xfs_log_sbcount() calls xfs_sync_sb() to sync superblock counters to
disk when lazy superblock accounting is enabled. This occurs on
unmount, freeze, and read-only (re)mount and ensures the final
values are calculated and persisted to disk before each form of
quiesce completes.
Now that log covering occurs in all of these contexts and uses the
same xfs_sync_sb() mechanism to update log state, there is no need
to log the superblock separately for any reason. Update the log
quiesce path to sync the superblock at least once for any mount
where lazy superblock accounting is enabled. If the log is already
covered, it will remain in the covered state. Otherwise, the next
sync as part of the normal covering sequence will carry the
associated superblock update with it. Remove xfs_log_sbcount() now
that it is no longer needed.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Merge xfs_getsb into its only caller, and clean that one up a little bit
as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Inode reclaim will still throttle direct reclaim on the per-ag
reclaim locks. This is no longer necessary as reclaim can run
non-blocking now. Hence we can remove these locks so that we don't
arbitrarily block reclaimers just because there are more direct
reclaimers than there are AGs.
This can result in multiple reclaimers working on the same range of
an AG, but this doesn't cause any apparent issues. Optimising the
spread of concurrent reclaimers for best efficiency can be done in a
future patchset.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
It's a global atomic counter, and we are hitting it at a rate of
half a million transactions a second, so it's bouncing the counter
cacheline all over the place on large machines. We don't actually
need it anymore - it used to be required because the VFS freeze code
could not track/prevent filesystem transactions that were running,
but that problem no longer exists.
Hence to remove the counter, we simply have to ensure that nothing
calls xfs_sync_sb() while we are trying to quiesce the filesytem.
That only happens if the log worker is still running when we call
xfs_quiesce_attr(). The log worker is cancelled at the end of
xfs_quiesce_attr() by calling xfs_log_quiesce(), so just call it
early here and then we can remove the counter altogether.
Concurrent create, 50 million inodes, identical 16p/16GB virtual
machines on different physical hosts. Machine A has twice the CPU
cores per socket of machine B:
unpatched patched
machine A: 3m16s 2m00s
machine B: 4m04s 4m05s
Create rates:
unpatched patched
machine A: 282k+/-31k 468k+/-21k
machine B: 231k+/-8k 233k+/-11k
Concurrent rm of same 50 million inodes:
unpatched patched
machine A: 6m42s 2m33s
machine B: 4m47s 4m47s
The transaction rate on the fast machine went from just under
300k/sec to 700k/sec, which indicates just how much of a bottleneck
this atomic counter was.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Seeing massive cpu usage from xfs_agino_range() on one machine;
instruction level profiles look similar to another machine running
the same workload, only one machine is consuming 10x as much CPU as
the other and going much slower. The only real difference between
the two machines is core count per socket. Both are running
identical 16p/16GB virtual machine configurations
Machine A:
25.83% [k] xfs_agino_range
12.68% [k] __xfs_dir3_data_check
6.95% [k] xfs_verify_ino
6.78% [k] xfs_dir2_data_entry_tag_p
3.56% [k] xfs_buf_find
2.31% [k] xfs_verify_dir_ino
2.02% [k] xfs_dabuf_map.constprop.0
1.65% [k] xfs_ag_block_count
And takes around 13 minutes to remove 50 million inodes.
Machine B:
13.90% [k] __pv_queued_spin_lock_slowpath
3.76% [k] do_raw_spin_lock
2.83% [k] xfs_dir3_leaf_check_int
2.75% [k] xfs_agino_range
2.51% [k] __raw_callee_save___pv_queued_spin_unlock
2.18% [k] __xfs_dir3_data_check
2.02% [k] xfs_log_commit_cil
And takes around 5m30s to remove 50 million inodes.
Suspect is cacheline contention on m_sectbb_log which is used in one
of the macros in xfs_agino_range. This is a read-only variable but
shares a cacheline with m_active_trans which is a global atomic that
gets bounced all around the machine.
The workload is trying to run hundreds of thousands of transactions
per second and hence cacheline contention will be occurring on this
atomic counter. Hence xfs_agino_range() is likely just be an
innocent bystander as the cache coherency protocol fights over the
cacheline between CPU cores and sockets.
On machine A, this rearrangement of the struct xfs_mount
results in the profile changing to:
9.77% [kernel] [k] xfs_agino_range
6.27% [kernel] [k] __xfs_dir3_data_check
5.31% [kernel] [k] __pv_queued_spin_lock_slowpath
4.54% [kernel] [k] xfs_buf_find
3.79% [kernel] [k] do_raw_spin_lock
3.39% [kernel] [k] xfs_verify_ino
2.73% [kernel] [k] __raw_callee_save___pv_queued_spin_unlock
Vastly less CPU usage in xfs_agino_range(), but still 3x the amount
of machine B and still runs substantially slower than it should.
Current rm -rf of 50 million files:
vanilla patched
machine A 13m20s 6m42s
machine B 5m30s 5m02s
It's an improvement, hence indicating that separation and further
optimisation of read-only global filesystem data is worthwhile, but
it clearly isn't the underlying issue causing this specific
performance degradation.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Shaokun Zhang reported that XFS was using substantial CPU time in
percpu_count_sum() when running a single threaded benchmark on
a high CPU count (128p) machine from xfs_mod_ifree(). The issue
is that the filesystem is empty when the benchmark runs, so inode
allocation is running with a very low inode free count.
With the percpu counter batching, this means comparisons when the
counter is less that 128 * 256 = 32768 use the slow path of adding
up all the counters across the CPUs, and this is expensive on high
CPU count machines.
The summing in xfs_mod_ifree() is only used to fire an assert if an
underrun occurs. The error is ignored by the higher level code.
Hence this is really just debug code and we don't need to run it
on production kernels, nor do we need such debug checks to return
error values just to trigger an assert.
Finally, xfs_mod_icount/xfs_mod_ifree are only called from
xfs_trans_unreserve_and_mod_sb(), so get rid of them and just
directly call the percpu_counter_add/percpu_counter_compare
functions. The compare functions are now run only on debug builds as
they are internal to ASSERT() checks and so only compiled in when
ASSERTs are active (CONFIG_XFS_DEBUG=y or CONFIG_XFS_WARN=y).
Reported-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Both types control shutdown messaging and neither is used in the
current codebase.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
As agreed upon[1]. We make the dax mount option a tri-state. '-o dax'
continues to operate the same. We add 'always', 'never', and 'inode'
(default).
[1] https://lore.kernel.org/lkml/20200405061945.GA94792@iweiny-DESK2.sc.intel.com/
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In prep for the new tri-state mount option which then introduces
XFS_MOUNT_DAX_NEVER.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move the inode dirty data flushing to a workqueue so that multiple
threads can take advantage of a single thread's flushing work. The
ratelimiting technique used in bdd4ee4 was not successful, because
threads that skipped the inode flush scan due to ratelimiting would
ENOSPC early, which caused occasional (but noticeable) changes in
behavior and sporadic fstest regressions.
Therefore, make all the writer threads wait on a single inode flush,
which eliminates both the stampeding hordes of flushers and the small
window in which a write could fail with ENOSPC because it lost the
ratelimit race after even another thread freed space.
Fixes: c6425702f2 ("xfs: ratelimit inode flush on buffered write ENOSPC")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
A customer reported rcu stalls and softlockup warnings on a computer
with many CPU cores and many many more IO threads trying to write to a
filesystem that is totally out of space. Subsequent analysis pointed to
the many many IO threads calling xfs_flush_inodes -> sync_inodes_sb,
which causes a lot of wb_writeback_work to be queued. The writeback
worker spends so much time trying to wake the many many threads waiting
for writeback completion that it trips the softlockup detector, and (in
this case) the system automatically reboots.
In addition, they complain that the lengthy xfs_flush_inodes scan traps
all of those threads in uninterruptible sleep, which hampers their
ability to kill the program or do anything else to escape the situation.
If there's thousands of threads trying to write to files on a full
filesystem, each of those threads will start separate copies of the
inode flush scan. This is kind of pointless since we only need one
scan, so rate limit the inode flush.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Remove some unused typedef'd simple types, and some unused
structure members.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Instead of causing a relatively expensive indirect call for each
hashing and comparism of a file name in a directory just use an
inline function and a simple branch on the ASCII CI bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix unused variable warning]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move the node header size field to struct xfs_da_geometry, and remove
the now unused non-directory dir ops infrastructure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Eliminate struct xfs_mount field m_fsname by using the super block s_id
field directly.
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The struct xfs_mount field m_fsname_len is not used anywhere, remove it.
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace XFS_MOUNT_COMPAT_IOSIZE with an inverted XFS_MOUNT_LARGEIO flag
that makes the usage more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Make the flag match the mount option and usage.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Rework xfs_parseargs to fill out the default value and then parse the
option directly into the mount structure, similar to what we do for
other updates, and open code the now trivial updates based on on the
on-disk superblock directly into xfs_mountfs.
Note that this change rejects the allocsize=0 mount option that has been
documented as invalid for a long time instead of just ignoring it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use the allocsize name to match the mount option and usage instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
m_readio_blocks is entirely unused, and m_readio_blocks is only used in
xfs_stat_blksize in a max statements that is a no-op as it always has
the same value as m_writeio_log.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The -o wsync allocsize overwrite overwrite was part of a special hack
for NFSv2 servers in IRIX and has no real purpose in modern Linux, so
remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move xfs_preferred_iosize to xfs_iops.c, unobsfucate it and also handle
the realtime special case in the helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When trying to correlate XFS kernel allocations to memory reclaim
behaviour, it is useful to know what allocations XFS is actually
attempting. This information is not directly available from
tracepoints in the generic memory allocation and reclaim
tracepoints, so these new trace points provide a high level
indication of what the XFS memory demand actually is.
There is no per-filesystem context in this code, so we just trace
the type of allocation, the size and the allocation constraints.
The kmem code also doesn't include much of the common XFS headers,
so there are a few definitions that need to be added to the trace
headers and a couple of types that need to be made common to avoid
needing to include the whole world in the kmem code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move the workqueue used for log I/O completions from struct xfs_mount
to struct xlog to keep it self contained in the log code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: destroy the log workqueue after ensuring log ios are done]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The flags value is always passed as 0 so remove the argument.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Separate the inode geometry information into a distinct structure.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add a percpu counter to track the number of blocks directly reserved for
delayed allocations on the data device. This counter (in contrast to
i_delayed_blks) does not track allocated CoW staging extents or anything
going on with the realtime device. It will be used in the upcoming
summary counter scrub function to check the free block counts without
having to freeze the filesystem or walk all the inodes to find the
delayed allocations.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Now that we're no longer using m_data_workqueue, remove it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Replace the BAD_SUMMARY mount flag with calls to the equivalent health
tracking code.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add the necessary in-core metadata fields to keep track of which parts
of the filesystem have been observed and which parts were observed to be
unhealthy, and print a warning at unmount time if we have unfixed
problems.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add a mode where XFS never overwrites existing blocks in place. This
is to aid debugging our COW code, and also put infatructure in place
for things like possible future support for zoned block devices, which
can't support overwrites.
This mode is enabled globally by doing a:
echo 1 > /sys/fs/xfs/debug/always_cow
Note that the parameter is global to allow running all tests in xfstests
easily in this mode, which would not easily be possible with a per-fs
sysfs file.
In always_cow mode persistent preallocations are disabled, and fallocate
will fail when called with a 0 mode (with our without
FALLOC_FL_KEEP_SIZE), and not create unwritten extent for zeroed space
when called with FALLOC_FL_ZERO_RANGE or FALLOC_FL_UNSHARE_RANGE.
There are a few interesting xfstests failures when run in always_cow
mode:
- generic/392 fails because the bytes used in the file used to test
hole punch recovery are less after the log replay. This is
because the blocks written and then punched out are only freed
with a delay due to the logging mechanism.
- xfs/170 will fail as the already fragile file streams mechanism
doesn't seem to interact well with the COW allocator
- xfs/180 xfs/182 xfs/192 xfs/198 xfs/204 and xfs/208 will claim
the file system is badly fragmented, but there is not much we
can do to avoid that when always writing out of place
- xfs/205 fails because overwriting a file in always_cow mode
will require new space allocation and the assumption in the
test thus don't work anymore.
- xfs/326 fails to modify the file at all in always_cow mode after
injecting the refcount error, leading to an unexpected md5sum
after the remount, but that again is expected
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Rename this flag variable to imply more strongly that it's related to
the free inode btree (finobt) operation. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Use a rhashtable to cache the unlinked list incore. This should speed
up unlinked processing considerably when there are a lot of inodes on
the unlinked list because iunlink_remove no longer has to traverse an
entire bucket list to find which inode points to the one being removed.
The incore list structure records "X.next_unlinked = Y" relations, with
the rhashtable using Y to index the records. This makes finding the
inode X that points to a inode Y very quick. If our cache fails to find
anything we can always fall back on the old method.
FWIW this drastically reduces the amount of time it takes to remove
inodes from the unlinked list. I wrote a program to open a lot of
O_TMPFILE files and then close them in the same order, which takes
a very long time if we have to traverse the unlinked lists. With the
ptach, I see:
+ /d/t/tmpfile/tmpfile
Opened 193531 files in 6.33s.
Closed 193531 files in 5.86s
real 0m12.192s
user 0m0.064s
sys 0m11.619s
+ cd /
+ umount /mnt
real 0m0.050s
user 0m0.004s
sys 0m0.030s
And without the patch:
+ /d/t/tmpfile/tmpfile
Opened 193588 files in 6.35s.
Closed 193588 files in 751.61s
real 12m38.853s
user 0m0.084s
sys 12m34.470s
+ cd /
+ umount /mnt
real 0m0.086s
user 0m0.000s
sys 0m0.060s
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The realtime summary is a two-dimensional array on disk, effectively:
u32 rsum[log2(number of realtime extents) + 1][number of blocks in the bitmap]
rsum[log][bbno] is the number of extents of size 2**log which start in
bitmap block bbno.
xfs_rtallocate_extent_near() uses xfs_rtany_summary() to check whether
rsum[log][bbno] != 0 for any log level. However, the summary array is
stored in row-major order (i.e., like an array in C), so all of these
entries are not adjacent, but rather spread across the entire summary
file. In the worst case (a full bitmap block), xfs_rtany_summary() has
to check every level.
This means that on a moderately-used realtime device, an allocation will
waste a lot of time finding, reading, and releasing buffers for the
realtime summary. In particular, one of our storage services (which runs
on servers with 8 very slow CPUs and 15 8 TB XFS realtime filesystems)
spends almost 5% of its CPU cycles in xfs_rtbuf_get() and
xfs_trans_brelse() called from xfs_rtany_summary().
One solution would be to also store the summary with the dimensions
swapped. However, this would require a disk format change to a very old
component of XFS.
Instead, we can cache the minimum size which contains any extents. We do
so lazily; rather than guaranteeing that the cache contains the precise
minimum, it always contains a loose lower bound which we tighten when we
read or update a summary block. This only uses a few kilobytes of memory
and is already serialized via the realtime bitmap and summary inode
locks, so the cost is minimal. With this change, the same workload only
spends 0.2% of its CPU cycles in the realtime allocator.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Store the inode cluster alignment information in units of inodes and
blocks in the mount data so that we don't have to keep recalculating
them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Store the number of inodes and blocks per inode cluster in the mount
data so that we don't have to keep recalculating them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The barrier mount options have been no-ops and deprecated since
4cf4573 xfs: deprecate barrier/nobarrier mount option
i.e. kernel 4.10 / December 2016, with a stated deprecation schedule
after v4.15. Should be fair game to remove them now.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use the "bad summary count" mount flag from the previous patch to skip
writing the unmount record to force log recovery at the next mount,
which will recalculate the summary counters for us.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Filippo Giunchedi complained that xfs doesn't even perform basic sanity
checks of the fs summary counters at mount time. Therefore, recalculate
the summary counters from the AGFs after log recovery if the counts were
bad (or we had to recover the fs). Enhance the recalculation routine to
fail the mount entirely if the new values are also obviously incorrect.
We use a mount state flag to record the "bad summary count" state so
that the (subsequent) online fsck patches can detect subtlely incorrect
counts and set the flag; clear it userspace asks for a repair; or force
a recalculation at the next mount if nobody fixes it by unmount time.
Reported-by: Filippo Giunchedi <fgiunchedi@wikimedia.org>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Get rid of the MIN/MAX macros and just use the native min/max macros
directly in the XFS code.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove the verbose license text from XFS files and replace them
with SPDX tags. This does not change the license of any of the code,
merely refers to the common, up-to-date license files in LICENSES/
This change was mostly scripted. fs/xfs/Makefile and
fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected
and modified by the following command:
for f in `git grep -l "GNU General" fs/xfs/` ; do
echo $f
cat $f | awk -f hdr.awk > $f.new
mv -f $f.new $f
done
And the hdr.awk script that did the modification (including
detecting the difference between GPL-2.0 and GPL-2.0+ licenses)
is as follows:
$ cat hdr.awk
BEGIN {
hdr = 1.0
tag = "GPL-2.0"
str = ""
}
/^ \* This program is free software/ {
hdr = 2.0;
next
}
/any later version./ {
tag = "GPL-2.0+"
next
}
/^ \*\// {
if (hdr > 0.0) {
print "// SPDX-License-Identifier: " tag
print str
print $0
str=""
hdr = 0.0
next
}
print $0
next
}
/^ \* / {
if (hdr > 1.0)
next
if (hdr > 0.0) {
if (str != "")
str = str "\n"
str = str $0
next
}
print $0
next
}
/^ \*/ {
if (hdr > 0.0)
next
print $0
next
}
// {
if (hdr > 0.0) {
if (str != "")
str = str "\n"
str = str $0
next
}
print $0
}
END { }
$
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The struct xfs_agfl v5 header was originally introduced with
unexpected padding that caused the AGFL to operate with one less
slot than intended. The header has since been packed, but the fix
left an incompatibility for users who upgrade from an old kernel
with the unpacked header to a newer kernel with the packed header
while the AGFL happens to wrap around the end. The newer kernel
recognizes one extra slot at the physical end of the AGFL that the
previous kernel did not. The new kernel will eventually attempt to
allocate a block from that slot, which contains invalid data, and
cause a crash.
This condition can be detected by comparing the active range of the
AGFL to the count. While this detects a padding mismatch, it can
also trigger false positives for unrelated flcount corruption. Since
we cannot distinguish a size mismatch due to padding from unrelated
corruption, we can't trust the AGFL enough to simply repopulate the
empty slot.
Instead, avoid unnecessarily complex detection logic and and use a
solution that can handle any form of flcount corruption that slips
through read verifiers: distrust the entire AGFL and reset it to an
empty state. Any valid blocks within the AGFL are intentionally
leaked. This requires xfs_repair to rectify (which was already
necessary based on the state the AGFL was found in). The reset
mitigates the side effect of the padding mismatch problem from a
filesystem crash to a free space accounting inconsistency. The
generic approach also means that this patch can be safely backported
to kernels with or without a packed struct xfs_agfl.
Check the AGF for an invalid freelist count on initial read from
disk. If detected, set a flag on the xfs_perag to indicate that a
reset is required before the AGFL can be used. In the first
transaction that attempts to use a flagged AGFL, reset it to empty,
warn the user about the inconsistency and allow the freelist fixup
code to repopulate the AGFL with new blocks. The xfs_perag flag is
cleared to eliminate the need for repeated checks on each block
allocation operation.
This allows kernels that include the packing fix commit 96f859d52b
("libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct")
to handle older unpacked AGFL formats without a filesystem crash.
Suggested-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by Dave Chiluk <chiluk+linuxxfs@indeed.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The rmapbt perag metadata reservation reserves blocks for the
reverse mapping btree (rmapbt). Since the rmapbt uses blocks from
the agfl and perag accounting is updated as blocks are allocated
from the allocation btrees, the reservation actually accounts blocks
as they are allocated to (or freed from) the agfl rather than the
rmapbt itself.
While this works for blocks that are eventually used for the rmapbt,
not all agfl blocks are destined for the rmapbt. Blocks that are
allocated to the agfl (and thus "reserved" for the rmapbt) but then
used by another structure leads to a growing inconsistency over time
between the runtime tracking of rmapbt usage vs. actual rmapbt
usage. Since the runtime tracking thinks all agfl blocks are rmapbt
blocks, it essentially believes that less future reservation is
required to satisfy the rmapbt than what is actually necessary.
The inconsistency is rectified across mount cycles because the perag
reservation is initialized based on the actual rmapbt usage at mount
time. The problem, however, is that the excessive drain of the
reservation at runtime opens a window to allocate blocks for other
purposes that might be required for the rmapbt on a subsequent
mount. This problem can be demonstrated by a simple test that runs
an allocation workload to consume agfl blocks over time and then
observe the difference in the agfl reservation requirement across an
unmount/mount cycle:
mount ...: xfs_ag_resv_init: ... resv 3193 ask 3194 len 3194
...
... : xfs_ag_resv_alloc_extent: ... resv 2957 ask 3194 len 1
umount...: xfs_ag_resv_free: ... resv 2956 ask 3194 len 0
mount ...: xfs_ag_resv_init: ... resv 3052 ask 3194 len 3194
As the above tracepoints show, the reservation requirement reduces
from 3194 blocks to 2956 blocks as the workload runs. Without any
other changes in the filesystem, the same reservation requirement
jumps from 2956 to 3052 blocks over a umount/mount cycle.
To address this divergence, update the RMAPBT reservation to account
blocks used for the rmapbt only rather than all blocks filled into
the agfl. This patch makes several high-level changes toward that
end:
1.) Reintroduce an AGFL reservation type to serve as an accounting
no-op for blocks allocated to (or freed from) the AGFL.
2.) Invoke RMAPBT usage accounting from the actual rmapbt block
allocation path rather than the AGFL allocation path.
The first change is required because agfl blocks are considered free
blocks throughout their lifetime. The perag reservation subsystem is
invoked unconditionally by the allocation subsystem, so we need a
way to tell the perag subsystem (via the allocation subsystem) to
not make any accounting changes for blocks filled into the AGFL.
The second change causes the in-core RMAPBT reservation usage
accounting to remain consistent with the on-disk state at all times
and eliminates the risk of leaving the rmapbt reservation
underfilled.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The AGFL perag reservation type accounts all allocations that feed
into (or are released from) the allocation group free list (agfl).
The purpose of the reservation is to support worst case conditions
for the reverse mapping btree (rmapbt). As such, the agfl
reservation usage accounting only considers rmapbt usage when the
in-core counters are initialized at mount time.
This implementation inconsistency leads to divergence of the in-core
and on-disk usage accounting over time. In preparation to resolve
this inconsistency and adjust the AGFL reservation into an rmapbt
specific reservation, rename the AGFL reservation type and
associated accounting fields to something more rmapbt-specific. Also
fix up a couple tracepoints that incorrectly use the AGFL
reservation type to pass the agfl state of the associated extent
where the raw reservation type is expected.
Note that this patch does not change perag reservation behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The dmevmask structure member is a dmapi leftover; it's
set here and there but never actually used. Remove it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We now have enhanced error injection that can control the frequency
with which errors happen, so convert drop_writes to use this.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Creates a /sys/fs/xfs/$dev/errortag/ directory to control the errortag
values directly. This enables us to control the randomness values,
rather than having to accept the defaults.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Brian Foster