Commit Graph

39 Commits

Author SHA1 Message Date
Bart Van Assche af0d3c13e4 scsi: mvumi: Stop using the SCSI pointer
Set .cmd_size in the SCSI host template instead of using the SCSI pointer
from struct scsi_cmnd. This patch prepares for removal of the SCSI pointer
from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-37-bvanassche@acm.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22 21:11:06 -05:00
Bart Van Assche ca49599907 scsi: mvumi: Call scsi_done() directly
Conditional statements are faster than indirect calls. Hence call
scsi_done() directly.

Link: https://lore.kernel.org/r/20211007202923.2174984-54-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16 21:29:15 -04:00
Bart Van Assche ce425dd7db scsi: mvumi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-32-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11 22:25:40 -04:00
Hannes Reinecke 16576ad8a8 scsi: core: Do not use DRIVER_INVALID
There is no point in returning DID_ABORT together with DRIVER_INVALID, as
the caller couldn't care less where the abort originated.  So drop the use
of DRIVER_INVALID.

Link: https://lore.kernel.org/r/20210427083046.31620-11-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31 22:48:21 -04:00
Hannes Reinecke 464a00c9e0 scsi: core: Kill DRIVER_SENSE
Replace the check for DRIVER_SENSE with a check for
scsi_status_is_check_condition().

Audit all callsites to ensure the SAM status is set correctly. For
backwards compability move the DRIVER_SENSE definition to sg.h, and update
sg, bsg, and scsi_ioctl to set the DRIVER_SENSE driver_status whenever
SAM_STAT_CHECK_CONDITION is present.

[mkp: fix zeroday srp warning]

Link: https://lore.kernel.org/r/20210427083046.31620-10-hare@suse.de
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

fix
2021-05-31 22:48:21 -04:00
Hannes Reinecke f2b1e9c6f8 scsi: core: Introduce scsi_build_sense()
Introduce scsi_build_sense() as a wrapper around scsi_build_sense_buffer()
to format the buffer and set the correct SCSI status.

Link: https://lore.kernel.org/r/20210427083046.31620-8-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31 22:48:21 -04:00
Lee Jones 5ccd626516 scsi: mvumi: Fix formatting and doc-rot issues
Fixes the following W=1 kernel build warning(s):

 drivers/scsi/mvumi.c:191: warning: Function parameter or member 'sg_count' not described in 'mvumi_make_sgl'
 drivers/scsi/mvumi.c:1301: warning: Function parameter or member 'ob_frame' not described in 'mvumi_complete_cmd'
 drivers/scsi/mvumi.c:2084: warning: Function parameter or member 'shost' not described in 'mvumi_queue_command'
 drivers/scsi/mvumi.c:2084: warning: Excess function parameter 'done' description in 'mvumi_queue_command'

Link: https://lore.kernel.org/r/20210317091230.2912389-4-lee.jones@linaro.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Marvell <jyli@marvell.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-18 23:35:54 -04:00
Jiapeng Chong 59f90f5e6c scsi: mvumi: Use true and false for bool variable
Fix the following coccicheck warnings:

./drivers/scsi/mvumi.c:69:9-10: WARNING: return of 0/1 in function
'tag_is_empty' with return type bool.

Link: https://lore.kernel.org/r/1613643371-122635-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-18 22:18:09 -04:00
Vaibhav Gupta 53fdec73c1 scsi: mvumi: Update function description
There is no "device" parameter in mvumi_shutdown(). Instead there is "pdev"
which is not described.

Link: https://lore.kernel.org/r/20201102164730.324035-28-vaibhavgupta40@gmail.com
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-25 23:23:22 -05:00
Vaibhav Gupta 0572edbc32 scsi: mvumi: Use generic power management
Drivers should do only device-specific jobs. But in general, drivers using
legacy PCI PM framework for .suspend()/.resume() have to manage many PCI
PM-related tasks themselves which can be done by PCI Core itself. This
brings extra load on the driver and it directly calls PCI helper functions
to handle them.

Switch to the new generic framework by updating function signatures and
define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove
unnecessary calls to the PCI Helper functions along with the legacy
.suspend & .resume bindings.

Link: https://lore.kernel.org/r/20201102164730.324035-27-vaibhavgupta40@gmail.com
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-25 23:23:22 -05:00
Vaibhav Gupta bd7463cdbe scsi: mvumi: Drop PCI Wakeup calls from .resume
The driver calls pci_enable_wake(...., false) in mvumi_resume(), and there
is no corresponding pci_enable_wake(...., true) in mvumi_suspend().  Either
it should do enable-wake the device in .suspend() or should not invoke
pci_enable_wake() at all.

Concluding that this driver doesn't support enable-wake and PCI core calls
pci_enable_wake(pci_dev, PCI_D0, false) during resume, drop it from
mvumi_resume().

Link: https://lore.kernel.org/r/20201102164730.324035-26-vaibhavgupta40@gmail.com
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-25 23:23:22 -05:00
Tom Rix 170b7d2de2 scsi: Remove unneeded break statements
A break is not needed if it is preceded by a return or goto.

Link: https://lore.kernel.org/r/20201019142333.16584-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-26 18:23:24 -04:00
Jing Xiangfeng 055f15ab2c scsi: mvumi: Fix error return in mvumi_io_attach()
Return PTR_ERR() from the error handling case instead of 0.

Link: https://lore.kernel.org/r/20200910123848.93649-1-jingxiangfeng@huawei.com
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-02 21:42:22 -04:00
Linus Torvalds 1f7563f743 SCSI sg on 20190709
This topic branch covers a fundamental change in how our sg lists are
 allocated to make mq more efficient by reducing the size of the
 preallocated sg list.  This necessitates a large number of driver
 changes because the previous guarantee that if a driver specified
 SG_ALL as the size of its scatter list, it would get a non-chained
 list and didn't need to bother with scatterlist iterators is now
 broken and every driver *must* use scatterlist iterators.
 
 This was broken out as a separate topic because we need to convert all
 the drivers before pulling the trigger and unconverted drivers kept
 being found, necessitating a rebase.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXSTzzCYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZB+AP9I8j/s
 wWfg0Z3WNuf4D5I3rH4x1J3cQTqPJed+RjwgcQEA1gZvtOTg1ZEn/CYMVnaB92x0
 t6MZSchIaFXeqfD+E7U=
 =cv8o
 -----END PGP SIGNATURE-----

Merge tag 'scsi-sg' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI scatter-gather list updates from James Bottomley:
 "This topic branch covers a fundamental change in how our sg lists are
  allocated to make mq more efficient by reducing the size of the
  preallocated sg list.

  This necessitates a large number of driver changes because the
  previous guarantee that if a driver specified SG_ALL as the size of
  its scatter list, it would get a non-chained list and didn't need to
  bother with scatterlist iterators is now broken and every driver
  *must* use scatterlist iterators.

  This was broken out as a separate topic because we need to convert all
  the drivers before pulling the trigger and unconverted drivers kept
  being found, necessitating a rebase"

* tag 'scsi-sg' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits)
  scsi: core: don't preallocate small SGL in case of NO_SG_CHAIN
  scsi: lib/sg_pool.c: clear 'first_chunk' in case of no preallocation
  scsi: core: avoid preallocating big SGL for data
  scsi: core: avoid preallocating big SGL for protection information
  scsi: lib/sg_pool.c: improve APIs for allocating sg pool
  scsi: esp: use sg helper to iterate over scatterlist
  scsi: NCR5380: use sg helper to iterate over scatterlist
  scsi: wd33c93: use sg helper to iterate over scatterlist
  scsi: ppa: use sg helper to iterate over scatterlist
  scsi: pcmcia: nsp_cs: use sg helper to iterate over scatterlist
  scsi: imm: use sg helper to iterate over scatterlist
  scsi: aha152x: use sg helper to iterate over scatterlist
  scsi: s390: zfcp_fc: use sg helper to iterate over scatterlist
  scsi: staging: unisys: visorhba: use sg helper to iterate over scatterlist
  scsi: usb: image: microtek: use sg helper to iterate over scatterlist
  scsi: pmcraid: use sg helper to iterate over scatterlist
  scsi: ipr: use sg helper to iterate over scatterlist
  scsi: mvumi: use sg helper to iterate over scatterlist
  scsi: lpfc: use sg helper to iterate over scatterlist
  scsi: advansys: use sg helper to iterate over scatterlist
  ...
2019-07-11 15:17:41 -07:00
Ming Lei 3c1a30df6d scsi: mvumi: use sg helper to iterate over scatterlist
Unlike the legacy I/O path, scsi-mq preallocates a large array to hold
the scatterlist for each request. This static allocation can consume
substantial amounts of memory on modern controllers which support a
large number of concurrently outstanding requests.

To facilitate a switch to a smaller static allocation combined with a
dynamic allocation for requests that need it, we need to make sure all
SCSI drivers handle chained scatterlists correctly.

Convert remaining drivers that directly dereference the scatterlist
array to using the iterator functions.

[mkp: clarified commit message and folded in build fix reported by zeroday]

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20 15:20:43 -04:00
Thomas Gleixner 873e65bc09 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 167
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation version 2 of the license this program
  is distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not write to the free
  software foundation inc 59 temple place suite 330 boston ma 02111
  1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 83 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.021731668@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:39 -07:00
YueHaibing 7512ddef63 scsi: mvumi: Stop using plain integer as NULL pointer
Fix following sparse warning:

drivers/scsi/mvumi.c:1797:48: warning: Using plain integer as NULL pointer
drivers/scsi/mvumi.c:2143:50: warning: Using plain integer as NULL pointer
drivers/scsi/mvumi.c:755:58: warning: Using plain integer as NULL pointer

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-19 17:46:16 -04:00
Linus Torvalds 92fff53b71 SCSI misc on 20190306
This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
 hisi_sas, target/iscsi and target/core.  Additionally Christoph
 refactored gdth as part of the dma changes.  The major mid-layer
 change this time is the removal of bidi commands and with them the
 whole of the osd/exofs driver and filesystem.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXIC54SYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishT1GAPwJEV23
 ExPiPsnuVgKj49nLTagZ3rILRQcYNbL+MNYqxQEA0cT8FHzSDBfWY5OKPNE+RQ8z
 f69LpXGmMpuagKGvvd4=
 =Fhy1
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
  hisi_sas, target/iscsi and target/core.

  Additionally Christoph refactored gdth as part of the dma changes. The
  major mid-layer change this time is the removal of bidi commands and
  with them the whole of the osd/exofs driver and filesystem. This is a
  major simplification for block and mq in particular"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits)
  scsi: cxgb4i: validate tcp sequence number only if chip version <= T5
  scsi: cxgb4i: get pf number from lldi->pf
  scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c
  scsi: mpt3sas: Add missing breaks in switch statements
  scsi: aacraid: Fix missing break in switch statement
  scsi: kill command serial number
  scsi: csiostor: drop serial_number usage
  scsi: mvumi: use request tag instead of serial_number
  scsi: dpt_i2o: remove serial number usage
  scsi: st: osst: Remove negative constant left-shifts
  scsi: ufs-bsg: Allow reading descriptors
  scsi: ufs: Allow reading descriptor via raw upiu
  scsi: ufs-bsg: Change the calling convention for write descriptor
  scsi: ufs: Remove unused device quirks
  Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  scsi: megaraid_sas: Remove a bunch of set but not used variables
  scsi: clean obsolete return values of eh_timed_out
  scsi: sd: Optimal I/O size should be a multiple of physical block size
  scsi: MAINTAINERS: SCSI initiator and target tweaks
  scsi: fcoe: make use of fip_mode enum complete
  ...
2019-03-09 16:53:47 -08:00
Hannes Reinecke 7df158ce65 scsi: mvumi: use request tag instead of serial_number
Use the request tag for logging instead of the scsi command serial number.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-27 09:19:24 -05:00
Luis Chamberlain 750afb08ca cross-tree: phase out dma_zalloc_coherent()
We already need to zero out memory for dma_alloc_coherent(), as such
using dma_zalloc_coherent() is superflous. Phase it out.

This change was generated with the following Coccinelle SmPL patch:

@ replace_dma_zalloc_coherent @
expression dev, size, data, handle, flags;
@@

-dma_zalloc_coherent(dev, size, handle, flags)
+dma_alloc_coherent(dev, size, handle, flags)

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
[hch: re-ran the script on the latest tree]
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-08 07:58:37 -05:00
Christoph Hellwig 4af14d113b scsi: remove the use_clustering flag
The same effects can be achieved by setting the dma_boundary to
PAGE_SIZE - 1 and the max_segment_size to PAGE_SIZE, so shift those
settings into the drivers.  Note that in many cases the setting might
be bogus, but this keeps the status quo.

[mkp: fix myrs and myrb]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18 23:19:21 -05:00
Christoph Hellwig 4dd4130a72 scsi: make sure all drivers set the use_clustering flag
A few drivers were not setting the use_clustering flag at all and thus
default to disable.  Fix them up to explicitly set this field in
preparation for additional cleanups.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18 23:08:07 -05:00
Christoph Hellwig bddbd00cb0 scsi: mvumi: use dma_set_mask
The driver currently uses pci_set_dma_mask despite otherwise using the
generic DMA API.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-15 14:27:08 -05:00
Christoph Hellwig ab8e7f4bdf scsi: mvumi: switch to generic DMA API
Switch from the legacy PCI DMA API to the generic DMA API.

Also reuse an existing helper (after fixing the error return) to set the
DMA mask instead of having three copies of the code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17 21:58:52 -04:00
Linus Torvalds 5f85942c2e SCSI misc on 20180610
This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc,
 xfcp, hisi_sas, cxlflash, qla2xxx.  In the absence of Nic, we're also
 taking target updates which are mostly minor except for the tcmu
 refactor. The only real core change to worry about is the removal of
 high page bouncing (in sas, storvsc and iscsi).  This has been well
 tested and no problems have shown up so far.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCWx1pbCYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishUucAP42pccS
 ziKyiOizuxv9fZ4Q+nXd1A9zhI5tqqpkHjcQegEA40qiZSi3EKGKR8W0UpX7Ntmo
 tqrZJGojx9lnrAM2RbQ=
 =NMXg
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc,
  xfcp, hisi_sas, cxlflash, qla2xxx.

  In the absence of Nic, we're also taking target updates which are
  mostly minor except for the tcmu refactor.

  The only real core change to worry about is the removal of high page
  bouncing (in sas, storvsc and iscsi). This has been well tested and no
  problems have shown up so far"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits)
  scsi: lpfc: update driver version to 12.0.0.4
  scsi: lpfc: Fix port initialization failure.
  scsi: lpfc: Fix 16gb hbas failing cq create.
  scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc
  scsi: lpfc: correct oversubscription of nvme io requests for an adapter
  scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx)
  scsi: hisi_sas: Mark PHY as in reset for nexus reset
  scsi: hisi_sas: Fix return value when get_free_slot() failed
  scsi: hisi_sas: Terminate STP reject quickly for v2 hw
  scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command
  scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot
  scsi: hisi_sas: Try wait commands before before controller reset
  scsi: hisi_sas: Init disks after controller reset
  scsi: hisi_sas: Create a scsi_host_template per HW module
  scsi: hisi_sas: Reset disks when discovered
  scsi: hisi_sas: Add LED feature for v3 hw
  scsi: hisi_sas: Change common allocation mode of device id
  scsi: hisi_sas: change slot index allocation mode
  scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate()
  scsi: hisi_sas: fix a typo in hisi_sas_task_prep()
  ...
2018-06-10 13:01:12 -07:00
Christoph Hellwig 6600593cbd block: rename BLK_EH_NOT_HANDLED to BLK_EH_DONE
The BLK_EH_NOT_HANDLED implies nothing happen, but very often that
is not what is happening - instead the driver already completed the
command.  Fix the symbolic name to reflect that a little better.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-29 08:59:21 -06:00
YueHaibing f9c25ccfc1 scsi: mvumi: Using module_pci_driver
Remove boilerplate code by using macro module_pci_driver.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-20 19:40:11 -04:00
Alexey Khoroshilov 4bd13a0771 scsi: mvumi: remove code handling zero scsi_sg_count(scmd) case
As Christoph Hellwig noted, SCSI commands that transfer data always have
a SG entry. The patch removes dead code in mvumi_make_sgl(),
mvumi_complete_cmd() and mvumi_timed_out() that handle zero
scsi_sg_count(scmd) case.

Also the patch adds pci_unmap_sg() on failure path in mvumi_make_sgl().

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-24 18:16:49 -04:00
Christoph Hellwig 103eb3b5d0 scsi: mvumi: remove fake transport template
These days we can specify an eh_timed_out handler in the host_template,
so don't have a transport_template definition just for it.

[mkp: fixed typo]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-06 19:08:17 -05:00
Arnd Bergmann fddbeb80a9 scsi: mvumi: use __maybe_unused to hide pm functions
The mvumi scsi hides the references to its suspend/resume functions in
an #ifdef but does not hide the implementation the same way:

drivers/scsi/mvumi.c:2632:12: error: 'mvumi_suspend' defined but not used [-Werror=unused-function]
drivers/scsi/mvumi.c:2651:12: error: 'mvumi_resume' defined but not used [-Werror=unused-function]

This adds __maybe_unused annotations so the compiler knows it can
silently drop them instead of warning, while avoiding the addition of
another #ifdef.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-03-05 17:07:46 -05:00
Tina Ruchandani 36f8ef7f76 mvumi: 64bit value for seconds_since1970
struct mvumi_hs_page2 stores a "seconds_since1970" field which is of
type u64. It is however, written to, using 'struct timeval' which has
a 32-bit seconds field and whose value will overflow in year 2038.
This patch uses ktime_get_real_seconds() instead since it provides a
64-bit seconds value, which is 2038 safe.

Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11 20:45:23 -05:00
Benoit Taine 9baa3c34ac PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to
meet kernel coding style guidelines.  This issue was reported by checkpatch.

A simplified version of the semantic patch that makes this change is as
follows (http://coccinelle.lip6.fr/):

// <smpl>

@@
identifier i;
declarer name DEFINE_PCI_DEVICE_TABLE;
initializer z;
@@

- DEFINE_PCI_DEVICE_TABLE(i)
+ const struct pci_device_id i[]
= z;

// </smpl>

[bhelgaas: add semantic patch]
Signed-off-by: Benoit Taine <benoit.taine@lip6.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-08-12 12:15:14 -06:00
Joe Perches 7c845eb5e1 scsi: use pci_zalloc_consistent
Remove the now unnecessary memset too.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Adam Radford <linuxraid@lsi.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
Cc: Dario Ballabio <ballabio_dario@emc.com>
Cc: Michael Neuffer <mike@i-Connect.Net>
Cc: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Cc: Neela Syam Kolli <megaraidlinux@lsi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:29 -07:00
Jingoo Han 08b7e10716 SCSI: remove unnecessary pci_set_drvdata()
Since commit 0998d06310
(device-core: Ensure drvdata = NULL when no driver is bound),
the driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: James Bottomley <JBottomley@parallels.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-14 15:26:04 +02:00
Myron Stowe c85bcadc78 [SCSI] mvumi: Use PCI_VENDOR_ID_MARVELL_EXT for 0x1b4b
With the 0x1b4b vendor ID #define in place, convert hard-coded ID
values.

Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: James Bottomley <James.Bottomley@hansenpartnership.com>
2013-04-15 14:30:44 -06:00
Greg Kroah-Hartman 6f03979051 Drivers: scsi: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Adam Radford <linuxraid@lsi.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:01 -08:00
Shun Fu bd756ddea1 [SCSI] mvumi: Add support for Marvell SAS/SATA RAID-on-Chip(ROC) 88RC9580
[jejb: fix up for spelling correction patch]
Signed-off-by: Shun Fu <fushun@marvell.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-07 11:34:36 +01:00
Masanari Iida 59e13d4833 scsi: fix various printk and comment typos
Correct spelling typo within drivers/scsi

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-01 08:24:35 -07:00
Jianyun Li f0c568a478 [SCSI] mvumi: Add Marvell UMI driver
The Marvell Universal Message Interface (UMI) defines a messaging
interface between host and Marvell products (Plato, for example). It
considers situations of limited system resource and optimized system
performance.
	UMI driver translates host request to message and sends message
to FW via UMI, FW receives message and processes it, then sends response
to UMI driver.
	FW generates an interrupt when it needs to send information or
response to UMI driver

Signed-off-by: Jianyun Li <jyli@marvell.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27 08:36:58 -06:00