Sx/TN64dwYX6nwSSvkw8E7FfDNrCggLyaEn03UQD+N8fMx1oHy3eV
vx517gHHauMbyUZT4OuV/YFN2YEn/QI=
=+lbY
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2021-06-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A DMA address check for nouveau, an error code return fix for kmb, fixes
to wait for a moving fence after pinning the BO for amdgpu, nouveau and
radeon, a crtc and async page flip fix for atmel-hlcdc and a cpu hang
fix for vc4.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624190353.wyizoil3wqrrxz5d@gilmour
Sort out the mess with the local variables in
intel_fbdev_init_bios(). Get rid of all aliasing pointers,
use standard naming/types, and introduce a few more locals
in the loops to avoid the hard to read long struct walks.
While at we also polish the debugs a bit to use the
canonical [CRTC:%d:%s] style.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609085632.22026-6-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Just pass the full atomic state+crtc to the pre-skl watermark
functions, and clean up the types/variable names around the area.
Note that having both .compute_pipe_wm() and .compute_intermediate_wm()
is entirely redundant now. We could unify them to a single vfunc.
But let's do this one step at a time.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609085632.22026-5-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since the llb allocation has a fixed size, let's grab it before
the potentially variable sized cfb. That should avoid some allocation
failure cases once we allow different compression ratios for FBC1.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-10-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Not much point in dynamically allocating the line length
buffer mm node that I can see. Just embed it directly like
we do the for the cfb node. One less failure point to worry
about.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-4-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Goes through all the drivers and deletes the default hook since it's
the default now.
Acked-by: David Lechner <david@lechnology.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Emma Anholt <emma@anholt.net>
Cc: David Lechner <david@lechnology.com>
Cc: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: xen-devel@lists.xenproject.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-14-daniel.vetter@ffwll.ch
It's tedious to review this all the time, and my audit showed that
arcpgu actually forgot to set this.
Make this the default and stop worrying.
Again I sprinkled WARN_ON_ONCE on top to make sure we don't have
strange combinations of hooks: cleanup_fb without prepare_fb doesn't
make sense, and since simpler drivers are all new they better be GEM
based drivers.
v2: Warn and bail when it's _not_ a GEM driver (Noralf)
v3: It's neither ... nor, not not (Sam)
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210623162456.3373469-1-daniel.vetter@ffwll.ch
I guess no one ever tried running omap together with lima or panfrost,
not even sure that's possible. Anyway for consistency, fix this.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Tomi Valkeinen <tomba@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-12-daniel.vetter@ffwll.ch
Like we have for the shadow helpers too, and roll it out to drivers.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-11-daniel.vetter@ffwll.ch
All they do is refcount the fb, which the atomic helpers already do.
This is was necessary with the legacy helpers and I guess just carry
over in the conversion. drm_plane_state always has a full reference
for its ->fb pointer during its entire lifetime,
see __drm_atomic_helper_plane_destroy_state()
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-10-daniel.vetter@ffwll.ch
There's a bunch of atomic drivers who don't do this quite correctly,
luckily most of them aren't in wide use or people would have noticed
the tearing.
By making this the default we avoid the constant audit pain and can
additionally remove a ton of lines from vfuncs for a bit more clarity
in smaller drivers.
While at it complain if there's a cleanup_fb hook but no prepare_fb
hook, because that makes no sense. I haven't found any driver which
violates this, but better safe than sorry.
Subsequent patches will reap the benefits.
v2: It's neither ... nor, not not (Sam)
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210623162200.3372056-1-daniel.vetter@ffwll.ch
Spotted while trying to convert panfrost to these.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-15-daniel.vetter@ffwll.ch
To prepare for making connector creation option, move connector creation
out of ti_sn_bridge_attach to a separate function.
No functional change intended.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624000304.16281-7-laurent.pinchart+renesas@ideasonboard.com
Reorganize the functions in sections, related to connector operations,
bridge operations, AUX adapter, GPIO controller and probe & remove.
This prepares for proper support of DRM_BRIDGE_ATTACH_NO_CONNECTOR that
will add more functions, to ensure that the code will stay readable.
No functional change intended.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624000304.16281-6-laurent.pinchart+renesas@ideasonboard.com
To simplify interfacing with the panel, wrap it in a panel-bridge and
let the DRM bridge helpers handle chaining of operations.
This also prepares for support of DRM_BRIDGE_ATTACH_NO_CONNECTOR, which
requires all components in the display pipeline to be represented by
bridges.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624000304.16281-5-laurent.pinchart+renesas@ideasonboard.com
The valid rates are stored in an array of 8 booleans. Replace it with a
bitmask to save space.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624000304.16281-4-laurent.pinchart+renesas@ideasonboard.com
The enable signal may not be controllable by the kernel. Make it
optional.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624000304.16281-3-laurent.pinchart+renesas@ideasonboard.com
This workaround is specific for a particular panel on Google
chromebook project. When user space daemon enter idle state.
It request adjust brightness to 0, turn backlight_enable signal
off and keep eDP main link active.
On general LCD, this behavior might not be a problem.
But on this panel, its tcon would expect source to execute
full eDP power off sequence after drop backlight_enable signal.
Without eDP power off sequence. Even source try to turn
backlight_enable signal on and restore proper brightness level.
This panel is not able to light on again.
This WA ignored the request from user space daemon to disable
backlight_enable signal and keep it on always. When user space
request kernel to turn eDP display off, kernel driver still
can control backlight_enable signal properly. It would not
impact standard eDP power off sequence.
v2: 1. modify the quirk name and debug messages.
2. unregister backlight.power callback for specific device.
v3: 1. modify debug output messages.
2. use DMI_EXACT_MATCH instead of DMI_MATCH.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624053932.21037-1-shawn.c.lee@intel.com
Jobs can be in-flight when the file descriptor is closed (either because
the process did not terminate properly, or because it didn't wait for
all GPU jobs to be finished), and apparently panfrost_job_close() does
not cancel already running jobs. Let's refcount the MMU context object
so it's lifetime is no longer bound to the FD lifetime and running jobs
can finish properly without generating spurious page faults.
Reported-by: Icecream95 <ixn@keemail.me>
Fixes: 7282f7645d ("drm/panfrost: Implement per FD address spaces")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210621133907.1683899-2-boris.brezillon@collabora.com
* devcoredump support for display errors
* dpu: irq cleanup/refactor
* dpu: dt bindings conversion to yaml
* dsi: dt bindings conversion to yaml
* mdp5: alpha/blend_mode/zpos support
* a6xx: cached coherent buffer support
* a660 support
* gpu iova fault improvements:
- info about which block triggered the fault, etc
- generation of gpu devcoredump on fault
* assortment of other cleanups and fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs4=qsGBBbyn-4JWqW4-YUSTKh67X3DsPQ=T2D9aXKqNA@mail.gmail.com
Currently this has no practial relevance I think because there's not
many who can pull off a setup with panfrost and another gpu in the
same system. But the rules are that if you're setting an exclusive
fence, indicating a gpu write access in the implicit fencing system,
then you need to wait for all fences, not just the previous exclusive
fence.
panfrost against itself has no problem, because it always sets the
exclusive fence (but that's probably something that will need to be
fixed for vulkan and/or multi-engine gpus, or you'll suffer badly).
Also no problem with that against display.
With the prep work done to switch over to the dependency helpers this
is now a oneliner.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-7-daniel.vetter@ffwll.ch
More consistency and prep work for the next patch.
Aside: I wonder whether we shouldn't just move this entire xarray
business into the scheduler so that not everyone has to reinvent the
same wheels. Cc'ing some scheduler people for this too.
v2: Correctly handle sched_lock since Lucas pointed out it's needed.
v3: Rebase, dma_resv_get_excl_unlocked got renamed
v4: Don't leak job references on failure (Steven).
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-6-daniel.vetter@ffwll.ch
drm/scheduler requires a lock between _init and _push_job, but the
reservation lock dance doesn't. So shrink the critical section a
notch.
v2: Lucas pointed out how this should really work, I got it all wrong
in v1.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-5-daniel.vetter@ffwll.ch
Change mgr->available into mgr->used (invert the value).
Makes more sense to do it this way since we don't need the spinlock any
more to double check the handling.
v3 (chk): separated from the TEMPOARAY FLAG change.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622162339.761651-4-andrey.grodzovsky@amd.com
When we run out of GTT we should still be able to evict VRAM->SYSTEM
with a bounce bufferdrm/amdgpu: always allow evicting to SYSTEM domain
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622162339.761651-3-andrey.grodzovsky@amd.com
Currently, we have a limitted GTT memory size and need a bounce buffer
when doing buffer migration between VRAM and SYSTEM domain.
The problem is under GTT memory pressure we can't do buffer migration
between VRAM and SYSTEM domain. But in some cases we really need that.
Eespecially when validating a VRAM backing store BO which resides in
SYSTEM domain.
v2: still account temporary GTT allocations
v3 (chk): revert to the simpler change for now
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622162339.761651-2-andrey.grodzovsky@amd.com
Sometimes drivers need to use bounce buffers to evict BOs. While those reside
in some domain they are not necessarily suitable for CS.
Add a flag so that drivers can note that a bounce buffers needs to be
reallocated during validation.
v2: add detailed comments
v3 (chk): merge commits and rework commit message
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622162339.761651-1-andrey.grodzovsky@amd.com
Problem:
Under memory pressure when GTT domain is almost full multihop assert
will come up when trying to evict LRU BO from VRAM to SYSTEM.
Fix:
Don't assert on multihop error in evict code but rather do a retry
as we do in ttm_bo_move_buffer
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622162339.761651-6-andrey.grodzovsky@amd.com
Instead of using static bandwidth setup, manage bandwidth dynamically,
depending on the amount of allocated planes, their format and
resolution.
Co-developed-with: James Willcox <jwillcox@squareup.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210525131316.3117809-8-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Prior downstream kernels had "fudge factors" in devicetree which would
be applied to things like interconnect bandwidth calculations. Bring
some of those values back here.
Signed-off-by: James Willcox <jwillcox@squareup.com>
[DB: changed _ff to _inefficiency, fixed patch description]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210525131316.3117809-7-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Hook alpha and pixel blend mode support to be exported as proper DRM
plane properties. This allows using this functionality from the
userspace.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210525131316.3117809-5-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use generic helpers code to manage drm_plane_state part of mdp5_plane
state instead of manually coding all the details.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210525131316.3117809-2-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Move the call to dsi_mgr_phy_enable after checking whether the DSI
interface is slave, so that PHY enablement happens together with the
host enablement.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210609211211.2561090-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Handling of the interrupt callback lists is done in dpu_core_irq.c,
under the "cb_lock" spinlock. When these operations results in the need
for enableing or disabling the IRQ in the hardware the code jumps to
dpu_hw_interrupts.c, which protects its operations with "irq_lock"
spinlock.
When an interrupt fires, dpu_hw_intr_dispatch_irq() inspects the
hardware state while holding the "irq_lock" spinlock and jumps to
dpu_core_irq_callback_handler() to invoke the registered handlers, which
traverses the callback list under the "cb_lock" spinlock.
As such, in the event that these happens concurrently we'll end up with
a deadlock.
Prior to '1c1e7763a6d4 ("drm/msm/dpu: simplify IRQ enabling/disabling")'
the enable/disable of the hardware interrupt was done outside the
"cb_lock" region, optimitically by using an atomic enable-counter for
each interrupt and an warning print if someone changed the list between
the atomic_read and the time the operation concluded.
Rather than re-introducing the large array of atomics, this change
embraces the fact that dpu_core_irq and dpu_hw_interrupts are deeply
entangled and make them share the single "irq_lock".
Following this step it's suggested that we squash the two parts into a
single irq handling thing.
Fixes: 1c1e7763a6d4 ("drm/msm/dpu: simplify IRQ enabling/disabling")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210611170003.3539059-1-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Wire up support to stall the SMMU on iova fault, and collect a devcore-
dump snapshot for easier debugging of faults.
Currently this is a6xx-only, but mostly only because so far it is the
only one using adreno-smmu-priv.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/20210610214431.539029-6-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use the new adreno-smmu-priv fault info function to get more SMMU
debug registers and print the current TTBR0 to debug per-instance
pagetables and figure out which GPU block generated the request.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210610214431.539029-4-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
While keeping the previous default value for hangcheck period,
we allow now the possibility of configuring its value via
debugfs.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Link: https://lore.kernel.org/r/20210607104441.184700-1-siglesias@igalia.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add adreno_is_{a660,a650_family} helpers and convert update existing
adreno_is_a650 usage based on downstream driver's logic (changing into
adreno_is_a650_family or adding adreno_is_a660).
And add the remaining changes required for A660, again based on
the downstream driver: missing GMU allocations, additional register init,
dummy hfi BW table, cp protect list, entry in gpulist table, hwcg table,
updated a6xx_ucode_check_version check.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20210608172808.11803-6-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
SM8250 AOP firmware already sets up PDC registers for us, and it only needs
to be enabled. This path will be used for other newer GPUs.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20210608172808.11803-3-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
These aren't used by anything anymore.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20210608172808.11803-2-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Based on mesa commit daa2ccff7a0201941db3901780d179e2634057d5
Small bit of .c churn in the phy code to adapt to split up of phy
related registers.
Signed-off-by: Rob Clark <robdclark@chromium.org>
The code does not really use dpu_hw_blk fields, so drop them, making
dpu_hw_blk empty structure.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210515190909.1809050-5-dmitry.baryshkov@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use struct dpu_hw_merge_3d pointer in struct dpu_hw_pingpong rather
than using struct dpu_hw_blk. This is the only user of dpu_hw_blk.id,
which will be cleaned in the next patch.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210515190909.1809050-4-dmitry.baryshkov@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The dpu_hw_blk_destroy() function is empty, so we can drop it now.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210515190909.1809050-3-dmitry.baryshkov@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Remove all unused dpu_hw_blk features and functions:
- dpu_hw_blk_get()/_put() and respective refcounting,
- global list of all dpu_hw_blk instances,
- dpu_hw_blk_ops and empty implementation inside each hw_blk subdriver.
This leaves dpu_hw_blk as a placeholder with just type and index.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210515190909.1809050-2-dmitry.baryshkov@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
In order to ease debugging of DSI host registration issues, print return
code of dsi_mgr_setup_components().
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/dp/dp_link.c:374: warning: expecting prototype for dp_parse_video_pattern_params(). Prototype was for dp_link_parse_video_pattern_params() instead
drivers/gpu/drm/msm/dp/dp_link.c:573: warning: expecting prototype for dp_parse_phy_test_params(). Prototype was for dp_link_parse_phy_test_params() instead
drivers/gpu/drm/msm/dp/dp_link.c:975: warning: expecting prototype for dp_link_process_downstream_port_status_change(). Prototype was for dp_link_process_ds_port_status_change() instead
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602143300.2330146-15-lee.jones@linaro.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/dp/dp_catalog.c:206: warning: Function parameter or member 'dp_catalog' not described in 'dp_catalog_aux_reset'
drivers/gpu/drm/msm/dp/dp_catalog.c:206: warning: Excess function parameter 'aux' description in 'dp_catalog_aux_reset'
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602143300.2330146-14-lee.jones@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/msm_gem.c:364: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/gpu/drm/msm/msm_gem.c:763: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602143300.2330146-13-lee.jones@linaro.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:373: warning: expecting prototype for _dpu_plane_set_panic_lut(). Prototype was for _dpu_plane_set_danger_lut() instead
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:498: warning: expecting prototype for _dpu_plane_set_vbif_qos(). Prototype was for _dpu_plane_set_qos_remap() instead
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602143300.2330146-12-lee.jones@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
These messages are useful for bringup/early development but in
production they don't provide much value. We know what sort of GPU we
have and interrupt information can be gathered other ways. This cuts
down on lines in the drm debug logs that happen too often, making the
debug logs practically useless.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: aravindh@codeaurora.org
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210430193104.1770538-3-swboyd@chromium.org
[resolve merge conflicts with dpu irq refactor]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Normal DP suspend operation contains two steps, display off followed
by dp suspend, to complete system wide suspending cycle if display is
up at that time. In this case, DP phy will be powered off at display
off. However there is an exception case that depending on the timing
of dongle plug in during system wide suspending, sometimes display off
procedure may be skipped and dp suspend was called directly. In this
case, dp phy is stay at powered on (phy->power_count = 1) so that at
next resume dp driver crash at main link clock enable due to phy is
not physically powered on. This patch will call dp_ctrl_off_link_stream()
to tear down main link and power off phy at dp_pm_suspend() if main link
had been brought up.
Changes in V2:
-- stashed changes into dp_ctrl.c
-- add is_phy_on to monitor phy state
Changes in V3:
-- delete is_phy_on
-- call dp_ctrl_off_link_stream() from dp_pm_suspend()
Changes in V4:
-- delete changes made at dp_power.c
-- move main link status checking to dp_pm_suspend
Changes in V5:
-- correct commit id at Fixes tag
Fixes: 8dbde399044b ("drm/msm/dp: handle irq_hpd with sink_count = 0 correctly)
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1622734846-14179-1-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
The result of container_of() operations is never NULL unless the embedded
element is the first element of the structure. This is not the case here.
The NULL checks on the result of container_of() are therefore unnecessary
and misleading. Remove them.
This change was made automatically with the following Coccinelle script.
@@
type t;
identifier v;
statement s;
@@
<+...
(
t v = container_of(...);
|
v = container_of(...);
)
...
when != v
- if (\( !v \| v == NULL \) ) s
...+>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210525112904.1747066-1-linux@roeck-us.net
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[DB: fixed patch subject]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The result of container_of() operations is never NULL unless the embedded
element is the first element of the structure. This is not the case here.
The NULL check on the result of container_of() is therefore unnecessary
and misleading. Remove it.
This change was made automatically with the following Coccinelle script.
@@
type t;
identifier v;
statement s;
@@
<+...
(
t v = container_of(...);
|
v = container_of(...);
)
...
when != v
- if (\( !v \| v == NULL \) ) s
...+>
While at it, remove unused but assigned variable hpd in
dp_display_usbpd_attention_cb().
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210525032033.453143-1-linux@roeck-us.net
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
clang is a little overzealous with warning about a constant conversion
in an untaken branch of a ternary expression:
drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c:975:48: error: implicit conversion from 'unsigned long long' to 'unsigned long' changes value from 5000000000 to 705032704 [-Werror,-Wconstant-conversion]
.max_pll_rate = (5000000000ULL < ULONG_MAX) ? 5000000000UL : ULONG_MAX,
^~~~~~~~~~~~
Rewrite this to use a preprocessor conditional instead to avoid the
warning.
Fixes: 076437c9e3 ("drm/msm/dsi: move min/max PLL rate to phy config")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210514213032.575161-1-arnd@kernel.org
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This patch fix coccicheck warning:
drivers/gpu/drm/msm/dp/dp_link.c:848:5-8: Unneeded variable: "ret". Return "0" on line 880
Also remove unneeded function return value check.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Link: https://lore.kernel.org/r/20210407130654.3387-1-bernard@vivo.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c: In function ‘dpu_encoder_phys_cmd_wait_for_commit_done’:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:688:31: warning: variable ‘cmd_enc’ set but not used [-Wunused-but-set-variable]
Fixes: fe286893ed ("drm/msm/dpu: Remove unused call in wait_for_commit_done")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210407083334.2762-1-thunder.leizhen@huawei.com
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/dp/dp_display.c: In function ‘dp_display_usbpd_attention_cb’:
drivers/gpu/drm/msm/dp/dp_display.c:496:19: warning: variable ‘hpd’ set but not used [-Wunused-but-set-variable]
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210303134319.3160762-4-lee.jones@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use resource-managed OPP API to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314163408.22292-12-digetx@gmail.com
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The error code returned by platform_get_irq() is stored in 'irq', it's
forgotten to be copied to 'ret' before being returned. As a result, the
value 0 of 'ret' is returned incorrectly.
After the above fix is completed, initializing the local variable 'ret'
to 0 is no longer needed, remove it.
In addition, when dpu_mdss_init() is successfully returned, the value of
'ret' is always 0. Therefore, replace "return ret" with "return 0" to make
the code clearer.
Fixes: 070e64dc1b ("drm/msm/dpu: Convert to a chained irq chip")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210510063805.3262-2-thunder.leizhen@huawei.com
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 7f9743abaa ("drm/msm: validate display and event threads")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210508022836.1777-1-thunder.leizhen@huawei.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Crtc perf update from frame event work can result in
wrong bandwidth and clock update from dpu if the work
is scheduled after the swap state has happened.
Avoid such issues by moving perf update to complete
commit once the frame is accepted by the hardware.
Fixes: a29c8c0241 ("drm/msm/disp/dpu1: fix display underruns during modeset")
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/1622092076-5100-1-git-send-email-mkrishn@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
These prints flood the logs with drm debugging set to enable kms and
driver logging (DRM_UT_KMS and DRM_UT_DRIVER). Let's move these prints
to the atomic bucket (DRM_UT_ATOMIC) as they're related to the atomic
paths.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: aravindh@codeaurora.org
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210430193104.1770538-7-swboyd@chromium.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use the DPU_DEBUG_PLANE() helper to print the plane number instead of
open coding it.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: aravindh@codeaurora.org
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210430193104.1770538-6-swboyd@chromium.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
These are verbose prints that tell us about the framebuffer state. Let's
move them to drm_dbg_state() so that they're only printed if we're
interested in verbose state logging while drm debugging.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: aravindh@codeaurora.org
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210430193104.1770538-5-swboyd@chromium.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This print is missing a newline, and doesn't really provide any value.
Drop it.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: aravindh@codeaurora.org
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210430193104.1770538-4-swboyd@chromium.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Put these debug prints in the vblank code into the appropriate vblank
category via drm_dbg_vbl().
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: aravindh@codeaurora.org
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210430193104.1770538-2-swboyd@chromium.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Merge dpu_core_irq_enable() into dpu_core_irq_register_callback() and
dpu_core_irq_disable() into dpu_core_irq_unregister_callback(), because
they are called in pairs. There is no need to have separate
enable/disable pair, we can enable hardware IRQ when first callback is
registered and when the last callback is unregistered.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210516202910.2141079-7-dmitry.baryshkov@linaro.org
[fixup tracepoint compile warns]
Signed-off-by: Rob Clark <robdclark@chromium.org>
There is no more need for the dpu_intr_type types, dpu_irq_map table,
individual intr defines and obsolete_irq field. Drop all of them now.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210516202910.2141079-6-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
The IRQ table in the dpu_hw_interrupts.h is big, ugly, and hard to
maintain. There are only few interrupts used from that table. Newer
generations use different IRQ locations. Move this data to hw catalog.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210516202910.2141079-5-dmitry.baryshkov@linaro.org
[fixup tracepoint compile warns/err]
Signed-off-by: Rob Clark <robdclark@chromium.org>
In order to make mdss_irqs readable (and error-prone) define names for
interrupt register indices.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210516202910.2141079-4-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Always call dpu_hw_intr_clear_intr_status_nolock() from the
dpu_hw_intr_dispatch_irqs(). This simplifies the callback function
(which call clears the interrupts anyway) and enforces clearing the hw
interrupt status.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210516202910.2141079-3-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
There is little sense in reading interrupt statuses and right after that
going after the array of statuses to dispatch them. Merge both loops
into single function doing read and dispatch.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210516202910.2141079-2-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Let's look at the irq status bits after a transfer and see if we got a
nack or a defer or a timeout, instead of telling drm layers that
everything was fine, while still printing an error message. I wasn't
sure about NACK+DEFER so I lumped all those various errors along with a
nack so that the drm core can figure out that things are just not going
well. The important thing is that we're now returning -ETIMEDOUT when
the message times out and nacks for bad addresses.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: aravindh@codeaurora.org
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Kuogee Hsieh <khsieh@codeaurora.org>
Link: https://lore.kernel.org/r/20210507212505.1224111-4-swboyd@chromium.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
We don't need to hold the lock to inspect the message we're going to
transfer, and we don't need to clear the busy flag either. Take the lock
later and bail out earlier if conditions aren't met.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: aravindh@codeaurora.org
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Kuogee Hsieh <khsieh@codeaurora.org>
Link: https://lore.kernel.org/r/20210507212505.1224111-3-swboyd@chromium.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Chengming Gui