Align line break to match with the open parenthesis.
Issue detected by checkpatch.pl.
Signed-off-by: Aline Santana Cordeiro <alinesantanacordeiro@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Balance braces around conditional statements.
Issue detected by checkpatch.pl.
It happens in if-else statements where one of the commands
uses braces around a block of code and the other command
does not since it has just a single line of code.
Signed-off-by: Aline Santana Cordeiro <alinesantanacordeiro@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Balance braces around conditional statements.
Issue detected by checkpatch.pl.
It happens in if-else statements where one of the commands
uses braces around a block of code and the other command
does not since it has just a single line of code.
Signed-off-by: Aline Santana Cordeiro <alinesantanacordeiro@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Balance braces around conditional statements.
Issue detected by checkpatch.pl.
It happens in if-else statements where one of the commands
uses braces around a block of code and the other command
does not since it has just a single line of code.
Signed-off-by: Aline Santana Cordeiro <alinesantanacordeiro@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Balance braces around conditional statements.
Issue detected by checkpatch.pl.
It happens in if-else statements where one of the commands
uses braces around a block of code and the other command
does not since it has just a single line of code.
Signed-off-by: Aline Santana Cordeiro <alinesantanacordeiro@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The right thing to do is to add a new object to the building
system when a certain config option is selected, and *not*
override them.
So, fix obj-$(config) logic at sti makefiles, using "+=",
instead of ":=".
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The usage of pm_runtime_resume_and_get() removed the need of a
temporary integer. So, drop it.
Fixes: 59f96244af ("media: exynos4-is: fix pm_runtime_get_sync() usage count")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Format all comments according to the coding-style.
Issue detected by checkpatch.pl.
Signed-off-by: Aline Santana Cordeiro <alinesantanacordeiro@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Format all comments according to the coding-style.
Issue detected by checkpatch.pl.
Signed-off-by: Aline Santana Cordeiro <alinesantanacordeiro@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Correct identation in block of conditional statements.
The conditional statement depends on the results of the
macro function "list_for_each_entry()".
Signed-off-by: Aline Santana Cordeiro <alinesantanacordeiro@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Correct identation in block of conditional statements.
The function "v4l2_device_unregister_subdev()" depends on
the results of the macro function "list_for_each_entry_safe()".
Signed-off-by: Aline Santana Cordeiro <alinesantanacordeiro@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Added spaces around '<<' operator to improve readability and meet linux
kernel coding style.
Reported by checkpatch
Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fixed the issue of line should not end with '[' by moving argument
from next line to line ending with '[' and made it under 80
characters.
Reported by checkpatch.
Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Removed unnecessary space before tabs to adhere to linux kernel coding
style.
Reported by checkpatch.
Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reduced length of line as it was exceeding 100 characters by removing
comments from same line and adding it to previous line. This makes code
neater, and meets linux kernel coding style.
Reported by checkpatch.
Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Removed an unnecessary blank line to meet linux kernel coding style.
Reported by checkpatch.pl
Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Aligns line break with the remaining function arguments
to the open parenthesis.
Issue found by checkpatch in file atomisp-gc2235.c
Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Aligns line break with the remaining function arguments
to the open parenthesis. Issue found by checkpatch.
Signed-off-by: Aline Santana Cordeiro <alinesantanacordeiro@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Aligns line break with the remaining function arguments
to the open parenthesis. Issue found by checkpatch.
Signed-off-by: Aline Santana Cordeiro <alinesantanacordeiro@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Aligns line break with the remaining function arguments
to the open parenthesis. Issue found by checkpatch.
Signed-off-by: Aline Santana Cordeiro <alinesantanacordeiro@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
As a bonus, as pm_runtime_get_sync() always return 0 on
success, the logic can be simplified.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
On some places, this is ok, but on others the usage count
ended being unbalanced on failures.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
As a bonus, such function always return zero on success. So,
some code can be simplified.
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
The bdisp_start_streaming() doesn't take it into account, which
would unbalance PM usage counter at bdisp_stop_streaming().
The logic at bdisp_probe() is correct, but the best is to use
the same call along the driver.
So, replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.
Use the new API, in order to cleanup the error check logic.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
As a plus, pm_runtime_resume_and_get() doesn't return
positive numbers, so the return code validation can
be removed.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently, the driver just assumes that PM runtime logic
succeded resuming the device.
That may not be the case, as pm_runtime_get_sync()
can fail (but keeping the usage count incremented).
Replace the code to use pm_runtime_resume_and_get(),
and letting it return the error code.
This way, if mtk_vcodec_dec_pw_on() fails, the logic
under fops_vcodec_open() will do the right thing and
return an error, instead of just assuming that the
device is ready to be used.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
While here, check if the PM runtime error was caught at open time.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
While here, ensure that the driver will check if PM runtime
resumed at vpfe_initialize_device().
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
While here, check if the PM runtime error was caught at
s5p_cec_adap_enable().
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Right now, the driver just assumes that PM runtime resume
worked, but it may fail.
Well, the pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
So, using it is tricky. Let's replace it by the new
pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
and return an error if something bad happens.
This should ensure that the PM runtime usage_count will be
properly decremented if an error happens at open time.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
Also, right now, the driver is ignoring any troubles when
trying to do PM resume. So, add the proper error handling
for the code.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
While here, fix the return contition of mtk_mdp_m2m_start_streaming(),
as it doesn't make any sense to return 0 if the PM runtime failed
to resume.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Calling pm_runtime_get_sync() is bad, since even when it
returns an error, pm_runtime_put*() should be called.
So, use instead pm_runtime_resume_and_get().
While here, ensure that the error condition will be checked
during clock enable an media open() calls.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The device_run() first enables the clock and then
tries to resume PM runtime, checking for errors.
Well, if for some reason the pm_runtime can not resume,
it would be better to detect it beforehand.
So, change the order inside device_run().
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Fixes: 775fec6900 ("media: add Rockchip VPU JPEG encoder driver")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are several issues in the way the atmel driver handles
pm_runtime_get_sync():
- it doesn't check return codes;
- it doesn't properly decrement the usage_count on all places;
- it starts streaming even if pm_runtime_get_sync() fails.
- while it tries to get pm_runtime at the clock enable logic,
it doesn't check if the operation was suceeded.
Replace all occurrences of it to use the new kAPI:
pm_runtime_resume_and_get(), which ensures that, if the
return code is not negative, the usage_count was incremented.
With that, add additional checks when this is called, in order
to ensure that errors will be properly addressed.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Calling pm_runtime_get_sync() at driver's removal time is not
needed, as this will resume PM runtime. Also, the PM runtime
code at pm_runtime_disable() already calls it, if it detects
the need.
So, change the logic in order to disable PM runtime earlier.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The PM runtime get logic is currently broken, as it checks if
ret is zero instead of checking if it is an error code,
as reported by Dan Carpenter.
While here, use the pm_runtime_resume_and_get() as added by:
commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors. As a bonus, such function
always return zero on success.
It should also be noticed that a fail of pm_runtime_get_sync() would
potentially result in a spurious runtime_suspend(), instead of
using pm_runtime_put_noidle().
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
There is a bug at ccs_pm_get_init(): when this function returns
an error, the stream is not started, and RPM usage_count
should not be incremented. However, if the calls to
v4l2_ctrl_handler_setup() return errors, it will be kept
incremented.
At ccs_suspend() the best is to replace it by the new
pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter automatically,
in the case of errors.
Fixes: 96e3a6b92f ("media: smiapp: Avoid maintaining power state information")
Cc: stable@vger.kernel.org
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If pm_runtime resume logic fails, return the error code
provided by it, instead of -EAGAIN, as, depending on what
caused it to fail, it may not be something that would be
recovered.
Fixes: cbba45d436 ("[media] smiapp: Use runtime PM")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There's a bug at s5p_cec_adap_enable(): if called to
disable the device, it should call pm_runtime_put()
instead of pm_runtime_disable(), as the goal here is to
decrement the usage_count and not to disable PM runtime.
Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes: 1bcbf6f4b6 ("[media] cec: s5p-cec: Add s5p-cec driver")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Venus code has a sort of watchdog that attempts to recover
from IP errors, implemented as a delayed work job, which
calls venus_sys_error_handler().
Right now, it has several issues:
1. It assumes that PM runtime resume never fails
2. It internally runs two while() loops that also assume that
PM runtime will never fail to go idle:
while (pm_runtime_active(core->dev_dec) || pm_runtime_active(core->dev_enc))
msleep(10);
...
while (core->pmdomains[0] && pm_runtime_active(core->pmdomains[0]))
usleep_range(1000, 1500);
3. It uses an OR to merge all return codes and then report to the user
4. If the hardware never recovers, it keeps running on every 10ms,
flooding the syslog with 2 messages (so, up to 200 messages
per second).
Rework the code, in order to prevent that, by:
1. check the return code from PM runtime resume;
2. don't let the while() loops run forever;
3. store the failed event;
4. use warn ratelimited when it fails to recover.
Fixes: af2c3834c8 ("[media] media: venus: adding core part and helper functions")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Commit b9d79e4ca4 ("fbmem: Mark proc_fb_seq_ops as __maybe_unused")
places the '__maybe_unused' in an entirely incorrect location between
the "struct" keyword and the structure name.
It's a wonder that gcc accepts that silently, but clang quite reasonably
warns about it:
drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes]
static const struct __maybe_unused seq_operations proc_fb_seq_ops = {
^
Fix it.
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
amdgpu:
- MPO hang workaround
- Fix for concurrent VM flushes on vega/navi
- dcefclk is not adjustable on navi1x and newer
- MST HPD debugfs fix
- Suspend/resumes fixes
- Register VGA clients late in case driver fails to load
- Fix GEM leak in user framebuffer create
- Add support for polaris12 with 32 bit memory interface
- Fix duplicate cursor issue when using overlay
- Fix corruption with tiled surfaces on VCN3
- Add BO size and stride check to fix BO size verification
radeon:
- Fix off-by-one in power state parsing
- Fix possible memory leak in power state parsing
msm:
- NULL ptr dereference fix
fbdev:
- procfs disabled warning fix
i915:
- gvt: Fix a possible division by zero in vgpu display rate calculation
-----BEGIN PGP SIGNATURE-----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=KQzl
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Bit later than usual, I queued them all up on Friday then promptly
forgot to write the pull request email. This is mainly amdgpu fixes,
with some radeon/msm/fbdev and one i915 gvt fix thrown in.
amdgpu:
- MPO hang workaround
- Fix for concurrent VM flushes on vega/navi
- dcefclk is not adjustable on navi1x and newer
- MST HPD debugfs fix
- Suspend/resumes fixes
- Register VGA clients late in case driver fails to load
- Fix GEM leak in user framebuffer create
- Add support for polaris12 with 32 bit memory interface
- Fix duplicate cursor issue when using overlay
- Fix corruption with tiled surfaces on VCN3
- Add BO size and stride check to fix BO size verification
radeon:
- Fix off-by-one in power state parsing
- Fix possible memory leak in power state parsing
msm:
- NULL ptr dereference fix
fbdev:
- procfs disabled warning fix
i915:
- gvt: Fix a possible division by zero in vgpu display rate
calculation"
* tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: Use device specific BO size & stride check.
drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode.
drm/amd/pm: initialize variable
drm/radeon: Avoid power table parsing memory leaks
drm/radeon: Fix off-by-one power_state index heap overwrite
drm/amd/display: Fix two cursor duplication when using overlay
drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC
fbmem: Mark proc_fb_seq_ops as __maybe_unused
drm/msm/dpu: Delete bonkers code
drm/i915/gvt: Prevent divided by zero when calculating refresh rate
amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create
drm/amdgpu: Register VGA clients after init can no longer fail
drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown
drm/amdgpu: fix r initial values
drm/amd/display: fix wrong statement in mst hpd debugfs
amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus
amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID
drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2
drm/amd/display: Reject non-zero src_y and src_x for video planes
Aline Santana Cordeiro