[ Upstream commit f6c29f710c1ff2590109f83be3e212b86c01e0f3 ]
If a SMBus alert is received and the originating device is not found,
the reason may be that the address reported on the SMBus alert address
is corrupted, for example because multiple devices asserted alert and
do not correctly implement SMBus arbitration.
If this happens, call alert handlers on all devices connected to the
given I2C bus, in the hope that this cleans up the situation.
This change reliably fixed the problem on a system with multiple devices
on a single bus. Example log where the device on address 0x18 (ADM1021)
and on address 0x4c (ADT7461A) both had the alert line asserted:
smbus_alert 3-000c: SMBALERT# from dev 0x0c, flag 0
smbus_alert 3-000c: no driver alert()!
smbus_alert 3-000c: SMBALERT# from dev 0x0c, flag 0
smbus_alert 3-000c: no driver alert()!
lm90 3-0018: temp1 out of range, please check!
lm90 3-0018: Disabling ALERT#
lm90 3-0029: Everything OK
lm90 3-002a: Everything OK
lm90 3-004c: temp1 out of range, please check!
lm90 3-004c: temp2 out of range, please check!
lm90 3-004c: Disabling ALERT#
Fixes: b5527a7766 ("i2c: Add SMBus alert support")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[wsa: fixed a typo in the commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7354eb7f1558466e92e926802d36e69e42938ea9 ]
Default firmware shipped in open source are not licensed for 3P
libraries, therefore topologies should not reference them.
If a OS wants to use 3P (that they have licensed) then they should use
the appropriate topology override mechanisms.
Fixes: 8a7d5d85ed ("ASoC: SOF: mediatek: mt8195: Add devicetree support to select topologies")
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Cc: Wojciech Macek <wmacek@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240731212153.921327-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4c4638b6a10427d30e29d22351c375886025f47 ]
When the of_device_id entry for "rohm,bh2228fv" was added, the
corresponding spi_device_id was forgotten, causing a warning message
during boot-up:
SPI driver spidev has no spi_device_id for rohm,bh2228fv
Fix module autoloading and shut up the warning by adding the missing
entry.
Fixes: fc28d1c1fe3b3e2f ("spi: spidev: add correct compatible for Rohm BH2228FV")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/cb571d4128f41175f31319cd9febc829417ea167.1722346539.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b99068d5ea0aa295f15f30afc98db74d056ec7b ]
This patch addresses a regression in the ASoC STI drivers that was
introduced in Linux version 6.6.y. The issue originated from a series of
patches (see https://lore.kernel.org/all/87wmy5b0wt.wl-kuninori.morimoto.gx@renesas.com/)
that unintentionally omitted necessary probe functions for the player
and reader components.
Probe function in `sound/soc/sti/sti_uniperif.c:415` is being replaced
by another probe function located at `sound/soc/sti/sti_uniperif.c:453`,
which should instead be derived from the player and reader components.
This patch correctly reinserts the missing probe entries,
restoring the intended functionality.
Fixes: 9f625f5e6c ("ASoC: sti: merge DAI call back functions into ops")
Signed-off-by: Jerome Audu <jau@free.fr>
Link: https://patch.msgid.link/20240727-sti-audio-fix-v2-1-208bde546c3f@free.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcb6631d05152930e2ea70fd2abfd811b0e970b5 ]
Device has up to WSA884X_MAX_SWR_PORTS number of ports and the array
assigned to prop.sink_dpn_prop has 0..WSA884X_MAX_SWR_PORTS-1 elements.
On the other hand, GENMASK(high, low) creates an inclusive mask between
<high, low>, so we need the mask from 0 up to WSA884X_MAX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Fixes: aa21a7d4f6 ("ASoC: codecs: wsa884x: Add WSA884x family of speakers")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240726-asoc-wcd-wsa-swr-ports-genmask-v1-6-d4d7a8b56f05@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1bc5c324bcca3acdbe817ccbf9aa7992d89479d ]
Add support to parse static master port map information from device tree.
This is required for correct port mapping between soundwire device and
master ports.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240626-port-map-v2-4-6cc1c5608cdd@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: dcb6631d0515 ("ASoC: codecs: wsa884x: Correct Soundwire ports mask")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6801ac36f25690e14955f7f9eace1eaa29edbdd0 ]
Device has up to WSA883X_MAX_SWR_PORTS number of ports and the array
assigned to prop.sink_dpn_prop has 0..WSA883X_MAX_SWR_PORTS-1 elements.
On the other hand, GENMASK(high, low) creates an inclusive mask between
<high, low>, so we need the mask from 0 up to WSA883X_MAX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Fixes: 43b8c7dc85 ("ASoC: codecs: add wsa883x amplifier support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240726-asoc-wcd-wsa-swr-ports-genmask-v1-5-d4d7a8b56f05@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb11c3bb64ad0a05aeacdb01039863aa2aa3614b ]
Device has up to WSA881X_MAX_SWR_PORTS number of ports and the array
assigned to prop.sink_dpn_prop has 0..WSA881X_MAX_SWR_PORTS-1 elements.
On the other hand, GENMASK(high, low) creates an inclusive mask between
<high, low>, so we need the mask from 0 up to WSA881X_MAX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Fixes: a0aab9e140 ("ASoC: codecs: add wsa881x amplifier support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240726-asoc-wcd-wsa-swr-ports-genmask-v1-4-d4d7a8b56f05@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f6fb03dae9c7dfba7670858d29e03c8faaa89fe ]
Device has up to WCD938X_MAX_SWR_PORTS number of ports and the array
assigned to prop.src_dpn_prop and prop.sink_dpn_prop has
0..WCD938X_MAX_SWR_PORTS-1 elements. On the other hand, GENMASK(high,
low) creates an inclusive mask between <high, low>, so we need the mask
from 0 up to WCD938X_MAX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Fixes: 16572522ae ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240726-asoc-wcd-wsa-swr-ports-genmask-v1-2-d4d7a8b56f05@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37c526f00bc1c4f847fc800085f8f009d2e11be6 ]
The following messages were observed while testing alert functionality
on systems with multiple I2C devices on a single bus if alert was active
on more than one chip.
smbus_alert 3-000c: SMBALERT# from dev 0x0c, flag 0
smbus_alert 3-000c: no driver alert()!
and:
smbus_alert 3-000c: SMBALERT# from dev 0x28, flag 0
Once it starts, this message repeats forever at high rate. There is no
device at any of the reported addresses.
Analysis shows that this is seen if multiple devices have the alert pin
active. Apparently some devices do not support SMBus arbitration correctly.
They keep sending address bits after detecting an address collision and
handle the collision not at all or too late.
Specifically, address 0x0c is seen with ADT7461A at address 0x4c and
ADM1021 at address 0x18 if alert is active on both chips. Address 0x28 is
seen with ADT7483 at address 0x2a and ADT7461 at address 0x4c if alert is
active on both chips.
Once the system is in bad state (alert is set by more than one chip),
it often only recovers by power cycling.
To reduce the impact of this problem, abort the endless loop in
smbus_alert() if the same address is read more than once and not
handled by a driver.
Fixes: b5527a7766 ("i2c: Add SMBus alert support")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[wsa: it also fixed an interrupt storm in one of my experiments]
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
[wsa: rebased, moved a comment as well, improved the 'invalid' value]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit adeec61a4723fd3e39da68db4cc4d924e6d7f641 ]
A number of Arm Ltd CPUs suffer from errata whereby an MSR to the SSBS
special-purpose register does not affect subsequent speculative
instructions, permitting speculative store bypassing for a window of
time.
We worked around this for a number of CPUs in commits:
* 7187bb7d0b5c7dfa ("arm64: errata: Add workaround for Arm errata 3194386 and 3312417")
* 75b3c43eab594bfb ("arm64: errata: Expand speculative SSBS workaround")
Since then, similar errata have been published for a number of other Arm
Ltd CPUs, for which the same mitigation is sufficient. This is described
in their respective Software Developer Errata Notice (SDEN) documents:
* Cortex-A76 (MP052) SDEN v31.0, erratum 3324349
https://developer.arm.com/documentation/SDEN-885749/3100/
* Cortex-A77 (MP074) SDEN v19.0, erratum 3324348
https://developer.arm.com/documentation/SDEN-1152370/1900/
* Cortex-A78 (MP102) SDEN v21.0, erratum 3324344
https://developer.arm.com/documentation/SDEN-1401784/2100/
* Cortex-A78C (MP138) SDEN v16.0, erratum 3324346
https://developer.arm.com/documentation/SDEN-1707916/1600/
* Cortex-A78C (MP154) SDEN v10.0, erratum 3324347
https://developer.arm.com/documentation/SDEN-2004089/1000/
* Cortex-A725 (MP190) SDEN v5.0, erratum 3456106
https://developer.arm.com/documentation/SDEN-2832921/0500/
* Cortex-X1 (MP077) SDEN v21.0, erratum 3324344
https://developer.arm.com/documentation/SDEN-1401782/2100/
* Cortex-X1C (MP136) SDEN v16.0, erratum 3324346
https://developer.arm.com/documentation/SDEN-1707914/1600/
* Neoverse-N1 (MP050) SDEN v32.0, erratum 3324349
https://developer.arm.com/documentation/SDEN-885747/3200/
* Neoverse-V1 (MP076) SDEN v19.0, erratum 3324341
https://developer.arm.com/documentation/SDEN-1401781/1900/
Note that due to the manner in which Arm develops IP and tracks errata,
some CPUs share a common erratum number and some CPUs have multiple
erratum numbers for the same HW issue.
On parts without SB, it is necessary to use ISB for the workaround. The
spec_bar() macro used in the mitigation will expand to a "DSB SY; ISB"
sequence in this case, which is sufficient on all affected parts.
Enable the existing mitigation by adding the relevant MIDRs to
erratum_spec_ssbs_list. The list is sorted alphanumerically (involving
moving Neoverse-V3 after Neoverse-V2) so that this is easy to audit and
potentially extend again in future. The Kconfig text is also updated to
clarify the set of affected parts and the mitigation.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240801101803.1982459-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: fix conflicts in silicon-errata.rst ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ef54a384526911095db465e77acc1cb5266b32c ]
Add cputype definitions for Cortex-A725. These will be used for errata
detection in subsequent patches.
These values can be found in the Cortex-A725 TRM:
https://developer.arm.com/documentation/107652/0001/
... in table A-247 ("MIDR_EL1 bit descriptions").
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20240801101803.1982459-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58d245e03c324d083a0ec3b9ab8ebd46ec9848d7 ]
Add cputype definitions for Cortex-X1C. These will be used for errata
detection in subsequent patches.
These values can be found in the Cortex-X1C TRM:
https://developer.arm.com/documentation/101968/0002/
... in section B2.107 ("MIDR_EL1, Main ID Register, EL1").
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20240801101803.1982459-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec768766608092087dfb5c1fc45a16a6f524dee2 ]
Cortex-X4 erratum 3194386 and Neoverse-V3 erratum 3312417 are identical,
with duplicate Kconfig text and some unsightly ifdeffery. While we try
to share code behind CONFIG_ARM64_WORKAROUND_SPECULATIVE_SSBS, having
separate options results in a fair amount of boilerplate code, and this
will only get worse as we expand the set of affected CPUs.
To reduce this boilerplate, unify the two behind a common Kconfig
option. This removes the duplicate text and Kconfig logic, and removes
the need for the intermediate ARM64_WORKAROUND_SPECULATIVE_SSBS option.
The set of affected CPUs is described as a list so that this can easily
be extended.
I've used ARM64_ERRATUM_3194386 (matching the Neoverse-V3 erratum ID) as
the common option, matching the way we use ARM64_ERRATUM_1319367 to
cover Cortex-A57 erratum 1319537 and Cortex-A72 erratum 1319367.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240603111812.1514101-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: fix conflicts, drop unneeded cpucaps.h ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd2ff5f0b320f418288e7a1f919f648fbc8a0dfc ]
Add cputype definitions for Cortex-X925. These will be used for errata
detection in subsequent patches.
These values can be found in Table A-285 ("MIDR_EL1 bit descriptions")
in issue 0001-05 of the Cortex-X925 TRM, which can be found at:
https://developer.arm.com/documentation/102807/0001/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240603111812.1514101-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit add332c40328cf06fe35e4b3cde8ec315c4629e5 ]
Add cputype definitions for Cortex-A720. These will be used for errata
detection in subsequent patches.
These values can be found in Table A-186 ("MIDR_EL1 bit descriptions")
in issue 0002-05 of the Cortex-A720 TRM, which can be found at:
https://developer.arm.com/documentation/102530/0002/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240603111812.1514101-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be5a6f238700f38b534456608588723fba96c5ab ]
Add cputype definitions for Cortex-X3. These will be used for errata
detection in subsequent patches.
These values can be found in Table A-263 ("MIDR_EL1 bit descriptions")
in issue 07 of the Cortex-X3 TRM, which can be found at:
https://developer.arm.com/documentation/101593/0102/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240603111812.1514101-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7187bb7d0b5c7dfa18ca82e9e5c75e13861b1d88 ]
Cortex-X4 and Neoverse-V3 suffer from errata whereby an MSR to the SSBS
special-purpose register does not affect subsequent speculative
instructions, permitting speculative store bypassing for a window of
time. This is described in their Software Developer Errata Notice (SDEN)
documents:
* Cortex-X4 SDEN v8.0, erratum 3194386:
https://developer.arm.com/documentation/SDEN-2432808/0800/
* Neoverse-V3 SDEN v6.0, erratum 3312417:
https://developer.arm.com/documentation/SDEN-2891958/0600/
To workaround these errata, it is necessary to place a speculation
barrier (SB) after MSR to the SSBS special-purpose register. This patch
adds the requisite SB after writes to SSBS within the kernel, and hides
the presence of SSBS from EL0 such that userspace software which cares
about SSBS will manipulate this via prctl(PR_GET_SPECULATION_CTRL, ...).
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240508081400.235362-5-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: fix conflicts, drop unneeded cpucaps.h, fold in user_feature_fixup() ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ce85db6c2141b7ffb95709d76fc55a27ff3cdc1 ]
Add cputype definitions for Neoverse-V3. These will be used for errata
detection in subsequent patches.
These values can be found in Table B-249 ("MIDR_EL1 bit descriptions")
in issue 0001-04 of the Neoverse-V3 TRM, which can be found at:
https://developer.arm.com/documentation/107734/0001/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240508081400.235362-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02a0a04676fa7796d9cbc9eb5ca120aaa194d2dd ]
Add cputype definitions for Cortex-X4. These will be used for errata
detection in subsequent patches.
These values can be found in Table B-249 ("MIDR_EL1 bit descriptions")
in issue 0002-05 of the Cortex-X4 TRM, which can be found at:
https://developer.arm.com/documentation/102484/0002/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240508081400.235362-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: fix conflict (dealt with upstream via a later merge) ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebfc726eae3f31bdb5fae1bbd74ef235d71046ca ]
Upcoming errata workarounds will need to use SB from C code. Restore the
spec_bar() macro so that we can use SB.
This is effectively a revert of commit:
4f30ba1cce ("arm64: barrier: Remove spec_bar() macro")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240508081400.235362-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4d9d9dcc70b96b5e5d7801bd5fbf8491b07b13d ]
Add the part number and MIDR for Neoverse-V2
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240109192310.16234-2-bwicaksono@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 89add40066f9ed9abe5f7f886fe5789ff7e0c50e upstream.
Tighten csum_start and csum_offset checks in virtio_net_hdr_to_skb
for GSO packets.
The function already checks that a checksum requested with
VIRTIO_NET_HDR_F_NEEDS_CSUM is in skb linear. But for GSO packets
this might not hold for segs after segmentation.
Syzkaller demonstrated to reach this warning in skb_checksum_help
offset = skb_checksum_start_offset(skb);
ret = -EINVAL;
if (WARN_ON_ONCE(offset >= skb_headlen(skb)))
By injecting a TSO packet:
WARNING: CPU: 1 PID: 3539 at net/core/dev.c:3284 skb_checksum_help+0x3d0/0x5b0
ip_do_fragment+0x209/0x1b20 net/ipv4/ip_output.c:774
ip_finish_output_gso net/ipv4/ip_output.c:279 [inline]
__ip_finish_output+0x2bd/0x4b0 net/ipv4/ip_output.c:301
iptunnel_xmit+0x50c/0x930 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x2296/0x2c70 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x759/0xa60 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4850 [inline]
netdev_start_xmit include/linux/netdevice.h:4864 [inline]
xmit_one net/core/dev.c:3595 [inline]
dev_hard_start_xmit+0x261/0x8c0 net/core/dev.c:3611
__dev_queue_xmit+0x1b97/0x3c90 net/core/dev.c:4261
packet_snd net/packet/af_packet.c:3073 [inline]
The geometry of the bad input packet at tcp_gso_segment:
[ 52.003050][ T8403] skb len=12202 headroom=244 headlen=12093 tailroom=0
[ 52.003050][ T8403] mac=(168,24) mac_len=24 net=(192,52) trans=244
[ 52.003050][ T8403] shinfo(txflags=0 nr_frags=1 gso(size=1552 type=3 segs=0))
[ 52.003050][ T8403] csum(0x60000c7 start=199 offset=1536
ip_summed=3 complete_sw=0 valid=0 level=0)
Mitigate with stricter input validation.
csum_offset: for GSO packets, deduce the correct value from gso_type.
This is already done for USO. Extend it to TSO. Let UFO be:
udp[46]_ufo_fragment ignores these fields and always computes the
checksum in software.
csum_start: finding the real offset requires parsing to the transport
header. Do not add a parser, use existing segmentation parsing. Thanks
to SKB_GSO_DODGY, that also catches bad packets that are hw offloaded.
Again test both TSO and USO. Do not test UFO for the above reason, and
do not test UDP tunnel offload.
GSO packet are almost always CHECKSUM_PARTIAL. USO packets may be
CHECKSUM_NONE since commit 10154dbded6d6 ("udp: Allow GSO transmit
from devices with no checksum offload"), but then still these fields
are initialized correctly in udp4_hwcsum/udp6_hwcsum_outgoing. So no
need to test for ip_summed == CHECKSUM_PARTIAL first.
This revises an existing fix mentioned in the Fixes tag, which broke
small packets with GSO offload, as detected by kselftests.
Link: https://syzkaller.appspot.com/bug?extid=e1db31216c789f552871
Link: https://lore.kernel.org/netdev/20240723223109.2196886-1-kuba@kernel.org
Fixes: e269d79c7d35 ("net: missing check virtio")
Cc: stable@vger.kernel.org
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240729201108.1615114-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 77baa5bafcbe1b2a15ef9c37232c21279c95481c upstream.
In extreme test scenarios:
the 14th field utime in /proc/xx/stat is greater than sum_exec_runtime,
utime = 18446744073709518790 ns, rtime = 135989749728000 ns
In cputime_adjust() process, stime is greater than rtime due to
mul_u64_u64_div_u64() precision problem.
before call mul_u64_u64_div_u64(),
stime = 175136586720000, rtime = 135989749728000, utime = 1416780000.
after call mul_u64_u64_div_u64(),
stime = 135989949653530
unsigned reversion occurs because rtime is less than stime.
utime = rtime - stime = 135989749728000 - 135989949653530
= -199925530
= (u64)18446744073709518790
Trigger condition:
1). User task run in kernel mode most of time
2). ARM64 architecture
3). TICK_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
Fix mul_u64_u64_div_u64() conversion precision by reset stime to rtime
Fixes: 3dc167ba57 ("sched/cputime: Improve cputime_adjust()")
Signed-off-by: Zheng Zucheng <zhengzucheng@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20240726023235.217771-1-zhengzucheng@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81a91abab1307d7725fa4620952c0767beae7753 upstream.
lpic_gsi_to_irq() should return a valid Linux interrupt number if
acpi_register_gsi() succeeds, and return 0 otherwise. But lpic_gsi_to_irq()
converts a negative return value of acpi_register_gsi() to a positive value
silently.
Convert the return value explicitly.
Fixes: e8bba72b39 ("irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch")
Reported-by: Miao Wang <shankerwangmiao@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240723064508.35560-1-chenhuacai@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82dbb57ac8d06dfe8227ba9ab11a49de2b475ae5 upstream.
Some firmware versions of the 9600 series SAS HBA byte-swap the REPORT
ZONES command reply buffer from ATA-ZAC devices by directly accessing the
buffer in the host memory. This does not respect the default command DMA
direction and causes IOMMU page faults on architectures with an IOMMU
enforcing write-only mappings for DMA_FROM_DEVICE DMA driection (e.g. AMD
hosts).
scsi 18:0:0:0: Direct-Access-ZBC ATA WDC WSH722020AL W870 PQ: 0 ANSI: 6
scsi 18:0:0:0: SATA: handle(0x0027), sas_addr(0x300062b2083e7c40), phy(0), device_name(0x5000cca29dc35e11)
scsi 18:0:0:0: enclosure logical id (0x300062b208097c40), slot(0)
scsi 18:0:0:0: enclosure level(0x0000), connector name( C0.0)
scsi 18:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 18:0:0:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1)
sd 18:0:0:0: Attached scsi generic sg2 type 20
sd 18:0:0:0: [sdc] Host-managed zoned block device
mpt3sas 0000:41:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0xfff9b200 flags=0x0050]
mpt3sas 0000:41:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0xfff9b300 flags=0x0050]
mpt3sas_cm0: mpt3sas_ctl_pre_reset_handler: Releasing the trace buffer due to adapter reset.
mpt3sas_cm0 fault info from func: mpt3sas_base_make_ioc_ready
mpt3sas_cm0: fault_state(0x2666)!
mpt3sas_cm0: sending diag reset !!
mpt3sas_cm0: diag reset: SUCCESS
sd 18:0:0:0: [sdc] REPORT ZONES start lba 0 failed
sd 18:0:0:0: [sdc] REPORT ZONES: Result: hostbyte=DID_RESET driverbyte=DRIVER_OK
sd 18:0:0:0: [sdc] 0 4096-byte logical blocks: (0 B/0 B)
Avoid such issue by always mapping the buffer of REPORT ZONES commands
using DMA_BIDIRECTIONAL (read+write IOMMU mapping). This is done by
introducing the helper function _base_scsi_dma_map() and using this helper
in _base_build_sg_scmd() and _base_build_sg_scmd_ieee() instead of calling
directly scsi_dma_map().
Fixes: 471ef9d4e4 ("mpt3sas: Build MPI SGL LIST on GEN2 HBAs and IEEE SGL LIST on GEN3 HBAs")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240719073913.179559-3-dlemoal@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b88f55389ad27f05ed84af9e1026aa64dbfabc9a upstream.
The kernel sleep profile is no longer working due to a recursive locking
bug introduced by commit 42a20f86dc ("sched: Add wrapper for get_wchan()
to keep task blocked")
Booting with the 'profile=sleep' kernel command line option added or
executing
# echo -n sleep > /sys/kernel/profiling
after boot causes the system to lock up.
Lockdep reports
kthreadd/3 is trying to acquire lock:
ffff93ac82e08d58 (&p->pi_lock){....}-{2:2}, at: get_wchan+0x32/0x70
but task is already holding lock:
ffff93ac82e08d58 (&p->pi_lock){....}-{2:2}, at: try_to_wake_up+0x53/0x370
with the call trace being
lock_acquire+0xc8/0x2f0
get_wchan+0x32/0x70
__update_stats_enqueue_sleeper+0x151/0x430
enqueue_entity+0x4b0/0x520
enqueue_task_fair+0x92/0x6b0
ttwu_do_activate+0x73/0x140
try_to_wake_up+0x213/0x370
swake_up_locked+0x20/0x50
complete+0x2f/0x40
kthread+0xfb/0x180
However, since nobody noticed this regression for more than two years,
let's remove 'profile=sleep' support based on the assumption that nobody
needs this functionality.
Fixes: 42a20f86dc ("sched: Add wrapper for get_wchan() to keep task blocked")
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ed0172af5d6fc07d1b40ca82f5ca3979300369f7 ]
We've observed NFS clients with sync tasks sleeping in __rpc_execute
waiting on RPC_TASK_QUEUED that have not responded to a wake-up from
rpc_make_runnable(). I suspect this problem usually goes unnoticed,
because on a busy client the task will eventually be re-awoken by another
task completion or xprt event. However, if the state manager is draining
the slot table, a sync task missing a wake-up can result in a hung client.
We've been able to prove that the waker in rpc_make_runnable() successfully
calls wake_up_bit() (ie- there's no race to tk_runstate), but the
wake_up_bit() call fails to wake the waiter. I suspect the waker is
missing the load of the bit's wait_queue_head, so waitqueue_active() is
false. There are some very helpful comments about this problem above
wake_up_bit(), prepare_to_wait(), and waitqueue_active().
Fix this by inserting smp_mb__after_atomic() before the wake_up_bit(),
which pairs with prepare_to_wait() calling set_current_state().
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf365071ea92b9579d5a272679b74052a5643e35 ]
When a task waiting for completion of a Store Data operation is
interrupted, an attempt is made to halt this operation. If this attempt
fails due to a hardware or firmware problem, there is a chance that the
SCLP facility might store data into buffers referenced by the original
operation at a later time.
Handle this situation by not releasing the referenced data buffers if
the halt attempt fails. For current use cases, this might result in a
leak of few pages of memory in case of a rare hardware/firmware
malfunction.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc102aa24638b90e04364d64e4f58a1fa91a1976 ]
The new_bh is from alloc_buffer_head, we should call free_buffer_head to
free it in error case.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240514112438.1269037-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8dc9c3da79c84b13fdb135e2fb0a149a8175bffe ]
Syzbot has found an uninit-value bug in ext4_inlinedir_to_tree
This error happens because ext4_inlinedir_to_tree does not
handle the case when ext4fs_dirhash returns an error
This can be avoided by checking the return value of ext4fs_dirhash
and propagating the error,
similar to how it's done with ext4_htree_store_dirent
Signed-off-by: Xiaxi Shen <shenxiaxi26@gmail.com>
Reported-and-tested-by: syzbot+eaba5abe296837a640c0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=eaba5abe296837a640c0
Link: https://patch.msgid.link/20240501033017.220000-1-shenxiaxi26@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68594cec291ff9523b9feb3f43fd853dcddd1f60 ]
syzkaller reported use-after-free in load_firmware_cb() [1].
The reason is because the module allocated a struct tuner in tuner_probe(),
and then the module initialization failed, the struct tuner was released.
A worker which created during module initialization accesses this struct
tuner later, it caused use-after-free.
The process is as follows:
task-6504 worker_thread
tuner_probe <= alloc dvb_frontend [2]
...
request_firmware_nowait <= create a worker
...
tuner_remove <= free dvb_frontend
...
request_firmware_work_func <= the firmware is ready
load_firmware_cb <= but now the dvb_frontend has been freed
To fix the issue, check the dvd_frontend in load_firmware_cb(), if it is
null, report a warning and just return.
[1]:
==================================================================
BUG: KASAN: use-after-free in load_firmware_cb+0x1310/0x17a0
Read of size 8 at addr ffff8000d7ca2308 by task kworker/2:3/6504
Call trace:
load_firmware_cb+0x1310/0x17a0
request_firmware_work_func+0x128/0x220
process_one_work+0x770/0x1824
worker_thread+0x488/0xea0
kthread+0x300/0x430
ret_from_fork+0x10/0x20
Allocated by task 6504:
kzalloc
tuner_probe+0xb0/0x1430
i2c_device_probe+0x92c/0xaf0
really_probe+0x678/0xcd0
driver_probe_device+0x280/0x370
__device_attach_driver+0x220/0x330
bus_for_each_drv+0x134/0x1c0
__device_attach+0x1f4/0x410
device_initial_probe+0x20/0x30
bus_probe_device+0x184/0x200
device_add+0x924/0x12c0
device_register+0x24/0x30
i2c_new_device+0x4e0/0xc44
v4l2_i2c_new_subdev_board+0xbc/0x290
v4l2_i2c_new_subdev+0xc8/0x104
em28xx_v4l2_init+0x1dd0/0x3770
Freed by task 6504:
kfree+0x238/0x4e4
tuner_remove+0x144/0x1c0
i2c_device_remove+0xc8/0x290
__device_release_driver+0x314/0x5fc
device_release_driver+0x30/0x44
bus_remove_device+0x244/0x490
device_del+0x350/0x900
device_unregister+0x28/0xd0
i2c_unregister_device+0x174/0x1d0
v4l2_device_unregister+0x224/0x380
em28xx_v4l2_init+0x1d90/0x3770
The buggy address belongs to the object at ffff8000d7ca2000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 776 bytes inside of
2048-byte region [ffff8000d7ca2000, ffff8000d7ca2800)
The buggy address belongs to the page:
page:ffff7fe00035f280 count:1 mapcount:0 mapping:ffff8000c001f000 index:0x0
flags: 0x7ff800000000100(slab)
raw: 07ff800000000100 ffff7fe00049d880 0000000300000003 ffff8000c001f000
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8000d7ca2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8000d7ca2280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8000d7ca2300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8000d7ca2380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8000d7ca2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
[2]
Actually, it is allocated for struct tuner, and dvb_frontend is inside.
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e3d55fbd160b3ca376599a68b4cddfdc67d4153 ]
The bandwidth fixup quirk doesn't know that SuperSpeed exists and has
the same 8 service intervals per millisecond as High Speed, hence its
calculations are wrong.
Assume that all speeds from HS up use 8 intervals per millisecond.
No further changes are needed, updated code has been confirmed to work
with all speeds from FS to SS.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240414190040.2255a0bc@foxbook
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5cd7c25f6f0576073b3d03bc4cfb1e8ca63a1195 ]
Some SunplusIT cameras took a borderline interpretation of the UVC 1.5
standard, and fill the PTS and SCR fields with invalid data if the
package does not contain data.
"STC must be captured when the first video data of a video frame is put
on the USB bus."
Some SunplusIT devices send, e.g.,
buffer: 0xa7755c00 len 000012 header:0x8c stc 00000000 sof 0000 pts 00000000
buffer: 0xa7755c00 len 000012 header:0x8c stc 00000000 sof 0000 pts 00000000
buffer: 0xa7755c00 len 000668 header:0x8c stc 73779dba sof 070c pts 7376d37a
While the UVC specification meant that the first two packets shouldn't
have had the SCR bit set in the header.
This borderline/buggy interpretation has been implemented in a variety
of devices, from directly SunplusIT and from other OEMs that rebrand
SunplusIT products. So quirking based on VID:PID will be problematic.
All the affected modules have the following extension unit:
VideoControl Interface Descriptor:
guidExtensionCode {82066163-7050-ab49-b8cc-b3855e8d221d}
But the vendor plans to use that GUID in the future and fix the bug,
this means that we should use heuristic to figure out the broken
packets.
This patch takes care of this.
lsusb of one of the affected cameras:
Bus 001 Device 003: ID 1bcf:2a01 Sunplus Innovation Technology Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.01
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x1bcf Sunplus Innovation Technology Inc.
idProduct 0x2a01
bcdDevice 0.02
iManufacturer 1 SunplusIT Inc
iProduct 2 HanChen Wise Camera
iSerial 3 01.00.00
bNumConfigurations 1
Tested-by: HungNien Chen <hn.chen@sunplusit.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20240323-resend-hwtimestamp-v10-2-b08e590d97c7@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38e6f715b02b572f74677eb2f29d3b4bc6f1ddff ]
This commit adds a null check for the 'afb' variable in the
amdgpu_dm_plane_handle_cursor_update function. Previously, 'afb' was
assumed to be null, but was used later in the code without a null check.
This could potentially lead to a null pointer dereference.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1298 amdgpu_dm_plane_handle_cursor_update() error: we previously assumed 'afb' could be null (see line 1252)
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 065927b51eb1f042c3e026cebfd55e72ccc26093 ]
There is no need to add a lock in s_ctrl callback, it has been
synchronized by the ctrl_handler's lock, otherwise it may led to
a deadlock if the driver calls v4l2_ctrl_s_ctrl().
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e864180ee49b4d30e640fd1e1d852b86411420c9 ]
flush_gpu_tlb may be called from another thread while
device_gpu_recover is running.
Both of these threads access registers through the VF
RLCG interface during VF Full Access. Add a lock around this interface
to prevent race conditions between these threads.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 030ffd4d43b433bc6671d9ec34fc12c59220b95d ]
When user space sets an invalid ta type, the pointer context will be empty.
So it need to check the pointer context before using it
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d19fb10085a49b77578314f69fff21562f7cd054 ]
Check the pointer value to fix potential null pointer
dereference
Acked-by: Yang Wang<kevinyang.wang@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c11d30c95576937c6c35e6f29884761f2dddb43 ]
Check ras_manager before using it
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c02c1960c93eede587576625a1221205a68a904f ]
optimize the code to avoid pass a null pointer (hwmgr->backend)
to function smu7_update_edc_leakage_table.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f683f24093dd94a831085fe0ea8e9dc4c6c1a2d1 ]
Function .set_power_profile_mode need an array as input
parameter. So define variable workload as an array to fix
the below coverity warning.
"Passing &workload to function hwmgr->hwmgr_func->set_power_profile_mode
which uses it as an array. This might corrupt or misinterpret adjacent
memory locations"
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22a5daaec0660dd19740c4c6608b78f38760d1e6 ]
Clear resource leak warning that when the prepare fails,
the allocated amdgpu job object will never be released.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10839ee6a977ed1f7d0f4deb29f2d7e5d1f2a9dd ]
[WHY]
Avoid race condition which puts LTTPR into bad state during UHBR LT.
[HOW]
Delay 30ms between starting UHBR TPS1 PHY output and sending TPS1 via DPCD.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guenter Roeck