KVM_GET_SUPPORTED_HV_CPUID is now supported as both vCPU and VM ioctl,
test that.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200929150944.1235688-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extend the KVM_SET_SREGS test to verify that all supported CR4 bits, as
enumerated by KVM, can be set before KVM_SET_CPUID2, i.e. without first
defining the vCPU model. KVM is supposed to skip guest CPUID checks
when host userspace is stuffing guest state.
Check the inverse as well, i.e. that KVM rejects KVM_SET_REGS if CR4
has one or more unsupported bits set.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20201007014417.29276-7-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Even though one iteration is not enough for the dirty log performance
test (due to the cost of building page tables, zeroing memory etc.)
two is okay and it is the default. Without this patch,
"./dirty_log_perf_test" without any further arguments fails.
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The dirty log perf test will time verious dirty logging operations
(enabling dirty logging, dirtying memory, getting the dirty log,
clearing the dirty log, and disabling dirty logging) in order to
quantify dirty logging performance. This test can be used to inform
future performance improvements to KVM's dirty logging infrastructure.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-6-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We also check the input number of vcpus against the maximum supported.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201104212357.171559-8-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename vcpu_memory_bytes to something with "percpu" in it
in order to be less ambiguous. Also make it global to
simplify things.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201104212357.171559-7-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201104212357.171559-3-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wrfract will be used by the dirty logging perf test introduced later in
this series to dirty memory sparsely.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-5-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper function to get the current time and return the time since
a given start time. Use that function to simplify the timekeeping in the
demand paging test.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-4-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rounding the address the guest writes to a host page boundary
will only have an effect if the host page size is larger than the guest
page size, but in that case the guest write would still go to the same
host page. There's no reason to round the address down, so remove the
rounding to simplify the demand paging test.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-3-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Much of the code in demand_paging_test can be reused by other, similar
multi-vCPU-memory-touching-perfromance-tests. Factor that common code
out for reuse.
No functional change expected.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-2-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the clear_dirty_log test, instead merge it into the existing
dirty_log_test. It should be cleaner to use this single binary to do
both tests, also it's a preparation for the upcoming dirty ring test.
The default behavior will run all the modes in sequence.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012233.6013-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We used not to clear the dirty bitmap before because KVM_GET_DIRTY_LOG
would overwrite it the next time it copies the dirty log onto it.
In the upcoming dirty ring tests we'll start to fetch dirty pages from
a ring buffer, so no one is going to clear the dirty bitmap for us.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012228.5916-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for the SVE registers to get-reg-list and create a
new test, get-reg-list-sve, which tests them when running on a
machine with SVE support.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201029201703.102716-5-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check for KVM_GET_REG_LIST regressions. The blessed list was
created by running on v4.15 with the --core-reg-fixup option.
The following script was also used in order to annotate system
registers with their names when possible. When new system
registers are added the names can just be added manually using
the same grep.
while read reg; do
if [[ ! $reg =~ ARM64_SYS_REG ]]; then
printf "\t$reg\n"
continue
fi
encoding=$(echo "$reg" | sed "s/ARM64_SYS_REG(//;s/),//")
if ! name=$(grep "$encoding" ../../../../arch/arm64/include/asm/sysreg.h); then
printf "\t$reg\n"
continue
fi
name=$(echo "$name" | sed "s/.*SYS_//;s/[\t ]*sys_reg($encoding)$//")
printf "\t$reg\t/* $name */\n"
done < <(aarch64/get-reg-list --core-reg-fixup --list)
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201029201703.102716-3-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a set of tests that ensure the guest cannot access paravirtual msrs
and hypercalls that have been disabled in the KVM_CPUID_FEATURES leaf.
Expect a #GP in the case of msr accesses and -KVM_ENOSYS from
hypercalls.
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20201027231044.655110-7-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the infrastructure needed to enable exception handling in selftests.
This allows any of the exception and interrupt vectors to be overridden
in the guest.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20201012194716.3950330-4-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ensure the out value 'uc' in get_ucall() is properly reporting
UCALL_NONE if the call fails. The return value will be correctly
reported, however, the out parameter 'uc' will not be. Clear the struct
to ensure the correct value is being reported in the out parameter.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20201012194716.3950330-3-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the layout of 'struct desc64' to match the layout described in the
SDM Vol 3, Chapter 3 "Protected-Mode Memory Management", section 3.4.5
"Segment Descriptors", Figure 3-8 "Segment Descriptor". The test added
later in this series relies on this and crashes if this layout is not
correct.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20201012194716.3950330-2-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unless we want to test with THP, then we shouldn't require it to be
configured by the host kernel. Unfortunately, even advising with
MADV_NOHUGEPAGE does require it, so check for THP first in order
to avoid madvise failing with EINVAL.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201029201703.102716-2-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a regression test for commit 671ddc700f ("KVM: nVMX: Don't leak
L1 MMIO regions to L2").
First, check to see that an L2 guest can be launched with a valid
APIC-access address that is backed by a page of L1 physical memory.
Next, set the APIC-access address to a (valid) L1 physical address
that is not backed by memory. KVM can't handle this situation, so
resuming L2 should result in a KVM exit for internal error
(emulation).
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20201026180922.3120555-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM special-cases writes to MSR_IA32_TSC so that all CPUs have
the same base for the TSC. This logic is complicated, and we
do not want it to have any effect once the VM is started.
In particular, if any guest started to synchronize its TSCs
with writes to MSR_IA32_TSC rather than MSR_IA32_TSC_ADJUST,
the additional effect of kvm_write_tsc code would be uncharted
territory.
Therefore, this patch makes writes to MSR_IA32_TSC behave
essentially the same as writes to MSR_IA32_TSC_ADJUST when
they come from the guest. A new selftest (which passes
both before and after the patch) checks the current semantics
of writes to MSR_IA32_TSC and MSR_IA32_TSC_ADJUST originating
from both the host and the guest.
Upcoming work to remove the special side effects
of host-initiated writes to MSR_IA32_TSC and MSR_IA32_TSC_ADJUST
will be able to build onto this test, adjusting the host side
to use the new APIs and achieve the same effect.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that we have the ability to handle MSRs from user space and also to
select which ones we do want to prevent in-kernel KVM code from handling,
let's add a selftest to show case and verify the API.
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20200925143422.21718-9-graf@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename SECONDARY_EXEC_RDTSCP to SECONDARY_EXEC_ENABLE_RDTSCP in
preparation for consolidating the logic for adjusting secondary exec
controls based on the guest CPUID model.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923165048.20486-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a follow-up patch to fix an issue left in commit:
98b0bf0273
selftests: kvm: Use a shorter encoding to clear RAX
With the change in the commit, we also need to modify "xor" instruction
length from 3 to 2 in array ss_size accordingly to pass below check:
for (i = 0; i < (sizeof(ss_size) / sizeof(ss_size[0])); i++) {
target_rip += ss_size[i];
CLEAR_DEBUG();
debug.control = KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_SINGLESTEP;
debug.arch.debugreg[7] = 0x00000400;
APPLY_DEBUG();
vcpu_run(vm, VCPU_ID);
TEST_ASSERT(run->exit_reason == KVM_EXIT_DEBUG &&
run->debug.arch.exception == DB_VECTOR &&
run->debug.arch.pc == target_rip &&
run->debug.arch.dr6 == target_dr6,
"SINGLE_STEP[%d]: exit %d exception %d rip 0x%llx "
"(should be 0x%llx) dr6 0x%llx (should be 0x%llx)",
i, run->exit_reason, run->debug.arch.exception,
run->debug.arch.pc, target_rip, run->debug.arch.dr6,
target_dr6);
}
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Message-Id: <20200826015524.13251-1-weijiang.yang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If debug_regs.c is built with newer binutils, the resulting binary is "optimized"
by the assembler:
asm volatile("ss_start: "
"xor %%rax,%%rax\n\t"
"cpuid\n\t"
"movl $0x1a0,%%ecx\n\t"
"rdmsr\n\t"
: : : "rax", "ecx");
is translated to :
000000000040194e <ss_start>:
40194e: 31 c0 xor %eax,%eax <----- rax->eax?
401950: 0f a2 cpuid
401952: b9 a0 01 00 00 mov $0x1a0,%ecx
401957: 0f 32 rdmsr
As you can see rax is replaced with eax in target binary code.
This causes a difference is the length of xor instruction (2 Byte vs 3 Byte),
and makes the hard-coded instruction length check fail:
/* Instruction lengths starting at ss_start */
int ss_size[4] = {
3, /* xor */ <-------- 2 or 3?
2, /* cpuid */
5, /* mov */
2, /* rdmsr */
};
Encode the shorter version directly and, while at it, fix the "clobbers"
of the asm.
Cc: stable@vger.kernel.org
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
hdr.vmx.flags is meant for future extensions to the ABI, rejecting
invalid flags is necessary to avoid broken half-loads of the
nVMX state.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A missing VMCS12 was not causing -EINVAL (it was just read with
copy_from_user, so it is not a security issue, but it is still
wrong). Test for VMCS12 validity and reject the nested state
if a VMCS12 is required but not present.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Setting KVM_STATE_NESTED_GUEST_MODE enables various consistency checks
on VMCS12 and therefore causes KVM_SET_NESTED_STATE to fail spuriously
with -EINVAL. Do not set the flag so that we're sure to cover the
conditions included by the test, and cover the case where VMCS12 is
set and KVM_SET_NESTED_STATE is called with invalid VMCS12 contents.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It was reported that older GCCs compile smm_test in a way that breaks
it completely:
kvm_exit: reason EXIT_CPUID rip 0x4014db info 0 0
func 7ffffffd idx 830 rax 0 rbx 0 rcx 0 rdx 0, cpuid entry not found
...
kvm_exit: reason EXIT_MSR rip 0x40abd9 info 0 0
kvm_msr: msr_read 487 = 0x0 (#GP)
...
Note, '7ffffffd' was supposed to be '80000001' as we're checking for
SVM. Dropping '-O2' from compiler flags help. Turns out, asm block in
sync_with_host() is wrong. We us 'in 0xe, %%al' instruction to sync
with the host and in 'AL' register we actually pass the parameter
(stage) but after sync 'AL' gets written to but GCC thinks the value
is still there and uses it to compute 'EAX' for 'cpuid'.
smm_test can't fully use standard ucall() framework as we need to
write a very simple SMI handler there. Fix the immediate issue by
making RAX input/output operand. While on it, make sync_with_host()
static inline.
Reported-by: Marcelo Bandeira Condotta <mcondotta@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200610164116.770811-1-vkuznets@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_CAP_HYPERV_ENLIGHTENED_VMCS will be reported as supported even when
nested VMX is not, fix evmcs_test/hyperv_cpuid tests to check for both.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200610135847.754289-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
state_test/smm_test use KVM_CAP_NESTED_STATE check as an indicator for
nested VMX/SVM presence and this is incorrect. Check for the required
features dirrectly.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200610135847.754289-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly set the VA width to 48 bits for the x86_64-only PXXV48_4K VM
mode instead of asserting the guest VA width is 48 bits. The fact that
KVM supports 5-level paging is irrelevant unless the selftests opt-in to
5-level paging by setting CR4.LA57 for the guest. The overzealous
assert prevents running the selftests on a kernel with 5-level paging
enabled.
Incorporate LA57 into the assert instead of removing the assert entirely
as a sanity check of KVM's CPUID output.
Fixes: 567a9f1e9d ("KVM: selftests: Introduce VM_MODE_PXXV48_4K")
Reported-by: Sergio Perez Gonzalez <sergio.perez.gonzalez@intel.com>
Cc: Adriana Cervantes Jimenez <adriana.cervantes.jimenez@intel.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200528021530.28091-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Marcelo reports that kvm selftests fail to build with
"make ARCH=x86_64":
gcc -Wall -Wstrict-prototypes -Wuninitialized -O2 -g -std=gnu99
-fno-stack-protector -fno-PIE -I../../../../tools/include
-I../../../../tools/arch/x86_64/include -I../../../../usr/include/
-Iinclude -Ilib -Iinclude/x86_64 -I.. -c lib/kvm_util.c
-o /var/tmp/20200604202744-bin/lib/kvm_util.o
In file included from lib/kvm_util.c:11:
include/x86_64/processor.h:14:10: fatal error: asm/msr-index.h: No such
file or directory
#include <asm/msr-index.h>
^~~~~~~~~~~~~~~~~
compilation terminated.
"make ARCH=x86", however, works. The problem is that arch specific headers
for x86_64 live in 'tools/arch/x86/include', not in
'tools/arch/x86_64/include'.
Fixes: 66d69e081b ("selftests: fix kvm relocatable native/cross builds and installs")
Reported-by: Marcelo Bandeira Condotta <mcondotta@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200605142028.550068-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vmx_tsc_adjust_test fails with:
IA32_TSC_ADJUST is -4294969448 (-1 * TSC_ADJUST_VALUE + -2152).
IA32_TSC_ADJUST is -4294969448 (-1 * TSC_ADJUST_VALUE + -2152).
IA32_TSC_ADJUST is 281470681738540 (65534 * TSC_ADJUST_VALUE + 4294962476).
==== Test Assertion Failure ====
x86_64/vmx_tsc_adjust_test.c:153: false
pid=19738 tid=19738 - Interrupted system call
1 0x0000000000401192: main at vmx_tsc_adjust_test.c:153
2 0x00007fe1ef8583d4: ?? ??:0
3 0x0000000000401201: _start at ??:?
Failed guest assert: (adjust <= max)
The problem is that is 'tsc_val' should be u64, not u32 or the reading
gets truncated.
Fixes: 8d7fbf01f9 ("KVM: selftests: VMX preemption timer migration test")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200601154726.261868-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update tests to reflect new CPUID capabilities with SYNDBG.
Check that we get the right number of entries and that
0x40000000.EAX always returns the correct max leaf.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200529134543.1127440-7-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a nested VM with a VMX-preemption timer is migrated, verify that the
nested VM and its parent VM observe the VMX-preemption timer exit close to
the original expiration deadline.
Signed-off-by: Makarand Sonare <makarandsonare@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200526215107.205814-3-makarandsonare@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_CAP_NESTED_STATE is now supported for AMD too but smm test acts like
it is still Intel only.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200529130407.57176-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The test is similar to the existing one for VMX, but simpler because we
don't have to test shadow VMCS or vmptrld/vmptrst/vmclear.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Many tests will want to check if the CPU is Intel or AMD in
guest code, add cpu_has_svm() and put it as static
inline to svm_util.h.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200529130407.57176-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When KVM_EXIT_DEBUG is raised for the disabled-breakpoints case (DR7.GD),
DR6 was incorrectly copied from the value in the VM. Instead,
DR6.BD should be set in order to catch this case.
On AMD this does not need any special code because the processor triggers
a #DB exception that is intercepted. However, the testcase would fail
without the previous patch because both DR6.BS and DR6.BD would be set.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This Kselftest update for Linux 5.7-rc5 consists of ftrace test fixes
and fix to kvm Makefile for relocatable native/cross builds and installs.
-----BEGIN PGP SIGNATURE-----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=jUcW
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"ftrace test fixes and a fix to kvm Makefile for relocatable
native/cross builds and installs"
* tag 'linux-kselftest-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: fix kvm relocatable native/cross builds and installs
selftests/ftrace: Make XFAIL green color
ftrace/selftest: make unresolved cases cause failure if --fail-unresolved set
ftrace/selftests: workaround cgroup RT scheduling issues
Covers fundamental tests for KVM_SET_GUEST_DEBUG. It is very close to the debug
test in kvm-unit-test, but doing it from outside the guest.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200505205000.188252-4-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I got this error when building kvm selftests:
/usr/bin/ld: /home/xz/git/linux/tools/testing/selftests/kvm/libkvm.a(vmx.o):/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:222: multiple definition of `current_evmcs'; /tmp/cco1G48P.o:/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:222: first defined here
/usr/bin/ld: /home/xz/git/linux/tools/testing/selftests/kvm/libkvm.a(vmx.o):/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:223: multiple definition of `current_vp_assist'; /tmp/cco1G48P.o:/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:223: first defined here
I think it's because evmcs.h is included both in a test file and a lib file so
the structs have multiple declarations when linking. After all it's not a good
habit to declare structs in the header files.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200504220607.99627-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm test Makefile doesn't fully support cross-builds and installs.
UNAME_M = $(shell uname -m) variable is used to define the target
programs and libraries to be built from arch specific sources in
sub-directories.
For cross-builds to work, UNAME_M has to map to ARCH and arch specific
directories and targets in this Makefile.
UNAME_M variable to used to run the compiles pointing to the right arch
directories and build the right targets for these supported architectures.
TEST_GEN_PROGS and LIBKVM are set using UNAME_M variable.
LINUX_TOOL_ARCH_INCLUDE is set using ARCH variable.
x86_64 targets are named to include x86_64 as a suffix and directories
for includes are in x86_64 sub-directory. s390x and aarch64 follow the
same convention. "uname -m" doesn't result in the correct mapping for
s390x and aarch64. Fix it to set UNAME_M correctly for s390x and aarch64
cross-builds.
In addition, Makefile doesn't create arch sub-directories in the case of
relocatable builds and test programs under s390x and x86_64 directories
fail to build. This is a problem for native and cross-builds. Fix it to
create all necessary directories keying off of TEST_GEN_PROGS.
The following use-cases work with this change:
Native x86_64:
make O=/tmp/kselftest -C tools/testing/selftests TARGETS=kvm install \
INSTALL_PATH=$HOME/x86_64
arm64 cross-build:
make O=$HOME/arm64_build/ ARCH=arm64 HOSTCC=gcc \
CROSS_COMPILE=aarch64-linux-gnu- defconfig
make O=$HOME/arm64_build/ ARCH=arm64 HOSTCC=gcc \
CROSS_COMPILE=aarch64-linux-gnu- all
make kselftest-install TARGETS=kvm O=$HOME/arm64_build ARCH=arm64 \
HOSTCC=gcc CROSS_COMPILE=aarch64-linux-gnu-
s390x cross-build:
make O=$HOME/s390x_build/ ARCH=s390 HOSTCC=gcc \
CROSS_COMPILE=s390x-linux-gnu- defconfig
make O=$HOME/s390x_build/ ARCH=s390 HOSTCC=gcc \
CROSS_COMPILE=s390x-linux-gnu- all
make kselftest-install TARGETS=kvm O=$HOME/s390x_build/ ARCH=s390 \
HOSTCC=gcc CROSS_COMPILE=s390x-linux-gnu- all
No regressions in the following use-cases:
make -C tools/testing/selftests TARGETS=kvm
make kselftest-all TARGETS=kvm
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
On AMD, the state of the VMCB is undefined after a shutdown VMEXIT. KVM
takes a very conservative approach to that and resets the guest altogether
when that happens. This causes the set_memory_region_test to fail
because the RIP is 0xfff0 (the reset vector). Restrict the RIP test
to KVM_EXIT_INTERNAL_ERROR in order to fix this.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch introduces test_add_max_memory_regions(), which checks
that a VM can have added memory slots up to the limit defined in
KVM_CAP_NR_MEMSLOTS. Then attempt to add one more slot to
verify it fails as expected.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200410231707.7128-11-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make set_memory_region_test available on all architectures by wrapping
the bits that are x86-specific in ifdefs. A future testcase
to create the maximum number of memslots will be architecture
agnostic.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200410231707.7128-10-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a testcase for running a guest with no memslots to the memory region
test. The expected result on x86_64 is that the guest will trigger an
internal KVM error due to the initial code fetch encountering a
non-existent memslot and resulting in an emulation failure.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200410231707.7128-9-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduces the vm_get_fd() function in kvm_util which returns
the VM file descriptor.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200410231707.7128-8-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a testcase for deleting memslots while the guest is running.
Like the "move" testcase, this is x86_64-only as it relies on MMIO
happening when a non-existent memslot is encountered.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200410231707.7128-7-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use sem_post() and sem_timedwait() to synchronize test stages between
the vCPU thread and the main thread instead of using usleep() to wait
for the vCPU thread and hoping for the best.
Opportunistically refactor the code to make it suck less in general,
and to prepare for adding more testcases.
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200410231707.7128-6-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add variants of GUEST_ASSERT to pass values back to the host, e.g. to
help debug/understand a failure when the the cause of the assert isn't
necessarily binary.
It'd probably be possible to auto-calculate the number of arguments and
just have a single GUEST_ASSERT, but there are a limited number of
variants and silently eating arguments could lead to subtle code bugs.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200410231707.7128-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a utility to delete a memory region, it will be used by x86's
set_memory_region_test.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20200410231707.7128-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the KVM selftests' homebrewed linked lists for vCPUs and memory
regions with the kernel's 'struct list_head'.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20200410231707.7128-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The sole caller of vm_vcpu_rm() already has the vcpu pointer, take it
directly instead of doing an extra lookup.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20200410231707.7128-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Here are 3 SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your current
tree, that should be trivial to handle (one file modified by two things,
one file deleted.)
All 3 of these have been in linux-next for a while, with no reported
issues other than the merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodg5A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykySQCgy9YDrkz7nWq6v3Gohl6+lW/L+rMAnRM4uTZm
m5AuCzO3Azt9KBi7NL+L
=2Lm5
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
Fix a copy-paste typo in a comment and error message.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320205546.2396-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The steal_time test's timespec stop condition was wrong and should have
used the timespec functions instead to avoid being wrong, but
timespec_diff had a strange interface. Rework all the timespec API and
its use.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check that guest doesn't hang when an invalid eVMCS GPA is specified.
Testing that #UD is injected would probably be better but selftests lack
the infrastructure currently.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check that VMfailInvalid happens when eVMCS revision is is invalid.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM allows to use revision_id from MSR_IA32_VMX_BASIC as eVMCS revision_id
to workaround a bug in genuine Hyper-V (see the comment in
nested_vmx_handle_enlightened_vmptrld()), this shouldn't be used by
default. Switch to using KVM_EVMCS_VERSION(1).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Changed all tests and utilities to use TEST_FAIL macro
instead of TEST_ASSERT(false,...).
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some tests/utilities use the TEST_ASSERT(false, ...) pattern to
indicate a failure and stop execution.
This change introduces the TEST_FAIL macro which is a wrap around
TEST_ASSERT(false, ...) and so provides a direct alternative for
failing a test.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Normal reset and initial CPU reset do not clear all registers. Add a
test that those registers are NOT changed.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We should not only test the oneregs or the get_(x)regs interfaces but
also the sync_regs. Those are usually the canonical place for register
content.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The guest crashes very early due to changes in the control registers
used by dynamic address translation. Let us use different registers
that will not crash the guest.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The steal-time test confirms what is reported to the guest as stolen
time is consistent with the run_delay reported for the VCPU thread
on the host. Both x86_64 and AArch64 have the concept of steal/stolen
time so this test is introduced for both architectures.
While adding the test we ensure .gitignore has all tests listed
(it was missing s390x/resets) and that the Makefile has all tests
listed in alphabetical order (not really necessary, but it almost
was already...). We also extend the common API with a new num-guest-
pages call and a new timespec call.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Also correct the comment and prototype for vm_create_default(),
as it takes a number of pages, not a size.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the format attribute to enable printf format warnings, and
then fix them all.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
acrs are 32 bit and not 64 bit.
Reported-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
value is u64 and not string.
Reported-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move function documentation comment blocks to the header files in
order to avoid duplicating them for each architecture. While at
it clean up and fix up the comment blocks.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add svm_vmcall_test to gitignore list, and realphabetize it.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
s390 requires 1M aligned guest sizes. Embedding the rounding in
vm_adjust_num_guest_pages() allows us to remove it from a few
other places.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the new capability KVM_DIRTY_LOG_INITIALLY_SET of
KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 has been introduced, tweak the
clear_dirty_log_test to use it.
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The TEST_ASSERT in x86_64/platform_info_test.c would have print 'ucall'
instead of 'uc.cmd'. Also fix all uc.cmd format types.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a KVM selftest to test moving the base gfn of a userspace memory
region. Although the basic concept of moving memory regions is not x86
specific, the assumptions regarding large pages and MMIO shenanigans
used to verify the correctness make this x86_64 only for the time being.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We leave some printf's because they inform the user the test is being
skipped. QUIET should not disable those. We also leave the printf's
used for help text.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There were a few problems with the way we output "debug" messages.
The first is that we used DEBUG() which is defined when NDEBUG is
not defined, but NDEBUG will never be defined for kselftests
because it relies too much on assert(). The next is that most
of the DEBUG() messages were actually "info" messages, which
users may want to turn off if they just want a silent test that
either completes or asserts. Finally, a debug message output from
a library function, and thus for all tests, was annoying when its
information wasn't interesting for a test.
Rework these messages so debug messages only output when DEBUG
is defined and info messages output unless QUIET is defined.
Also name the functions pr_debug and pr_info and make sure that
when they're disabled we eat all the inputs. The later avoids
unused variable warnings when the variables were only defined
for the purpose of printing.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to quantify demand paging performance, time guest execution
during demand paging.
Signed-off-by: Ben Gardon <bgardon@google.com>
[Move timespec-diff to test_util.h]
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most VMs have multiple vCPUs, the concurrent execution of which has a
substantial impact on demand paging performance. Add an option to create
multiple vCPUs to each access disjoint regions of memory.
Signed-off-by: Ben Gardon <bgardon@google.com>
[guest_code() can't return, use GUEST_ASSERT(). Ensure the number
of guests pages is compatible with the host.]
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently vcpu_args_set is only implemented for x86. This makes writing
tests with multiple vCPUs difficult as each guest vCPU must either a.)
do the same thing or b.) derive some kind of unique token from it's
registers or the architecture. To simplify the process of writing tests
with multiple vCPUs for s390 and aarch64, add set args functions for
those architectures.
Signed-off-by: Ben Gardon <bgardon@google.com>
[Fixed array index (num => i) and made some style changes.]
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for supporting multiple vCPUs in the demand paging test,
pass arguments to the vCPU in a consolidated global struct instead of
syncing multiple globals.
Signed-off-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an argument to allow the demand paging test to work on larger and
smaller guest sizes.
Signed-off-by: Ben Gardon <bgardon@google.com>
[Rewrote parse_size() to simplify and provide user more flexibility as
to how sizes are input. Also fixed size overflow assert.]
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running the demand paging test with the -u option, the User Fault
FD handler essentially adds an arbitrary delay to page fault resolution.
To enable better simulation of a real demand paging scenario, add a
configurable delay to the UFFD handler.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The demand paging test is currently a simple page access test which, while
potentially useful, doesn't add much versus the existing dirty logging
test. To improve the demand paging test, add a basic userfaultfd demand
paging implementation.
Signed-off-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While userfaultfd, KVM's demand paging implementation, is not specific
to KVM, having a benchmark for its performance will be useful for
guiding performance improvements to KVM. As a first step towards creating
a userfaultfd demand paging test, create a simple memory access test,
based on dirty_log_test.
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Guests and hosts don't have to have the same page size. This means
calculations are necessary when selecting the number of guest pages
to allocate in order to ensure the number is compatible with the
host. Provide utilities to help with those calculations and apply
them where appropriate.
We also revert commit bffed38d4f ("kvm: selftests: aarch64:
dirty_log_test: fix unaligned memslot size") and then use
vm_adjust_num_guest_pages() there instead.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This array will allow us to easily translate modes to their parameter
values.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We're going to want this name in the library code, so use a shorter
name in the tests.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
BITS_PER_LONG and friends are provided by linux/bitops.h
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I'm not sure how we ended up using printf instead of fprintf in
virt_dump(). Fix it.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86_register enum is not used, let's remove it.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
L2 guest calls vmcall and L1 checks the exit status does
correspond.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Tested-by: Wei Huang <wei.huang2@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the basic infrastructure needed to test AMD nested SVM.
This is largely copied from the KVM unit test infrastructure.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
get_gdt_base() and get_idt_base() only return the base address
of the descriptor tables. Soon we will need to get the size as well.
Change the prototype of those functions so that they return
the whole desc_ptr struct instead of the address field.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Wei Huang <wei.huang2@amd.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PPC: Bugfixes
x86:
* Support for mapping DAX areas with large nested page table entries.
* Cleanups and bugfixes here too. A particularly important one is
a fix for FPU load when the thread has TIF_NEED_FPU_LOAD. There is
also a race condition which could be used in guest userspace to exploit
the guest kernel, for which the embargo expired today.
* Fast path for IPI delivery vmexits, shaving about 200 clock cycles
from IPI latency.
* Protect against "Spectre-v1/L1TF" (bring data in the cache via
speculative out of bound accesses, use L1TF on the sibling hyperthread
to read it), which unfortunately is an even bigger whack-a-mole game
than SpectreV1.
Sean continues his mission to rewrite KVM. In addition to a sizable
number of x86 patches, this time he contributed a pretty large refactoring
of vCPU creation that affects all architectures but should not have any
visible effect.
s390 will come next week together with some more x86 patches.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeMxtCAAoJEL/70l94x66DQxIIAJv9hMmXLQHGFnUMskjGErR6
DCLSC0YRdRMwE50CerblyJtGsMwGsPyHZwvZxoAceKJ9w0Yay9cyaoJ87ItBgHoY
ce0HrqIUYqRSJ/F8WH2lSzkzMBr839rcmqw8p1tt4D5DIsYnxHGWwRaaP+5M/1KQ
YKFu3Hea4L00U339iIuDkuA+xgz92LIbsn38svv5fxHhPAyWza0rDEYHNgzMKuoF
IakLf5+RrBFAh6ZuhYWQQ44uxjb+uQa9pVmcqYzzTd5t1g4PV5uXtlJKesHoAvik
Eba8IEUJn+HgQJjhp3YxQYuLeWOwRF3bwOiZ578MlJ4OPfYXMtbdlqCQANHOcGk=
=H/q1
-----END PGP SIGNATURE-----
Merge tag 'kvm-5.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"This is the first batch of KVM changes.
ARM:
- cleanups and corner case fixes.
PPC:
- Bugfixes
x86:
- Support for mapping DAX areas with large nested page table entries.
- Cleanups and bugfixes here too. A particularly important one is a
fix for FPU load when the thread has TIF_NEED_FPU_LOAD. There is
also a race condition which could be used in guest userspace to
exploit the guest kernel, for which the embargo expired today.
- Fast path for IPI delivery vmexits, shaving about 200 clock cycles
from IPI latency.
- Protect against "Spectre-v1/L1TF" (bring data in the cache via
speculative out of bound accesses, use L1TF on the sibling
hyperthread to read it), which unfortunately is an even bigger
whack-a-mole game than SpectreV1.
Sean continues his mission to rewrite KVM. In addition to a sizable
number of x86 patches, this time he contributed a pretty large
refactoring of vCPU creation that affects all architectures but should
not have any visible effect.
s390 will come next week together with some more x86 patches"
* tag 'kvm-5.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
x86/KVM: Clean up host's steal time structure
x86/KVM: Make sure KVM_VCPU_FLUSH_TLB flag is not missed
x86/kvm: Cache gfn to pfn translation
x86/kvm: Introduce kvm_(un)map_gfn()
x86/kvm: Be careful not to clear KVM_VCPU_FLUSH_TLB bit
KVM: PPC: Book3S PR: Fix -Werror=return-type build failure
KVM: PPC: Book3S HV: Release lock on page-out failure path
KVM: arm64: Treat emulated TVAL TimerValue as a signed 32-bit integer
KVM: arm64: pmu: Only handle supported event counters
KVM: arm64: pmu: Fix chained SW_INCR counters
KVM: arm64: pmu: Don't mark a counter as chained if the odd one is disabled
KVM: arm64: pmu: Don't increment SW_INCR if PMCR.E is unset
KVM: x86: Use a typedef for fastop functions
KVM: X86: Add 'else' to unify fastop and execute call path
KVM: x86: inline memslot_valid_for_gpte
KVM: x86/mmu: Use huge pages for DAX-backed files
KVM: x86/mmu: Remove lpage_is_disallowed() check from set_spte()
KVM: x86/mmu: Fold max_mapping_level() into kvm_mmu_hugepage_adjust()
KVM: x86/mmu: Zap any compound page when collapsing sptes
KVM: x86/mmu: Remove obsolete gfn restoration in FNAME(fetch)
...
Local IRQs are reset by a normal cpu reset. The initial cpu reset and
the clear cpu reset, as superset of the normal reset, both clear the
IRQs too.
Let's inject an interrupt to a vCPU before calling a reset and see if
it is gone after the reset.
We choose to inject only an emergency interrupt at this point and can
extend the test to other types of IRQs later.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
[minor fixups]
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20200131100205.74720-7-frankja@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Test if the registers end up having the correct values after a normal,
initial and clear reset.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20200131100205.74720-6-frankja@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add library access to more registers.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20200131100205.74720-5-frankja@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Sync msr-index.h to pull in recent renames of the IA32_FEATURE_CONTROL
MSR definitions. Update KVM's VMX selftest and turbostat accordingly.
Keep the full name in turbostat's output to avoid breaking someone's
workflow, e.g. if a script is looking for the full name.
While using the renamed defines is by no means necessary, do the sync
now to avoid leaving a landmine that will get stepped on the next time
msr-index.h needs to be refreshed for some other reason.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20191221044513.21680-4-sean.j.christopherson@intel.com
The kernel's version of msr-index.h was pulled wholesale into tools by
commit
444e2ff34d ("tools arch x86: Grab a copy of the file containing the MSR numbers"),
Use the common msr-index.h instead of manually redefining everything in
a KVM-only header.
Note, a few MSR-related definitions remain in processor.h because they
are not covered by msr-index.h, including the awesomely named
APIC_BASE_MSR, which refers to starting index of the x2APIC MSRs, not
the actual MSR_IA32_APICBASE, which *is* defined by msr-index.h.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20191221044513.21680-3-sean.j.christopherson@intel.com
The mis-spelling is found by checkpatch.pl, so fix them.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the NMI-window exiting related definitions to match the latest
Intel SDM. No functional changes.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename interrupt-windown exiting related definitions to match the
latest Intel SDM. No functional changes.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On kvm_create_max_vcpus test remove unneeded local
variable in the loop that add vcpus to the VM.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ensure that IA32_XSS appears in KVM_GET_MSR_INDEX_LIST if it can be set
to a non-zero value.
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Change-Id: Ia2d644f69e2d6d8c27d7e0a7a45c2bf9c42bf5ff
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 204c91eff7 ("KVM: selftests: do not blindly clobber registers in
guest asm") was intended to make test more gcc-proof, however, the result
is exactly the opposite: on newer gccs (e.g. 8.2.1) the test breaks with
==== Test Assertion Failure ====
x86_64/sync_regs_test.c:168: run->s.regs.regs.rbx == 0xBAD1DEA + 1
pid=14170 tid=14170 - Invalid argument
1 0x00000000004015b3: main at sync_regs_test.c:166 (discriminator 6)
2 0x00007f413fb66412: ?? ??:0
3 0x000000000040191d: _start at ??:?
rbx sync regs value incorrect 0x1.
Apparently, compile is still free to play games with registers even
when they have variables attached.
Re-write guest code with 'asm volatile' by embedding ucall there and
making sure rbx is preserved.
Fixes: 204c91eff7 ("KVM: selftests: do not blindly clobber registers in guest asm")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vmx_dirty_log_test fails on AMD and this is no surprise as it is VMX
specific. Bail early when nested VMX is unsupported.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vmx_* tests require VMX and three of them implement the same check. Move it
to vmx library.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vmx_set_nested_state_test() checks if VMX is supported twice: in the very
beginning (and skips the whole test if it's not) and before doing
test_vmx_nested_state(). One should be enough.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
similar to commit 2c57da356800 ("selftests: kvm: fix sync_regs_test with
newer gccs") and commit 204c91eff7 ("KVM: selftests: do not blindly
clobber registers in guest asm") we better do not rely on gcc leaving
r11 untouched. We can write the simple ucall inline and have the guest
code completely as small assembler function.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Fix the following build error from "make TARGETS=kvm kselftest":
libkvm.a(assert.o): relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a PIE object; recompile with -fPIC
This error is seen when build is done from the main Makefile using
kselftest target. In this case KBUILD_CPPFLAGS and CC_OPTION_CFLAGS
are defined.
When build is invoked using:
"make -C tools/testing/selftests/kvm" KBUILD_CPPFLAGS and CC_OPTION_CFLAGS
aren't defined.
There is no need to pass in KBUILD_CPPFLAGS and CC_OPTION_CFLAGS for the
check to determine if --no-pie is necessary, which is the case when these
two aren't defined when "make -C tools/testing/selftests/kvm" runs.
Fix it by simplifying the no-pie-option logic. With this change, both
build variations work.
"make TARGETS=kvm kselftest"
"make -C tools/testing/selftests/kvm"
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When KVM_GET_MSRS fail the report looks like
==== Test Assertion Failure ====
lib/x86_64/processor.c:1089: r == nmsrs
pid=28775 tid=28775 - Argument list too long
1 0x000000000040a55f: vcpu_save_state at processor.c:1088 (discriminator 3)
2 0x00000000004010e3: main at state_test.c:171 (discriminator 4)
3 0x00007fb8e69223d4: ?? ??:0
4 0x0000000000401287: _start at ??:?
Unexpected result from KVM_GET_MSRS, r: 36 (failed at 194)
and it's not obvious that '194' here is the failed MSR index and that
it's printed in hex. Change that.
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check that accesses by nested guests are logged according to the
L1 physical addresses rather than L2.
Most of the patch is really adding EPT support to the testing
framework.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After commit e8bb4755eea2("KVM: selftests: Split ucall.c into architecture
specific files") selftests which use ucall on x86 started segfaulting and
apparently it's gcc to blame: it "optimizes" ucall() function throwing away
va_start/va_end part because it thinks the structure is not being used.
Previously, it couldn't do that because the there was also MMIO version and
the decision which particular implementation to use was done at runtime.
With older gccs it's possible to solve the problem by adding 'volatile'
to 'struct ucall' but at least with gcc-8.3 this trick doesn't work.
'memory' clobber seems to do the job.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The bit is supposed to be '1' when SMT is not supported or forcefully
disabled and '0' otherwise.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the duplication code in run_test() of dirty_log_test because
after some reordering of functions now we can directly use the outcome
of vm_create().
Meanwhile, with the new VM_MODE_PXXV48_4K, we can safely revert
b442324b58 too where we stick the x86_64 PA width to 39 bits for
dirty_log_test.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The naming VM_MODE_P52V48_4K is explicit but unclear when used on
x86_64 machines, because x86_64 machines are having various physical
address width rather than some static values. Here's some examples:
- Intel Xeon E3-1220: 36 bits
- Intel Core i7-8650: 39 bits
- AMD EPYC 7251: 48 bits
All of them are using 48 bits linear address width but with totally
different physical address width (and most of the old machines should
be less than 52 bits).
Let's create a new guest mode called VM_MODE_PXXV48_4K for current
x86_64 tests and make it as the default to replace the old naming of
VM_MODE_P52V48_4K because it shows more clearly that the PA width is
not really a constant. Meanwhile we also stop assuming all the x86
machines are having 52 bits PA width but instead we fetch the real
vm->pa_bits from CPUID 0x80000008 during runtime.
We currently make this exclusively used by x86_64 but no other arch.
As a slight touch up, moving DEBUG macro from dirty_log_test.c to
kvm_util.h so lib can use it too.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since we've just removed the dependency of vm type in previous patch,
now we can create the vm much earlier. Note that to move it earlier
we used an approximation of number of extra pages but it should be
fine.
This prepares for the follow up patches to finally remove the
duplication of guest mode parsings.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rather than passing the vm type from the top level to the end of vm
creation, let's simply keep that as an internal of kvm_vm struct and
decide the type in _vm_create(). Several reasons for doing this:
- The vm type is only decided by physical address width and currently
only used in aarch64, so we've got enough information as long as
we're passing vm_guest_mode into _vm_create(),
- This removes a loop dependency between the vm->type and creation of
vms. That's why now we need to parse vm_guest_mode twice sometimes,
once in run_test() and then again in _vm_create(). The follow up
patches will move on to clean up that as well so we can have a
single place to decide guest machine types and so.
Note that this patch will slightly change the behavior of aarch64
tests in that previously most vm_create() callers will directly pass
in type==0 into _vm_create() but now the type will depend on
vm_guest_mode, however it shouldn't affect any user because all
vm_create() users of aarch64 will be using VM_MODE_DEFAULT guest
mode (which is VM_MODE_P40V48_4K) so at last type will still be zero.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that we disallow invalid bits in kvm_valid_regs and kvm_dirty_regs
on s390x, too, we should also check this condition in the selftests.
The code has been taken from the x86-version of the sync_regs_test.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/lkml/20190904085200.29021-3-thuth@redhat.com/
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Check that we can write and read the guest memory with this s390x
ioctl, and that some error cases are handled correctly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lkml.kernel.org/r/20190829130732.580-1-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
test_msr_platform_info_disabled() generates EXIT_SHUTDOWN but VMCB state
is undefined after that so an attempt to launch this guest again from
test_msr_platform_info_enabled() fails. Reorder the tests to make test
pass.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
state_test and smm_test are failing on older processors that do not
have xcr0. This is because on those processor KVM does provide
support for KVM_GET/SET_XSAVE (to avoid having to rely on the older
KVM_GET/SET_FPU) but not for KVM_GET/SET_XCRS.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vmx_set_nested_state_test is trying to use the KVM_STATE_NESTED_EVMCS without
enabling enlightened VMCS first. Correct the outcome of the test, and actually
test that it succeeds after the capability is enabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are two tests already enabling eVMCS and a third is coming.
Add a function that enables the capability and tests the result.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This test is only covering various edge cases of the
KVM_SET_NESTED_STATE ioctl. Running the VM does not really
add anything.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
selftests kvm test cases need pre-required kernel configs for the test
to get pass.
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The kvm_create_max_vcpus test has been moved to the main directory,
and sync_regs_test is now available on s390x, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To run the dirty_log_test on s390x, we have to make sure that we
access the dirty log bitmap with little endian byte ordering and
we have to properly align the memslot of the guest.
Also all dirty bits of a segment are set once on s390x when one
of the pages of a segment are written to for the first time, so
we have to make sure that we touch all pages during the first
iteration to keep the test in sync here.
DEFAULT_GUEST_TEST_MEM needs an adjustment, too. On some s390x
distributions, the ELF binary is linked to address 0x80000000,
so we have to avoid that our test region overlaps into this area.
0xc0000000 seems to be a good alternative that should work on x86
and aarch64, too.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20190731151525.17156-4-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
On s390x, we can neither exit via PIO nor MMIO, but have to use an
instruction like DIAGNOSE. Now that ucall() is implemented, we can
use it in the sync_reg_test on s390x, too.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20190731151525.17156-3-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The way we exit from a guest to userspace is very specific to the
architecture: On x86, we use PIO, on aarch64 we are using MMIO and on
s390x we're going to use an instruction instead. The possibility to
select a type via the ucall_type_t enum is currently also completely
unused, so the code in ucall.c currently looks more complex than
required. Let's split this up into architecture specific ucall.c
files instead, so we can get rid of the #ifdefs and the unnecessary
ucall_type_t handling.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20190731151525.17156-2-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The code in vmx.c does not use "program_invocation_name", so there
is no need to "#define _GNU_SOURCE" here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is the initial implementation for KVM selftests on s390.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=STwX
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: add kselftests
This is the initial implementation for KVM selftests on s390.
Vitaly Kuznetsov