Now that we always early return if we don't have any stats we can remove
these checks as they're no longer necessary.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's not very useful to copy back an empty ethtool_stats struct and
return 0 if we didn't actually have any stats. This also allows for
further simplification of this function in the future commits.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently only the locking order of SRCU vs kvm->slots_arch_lock
and kvm->slots_lock is documented. Extend this to kvm->lock
since Xen emulation got it terribly wrong.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While KVM_XEN_EVTCHN_RESET is usually called with no vCPUs running,
if that happened it could cause a deadlock. This is due to
kvm_xen_eventfd_reset() doing a synchronize_srcu() inside
a kvm->lock critical section.
To avoid this, first collect all the evtchnfd objects in an
array and free all of them once the kvm->lock critical section
is over and th SRCU grace period has expired.
Reported-by: Michal Luczaj <mhal@rbox.co>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The virtblk_map_data() function returns negative error codes, however, the
'nents' field of vbr->sg_table is an unsigned int, which causes the error
handling not to work correctly.
Cc: stable@vger.kernel.org
Fixes: 0e9911fa76 ("virtio-blk: support mq_ops->queue_rqs()")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Message-Id: <20221021204126.927603-1-rafaelmendsr@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Suwan Kim <suwan.kim027@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
In the receive_filter(), should not drop the packet with the
broadcast/multicast address. Add the check for this
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221214054306.24145-1-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
After commit bda324fd03 ("vdpasim: control virtqueue support"),
vdpasim->iommu became an array of IOTLB, so we should clean the
mappings of each free one by one instead of just deleting the ranges
in the first IOTLB which may leak maps.
Fixes: bda324fd03 ("vdpasim: control virtqueue support")
Cc: Gautam Dawar <gautam.dawar@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221213090717.61529-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gautam Dawar <gautam.dawar@amd.com>
For the device without multiqueue feature, we will read 0 as
max_virtqueue_pairs from the config. So if we fill
VDPA_ATTR_DEV_NET_CFG_MAX_VQP with the value we read from the config
we will confuse the user.
Fixing this by only filling the value when multiqueue is offered by
the device so userspace can assume 1 when the attr is not provided.
Fixes: 13b00b135665c("vdpa: Add support for querying vendor statistics")
Cc: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220907060110.4511-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
In vp_vdpa_remove(), the code kfree(&vp_vdpa_mgtdev->mgtdev.id_table) uses
a reference of pointer as the argument of kfree, which is the wrong pointer
and then may hit crash like this:
Unable to handle kernel paging request at virtual address 00ffff003363e30c
Internal error: Oops: 96000004 [#1] SMP
Call trace:
rb_next+0x20/0x5c
ext4_readdir+0x494/0x5c4 [ext4]
iterate_dir+0x168/0x1b4
__se_sys_getdents64+0x68/0x170
__arm64_sys_getdents64+0x24/0x30
el0_svc_common.constprop.0+0x7c/0x1bc
do_el0_svc+0x2c/0x94
el0_svc+0x20/0x30
el0_sync_handler+0xb0/0xb4
el0_sync+0x160/0x180
Code: 54000220 f9400441 b4000161 aa0103e0 (f9400821)
SMP: stopping secondary CPUs
Starting crashdump kernel...
Fixes: ffbda8e9df ("vdpa/vp_vdpa : add vdpa tool support in vp_vdpa")
Signed-off-by: Rong Wang <wangrong68@huawei.com>
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Message-Id: <20221207120813.2837529-1-sunnanyong@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cindy Lu <lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Add a limit to 'config->vq_num' which is user controlled data which
comes from an vduse_ioctl to prevent large memory allocations.
Micheal says - This limit is somewhat arbitrary.
However, currently virtio pci and ccw are limited to a 16 bit vq number.
While MMIO isn't it is also isn't used with lots of VQs due to
current lack of support for per-vq interrupts.
Thus, the 0xffff limit on number of VQs corresponding
to a 16-bit VQ number seems sufficient for now.
This is found using static analysis with smatch.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Message-Id: <20221128155717.2579992-1-harshit.m.mogalapalli@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This gets rid of the last references to smp_read_barrier_depends()
which for the kernel side was removed in v5.9. The serialization
required for Alpha is done inside READ_ONCE() instead of having
users deal with it. Simply use a full barrier, the architecture
does not have rmb in the first place.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Message-Id: <20221128034347.990-3-dave@stgolabs.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
__read_once_size() is not a macro, remove those '/'s.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Message-Id: <20221128034347.990-2-dave@stgolabs.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Replace sprintf with sysfs_emit or its variants for their
built-in PAGE_SIZE awareness.
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Message-Id: <TYCP286MB23232A999FE7DBDF50BA0FAACA0F9@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
'vc_ctrl_req' is alloced in virtio_crypto_alg_skcipher_close_session(),
and should be freed in the invalid ctrl_status->status error handling
case. Otherwise there is a memory leak.
Fixes: 0756ad15b1 ("virtio-crypto: use private buffer for control request")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Message-Id: <20221114110740.537276-1-weiyongjun@huaweicloud.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Acked-by: zhenwei pi<pizhenwei@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Replace "unsigned" with "unsigned int"
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Message-Id: <20221113070742.48271-1-wangjianli@cdjrlc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When we initialize vringh, we should pass the features and the
number of elements in the virtqueue negotiated with the driver,
otherwise operations with vringh may fail.
This was discovered in a case where the driver sets a number of
elements in the virtqueue different from the value returned by
.get_vq_num_max().
In vdpasim_vq_reset() is safe to initialize the vringh with
default values, since the virtqueue will not be used until
vdpasim_queue_ready() is called again.
Fixes: 2c53d0f64c ("vdpasim: vDPA device simulator")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221110141335.62171-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
We use UINT_MAX to limit max_discard_sectors in virtblk_probe,
we can use UINT_MAX to limit max_hw_sectors for consistencies.
No functional change intended.
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Message-Id: <20221110030124.1986-1-angus.chen@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Before commit 3d56987938 ("vhost-vdpa: introduce asid based IOTLB")
we called vhost_vdpa_iotlb_unmap(v, iotlb, 0ULL, 0ULL - 1) during
release to free all the resources allocated when processing user IOTLB
messages through vhost_vdpa_process_iotlb_update().
That commit changed the handling of IOTLB a bit, and we accidentally
removed some code called during the release.
We partially fixed this with commit 037d430556 ("vhost-vdpa: call
vhost_vdpa_cleanup during the release") but a potential memory leak is
still there as showed by kmemleak if the application does not send
VHOST_IOTLB_INVALIDATE or crashes:
unreferenced object 0xffff888007fbaa30 (size 16):
comm "blkio-bench", pid 914, jiffies 4294993521 (age 885.500s)
hex dump (first 16 bytes):
40 73 41 07 80 88 ff ff 00 00 00 00 00 00 00 00 @sA.............
backtrace:
[<0000000087736d2a>] kmem_cache_alloc_trace+0x142/0x1c0
[<0000000060740f50>] vhost_vdpa_process_iotlb_msg+0x68c/0x901 [vhost_vdpa]
[<0000000083e8e205>] vhost_chr_write_iter+0xc0/0x4a0 [vhost]
[<000000008f2f414a>] vhost_vdpa_chr_write_iter+0x18/0x20 [vhost_vdpa]
[<00000000de1cd4a0>] vfs_write+0x216/0x4b0
[<00000000a2850200>] ksys_write+0x71/0xf0
[<00000000de8e720b>] __x64_sys_write+0x19/0x20
[<0000000018b12cbb>] do_syscall_64+0x3f/0x90
[<00000000986ec465>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Let's fix this calling vhost_vdpa_iotlb_unmap() on the whole range in
vhost_vdpa_remove_as(). We move that call before vhost_dev_cleanup()
since we need a valid v->vdev.mm in vhost_vdpa_pa_unmap().
vhost_iotlb_reset() call can be removed, since vhost_vdpa_iotlb_unmap()
on the whole range removes all the entries.
The kmemleak log reported was observed with a vDPA device that has `use_va`
set to true (e.g. VDUSE). This patch has been tested with both types of
devices.
Fixes: 037d430556 ("vhost-vdpa: call vhost_vdpa_cleanup during the release")
Fixes: 3d56987938 ("vhost-vdpa: introduce asid based IOTLB")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221109154213.146789-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
vhost_iotlb_itree_first() requires `start` and `last` parameters
to search for a mapping that overlaps the range.
In translate_desc() we cyclically call vhost_iotlb_itree_first(),
incrementing `addr` by the amount already translated, so rightly
we move the `start` parameter passed to vhost_iotlb_itree_first(),
but we should hold the `last` parameter constant.
Let's fix it by saving the `last` parameter value before incrementing
`addr` in the loop.
Fixes: a9709d6874 ("vhost: convert pre sorted vhost memory array to interval tree")
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221109102503.18816-3-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_iotlb_itree_first() requires `start` and `last` parameters
to search for a mapping that overlaps the range.
In iotlb_translate() we cyclically call vhost_iotlb_itree_first(),
incrementing `addr` by the amount already translated, so rightly
we move the `start` parameter passed to vhost_iotlb_itree_first(),
but we should hold the `last` parameter constant.
Let's fix it by saving the `last` parameter value before incrementing
`addr` in the loop.
Fixes: 9ad9c49cfe ("vringh: IOTLB support")
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221109102503.18816-2-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A problem about modprobe vhost_vsock failed is triggered with the
following log given:
modprobe: ERROR: could not insert 'vhost_vsock': Device or resource busy
The reason is that vhost_vsock_init() returns misc_register() directly
without checking its return value, if misc_register() failed, it returns
without calling vsock_core_unregister() on vhost_transport, resulting the
vhost_vsock can never be installed later.
A simple call graph is shown as below:
vhost_vsock_init()
vsock_core_register() # register vhost_transport
misc_register()
device_create_with_groups()
device_create_groups_vargs()
dev = kzalloc(...) # OOM happened
# return without unregister vhost_transport
Fix by calling vsock_core_unregister() when misc_register() returns error.
Fixes: 433fc58e6b ("VSOCK: Introduce vhost_vsock.ko")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Message-Id: <20221108101705.45981-1-yuancan@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Unneeded semicolon after curly braces, so delete it.
Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com>
Message-Id: <20221105155151.12155-1-dengshaomin@cdjrlc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Virtio_crypto use max_data_queues+1 to setup vqs,
we use vp_modern_get_num_queues to protect the vq range in setup_vq.
We could enter index >= vp_modern_get_num_queues(mdev) in setup_vq
if common->num_queues is not set well,and it return -ENOENT.
It is better to use -EINVAL instead.
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Message-Id: <20221101111655.1947-1-angus.chen@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Variable i is just being incremented and it's never used
anywhere else. The variable and the increment are redundant so
remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Message-Id: <20221024133756.2158497-1-colin.i.king@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use helper function is_power_of_2() to check if num is power of two.
Minor readability improvement.
Signed-off-by: Shaoqin Huang <shaoqin.huang@intel.com>
Message-Id: <20221021062734.228881-3-shaoqin.huang@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Use helper function is_power_of_2() to check if num is power of two.
Minor readability improvement.
Signed-off-by: Shaoqin Huang <shaoqin.huang@intel.com>
Message-Id: <20221021062734.228881-2-shaoqin.huang@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
When qemu uses different address spaces for data and control virtqueues,
the current code would overwrite the control virtqueue iotlb through the
dup_iotlb call. Fix this by referring to the address space identifier
and the group to asid mapping to determine which mapping needs to be
updated. We also move the address space logic from mlx5 net to core
directory.
Reported-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20221114131759.57883-6-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
event_handler runs under atomic context and may not acquire reslock. We
can still guarantee that the handler won't be called after suspend by
clearing nb_registered, unregistering the handler and flushing the
workqueue.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20221114131759.57883-5-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Delete the old MAC from the table and not the new one which is not there
yet.
Fixes: baf2ad3f6a ("vdpa/mlx5: Add RX MAC VLAN filter support")
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20221114131759.57883-4-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Check if VIRTIO_NET_F_CTRL_VLAN is negotiated and return error if
control VQ command is received.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20221114131759.57883-3-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Set the VLAN id to the header values field instead of overwriting the
headers criteria field.
Before this fix, VLAN filtering would not really work and tagged packets
would be forwarded unfiltered to the TIR.
Fixes: baf2ad3f6a ("vdpa/mlx5: Add RX MAC VLAN filter support")
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20221114131759.57883-2-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael Chan says:
====================
bnxt_en: Bug fixes
This series fixes a devlink bug and several XDP related bugs. The
devlink bug causes a kernel crash on VF devices. The XDP driver
patches fix and clean up the RX XDP path and re-enable header-data
split that was disabled by mistake when adding the XDP multi-buffer
support.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The recent XDP multi-buffer feature has introduced regressions in the
setting of HDS and jumbo thresholds. HDS was accidentally disabled in
the nornmal mode without XDP. This patch restores jumbo HDS placement
when not in XDP mode. In XDP multi-buffer mode, HDS should be disabled
and the jumbo threshold should be set to the usable page size in the
first page buffer.
Fixes: 3286123619 ("bnxt: change receive ring space parameters")
Reviewed-by: Mohammad Shuab Siddique <mohammad-shuab.siddique@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The size of the first buffer is always page size, and the useable
space is the page size minus the offset and the skb_shared_info size.
Make sure SKB and XDP buf sizes match so that the skb_shared_info
is at the same offset seen from the SKB and XDP_BUF.
build_skb() should be passed PAGE_SIZE. xdp_init_buff() should
be passed PAGE_SIZE as well. xdp_get_shared_info_from_buff() will
automatically deduct the skb_shared_info size if the XDP buffer
has frags. There is no need to keep bp->xdp_has_frags.
Change BNXT_PAGE_MODE_BUF_SIZE to BNXT_MAX_PAGE_MODE_MTU_SBUF
since this constant is really the MTU with ethernet header size
subtracted.
Also fix the BNXT_MAX_PAGE_MODE_MTU macro with proper parentheses.
Fixes: 3286123619 ("bnxt: change receive ring space parameters")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The XDP program can change the starting address of the RX data buffer and
this information needs to be passed back from bnxt_rx_xdp() to
bnxt_rx_pkt() for the XDP_PASS case so that the SKB can point correctly
to the modified buffer address. Add back the data_ptr parameter to
bnxt_rx_xdp() to make this work.
Fixes: b231c3f341 ("bnxt: refactor bnxt_rx_xdp to separate xdp_init_buff/xdp_prepare_buff")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bnxt_xdp_buff_init() does not modify the data_ptr or the len parameters,
so no need to pass in the addresses of these parameters.
Fixes: b231c3f341 ("bnxt: refactor bnxt_rx_xdp to separate xdp_init_buff/xdp_prepare_buff")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yoshihiro Shimoda says:
====================
net: ethernet: renesas: rswitch: Fix minor issues
This patch series is based on v6.2-rc2.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
To get mac address from device tree which is from each ethernet-port,
fix the first argument of of_get_ethdev_address().
Fixes: 3590918b5d ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If rswitch_init() returns non-zero and this driver is re-probed,
the following error happens:
renesas_eth_sw e6880000.ethernet: Unbalanced pm_runtime_enable!
So, fix error path in renesas_eth_sw_probe().
Fixes: 3590918b5d ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Define a new helper function, virtblk_fail_to_queue(), to
clean up the error handling code in virtio_queue_rq().
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Message-Id: <20221016034127.330942-2-dmitry.fomichev@wdc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio_device vqs_list spinlocks must be initialized before use to
prevent functions that manipulate the device virtualqueues, such as
vring_new_virtqueue(), from blocking indefinitely.
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Message-Id: <20221012062949.1526176-1-ricardo.canuelo@collabora.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
We can merge VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES with
VDPA_ATTR_DEV_FEATURES which is functionally equivalent.
While at it, tweak the comment in header file to make
user provioned device features distinguished from those
supported by the parent mgmtdev device: the former of
which can be inherited as a whole from the latter, or
can be a subset of the latter if explicitly specified.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Message-Id: <1665422823-18364-1-git-send-email-si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Jakub Kicinski says:
====================
netdev doc de-FAQization
We have outgrown the FAQ format for our process doc.
I often find myself struggling to locate information in this doc,
because the questions do not serve well as section headers.
Reformat the document.
v2: update the headers
v1: https://lore.kernel.org/all/20221221184007.1170384-1-kuba@kernel.org/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The netdev-FAQ document has grown over the years to the point
where finding information in it is somewhat challenging.
The length of the questions prevents readers from locating
content that's relevant at a glance.
Convert to a more standard documentation format with sections
and sub-sections rather than questions and answers.
The content edits are limited to what's necessary to change
the format, and very minor clarifications.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subsequent changes will reformat the doc away from FAQ.
To make that more readable perform the pure section moves now.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
At the end of rxrpc_recvmsg(), if a call is found, the call is put and then
a trace line is emitted referencing that call in a couple of places - but
the call may have been deallocated by the time those traces happen.
Fix this by stashing the call debug_id in a variable and passing that to
the tracepoint rather than the call pointer.
Fixes: 849979051c ("rxrpc: Add a tracepoint to follow what recvmsg does")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL-terminated strings.
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Daniil Tatianin