Code after a return will never run, removing this dead code.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the code enclosed in '#if 0'
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The while() loop will only exit in a return or a goto ask_for_joinbss,
which means it will never break and execute the return after it.
Removing return _FAIL since it is dead code.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch to correct two flavors of brace styling issues in
ieee80211_softmac_wx.c.
Signed-off-by: Mike Dupuis <mike.dupuis.0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch to add spaces around = operators in several instances
in ieee80211_softmac_wx.c
Signed-off-by: Mike Dupuis <mike.dupuis.0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch to add missing spaces around == and || operators in one
instance in ieee80211_softmac_wx.c.
Signed-off-by: Mike Dupuis <mike.dupuis.0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch to move opening braces to the lines on which their
corresponding if-statements exist in ieee80211_softmac_wx.c.
Signed-off-by: Mike Dupuis <mike.dupuis.0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch to add blank lines after declaration ins several
instances in iee80211_softmac_wx.c.
Signed-off-by: Mike Dupuis <mike.dupuis.0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a fix to add spaces after commas in ieee80211_softmac_wx.c.
Signed-off-by: Mike Dupuis <mike.dupuis.0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kbuild test robot reports the following build error for
i386-randconfig-c0-09230740:
>> ERROR: "ieee80211_hdrlen" [drivers/staging/rtl8188eu/r8188eu.ko] undefined!
Add a dependency on CFG80211 to fix it.
Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pmlmeinfo->ADDBA_req is accessed three times in this function, but it
contributes to generating lines above 80 characters that are not easy to
split in a nice way.
Extract a pointer to it to make code slightly more concise and fix some
lines over 80 characters.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'pbuf' and 'source' arguments to rtw_set_fixed_ie() are (void *), the
explicit typecasts are not needed. They just make code less readable.
Also fix checkpatch issues in the lines touched:
ERROR: space prohibited before that ',' (ctx:WxW)
WARNING: line over 80 characters
CHECK: Unnecessary parentheses around <var>
Note: some of the modified lines are still over 80 characters because they
are not fixable by just adding newlines. They will be fixed in a later
patch.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_set_ie() is a memcpy-like function, taking addresses of memory buffers
among its parameters. Similarly to memcpy, change the parameters to be
void*. This will allow to get rid of typecasts whenever it is called.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This comment gives pretty much the same information as the name of the
function that it immediately precedes.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge rtl92e_dm_backup_state and _rtl92e_dm_bb_initialgain_backup.
Static function is called only once and dm_backup_state had short body.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use ffs instead of iteration. Behaviour of function doesn't change.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove FSF address from licenses at the beginning of files.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replaced all uses of uintX_t types to uX types, to be
checkpatch clean.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moved kernel-doc comments for non-inline functions
from header files to .c files.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add cmd_flags parameter to all dprc APIs to comply
with the dprc 4.0 MC interface. Updated MC version
major number. Pass irq args in struct instead of
separate args.
dprc 4.0 uses MC-relative offsets to specify object regions,
instead of physical addresses. So, translate_mc_addr() and
struct fsl_mc_addr_translation_range need to be updated
accordingly.
Update commands for 4.0: add new commands 'set/get
obj irq', 'set obj label', 'get obj descriptor'.
Remove 'get portal paddr'.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dpcon object minor version number updated to match latest
MC firmware. This change is needed because the dpcon
object binds to the allocator and the current driver match
logic uses object version numbers.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add cmd_flags parameter to all dpbp APIs to comply
with the dpmcp 2.0 MC interface. Updated version
major number. Pass irq args in struct instead of
separate args.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add cmd_flags parameter to all dpbp APIs to comply
with the dpbp 2.0 MC interface. Updated MC version
major number. Pass irq args in struct instead of
separate args.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add cmd_flags parameter to all dpmng APIs to comply
with 8.0 MC firmware interface. Updated MC version
major number.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Management Complex (MC) binary interface added a new "flags"
field to the command header.
Add the definitions for this field in preparation for adding the
new cmd_flags parameter to all MC interface APIs.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch is intended to fix the checkpatch warning for ``block``
comments for staging/android driver.
Signed-off-by: Sriram Raghunathan <sriram@marirs.net.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The lock in vnt_submit_rx_urb_complete is blocked by TX activity.
The lock comes from a time when RX needed to be synchronized with
other parts of the driver because the WLAN API was in driver.
Since this is now dealt with in mac80211 the lock is unnecessary.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Presently the TX buffer stops while filling the buffer and urb.
However, this does not make use of the available buffer
space, it also lags the speed of the TX troughtput.
Only stop the queue when the buffer becomes full. The
URB complete will start the queue again when a
buffer and URB is available.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device can now operate in low power mode
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device should ready to listen to next beacon so on count down of
wake_up_count == 1.
schedule command WLAN_CMD_TBTT_WAKEUP which calls vnt_next_tbtt_wakeup which
wakes the device.
This restores this back to vendors code with a slight difference the
count down is in the interrupt handler.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The TSF counter is presently unused on driver in infrastructure mode.
It is needed to implement power saving functions and wireless stats that
are passed in interrupt handling.
Ensuring counter is synced with access point beacon.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Presently the TX buffer stops while filling the buffer.
However, this does not make use of the available buffer
space, it also lags the speed of the TX troughtput.
Only stop the queue when the buffer becomes full. The
Interupt handler will start the queue again when a
buffer is available.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The result variable is not set anywhere beyond its initialization,
therefore it can be remove.
Signed-off-by: Tillmann Heidsieck <theidsieck@leenox.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We exit the above loop either if curroff >= (HFA384x_PDA_LEN_MAX / 2 - 1)
or if we found the END marker in the element beyond the current one. The
first case is checked for in the preceding if statement, therefore the
second if statement is redundant and can be removed.
Signed-off-by: Tillmann Heidsieck <theidsieck@leenox.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We test for an END marker in the element beyond the current one, this
effectively limits the size of the array to be HFA384x_PDA_LEN_MAX/2 - 1
not HFA384x_PDR_END_OF_PDA/2. This patch fixes a possible buffer
overflow in case there was no END marker.
Signed-off-by: Tillmann Heidsieck <theidsieck@leenox.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function twoToPowerOfx that iteratively calculates the power of 2
may be replaced with shift operator
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MB(x) and KB(x) macros are not used and therefore they can be
removed
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use SZ_xM defined in linux/sizes.h instead of custom MB(x) macro
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add space between '#include' keyword and the header name
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary space in sm750_help.h to fix the following
checkpatch.pl error:
drivers/staging/sm750fb/sm750_help.h:46: space prohibited after that '~' (ctx:ExW)
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver is using -1 instead of the -ENOMEM defined macro to specify
that a buffer allocation failed. Since the error number is propagated,
the caller will get a -EPERM which is the wrong error condition.
Also, the smatch tool complains with the following warning:
dgap_parsefile() warn: returning -1 instead of -ENOMEM is sloppy
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IEEE80211_STYPE_PROBE_REQ flag appears twice in the expression
and coccicheck complains with:
wilc_wfi_cfgoperations.h:80:3-38: duplicated argument to & or |
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver create a host bus adapter device when s-Par sends a
device create message to create a storage adapter on the visorbus.
When the message is received by visorbus, the visorhba_probe function
is called and the hba device is created and managed by the visorhba
driver.
Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luis de Bethencourt