[ Upstream commit acf795dc161f3cf481db20f05db4250714e375e5 ]
ext4_da_map_blocks() only hold i_data_sem in shared mode and i_rwsem
when inserting delalloc extents, it could be raced by another querying
path of ext4_map_blocks() without i_rwsem, .e.g buffered read path.
Suppose we buffered read a file containing just a hole, and without any
cached extents tree, then it is raced by another delayed buffered write
to the same area or the near area belongs to the same hole, and the new
delalloc extent could be overwritten to a hole extent.
pread() pwrite()
filemap_read_folio()
ext4_mpage_readpages()
ext4_map_blocks()
down_read(i_data_sem)
ext4_ext_determine_hole()
//find hole
ext4_ext_put_gap_in_cache()
ext4_es_find_extent_range()
//no delalloc extent
ext4_da_map_blocks()
down_read(i_data_sem)
ext4_insert_delayed_block()
//insert delalloc extent
ext4_es_insert_extent()
//overwrite delalloc extent to hole
This race could lead to inconsistent delalloc extents tree and
incorrect reserved space counter. Fix this by converting to hold
i_data_sem in exclusive mode when adding a new delalloc extent in
ext4_da_map_blocks().
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 0ea6560abb3b ("ext4: check the extent status again before inserting delalloc block")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fcc2b887a1ba4c1f45319cd8c54daa263ecbc36 ]
Refactor and cleanup ext4_da_map_blocks(), reduce some unnecessary
parameters and branches, no logic changes.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 0ea6560abb3b ("ext4: check the extent status again before inserting delalloc block")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98ca62ba9e2be5863c7d069f84f7166b45a5b2f4 ]
Always initialize i_uid/i_gid inside the sysfs core so set_ownership()
can safely skip setting them.
Commit 5ec27ec735 ("fs/proc/proc_sysctl.c: fix the default values of
i_uid/i_gid on /proc/sys inodes.") added defaults for i_uid/i_gid when
set_ownership() was not implemented. It also missed adjusting
net_ctl_set_ownership() to use the same default values in case the
computation of a better value failed.
Fixes: 5ec27ec735 ("fs/proc/proc_sysctl.c: fix the default values of i_uid/i_gid on /proc/sys inodes.")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 520713a93d550406dae14d49cdb8778d70cecdfd ]
Remove the 'table' argument from set_ownership as it is never used. This
change is a step towards putting "struct ctl_table" into .rodata and
eventually having sysctl core only use "const struct ctl_table".
The patch was created with the following coccinelle script:
@@
identifier func, head, table, uid, gid;
@@
void func(
struct ctl_table_header *head,
- struct ctl_table *table,
kuid_t *uid, kgid_t *gid)
{ ... }
No additional occurrences of 'set_ownership' were found after doing a
tree-wide search.
Reviewed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Stable-dep-of: 98ca62ba9e2b ("sysctl: always initialize i_uid/i_gid")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9436a5d0497f759330d07e1189565edd4456be8 ]
All parameters of posix messages queues (queues_max/msg_max/msgsize_max)
end up being limited by RLIMIT_MSGQUEUE. The code in mqueue_get_inode is
where that limiting happens.
The RLIMIT_MSGQUEUE is bound to the user namespace and is counted
hierarchically.
We can allow root in the user namespace to modify the posix messages
queues parameters.
Link: https://lkml.kernel.org/r/6ad67f23d1459a4f4339f74aa73bac0ecf3995e1.1705333426.git.legion@kernel.org
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Link: https://lkml.kernel.org/r/7eb21211c8622e91d226e63416b1b93c079f60ee.1663756794.git.legion@kernel.org
Cc: Christian Brauner <brauner@kernel.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Joel Granados <joel.granados@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 98ca62ba9e2b ("sysctl: always initialize i_uid/i_gid")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50ec499b9a43e46200c9f7b7d723ab2e4af540b3 ]
Patch series "Allow to change ipc/mq sysctls inside ipc namespace", v3.
Right now ipc and mq limits count as per ipc namespace, but only real root
can change them. By default, the current values of these limits are such
that it can only be reduced. Since only root can change the values, it is
impossible to reduce these limits in the rootless container.
We can allow limit changes within ipc namespace because mq parameters are
limited by RLIMIT_MSGQUEUE and ipc parameters are not limited to anything
other than cgroups.
This patch (of 3):
Rootless containers are not allowed to modify kernel IPC parameters.
All default limits are set to such high values that in fact there are no
limits at all. All limits are not inherited and are initialized to
default values when a new ipc_namespace is created.
For new ipc_namespace:
size_t ipc_ns.shm_ctlmax = SHMMAX; // (ULONG_MAX - (1UL << 24))
size_t ipc_ns.shm_ctlall = SHMALL; // (ULONG_MAX - (1UL << 24))
int ipc_ns.shm_ctlmni = IPCMNI; // (1 << 15)
int ipc_ns.shm_rmid_forced = 0;
unsigned int ipc_ns.msg_ctlmax = MSGMAX; // 8192
unsigned int ipc_ns.msg_ctlmni = MSGMNI; // 32000
unsigned int ipc_ns.msg_ctlmnb = MSGMNB; // 16384
The shm_tot (total amount of shared pages) has also ceased to be global,
it is located in ipc_namespace and is not inherited from anywhere.
In such conditions, it cannot be said that these limits limit anything.
The real limiter for them is cgroups.
If we allow rootless containers to change these parameters, then it can
only be reduced.
Link: https://lkml.kernel.org/r/cover.1705333426.git.legion@kernel.org
Link: https://lkml.kernel.org/r/d2f4603305cbfed58a24755aa61d027314b73a45.1705333426.git.legion@kernel.org
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Link: https://lkml.kernel.org/r/e2d84d3ec0172cfff759e6065da84ce0cc2736f8.1663756794.git.legion@kernel.org
Cc: Christian Brauner <brauner@kernel.org>
Cc: Joel Granados <joel.granados@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 98ca62ba9e2b ("sysctl: always initialize i_uid/i_gid")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e90c369cc2ffcf7145a46448de101f715a1f5584 ]
During the probe, driver enables clocks necessary to access registers
(in get_temp()) and then registers thermal zone with managed-resources
(devm) interface. Removal of device is not done in reversed order,
because:
1. Clock will be disabled in driver remove() callback - thermal zone is
still registered and accessible to users,
2. devm interface will unregister thermal zone.
This leaves short window between (1) and (2) for accessing the
get_temp() callback with disabled clock.
Fix this by enabling clock also via devm-interface, so entire cleanup
path will be in proper, reversed order.
Fixes: 8454c8c09c ("thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-1-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f29ecd3748a28d0b52512afc81b3c13fd4a00c9b ]
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: e90c369cc2ff ("thermal/drivers/broadcom: Fix race between removal and clock disable")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf4d6d54eadb60d2ee4d31c9d92299f5e8dcb55c ]
For Gen-1 targets like SDM845, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SDM845 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: ca4db2b538 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-9-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc6ba95c6c4400a84cca5b419b34ae852a08cfb5 ]
For Gen-1 targets like IPQ8074, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for IPQ8074 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 5e09bc51d0 ("arm64: dts: ipq8074: enable USB support")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-3-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0046325ae52079b46da13a7f84dd7b2a6f7c38f8 ]
For Gen-1 targets like MSM8998, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for MSM8998 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 026dad8f58 ("arm64: dts: qcom: msm8998: Add USB-related nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-4-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d930f1750ce30a6c36dbc71f8ff7e20322b94d7 ]
On SC7280, in host mode, it is observed that stressing out controller
results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instances in park mode for SC7280 to mitigate this issue.
Reported-by: Doug Anderson <dianders@google.com>
Cc: stable@vger.kernel.org
Fixes: bb9efa59c6 ("arm64: dts: qcom: sc7280: Add USB related nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240604060659.1449278-3-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b8baed4b88132c12010ce6ca1b56f00d122e376 ]
On SC7180, in host mode, it is observed that stressing out controller
results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instances in park mode for SC7180 to mitigate this issue.
Reported-by: Doug Anderson <dianders@google.com>
Cc: stable@vger.kernel.org
Fixes: 0b766e7fe5 ("arm64: dts: qcom: sc7180: Add USB related nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240604060659.1449278-2-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1c5ae59c0f22f7fe5c07fb5513a29e4aad868c9 ]
Christian noticed that it is possible for a privileged user to mount
most filesystems with a non-initial user namespace in sb->s_user_ns.
When fsopen() is called in a non-init namespace the caller's namespace
is recorded in fs_context->user_ns. If the returned file descriptor is
then passed to a process priviliged in init_user_ns, that process can
call fsconfig(fd_fs, FSCONFIG_CMD_CREATE), creating a new superblock
with sb->s_user_ns set to the namespace of the process which called
fsopen().
This is problematic. We cannot assume that any filesystem which does not
set FS_USERNS_MOUNT has been written with a non-initial s_user_ns in
mind, increasing the risk for bugs and security issues.
Prevent this by returning EPERM from sget_fc() when FS_USERNS_MOUNT is
not set for the filesystem and a non-initial user namespace will be
used. sget() does not need to be updated as it always uses the user
namespace of the current context, or the initial user namespace if
SB_SUBMOUNT is set.
Fixes: cb50b348c7 ("convenience helpers: vfs_get_super() and sget_fc()")
Reported-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Link: https://lore.kernel.org/r/20240724-s_user_ns-fix-v1-1-895d07c94701@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c31fad1470389666ac7169fe43aa65bf5b7e2cfd ]
nvme_map_data() is called when request has physical segments, hence
the nvme_unmap_data() should have same condition to avoid dereference.
Fixes: 4aedb70543 ("nvme-pci: split metadata handling from nvme_map_data / nvme_unmap_data")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 630482ee0653decf9e2482ac6181897eb6cde5b8 ]
In sprd_iommu_cleanup() before calling function sprd_iommu_hw_en()
dom->sdev is equal to NULL, which leads to null dereference.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 9afea57384 ("iommu/sprd: Release dma buffer to avoid memory leak")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Chunyan Zhang <zhang.lyra@gmail.com>
Link: https://lore.kernel.org/r/20240716125522.3690358-1-artem.chernyshev@red-soft.ru
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6ce1f12d777f6ee22b20e10ae6a771e7e6f44f5 ]
Event CF_DIAG reads out complete counter sets using stcctm
instruction. This is done at event start time when the process
starts execution and at event stop time when the process is
removed from the CPU. During removal the difference of each
counter in the counter sets is calculated and saved as raw data
in the ring buffer. This works fine unless the number of counters
in a counter set is zero. This may happen for the extended counter
set. This set is machine specific and the size of the counter
set can be zero even when extended counter set is authorized for
read access.
This case is not handled. cfdiag_diffctr() checks authorization
of the extended counter set. If true the functions assumes
the extended counter set has been saved in a data buffer. However
this is not the case, cfdiag_getctrset() does not save a counter
set with counter set size of zero. This mismatch causes an endless
loop in the counter set readout during event stop handling.
The calculation of the difference of the counters in each counter
now verifies the size of the counter set is non-zero. A counter set
with size zero is skipped.
Fixes: a029a4eab3 ("s390/cpumf: Allow concurrent access for CPU Measurement Counter Facility")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab42fcb511fd9d241bbab7cc3ca04e34e9fc0666 ]
On a PCI adapter that provides up to 8 MSI interrupt sources the s390
implementation of PCI interrupts rejected to accommodate them, although
the underlying hardware is able to support that.
For MSI-X it is sufficient to allocate a single irq_desc per msi_desc,
but for MSI multiple irq descriptors are attached to and controlled by
a single msi descriptor. Add the appropriate loops to maintain multiple
irq descriptors and tie/untie them to/from the appropriate AIBV bit, if
a device driver allocates more than 1 MSI interrupt.
Common PCI code passes on requests to allocate a number of interrupt
vectors based on the device drivers' demand and the PCI functions'
capabilities. However, the root-complex of s390 systems support just a
limited number of interrupt vectors per PCI function.
Produce a kernel log message to inform about any architecture-specific
capping that might be done.
With this change, we had a PCI adapter successfully raising
interrupts to its device driver via all 8 sources.
Fixes: a384c8924a ("s390/PCI: Fix single MSI only check")
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fd11b96b43708f2f6e3964412c301c1bd20ec0f ]
Factor out adapter interrupt allocation from arch_setup_msi_irqs() in
preparation for enabling registration of multiple MSIs. Code movement
only, no change of functionality intended.
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Stable-dep-of: ab42fcb511fd ("s390/pci: Allow allocation of more than 1 MSI interrupt")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03230edb0bd831662a7c08b6fef66b2a9a817774 ]
The kmalloc size of pagevec mempool is incorrectly calculated.
It misses the size of page pointer and only accounts the number for the array.
Fixes: a0102bda5b ("ceph: move sb->wb_pagevec_pool to be a global mempool")
Signed-off-by: ethanwu <ethanwu@synology.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92c78222168e9035a9bfb8841c2e56ce23e51f73 ]
This function has a reversed if statement so it's either a no-op or it
leads to a NULL dereference.
Fixes: b195acf5266d ("ASoC: tas2781: Fix wrong loading calibrated data sequence")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/18a29b68-cc85-4139-b7c7-2514e8409a42@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9931f7d5d251882a147cc5811060097df43e79f5 ]
the Intel kbuild bot reports a link failure when IOSF_MBI is built-in
but the Merrifield driver is configured as a module. The
soc-intel-quirks.h is included for Merrifield platforms, but IOSF_MBI
is not selected for that platform.
ld.lld: error: undefined symbol: iosf_mbi_read
>>> referenced by atom.c
>>> sound/soc/sof/intel/atom.o:(atom_machine_select) in archive vmlinux.a
This patch forces the use of the fallback static inline when IOSF_MBI is not reachable.
Fixes: 536cfd2f37 ("ASoC: Intel: use common helpers to detect CPUs")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407160704.zpdhJ8da-lkp@intel.com/
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240722083002.10800-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc28d1c1fe3b3e2fbc50834c8f73dda72f6af9fc ]
When Maxime originally added the BH2228FV to the spidev driver, he spelt
it incorrectly - the d should have been a b. Add the correctly spelt
compatible to the driver. Although the majority of users of this
compatible are abusers, there is at least one board that validly uses
the incorrect spelt compatible, so keep it in the driver to avoid
breaking the few real users it has.
Fixes: 8fad805bdc ("spi: spidev: Add Rohm DH2228FV DAC compatible string")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20240717-ventricle-strewn-a7678c509e85@spud
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2038c12e8133bf4c6bd4d1127a23310d55d9e21 ]
Setting ACP ACLK as clock source when ACP enters D0 state causing
firmware load failure, as per design clock source should be internal
clock.
Remove acp_clkmux_sel field so that ACP will use internal clock
source when ACP enters into D0 state.
Fixes: d0dab6b76a ("ASoC: SOF: amd: Add sof support for vangogh platform")
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20240718062004.581685-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92fc2c469eb26060384e9b2cd4cb0cc228aba582 ]
pcie_aspm=off tells the kernel not to modify the ASPM configuration. This
setting does not guarantee that ASPM (Active State Power Management) is
disabled. Hence add pcie_port_pm=off. This disables power management for
all PCIe ports.
This patch has been tested on a workstation with a Samsung SSD 970 EVO Plus
NVMe SSD.
Fixes: 4641a8e6e1 ("nvme-pci: add trouble shooting steps for timeouts")
Cc: Keith Busch <kbusch@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cf71eb0faef4bff01df4264841b8465382d7927 ]
While transmitting with rx_len == 0, the RX FIFO is not going to be
emptied in the interrupt handler. A subsequent transfer could then
read crap from the previous transfer out of the RX FIFO into the
start RX buffer. The core provides a register that will empty the RX and
TX FIFOs, so do that before each transfer.
Fixes: 9ac8d17694 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240715-flammable-provoke-459226d08e70@wendy
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a5e76283672efddf47cea39ccfe9f5735cc91d5 ]
mchp_corespi_init() reads the CONTROL register, sets the master and
motorola bits, but doesn't write the value back to the register. The
function also doesn't ensure the controller is disabled at the start,
which may present a problem if the controller was used by an
earlier boot stage as some settings (including the mode) can only be
modified while the controller is disabled.
Fixes: 9ac8d17694 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240715-designing-thus-05f7c26e1da7@wendy
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f8bf52ed5b76fc7958b0fbe3131540aecdff8ac ]
Change legacy name master/slave to modern name host/target or controller.
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230823033003.3407403-7-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 3a5e76283672 ("spi: microchip-core: fix init function not setting the master and motorola modes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de9850b5c606b754dd7861678d6e2874b96b04f8 ]
Setting up many of the registers for a new SPI transfer involves
unconditionally disabling the SPI controller, writing the register
value and re-enabling the controller. This is being done for registers
even when the value is unchanged and is also done for registers that
don't require the controller to be disabled for the change to take
effect. Make an effort to detect changes to the register values, and
only disables the controller if the new register value is different
and disabling the controller is required. This stops the controller
being repeated disabled and the bus going tristate before every
transfer.
Fixes: 9ac8d17694 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240715-depict-twirl-7e592eeabaad@wendy
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22fd98c107c792e35db7abe45298bc3a29bf4723 ]
Setting up many of the registers for a new SPI transfer requires the
SPI controller to be disabled after set_cs() has been called to assert
the chip select line. However, disabling the controller results in the
SCLK and MOSI output pins being tristate, which can cause clock
transitions to be seen by a slave device whilst SS is active. To fix
this, the CS is only set to inactive inline, whilst setting it active
is deferred until all registers are set up and the any controller
disables have been completed.
Fixes: 9ac8d17694 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240715-sanitizer-recant-dd96b7a97048@wendy
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 502a582b8dd897d9282db47c0911d5320ef2e6b9 ]
It is possible for the TXDONE interrupt be raised if the tx FIFO becomes
temporarily empty while transmitting, resulting in recursive calls to
mchp_corespi_write_fifo() and therefore a garbage message might be
transmitted depending on when the interrupt is triggered. Moving all of
the tx FIFO writes out of the TXDONE portion of the interrupt handler
avoids this problem.
Most of rest of the TXDONE portion of the handler is problematic too.
Only reading the rx FIFO (and finalising the transfer) when the TXDONE
interrupt is raised can cause the transfer to stall, if the final bytes
of rx data are not available in the rx FIFO when the final TXDONE
interrupt is raised. The transfer should be finalised regardless of
which interrupt is raised, provided that all tx data has been set and
all rx data received.
The first issue was encountered "in the wild", the second is
theoretical.
Fixes: 9ac8d17694 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Naga Sureshkumar Relli <nagasuresh.relli@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240715-candied-deforest-585685ef3c8a@wendy
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2634f745eac25a33f032df32cf98fca8538a534a ]
According to Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
fsl,dsp-ctrl is a phandle to syscon block so we need to use correct
function to retrieve it.
Currently there is no SOF DSP DTS merged into mainline so there is no
need to support the old way of retrieving the dsp control node.
Fixes: 9ba23717b2 ("ASoC: SOF: imx8m: Implement DSP start")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20240715151653.114751-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ccfe94bc3ac980d2d1df9f7a0b2c6d2137abe55 ]
The reference count is bumped by device_get_named_child_node()
and never dropped. Since LED APIs do not require it to be
bumped by the user, drop the reference after LED registration.
[andy: rewritten the commit message and amended the change]
Fixes: c223d9c636 ("auxdisplay: ht16k33: Add LED support")
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4cf5fc01ce83e5c0bcf3dbb9f929428646b9098 ]
missing fdput() on one of the failure exits
Fixes: eacc56bb9d # v5.2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d745cd0e9720282cd291d36b9db528aea18add2 ]
struct nexthop_grp contains two reserved fields that are not initialized by
nla_put_nh_group(), and carry garbage. This can be observed e.g. with
strace (edited for clarity):
# ip nexthop add id 1 dev lo
# ip nexthop add id 101 group 1
# strace -e recvmsg ip nexthop get id 101
...
recvmsg(... [{nla_len=12, nla_type=NHA_GROUP},
[{id=1, weight=0, resvd1=0x69, resvd2=0x67}]] ...) = 52
The fields are reserved and therefore not currently used. But as they are, they
leak kernel memory, and the fact they are not just zero complicates repurposing
of the fields for new ends. Initialize the full structure.
Fixes: 430a049190 ("nexthop: Add support for nexthop groups")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9dbebae2e3c338122716914fe105458f41e3a4a ]
The perfect_match parameter of the update_vlan_hash operation is __le16,
and is correctly converted from host byte-order in the lone caller,
stmmac_vlan_update().
However, the implementations of this caller, dwxgmac2_update_vlan_hash()
and dwxgmac2_update_vlan_hash(), both treat this parameter as host byte
order, using the following pattern:
u32 value = ...
...
writel(value | perfect_match, ...);
This is not correct because both:
1) value is host byte order; and
2) writel expects a host byte order value as it's first argument
I believe that this will break on big endian systems. And I expect it
has gone unnoticed by only being exercised on little endian systems.
The approach taken by this patch is to update the callback, and it's
caller to simply use a host byte order value.
Flagged by Sparse.
Compile tested only.
Fixes: c7ab0b8088 ("net: stmmac: Fallback to VLAN Perfect filtering if HASH is not available")
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa96c6baef1b5385e2f0c0677b32b3839e716076 ]
tipc_udp_addr2str() should return non-zero value if the UDP media
address is invalid. Otherwise, a buffer overflow access can occur in
tipc_media_addr_printf(). Fix this by returning 1 on an invalid UDP
media address.
Fixes: d0f91938be ("tipc: add ip/udp media type")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@endava.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a16909ae9982e931841c456061cb57fbaec9c59e ]
We need to disable softinterrupts, else we get following problem:
1. pipapo_avx2 called from process context; fpu usable
2. preempt_disable() called, pcpu scratchmap in use
3. softirq handles rx or tx, we re-enter pipapo_avx2
4. fpu busy, fallback to generic non-avx version
5. fallback reuses scratch map and index, which are in use
by the preempted process
Handle this same way as generic version by first disabling
softinterrupts while the scratchmap is in use.
Fixes: f0b3d33806 ("netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check, fallback to non-AVX2 version")
Cc: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19abb9c2b900bad59e0a9818d6c83bb4cc875437 ]
When ice driver reads recipes from firmware information about
need_pass_l2 and allow_pass_l2 flags is not stored correctly.
Those flags are stored as one bit each in ice_sw_recipe structure.
Because of that, the result of checking a flag has to be casted to bool.
Note that the need_pass_l2 flag currently works correctly, because
it's stored in the first bit.
Fixes: bccd9bce29 ("ice: Add guard rule when creating FDB in switchdev")
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Yi